[SOLVED] How to check if X11 works from the console?

Zibi1981 · 2023-03-04 22:21:29

So I got my laptop an was able to install basic Arch on it with X11 and both: Intel and nVidia drivers for GPUs. Followed the wiki meticulously (as far as I'm aware). Now, before I will install my favorite DE (KDE), ArchWiki states:

Before installing Plasma, make sure you have a working Xorg installation on your system.

Now, last time I needed to install Arch was couple years ago, and I don't rememeber how to do that, and cannot find any easy way to check X11 works flawlessly form the console.

What's the easiest way?

Last edited by Zibi1981 (2023-03-06 22:06:06)

V1del · 2023-03-04 22:40:52

You can just install plasma and try to start that, you will notice if xorg fails. The "simplest" way is installing xorg-xinit and running the startx command which will give you a Xorg with a clock and three xterm windows, but that line in the wiki isn't really hugely relevant.

Zibi1981 · 2023-03-05 15:17:40

Well, unfortunatelly that line in the ArchWiki seems relevant, as when I've installed KDE and enabled SDDM, after reboot I'm stuck with hanging system without any output in the console. The only thing I can do is turn the power off.
Seems to my like some issue with two GPUs.

Here's my var/log/Xorg.0.log accesed from Windows

[     7.152] (--) Log file renamed from "/var/log/Xorg.pid-849.log" to "/var/log/Xorg.0.log"
[     7.153] 
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[     7.153] Current Operating System: Linux MSI-Arch 6.2.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 03 Mar 2023 15:58:31 +0000 x86_64
[     7.153] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fcef3735-b24e-d901-e0e0-3735b24ed901 rw ibt=off nvidia_drm.modeset=1 loglevel=3 quiet
[     7.153]  
[     7.153] Current version of pixman: 0.42.2
[     7.153] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.153] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.153] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar  5 16:00:47 2023
[     7.154] (==) Using config file: "/etc/X11/xorg.conf"
[     7.154] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.154] (==) ServerLayout "X.org Configured"
[     7.154] (**) |-->Screen "Screen0" (0)
[     7.154] (**) |   |-->Monitor "Monitor0"
[     7.155] (**) |   |-->Device "Card0"
[     7.155] (**) |-->Screen "Screen1" (1)
[     7.155] (**) |   |-->Monitor "Monitor1"
[     7.155] (**) |   |-->Device "Card1"
[     7.155] (**) |-->Input Device "Mouse0"
[     7.155] (**) |-->Input Device "Keyboard0"
[     7.155] (==) Automatically adding devices
[     7.155] (==) Automatically enabling devices
[     7.155] (==) Automatically adding GPU devices
[     7.155] (==) Automatically binding GPU devices
[     7.155] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.155] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     7.155] 	Entry deleted from font path.
[     7.155] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     7.155] 	Entry deleted from font path.
[     7.156] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     7.156] 	Entry deleted from font path.
[     7.156] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     7.156] 	Entry deleted from font path.
[     7.156] (**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     7.156] (**) ModulePath set to "/usr/lib/xorg/modules"
[     7.156] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     7.156] (WW) Disabling Mouse0
[     7.156] (WW) Disabling Keyboard0
[     7.156] (II) Module ABI versions:
[     7.156] 	X.Org ANSI C Emulation: 0.4
[     7.156] 	X.Org Video Driver: 25.2
[     7.156] 	X.Org XInput driver : 24.4
[     7.156] 	X.Org Server Extension : 10.0
[     7.157] (++) using VT number 1

