You are not logged in.

Pages: 1 2

#1 2023-06-12 19:56:43

evfeal
Member
Registered: 2023-06-12
Posts: 12

"input not supported" error with latest proprietary nvidia drivers

Hello everyone!

I have installed the latest nvidia drivers (dkms) and I am using the latest linux-zen, evertime I start X, I get a "input not supprted" message on my monitor
I have fallowed https://wiki.archlinux.org/title/NVIDIA and https://wiki.archlinux.org/title/NVIDIA#Troubleshooting to the letter and I really dont know where to go
from here. I should also mention that I have tried this on a 2060 super and 3060 ti, and neither work.

Thanks for the help!

Offline

#2 2023-06-12 19:59:51

loqs
Member
Registered: 2014-03-06
Posts: 18,884

Re: "input not supported" error with latest proprietary nvidia drivers

Please post the contents of the system journal and Xorg.log  for a boot with the issue.

Offline

#3 2023-06-12 20:18:42

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

This is the Xorg.0.log

[    14.118] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    14.118] Current Operating System: Linux titanium 6.3.7-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Sat, 10 Jun 2023 00:35:19 +0000 x86_64
[    14.118] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=f4c2815e-7677-4b1d-b527-fc502692d478 rw quiet loglevel=0
[    14.118]  
[    14.119] Current version of pixman: 0.42.2
[    14.119] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.119] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.120] (==) Log file: "/home/evan/.local/share/xorg/Xorg.0.log", Time: Mon Jun 12 13:10:12 2023
[    14.121] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.121] (==) No Layout section.  Using the first Screen section.
[    14.121] (==) No screen section available. Using defaults.
[    14.121] (**) |-->Screen "Default Screen Section" (0)
[    14.121] (**) |   |-->Monitor "<default monitor>"
[    14.121] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.121] (==) Automatically adding devices
[    14.121] (==) Automatically enabling devices
[    14.121] (==) Automatically adding GPU devices
[    14.121] (==) Automatically binding GPU devices
[    14.121] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    14.122] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    14.122] 	Entry deleted from font path.
[    14.122] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    14.122] 	Entry deleted from font path.
[    14.122] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    14.122] 	Entry deleted from font path.
[    14.122] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    14.122] 	Entry deleted from font path.
[    14.122] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    14.122] 	Entry deleted from font path.
[    14.122] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    14.122] 	Entry deleted from font path.
[    14.122] (==) FontPath set to:
	
[    14.122] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.122] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.122] (II) Module ABI versions:
[    14.122] 	X.Org ANSI C Emulation: 0.4
[    14.122] 	X.Org Video Driver: 25.2
[    14.122] 	X.Org XInput driver : 24.4
[    14.122] 	X.Org Server Extension : 10.0
[    14.123] (++) using VT number 1

