You are not logged in.
- Topics: Active | Unanswered
#1 2023-06-27 00:09:41
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Can login but no desktop [SOLVED]
I'm using i3 with sddm. Last night everything was well and good but today as I log in I noticed that i3 would not load.
After trying all kind of things I figured it was something related to my default user, so I created a new user and that user was OK to log in. But of course, did not have the i3 configuration I had... so I figured that if there was some sort of corruption of the default user I could delete the user, re-create it again assign it to the same old directory and everything would be good and I would go may marry way ... but nope.
Even when I assign all the rights to the re-created user it does not work. Same problem as before.
Any ideas to troubleshoot this issue would be appreciated.
Thanks!
Last edited by ralvez (2023-07-06 12:07:17)
Offline
#2 2023-06-27 00:43:34
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,456
- Website
Re: Can login but no desktop [SOLVED]
Xorg log, sddm log, journal ... anything.
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#3 2023-06-27 01:54:08
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@Trilby
Thanks for your reply.
BTW the default user is ralvez uid:1000
The test user I added was alvez just in case it helps.
I did notice that Albert fails to load in the logs but I do not think it has anything to do with the problem at hand.
journalctl
Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
Pass -q to turn off this notice.
Jun 26 12:23:08 dragonfly systemd-xdg-autostart-generator[771]: /home/ralvez/.config/autostart/albert.d>
Jun 26 12:23:08 dragonfly systemd[766]: Queued start job for default target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Created slice User Application Slice.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Paths.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Timers.
Jun 26 12:23:08 dragonfly systemd[766]: Starting D-Bus User Message Bus Socket...
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG network certificate management daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GCR ssh-agent wrapper.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GNOME Keyring daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (ac>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (re>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on p11-kit server.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on PipeWire Multimedia System Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on Sound System.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on D-Bus User Message Bus Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Sockets.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Basic System.
Jun 26 12:23:08 dragonfly systemd[766]: Starting Update XDG user dir configuration...
Jun 26 12:23:08 dragonfly systemd[766]: Finished Update XDG user dir configuration.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Startup finished in 78ms.
Jun 26 12:23:08 dragonfly systemd[766]: Started GNOME Keyring daemon.
Jun 26 12:23:09 dragonfly gnome-keyring-daemon[777]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring
Jun 26 12:23:09 dragonfly systemd[766]: Created slice User Core Session Slice.
Jun 26 12:23:09 dragonfly systemd[766]: Starting D-Bus User Message Bus...
Jun 26 12:23:09 dragonfly systemd[766]: Started D-Bus User Message Bus.
Jun 26 12:23:09 dragonfly sddm-helper[785]: pam_kwallet5: final socket path: /run/user/1000/kwallet5.so>
Jun 26 12:23:23 dragonfly systemd[766]: Activating special unit Exit the Session...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Main User Target.
Jun 26 12:23:23 dragonfly systemd[766]: Stopping D-Bus User Message Bus...
Jun 26 12:23:23 dragonfly systemd[766]: Stopping GNOME Keyring daemon...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped D-Bus User Message Bus.
Jun 26 12:23:23 dragonfly systemd[766]: Removed slice User Core Session Slice.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Basic System.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Paths.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Sockets.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Timers.
Jun 26 12:23:23 dragonfly systemd[766]: Closed D-Bus User Message Bus Socket.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG network certificate management daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GCR ssh-agent wrapper.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (access f>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (restrict>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache.
ESCOC
rator[771]: /home/ralvez/.config/autostart/albert.desktop: stat() failed, ignoring: No such file or dir>
job for default target Main User Target.
e User Application Slice.
et Paths.
et Timers.
us User Message Bus Socket...
GnuPG network certificate management daemon.
GCR ssh-agent wrapper.
GNOME Keyring daemon.
GnuPG cryptographic agent and passphrase cache (access for web browsers).
GnuPG cryptographic agent and passphrase cache (restricted).
GnuPG cryptographic agent (ssh-agent emulation).
GnuPG cryptographic agent and passphrase cache.
p11-kit server.
PipeWire Multimedia System Socket.
Sound System.
D-Bus User Message Bus Socket.
et Sockets.
et Basic System.
ate XDG user dir configuration...
ate XDG user dir configuration.
et Main User Target.
shed in 78ms.
E Keyring daemon.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring
e User Core Session Slice.
us User Message Bus...
s User Message Bus.
let5: final socket path: /run/user/1000/kwallet5.socket
pecial unit Exit the Session...
et Main User Target.
us User Message Bus...
ME Keyring daemon...
E Keyring daemon.
s User Message Bus.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
cryptographic agent and passphrase cache (access for web browsers).
cryptographic agent and passphrase cache (restricted).
cryptographic agent (ssh-agent emulation).
cryptographic agent and passphrase cache.
ESCOD
Jun 26 12:23:08 dragonfly systemd-xdg-autostart-generator[771]: /home/ralvez/.config/autostart/albert.d>
Jun 26 12:23:08 dragonfly systemd[766]: Queued start job for default target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Created slice User Application Slice.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Paths.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Timers.
Jun 26 12:23:08 dragonfly systemd[766]: Starting D-Bus User Message Bus Socket...
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG network certificate management daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GCR ssh-agent wrapper.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GNOME Keyring daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (ac>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (re>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on p11-kit server.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on PipeWire Multimedia System Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on Sound System.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on D-Bus User Message Bus Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Sockets.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Basic System.
Jun 26 12:23:08 dragonfly systemd[766]: Starting Update XDG user dir configuration...
Jun 26 12:23:08 dragonfly systemd[766]: Finished Update XDG user dir configuration.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Startup finished in 78ms.
Jun 26 12:23:08 dragonfly systemd[766]: Started GNOME Keyring daemon.
Jun 26 12:23:09 dragonfly gnome-keyring-daemon[777]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring
Jun 26 12:23:09 dragonfly systemd[766]: Created slice User Core Session Slice.
Jun 26 12:23:09 dragonfly systemd[766]: Starting D-Bus User Message Bus...
Jun 26 12:23:09 dragonfly systemd[766]: Started D-Bus User Message Bus.
Jun 26 12:23:09 dragonfly sddm-helper[785]: pam_kwallet5: final socket path: /run/user/1000/kwallet5.so>
Jun 26 12:23:23 dragonfly systemd[766]: Activating special unit Exit the Session...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Main User Target.
Jun 26 12:23:23 dragonfly systemd[766]: Stopping D-Bus User Message Bus...
Jun 26 12:23:23 dragonfly systemd[766]: Stopping GNOME Keyring daemon...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped D-Bus User Message Bus.
Jun 26 12:23:23 dragonfly systemd[766]: Removed slice User Core Session Slice.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Basic System.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Paths.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Sockets.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Timers.
Jun 26 12:23:23 dragonfly systemd[766]: Closed D-Bus User Message Bus Socket.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG network certificate management daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GCR ssh-agent wrapper.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (access f>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (restrict>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache.
ESCOC
rator[771]: /home/ralvez/.config/autostart/albert.desktop: stat() failed, ignoring: No such file or dir>
job for default target Main User Target.
e User Application Slice.
et Paths.
et Timers.
us User Message Bus Socket...
GnuPG network certificate management daemon.
GCR ssh-agent wrapper.
GNOME Keyring daemon.
GnuPG cryptographic agent and passphrase cache (access for web browsers).
GnuPG cryptographic agent and passphrase cache (restricted).
GnuPG cryptographic agent (ssh-agent emulation).
GnuPG cryptographic agent and passphrase cache.
p11-kit server.
PipeWire Multimedia System Socket.
Sound System.
D-Bus User Message Bus Socket.
et Sockets.
et Basic System.
ate XDG user dir configuration...
ate XDG user dir configuration.
et Main User Target.
shed in 78ms.
E Keyring daemon.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring
e User Core Session Slice.
us User Message Bus...
s User Message Bus.
let5: final socket path: /run/user/1000/kwallet5.socket
pecial unit Exit the Session...
et Main User Target.
us User Message Bus...
ME Keyring daemon...
E Keyring daemon.
s User Message Bus.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
cryptographic agent and passphrase cache (access for web browsers).
cryptographic agent and passphrase cache (restricted).
cryptographic agent (ssh-agent emulation).
cryptographic agent and passphrase cache.
it server.
ESCOD
Jun 26 12:23:08 dragonfly systemd[766]: Queued start job for default target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Created slice User Application Slice.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Paths.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Timers.
Jun 26 12:23:08 dragonfly systemd[766]: Starting D-Bus User Message Bus Socket...
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG network certificate management daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GCR ssh-agent wrapper.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GNOME Keyring daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (ac>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (re>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on p11-kit server.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on PipeWire Multimedia System Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on Sound System.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on D-Bus User Message Bus Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Sockets.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Basic System.
Jun 26 12:23:08 dragonfly systemd[766]: Starting Update XDG user dir configuration...
Jun 26 12:23:08 dragonfly systemd[766]: Finished Update XDG user dir configuration.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Startup finished in 78ms.
Jun 26 12:23:08 dragonfly systemd[766]: Started GNOME Keyring daemon.
Jun 26 12:23:09 dragonfly gnome-keyring-daemon[777]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring
Jun 26 12:23:09 dragonfly systemd[766]: Created slice User Core Session Slice.
Jun 26 12:23:09 dragonfly systemd[766]: Starting D-Bus User Message Bus...
Jun 26 12:23:09 dragonfly systemd[766]: Started D-Bus User Message Bus.
Jun 26 12:23:09 dragonfly sddm-helper[785]: pam_kwallet5: final socket path: /run/user/1000/kwallet5.so>
Jun 26 12:23:23 dragonfly systemd[766]: Activating special unit Exit the Session...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Main User Target.
Jun 26 12:23:23 dragonfly systemd[766]: Stopping D-Bus User Message Bus...
Jun 26 12:23:23 dragonfly systemd[766]: Stopping GNOME Keyring daemon...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped D-Bus User Message Bus.
Jun 26 12:23:23 dragonfly systemd[766]: Removed slice User Core Session Slice.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Basic System.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Paths.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Sockets.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Timers.
Jun 26 12:23:23 dragonfly systemd[766]: Closed D-Bus User Message Bus Socket.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG network certificate management daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GCR ssh-agent wrapper.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (access f>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (restrict>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache.
Jun 26 12:23:23 dragonfly systemd[766]: Closed p11-kit server.
ESCOD
Jun 26 12:23:08 dragonfly systemd[766]: Queued start job for default target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Created slice User Application Slice.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Paths.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Timers.
Jun 26 12:23:08 dragonfly systemd[766]: Starting D-Bus User Message Bus Socket...
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG network certificate management daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GCR ssh-agent wrapper.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GNOME Keyring daemon.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (ac>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache (re>
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:08 dragonfly systemd[766]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on p11-kit server.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on PipeWire Multimedia System Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on Sound System.
Jun 26 12:23:08 dragonfly systemd[766]: Listening on D-Bus User Message Bus Socket.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Sockets.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Basic System.
Jun 26 12:23:08 dragonfly systemd[766]: Starting Update XDG user dir configuration...
Jun 26 12:23:08 dragonfly systemd[766]: Finished Update XDG user dir configuration.
Jun 26 12:23:08 dragonfly systemd[766]: Reached target Main User Target.
Jun 26 12:23:08 dragonfly systemd[766]: Startup finished in 78ms.
Jun 26 12:23:08 dragonfly systemd[766]: Started GNOME Keyring daemon.
Jun 26 12:23:09 dragonfly gnome-keyring-daemon[777]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring
Jun 26 12:23:09 dragonfly systemd[766]: Created slice User Core Session Slice.
Jun 26 12:23:09 dragonfly systemd[766]: Starting D-Bus User Message Bus...
Jun 26 12:23:09 dragonfly systemd[766]: Started D-Bus User Message Bus.
Jun 26 12:23:09 dragonfly sddm-helper[785]: pam_kwallet5: final socket path: /run/user/1000/kwallet5.so>
Jun 26 12:23:23 dragonfly systemd[766]: Activating special unit Exit the Session...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Main User Target.
Jun 26 12:23:23 dragonfly systemd[766]: Stopping D-Bus User Message Bus...
Jun 26 12:23:23 dragonfly systemd[766]: Stopping GNOME Keyring daemon...
Jun 26 12:23:23 dragonfly systemd[766]: Stopped GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped D-Bus User Message Bus.
Jun 26 12:23:23 dragonfly systemd[766]: Removed slice User Core Session Slice.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Basic System.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Paths.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Sockets.
Jun 26 12:23:23 dragonfly systemd[766]: Stopped target Timers.
Jun 26 12:23:23 dragonfly systemd[766]: Closed D-Bus User Message Bus Socket.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG network certificate management daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GCR ssh-agent wrapper.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GNOME Keyring daemon.
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (access f>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache (restrict>
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:23:23 dragonfly systemd[766]: Closed GnuPG cryptographic agent and passphrase cache.
Jun 26 12:23:23 dragonfly systemd[766]: Closed p11-kit server.
Jun 26 12:23:23 dragonfly systemd[766]: Closed PipeWire Multimedia System Socket.
Jun 26 12:23:23 dragonfly systemd[766]: Closed Sound System.
Jun 26 12:23:23 dragonfly systemd[766]: Removed slice User Application Slice.
Jun 26 12:23:23 dragonfly systemd[766]: Reached target Shutdown.
Jun 26 12:23:23 dragonfly systemd[766]: Finished Exit the Session.
