You are not logged in.

Pages: 1

#1 2023-06-23 00:08:49

KaelNadir
Member
Registered: 2023-06-07
Posts: 10

[SOLVED] Unable to use pipewire - wireplumber service failed

Downloaded pipewire with wireplumber but it hasn't been set as the sound server.


 systemctl --user status wireplumber
           * wireplumber.service - Multimedia Service Session Manager
                   Loaded: Loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset; enabled)
                   Active: failed (Result: start-limit-hit) since Fri 2023-06-23 05:10:49 IST; 13min ago
              Duration: 48ms
                 Process: 746 ExecStart=/usr/in/wireplumber (code=killed, signal=TERM)
               Main PID: 746 (code=killed, signal=TERM)
                         CPU: 37ms
Jun 23 05:10:48 Archlinux systemd[526]: Started Multimedia Service Session Manager.
Jun 23 05:10:48 Archlinux systemd[526]: Stopping Multimedia Service Session Manager...
Jun 23 05:10:48 Archlinux systemd[526]: Stopped Multimedia Service Session Manager.
Jun 23 05:10:48 Archlinux systemd[526]: wireplumber.service: Start request repeated too quickly.
Jun 23 05:10:48 Archlinux systemd[526]: wireplumber.service: Failed with result 'start-limit-hit'.
Jun 23 05:10:48 Archlinux systemd[526]: Failed to start Multimedia Service Session manager.
Jun 23 05:10:48 Archlinux systemd[526]: Dependency failed for Multimedia Service Session Manager.
Jun 23 05:10:48 Archlinux systemd[526]: wireplumber.service: Job wireplumber.service/start failed with result 'dependency'.
 pactl info
            Connection failure: Connection refused
 inxi -A
      Audio:
           Device-1: Intel 100 Series/C230 Series Family HD Audio driver: snd_hda_intel
           Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
                driver: snd_hda_intel
           API: ALSA v: k6.1.35-1-lts status: kernel-api

Last edited by KaelNadir (2023-06-24 05:48:08)

Offline

#2 2023-06-23 04:03:10

KaelNadir
Member
Registered: 2023-06-07
Posts: 10

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

Is there some software I'm missing?

Offline

#3 2023-06-23 08:03:36

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,081

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

Can you post 

sudo fuser -v /dev/snd/*
pacman -Qs 'wireplumber|pulse|pipewire'

Offline

#4 2023-06-23 09:57:14

KaelNadir
Member
Registered: 2023-06-07
Posts: 10

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

sudo fuser -v /dev/snd/* doesnt give any output


 pacman -Qs 'wireplumber|pulse|pipewire'
local/libcanberra 1:0.30_r2_gc0620e4-3
       A small and lightweight implementation of the XDG Sound Theme Specification
local/libpipewire 1:0.3.71-2
       Low-latency audio/video router and processor - client library
local/libpulse 16.1-6
       A featureful, general-purpose sound server (slient library)
local/libwireplumber 0.4.14-1
       Session / policy manager implementation for PipeWire - client library
local/pavucontrol 1:5.0+r61+gee77d86-2
       PulseAudio Volume Control
local/pipewire 1:0.3.71-2
       Low-latency audio/video router and processor
local/pipewire-alsa 1:0.3.71-2
       Low-latency audio/video router and processor - ALSA configuration
local/pipewire-audio 1:0.3.71-2
       Low-latency audio/video router and processor - Audio configuration
local/pipewire-jack 1:0.3.71-2
       Low-latency audio/video router and processor - JACK configuration
local/pipewire-pulse 1:0.3.71-2
       Low-latency audio/video router and processor - PulseAudio replacement
local/wireplumber 0.4.14-1
       Session / policy manager implementation for Pipewire

Last edited by KaelNadir (2023-06-23 09:59:53)

Offline

#5 2023-06-23 10:21:08

KaelNadir
Member
Registered: 2023-06-07
Posts: 10

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

All files in /etc/pipewire are empty,  and inxi -Fazy shows Pipewire and wireplumber status off

Offline

#6 2023-06-23 11:25:25

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,081

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

/etc/pipewire is supposed to be empty. 

aplay -lL
systemctl --user status wireplumber pipewire{,-pulse,-jack}

Last edited by V1del (2023-06-23 11:25:48)

Offline

#7 2023-06-23 18:44:11

KaelNadir
Member
Registered: 2023-06-07
Posts: 10

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

 
~
❯ aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
pipewire
    PipeWire Sound Server
default
    Default ALSA Output (currently PipeWire Media Server)
front:CARD=PCH
    Front output / input
surround21:CARD=PCH
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA ATI HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA ATI HDMI, HDMI 4
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
    HDA ATI HDMI, HDMI 5
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=6
    HDA ATI HDMI, HDMI 6
    HDMI Audio Output
**** List of PLAYBACK Hardware Devices ****
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 12: HDMI 6 [HDMI 6]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
systemctl --user status wireplumber pipewire{,-pulse,-jack}
Unit pipewire-jack.service could not be found.
○ wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: inactive (dead) since Fri 2023-06-23 15:34:38 IST; 8h ago
   Duration: 49ms
   Main PID: 662 (code=killed, signal=TERM)
        CPU: 38ms

Jun 23 15:34:38 Archlinux systemd[444]: Started Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: Stopping Multimedia Service Session Manager...
Jun 23 15:34:38 Archlinux systemd[444]: Stopped Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: Dependency failed for Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: wireplumber.service: Job wireplumber.service/start failed with resul>

× pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: failed (Result: exit-code) since Fri 2023-06-23 15:34:38 IST; 8h ago
   Duration: 52ms
Unit pipewire-jack.service could not be found.
Unit pipewire-jack.service could not be found.
○ wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: inactive (dead) since Fri 2023-06-23 15:34:38 IST; 8h ago
   Duration: 49ms
   Main PID: 662 (code=killed, signal=TERM)
        CPU: 38ms

Jun 23 15:34:38 Archlinux systemd[444]: Started Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: Stopping Multimedia Service Session Manager...
Jun 23 15:34:38 Archlinux systemd[444]: Stopped Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: Dependency failed for Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: wireplumber.service: Job wireplumber.service/start failed with resul>

× pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: failed (Result: exit-code) since Fri 2023-06-23 15:34:38 IST; 8h ago
   Duration: 52ms
TriggeredBy: × pipewire.socket
   Main PID: 661 (code=exited, status=254)
        CPU: 40ms

Jun 23 15:34:38 Archlinux systemd[444]: pipewire.service: Scheduled restart job, restart counter is at 4.
Jun 23 15:34:38 Archlinux systemd[444]: Stopped PipeWire Multimedia Service.
Jun 23 15:34:38 Archlinux systemd[444]: pipewire.service: Start request repeated too quickly.
Jun 23 15:34:38 Archlinux systemd[444]: pipewire.service: Failed with result 'exit-code'.
Jun 23 15:34:38 Archlinux systemd[444]: Failed to start PipeWire Multimedia Service.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; disabled; preset: enabled)
     Active: active (running) since Fri 2023-06-23 15:34:37 IST; 8h ago
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 643 (pipewire-pulse)
      Tasks: 2 (limit: 23821)
     Memory: 2.2M
        CPU: 41ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─643 /usr/bin/pipewire-pulse

Jun 23 15:34:37 Archlinux systemd[444]: Started PipeWire PulseAudio.
Jun 23 15:37:45 Archlinux pipewire-pulse[643]: mod.protocol-pulse: 0x555abc222980: failed to connect client:>
Jun 23 15:37:45 Archlinux pipewire-pulse[643]: mod.protocol-pulse: client 0x555abc23f140 [Firefox]: ERROR co>
Jun 23 15:40:28 Archlinux pipewire-pulse[643]: mod.protocol-pulse: 0x555abc222980: failed to connect client:>
Jun 23 15:40:28 Archlinux pipewire-pulse[643]: mod.protocol-pulse: client 0x555abc254670 [Firefox]: ERROR co>
~
~
~
~
~
~
~
~
~
~
~
lines 1-44/44 (END)...skipping...
Unit pipewire-jack.service could not be found.
○ wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: inactive (dead) since Fri 2023-06-23 15:34:38 IST; 8h ago
   Duration: 49ms
   Main PID: 662 (code=killed, signal=TERM)
        CPU: 38ms

Jun 23 15:34:38 Archlinux systemd[444]: Started Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: Stopping Multimedia Service Session Manager...
Jun 23 15:34:38 Archlinux systemd[444]: Stopped Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: Dependency failed for Multimedia Service Session Manager.
Jun 23 15:34:38 Archlinux systemd[444]: wireplumber.service: Job wireplumber.service/start failed with result 'dependency'.

× pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: failed (Result: exit-code) since Fri 2023-06-23 15:34:38 IST; 8h ago
   Duration: 52ms
TriggeredBy: × pipewire.socket
   Main PID: 661 (code=exited, status=254)
        CPU: 40ms

Jun 23 15:34:38 Archlinux systemd[444]: pipewire.service: Scheduled restart job, restart counter is at 4.
Jun 23 15:34:38 Archlinux systemd[444]: Stopped PipeWire Multimedia Service.
Jun 23 15:34:38 Archlinux systemd[444]: pipewire.service: Start request repeated too quickly.
Jun 23 15:34:38 Archlinux systemd[444]: pipewire.service: Failed with result 'exit-code'.
Jun 23 15:34:38 Archlinux systemd[444]: Failed to start PipeWire Multimedia Service.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; disabled; preset: enabled)
     Active: active (running) since Fri 2023-06-23 15:34:37 IST; 8h ago
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 643 (pipewire-pulse)
      Tasks: 2 (limit: 23821)
     Memory: 2.2M
        CPU: 41ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─643 /usr/bin/pipewire-pulse

Jun 23 15:34:37 Archlinux systemd[444]: Started PipeWire PulseAudio.
Jun 23 15:37:45 Archlinux pipewire-pulse[643]: mod.protocol-pulse: 0x555abc222980: failed to connect client: Host is down
Jun 23 15:37:45 Archlinux pipewire-pulse[643]: mod.protocol-pulse: client 0x555abc23f140 [Firefox]: ERROR command:9 (SET_CLIENT_NAME) tag:1 error:6 (Host is down)
Jun 23 15:40:28 Archlinux pipewire-pulse[643]: mod.protocol-pulse: 0x555abc222980: failed to connect client: Host is down
Jun 23 15:40:28 Archlinux pipewire-pulse[643]: mod.protocol-pulse: client 0x555abc254670 [Firefox]: ERROR command:9 (SET_CLIENT_NAME) tag:1 error:6 (Host is down)
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-44/44 (END)

Last edited by KaelNadir (2023-06-23 18:44:55)

Offline

#8 2023-06-24 05:47:49

KaelNadir
Member
Registered: 2023-06-07
Posts: 10

Re: [SOLVED] Unable to use pipewire - wireplumber service failed

I'm running hyprland on arch and I did another reinstall to try and fix it and this time I installed sddm before hyprland and it works. I dont know why but it's the only thing I did different than previous installs. Maybe someone could explain but issue is solved for me. Thanks V1del anyways

Last edited by KaelNadir (2023-06-24 05:48:48)

Offline

Pages: 1

Board footer

Powered by FluxBB