You are not logged in.

Pages: 1

#1 2023-05-02 01:56:56

pentaly
Member
Registered: 2023-04-16
Posts: 10

[SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

last week i install proprietary nvidia driver, and after that i run nvidia-xconfig to generate xorg.conf file. But after that my sddm just displaying black screen when loaded.
i try to reinstall my sddm, add nvidia to kernel parameter, and i add it to initframs too but nothing works. And after that i try to restore my xorg.conf and my sddm works again.
here is the xorg.confg generated by nvidia-xconfig

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "PCI:1:0:0"
EndSection

and here is the original xorg.conf

Section "Device"
    Identifier     "Device0"
    VendorName     "NVIDIA Corporation"
    ChipId          0x0
    ChipRev         0x0
    IRQ             0
EndSection

that is the only difference in the conf file before and after generated by the nvidia-xconfig.
my question is, what happen here? why nvidia-xconfig that supposed to configure my driver but ended up fail.

Last edited by pentaly (2023-05-02 15:20:57)

Offline

#2 2023-05-02 02:12:32

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,727

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

Why do you have an xorg.conf at all?

nvidia-xconfig is never the answer. Do yourself a favor, forget it exists.

Offline

#3 2023-05-02 03:01:02

pentaly
Member
Registered: 2023-04-16
Posts: 10

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

Scimmia wrote:

Why do you have an xorg.conf at all?

nvidia-xconfig is never the answer. Do yourself a favor, forget it exists.

so nvidia-xconfig never works for generating xorg.conf?
or xorg.conf should not exist in the first place?

Offline

#4 2023-05-02 06:52:25

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,337

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

Not either-or, both.

Assuming this is some https://en.wikipedia.org/wiki/XY_problem :
Remove any xorg.conf and post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2023-05-02 07:11:06

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,255

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

nvidia-xconfig works in very simple cases, breaks in  a bunch of corner cases and if you were in a case where it had an actual benefit you'd need to understand more about xorg configuration so that writting it from scratch would be better.

That said that original "breaking" xorg.conf should never exist in that way, since by your own admission this wasn't created by nvidia-xconfig how was it created? That said yes, generally a xorg.conf should not exist and you're better off just trying to start xorg without one in .the vast majority of cases.

Offline

#6 2023-05-02 07:23:18

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,337

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

that is the only difference in the conf file before and after

Since the "original xorg.conf" (or rather: its device section) is complete and utter pointless nonsense, I suspect this is an nvidia-xconfig effort (must be - the typical junk that's produced by nvidia-xconfig is different from the junk that "Xorg -configure" produces) to get the nvidia chip/driver to work and then stripped down/altered to be inert.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2023-05-02 09:08:32

pentaly
Member
Registered: 2023-04-16
Posts: 10

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

seth wrote:

Not either-or, both.

Assuming this is some https://en.wikipedia.org/wiki/XY_problem :
Remove any xorg.conf and post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

i removed my xorg.conf and this is my xorg log

[    37.315] (--) Log file renamed from "/var/log/Xorg.pid-609.log" to "/var/log/Xorg.0.log"
[    37.428] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    37.428] Current Operating System: Linux ArchLinuxKDE 6.1.26-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 26 Apr 2023 19:15:42 +0000 x86_64
[    37.428] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=205b97ff-94af-42b2-8414-9371cc18dacb rw loglevel=3 quiet nvidia-drm.modeset=1 resume=UUID=1201b99d-172b-4ad2-b171-8c83619798bb
[    37.428]  
[    37.428] Current version of pixman: 0.42.2
[    37.428] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    37.428] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    37.428] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May  2 15:59:15 2023
[    37.649] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    37.649] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    37.762] (==) No Layout section.  Using the first Screen section.
[    37.762] (==) No screen section available. Using defaults.
[    37.762] (**) |-->Screen "Default Screen Section" (0)
[    37.762] (**) |   |-->Monitor "<default monitor>"
[    37.762] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    37.763] (==) Automatically adding devices
[    37.763] (==) Automatically enabling devices
[    37.763] (==) Automatically adding GPU devices
[    37.763] (==) Automatically binding GPU devices
[    37.763] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    37.793] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    37.794] 	Entry deleted from font path.
[    37.832] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    37.832] 	Entry deleted from font path.
[    37.832] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    37.832] 	Entry deleted from font path.
[    37.956] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    37.956] (==) ModulePath set to "/usr/lib/xorg/modules"
[    37.956] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    37.956] (II) Module ABI versions:
[    37.956] 	X.Org ANSI C Emulation: 0.4
[    37.956] 	X.Org Video Driver: 25.2
[    37.956] 	X.Org XInput driver : 24.4
[    37.956] 	X.Org Server Extension : 10.0
[    37.963] (++) using VT number 2

[    37.963] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    37.964] (II) xfree86: Adding drm device (/dev/dri/card1)
[    37.964] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    37.964] (II) xfree86: Adding drm device (/dev/dri/card0)
[    37.964] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    37.970] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    37.972] (--) PCI:*(0@0:2:0) 8086:0416:1043:11ed rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    37.972] (--) PCI: (1@0:0:0) 10de:1341:1043:22aa rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    37.972] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    37.972] (II) LoadModule: "glx"
[    38.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    38.447] (II) Module glx: vendor="X.Org Foundation"
[    38.447] 	compiled for 1.21.1.8, module version = 1.0.0
[    38.447] 	ABI class: X.Org Server Extension, version 10.0
[    38.447] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    38.447] 	loading driver: nvidia
[    38.447] (==) Matched intel as autoconfigured driver 0
[    38.447] (==) Matched nvidia as autoconfigured driver 1
[    38.447] (==) Matched nouveau as autoconfigured driver 2
[    38.447] (==) Matched nv as autoconfigured driver 3
[    38.447] (==) Matched modesetting as autoconfigured driver 4
[    38.447] (==) Matched fbdev as autoconfigured driver 5
[    38.447] (==) Matched vesa as autoconfigured driver 6
[    38.447] (==) Assigned the driver to the xf86ConfigLayout
[    38.447] (II) LoadModule: "intel"
[    38.447] (WW) Warning, couldn't open module intel
[    38.447] (EE) Failed to load module "intel" (module does not exist, 0)
[    38.447] (II) LoadModule: "nvidia"
[    38.447] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    38.618] (II) Module nvidia: vendor="NVIDIA Corporation"
[    38.618] 	compiled for 1.6.99.901, module version = 1.0.0
[    38.618] 	Module class: X.Org Video Driver
[    38.644] (II) LoadModule: "nouveau"
[    38.645] (WW) Warning, couldn't open module nouveau
[    38.645] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    38.645] (II) LoadModule: "nv"
[    38.645] (WW) Warning, couldn't open module nv
[    38.645] (EE) Failed to load module "nv" (module does not exist, 0)
[    38.645] (II) LoadModule: "modesetting"
[    38.646] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    38.694] (II) Module modesetting: vendor="X.Org Foundation"
[    38.694] 	compiled for 1.21.1.8, module version = 1.21.1
[    38.694] 	Module class: X.Org Video Driver
[    38.694] 	ABI class: X.Org Video Driver, version 25.2
[    38.694] (II) LoadModule: "fbdev"
[    38.694] (WW) Warning, couldn't open module fbdev
[    38.694] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    38.694] (II) LoadModule: "vesa"
[    38.694] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    38.712] (II) Module vesa: vendor="X.Org Foundation"
[    38.712] 	compiled for 1.21.1.4, module version = 2.6.0
[    38.712] 	Module class: X.Org Video Driver
[    38.712] 	ABI class: X.Org Video Driver, version 25.2
[    38.712] (II) NVIDIA dlloader X Driver  530.41.03  Thu Mar 16 19:25:45 UTC 2023
[    38.712] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    38.713] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    38.713] (II) VESA: driver for VESA chipsets: vesa
[    38.735] (II) modeset(0): using drv /dev/dri/card0
[    38.736] (II) Loading sub module "fb"
[    38.736] (II) LoadModule: "fb"
[    38.736] (II) Module "fb" already built-in
[    38.736] (II) Loading sub module "wfb"
[    38.736] (II) LoadModule: "wfb"
[    38.737] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    38.774] (II) Module wfb: vendor="X.Org Foundation"
[    38.774] 	compiled for 1.21.1.8, module version = 1.0.0
[    38.774] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.776] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    38.776] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    38.776] (==) modeset(0): RGB weight 888
[    38.776] (==) modeset(0): Default visual is TrueColor
[    38.776] (II) Loading sub module "glamoregl"
[    38.776] (II) LoadModule: "glamoregl"
[    38.776] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    38.836] (II) Module glamoregl: vendor="X.Org Foundation"
[    38.836] 	compiled for 1.21.1.8, module version = 1.0.1
[    38.836] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    44.250] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 4600 (HSW GT2)
[    44.250] (II) modeset(0): glamor initialized
[    44.250] (==) modeset(0): VariableRefresh: disabled
[    44.250] (==) modeset(0): AsyncFlipSecondaries: disabled
[    44.251] (II) modeset(0): Output eDP-1 has no monitor section
[    44.253] (II) modeset(0): Output VGA-1 has no monitor section
[    44.254] (II) modeset(0): Output HDMI-1 has no monitor section
[    44.257] (II) modeset(0): EDID for output eDP-1
[    44.257] (II) modeset(0): Manufacturer: AUO  Model: 233c  Serial#: 0
[    44.257] (II) modeset(0): Year: 2012  Week: 0
[    44.257] (II) modeset(0): EDID Version: 1.4
[    44.257] (II) modeset(0): Digital Display Input
[    44.257] (II) modeset(0): 6 bits per channel
[    44.257] (II) modeset(0): Digital interface is undefined
[    44.257] (II) modeset(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    44.257] (II) modeset(0): Gamma: 2.20
[    44.257] (II) modeset(0): No DPMS capabilities specified
[    44.257] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    44.257] (II) modeset(0): First detailed timing is preferred mode
[    44.257] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    44.257] (II) modeset(0): redX: 0.580 redY: 0.335   greenX: 0.330 greenY: 0.565
[    44.257] (II) modeset(0): blueX: 0.155 blueY: 0.140   whiteX: 0.313 whiteY: 0.329
[    44.257] (II) modeset(0): Manufacturer's mask: 0
[    44.257] (II) modeset(0): Supported detailed timing:
[    44.257] (II) modeset(0): clock: 75.0 MHz   Image Size:  309 x 173 mm
[    44.257] (II) modeset(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1572 h_border: 0
[    44.257] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 794 v_border: 0
[    44.257] (II) modeset(0): Unknown vendor-specific block f
[    44.257] (II) modeset(0):  AUO
[    44.257] (II) modeset(0):  B140XTN02.3
[    44.257] (II) modeset(0): EDID (in hex):
[    44.257] (II) modeset(0): 	00ffffffffffff0006af3c2300000000
[    44.257] (II) modeset(0): 	00160104901f117802bbf59455549027
[    44.257] (II) modeset(0): 	23505400000001010101010101010101
[    44.257] (II) modeset(0): 	0101010101014a1d56ce50001a302616
[    44.257] (II) modeset(0): 	360035ad100000180000000f00000000
