You are not logged in.

Pages: 1 2

#1 2022-12-09 07:15:08

visious5d
Member
Registered: 2021-02-23
Posts: 26

I can't record my voice

Hi, I can't record my voice on skype and SimpleScreenRecorder. What should i do to fix this issue?

Offline

#2 2022-12-09 07:20:45

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: I can't record my voice

Talk louder. Plug in a microphone...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2022-12-09 10:20:47

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

It's a laptop man. On SimpleScreenRecorder I can record the system sound.

Backed: PulseAudio
Source: Monitor of Built-in Audio Analog Stereo

When I switch to

Backed: PulseAudio
Source: Built-in Audio Analog Stereo

I can't record my voice.

Offline

#4 2022-12-09 10:50:54

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,885

Re: I can't record my voice

Do these work in other applications? What kind of microphone do you have? Where is it plugged in exactly?

Post 

sudo fuser -v /dev/snd/*
arecord -lL
amixer -c0 #Or whatever the correct card index according to arecord -l is
pactl list cards
pactl list sources

in code tags

Offline

#5 2022-12-09 11:15:19

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

I don't have other applications just skype and SimpleScreenRecorder. I forgot to tell you and Guvcview, no sound at all, but I have video capture.

sudo fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  visious     531 F.... pulseaudio
/dev/snd/controlC1:  visious     531 F.... pulseaudio
/dev/snd/pcmC0D0p:   visious     531 F...m pulseaudio
arecord -lL
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=MID
    HDA Intel MID, 92HD75B3X5 Analog
    Default Audio Device
front:CARD=MID,DEV=0
    HDA Intel MID, 92HD75B3X5 Analog
    Front output / input
usbstream:CARD=MID
    HDA Intel MID
    USB Stream Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: 92HD75B3X5 Analog [92HD75B3X5 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
amixer -c0
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 112 [88%] [-11.25dB] [on]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 127 [100%] [0.00dB] [on]
  Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Line Out',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 127 [100%] [0.00dB] [on]
  Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Beep',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 3
  Mono: Playback 0 [0%] [-18.00dB] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 15
  Front Left: Capture 14 [93%] [21.00dB] [on]
  Front Right: Capture 14 [93%] [21.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Internal Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
pactl list cards
Card #0
    Name: alsa_card.pci-0000_01_00.1
    Driver: module-alsa-card.c
    Owner Module: 6
    Properties:
        alsa.card = "1"
        alsa.card_name = "HDA NVidia"
        alsa.long_card_name = "HDA NVidia at 0xd3000000 irq 16"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:01:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
        device.bus = "pci"
        device.vendor.id = "10de"
        device.vendor.name = "NVIDIA Corporation"
        device.product.id = "0be3"
        device.product.name = "High Definition Audio Controller"
        device.string = "1"
        device.description = "High Definition Audio Controller"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    Profiles:
        output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
        output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
        output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
        output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
        output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
        output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
        output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
        off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
    Active Profile: off
    Ports:
        hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
            Properties:
                device.icon_name = "video-display"
            Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
        hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
            Properties:
                device.icon_name = "video-display"
            Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
        hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
            Properties:
                device.icon_name = "video-display"
            Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
        hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
            Properties:
                device.icon_name = "video-display"
            Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #1
    Name: alsa_card.pci-0000_00_1b.0
    Driver: module-alsa-card.c
    Owner Module: 7
    Properties:
        alsa.card = "0"
        alsa.card_name = "HDA Intel MID"
        alsa.long_card_name = "HDA Intel MID at 0xdb100000 irq 27"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1b.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "3b56"
        device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
        device.form_factor = "internal"
        device.string = "0"
        device.description = "Built-in Audio"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    Profiles:
        input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
        output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
        output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 38268, available: yes)
        output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 38333, available: yes)
        output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
        output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 33133, available: yes)
        off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
    Active Profile: output:analog-stereo+input:analog-stereo
    Ports:
        analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability unknown)
            Properties:
                device.icon_name = "audio-input-microphone"
            Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
        analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, not available)
            Properties:
                device.icon_name = "audio-input-microphone"
            Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
        analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available)
            Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
        analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
            Properties:
                device.icon_name = "audio-speakers"
            Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
        iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
            Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
pactl list sources
Source #0
    State: IDLE
    Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
    Description: Monitor of Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
    Latency: 0 usec, configured 2000000 usec
    Flags: DECIBEL_VOLUME LATENCY 
    Properties:
        device.description = "Monitor of Built-in Audio Analog Stereo"
        device.class = "monitor"
        alsa.card = "0"
        alsa.card_name = "HDA Intel MID"
        alsa.long_card_name = "HDA Intel MID at 0xdb100000 irq 27"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1b.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "3b56"
        device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
        device.form_factor = "internal"
        device.string = "0"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    Formats:
        pcm

Source #1
    State: SUSPENDED
    Name: alsa_input.pci-0000_00_1b.0.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 19660 /  30% / -31.37 dB,   front-right: 19660 /  30% / -31.37 dB
            balance 0.00
    Base Volume: 8739 /  13% / -52.50 dB
    Monitor of Sink: n/a
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
    Properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "92HD75B3X5 Analog"
        alsa.id = "92HD75B3X5 Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA Intel MID"
        alsa.long_card_name = "HDA Intel MID at 0xdb100000 irq 27"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1b.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "3b56"
        device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "352800"
        device.buffering.fragment_size = "176400"
        device.access_mode = "mmap+timer"
        device.profile.name = "analog-stereo"
        device.profile.description = "Analog Stereo"
        device.description = "Built-in Audio Analog Stereo"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    Ports:
        analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability unknown)
        analog-input-mic: Microphone (type: Mic, priority: 8700, not available)
    Active Port: analog-input-internal-mic
    Formats:
        pcm

Last edited by visious5d (2022-12-09 16:37:35)

Offline

#6 2022-12-09 11:56:03

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,885

Re: I can't record my voice

Please read my link and ammend the post with code tags as requested.

This might be some wrong detection/inference logic, the Mic control is muted, capture is not 

amixer -c0 set 'Mic',0 100%,100%

does that help?

Offline

#7 2022-12-09 13:01:57

seth
Member
Registered: 2012-09-03
Posts: 52,199

Re: I can't record my voice

Might also require internal/mic boost or

As Jason wrote:

Talk louder.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2022-12-09 13:20:50

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

Nothing ever changes, I have the same results to Skype, SimpleScreenRecorder and Guvcview. Couple of months ago all worked in harmony.

amixer -c0 set 'Mic',0 100%,100%
Simple mixer control 'Mic',0 
Capabilities: pvolume pswitch 
Playback channels: Front Left - Front Right 
Limits: Playback 0 - 31 
Mono: 
Front Left: Playback 31 [100%] [12.00dB] [off]
Front Right: Playback 31 [100%] [12.00dB] [off]

Last edited by visious5d (2022-12-09 16:30:57)

Offline

#9 2022-12-09 13:27:10

seth
Member
Registered: 2012-09-03
Posts: 52,199

Re: I can't record my voice

If you want this to have any chance to continue, edit your posts and properly use code tags, as V1del asked you twice already.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2022-12-09 13:45:09

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

@seth Is it getiing better now? Do you want to change them all? I don't know how to include all the terminal output in codetags.

Last edited by visious5d (2022-12-09 13:52:48)

Offline

#11 2022-12-09 13:54:50

seth
Member
Registered: 2012-09-03
Posts: 52,199

Re: I can't record my voice

Yes.
Every shell IO and file contents should be in a code box to keep the forum page size limited (scrollable) and the text more readable.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2022-12-09 14:05:46

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

Okay, I didn't know that.

Offline

#13 2022-12-09 14:12:40

seth
Member
Registered: 2012-09-03
Posts: 52,199

Re: I can't record my voice

Putting every line into an isolated code block doesn't really help…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#14 2022-12-09 14:17:13

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,885

Re: I can't record my voice

You can put the entire block of output into code tags

Try increasing the volumes involved here 

amixer -c0 set 'Mic',0 on,on
pactl set-source-volume alsa_input.pci-0000_00_1b.0.analog-stereo 100%,100%

Do you get any volume feedback checking/speaking in e.g. pavucontrol?

Last edited by V1del (2022-12-09 14:18:15)

Offline

#15 2022-12-09 14:34:38

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

amixer -c0 set 'Mic',0 on,on
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
pactl set-source-volume alsa_input.pci-0000_00_1b.0.analog-stereo 100%,100%
Invalid volume specification

No, I don't have feedback of my voice.

Last edited by visious5d (2022-12-09 16:31:49)

Offline

#16 2022-12-09 14:41:56

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,885

Re: I can't record my voice

Grr i hate these slight format differences ... but this does remind me, most mics are not actually stereo and there can be weird bugs if the system thinks it is anyway 

pactl set-source-volume alsa_input.pci-0000_00_1b.0.analog-stereo 100% 0

and check/try again, if it didn't work swap the channel you mute, so "0 100%". Also more generally to test whether anything works at all 

arecord -Dhw:0 test.wav

can you record anything with that?

Last edited by V1del (2022-12-09 14:57:40)

Offline

#17 2022-12-09 14:46:49

seth
Member
Registered: 2012-09-03
Posts: 52,199

Re: I can't record my voice

Stop pulseaudio, run alsamixer to activate and ramp up the mic and both mic boosters (F4 to control the input devices)
Then run 

arecord -f cd > test.wav

, yell into your microphone, ctrl+c to stop the recording and "mpv test.wav" to see whether it has sound.

We need to take PA and skype out of the equation.
One, because it's the primary way to break your audio and the other because we don't know what it does to the mic settings.

And fix post #5.

Edit: grrr as well tongue

Last edited by seth (2022-12-09 14:47:32)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#18 2022-12-09 15:10:47

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

pactl set-source-volume alsa_input.pci-0000_00_1b.0.analog-stereo 100% 0
Inconsistent volume specification.
arecord -Dhw:0 test.wav
Warning: Some sources (like microphones) may produce inaudible results
         with 8-bit sampling. Use '-f' argument to increase resolution
         e.g. '-f S16_LE'.
Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
arecord: set_params:1352: Sample format non available
Available formats:
- S16_LE
- S32_LE
arecord -f cd > test.wav # Still have system sound
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo

Last edited by visious5d (2022-12-09 16:32:52)

Offline

#19 2022-12-09 15:16:13

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,610
Website

Re: I can't record my voice

Not only have you ignored numerous requests to fix post five, but you continue to use code tags without actually putting them around the code.  What's the limitation?  You do realize that code tags can (and should) encompass more than one line, right?

While code tags around commands and their output is best, if given the option of having them only around the command or only around the output, having them around the output would be preferable - but you are doing the opposite.

Last edited by Trilby (2022-12-09 15:17:12)

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#20 2022-12-09 15:23:29

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

@Trilby I don't know how to include all the terminal output in codetags. Read the post #10 and #12. My problem is to record my voice and not the codetags.

Last edited by visious5d (2022-12-09 15:27:16)

Offline

#21 2022-12-09 15:31:09

d.ALT
Member
Registered: 2019-05-10
Posts: 920

Re: I can't record my voice

visious5d wrote:

My problem is to record my voice and not the codetags.

LoL... No, you misunderstood Trilby netiquette suggestion! smile

Please, when you write a Post and there's something realted to Terminal Output(s) (eg.: Bash output) use the [ code ] [ / code ] tags without spaces!

<49,17,III,I>    Fama di loro il mondo esser non lassa;
<50,17,III,I>    misericordia e giustizia li sdegna:
<51,17,III,I>    non ragioniam di lor, ma guarda e passa.

Offline

#22 2022-12-09 15:34:14

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,885

Re: I can't record my voice

Does the test.wav you should've gotten contain audio? Did you try speaking while running it? "Worked some months ago" when, which kernel? Test the LTS kernel?

Offline

#23 2022-12-09 15:40:15

visious5d
Member
Registered: 2021-02-23
Posts: 26

Re: I can't record my voice

Stable linux kernel 6.0.10 - Vanilla Linux kernel and modules, with a few patches applied.
Yes the test.wav contained audio, but system audio. Not of my voice.
When I decided to switch to the LTS Kernel, I'll post to you again. Okay?

Last edited by visious5d (2022-12-09 15:48:54)

Offline

#24 2022-12-09 15:46:59

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,885

Re: I can't record my voice

Yes that's now but which kernel did it last work on? Rerun the test.wav experiment but combine the commands 

arecord -Dhw:0 -f cd test.wav

that should bypass pulse and should be using your mic. Also for good measure output of 

sudo fuser -v /dev/snd/*

the entire output in a single code tag combination this time please.

Offline

#25 2022-12-09 15:51:43

seth
Member
Registered: 2012-09-03
Posts: 52,199

Re: I can't record my voice

My problem is to record my voice and not the codetags.

It can easily become.

I'll just point out that as long as I don't activate my mic boost, I can yell all I want, it's not loud enough.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1 2

Board footer

Powered by FluxBB