You are not logged in.

Pages: 1

#1 2023-07-20 09:51:16

fch07
Member
Registered: 2021-09-22
Posts: 71

µSD sometimes recognized, sometimes not

I was using a µSD and it was not recognized at first..then aftera few hours maybe after a reboot also it was recognized...then I need to use it again and it was not recognized. What could it be?

Offline

#2 2023-07-20 11:08:25

schard
Forum Moderator
From: Hannover
Registered: 2016-05-06
Posts: 2,563
Website

Re: µSD sometimes recognized, sometimes not

Could be anything, as you provided zero information.
If you want an educated guess, at least show us your dmesg output, lsblk and other relevant information.

Inofficial first vice president of the Rust Evangelism Strike Force

Offline

#3 2023-07-20 12:18:46

fch07
Member
Registered: 2021-09-22
Posts: 71

Re: µSD sometimes recognized, sometimes not

schard wrote:

Could be anything, as you provided zero information.
If you want an educated guess, at least show us your dmesg output, lsblk and other relevant information.

If I know what logs to get, I would have got them.
here's dmesg:

[    0.000000] microcode: microcode updated early to revision 0xf2, date = 2022-12-26
[    0.000000] Linux version 6.1.39-1-lts (linux-lts@archlinux) (gcc (GCC) 13.1.1 20230714, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=b79cd902-1cf9-4c76-af9d-f7e43569b20e rw cryptdevice=UUID=4dca7113-449f-4c54-8acc-f95fd63c251b:cryptlvm rootfstype=ext4 loglevel=3 quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a834fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a835000-0x000000007aa3cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007aa3d000-0x000000007aa45fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007aa46000-0x000000007aa59fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007aa5a000-0x000000007aa5afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007aa5b000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffa4ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by EDK II
[    0.000000] efi: SMBIOS=0x7aa1c000 SMBIOS 3.0=0x7aa1a000 ACPI=0x7aa59000 ACPI 2.0=0x7aa59014 MEMATTR=0x77e08198 INITRD=0x77df1e98 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Star Labs LabTop/LabTop, BIOS 8.50 06/14/2023
[    0.000000] tsc: Detected 2000.000 MHz processor
[    0.000000] tsc: Detected 1999.968 MHz TSC
[    0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000014] last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000148] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000793] last_pfn = 0x7aa5b max_arch_pfn = 0x400000000
[    0.007230] Using GB pages for direct mapping
[    0.007385] Secure boot disabled
[    0.007385] RAMDISK: [mem 0x6fd40000-0x711a3fff]
[    0.007389] ACPI: Early table checksum verification disabled
[    0.007391] ACPI: RSDP 0x000000007AA59014 000024 (v02 COREv4)
[    0.007394] ACPI: XSDT 0x000000007AA580E8 000074 (v01 COREv4 COREBOOT 00000000      01000013)
[    0.007399] ACPI: FACP 0x000000007AA57000 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007402] ACPI: DSDT 0x000000007AA52000 004336 (v02 COREv4 COREBOOT 20220930 INTL 20230331)
[    0.007405] ACPI: FACS 0x000000007AA73240 000040
[    0.007407] ACPI: SSDT 0x000000007AA50000 001877 (v02 COREv4 COREBOOT 0000002A CORE 20230331)
[    0.007409] ACPI: MCFG 0x000000007AA4F000 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007411] ACPI: TPM2 0x000000007AA4E000 00004C (v04 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007413] ACPI: LPIT 0x000000007AA4D000 000094 (v00 COREv4 COREBOOT 0000002A CORE 20230331)
[    0.007415] ACPI: APIC 0x000000007AA4C000 000092 (v03 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007418] ACPI: DMAR 0x000000007AA4B000 000088 (v01 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007420] ACPI: DBG2 0x000000007AA4A000 000061 (v00 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007422] ACPI: HPET 0x000000007AA49000 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230331)
[    0.007424] ACPI: BGRT 0x000000007AA48000 000038 (v01 INTEL  EDK2     00000002      01000013)
[    0.007426] ACPI: Reserving FACP table memory at [mem 0x7aa57000-0x7aa57113]
[    0.007427] ACPI: Reserving DSDT table memory at [mem 0x7aa52000-0x7aa56335]
[    0.007428] ACPI: Reserving FACS table memory at [mem 0x7aa73240-0x7aa7327f]
[    0.007428] ACPI: Reserving SSDT table memory at [mem 0x7aa50000-0x7aa51876]
[    0.007429] ACPI: Reserving MCFG table memory at [mem 0x7aa4f000-0x7aa4f03b]
[    0.007429] ACPI: Reserving TPM2 table memory at [mem 0x7aa4e000-0x7aa4e04b]
[    0.007430] ACPI: Reserving LPIT table memory at [mem 0x7aa4d000-0x7aa4d093]
[    0.007431] ACPI: Reserving APIC table memory at [mem 0x7aa4c000-0x7aa4c091]
[    0.007431] ACPI: Reserving DMAR table memory at [mem 0x7aa4b000-0x7aa4b087]
[    0.007432] ACPI: Reserving DBG2 table memory at [mem 0x7aa4a000-0x7aa4a060]
[    0.007433] ACPI: Reserving HPET table memory at [mem 0x7aa49000-0x7aa49037]
[    0.007433] ACPI: Reserving BGRT table memory at [mem 0x7aa48000-0x7aa48037]
[    0.007547] No NUMA configuration found
[    0.007548] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[    0.007551] NODE_DATA(0) allocated [mem 0x27effb000-0x27effffff]
[    0.007571] Zone ranges:
[    0.007572]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007573]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007574]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.007575]   Device   empty
[    0.007576] Movable zone start for each node
[    0.007576] Early memory node ranges
[    0.007577]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.007578]   node   0: [mem 0x0000000000100000-0x000000007a834fff]
[    0.007579]   node   0: [mem 0x000000007aa3d000-0x000000007aa45fff]
[    0.007579]   node   0: [mem 0x000000007aa5a000-0x000000007aa5afff]
[    0.007580]   node   0: [mem 0x0000000100000000-0x000000027effffff]
[    0.007581] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.007585] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007602] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.011083] On node 0, zone DMA32: 520 pages in unavailable ranges
[    0.011084] On node 0, zone DMA32: 20 pages in unavailable ranges
[    0.023193] On node 0, zone Normal: 21925 pages in unavailable ranges
[    0.023227] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.023240] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.023977] ACPI: PM-Timer IO Port: 0x1808
[    0.023982] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.024014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.024016] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.024017] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.024020] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.024021] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.024026] e820: update [mem 0x7766e000-0x77695fff] usable ==> reserved
[    0.024032] TSC deadline timer available
[    0.024033] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.024041] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.024042] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.024043] PM: hibernation: Registered nosave memory: [mem 0x7766e000-0x77695fff]
