You are not logged in.

Pages: 1

#1 2023-07-24 20:53:03

amiria703
Member
Registered: 2023-07-18
Posts: 21

[Solved] Black screen after login to XFCE4

Hi. First sorry if I'm posting wrong. I don't know what logs to provide so please just ask and I'll post it.
Recently I installed xfce environment into my up-to-date arch system and everything worked just fine. But just after a simple re-login or a restart, instead of showing my desktop, I'm facing with a black screen and a portion of my wallpaper on the top-left corner. After removing config files of xfce everything worked again.
I use a dual-monitor setup and on the second monitor I can see my wallpaper completely. The strange part is that I can work with xfce just by clicking and typing around and it just fails to display the content.
I use nouveau driver and I cannot use any other driver for my graphics card as it's too old to support.
How can I overcome this issue?
Thanks for your patience and help.

Last edited by amiria703 (2023-07-25 11:00:25)

Offline

#2 2023-07-24 21:04:21

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,127

Re: [Solved] Black screen after login to XFCE4

Try to disable the compositor, https://wiki.archlinux.org/title/Xfwm#Composite_manager
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

How big is the visible corner, same size as the other monitor?
Do you see the mouse pointer across the entire monitor?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#3 2023-07-25 11:00:06

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:

Problem solved just by disabling compositor! Thanks for you help!

Offline

#4 2023-07-25 14:12:34

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,127

Re: [Solved] Black screen after login to XFCE4

Do the outputs work normally when you then re-enable the compositor manually after the login?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#5 2023-07-25 15:18:33

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:

With compositor (xfwm) enabled:

[    33.979] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    33.980] Current Operating System: Linux amiria703 6.4.4-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 19:19:38 +0000 x86_64
[    33.980] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2fc57bdf-917b-423a-83d8-2b1ecd962b7d rw loglevel=3
[    33.980]  
[    33.980] Current version of pixman: 0.42.2
[    33.980] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    33.980] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    33.980] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 25 18:41:28 2023
[    34.062] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.112] (==) No Layout section.  Using the first Screen section.
[    34.112] (==) No screen section available. Using defaults.
[    34.112] (**) |-->Screen "Default Screen Section" (0)
[    34.112] (**) |   |-->Monitor "<default monitor>"
[    34.113] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    34.113] (==) Automatically adding devices
[    34.113] (==) Automatically enabling devices
[    34.113] (==) Automatically adding GPU devices
[    34.113] (==) Automatically binding GPU devices
[    34.113] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    34.184] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    34.184] 	Entry deleted from font path.
[    34.184] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    34.184] 	Entry deleted from font path.
[    34.241] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    34.241] (==) ModulePath set to "/usr/lib/xorg/modules"
[    34.241] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.241] (II) Module ABI versions:
[    34.241] 	X.Org ANSI C Emulation: 0.4
[    34.241] 	X.Org Video Driver: 25.2
[    34.241] 	X.Org XInput driver : 24.4
[    34.241] 	X.Org Server Extension : 10.0
[    34.256] (++) using VT number 7

