You are not logged in.
arch linux, why doesn't pipewire work with the i5 11400, 730 HDMI Audio? If you could set up a test procedure for my hardware that would be great?
Heres my info
aplay -l
card 1: PCH [HDA Intel PCH], device 0: ALC897 Analog [ALC897 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC897 Digital [ALC897 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [Sceptre N43]
Subdevices: 0/1
Subdevice #0: subdevice #0
works
speaker-test -Dhw:1,0 -c2
speaker-test -Dhw:1,1 -c2
Playback device is hw:1,1
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
^CTime per period = 9.061709
[vic@500gbSSD ~]$ speaker-test -Dhw:1,0 -c2
speaker-test 1.2.8
Playback device is hw:1,0
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
^C 1 - Front Right
Time per period = 1.785710
Not working
speaker-test -Dhw:1,3 -c2
[vic@500gbSSD ~]$ speaker-test -Dhw:1,3 -c2
speaker-test 1.2.8
Playback device is hw:1,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy
Why is device is hw:1,3 busy... I dont understand? Why no audio from this port... its listed as functional... I need an exact answer and test procedures... using Archlinux with kde. * Asus 560, I5-11400 with graphics, 730, 32gb ddr4" Windows 11 works great at 4k 60hz, I really want to get this working out of the box no issues..." THIS SAME CONFIGUration works fine with the Dell Optiplex 3050, I5-6500 530, 16gb ddr4, 4k @30hz, installed on 500gb ssd usb, just went over and plugged in drive usb 3 and reboot uefi to boot off ssd)
Thanks Vic
Last edited by VicA (2023-01-17 19:08:51)
Offline
Busy because you are already - trying - to use it with pipewire presumably. Kill everything using the device
systemctl --user mask pipewire{,-pulse} wireplumber --now
speaker-test -Dhw:1,3 -c2
if it doesn't work even now then you have a kernel issue and need to test a different kernel.
Please use https://bbs.archlinux.org/help.php#bbcode code tags for outputs
Last edited by V1del (2023-01-17 19:46:45)
Offline
That works thank you, now I want to test pipewire, I dont understand any of the pipewire commands if there are any.... I ran qpwgrah and the connections are there in case of brave/youtube and vlc for just music mp3. no HDMI audio going there. I disconnected the AudioBox usb but my usb mike is working fine. All the connections in qpwgragh make sense. The output to the line out works fine and my headphone jack on the computer., The hdmi pipewire is not working. I am testing alsa and pulse and that is working,,, now how can I test pipewire? Also if the connections are there in qpwgraph why no audio output? Could it be the sampling rate causes the issue of no sound HDMI, I dont understand I tested the arch usb 500gb SSD with a dell 3050 HDMI audio works everything works... so this studio computer has the issue.. its confusing to me. Any suggestions?
Offline
It seems that pulseaudio uses a default sample rate of 44.1 kHz in daemon.conf, while pipewire uses 48.1 kHz in pipewire.conf. I run plain alsa but I'm interested in this issue, so I looked up these default settings. If this is true, then the rate for pipewire can be changed either in the config file (permanent) or (temporarily) using:
pw-metadata -n settings 0 clock.force-rate 44100
Source: https://gitlab.freedesktop.org/pipewire … e-settings
Last edited by topcat01 (2023-01-18 01:59:52)
Offline
Can you in addition post, while pipewire is active and sound "isn't" working
sudo fuser -v /dev/snd/*
aplay -lL
pactl list cards
pactl list sinks
pactl list sink-inputs
wrapped in [ code] [ /code] tags without the spaces.
Offline
[vic@ssd500gbA ~]$ sudo fuser -v /dev/snd/*
[sudo] password for vic:
USER PID ACCESS COMMAND
/dev/snd/controlC0: vic 1172 F.... kded5
vic 1468 F.... kmix
vic 4560 F.... pipewire
vic 4562 F.... wireplumber
/dev/snd/controlC1: vic 1172 F.... kded5
vic 1468 F.... kmix
vic 4562 F.... wireplumber
/dev/snd/pcmC0D3p: vic 4560 F...m pipewire
/dev/snd/pcmC1D0c: vic 4560 F...m pipewire
/dev/snd/seq: vic 2095 F.... qpwgraph
vic 4560 F.... pipewire
[vic@ssd500gbA ~]$
Offline
[vic@ssd500gbA ~]$ aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=PCH
HDA Intel PCH, ALC897 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
Front output / input
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC897 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, Sceptre N43
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
hdmi:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 3
HDMI Audio Output
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
usbstream:CARD=USB200
NEEWER USB-200
USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC897 Analog [ALC897 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC897 Digital [ALC897 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [Sceptre N43]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[vic@ssd500gbA ~]$
Offline
[vic@ssd500gbA ~]$ pactl list cards
Card #40
Name: alsa_card.usb-C-Media_Electronics_Inc._NEEWER_USB-200-00
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "C-Media Electronics Inc. NEEWER USB-200 at usb-0000:00:14.0-10.2.4.1, high spee"
api.alsa.card.name = "NEEWER USB-200"
api.alsa.path = "hw:1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.api = "alsa"
device.bus = "usb"
device.bus-id = "usb-C-Media_Electronics_Inc._NEEWER_USB-200-00"
device.bus_path = "pci-0000:00:14.0-usb-0:10.2.4.1:1.0"
device.description = "NEEWER USB-200"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-usb"
device.name = "alsa_card.usb-C-Media_Electronics_Inc._NEEWER_USB-200-00"
device.nick = "NEEWER USB-200"
device.plugged.usec = "9541692"
device.product.id = "0x0171"
device.product.name = "NEEWER USB-200"
device.serial = "C-Media_Electronics_Inc._NEEWER_USB-200"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2.4/1-10.2.4.1/1-10.2.4.1:1.0/sound/card1"
device.vendor.id = "0x0d8c"
device.vendor.name = "C-Media Electronics, Inc."
media.class = "Audio/Device"
factory.id = "14"
client.id = "33"
object.id = "39"
object.serial = "40"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "NEEWER USB-200"
alsa.long_card_name = "C-Media Electronics Inc. NEEWER USB-200 at usb-0000:00:14.0-10.2.4.1, high spee"
alsa.driver_name = "snd_usb_audio"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
port.type = "mic"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "1"
Part of profile(s): input:iec958-stereo
Card #41
Name: alsa_card.pci-0000_00_1f.3
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA Intel PCH at 0x6001110000 irq 152"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "hw:0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "7074935"
device.product.id = "0x43c8"
device.product.name = "Tiger Lake-H HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
media.class = "Audio/Device"
factory.id = "14"
client.id = "33"
object.id = "40"
object.serial = "41"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0x6001110000 irq 152"
alsa.driver_name = "snd_hda_intel"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 6, sources: 2, priority: 1, available: yes)
Active Profile: output:hdmi-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
card.profile.port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
card.profile.port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "5"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 6, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 6"
device.icon_name = "video-display"
card.profile.port = "6"
device.product.name = "Sceptre N43"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 7, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 7"
device.icon_name = "video-display"
card.profile.port = "7"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 8, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 8"
device.icon_name = "video-display"
card.profile.port = "8"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 9, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 9"
device.icon_name = "video-display"
card.profile.port = "9"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3, output:hdmi-surround71-extra3+input:analog-stereo
[vic@ssd500gbA ~]$
Offline
c@ssd500gbA ~]$ pactl list sinks
Sink #43
State: RUNNING
Name: alsa_output.pci-0000_00_1f.3.hdmi-stereo
Description: Built-in Audio Digital Stereo (HDMI)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26214 / 40% / -23.88 dB, front-right: 26214 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA Intel PCH at 0x6001110000 irq 152"
alsa.name = "Sceptre N43"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel PCH at 0x6001110000 irq 152"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "hdmi:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "12"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Digital Stereo (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio"
node.name = "alsa_output.pci-0000_00_1f.3.hdmi-stereo"
node.nick = "Sceptre N43"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hdmi:0:playback"
priority.driver = "696"
priority.session = "696"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "33"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "42"
object.serial = "43"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "7074935"
device.product.id = "0x43c8"
device.product.name = "Tiger Lake-H HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "0"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 6, available)
Active Port: hdmi-output-0
Formats:
pcm
[vic@ssd500gbA ~]$
Offline
[vic@ssd500gbA ~]$ pactl list sink-inputs
Sink Input #89
Driver: PipeWire
Owner Module: n/a
Client: 88
Sink: 43
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Brave"
application.process.id = "4791"
application.process.user = "vic"
application.process.host = "ssd500gbA"
application.process.binary = "brave"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "6e43c4d3c43f44979cf9f4b385fa19c7"
application.process.session_id = "1"
application.icon_name = "brave-browser"
media.name = "Playback"
node.rate = "1/48000"
node.latency = "1024/48000"
stream.is-live = "true"
node.name = "Brave"
node.autoconnect = "true"
node.want-driver = "true"
media.class = "Stream/Output/Audio"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "6"
clock.quantum-limit = "8192"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
client.id = "81"
object.id = "82"
object.serial = "89"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "16384"
pulse.attr.prebuf = "12296"
pulse.attr.minreq = "4096"
module-stream-restore.id = "sink-input-by-application-name:Brave"
[vic@ssd500gbA ~]$
Offline
pipewire is active and sound "isn't" working
Offline
CPU: 6-core 11th Gen Intel Core i5-11400 (-MT MCP-)
speed/min/max: 1100/800/4400 MHz Kernel: 6.1.7-zen1-1-zen x86_64 Up: 28m
Mem: 4439.6/31611.1 MiB (14.0%) Storage: 1.44 TiB (1.9% used) Procs: 332
Shell: Bash inxi: 3.3.24
System stuff...
Offline
Please use https://bbs.archlinux.org/help.php#bbcode code tags and don't create new posts for every little thing, you can post all of them in one instead of double posting.
From a general pipeline perspective things look correctly. I'd suggest you try whether this might be a wireplumber bug by replacing it with pipewire-media-session (reboot after doing the replacement) and/or checking whether pulseaudio works in place of pipewire.
Offline
Yes new to posting ... sorry If I offended anyone... thanks for your input... I gave you what you asked for and feedback? Thank you Vic
Offline
Okay... I have two computers a Studio computer where I want to test for music production, ... the other a Dell 3050 purely for testing, ie older hardware... all tests worked fine on the Dell with pulseaudiio, pipewire and wireplumber and then pipewire-media-session. I sent the info you suggested/requested. I dont see any issues now more educated with the output I sent. Thanks for that.
I switched over to pipewire-media-session from wireplumber... no change did a total reinstall with 1. arch and 2. arcolinux separate times... first with pulseaudo, HDMI audio worked fine, then pipewire with pipewire-media-session HDMI audio not working then back to pipewire and wireplumber no HDMI Audio. I did this test 3 separate times with XCFE then plasma X11 and then wayland ...from install, Aroolinus is more flexable with the install different gui options. Archlinux made me learn command line stuff that was cool. Also tested with different kernals all new Zen, Lts and standard and older variations. That's my investigation.... Now I found on git some other testing tools... easyeffects I can change pipewire sample rates, this is of interest... I like this tool also PipeControl.. I will change to the pipewire Git stuff soon.. just trying to understand how the signal path works... if there is a problem with the sessions manager then it makes sense to go that direction, to fix it i dunno, thank you for the info and path... Vic
Offline
Double checking hardware... I connected to all 4 HDMI ports, on reboot, on the Sceptre, same issue...tested the monitor on the Dell every port works with pipewire. Took the arch ssd and connected to Asus amd compter all works.
Is this a Kernel issue? Sounds like kernel issue.... who do I contact about this issue?
Offline
It is not a kernel issue if pulseaudio and speaker-test without pulseaudio/pipewire work fine. Unless the issue only really happens after a while or so, have you tried running pulseaudio for a while to check whether it's really just up to pipewire? If it's a pipewire issue you should make a report on the pipewire bugtracker, do you see any errors in dmesg related to the hdmi output? e.g.
sudo dmesg | grep -iE 'snd|hdmi'
Also as mentioned if no one but you has posted, please edit your previous posts instead of making a new one.
Offline
Can you delete those posts thanks
Offline
Its a kernel issue just found out. https://bugzilla.kernel.org/buglist.cgi … h=i5-11400
Offline
And which of those kernel bugs is related to your problem, you think?
Your BIOS' broken random ACPI fields or the inaccessible thermal sensor of your wireless chip before you bring the NIC up?
Fix your goddamn posts and disable windows fast-start as I already told you in your pointless other thread.
Then V1del and I *might* take another look at your situation.
As long as you don't intend to be cooperative, nobody can help you. With any of your issues.
Offline
I put in a Nvidia card and HDMI audio is working fine now... I consider this closed
Offline