[    0.024044] PM: hibernation: Registered nosave memory: [mem 0x7a835000-0x7aa3cfff]
[    0.024045] PM: hibernation: Registered nosave memory: [mem 0x7aa46000-0x7aa59fff]
[    0.024046] PM: hibernation: Registered nosave memory: [mem 0x7aa5b000-0x7fffffff]
[    0.024047] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xffa0ffff]
[    0.024047] PM: hibernation: Registered nosave memory: [mem 0xffa10000-0xffa4ffff]
[    0.024048] PM: hibernation: Registered nosave memory: [mem 0xffa50000-0xffffffff]
[    0.024049] [mem 0x80000000-0xffa0ffff] available for PCI devices
[    0.024050] Booting paravirtualized kernel on bare hardware
[    0.024052] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.028531] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.028692] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.028696] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.028698] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.028712] Fallback order for Node 0: 0 
[    0.028714] Built 1 zonelists, mobility grouping on.  Total pages: 2036558
[    0.028715] Policy zone: Normal
[    0.028716] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=b79cd902-1cf9-4c76-af9d-f7e43569b20e rw cryptdevice=UUID=4dca7113-449f-4c54-8acc-f95fd63c251b:cryptlvm rootfstype=ext4 loglevel=3 quiet
[    0.028775] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-lts cryptdevice=UUID=4dca7113-449f-4c54-8acc-f95fd63c251b:cryptlvm", will be passed to user space.
[    0.028809] random: crng init done
[    0.029212] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.029420] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.029594] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.029605] software IO TLB: area num 8.
[    0.058595] Memory: 7941052K/8281976K available (16391K kernel code, 2138K rwdata, 11080K rodata, 2148K init, 5352K bss, 340664K reserved, 0K cma-reserved)
[    0.058693] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.058704] Kernel/User page tables isolation: enabled
[    0.058717] ftrace: allocating 46469 entries in 182 pages
[    0.065453] ftrace: allocated 182 pages with 5 groups
[    0.066040] Dynamic Preempt: voluntary
[    0.066069] rcu: Preemptible hierarchical RCU implementation.
[    0.066070] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.066071] 	Trampoline variant of Tasks RCU enabled.
[    0.066071] 	Rude variant of Tasks RCU enabled.
[    0.066071] 	Tracing variant of Tasks RCU enabled.
[    0.066072] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.066073] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.069605] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.069823] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.070032] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.070073] spurious 8259A interrupt: IRQ7.
[    0.070100] Console: colour dummy device 80x25
[    0.070111] printk: console [tty0] enabled
[    0.070129] ACPI: Core revision 20220331
[    0.070176] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.070177] APIC: Switch to symmetric I/O mode setup
[    0.070179] DMAR: Host address width 39
[    0.070180] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.070187] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.070189] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.070192] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.070194] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.070196] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.070197] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.070198] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.071933] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.071935] x2apic enabled
[    0.071950] Switched APIC routing to cluster x2apic.
[    0.075948] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns
[    0.075953] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.60 BogoMIPS (lpj=6666560)
[    0.075955] pid_max: default: 32768 minimum: 301
[    0.077390] LSM: Security Framework initializing
[    0.077396] landlock: Up and running.
[    0.077397] Yama: becoming mindful.
[    0.077403] LSM support for eBPF active
[    0.077431] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.077447] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.077633] x86/cpu: SGX disabled by BIOS.
[    0.077638] CPU0: Thermal monitoring enabled (TM1)
[    0.077675] process: using mwait in idle threads
[    0.077677] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.077678] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.077682] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.077683] Spectre V2 : Mitigation: IBRS
[    0.077684] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.077685] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.077685] RETBleed: Mitigation: IBRS
[    0.077687] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.077687] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.077689] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.077694] MDS: Mitigation: Clear CPU buffers
[    0.077695] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.077698] SRBDS: Mitigation: Microcode
[    0.079285] Freeing SMP alternatives memory: 40K
[    0.079285] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.079285] cblist_init_generic: Setting adjustable number of callback queues.
[    0.079285] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.079285] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.079285] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.079285] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.079285] ... version:                4
[    0.079285] ... bit width:              48
[    0.079285] ... generic registers:      4
[    0.079285] ... value mask:             0000ffffffffffff
[    0.079285] ... max period:             00007fffffffffff
[    0.079285] ... fixed-purpose events:   3
[    0.079285] ... event mask:             000000070000000f
[    0.079285] Estimated ratio of average max frequency by base frequency (times 1024): 1894
[    0.079285] rcu: Hierarchical SRCU implementation.
[    0.079285] rcu: 	Max phase no-delay instances is 1000.
[    0.079285] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.079285] smp: Bringing up secondary CPUs ...
[    0.079285] x86: Booting SMP configuration:
[    0.079285] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.083453] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.083453] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.083453]  #5 #6 #7
[    0.083453] smp: Brought up 1 node, 8 CPUs
[    0.083453] smpboot: Max logical packages: 1
[    0.083453] smpboot: Total of 8 processors activated (32012.80 BogoMIPS)
[    0.086231] devtmpfs: initialized
[    0.086231] x86/mm: Memory block size: 128MB
[    0.086535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.086535] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.086535] pinctrl core: initialized pinctrl subsystem
[    0.086535] PM: RTC time: 08:14:44, date: 2023-07-20
[    0.086579] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.086727] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.086773] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.086819] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.086830] audit: initializing netlink subsys (disabled)