Jun 26 12:23:23 dragonfly systemd[766]: Reached target Exit the Session.
Jun 26 12:23:23 dragonfly (sd-pam)[767]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flag>
-- Boot 60401f5ceda64866bf12130b9342af69 --
Jun 26 12:24:30 dragonfly systemd-xdg-autostart-generator[759]: /home/ralvez/.config/autostart/albert.d>
Jun 26 12:24:30 dragonfly systemd[754]: Queued start job for default target Main User Target.
Jun 26 12:24:30 dragonfly systemd[754]: Created slice User Application Slice.
Jun 26 12:24:30 dragonfly systemd[754]: Reached target Paths.
Jun 26 12:24:30 dragonfly systemd[754]: Reached target Timers.
Jun 26 12:24:30 dragonfly systemd[754]: Starting D-Bus User Message Bus Socket...
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GnuPG network certificate management daemon.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GCR ssh-agent wrapper.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GNOME Keyring daemon.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GnuPG cryptographic agent and passphrase cache (ac>
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GnuPG cryptographic agent and passphrase cache (re>
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 12:24:30 dragonfly systemd[754]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on p11-kit server.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on PipeWire Multimedia System Socket.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on Sound System.
Jun 26 12:24:30 dragonfly systemd[754]: Listening on D-Bus User Message Bus Socket.
Jun 26 12:24:30 dragonfly systemd[754]: Reached target Sockets.
Jun 26 12:24:30 dragonfly systemd[754]: Reached target Basic System.
Jun 26 12:24:30 dragonfly systemd[754]: Starting Update XDG user dir configuration...
Jun 26 12:24:30 dragonfly systemd[754]: Finished Update XDG user dir configuration.
Jun 26 12:24:30 dragonfly systemd[754]: Reached target Main User Target.
Jun 26 12:24:30 dragonfly systemd[754]: Startup finished in 108ms.
Jun 26 12:24:30 dragonfly systemd[754]: Started GNOME Keyring daemon.
Jun 26 12:24:30 dragonfly gnome-keyring-daemon[765]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring
Jun 26 12:24:30 dragonfly systemd[754]: Created slice User Core Session Slice.
Jun 26 12:24:30 dragonfly systemd[754]: Starting D-Bus User Message Bus...
Jun 26 12:24:30 dragonfly systemd[754]: Started D-Bus User Message Bus.
Jun 26 12:24:30 dragonfly sddm-helper[773]: pam_kwallet5: final socket path: /run/user/1000/kwallet5.so>
Jun 26 13:07:03 dragonfly systemd[754]: Activating special unit Exit the Session...
Jun 26 13:07:03 dragonfly systemd[754]: Stopped target Main User Target.
Jun 26 13:07:03 dragonfly (sd-pam)[755]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flag>
Jun 26 13:07:03 dragonfly systemd[754]: Stopping D-Bus User Message Bus...
Jun 26 13:07:03 dragonfly systemd[754]: Stopping GNOME Keyring daemon...
Jun 26 13:07:03 dragonfly systemd[754]: Stopped D-Bus User Message Bus.
Jun 26 13:07:03 dragonfly systemd[754]: Stopped GNOME Keyring daemon.
Jun 26 13:07:03 dragonfly systemd[754]: Removed slice User Core Session Slice.
Jun 26 13:07:03 dragonfly systemd[754]: Stopped target Basic System.
Jun 26 13:07:03 dragonfly systemd[754]: Stopped target Paths.
Jun 26 13:07:03 dragonfly systemd[754]: Stopped target Sockets.
Jun 26 13:07:03 dragonfly systemd[754]: Stopped target Timers.
Jun 26 13:07:03 dragonfly systemd[754]: Closed D-Bus User Message Bus Socket.
Jun 26 13:07:03 dragonfly systemd[754]: Closed GnuPG network certificate management daemon.
Jun 26 13:07:03 dragonfly systemd[754]: Closed GCR ssh-agent wrapper.
Jun 26 13:07:03 dragonfly systemd[754]: Closed GNOME Keyring daemon.
Jun 26 13:07:03 dragonfly systemd[754]: Closed GnuPG cryptographic agent and passphrase cache (access f>
Jun 26 13:07:03 dragonfly systemd[754]: Closed GnuPG cryptographic agent and passphrase cache (restrict>
Jun 26 13:07:03 dragonfly systemd[754]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Jun 26 13:07:03 dragonfly systemd[754]: Closed GnuPG cryptographic agent and passphrase cache.
Jun 26 13:07:03 dragonfly systemd[754]: Closed p11-kit server.
Jun 26 13:07:03 dragonfly systemd[754]: Closed PipeWire Multimedia System Socket.
Jun 26 13:07:03 dragonfly systemd[754]: Closed Sound System.
Jun 26 13:07:03 dragonfly systemd[754]: Removed slice User Application Slice.
Jun 26 13:07:03 dragonfly systemd[754]: Reached target Shutdown.
Jun 26 13:07:03 dragonfly systemd[754]: Finished Exit the Session.
Jun 26 13:07:03 dragonfly systemd[754]: Reached target Exit the Session.
-- Boot 550e7c966fc94e16877e21b8b71ef83c --
Jun 26 13:40:54 dragonfly sudo[1570]: pam_systemd_home(sudo:account): systemd-homed is not available: U>
Jun 26 13:40:54 dragonfly sudo[1570]: ralvez : TTY=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COM>
Jun 26 13:40:54 dragonfly sudo[1570]: pam_unix(sudo:session): session opened for user root(uid=0) by ro>
Jun 26 13:40:55 dragonfly sudo[1570]: pam_unix(sudo:session): session closed for user root
Jun 26 13:41:04 dragonfly sudo[1596]: pam_systemd_home(sudo:account): systemd-homed is not available: U>
Jun 26 13:41:04 dragonfly sudo[1596]: ralvez : TTY=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COM>
Jun 26 13:41:04 dragonfly sudo[1596]: pam_unix(sudo:session): session opened for user root(uid=0) by ro>
Jun 26 13:41:16 dragonfly sudo[1596]: pam_unix(sudo:session): session closed for user root
Jun 26 13:41:29 dragonfly sudo[1810]: pam_systemd_home(sudo:account): systemd-homed is not available: U>
Jun 26 13:41:29 dragonfly sudo[1810]: ralvez : TTY=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COM>
Jun 26 13:41:29 dragonfly sudo[1810]: pam_unix(sudo:session): session opened for user root(uid=0) by ro>
Jun 26 13:41:30 dragonfly sudo[1810]: pam_unix(sudo:session): session closed for user root
Jun 26 13:42:05 dragonfly sudo[5298]: pam_systemd_home(sudo:account): systemd-homed is not available: U>
Jun 26 13:42:05 dragonfly sudo[5298]: ralvez : TTY=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COM>
Jun 26 13:42:05 dragonfly sudo[5298]: pam_unix(sudo:session): session opened for user root(uid=0) by ro>
Jun 26 13:42:05 dragonfly sudo[5298]: pam_unix(sudo:session): session closed for user root
-- Boot e124b9400d8f4f83809501efedf4b621 --
Jun 26 13:49:47 dragonfly systemd-xdg-autostart-generator[786]: /home/ralvez/.config/autostart/albert.d>
Jun 26 13:49:47 dragonfly systemd[781]: Queued start job for default target Main User Target.
Jun 26 13:49:48 dragonfly systemd[781]: Created slice User Application Slice.
Jun 26 13:49:48 dragonfly systemd[781]: Reached target Paths.
Jun 26 13:49:48 dragonfly systemd[781]: Reached target Timers.
Jun 26 13:49:48 dragonfly systemd[781]: Starting D-Bus User Message Bus Socket...
Jun 26 13:49:48 dragonfly systemd[781]: Listening on GnuPG network certificate management daemon.
Jun 26 13:49:48 dragonfly systemd[781]: Listening on GCR ssh-agent wrapper.
Jun 26 13:49:48 dragonfly systemd[781]: Listening on GNOME Keyring daemon.
ESCOC
E Keyring daemon.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
cryptographic agent and passphrase cache (access for web browsers).
cryptographic agent and passphrase cache (restricted).
cryptographic agent (ssh-agent emulation).
cryptographic agent and passphrase cache.
it server.
ire Multimedia System Socket.
System.
e User Application Slice.
et Shutdown.
t the Session.
et Exit the Session.
me(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COMMAND=/usr/bin/pacman -Syy
session): session opened for user root(uid=0) by root(uid=1000)
session): session closed for user root
me(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COMMAND=/usr/bin/pacman -Syu
session): session opened for user root(uid=0) by root(uid=1000)
session): session closed for user root
me(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COMMAND=/usr/bin/pacman --sync -y -u --
session): session opened for user root(uid=0) by root(uid=1000)
session): session closed for user root
me(sudo:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
=pts/1 ; PWD=/home/ralvez/.config ; USER=root ; COMMAND=/usr/bin/pacman --upgrade --noconfirm -- /home/>
session): session opened for user root(uid=0) by root(uid=1000)
session): session closed for user root
rator[786]: /home/ralvez/.config/autostart/albert.desktop: stat() failed, ignoring: No such file or dir>
job for default target Main User Target.
e User Application Slice.
et Paths.
et Timers.
us User Message Bus Socket...
GnuPG network certificate management daemon.
GCR ssh-agent wrapper.
GNOME Keyring daemon.
GnuPG cryptographic agent and passphrase cache (access for web browsers).
GnuPG cryptographic agent and passphrase cache (restricted).
GnuPG cryptographic agent (ssh-agent emulation).
GnuPG cryptographic agent and passphrase cache.
p11-kit server.
PipeWire Multimedia System Socket.
Sound System.
D-Bus User Message Bus Socket.
et Sockets.
et Basic System.
ate XDG user dir configuration...
ate XDG user dir configuration.
et Main User Target.
shed in 199ms.
E Keyring daemon.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring
e User Core Session Slice.
us User Message Bus...
s User Message Bus.
let5: final socket path: /run/user/1000/kwallet5.socket
pecial unit Exit the Session...
et Main User Target.
us User Message Bus...
ME Keyring daemon...
E Keyring daemon.
s User Message Bus.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
cryptographic agent and passphrase cache (access for web browsers).
cryptographic agent and passphrase cache (restricted).
cryptographic agent (ssh-agent emulation).
cryptographic agent and passphrase cache.
it server.
ire Multimedia System Socket.
System.
e User Application Slice.
et Shutdown.
t the Session.
et Exit the Session.
stemd-user:setcred): function=[pam_sm_setcred] flags=0x8004 service=[systemd-user] terminal=[] user=[ra>
rator[776]: /home/ralvez/.config/autostart/albert.desktop: stat() failed, ignoring: No such file or dir>
job for default target Main User Target.
e User Application Slice.
et Paths.
et Timers.
us User Message Bus Socket...
GnuPG network certificate management daemon.
GCR ssh-agent wrapper.
GNOME Keyring daemon.
GnuPG cryptographic agent and passphrase cache (access for web browsers).
GnuPG cryptographic agent and passphrase cache (restricted).
GnuPG cryptographic agent (ssh-agent emulation).
GnuPG cryptographic agent and passphrase cache.
p11-kit server.
PipeWire Multimedia System Socket.
Sound System.
D-Bus User Message Bus Socket.
et Sockets.
et Basic System.
ate XDG user dir configuration...
ate XDG user dir configuration.
et Main User Target.
shed in 105ms.
E Keyring daemon.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring
e User Core Session Slice.
us User Message Bus...
s User Message Bus.
let5: final socket path: /run/user/1000/kwallet5.socket
pecial unit Exit the Session...
et Main User Target.
us User Message Bus...
ME Keyring daemon...
E Keyring daemon.
s User Message Bus.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
rator[771]: /home/ralvez/.config/autostart/albert.desktop: stat() failed, ignoring: No such file or dir>
job for default target Main User Target.
e User Application Slice.
et Paths.
et Timers.
us User Message Bus Socket...
GnuPG network certificate management daemon.
GCR ssh-agent wrapper.
GNOME Keyring daemon.
GnuPG cryptographic agent and passphrase cache (access for web browsers).
GnuPG cryptographic agent and passphrase cache (restricted).
GnuPG cryptographic agent (ssh-agent emulation).
GnuPG cryptographic agent and passphrase cache.
p11-kit server.
PipeWire Multimedia System Socket.
Sound System.
D-Bus User Message Bus Socket.
et Sockets.
et Basic System.
ate XDG user dir configuration...
ate XDG user dir configuration.
et Main User Target.
shed in 78ms.
E Keyring daemon.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring
e User Core Session Slice.
us User Message Bus...
s User Message Bus.
let5: final socket path: /run/user/1000/kwallet5.socket
pecial unit Exit the Session...
et Main User Target.
us User Message Bus...
ME Keyring daemon...
E Keyring daemon.
s User Message Bus.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
cryptographic agent and passphrase cache (access for web browsers).
cryptographic agent and passphrase cache (restricted).
cryptographic agent (ssh-agent emulation).
cryptographic agent and passphrase cache.
...skipping...
rator[771]: /home/ralvez/.config/autostart/albert.desktop: stat() failed, ignoring: No such file or dir>
job for default target Main User Target.
e User Application Slice.
et Paths.
et Timers.
us User Message Bus Socket...
GnuPG network certificate management daemon.
GCR ssh-agent wrapper.
GNOME Keyring daemon.