[    44.257] (II) modeset(0): 	00000000000000000020000000fe0041
[    44.257] (II) modeset(0): 	554f0a202020202020202020000000fe
[    44.257] (II) modeset(0): 	004231343058544e30322e33200a0089
[    44.258] (II) modeset(0): Printing probed modes for output eDP-1
[    44.258] (II) modeset(0): Modeline "1366x768"x60.1   74.98  1366 1404 1426 1572  768 771 777 794 -hsync -vsync (47.7 kHz eP)
[    44.258] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    44.258] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    44.258] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    44.258] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    44.258] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    44.258] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    44.258] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    44.258] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    44.258] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    44.258] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    44.258] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    44.258] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    44.258] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    44.258] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    44.258] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    44.258] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    44.258] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    44.258] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    44.258] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    44.258] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    44.258] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    44.258] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    44.258] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    44.258] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    44.258] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    44.258] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    44.258] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    44.258] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    44.259] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    44.259] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    44.259] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    44.259] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    44.259] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    44.259] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    44.259] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    44.259] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    44.259] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    44.259] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    44.259] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    44.259] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    44.259] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    44.259] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    44.259] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    44.259] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    44.259] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    44.259] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    44.259] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    44.259] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    44.259] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    44.259] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    44.259] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    44.259] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    44.259] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    44.259] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    44.259] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    44.259] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    44.259] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    44.259] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    44.260] (II) modeset(0): EDID for output VGA-1
[    44.261] (II) modeset(0): EDID for output HDMI-1
[    44.262] (II) modeset(0): Output eDP-1 connected
[    44.262] (II) modeset(0): Output VGA-1 disconnected
[    44.262] (II) modeset(0): Output HDMI-1 disconnected
[    44.262] (II) modeset(0): Using exact sizes for initial modes
[    44.262] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    44.262] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    44.262] (==) modeset(0): DPI set to (96, 96)
[    44.262] (II) Loading sub module "fb"
[    44.262] (II) LoadModule: "fb"
[    44.262] (II) Module "fb" already built-in
[    44.262] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    44.262] (==) NVIDIA(G0): RGB weight 888
[    44.262] (==) NVIDIA(G0): Default visual is TrueColor
[    44.262] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    44.262] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    44.262] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[    44.262] (**) NVIDIA(G0): Enabling 2D acceleration
[    44.262] (II) Loading sub module "glxserver_nvidia"
[    44.262] (II) LoadModule: "glxserver_nvidia"
[    44.263] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    45.247] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    45.247] 	compiled for 1.6.99.901, module version = 1.0.0
[    45.247] 	Module class: X.Org Server Extension
[    45.247] (II) NVIDIA GLX Module  530.41.03  Thu Mar 16 19:27:05 UTC 2023
[    45.265] (II) NVIDIA: The X server supports PRIME Render Offload.
[    45.283] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce 840M (GM108-A) at PCI:1:0:0 (GPU-0)
[    45.283] (--) NVIDIA(G0): Memory: 2097152 kBytes
[    45.283] (--) NVIDIA(G0): VideoBIOS: 82.08.14.00.4d
[    45.283] (II) NVIDIA(G0): Detected PCI Express Link width: 4X
[    45.283] (II) NVIDIA(G0): Validated MetaModes:
[    45.283] (II) NVIDIA(G0):     "NULL"
[    45.283] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[    45.283] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[    45.283] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[    45.283] (II) UnloadModule: "vesa"
[    45.283] (II) Unloading vesa
[    45.903] (==) modeset(0): Backing store enabled
[    45.903] (==) modeset(0): Silken mouse enabled
[    45.976] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    45.976] (==) modeset(0): DPMS enabled
[    45.976] (II) modeset(0): [DRI2] Setup complete
[    45.976] (II) modeset(0): [DRI2]   DRI driver: crocus
[    45.976] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[    45.976] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[    45.976] (II) NVIDIA:     access.