[    0.086834] audit: type=2000 audit(1689840884.009:1): state=initialized audit_enabled=0 res=1
[    0.086834] thermal_sys: Registered thermal governor 'fair_share'
[    0.086834] thermal_sys: Registered thermal governor 'bang_bang'
[    0.086834] thermal_sys: Registered thermal governor 'step_wise'
[    0.086834] thermal_sys: Registered thermal governor 'user_space'
[    0.086834] thermal_sys: Registered thermal governor 'power_allocator'
[    0.086834] cpuidle: using governor ladder
[    0.086834] cpuidle: using governor menu
[    0.086834] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.086834] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.086834] PCI: not using MMCONFIG
[    0.086834] PCI: Using configuration type 1 for base access
[    0.089679] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.099315] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.099315] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.099315] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.099315] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.101488] ACPI: Added _OSI(Module Device)
[    0.101488] ACPI: Added _OSI(Processor Device)
[    0.101488] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.101488] ACPI: Added _OSI(Processor Aggregator Device)
[    0.101589] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.111437] ACPI: EC: EC started
[    0.111437] ACPI: EC: interrupt blocked
[    0.113816] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.113818] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.113819] ACPI: Interpreter enabled
[    0.113830] ACPI: PM: (supports S0 S3 S4 S5)
[    0.113831] ACPI: Using IOAPIC for interrupt routing
[    0.113849] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.114085] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.114098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.114099] PCI: Ignoring E820 reservations for host bridge windows
[    0.118345] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.118350] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.118377] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.118979] PCI host bridge to bus 0000:00
[    0.118981] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.118983] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.118984] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.118986] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.118987] pci_bus 0000:00: root bus resource [mem 0x27f000000-0x7fffffffff window]
[    0.118988] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.118989] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.118991] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.119014] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.119101] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.119109] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.119114] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.119118] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.119131] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.119134] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.119213] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.119222] pci 0000:00:04.0: reg 0x10: [mem 0x91220000-0x91227fff 64bit]
[    0.119349] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.119369] pci 0000:00:14.0: reg 0x10: [mem 0x91200000-0x9120ffff 64bit]
[    0.119431] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.119521] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.119540] pci 0000:00:14.2: reg 0x10: [mem 0x91232000-0x91232fff 64bit]
[    0.119660] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.119683] pci 0000:00:15.0: reg 0x10: [mem 0x91233000-0x91233fff 64bit]
[    0.119864] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.119877] pci 0000:00:17.0: reg 0x10: [mem 0x91230000-0x91231fff]
[    0.119885] pci 0000:00:17.0: reg 0x14: [mem 0x91238000-0x912380ff]
[    0.119893] pci 0000:00:17.0: reg 0x18: [io  0x1060-0x1067]
[    0.119902] pci 0000:00:17.0: reg 0x1c: [io  0x1068-0x106b]
[    0.119910] pci 0000:00:17.0: reg 0x20: [io  0x1040-0x105f]
[    0.119918] pci 0000:00:17.0: reg 0x24: [mem 0x91237000-0x912377ff]
[    0.119959] pci 0000:00:17.0: PME# supported from D3hot
[    0.120019] pci 0000:00:19.0: [8086:9d66] type 00 class 0x118000
[    0.120042] pci 0000:00:19.0: reg 0x10: [mem 0xfe030000-0xfe030fff 64bit]
[    0.120058] pci 0000:00:19.0: reg 0x18: [mem 0x91235000-0x91235fff 64bit]
[    0.120233] pci 0000:00:1c.0: [8086:9d15] type 01 class 0x060400
[    0.120309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.120528] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.120604] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.120748] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.120920] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.120934] pci 0000:00:1f.2: reg 0x10: [mem 0x91228000-0x9122bfff]
[    0.121049] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.121070] pci 0000:00:1f.3: reg 0x10: [mem 0x9122c000-0x9122ffff 64bit]
[    0.121101] pci 0000:00:1f.3: reg 0x20: [mem 0x91210000-0x9121ffff 64bit]
[    0.121148] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.121283] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.121344] pci 0000:00:1f.4: reg 0x10: [mem 0x91239000-0x912390ff 64bit]
[    0.121415] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.121546] pci 0000:00:1f.5: [8086:9d24] type 00 class 0x000000
[    0.121564] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.121989] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000
[    0.122072] pci 0000:01:00.0: reg 0x10: [mem 0x91000000-0x91001fff 64bit]
[    0.122361] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.123408] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.123412] pci 0000:00:1c.0:   bridge window [mem 0x91000000-0x910fffff]
[    0.123720] pci 0000:02:00.0: [1987:5012] type 00 class 0x010802
[    0.123767] pci 0000:02:00.0: reg 0x10: [mem 0x91100000-0x91103fff 64bit]
[    0.124663] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.124666] pci 0000:00:1d.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.126021] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.126082] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.126082] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.126095] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.126160] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.126226] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.126291] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.126357] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.127649] ACPI: EC: interrupt unblocked
[    0.127650] ACPI: EC: event unblocked
[    0.127662] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.127663] ACPI: EC: GPE=0x50
[    0.127665] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[    0.127666] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.127700] iommu: Default domain type: Translated 
[    0.127700] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.127700] SCSI subsystem initialized
[    0.127700] libata version 3.00 loaded.
[    0.127700] ACPI: bus type USB registered
[    0.127700] usbcore: registered new interface driver usbfs