[    14.124] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    14.126] (II) xfree86: Adding drm device (/dev/dri/card0)
[    14.126] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/drm/card0
[    14.127] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[    14.137] (--) PCI:*(9@0:0:0) 10de:1f06:1458:4009 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    14.137] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    14.137] (II) LoadModule: "glx"
[    14.138] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.142] (II) Module glx: vendor="X.Org Foundation"
[    14.142] 	compiled for 1.21.1.8, module version = 1.0.0
[    14.142] 	ABI class: X.Org Server Extension, version 10.0
[    14.142] (==) Matched nouveau as autoconfigured driver 0
[    14.142] (==) Matched nv as autoconfigured driver 1
[    14.142] (==) Matched modesetting as autoconfigured driver 2
[    14.142] (==) Matched fbdev as autoconfigured driver 3
[    14.142] (==) Matched vesa as autoconfigured driver 4
[    14.142] (==) Assigned the driver to the xf86ConfigLayout
[    14.142] (II) LoadModule: "nouveau"
[    14.142] (WW) Warning, couldn't open module nouveau
[    14.142] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    14.142] (II) LoadModule: "nv"
[    14.143] (WW) Warning, couldn't open module nv
[    14.143] (EE) Failed to load module "nv" (module does not exist, 0)
[    14.143] (II) LoadModule: "modesetting"
[    14.143] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.144] (II) Module modesetting: vendor="X.Org Foundation"
[    14.144] 	compiled for 1.21.1.8, module version = 1.21.1
[    14.144] 	Module class: X.Org Video Driver
[    14.144] 	ABI class: X.Org Video Driver, version 25.2
[    14.144] (II) LoadModule: "fbdev"
[    14.144] (WW) Warning, couldn't open module fbdev
[    14.144] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    14.144] (II) LoadModule: "vesa"
[    14.145] (WW) Warning, couldn't open module vesa
[    14.145] (EE) Failed to load module "vesa" (module does not exist, 0)
[    14.145] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.145] (II) modeset(0): using drv /dev/dri/card0
[    14.145] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    14.145] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.145] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    14.145] (==) modeset(0): RGB weight 888
[    14.145] (==) modeset(0): Default visual is TrueColor
[    14.145] (II) Loading sub module "glamoregl"
[    14.145] (II) LoadModule: "glamoregl"
[    14.145] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    14.148] (II) Module glamoregl: vendor="X.Org Foundation"
[    14.148] 	compiled for 1.21.1.8, module version = 1.0.1
[    14.148] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.226] (II) modeset(0): glamor X acceleration enabled on NV166
[    15.226] (II) modeset(0): glamor initialized
[    15.226] (==) modeset(0): VariableRefresh: disabled
[    15.226] (==) modeset(0): AsyncFlipSecondaries: disabled
[    15.258] (II) modeset(0): Output DP-1 has no monitor section
[    15.259] (II) modeset(0): Output HDMI-1 has no monitor section
[    15.291] (II) modeset(0): Output DP-2 has no monitor section
[    15.816] (II) modeset(0): Output DP-3 has no monitor section
[    15.848] (II) modeset(0): EDID for output DP-1
[    15.849] (II) modeset(0): EDID for output HDMI-1
[    15.881] (II) modeset(0): EDID for output DP-2
[    16.406] (II) modeset(0): EDID for output DP-3
[    16.406] (II) modeset(0): Manufacturer: ACR  Model: 6ab  Serial#: 2453694513
[    16.406] (II) modeset(0): Year: 2019  Week: 24
[    16.406] (II) modeset(0): EDID Version: 1.3
[    16.406] (II) modeset(0): Digital Display Input
[    16.406] (II) modeset(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    16.406] (II) modeset(0): Gamma: 2.20
[    16.406] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    16.406] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.406] (II) modeset(0): Default color space is primary color space
[    16.406] (II) modeset(0): First detailed timing is preferred mode
[    16.406] (II) modeset(0): redX: 0.653 redY: 0.337   greenX: 0.322 greenY: 0.611
[    16.406] (II) modeset(0): blueX: 0.153 blueY: 0.061   whiteX: 0.313 whiteY: 0.329
[    16.406] (II) modeset(0): Supported established timings:
[    16.406] (II) modeset(0): 720x400@70Hz
[    16.406] (II) modeset(0): 640x480@60Hz
[    16.406] (II) modeset(0): 640x480@67Hz
[    16.406] (II) modeset(0): 800x600@56Hz
[    16.406] (II) modeset(0): 800x600@60Hz
[    16.406] (II) modeset(0): 1024x768@60Hz
[    16.406] (II) modeset(0): 1024x768@70Hz
[    16.406] (II) modeset(0): Manufacturer's mask: 0
[    16.406] (II) modeset(0): Supported standard timings:
[    16.406] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    16.406] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    16.406] (II) modeset(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    16.406] (II) modeset(0): #3: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    16.406] (II) modeset(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    16.406] (II) modeset(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    16.406] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    16.406] (II) modeset(0): Supported detailed timing:
[    16.406] (II) modeset(0): clock: 174.5 MHz   Image Size:  476 x 268 mm
[    16.406] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    16.406] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1119 v_border: 0
[    16.406] (II) modeset(0): Supported detailed timing:
[    16.406] (II) modeset(0): clock: 148.5 MHz   Image Size:  476 x 268 mm
[    16.406] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    16.406] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    16.406] (II) modeset(0): Ranges: V min: 48 V max: 76 Hz, H min: 31 H max: 84 kHz, PixClock max 185 MHz
[    16.406] (II) modeset(0): Monitor name: SB220Q
[    16.406] (II) modeset(0): Supported detailed timing:
[    16.406] (II) modeset(0): clock: 148.5 MHz   Image Size:  476 x 267 mm
[    16.406] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    16.406] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    16.406] (II) modeset(0): Supported detailed timing:
[    16.406] (II) modeset(0): clock: 74.2 MHz   Image Size:  476 x 267 mm
[    16.406] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    16.406] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    16.406] (II) modeset(0): Supported detailed timing:
[    16.406] (II) modeset(0): clock: 27.0 MHz   Image Size:  476 x 267 mm
[    16.406] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    16.406] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    16.406] (II) modeset(0): Supported detailed timing:
[    16.406] (II) modeset(0): clock: 174.5 MHz   Image Size:  476 x 267 mm
[    16.406] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    16.406] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1119 v_border: 0
[    16.406] (II) modeset(0): Number of EDID sections to follow: 1
[    16.406] (II) modeset(0): EDID (in hex):
[    16.406] (II) modeset(0): 	00ffffffffffff000472ab0631684092
[    16.406] (II) modeset(0): 	181d010380301b78ee5a65a756529c27
[    16.406] (II) modeset(0): 	0f5054b30c00714f818081c081009500
