You are not logged in.

Pages: 1

#1 2023-04-25 13:32:00

d066y
Member
Registered: 2023-04-23
Posts: 13

[SOLVED] Setting the correct resolution of a screen connected via HDMI

I have installed ArchLinux on my laptop, which has GeForce RTX 3060 mobile.

I tried both nvdia and nvidia-dkms drivers, but I cannot see the natural resolution of the monitor. Currently, it is 3840x2160. However, the external monitor supports 7680 x 2160 (Everything gets wider than expected)

I enabled DRM by adding nvidia_drm.modeset=1 to the kernel parameters and run grub-mkconfig -o /boot/grub/grub.cfg

journalctl | grep nvidia :

Apr 25 14:23:57 d066y-arch systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:nvidia_wmi_ec_backlight...
Apr 25 14:23:57 d066y-arch systemd[1]: systemd-backlight@backlight:nvidia_wmi_ec_backlight.service: Deactivated successfully.
Apr 25 14:23:57 d066y-arch systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:nvidia_wmi_ec_backlight.
Apr 25 14:25:15 d066y-arch kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dee3c93b-dcc9-4dc9-a8ce-79ed0cd3516c rw rootflags=subvol=@root cryptdevice=UUID=31daa114-f8db-4469-83c6-c936b9ec82c8:cryptlvm root=UUID=dee3c93b-dcc9-4dc9-a8ce-79ed0cd3516c loglevel=3 quiet nvidia-drm.modeset=1
Apr 25 14:25:15 d066y-arch kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dee3c93b-dcc9-4dc9-a8ce-79ed0cd3516c rw rootflags=subvol=@root cryptdevice=UUID=31daa114-f8db-4469-83c6-c936b9ec82c8:cryptlvm root=UUID=dee3c93b-dcc9-4dc9-a8ce-79ed0cd3516c loglevel=3 quiet nvidia-drm.modeset=1
Apr 25 14:25:15 d066y-arch kernel: nvidia: loading out-of-tree module taints kernel.
Apr 25 14:25:15 d066y-arch kernel: nvidia: module license 'NVIDIA' taints kernel.
Apr 25 14:25:16 d066y-arch kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel
Apr 25 14:25:16 d066y-arch kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 235
Apr 25 14:25:16 d066y-arch kernel: nvidia 0000:01:00.0: enabling device (0000 -> 0003)
Apr 25 14:25:16 d066y-arch kernel: nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
Apr 25 14:25:16 d066y-arch kernel: nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
Apr 25 14:25:16 d066y-arch kernel: nvidia-uvm: Loaded the UVM driver, major device number 511.
Apr 25 14:25:16 d066y-arch systemd-modules-load[987]: Inserted module 'nvidia_uvm'
Apr 25 14:25:16 d066y-arch (udev-worker)[1088]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia-frontend /proc/devices | cut -d \  -f 1) 255'' failed with exit code 1.
Apr 25 14:25:16 d066y-arch kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  530.41.03  Thu Mar 16 19:23:04 UTC 2023
Apr 25 14:25:16 d066y-arch kernel: [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
Apr 25 14:25:16 d066y-arch systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:nvidia_wmi_ec_backlight...
Apr 25 14:25:16 d066y-arch systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:nvidia_wmi_ec_backlight.
Apr 25 14:25:16 d066y-arch (udev-worker)[1029]: nvidia: Process '/usr/bin/bash -c 'for i in $(cat /proc/driver/nvidia/gpus/*/information | grep Minor | cut -d \  -f 4); do /usr/bin/mknod -Z -m 666 /dev/nvidia${i} c $(grep nvidia-frontend /proc/devices | cut -d \  -f 1) ${i}; done'' failed with exit code 1.
Apr 25 14:25:17 d066y-arch kernel: nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DP-4
Apr 25 14:25:17 d066y-arch kernel: nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DP-4
Apr 25 14:25:18 d066y-arch kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0

ls -1 /sys/class/drm/*/edid:

/sys/class/drm/card0-DP-4/edid
/sys/class/drm/card0-DP-5/edid
/sys/class/drm/card0-eDP-2/edid
/sys/class/drm/card0-HDMI-A-4/edid
/sys/class/drm/card1-DP-1/edid
/sys/class/drm/card1-DP-2/edid
/sys/class/drm/card1-DP-3/edid
/sys/class/drm/card1-eDP-1/edid
/sys/class/drm/card1-HDMI-A-1/edid
/sys/class/drm/card1-HDMI-A-2/edid
/sys/class/drm/card1-HDMI-A-3/edid

EDID files are empty under HDMI folders.

Then I did run "xrandr --props":

Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DP-0 disconnected (normal left inverted right x axis y axis)
        CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
                0 1
        CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
        BorderDimensions: 4
                supported: 4
        Border: 0 0 0 0
                range: (0, 65535)
        SignalFormat: DisplayPort
                supported: DisplayPort
        ConnectorType: DisplayPort
        ConnectorNumber: 4
        _ConnectorLocation: 4
        non-desktop: 0
                supported: 0, 1
DP-1 disconnected (normal left inverted right x axis y axis)
        CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
                0 1
        CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
        BorderDimensions: 4
                supported: 4
        Border: 0 0 0 0
                range: (0, 65535)
        SignalFormat: TMDS
                supported: TMDS
        ConnectorType: DisplayPort
        ConnectorNumber: 4
        _ConnectorLocation: 4
        non-desktop: 0
                supported: 0, 1
DP-2 disconnected (normal left inverted right x axis y axis)
        CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
                0 1
        CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
        BorderDimensions: 4
                supported: 4
        Border: 0 0 0 0
                range: (0, 65535)
        SignalFormat: DisplayPort
                supported: DisplayPort
        ConnectorType: DisplayPort
        ConnectorNumber: 1
        _ConnectorLocation: 1
        non-desktop: 0
                supported: 0, 1
DP-3 disconnected (normal left inverted right x axis y axis)
        CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
                0 1
        CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
        BorderDimensions: 4
                supported: 4
        Border: 0 0 0 0
                range: (0, 65535)
        SignalFormat: TMDS
                supported: TMDS
        ConnectorType: DisplayPort
        ConnectorNumber: 1
        _ConnectorLocation: 1
        non-desktop: 0
                supported: 0, 1
HDMI-0 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 1190mm x 340mm
        _MUTTER_PRESENTATION_OUTPUT: 0
        EDID:
                00ffffffffffff004c2daa7148434730
                1c200103807722782ac725b14b46a826
                0e5054bfef80714f810081c08180a9c0
                b3009500d1c01a6800a0f0381f403020
                3a00a9504100001a000000fd0032781e
                ff77000a202020202020000000fc004c
                533439414739350a20202020000000ff
                00484e54543730303137310a20200108
                02033cf04861101f0413120376230907
                0783010000e2004fe305c00067030c00
                1000b84067d85dc40178805be6060501
                8b7303e20f81e5018b849001565e00a0
                a0a0295030203500a9504100001ae77c
                70a0d0a0295030203a00a9504100001a
                00000000000000000000000000000000
                00000000000000000000000000000081
        CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
                0 1
        CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
        BorderDimensions: 4
                supported: 4
        Border: 0 0 0 0
                range: (0, 65535)
        SignalFormat: TMDS
                supported: TMDS
        ConnectorType: HDMI
        ConnectorNumber: 2
        _ConnectorLocation: 2
        non-desktop: 0
                supported: 0, 1
   3840x1080     59.97 +
   3840x2160    119.88*   59.94
   3440x1440     59.97
   2560x1440     59.95
   1920x1080     60.00    59.94    50.00
   1680x1050     59.95
   1600x900      60.00
   1440x900      59.89
   1280x1024     75.02    60.02
   1280x800      59.81
   1280x720      60.00    59.94    50.00
   1152x864      75.00
   1024x768      75.03    70.07    60.00
   800x600       75.00    72.19    60.32    56.25
   720x576       50.00
   720x480       59.94
   640x480       75.00    72.81    59.94
DP-4 disconnected (normal left inverted right x axis y axis)
        CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
                0 1
        CscMatrix: 65536 0 0 0 0 65536 0 0 0 0 65536 0
        BorderDimensions: 4
                supported: 4
        Border: 0 0 0 0
                range: (0, 65535)
        SignalFormat: DisplayPort
                supported: DisplayPort
        ConnectorType: Panel
        ConnectorNumber: 0
        _ConnectorLocation: 0
        non-desktop: 0
                supported: 0, 1

Parse EDID:

Checksum Correct

Section "Monitor"
        Identifier "LS49AG95"
        ModelName "LS49AG95"
        VendorName "SAM"
        # Monitor Manufactured week 28 of 2022
        # EDID version 1.3
        # Digital Display
        DisplaySize 1190 340
        Gamma 2.20
        Option "DPMS" "true"
        Horizsync 30-183
        VertRefresh 50-120
        # Maximum pixel clock is 500MHz
        #Not giving standard mode: 1152x864, 75Hz
        #Not giving standard mode: 1280x800, 60Hz
        #Not giving standard mode: 1280x720, 60Hz
        #Not giving standard mode: 1280x1024, 60Hz
        #Not giving standard mode: 1600x900, 60Hz
        #Not giving standard mode: 1680x1050, 60Hz
        #Not giving standard mode: 1440x900, 60Hz
        #Not giving standard mode: 1920x1080, 60Hz

        #Extension block found. Parsing...
        Modeline        "Mode 5" +hsync +vsync
        Modeline        "Mode 0" +hsync -vsync
        Modeline        "Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
        Modeline        "Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
        Modeline        "Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync
        Modeline        "Mode 4" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
        Modeline        "Mode 6" +hsync -vsync
        Option "PreferredMode" "Mode 5"
EndSection

I tried to add a custom resolution by https://wiki.archlinux.org/title/xrandr … esolutions but getting "X Error of failed request: BadMatch". Additionally, "xrandr --newmode" adds the new profile under DP-4, not the HDMI interface.

xorg log:

[    39.729]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    39.730] Current Operating System: Linux d066y-arch 6.2.12-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 20 Apr 2023 16:11:55 +0000 x86_64
[    39.730] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dee3c93b-dcc9-4dc9-a8ce-79ed0cd3516c rw rootflags=subvol=@root cryptdevice=UUID=31daa114-f8db-4469-83c6-c936b9ec82c8:cryptlvm root=UUID=dee3c93b-dcc9-4dc9-a8ce-79ed0cd3516c loglevel=3 quiet nvidia-drm.modeset=1
[    39.730]
[    39.730] Current version of pixman: 0.42.2
[    39.730]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    39.730] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    39.730] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 25 14:25:21 2023
[    39.730] (==) Using config file: "/etc/X11/xorg.conf"
[    39.730] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    39.730] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    39.731] (==) ServerLayout "Layout0"
[    39.731] (**) |-->Screen "Screen0" (0)
[    39.731] (**) |   |-->Monitor "Monitor0"
[    39.731] (**) |   |-->Device "Device0"
[    39.731] (**) |   |-->GPUDevice "GeForce RTX 3060"
[    39.731] (**) |-->Input Device "Keyboard0"
[    39.731] (**) |-->Input Device "Mouse0"
[    39.731] (==) Automatically adding devices
[    39.731] (==) Automatically enabling devices
[    39.731] (==) Automatically adding GPU devices
[    39.731] (==) Automatically binding GPU devices
[    39.731] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    39.731] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    39.731]    Entry deleted from font path.
[    39.731] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    39.731]    Entry deleted from font path.
[    39.731] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    39.731]    Entry deleted from font path.
[    39.731] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    39.731]    Entry deleted from font path.
[    39.731] (==) FontPath set to:
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi
[    39.731] (==) ModulePath set to "/usr/lib/xorg/modules"
[    39.731] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    39.731] (WW) Disabling Keyboard0
[    39.731] (WW) Disabling Mouse0
[    39.732] (II) Module ABI versions:
[    39.732]    X.Org ANSI C Emulation: 0.4
[    39.732]    X.Org Video Driver: 25.2
[    39.732]    X.Org XInput driver : 24.4
[    39.732]    X.Org Server Extension : 10.0
[    39.732] (++) using VT number 7