GnuPG cryptographic agent and passphrase cache (access for web browsers).
GnuPG cryptographic agent and passphrase cache (restricted).
GnuPG cryptographic agent (ssh-agent emulation).
GnuPG cryptographic agent and passphrase cache.
p11-kit server.
PipeWire Multimedia System Socket.
Sound System.
D-Bus User Message Bus Socket.
et Sockets.
et Basic System.
ate XDG user dir configuration...
ate XDG user dir configuration.
et Main User Target.
shed in 78ms.
E Keyring daemon.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring
e User Core Session Slice.
us User Message Bus...
s User Message Bus.
let5: final socket path: /run/user/1000/kwallet5.socket
pecial unit Exit the Session...
et Main User Target.
us User Message Bus...
ME Keyring daemon...
E Keyring daemon.
s User Message Bus.
e User Core Session Slice.
et Basic System.
et Paths.
et Sockets.
et Timers.
User Message Bus Socket.
network certificate management daemon.
sh-agent wrapper.
Keyring daemon.
cryptographic agent and passphrase cache (access for web browsers).
cryptographic agent and passphrase cache (restricted).
cryptographic agent (ssh-agent emulation).
cryptographic agent and passphrase cache.sddm.log
[22:14:01.656] (II) DAEMON: Initializing...
[22:14:01.658] (II) DAEMON: Starting...
[22:14:01.658] (II) DAEMON: Logind interface found
[22:14:01.659] (II) DAEMON: Adding new display on vt 1 ...
[22:14:01.659] (II) DAEMON: Loading theme configuration from ""
[22:14:01.659] (II) DAEMON: Display server starting...
[22:14:01.659] (II) DAEMON: Adding cookie to "/var/run/sddm/{67108377-2101-45e0-8769-4be0069ade62}"
[22:14:01.664] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -background none -seat seat0 vt1 -auth /var/run/sddm/{67108377-2101-45e0-8769-4be0069ade62} -noreset -displayfd 17
[22:14:04.060] (II) DAEMON: Setting default cursor
[22:14:04.122] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup"
[22:14:04.128] (II) DAEMON: Display server started.
[22:14:04.128] (II) DAEMON: Socket server starting...
[22:14:04.129] (II) DAEMON: Socket server started.
[22:14:04.129] (II) DAEMON: Loading theme configuration from ""
[22:14:04.129] (II) DAEMON: Greeter starting...
[22:14:04.162] (II) DAEMON: Greeter session started successfully
[22:14:04.205] (II) DAEMON: Message received from greeter: Connect
[22:14:14.244] (II) DAEMON: Message received from greeter: PowerOff
[22:14:14.284] (WW) DAEMON: Signal received: SIGTERM
[22:14:14.284] (II) DAEMON: Greeter stopping...
[22:14:14.284] (II) DAEMON: Socket server stopping...
[22:14:14.284] (II) DAEMON: Socket server stopped.
[22:14:14.284] (II) DAEMON: Display server stopping...
[22:14:15.009] (II) DAEMON: Display server stopped.
[22:14:15.009] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop"
[22:14:15.010] (II) DAEMON: Greeter stopping...
[22:14:15.010] (WW) DAEMON: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
[20:29:11.458] (II) DAEMON: Initializing...
[20:29:11.466] (II) DAEMON: Starting...
[20:29:11.467] (II) DAEMON: Logind interface found
[20:29:11.469] (II) DAEMON: Adding new display on vt 1 ...
[20:29:11.470] (II) DAEMON: Loading theme configuration from ""
[20:29:11.470] (II) DAEMON: Display server starting...
[20:29:11.470] (II) DAEMON: Adding cookie to "/var/run/sddm/{3ac12432-e77a-4616-87ea-d99ac87be71e}"
[20:29:11.477] (II) DAEMON: Running: /usr/bin/X -nolisten tcp -background none -seat seat0 vt1 -auth /var/run/sddm/{3ac12432-e77a-4616-87ea-d99ac87be71e} -noreset -displayfd 17
[20:29:14.039] (II) DAEMON: Setting default cursor
[20:29:14.125] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup"
[20:29:14.126] (II) DAEMON: Display server started.
[20:29:14.127] (II) DAEMON: Socket server starting...
[20:29:14.127] (II) DAEMON: Socket server started.
[20:29:14.129] (II) DAEMON: Loading theme configuration from "/usr/share/sddm/themes/breeze/theme.conf"
[20:29:14.130] (II) DAEMON: Greeter starting...
[20:29:14.145] (II) DAEMON: Greeter session started successfully
[20:29:14.205] (II) DAEMON: Message received from greeter: Connect
[20:29:22.835] (II) DAEMON: Message received from greeter: Login
[20:29:22.835] (II) DAEMON: Reading from "/usr/share/xsessions/i3-with-shmlog.desktop"
[20:29:22.837] (II) DAEMON: Reading from "/usr/share/xsessions/i3-with-shmlog.desktop"
[20:29:22.837] (II) DAEMON: Session "/usr/share/xsessions/i3-with-shmlog.desktop" selected, command: "i3-with-shmlog"
[20:29:22.869] (II) DAEMON: Authenticated successfully
[20:29:22.934] (II) DAEMON: Session started
[20:29:22.953] (II) DAEMON: Auth: sddm-helper exited successfully
[20:29:22.953] (II) DAEMON: Greeter stopped.
[21:29:33.509] (WW) DAEMON: Signal received: SIGTERM
[21:29:33.516] (II) DAEMON: Socket server stopping...
[21:29:33.516] (II) DAEMON: Socket server stopped.
[21:29:33.516] (II) DAEMON: Display server stopping...Xorg
[ 6.957] (--) Log file renamed from "/var/log/Xorg.pid-603.log" to "/var/log/Xorg.0.log"
[ 6.958]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 6.958] Current Operating System: Linux dragonfly 6.3.9-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 21 Jun 2023 20:46:20 +0000 x86_64
[ 6.958] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=316e2226-fbd2-4ed2-b2e4-3c447634d078 rw loglevel=3 quiet
[ 6.958]
[ 6.958] Current version of pixman: 0.42.2
[ 6.958] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.958] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.958] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 26 19:52:59 2023
[ 6.960] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.960] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.963] (==) ServerLayout "Layout0"
[ 6.963] (**) |-->Screen "Screen0" (0)
[ 6.963] (**) | |-->Monitor "Monitor0"
[ 6.963] (**) | |-->Device "Device0"
[ 6.963] (**) |-->Input Device "Keyboard0"
[ 6.963] (**) |-->Input Device "Mouse0"
[ 6.963] (==) Automatically adding devices
[ 6.964] (==) Automatically enabling devices
[ 6.964] (==) Automatically adding GPU devices
[ 6.964] (==) Automatically binding GPU devices
[ 6.964] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.967] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 6.967] Entry deleted from font path.
[ 6.967] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 6.967] Entry deleted from font path.
[ 6.967] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 6.967] Entry deleted from font path.
[ 6.967] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 6.967] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6.967] (WW) Disabling Keyboard0
[ 6.967] (WW) Disabling Mouse0
[ 6.967] (II) Module ABI versions:
[ 6.967] X.Org ANSI C Emulation: 0.4
[ 6.967] X.Org Video Driver: 25.2
[ 6.967] X.Org XInput driver : 24.4
[ 6.967] X.Org Server Extension : 10.0
[ 6.968] (++) using VT number 2
[ 6.968] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6.969] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.969] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 6.969] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.969] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 6.971] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 6.972] (--) PCI: (0@0:2:0) 8086:3e92:1028:0871 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64
[ 6.972] (--) PCI:*(1@0:0:0) 10de:1d01:1043:85f5 rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/131072
[ 6.972] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.972] (II) LoadModule: "glx"
[ 6.975] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.984] (II) Module glx: vendor="X.Org Foundation"
[ 6.984] compiled for 1.21.1.8, module version = 1.0.0
[ 6.984] ABI class: X.Org Server Extension, version 10.0
[ 6.984] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 6.984] loading driver: nvidia
[ 6.984] (==) Matched nvidia as autoconfigured driver 0
[ 6.984] (==) Matched nouveau as autoconfigured driver 1
[ 6.984] (==) Matched nv as autoconfigured driver 2
[ 6.984] (==) Matched intel as autoconfigured driver 3
[ 6.984] (==) Matched modesetting as autoconfigured driver 4
[ 6.984] (==) Matched fbdev as autoconfigured driver 5
[ 6.984] (==) Matched vesa as autoconfigured driver 6
[ 6.984] (==) Assigned the driver to the xf86ConfigLayout
[ 6.984] (II) LoadModule: "nvidia"
[ 6.984] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6.991] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.991] compiled for 1.6.99.901, module version = 1.0.0
[ 6.991] Module class: X.Org Video Driver
[ 6.992] (II) LoadModule: "nouveau"
[ 6.992] (WW) Warning, couldn't open module nouveau
[ 6.992] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 6.992] (II) LoadModule: "nv"
[ 6.992] (WW) Warning, couldn't open module nv
[ 6.992] (EE) Failed to load module "nv" (module does not exist, 0)
[ 6.992] (II) LoadModule: "intel"
[ 6.992] (WW) Warning, couldn't open module intel
[ 6.992] (EE) Failed to load module "intel" (module does not exist, 0)
[ 6.992] (II) LoadModule: "modesetting"
[ 6.992] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 6.998] (II) Module modesetting: vendor="X.Org Foundation"
[ 6.998] compiled for 1.21.1.8, module version = 1.21.1
[ 6.998] Module class: X.Org Video Driver
[ 6.998] ABI class: X.Org Video Driver, version 25.2
[ 6.998] (II) LoadModule: "fbdev"
[ 6.998] (WW) Warning, couldn't open module fbdev
[ 6.998] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 6.998] (II) LoadModule: "vesa"
[ 6.998] (WW) Warning, couldn't open module vesa
[ 6.998] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 6.998] (II) NVIDIA dlloader X Driver 535.54.03 Tue Jun 6 22:23:02 UTC 2023
[ 6.998] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.998] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 6.998] (II) Loading sub module "fb"
[ 6.998] (II) LoadModule: "fb"
[ 6.998] (II) Module "fb" already built-in
[ 6.998] (II) Loading sub module "wfb"
[ 6.998] (II) LoadModule: "wfb"
[ 6.998] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7.000] (II) Module wfb: vendor="X.Org Foundation"
[ 7.000] compiled for 1.21.1.8, module version = 1.0.0
[ 7.000] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.000] (WW) Falling back to old probe method for modesetting
[ 7.000] (II) modeset(G0): using drv /dev/dri/card0
[ 7.000] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 7.000] (==) NVIDIA(0): RGB weight 888
[ 7.000] (==) NVIDIA(0): Default visual is TrueColor
[ 7.000] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.000] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 7.000] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 7.001] (**) NVIDIA(0): Enabling 2D acceleration
[ 7.001] (II) Loading sub module "glxserver_nvidia"
[ 7.001] (II) LoadModule: "glxserver_nvidia"
[ 7.001] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 7.037] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 7.037] compiled for 1.6.99.901, module version = 1.0.0
[ 7.037] Module class: X.Org Server Extension
[ 7.037] (II) NVIDIA GLX Module 535.54.03 Tue Jun 6 22:23:41 UTC 2023
[ 7.038] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 7.638] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 7.638] (--) NVIDIA(0): DFP-0
[ 7.638] (--) NVIDIA(0): DFP-1 (boot)
[ 7.639] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 1030 (GP108-A) at PCI:1:0:0
[ 7.639] (II) NVIDIA(0): (GPU-0)
[ 7.639] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 7.639] (--) NVIDIA(0): VideoBIOS: 86.08.36.00.2c
[ 7.639] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 7.639] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7.639] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 7.639] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 7.639] (--) NVIDIA(GPU-0):
[ 7.683] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): connected
[ 7.683] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): Internal TMDS
[ 7.683] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): 600.0 MHz maximum pixel clock
[ 7.683] (--) NVIDIA(GPU-0):
[ 7.686] (==) NVIDIA(0):
[ 7.686] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 7.686] (==) NVIDIA(0): will be used as the requested mode.
[ 7.686] (==) NVIDIA(0):
[ 7.686] (II) NVIDIA(0): Validated MetaModes:
[ 7.686] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 7.686] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 7.691] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 7.691] (--) NVIDIA(0): option
[ 7.691] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[ 7.691] (==) modeset(G0): RGB weight 888
[ 7.691] (==) modeset(G0): Default visual is TrueColor
[ 7.691] (II) Loading sub module "glamoregl"
[ 7.691] (II) LoadModule: "glamoregl"
[ 7.691] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 7.698] (II) Module glamoregl: vendor="X.Org Foundation"
[ 7.698] compiled for 1.21.1.8, module version = 1.0.1
[ 7.698] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.983] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[ 7.983] (II) modeset(G0): glamor initialized
[ 7.984] (II) modeset(G0): Output DP-1-1 using monitor section Monitor0
[ 7.993] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 7.993] (II) modeset(G0): Output DP-1-2 has no monitor section
[ 8.002] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 8.002] (II) modeset(G0): Output DP-1-3 has no monitor section
[ 8.119] (II) modeset(G0): Output HDMI-1-3 has no monitor section
[ 8.119] (II) modeset(G0): EDID for output DP-1-1
[ 8.128] (II) modeset(G0): EDID for output HDMI-1-1
[ 8.128] (II) modeset(G0): EDID for output DP-1-2
[ 8.138] (II) modeset(G0): EDID for output HDMI-1-2
[ 8.138] (II) modeset(G0): EDID for output DP-1-3
[ 8.253] (II) modeset(G0): EDID for output HDMI-1-3
[ 8.253] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.253] (==) modeset(G0): DPI set to (96, 96)
[ 8.253] (II) Loading sub module "fb"
[ 8.253] (II) LoadModule: "fb"
[ 8.253] (II) Module "fb" already built-in
[ 8.254] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 8.254] (II) NVIDIA: access.
[ 8.255] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 8.255] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 8.255] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 8.255] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 8.255] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 8.255] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 8.255] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 8.255] (II) NVIDIA(0): Config Options in the README.
[ 8.268] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 8.318] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 8.318] (==) NVIDIA(0): Backing store enabled
[ 8.318] (==) NVIDIA(0): Silken mouse enabled
[ 8.318] (**) NVIDIA(0): DPMS enabled
[ 8.318] (II) Loading sub module "dri2"
[ 8.318] (II) LoadModule: "dri2"
[ 8.318] (II) Module "dri2" already built-in
[ 8.318] (II) NVIDIA(0): [DRI2] Setup complete
[ 8.318] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 8.337] (==) modeset(G0): Backing store enabled
[ 8.337] (==) modeset(G0): Silken mouse enabled
[ 8.338] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 8.338] (**) modeset(G0): DPMS enabled
[ 8.338] (II) modeset(G0): [DRI2] Setup complete
[ 8.338] (II) modeset(G0): [DRI2] DRI driver: iris
[ 8.338] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 8.338] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 8.338] (II) Initializing extension Generic Event Extension
[ 8.338] (II) Initializing extension SHAPE
[ 8.338] (II) Initializing extension MIT-SHM
[ 8.338] (II) Initializing extension XInputExtension
[ 8.338] (II) Initializing extension XTEST
[ 8.338] (II) Initializing extension BIG-REQUESTS
[ 8.339] (II) Initializing extension SYNC
[ 8.339] (II) Initializing extension XKEYBOARD
[ 8.339] (II) Initializing extension XC-MISC
[ 8.339] (II) Initializing extension SECURITY
[ 8.339] (II) Initializing extension XFIXES
[ 8.339] (II) Initializing extension RENDER
[ 8.339] (II) Initializing extension RANDR
[ 8.340] (II) Initializing extension COMPOSITE
[ 8.340] (II) Initializing extension DAMAGE
[ 8.340] (II) Initializing extension MIT-SCREEN-SAVER
[ 8.340] (II) Initializing extension DOUBLE-BUFFER
[ 8.340] (II) Initializing extension RECORD
[ 8.340] (II) Initializing extension DPMS
[ 8.340] (II) Initializing extension Present
[ 8.341] (II) Initializing extension DRI3
[ 8.341] (II) Initializing extension X-Resource
[ 8.341] (II) Initializing extension XVideo
[ 8.341] (II) Initializing extension XVideo-MotionCompensation
[ 8.341] (II) Initializing extension GLX
[ 8.341] (II) Initializing extension GLX
[ 8.341] (II) Indirect GLX disabled.
[ 8.342] (II) GLX: Another vendor is already registered for screen 0
[ 8.342] (II) Initializing extension XFree86-VidModeExtension
[ 8.342] (II) Initializing extension XFree86-DGA
[ 8.342] (II) Initializing extension XFree86-DRI
[ 8.342] (II) Initializing extension DRI2
[ 8.342] (II) Initializing extension NV-GLX
[ 8.342] (II) Initializing extension NV-CONTROL
[ 8.342] (II) Initializing extension XINERAMA
[ 8.343] (II) modeset(G0): Damage tracking initialized
[ 8.409] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 8.409] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.409] (II) LoadModule: "libinput"
[ 8.409] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.414] (II) Module libinput: vendor="X.Org Foundation"
[ 8.414] compiled for 1.21.1.8, module version = 1.3.0
[ 8.414] Module class: X.Org XInput Driver
[ 8.414] ABI class: X.Org XInput driver, version 24.4
[ 8.414] (II) Using input driver 'libinput' for 'Power Button'
[ 8.414] (**) Power Button: always reports core events
[ 8.414] (**) Option "Device" "/dev/input/event2"
[ 8.418] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.418] (II) event2 - Power Button: device is a keyboard
[ 8.418] (II) event2 - Power Button: device removed
[ 8.460] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 8.460] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.460] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.460] (II) event2 - Power Button: device is a keyboard
[ 8.461] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 8.461] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.461] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.461] (**) Video Bus: always reports core events
[ 8.461] (**) Option "Device" "/dev/input/event3"
[ 8.461] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 8.461] (II) event3 - Video Bus: device is a keyboard
[ 8.461] (II) event3 - Video Bus: device removed
[ 8.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 8.500] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.500] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 8.500] (II) event3 - Video Bus: device is a keyboard
[ 8.501] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 8.501] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.501] (II) Using input driver 'libinput' for 'Power Button'
[ 8.501] (**) Power Button: always reports core events
[ 8.501] (**) Option "Device" "/dev/input/event1"
[ 8.501] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.501] (II) event1 - Power Button: device is a keyboard
[ 8.501] (II) event1 - Power Button: device removed
[ 8.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 8.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 8.520] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.520] (II) event1 - Power Button: device is a keyboard
[ 8.521] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 8.521] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 8.521] (II) Using input driver 'libinput' for 'Sleep Button'
[ 8.521] (**) Sleep Button: always reports core events
[ 8.521] (**) Option "Device" "/dev/input/event0"
[ 8.521] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.521] (II) event0 - Sleep Button: device is a keyboard
[ 8.521] (II) event0 - Sleep Button: device removed
[ 8.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 8.540] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 8.540] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.540] (II) event0 - Sleep Button: device is a keyboard
[ 8.541] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 8.541] (II) No input driver specified, ignoring this device.
[ 8.541] (II) This device may have been added with another device file.
[ 8.541] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 8.541] (II) No input driver specified, ignoring this device.
[ 8.541] (II) This device may have been added with another device file.
[ 8.541] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 8.541] (II) No input driver specified, ignoring this device.
[ 8.541] (II) This device may have been added with another device file.
[ 8.541] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[ 8.541] (II) No input driver specified, ignoring this device.
[ 8.541] (II) This device may have been added with another device file.
[ 8.542] (II) config/udev: Adding input device Logitech M510 (/dev/input/event7)
[ 8.542] (**) Logitech M510: Applying InputClass "libinput pointer catchall"
[ 8.542] (II) Using input driver 'libinput' for 'Logitech M510'
[ 8.542] (**) Logitech M510: always reports core events
[ 8.542] (**) Option "Device" "/dev/input/event7"
[ 8.543] (II) event7 - Logitech M510: is tagged by udev as: Mouse
[ 8.543] (II) event7 - Logitech M510: device is a pointer
[ 8.543] (II) event7 - Logitech M510: device removed
[ 8.590] (II) libinput: Logitech M510: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.590] (II) libinput: Logitech M510: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.590] (II) libinput: Logitech M510: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:4051.0007/input/input18/event7"
[ 8.590] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 10)
[ 8.590] (**) Option "AccelerationScheme" "none"
[ 8.590] (**) Logitech M510: (accel) selected scheme none/0
[ 8.590] (**) Logitech M510: (accel) acceleration factor: 2.000
[ 8.590] (**) Logitech M510: (accel) acceleration threshold: 4
[ 8.591] (II) event7 - Logitech M510: is tagged by udev as: Mouse
[ 8.591] (II) event7 - Logitech M510: device is a pointer
[ 8.591] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse1)
[ 8.591] (II) No input driver specified, ignoring this device.
[ 8.591] (II) This device may have been added with another device file.
[ 8.592] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 (/dev/input/event4)
[ 8.592] (**) Hoksi Technology DURGOD Taurus K320: Applying InputClass "libinput keyboard catchall"
[ 8.592] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320'
[ 8.592] (**) Hoksi Technology DURGOD Taurus K320: always reports core events
[ 8.592] (**) Option "Device" "/dev/input/event4"
[ 8.593] (II) event4 - Hoksi Technology DURGOD Taurus K320: is tagged by udev as: Keyboard
[ 8.593] (II) event4 - Hoksi Technology DURGOD Taurus K320: device is a keyboard
[ 8.593] (II) event4 - Hoksi Technology DURGOD Taurus K320: device removed
[ 8.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:2F68:0082.0004/input/input9/event4"
[ 8.620] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320" (type: KEYBOARD, id 11)
[ 8.621] (II) event4 - Hoksi Technology DURGOD Taurus K320: is tagged by udev as: Keyboard
[ 8.621] (II) event4 - Hoksi Technology DURGOD Taurus K320: device is a keyboard
[ 8.621] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 System Control (/dev/input/event5)
[ 8.621] (**) Hoksi Technology DURGOD Taurus K320 System Control: Applying InputClass "libinput keyboard catchall"
[ 8.621] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 System Control'
[ 8.621] (**) Hoksi Technology DURGOD Taurus K320 System Control: always reports core events
[ 8.621] (**) Option "Device" "/dev/input/event5"
[ 8.622] (II) event5 - Hoksi Technology DURGOD Taurus K320 System Control: is tagged by udev as: Keyboard
[ 8.622] (II) event5 - Hoksi Technology DURGOD Taurus K320 System Control: device is a keyboard
[ 8.622] (II) event5 - Hoksi Technology DURGOD Taurus K320 System Control: device removed
[ 8.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input10/event5"
[ 8.640] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 System Control" (type: KEYBOARD, id 12)
[ 8.641] (II) event5 - Hoksi Technology DURGOD Taurus K320 System Control: is tagged by udev as: Keyboard
[ 8.641] (II) event5 - Hoksi Technology DURGOD Taurus K320 System Control: device is a keyboard
[ 8.641] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Consumer Control (/dev/input/event8)
[ 8.641] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.641] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Consumer Control'
[ 8.641] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: always reports core events
[ 8.641] (**) Option "Device" "/dev/input/event8"
[ 8.642] (II) event8 - Hoksi Technology DURGOD Taurus K320 Consumer Control: is tagged by udev as: Keyboard
[ 8.642] (II) event8 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device is a keyboard
[ 8.642] (II) event8 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device removed
[ 8.670] (II) libinput: Hoksi Technology DURGOD Taurus K320 Consumer Control: needs a virtual subdevice
[ 8.670] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input11/event8"
[ 8.670] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Consumer Control" (type: MOUSE, id 13)
[ 8.670] (**) Option "AccelerationScheme" "none"
[ 8.670] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: (accel) selected scheme none/0
[ 8.670] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: (accel) acceleration factor: 2.000
[ 8.670] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: (accel) acceleration threshold: 4
[ 8.671] (II) event8 - Hoksi Technology DURGOD Taurus K320 Consumer Control: is tagged by udev as: Keyboard
[ 8.671] (II) event8 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device is a keyboard
[ 8.671] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Keyboard (/dev/input/event6)
[ 8.671] (**) Hoksi Technology DURGOD Taurus K320 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.671] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Keyboard'
[ 8.671] (**) Hoksi Technology DURGOD Taurus K320 Keyboard: always reports core events
[ 8.671] (**) Option "Device" "/dev/input/event6"
[ 8.672] (II) event6 - Hoksi Technology DURGOD Taurus K320 Keyboard: is tagged by udev as: Keyboard
[ 8.672] (II) event6 - Hoksi Technology DURGOD Taurus K320 Keyboard: device is a keyboard
[ 8.672] (II) event6 - Hoksi Technology DURGOD Taurus K320 Keyboard: device removed
[ 8.690] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input12/event6"
[ 8.690] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Keyboard" (type: KEYBOARD, id 14)
[ 8.691] (II) event6 - Hoksi Technology DURGOD Taurus K320 Keyboard: is tagged by udev as: Keyboard
[ 8.691] (II) event6 - Hoksi Technology DURGOD Taurus K320 Keyboard: device is a keyboard
[ 8.691] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Mouse (/dev/input/event9)
[ 8.691] (**) Hoksi Technology DURGOD Taurus K320 Mouse: Applying InputClass "libinput pointer catchall"
[ 8.691] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Mouse'
[ 8.691] (**) Hoksi Technology DURGOD Taurus K320 Mouse: always reports core events
[ 8.691] (**) Option "Device" "/dev/input/event9"
[ 8.692] (II) event9 - Hoksi Technology DURGOD Taurus K320 Mouse: is tagged by udev as: Mouse
[ 8.692] (II) event9 - Hoksi Technology DURGOD Taurus K320 Mouse: device is a pointer
[ 8.692] (II) event9 - Hoksi Technology DURGOD Taurus K320 Mouse: device removed
[ 8.740] (II) libinput: Hoksi Technology DURGOD Taurus K320 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.740] (II) libinput: Hoksi Technology DURGOD Taurus K320 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.740] (II) libinput: Hoksi Technology DURGOD Taurus K320 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input13/event9"
[ 8.740] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Mouse" (type: MOUSE, id 15)
[ 8.740] (**) Option "AccelerationScheme" "none"
[ 8.740] (**) Hoksi Technology DURGOD Taurus K320 Mouse: (accel) selected scheme none/0
[ 8.740] (**) Hoksi Technology DURGOD Taurus K320 Mouse: (accel) acceleration factor: 2.000
[ 8.740] (**) Hoksi Technology DURGOD Taurus K320 Mouse: (accel) acceleration threshold: 4
[ 8.741] (II) event9 - Hoksi Technology DURGOD Taurus K320 Mouse: is tagged by udev as: Mouse
[ 8.741] (II) event9 - Hoksi Technology DURGOD Taurus K320 Mouse: device is a pointer
[ 8.741] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Mouse (/dev/input/mouse0)
[ 8.741] (II) No input driver specified, ignoring this device.
[ 8.741] (II) This device may have been added with another device file.
[ 8.742] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event17)
[ 8.742] (II) No input driver specified, ignoring this device.
[ 8.742] (II) This device may have been added with another device file.
[ 8.742] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event18)
[ 8.742] (II) No input driver specified, ignoring this device.
[ 8.742] (II) This device may have been added with another device file.
[ 8.742] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event19)
[ 8.742] (II) No input driver specified, ignoring this device.
[ 8.742] (II) This device may have been added with another device file.
[ 8.742] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event20)
[ 8.742] (II) No input driver specified, ignoring this device.
[ 8.742] (II) This device may have been added with another device file.
[ 8.742] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event21)
[ 8.742] (II) No input driver specified, ignoring this device.
[ 8.742] (II) This device may have been added with another device file.
[ 8.743] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[ 8.743] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 8.743] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 8.743] (**) Dell WMI hotkeys: always reports core events
[ 8.743] (**) Option "Device" "/dev/input/event12"
[ 8.743] (II) event12 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 8.743] (II) event12 - Dell WMI hotkeys: device is a keyboard
[ 8.744] (II) event12 - Dell WMI hotkeys: device removed
[ 8.800] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:04/wmi_bus/wmi_bus-PNP0C14:04/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input21/event12"
[ 8.800] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 8.800] (II) event12 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 8.800] (II) event12 - Dell WMI hotkeys: device is a keyboard
[ 8.801] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 8.801] (II) No input driver specified, ignoring this device.
[ 8.801] (II) This device may have been added with another device file.
[ 8.802] (II) config/udev: Adding input device Dell AIO WMI hotkeys (/dev/input/event11)
[ 8.802] (**) Dell AIO WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 8.802] (II) Using input driver 'libinput' for 'Dell AIO WMI hotkeys'
[ 8.802] (**) Dell AIO WMI hotkeys: always reports core events
[ 8.802] (**) Option "Device" "/dev/input/event11"
[ 8.803] (II) event11 - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[ 8.803] (II) event11 - Dell AIO WMI hotkeys: device is a keyboard
[ 8.803] (II) event11 - Dell AIO WMI hotkeys: device removed
[ 8.850] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event11"
[ 8.850] (II) XINPUT: Adding extended input device "Dell AIO WMI hotkeys" (type: KEYBOARD, id 17)
[ 8.850] (II) event11 - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[ 8.850] (II) event11 - Dell AIO WMI hotkeys: device is a keyboard
[ 8.853] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.853] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Consumer Control'
[ 8.853] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: always reports core events
[ 8.853] (**) Option "Device" "/dev/input/event8"
[ 8.853] (II) libinput: Hoksi Technology DURGOD Taurus K320 Consumer Control: is a virtual subdevice
[ 8.853] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input11/event8"
[ 8.853] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Consumer Control" (type: KEYBOARD, id 18)Offline
#4 2023-06-27 07:11:40
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
Don't use an nvidia-settings generated xorg configuration, since the only output seems to be connected to the nvidia chip, you're looking for https://wiki.archlinux.org/title/NVIDIA … phics_only (or disable the IGP in the BIOS) but I don't suspect that to be the cause of the immediate issue.
You're not starting i3, but i3-with-shmlog.desktop - I assume that's deliberate and consistent among tested UIDs?
The journal is useless, don't copy & paste out of the pager.
journalctl -b | curl -F 'f:1=<-' ix.io # after attempting to log into i3and since you're using the logging service, also post the i3 log.
Offline
#5 2023-06-27 22:17:07
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
Hi seth,
The journalctl was sent to ix.io.
Oddly enough, /var/log/i3.log does not exist?!
Let me know if there is anything else you think that may help. Many thanks.
Offline
#6 2023-06-27 22:22:04
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
You need to post the ix.io url you got…
https://i3wm.org/docs/userguide.html
"6.18. Enabling shared memory logging"
Offline
#7 2023-06-27 23:38:16
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
Offline
#8 2023-06-27 23:48:47
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@seth,
I just noticed that the link returns "no content"... no matter how many times I copy/paste the link you posted.
Offline
#9 2023-06-28 00:07:12
- LRitzdorf
- Member
- Registered: 2022-12-08
- Posts: 35
Re: Can login but no desktop [SOLVED]
I've got it, from the list of recent uploads: http://ix.io/4zhC. This doesn't look anywhere near as complete as what you tried to copy/paste earlier, though...
Offline
#10 2023-06-28 00:19:45
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@LRitzdorf
Yea. I see it now... but I do not see anything that provides a clue to the problem ...
Offline
#11 2023-06-28 05:12:46
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
The copypaste might just be a lot of artifacts from the pager. The posted one has
Jun 27 19:34:47 dragonfly su[75433]: (to ralvez) alvez on pts/0So you su'd into your ralvez user from the (successful) alvez - which is likely UID 1001 and the subject of that journal.
Please post your complete system journal for the boot after failing to start i3:
sudo journalctl -b | curl -F 'f:1=<-' ix.ioDid you see the i3 debugging section?
Offline
#12 2023-06-28 18:09:47
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@seth,
Hi. The reason I go to ralvez via su on alvez is that as soon as I try to log in using ralvez I get locked out of my system.
It no longer responds to any other commands nor I can open a TTY to log in as ralvez.
If you have any suggestions on another way to access the system I'll be happy to try. I myself run out of tricks. 
Offline
#13 2023-06-28 18:19:36
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
Can you reboot the system w/ the https://wiki.archlinux.org/title/Keyboa … el_(SysRq) ?
If so, you can post the system journal of the previous boot (where you locked yourself out) w/ "… -b -1 …" instead of "-b"
An alternative approach would be to ssh into the system, lock yourself out (whatever that implies) and see whether the ssh login still responds (allowing you to live-analyze the situation)
Also post some config files for your troublesome user, notably any shell rc and xinitrc and i3 config, along this list
ls ~ralvez/.{bash,zsh,x,}{rc,_profile,_env,profile} ~ralvez/.xinitrc ~ralvez/.config/i3/config 2>/dev/nullOffline
#14 2023-06-28 18:30:39
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@seth,
OK. That's a great idea/s.
I'll try to do as you suggest, then I'll post again.
Thanks!!
Offline
#15 2023-06-28 22:26:54
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@seth,
After reading about SysRg I decided to give it a go, but I found a show stopper already 
My /etc/sysctl.d does not have any files. Meaning I cannot edit 50-default.conf because it is not there.
Is that expected? Or do I have to create the file?
Honestly, I expected it to be there because the instructions read: "systemd has the SysRq permissions bitmask set to 0x10 by default, which does not allow process signalling or rebooting, among other things." which implies the file should exist.
Any ideas?
bashrc
-------
If not running interactively, don't do anything
[[ $- != *i* ]] && return
alias ls='ls --color=auto'
alias grep='grep --color=auto'
PS1='[\u@\h \W]\$ '
[alvez@dragonfly ~]$ cat zsh
cat: zsh: No such file or directory
[alvez@dragonfly ~]$ cat zshrc
cat: zshrc: No such file or directory
[alvez@dragonfly ~]$ su
Password:
[root@dragonfly alvez]# cat /home/ralvez/.bashrc
# ~/.bashrc
# --------------------
# Bash Prompt
#--------------------
BPType="vim" # can be: vim/git/none
if [ $BPType = 'git' ]; then
source ~/bin/prompts/bash-git-prompt/gitprompt.sh
GIT_PROMPT_ONLY_IN_REPO=1
elif [ $BPType = 'vim' ]; then
source /home/ralvez/bin/prompts/promptline-vim
else
# If not running interactively, don't do anything
[[ $- != *i* ]] && return
fi
# ----------[ Time Zone ]
TZ="America/Toronto"
export TZ
# ----------[ PATH ENV. ]
export PATH=$HOME/bin:$HOME/.local/bin:/usr/local/bin:/usr/bin
#----------------------------
# Exports
#----------------------------
if [ -f ~/bin/exports ]; then
source ~/bin/exports
fi
#----------------------------
# Aliases
#----------------------------
if [ -f ~/bin/aliases ]; then
source ~/bin/aliases
fi
# ------------------------
# Configurations
# -----------------------
if [ -f ~/bin/su-shortcut.sh ]; then
source ~/bin/su-shortcut.sh
fi
#----------[ Git Complition ]
if [ -f ~/bin/git-completion ]; then
source ~/bin/git-completion
fi
# Ignore small spelling error on cd command
shopt -q -s cdspell
# add cd when typing a path
shopt -s autocd
[ -f ~/.fzf.bash ] && source ~/.fzf.bash
# set keybinding for vim mode
# set -o vi
export VOLTA_HOME="$HOME/.volta"
export PATH="$VOLTA_HOME/bin:$PATH"i3/config
# Thes file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#
# ################################
# Keboard Control Keys
# ################################
set $Ctrl ctrl
set $Alt Mod1
set $Arch Mod4
set $Del Delete
set $mod Mod4
# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
# ################################
# GAPS
# ################################
gaps outer 4
gaps inner 8
gaps horizontal -1
gaps vertical -1
smart_gaps on
# ##########################
# WINDOWS WITH BORDERS
# ##########################
for_window [class="Alacritty"] border pixel 4
for_window [class="nvim-qt"] border pixel 4
# ##########################
# NO BORDER WINDOWS
# ##########################
# Remove window titles and keep borders
new_window 1pixel
# Remove window titles and borders
# for_window [class=".*"] border pixel 0
#for_window [class="(?i)Albert"] border pixel 0
# ##########################
# Floating WINDOWS
# ##########################
# Options: floating enable, floating disable, fullscreen
for_window [class="(?i)zoom" instance="zoom" title="Zoom"] floating enable
for_window [class="(?i)signal" instance="signal"] floating disable
for_window [class="(?i)brave"] focus, floating disable
for_window [class="(?i)code-oss"] focus, floating disable
# You can also use any non-zero value if you'd like to have a border
#for_window [class="*"] border pixel 4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:Iosevka 11
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8
# The combination of xss-lock, nm-applet and pulseaudio-ctl is a popular choice, so
# they are included here as an example. Modify as you see fit.
# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
exec --no-startup-id nm-applet
# ################################
# MULTIMEDIA KEYS
# ################################
# Use pulseaudio-ctl to adjust volume in PulseAudio.
# Requires pacman -S pulseaudio-ctl & pacmd
# 2020 - Use pipewire with pipewire-pulse
# BLUETOOTH: Edit /etc/pulse/default.pa and add: load-module module-switch-on-connect
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id /usr/bin/pamixer set-sink-volume -i 1 && $refresh_i3status
bindsym XF86AudioLowerVolume exec --no-startup-id /usr/bin/pamixer set-sink-volume -d 1 && $refresh_i3status
bindsym XF86AudioMute exec --no-startup-id /usr/bin/pamixer -t set-sink-mute && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id /usr/bin/pamixer -u set-source-mute && $refresh_i3status
# GUI support with pasystray
# Media player controls
# Requires pacman -S playerctl
bindsym XF86AudioPlay exec playerctl play
bindsym XF86AudioPause exec playerctl pause
bindsym XF86AudioNext exec playerctl next
bindsym XF86AudioPrev exec playerctl previous
# Screen brightness controls
#bindsym XF85MonBrightnessUp exec xbacklight -inc 20 # increase screen brightness
#bindsym XF85MonBrightnessDown exec xbacklight -dec 20 # decrease screen brightness
# Touchpad controls
#bindsym XF85TouchpadToggle exec /some/path/toggletouchpad.sh # toggle touchpad
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# Start Alacritty Terminal
bindsym $mod+Return exec --no-startup-id alacritty
# kill focused window
bindsym $mod+Shift+q kill
# start dmenu (a program launcher)
# A more modern dmenu replacement is rofi:
#bindcode $mod+40 exec "rofi -show run"
#bindsym $mod+r exec --no-startup-id "rofi -show run"
# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+h focus left
bindsym $mod+j focus down
bindsym $mod+k focus up
bindsym $mod+l focus right
#bindsym $mod+semicolon focus left
bindsym $mod+semicolon exec --no-startup-id flash_window
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+j move down
bindsym $mod+Shift+k move up
bindsym $mod+Shift+l move right
#bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in vertical orientation
bindsym $mod+v split v
# split in horizontal orientation
bindsym $mod+o split h
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+$Alt+s layout stacking
bindsym $mod+$Alt+w layout tabbed
bindsym $mod+$Alt+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+$Alt+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1 "
set $ws2 "2 "
set $ws3 "3 "
set $ws4 "4 "
set $ws5 "5 "
set $ws6 "6 "
set $ws7 "7 "
set $ws8 "8 "
set $ws9 "9 "
set $ws10 "10 "
# switch to workspace
bindsym $mod+1 workspace number $ws1
bindsym $mod+2 workspace number $ws2
bindsym $mod+3 workspace number $ws3
bindsym $mod+4 workspace number $ws4
bindsym $mod+5 workspace number $ws5
bindsym $mod+6 workspace number $ws6
bindsym $mod+7 workspace number $ws7
bindsym $mod+8 workspace number $ws8
bindsym $mod+9 workspace number $ws9
bindsym $mod+0 workspace number $ws10
# To switch wallpaper when workspace changes use this:
# bindsym $mod+0 workspace number $ws10 exec --no-startup-id "feh --bg-fill --recursive --randomize ~/.wallpapers/*"
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number $ws1
bindsym $mod+Shift+2 move container to workspace number $ws2
bindsym $mod+Shift+3 move container to workspace number $ws3
bindsym $mod+Shift+4 move container to workspace number $ws4
bindsym $mod+Shift+5 move container to workspace number $ws5
bindsym $mod+Shift+6 move container to workspace number $ws6
bindsym $mod+Shift+7 move container to workspace number $ws7
bindsym $mod+Shift+8 move container to workspace number $ws8
bindsym $mod+Shift+9 move container to workspace number $ws9
bindsym $mod+Shift+0 move container to workspace number $ws10
# ##########################
# App. Workspaces
# ##########################
assign [class="nvim"] $ws1
assign [class="code-oss"] $ws1
assign [class="Thunar"] $ws2
for_window [class="Thunar"]focus
assign [class="firefox"] $ws3
assign [class="(?i)brave"] $ws3
assign [class="(?i)thunderbird"] $ws4
assign [class="(?i)teams"] $ws9
assign [class="zoom"] $ws9
assign [class="Signal"] $ws9
assign [class="Postman"] $ws9
assign [class="(?i)insomnia"] $ws10
assign [class="(?i)Shotcut"] $ws10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
# bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
bindsym $mod+Shift+e exec i3-msg exit
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym h resize shrink width 10 px or 10 ppt
bindsym j resize grow height 10 px or 10 ppt
bindsym k resize shrink height 10 px or 10 ppt
bindsym l resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape or $mod+z
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+z mode "default"
}
bindsym $mod+z mode "resize"
# ################################
# CUSTOMIZE COLOURS
# ################################
set $bg-color #2F343F99
set $bg-solid-color #2F343F
set $inactive-bg-color #2F343F
set $text-color #F3F4F5
set $inactive-text-color #676E7D
set $urget-bg-color #E53935
set $focused-color #33669980
## WINDOW COLOURS
# Border Backgournd Text Indicator
# -------------------------------------------------------------------------------------------------------
client.focused $bg-solid-color $bg-solid-color $text-color $bg-color
client.unfocused $inactive-bg-color $inactive-bg-color $inactive-text-color $bg-color
client.focused_inactive $inactive-bg-color $inactive-bg-color $inactive-text-color $bg-color
client.urgent $urget-bg-color $urget-bg-color $text-color $bg-color
hide_edge_borders both
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
i3bar_command i3bar --transparency
output primary
status_command i3blocks -c ~/.config/i3/i3blocks.conf
position top
#mode hide
workspace_buttons yes
tray_output primary
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
font pango:monofur, fontawesome 12
colors {
background $bg-color
statusline $text-color
separator #757575
# Border Backrgound Text
# ------------------------------------------------------------------------------
focused_workspace $bg-solid-color $bg-color $text-color
active_workspace $bg-color $bg-color $text-color
inactive_workspace $inactive-bg-color $inactive-bg-color $inactive-text-color
urgent_workspace $urget-bg-color $urget-bg-color $text-color
}
}
# ################################
# MOST USED APPS
# ################################
## Scripts dir.
set $SCRIPTS $HOME/.config/i3/scripts
set $ranger alacritty -e ranger
set $firefox firefox
set $brave brave
set $thunderbird firejail thunderbird
set $megasync megasync
set $thunar thunar
set $radiotray radiotray-ng
set $nvim nvim
set $teams teams
#set $albert albert
set $calcurse calcurse
set $scim sc-im
set $zoom zoom
# ########################
# APPS. SHORTCUTS
# ########################
bindsym Mod1+b exec $firefox
bindsym Mod1+m exec $thunderbird
bindsym $mod+e exec --no-startup-id $thunar
bindsym ctrl+Shift+r exec --no-startup-id $ranger
bindsym ctrl+Shift+t exec --no-startup-id $radiotray
bindsym ctrl+Shift+n exec --no-startup-id alacritty -e $nvim-qt
bindsym ctrl+Shift+m exec --no-startup-id $teams
bindsym ctrl+Shift+c exec --no-startup-id alacritty -e $calcurse
bindsym $mod+space exec --no-startup-id rofi -show drun
# ################################
# AUTOSTART
# ################################
# If NOT running my wallper auto-rotate with i3blocks uncomment the line below
#exec_always --no-startup-id "feh --bg-fill --recursive --randomize ~/.wallpapers/* &"
exec --no-startup-id "picom -f &"
exec --no-startup-id "radiotray-ng &"
exec --no-startup-id conky &
exec --no-startup-id $firefox &
exec --no-startup-id $thunderbird &
exec --no-startup-id /usr/lib/kdeconnectd &
exec --no-startup-id kdeconnect-indicator &
#exec --no-startup-id brave &
# exec --no-startup-id $megasync &
# ###################
# EXEC ALWAYS
# ###################
# Bluetooth
exec_always --no-startup-id "bluetoothctl power on >/dev/null"
# FlashFocus
exec_always --no-startup-id flashfocus
# XRANDR >> [ Requirement: pacman -S xorg-xrandr ]
exec_always --no-startup-id "xrandr --output HDMI-0 --mode 1920x1080 --primary"
# exec_always --no-startup-id "xrandr --output DVI-D-0 --mode 1920x1080 --primary"
# Bluetooth Manager
# exec_always --no-startup-id "blueman-applet"
# ################################
# LOCK COMPUTER
# ################################
bindsym $Ctrl+$Alt+l exec $SCRIPTS/lock --color=000000
# Power down
bindsym $Ctrl+$Alt+$Del exec $SCRIPTS/powermenu
# ################################
# DUNST MESSAGING
# ################################
# Requirement:
# pacman -Sy dunst
# Create dir .config/dusnt and copy config from /etc/dusnt/dunstrc
# Edit /usr/share/dbus-1/services/org.kde.plasma.Notifications.service
# and change the "Exec" line to: Exec=/usb/bin/dusnt
#
exec --no-startup-id dunst &
# #############################
# SCREEN CAPTURE
# #############################
# Requirement: pacman -S maim
# Uncomment below to enable feature
# Save screenshot to ~/Downloads
#bindsym Print exec --no-startup-id "maim -u -s -n -l -c 0.157,0.333,0.466,0.4 ~/Downloads/screenshots/newshot-$(date -Iseconds | cut -d'+' -f1).png"
# Save screenshot to clipboard
bindsym Print exec --no-startup-id "maim -s | xclip -selection clipboard -t image/png"zshrc
# User configuration
# export MANPATH="/usr/local/man:$MANPATH"
# Preferred editor for local and remote sessions
if [[ -n $SSH_CONNECTION ]]; then
export EDITOR='/usr/bin/nvim'
else
export EDITOR='/usr/bin/nvim'
fi
# Compilation flags
# export ARCHFLAGS="-arch x86_64"
# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
# --------------------
# Node Version Manager
# --------------------
export VOLTA_HOME="$HOME/.volta"
export PATH="$VOLTA_HOME/bin:$PATH"
alias ls='ls -Hl --group-directories-first --color=auto'Last edited by ralvez (2023-06-28 22:36:09)
Offline
#16 2023-06-29 06:09:52
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
I have to create the file
The systemd config is in /usr/lib/sysctl.d/50-default.conf and will get shadowed by /etc/sysctl.d/50-default.conf when you add that.
I assume
If not running interactively, don't do anything
[[ $- != *i* ]] && return
alias ls='ls --color=auto'
alias grep='grep --color=auto'
PS1='[\u@\h \W]\$ '
[alvez@dragonfly ~]$ cat zsh
cat: zsh: No such file or directory
[alvez@dragonfly ~]$ cat zshrc
cat: zshrc: No such file or directory
[alvez@dragonfly ~]$ su
Password:
[root@dragonfly alvez]# cat /home/ralvez/.bashrcis just copypasta from your terminal and not part of the actual file?
You're sourcing a bunch of local scripts in your .bashrc and .zshrc, try to comment that.
You're also auto-executing quite some processes from the i3 config, "exec_always --no-startup-id "xrandr --output HDMI-0 --mode 1920x1080 --primary"" being the most worrysome (because of some recent threads)
I'd briefly test whether you can start an openbox session w/ your regular user, if that's the case, the problems are likely w/ the i3 config, so move that away and see whether you can now log into an i3 session w/ your regular user (to confirm it's only the i3config)
Then restore the i3config and comment every exec line (you could eg. use "#??" to indicate it's commented for this test) and see whether you can still log in.
If that's the case, only comment the xrandr one (since I worry about it the most).
Offline
#17 2023-06-29 22:27:02
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@seth,
Well ... this was interesting.
I commented out "exec_always --no-startup-id "xrandr --output HDMI-0 --mode 1920x1080" then I logged out and in again as the user "alvez" and boom! Same problem as the default user "ralvez".
So I un-commented the line but no joy. Something broke in such a way that now neither alvez not ralvez can log in 
I'm getting to the point I'm beginning to feel that the best solution is to blow this machine out of the water and start clean.
I've put so much time trying to get this thing back to work.
Even with your help and ideas I'm getting to feel that this is a rescue mission from hell. LOL.
Offline
#18 2023-06-30 06:30:10
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
Are the config files in #15 from the user alvez, ralvez or both?
Did editing the config file of the user "ralvez" break the login for the user "alvez"??
I'm getting to feel that this is a rescue mission from hell
We'll need a journal covering the incident?
Offline
#19 2023-06-30 08:16:51
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
@seth,
Well ... I decided to go with my "gut feeling" and did the following:
1. move the directory ralvez (default user) to old_ralvez
2. created a new ralvez directory
3. copied the files and configs from old_ralvez to ralvez
4. rebooted the machine
5. logged as ralvez
6. system is working fine.
One thing I did notice was that the commented line "exec_always --no-startup-id "xrandr --output HDMI-0 --mode 1920x1080" seems to be necessary. Without it the i3 bar does not show. As soon as I un-comment it works fine.
I would like to thank you for all your help but is seems that for the moment things are working again.
I'm really curious as to what caused the problem but I care more that the system is once again up and running.
Once again thanks for all the help.
Offline
#20 2023-06-30 13:39:00
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
the commented line "exec_always --no-startup-id "xrandr --output HDMI-0 --mode 1920x1080" seems to be necessary
Please post your xorg log and the output of "xrandr -q"
The solution™ sounds like the error was bound to the UID or the $HOME directory (permissions)
Offline
#21 2023-06-30 14:04:15
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
xrandr
Authorization required, but no authorization protocol specified
Can't open display :0Xorg
[ 5.263] (--) Log file renamed from "/var/log/Xorg.pid-643.log" to "/var/log/Xorg.0.log"
[ 5.263]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 5.263] Current Operating System: Linux dragonfly 6.3.9-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 21 Jun 2023 20:46:20 +0000 x86_64
[ 5.263] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=316e2226-fbd2-4ed2-b2e4-3c447634d078 rw loglevel=3 quiet
[ 5.264]
[ 5.264] Current version of pixman: 0.42.2
[ 5.264] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.264] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.264] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 30 04:08:14 2023
[ 5.265] (==) Using config file: "/etc/X11/xorg.conf"
[ 5.265] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.265] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.266] (==) ServerLayout "Layout0"
[ 5.266] (**) |-->Screen "Screen0" (0)
[ 5.266] (**) | |-->Monitor "Monitor0"
[ 5.266] (**) | |-->Device "Device0"
[ 5.266] (**) |-->Input Device "Keyboard0"
[ 5.266] (**) |-->Input Device "Mouse0"
[ 5.266] (==) Automatically adding devices
[ 5.266] (==) Automatically enabling devices
[ 5.266] (==) Automatically adding GPU devices
[ 5.266] (==) Automatically binding GPU devices
[ 5.267] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.269] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.269] Entry deleted from font path.
[ 5.269] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 5.269] Entry deleted from font path.
[ 5.269] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 5.269] Entry deleted from font path.