[    16.406] (II) modeset(0): 	b300d1c001012a4480a0703827403020
[    16.406] (II) modeset(0): 	3500dc0c1100001a023a801871382d40
[    16.406] (II) modeset(0): 	582c4500dc0c1100001e000000fd0030
[    16.406] (II) modeset(0): 	4c1f5412000a202020202020000000fc
[    16.406] (II) modeset(0): 	005342323230510a2020202020200161
[    16.406] (II) modeset(0): 	02031fb14b900102030405111213141f
[    16.406] (II) modeset(0): 	65030c001000681a00000101304be602
[    16.406] (II) modeset(0): 	3a801871382d40582c4500dc0b110000
[    16.406] (II) modeset(0): 	1e011d007251d01e206e285500dc0b11
[    16.406] (II) modeset(0): 	00001e8c0ad08a20e02d10103e9600dc
[    16.406] (II) modeset(0): 	0b110000182a4480a070382740302035
[    16.406] (II) modeset(0): 	00dc0b1100001a000000000000000000
[    16.406] (II) modeset(0): 	00000000000000000000000000000061
[    16.406] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[    16.406] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[    16.406] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[    16.406] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[    16.406] (II) modeset(0): Printing probed modes for output DP-3
[    16.406] (II) modeset(0): Modeline "1920x1080"x75.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz eP)
[    16.406] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    16.406] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    16.406] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    16.406] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    16.406] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    16.406] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    16.406] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    16.406] (II) modeset(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[    16.406] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    16.406] (II) modeset(0): Modeline "1600x900"x59.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.406] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    16.406] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1440x810"x60.0  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    16.406] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    16.406] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x800"x60.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    16.406] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.406] (II) modeset(0): Modeline "1280x720"x60.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    16.406] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    16.406] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    16.406] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    16.406] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x768"x75.0  170.24  1024 1108 1220 1416  768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    16.406] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.406] (II) modeset(0): Modeline "960x720"x75.0  148.50  960 1032 1144 1320  720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[    16.406] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    16.406] (II) modeset(0): Modeline "928x696"x75.0  144.00  928 992 1104 1280  696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[    16.406] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    16.406] (II) modeset(0): Modeline "896x672"x75.0  130.50  896 944 1052 1228  672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[    16.406] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    16.406] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    16.406] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    16.406] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    16.406] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz d)
[    16.406] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    16.406] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    16.406] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    16.406] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz d)
[    16.406] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.406] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.406] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    16.406] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    16.406] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    16.406] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    16.406] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    16.406] (II) modeset(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[    16.406] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    16.406] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    16.406] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    16.406] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    16.406] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    16.406] (II) modeset(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[    16.406] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    16.406] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    16.406] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    16.406] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    16.406] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz d)
[    16.406] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[    16.406] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.406] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.406] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.406] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    16.406] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    16.406] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.406] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    16.406] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    16.406] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    16.406] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    16.406] (II) modeset(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[    16.406] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    16.406] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    16.406] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    16.406] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    16.406] (II) modeset(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[    16.406] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[    16.406] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    16.406] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    16.406] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    16.406] (II) modeset(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[    16.406] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    16.406] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    16.406] (II) modeset(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[    16.406] (II) modeset(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[    16.407] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    16.407] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    16.407] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    16.407] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    16.407] (II) modeset(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[    16.407] (II) modeset(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[    16.407] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    16.407] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    16.407] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    16.407] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    16.407] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    16.407] (II) modeset(0): Output DP-1 disconnected