[    0.127700] usbcore: registered new interface driver hub
[    0.127700] usbcore: registered new device driver usb
[    0.127700] pps_core: LinuxPPS API ver. 1 registered
[    0.127700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.127700] PTP clock support registered
[    0.127700] EDAC MC: Ver: 3.0.0
[    0.127700] Registered efivars operations
[    0.127700] NetLabel: Initializing
[    0.127700] NetLabel:  domain hash size = 128
[    0.127700] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.127700] NetLabel:  unlabeled traffic allowed by default
[    0.127700] mctp: management component transport protocol core
[    0.127700] NET: Registered PF_MCTP protocol family
[    0.127700] PCI: Using ACPI for IRQ routing
[    0.157394] PCI: pci_cache_line_size set to 64 bytes
[    0.158441] e820: reserve RAM buffer [mem 0x7766e000-0x77ffffff]
[    0.158444] e820: reserve RAM buffer [mem 0x7a835000-0x7bffffff]
[    0.158445] e820: reserve RAM buffer [mem 0x7aa46000-0x7bffffff]
[    0.158446] e820: reserve RAM buffer [mem 0x7aa5b000-0x7bffffff]
[    0.158447] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    0.158468] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.158468] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.158468] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.158468] vgaarb: loaded
[    0.159883] clocksource: Switched to clocksource tsc-early
[    0.159982] VFS: Disk quotas dquot_6.6.0
[    0.159994] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.160035] pnp: PnP ACPI init
[    0.160182] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.160185] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.160186] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.160188] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.160189] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.160191] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved
[    0.160193] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.160194] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.160384] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.160414] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.160479] pnp: PnP ACPI: found 6 devices
[    0.165899] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.165969] NET: Registered PF_INET protocol family
[    0.166056] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.167618] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.167641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.167683] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.167873] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.168112] TCP: Hash tables configured (established 65536 bind 65536)
[    0.168183] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.168214] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.168237] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.168283] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.168290] NET: Registered PF_XDP protocol family
[    0.168302] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.168315] pci 0000:00:1c.0:   bridge window [mem 0x91000000-0x910fffff]
[    0.168325] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.168337] pci 0000:00:1d.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.168345] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.168347] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.168349] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[    0.168351] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.168352] pci_bus 0000:00: resource 8 [mem 0x27f000000-0x7fffffffff window]
[    0.168354] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.168356] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
[    0.168358] pci_bus 0000:01: resource 1 [mem 0x91000000-0x910fffff]
[    0.168360] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
[    0.169207] PCI: CLS 64 bytes, default 64
[    0.169221] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.169222] software IO TLB: mapped [mem 0x000000007366e000-0x000000007766e000] (64MB)
[    0.169252] Trying to unpack rootfs image as initramfs...
[    0.170203] Initialise system trusted keyrings
[    0.170214] Key type blacklist registered
[    0.170267] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.172003] zbud: loaded
[    0.172232] integrity: Platform Keyring initialized
[    0.172235] integrity: Machine keyring initialized
[    0.182132] Key type asymmetric registered
[    0.182134] Asymmetric key parser 'x509' registered
[    0.278707] Freeing initrd memory: 20880K
[    0.283646] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.283674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.283718] io scheduler mq-deadline registered
[    0.283722] io scheduler kyber registered
[    0.283790] io scheduler bfq registered
[    0.284457] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.284794] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123
[    0.284946] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.286498] ACPI: AC: AC Adapter [ADP1] (off-line)
[    0.286574] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input0
[    0.286600] ACPI: button: Lid Switch [LID0]
[    0.286652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.286790] ACPI: button: Power Button [PWRF]
[    0.287916] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.290815] hpet_acpi_add: no address or irqs in _CRS
[    0.290858] Non-volatile memory driver v1.3
[    0.290860] Linux agpgart interface v0.103
[    0.290893] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.290978] ACPI: bus type drm_connector registered
[    0.292438] ahci 0000:00:17.0: version 3.0
[    0.292718] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    0.292724] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.293113] scsi host0: ahci
[    0.293412] scsi host1: ahci
[    0.293470] ata1: DUMMY
[    0.293474] ata2: SATA max UDMA/133 abar m2048@0x91237000 port 0x91237180 irq 124
[    0.293601] usbcore: registered new interface driver usbserial_generic
[    0.293607] usbserial: USB Serial support registered for generic
[    0.293705] rtc_cmos 00:03: RTC can wake from S4
[    0.294592] rtc_cmos 00:03: registered as rtc0
[    0.294727] rtc_cmos 00:03: setting system clock to 2023-07-20T08:14:44 UTC (1689840884)
[    0.294763] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[    0.295065] intel_pstate: Intel P-state driver initializing
[    0.295679] intel_pstate: HWP enabled
[    0.295749] ledtrig-cpu: registered to indicate activity on CPUs
[    0.295871] efifb: probing for efifb
[    0.295888] efifb: showing boot graphics
[    0.296716] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[    0.296718] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.296720] efifb: scrolling: redraw
[    0.296721] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.296771] fbcon: Deferring console take-over
[    0.296773] fb0: EFI VGA frame buffer device
[    0.296790] hid: raw HID events driver (C) Jiri Kosina
[    0.296849] intel_pmc_core INT33A1:00:  initialized
[    0.296920] drop_monitor: Initializing network drop monitor service
[    0.301997] ACPI: battery: Slot [BAT0] (battery present)
