You are not logged in.

Pages: 1

#1 2023-02-22 13:53:14

StarcClans
Member
Registered: 2023-02-22
Posts: 32

My usb wifi adapter won't work [SOLVED]

My usb wifi adapter: EDUP EP - AC1607 Dual Band 600 Mbp
I installed the required and compatible drivers:
8821au/5.12.5.2.r178.g45366a3, 6.1.12-arch1-1, x86_64: installed
rtl8821CU/5.2.5.3: added
The device is recognized by lsusb and the drivers are recognized by sudo dkms status
My linux version 6.1.12-arch1-1

Last edited by StarcClans (2023-02-22 19:46:59)

Offline

#2 2023-02-22 14:06:32

d.ALT
Member
Registered: 2019-05-10
Posts: 959

Re: My usb wifi adapter won't work [SOLVED]

Remove the adapter.
Go with

# dmesg -Hw

leave it running while re-plugging it.

Also post here

# lsusb

# lsmod

<49,17,III,I>    Fama di loro il mondo esser non lassa;
<50,17,III,I>    misericordia e giustizia li sdegna:
<51,17,III,I>    non ragioniam di lor, ma guarda e passa.

Offline

#3 2023-02-22 15:48:11

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

So I am just confirming I need to unplug the wifi adapter and replug it while running the # dmesg -Hw

Offline

#4 2023-02-22 15:54:16

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

# lsusb:

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 1a2c:2124 China Resource Semico Co., Ltd Keyboard
Bus 005 Device 002: ID 0000:3825   USB OPTICAL MOUSE
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0bda:c811 Realtek Semiconductor Corp. 802.11ac NIC
Bus 001 Device 002: ID 0b05:19af ASUSTek Computer, Inc. AURA LED Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

# lsmod:

Module                  Size  Used by
uinput                 20480  3
cfg80211             1138688  0
ccm                    20480  0
algif_aead             16384  0
cbc                    16384  0
des_generic            16384  0
libdes                 24576  1 des_generic
ecb                    16384  0
algif_skcipher         16384  0
cmac                   16384  0
md4                    16384  0
algif_hash             16384  0
af_alg                 36864  3 algif_hash,algif_skcipher,algif_aead
intel_rapl_msr         20480  0
intel_rapl_common      32768  1 intel_rapl_msr
edac_mce_amd           57344  0
kvm_amd               176128  0
snd_hda_codec_realtek   172032  1
kvm                  1150976  1 kvm_amd
snd_hda_codec_generic    98304  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     86016  2
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  1
snd_hda_intel          61440  8
crc32_pclmul           16384  0
snd_intel_dspcfg       36864  1 snd_hda_intel
polyval_clmulni        16384  0
snd_intel_sdw_acpi     20480  1 snd_intel_dspcfg
polyval_generic        16384  1 polyval_clmulni
gf128mul               16384  1 polyval_generic
snd_hda_codec         188416  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
ghash_clmulni_intel    16384  0
eeepc_wmi              16384  0
sha512_ssse3           53248  0
r8169                  98304  0
asus_wmi               69632  1 eeepc_wmi
aesni_intel           393216  0
snd_hda_core          118784  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
realtek                36864  1
crypto_simd            16384  1 aesni_intel
snd_hwdep              16384  1 snd_hda_codec
ledtrig_audio          16384  2 snd_hda_codec_generic,asus_wmi
mdio_devres            16384  1 r8169
cryptd                 24576  2 crypto_simd,ghash_clmulni_intel
sparse_keymap          16384  1 asus_wmi
mousedev               24576  0
joydev                 28672  0
platform_profile       16384  1 asus_wmi
libphy                172032  3 r8169,mdio_devres,realtek
snd_pcm               172032  5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
rapl                   16384  0
rfkill                 32768  7 asus_wmi,cfg80211
wmi_bmof               16384  0
snd_timer              49152  1 snd_pcm
pcspkr                 16384  0
sp5100_tco             20480  0
snd                   131072  23 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
k10temp                16384  0
soundcore              16384  1 snd
i2c_piix4              36864  0
ccp                   135168  1 kvm_amd
gpio_amdpt             20480  0
gpio_generic           20480  1 gpio_amdpt
acpi_cpufreq           32768  0
mac_hid                16384  0
vboxnetflt             32768  0
vboxnetadp             28672  0
vboxdrv               581632  2 vboxnetadp,vboxnetflt
pkcs8_key_parser       16384  0
dm_multipath           45056  0
crypto_user            24576  0
dm_mod                192512  1 dm_multipath
fuse                  176128  5
loop                   36864  0
bpf_preload            24576  0
ip_tables              36864  0
x_tables               57344  1 ip_tables
ext4                 1032192  2
crc32c_generic         16384  0
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  192512  1 ext4
usbhid                 73728  0
amdgpu              10747904  74
drm_ttm_helper         16384  1 amdgpu
ttm                    94208  2 amdgpu,drm_ttm_helper
video                  65536  2 asus_wmi,amdgpu
nvme                   61440  2
gpu_sched              49152  1 amdgpu
drm_buddy              20480  1 amdgpu
nvme_core             208896  3 nvme
drm_display_helper    212992  1 amdgpu
crc32c_intel           24576  4
nvme_common            24576  1 nvme_core
xhci_pci               24576  0
cec                    81920  1 drm_display_helper
xhci_pci_renesas       24576  1 xhci_pci
wmi                    45056  3 video,asus_wmi,wmi_bmof

Last edited by StarcClans (2023-02-22 16:07:18)

Offline

#5 2023-02-22 15:57:18

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: My usb wifi adapter won't work [SOLVED]

Please use code tags for pasting outputs.

The output you get from dmesg when plugging it in is actually the most interesting here, post that.