[    16.407] (II) modeset(0): Output HDMI-1 disconnected
[    16.407] (II) modeset(0): Output DP-2 disconnected
[    16.407] (II) modeset(0): Output DP-3 connected
[    16.407] (II) modeset(0): Using exact sizes for initial modes
[    16.407] (II) modeset(0): Output DP-3 using initial mode 1920x1080 +0+0
[    16.407] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    16.407] (==) modeset(0): DPI set to (96, 96)
[    16.407] (II) Loading sub module "fb"
[    16.407] (II) LoadModule: "fb"
[    16.407] (II) Module "fb" already built-in
[    16.419] (==) modeset(0): Backing store enabled
[    16.419] (==) modeset(0): Silken mouse enabled
[    16.435] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    16.435] (==) modeset(0): DPMS enabled
[    16.435] (II) modeset(0): [DRI2] Setup complete
[    16.435] (II) modeset(0): [DRI2]   DRI driver: nouveau
[    16.435] (II) modeset(0): [DRI2]   VDPAU driver: nouveau
[    16.435] (II) Initializing extension Generic Event Extension
[    16.435] (II) Initializing extension SHAPE
[    16.435] (II) Initializing extension MIT-SHM
[    16.435] (II) Initializing extension XInputExtension
[    16.435] (II) Initializing extension XTEST
[    16.435] (II) Initializing extension BIG-REQUESTS
[    16.435] (II) Initializing extension SYNC
[    16.435] (II) Initializing extension XKEYBOARD
[    16.436] (II) Initializing extension XC-MISC
[    16.436] (II) Initializing extension SECURITY
[    16.436] (II) Initializing extension XFIXES
[    16.436] (II) Initializing extension RENDER
[    16.436] (II) Initializing extension RANDR
[    16.436] (II) Initializing extension COMPOSITE
[    16.436] (II) Initializing extension DAMAGE
[    16.436] (II) Initializing extension MIT-SCREEN-SAVER
[    16.436] (II) Initializing extension DOUBLE-BUFFER
[    16.436] (II) Initializing extension RECORD
[    16.436] (II) Initializing extension DPMS
[    16.436] (II) Initializing extension Present
[    16.436] (II) Initializing extension DRI3
[    16.436] (II) Initializing extension X-Resource
[    16.436] (II) Initializing extension XVideo
[    16.436] (II) Initializing extension XVideo-MotionCompensation
[    16.436] (II) Initializing extension GLX
[    16.440] (II) AIGLX: Loaded and initialized nouveau
[    16.440] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.440] (II) Initializing extension XFree86-VidModeExtension
[    16.440] (II) Initializing extension XFree86-DGA
[    16.441] (II) Initializing extension XFree86-DRI
[    16.441] (II) Initializing extension DRI2
[    16.441] (II) modeset(0): Damage tracking initialized
[    16.441] (II) modeset(0): Setting screen physical size to 508 x 285
[    16.481] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.481] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    16.481] (II) LoadModule: "libinput"
[    16.481] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    16.483] (II) Module libinput: vendor="X.Org Foundation"
[    16.483] 	compiled for 1.21.1.8, module version = 1.3.0
[    16.483] 	Module class: X.Org XInput Driver
[    16.483] 	ABI class: X.Org XInput driver, version 24.4
[    16.483] (II) Using input driver 'libinput' for 'Power Button'
[    16.484] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[    16.484] (**) Power Button: always reports core events
[    16.484] (**) Option "Device" "/dev/input/event1"
[    16.487] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    16.487] (II) event1  - Power Button: device is a keyboard
[    16.487] (II) event1  - Power Button: device removed
[    16.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    16.487] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.488] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    16.488] (II) event1  - Power Button: device is a keyboard
[    16.488] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.488] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    16.488] (II) Using input driver 'libinput' for 'Power Button'
[    16.489] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[    16.489] (**) Power Button: always reports core events
[    16.489] (**) Option "Device" "/dev/input/event0"
[    16.490] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    16.490] (II) event0  - Power Button: device is a keyboard
[    16.490] (II) event0  - Power Button: device removed
[    16.490] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    16.490] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.490] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    16.490] (II) event0  - Power Button: device is a keyboard
[    16.491] (II) config/udev: Adding input device Logitech G413 Carbon Mechanical Gaming Keyboard (/dev/input/event2)
[    16.491] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    16.491] (II) Using input driver 'libinput' for 'Logitech G413 Carbon Mechanical Gaming Keyboard'
[    16.492] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
[    16.492] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: always reports core events
[    16.492] (**) Option "Device" "/dev/input/event2"
[    16.493] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    16.493] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    16.493] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[    16.493] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:06:00.1/usb1/1-1/1-1:1.0/0003:046D:C33A.0001/input/input2/event2"
[    16.493] (II) XINPUT: Adding extended input device "Logitech G413 Carbon Mechanical Gaming Keyboard" (type: KEYBOARD, id 8)
[    16.494] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    16.494] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    16.495] (II) config/udev: Adding input device Logitech G413 Carbon Mechanical Gaming Keyboard (/dev/input/event3)
[    16.495] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    16.495] (II) Using input driver 'libinput' for 'Logitech G413 Carbon Mechanical Gaming Keyboard'
[    16.496] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
[    16.496] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: always reports core events
[    16.496] (**) Option "Device" "/dev/input/event3"
[    16.497] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    16.497] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    16.497] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[    16.497] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:06:00.1/usb1/1-1/1-1:1.1/0003:046D:C33A.0002/input/input3/event3"
[    16.497] (II) XINPUT: Adding extended input device "Logitech G413 Carbon Mechanical Gaming Keyboard" (type: KEYBOARD, id 9)
[    16.499] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    16.499] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    16.499] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[    16.499] (II) No input driver specified, ignoring this device.