[    39.732] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    39.732] (II) xfree86: Adding drm device (/dev/dri/card0)
[    39.732] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    39.758] (II) xfree86: Adding drm device (/dev/dri/card1)
[    39.758] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    39.760] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    39.761] (--) PCI:*(0@0:2:0) 8086:46a6:1028:0b28 rev 12, Mem @ 0x622e000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    39.761] (--) PCI: (1@0:0:0) 10de:2560:1028:0b28 rev 161, Mem @ 0x91000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[    39.761] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    39.761] (II) LoadModule: "glx"
[    39.762] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.769] (II) Module glx: vendor="X.Org Foundation"
[    39.769]    compiled for 1.21.1.8, module version = 1.0.0
[    39.769]    ABI class: X.Org Server Extension, version 10.0
[    39.769] (II) LoadModule: "nvidia"
[    39.769] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    39.777] (II) Module nvidia: vendor="NVIDIA Corporation"
[    39.777]    compiled for 1.6.99.901, module version = 1.0.0
[    39.777]    Module class: X.Org Video Driver
[    39.777] (II) NVIDIA dlloader X Driver  530.41.03  Thu Mar 16 19:25:45 UTC 2023
[    39.777] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    39.779] (II) Loading sub module "fb"
[    39.779] (II) LoadModule: "fb"
[    39.779] (II) Module "fb" already built-in
[    39.779] (II) Loading sub module "wfb"
[    39.779] (II) LoadModule: "wfb"
[    39.780] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    39.780] (II) Module wfb: vendor="X.Org Foundation"
[    39.781]    compiled for 1.21.1.8, module version = 1.0.0
[    39.781]    ABI class: X.Org ANSI C Emulation, version 0.4
[    39.781] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    39.781] (==) NVIDIA(0): RGB weight 888
[    39.781] (==) NVIDIA(0): Default visual is TrueColor
[    39.781] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    39.781] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    39.781] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    39.781] (**) NVIDIA(0): Enabling 2D acceleration
[    39.781] (II) Loading sub module "glxserver_nvidia"
[    39.781] (II) LoadModule: "glxserver_nvidia"
[    39.781] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    39.828] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    39.828]    compiled for 1.6.99.901, module version = 1.0.0
[    39.828]    Module class: X.Org Server Extension
[    39.828] (II) NVIDIA GLX Module  530.41.03  Thu Mar 16 19:27:05 UTC 2023
[    39.828] (II) NVIDIA: The X server supports PRIME Render Offload.
[    39.828] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    39.828] (--) NVIDIA(0):     DFP-0
[    39.828] (--) NVIDIA(0):     DFP-1
[    39.828] (--) NVIDIA(0):     DFP-2
[    39.828] (--) NVIDIA(0):     DFP-3
[    39.828] (--) NVIDIA(0):     DFP-4 (boot)
[    39.828] (--) NVIDIA(0):     DFP-5
[    39.833] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3060 Laptop GPU (GA106-B) at
[    39.833] (II) NVIDIA(0):     PCI:1:0:0 (GPU-0)
[    39.833] (--) NVIDIA(0): Memory: 6291456 kBytes
[    39.833] (--) NVIDIA(0): VideoBIOS: 94.06.29.00.34
[    39.833] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    39.833] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    39.833] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    39.833] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    39.833] (--) NVIDIA(GPU-0):
[    39.833] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    39.833] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    39.833] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    39.833] (--) NVIDIA(GPU-0):
[    39.833] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    39.833] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    39.833] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    39.833] (--) NVIDIA(GPU-0):
[    39.833] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    39.833] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    39.833] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    39.833] (--) NVIDIA(GPU-0):
[    39.878] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[    39.878] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[    39.878] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[    39.878] (--) NVIDIA(GPU-0):
[    39.878] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    39.878] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    39.878] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[    39.878] (--) NVIDIA(GPU-0):
[    39.940] (==) NVIDIA(0):
[    39.940] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    39.940] (==) NVIDIA(0):     will be used as the requested mode.
[    39.940] (==) NVIDIA(0):
[    39.945] (II) NVIDIA(0): Validated MetaModes:
[    39.945] (II) NVIDIA(0):     "DFP-4:nvidia-auto-select"
[    39.945] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[    40.132] (--) NVIDIA(0): DPI set to (54, 107); computed from "UseEdidDpi" X config
[    40.132] (--) NVIDIA(0):     option
[    40.132] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    40.132] (II) NVIDIA:     access.
[    40.139] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    40.139] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    40.139] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    40.139] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    40.139] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    40.139] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    40.139] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    40.139] (II) NVIDIA(0):     Config Options in the README.
[    40.150] (II) NVIDIA(0): Setting mode "DFP-4:nvidia-auto-select"
[    40.207] (==) NVIDIA(0): Disabling shared memory pixmaps
[    40.207] (==) NVIDIA(0): Backing store enabled
[    40.207] (==) NVIDIA(0): Silken mouse enabled
[    40.207] (**) NVIDIA(0): DPMS enabled
[    40.207] (II) Loading sub module "dri2"
[    40.207] (II) LoadModule: "dri2"
[    40.208] (II) Module "dri2" already built-in
[    40.208] (II) NVIDIA(0): [DRI2] Setup complete
[    40.208] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    40.208] (II) Initializing extension Generic Event Extension
[    40.208] (II) Initializing extension SHAPE
[    40.208] (II) Initializing extension MIT-SHM
[    40.208] (II) Initializing extension XInputExtension
[    40.208] (II) Initializing extension XTEST
[    40.208] (II) Initializing extension BIG-REQUESTS
[    40.208] (II) Initializing extension SYNC
[    40.208] (II) Initializing extension XKEYBOARD
[    40.208] (II) Initializing extension XC-MISC
[    40.208] (II) Initializing extension SECURITY
[    40.208] (II) Initializing extension XFIXES
[    40.208] (II) Initializing extension RENDER
[    40.208] (II) Initializing extension RANDR
[    40.208] (II) Initializing extension COMPOSITE
[    40.208] (II) Initializing extension DAMAGE
[    40.208] (II) Initializing extension MIT-SCREEN-SAVER
[    40.208] (II) Initializing extension DOUBLE-BUFFER
[    40.208] (II) Initializing extension RECORD
[    40.208] (II) Initializing extension DPMS
[    40.208] (II) Initializing extension Present
[    40.208] (II) Initializing extension DRI3
[    40.209] (II) Initializing extension X-Resource
[    40.209] (II) Initializing extension XVideo
[    40.209] (II) Initializing extension XVideo-MotionCompensation
[    40.209] (II) Initializing extension GLX
[    40.209] (II) Initializing extension GLX
[    40.209] (II) Indirect GLX disabled.
[    40.209] (II) GLX: Another vendor is already registered for screen 0
[    40.209] (II) Initializing extension XFree86-VidModeExtension
[    40.209] (II) Initializing extension XFree86-DGA
[    40.209] (II) Initializing extension XFree86-DRI
[    40.209] (II) Initializing extension DRI2
[    40.209] (II) Initializing extension NV-GLX
[    40.209] (II) Initializing extension NV-CONTROL
[    40.209] (II) Initializing extension XINERAMA
[    40.263] (II) config/udev: Adding input device Video Bus (/dev/input/event17)
[    40.263] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    40.263] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    40.263] (II) LoadModule: "libinput"
[    40.263] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    40.266] (II) Module libinput: vendor="X.Org Foundation"
[    40.266]    compiled for 1.21.1.8, module version = 1.3.0
[    40.266]    Module class: X.Org XInput Driver
[    40.266]    ABI class: X.Org XInput driver, version 24.4
[    40.266] (II) Using input driver 'libinput' for 'Video Bus'
[    40.266] (**) Video Bus: always reports core events
[    40.266] (**) Option "Device" "/dev/input/event17"
[    40.269] (II) event17 - Video Bus: is tagged by udev as: Keyboard
[    40.269] (II) event17 - Video Bus: device is a keyboard
[    40.269] (II) event17 - Video Bus: device removed
[    40.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input27/event17"
[    40.324] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    40.327] (II) event17 - Video Bus: is tagged by udev as: Keyboard
[    40.327] (II) event17 - Video Bus: device is a keyboard
[    40.328] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[    40.328] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    40.328] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    40.328] (II) Using input driver 'libinput' for 'Video Bus'
[    40.328] (**) Video Bus: always reports core events
[    40.328] (**) Option "Device" "/dev/input/event16"
[    40.330] (II) event16 - Video Bus: is tagged by udev as: Keyboard
[    40.330] (II) event16 - Video Bus: device is a keyboard
[    40.330] (II) event16 - Video Bus: device removed
[    40.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input26/event16"
[    40.378] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    40.381] (II) event16 - Video Bus: is tagged by udev as: Keyboard
[    40.381] (II) event16 - Video Bus: device is a keyboard
[    40.382] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    40.382] (II) No input driver specified, ignoring this device.
[    40.382] (II) This device may have been added with another device file.
[    40.383] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    40.383] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    40.383] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    40.383] (II) Using input driver 'libinput' for 'Power Button'
[    40.383] (**) Power Button: always reports core events
[    40.383] (**) Option "Device" "/dev/input/event1"
[    40.383] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    40.383] (II) event1  - Power Button: device is a keyboard
[    40.383] (II) event1  - Power Button: device removed
[    40.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    40.404] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    40.407] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    40.407] (II) event1  - Power Button: device is a keyboard
[    40.409] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[    40.409] (II) No input driver specified, ignoring this device.
[    40.409] (II) This device may have been added with another device file.
[    40.410] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    40.410] (II) No input driver specified, ignoring this device.
[    40.410] (II) This device may have been added with another device file.
[    40.410] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[    40.410] (II) No input driver specified, ignoring this device.
[    40.410] (II) This device may have been added with another device file.
[    40.411] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[    40.411] (II) No input driver specified, ignoring this device.
[    40.411] (II) This device may have been added with another device file.
[    40.412] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event3)
[    40.412] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "evdev keyboard catchall"
[    40.412] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall"
[    40.412] (II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID'
[    40.412] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
[    40.412] (**) Option "Device" "/dev/input/event3"
[    40.414] (II) event3  - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[    40.414] (II) event3  - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[    40.414] (II) event3  - Yubico YubiKey OTP+FIDO+CCID: device removed
[    40.461] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1050:0407.0007/input/input9/event3"
[    40.461] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 9)
[    40.465] (II) event3  - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[    40.465] (II) event3  - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[    40.466] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event14)
[    40.466] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "evdev keyboard catchall"
[    40.466] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[    40.466] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[    40.466] (**) Integrated_Webcam_HD: Integrate: always reports core events
[    40.466] (**) Option "Device" "/dev/input/event14"
[    40.468] (II) event14 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    40.468] (II) event14 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    40.468] (II) event14 - Integrated_Webcam_HD: Integrate: device removed
[    40.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input24/event14"
[    40.504] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 10)
[    40.508] (II) event14 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    40.508] (II) event14 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    40.510] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event15)
[    40.510] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "evdev keyboard catchall"
[    40.510] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[    40.510] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[    40.510] (**) Integrated_Webcam_HD: Integrate: always reports core events
[    40.510] (**) Option "Device" "/dev/input/event15"
[    40.511] (II) event15 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    40.511] (II) event15 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    40.511] (II) event15 - Integrated_Webcam_HD: Integrate: device removed
[    40.547] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.2/input/input25/event15"
[    40.548] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 11)
[    40.551] (II) event15 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    40.551] (II) event15 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    40.553] (II) config/udev: Adding input device DELL Technologies Keyboard (/dev/input/event4)
[    40.553] (**) DELL Technologies Keyboard: Applying InputClass "evdev keyboard catchall"
[    40.553] (**) DELL Technologies Keyboard: Applying InputClass "libinput keyboard catchall"
[    40.553] (II) Using input driver 'libinput' for 'DELL Technologies Keyboard'
[    40.553] (**) DELL Technologies Keyboard: always reports core events
[    40.553] (**) Option "Device" "/dev/input/event4"
[    40.555] (II) event4  - DELL Technologies Keyboard: is tagged by udev as: Keyboard
[    40.555] (II) event4  - DELL Technologies Keyboard: device is a keyboard
[    40.555] (II) event4  - DELL Technologies Keyboard: device removed
[    40.574] (II) libinput: DELL Technologies Keyboard: needs a virtual subdevice
[    40.574] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:0D62:BABC.0005/input/input7/event4"
[    40.575] (II) XINPUT: Adding extended input device "DELL Technologies Keyboard" (type: MOUSE, id 12)
[    40.575] (**) Option "AccelerationScheme" "none"
[    40.575] (**) DELL Technologies Keyboard: (accel) selected scheme none/0
[    40.575] (**) DELL Technologies Keyboard: (accel) acceleration factor: 2.000
[    40.575] (**) DELL Technologies Keyboard: (accel) acceleration threshold: 4
[    40.578] (II) event4  - DELL Technologies Keyboard: is tagged by udev as: Keyboard
[    40.579] (II) event4  - DELL Technologies Keyboard: device is a keyboard
[    40.580] (II) config/udev: Adding input device DELL0B28:00 06CB:CE61 Mouse (/dev/input/event12)
[    40.580] (**) DELL0B28:00 06CB:CE61 Mouse: Applying InputClass "evdev pointer catchall"
[    40.580] (**) DELL0B28:00 06CB:CE61 Mouse: Applying InputClass "libinput pointer catchall"
[    40.580] (II) Using input driver 'libinput' for 'DELL0B28:00 06CB:CE61 Mouse'
[    40.580] (**) DELL0B28:00 06CB:CE61 Mouse: always reports core events
[    40.580] (**) Option "Device" "/dev/input/event12"
[    40.582] (II) event12 - DELL0B28:00 06CB:CE61 Mouse: is tagged by udev as: Mouse Pointingstick
[    40.582] (II) event12 - DELL0B28:00 06CB:CE61 Mouse: device is a pointer
[    40.583] (II) event12 - DELL0B28:00 06CB:CE61 Mouse: device removed
[    40.647] (II) libinput: DELL0B28:00 06CB:CE61 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    40.647] (II) libinput: DELL0B28:00 06CB:CE61 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    40.647] (II) libinput: DELL0B28:00 06CB:CE61 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    40.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.1/i2c-0/i2c-DELL0B28:00/0018:06CB:CE61.0008/input/input21/event12"
[    40.648] (II) XINPUT: Adding extended input device "DELL0B28:00 06CB:CE61 Mouse" (type: MOUSE, id 13)
[    40.648] (**) Option "AccelerationScheme" "none"
[    40.648] (**) DELL0B28:00 06CB:CE61 Mouse: (accel) selected scheme none/0
[    40.648] (**) DELL0B28:00 06CB:CE61 Mouse: (accel) acceleration factor: 2.000
[    40.648] (**) DELL0B28:00 06CB:CE61 Mouse: (accel) acceleration threshold: 4
[    40.651] (II) event12 - DELL0B28:00 06CB:CE61 Mouse: is tagged by udev as: Mouse Pointingstick
[    40.652] (II) event12 - DELL0B28:00 06CB:CE61 Mouse: device is a pointer
[    40.654] (II) config/udev: Adding input device DELL0B28:00 06CB:CE61 Mouse (/dev/input/mouse0)
[    40.654] (II) No input driver specified, ignoring this device.
[    40.654] (II) This device may have been added with another device file.
[    40.655] (II) config/udev: Adding input device DELL0B28:00 06CB:CE61 Touchpad (/dev/input/event13)
[    40.655] (**) DELL0B28:00 06CB:CE61 Touchpad: Applying InputClass "evdev touchpad catchall"
[    40.655] (**) DELL0B28:00 06CB:CE61 Touchpad: Applying InputClass "libinput touchpad catchall"
[    40.655] (**) DELL0B28:00 06CB:CE61 Touchpad: Applying InputClass "touchpad catchall"
[    40.655] (**) DELL0B28:00 06CB:CE61 Touchpad: Applying InputClass "Default clickpad buttons"
[    40.655] (II) LoadModule: "synaptics"
[    40.656] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    40.657] (II) Module synaptics: vendor="X.Org Foundation"
[    40.657]    compiled for 1.21.1.3, module version = 1.9.2
[    40.657]    Module class: X.Org XInput Driver
[    40.657]    ABI class: X.Org XInput driver, version 24.4
[    40.657] (II) Using input driver 'synaptics' for 'DELL0B28:00 06CB:CE61 Touchpad'
[    40.657] (**) DELL0B28:00 06CB:CE61 Touchpad: always reports core events