[    0.312298] Initializing XFRM netlink socket
[    0.312417] NET: Registered PF_INET6 protocol family
[    0.316669] Segment Routing with IPv6
[    0.316671] RPL Segment Routing with IPv6
[    0.316682] In-situ OAM (IOAM) with IPv6
[    0.316709] NET: Registered PF_PACKET protocol family
[    0.317421] microcode: sig=0x806ea, pf=0x80, revision=0xf2
[    0.317652] microcode: Microcode Update Driver: v2.2.
[    0.317658] IPI shorthand broadcast: enabled
[    0.317684] sched_clock: Marking stable (311333160, 5997632)->(341235006, -23904214)
[    0.318002] registered taskstats version 1
[    0.318593] Loading compiled-in X.509 certificates
[    0.322273] Loaded X.509 cert 'Build time autogenerated kernel key: 9b3ac7170091240475d02ee9a172c6d631d16669'
[    0.322680] zswap: loaded using pool lz4/z3fold
[    0.323085] Key type .fscrypt registered
[    0.323087] Key type fscrypt-provisioning registered
[    0.324438] PM:   Magic number: 15:523:220
[    0.324484] dmi id: hash matches
[    0.324567] RAS: Correctable Errors collector initialized.
[    0.603173] ata2: SATA link down (SStatus 4 SControl 300)
[    0.605764] Freeing unused decrypted memory: 2036K
[    0.606611] Freeing unused kernel image (initmem) memory: 2148K
[    0.606753] Write protecting the kernel read-only data: 30720k
[    0.608079] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.608478] Freeing unused kernel image (rodata/data gap) memory: 1208K
[    0.648459] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.648463] rodata_test: all tests were successful
[    0.648464] x86/mm: Checking user space page tables
[    0.684444] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.684460] Run /init as init process
[    0.684461]   with arguments:
[    0.684462]     /init
[    0.684463]   with environment:
[    0.684463]     HOME=/
[    0.684464]     TERM=linux
[    0.684464]     BOOT_IMAGE=/vmlinuz-linux-lts
[    0.684465]     cryptdevice=UUID=4dca7113-449f-4c54-8acc-f95fd63c251b:cryptlvm
[    0.781860] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.789542] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.789549] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.789771] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.789781] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.789875] cryptd: max_cpu_qlen set to 1000
[    0.790879] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    0.791166] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.791171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.791175] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.791224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.791228] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.791230] usb usb1: Product: xHCI Host Controller
[    0.791232] usb usb1: Manufacturer: Linux 6.1.39-1-lts xhci-hcd
[    0.791234] usb usb1: SerialNumber: 0000:00:14.0
[    0.791376] hub 1-0:1.0: USB hub found
[    0.791397] hub 1-0:1.0: 12 ports detected
[    0.791811] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.791814] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.791817] usb usb2: Product: xHCI Host Controller
[    0.791818] usb usb2: Manufacturer: Linux 6.1.39-1-lts xhci-hcd
[    0.791820] usb usb2: SerialNumber: 0000:00:14.0
[    0.791902] hub 2-0:1.0: USB hub found
[    0.791918] hub 2-0:1.0: 6 ports detected
[    0.806191] AVX2 version of gcm_enc/dec engaged.
[    0.806231] AES CTR mode by8 optimization enabled
[    0.814009] nvme nvme0: pci function 0000:02:00.0
[    0.819455] nvme nvme0: missing or invalid SUBNQN field.
[    0.819480] nvme nvme0: Shutdown timeout set to 10 seconds
[    0.820827] nvme nvme0: 8/0/0 default/read/poll queues
[    0.821121] nvme nvme0: ctrl returned bogus length: 16 for NVME_NIDT_EUI64
[    0.821156] nvme nvme0: Ignoring bogus Namespace Identifiers
[    0.823710]  nvme0n1: p1 p2
[    0.859792] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.881450] device-mapper: uevent: version 1.0.3
[    0.881495] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.899630] Key type encrypted registered
[    0.909627] fbcon: Taking over console
[    0.909759] Console: switching to colour frame buffer device 240x67
[    1.042843] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.166190] tsc: Refined TSC clocksource calibration: 1992.000 MHz
[    1.166212] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[    1.166301] clocksource: Switched to clocksource tsc
[    1.191646] usb 1-4: New USB device found, idVendor=1bcf, idProduct=2085, bcdDevice= 3.21
[    1.191659] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.191665] usb 1-4: Product: HP HD Camera
[    1.191670] usb 1-4: Manufacturer: SunplusIT Inc
[    1.316207] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.458300] usb 1-6: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    1.458314] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.582871] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    1.723847] usb 1-7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    1.723860] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.723866] usb 1-7: Product: USB2.0-CRW
[    1.723871] usb 1-7: Manufacturer: Generic
[    1.723875] usb 1-7: SerialNumber: 20100201396000000
[    1.736054] usbcore: registered new interface driver rtsx_usb
[   20.876450] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none.
[   21.079059] systemd[1]: systemd 253.6-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[   21.079064] systemd[1]: Detected architecture x86-64.
[   21.080932] systemd[1]: Hostname set to <labtop>.
[   21.480196] systemd[1]: bpf-lsm: LSM BPF program attached
[   21.537121] systemd-fstab-generator[962]: Mount point  is not a valid path, ignoring.
[   21.537975] systemd-fstab-generator[962]: Mount point  is not a valid path, ignoring.
[   21.548691] zram: Added device: zram0
[   21.710136] systemd[1]: Queued start job for default target Graphical Interface.
[   21.730635] systemd[1]: Created slice Slice /system/getty.
[   21.731035] systemd[1]: Created slice Slice /system/modprobe.
[   21.731366] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[   21.731619] systemd[1]: Created slice User and Session Slice.
[   21.731700] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   21.731765] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   21.731964] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   21.732005] systemd[1]: Reached target Local Encrypted Volumes.
[   21.732021] systemd[1]: Reached target Login Prompts.
[   21.732033] systemd[1]: Reached target Local Integrity Protected Volumes.
[   21.732054] systemd[1]: Reached target Path Units.
[   21.732074] systemd[1]: Reached target Remote File Systems.
[   21.732086] systemd[1]: Reached target Slice Units.
[   21.732112] systemd[1]: Reached target Local Verity Protected Volumes.
[   21.732188] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   21.733576] systemd[1]: Listening on Process Core Dump Socket.
[   21.733723] systemd[1]: Listening on Journal Socket (/dev/log).
[   21.733864] systemd[1]: Listening on Journal Socket.
[   21.734300] systemd[1]: Listening on udev Control Socket.
[   21.734423] systemd[1]: Listening on udev Kernel Socket.