[    16.499] (II) This device may have been added with another device file.
[    16.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[    16.500] (II) No input driver specified, ignoring this device.
[    16.500] (II) This device may have been added with another device file.
[    16.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    16.500] (II) No input driver specified, ignoring this device.
[    16.500] (II) This device may have been added with another device file.
[    16.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[    16.500] (II) No input driver specified, ignoring this device.
[    16.500] (II) This device may have been added with another device file.
[    16.501] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/event4)
[    16.501] (**) Logitech G502 HERO Gaming Mouse: Applying InputClass "libinput pointer catchall"
[    16.501] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse'
[    16.553] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 31 paused 0
[    16.553] (**) Logitech G502 HERO Gaming Mouse: always reports core events
[    16.553] (**) Option "Device" "/dev/input/event4"
[    16.554] (II) event4  - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[    16.554] (II) event4  - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[    16.554] (II) event4  - Logitech G502 HERO Gaming Mouse: device is a pointer
[    16.554] (II) event4  - Logitech G502 HERO Gaming Mouse: device removed
[    16.554] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    16.554] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    16.554] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    16.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb7/7-3/7-3:1.0/0003:046D:C08B.0003/input/input6/event4"
[    16.554] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse" (type: MOUSE, id 10)
[    16.554] (**) Option "AccelerationScheme" "none"
[    16.554] (**) Logitech G502 HERO Gaming Mouse: (accel) selected scheme none/0
[    16.554] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration factor: 2.000
[    16.554] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration threshold: 4
[    16.555] (II) event4  - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[    16.555] (II) event4  - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[    16.555] (II) event4  - Logitech G502 HERO Gaming Mouse: device is a pointer
[    16.556] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/mouse0)
[    16.556] (II) No input driver specified, ignoring this device.
[    16.556] (II) This device may have been added with another device file.
[    16.556] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse Keyboard (/dev/input/event5)
[    16.556] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    16.556] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[    16.557] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[    16.557] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[    16.557] (**) Option "Device" "/dev/input/event5"
[    16.558] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    16.558] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[    16.558] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[    16.558] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: needs a virtual subdevice
[    16.558] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb7/7-3/7-3:1.1/0003:046D:C08B.0004/input/input7/event5"
[    16.558] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: MOUSE, id 11)
[    16.558] (**) Option "AccelerationScheme" "none"
[    16.558] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) selected scheme none/0
[    16.558] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[    16.558] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[    16.559] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    16.559] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[    16.560] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event11)
[    16.560] (II) No input driver specified, ignoring this device.
[    16.560] (II) This device may have been added with another device file.
[    16.560] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event12)
[    16.560] (II) No input driver specified, ignoring this device.
[    16.560] (II) This device may have been added with another device file.
[    16.560] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event13)
[    16.560] (II) No input driver specified, ignoring this device.
[    16.560] (II) This device may have been added with another device file.
[    16.561] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event14)
[    16.561] (II) No input driver specified, ignoring this device.
[    16.561] (II) This device may have been added with another device file.
[    16.561] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event15)
[    16.561] (II) No input driver specified, ignoring this device.
[    16.561] (II) This device may have been added with another device file.
[    16.561] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    16.561] (II) No input driver specified, ignoring this device.
[    16.561] (II) This device may have been added with another device file.
[    16.566] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    16.566] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[    16.566] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[    16.566] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[    16.566] (**) Option "Device" "/dev/input/event5"
[    16.566] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: is a virtual subdevice
[    16.566] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb7/7-3/7-3:1.1/0003:046D:C08B.0004/input/input7/event5"
[    16.566] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: KEYBOARD, id 12)
[    16.712] (II) modeset(0): Disabling kernel dirty updates, not required.
[    54.973] (II) config/udev: removing device Power Button
[    54.973] (**) Option "fd" "25"
[    54.973] (II) event1  - Power Button: device removed
[    54.973] (II) UnloadModule: "libinput"
[    54.973] (II) systemd-logind: releasing fd for 13:65
[    54.974] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    54.974] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    54.974] (II) Using input driver 'libinput' for 'Power Button'
[    54.974] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0
[    54.974] (**) Power Button: always reports core events
[    54.974] (**) Option "Device" "/dev/input/event1"
[    54.975] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    54.975] (II) event1  - Power Button: device is a keyboard
[    54.975] (II) event1  - Power Button: device removed
[    54.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    54.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    54.975] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    54.975] (II) event1  - Power Button: device is a keyboard
[    54.985] (II) config/udev: removing device Power Button
[    54.986] (**) Option "fd" "28"
[    54.986] (II) event0  - Power Button: device removed
[    54.986] (II) UnloadModule: "libinput"
[    54.986] (II) systemd-logind: releasing fd for 13:64
[    54.986] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    54.986] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    54.986] (II) Using input driver 'libinput' for 'Power Button'
[    54.987] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[    54.987] (**) Power Button: always reports core events
[    54.987] (**) Option "Device" "/dev/input/event0"
[    54.988] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    54.988] (II) event0  - Power Button: device is a keyboard
[    54.988] (II) event0  - Power Button: device removed
[    54.988] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    54.988] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    54.989] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    54.989] (II) event0  - Power Button: device is a keyboard
[    56.172] (II) modeset(0): EDID vendor "ACR", prod id 1707
[    56.172] (II) modeset(0): Using EDID range info for horizontal sync
[    56.172] (II) modeset(0): Using EDID range info for vertical refresh
[    56.172] (II) modeset(0): Printing DDC gathered Modelines:
[    56.172] (II) modeset(0): Modeline "1920x1080"x0.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz eP)
[    56.172] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    56.172] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    56.172] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    56.172] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    56.172] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    56.172] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    56.172] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    56.172] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    56.172] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    56.172] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    56.172] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    56.172] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    56.172] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    56.172] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    57.352] (II) modeset(0): EDID vendor "ACR", prod id 1707
[    57.352] (II) modeset(0): Using hsync ranges from config file
[    57.352] (II) modeset(0): Using vrefresh ranges from config file
[    57.352] (II) modeset(0): Printing DDC gathered Modelines:
[    57.352] (II) modeset(0): Modeline "1920x1080"x0.0  174.50  1920 1968 2000 2080  1080 1083 1088 1119 +hsync -vsync (83.9 kHz eP)
[    57.352] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    57.352] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    57.352] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    57.352] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    57.352] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    57.352] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    57.352] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    57.352] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    57.352] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    57.352] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    57.352] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    57.352] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    57.352] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    57.352] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    57.353] (II) config/udev: removing device Logitech G413 Carbon Mechanical Gaming Keyboard
[    57.353] (**) Option "fd" "30"
[    57.353] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[    57.353] (II) UnloadModule: "libinput"
[    57.353] (II) systemd-logind: releasing fd for 13:67
[    57.354] (II) config/udev: Adding input device Logitech G413 Carbon Mechanical Gaming Keyboard (/dev/input/event3)
[    57.354] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    57.354] (II) Using input driver 'libinput' for 'Logitech G413 Carbon Mechanical Gaming Keyboard'
[    57.355] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
[    57.355] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: always reports core events
[    57.355] (**) Option "Device" "/dev/input/event3"
[    57.356] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    57.356] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    57.356] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[    57.356] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:06:00.1/usb1/1-1/1-1:1.1/0003:046D:C33A.0002/input/input3/event3"
[    57.356] (II) XINPUT: Adding extended input device "Logitech G413 Carbon Mechanical Gaming Keyboard" (type: KEYBOARD, id 9)
[    57.357] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    57.357] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    57.359] (II) config/udev: removing device Logitech G413 Carbon Mechanical Gaming Keyboard
[    57.359] (**) Option "fd" "29"
[    57.359] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[    57.359] (II) UnloadModule: "libinput"
[    57.359] (II) systemd-logind: releasing fd for 13:66
[    57.359] (II) config/udev: Adding input device Logitech G413 Carbon Mechanical Gaming Keyboard (/dev/input/event2)
[    57.359] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[    57.359] (II) Using input driver 'libinput' for 'Logitech G413 Carbon Mechanical Gaming Keyboard'
[    57.360] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
[    57.360] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: always reports core events
[    57.360] (**) Option "Device" "/dev/input/event2"
[    57.361] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    57.361] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    57.361] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[    57.361] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:06:00.1/usb1/1-1/1-1:1.0/0003:046D:C33A.0001/input/input2/event2"
[    57.361] (II) XINPUT: Adding extended input device "Logitech G413 Carbon Mechanical Gaming Keyboard" (type: KEYBOARD, id 8)
[    57.362] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[    57.362] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[    57.363] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/mouse0)
[    57.363] (II) No input driver specified, ignoring this device.
[    57.363] (II) This device may have been added with another device file.
[    57.363] (II) config/udev: removing device Logitech G502 HERO Gaming Mouse Keyboard
[    57.363] (**) Option "fd" "32"
[    57.363] (II) UnloadModule: "libinput"
[    57.363] (II) systemd-logind: not releasing fd for 13:69, still in use
[    57.363] (II) config/udev: removing device Logitech G502 HERO Gaming Mouse Keyboard
[    57.363] (**) Option "fd" "32"
[    57.363] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[    57.363] (II) UnloadModule: "libinput"
[    57.363] (II) systemd-logind: releasing fd for 13:69
[    57.364] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse Keyboard (/dev/input/event5)
[    57.364] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    57.364] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[    57.364] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[    57.364] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[    57.364] (**) Option "Device" "/dev/input/event5"
[    57.365] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    57.365] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[    57.365] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[    57.365] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: needs a virtual subdevice
[    57.365] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb7/7-3/7-3:1.1/0003:046D:C08B.0004/input/input7/event5"
[    57.365] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: MOUSE, id 11)
[    57.366] (**) Option "AccelerationScheme" "none"
[    57.366] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) selected scheme none/0
[    57.366] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[    57.366] (**) Logitech G502 HERO Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[    57.366] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    57.366] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device is a keyboard
[    57.367] (**) Logitech G502 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    57.367] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse Keyboard'
[    57.367] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[    57.367] (**) Logitech G502 HERO Gaming Mouse Keyboard: always reports core events
[    57.367] (**) Option "Device" "/dev/input/event5"
[    57.367] (II) libinput: Logitech G502 HERO Gaming Mouse Keyboard: is a virtual subdevice
[    57.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb7/7-3/7-3:1.1/0003:046D:C08B.0004/input/input7/event5"
[    57.367] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse Keyboard" (type: KEYBOARD, id 12)
[    57.368] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[    57.368] (II) No input driver specified, ignoring this device.
[    57.368] (II) This device may have been added with another device file.
[    57.368] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[    57.368] (II) No input driver specified, ignoring this device.
[    57.368] (II) This device may have been added with another device file.
[    57.369] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event12)
[    57.369] (II) No input driver specified, ignoring this device.
[    57.369] (II) This device may have been added with another device file.
[    57.369] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    57.369] (II) No input driver specified, ignoring this device.
[    57.369] (II) This device may have been added with another device file.
[    57.369] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event15)
[    57.369] (II) No input driver specified, ignoring this device.
[    57.369] (II) This device may have been added with another device file.
[    57.369] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[    57.369] (II) No input driver specified, ignoring this device.
[    57.369] (II) This device may have been added with another device file.
[    57.369] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event14)
[    57.369] (II) No input driver specified, ignoring this device.
[    57.369] (II) This device may have been added with another device file.
[    57.370] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    57.370] (II) No input driver specified, ignoring this device.
[    57.370] (II) This device may have been added with another device file.
[    57.370] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event13)
[    57.370] (II) No input driver specified, ignoring this device.
[    57.370] (II) This device may have been added with another device file.
[    57.370] (II) config/udev: removing device Logitech G502 HERO Gaming Mouse
[    57.370] (**) Option "fd" "31"
[    57.370] (II) event4  - Logitech G502 HERO Gaming Mouse: device removed
[    57.370] (II) UnloadModule: "libinput"
[    57.370] (II) systemd-logind: releasing fd for 13:68
[    57.386] (II) config/udev: Adding input device Logitech G502 HERO Gaming Mouse (/dev/input/event4)
[    57.386] (**) Logitech G502 HERO Gaming Mouse: Applying InputClass "libinput pointer catchall"
[    57.386] (II) Using input driver 'libinput' for 'Logitech G502 HERO Gaming Mouse'
[    57.438] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 31 paused 0
[    57.438] (**) Logitech G502 HERO Gaming Mouse: always reports core events
[    57.438] (**) Option "Device" "/dev/input/event4"
[    57.439] (II) event4  - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[    57.439] (II) event4  - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[    57.439] (II) event4  - Logitech G502 HERO Gaming Mouse: device is a pointer
[    57.439] (II) event4  - Logitech G502 HERO Gaming Mouse: device removed
[    57.439] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    57.439] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    57.439] (II) libinput: Logitech G502 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    57.439] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb7/7-3/7-3:1.0/0003:046D:C08B.0003/input/input6/event4"
[    57.439] (II) XINPUT: Adding extended input device "Logitech G502 HERO Gaming Mouse" (type: MOUSE, id 10)
[    57.439] (**) Option "AccelerationScheme" "none"
[    57.439] (**) Logitech G502 HERO Gaming Mouse: (accel) selected scheme none/0
[    57.439] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration factor: 2.000
[    57.439] (**) Logitech G502 HERO Gaming Mouse: (accel) acceleration threshold: 4
[    57.440] (II) event4  - Logitech G502 HERO Gaming Mouse: is tagged by udev as: Mouse
[    57.440] (II) event4  - Logitech G502 HERO Gaming Mouse: device set to 2400 DPI
[    57.440] (II) event4  - Logitech G502 HERO Gaming Mouse: device is a pointer
[    57.441] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event11)
[    57.441] (II) No input driver specified, ignoring this device.
[    57.441] (II) This device may have been added with another device file.
[   158.601] (**) Option "fd" "34"
[   158.601] (II) event1  - Power Button: device removed
[   158.601] (**) Option "fd" "28"
[   158.601] (II) event0  - Power Button: device removed
[   158.601] (**) Option "fd" "30"
[   158.601] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[   158.601] (**) Option "fd" "29"
[   158.601] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[   158.601] (**) Option "fd" "32"
[   158.601] (**) Option "fd" "32"
[   158.601] (II) event5  - Logitech G502 HERO Gaming Mouse Keyboard: device removed
[   158.601] (**) Option "fd" "31"
[   158.601] (II) event4  - Logitech G502 HERO Gaming Mouse: device removed
[   158.603] (II) UnloadModule: "libinput"
[   158.603] (II) systemd-logind: releasing fd for 13:68
[   158.604] (II) UnloadModule: "libinput"
[   158.604] (II) systemd-logind: not releasing fd for 13:69, still in use
[   158.604] (II) UnloadModule: "libinput"
[   158.604] (II) systemd-logind: releasing fd for 13:69
[   158.604] (II) UnloadModule: "libinput"
[   158.604] (II) systemd-logind: releasing fd for 13:66
[   158.710] (II) UnloadModule: "libinput"
[   158.710] (II) systemd-logind: releasing fd for 13:67
[   158.726] (II) UnloadModule: "libinput"
[   158.726] (II) systemd-logind: releasing fd for 13:64
[   158.726] (II) UnloadModule: "libinput"
[   158.726] (II) systemd-logind: releasing fd for 13:65
[   158.727] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   158.727] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   158.727] (WW) xf86OpenConsole: VT_GETSTATE failed: Input/output error
[   158.727] (II) Server terminated successfully (0). Closing log file.