[ 5.269] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 5.269] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.269] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 5.269] (WW) Disabling Keyboard0
[ 5.269] (WW) Disabling Mouse0
[ 5.269] (II) Module ABI versions:
[ 5.269] X.Org ANSI C Emulation: 0.4
[ 5.269] X.Org Video Driver: 25.2
[ 5.269] X.Org XInput driver : 24.4
[ 5.269] X.Org Server Extension : 10.0
[ 5.269] (++) using VT number 2
[ 5.269] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.270] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.270] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 5.270] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.270] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 5.271] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 5.271] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 5.271] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 5.272] (--) PCI: (0@0:2:0) 8086:3e92:1028:0871 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64
[ 5.272] (--) PCI:*(1@0:0:0) 10de:1d01:1043:85f5 rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/131072
[ 5.272] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.272] (II) LoadModule: "glx"
[ 5.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.279] (II) Module glx: vendor="X.Org Foundation"
[ 5.279] compiled for 1.21.1.8, module version = 1.0.0
[ 5.279] ABI class: X.Org Server Extension, version 10.0
[ 5.279] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 5.279] loading driver: nvidia
[ 5.279] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 5.279] loading driver: nvidia
[ 5.279] (II) Applying OutputClass "intel" to /dev/dri/card0
[ 5.279] loading driver: modesetting
[ 5.279] (==) Matched nvidia as autoconfigured driver 0
[ 5.279] (==) Matched nouveau as autoconfigured driver 1
[ 5.279] (==) Matched nv as autoconfigured driver 2
[ 5.279] (==) Matched modesetting as autoconfigured driver 3
[ 5.279] (==) Matched intel as autoconfigured driver 4
[ 5.279] (==) Matched fbdev as autoconfigured driver 5
[ 5.279] (==) Matched vesa as autoconfigured driver 6
[ 5.279] (==) Assigned the driver to the xf86ConfigLayout
[ 5.279] (II) LoadModule: "nvidia"
[ 5.279] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.283] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.283] compiled for 1.6.99.901, module version = 1.0.0
[ 5.283] Module class: X.Org Video Driver
[ 5.283] (II) LoadModule: "nouveau"
[ 5.283] (WW) Warning, couldn't open module nouveau
[ 5.283] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.283] (II) LoadModule: "nv"
[ 5.283] (WW) Warning, couldn't open module nv
[ 5.283] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5.283] (II) LoadModule: "modesetting"
[ 5.284] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.286] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.286] compiled for 1.21.1.8, module version = 1.21.1
[ 5.286] Module class: X.Org Video Driver
[ 5.286] ABI class: X.Org Video Driver, version 25.2
[ 5.286] (II) LoadModule: "intel"
[ 5.286] (WW) Warning, couldn't open module intel
[ 5.286] (EE) Failed to load module "intel" (module does not exist, 0)
[ 5.286] (II) LoadModule: "fbdev"
[ 5.286] (WW) Warning, couldn't open module fbdev
[ 5.286] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.286] (II) LoadModule: "vesa"
[ 5.286] (WW) Warning, couldn't open module vesa
[ 5.286] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.286] (II) NVIDIA dlloader X Driver 535.54.03 Tue Jun 6 22:23:02 UTC 2023
[ 5.286] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.286] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.287] (II) Loading sub module "fb"
[ 5.287] (II) LoadModule: "fb"
[ 5.287] (II) Module "fb" already built-in
[ 5.287] (II) Loading sub module "wfb"
[ 5.287] (II) LoadModule: "wfb"
[ 5.287] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.287] (II) Module wfb: vendor="X.Org Foundation"
[ 5.287] compiled for 1.21.1.8, module version = 1.0.0
[ 5.287] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.288] (WW) Falling back to old probe method for modesetting
[ 5.288] (II) modeset(G0): using drv /dev/dri/card0
[ 5.288] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 5.288] (==) NVIDIA(0): RGB weight 888
[ 5.288] (==) NVIDIA(0): Default visual is TrueColor
[ 5.288] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.288] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 5.288] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 5.288] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 5.288] (**) NVIDIA(0): Enabling 2D acceleration
[ 5.288] (II) Loading sub module "glxserver_nvidia"
[ 5.288] (II) LoadModule: "glxserver_nvidia"
[ 5.288] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 5.316] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 5.316] compiled for 1.6.99.901, module version = 1.0.0
[ 5.316] Module class: X.Org Server Extension
[ 5.316] (II) NVIDIA GLX Module 535.54.03 Tue Jun 6 22:23:41 UTC 2023
[ 5.316] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 5.924] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 5.924] (--) NVIDIA(0): DFP-0
[ 5.924] (--) NVIDIA(0): DFP-1 (boot)
[ 5.925] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 1030 (GP108-A) at PCI:1:0:0
[ 5.925] (II) NVIDIA(0): (GPU-0)
[ 5.925] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 5.925] (--) NVIDIA(0): VideoBIOS: 86.08.36.00.2c
[ 5.925] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 5.925] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 5.925] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 5.925] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 5.925] (--) NVIDIA(GPU-0):
[ 5.969] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): connected
[ 5.969] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): Internal TMDS
[ 5.969] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): 600.0 MHz maximum pixel clock
[ 5.969] (--) NVIDIA(GPU-0):
[ 5.972] (==) NVIDIA(0):
[ 5.972] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 5.972] (==) NVIDIA(0): will be used as the requested mode.
[ 5.972] (==) NVIDIA(0):
[ 5.972] (II) NVIDIA(0): Validated MetaModes:
[ 5.972] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 5.972] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 5.977] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 5.977] (--) NVIDIA(0): option
[ 5.977] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[ 5.977] (==) modeset(G0): RGB weight 888
[ 5.977] (==) modeset(G0): Default visual is TrueColor
[ 5.977] (II) Loading sub module "glamoregl"
[ 5.977] (II) LoadModule: "glamoregl"
[ 5.977] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.981] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.981] compiled for 1.21.1.8, module version = 1.0.1
[ 5.981] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.139] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[ 6.139] (II) modeset(G0): glamor initialized
[ 6.139] (II) modeset(G0): Output DP-1-1 using monitor section Monitor0
[ 6.148] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 6.148] (II) modeset(G0): Output DP-1-2 has no monitor section
[ 6.158] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 6.158] (II) modeset(G0): Output DP-1-3 has no monitor section
[ 6.279] (II) modeset(G0): Output HDMI-1-3 has no monitor section
[ 6.279] (II) modeset(G0): EDID for output DP-1-1
[ 6.288] (II) modeset(G0): EDID for output HDMI-1-1
[ 6.288] (II) modeset(G0): EDID for output DP-1-2
[ 6.298] (II) modeset(G0): EDID for output HDMI-1-2
[ 6.298] (II) modeset(G0): EDID for output DP-1-3
[ 6.422] (II) modeset(G0): EDID for output HDMI-1-3
[ 6.422] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.422] (==) modeset(G0): DPI set to (96, 96)
[ 6.422] (II) Loading sub module "fb"
[ 6.422] (II) LoadModule: "fb"
[ 6.422] (II) Module "fb" already built-in
[ 6.422] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 6.422] (II) NVIDIA: access.
[ 6.424] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 6.424] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6.424] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 6.424] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 6.424] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 6.424] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6.424] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 6.424] (II) NVIDIA(0): Config Options in the README.
[ 6.437] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 6.485] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6.485] (==) NVIDIA(0): Backing store enabled
[ 6.485] (==) NVIDIA(0): Silken mouse enabled
[ 6.485] (**) NVIDIA(0): DPMS enabled
[ 6.485] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 6.485] (II) Loading sub module "dri2"
[ 6.485] (II) LoadModule: "dri2"
[ 6.485] (II) Module "dri2" already built-in
[ 6.485] (II) NVIDIA(0): [DRI2] Setup complete
[ 6.485] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 6.498] (==) modeset(G0): Backing store enabled
[ 6.498] (==) modeset(G0): Silken mouse enabled
[ 6.499] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 6.499] (**) modeset(G0): DPMS enabled
[ 6.499] (II) modeset(G0): [DRI2] Setup complete
[ 6.499] (II) modeset(G0): [DRI2] DRI driver: iris
[ 6.499] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 6.499] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 6.499] (II) Initializing extension Generic Event Extension
[ 6.499] (II) Initializing extension SHAPE
[ 6.499] (II) Initializing extension MIT-SHM
[ 6.499] (II) Initializing extension XInputExtension
[ 6.499] (II) Initializing extension XTEST
[ 6.499] (II) Initializing extension BIG-REQUESTS
[ 6.499] (II) Initializing extension SYNC
[ 6.499] (II) Initializing extension XKEYBOARD
[ 6.500] (II) Initializing extension XC-MISC
[ 6.500] (II) Initializing extension SECURITY
[ 6.500] (II) Initializing extension XFIXES
[ 6.500] (II) Initializing extension RENDER
[ 6.500] (II) Initializing extension RANDR
[ 6.500] (II) Initializing extension COMPOSITE
[ 6.500] (II) Initializing extension DAMAGE
[ 6.500] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.500] (II) Initializing extension DOUBLE-BUFFER
[ 6.500] (II) Initializing extension RECORD
[ 6.500] (II) Initializing extension DPMS
[ 6.500] (II) Initializing extension Present
[ 6.500] (II) Initializing extension DRI3
[ 6.500] (II) Initializing extension X-Resource
[ 6.500] (II) Initializing extension XVideo
[ 6.500] (II) Initializing extension XVideo-MotionCompensation
[ 6.500] (II) Initializing extension GLX
[ 6.501] (II) Initializing extension GLX
[ 6.501] (II) Indirect GLX disabled.
[ 6.501] (II) GLX: Another vendor is already registered for screen 0
[ 6.501] (II) Initializing extension XFree86-VidModeExtension
[ 6.501] (II) Initializing extension XFree86-DGA
[ 6.501] (II) Initializing extension XFree86-DRI
[ 6.501] (II) Initializing extension DRI2
[ 6.501] (II) Initializing extension NV-GLX
[ 6.501] (II) Initializing extension NV-CONTROL
[ 6.501] (II) Initializing extension XINERAMA
[ 6.501] (II) modeset(G0): Damage tracking initialized
[ 6.551] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.551] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.551] (II) LoadModule: "libinput"
[ 6.551] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.554] (II) Module libinput: vendor="X.Org Foundation"
[ 6.554] compiled for 1.21.1.8, module version = 1.3.0
[ 6.554] Module class: X.Org XInput Driver
[ 6.554] ABI class: X.Org XInput driver, version 24.4
[ 6.554] (II) Using input driver 'libinput' for 'Power Button'
[ 6.554] (**) Power Button: always reports core events
[ 6.554] (**) Option "Device" "/dev/input/event2"
[ 6.558] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 6.558] (II) event2 - Power Button: device is a keyboard
[ 6.558] (II) event2 - Power Button: device removed
[ 6.576] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 6.577] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.577] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 6.577] (II) event2 - Power Button: device is a keyboard
[ 6.577] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 6.577] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.577] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.577] (**) Video Bus: always reports core events
[ 6.577] (**) Option "Device" "/dev/input/event3"
[ 6.578] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 6.578] (II) event3 - Video Bus: device is a keyboard
[ 6.578] (II) event3 - Video Bus: device removed
[ 6.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 6.616] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.617] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 6.617] (II) event3 - Video Bus: device is a keyboard
[ 6.617] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.617] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.617] (II) Using input driver 'libinput' for 'Power Button'
[ 6.617] (**) Power Button: always reports core events
[ 6.617] (**) Option "Device" "/dev/input/event1"
[ 6.618] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 6.618] (II) event1 - Power Button: device is a keyboard
[ 6.618] (II) event1 - Power Button: device removed
[ 6.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 6.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.637] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 6.637] (II) event1 - Power Button: device is a keyboard
[ 6.637] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 6.637] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 6.637] (II) Using input driver 'libinput' for 'Sleep Button'
[ 6.637] (**) Sleep Button: always reports core events
[ 6.637] (**) Option "Device" "/dev/input/event0"
[ 6.638] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 6.638] (II) event0 - Sleep Button: device is a keyboard
[ 6.638] (II) event0 - Sleep Button: device removed
[ 6.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 6.663] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.664] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 6.664] (II) event0 - Sleep Button: device is a keyboard
[ 6.664] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 6.664] (II) No input driver specified, ignoring this device.
[ 6.664] (II) This device may have been added with another device file.
[ 6.664] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 6.664] (II) No input driver specified, ignoring this device.
[ 6.664] (II) This device may have been added with another device file.
[ 6.664] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 6.664] (II) No input driver specified, ignoring this device.
[ 6.664] (II) This device may have been added with another device file.
[ 6.665] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 6.665] (II) No input driver specified, ignoring this device.
[ 6.665] (II) This device may have been added with another device file.
[ 6.666] (II) config/udev: Adding input device Logitech M510 (/dev/input/event21)
[ 6.666] (**) Logitech M510: Applying InputClass "libinput pointer catchall"
[ 6.666] (II) Using input driver 'libinput' for 'Logitech M510'
[ 6.666] (**) Logitech M510: always reports core events
[ 6.666] (**) Option "Device" "/dev/input/event21"
[ 6.667] (II) event21 - Logitech M510: is tagged by udev as: Mouse
[ 6.667] (II) event21 - Logitech M510: device is a pointer
[ 6.667] (II) event21 - Logitech M510: device removed
[ 6.720] (II) libinput: Logitech M510: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.720] (II) libinput: Logitech M510: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.720] (II) libinput: Logitech M510: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:4051.0007/input/input30/event21"
[ 6.720] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 10)
[ 6.720] (**) Option "AccelerationScheme" "none"
[ 6.720] (**) Logitech M510: (accel) selected scheme none/0
[ 6.720] (**) Logitech M510: (accel) acceleration factor: 2.000
[ 6.720] (**) Logitech M510: (accel) acceleration threshold: 4
[ 6.721] (II) event21 - Logitech M510: is tagged by udev as: Mouse
[ 6.721] (II) event21 - Logitech M510: device is a pointer
[ 6.721] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse0)
[ 6.721] (II) No input driver specified, ignoring this device.
[ 6.721] (II) This device may have been added with another device file.