[    40.657] (**) Option "Device" "/dev/input/event13"
[    40.704] (II) synaptics: DELL0B28:00 06CB:CE61 Touchpad: found clickpad property
[    40.704] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: x-axis range 0 - 1296 (res 12)
[    40.704] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: y-axis range 0 - 752 (res 12)
[    40.704] (II) synaptics: DELL0B28:00 06CB:CE61 Touchpad: device does not report pressure, will use touch data.
[    40.704] (II) synaptics: DELL0B28:00 06CB:CE61 Touchpad: device does not report finger width.
[    40.704] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: buttons: left double triple
[    40.704] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: Vendor 0x6cb Product 0xce61
[    40.704] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: invalid pressure range.  defaulting to 0 - 255
[    40.704] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: invalid finger width range.  defaulting to 0 - 15
[    40.705] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    40.705] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: touchpad found
[    40.705] (**) DELL0B28:00 06CB:CE61 Touchpad: always reports core events
[    40.737] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.1/i2c-0/i2c-DELL0B28:00/0018:06CB:CE61.0008/input/input22/event13"
[    40.737] (II) XINPUT: Adding extended input device "DELL0B28:00 06CB:CE61 Touchpad" (type: TOUCHPAD, id 14)
[    40.738] (**) synaptics: DELL0B28:00 06CB:CE61 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    40.738] (**) synaptics: DELL0B28:00 06CB:CE61 Touchpad: (accel) MaxSpeed is now 1.75
[    40.738] (**) synaptics: DELL0B28:00 06CB:CE61 Touchpad: (accel) AccelFactor is now 0.134
[    40.738] (**) DELL0B28:00 06CB:CE61 Touchpad: (accel) keeping acceleration scheme 1
[    40.738] (**) DELL0B28:00 06CB:CE61 Touchpad: (accel) acceleration profile 1
[    40.738] (**) DELL0B28:00 06CB:CE61 Touchpad: (accel) acceleration factor: 2.000
[    40.738] (**) DELL0B28:00 06CB:CE61 Touchpad: (accel) acceleration threshold: 4
[    40.738] (--) synaptics: DELL0B28:00 06CB:CE61 Touchpad: touchpad found
[    40.740] (II) config/udev: Adding input device DELL0B28:00 06CB:CE61 Touchpad (/dev/input/mouse1)
[    40.740] (**) DELL0B28:00 06CB:CE61 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    40.741] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[    40.741] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[    40.741] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    40.741] (II) Using input driver 'libinput' for 'Intel HID events'
[    40.741] (**) Intel HID events: always reports core events
[    40.741] (**) Option "Device" "/dev/input/event5"
[    40.742] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    40.742] (II) event5  - Intel HID events: device is a keyboard
[    40.743] (II) event5  - Intel HID events: device removed
[    40.764] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input10/event5"
[    40.764] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 15)
[    40.767] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    40.767] (II) event5  - Intel HID events: device is a keyboard
[    40.768] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[    40.768] (**) Intel HID 5 button array: Applying InputClass "evdev keyboard catchall"
[    40.768] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[    40.768] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[    40.769] (**) Intel HID 5 button array: always reports core events
[    40.769] (**) Option "Device" "/dev/input/event6"
[    40.770] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[    40.770] (II) event6  - Intel HID 5 button array: device is a keyboard
[    40.770] (II) event6  - Intel HID 5 button array: device removed
[    40.794] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input11/event6"
[    40.794] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 16)
[    40.797] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[    40.797] (II) event6  - Intel HID 5 button array: device is a keyboard
[    40.799] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    40.799] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    40.799] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    40.799] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    40.799] (**) AT Translated Set 2 keyboard: always reports core events
[    40.799] (**) Option "Device" "/dev/input/event2"
[    40.800] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    40.800] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    40.802] (II) event2  - AT Translated Set 2 keyboard: device removed
[    40.821] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    40.821] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[    40.824] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    40.824] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    40.827] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    40.827] (II) No input driver specified, ignoring this device.
[    40.827] (II) This device may have been added with another device file.
[    40.832] (**) DELL Technologies Keyboard: Applying InputClass "evdev keyboard catchall"
[    40.832] (**) DELL Technologies Keyboard: Applying InputClass "libinput keyboard catchall"
[    40.832] (II) Using input driver 'libinput' for 'DELL Technologies Keyboard'
[    40.832] (**) DELL Technologies Keyboard: always reports core events
[    40.832] (**) Option "Device" "/dev/input/event4"
[    40.832] (II) libinput: DELL Technologies Keyboard: is a virtual subdevice
[    40.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:0D62:BABC.0005/input/input7/event4"
[    40.832] (II) XINPUT: Adding extended input device "DELL Technologies Keyboard" (type: KEYBOARD, id 18)
[    54.404] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    54.404] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    54.404] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    54.404] (--) NVIDIA(GPU-0):
[    54.404] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    54.404] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    54.404] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    54.404] (--) NVIDIA(GPU-0):
[    54.404] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    54.404] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    54.404] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    54.404] (--) NVIDIA(GPU-0):
[    54.404] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    54.404] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    54.404] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    54.404] (--) NVIDIA(GPU-0):
[    54.452] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[    54.452] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[    54.452] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[    54.452] (--) NVIDIA(GPU-0):
[    54.452] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    54.452] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    54.452] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[    54.452] (--) NVIDIA(GPU-0):
[    54.457] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    54.457] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    54.457] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    54.457] (--) NVIDIA(GPU-0):
[    54.457] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    54.457] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    54.457] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    54.457] (--) NVIDIA(GPU-0):
[    54.457] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    54.457] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    54.457] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    54.457] (--) NVIDIA(GPU-0):
[    54.457] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    54.457] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    54.457] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    54.457] (--) NVIDIA(GPU-0):
[    54.503] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[    54.503] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[    54.503] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[    54.503] (--) NVIDIA(GPU-0):
[    54.503] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    54.503] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    54.503] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[    54.503] (--) NVIDIA(GPU-0):
[    54.563] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    54.563] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    54.563] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    54.563] (--) NVIDIA(GPU-0):
[    54.563] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    54.563] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    54.563] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    54.563] (--) NVIDIA(GPU-0):
[    54.563] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    54.563] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    54.563] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    54.563] (--) NVIDIA(GPU-0):
[    54.563] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    54.563] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    54.563] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    54.563] (--) NVIDIA(GPU-0):
[    54.611] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[    54.611] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[    54.611] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[    54.611] (--) NVIDIA(GPU-0):