[   21.735376] systemd[1]: Mounting Huge Pages File System...
[   21.736286] systemd[1]: Mounting POSIX Message Queue File System...
[   21.737212] systemd[1]: Mounting Kernel Debug File System...
[   21.738136] systemd[1]: Mounting Kernel Trace File System...
[   21.739167] systemd[1]: Starting Create List of Static Device Nodes...
[   21.740151] systemd[1]: Starting Load Kernel Module configfs...
[   21.741116] systemd[1]: Starting Load Kernel Module dm_mod...
[   21.742080] systemd[1]: Starting Load Kernel Module drm...
[   21.743066] systemd[1]: Starting Load Kernel Module fuse...
[   21.744049] systemd[1]: Starting Load Kernel Module loop...
[   21.744127] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   21.745929] systemd[1]: Starting Journal Service...
[   21.747865] systemd[1]: Starting Load Kernel Modules...
[   21.747918] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[   21.749084] systemd[1]: Starting Remount Root and Kernel File Systems...
[   21.750533] systemd[1]: Starting Coldplug All udev Devices...
[   21.751889] loop: module loaded
[   21.752750] systemd[1]: Mounted Huge Pages File System.
[   21.752981] systemd[1]: Mounted POSIX Message Queue File System.
[   21.753080] systemd[1]: Mounted Kernel Debug File System.
[   21.753178] systemd[1]: Mounted Kernel Trace File System.
[   21.756427] EXT4-fs (dm-0): re-mounted. Quota mode: none.
[   21.761387] fuse: init (API version 7.37)
[   21.766057] systemd-journald[983]: Collecting audit messages is disabled.
[   21.766476] Asymmetric key parser 'pkcs8' registered
[   21.779533] systemd[1]: Finished Create List of Static Device Nodes.
[   21.780239] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   21.812949] systemd[1]: Finished Load Kernel Module configfs.
[   21.813076] systemd[1]: Started Journal Service.
[   22.021382] systemd-journald[983]: Received client request to flush runtime journal.
[   22.025058] systemd-journald[983]: File /var/log/journal/579a34efcf5f403696b1c20070931411/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   22.421589] zram0: detected capacity change from 0 to 8029184
[   22.461805] input: Intel HID events as /devices/platform/INTC1051:00/input/input4
[   22.527257] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   22.527318] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   22.527367] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000
[   22.527427] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[   22.527888] i2c i2c-0: 2/2 memory slots populated (from DMI)
[   22.529269] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   22.557806] Adding 4014588k swap on /dev/zram0.  Priority:100 extents:1 across:4014588k SSDscFS
[   22.559558] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   22.573379] iTCO_vendor_support: vendor-support=0
[   22.578728] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.579614] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.581192] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   22.581198] cfg80211: failed to load regulatory.db
[   22.584854] intel_rapl_common: Found RAPL domain package
[   22.584856] intel_rapl_common: Found RAPL domain core
[   22.584857] intel_rapl_common: Found RAPL domain uncore
[   22.584858] intel_rapl_common: Found RAPL domain dram
[   22.584859] intel_rapl_common: Found RAPL domain psys
[   22.591842] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   22.591846] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   22.591847] RAPL PMU: hw unit of domain package 2^-14 Joules
[   22.591848] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   22.591849] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   22.591850] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   22.729856] input: STAR0001:00 093A:1336 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-STAR0001:00/0018:093A:1336.0001/input/input7
[   22.730189] input: STAR0001:00 093A:1336 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-STAR0001:00/0018:093A:1336.0001/input/input8
[   22.730655] hid-generic 0018:093A:1336.0001: input,hidraw0: I2C HID v1.00 Mouse [STAR0001:00 093A:1336] on i2c-STAR0001:00
[   22.735617] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   22.757829] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   22.809083] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   22.820653] dw-apb-uart.1: ttyS4 at MMIO 0xfe030000 (irq = 32, base_baud = 115200) is a 16550A
[   22.853035] Intel(R) Wireless WiFi driver for Linux
[   22.865410] iwlwifi 0000:01:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[   23.014089] input: STAR0001:00 093A:1336 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-STAR0001:00/0018:093A:1336.0001/input/input9
[   23.014158] input: STAR0001:00 093A:1336 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-STAR0001:00/0018:093A:1336.0001/input/input10
[   23.014210] hid-multitouch 0018:093A:1336.0001: input,hidraw0: I2C HID v1.00 Mouse [STAR0001:00 093A:1336] on i2c-STAR0001:00
[   23.028076] mousedev: PS/2 mouse device common for all mice
[   23.239636] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[   23.239700] thermal thermal_zone1: failed to read out thermal zone (-61)
[   23.240780] Console: switching to colour dummy device 80x25
[   23.240808] i915 0000:00:02.0: vgaarb: deactivate vga console
[   23.281094] intel_tcc_cooling: Programmable TCC Offset detected
[   23.292284] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   23.293852] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[   23.307076] iwlwifi 0000:01:00.0: base HW address: 7c:2a:31:3c:54:3d, OTP minor version: 0x0
[   23.332940] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   23.333147] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   23.382189] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   23.447113] fbcon: i915drmfb (fb0) is primary device
[   23.702808] mc: Linux media interface: v0.10
[   23.733394] Bluetooth: Core ver 2.22
[   23.733410] NET: Registered PF_BLUETOOTH protocol family
[   23.733411] Bluetooth: HCI device and connection manager initialized
[   23.733413] Bluetooth: HCI socket layer initialized
[   23.733415] Bluetooth: L2CAP socket layer initialized
[   23.733418] Bluetooth: SCO socket layer initialized
[   25.029005] Console: switching to colour frame buffer device 240x67
[   25.050537] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   25.091807] videodev: Linux video capture interface: v2.00
[   25.097664] snd_hda_codec_realtek hdaudioC0D0: ALC269VC: SKU not ready 0x411111f0
[   25.098012] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   25.098018] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.098021] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.098024] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   25.098026] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   25.098028] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   25.098030] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   25.121741] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   25.121815] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   25.121865] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   25.121912] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   25.223064] usbcore: registered new interface driver btusb