Offline

#6 2023-02-22 16:01:27

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xcb000000-0xceffffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xcfffffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[  +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[  +0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[  +0.000001] [mem 0xd0000000-0xefffffff] available for PCI devices
[  +0.000001] Booting paravirtualized kernel on bare hardware
[  +0.000002] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[  +0.003082] setup_percpu: NR_CPUS:320 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[  +0.000619] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[  +0.000005] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[  +0.000001] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[  +0.000005] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[  +0.000020] Fallback order for Node 0: 0 
[  +0.000003] Built 1 zonelists, mobility grouping on.  Total pages: 4075977
[  +0.000001] Policy zone: Normal
[  +0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=068fe733-426d-45a4-a261-081da48eee1e rw loglevel=3 quiet
[  +0.000036] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[  +0.000024] random: crng init done
[  +0.000001] printk: log_buf_len individual max cpu contribution: 4096 bytes
[  +0.000001] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[  +0.000000] printk: log_buf_len min size: 131072 bytes
[  +0.000105] printk: log_buf_len: 262144 bytes
[  +0.000001] printk: early log buf free: 116056(88%)
[  +0.000308] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[  +0.000156] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[  +0.000109] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[  +0.000040] software IO TLB: area num 32.
[  +0.022634] Memory: 16125512K/16563348K available (16391K kernel code, 2160K rwdata, 11076K rodata, 2144K init, 3332K bss, 437576K reserved, 0K cma-reserved)
[  +0.000083] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[  +0.000009] ftrace: allocating 46413 entries in 182 pages
[  +0.007619] ftrace: allocated 182 pages with 5 groups
[  +0.000065] Dynamic Preempt: full
[  +0.000035] rcu: Preemptible hierarchical RCU implementation.
[  +0.000001] rcu:      RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[  +0.000000] rcu:      RCU priority boosting: priority 1 delay 500 ms.
[  +0.000001]   Trampoline variant of Tasks RCU enabled.
[  +0.000000]   Rude variant of Tasks RCU enabled.
[  +0.000001]   Tracing variant of Tasks RCU enabled.
[  +0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[  +0.000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[  +0.002415] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[  +0.000165] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[  +0.000084] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[  +0.000021] spurious 8259A interrupt: IRQ7.
[  +0.000012] Console: colour dummy device 80x25
[  +0.000011] printk: console [tty0] enabled
[  +0.000016] ACPI: Core revision 20220331
[  +0.000109] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[  +0.000015] APIC: Switch to symmetric I/O mode setup
[  +0.000749] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[  +0.000238] x2apic enabled
[  +0.000005] Switched APIC routing to cluster x2apic.
[  +0.000596] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[  +0.015086] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e43feb156, max_idle_ns: 440795209785 ns
[  +0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.95 BogoMIPS (lpj=11999933)
[  +0.000002] pid_max: default: 32768 minimum: 301
[  +0.000016] LSM: Security Framework initializing
[  +0.000004] landlock: Up and running.
[  +0.000001] Yama: becoming mindful.
[  +0.000004] LSM support for eBPF active
[  +0.000026] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[  +0.000015] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[  +0.000135] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[  +0.000018] LVT offset 1 assigned for vector 0xf9
[  +0.000056] LVT offset 2 assigned for vector 0xf4
[  +0.000016] process: using mwait in idle threads
[  +0.000000] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[  +0.000001] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[  +0.000002] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[  +0.000002] Spectre V2 : Mitigation: Retpolines
[  +0.000000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[  +0.000001] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[  +0.000000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[  +0.000001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[  +0.000000] Spectre V2 : User space: Mitigation: STIBP always-on protection
[  +0.000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[  +0.012519] Freeing SMP alternatives memory: 40K
[  +0.108295] smpboot: CPU0: AMD Ryzen 5 5500 (family: 0x19, model: 0x50, stepping: 0x0)
[  +0.000079] cblist_init_generic: Setting adjustable number of callback queues.
[  +0.000002] cblist_init_generic: Setting shift to 5 and lim to 1.
[  +0.000008] cblist_init_generic: Setting shift to 5 and lim to 1.
[  +0.000009] cblist_init_generic: Setting shift to 5 and lim to 1.
[  +0.000007] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[  +0.000003] ... version:                0
[  +0.000001] ... bit width:              48
[  +0.000000] ... generic registers:      6
[  +0.000000] ... value mask:             0000ffffffffffff
[  +0.000001] ... max period:             00007fffffffffff
[  +0.000000] ... fixed-purpose events:   0
[  +0.000001] ... event mask:             000000000000003f
[  +0.000049] rcu: Hierarchical SRCU implementation.
[  +0.000000] rcu:      Max phase no-delay instances is 1000.
[  +0.000272] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[  +0.000138] smp: Bringing up secondary CPUs ...
[  +0.000053] x86: Booting SMP configuration:
[  +0.000001] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[  +0.011642] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[  +0.000024]   #7  #8  #9 #10 #11
[  +0.009947] smp: Brought up 1 node, 12 CPUs
[  +0.000000] smpboot: Max logical packages: 3
[  +0.000000] smpboot: Total of 12 processors activated (86434.49 BogoMIPS)
[  +0.000660] devtmpfs: initialized
[  +0.000000] x86/mm: Memory block size: 128MB
[  +0.000000] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes)
[  +0.000000] ACPI: PM: Registering ACPI NVS region [mem 0xc3f54000-0xc5a44fff] (28250112 bytes)
[  +0.002727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[  +0.000018] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[  +0.000040] pinctrl core: initialized pinctrl subsystem
[  +0.000075] PM: RTC time: 15:46:56, date: 2023-02-22
[  +0.000237] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[  +0.000104] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[  +0.000063] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[  +0.000061] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[  +0.000006] audit: initializing netlink subsys (disabled)
[  +0.000004] audit: type=2000 audit(1677080815.163:1): state=initialized audit_enabled=0 res=1
[  +0.000000] thermal_sys: Registered thermal governor 'fair_share'
[  +0.000000] thermal_sys: Registered thermal governor 'bang_bang'
[  +0.000000] thermal_sys: Registered thermal governor 'step_wise'
[  +0.000000] thermal_sys: Registered thermal governor 'user_space'
[  +0.000000] thermal_sys: Registered thermal governor 'power_allocator'
[  +0.000000] cpuidle: using governor ladder
[  +0.000000] cpuidle: using governor menu
[  +0.000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[  +0.000000] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[  +0.000000] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[  +0.000000] PCI: Using configuration type 1 for base access
[  +0.000000] mtrr: your CPUs had inconsistent variable MTRR settings
[  +0.000000] mtrr: probably your BIOS does not setup all CPUs.
[  +0.000000] mtrr: corrected configuration.
[  +0.000231] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[  +0.000011] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[  +0.000000] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[  +0.000000] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[  +0.000000] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[  +0.000000] ACPI: Added _OSI(Module Device)
[  +0.000000] ACPI: Added _OSI(Processor Device)
[  +0.000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[  +0.000000] ACPI: Added _OSI(Processor Aggregator Device)
[  +0.009224] ACPI: 11 ACPI AML tables successfully acquired and loaded
[  +0.000905] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[  +0.002669] ACPI: Interpreter enabled
[  +0.000010] ACPI: PM: (supports S0 S3 S4 S5)
[  +0.000001] ACPI: Using IOAPIC for interrupt routing
[  +0.000226] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[  +0.000001] PCI: Using E820 reservations for host bridge windows
[  +0.000210] ACPI: Enabled 4 GPEs in block 00 to 1F
[  +0.010726] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[  +0.000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[  +0.000077] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
[  +0.000139] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[  +0.000008] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[  +0.000241] PCI host bridge to bus 0000:00
[  +0.000001] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[  +0.000001] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[  +0.000001] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[  +0.000001] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[  +0.000000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[  +0.000001] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec2ffff window]
[  +0.000001] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[  +0.000001] pci_bus 0000:00: root bus resource [bus 00-ff]