[     7.157] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     7.157] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.157] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     7.180] (II) xfree86: Adding drm device (/dev/dri/card1)
[     7.180] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[     7.181] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     7.182] (--) PCI:*(0@0:2:0) 8086:a788:1462:13cd rev 4, Mem @ 0x6433000000/16777216, 0x4000000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[     7.182] (--) PCI: (1@0:0:0) 10de:2717:1462:13cd rev 161, Mem @ 0x5b000000/16777216, 0x6000000000/17179869184, 0x6400000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[     7.182] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     7.182] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[     7.182] (II) LoadModule: "glx"
[     7.183] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.185] (II) Module glx: vendor="X.Org Foundation"
[     7.185] 	compiled for 1.21.1.7, module version = 1.0.0
[     7.185] 	ABI class: X.Org Server Extension, version 10.0
[     7.185] (II) LoadModule: "nvidia"
[     7.185] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     7.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.187] 	compiled for 1.6.99.901, module version = 1.0.0
[     7.187] 	Module class: X.Org Video Driver
[     7.187] (II) NVIDIA dlloader X Driver  525.89.02  Wed Feb  1 23:14:37 UTC 2023
[     7.187] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     7.187] (II) Loading sub module "fb"
[     7.187] (II) LoadModule: "fb"
[     7.187] (II) Module "fb" already built-in
[     7.187] (II) Loading sub module "wfb"
[     7.187] (II) LoadModule: "wfb"
[     7.187] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     7.188] (II) Module wfb: vendor="X.Org Foundation"
[     7.188] 	compiled for 1.21.1.7, module version = 1.0.0
[     7.188] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     7.188] (II) Loading sub module "ramdac"
[     7.188] (II) LoadModule: "ramdac"
[     7.188] (II) Module "ramdac" already built-in
[     7.188] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     7.188] (==) NVIDIA(0): RGB weight 888
[     7.188] (==) NVIDIA(0): Default visual is TrueColor
[     7.188] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.188] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     7.188] (**) NVIDIA(0): Option "DPI" "144 x 144"
[     7.188] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     7.188] (**) NVIDIA(0): Enabling 2D acceleration
[     7.188] (II) Loading sub module "glxserver_nvidia"
[     7.188] (II) LoadModule: "glxserver_nvidia"
[     7.188] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     7.200] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     7.200] 	compiled for 1.6.99.901, module version = 1.0.0
[     7.200] 	Module class: X.Org Server Extension
[     7.200] (II) NVIDIA GLX Module  525.89.02  Wed Feb  1 23:13:01 UTC 2023
[     7.201] (II) NVIDIA: The X server supports PRIME Render Offload.
[     7.201] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     7.201] (--) NVIDIA(0):     DFP-0
[     7.201] (--) NVIDIA(0):     DFP-1
[     7.201] (--) NVIDIA(0):     DFP-2
[     7.201] (--) NVIDIA(0):     DFP-3
[     7.201] (--) NVIDIA(0):     DFP-4
[     7.201] (--) NVIDIA(0):     DFP-5
[     7.202] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 4090 Laptop GPU (AD103-A) at
[     7.202] (II) NVIDIA(0):     PCI:1:0:0 (GPU-0)
[     7.202] (--) NVIDIA(0): Memory: 16769024 kBytes
[     7.202] (--) NVIDIA(0): VideoBIOS: 95.03.2a.00.2a
[     7.202] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.202] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     7.202] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     7.202] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[     7.202] (--) NVIDIA(GPU-0): 
[     7.202] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     7.202] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[     7.202] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[     7.202] (--) NVIDIA(GPU-0): 
[     7.202] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     7.202] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[     7.202] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[     7.202] (--) NVIDIA(GPU-0): 
[     7.202] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     7.202] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[     7.202] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[     7.202] (--) NVIDIA(GPU-0): 
[     7.202] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     7.202] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     7.202] (--) NVIDIA(GPU-0): DFP-4: 2670.0 MHz maximum pixel clock
[     7.202] (--) NVIDIA(GPU-0): 
[     7.202] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     7.202] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[     7.202] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[     7.202] (--) NVIDIA(GPU-0): 
[     7.202] (==) NVIDIA(0): 
[     7.202] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     7.202] (==) NVIDIA(0):     will be used as the requested mode.
[     7.202] (==) NVIDIA(0): 
[     7.202] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[     7.202] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[     7.205] (II) NVIDIA(0): Validated MetaModes:
[     7.205] (II) NVIDIA(0):     "NULL"
[     7.205] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     7.205] (**) NVIDIA(0): DPI set to (144, 144); computed from "DPI" X config option
[     7.205] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[     7.205] (II) NVIDIA:     access.
[     7.213] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     7.213] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     7.213] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     7.213] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     7.213] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     7.213] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     7.213] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     7.213] (II) NVIDIA(0):     Config Options in the README.
[     7.222] (II) NVIDIA(0): Setting mode "NULL"
[     7.230] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.230] (==) NVIDIA(0): Backing store enabled
[     7.230] (==) NVIDIA(0): Silken mouse enabled
[     7.230] (==) NVIDIA(0): DPMS enabled
[     7.231] (II) Loading sub module "dri2"
[     7.231] (II) LoadModule: "dri2"
[     7.231] (II) Module "dri2" already built-in
[     7.231] (II) NVIDIA(0): [DRI2] Setup complete
[     7.231] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.231] (II) Initializing extension Generic Event Extension
[     7.231] (II) Initializing extension SHAPE
[     7.231] (II) Initializing extension MIT-SHM
[     7.231] (II) Initializing extension XInputExtension
[     7.231] (II) Initializing extension XTEST
[     7.231] (II) Initializing extension BIG-REQUESTS
[     7.231] (II) Initializing extension SYNC
[     7.231] (II) Initializing extension XKEYBOARD
[     7.231] (II) Initializing extension XC-MISC
[     7.231] (II) Initializing extension SECURITY
[     7.231] (II) Initializing extension XFIXES
[     7.231] (II) Initializing extension RENDER
[     7.231] (II) Initializing extension RANDR
[     7.231] (II) Initializing extension COMPOSITE
[     7.231] (II) Initializing extension DAMAGE
[     7.231] (II) Initializing extension MIT-SCREEN-SAVER
[     7.231] (II) Initializing extension DOUBLE-BUFFER
[     7.231] (II) Initializing extension RECORD
[     7.231] (II) Initializing extension DPMS
[     7.231] (II) Initializing extension Present
[     7.231] (II) Initializing extension DRI3
[     7.231] (II) Initializing extension X-Resource
[     7.231] (II) Initializing extension XVideo
[     7.231] (II) Initializing extension XVideo-MotionCompensation
[     7.231] (II) Initializing extension GLX
[     7.231] (II) Initializing extension GLX
[     7.231] (II) Indirect GLX disabled.
[     7.231] (II) GLX: Another vendor is already registered for screen 0
[     7.231] (II) Initializing extension XFree86-VidModeExtension
[     7.231] (II) Initializing extension XFree86-DGA
[     7.232] (II) Initializing extension XFree86-DRI
[     7.232] (II) Initializing extension DRI2
[     7.232] (II) Initializing extension NV-GLX
[     7.232] (II) Initializing extension NV-CONTROL
[     7.284] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     7.284] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     7.284] (II) LoadModule: "libinput"
[     7.284] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     7.285] (II) Module libinput: vendor="X.Org Foundation"
[     7.285] 	compiled for 1.21.1.3, module version = 1.2.1
[     7.285] 	Module class: X.Org XInput Driver
[     7.285] 	ABI class: X.Org XInput driver, version 24.4
[     7.285] (II) Using input driver 'libinput' for 'Video Bus'
[     7.285] (**) Video Bus: always reports core events
[     7.285] (**) Option "Device" "/dev/input/event7"
[     7.289] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[     7.289] (II) event7  - Video Bus: device is a keyboard
[     7.289] (II) event7  - Video Bus: device removed
[     7.332] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18/event7"
[     7.332] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[     7.333] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[     7.333] (II) event7  - Video Bus: device is a keyboard
[     7.333] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[     7.333] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     7.333] (II) Using input driver 'libinput' for 'Video Bus'
[     7.333] (**) Video Bus: always reports core events
[     7.333] (**) Option "Device" "/dev/input/event6"
[     7.333] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[     7.333] (II) event6  - Video Bus: device is a keyboard
[     7.333] (II) event6  - Video Bus: device removed
[     7.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input17/event6"
[     7.366] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     7.366] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[     7.366] (II) event6  - Video Bus: device is a keyboard
[     7.366] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     7.366] (II) No input driver specified, ignoring this device.
[     7.366] (II) This device may have been added with another device file.
[     7.366] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     7.366] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.366] (II) Using input driver 'libinput' for 'Power Button'
[     7.366] (**) Power Button: always reports core events
[     7.366] (**) Option "Device" "/dev/input/event2"
[     7.367] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.367] (II) event2  - Power Button: device is a keyboard
[     7.367] (II) event2  - Power Button: device removed
[     7.382] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[     7.382] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     7.383] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.383] (II) event2  - Power Button: device is a keyboard
[     7.383] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     7.383] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     7.383] (II) Using input driver 'libinput' for 'Sleep Button'
[     7.383] (**) Sleep Button: always reports core events
[     7.383] (**) Option "Device" "/dev/input/event1"
[     7.383] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     7.383] (II) event1  - Sleep Button: device is a keyboard
[     7.383] (II) event1  - Sleep Button: device removed
[     7.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     7.399] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     7.399] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     7.399] (II) event1  - Sleep Button: device is a keyboard
[     7.400] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[     7.400] (II) No input driver specified, ignoring this device.
[     7.400] (II) This device may have been added with another device file.
[     7.400] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[     7.400] (II) No input driver specified, ignoring this device.
[     7.400] (II) This device may have been added with another device file.
[     7.400] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[     7.400] (II) No input driver specified, ignoring this device.
[     7.400] (II) This device may have been added with another device file.
[     7.400] (II) config/udev: Adding input device SteelSeries SteelSeries KLC (/dev/input/event4)
[     7.400] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[     7.400] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[     7.400] (**) SteelSeries SteelSeries KLC: always reports core events
[     7.400] (**) Option "Device" "/dev/input/event4"
[     7.401] (II) event4  - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[     7.401] (II) event4  - SteelSeries SteelSeries KLC: device is a keyboard
[     7.401] (II) event4  - SteelSeries SteelSeries KLC: device removed
[     7.416] (II) libinput: SteelSeries SteelSeries KLC: needs a virtual subdevice
[     7.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.1/0003:1038:113A.0005/input/input10/event4"
[     7.416] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: MOUSE, id 10)
[     7.416] (**) Option "AccelerationScheme" "none"
[     7.416] (**) SteelSeries SteelSeries KLC: (accel) selected scheme none/0
[     7.416] (**) SteelSeries SteelSeries KLC: (accel) acceleration factor: 2.000
[     7.416] (**) SteelSeries SteelSeries KLC: (accel) acceleration threshold: 4
[     7.416] (II) event4  - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[     7.416] (II) event4  - SteelSeries SteelSeries KLC: device is a keyboard
[     7.417] (II) config/udev: Adding input device SteelSeries SteelSeries ALC (/dev/input/event5)
[     7.417] (**) SteelSeries SteelSeries ALC: Applying InputClass "libinput keyboard catchall"
[     7.417] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries ALC'
[     7.417] (**) SteelSeries SteelSeries ALC: always reports core events
[     7.417] (**) Option "Device" "/dev/input/event5"
[     7.417] (II) event5  - SteelSeries SteelSeries ALC: is tagged by udev as: Keyboard
[     7.417] (II) event5  - SteelSeries SteelSeries ALC: device is a keyboard
[     7.417] (II) event5  - SteelSeries SteelSeries ALC: device removed
[     7.446] (II) libinput: SteelSeries SteelSeries ALC: needs a virtual subdevice
[     7.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.1/0003:1038:114D.0008/input/input16/event5"
[     7.446] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries ALC" (type: MOUSE, id 11)
[     7.446] (**) Option "AccelerationScheme" "none"
[     7.446] (**) SteelSeries SteelSeries ALC: (accel) selected scheme none/0
[     7.446] (**) SteelSeries SteelSeries ALC: (accel) acceleration factor: 2.000
[     7.446] (**) SteelSeries SteelSeries ALC: (accel) acceleration threshold: 4
[     7.446] (II) event5  - SteelSeries SteelSeries ALC: is tagged by udev as: Keyboard