[    54.611] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    54.611] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    54.611] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[    54.611] (--) NVIDIA(GPU-0):
[    54.918] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    54.918] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    54.918] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    54.918] (--) NVIDIA(GPU-0):
[    54.918] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    54.918] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    54.918] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    54.918] (--) NVIDIA(GPU-0):
[    54.918] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    54.918] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    54.918] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    54.918] (--) NVIDIA(GPU-0):
[    54.918] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    54.918] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    54.918] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    54.918] (--) NVIDIA(GPU-0):
[    54.965] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[    54.965] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[    54.965] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[    54.965] (--) NVIDIA(GPU-0):
[    54.965] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    54.965] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    54.965] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[    54.965] (--) NVIDIA(GPU-0):
[    55.286] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    55.286] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    55.286] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    55.286] (--) NVIDIA(GPU-0):
[    55.286] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    55.286] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    55.286] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    55.286] (--) NVIDIA(GPU-0):
[    55.286] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    55.286] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    55.286] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[    55.286] (--) NVIDIA(GPU-0):
[    55.286] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    55.286] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    55.286] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    55.286] (--) NVIDIA(GPU-0):
[    55.331] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[    55.331] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[    55.331] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[    55.331] (--) NVIDIA(GPU-0):
[    55.331] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    55.331] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    55.331] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[    55.331] (--) NVIDIA(GPU-0):
[   120.703] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   120.703] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   120.703] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[   120.703] (--) NVIDIA(GPU-0):
[   120.703] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   120.703] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   120.703] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   120.703] (--) NVIDIA(GPU-0):
[   120.703] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   120.703] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   120.703] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[   120.703] (--) NVIDIA(GPU-0):
[   120.703] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   120.703] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   120.703] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   120.703] (--) NVIDIA(GPU-0):
[   120.749] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[   120.749] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[   120.749] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[   120.749] (--) NVIDIA(GPU-0):
[   120.749] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   120.749] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[   120.749] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[   120.749] (--) NVIDIA(GPU-0):
[  1053.150] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1053.150] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[  1053.150] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[  1053.150] (--) NVIDIA(GPU-0):
[  1053.150] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1053.150] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1053.150] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1053.150] (--) NVIDIA(GPU-0):
[  1053.150] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1053.150] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  1053.150] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[  1053.150] (--) NVIDIA(GPU-0):
[  1053.151] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  1053.151] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  1053.151] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[  1053.151] (--) NVIDIA(GPU-0):
[  1053.195] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[  1053.195] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[  1053.195] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[  1053.195] (--) NVIDIA(GPU-0):
[  1053.195] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  1053.195] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  1053.196] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  1053.196] (--) NVIDIA(GPU-0):
[  1331.442] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1331.442] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[  1331.442] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[  1331.442] (--) NVIDIA(GPU-0):
[  1331.443] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1331.443] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1331.443] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1331.443] (--) NVIDIA(GPU-0):
[  1331.443] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1331.443] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  1331.443] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[  1331.443] (--) NVIDIA(GPU-0):
[  1331.443] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  1331.443] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  1331.443] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[  1331.443] (--) NVIDIA(GPU-0):
[  1331.488] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[  1331.488] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[  1331.488] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[  1331.488] (--) NVIDIA(GPU-0):
[  1331.488] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  1331.488] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  1331.488] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  1331.488] (--) NVIDIA(GPU-0):
[  1370.881] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1370.881] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[  1370.881] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[  1370.881] (--) NVIDIA(GPU-0):
[  1370.881] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1370.881] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1370.881] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1370.881] (--) NVIDIA(GPU-0):
[  1370.881] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1370.881] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  1370.881] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[  1370.881] (--) NVIDIA(GPU-0):
[  1370.881] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  1370.881] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  1370.881] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[  1370.881] (--) NVIDIA(GPU-0):
[  1370.926] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[  1370.926] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[  1370.926] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[  1370.926] (--) NVIDIA(GPU-0):
[  1370.926] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  1370.926] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  1370.926] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  1370.926] (--) NVIDIA(GPU-0):
[  1439.727] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1439.727] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[  1439.727] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[  1439.727] (--) NVIDIA(GPU-0):
[  1439.727] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1439.727] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1439.727] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1439.727] (--) NVIDIA(GPU-0):
[  1439.727] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1439.727] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  1439.727] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[  1439.727] (--) NVIDIA(GPU-0):
[  1439.727] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  1439.727] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  1439.727] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[  1439.727] (--) NVIDIA(GPU-0):
[  1439.772] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): connected
[  1439.772] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): Internal TMDS
[  1439.772] (--) NVIDIA(GPU-0): Samsung LS49AG95 (DFP-4): 600.0 MHz maximum pixel clock
[  1439.772] (--) NVIDIA(GPU-0):
[  1439.772] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  1439.772] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  1439.772] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  1439.772] (--) NVIDIA(GPU-0):