[  +0.000010] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[  +0.000068] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[  +0.000067] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[  +0.000039] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
[  +0.000046] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[  +0.000063] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[  +0.000039] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
[  +0.000020] pci 0000:00:02.1: enabling Extended Tags
[  +0.000026] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[  +0.000069] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
[  +0.000020] pci 0000:00:02.2: enabling Extended Tags
[  +0.000026] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[  +0.000065] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[  +0.000037] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[  +0.000019] pci 0000:00:08.1: enabling Extended Tags
[  +0.000027] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[  +0.000093] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[  +0.000096] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[  +0.000107] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000
[  +0.000019] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000
[  +0.000018] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000
[  +0.000019] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000
[  +0.000019] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000
[  +0.000019] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000
[  +0.000018] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000
[  +0.000018] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000
[  +0.000072] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400
[  +0.000012] pci 0000:01:00.0: reg 0x10: [mem 0xfcc00000-0xfcc03fff]
[  +0.000087] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[  +0.000065] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
[  +0.000069] pci 0000:00:01.1: PCI bridge to [bus 01-03]
[  +0.000003] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[  +0.000002] pci 0000:00:01.1:   bridge window [mem 0xfca00000-0xfccfffff]
[  +0.000002] pci 0000:00:01.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000044] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400
[  +0.000097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[  +0.000419] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[  +0.000005] pci 0000:01:00.0:   bridge window [io  0xf000-0xffff]
[  +0.000002] pci 0000:01:00.0:   bridge window [mem 0xfca00000-0xfcbfffff]
[  +0.000004] pci 0000:01:00.0:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000049] pci 0000:03:00.0: [1002:73ff] type 00 class 0x030000
[  +0.000015] pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[  +0.000010] pci 0000:03:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[  +0.000006] pci 0000:03:00.0: reg 0x20: [io  0xf000-0xf0ff]
[  +0.000007] pci 0000:03:00.0: reg 0x24: [mem 0xfca00000-0xfcafffff]
[  +0.000006] pci 0000:03:00.0: reg 0x30: [mem 0xfcb00000-0xfcb1ffff pref]
[  +0.000025] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[  +0.000056] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[  +0.000067] pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[  +0.000068] pci 0000:03:00.1: [1002:ab28] type 00 class 0x040300
[  +0.000012] pci 0000:03:00.1: reg 0x10: [mem 0xfcb20000-0xfcb23fff]
[  +0.000086] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[  +0.000097] pci 0000:02:00.0: PCI bridge to [bus 03]
[  +0.000004] pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
[  +0.000002] pci 0000:02:00.0:   bridge window [mem 0xfca00000-0xfcbfffff]
[  +0.000004] pci 0000:02:00.0:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000056] pci 0000:04:00.0: [1022:43ec] type 00 class 0x0c0330
[  +0.000016] pci 0000:04:00.0: reg 0x10: [mem 0xfcea0000-0xfcea7fff 64bit]
[  +0.000037] pci 0000:04:00.0: enabling Extended Tags
[  +0.000048] pci 0000:04:00.0: PME# supported from D3hot D3cold
[  +0.000105] pci 0000:04:00.1: [1022:43eb] type 00 class 0x010601
[  +0.000044] pci 0000:04:00.1: reg 0x24: [mem 0xfce80000-0xfce9ffff]
[  +0.000007] pci 0000:04:00.1: reg 0x30: [mem 0xfce00000-0xfce7ffff pref]
[  +0.000005] pci 0000:04:00.1: enabling Extended Tags
[  +0.000037] pci 0000:04:00.1: PME# supported from D3hot D3cold
[  +0.000061] pci 0000:04:00.2: [1022:43e9] type 01 class 0x060400
[  +0.000040] pci 0000:04:00.2: enabling Extended Tags
[  +0.000041] pci 0000:04:00.2: PME# supported from D3hot D3cold
[  +0.000066] pci 0000:00:02.1: PCI bridge to [bus 04-09]
[  +0.000002] pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
[  +0.000002] pci 0000:00:02.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[  +0.000079] pci 0000:05:00.0: [1022:43ea] type 01 class 0x060400
[  +0.000043] pci 0000:05:00.0: enabling Extended Tags
[  +0.000048] pci 0000:05:00.0: PME# supported from D3hot D3cold
[  +0.000079] pci 0000:05:01.0: [1022:43ea] type 01 class 0x060400
[  +0.000043] pci 0000:05:01.0: enabling Extended Tags
[  +0.000048] pci 0000:05:01.0: PME# supported from D3hot D3cold
[  +0.000077] pci 0000:05:02.0: [1022:43ea] type 01 class 0x060400
[  +0.000043] pci 0000:05:02.0: enabling Extended Tags
[  +0.000048] pci 0000:05:02.0: PME# supported from D3hot D3cold
[  +0.000077] pci 0000:05:03.0: [1022:43ea] type 01 class 0x060400
[  +0.000043] pci 0000:05:03.0: enabling Extended Tags
[  +0.000048] pci 0000:05:03.0: PME# supported from D3hot D3cold
[  +0.000091] pci 0000:04:00.2: PCI bridge to [bus 05-09]
[  +0.000005] pci 0000:04:00.2:   bridge window [io  0xe000-0xefff]
[  +0.000002] pci 0000:04:00.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[  +0.000035] pci 0000:05:00.0: PCI bridge to [bus 06]
[  +0.000041] pci 0000:05:01.0: PCI bridge to [bus 07]
[  +0.000037] pci 0000:05:02.0: PCI bridge to [bus 08]
[  +0.000067] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[  +0.000026] pci 0000:09:00.0: reg 0x10: [io  0xe000-0xe0ff]
[  +0.000036] pci 0000:09:00.0: reg 0x18: [mem 0xfcd04000-0xfcd04fff 64bit]
[  +0.000022] pci 0000:09:00.0: reg 0x20: [mem 0xfcd00000-0xfcd03fff 64bit]
[  +0.000143] pci 0000:09:00.0: supports D1 D2
[  +0.000001] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  +0.000220] pci 0000:05:03.0: PCI bridge to [bus 09]
[  +0.000004] pci 0000:05:03.0:   bridge window [io  0xe000-0xefff]
[  +0.000002] pci 0000:05:03.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[  +0.000061] pci 0000:0a:00.0: [1d79:2263] type 00 class 0x010802
[  +0.000019] pci 0000:0a:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
[  +0.000200] pci 0000:00:02.2: PCI bridge to [bus 0a]
[  +0.000003] pci 0000:00:02.2:   bridge window [mem 0xfcf00000-0xfcffffff]
[  +0.000048] pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000
[  +0.000033] pci 0000:0b:00.0: enabling Extended Tags
[  +0.000063] pci 0000:0b:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[  +0.000049] pci 0000:0b:00.1: [1002:1637] type 00 class 0x040300
[  +0.000008] pci 0000:0b:00.1: reg 0x10: [mem 0xfc908000-0xfc90bfff]
[  +0.000025] pci 0000:0b:00.1: enabling Extended Tags
[  +0.000027] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold
[  +0.000047] pci 0000:0b:00.2: [1022:15df] type 00 class 0x108000
[  +0.000014] pci 0000:0b:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[  +0.000012] pci 0000:0b:00.2: reg 0x24: [mem 0xfc90c000-0xfc90dfff]
[  +0.000007] pci 0000:0b:00.2: enabling Extended Tags
[  +0.000073] pci 0000:0b:00.3: [1022:1639] type 00 class 0x0c0330
[  +0.000010] pci 0000:0b:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
[  +0.000021] pci 0000:0b:00.3: enabling Extended Tags
[  +0.000028] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[  +0.000050] pci 0000:0b:00.4: [1022:1639] type 00 class 0x0c0330
[  +0.000010] pci 0000:0b:00.4: reg 0x10: [mem 0xfc600000-0xfc6fffff 64bit]
[  +0.000021] pci 0000:0b:00.4: enabling Extended Tags
[  +0.000028] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[  +0.000050] pci 0000:0b:00.6: [1022:15e3] type 00 class 0x040300
[  +0.000008] pci 0000:0b:00.6: reg 0x10: [mem 0xfc900000-0xfc907fff]
[  +0.000025] pci 0000:0b:00.6: enabling Extended Tags
[  +0.000026] pci 0000:0b:00.6: PME# supported from D0 D3hot D3cold
[  +0.000059] pci 0000:00:08.1: PCI bridge to [bus 0b]
[  +0.000003] pci 0000:00:08.1:   bridge window [mem 0xfc600000-0xfc9fffff]
[  +0.000401] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[  +0.000038] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[  +0.000032] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[  +0.000040] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[  +0.000036] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[  +0.000030] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[  +0.000030] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[  +0.000029] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[  +0.001868] iommu: Default domain type: Translated 
[  +0.000000] iommu: DMA domain TLB invalidation policy: lazy mode 
[  +0.000079] SCSI subsystem initialized
[  +0.000004] libata version 3.00 loaded.
[  +0.000000] ACPI: bus type USB registered
[  +0.000000] usbcore: registered new interface driver usbfs
[  +0.000000] usbcore: registered new interface driver hub
[  +0.000000] usbcore: registered new device driver usb
[  +0.000000] pps_core: LinuxPPS API ver. 1 registered
[  +0.000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[  +0.000000] PTP clock support registered
[  +0.000000] EDAC MC: Ver: 3.0.0
[  +0.000017] NetLabel: Initializing
[  +0.000000] NetLabel:  domain hash size = 128
[  +0.000000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[  +0.000000] NetLabel:  unlabeled traffic allowed by default
[  +0.000000] mctp: management component transport protocol core
[  +0.000000] NET: Registered PF_MCTP protocol family
[  +0.000000] PCI: Using ACPI for IRQ routing
[  +0.002850] PCI: pci_cache_line_size set to 64 bytes
[  +0.000057] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[  +0.000002] e820: reserve RAM buffer [mem 0x09d0f000-0x0bffffff]
[  +0.000000] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[  +0.000001] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[  +0.000000] e820: reserve RAM buffer [mem 0xaa4b2000-0xabffffff]
[  +0.000001] e820: reserve RAM buffer [mem 0xc39a6000-0xc3ffffff]
[  +0.000001] e820: reserve RAM buffer [mem 0x42e300000-0x42fffffff]
[  +0.000324] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[  +0.000000] pci 0000:03:00.0: vgaarb: bridge control possible
[  +0.000000] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[  +0.000000] vgaarb: loaded
[  +0.000004] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[  +0.000003] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[  +0.004357] clocksource: Switched to clocksource tsc-early
[  +0.000064] VFS: Disk quotas dquot_6.6.0
[  +0.000008] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0.000040] pnp: PnP ACPI init
[  +0.000057] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[  +0.000037] system 00:01: [mem 0x1000000000000 window] could not be reserved
[  +0.000136] system 00:03: [io  0x0290-0x029f] has been reserved
[  +0.000002] system 00:03: [io  0x0200-0x021f] has been reserved
[  +0.000185] pnp 00:04: [dma 0 disabled]
[  +0.000191] system 00:05: [io  0x04d0-0x04d1] has been reserved
[  +0.000001] system 00:05: [io  0x040b] has been reserved
[  +0.000001] system 00:05: [io  0x04d6] has been reserved
[  +0.000001] system 00:05: [io  0x0c00-0x0c01] has been reserved
[  +0.000000] system 00:05: [io  0x0c14] has been reserved
[  +0.000001] system 00:05: [io  0x0c50-0x0c51] has been reserved
[  +0.000001] system 00:05: [io  0x0c52] has been reserved
[  +0.000000] system 00:05: [io  0x0c6c] has been reserved
[  +0.000001] system 00:05: [io  0x0c6f] has been reserved
[  +0.000001] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[  +0.000000] system 00:05: [io  0x0800-0x089f] has been reserved
[  +0.000001] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[  +0.000001] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[  +0.000000] system 00:05: [io  0x0900-0x090f] has been reserved
[  +0.000001] system 00:05: [io  0x0910-0x091f] has been reserved
[  +0.000001] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[  +0.000001] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[  +0.000001] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[  +0.000001] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[  +0.000001] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[  +0.000001] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[  +0.000001] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[  +0.000476] pnp: PnP ACPI: found 6 devices
[  +0.004117] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[  +0.000042] NET: Registered PF_INET protocol family
[  +0.000148] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[  +0.001930] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[  +0.000020] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[  +0.000062] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[  +0.000175] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[  +0.000086] TCP: Hash tables configured (established 131072 bind 65536)
[  +0.000065] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[  +0.000031] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[  +0.000033] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[  +0.000045] NET: Registered PF_UNIX/PF_LOCAL protocol family
[  +0.000004] NET: Registered PF_XDP protocol family
[  +0.000008] pci 0000:02:00.0: PCI bridge to [bus 03]
[  +0.000007] pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
[  +0.000003] pci 0000:02:00.0:   bridge window [mem 0xfca00000-0xfcbfffff]
[  +0.000003] pci 0000:02:00.0:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000004] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[  +0.000001] pci 0000:01:00.0:   bridge window [io  0xf000-0xffff]
[  +0.000003] pci 0000:01:00.0:   bridge window [mem 0xfca00000-0xfcbfffff]
[  +0.000002] pci 0000:01:00.0:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000004] pci 0000:00:01.1: PCI bridge to [bus 01-03]
[  +0.000001] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[  +0.000002] pci 0000:00:01.1:   bridge window [mem 0xfca00000-0xfccfffff]
[  +0.000002] pci 0000:00:01.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000003] pci 0000:05:00.0: PCI bridge to [bus 06]
[  +0.000013] pci 0000:05:01.0: PCI bridge to [bus 07]
[  +0.000009] pci 0000:05:02.0: PCI bridge to [bus 08]
[  +0.000009] pci 0000:05:03.0: PCI bridge to [bus 09]
[  +0.000002] pci 0000:05:03.0:   bridge window [io  0xe000-0xefff]
[  +0.000003] pci 0000:05:03.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[  +0.000006] pci 0000:04:00.2: PCI bridge to [bus 05-09]
[  +0.000002] pci 0000:04:00.2:   bridge window [io  0xe000-0xefff]
[  +0.000003] pci 0000:04:00.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[  +0.000006] pci 0000:00:02.1: PCI bridge to [bus 04-09]
[  +0.000001] pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
[  +0.000002] pci 0000:00:02.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[  +0.000003] pci 0000:00:02.2: PCI bridge to [bus 0a]
[  +0.000002] pci 0000:00:02.2:   bridge window [mem 0xfcf00000-0xfcffffff]
[  +0.000004] pci 0000:00:08.1: PCI bridge to [bus 0b]
[  +0.000001] pci 0000:00:08.1:   bridge window [mem 0xfc600000-0xfc9fffff]
[  +0.000004] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[  +0.000001] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[  +0.000001] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[  +0.000000] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[  +0.000001] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[  +0.000001] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec2ffff window]
[  +0.000000] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[  +0.000001] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[  +0.000001] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfccfffff]
[  +0.000000] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000001] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[  +0.000000] pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfcbfffff]
[  +0.000001] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000001] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[  +0.000000] pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfcbfffff]
[  +0.000001] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[  +0.000001] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[  +0.000000] pci_bus 0000:04: resource 1 [mem 0xfcd00000-0xfcefffff]
[  +0.000001] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[  +0.000000] pci_bus 0000:05: resource 1 [mem 0xfcd00000-0xfcdfffff]
[  +0.000001] pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
[  +0.000000] pci_bus 0000:09: resource 1 [mem 0xfcd00000-0xfcdfffff]
[  +0.000001] pci_bus 0000:0a: resource 1 [mem 0xfcf00000-0xfcffffff]
[  +0.000001] pci_bus 0000:0b: resource 1 [mem 0xfc600000-0xfc9fffff]
[  +0.000061] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[  +0.000137] pci 0000:0b:00.3: extending delay after power-on from D3hot to 20 msec
[  +0.000066] pci 0000:0b:00.4: extending delay after power-on from D3hot to 20 msec
[  +0.000046] PCI: CLS 64 bytes, default 64
[  +0.000006] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[  +0.000020] pci 0000:00:01.0: Adding to iommu group 0
[  +0.000003] Trying to unpack rootfs image as initramfs...
[  +0.000003] pci 0000:00:01.1: Adding to iommu group 1
[  +0.000007] pci 0000:00:02.0: Adding to iommu group 2
[  +0.000005] pci 0000:00:02.1: Adding to iommu group 3
[  +0.000006] pci 0000:00:02.2: Adding to iommu group 4
[  +0.000006] pci 0000:00:08.0: Adding to iommu group 5
[  +0.000005] pci 0000:00:08.1: Adding to iommu group 6
[  +0.000007] pci 0000:00:14.0: Adding to iommu group 7
[  +0.000004] pci 0000:00:14.3: Adding to iommu group 7
[  +0.000016] pci 0000:00:18.0: Adding to iommu group 8
[  +0.000005] pci 0000:00:18.1: Adding to iommu group 8
[  +0.000005] pci 0000:00:18.2: Adding to iommu group 8
[  +0.000004] pci 0000:00:18.3: Adding to iommu group 8
[  +0.000004] pci 0000:00:18.4: Adding to iommu group 8
[  +0.000005] pci 0000:00:18.5: Adding to iommu group 8
[  +0.000004] pci 0000:00:18.6: Adding to iommu group 8
[  +0.000005] pci 0000:00:18.7: Adding to iommu group 8
[  +0.000007] pci 0000:01:00.0: Adding to iommu group 9
[  +0.000005] pci 0000:02:00.0: Adding to iommu group 10
[  +0.000009] pci 0000:03:00.0: Adding to iommu group 11
[  +0.000009] pci 0000:03:00.1: Adding to iommu group 12
[  +0.000010] pci 0000:04:00.0: Adding to iommu group 13
[  +0.000006] pci 0000:04:00.1: Adding to iommu group 13
[  +0.000005] pci 0000:04:00.2: Adding to iommu group 13
[  +0.000003] pci 0000:05:00.0: Adding to iommu group 13
[  +0.000003] pci 0000:05:01.0: Adding to iommu group 13
[  +0.000002] pci 0000:05:02.0: Adding to iommu group 13
[  +0.000003] pci 0000:05:03.0: Adding to iommu group 13
[  +0.000003] pci 0000:09:00.0: Adding to iommu group 13
[  +0.000005] pci 0000:0a:00.0: Adding to iommu group 14
[  +0.000020] pci 0000:0b:00.0: Adding to iommu group 15
[  +0.000006] pci 0000:0b:00.1: Adding to iommu group 16
[  +0.000007] pci 0000:0b:00.2: Adding to iommu group 17
[  +0.000006] pci 0000:0b:00.3: Adding to iommu group 18
[  +0.000006] pci 0000:0b:00.4: Adding to iommu group 19
[  +0.000006] pci 0000:0b:00.6: Adding to iommu group 20
[  +0.002084] pci 0000:00:00.2: can't derive routing for PCI INT A
[  +0.000002] pci 0000:00:00.2: PCI INT A: not connected
[  +0.000159] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[  +0.000001] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[  +0.000003] AMD-Vi: Interrupt remapping enabled
[  +0.000001] AMD-Vi: X2APIC enabled
[  +0.027365] AMD-Vi: Virtual APIC enabled
[  +0.000051] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[  +0.000002] software IO TLB: mapped [mem 0x00000000bf9a6000-0x00000000c39a6000] (64MB)
[  +0.000026] LVT offset 0 assigned for vector 0x400
[  +0.000061] perf: AMD IBS detected (0x000003ff)
[  +0.000008] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[  +0.000775] Initialise system trusted keyrings
[  +0.000007] Key type blacklist registered
[  +0.000018] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[  +0.000512] zbud: loaded
[  +0.000110] integrity: Platform Keyring initialized
[  +0.000002] integrity: Machine keyring initialized
[  +0.002530] Key type asymmetric registered
[  +0.000001] Asymmetric key parser 'x509' registered
[  +0.021947] Freeing initrd memory: 31540K
[  +0.001672] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[  +0.000018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[  +0.000029] io scheduler mq-deadline registered
[  +0.000001] io scheduler kyber registered
[  +0.000029] io scheduler bfq registered
[  +0.002034] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  +0.000064] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[  +0.000009] ACPI: button: Power Button [PWRB]
[  +0.000014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[  +0.000023] ACPI: button: Power Button [PWRF]
[  +0.000056] Estimated ratio of average max frequency by base frequency (times 1024): 1119
[  +0.000008] Monitor-Mwait will be used to enter C-1 state
[  +0.000004] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[  +0.000058] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[  +0.000070] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[  +0.000068] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[  +0.000060] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[  +0.000064] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[  +0.000047] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[  +0.000059] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[  +0.000060] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[  +0.000075] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[  +0.000048] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[  +0.000058] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[  +0.000138] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[  +0.000136] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[  +0.001046] Non-volatile memory driver v1.3
[  +0.000001] Linux agpgart interface v0.103
[  +0.074099] AMD-Vi: AMD IOMMUv2 loaded and initialized
[  +0.000045] ACPI: bus type drm_connector registered
[  +0.000942] ahci 0000:04:00.1: version 3.0
[  +0.000096] ahci 0000:04:00.1: SSS flag set, parallel bus scan disabled
[  +0.000031] ahci 0000:04:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
[  +0.000002] ahci 0000:04:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[  +0.000212] scsi host0: ahci
[  +0.000090] scsi host1: ahci
[  +0.000058] scsi host2: ahci
[  +0.000069] scsi host3: ahci
[  +0.000053] scsi host4: ahci
[  +0.000055] scsi host5: ahci
[  +0.000021] ata1: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80100 irq 42
[  +0.000002] ata2: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80180 irq 42
[  +0.000000] ata3: DUMMY
[  +0.000001] ata4: DUMMY
[  +0.000001] ata5: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80300 irq 42
[  +0.000001] ata6: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80380 irq 42
[  +0.000074] usbcore: registered new interface driver usbserial_generic
[  +0.000002] usbserial: USB Serial support registered for generic
[  +0.000062] rtc_cmos 00:02: RTC can wake from S4
[  +0.000169] rtc_cmos 00:02: registered as rtc0
[  +0.000025] rtc_cmos 00:02: setting system clock to 2023-02-22T15:46:56 UTC (1677080816)
[  +0.000018] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[  +0.000155] ledtrig-cpu: registered to indicate activity on CPUs
[  +0.000089] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[  +0.000001] vesafb: scrolling: redraw
[  +0.000001] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[  +0.000031] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000827e662d, using 8128k, total 8128k
[  +0.000017] fbcon: Deferring console take-over
[  +0.000000] fb0: VESA VGA frame buffer device
[  +0.000007] hid: raw HID events driver (C) Jiri Kosina
[  +0.000045] drop_monitor: Initializing network drop monitor service
[  +0.006312] Initializing XFRM netlink socket
[  +0.000049] NET: Registered PF_INET6 protocol family
[  +0.001802] Segment Routing with IPv6
[  +0.000001] RPL Segment Routing with IPv6
[  +0.000005] In-situ OAM (IOAM) with IPv6
[  +0.000013] NET: Registered PF_PACKET protocol family
[  +0.000455] microcode: CPU0: patch_level=0x0a50000d
[  +0.000003] microcode: CPU1: patch_level=0x0a50000d
[  +0.000003] microcode: CPU2: patch_level=0x0a50000d
[  +0.000005] microcode: CPU3: patch_level=0x0a50000d
[  +0.000005] microcode: CPU4: patch_level=0x0a50000d
[  +0.000004] microcode: CPU5: patch_level=0x0a50000d
[  +0.000004] microcode: CPU6: patch_level=0x0a50000d
[  +0.000003] microcode: CPU7: patch_level=0x0a50000d
[  +0.000003] microcode: CPU8: patch_level=0x0a50000d
[  +0.000004] microcode: CPU9: patch_level=0x0a50000d
[  +0.000004] microcode: CPU10: patch_level=0x0a50000d
[  +0.000003] microcode: CPU11: patch_level=0x0a50000d
[  +0.000002] microcode: Microcode Update Driver: v2.2.
[  +0.000065] resctrl: L3 allocation detected
[  +0.000000] resctrl: MB allocation detected
[  +0.000001] resctrl: L3 monitoring detected
[  +0.000002] IPI shorthand broadcast: enabled
[  +0.000019] sched_clock: Marking stable (419883811, 248878)->(1559150291, -1139017602)
[  +0.000195] registered taskstats version 1
[  +0.000104] Loading compiled-in X.509 certificates
[  +0.001794] Loaded X.509 cert 'Build time autogenerated kernel key: 3f85e1b84b8d1aa77c32de9c1f3fe41da6ce9978'
[  +0.000585] zswap: loaded using pool lz4/z3fold
[  +0.000127] Key type .fscrypt registered
[  +0.000001] Key type fscrypt-provisioning registered
[  +0.000662] PM:   Magic number: 11:455:791
[  +0.000013] pci_express 0000:00:08.1:pcie010: hash matches
[  +0.000100] RAS: Correctable Errors collector initialized.
[  +0.301720] ata1: SATA link down (SStatus 0 SControl 330)
[  +0.315591] ata2: SATA link down (SStatus 0 SControl 330)
[  +0.272852] tsc: Refined TSC clocksource calibration: 3605.044 MHz
[  +0.000010] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33f6f0ac5e1, max_idle_ns: 440795368952 ns
[  +0.000032] clocksource: Switched to clocksource tsc
[  +0.043030] ata5: SATA link down (SStatus 0 SControl 330)
[  +0.313511] ata6: SATA link down (SStatus 0 SControl 330)
[  +0.000852] Freeing unused decrypted memory: 2036K
[  +0.000159] Freeing unused kernel image (initmem) memory: 2144K
[  +0.000002] Write protecting the kernel read-only data: 30720k
[  +0.000254] Freeing unused kernel image (text/rodata gap) memory: 2040K
[  +0.000107] Freeing unused kernel image (rodata/data gap) memory: 1212K
[  +0.023274] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[  +0.000003] rodata_test: all tests were successful
[  +0.000003] Run /init as init process
[  +0.000001]   with arguments:
[  +0.000000]     /init
[  +0.000001]   with environment:
[  +0.000000]     HOME=/
[  +0.000000]     TERM=linux
[  +0.000001]     BOOT_IMAGE=/boot/vmlinuz-linux
[  +0.007517] fbcon: Taking over console
[  +0.000045] Console: switching to colour frame buffer device 240x67
[  +0.085117] xhci_hcd 0000:04:00.0: xHCI Host Controller
[  +0.000008] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[  +0.010272] nvme nvme0: pci function 0000:0a:00.0
[  +0.019587] nvme nvme0: allocated 64 MiB host memory buffer.
[  +0.025344] xhci_hcd 0000:04:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[  +0.000295] xhci_hcd 0000:04:00.0: xHCI Host Controller
[  +0.000003] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[  +0.000003] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[  +0.000048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[  +0.000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.000002] usb usb1: Product: xHCI Host Controller
[  +0.000000] usb usb1: Manufacturer: Linux 6.1.12-arch1-1 xhci-hcd
[  +0.000001] usb usb1: SerialNumber: 0000:04:00.0
[  +0.000120] hub 1-0:1.0: USB hub found
[  +0.000015] hub 1-0:1.0: 9 ports detected
[  +0.005957] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0.000011] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[  +0.000001] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.000001] usb usb2: Product: xHCI Host Controller
[  +0.000001] usb usb2: Manufacturer: Linux 6.1.12-arch1-1 xhci-hcd
[  +0.000000] usb usb2: SerialNumber: 0000:04:00.0
[  +0.000075] hub 2-0:1.0: USB hub found
[  +0.000005] hub 2-0:1.0: 3 ports detected
[  +0.000252] nvme nvme0: 15/0/0 default/read/poll queues
[  +0.001828] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[  +0.000003] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[  +0.000086] xhci_hcd 0000:0b:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[  +0.000228] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[  +0.000002] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[  +0.000001] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[  +0.000018] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[  +0.000001] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.000001] usb usb3: Product: xHCI Host Controller
[  +0.000000] usb usb3: Manufacturer: Linux 6.1.12-arch1-1 xhci-hcd
[  +0.000001] usb usb3: SerialNumber: 0000:0b:00.3
[  +0.000078] hub 3-0:1.0: USB hub found
[  +0.000005] hub 3-0:1.0: 4 ports detected
[  +0.000116] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0.000011] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[  +0.000001] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.000001] usb usb4: Product: xHCI Host Controller
[  +0.000000] usb usb4: Manufacturer: Linux 6.1.12-arch1-1 xhci-hcd
[  +0.000001] usb usb4: SerialNumber: 0000:0b:00.3
[  +0.000059] hub 4-0:1.0: USB hub found
[  +0.000003] hub 4-0:1.0: 2 ports detected
[  +0.000100] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[  +0.000002] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 5
[  +0.000087] xhci_hcd 0000:0b:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[  +0.000223] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[  +0.000001] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 6
[  +0.000002] xhci_hcd 0000:0b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[  +0.000016] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[  +0.000001] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.000001] usb usb5: Product: xHCI Host Controller
[  +0.000001] usb usb5: Manufacturer: Linux 6.1.12-arch1-1 xhci-hcd
[  +0.000000] usb usb5: SerialNumber: 0000:0b:00.4
[  +0.000072] hub 5-0:1.0: USB hub found
[  +0.000004] hub 5-0:1.0: 4 ports detected
[  +0.000083] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0.000009] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[  +0.000002] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0.000001] usb usb6: Product: xHCI Host Controller
[  +0.000001] usb usb6: Manufacturer: Linux 6.1.12-arch1-1 xhci-hcd
[  +0.000001] usb usb6: SerialNumber: 0000:0b:00.4
[  +0.000058] hub 6-0:1.0: USB hub found
[  +0.000003] hub 6-0:1.0: 2 ports detected
[  +0.005304]  nvme0n1: p1 p2
[  +0.228713] clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as unstable because the skew is too large:
[  +0.000004] clocksource:                       'hpet' wd_nsec: 507265658 wd_now: 2b38fe0 wd_last: 244bc4f mask: ffffffff
[  +0.000001] clocksource:                       'tsc' cs_nsec: 506556060 cs_now: d784c520c cs_last: d0b736050 mask: ffffffffffffffff
[  +0.000001] clocksource:                       'tsc' is current clocksource.
[  +0.000002] tsc: Marking TSC unstable due to clocksource watchdog
[  +0.000047] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[  +0.000001] sched_clock: Marking unstable (2086762345, 248770)<-(3226028717, -1139017602)
[  +0.000375] clocksource: Checking clocksource tsc synchronization from CPU 4 to CPUs 0,5,8.
[  +0.000071] clocksource: Switched to clocksource hpet
[  +0.009517] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[  +0.003680] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[  +0.152854] usb 5-1: New USB device found, idVendor=0000, idProduct=3825, bcdDevice= 1.00
[  +0.000003] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  +0.000001] usb 5-1: Product:  USB OPTICAL MOUSE
[  +0.136793] usb 5-2: new low-speed USB device number 3 using xhci_hcd
[  +0.015683] usb 1-1: config 1 has an invalid interface number: 2 but max is 1
[  +0.000003] usb 1-1: config 1 has no interface number 1
[  +0.011980] usb 1-1: New USB device found, idVendor=0b05, idProduct=19af, bcdDevice= 1.00
[  +0.000003] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000001] usb 1-1: Product: AURA LED Controller
[  +0.000001] usb 1-1: Manufacturer: AsusTek Computer Inc.
[  +0.000001] usb 1-1: SerialNumber: 9876543210
[  +0.128995] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[  +0.001533] usb 5-2: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[  +0.000003] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  +0.000001] usb 5-2: Product: USB Keyboard
[  +0.000001] usb 5-2: Manufacturer: SEM
[  +0.225676] usb 1-2: New USB device found, idVendor=0bda, idProduct=c811, bcdDevice= 2.00
[  +0.000003] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000001] usb 1-2: Product: 802.11ac NIC
[  +0.000001] usb 1-2: Manufacturer: Realtek
[  +0.000001] usb 1-2: SerialNumber: 123456
[  +0.023406] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/usb5/5-1/5-1:1.0/0003:0000:3825.0001/input/input2
[  +0.000044] hid-generic 0003:0000:3825.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:0b:00.4-1/input0
[  +0.002277] [drm] amdgpu kernel modesetting enabled.
[  +0.004865] hid-generic 0003:0B05:19AF.0002: hiddev96,hidraw1: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:04:00.0-1/input2
[  +0.000084] amdgpu: Virtual CRAT table created for CPU
[  +0.000007] amdgpu: Topology: Add CPU node
[  +0.000090] [drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73FF 0x1458:0x2337 0xC1).
[  +0.000007] [drm] register mmio base: 0xFCA00000
[  +0.000001] [drm] register mmio size: 1048576
[  +0.001998] [drm] add ip block number 0 <nv_common>
[  +0.000001] [drm] add ip block number 1 <gmc_v10_0>
[  +0.000000] [drm] add ip block number 2 <navi10_ih>
[  +0.000001] [drm] add ip block number 3 <psp>
[  +0.000000] [drm] add ip block number 4 <smu>
[  +0.000001] [drm] add ip block number 5 <dm>
[  +0.000000] [drm] add ip block number 6 <gfx_v10_0>
[  +0.000001] [drm] add ip block number 7 <sdma_v5_2>
[  +0.000001] [drm] add ip block number 8 <vcn_v3_0>
[  +0.000000] [drm] add ip block number 9 <jpeg_v3_0>
[  +0.000009] amdgpu 0000:03:00.0: No more image in the PCI ROM
[  +0.000012] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM BAR
[  +0.000001] amdgpu: ATOM BIOS: 113-D53201-R66XTGO
[  +0.000005] [drm] VCN(0) decode is enabled in VM mode
[  +0.000000] [drm] VCN(0) encode is enabled in VM mode
[  +0.000002] [drm] JPEG decode is enabled in VM mode
[  +0.000048] Console: switching to colour dummy device 80x25
[  +0.000012] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[  +0.000026] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[  +0.000004] amdgpu 0000:03:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF
[  +0.000007] [drm] Detected VRAM RAM=8176M, BAR=256M
[  +0.000001] [drm] RAM width 128bits GDDR6
[  +0.000028] [drm] amdgpu: 8176M of VRAM memory ready
[  +0.000001] [drm] amdgpu: 7892M of GTT memory ready.
[  +0.000007] [drm] GART: num cpu pages 131072, num gpu pages 131072
[  +0.000116] [drm] PCIE GART of 512M enabled (table at 0x0000008000800000).
[  +0.002304] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/usb5/5-2/5-2:1.0/0003:1A2C:2124.0003/input/input3
[  +0.003099] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[  +0.000003] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[  +0.051365] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:0b:00.4-2/input0
[  +0.004589] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/usb5/5-2/5-2:1.1/0003:1A2C:2124.0004/input/input4
[  +0.055166] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/usb5/5-2/5-2:1.1/0003:1A2C:2124.0004/input/input5
[  +0.000226] hid-generic 0003:1A2C:2124.0004: input,hidraw3: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:0b:00.4-2/input1
[  +0.000022] usbcore: registered new interface driver usbhid
[  +0.000001] usbhid: USB HID core driver
[Feb22 17:47] amdgpu 0000:03:00.0: amdgpu: STB initialized to 2048 entries
[  +0.003796] [drm] Loading DMUB firmware via PSP: version=0x02020017
[  +0.011949] [drm] use_doorbell being set to: [true]
[  +0.000018] [drm] use_doorbell being set to: [true]
[  +0.018382] [drm] Found VCN firmware Version ENC: 1.26 DEC: 2 VEP: 0 Revision: 0
[  +0.000006] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[  +0.065308] [drm] reserve 0xa00000 from 0x81fd000000 for PSP TMR
[  +0.098693] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[  +0.015129] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[  +0.000020] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013, smu fw program = 0, version = 0x003b2a00 (59.42.0)
[  +0.000003] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[  +0.000034] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable
[  +0.049286] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[  +0.000148] [drm] Display Core initialized with v3.2.207!
[  +0.001160] [drm] DMUB hardware initialized: version=0x02020017
[  +0.180563] [drm] kiq ring mec 2 pipe 1 q 0
[  +0.004699] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[  +0.000786] [drm] JPEG decode initialized successfully.
[  +0.001424] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[  +0.000139] amdgpu: sdma_bitmap: ffff
[  +0.034937] memmap_init_zone_device initialised 2097152 pages in 10ms
[  +0.000008] amdgpu: HMM registered 8176MB device memory
[  +0.000051] amdgpu: SRAT table not found
[  +0.000001] amdgpu: Virtual CRAT table created for GPU
[  +0.000117] amdgpu: Topology: Add dGPU node [0x73ff:0x1002]
[  +0.000003] kfd kfd: amdgpu: added device 1002:73ff
[  +0.000018] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 32
[  +0.000059] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[  +0.000000] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[  +0.000000] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[  +0.000000] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[  +0.000000] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
[  +0.000000] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
[  +0.000001] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[  +0.000904] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm
[  +0.000456] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:03:00.0 on minor 0
[  +0.007212] fbcon: amdgpudrmfb (fb0) is primary device
[  +0.000096] [drm] DSC precompute is not needed.
[  +0.107527] Console: switching to colour frame buffer device 240x67
[  +0.019928] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[  +0.092679] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[  +0.075692] systemd[1]: systemd 253-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[  +0.000004] systemd[1]: Detected architecture x86-64.
[  +0.001697] systemd[1]: Hostname set to <StarcClans>.
[  +0.614765] systemd[1]: bpf-lsm: LSM BPF program attached
[  +0.150121] systemd[1]: Queued start job for default target Graphical Interface.
[  +0.067131] systemd[1]: Created slice Virtual Machine and Container Slice.
[  +0.000309] systemd[1]: Created slice Slice /system/getty.
[  +0.000152] systemd[1]: Created slice Slice /system/modprobe.
[  +0.000152] systemd[1]: Created slice Slice /system/systemd-fsck.
[  +0.000119] systemd[1]: Created slice User and Session Slice.
[  +0.000044] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  +0.000031] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  +0.000099] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  +0.000055] systemd[1]: Reached target Local Encrypted Volumes.
[  +0.000016] systemd[1]: Reached target Login Prompts.
[  +0.000024] systemd[1]: Reached target Local Integrity Protected Volumes.
[  +0.000023] systemd[1]: Reached target Path Units.
[  +0.000016] systemd[1]: Reached target Remote File Systems.
[  +0.000014] systemd[1]: Reached target Slice Units.
[  +0.000017] systemd[1]: Reached target Swaps.
[  +0.000018] systemd[1]: Reached target Local Verity Protected Volumes.
[  +0.000044] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  +0.000072] systemd[1]: Listening on LVM2 poll daemon socket.
[  +0.000600] systemd[1]: Listening on Process Core Dump Socket.
[  +0.000065] systemd[1]: Listening on Journal Socket (/dev/log).
[  +0.000059] systemd[1]: Listening on Journal Socket.
[  +0.000071] systemd[1]: Listening on udev Control Socket.
[  +0.000050] systemd[1]: Listening on udev Kernel Socket.
[  +0.000617] systemd[1]: Mounting Huge Pages File System...
[  +0.000419] systemd[1]: Mounting POSIX Message Queue File System...
[  +0.000408] systemd[1]: Mounting Kernel Debug File System...
[  +0.000397] systemd[1]: Mounting Kernel Trace File System...
[  +0.000572] systemd[1]: Mounting Temporary Directory /tmp...
[  +0.000440] systemd[1]: Starting Create List of Static Device Nodes...
[  +0.000466] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  +0.000463] systemd[1]: Starting Load Kernel Module configfs...
[  +0.000413] systemd[1]: Starting Load Kernel Module dm_mod...
[  +0.000424] systemd[1]: Starting Load Kernel Module drm...
[  +0.000417] systemd[1]: Starting Load Kernel Module fuse...
[  +0.000415] systemd[1]: Starting Load Kernel Module loop...
[  +0.000043] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[  +0.000824] systemd[1]: Starting Journal Service...
[  +0.001274] systemd[1]: Starting Load Kernel Modules...
[  +0.000017] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[  +0.000585] systemd[1]: Starting Remount Root and Kernel File Systems...
[  +0.000631] systemd[1]: Starting Coldplug All udev Devices...
[  +0.000904] systemd[1]: Mounted Huge Pages File System.
[  +0.000069] loop: module loaded
[  +0.000000] systemd[1]: Mounted POSIX Message Queue File System.
[  +0.000053] systemd[1]: Mounted Kernel Debug File System.
[  +0.000049] systemd[1]: Mounted Kernel Trace File System.
[  +0.000052] systemd[1]: Mounted Temporary Directory /tmp.
[  +0.001596] EXT4-fs (nvme0n1p2): re-mounted. Quota mode: none.
[  +0.001477] systemd-journald[354]: Collecting audit messages is disabled.
[  +0.000728] fuse: init (API version 7.37)
[  +0.000499] device-mapper: uevent: version 1.0.3
[  +0.000065] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[  +0.007384] Asymmetric key parser 'pkcs8' registered
[  +0.010813] vboxdrv: loading out-of-tree module taints kernel.
[  +0.000098] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[  +0.005794] vboxdrv: Found 12 processor cores/threads
[  +0.022427] vboxdrv: TSC mode is Invariant, tentative frequency 3600356248 Hz
[  +0.000002] vboxdrv: Successfully loaded version 7.0.6 r155176 (interface 0x00330004)
[  +0.001973] VBoxNetAdp: Successfully started.
[  +0.002698] VBoxNetFlt: Successfully started.
[  +0.005059] systemd[1]: Finished Create List of Static Device Nodes.
[  +0.000549] systemd[1]: Started Journal Service.
[  +0.300961] systemd-journald[354]: Received client request to flush runtime journal.
[  +0.061220] systemd-journald[354]: /var/log/journal/5e515f00b8634a0a8cada6049a3ecaac/system.journal: Montonic clock jumped backwards relative to last journal entry, rotating.
[  +0.000006] systemd-journald[354]: Rotating system journal.
[  +0.343537] ccp 0000:0b:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[  +0.000363] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[  +0.000003] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[  +0.001305] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[  +0.008468] ccp 0000:0b:00.2: tee enabled
[  +0.000004] ccp 0000:0b:00.2: psp enabled
[  +0.000320] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[  +0.000339] input: PC Speaker as /devices/platform/pcspkr/input/input6
[  +0.000541] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[  +0.001118] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[  +0.051857] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[  +0.000003] RAPL PMU: hw unit of domain package 2^-16 Joules
[  +0.049867] cryptd: max_cpu_qlen set to 1000
[  +0.000355] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Quota mode: none.
[  +0.000040] mousedev: PS/2 mouse device common for all mice
[  +0.047901] AVX2 version of gcm_enc/dec engaged.
[  +0.000027] AES CTR mode by8 optimization enabled
[  +0.003337] asus_wmi: ASUS WMI generic driver loaded
[  +0.004424] asus_wmi: Initialization: 0x0
[  +0.000035] asus_wmi: BIOS WMI version: 0.9
[  +0.000183] asus_wmi: SFUN value: 0x0
[  +0.000002] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[  +0.001002] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[  +0.016955] r8169 0000:09:00.0 eth0: RTL8168h/8111h, fc:34:97:b5:f9:48, XID 541, IRQ 87
[  +0.000004] r8169 0000:09:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[  +0.000396] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[  +0.000002] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[  +0.001069] r8169 0000:09:00.0 enp9s0: renamed from eth0
[  +0.012049] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[  +0.008114] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card1/input13
[  +0.000038] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card1/input14
[  +0.000688] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card1/input15
[  +0.000028] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input8
[  +0.000016] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card1/input16
[  +0.000028] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card1/input17
[  +0.000029] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input9
[  +0.000032] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input10
[  +0.000074] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card1/input18
[  +0.001295] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input11
[  +0.001581] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input12
[  +0.033232] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[  +0.000006] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  +0.000001] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  +0.000002] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[  +0.000001] snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x11/0x0
[  +0.000001] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[  +0.000001] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[  +0.000001] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[  +0.000001] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
[  +0.004886] SVM: TSC scaling supported
[  +0.000002] kvm: Nested Virtualization enabled
[  +0.000000] SVM: kvm: Nested Paging enabled
[  +0.000004] SVM: Virtual VMLOAD VMSAVE supported
[  +0.000000] SVM: Virtual GIF supported
[  +0.000001] SVM: LBR virtualization supported
[  +0.012791] MCE: In-kernel MCE decoding enabled.
[  +0.000652] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input19
[  +0.000035] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input20
[  +0.000029] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input21
[  +0.000027] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input22
[  +0.000026] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input23
[  +0.008466] intel_rapl_common: Found RAPL domain package
[  +0.000002] intel_rapl_common: Found RAPL domain core
[  +0.404317] NET: Registered PF_ALG protocol family
[  +0.082319] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  +0.000210] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  +0.001603] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[  +0.000002] cfg80211: failed to load regulatory.db
[  +0.144360] Generic FE-GE Realtek PHY r8169-0-900:00: attached PHY driver (mii_bus:phy_addr=r8169-0-900:00, irq=MAC)
[  +0.187028] r8169 0000:09:00.0 enp9s0: Link is Down
[  +3.437258] systemd-journald[354]: /var/log/journal/5e515f00b8634a0a8cada6049a3ecaac/user-1000.journal: Montonic clock jumped backwards relative to last journal entry, rotating.
[  +0.000009] systemd-journald[354]: Failed to write entry to /var/log/journal/5e515f00b8634a0a8cada6049a3ecaac/user-1000.journal (29 items, 1054 bytes), rotating before retrying: Not a XENIX named type file
[  +0.176505] r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control off
[  +0.000012] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[  +2.468719] input: XP-PEN STYLUS as /devices/virtual/input/input24
[  +0.000080] input: XP-PEN MOUSE as /devices/virtual/input/input25
[  +0.000051] input: XP-PEN ERASER as /devices/virtual/input/input26
[Feb22 17:52] usb 1-2: USB disconnect, device number 3
[ +31.515640] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[  +0.231023] usb 1-2: New USB device found, idVendor=0bda, idProduct=c811, bcdDevice= 2.00
[  +0.000005] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000002] usb 1-2: Product: 802.11ac NIC
[  +0.000001] usb 1-2: Manufacturer: Realtek
[  +0.000001] usb 1-2: SerialNumber: 123456