[     7.446] (II) event5  - SteelSeries SteelSeries ALC: device is a keyboard
[     7.447] (II) config/udev: Adding input device FHD Camera: FHD Camera (/dev/input/event15)
[     7.447] (**) FHD Camera: FHD Camera: Applying InputClass "libinput keyboard catchall"
[     7.447] (II) Using input driver 'libinput' for 'FHD Camera: FHD Camera'
[     7.447] (**) FHD Camera: FHD Camera: always reports core events
[     7.447] (**) Option "Device" "/dev/input/event15"
[     7.447] (II) event15 - FHD Camera: FHD Camera: is tagged by udev as: Keyboard
[     7.447] (II) event15 - FHD Camera: FHD Camera: device is a keyboard
[     7.447] (II) event15 - FHD Camera: FHD Camera: device removed
[     7.486] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input32/event15"
[     7.486] (II) XINPUT: Adding extended input device "FHD Camera: FHD Camera" (type: KEYBOARD, id 12)
[     7.486] (II) event15 - FHD Camera: FHD Camera: is tagged by udev as: Keyboard
[     7.486] (II) event15 - FHD Camera: FHD Camera: device is a keyboard
[     7.486] (II) config/udev: Adding input device FHD Camera: FHD IR Camera (/dev/input/event20)
[     7.486] (**) FHD Camera: FHD IR Camera: Applying InputClass "libinput keyboard catchall"
[     7.486] (II) Using input driver 'libinput' for 'FHD Camera: FHD IR Camera'
[     7.486] (**) FHD Camera: FHD IR Camera: always reports core events
[     7.486] (**) Option "Device" "/dev/input/event20"
[     7.487] (II) event20 - FHD Camera: FHD IR Camera: is tagged by udev as: Keyboard
[     7.487] (II) event20 - FHD Camera: FHD IR Camera: device is a keyboard
[     7.487] (II) event20 - FHD Camera: FHD IR Camera: device removed
[     7.526] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.2/input/input36/event20"
[     7.526] (II) XINPUT: Adding extended input device "FHD Camera: FHD IR Camera" (type: KEYBOARD, id 13)
[     7.526] (II) event20 - FHD Camera: FHD IR Camera: is tagged by udev as: Keyboard
[     7.526] (II) event20 - FHD Camera: FHD IR Camera: device is a keyboard
[     7.527] (II) config/udev: Adding input device Logitech G900 (/dev/input/event8)
[     7.527] (**) Logitech G900: Applying InputClass "libinput pointer catchall"
[     7.527] (**) Logitech G900: Applying InputClass "libinput keyboard catchall"
[     7.527] (II) Using input driver 'libinput' for 'Logitech G900'
[     7.527] (**) Logitech G900: always reports core events
[     7.527] (**) Option "Device" "/dev/input/event8"
[     7.527] (II) event8  - Logitech G900: is tagged by udev as: Keyboard Mouse
[     7.527] (II) event8  - Logitech G900: device is a pointer
[     7.527] (II) event8  - Logitech G900: device is a keyboard
[     7.527] (II) event8  - Logitech G900: device removed
[     7.542] (II) libinput: Logitech G900: needs a virtual subdevice
[     7.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C539.0003/0003:046D:4053.0006/input/input19/event8"
[     7.542] (II) XINPUT: Adding extended input device "Logitech G900" (type: MOUSE, id 14)
[     7.543] (**) Option "AccelerationScheme" "none"
[     7.543] (**) Logitech G900: (accel) selected scheme none/0
[     7.543] (**) Logitech G900: (accel) acceleration factor: 2.000
[     7.543] (**) Logitech G900: (accel) acceleration threshold: 4
[     7.543] (II) event8  - Logitech G900: is tagged by udev as: Keyboard Mouse
[     7.543] (II) event8  - Logitech G900: device is a pointer
[     7.543] (II) event8  - Logitech G900: device is a keyboard
[     7.543] (II) config/udev: Adding input device Logitech G900 (/dev/input/mouse0)
[     7.543] (II) No input driver specified, ignoring this device.
[     7.543] (II) This device may have been added with another device file.
[     7.543] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Mouse (/dev/input/event18)
[     7.543] (**) ELAN0305:00 04F3:31FD Mouse: Applying InputClass "libinput pointer catchall"
[     7.543] (II) Using input driver 'libinput' for 'ELAN0305:00 04F3:31FD Mouse'
[     7.543] (**) ELAN0305:00 04F3:31FD Mouse: always reports core events
[     7.543] (**) Option "Device" "/dev/input/event18"
[     7.544] (II) event18 - ELAN0305:00 04F3:31FD Mouse: is tagged by udev as: Mouse Pointingstick
[     7.544] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device is a pointer
[     7.544] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device removed
[     7.592] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-18/i2c-ELAN0305:00/0018:04F3:31FD.0009/input/input33/event18"
[     7.592] (II) XINPUT: Adding extended input device "ELAN0305:00 04F3:31FD Mouse" (type: MOUSE, id 15)
[     7.593] (**) Option "AccelerationScheme" "none"
[     7.593] (**) ELAN0305:00 04F3:31FD Mouse: (accel) selected scheme none/0
[     7.593] (**) ELAN0305:00 04F3:31FD Mouse: (accel) acceleration factor: 2.000
[     7.593] (**) ELAN0305:00 04F3:31FD Mouse: (accel) acceleration threshold: 4
[     7.593] (II) event18 - ELAN0305:00 04F3:31FD Mouse: is tagged by udev as: Mouse Pointingstick
[     7.593] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device is a pointer
[     7.593] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Mouse (/dev/input/mouse1)
[     7.593] (II) No input driver specified, ignoring this device.
[     7.593] (II) This device may have been added with another device file.
[     7.594] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Touchpad (/dev/input/event19)
[     7.594] (**) ELAN0305:00 04F3:31FD Touchpad: Applying InputClass "libinput touchpad catchall"
[     7.594] (II) Using input driver 'libinput' for 'ELAN0305:00 04F3:31FD Touchpad'
[     7.594] (**) ELAN0305:00 04F3:31FD Touchpad: always reports core events
[     7.594] (**) Option "Device" "/dev/input/event19"
[     7.594] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: is tagged by udev as: Touchpad
[     7.594] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device is a touchpad
[     7.594] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device removed
[     7.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-18/i2c-ELAN0305:00/0018:04F3:31FD.0009/input/input35/event19"
[     7.646] (II) XINPUT: Adding extended input device "ELAN0305:00 04F3:31FD Touchpad" (type: TOUCHPAD, id 16)
[     7.646] (**) Option "AccelerationScheme" "none"
[     7.646] (**) ELAN0305:00 04F3:31FD Touchpad: (accel) selected scheme none/0
[     7.646] (**) ELAN0305:00 04F3:31FD Touchpad: (accel) acceleration factor: 2.000
[     7.646] (**) ELAN0305:00 04F3:31FD Touchpad: (accel) acceleration threshold: 4
[     7.647] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: is tagged by udev as: Touchpad
[     7.647] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device is a touchpad
[     7.648] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Touchpad (/dev/input/mouse2)
[     7.648] (II) No input driver specified, ignoring this device.
[     7.648] (II) This device may have been added with another device file.
[     7.648] (II) config/udev: Adding input device gpio-keys (/dev/input/event12)
[     7.648] (II) No input driver specified, ignoring this device.
[     7.648] (II) This device may have been added with another device file.
[     7.648] (II) config/udev: Adding input device Intel HID events (/dev/input/event9)
[     7.648] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     7.648] (II) Using input driver 'libinput' for 'Intel HID events'
[     7.648] (**) Intel HID events: always reports core events
[     7.648] (**) Option "Device" "/dev/input/event9"
[     7.648] (II) event9  - Intel HID events: is tagged by udev as: Keyboard
[     7.648] (II) event9  - Intel HID events: device is a keyboard
[     7.648] (II) event9  - Intel HID events: device removed
[     7.666] (**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input20/event9"
[     7.666] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 17)
[     7.666] (II) event9  - Intel HID events: is tagged by udev as: Keyboard
[     7.666] (II) event9  - Intel HID events: device is a keyboard
[     7.666] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event11)
[     7.666] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[     7.666] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[     7.666] (**) Intel HID 5 button array: always reports core events
[     7.666] (**) Option "Device" "/dev/input/event11"
[     7.667] (II) event11 - Intel HID 5 button array: is tagged by udev as: Keyboard
[     7.667] (II) event11 - Intel HID 5 button array: device is a keyboard
[     7.667] (II) event11 - Intel HID 5 button array: device removed
[     7.683] (**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input23/event11"
[     7.683] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 18)
[     7.683] (II) event11 - Intel HID 5 button array: is tagged by udev as: Keyboard
[     7.683] (II) event11 - Intel HID 5 button array: device is a keyboard
[     7.683] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     7.683] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     7.683] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     7.683] (**) AT Translated Set 2 keyboard: always reports core events
[     7.683] (**) Option "Device" "/dev/input/event3"
[     7.683] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.683] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     7.684] (II) event3  - AT Translated Set 2 keyboard: device removed
[     7.709] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     7.709] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19)
[     7.710] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.710] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     7.711] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[     7.711] (II) No input driver specified, ignoring this device.
[     7.711] (II) This device may have been added with another device file.
[     7.712] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event13)
[     7.712] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.712] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[     7.712] (**) MSI WMI hotkeys: always reports core events
[     7.712] (**) Option "Device" "/dev/input/event13"
[     7.712] (II) event13 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[     7.712] (II) event13 - MSI WMI hotkeys: device is a keyboard
[     7.713] (II) event13 - MSI WMI hotkeys: device removed
[     7.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event13"
[     7.752] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 20)
[     7.753] (II) event13 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[     7.753] (II) event13 - MSI WMI hotkeys: device is a keyboard
[     7.755] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[     7.755] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[     7.755] (**) SteelSeries SteelSeries KLC: always reports core events
[     7.755] (**) Option "Device" "/dev/input/event4"
[     7.755] (II) libinput: SteelSeries SteelSeries KLC: is a virtual subdevice
[     7.755] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.1/0003:1038:113A.0005/input/input10/event4"
[     7.755] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: KEYBOARD, id 21)
[     7.755] (**) SteelSeries SteelSeries ALC: Applying InputClass "libinput keyboard catchall"
[     7.755] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries ALC'
[     7.755] (**) SteelSeries SteelSeries ALC: always reports core events
[     7.755] (**) Option "Device" "/dev/input/event5"
[     7.755] (II) libinput: SteelSeries SteelSeries ALC: is a virtual subdevice
[     7.755] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.1/0003:1038:114D.0008/input/input16/event5"
[     7.755] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries ALC" (type: KEYBOARD, id 22)
[     7.755] (**) Logitech G900: Applying InputClass "libinput pointer catchall"
[     7.755] (**) Logitech G900: Applying InputClass "libinput keyboard catchall"
[     7.755] (II) Using input driver 'libinput' for 'Logitech G900'
[     7.755] (**) Logitech G900: always reports core events
[     7.755] (**) Option "Device" "/dev/input/event8"
[     7.755] (II) libinput: Logitech G900: is a virtual subdevice
[     7.755] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C539.0003/0003:046D:4053.0006/input/input19/event8"
[     7.755] (II) XINPUT: Adding extended input device "Logitech G900" (type: KEYBOARD, id 23)
[     7.870] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse3)
[     7.870] (II) No input driver specified, ignoring this device.
[     7.870] (II) This device may have been added with another device file.
[     8.026] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event21)
[     8.026] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[     8.026] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[     8.026] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.026] (**) Option "Device" "/dev/input/event21"
[     8.026] (II) event21 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[     8.027] (II) event21 - ETPS/2 Elantech Touchpad: device is a touchpad
[     8.027] (II) event21 - ETPS/2 Elantech Touchpad: device removed
[     8.069] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input22/event21"
[     8.069] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 24)
[     8.070] (**) Option "AccelerationScheme" "none"
[     8.070] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[     8.070] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     8.070] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     8.070] (II) event21 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[     8.070] (II) event21 - ETPS/2 Elantech Touchpad: device is a touchpad
[   160.660] (II) event7  - Video Bus: device removed
[   160.716] (II) event6  - Video Bus: device removed
[   160.769] (II) event2  - Power Button: device removed
[   160.799] (II) event1  - Sleep Button: device removed
[   160.829] (II) event15 - FHD Camera: FHD Camera: device removed
[   160.899] (II) event20 - FHD Camera: FHD IR Camera: device removed
[   160.946] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device removed
[   161.009] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device removed
[   161.056] (II) event9  - Intel HID events: device removed
[   161.089] (II) event11 - Intel HID 5 button array: device removed
[   161.113] (II) event3  - AT Translated Set 2 keyboard: device removed
[   161.149] (II) event13 - MSI WMI hotkeys: device removed
[   161.223] (II) event4  - SteelSeries SteelSeries KLC: device removed
[   161.269] (II) event5  - SteelSeries SteelSeries ALC: device removed
[   161.299] (II) event8  - Logitech G900: device removed
[   161.323] (II) event21 - ETPS/2 Elantech Touchpad: device removed
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.368] (II) UnloadModule: "libinput"
[   161.369] (II) UnloadModule: "libinput"
[   161.369] (II) UnloadModule: "libinput"
[   161.369] (II) UnloadModule: "libinput"
[   161.370] (II) UnloadModule: "libinput"
[   161.429] (II) NVIDIA(GPU-0): Deleting GPU-0
[   161.445] (II) Server terminated successfully (0). Closing log file.

Last edited by Zibi1981 (2023-03-05 15:18:03)

seth · 2023-03-05 15:25:24

The only thing I can do is turn the power off.

Switch to another VT? (ctrl+alt+f3)

accesed from Windows

3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.

[     7.154] (==) Using config file: "/etc/X11/xorg.conf"

Get rid of that file. Don't use nvidia-settings/xonfig to generate a config file, especially not on a hybrid system and in general static server configs are a bad idea and actively discouraged.

Zibi1981 · 2023-03-05 16:00:36

Thanks seth for your contribution.

You were right - SDDM and Plasama are starting after I've removed xorg.conf file. Unfortunately after login into the KDE, my keyboard is not working and my mouse also acts weirdly - i.e. I cannot select any entry with a left-click. Strangely enought both - the keyboard and mouse - seem to work well while I'm typing my credentials to SDDM. Is this because I've removed xorg.conf whcih contained some configuration for mouse and keyboard?

P.S. I always turn off hibernation and fast start in Windows.

Last edited by Zibi1981 (2023-03-05 16:01:57)

seth · 2023-03-05 16:19:59

Is this because I've removed xorg.conf whcih contained some configuration for mouse and keyboard?

Rather not. Especially since nvidia-settings add input devices w/ drivers which haven't existed in over a decade…

Does the mouse cursor move?
Can you switch to a VT w/ ctrl+alt+F3 ?

I cannot select any entry with a left-click

Select an entry where? What can you do w/ the mouse?

Zibi1981 · 2023-03-05 16:33:38

Yes, I can move the mouse cursor, but when I click KDE menu (the left-click works), I cannot select anything within the menu. Neither I can type anything within the menu.

seth · 2023-03-05 16:54:32

So for all we know the KDE "menu" is broken.
Can you launch some other process and interact with that?

Trilby · 2023-03-05 17:02:33

And this is indeed why that line is there. If you test a simple Xorg setup, you can confirm whether or not graphics drivers, input, and other general factors are working. When you install a huge DE and DM and something goes wrong, it is much harder to know if the problem is xorg, drivers, hardware, DM, DE, applications (e.g., the menu itself), etc.

If I were you, I'd go back and test a simple WM (e.g., twm with an xterm or three) and see if everything works there - though the recommendation above should acheive the same goal - I just prefer to eliminate extraneous variables: e.g., if the "other process" also fails, it still may not be an Xorg/driver level issue but could just be a KDE-specific issue in a library shared between the menu and the"other process" or even the KDE WM itself getting in the way somehow.

Last edited by Trilby (2023-03-05 17:02:59)

Zibi1981 · 2023-03-05 17:12:08

seth wrote:

So for all we know the KDE "menu" is broken.
Can you launch some other process and interact with that?

I dug a little bit more into this issue, and it seems to me it could be related to window manager itself. Why I think so?

1. When I login I cannot see any wallpaper, the mouse and keyboard behave like I described above.

2. When I switch to a different console, and the revert back to the desktop on tty1 for few seconds mouse and keyboard are working properly and the generic KDE wallpaper can be seen. Sometimes I see some graphical glitches, then everything is as previously.

Drivers? Reinstalling both for Intel and nVidia didn't help.

seth · 2023-03-05 17:22:52

Compositor.
SHIFT+alt+F12 to toggle it and please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

Probably lose xf86-video-intel

Zibi1981 · 2023-03-05 18:10:11

Here it is:

[    63.603] (--) Log file renamed from "/var/log/Xorg.pid-3212.log" to "/var/log/Xorg.0.log"
[    63.604] 
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[    63.604] Current Operating System: Linux MSI-Arch 6.2.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 03 Mar 2023 15:58:31 +0000 x86_64
[    63.604] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fcef3735-b24e-d901-e0e0-3735b24ed901 rw ibt=off nvidia_drm.modeset=1 loglevel=3 quiet
[    63.604]  
[    63.604] Current version of pixman: 0.42.2
[    63.604] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    63.604] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    63.604] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar  5 19:05:33 2023
[    63.604] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    63.604] (==) No Layout section.  Using the first Screen section.
[    63.604] (==) No screen section available. Using defaults.
[    63.604] (**) |-->Screen "Default Screen Section" (0)
[    63.604] (**) |   |-->Monitor "<default monitor>"
[    63.604] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    63.604] (==) Automatically adding devices
[    63.604] (==) Automatically enabling devices
[    63.604] (==) Automatically adding GPU devices
[    63.604] (==) Automatically binding GPU devices
[    63.604] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    63.604] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    63.604] 	Entry deleted from font path.
[    63.604] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    63.604] 	Entry deleted from font path.
[    63.604] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    63.604] (==) ModulePath set to "/usr/lib/xorg/modules"
[    63.604] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    63.604] (II) Module ABI versions:
[    63.604] 	X.Org ANSI C Emulation: 0.4
[    63.604] 	X.Org Video Driver: 25.2
[    63.604] 	X.Org XInput driver : 24.4
[    63.604] 	X.Org Server Extension : 10.0
[    63.604] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.NoReply (Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
[    63.604] (++) using VT number 1

[    63.604] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    63.605] (II) xfree86: Adding drm device (/dev/dri/card0)
[    63.605] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    63.636] (II) xfree86: Adding drm device (/dev/dri/card1)
[    63.636] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    63.638] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    63.638] (--) PCI:*(0@0:2:0) 8086:a788:1462:13cd rev 4, Mem @ 0x6433000000/16777216, 0x4000000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    63.638] (--) PCI: (1@0:0:0) 10de:2717:1462:13cd rev 161, Mem @ 0x5b000000/16777216, 0x6000000000/17179869184, 0x6400000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[    63.638] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    63.638] (II) LoadModule: "glx"
[    63.638] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    63.639] (II) Module glx: vendor="X.Org Foundation"
[    63.639] 	compiled for 1.21.1.7, module version = 1.0.0
[    63.639] 	ABI class: X.Org Server Extension, version 10.0
[    63.639] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    63.639] 	loading driver: nvidia
[    63.639] (==) Matched intel as autoconfigured driver 0
[    63.639] (==) Matched nvidia as autoconfigured driver 1
[    63.639] (==) Matched nouveau as autoconfigured driver 2
[    63.639] (==) Matched nv as autoconfigured driver 3
[    63.639] (==) Matched modesetting as autoconfigured driver 4
[    63.639] (==) Matched fbdev as autoconfigured driver 5
[    63.639] (==) Matched vesa as autoconfigured driver 6
[    63.639] (==) Assigned the driver to the xf86ConfigLayout
[    63.639] (II) LoadModule: "intel"
[    63.639] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    63.639] (II) Module intel: vendor="X.Org Foundation"
[    63.639] 	compiled for 1.21.1.6, module version = 2.99.917
[    63.639] 	Module class: X.Org Video Driver
[    63.639] 	ABI class: X.Org Video Driver, version 25.2
[    63.639] (II) LoadModule: "nvidia"
[    63.639] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    63.639] (II) Module nvidia: vendor="NVIDIA Corporation"
[    63.639] 	compiled for 1.6.99.901, module version = 1.0.0
[    63.639] 	Module class: X.Org Video Driver
[    63.639] (II) LoadModule: "nouveau"
[    63.639] (WW) Warning, couldn't open module nouveau
[    63.639] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    63.639] (II) LoadModule: "nv"
[    63.639] (WW) Warning, couldn't open module nv
[    63.639] (EE) Failed to load module "nv" (module does not exist, 0)
[    63.639] (II) LoadModule: "modesetting"
[    63.639] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    63.639] (II) Module modesetting: vendor="X.Org Foundation"
[    63.639] 	compiled for 1.21.1.7, module version = 1.21.1
[    63.639] 	Module class: X.Org Video Driver
[    63.639] 	ABI class: X.Org Video Driver, version 25.2
[    63.639] (II) LoadModule: "fbdev"
[    63.639] (WW) Warning, couldn't open module fbdev
[    63.639] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    63.639] (II) LoadModule: "vesa"
[    63.639] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    63.639] (II) Module vesa: vendor="X.Org Foundation"
[    63.639] 	compiled for 1.21.1.4, module version = 2.6.0
[    63.639] 	Module class: X.Org Video Driver
[    63.639] 	ABI class: X.Org Video Driver, version 25.2
[    63.639] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    63.639] (II) intel: Driver for Intel(R) HD Graphics
[    63.639] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    63.639] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    63.639] (II) NVIDIA dlloader X Driver  525.89.02  Wed Feb  1 23:14:37 UTC 2023
[    63.639] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    63.639] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    63.639] (II) VESA: driver for VESA chipsets: vesa
[    63.639] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[    63.639] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[    63.640] (WW) Falling back to old probe method for modesetting
[    63.665] (II) Loading sub module "fb"
[    63.665] (II) LoadModule: "fb"
[    63.665] (II) Module "fb" already built-in
[    63.665] (II) Loading sub module "wfb"
[    63.665] (II) LoadModule: "wfb"
[    63.665] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    63.665] (II) Module wfb: vendor="X.Org Foundation"
[    63.665] 	compiled for 1.21.1.7, module version = 1.0.0
[    63.665] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    63.665] (II) Loading sub module "ramdac"
[    63.665] (II) LoadModule: "ramdac"
[    63.665] (II) Module "ramdac" already built-in
[    63.665] (WW) intel(0): Unknown chipset
[    63.665] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 8 threads
[    63.665] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    63.665] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    63.665] (==) intel(0): RGB weight 888
[    63.665] (==) intel(0): Default visual is TrueColor
[    63.666] (II) intel(0): Output eDP2 has no monitor section
[    63.666] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP2
[    63.666] (II) intel(0): Enabled output eDP2
[    63.666] (II) intel(0): Output DP3 has no monitor section
[    63.666] (II) intel(0): Enabled output DP3
[    63.666] (II) intel(0): Output HDMI2 has no monitor section
[    63.666] (II) intel(0): Enabled output HDMI2
[    63.666] (II) intel(0): Output DP4 has no monitor section
[    63.666] (II) intel(0): Enabled output DP4
[    63.666] (II) intel(0): Output HDMI3 has no monitor section
[    63.666] (II) intel(0): Enabled output HDMI3
[    63.666] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    63.666] (II) intel(0): Output VIRTUAL1 has no monitor section
[    63.666] (II) intel(0): Enabled output VIRTUAL1
[    63.666] (--) intel(0): Output eDP2 using initial mode 2560x1600 on pipe 0
[    63.666] (==) intel(0): TearFree enabled
[    63.666] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    63.666] (==) intel(0): DPI set to (96, 96)
[    63.666] (II) Loading sub module "dri3"
[    63.666] (II) LoadModule: "dri3"
[    63.666] (II) Module "dri3" already built-in
[    63.666] (II) Loading sub module "dri2"
[    63.666] (II) LoadModule: "dri2"
[    63.666] (II) Module "dri2" already built-in
[    63.666] (II) Loading sub module "present"
[    63.666] (II) LoadModule: "present"
[    63.666] (II) Module "present" already built-in
[    63.666] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    63.666] (==) NVIDIA(G0): RGB weight 888
[    63.666] (==) NVIDIA(G0): Default visual is TrueColor
[    63.666] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    63.666] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    63.666] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[    63.666] (**) NVIDIA(G0): Enabling 2D acceleration
[    63.666] (II) Loading sub module "glxserver_nvidia"
[    63.666] (II) LoadModule: "glxserver_nvidia"
[    63.666] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    63.672] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    63.672] 	compiled for 1.6.99.901, module version = 1.0.0
[    63.672] 	Module class: X.Org Server Extension
[    63.672] (II) NVIDIA GLX Module  525.89.02  Wed Feb  1 23:13:01 UTC 2023
[    63.672] (II) NVIDIA: The X server supports PRIME Render Offload.
[    63.672] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    63.672] (--) NVIDIA(0):     DFP-0
[    63.672] (--) NVIDIA(0):     DFP-1
[    63.672] (--) NVIDIA(0):     DFP-2
[    63.672] (--) NVIDIA(0):     DFP-3
[    63.672] (--) NVIDIA(0):     DFP-4
[    63.672] (--) NVIDIA(0):     DFP-5
[    63.673] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce RTX 4090 Laptop GPU (AD103-A) at
[    63.673] (II) NVIDIA(G0):     PCI:1:0:0 (GPU-0)
[    63.673] (--) NVIDIA(G0): Memory: 16769024 kBytes
[    63.673] (--) NVIDIA(G0): VideoBIOS: 95.03.2a.00.2a
[    63.673] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[    63.673] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    63.673] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    63.673] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[    63.673] (--) NVIDIA(GPU-0): 
[    63.673] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    63.673] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    63.673] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[    63.673] (--) NVIDIA(GPU-0): 
[    63.673] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    63.673] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    63.673] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    63.673] (--) NVIDIA(GPU-0): 
[    63.673] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    63.673] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    63.673] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    63.673] (--) NVIDIA(GPU-0): 
[    63.673] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    63.673] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    63.673] (--) NVIDIA(GPU-0): DFP-4: 2670.0 MHz maximum pixel clock
[    63.673] (--) NVIDIA(GPU-0): 
[    63.673] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    63.673] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    63.673] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[    63.673] (--) NVIDIA(GPU-0): 
[    63.676] (II) NVIDIA(G0): Validated MetaModes:
[    63.676] (II) NVIDIA(G0):     "NULL"
[    63.676] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[    63.676] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[    63.676] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[    63.676] (II) UnloadModule: "modesetting"
[    63.676] (II) Unloading modesetting
[    63.676] (II) UnloadModule: "vesa"
[    63.676] (II) Unloading vesa
[    63.676] (II) intel(0): SNA initialized with generic backend
[    63.676] (==) intel(0): Backing store enabled
[    63.676] (==) intel(0): Silken mouse enabled
[    63.676] (II) intel(0): HW Cursor enabled
[    63.676] (==) intel(0): DPMS enabled
[    63.676] (==) intel(0): Display hotplug detection enabled
[    63.676] (II) intel(0): Textured video not supported on this hardware or backend
[    63.676] (II) intel(0): [DRI2] Setup complete
[    63.676] (II) intel(0): [DRI2]   DRI driver: i965
[    63.676] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    63.676] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    63.676] (II) intel(0): hardware support for Present enabled
[    63.676] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    63.676] (II) NVIDIA:     access.
[    63.684] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    63.684] (II) NVIDIA(G0):     may not be running or the "AcpidSocketPath" X
[    63.684] (II) NVIDIA(G0):     configuration option may not be set correctly.  When the
[    63.684] (II) NVIDIA(G0):     ACPI event daemon is available, the NVIDIA X driver will
[    63.684] (II) NVIDIA(G0):     try to use it to receive ACPI event notifications.  For
[    63.684] (II) NVIDIA(G0):     details, please see the "ConnectToAcpid" and
[    63.684] (II) NVIDIA(G0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    63.684] (II) NVIDIA(G0):     Config Options in the README.
[    63.694] (II) NVIDIA(G0): Setting mode "NULL"
[    63.702] (==) NVIDIA(G0): Disabling shared memory pixmaps
[    63.702] (==) NVIDIA(G0): Backing store enabled
[    63.702] (==) NVIDIA(G0): Silken mouse enabled
[    63.702] (==) NVIDIA(G0): DPMS enabled
[    63.702] (II) Loading sub module "dri2"
[    63.702] (II) LoadModule: "dri2"
[    63.702] (II) Module "dri2" already built-in
[    63.702] (II) NVIDIA(G0): [DRI2] Setup complete
[    63.702] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia
[    63.702] (II) Initializing extension Generic Event Extension
[    63.702] (II) Initializing extension SHAPE
[    63.702] (II) Initializing extension MIT-SHM
[    63.702] (II) Initializing extension XInputExtension
[    63.702] (II) Initializing extension XTEST
[    63.702] (II) Initializing extension BIG-REQUESTS
[    63.703] (II) Initializing extension SYNC
[    63.703] (II) Initializing extension XKEYBOARD
[    63.703] (II) Initializing extension XC-MISC
[    63.703] (II) Initializing extension SECURITY
[    63.703] (II) Initializing extension XFIXES
[    63.703] (II) Initializing extension RENDER
[    63.703] (II) Initializing extension RANDR
[    63.703] (II) Initializing extension COMPOSITE
[    63.703] (II) Initializing extension DAMAGE
[    63.703] (II) Initializing extension MIT-SCREEN-SAVER
[    63.703] (II) Initializing extension DOUBLE-BUFFER
[    63.703] (II) Initializing extension RECORD
[    63.703] (II) Initializing extension DPMS
[    63.703] (II) Initializing extension Present
[    63.703] (II) Initializing extension DRI3
[    63.703] (II) Initializing extension X-Resource
[    63.703] (II) Initializing extension XVideo
[    63.703] (II) Initializing extension XVideo-MotionCompensation
[    63.703] (II) Initializing extension GLX
[    63.703] (II) Initializing extension GLX
[    63.703] (II) Indirect GLX disabled.
[    63.703] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[    63.703] (EE) AIGLX error: unable to load driver i965
[    63.713] (II) IGLX: Loaded and initialized swrast
[    63.713] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    63.713] (II) Initializing extension XFree86-VidModeExtension
[    63.713] (II) Initializing extension XFree86-DGA
[    63.713] (II) Initializing extension XFree86-DRI
[    63.713] (II) Initializing extension DRI2
[    63.714] (II) Initializing extension NV-GLX
[    63.714] (II) Initializing extension NV-CONTROL
[    63.716] (EE) intel(0): Failed to submit rendering commands (Invalid argument), disabling acceleration.
[    63.716] (II) intel(0): switch to mode 2560x1600@240.0 on eDP2 using pipe 0, position (0, 0), rotation normal, reflection none
[    63.716] (II) intel(0): Setting screen physical size to 677 x 423
[    63.741] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    63.741] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    63.741] (II) LoadModule: "libinput"
[    63.741] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    63.741] (II) Module libinput: vendor="X.Org Foundation"
[    63.741] 	compiled for 1.21.1.3, module version = 1.2.1
[    63.741] 	Module class: X.Org XInput Driver
[    63.741] 	ABI class: X.Org XInput driver, version 24.4
[    63.741] (II) Using input driver 'libinput' for 'Video Bus'
[    63.741] (**) Video Bus: always reports core events
[    63.741] (**) Option "Device" "/dev/input/event7"
[    63.742] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    63.742] (II) event7  - Video Bus: device is a keyboard
[    63.742] (II) event7  - Video Bus: device removed
[    63.786] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18/event7"
[    63.786] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    63.788] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    63.788] (II) event7  - Video Bus: device is a keyboard
[    63.789] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    63.789] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    63.789] (II) Using input driver 'libinput' for 'Video Bus'
[    63.789] (**) Video Bus: always reports core events
[    63.789] (**) Option "Device" "/dev/input/event6"
[    63.791] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    63.791] (II) event6  - Video Bus: device is a keyboard
[    63.792] (II) event6  - Video Bus: device removed
[    63.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input17/event6"
[    63.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    63.831] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    63.832] (II) event6  - Video Bus: device is a keyboard
[    63.833] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    63.833] (II) No input driver specified, ignoring this device.
[    63.833] (II) This device may have been added with another device file.
[    63.834] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    63.834] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    63.834] (II) Using input driver 'libinput' for 'Power Button'
[    63.834] (**) Power Button: always reports core events
[    63.834] (**) Option "Device" "/dev/input/event2"
[    63.835] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    63.835] (II) event2  - Power Button: device is a keyboard
[    63.836] (II) event2  - Power Button: device removed
[    63.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    63.856] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    63.858] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    63.858] (II) event2  - Power Button: device is a keyboard
[    63.859] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    63.859] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    63.859] (II) Using input driver 'libinput' for 'Sleep Button'
[    63.859] (**) Sleep Button: always reports core events
[    63.859] (**) Option "Device" "/dev/input/event1"
[    63.860] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    63.861] (II) event1  - Sleep Button: device is a keyboard
[    63.861] (II) event1  - Sleep Button: device removed
[    63.883] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    63.883] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    63.884] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    63.885] (II) event1  - Sleep Button: device is a keyboard
[    63.886] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[    63.886] (II) No input driver specified, ignoring this device.
[    63.886] (II) This device may have been added with another device file.
[    63.887] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[    63.887] (II) No input driver specified, ignoring this device.
[    63.887] (II) This device may have been added with another device file.
[    63.887] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[    63.888] (II) No input driver specified, ignoring this device.
[    63.888] (II) This device may have been added with another device file.
[    63.889] (II) config/udev: Adding input device SteelSeries SteelSeries KLC (/dev/input/event4)
[    63.889] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[    63.889] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[    63.889] (**) SteelSeries SteelSeries KLC: always reports core events
[    63.890] (**) Option "Device" "/dev/input/event4"
[    63.892] (II) event4  - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[    63.892] (II) event4  - SteelSeries SteelSeries KLC: device is a keyboard
[    63.893] (II) event4  - SteelSeries SteelSeries KLC: device removed
[    63.923] (II) libinput: SteelSeries SteelSeries KLC: needs a virtual subdevice
[    63.923] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.1/0003:1038:113A.0005/input/input10/event4"
[    63.923] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: MOUSE, id 10)
[    63.923] (**) Option "AccelerationScheme" "none"
[    63.923] (**) SteelSeries SteelSeries KLC: (accel) selected scheme none/0
[    63.923] (**) SteelSeries SteelSeries KLC: (accel) acceleration factor: 2.000
[    63.923] (**) SteelSeries SteelSeries KLC: (accel) acceleration threshold: 4
[    63.926] (II) event4  - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[    63.926] (II) event4  - SteelSeries SteelSeries KLC: device is a keyboard
[    63.928] (II) config/udev: Adding input device SteelSeries SteelSeries ALC (/dev/input/event5)
[    63.928] (**) SteelSeries SteelSeries ALC: Applying InputClass "libinput keyboard catchall"
[    63.928] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries ALC'
[    63.928] (**) SteelSeries SteelSeries ALC: always reports core events
[    63.928] (**) Option "Device" "/dev/input/event5"
[    63.930] (II) event5  - SteelSeries SteelSeries ALC: is tagged by udev as: Keyboard
[    63.930] (II) event5  - SteelSeries SteelSeries ALC: device is a keyboard
[    63.930] (II) event5  - SteelSeries SteelSeries ALC: device removed
[    63.949] (II) libinput: SteelSeries SteelSeries ALC: needs a virtual subdevice
[    63.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.1/0003:1038:114D.0008/input/input16/event5"
[    63.949] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries ALC" (type: MOUSE, id 11)
[    63.950] (**) Option "AccelerationScheme" "none"
[    63.950] (**) SteelSeries SteelSeries ALC: (accel) selected scheme none/0
[    63.950] (**) SteelSeries SteelSeries ALC: (accel) acceleration factor: 2.000
[    63.950] (**) SteelSeries SteelSeries ALC: (accel) acceleration threshold: 4
[    63.952] (II) event5  - SteelSeries SteelSeries ALC: is tagged by udev as: Keyboard
[    63.953] (II) event5  - SteelSeries SteelSeries ALC: device is a keyboard
[    63.954] (II) config/udev: Adding input device FHD Camera: FHD Camera (/dev/input/event14)
[    63.954] (**) FHD Camera: FHD Camera: Applying InputClass "libinput keyboard catchall"
[    63.954] (II) Using input driver 'libinput' for 'FHD Camera: FHD Camera'
[    63.954] (**) FHD Camera: FHD Camera: always reports core events
[    63.954] (**) Option "Device" "/dev/input/event14"
[    63.956] (II) event14 - FHD Camera: FHD Camera: is tagged by udev as: Keyboard
[    63.956] (II) event14 - FHD Camera: FHD Camera: device is a keyboard
[    63.957] (II) event14 - FHD Camera: FHD Camera: device removed
[    63.993] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input29/event14"
[    63.993] (II) XINPUT: Adding extended input device "FHD Camera: FHD Camera" (type: KEYBOARD, id 12)
[    63.995] (II) event14 - FHD Camera: FHD Camera: is tagged by udev as: Keyboard
[    63.995] (II) event14 - FHD Camera: FHD Camera: device is a keyboard
[    63.997] (II) config/udev: Adding input device FHD Camera: FHD IR Camera (/dev/input/event20)
[    63.997] (**) FHD Camera: FHD IR Camera: Applying InputClass "libinput keyboard catchall"
[    63.997] (II) Using input driver 'libinput' for 'FHD Camera: FHD IR Camera'
[    63.997] (**) FHD Camera: FHD IR Camera: always reports core events
[    63.997] (**) Option "Device" "/dev/input/event20"
[    63.999] (II) event20 - FHD Camera: FHD IR Camera: is tagged by udev as: Keyboard
[    63.999] (II) event20 - FHD Camera: FHD IR Camera: device is a keyboard
[    64.000] (II) event20 - FHD Camera: FHD IR Camera: device removed
[    64.039] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.2/input/input36/event20"
[    64.039] (II) XINPUT: Adding extended input device "FHD Camera: FHD IR Camera" (type: KEYBOARD, id 13)
[    64.042] (II) event20 - FHD Camera: FHD IR Camera: is tagged by udev as: Keyboard
[    64.042] (II) event20 - FHD Camera: FHD IR Camera: device is a keyboard
[    64.044] (II) config/udev: Adding input device Logitech G900 (/dev/input/event8)
[    64.044] (**) Logitech G900: Applying InputClass "libinput pointer catchall"
[    64.044] (**) Logitech G900: Applying InputClass "libinput keyboard catchall"
[    64.044] (II) Using input driver 'libinput' for 'Logitech G900'
[    64.044] (**) Logitech G900: always reports core events
[    64.044] (**) Option "Device" "/dev/input/event8"
[    64.047] (II) event8  - Logitech G900: is tagged by udev as: Keyboard Mouse
[    64.047] (II) event8  - Logitech G900: device is a pointer
[    64.047] (II) event8  - Logitech G900: device is a keyboard
[    64.048] (II) event8  - Logitech G900: device removed
[    64.066] (II) libinput: Logitech G900: needs a virtual subdevice
[    64.066] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C539.0003/0003:046D:4053.0006/input/input19/event8"
[    64.066] (II) XINPUT: Adding extended input device "Logitech G900" (type: MOUSE, id 14)
[    64.066] (**) Option "AccelerationScheme" "none"
[    64.066] (**) Logitech G900: (accel) selected scheme none/0
[    64.066] (**) Logitech G900: (accel) acceleration factor: 2.000
[    64.066] (**) Logitech G900: (accel) acceleration threshold: 4