[    45.981] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    45.981] (II) NVIDIA(G0):     may not be running or the "AcpidSocketPath" X
[    45.981] (II) NVIDIA(G0):     configuration option may not be set correctly.  When the
[    45.981] (II) NVIDIA(G0):     ACPI event daemon is available, the NVIDIA X driver will
[    45.981] (II) NVIDIA(G0):     try to use it to receive ACPI event notifications.  For
[    45.981] (II) NVIDIA(G0):     details, please see the "ConnectToAcpid" and
[    45.981] (II) NVIDIA(G0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    45.981] (II) NVIDIA(G0):     Config Options in the README.
[    46.027] (II) NVIDIA(G0): Setting mode "NULL"
[    46.037] (==) NVIDIA(G0): Disabling shared memory pixmaps
[    46.037] (==) NVIDIA(G0): Backing store enabled
[    46.037] (==) NVIDIA(G0): Silken mouse enabled
[    46.037] (==) NVIDIA(G0): DPMS enabled
[    46.056] (II) Loading sub module "dri2"
[    46.056] (II) LoadModule: "dri2"
[    46.056] (II) Module "dri2" already built-in
[    46.056] (II) NVIDIA(G0): [DRI2] Setup complete
[    46.056] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia
[    46.056] (II) Initializing extension Generic Event Extension
[    46.056] (II) Initializing extension SHAPE
[    46.057] (II) Initializing extension MIT-SHM
[    46.057] (II) Initializing extension XInputExtension
[    46.057] (II) Initializing extension XTEST
[    46.057] (II) Initializing extension BIG-REQUESTS
[    46.057] (II) Initializing extension SYNC
[    46.057] (II) Initializing extension XKEYBOARD
[    46.057] (II) Initializing extension XC-MISC
[    46.057] (II) Initializing extension SECURITY
[    46.057] (II) Initializing extension XFIXES
[    46.058] (II) Initializing extension RENDER
[    46.058] (II) Initializing extension RANDR
[    46.058] (II) Initializing extension COMPOSITE
[    46.058] (II) Initializing extension DAMAGE
[    46.058] (II) Initializing extension MIT-SCREEN-SAVER
[    46.058] (II) Initializing extension DOUBLE-BUFFER
[    46.058] (II) Initializing extension RECORD
[    46.058] (II) Initializing extension DPMS
[    46.058] (II) Initializing extension Present
[    46.059] (II) Initializing extension DRI3
[    46.059] (II) Initializing extension X-Resource
[    46.059] (II) Initializing extension XVideo
[    46.059] (II) Initializing extension XVideo-MotionCompensation
[    46.059] (II) Initializing extension GLX
[    46.059] (II) Initializing extension GLX
[    46.059] (II) Indirect GLX disabled.
[    46.064] (II) AIGLX: Loaded and initialized crocus
[    46.064] (II) GLX: Initialized DRI2 GL provider for screen 0
[    46.064] (II) Initializing extension XFree86-VidModeExtension
[    46.064] (II) Initializing extension XFree86-DGA
[    46.064] (II) Initializing extension XFree86-DRI
[    46.064] (II) Initializing extension DRI2
[    46.064] (II) Initializing extension NV-GLX
[    46.064] (II) Initializing extension NV-CONTROL
[    46.065] (II) modeset(0): Damage tracking initialized
[    46.065] (II) modeset(0): Setting screen physical size to 361 x 203
[    46.602] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    46.602] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.602] (II) LoadModule: "libinput"
[    46.602] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    46.664] (II) Module libinput: vendor="X.Org Foundation"
[    46.664] 	compiled for 1.21.1.8, module version = 1.3.0
[    46.664] 	Module class: X.Org XInput Driver
[    46.664] 	ABI class: X.Org XInput driver, version 24.4
[    46.664] (II) Using input driver 'libinput' for 'Power Button'
[    46.664] (**) Power Button: always reports core events
[    46.664] (**) Option "Device" "/dev/input/event3"
[    46.703] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    46.703] (II) event3  - Power Button: device is a keyboard
[    46.703] (II) event3  - Power Button: device removed
[    46.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    46.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.731] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    46.731] (II) event3  - Power Button: device is a keyboard
[    46.732] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event7)
[    46.732] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    46.732] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    46.732] (**) Asus Wireless Radio Control: always reports core events
[    46.732] (**) Option "Device" "/dev/input/event7"
[    46.733] (II) event7  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[    46.733] (II) event7  - Asus Wireless Radio Control: device is a keyboard
[    46.733] (II) event7  - Asus Wireless Radio Control: device removed
[    46.764] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input8/event7"
[    46.764] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    46.765] (II) event7  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[    46.765] (II) event7  - Asus Wireless Radio Control: device is a keyboard
[    46.765] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    46.765] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    46.765] (II) Using input driver 'libinput' for 'Video Bus'
[    46.765] (**) Video Bus: always reports core events
[    46.766] (**) Option "Device" "/dev/input/event5"
[    46.766] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    46.766] (II) event5  - Video Bus: device is a keyboard
[    46.766] (II) event5  - Video Bus: device removed
[    46.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[    46.797] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    46.798] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    46.798] (II) event5  - Video Bus: device is a keyboard
[    46.799] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    46.799] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    46.799] (II) Using input driver 'libinput' for 'Video Bus'
[    46.799] (**) Video Bus: always reports core events
[    46.799] (**) Option "Device" "/dev/input/event4"
[    46.799] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    46.800] (II) event4  - Video Bus: device is a keyboard
[    46.800] (II) event4  - Video Bus: device removed
[    46.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input4/event4"
[    46.830] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    46.832] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    46.832] (II) event4  - Video Bus: device is a keyboard
[    46.832] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    46.832] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.832] (II) Using input driver 'libinput' for 'Power Button'
[    46.832] (**) Power Button: always reports core events
[    46.832] (**) Option "Device" "/dev/input/event2"
[    46.833] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    46.833] (II) event2  - Power Button: device is a keyboard
[    46.833] (II) event2  - Power Button: device removed
[    46.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    46.851] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[    46.852] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    46.852] (II) event2  - Power Button: device is a keyboard
[    46.852] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    46.852] (II) No input driver specified, ignoring this device.
[    46.852] (II) This device may have been added with another device file.
[    46.852] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    46.852] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    46.852] (II) Using input driver 'libinput' for 'Sleep Button'
[    46.852] (**) Sleep Button: always reports core events
[    46.852] (**) Option "Device" "/dev/input/event1"
[    46.853] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    46.853] (II) event1  - Sleep Button: device is a keyboard
[    46.853] (II) event1  - Sleep Button: device removed
[    46.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    46.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 11)
[    46.868] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    46.868] (II) event1  - Sleep Button: device is a keyboard
[    46.869] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[    46.869] (II) No input driver specified, ignoring this device.
[    46.869] (II) This device may have been added with another device file.
[    46.869] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event22)
[    46.869] (II) No input driver specified, ignoring this device.
[    46.869] (II) This device may have been added with another device file.
[    46.870] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event23)
[    46.870] (II) No input driver specified, ignoring this device.
[    46.870] (II) This device may have been added with another device file.
[    46.870] (II) config/udev: Adding input device Logitech G304 (/dev/input/event14)
[    46.870] (**) Logitech G304: Applying InputClass "libinput pointer catchall"
[    46.870] (**) Logitech G304: Applying InputClass "libinput keyboard catchall"
[    46.870] (**) Logitech G304: Applying InputClass "My Mouse"
[    46.870] (II) Using input driver 'libinput' for 'Logitech G304'
[    46.870] (**) Logitech G304: always reports core events
[    46.870] (**) Option "Device" "/dev/input/event14"
[    46.872] (II) event14 - Logitech G304: is tagged by udev as: Keyboard Mouse
[    46.872] (II) event14 - Logitech G304: device is a pointer
[    46.872] (II) event14 - Logitech G304: device is a keyboard
[    46.872] (II) event14 - Logitech G304: device removed
[    46.897] (**) Option "AccelSpeed" "0"
[    46.897] (**) Option "AccelProfile" "flat"
[    46.897] (II) libinput: Logitech G304: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.897] (II) libinput: Logitech G304: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.897] (II) libinput: Logitech G304: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.897] (II) libinput: Logitech G304: needs a virtual subdevice
[    46.897] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C53F.0004/0003:046D:4074.0007/input/input35/event14"
[    46.897] (II) XINPUT: Adding extended input device "Logitech G304" (type: MOUSE, id 12)
[    46.897] (**) Option "AccelerationScheme" "none"
[    46.897] (**) Logitech G304: (accel) selected scheme none/0
[    46.897] (**) Logitech G304: (accel) acceleration factor: 2.000
[    46.897] (**) Logitech G304: (accel) acceleration threshold: 4
[    46.899] (II) event14 - Logitech G304: is tagged by udev as: Keyboard Mouse
[    46.899] (II) event14 - Logitech G304: device is a pointer
[    46.899] (II) event14 - Logitech G304: device is a keyboard
[    46.900] (II) config/udev: Adding input device Logitech G304 (/dev/input/mouse1)
[    46.900] (**) Logitech G304: Applying InputClass "My Mouse"
[    46.900] (II) Using input driver 'libinput' for 'Logitech G304'
[    46.900] (**) Logitech G304: always reports core events
[    46.900] (**) Option "Device" "/dev/input/mouse1"
[    46.940] (II) mouse1  - not using input device '/dev/input/mouse1'.
[    46.940] (EE) libinput: Logitech G304: Failed to create a device for /dev/input/mouse1
[    46.940] (EE) PreInit returned 2 for "Logitech G304"
[    46.940] (II) UnloadModule: "libinput"
[    46.941] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard (/dev/input/event15)
[    46.941] (**) BY Tech Usb Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    46.941] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard'
[    46.941] (**) BY Tech Usb Gaming Keyboard: always reports core events
[    46.941] (**) Option "Device" "/dev/input/event15"
[    46.943] (II) event15 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[    46.943] (II) event15 - BY Tech Usb Gaming Keyboard: device is a keyboard
[    46.943] (II) event15 - BY Tech Usb Gaming Keyboard: device removed
[    46.957] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:258A:0016.0005/input/input17/event15"
[    46.957] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard" (type: KEYBOARD, id 13)
[    46.959] (II) event15 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[    46.959] (II) event15 - BY Tech Usb Gaming Keyboard: device is a keyboard
[    46.960] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard System Control (/dev/input/event16)
[    46.960] (**) BY Tech Usb Gaming Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    46.960] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard System Control'
[    46.960] (**) BY Tech Usb Gaming Keyboard System Control: always reports core events
[    46.960] (**) Option "Device" "/dev/input/event16"
[    46.961] (II) event16 - BY Tech Usb Gaming Keyboard System Control: is tagged by udev as: Keyboard
[    46.961] (II) event16 - BY Tech Usb Gaming Keyboard System Control: device is a keyboard
[    46.961] (II) event16 - BY Tech Usb Gaming Keyboard System Control: device removed
[    46.984] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:258A:0016.0006/input/input18/event16"
[    46.984] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard System Control" (type: KEYBOARD, id 14)
[    46.986] (II) event16 - BY Tech Usb Gaming Keyboard System Control: is tagged by udev as: Keyboard
[    46.986] (II) event16 - BY Tech Usb Gaming Keyboard System Control: device is a keyboard
[    46.986] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Consumer Control (/dev/input/event17)
[    46.986] (**) BY Tech Usb Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    46.986] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Consumer Control'
[    46.986] (**) BY Tech Usb Gaming Keyboard Consumer Control: always reports core events
[    46.986] (**) Option "Device" "/dev/input/event17"
[    46.988] (II) event17 - BY Tech Usb Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[    46.988] (II) event17 - BY Tech Usb Gaming Keyboard Consumer Control: device is a keyboard
[    46.988] (II) event17 - BY Tech Usb Gaming Keyboard Consumer Control: device removed
[    47.010] (II) libinput: BY Tech Usb Gaming Keyboard Consumer Control: needs a virtual subdevice
[    47.011] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:258A:0016.0006/input/input19/event17"
[    47.011] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Consumer Control" (type: MOUSE, id 15)
[    47.011] (**) Option "AccelerationScheme" "none"
[    47.011] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[    47.011] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    47.011] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[    47.012] (II) event17 - BY Tech Usb Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[    47.012] (II) event17 - BY Tech Usb Gaming Keyboard Consumer Control: device is a keyboard
[    47.013] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard (/dev/input/event18)
[    47.013] (**) BY Tech Usb Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    47.013] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard'
[    47.013] (**) BY Tech Usb Gaming Keyboard: always reports core events
[    47.013] (**) Option "Device" "/dev/input/event18"
[    47.014] (II) event18 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[    47.014] (II) event18 - BY Tech Usb Gaming Keyboard: device is a keyboard
[    47.014] (II) event18 - BY Tech Usb Gaming Keyboard: device removed
[    47.037] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:258A:0016.0006/input/input21/event18"
[    47.037] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard" (type: KEYBOARD, id 16)
[    47.039] (II) event18 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[    47.039] (II) event18 - BY Tech Usb Gaming Keyboard: device is a keyboard
[    47.040] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Mouse (/dev/input/event19)
[    47.040] (**) BY Tech Usb Gaming Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[    47.040] (**) BY Tech Usb Gaming Keyboard Mouse: Applying InputClass "My Mouse"
[    47.040] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Mouse'
[    47.040] (**) BY Tech Usb Gaming Keyboard Mouse: always reports core events
[    47.040] (**) Option "Device" "/dev/input/event19"
[    47.041] (II) event19 - BY Tech Usb Gaming Keyboard Mouse: is tagged by udev as: Mouse
[    47.041] (II) event19 - BY Tech Usb Gaming Keyboard Mouse: device is a pointer
[    47.041] (II) event19 - BY Tech Usb Gaming Keyboard Mouse: device removed
[    47.080] (**) Option "AccelSpeed" "0"
[    47.080] (**) Option "AccelProfile" "flat"
[    47.080] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.080] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.080] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:258A:0016.0006/input/input22/event19"
[    47.080] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Mouse" (type: MOUSE, id 17)
[    47.081] (**) Option "AccelerationScheme" "none"
[    47.081] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) selected scheme none/0
[    47.081] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) acceleration factor: 2.000
[    47.081] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) acceleration threshold: 4
[    47.082] (II) event19 - BY Tech Usb Gaming Keyboard Mouse: is tagged by udev as: Mouse
[    47.082] (II) event19 - BY Tech Usb Gaming Keyboard Mouse: device is a pointer
[    47.083] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Mouse (/dev/input/mouse2)
[    47.083] (**) BY Tech Usb Gaming Keyboard Mouse: Applying InputClass "My Mouse"
[    47.083] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Mouse'
[    47.083] (**) BY Tech Usb Gaming Keyboard Mouse: always reports core events
[    47.083] (**) Option "Device" "/dev/input/mouse2"
[    47.114] (II) mouse2  - not using input device '/dev/input/mouse2'.
[    47.114] (EE) libinput: BY Tech Usb Gaming Keyboard Mouse: Failed to create a device for /dev/input/mouse2
[    47.114] (EE) PreInit returned 2 for "BY Tech Usb Gaming Keyboard Mouse"
[    47.114] (II) UnloadModule: "libinput"
[    47.115] (II) config/udev: Adding input device Kingston HyperX Cloud Revolver S (/dev/input/event10)
[    47.115] (**) Kingston HyperX Cloud Revolver S: Applying InputClass "libinput keyboard catchall"
[    47.115] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud Revolver S'
[    47.115] (**) Kingston HyperX Cloud Revolver S: always reports core events
[    47.115] (**) Option "Device" "/dev/input/event10"
[    47.116] (II) event10 - Kingston HyperX Cloud Revolver S: is tagged by udev as: Keyboard
[    47.116] (II) event10 - Kingston HyperX Cloud Revolver S: device is a keyboard
[    47.116] (II) event10 - Kingston HyperX Cloud Revolver S: device removed
[    47.147] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.3/0003:0951:16AD.0001/input/input11/event10"
[    47.147] (II) XINPUT: Adding extended input device "Kingston HyperX Cloud Revolver S" (type: KEYBOARD, id 18)
[    47.149] (II) event10 - Kingston HyperX Cloud Revolver S: is tagged by udev as: Keyboard
[    47.149] (II) event10 - Kingston HyperX Cloud Revolver S: device is a keyboard
[    47.149] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event21)
[    47.149] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[    47.149] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[    47.149] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[    47.149] (**) Option "Device" "/dev/input/event21"
[    47.150] (II) event21 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[    47.150] (II) event21 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[    47.150] (II) event21 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[    47.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input27/event21"
[    47.180] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 19)
[    47.182] (II) event21 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[    47.182] (II) event21 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[    47.182] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    47.182] (II) No input driver specified, ignoring this device.
