Arch Linux

winyf

Member

Registered: 2023-07-02

Posts: 3

Corrupted screen resuming from suspend to ram.

Hello. I haven't been able to find anything about this issue online so I'm looking for help here. Whenever I suspend and then resume, the screen is corrupted or randomized and nothing loads. However, I am still able to move the mouse cursor.

Here are what I assume to be relevant lines from dmesg:

[73186.274431] PM: suspend entry (deep)
[73187.196670] Filesystems sync: 0.922 seconds
[73187.512917] Freezing user space processes
[73187.590425] Freezing user space processes completed (elapsed 0.077 seconds)
[73187.590446] OOM killer disabled.
[73187.590450] Freezing remaining freezable tasks
[73187.592065] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[73187.592776] printk: Suspending console(s) (use no_console_suspend to debug)
[73187.678860] ERROR @wl_notify_scan_status : 
[73187.678871] wlp6s0 Scan_results error (-22)
[73187.693729] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[73187.694288] sd 0:0:0:0: [sda] Stopping disk
[73188.840580] ACPI: EC: interrupt blocked
[73189.201418] ACPI: PM: Preparing to enter system sleep state S3
[73189.203607] ACPI: EC: event blocked
[73189.203610] ACPI: EC: EC stopped
[73189.203612] ACPI: PM: Saving platform NVS memory
[73189.207322] Disabling non-boot CPUs ...
[73189.209902] smpboot: CPU 1 is now offline
[73189.211082] ACPI: PM: Low-level resume complete
[73189.211141] ACPI: EC: EC started
[73189.211142] ACPI: PM: Restoring platform NVS memory
[73189.211929] LVT offset 1 assigned for vector 0x400
[73189.211944] LVT offset 1 assigned
[73189.212267] Enabling non-boot CPUs ...
[73189.212745] x86: Booting SMP configuration:
[73189.212748] smpboot: Booting Node 0 Processor 1 APIC 0x1
[73189.214923] process: Switch to broadcast mode on CPU1
[73189.215734] CPU1 is up
[73189.216461] ACPI: PM: Waking up from system sleep state S3
[73189.233018] ACPI: EC: interrupt unblocked
[73189.268930] ACPI: EC: event unblocked
[73189.277050] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
[73189.277098] radeon 0000:01:05.0: WB enabled
[73189.277101] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00
[73189.279734] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038
[73189.279968] debugfs: File 'radeon_ring_gfx' in directory '0' already present!
[73189.304576] sd 0:0:0:0: [sda] Starting disk
[73189.305126] ERROR @wl_wowl_ind_wake_reason : 
[73189.305128] Unable to get wake reason, err = -95
[73189.316701] [drm] ring test on 0 succeeded in 0 usecs
[73189.316713] debugfs: File 'radeon_ring_uvd' in directory '0' already present!
[73189.495414] [drm] ring test on 5 succeeded in 1 usecs
[73189.495422] [drm] UVD initialized successfully.
[73189.495447] [drm] ib test on ring 0 succeeded in 0 usecs
[73189.592274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[73189.666267] ata2.00: configured for UDMA/100
[73189.674869] usb 6-3: reset full-speed USB device number 2 using ohci-pci
[73189.861442] usb 3-2: reset high-speed USB device number 2 using ehci-pci
[73190.064446] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[73190.091391] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
[73190.091398] clocksource:                       'hpet' wd_nsec: 505444686 wd_now: bf9936 wd_last: 512b7e mask: ffffffff
[73190.091401] clocksource:                       'tsc' cs_nsec: 506717512 cs_now: cda559c6 cs_last: 885a751e mask: ffffffffffffffff
[73190.091403] clocksource:                       Clocksource 'tsc' skewed 1272826 ns (1 ms) over watchdog 'hpet' interval of 505444686 ns (505 ms)
[73190.091406] clocksource:                       'tsc' is current clocksource.
[73190.091417] tsc: Marking TSC unstable due to clocksource watchdog
[73190.091429] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[73190.091430] sched_clock: Marking unstable (73190099479709, -9405280)<-(73190155777934, -64348742)
[73190.090276] clocksource: Checking clocksource tsc synchronization from CPU 1 to CPUs 0.
[73190.090353] clocksource: Switched to clocksource hpet
[73190.170170] [drm] ib test on ring 5 succeeded
[73192.983408] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[73192.987893] ata1.00: configured for UDMA/100
[73196.536510] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.536522] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.536530] OOM killer enabled.
[73196.536535] Restarting tasks ... 
[73196.545956] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.546014] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.546197] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.546202] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.546329] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.546334] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.547036] pci_bus 0000:80: Allocating resources
[73196.547044] pci 0000:00:14.4: bridge window [mem 0x00100000-0x000fffff pref] to [bus 80-8f] add_size 200000 add_align 100000
[73196.547052] pci 0000:00:14.4: bridge window [mem 0x00100000-0x000fffff] to [bus 80-8f] add_size 200000 add_align 100000
[73196.547067] pci 0000:00:14.4: BAR 14: assigned [mem 0xd4500000-0xd46fffff]
[73196.547074] pci 0000:00:14.4: BAR 15: assigned [mem 0xd4700000-0xd48fffff pref]
[73196.547082] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.547121] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.547127] pci 0000:00:14.4:   bridge window [mem 0xd4500000-0xd46fffff]
[73196.547133] pci 0000:00:14.4:   bridge window [mem 0xd4700000-0xd48fffff pref]
[73196.547239] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.547244] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.547250] pci 0000:00:14.4:   bridge window [mem 0xd4500000-0xd46fffff]
[73196.547256] pci 0000:00:14.4:   bridge window [mem 0xd4700000-0xd48fffff pref]
[73196.547380] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[73196.547385] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[73196.547392] pci 0000:00:14.4:   bridge window [mem 0xd4500000-0xd46fffff]
[73196.547397] pci 0000:00:14.4:   bridge window [mem 0xd4700000-0xd48fffff pref]
[73196.552675] done.
[73196.552731] random: crng reseeded on system resumption
[73196.678316] video LNXVIDEO:00: Restoring backlight state
[73196.703471] PM: suspend exit
[73205.700440] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[73206.703498] radeon 0000:01:05.0: ring 0 stalled for more than 10090msec
[73206.703518] radeon 0000:01:05.0: GPU lockup (current fence id 0x00000000004c3a1a last fence id 0x00000000004c3a37 on ring 0)
[73206.713121] radeon 0000:01:05.0: Saved 937 dwords of commands on ring 0.
[73206.713148] radeon 0000:01:05.0: GPU softreset: 0x00000019
[73206.713156] radeon 0000:01:05.0:   R_008010_GRBM_STATUS      = 0xE57034E0
[73206.713163] radeon 0000:01:05.0:   R_008014_GRBM_STATUS2     = 0x00110103
[73206.713169] radeon 0000:01:05.0:   R_000E50_SRBM_STATUS      = 0x20000040
[73206.713174] radeon 0000:01:05.0:   R_008674_CP_STALLED_STAT1 = 0x01000000
[73206.713179] radeon 0000:01:05.0:   R_008678_CP_STALLED_STAT2 = 0x00001002
[73206.713184] radeon 0000:01:05.0:   R_00867C_CP_BUSY_STAT     = 0x00028486
[73206.713189] radeon 0000:01:05.0:   R_008680_CP_STAT          = 0x80838645
[73206.713194] radeon 0000:01:05.0:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
[73206.767075] radeon 0000:01:05.0: R_008020_GRBM_SOFT_RESET=0x00007FEF
[73206.767135] radeon 0000:01:05.0: SRBM_SOFT_RESET=0x00000100
[73206.769245] radeon 0000:01:05.0:   R_008010_GRBM_STATUS      = 0xA0003030
[73206.769250] radeon 0000:01:05.0:   R_008014_GRBM_STATUS2     = 0x00000003
[73206.769256] radeon 0000:01:05.0:   R_000E50_SRBM_STATUS      = 0x20008040
[73206.769261] radeon 0000:01:05.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
[73206.769266] radeon 0000:01:05.0:   R_008678_CP_STALLED_STAT2 = 0x00000000
[73206.769271] radeon 0000:01:05.0:   R_00867C_CP_BUSY_STAT     = 0x00000000
[73206.769276] radeon 0000:01:05.0:   R_008680_CP_STAT          = 0x80100000
[73206.769281] radeon 0000:01:05.0:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
[73206.769291] radeon 0000:01:05.0: GPU reset succeeded, trying to resume
[73206.789479] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
[73206.789534] radeon 0000:01:05.0: WB enabled
[73206.789541] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00
[73206.792350] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038
[73206.792590] debugfs: File 'radeon_ring_gfx' in directory '0' already present!
[73206.824333] [drm] ring test on 0 succeeded in 1 usecs
[73206.824337] debugfs: File 'radeon_ring_uvd' in directory '0' already present!
[73207.004392] [drm] ring test on 5 succeeded in 1 usecs
[73207.004398] [drm] UVD initialized successfully.
[73208.973477] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait timed out.
[73208.973723] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on GFX ring (-110).

Any help is appreciated. Apologies if this is in the wrong place.

seth

Member

From: Don't DM me only for attention

Registered: 2012-09-03

Posts: 73,783

Re: Corrupted screen resuming from suspend to ram.

lspci
loginctl session-status

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc