You are not logged in.

Pages: 1

#1 2023-02-01 17:38:14

gomi
Member
Registered: 2023-02-01
Posts: 27

[SOLVED] No sounds since configuring new PC

Built a new PC in December and got it all working (eventually) except sounds. Now running Arch 6.1.8-arch1-1. Tried a whole variety of commands to try to interpret what's going wrong, following a bundle of "SOLVED" threads on this forum and elsewhere. No luck whatsoever.

So, to start off keeping it simple, here is the output of, first, 

 ~]$ pulseaudio -v
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 16.1
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is b1a2787386b6464b89f1c5559952ed77.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/gomi/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulseaudio/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: System supports high resolution timers
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
E: [pulseaudio] main.c: Unknown command: changequote(`[', `]')dnl Set up m4 quoting
E: [pulseaudio] main.c: Failed to initialize daemon due to errors while executing startup commands. Source of commands: /etc/pulse/default.pa

then the content of the nominally offending file:

 ~]$ cat /etc/pulse/default.pa
#!@PA_BINARY@ -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
changequote(`[', `]')dnl Set up m4 quoting

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
ifelse(@HAVE_ALSA@, 1, [dnl
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
])dnl
ifelse(@HAVE_OSS_OUTPUT@, 1, [dnl
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
])dnl
ifelse(@HAVE_WAVEOUT@, 1, [dnl
load-module module-waveout sink_name=output source_name=input
])dnl
#load-module module-null-sink
ifelse(@HAVE_MKFIFO@, 1, [dnl
#load-module module-pipe-sink
])dnl

### Automatically load driver modules depending on the hardware available
ifelse(@HAVE_UDEV@, 1, [dnl
.ifexists module-udev-detect@PA_SOEXT@
load-module module-udev-detect
.else
], @HAVE_COREAUDIO@, 1, [dnl
.ifexists module-coreaudio-detect@PA_SOEXT@
load-module module-coreaudio-detect
.else
], [dnl
.ifexists module-detect@PA_SOEXT@
])dnl
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
ifelse(@OS_IS_FREEBSD@, 1, [dnl
### FreeBSD devd is used in addition to static detection (only handles hotplug)
.ifexists module-devd-detect@PA_SOEXT@
load-module module-devd-detect
.endif
])dnl

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect@PA_SOEXT@
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

ifelse(@HAVE_BLUEZ@, 1, [dnl
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy@PA_SOEXT@
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover@PA_SOEXT@
load-module module-bluetooth-discover
.endif
])dnl

ifelse(@HAVE_AF_UNIX@, 1, [dnl
### Load several protocols
.ifexists module-esound-protocol-unix@PA_SOEXT@
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
])dnl

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
ifelse(@HAVE_AVAHI@, 1, [dnl
#load-module module-zeroconf-publish
])dnl

ifelse(@OS_IS_WIN32@, 0, [dnl
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

ifelse(@HAVE_GSETTINGS@, 1, [dnl
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings@PA_SOEXT@
.nofail
load-module module-gsettings
.fail
.endif
])dnl

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit@PA_SOEXT@
load-module module-console-kit
.endif
.ifexists module-systemd-login@PA_SOEXT@
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
])dnl

### Make some devices default
#set-default-sink output
#set-default-source input

### Allow including a default.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail

I simply don't know where to go from here. Any pointers please?

Last edited by gomi (2023-02-05 09:05:01)

Offline

#2 2023-02-03 17:26:22

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,626

Re: [SOLVED] No sounds since configuring new PC

That file is completely broken and contains placeholders that would be replaced during compilation where did you get this? Remove it and reinstall the pulseaudio package and reboot. After post 

sudo fuser -v /dev/snd/*
sudo dmesg | grep -iE 'snd|sof'
aplay -lL
uname -a
pactl list cards
pactl list sinks

Offline

#3 2023-02-03 18:39:48

gomi
Member
Registered: 2023-02-01
Posts: 27

Re: [SOLVED] No sounds since configuring new PC

I think I may have got these a bit mixed up. I'm posting so it doesn't time me out but will checkover and amend to get it right and in the sequence you asked for.