[ 6.722] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 (/dev/input/event11)
[ 6.722] (**) Hoksi Technology DURGOD Taurus K320: Applying InputClass "libinput keyboard catchall"
[ 6.722] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320'
[ 6.722] (**) Hoksi Technology DURGOD Taurus K320: always reports core events
[ 6.722] (**) Option "Device" "/dev/input/event11"
[ 6.723] (II) event11 - Hoksi Technology DURGOD Taurus K320: is tagged by udev as: Keyboard
[ 6.723] (II) event11 - Hoksi Technology DURGOD Taurus K320: device is a keyboard
[ 6.723] (II) event11 - Hoksi Technology DURGOD Taurus K320: device removed
[ 6.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:2F68:0082.0004/input/input12/event11"
[ 6.763] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320" (type: KEYBOARD, id 11)
[ 6.764] (II) event11 - Hoksi Technology DURGOD Taurus K320: is tagged by udev as: Keyboard
[ 6.764] (II) event11 - Hoksi Technology DURGOD Taurus K320: device is a keyboard
[ 6.765] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 System Control (/dev/input/event16)
[ 6.765] (**) Hoksi Technology DURGOD Taurus K320 System Control: Applying InputClass "libinput keyboard catchall"
[ 6.765] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 System Control'
[ 6.765] (**) Hoksi Technology DURGOD Taurus K320 System Control: always reports core events
[ 6.765] (**) Option "Device" "/dev/input/event16"
[ 6.766] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: is tagged by udev as: Keyboard
[ 6.766] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: device is a keyboard
[ 6.766] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: device removed
[ 6.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input17/event16"
[ 6.780] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 System Control" (type: KEYBOARD, id 12)
[ 6.781] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: is tagged by udev as: Keyboard
[ 6.781] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: device is a keyboard
[ 6.781] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Consumer Control (/dev/input/event17)
[ 6.781] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.781] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Consumer Control'
[ 6.781] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: always reports core events
[ 6.781] (**) Option "Device" "/dev/input/event17"
[ 6.782] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: is tagged by udev as: Keyboard
[ 6.782] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device is a keyboard
[ 6.782] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device removed
[ 6.796] (II) libinput: Hoksi Technology DURGOD Taurus K320 Consumer Control: needs a virtual subdevice
[ 6.796] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input18/event17"
[ 6.796] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Consumer Control" (type: MOUSE, id 13)
[ 6.796] (**) Option "AccelerationScheme" "none"
[ 6.796] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: (accel) selected scheme none/0
[ 6.796] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: (accel) acceleration factor: 2.000
[ 6.796] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: (accel) acceleration threshold: 4
[ 6.797] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: is tagged by udev as: Keyboard
[ 6.797] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device is a keyboard
[ 6.798] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Keyboard (/dev/input/event18)
[ 6.798] (**) Hoksi Technology DURGOD Taurus K320 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.798] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Keyboard'
[ 6.798] (**) Hoksi Technology DURGOD Taurus K320 Keyboard: always reports core events
[ 6.798] (**) Option "Device" "/dev/input/event18"
[ 6.799] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: is tagged by udev as: Keyboard
[ 6.799] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: device is a keyboard
[ 6.799] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: device removed
[ 6.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input19/event18"
[ 6.816] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Keyboard" (type: KEYBOARD, id 14)
[ 6.817] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: is tagged by udev as: Keyboard
[ 6.817] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: device is a keyboard
[ 6.818] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Mouse (/dev/input/event19)
[ 6.818] (**) Hoksi Technology DURGOD Taurus K320 Mouse: Applying InputClass "libinput pointer catchall"
[ 6.818] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Mouse'
[ 6.818] (**) Hoksi Technology DURGOD Taurus K320 Mouse: always reports core events
[ 6.818] (**) Option "Device" "/dev/input/event19"
[ 6.819] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: is tagged by udev as: Mouse
[ 6.819] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: device is a pointer
[ 6.819] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: device removed
[ 6.850] (II) libinput: Hoksi Technology DURGOD Taurus K320 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.850] (II) libinput: Hoksi Technology DURGOD Taurus K320 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.850] (II) libinput: Hoksi Technology DURGOD Taurus K320 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.850] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input20/event19"
[ 6.850] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Mouse" (type: MOUSE, id 15)
[ 6.850] (**) Option "AccelerationScheme" "none"
[ 6.850] (**) Hoksi Technology DURGOD Taurus K320 Mouse: (accel) selected scheme none/0
[ 6.850] (**) Hoksi Technology DURGOD Taurus K320 Mouse: (accel) acceleration factor: 2.000
[ 6.850] (**) Hoksi Technology DURGOD Taurus K320 Mouse: (accel) acceleration threshold: 4
[ 6.851] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: is tagged by udev as: Mouse
[ 6.851] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: device is a pointer
[ 6.851] (II) config/udev: Adding input device Hoksi Technology DURGOD Taurus K320 Mouse (/dev/input/mouse1)
[ 6.851] (II) No input driver specified, ignoring this device.
[ 6.851] (II) This device may have been added with another device file.
[ 6.852] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event6)
[ 6.852] (II) No input driver specified, ignoring this device.
[ 6.852] (II) This device may have been added with another device file.
[ 6.852] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 6.852] (II) No input driver specified, ignoring this device.
[ 6.852] (II) This device may have been added with another device file.
[ 6.852] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 6.852] (II) No input driver specified, ignoring this device.
[ 6.852] (II) This device may have been added with another device file.
[ 6.852] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 6.852] (II) No input driver specified, ignoring this device.
[ 6.852] (II) This device may have been added with another device file.
[ 6.852] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event20)
[ 6.852] (II) No input driver specified, ignoring this device.
[ 6.852] (II) This device may have been added with another device file.
[ 6.853] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[ 6.853] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.853] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 6.853] (**) Dell WMI hotkeys: always reports core events
[ 6.853] (**) Option "Device" "/dev/input/event10"
[ 6.853] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 6.853] (II) event10 - Dell WMI hotkeys: device is a keyboard
[ 6.854] (II) event10 - Dell WMI hotkeys: device removed
[ 6.893] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:04/wmi_bus/wmi_bus-PNP0C14:04/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11/event10"
[ 6.893] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 6.894] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 6.894] (II) event10 - Dell WMI hotkeys: device is a keyboard
[ 6.894] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 6.894] (II) No input driver specified, ignoring this device.
[ 6.894] (II) This device may have been added with another device file.
[ 6.896] (II) config/udev: Adding input device Dell AIO WMI hotkeys (/dev/input/event5)
[ 6.896] (**) Dell AIO WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.896] (II) Using input driver 'libinput' for 'Dell AIO WMI hotkeys'
[ 6.896] (**) Dell AIO WMI hotkeys: always reports core events
[ 6.896] (**) Option "Device" "/dev/input/event5"
[ 6.896] (II) event5 - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[ 6.896] (II) event5 - Dell AIO WMI hotkeys: device is a keyboard
[ 6.896] (II) event5 - Dell AIO WMI hotkeys: device removed
[ 6.926] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 6.926] (II) XINPUT: Adding extended input device "Dell AIO WMI hotkeys" (type: KEYBOARD, id 17)
[ 6.927] (II) event5 - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[ 6.927] (II) event5 - Dell AIO WMI hotkeys: device is a keyboard
[ 6.930] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 6.930] (II) Using input driver 'libinput' for 'Hoksi Technology DURGOD Taurus K320 Consumer Control'
[ 6.930] (**) Hoksi Technology DURGOD Taurus K320 Consumer Control: always reports core events
[ 6.930] (**) Option "Device" "/dev/input/event17"
[ 6.930] (II) libinput: Hoksi Technology DURGOD Taurus K320 Consumer Control: is a virtual subdevice
[ 6.930] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:2F68:0082.0005/input/input18/event17"
[ 6.930] (II) XINPUT: Adding extended input device "Hoksi Technology DURGOD Taurus K320 Consumer Control" (type: KEYBOARD, id 18)
[ 625.156] (II) event2 - Power Button: device removed
[ 625.194] (II) event3 - Video Bus: device removed
[ 625.264] (II) event1 - Power Button: device removed
[ 625.283] (II) event0 - Sleep Button: device removed
[ 625.300] (II) event21 - Logitech M510: device removed
[ 625.334] (II) event11 - Hoksi Technology DURGOD Taurus K320: device removed
[ 625.350] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: device removed
[ 625.367] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: device removed
[ 625.383] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: device removed
[ 625.417] (II) event10 - Dell WMI hotkeys: device removed
[ 625.450] (II) event5 - Dell AIO WMI hotkeys: device removed
[ 625.483] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device removed
[ 630.473] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 630.473] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 630.473] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 630.473] (--) NVIDIA(GPU-0):
[ 630.517] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): connected
[ 630.517] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): Internal TMDS
[ 630.517] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): 600.0 MHz maximum pixel clock
[ 630.517] (--) NVIDIA(GPU-0):
[ 630.530] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 630.532] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 630.532] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 630.532] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 630.532] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 630.532] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 630.532] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 630.532] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 630.532] (II) NVIDIA(0): Config Options in the README.
[ 630.966] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 630.966] (II) event2 - Power Button: device is a keyboard
[ 630.967] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 630.967] (II) event3 - Video Bus: device is a keyboard
[ 630.968] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 630.968] (II) event1 - Power Button: device is a keyboard
[ 630.969] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 630.969] (II) event0 - Sleep Button: device is a keyboard
[ 630.971] (II) event21 - Logitech M510: is tagged by udev as: Mouse
[ 630.971] (II) event21 - Logitech M510: device is a pointer
[ 630.973] (II) event11 - Hoksi Technology DURGOD Taurus K320: is tagged by udev as: Keyboard
[ 630.973] (II) event11 - Hoksi Technology DURGOD Taurus K320: device is a keyboard
[ 630.974] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: is tagged by udev as: Keyboard
[ 630.974] (II) event16 - Hoksi Technology DURGOD Taurus K320 System Control: device is a keyboard
[ 630.976] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: is tagged by udev as: Keyboard
[ 630.976] (II) event17 - Hoksi Technology DURGOD Taurus K320 Consumer Control: device is a keyboard
[ 630.977] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: is tagged by udev as: Keyboard
[ 630.977] (II) event18 - Hoksi Technology DURGOD Taurus K320 Keyboard: device is a keyboard
[ 630.979] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: is tagged by udev as: Mouse
[ 630.979] (II) event19 - Hoksi Technology DURGOD Taurus K320 Mouse: device is a pointer
[ 630.980] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 630.980] (II) event10 - Dell WMI hotkeys: device is a keyboard
[ 630.981] (II) event5 - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[ 630.981] (II) event5 - Dell AIO WMI hotkeys: device is a keyboardBy the looks of it there are yet some issues.
Offline
#22 2023-06-30 14:42:58
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
Can't open display :0
You need to run xrandr inside an X11 session (or direct it to some running X11 session, but and X11 server is necessary)
[ 5.272] (--) PCI: (0@0:2:0) 8086:3e92:1028:0871 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64
[ 5.272] (--) PCI:*(1@0:0:0) 10de:1d01:1043:85f5 rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/131072You've an dual-GPU system that
[ 5.265] (==) Using config file: "/etc/X11/xorg.conf"
[ 5.266] (==) ServerLayout "Layout0"
[ 5.266] (**) |-->Screen "Screen0" (0)
[ 5.266] (**) | |-->Monitor "Monitor0"
[ 5.266] (**) | |-->Device "Device0"
[ 5.266] (**) |-->Input Device "Keyboard0"
[ 5.266] (**) |-->Input Device "Mouse0" you force to run on the nvidia chip w/ an nvidia-settings generated config file.
That's usually a recipe for disaster, but
[ 5.969] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): connected
[ 5.969] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): Internal TMDS
[ 5.969] (--) NVIDIA(GPU-0): Ancor Communications Inc VS248 (DFP-1): 600.0 MHz maximum pixel clockThere's an output attached to the nvidia chip - and by the looks of it none to the intel one.
And
[ 5.972] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080 it actually defaults to 1920x1080, so the xrandr call should™ be idempotent, but maybe for the "--primary" aspect.
Is
exec_always --no-startup-id "xrandr --output HDMI-0 --primary"sufficient?
Offline
#23 2023-06-30 15:18:08
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
After poking some of my configs I now have a different issue but related to what we are talking.
Invalid MIT-MAGIC-COOKIE-1 key
Can't open display :0It seems like my Xorg configs are messed up.
May be I should re-configure my xserver settings ?
Last edited by ralvez (2023-06-30 15:18:58)
Offline
#24 2023-06-30 15:23:02
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,094
Re: Can login but no desktop [SOLVED]
xauth -v list
hostnamectlAnd "stat" the used authority file.
This seems to be somehow an issue w/ SDDM, https://wiki.archlinux.org/title/SDDM#Hangs_after_login
Offline
#25 2023-06-30 15:37:26
- ralvez
- Member
- From: Canada
- Registered: 2005-12-06
- Posts: 1,730
- Website
Re: Can login but no desktop [SOLVED]
xauth -v list:
Using authority file /home/ralvez/.Xauthority
archiso/unix:0 MIT-MAGIC-COOKIE-1 53956e8e0faad6a14ca6cceb80a85ef6
dragonfly/unix:0 MIT-MAGIC-COOKIE-1 ef9c6917ec3f10b80e75b3cfd55db7bdhostnamectl
Static hostname: dragonfly
Icon name: computer-desktop
Chassis: desktop ?️
Machine ID: 1f7cafd545a94593bcf57c4393ba862a
Boot ID: 3d7fd8d5c9c74ac48fc57b041c8f52ce
Operating System: Arch Linux
Kernel: Linux 6.3.9-arch1-1
Architecture: x86-64
Hardware Vendor: Dell Inc.
Hardware Model: Precision 3630 Tower
Firmware Version: 1.1.6
Firmware Date: Fri 2018-12-14Offline