[    64.069] (II) event8  - Logitech G900: is tagged by udev as: Keyboard Mouse
[    64.070] (II) event8  - Logitech G900: device is a pointer
[    64.070] (II) event8  - Logitech G900: device is a keyboard
[    64.072] (II) config/udev: Adding input device Logitech G900 (/dev/input/mouse0)
[    64.072] (II) No input driver specified, ignoring this device.
[    64.072] (II) This device may have been added with another device file.
[    64.073] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Mouse (/dev/input/event18)
[    64.073] (**) ELAN0305:00 04F3:31FD Mouse: Applying InputClass "libinput pointer catchall"
[    64.073] (II) Using input driver 'libinput' for 'ELAN0305:00 04F3:31FD Mouse'
[    64.073] (**) ELAN0305:00 04F3:31FD Mouse: always reports core events
[    64.073] (**) Option "Device" "/dev/input/event18"
[    64.075] (II) event18 - ELAN0305:00 04F3:31FD Mouse: is tagged by udev as: Mouse Pointingstick
[    64.076] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device is a pointer
[    64.078] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device removed
[    64.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-18/i2c-ELAN0305:00/0018:04F3:31FD.0009/input/input33/event18"
[    64.126] (II) XINPUT: Adding extended input device "ELAN0305:00 04F3:31FD Mouse" (type: MOUSE, id 15)
[    64.126] (**) Option "AccelerationScheme" "none"
[    64.126] (**) ELAN0305:00 04F3:31FD Mouse: (accel) selected scheme none/0
[    64.126] (**) ELAN0305:00 04F3:31FD Mouse: (accel) acceleration factor: 2.000
[    64.126] (**) ELAN0305:00 04F3:31FD Mouse: (accel) acceleration threshold: 4
[    64.129] (II) event18 - ELAN0305:00 04F3:31FD Mouse: is tagged by udev as: Mouse Pointingstick
[    64.130] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device is a pointer
[    64.133] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Mouse (/dev/input/mouse1)
[    64.133] (II) No input driver specified, ignoring this device.
[    64.133] (II) This device may have been added with another device file.
[    64.134] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Touchpad (/dev/input/event19)
[    64.134] (**) ELAN0305:00 04F3:31FD Touchpad: Applying InputClass "libinput touchpad catchall"
[    64.134] (II) Using input driver 'libinput' for 'ELAN0305:00 04F3:31FD Touchpad'
[    64.134] (**) ELAN0305:00 04F3:31FD Touchpad: always reports core events
[    64.134] (**) Option "Device" "/dev/input/event19"
[    64.136] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: is tagged by udev as: Touchpad
[    64.139] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device is a touchpad
[    64.139] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device removed
[    64.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-18/i2c-ELAN0305:00/0018:04F3:31FD.0009/input/input35/event19"
[    64.210] (II) XINPUT: Adding extended input device "ELAN0305:00 04F3:31FD Touchpad" (type: TOUCHPAD, id 16)
[    64.213] (**) Option "AccelerationScheme" "none"
[    64.213] (**) ELAN0305:00 04F3:31FD Touchpad: (accel) selected scheme none/0
[    64.213] (**) ELAN0305:00 04F3:31FD Touchpad: (accel) acceleration factor: 2.000
[    64.213] (**) ELAN0305:00 04F3:31FD Touchpad: (accel) acceleration threshold: 4
[    64.216] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: is tagged by udev as: Touchpad
[    64.217] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device is a touchpad
[    64.217] (II) config/udev: Adding input device ELAN0305:00 04F3:31FD Touchpad (/dev/input/mouse2)
[    64.217] (II) No input driver specified, ignoring this device.
[    64.217] (II) This device may have been added with another device file.
[    64.217] (II) config/udev: Adding input device gpio-keys (/dev/input/event13)
[    64.217] (II) No input driver specified, ignoring this device.
[    64.217] (II) This device may have been added with another device file.
[    64.217] (II) config/udev: Adding input device Intel HID events (/dev/input/event9)
[    64.217] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    64.217] (II) Using input driver 'libinput' for 'Intel HID events'
[    64.217] (**) Intel HID events: always reports core events
[    64.217] (**) Option "Device" "/dev/input/event9"
[    64.217] (II) event9  - Intel HID events: is tagged by udev as: Keyboard
[    64.217] (II) event9  - Intel HID events: device is a keyboard
[    64.218] (II) event9  - Intel HID events: device removed
[    64.240] (**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input20/event9"
[    64.240] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 17)
[    64.241] (II) event9  - Intel HID events: is tagged by udev as: Keyboard
[    64.242] (II) event9  - Intel HID events: device is a keyboard
[    64.243] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event10)
[    64.243] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[    64.243] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[    64.243] (**) Intel HID 5 button array: always reports core events
[    64.243] (**) Option "Device" "/dev/input/event10"
[    64.244] (II) event10 - Intel HID 5 button array: is tagged by udev as: Keyboard
[    64.244] (II) event10 - Intel HID 5 button array: device is a keyboard
[    64.245] (II) event10 - Intel HID 5 button array: device removed
[    64.286] (**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input21/event10"
[    64.286] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 18)
[    64.288] (II) event10 - Intel HID 5 button array: is tagged by udev as: Keyboard
[    64.288] (II) event10 - Intel HID 5 button array: device is a keyboard
[    64.289] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    64.289] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    64.289] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    64.289] (**) AT Translated Set 2 keyboard: always reports core events
[    64.289] (**) Option "Device" "/dev/input/event3"
[    64.291] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    64.291] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    64.294] (II) event3  - AT Translated Set 2 keyboard: device removed
[    64.316] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    64.316] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19)
[    64.318] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    64.319] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    64.322] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event21)
[    64.322] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[    64.322] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[    64.322] (**) ETPS/2 Elantech Touchpad: always reports core events
[    64.322] (**) Option "Device" "/dev/input/event21"
[    64.324] (II) event21 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[    64.327] (II) event21 - ETPS/2 Elantech Touchpad: device is a touchpad
[    64.328] (II) event21 - ETPS/2 Elantech Touchpad: device removed
[    64.373] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input23/event21"
[    64.373] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 20)
[    64.376] (**) Option "AccelerationScheme" "none"
[    64.376] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[    64.376] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    64.376] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    64.378] (II) event21 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[    64.381] (II) event21 - ETPS/2 Elantech Touchpad: device is a touchpad
[    64.383] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse3)
[    64.383] (II) No input driver specified, ignoring this device.
[    64.383] (II) This device may have been added with another device file.
[    64.384] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[    64.384] (II) No input driver specified, ignoring this device.
[    64.384] (II) This device may have been added with another device file.
[    64.387] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event11)
[    64.387] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    64.387] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[    64.387] (**) MSI WMI hotkeys: always reports core events
[    64.387] (**) Option "Device" "/dev/input/event11"
[    64.388] (II) event11 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[    64.388] (II) event11 - MSI WMI hotkeys: device is a keyboard
[    64.389] (II) event11 - MSI WMI hotkeys: device removed
[    64.426] (**) Option "config_info" "udev:/sys/devices/virtual/input/input22/event11"
[    64.426] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 21)
[    64.427] (II) event11 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[    64.428] (II) event11 - MSI WMI hotkeys: device is a keyboard
[    64.464] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[    64.464] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[    64.464] (**) SteelSeries SteelSeries KLC: always reports core events
[    64.464] (**) Option "Device" "/dev/input/event4"
[    64.464] (II) libinput: SteelSeries SteelSeries KLC: is a virtual subdevice
[    64.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-11/2-11:1.1/0003:1038:113A.0005/input/input10/event4"
[    64.464] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: KEYBOARD, id 22)
[    64.464] (**) SteelSeries SteelSeries ALC: Applying InputClass "libinput keyboard catchall"
[    64.464] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries ALC'
[    64.464] (**) SteelSeries SteelSeries ALC: always reports core events
[    64.464] (**) Option "Device" "/dev/input/event5"
[    64.464] (II) libinput: SteelSeries SteelSeries ALC: is a virtual subdevice
[    64.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.1/0003:1038:114D.0008/input/input16/event5"
[    64.464] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries ALC" (type: KEYBOARD, id 23)
[    64.464] (**) Logitech G900: Applying InputClass "libinput pointer catchall"
[    64.464] (**) Logitech G900: Applying InputClass "libinput keyboard catchall"
[    64.464] (II) Using input driver 'libinput' for 'Logitech G900'
[    64.464] (**) Logitech G900: always reports core events
[    64.464] (**) Option "Device" "/dev/input/event8"
[    64.464] (II) libinput: Logitech G900: is a virtual subdevice
[    64.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.2/0003:046D:C539.0003/0003:046D:4053.0006/input/input19/event8"
[    64.464] (II) XINPUT: Adding extended input device "Logitech G900" (type: KEYBOARD, id 24)
[    64.464] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.NoReply (Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
[    64.468] (II) event7  - Video Bus: device removed
[    64.523] (II) event6  - Video Bus: device removed
[    64.556] (II) event2  - Power Button: device removed
[    64.573] (II) event1  - Sleep Button: device removed
[    64.589] (II) event14 - FHD Camera: FHD Camera: device removed
[    64.623] (II) event20 - FHD Camera: FHD IR Camera: device removed
[    64.656] (II) event18 - ELAN0305:00 04F3:31FD Mouse: device removed
[    64.693] (II) event19 - ELAN0305:00 04F3:31FD Touchpad: device removed
[    64.726] (II) event9  - Intel HID events: device removed
[    64.743] (II) event10 - Intel HID 5 button array: device removed
[    64.759] (II) event3  - AT Translated Set 2 keyboard: device removed
[    64.776] (II) event21 - ETPS/2 Elantech Touchpad: device removed
[    64.809] (II) event11 - MSI WMI hotkeys: device removed
[    64.843] (II) event4  - SteelSeries SteelSeries KLC: device removed
[    64.869] (II) event5  - SteelSeries SteelSeries ALC: device removed
[    64.886] (II) event8  - Logitech G900: device removed
[    64.904] (II) UnloadModule: "libinput"
[    64.904] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.905] (II) UnloadModule: "libinput"
[    64.907] (II) UnloadModule: "libinput"
[    64.939] (II) NVIDIA(GPU-0): Deleting GPU-0
[    64.961] (II) Server terminated successfully (0). Closing log file.