[    47.182] (II) This device may have been added with another device file.
[    47.183] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    47.183] (II) No input driver specified, ignoring this device.
[    47.183] (II) This device may have been added with another device file.
[    47.183] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event20)
[    47.183] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    47.183] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    47.183] (**) Asus WMI hotkeys: always reports core events
[    47.183] (**) Option "Device" "/dev/input/event20"
[    47.184] (II) event20 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[    47.184] (II) event20 - Asus WMI hotkeys: device is a keyboard
[    47.184] (II) event20 - Asus WMI hotkeys: device removed
[    47.234] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input26/event20"
[    47.234] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 20)
[    47.235] (II) event20 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[    47.235] (II) event20 - Asus WMI hotkeys: device is a keyboard
[    47.235] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[    47.235] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    47.235] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    47.235] (**) AT Translated Set 2 keyboard: always reports core events
[    47.235] (**) Option "Device" "/dev/input/event6"
[    47.236] (II) event6  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    47.236] (II) event6  - AT Translated Set 2 keyboard: device is a keyboard
[    47.237] (II) event6  - AT Translated Set 2 keyboard: device removed
[    47.270] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[    47.270] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 21)
[    47.272] (II) event6  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    47.272] (II) event6  - AT Translated Set 2 keyboard: device is a keyboard
[    47.273] (II) config/udev: Adding input device FocalTechPS/2 FocalTech Touchpad (/dev/input/event9)
[    47.273] (**) FocalTechPS/2 FocalTech Touchpad: Applying InputClass "libinput touchpad catchall"
[    47.273] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech Touchpad'
[    47.273] (**) FocalTechPS/2 FocalTech Touchpad: always reports core events
[    47.273] (**) Option "Device" "/dev/input/event9"
[    47.274] (II) event9  - FocalTechPS/2 FocalTech Touchpad: is tagged by udev as: Touchpad
[    47.274] (II) event9  - FocalTechPS/2 FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[    47.275] (II) event9  - FocalTechPS/2 FocalTech Touchpad: device is a touchpad
[    47.275] (II) event9  - FocalTechPS/2 FocalTech Touchpad: device removed
[    47.337] (II) libinput: FocalTechPS/2 FocalTech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.337] (II) libinput: FocalTechPS/2 FocalTech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.337] (II) libinput: FocalTechPS/2 FocalTech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.338] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event9"
[    47.338] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech Touchpad" (type: TOUCHPAD, id 22)
[    47.339] (**) Option "AccelerationScheme" "none"
[    47.339] (**) FocalTechPS/2 FocalTech Touchpad: (accel) selected scheme none/0
[    47.339] (**) FocalTechPS/2 FocalTech Touchpad: (accel) acceleration factor: 2.000
[    47.339] (**) FocalTechPS/2 FocalTech Touchpad: (accel) acceleration threshold: 4
[    47.339] (II) event9  - FocalTechPS/2 FocalTech Touchpad: is tagged by udev as: Touchpad
[    47.340] (II) event9  - FocalTechPS/2 FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[    47.341] (II) event9  - FocalTechPS/2 FocalTech Touchpad: device is a touchpad
[    47.341] (II) config/udev: Adding input device FocalTechPS/2 FocalTech Touchpad (/dev/input/mouse0)
[    47.341] (II) No input driver specified, ignoring this device.
[    47.341] (II) This device may have been added with another device file.
[    47.342] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    47.342] (II) No input driver specified, ignoring this device.
[    47.342] (II) This device may have been added with another device file.
[    47.824] (**) Logitech G304: Applying InputClass "libinput pointer catchall"
[    47.824] (**) Logitech G304: Applying InputClass "libinput keyboard catchall"
[    47.824] (**) Logitech G304: Applying InputClass "My Mouse"
[    47.824] (II) Using input driver 'libinput' for 'Logitech G304'
[    47.824] (**) Logitech G304: always reports core events
[    47.824] (**) Option "Device" "/dev/input/event14"
[    47.824] (II) libinput: Logitech G304: is a virtual subdevice
[    47.824] (**) Option "AccelSpeed" "0"
[    47.824] (**) Option "AccelProfile" "flat"
[    47.824] (II) libinput: Logitech G304: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.824] (II) libinput: Logitech G304: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.824] (II) libinput: Logitech G304: Step value 0 was provided, libinput Fallback acceleration function is used.
[    47.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C53F.0004/0003:046D:4074.0007/input/input35/event14"
[    47.824] (II) XINPUT: Adding extended input device "Logitech G304" (type: KEYBOARD, id 23)
[    47.824] (**) BY Tech Usb Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    47.824] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Consumer Control'
[    47.824] (**) BY Tech Usb Gaming Keyboard Consumer Control: always reports core events
[    47.824] (**) Option "Device" "/dev/input/event17"
[    47.824] (II) libinput: BY Tech Usb Gaming Keyboard Consumer Control: is a virtual subdevice
[    47.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:258A:0016.0006/input/input19/event17"
[    47.824] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Consumer Control" (type: KEYBOARD, id 24)
[    89.480] (II) modeset(0): EDID vendor "AUO", prod id 9020
[    89.480] (II) modeset(0): Printing DDC gathered Modelines:
[    89.480] (II) modeset(0): Modeline "1366x768"x0.0   74.98  1366 1404 1426 1572  768 771 777 794 -hsync -vsync (47.7 kHz eP)
[   110.819] (II) modeset(0): EDID vendor "AUO", prod id 9020
[   110.819] (II) modeset(0): Printing DDC gathered Modelines:
[   110.819] (II) modeset(0): Modeline "1366x768"x0.0   74.98  1366 1404 1426 1572  768 771 777 794 -hsync -vsync (47.7 kHz eP)
[   115.730] (II) modeset(0): EDID vendor "AUO", prod id 9020
[   115.730] (II) modeset(0): Printing DDC gathered Modelines:
[   115.730] (II) modeset(0): Modeline "1366x768"x0.0   74.98  1366 1404 1426 1572  768 771 777 794 -hsync -vsync (47.7 kHz eP)

