You are not logged in.

Pages: 1

#1 2023-03-13 21:33:08

giampi
Member
Registered: 2023-03-13
Posts: 3

Audio problem after installing arch linux [RESOLVED]

Hello everyone! I'm having an issue after installing Arch linux, everything seems working fine but I'm totally unable to reproduce any sound for the sole exception of the command:

 $ aplay -D plughw:1,0 /usr/share/sounds/alsa/Front_Center.wav

I'm using Pipewire and all my services are up and running fine.
I've installed Arch on a Computer with an external graphic card.

and I've tried to setup the alsa configuration as the wiki suggested.

$ cat ~/.asoundrc 
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1

but still nothing working...

Any help will be greatly appreciated

Last edited by giampi (2023-03-21 20:39:37)

Offline

#2 2023-03-13 21:48:42

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: Audio problem after installing arch linux [RESOLVED]

Remove the asoundrc if you intend to use pipewire and post 

aplay -lL
pactl list cards
pactl list sinks

Offline

#3 2023-03-13 22:18:31

giampi
Member
Registered: 2023-03-13
Posts: 3

Re: Audio problem after installing arch linux [RESOLVED]

I've removed asound as you said.

And these are the outputs

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 9: HDMI 3 [C24F390]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC1220 Analog [ALC1220 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC1220 Digital [ALC1220 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
$ pactl list cards
Card #40
	Name: alsa_card.pci-0000_09_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA ATI HDMI at 0xfce20000 irq 87"
		api.alsa.card.name = "HDA ATI HDMI"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:09:00.1"
		device.description = "Navi 21/23 HDMI/DP Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_09_00.1"
		device.nick = "HDA ATI HDMI"
		device.plugged.usec = "4686312"
		device.product.id = "0xab28"
		device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:07:00.0/0000:08:00.0/0000:09:00.1/sound/card0"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "34"
		object.id = "40"
		object.serial = "40"
		object.path = "alsa:pcm:0"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfce20000 irq 87"
		alsa.driver_name = "snd_hda_intel"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 6, sources: 0, priority: 1, available: yes)
	Active Profile: output:hdmi-stereo-extra3
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
				device.product.name = "C24F390"
			Part of profile(s): output:hdmi-stereo-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 5"
				device.icon_name = "video-display"
				card.profile.port = "4"
			Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
		hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 6"
				device.icon_name = "video-display"
				card.profile.port = "5"
			Part of profile(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5

Card #41
	Name: alsa_card.pci-0000_0b_00.4
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HD-Audio Generic at 0xfcc00000 irq 94"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:0b:00.4"
		device.description = "Starship/Matisse HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_0b_00.4"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "4696687"
		device.product.id = "0x1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "34"
		object.id = "41"
		object.serial = "41"
		object.path = "alsa:pcm:1"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcc00000 irq 94"
		alsa.driver_name = "snd_hda_intel"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
		output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
		output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
		output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
		output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
		output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
		output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
		output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
		output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
		output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
		output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: yes)
		output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
	Active Profile: output:iec958-stereo
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 3"
				card.profile.port = "2"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 4"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 5"
				device.icon_name = "audio-headphones"
				card.profile.port = "4"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "5"
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
$ pactl list sinks
Sink #46
	State: SUSPENDED
	Name: alsa_output.pci-0000_09_00.1.hdmi-stereo-extra3
	Description: Navi 21/23 HDMI/DP Audio Controller Digital Stereo (HDMI 4)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_09_00.1.hdmi-stereo-extra3.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.class = "generic"
		alsa.device = "9"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 3"
		alsa.long_card_name = "HDA ATI HDMI at 0xfce20000 irq 87"
		alsa.name = "C24F390"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HDA ATI HDMI at 0xfce20000 irq 87"
		api.alsa.card.name = "HDA ATI HDMI"
		api.alsa.path = "hdmi:0,3"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "15"
		device.api = "alsa"
		device.class = "sound"
		device.id = "40"
		device.profile.description = "Digital Stereo (HDMI 4)"
		device.profile.name = "hdmi-stereo-extra3"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Navi 21/23 HDMI/DP Audio Controller"
		node.name = "alsa_output.pci-0000_09_00.1.hdmi-stereo-extra3"
		node.nick = "C24F390"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:0:hdmi:0,3:playback"
		priority.driver = "600"
		priority.session = "600"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "34"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "46"
		object.serial = "46"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "32"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.bus = "pci"
		device.bus_path = "pci-0000:09:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_09_00.1"
		device.nick = "HDA ATI HDMI"
		device.plugged.usec = "4686312"
		device.product.id = "0xab28"
		device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:07:00.0/0000:08:00.0/0000:09:00.1/sound/card0"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.string = "0"
	Ports:
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, availability group: Legacy 4, available)
	Active Port: hdmi-output-3
	Formats:
		pcm

Sink #47
	State: SUSPENDED
	Name: alsa_output.pci-0000_0b_00.4.iec958-stereo
	Description: Starship/Matisse HD Audio Controller Digital Stereo (IEC958)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_0b_00.4.iec958-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.device = "1"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC1220 Digital"
		alsa.long_card_name = "HD-Audio Generic at 0xfcc00000 irq 94"
		alsa.name = "ALC1220 Digital"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xfcc00000 irq 94"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "iec958:1"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "11"
		device.api = "alsa"
		device.class = "sound"
		device.id = "41"
		device.profile.description = "Digital Stereo (IEC958)"
		device.profile.name = "iec958-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Starship/Matisse HD Audio Controller"
		node.name = "alsa_output.pci-0000_0b_00.4.iec958-stereo"
		node.nick = "ALC1220 Digital"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:1:iec958:1:playback"
		priority.driver = "736"
		priority.session = "736"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "34"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "32"
		object.serial = "47"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		device.bus = "pci"
		device.bus_path = "pci-0000:0b:00.4"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_0b_00.4"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "4696687"
		device.product.id = "0x1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "1"
	Ports:
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
	Active Port: iec958-stereo-output
	Formats:
		pcm

Offline

#4 2023-03-14 09:21:29

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: Audio problem after installing arch linux [RESOLVED]

This looks correct from here, what do you get when actually playing something? 

paplay -d  alsa_output.pci-0000_0b_00.4.iec958-stereo $inserttestwavhere$

Offline

#5 2023-03-14 16:04:41

giampi
Member
Registered: 2023-03-13
Posts: 3

Re: Audio problem after installing arch linux [RESOLVED]

V1del wrote:

This looks correct from here, what do you get when actually playing something? 

paplay -d  alsa_output.pci-0000_0b_00.4.iec958-stereo $inserttestwavhere$

No errors but no sound

EDIT 2023/03/14
I've found out that if i connect my headphones to my monitor the audio is working.
Maybe this could help

Last edited by giampi (2023-03-14 16:12:09)

Offline

Pages: 1

Board footer

Powered by FluxBB