[    34.256] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    34.259] (II) xfree86: Adding drm device (/dev/dri/card0)
[    34.259] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    34.267] (--) PCI:*(1@0:0:0) 10de:0326:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, BIOS @ 0x????????/131072
[    34.267] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    34.267] (II) LoadModule: "glx"
[    34.332] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    34.562] (II) Module glx: vendor="X.Org Foundation"
[    34.562] 	compiled for 1.21.1.8, module version = 1.0.0
[    34.562] 	ABI class: X.Org Server Extension, version 10.0
[    34.562] (==) Matched nouveau as autoconfigured driver 0
[    34.562] (==) Matched nv as autoconfigured driver 1
[    34.562] (==) Matched modesetting as autoconfigured driver 2
[    34.562] (==) Matched fbdev as autoconfigured driver 3
[    34.562] (==) Matched vesa as autoconfigured driver 4
[    34.562] (==) Assigned the driver to the xf86ConfigLayout
[    34.563] (II) LoadModule: "nouveau"
[    34.563] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    34.587] (II) Module nouveau: vendor="X.Org Foundation"
[    34.587] 	compiled for 1.21.1.1, module version = 1.0.17
[    34.587] 	Module class: X.Org Video Driver
[    34.587] 	ABI class: X.Org Video Driver, version 25.2
[    34.587] (II) LoadModule: "nv"
[    34.588] (WW) Warning, couldn't open module nv
[    34.588] (EE) Failed to load module "nv" (module does not exist, 0)
[    34.588] (II) LoadModule: "modesetting"
[    34.588] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    34.637] (II) Module modesetting: vendor="X.Org Foundation"
[    34.637] 	compiled for 1.21.1.8, module version = 1.21.1
[    34.637] 	Module class: X.Org Video Driver
[    34.637] 	ABI class: X.Org Video Driver, version 25.2
[    34.637] (II) LoadModule: "fbdev"
[    34.637] (WW) Warning, couldn't open module fbdev
[    34.637] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    34.637] (II) LoadModule: "vesa"
[    34.637] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    34.662] (II) Module vesa: vendor="X.Org Foundation"
[    34.662] 	compiled for 1.21.1.4, module version = 2.6.0
[    34.662] 	Module class: X.Org Video Driver
[    34.662] 	ABI class: X.Org Video Driver, version 25.2
[    34.662] (II) NOUVEAU driver 
[    34.662] (II) NOUVEAU driver for NVIDIA chipset families :
[    34.662] 	RIVA TNT            (NV04)
[    34.662] 	RIVA TNT2           (NV05)
[    34.662] 	GeForce 256         (NV10)
[    34.662] 	GeForce 2           (NV11, NV15)
[    34.662] 	GeForce 4MX         (NV17, NV18)
[    34.662] 	GeForce 3           (NV20)
[    34.662] 	GeForce 4Ti         (NV25, NV28)
[    34.662] 	GeForce FX          (NV3x)
[    34.662] 	GeForce 6           (NV4x)
[    34.662] 	GeForce 7           (G7x)
[    34.662] 	GeForce 8           (G8x)
[    34.662] 	GeForce 9           (G9x)
[    34.662] 	GeForce GTX 2xx/3xx (GT2xx)
[    34.662] 	GeForce GTX 4xx/5xx (GFxxx)
[    34.663] 	GeForce GTX 6xx/7xx (GKxxx)
[    34.663] 	GeForce GTX 9xx     (GMxxx)
[    34.663] 	GeForce GTX 10xx    (GPxxx)
[    34.663] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    34.663] (II) VESA: driver for VESA chipsets: vesa
[    34.670] (II) [drm] nouveau interface version: 1.3.1
[    34.670] (WW) Falling back to old probe method for modesetting
[    34.671] (II) Loading sub module "dri2"
[    34.671] (II) LoadModule: "dri2"
[    34.671] (II) Module "dri2" already built-in
[    34.671] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[    34.671] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    34.671] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    34.671] (==) NOUVEAU(0): RGB weight 888
[    34.671] (==) NOUVEAU(0): Default visual is TrueColor
[    34.671] (==) NOUVEAU(0): Using HW cursor
[    34.671] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    34.671] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    34.671] (==) NOUVEAU(0): Page flipping enabled
[    34.671] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    34.671] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    34.671] (II) NOUVEAU(0): Initializing outputs ...
[    34.710] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    34.769] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    34.803] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    34.803] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    34.803] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    34.803] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    34.840] (II) NOUVEAU(0): EDID for output VGA-1
[    34.840] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    34.840] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    34.840] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    34.840] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    34.840] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    34.840] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    34.899] (II) NOUVEAU(0): EDID for output DVI-I-1
[    34.899] (II) NOUVEAU(0): Manufacturer: SAM  Model: b28  Serial#: 0
[    34.899] (II) NOUVEAU(0): Year: 2013  Week: 43
[    34.899] (II) NOUVEAU(0): EDID Version: 1.3
[    34.899] (II) NOUVEAU(0): Digital Display Input
[    34.899] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 95  vert.: 54
[    34.899] (II) NOUVEAU(0): Gamma: 2.20
[    34.899] (II) NOUVEAU(0): No DPMS capabilities specified
[    34.899] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    34.899] (II) NOUVEAU(0): First detailed timing is preferred mode