Offline

#8 2023-05-02 10:35:56

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,337

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

Remove xf86-video-vesa

So this is an optimus setup, the nvidia GPU is available through https://wiki.archlinux.org/title/PRIME
What was the point of generating the xorg.conf?

There're no outputs attached to the nvidia chip, if you for some reason want the server to run on the nvidia chip, ideally deactivate the intel IGP in the BIOS/UEFI and if that's not possible you'll need a https://wiki.archlinux.org/title/PRIME#Reverse_PRIME setup.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2023-05-02 10:42:08

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 15,142

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

[    37.972] (--) PCI:*(0@0:2:0) 8086:0416:1043:11ed rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    37.972] (--) PCI: (1@0:0:0) 10de:1341:1043:22aa rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288

Your system has 2 videocards , an integrated intel gpu and a discrete nvidia gpu . This kind of setup is referred to as an nvidia optimus system .

Apart from the links seth posted, the https://wiki.archlinux.org/title/NVIDIA_Optimus page may also be helpful .

Last edited by Lone_Wolf (2023-05-02 10:42:23)

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#10 2023-05-02 15:20:40

pentaly
Member
Registered: 2023-04-16
Posts: 10

Re: [SOLVED] proprietary nvidia driver wont load using nvidia-xconfig

oh now i understand. Thanks for pointing the documentation for me. ill mark this to solved.

Offline

Pages: 1

Board footer

Powered by FluxBB