Offline

#7 2023-02-22 16:12:19

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,378

Re: My usb wifi adapter won't work [SOLVED]

rtl8821CU/5.2.5.3: added

What is that?

pacman -Qs 8821

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2023-02-22 16:31:35

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

it is other driver that I installed

local/rtl8821au-dkms-git 5.12.5.2.r178.g45366a3-1
    rtl8821AU and rtl8811AU chipset driver with firmware v5.12.5.2

Last edited by StarcClans (2023-02-22 16:32:33)

Offline

#9 2023-02-22 16:50:13

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,378

Re: My usb wifi adapter won't work [SOLVED]

That's an AU driver, but you wanted th CU driver.
You do not seem to have any such driver installed.
https://aur.archlinux.org/packages/rtl8821cu-dkms-git

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2023-02-22 17:00:41

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: My usb wifi adapter won't work [SOLVED]

From the comments https://aur.archlinux.org/packages/rtl8 … r-dkms-git is likely the most fruitful implementation here (... not sure why that upstream creates new repos instead of normal commits every time though - ah to differentiate with actual realtek releases, still weird)

Also from that upstream repo note

Installation Information

Note: As of Linux kernel 6.2, an in-kernel driver for the chipsets supported by this driver has been included in the Linux kernel. The installation and removal scripts for the driver in this repo automatically deactivate the in-kernel driver on installation and reactivate the in-kernel driver on removal. No special action needs to be taken by users.

so you might not need an external module on the new kernel anymore.

Last edited by V1del (2023-02-22 17:07:38)

Offline

#11 2023-02-22 17:11:44

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

So what am I supposed to do?

Offline

#12 2023-02-22 17:22:56

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,378

Re: My usb wifi adapter won't work [SOLVED]

Install one of the CU drivers (both got recently updated and might work - you'll figure) or wait for linux 6.2 (currently in the testing repo)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2023-02-22 18:15:37

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

Is it from https://github.com/cilynx/rtl88x2bu.git ?

Offline

#14 2023-02-22 18:23:13

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,378

Re: My usb wifi adapter won't work [SOLVED]

Is what from that repo?

We've linked you 2 versions of the same driver in the AUR.
Try those one afzter another.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2023-02-22 19:46:27

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

OMG I solved it!

Thank you every and each one of you who helped me to solve this problem!

Sincerely StarcClans.

Offline

#16 2023-02-22 20:38:00

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: My usb wifi adapter won't work [SOLVED]

For future visitors, which of the options did you end up with?

Last edited by V1del (2023-02-22 20:38:43)

Offline

#17 2023-02-22 20:56:21

StarcClans
Member
Registered: 2023-02-22
Posts: 32

Re: My usb wifi adapter won't work [SOLVED]

I do not know just install both of them if you want. I think it was after I installed the https://aur.archlinux.org/packages/rtl8821cu-dkms-git that it changed and I was able but I might be wrong in that sense.

Offline

Pages: 1

Board footer

Powered by FluxBB