[   25.224167] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[   25.225143] Bluetooth: hci0: Device revision is 16
[   25.225146] Bluetooth: hci0: Secure boot is enabled
[   25.225148] Bluetooth: hci0: OTP lock is enabled
[   25.225149] Bluetooth: hci0: API lock is enabled
[   25.225151] Bluetooth: hci0: Debug lock is disabled
[   25.225152] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   25.229166] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[   25.247127] usb 1-4: Found UVC 1.00 device HP HD Camera (1bcf:2085)
[   25.265950] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15
[   25.266040] usbcore: registered new interface driver uvcvideo
[   25.300682] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.300686] Bluetooth: BNEP filters: protocol multicast
[   25.300691] Bluetooth: BNEP socket layer initialized
[   26.940812] Bluetooth: hci0: Waiting for firmware download to complete
[   26.941151] Bluetooth: hci0: Firmware loaded in 1671854 usecs
[   26.941421] Bluetooth: hci0: Waiting for device to boot
[   26.954146] Bluetooth: hci0: Device booted in 12596 usecs
[   26.954195] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[   26.954669] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[   26.957276] Bluetooth: hci0: Applying Intel DDC parameters completed
[   26.958265] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[   27.019892] Bluetooth: MGMT ver 1.22
[   27.041233] NET: Registered PF_ALG protocol family
[   27.863550] wlan0: authenticate with b0:be:76:77:98:57
[   27.874375] wlan0: send auth to b0:be:76:77:98:57 (try 1/3)
[   27.958395] wlan0: authenticate with b0:be:76:77:98:57
[   27.964847] wlan0: send auth to b0:be:76:77:98:57 (try 1/3)
[   28.032509] wlan0: authenticated
[   28.036091] wlan0: associate with b0:be:76:77:98:57 (try 1/3)
[   28.039407] wlan0: RX AssocResp from b0:be:76:77:98:57 (capab=0x11 status=0 aid=2)
[   28.042331] wlan0: associated
[   28.163280] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   29.217031] rfkill: input handler disabled
[   29.462546] Bluetooth: RFCOMM TTY layer initialized
[   29.462558] Bluetooth: RFCOMM socket layer initialized
[   29.462564] Bluetooth: RFCOMM ver 1.11
[   38.693614] systemd-journald[983]: File /var/log/journal/579a34efcf5f403696b1c20070931411/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   39.065636] rfkill: input handler enabled
[   42.345025] rfkill: input handler disabled
[  286.171215] systemd-fstab-generator[3545]: Mount point  is not a valid path, ignoring.
[  286.171554] systemd-fstab-generator[3545]: Mount point  is not a valid path, ignoring.
[10156.454512] wlan0: deauthenticating from b0:be:76:77:98:57 by local choice (Reason: 3=DEAUTH_LEAVING)
[10157.196782] PM: suspend entry (deep)
[10157.200707] Filesystems sync: 0.003 seconds
[10157.208196] Freezing user space processes
[10157.211842] Freezing user space processes completed (elapsed 0.003 seconds)
[10157.211851] OOM killer disabled.
[10157.211854] Freezing remaining freezable tasks
[10157.213489] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[10157.213512] printk: Suspending console(s) (use no_console_suspend to debug)
[10157.512630] ACPI: EC: interrupt blocked
[10157.548326] ACPI: PM: Preparing to enter system sleep state S3
[10157.552813] ACPI: EC: event blocked
[10157.552815] ACPI: EC: EC stopped
[10157.552817] ACPI: PM: Saving platform NVS memory
[10157.552882] Disabling non-boot CPUs ...
[10157.555448] smpboot: CPU 1 is now offline
[10157.558930] smpboot: CPU 2 is now offline
[10157.562263] smpboot: CPU 3 is now offline
[10157.565550] smpboot: CPU 4 is now offline
[10157.568538] smpboot: CPU 5 is now offline
[10157.571369] smpboot: CPU 6 is now offline
[10157.574003] smpboot: CPU 7 is now offline
[10157.578483] ACPI: PM: Low-level resume complete
[10157.578533] ACPI: EC: EC started
[10157.578533] ACPI: PM: Restoring platform NVS memory
[10157.579985] Enabling non-boot CPUs ...
[10157.580036] x86: Booting SMP configuration:
[10157.580037] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10157.582732] CPU1 is up
[10157.582772] smpboot: Booting Node 0 Processor 2 APIC 0x4
[10157.585222] CPU2 is up
[10157.585260] smpboot: Booting Node 0 Processor 3 APIC 0x6
[10157.587997] CPU3 is up
[10157.588037] smpboot: Booting Node 0 Processor 4 APIC 0x1
[10157.589252] CPU4 is up
[10157.589297] smpboot: Booting Node 0 Processor 5 APIC 0x3
[10157.590360] CPU5 is up
[10157.590431] smpboot: Booting Node 0 Processor 6 APIC 0x5
[10157.591635] CPU6 is up
[10157.591675] smpboot: Booting Node 0 Processor 7 APIC 0x7
[10157.593061] CPU7 is up
[10157.596572] ACPI: PM: Waking up from system sleep state S3
[10157.601795] ACPI: EC: interrupt unblocked
[10157.634812] ACPI: EC: event unblocked
[10157.637859] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[10157.637866] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[10157.637873] i915 0000:00:02.0: [drm] [ENCODER:111:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[10157.658288] nvme nvme0: Shutdown timeout set to 10 seconds
[10157.659869] nvme nvme0: 8/0/0 default/read/poll queues
[10157.660027] nvme nvme0: ctrl returned bogus length: 16 for NVME_NIDT_EUI64
[10157.660061] nvme nvme0: Ignoring bogus Namespace Identifiers
[10157.939523] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[10157.945574] ata2: SATA link down (SStatus 4 SControl 300)
[10158.202749] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
[10158.349778] OOM killer enabled.
[10158.349782] Restarting tasks ... done.
[10158.364034] random: crng reseeded on system resumption
[10158.411291] PM: suspend exit
[10158.964363] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[10158.965445] Bluetooth: hci0: Device revision is 16
[10158.965455] Bluetooth: hci0: Secure boot is enabled
[10158.965460] Bluetooth: hci0: OTP lock is enabled
[10158.965464] Bluetooth: hci0: API lock is enabled
[10158.965468] Bluetooth: hci0: Debug lock is disabled
[10158.965473] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[10158.965486] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[10160.822444] Bluetooth: hci0: Waiting for firmware download to complete
[10160.823368] Bluetooth: hci0: Firmware loaded in 1814389 usecs
[10160.823443] Bluetooth: hci0: Waiting for device to boot
[10160.836491] Bluetooth: hci0: Device booted in 12803 usecs
[10160.836508] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[10160.836511] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[10160.839470] Bluetooth: hci0: Applying Intel DDC parameters completed
[10160.840477] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[10160.902304] Bluetooth: MGMT ver 1.22
[10162.803970] wlan0: authenticate with b0:be:76:77:98:57
[10162.815618] wlan0: send auth to b0:be:76:77:98:57 (try 1/3)
[10162.898444] wlan0: authenticate with b0:be:76:77:98:57
[10162.904623] wlan0: send auth to b0:be:76:77:98:57 (try 1/3)
[10162.972775] wlan0: authenticated
[10162.975373] wlan0: associate with b0:be:76:77:98:57 (try 1/3)
[10162.977478] wlan0: RX AssocResp from b0:be:76:77:98:57 (capab=0x11 status=0 aid=2)
[10162.980052] wlan0: associated
[10163.063146] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