[    34.899] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    34.899] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    34.900] (II) NOUVEAU(0): Supported established timings:
[    34.900] (II) NOUVEAU(0): 720x400@70Hz
[    34.900] (II) NOUVEAU(0): 640x480@60Hz
[    34.900] (II) NOUVEAU(0): 640x480@67Hz
[    34.900] (II) NOUVEAU(0): 640x480@72Hz
[    34.900] (II) NOUVEAU(0): 640x480@75Hz
[    34.900] (II) NOUVEAU(0): 800x600@60Hz
[    34.900] (II) NOUVEAU(0): 800x600@72Hz
[    34.900] (II) NOUVEAU(0): 800x600@75Hz
[    34.900] (II) NOUVEAU(0): 832x624@75Hz
[    34.900] (II) NOUVEAU(0): 1024x768@60Hz
[    34.900] (II) NOUVEAU(0): 1024x768@70Hz
[    34.900] (II) NOUVEAU(0): 1024x768@75Hz
[    34.900] (II) NOUVEAU(0): Manufacturer's mask: 0
[    34.900] (II) NOUVEAU(0): Supported detailed timing:
[    34.900] (II) NOUVEAU(0): clock: 65.0 MHz   Image Size:  1124 x 627 mm
[    34.900] (II) NOUVEAU(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    34.900] (II) NOUVEAU(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[    34.900] (II) NOUVEAU(0): Supported detailed timing:
[    34.900] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1124 x 627 mm
[    34.900] (II) NOUVEAU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    34.900] (II) NOUVEAU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    34.900] (II) NOUVEAU(0): Ranges: V min: 24 V max: 75 Hz, H min: 15 H max: 68 kHz, PixClock max 235 MHz
[    34.900] (II) NOUVEAU(0): Monitor name: SAMSUNG
[    34.900] (II) NOUVEAU(0): Supported detailed timing:
[    34.900] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1124 x 627 mm
[    34.900] (II) NOUVEAU(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    34.900] (II) NOUVEAU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    34.900] (II) NOUVEAU(0): Supported detailed timing:
[    34.900] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1124 x 627 mm
[    34.900] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    34.900] (II) NOUVEAU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    34.900] (II) NOUVEAU(0): Supported detailed timing:
[    34.900] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1124 x 627 mm
[    34.900] (II) NOUVEAU(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    34.900] (II) NOUVEAU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    34.900] (II) NOUVEAU(0): Supported detailed timing:
[    34.900] (II) NOUVEAU(0): clock: 27.0 MHz   Image Size:  1124 x 627 mm
[    34.900] (II) NOUVEAU(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    34.900] (II) NOUVEAU(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    34.900] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[    34.901] (II) NOUVEAU(0): EDID (in hex):
[    34.901] (II) NOUVEAU(0): 	00ffffffffffff004c2d280b00000000
[    34.901] (II) NOUVEAU(0): 	2b170103805f36780aee91a3544c9926
[    34.901] (II) NOUVEAU(0): 	0f5054bdee0001010101010101010101
[    34.901] (II) NOUVEAU(0): 	01010101010164190040410026301888
[    34.901] (II) NOUVEAU(0): 	3600647342000018011d007251d01e20
[    34.901] (II) NOUVEAU(0): 	6e28550064734200001e000000fd0018
[    34.901] (II) NOUVEAU(0): 	4b0f4417000a202020202020000000fc
[    34.901] (II) NOUVEAU(0): 	0053414d53554e470a202020202001c9
[    34.901] (II) NOUVEAU(0): 	020325f14d84130514101f0312202122
[    34.901] (II) NOUVEAU(0): 	07162309070783010000e2000f67030c
[    34.901] (II) NOUVEAU(0): 	002000b82d011d80d0721c1620102c25
[    34.901] (II) NOUVEAU(0): 	8064734200009e011d8018711c162058
[    34.901] (II) NOUVEAU(0): 	2c250064734200009e011d00bc52d01e
[    34.901] (II) NOUVEAU(0): 	20b828554064734200001e8c0ad09020
[    34.901] (II) NOUVEAU(0): 	4031200c405500647342000018000000
[    34.901] (II) NOUVEAU(0): 	000000000000000000000000000000f8
[    34.901] (--) NOUVEAU(0): HDMI max TMDS frequency 225000KHz
[    34.901] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    34.901] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[    34.901] (II) NOUVEAU(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    34.901] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    34.902] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    34.902] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    34.902] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    34.902] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    34.936] (II) NOUVEAU(0): EDID for output TV-1
[    34.936] (II) NOUVEAU(0): Output VGA-1 connected
[    34.936] (II) NOUVEAU(0): Output DVI-I-1 connected
[    34.936] (II) NOUVEAU(0): Output TV-1 disconnected
[    34.936] (II) NOUVEAU(0): Using exact sizes for initial modes
[    34.936] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768 +0+0
[    34.936] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768 +0+0
[    34.936] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[    34.936] (II) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[    34.936] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    34.936] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    34.937] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    34.937] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    34.937] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    34.937] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    34.937] (**) NOUVEAU(0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    34.937] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    34.937] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    34.937] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    34.937] (==) NOUVEAU(0): DPI set to (96, 96)
[    34.937] (II) Loading sub module "fb"
[    34.937] (II) LoadModule: "fb"
[    34.937] (II) Module "fb" already built-in
[    34.937] (II) Loading sub module "shadowfb"
[    34.937] (II) LoadModule: "shadowfb"
[    34.937] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    34.955] (II) Module shadowfb: vendor="X.Org Foundation"
[    34.955] 	compiled for 1.21.1.8, module version = 1.0.0
[    34.955] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    34.955] (II) UnloadModule: "modesetting"
[    34.955] (II) Unloading modesetting
[    34.955] (II) UnloadModule: "vesa"
[    34.955] (II) Unloading vesa
[    34.957] (II) NOUVEAU(0): Channel setup complete.
[    34.973] (II) NOUVEAU(0): Hardware support for Present enabled
[    34.974] (II) NOUVEAU(0): [DRI2] Setup complete
[    34.974] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    34.974] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    34.974] (II) Loading sub module "exa"
[    34.974] (II) LoadModule: "exa"
[    34.975] (II) Loading /usr/lib/xorg/modules/libexa.so
[    34.987] (II) Module exa: vendor="X.Org Foundation"
[    34.987] 	compiled for 1.21.1.8, module version = 2.6.0
[    34.987] 	ABI class: X.Org Video Driver, version 25.2
[    34.987] (II) EXA(0): Driver allocated offscreen pixmaps
[    34.987] (II) EXA(0): Driver registered support for the following operations:
[    34.987] (II)         Solid
[    34.987] (II)         Copy
[    34.987] (II)         Composite (RENDER acceleration)
[    34.987] (II)         UploadToScreen
[    34.987] (II)         DownloadFromScreen
[    34.987] (==) NOUVEAU(0): Backing store enabled
[    34.987] (==) NOUVEAU(0): Silken mouse enabled
[    34.987] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[    34.987] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    34.987] (==) NOUVEAU(0): DPMS enabled
[    35.011] (II) Initializing extension Generic Event Extension
[    35.011] (II) Initializing extension SHAPE
[    35.012] (II) Initializing extension MIT-SHM
[    35.012] (II) Initializing extension XInputExtension
[    35.012] (II) Initializing extension XTEST
[    35.012] (II) Initializing extension BIG-REQUESTS
[    35.013] (II) Initializing extension SYNC
[    35.013] (II) Initializing extension XKEYBOARD
[    35.013] (II) Initializing extension XC-MISC
[    35.013] (II) Initializing extension SECURITY
[    35.014] (II) Initializing extension XFIXES
[    35.014] (II) Initializing extension RENDER
[    35.014] (II) Initializing extension RANDR
[    35.014] (II) Initializing extension COMPOSITE
[    35.014] (II) Initializing extension DAMAGE
[    35.015] (II) Initializing extension MIT-SCREEN-SAVER
[    35.015] (II) Initializing extension DOUBLE-BUFFER
[    35.015] (II) Initializing extension RECORD
[    35.015] (II) Initializing extension DPMS
[    35.015] (II) Initializing extension Present
[    35.015] (II) Initializing extension DRI3
[    35.015] (II) Initializing extension X-Resource
[    35.016] (II) Initializing extension XVideo
[    35.016] (II) Initializing extension XVideo-MotionCompensation
[    35.016] (II) Initializing extension GLX
[    39.947] (II) AIGLX: Loaded and initialized nouveau
[    39.947] (II) GLX: Initialized DRI2 GL provider for screen 0
[    39.947] (II) Initializing extension XFree86-VidModeExtension
[    39.948] (II) Initializing extension XFree86-DGA
[    39.948] (II) Initializing extension XFree86-DRI
[    39.948] (II) Initializing extension DRI2
[    39.951] (II) NOUVEAU(0): NVEnterVT is called.
[    39.952] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[    39.952] resize called 1024 768
[    40.587] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    40.588] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    40.588] (II) LoadModule: "libinput"
[    40.588] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    40.690] (II) Module libinput: vendor="X.Org Foundation"
[    40.690] 	compiled for 1.21.1.8, module version = 1.3.0
[    40.690] 	Module class: X.Org XInput Driver
[    40.690] 	ABI class: X.Org XInput driver, version 24.4
[    40.690] (II) Using input driver 'libinput' for 'Power Button'
[    40.690] (**) Power Button: always reports core events
[    40.690] (**) Option "Device" "/dev/input/event1"
[    40.769] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    40.769] (II) event1  - Power Button: device is a keyboard
[    40.769] (II) event1  - Power Button: device removed
[    40.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    40.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    40.795] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    40.795] (II) event1  - Power Button: device is a keyboard
[    40.796] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    40.796] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    40.796] (II) Using input driver 'libinput' for 'Power Button'
[    40.796] (**) Power Button: always reports core events
[    40.796] (**) Option "Device" "/dev/input/event0"
[    40.798] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    40.798] (II) event0  - Power Button: device is a keyboard
[    40.798] (II) event0  - Power Button: device removed
[    40.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    40.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    40.821] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    40.821] (II) event0  - Power Button: device is a keyboard
[    40.823] (II) config/udev: Adding input device A4TECH USB Device Keyboard (/dev/input/event2)
[    40.823] (**) A4TECH USB Device Keyboard: Applying InputClass "libinput keyboard catchall"
[    40.823] (II) Using input driver 'libinput' for 'A4TECH USB Device Keyboard'
[    40.824] (**) A4TECH USB Device Keyboard: always reports core events
[    40.824] (**) Option "Device" "/dev/input/event2"
[    40.826] (II) event2  - A4TECH USB Device Keyboard: is tagged by udev as: Keyboard
[    40.826] (II) event2  - A4TECH USB Device Keyboard: device is a keyboard
[    40.826] (II) event2  - A4TECH USB Device Keyboard: device removed
[    40.846] (II) libinput: A4TECH USB Device Keyboard: needs a virtual subdevice
[    40.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:09DA:054F.0001/input/input2/event2"
[    40.847] (II) XINPUT: Adding extended input device "A4TECH USB Device Keyboard" (type: MOUSE, id 8)
[    40.847] (**) Option "AccelerationScheme" "none"
[    40.847] (**) A4TECH USB Device Keyboard: (accel) selected scheme none/0
[    40.847] (**) A4TECH USB Device Keyboard: (accel) acceleration factor: 2.000
[    40.847] (**) A4TECH USB Device Keyboard: (accel) acceleration threshold: 4
[    40.849] (II) event2  - A4TECH USB Device Keyboard: is tagged by udev as: Keyboard
[    40.850] (II) event2  - A4TECH USB Device Keyboard: device is a keyboard
[    40.852] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event3)
[    40.852] (II) No input driver specified, ignoring this device.
[    40.852] (II) This device may have been added with another device file.
[    40.853] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event4)
[    40.853] (**) A4TECH USB Device: Applying InputClass "libinput pointer catchall"
[    40.853] (II) Using input driver 'libinput' for 'A4TECH USB Device'
[    40.853] (**) A4TECH USB Device: always reports core events
[    40.853] (**) Option "Device" "/dev/input/event4"
[    40.912] (II) event4  - A4TECH USB Device: is tagged by udev as: Mouse
[    40.913] (II) event4  - A4TECH USB Device: device is a pointer
[    40.913] (II) event4  - A4TECH USB Device: device removed
[    40.956] (II) libinput: A4TECH USB Device: Step value 0 was provided, libinput Fallback acceleration function is used.
[    40.956] (II) libinput: A4TECH USB Device: Step value 0 was provided, libinput Fallback acceleration function is used.
[    40.956] (II) libinput: A4TECH USB Device: Step value 0 was provided, libinput Fallback acceleration function is used.
[    40.956] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.1/0003:09DA:054F.0002/input/input4/event4"
[    40.956] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
[    40.957] (**) Option "AccelerationScheme" "none"
[    40.957] (**) A4TECH USB Device: (accel) selected scheme none/0
[    40.957] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    40.957] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    41.016] (II) event4  - A4TECH USB Device: is tagged by udev as: Mouse
[    41.016] (II) event4  - A4TECH USB Device: device is a pointer
[    41.018] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[    41.018] (II) No input driver specified, ignoring this device.
[    41.018] (II) This device may have been added with another device file.
[    41.019] (II) config/udev: Adding input device HDA VIA VT82xx Line Out CLFE (/dev/input/event10)
[    41.019] (II) No input driver specified, ignoring this device.
[    41.019] (II) This device may have been added with another device file.
[    41.020] (II) config/udev: Adding input device HDA VIA VT82xx Line Out Side (/dev/input/event11)
[    41.020] (II) No input driver specified, ignoring this device.
[    41.020] (II) This device may have been added with another device file.
[    41.021] (II) config/udev: Adding input device HDA VIA VT82xx Mic (/dev/input/event6)
[    41.021] (II) No input driver specified, ignoring this device.
[    41.021] (II) This device may have been added with another device file.
[    41.022] (II) config/udev: Adding input device HDA VIA VT82xx Line (/dev/input/event7)
[    41.022] (II) No input driver specified, ignoring this device.
[    41.022] (II) This device may have been added with another device file.
[    41.022] (II) config/udev: Adding input device HDA VIA VT82xx Line Out Front (/dev/input/event8)
[    41.022] (II) No input driver specified, ignoring this device.
[    41.022] (II) This device may have been added with another device file.
[    41.023] (II) config/udev: Adding input device HDA VIA VT82xx Line Out Surround (/dev/input/event9)
[    41.023] (II) No input driver specified, ignoring this device.
[    41.023] (II) This device may have been added with another device file.
[    41.024] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    41.024] (II) No input driver specified, ignoring this device.
[    41.024] (II) This device may have been added with another device file.
[    41.044] (**) A4TECH USB Device Keyboard: Applying InputClass "libinput keyboard catchall"
[    41.044] (II) Using input driver 'libinput' for 'A4TECH USB Device Keyboard'
[    41.044] (**) A4TECH USB Device Keyboard: always reports core events
[    41.044] (**) Option "Device" "/dev/input/event2"
[    41.044] (II) libinput: A4TECH USB Device Keyboard: is a virtual subdevice
[    41.044] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:09DA:054F.0001/input/input2/event2"
[    41.044] (II) XINPUT: Adding extended input device "A4TECH USB Device Keyboard" (type: KEYBOARD, id 10)
[   186.831] resize called 1280 1024
[   186.863] resize called 2560 1024
seth wrote:

How big is the visible corner, same size as the other monitor?

No. Very small, maybe around 20px each side.

seth wrote:

Do you see the mouse pointer across the entire monitor?

Yes.

seth wrote:

Do the outputs work normally when you then re-enable the compositor manually after the login?

No. Again the black screen appears.

Offline

#6 2023-07-25 15:31:45

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,127

Re: [Solved] Black screen after login to XFCE4

[    39.952] resize called 1024 768
…
[   186.831] resize called 1280 1024
[   186.863] resize called 2560 1024

The output is running at 1024x768, though? Are you scaling it?

What if you get rid of xf86-video-nouveau (you'll be using the modesetting driver on top of the nouveau kernel module, this is fine)
As a matter of fact, get rid of all xf86-video-* packages. You don't  want to accidentally end up running VESA or fbdev, the server failing to indicate sth's wrong is the FAR superior alternative to that.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2023-07-25 16:04:36

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:

The output is running at 1024x768, though? Are you scaling it?

Not sure. I have these code in my ~/.profile to fix resolution:

xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
xrandr --addmode VGA-1 "1280x1024_60.00"
xrandr --output VGA-1 --mode "1280x1024_60.00"
xrandr --output DVI-I-1 --mode 1280x720 --right-of VGA-1

get rid of all xf86-video-* packages

Uninstalled xf86-video-noueavu package and with compositor it works fine, but I feel a lot slower compared to the first time which I fired up xfce.

Offline

#8 2023-07-25 16:11:14

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,127

Re: [Solved] Black screen after login to XFCE4

I feel a lot slower compared to the first time which I fired up xfce.