xorg.cfg:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 530.41.03

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Samsung"
    ModelName      "LS49AG950NPXEN"
    HorizSync       31.5 - 356.5
    VertRefresh     60.0 - 240.0
    ModeLine       "5120x1440_60.00" 624.50 5120 5496 6048 6976 1440 1443 1453 1493 -hsync +vsync
    ModeLine       "5120x1440_120.00" 1322.75 5120 5560 6128 7136 1440 1443 1453 1545 -hsync +vsync
    ModeLine       "5120x1440_240.00" 2885.25 5120 5600 6176 7232 1440 1443 1453 1663 -hsync +vsync
    ModeLine       "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync
    ModeLine       "2560x1440_120.00" 661.25 2560 2784 3064 3568 1440 1443 1448 1545 -hsync +vsync
    ModeLine       "2560x1440_240.00" 1442.50 2560 2800 3088 3616 1440 1443 1448 1663 -hsync +vsync
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

/etc/X11/xorg.conf.d/20-nvidia.conf:

Section "Device"
    Identifier     "GeForce RTX 3060"
    Driver         "nvidia"
    Option         "NoBandWidthTest"   "true"
    Option         "ModeValidation"    "AllowNonEdidModes,NoEdidMaxPClkCheck,NoMaxPClkCheck"
EndSection

I tried everything I know but stuck having a better resolution.

I would appreciate if you could help me.

Last edited by d066y (2023-04-25 19:24:42)

Offline

#2 2023-04-25 14:35:16

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,337

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

"xorg.conf" and most of that is garbage - and it blocks your 20-nvidia.conf, so the modevalidation option isn't picked up.
Also be more lenient, https://bbs.archlinux.org/viewtopic.php … 6#p2093526 (try ModeDebug as well)

The EDID doesn't announce 7680 x 2160 at all and the internet™ says it's 1440p/32:9 (so 5120x1440)
https://wiki.archlinux.org/title/Xrandr … esolutions

The only 32:9 mode in the EDID is

    DTD 1:  3840x1080   59.968497 Hz  32:9     66.625 kHz    266.500000 MHz (1193 mm x 336 mm)
                 Hfront   48 Hsync  32 Hback   80 Hpol P
                 Vfront    3 Vsync  10 Vback   18 Vpol N

which is the cvt1 reduced blanking mode, so you're looking at

% cvt12 5120 1440 60 -r
# 5120x1440 @ 60.000 Hz Reduced Blank (CVT) field rate 59.977 Hz; hsync: 88.826 kHz; pclk: 469.00 MHz
Modeline "5120x1440_60.00_rb1"  469.00  5120 5168 5200 5280  1440 1443 1453 1481 +hsync -vsync
# or
% cvt12 5120 1440 60 -b
# 5120x1440 @ 60.000 Hz Reduced Blank (CVT) field rate 60.000 Hz; hsync: 88.860 kHz; pclk: 462.07 MHz
Modeline "5120x1440_60.00_rb2"  462.07  5120 5128 5160 5200  1440 1467 1475 1481 +hsync -vsync

Since this is an optimus laptop, can you completely disable the intel chip?
Edit: "in the UEFI/BIOS"

Last edited by seth (2023-04-25 14:35:35)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2023-04-25 16:03:05

d066y
Member
Registered: 2023-04-23
Posts: 13

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

I have disabled Optimus on BIOS, and now I am using only Nvidia. And I removed all the garbage above. Used nvidia-xconfig for a fresh start.

I have created /etc/X11/xorg.conf.d/99-whatever.conf (debug enabled)

Section "Device"
  Driver "nvidia"
  Option "ModeValidation" "AllowNonEdidModes,AllowNon60HzDFPModes,NoMaxPClkCheck,NoEdidMaxPClkCheck,AllowInterlacedModes,NoMaxSizeCheck,NoHorizSyncCheck,NoVertRefreshCheck"
  Option "ModeDebug" "True"
EndSectio

According to https://wiki.archlinux.org/title/NVIDIA … phics_only , I need to create /etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf that I did

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    Option "PrimaryGPU" "yes"
    ModulePath "/usr/lib/nvidia/xorg"
    ModulePath "/usr/lib/xorg/modules"
EndSection

then followed up the LightDM steps (created sh file and made it executable, and added it to the file in the Seat section)

Now I am going to reboot and complete the last step you explained (cvt12 5120 1440 60 -r  or  cvt12 5120 1440 60 -b)

Offline

#4 2023-04-25 16:53:12

d066y
Member
Registered: 2023-04-23
Posts: 13

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

Section "Device"
  Driver "nvidia"
  Option "ModeValidation" "AllowNonEdidModes,AllowNon60HzDFPModes,NoMaxPClkCheck,NoEdidMaxPClkCheck,AllowInterlacedModes,NoMaxSizeCheck,NoHorizSyncCheck,NoVertRefreshCheck"
EndSection

This setting freezes the computer after grub menu. I even cannot see the LightDM. Should I try removing those parameters one by one?

Edit: None of the parameters above works, laptop always freezes after grub menu.

Last edited by d066y (2023-04-25 18:39:46)

Offline

#5 2023-04-25 17:38:41

d066y
Member
Registered: 2023-04-23
Posts: 13

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

https://wiki.archlinux.org/title/NVIDIA … phics_only

These settings didn`t work too

Any idea?

Last edited by d066y (2023-04-25 18:03:04)

Offline

#6 2023-04-25 18:25:44

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

HDMI != HDMI, what version is your cable? (though most of the outputs here suggest this is actually DisplayPort) https://en.wikipedia.org/wiki/HDMI#Refr … dard_video

These settings from the nvidia only link make no difference if you are in actual discrete GPU mode. Also remove the nvidia-xconfig config you should not need to run or have that at all.

Last edited by V1del (2023-04-25 18:27:48)

Offline

#7 2023-04-25 18:49:25

d066y
Member
Registered: 2023-04-23
Posts: 13

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

HDMI 2.0 cable connected to HDMI port

There is only mini-DP port available on the laptop.

I`ll remove nvidia-xconfig, thx

Offline

#8 2023-04-25 19:02:13

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,337

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

HDMI 2.0 is gonna limit you to 3840x2160, though 5120x1440 should™ fit into the signal as well.
Please post an udpated xorg log to illustrate the state after your changes.

Are you certain that the ModeValidation option kills lightdm?
https://wiki.archlinux.org/title/LightD … TTY_output
https://wiki.archlinux.org/title/NVIDIA#Early_loading - I suspect the kms hook only, but added the i915 module there?
You'll at least have to regenerate the intramfs, but to su sure, maybe better remove the kms hook and add the nvidia modules explicitly.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2023-04-25 19:09:57

d066y
Member
Registered: 2023-04-23
Posts: 13

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

As far as I know, mini-DP limits me to 3840 x 2160 (4K) / 60 Hz. This is why I have ordered USB-C to DP port. I hope the Thunderbolt port works as DP. The monitor already has DP port.

I am using nvidia-dkms, should I still use Nvidia modules?

Edit: Thunderbolt has 40GB bandwidth. I think DP requires 80GB

Last edited by d066y (2023-04-25 19:12:31)

Offline

#10 2023-04-25 19:20:23

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,337

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

I am using nvidia-dkms, should I still use Nvidia modules?

Yes, whether they're pre-built or locally compiled is irrelevant.

Let's first focus on the HDMI situation, I didn't see claims of the output to support 7680x2160 anyway (and the EDID doesn't announce any of this…)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2023-04-25 19:23:11

d066y
Member
Registered: 2023-04-23
Posts: 13

Re: [SOLVED] Setting the correct resolution of a screen connected via HDMI

Oh god, please curse me!!

@V1del, thank you very much and all others who I bothered.

I have changed the cable. Now it works flawlessly.

5120x1440 120Hz

Last edited by d066y (2023-04-25 19:24:19)

Offline

Pages: 1

Board footer

Powered by FluxBB