As root:

 ~]# fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  gomi        877 F.... pulseaudio

and 

~]# dmesg | grep -iE 'snd|sof'
[    0.068296] software IO TLB: area num 32.
[    0.345396] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.374495] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.374497] software IO TLB: mapped [mem 0x00000000aff94000-0x00000000b3f94000] (64MB)
[   12.485213] snd_hda_intel 0000:05:00.1: enabling device (0000 -> 0002)
[   12.485268] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[   12.485341] snd_hda_intel 0000:05:00.6: enabling device (0000 -> 0002)
[   12.499887] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[   12.519676] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
[   12.520360] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   12.520363] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.520364] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.520365] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   12.520366] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[   12.520366] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   12.520367] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   12.520368] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   12.520369] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a

As user:

~]$ aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, Q27G2WG4
    HDMI Audio Output
hdmi:CARD=Generic,DEV=1
    HD-Audio Generic, Q27G2WG4
    HDMI Audio Output
hdmi:CARD=Generic,DEV=2
    HD-Audio Generic, HDMI 2
    HDMI Audio Output
hdmi:CARD=Generic,DEV=3
    HD-Audio Generic, HDMI 3
    HDMI Audio Output
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
sysdefault:CARD=Generic_1
    HD-Audio Generic, ALCS1200A Analog
    Default Audio Device
front:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    Front output / input
surround21:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALCS1200A Digital
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Generic_1
    HD-Audio Generic
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [Q27G2WG4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Generic [HD-Audio Generic], device 7: HDMI 1 [Q27G2WG4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Generic [HD-Audio Generic], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Generic [HD-Audio Generic], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic_1 [HD-Audio Generic], device 0: ALCS1200A Analog [ALCS1200A Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic_1 [HD-Audio Generic], device 1: ALCS1200A Digital [ALCS1200A Digital]
  Subdevices: 1/1
~]$ uname -a
Linux mingus 6.1.9-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 01 Feb 2023 17:07:39 +000
 ~]$ pactl list cards
Card #0
	Name: alsa_card.pci-0000_05_00.1
	Driver: module-alsa-card.c
	Owner Module: 6
	Properties:
		alsa.card = "0"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcd88000 irq 64"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.string = "0"
		device.description = "Renoir Radeon High Definition Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 38668, available: yes)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 38468, available: yes)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "Q27G2WG4"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "Q27G2WG4"
			Part of profile(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #1
	Name: alsa_card.pci-0000_05_00.6
	Driver: module-alsa-card.c
	Owner Module: 7
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcd80000 irq 65"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.string = "1"
		device.description = "Family 17h/19h HD Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
		output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
		output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
		output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
		output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
		output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
		output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
		output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
		output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
		output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
		output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 38268, available: yes)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
		output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
		output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:iec958-stereo
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available)
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-headphones"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Part of profile(s): output:iec958-stereo, output:iec958-

Yes, missed list sinks off. Just out of hospital after two surgical procedures (one left to go) and still getting a bit confused. Here it is:

~]$ pactl list sinks
Sink #0
    State: SUSPENDED
    Name: alsa_output.pci-0000_05_00.1.hdmi-stereo
    Description: Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 6
    Mute: no
    Volume: front-left: 49912 /  76% / -7.10 dB,   front-right: 49912 /  76% / -7.10 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_05_00.1.hdmi-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
    Properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "Q27G2WG4"
        alsa.id = "HDMI 0"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "3"
        alsa.card = "0"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfcd88000 irq 64"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:05:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "1637"
        device.product.name = "Renoir Radeon High Definition Audio Controller"
        device.string = "hdmi:0"
        device.buffering.buffer_size = "352768"
        device.buffering.fragment_size = "176384"
        device.access_mode = "mmap+timer"
        device.profile.name = "hdmi-stereo"
        device.profile.description = "Digital Stereo (HDMI)"
        device.description = "Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI)"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    Ports:
        hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
    Active Port: hdmi-output-0
    Formats:
        pcm

Sink #1
    State: SUSPENDED
    Name: alsa_output.pci-0000_05_00.6.iec958-stereo
    Description: Family 17h/19h HD Audio Controller Digital Stereo (IEC958)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 46631 /  71% / -8.87 dB,   front-right: 46631 /  71% / -8.87 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_05_00.6.iec958-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS 
    Properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALCS1200A Digital"
        alsa.id = "ALCS1200A Digital"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "1"
        alsa.card = "1"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfcd80000 irq 65"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:05:00.6"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
        device.bus = "pci"
        device.vendor.id = "1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        device.product.id = "15e3"
        device.product.name = "Family 17h/19h HD Audio Controller"
        device.string = "iec958:1"
        device.buffering.buffer_size = "352768"
        device.buffering.fragment_size = "176384"
        device.access_mode = "mmap+timer"
        device.profile.name = "iec958-stereo"
        device.profile.description = "Digital Stereo (IEC958)"
        device.description = "Family 17h/19h HD Audio Controller Digital Stereo (IEC958)"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    Ports:
        iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
    Active Port: iec958-stereo-output
    Formats:

That has got pavucontrol working and I'm very grateful for that. Still no sounds but obviously progress made.

Last edited by gomi (2023-02-03 18:53:36)

Offline

#4 2023-02-03 18:53:21

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,626

Re: [SOLVED] No sounds since configuring new PC

So now you have devices and cards, what happens if you try to play something? Chances are you want to switch to an analog output from digital

Offline

#5 2023-02-03 18:55:35

gomi
Member
Registered: 2023-02-01
Posts: 27

Re: [SOLVED] No sounds since configuring new PC

Just tried playing audio from an online video, but still no sounds. I'll have a look at pavucontrol and see if that lets me switch to analog. If not, where should I look?

P.S. I only need the simplest of sound systems. Listen whist watching online videos and listen to my CDs, copied onto the hdd in .ogg format. I haven't configured anything to play the CDs yet, so just online for the time  being.

Last edited by gomi (2023-02-03 19:06:47)

Offline

#6 2023-02-03 22:09:47

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,626

Re: [SOLVED] No sounds since configuring new PC

You can switch that in pavucontrol, and while playing back something in the browser or so, make sure they are playing to the correct device. Post 

pactl list sinks
pactl list sink-inputs

during actual playback attempts.

Offline

#7 2023-02-04 12:57:21

gomi
Member
Registered: 2023-02-01
Posts: 27

Re: [SOLVED] No sounds since configuring new PC

~]$ pactl list sinks
Sink #0
	State: RUNNING
	Name: alsa_output.pci-0000_05_00.6.iec958-stereo
	Description: Family 17h/19h HD Audio Controller Digital Stereo (IEC958)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 57502 /  88% / -3.41 dB,   front-right: 57233 /  87% / -3.53 dB
	        balance -0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_05_00.6.iec958-stereo.monitor
	Latency: 75620 usec, configured 75000 usec
	Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALCS1200A Digital"
		alsa.id = "ALCS1200A Digital"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "1"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcd80000 irq 65"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.string = "iec958:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "iec958-stereo"
		device.profile.description = "Digital Stereo (IEC958)"
		device.description = "Family 17h/19h HD Audio Controller Digital Stereo (IEC958)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
	Active Port: iec958-stereo-output
	Formats:
		pcm

Sink #1
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.1.hdmi-stereo-extra1
	Description: Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI 2)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_05_00.1.hdmi-stereo-extra1.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Q27G2WG4"
		alsa.id = "HDMI 1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "7"
		alsa.card = "0"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcd88000 irq 64"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.string = "hdmi:0,1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra1"
		device.profile.description = "Digital Stereo (HDMI 2)"
		device.description = "Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI 2)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, available)
	Active Port: hdmi-output-1
	Formats:
		pcm

and 

[gomi@mingus ~]$ pactl list sink-inputs
Sink Input #0
	Driver: protocol-native.c
	Owner Module: 12
	Client: 8
	Sink: 0
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Buffer Latency: 125000 usec
	Sink Latency: 70547 usec
	Resample method: copy
	Properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "2036"
		application.process.user = "gomi"
		application.process.host = "mingus"
		application.process.binary = "firefox"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "b1a2787386b6464b89f1c5559952ed77"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firef

pavucontrol is not offering an option to switch to analogue. Lots of options but no allowing me to switch between them. There are still no sounds. Looking at these outputs I would have thought there should be so my ignorance is clearly showing.

WOW!!! Just made the one switch pavucontrol would allow, to the "Renoir Radeon" option from the "Family" one. It is very loud indeed!!!

Sincere thanks to you both for your expertise and for your patience, @V1del. Marking the thread "solved" now.

Offline

#8 2023-02-04 13:51:02

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,626

Re: [SOLVED] No sounds since configuring new PC

Well you need to know your speaker setup, if you are going over HDMI to the screen then that's what you should play from indeed, glad to hear this fixed it.

Offline

#9 2023-02-04 20:56:17

gomi
Member
Registered: 2023-02-01
Posts: 27

Re: [SOLVED] No sounds since configuring new PC

It was working. But now it is not. I tried doing as the system suggested, which was to run "start-pulseaudio-x11"

 ~]$ start-pulseaudio-x11

pavucontrol keeps pumping out a failure message:

 ~]$ pavucontrol

(pavucontrol:1943): Gdk-CRITICAL **: 20:26:28.641: gdk_x11_window_get_xid: assertion 'GDK_IS_X11_WINDOW (window)' failed

(pavucontrol:1943): Gdk-CRITICAL **: 20:26:30.848: gdk_x11_window_get_xid: assertion 'GDK_IS_X11_WINDOW (window)' failed

list sinks now says suspended:

~]$ pactl list sinks
Sink #7
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.1.hdmi-stereo
	Description: Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 59114 /  90% / -2.69 dB,   front-right: 55020 /  84% / -4.56 dB
	        balance -0.07
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_05_00.1.hdmi-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Q27G2WG4"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "0"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcd88000 irq 65"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.string = "hdmi:0"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
	Active Port: hdmi-output-0
	Formats:
		ac3-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		eac3-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		mpeg-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		dts-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		mpeg2-aac-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		truehd-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		dtshd-iec61937, format.rate = "[ 32000, 44100, 48000 ]"
		pcm

Sink #8
	State: RUNNING
	Name: alsa_output.pci-0000_05_00.6.iec958-ac3-surround-51
	Description: Family 17h/19h HD Audio Controller Digital Surround 5.1 (IEC958/AC3)
	Driver: module-alsa-card.c
	Sample Specification: s32le 6ch 48000Hz
	Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
	Owner Module: 7
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB,   rear-left: 65536 / 100% / 0.00 dB,   rear-right: 65536 / 100% / 0.00 dB,   front-center: 65536 / 100% / 0.00 dB,   lfe: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_05_00.6.iec958-ac3-surround-51.monitor
	Latency: 0 usec, configured 96000 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "32"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "a52:1"
		alsa.id = "a52:1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "a52:1"
		alsa.device = "0"
		device.string = "plug:SLAVE='a52:1'"
		device.buffering.buffer_size = "110592"
		device.buffering.fragment_size = "18432"
		device.access_mode = "mmap"
		device.profile.name = "iec958-ac3-surround-51"
		device.profile.description = "Digital Surround 5.1 (IEC958/AC3)"
		device.description = "Family 17h/19h HD Audio Controller Digital Surround 5.1 (IEC958/AC3)"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcd80000 irq 66"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:

List sink inputs shows muted:

~]$ pactl list sink-inputs
Sink Input #24
	Driver: protocol-native.c
	Owner Module: 12
	Client: 14
	Sink: 8
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: yes
	Volume: front-left: 44100 /  67% / -10.32 dB,   front-right: 44100 /  67% / -10.32 dB
	        balance 0.00
	Buffer Latency: 122625 usec
	Sink Latency: 0 usec
	Resample method: copy
	Properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "4121"
		application.process.user = "gomi"
		application.process.host = "mingus"
		application.process.binary = "firefox"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "b1a2787386b6464b89f1c5559952ed77"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firef

Is there a way to get back to sounds being on and remaining on, i.e. persistence through switching off and on or rebooting?

TIA

Edit: Got it going again after some fiddling around. Still can't work out how to make it persistent though.

Final edit: Whatever I tweaked last night appears to have done the job. Audio has continued working through a couple of reboots to test and the usual overnight switch-off.

Last edited by gomi (2023-02-05 09:07:10)

Offline

Pages: 1

Board footer

Powered by FluxBB