You are not logged in.
Pages: 1
Installed pulseaudio
pavucontrol shows only HDMI output
[mustafa@cyberboy ~]$ inxi -F
System:
Host: cyberboy Kernel: 6.2.7-arch1-1 arch: x86_64 bits: 64
Desktop: KDE Plasma v: 5.27.3 Distro: Arch Linux
Machine:
Type: Laptop System: HP product: HP Pavilion Gaming Laptop 16-a0xxx v: N/A
serial: <superuser required>
Mobo: HP model: 87AE v: 32.32 serial: <superuser required> UEFI: AMI
v: F.25 date: 11/04/2022
Battery:
ID-1: BAT0 charge: 32.8 Wh (74.9%) condition: 43.8/43.8 Wh (100.0%)
CPU:
Info: 6-core model: Intel Core i7-10750H bits: 64 type: MT MCP cache:
L2: 1.5 MiB
Speed (MHz): avg: 3681 min/max: 800/5000 cores: 1: 4860 2: 4893 3: 2600
4: 2600 5: 4613 6: 2600 7: 2600 8: 4781 9: 4722 10: 4709 11: 2600 12: 2600
Graphics:
Device-1: Intel CometLake-H GT2 [UHD Graphics] driver: i915 v: kernel
Device-2: NVIDIA TU117M [GeForce GTX 1650 Ti Mobile] driver: nouveau
v: kernel
Device-3: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo
Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8 driver: X:
loaded: modesetting dri: iris,nouveau gpu: i915 s-res: 1920x1080
resolution: 1920x1080
API: OpenGL v: 4.6 Mesa 23.0.0 renderer: Mesa Intel UHD Graphics (CML GT2)
Audio:
Device-1: Intel Comet Lake PCH cAVS driver: sof-audio-pci-intel-cnl
Device-2: NVIDIA driver: snd_hda_intel
Sound API: ALSA v: k6.2.7-arch1-1 running: yes
Sound Server-1: PulseAudio v: 16.1 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: eno1 state: down mac: f8:0d:ac:0c:d0:f0
Device-2: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
driver: rtw_8822ce
IF: wlan0 state: up mac: d8:c0:a6:71:d6:6b
Bluetooth:
Device-1: Realtek 802.11ac WLAN Adapter type: USB driver: btusb
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: disabled
rfk-block: hardware: no software: no address: see --recommends
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
Drives:
Local Storage: total: 1.14 TiB used: 236.69 GiB (20.2%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB256HBHQ-000H1
size: 238.47 GiB
ID-2: /dev/sda vendor: Western Digital model: WD10SPSX-60A6WT0
size: 931.51 GiB
Partition:
ID-1: / size: 233.18 GiB used: 8.4 GiB (3.6%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot size: 510 MiB used: 79.9 MiB (15.7%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 59.0 C pch: 53.0 C mobo: N/A gpu: nouveau
temp: 44.0 C
Fan Speeds (RPM): cpu: 0 fan-2: 0
Info:
Processes: 260 Uptime: 13m Memory: 15.27 GiB used: 1.97 GiB (12.9%)
Shell: Bash inxi: 3.3.25
[mustafa@cyberboy ~]$ pacmd list-sinks
1 sink(s) available.
* index: 1
name: <combined>
driver: <module-combine-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 34 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 200.00 ms
module: 22
properties:
device.class = "filter"
device.description = "Simultaneous Output"
device.icon_name = "audio-card"
Last edited by mustafa_nasser (2023-03-18 20:51:56)
Offline
Install sof-firmware and reboot.
Offline
Pages: 1