Offline

#4 2023-06-12 20:53:20

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

That server ran on the modesetting driver on top of nouveau - NOT using the proprietary nvidia driver and on 1920x1080 (and likely 60Hz)
I assume your nvidia installation failed and you're not getting any signal when (failing) starting the display server?

=> Boot the multi-user.target (2nd link below) and as loqs asked, post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'f:1=<-' ix.io

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2023-06-13 01:56:58

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,726

Re: "input not supported" error with latest proprietary nvidia drivers

Did you miss step 5? https://wiki.archlinux.org/title/NVIDIA#Installation

Offline

#6 2023-06-13 02:31:20

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

heres the journal, also, brilliant work with the curl command and ix.io

http://ix.io/4y6K

I should also mention, i tried with another monitor and it actually worked just fine.

Offline

#7 2023-06-13 02:36:54

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,726

Re: "input not supported" error with latest proprietary nvidia drivers

That log is from a different boot. Why did you add nomodset to the kernel command line? What else did you change?

Last edited by Scimmia (2023-06-13 02:39:40)

Offline

#8 2023-06-13 03:00:05

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

i had added nomodeset because i had read online that it could help, that was all i changed though

version without nomodeset - http://ix.io/4y6M

Offline

#9 2023-06-13 03:02:23

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,726

Re: "input not supported" error with latest proprietary nvidia drivers

And the xorg log from that boot?

Offline

#10 2023-06-13 03:06:31

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

i dont even get an xorg log, now I am running the proprietary driver (after removing kms from mkinitcpio), the other Xorg.0.log was from me running xorg under nouveau

Last edited by evfeal (2023-06-13 03:07:58)

Offline

#11 2023-06-13 06:41:00

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

Because you're only booting the multi-user.target.

systemctl start graphical.target

and, since you apparently "forgot" about it, 2nd link below on how to change them.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2023-06-13 14:49:30

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

OK, now booted with the graphical target, here is the Xorg.0.log

ix.io/4y99

Offline

#13 2023-06-13 15:03:09

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,197

Re: "input not supported" error with latest proprietary nvidia drivers

The server starts correctly with the nvidia driver but proceeds to die because it gets no job to run/or the designated job dies immediately. What exactly are you trying to run in the graphical target and what's the journalctl -b from such an attempt?

Offline

#14 2023-06-13 15:07:41

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

That server ran successfully for ~8 seconds on the proprietary nvidia driver w/ 1920x1080 on an "Acer SB220Q"
Do you still get the "input not supprted" message?
If so, while the X11 server is running, switch to a different VT and run 

DISPLAY=:0 xrandr -q | curl -F 'f:1=<-' ix.io

and post the link you get in return.

@V1del, I assume he just killed it if there's a invalid signal at the output, 8 seconds is too long for a broken xinitrc.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2023-06-13 15:16:52

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

im actually unable to switch to a another vt while the "input not supportet" is running, I cant even really kill the X server, I just have to restart my computer, killing the X server (with mod-shift-q because of my dwm keybinding) doesnt do anything.

Offline

#16 2023-06-13 15:22:32

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

Can you ssh into the system?

1. Post your xinitrc
2. add "xrandr -q > ~/xrandr.dump" to your xinitrc and maybe don't then "exec dwm" but let the server terminate immediately (to hopefully return to a functional console)
3. don't enable/start the graphical.target, just run startx/xinit

What is your graphical.target and how do you usually start X11? Some entry in $SHELL_profile? Post that as well.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#17 2023-06-13 15:37:51

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

OK, even though I stopped executing dwm in the xinitrc, I still got input not supported

this is my xrandr - http://ix.io/4y9z
and this is my .xinitrc - https://ix.io/4y9A

Offline

#18 2023-06-13 15:42:33

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

What happens for "xrandr --output HDMI-0 --rate 60; exec dwm"?
Do you have a second monitor or cable at hand (especially cable…)?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#19 2023-06-13 15:49:49

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

using xrandr --ouput HDMI-0 --rate 60; doesnt work, and I dont have any other cables, I tried it with another monitor earlier and it did work though.

Offline

#20 2023-06-13 15:57:35

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

Does the compromised monitor work w/ any other system?

xrandr --output HDMI-0 --mode 1024x768 --rate 60

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#21 2023-06-13 16:00:36

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

seth wrote:

Does the compromised monitor work w/ any other system?

yes, I tried it on a windows machine earlier and it did work, it seems to just have a problem with linux

Offline

#22 2023-06-13 16:05:41

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

… or the specific VGA that generates the signal on this machine.

seth wrote:

Can you ssh into the system?

It would be nice if we could inspect the error live…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#23 2023-06-13 16:05:41

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

xrandr --output HDMI-0 --mode 1024x768 --rate 60

OK! manually specifying the resoultion works, i tried with 1920x1080 and it worked too, any idea what might be causing this?

Offline

#24 2023-06-13 16:11:53

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,664

Re: "input not supported" error with latest proprietary nvidia drivers

Does "xrandr --output HDMI-0 --mode 1920x1080 --rate 75" work?
The monitor edid lists that as 1srt detailed timing and it's used by default and in your xrandr output.
I'd have thought that just altering the rate would be enough, but apparently not?
Does the windows system run the monitor at 75Hz (check the monitor OSD, not windows)?

You can alternatively set that mode w/ nvidias metamode option (the PreferredMode stuff is ignored by the driver) in the "Screen" section hmm

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#25 2023-06-13 16:21:27

evfeal
Member
Registered: 2023-06-12
Posts: 12

Re: "input not supported" error with latest proprietary nvidia drivers

these monitors run at 60Hz, setting it at 1920x1080 and a rate of 60 works for Xorg, so thats all good

running at 75Hz gives me the same "input not supported" message,

the only weird part is that whenever i kill the Xsession, and subsequently go back to tty, then it decides not to work, but its better than before

Offline

Pages: 1 2

Board footer

Powered by FluxBB