On lsblk, it should show mmbclk0, but it's not there.

Offline

#4 2023-07-20 12:25:26

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,456
Website

Re: µSD sometimes recognized, sometimes not

When it's not working, get the output of the following:

uname -a
pacman -Q linux

If the versions differ, reboot.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#5 2023-07-20 12:27:39

fch07
Member
Registered: 2021-09-22
Posts: 71

Re: µSD sometimes recognized, sometimes not

Trilby wrote:

When it's not working, get the output of the following:

uname -a
pacman -Q linux

If the versions differ, reboot.

I will do that, indeed i have been using stable and lts kernels, now I am using stable, and got both upgrades this morning. Willl check if it gets read.
Edit: just tried and it worked with:

uname -a: 
Linux labtop 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64 GNU/Linux

but, pacman -Q linux gives me:

linux 6.4.4.arch1-1

Last edited by fch07 (2023-07-20 12:31:49)

Offline

#6 2023-07-20 12:56:36

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,456
Website

Re: µSD sometimes recognized, sometimes not

Yes, it can continue working after an upgrade if the module was already loaded prior to the upgrade.  So having it work while the versions differ is not informative.  The question is whether it ever fails to work when the versions are the same - and I'm pretty sure the answer would be "no".

You need to reboot after any kernel upgrade in order to use any hardware that had not yet been in used up to that time.  (technically any hardware relying on loadable kernel modules).

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#7 2023-07-20 13:03:37

fch07
Member
Registered: 2021-09-22
Posts: 71

Re: µSD sometimes recognized, sometimes not

Trilby wrote:

Yes, it can continue working after an upgrade if the module was already loaded prior to the upgrade.  So having it work while the versions differ is not informative.  The question is whether it ever fails to work when the versions are the same - and I'm pretty sure the answer would be "no".

You need to reboot after any kernel upgrade in order to use any hardware that had not yet been in used up to that time.  (technically any hardware relying on loadable kernel modules).

Why I got different version? on uname -a and pacman -Q linux, those were both the newly updated versions of lts and stable.
Thanks I am aware of rebooting after every kernel upgrade to load the new kernel.
I reboot into into stable 6.4.4 and it reads the µSD.

Last edited by fch07 (2023-07-20 13:15:06)

Offline

#8 2023-07-20 13:45:54

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,783

Re: µSD sometimes recognized, sometimes not

You're comparing LTS and main kernel in #5

Next time it *doesn't* work, run and post

uname -a
pacman -Qs kernel

Then run

dmesg -W

insert the SD card and post the resulting dmesg output.

There's no trace of you "using" an MMC device in the provided dmesg at all, is it supposed to cover any such attempt? When?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB