You are not logged in.
- Topics: Active | Unanswered
#1 2023-01-24 02:07:35
- asi14
- Member
- Registered: 2020-10-09
- Posts: 11
Audio Only Plays Through Speakers when Headphones Plugged In
Hello,
I'm currently being burned by an audio problem where whenever I have my headphones plugged into my desktop, the audio plays through the speakers instead. Both the speakers and my headphones are plugged into 3.5mm aux ports so my guess is that either Pulseaudio or Arch Linux is getting confused to which is which. Here is what I've attempted/noticed so far:
1. Several past audio-related posts were resolved by setting the Auto-Mute option to be disabled, so I checked pavucontrol but unfortunately noticed that that option was not listed.
2. Other posts also suggested that I adjust the settings for my aux ports using hdajackretask, but the appropriate soundcard was not detected.
3. On Windows the sound card is named under Realtek but on Arch it's just called "USB Audio" which might suggest maybe driver problems?
Here is the output of fuser and pacmd if it helps. The card I think is being used is Card #4 -- Card 1 pertains to my graphics card, Card 2 pertains to my microphone, and Card 3 pertains to a KVM Switch I have plugged into the computer. I found this entry on the Arch Linux wiki which seemed remotely useful to this problem, but I'm not 100% sure. Any tips on what I should check next?
$ sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC1: brianl 1085 F.... pulseaudio
/dev/snd/controlC2: brianl 1085 F.... pulseaudio
/dev/snd/controlC3: brianl 1085 F.... pulseaudio
/dev/snd/controlC4: brianl 1085 F.... pulseaudio
/dev/snd/pcmC4D0p: brianl 1085 F...m pulseaudio$ pacmd list-cards
4 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xa1080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "1aef"
device.product.name = "GA102 High Definition Audio Controller"
device.string = "1"
device.description = "GA102 High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.usb-VIA_Technologies_Inc._USB_Audio_Device-00>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "3"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "VIA Technologies Inc. USB Audio Device at usb-0000:00:14.0-11.1.4, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:11.1.4:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1.4/1-11.1.4:1.0/sound/card3"
udev.id = "usb-VIA_Technologies_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "040d"
device.vendor.name = "VIA Technologies, Inc."
device.product.id = "340b"
device.product.name = "USB Audio Device"
device.serial = "VIA_Technologies_Inc._USB_Audio_Device"
device.string = "3"
device.description = "USB Audio Device"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
input:iec958-stereo: Digital Stereo (IEC958) Input (priority 55, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (priority 300, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo>
sinks:
alsa_output.usb-VIA_Technologies_Inc._USB_Audio_Device-00.analog-stereo/#0: USB Audio Device Analog Stereo
sources:
alsa_output.usb-VIA_Technologies_Inc._USB_Audio_Device-00.analog-stereo.monitor/#0: Monitor of USB Audio Device Analog Stereo
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
iec958-stereo-input: Digital Input (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
index: 2
name: <alsa_card.usb-Generic_USB_Audio-00>
driver: <module-alsa-card.c>
owner module: 8
properties:
alsa.card = "4"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-14, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:14:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/sound/card4"
udev.id = "usb-Generic_USB_Audio-00"
device.bus = "usb"
device.vendor.id = "0b05"
device.vendor.name = "ASUSTek Computer, Inc."
device.product.id = "1999"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.string = "4"
device.description = "USB Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
profiles:
input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
input:iec958-stereo: Digital Stereo (IEC958) Input (priority 32823, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (priority 39323, available: unknown)
output:analog-surround-21: Analog Surround 2.1 Output (priority 34068, available: unknown)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-21+input:iec958-stereo: Analog Surround 2.1 Output + Digital Stereo (IEC958) Input (priority 34123, available: unknown)
output:analog-surround-40: Analog Surround 4.0 Output (priority 33968, available: unknown)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0 Output + Digital Stereo (IEC958) Input (priority 34023, available: unknown)
output:analog-surround-41: Analog Surround 4.1 Output (priority 34068, available: unknown)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-41+input:iec958-stereo: Analog Surround 4.1 Output + Digital Stereo (IEC958) Input (priority 34123, available: unknown)
output:analog-surround-50: Analog Surround 5.0 Output (priority 33968, available: unknown)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-50+input:iec958-stereo: Analog Surround 5.0 Output + Digital Stereo (IEC958) Input (priority 34023, available: unknown)
output:analog-surround-51: Analog Surround 5.1 Output (priority 34068, available: unknown)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1 Output + Digital Stereo (IEC958) Input (priority 34123, available: unknown)
output:analog-surround-71: Analog Surround 7.1 Output (priority 33968, available: unknown)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-71+input:iec958-stereo: Analog Surround 7.1 Output + Digital Stereo (IEC958) Input (priority 34023, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 38268, available: unknown)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 38333, available: unknown)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 38323, available: unknown)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (priority 300, available: unknown)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (priority 33133, available: unknown)
output:iec958-ac3-surround-51+input:iec958-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Digital Stereo (IEC958) Input (priority 33123, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.usb-Generic_USB_Audio-00.analog-stereo/#1: USB Audio Analog Stereo
sources:
alsa_output.usb-Generic_USB_Audio-00.analog-stereo.monitor/#1: Monitor of USB Audio Analog Stereo
alsa_input.usb-Generic_USB_Audio-00.analog-stereo/#2: USB Audio Analog Stereo
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
iec958-stereo-input: Digital Input (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
index: 3
name: <alsa_card.usb-BLUE_MICROPHONE_Blue_Snowball_SUGA_2021_03_12_31783-00>
driver: <module-alsa-card.c>
owner module: 9
properties:
alsa.card = "2"
alsa.card_name = "Blue Snowball"
alsa.long_card_name = "BLUE MICROPHONE Blue Snowball at usb-0000:00:14.0-8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/sound/card2"
udev.id = "usb-BLUE_MICROPHONE_Blue_Snowball_SUGA_2021_03_12_31783-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0005"
device.product.name = "Blue Snowball"
device.serial = "BLUE_MICROPHONE_Blue_Snowball_SUGA_2021_03_12_31783"
device.string = "2"
device.description = "Blue Snowball"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
profiles:
input:mono-fallback: Mono Input (priority 1, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <input:mono-fallback>
sources:
alsa_input.usb-BLUE_MICROPHONE_Blue_Snowball_SUGA_2021_03_12_31783-00.mono-fallback/#3: Blue Snowball Mono
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"$ pacmd list-sinks
2 sink(s) available.
index: 0
name: <alsa_output.usb-VIA_Technologies_Inc._USB_Audio_Device-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: front-left: 58327 / 89% / -3.04 dB, front-right: 58327 / 89% / -3.04 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.usb-VIA_Technologies_Inc._USB_Audio_Device-00>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "VIA Technologies Inc. USB Audio Device at usb-0000:00:14.0-11.1.4, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:11.1.4:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1.4/1-11.1.4:1.0/sound/card3"
udev.id = "usb-VIA_Technologies_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "040d"
device.vendor.name = "VIA Technologies, Inc."
device.product.id = "340b"
device.product.name = "USB Audio Device"
device.serial = "VIA_Technologies_Inc._USB_Audio_Device"
device.string = "front:3"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "USB Audio Device Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
* index: 1
name: <alsa_output.usb-Generic_USB_Audio-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9049
volume: front-left: 55142 / 84% / -4.50 dB, front-right: 55142 / 84% / -4.50 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 71.77 ms
max request: 15 KiB
max rewind: 15 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 90.00 ms; range is 0.50 .. 2000.00 ms
card: 2 <alsa_card.usb-Generic_USB_Audio-00>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "4"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-14, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:14:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/sound/card4"
udev.id = "usb-Generic_USB_Audio-00"
device.bus = "usb"
device.vendor.id = "0b05"
device.vendor.name = "ASUSTek Computer, Inc."
device.product.id = "1999"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.string = "front:4"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "USB Audio Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>$ pacmd list-sink-inputs
1 sink input(s) available.
index: 298
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
sink: 1 <alsa_output.usb-Generic_USB_Audio-00.analog-stereo>
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 110.00 ms
requested latency: 90.00 ms
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: (null)
module: 11
client: 57 <Strawberry>
properties:
media.name = "'深紅の架け橋' by '柚木梨沙'"
application.name = "Strawberry"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.icon_name = "strawberry"
media.role = "music"
application.process.id = "4260"
application.process.user = "brianl"
application.process.host = "myhostname"
application.process.binary = "strawberry"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8166e44d1752439586c60b548035cf4c"
application.process.session_id = "2"
module-stream-restore.id = "sink-input-by-media-role:music"
media.title = "深紅の架け橋"
media.artist = "柚木梨沙"Offline
#2 2023-01-24 06:29:49
- mneiner
- Member
- Registered: 2017-12-13
- Posts: 21
Re: Audio Only Plays Through Speakers when Headphones Plugged In
Have a similar problem. Before I installed Pulse and Bluetooth support, I could listen to my laptops speakers or plug in a speaker at the laptop audio port. This was just with ALSA
Once I installed Pulse and Bluetooth support, the laptop audio port stopped working. I tried all the Mute/Unmute gyrations, no Joy....
I got into the path config files at usr/share and started tinkering with those to no avail.
Funny thing is, while watching PulseAudio Vol Control, I can watch my headphones plug in and things switch over to the path and there is clearly audio at PAVControl, but no way to route it to the speaker.....
Since I have Bluetooth working, the problem is sort of on the backburner, but your post caught my interest.
_________________________
Asus X200CA Notebook
Offline
#3 2023-01-24 08:50:36
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,255
Re: Audio Only Plays Through Speakers when Headphones Plugged In
"Manually" switching the selected port as necessary doesn't help? E.g.
pacmd set-sink-port alsa_output.usb-Generic_USB_Audio-00.analog-stereo analog-output-speakeror switching the appropriate setting in the "Devices" Tab of pavucontrol?
FWIW for getting at potential Auto-Mute controls the peculiarity with them is that you wouldn't get to them via pavucontrol since they are a "side" control you'll only see if you look at the HW directly, so what do you get for
amixer -c4 #alsa-utilsOffline
#4 2023-01-25 03:22:20
- asi14
- Member
- Registered: 2020-10-09
- Posts: 11
Re: Audio Only Plays Through Speakers when Headphones Plugged In
V1del wrote:
"Manually" switching the selected port as necessary doesn't help? E.g.
pacmd set-sink-port alsa_output.usb-Generic_USB_Audio-00.analog-stereo analog-output-speakeror switching the appropriate setting in the "Devices" Tab of pavucontrol?
FWIW for getting at potential Auto-Mute controls the peculiarity with them is that you wouldn't get to them via pavucontrol since they are a "side" control you'll only see if you look at the HW directly, so what do you get for
amixer -c4 #alsa-utils
I tried the first command (and setting the device in pavucontrol) to no avail. Here's the output for the second command:
$ amixer -c4 #alsa-utils
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right - Rear Left - Rear Right - Front Center - Woofer - Side Left - Side Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 86 [99%] [-0.75dB] [on]
Front Right: Playback 86 [99%] [-0.75dB] [on]
Rear Left: Playback 86 [99%] [-0.75dB] [on]
Rear Right: Playback 86 [99%] [-0.75dB] [on]
Front Center: Playback 86 [99%] [-0.75dB] [on]
Woofer: Playback 86 [99%] [-0.75dB] [on]
Side Left: Playback 86 [99%] [-0.75dB] [on]
Side Right: Playback 86 [99%] [-0.75dB] [on]
Simple mixer control 'PCM',1
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 60 [69%] [-20.25dB] [on]
Front Right: Playback 60 [69%] [-20.25dB] [on]
Simple mixer control 'PCM',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Line',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 39
Front Left: Capture 0 [0%] [-17.25dB] [off]
Front Right: Capture 0 [0%] [-17.25dB] [off]
Simple mixer control 'Mic',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 39
Front Left: Capture 0 [0%] [-17.25dB] [off]
Front Right: Capture 0 [0%] [-17.25dB] [off]
Simple mixer control 'Analog In',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 39
Front Left: Capture 23 [59%] [0.00dB] [on]
Front Right: Capture 23 [59%] [0.00dB] [on]
Simple mixer control 'Headset',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 39
Front Left: Capture 0 [0%] [-17.25dB] [on]
Front Right: Capture 0 [0%] [-17.25dB] [on]Offline
#5 2023-02-19 01:31:27
- asi14
- Member
- Registered: 2020-10-09
- Posts: 11
Re: Audio Only Plays Through Speakers when Headphones Plugged In
Hey, any chance I could get an update on what I could try next?
Offline