P.S. (it may be important)

Wayland session seems to work very good, I didn't nocite any serious issues. However, I would prefer to use X11 becasue I'm not familiar with Wayland and read about some major drawbacks still present in it.

Last edited by Zibi1981 (2023-03-05 18:34:22)

V1del · 2023-03-05 18:39:51

Remove xf86-video-intel, it's not maintained on newer iGPUs

Trilby · 2023-03-05 19:00:27

Zibi1981 wrote:

Wayland session seems to work very good, I didn't nocite any serious issues. However, I would prefer to use X11 becasue I'm not familiar with Wayland and read about some major drawbacks still present in it.

Was what you read current? I was pretty skeptical about wayland for quite a while, but it has certainly caught up to X11, and I imagine less and less development / bug-fixing / testing will be going into X11-related code.

However, if the issues are specific to the X11 session, then V1del's note on the intel driver is almost certainly the cause.

Last edited by Trilby (2023-03-05 19:01:01)

Zibi1981 · 2023-03-05 22:23:54

Uninstalling xf86-video-intel di help, so it was the culprit package. I wonder why it didn't affect Wayland as it did X11.

Trilby wrote:

Was what you read current? I was pretty skeptical about wayland for quite a while, but it has certainly caught up to X11, and I imagine less and less development / bug-fixing / testing will be going into X11-related code.

While searching for some info I've run into this ---> https://community.kde.org/Plasma/Wayland_Showstoppers

PROBLEM SOLVED

Trilby · 2023-03-05 22:27:16

Zibi1981 wrote:

I wonder why it didn't affect Wayland as it did X11.

You wonder why an Xorg video driver didn't affect something that isn't Xorg?

seth · 2023-03-06 08:02:00

Mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

Arch Linux

#1 2023-03-04 22:21:29

[SOLVED] How to check if X11 works from the console?

#2 2023-03-04 22:40:52

Re: [SOLVED] How to check if X11 works from the console?

#3 2023-03-05 15:17:40

Re: [SOLVED] How to check if X11 works from the console?

#4 2023-03-05 15:25:24

Re: [SOLVED] How to check if X11 works from the console?

#5 2023-03-05 16:00:36

Re: [SOLVED] How to check if X11 works from the console?

#6 2023-03-05 16:19:59

Re: [SOLVED] How to check if X11 works from the console?

#7 2023-03-05 16:33:38

Re: [SOLVED] How to check if X11 works from the console?

#8 2023-03-05 16:54:32

Re: [SOLVED] How to check if X11 works from the console?

#9 2023-03-05 17:02:33

Re: [SOLVED] How to check if X11 works from the console?

#10 2023-03-05 17:12:08

Re: [SOLVED] How to check if X11 works from the console?

#11 2023-03-05 17:22:52

Re: [SOLVED] How to check if X11 works from the console?

#12 2023-03-05 18:10:11

Re: [SOLVED] How to check if X11 works from the console?

#13 2023-03-05 18:39:51

Re: [SOLVED] How to check if X11 works from the console?

#14 2023-03-05 19:00:27

Re: [SOLVED] How to check if X11 works from the console?

#15 2023-03-05 22:23:54

Re: [SOLVED] How to check if X11 works from the console?

#16 2023-03-05 22:27:16

Re: [SOLVED] How to check if X11 works from the console?

#17 2023-03-06 08:02:00

Re: [SOLVED] How to check if X11 works from the console?

Board footer