You are not logged in.

Pages: 1

#1 2022-12-19 17:28:12

LeonN
Member
Registered: 2022-12-19
Posts: 72

[SOLVED] Internal audio working but wireless headphones do not sound

Hello, everyone. I'm a new Arch user and after finishing an installation in my laptop,. I installed Pulseaudio and pavucontrol packages to enable sound. It all worked fine: both my internal sound card and my Logitech G435 headphones and their respective microphone are recognized by pavucontrol. The issue starts when I try to use my headphones. that are wireless, by the way. Pavucontrol shows no errors with the device but I can't hear anything. I tried a solution from a similar topic in this forum that had to be with the Linux Kernel, but it was just an update of an old version. As I said, I'm a new user so I  don't know what output of what command to post. If you need something, I'll add all information you ask for.

Last edited by LeonN (2022-12-19 18:48:56)

Offline

#2 2022-12-19 17:41:31

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,921

Re: [SOLVED] Internal audio working but wireless headphones do not sound

Welcome to the boards

Post 

sudo fuser -v /dev/snd/*
aplay -lL
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

during reproduction of the issue in code tags https://bbs.archlinux.org/help.php#bbcode

Offline

#3 2022-12-19 17:59:37

LeonN
Member
Registered: 2022-12-19
Posts: 72

Re: [SOLVED] Internal audio working but wireless headphones do not sound

The outputs i get for each command are these, in order:

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  leo         675 F.... volumeicon
                     leo        1076 F.... pulseaudio
/dev/snd/controlC1:  leo        1076 F.... pulseaudio
/dev/snd/controlC2:  leo        1076 F.... pulseaudio
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
    HDA Intel PCH, ALC255 Analog
    Default Audio Device
sysdefault:CARD=PCH
    HDA Intel PCH, ALC255 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    Front output / input
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC255 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
default:CARD=Headset
    G435 Wireless Gaming Headset, USB Audio
    Default Audio Device
sysdefault:CARD=Headset
    G435 Wireless Gaming Headset, USB Audio
    Default Audio Device
front:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    Front output / input
surround21:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Headset,DEV=0
    G435 Wireless Gaming Headset, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC255 Analog [ALC255 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Headset [G435 Wireless Gaming Headset], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
3 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xa4000000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "10fa"
		device.string = "1"
		device.description = "HDA NVidia"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "2"
		alsa.card_name = "G435 Wireless Gaming Headset"
		alsa.long_card_name = "Logitech G series G435 Wireless Gaming Headset at usb-0000:00:14.0-1, full spee"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card2"
		udev.id = "usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0acb"
		device.product.name = "G435 Wireless Gaming Headset"
		device.serial = "Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004"
		device.form_factor = "headset"
		device.string = "2"
		device.description = "G435 Wireless Gaming Headset"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-headset-usb"
		device.intended_roles = "phone"
	profiles:
		input:mono-fallback: Mono Input (priority 1, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (priority 6501, available: unknown)
		output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
		output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (priority 5501, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:mono-fallback>
	sinks:
		alsa_output.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00.analog-stereo/#0: G435 Wireless Gaming Headset Analog Stereo
	sources:
		alsa_output.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00.analog-stereo.monitor/#0: Monitor of G435 Wireless Gaming Headset Analog Stereo
		alsa_input.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00.mono-fallback/#1: G435 Wireless Gaming Headset Mono
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
    index: 2
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4414000 irq 145"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#2: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1f.3.analog-stereo/#3: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
2 sink(s) available.
  * index: 0
	name: <alsa_output.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9048
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "G435 Wireless Gaming Headset"
		alsa.long_card_name = "Logitech G series G435 Wireless Gaming Headset at usb-0000:00:14.0-1, full spee"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card2"
		udev.id = "usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0acb"
		device.product.name = "G435 Wireless Gaming Headset"
		device.serial = "Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004"
		device.form_factor = "headset"
		device.string = "front:2"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "G435 Wireless Gaming Headset Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-headset-usb"
		device.intended_roles = "phone"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>
    index: 1
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9039
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 2
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 2 <alsa_card.pci-0000_00_1f.3>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC255 Analog"
		alsa.id = "ALC255 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4414000 irq 145"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
0 sink input(s) available.

Offline

#4 2022-12-19 18:17:37

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,921

Re: [SOLVED] Internal audio working but wireless headphones do not sound

You aren't trying to play back anything here, setup wise everything looks fine, play something, repost the last two. Make sure the headset isn't HW muted with a button or so.

Maybe also throw in 

sudo dmesg | grep usb

Offline

#5 2022-12-19 18:29:06

LeonN
Member
Registered: 2022-12-19
Posts: 72

Re: [SOLVED] Internal audio working but wireless headphones do not sound

Now I'm playing a video on firefox.
Output for 

pacmd list-sinks

:

2 sink(s) available.
  * index: 0
	name: <alsa_output.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9048
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 53.51 ms
	max request: 7 KiB
	max rewind: 7 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 3
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "G435 Wireless Gaming Headset"
		alsa.long_card_name = "Logitech G series G435 Wireless Gaming Headset at usb-0000:00:14.0-1, full spee"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card2"
		udev.id = "usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0acb"
		device.product.name = "G435 Wireless Gaming Headset"
		device.serial = "Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004"
		device.form_factor = "headset"
		device.string = "front:2"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "G435 Wireless Gaming Headset Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-headset-usb"
		device.intended_roles = "phone"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>
    index: 1
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 40.33 ms
	max request: 6 KiB
	max rewind: 6 KiB
	monitor source: 2
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 2 <alsa_card.pci-0000_00_1f.3>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC255 Analog"
		alsa.id = "ALC255 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4414000 irq 145"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

Output for 

pacmd list-sink-inputs

:

1 sink input(s) available.
    index: 46
	driver: <protocol-native.c>
	flags: START_CORKED
	state: RUNNING
	sink: 0 <alsa_output.usb-Logitech_G_series_G435_Wireless_Gaming_Headset_202105190004-00.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 117.00 ms
	requested latency: 75.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 10
	client: 8 <Firefox>
	properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "18998"
		application.process.user = "leo"
		application.process.host = "Leo-Laptop"
		application.process.binary = "firefox"
		application.language = "C.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "836983444cbf4e54ae769886df578295"
		application.process.session_id = "2"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Output for 

sudo dmesg | grep usb

:

[    0.253263] usbcore: registered new interface driver usbfs
[    0.253263] usbcore: registered new interface driver hub
[    0.253263] usbcore: registered new device driver usb
[    0.439845] usbcore: registered new interface driver usbserial_generic
[    0.439849] usbserial: USB Serial support registered for generic
[    1.011292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    1.011295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.011297] usb usb1: Product: xHCI Host Controller
[    1.011298] usb usb1: Manufacturer: Linux 6.0.12-arch1-1 xhci-hcd
[    1.011299] usb usb1: SerialNumber: 0000:00:14.0
[    1.012520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[    1.012523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.012525] usb usb2: Product: xHCI Host Controller
[    1.012526] usb usb2: Manufacturer: Linux 6.0.12-arch1-1 xhci-hcd
[    1.012527] usb usb2: SerialNumber: 0000:00:14.0
[    1.012898] usb: port power management may be unreliable
[    1.263168] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.442049] usb 1-1: New USB device found, idVendor=046d, idProduct=0acb, bcdDevice= 0.06
[    1.442061] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.442066] usb 1-1: Product: G435 Wireless Gaming Headset
[    1.442069] usb 1-1: Manufacturer: Logitech G series
[    1.442072] usb 1-1: SerialNumber: 202105190004
[    1.463803] input: Logitech G series G435 Wireless Gaming Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:046D:0ACB.0001/input/input5
[    1.520162] input: Logitech G series G435 Wireless Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:046D:0ACB.0001/input/input6
[    1.520381] input: Logitech G series G435 Wireless Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:046D:0ACB.0001/input/input7
[    1.520585] input: Logitech G series G435 Wireless Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:046D:0ACB.0001/input/input8
[    1.521009] hid-generic 0003:046D:0ACB.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Logitech G series G435 Wireless Gaming Headset] on usb-0000:00:14.0-1/input3
[    1.521086] usbcore: registered new interface driver usbhid
[    1.521089] usbhid: USB HID core driver
[    1.569926] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.712349] usb 1-3: New USB device found, idVendor=046d, idProduct=c092, bcdDevice=52.00
[    1.712360] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.712364] usb 1-3: Product: G203 LIGHTSYNC Gaming Mouse
[    1.712367] usb 1-3: Manufacturer: Logitech
[    1.712370] usb 1-3: SerialNumber: 206E31705342
[    1.715369] input: Logitech G203 LIGHTSYNC Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C092.0002/input/input9
[    1.715704] hid-generic 0003:046D:C092.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech G203 LIGHTSYNC Gaming Mouse] on usb-0000:00:14.0-3/input0
[    1.717355] input: Logitech G203 LIGHTSYNC Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C092.0003/input/input10
[    1.773903] hid-generic 0003:046D:C092.0003: input,hiddev97,hidraw2: USB HID v1.11 Keyboard [Logitech G203 LIGHTSYNC Gaming Mouse] on usb-0000:00:14.0-3/input1
[    1.896606] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    2.037301] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[    2.037312] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.037317] usb 1-4: Product: USB2.0 HUB
[    2.159951] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[    2.317279] usb 1-5: New USB device found, idVendor=04f2, idProduct=b64f, bcdDevice=96.49
[    2.317291] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.317295] usb 1-5: Product: HD User Facing
[    2.317299] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.317302] usb 1-5: SerialNumber: 0001
[    2.476613] usb 1-4.3: new full-speed USB device number 6 using xhci_hcd
[    2.789876] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[    2.931917] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    2.931927] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.122550] usbcore: registered new interface driver btusb
[    4.323870] usb 1-5: Found UVC 1.00 device HD User Facing (04f2:b64f)
[    4.338854] input: HD User Facing: HD User Facing as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input21
[    4.338948] usbcore: registered new interface driver uvcvideo
[    4.678989] usbcore: registered new interface driver snd-usb-audio
[    7.809440] usb 1-4.3: config index 0 descriptor too short (expected 59, got 8)
[    7.809445] usb 1-4.3: invalid descriptor for config index 0: type = 0x2, length = 9
[    7.809447] usb 1-4.3: can't read configurations, error -22
[    7.979865] usb 1-4.3: new full-speed USB device number 8 using xhci_hcd
[    8.178399] usb 1-4.3: New USB device found, idVendor=258a, idProduct=0090, bcdDevice=10.14
[    8.178411] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.178415] usb 1-4.3: Product: Mechanical Keyboard
[    8.178418] usb 1-4.3: Manufacturer: SINO WEALTH
[    8.185660] input: SINO WEALTH Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:258A:0090.0005/input/input30
[    8.240366] hid-generic 0003:258A:0090.0005: input,hidraw4: USB HID v1.11 Keyboard [SINO WEALTH Mechanical Keyboard] on usb-0000:00:14.0-4.3/input0
[    8.249033] input: SINO WEALTH Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:258A:0090.0006/input/input31
[    8.306985] hid-generic 0003:258A:0090.0006: input,hiddev98,hidraw5: USB HID v1.11 Keyboard [SINO WEALTH Mechanical Keyboard] on usb-0000:00:14.0-4.3/input1

Offline

#6 2022-12-19 18:37:24

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,921

Re: [SOLVED] Internal audio working but wireless headphones do not sound

 port power management may be unreliable

doesn't read good, try a different USB port best one that is not occupied by other devices, maybe also post 

lsusb -t #Needs the usbutils package

Offline

#7 2022-12-19 18:44:58

LeonN
Member
Registered: 2022-12-19
Posts: 72

Re: [SOLVED] Internal audio working but wireless headphones do not sound

It worked changing the usb port. Thanks for your help. I'll close the issue.

Offline

#8 2022-12-19 18:49:06

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,921

Re: [SOLVED] Internal audio working but wireless headphones do not sound

You can mark as [SOLVED] by editing the title in your first post, you might have to shorten it a little/limit yourself to the wireless headphones not working part.

Edit: Ah you got that, nice.

Last edited by V1del (2022-12-19 18:49:43)

Offline

Pages: 1

Board footer

Powered by FluxBB