Also w/o the compositor? Was " first time which I fired up xfce" w/ the compositor active? And with two monitors?
Do you get better performance if you arrange the outputs vertically (so stay below 2048px in each direction)?
Do you get the black-screen issue w/ that config and xf86-video-nouveau?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#9 2023-07-25 16:17:54

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:

Also w/o the compositor?

Without that xf86 package and w/o compositor everything is so smooth.

seth wrote:

Was " first time which I fired up xfce" w/ the compositor active? And with two monitors?

Yes.

seth wrote:

Do you get better performance if you arrange the outputs vertically (so stay below 2048px in each direction)?

Yes. It's just like disabling compositor.

seth wrote:

Do you get the black-screen issue w/ that config and xf86-video-nouveau?

What do you mean of "config"?
With "xf86-video-nouveau" package and compositor enabled I get that issue.

Offline

#10 2023-07-25 16:38:36

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,127

Re: [Solved] Black screen after login to XFCE4

What do you mean of "config"?

The vertical arrangement.
If the performance is vastly better as long as you stay in 2048x2048 bounds you're probably exceeding some limit and run into SW emulation.

glxinfo -l | grep -i max

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#11 2023-07-25 17:00:04

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:
glxinfo -l | grep -i max
    Max core profile version: 4.5
    Max compat profile version: 4.5
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
    GL_AMD_shader_stencil_export, GL_AMD_shader_trinary_minmax, 
    GL_ARB_texture_filter_minmax, GL_ARB_texture_float, GL_ARB_texture_gather, 
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_filter_minmax, 
    GL_IBM_multimode_draw_arrays, GL_INTEL_shader_atomic_float_minmax, 
    GL_MAX_ATTRIB_STACK_DEPTH = 16
    GL_MAX_CLIENT_ATTRIB_STACK_DEPTH = 16
    GL_MAX_CLIP_PLANES = 8
    GL_MAX_ELEMENTS_VERTICES = 3000
    GL_MAX_ELEMENTS_INDICES = 3000
    GL_MAX_EVAL_ORDER = 30
    GL_MAX_LIGHTS = 8
    GL_MAX_LIST_NESTING = 64
    GL_MAX_MODELVIEW_STACK_DEPTH = 32
    GL_MAX_NAME_STACK_DEPTH = 64
    GL_MAX_PIXEL_MAP_TABLE = 256
    GL_MAX_PROJECTION_STACK_DEPTH = 32
    GL_MAX_TEXTURE_STACK_DEPTH = 10
    GL_MAX_TEXTURE_SIZE = 16384
    GL_MAX_3D_TEXTURE_SIZE = 2048
    GL_MAX_ARRAY_TEXTURE_LAYERS = 2048
    GL_MAX_VIEWPORT_DIMS = 16384, 16384
    GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT = 16
    GL_MAX_DRAW_BUFFERS_ARB = 8
    GL_MAX_DUAL_SOURCE_DRAW_BUFFERS = 1
    GL_MAX_RENDERBUFFER_SIZE = 16384
    GL_MAX_COLOR_ATTACHMENTS = 8
    GL_MAX_SAMPLES = 4
    GL_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4
    GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS = 64
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS = 4
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS = 64
    GL_MAX_TEXTURE_BUFFER_SIZE = 134217728
    GL_MAX_COLOR_TEXTURE_SAMPLES = 4
    GL_MAX_DEPTH_TEXTURE_SAMPLES = 4
    GL_MAX_INTEGER_SAMPLES = 4
    GL_MAX_VERTEX_UNIFORM_BLOCKS = 15
    GL_MAX_FRAGMENT_UNIFORM_BLOCKS = 15
    GL_MAX_GEOMETRY_UNIFORM_BLOCKS = 15
    GL_MAX_COMBINED_UNIFORM_BLOCKS = 90
    GL_MAX_UNIFORM_BUFFER_BINDINGS = 90
    GL_MAX_UNIFORM_BLOCK_SIZE = 65536
    GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMBINED_GEOMETRY_UNIFORM_COMPONENTS = 262144
    GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET = 2047
    GL_MAX_VERTEX_ATTRIB_BINDINGS = 16
    GL_MAX_TESS_GEN_LEVEL = 64
    GL_MAX_TESS_PATCH_COMPONENTS = 128
    GL_MAX_TESS_CONTROL_UNIFORM_BLOCKS = 15
    GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS = 16384
    GL_MAX_TESS_CONTROL_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_TESS_CONTROL_INPUT_COMPONENTS = 128
    GL_MAX_TESS_CONTROL_OUTPUT_COMPONENTS = 128
    GL_MAX_TESS_CONTROL_TOTAL_OUTPUT_COMPONENTS = 4096
    GL_MAX_COMBINED_TESS_CONTROL_UNIFORM_COMPONENTS = 262144
    GL_MAX_TESS_EVALUATION_UNIFORM_BLOCKS = 15
    GL_MAX_TESS_EVALUATION_UNIFORM_COMPONENTS = 16384
    GL_MAX_TESS_EVALUATION_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_TESS_EVALUATION_INPUT_COMPONENTS = 128
    GL_MAX_TESS_EVALUATION_OUTPUT_COMPONENTS = 128
    GL_MAX_COMBINED_TESS_EVALUATION_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS = 192
    GL_MAX_DRAW_BUFFERS = 8
    GL_MAX_FRAGMENT_UNIFORM_COMPONENTS = 16384
    GL_MAX_TEXTURE_COORDS = 8
    GL_MAX_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_VARYING_FLOATS = 128
    GL_MAX_VERTEX_ATTRIBS = 16
    GL_MAX_VERTEX_UNIFORM_COMPONENTS = 16384
    GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS = 64
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS = 4
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS = 64
    GL_MAX_TEXTURE_BUFFER_SIZE = 134217728
    GL_MAX_RECTANGLE_TEXTURE_SIZE = 16384
    GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_GEOMETRY_UNIFORM_COMPONENTS = 16384
    GL_MAX_GEOMETRY_OUTPUT_VERTICES = 1024
    GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS = 1024
    GL_MAX_VERTEX_OUTPUT_COMPONENTS = 128
    GL_MAX_GEOMETRY_INPUT_COMPONENTS = 128
    GL_MAX_GEOMETRY_OUTPUT_COMPONENTS = 128
    GL_MAX_FRAGMENT_INPUT_COMPONENTS = 128
    GL_MAX_SERVER_WAIT_TIMEOUT = 2147483647
    GL_MAX_SAMPLE_MASK_WORDS = 1
    GL_MAX_COLOR_TEXTURE_SAMPLES = 4
    GL_MAX_DEPTH_TEXTURE_SAMPLES = 4
    GL_MAX_INTEGER_SAMPLES = 4
    GL_MAX_DUAL_SOURCE_DRAW_BUFFERS = 1
    GL_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4
    GL_MAX_VERTEX_UNIFORM_VECTORS = 4096
    GL_MAX_VARYING_VECTORS = 32
    GL_MAX_FRAGMENT_UNIFORM_VECTORS = 4096
    GL_MAX_VERTEX_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_TESS_CONTROL_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_TESS_EVALUATION_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_GEOMETRY_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_FRAGMENT_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_COMBINED_ATOMIC_COUNTER_BUFFERS = 80
    GL_MAX_VERTEX_ATOMIC_COUNTERS = 4096
    GL_MAX_TESS_CONTROL_ATOMIC_COUNTERS = 4096
    GL_MAX_TESS_EVALUATION_ATOMIC_COUNTERS = 4096
    GL_MAX_GEOMETRY_ATOMIC_COUNTERS = 4096
    GL_MAX_FRAGMENT_ATOMIC_COUNTERS = 4096
    GL_MAX_COMBINED_ATOMIC_COUNTERS = 4096
    GL_MAX_ATOMIC_COUNTER_BUFFER_SIZE = 16384
    GL_MAX_ATOMIC_COUNTER_BUFFER_BINDINGS = 16
    GL_MAX_IMAGE_UNITS = 192
    GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS = 280
    GL_MAX_IMAGE_SAMPLES = 4
    GL_MAX_VERTEX_IMAGE_UNIFORMS = 32
    GL_MAX_TESS_CONTROL_IMAGE_UNIFORMS = 32
    GL_MAX_TESS_EVALUATION_IMAGE_UNIFORMS = 32
    GL_MAX_GEOMETRY_IMAGE_UNIFORMS = 32
    GL_MAX_FRAGMENT_IMAGE_UNIFORMS = 32
    GL_MAX_COMBINED_IMAGE_UNIFORMS = 192
    GL_MAX_ELEMENT_INDEX = 2147483647
    GL_MAX_COMPUTE_UNIFORM_BLOCKS = 15
    GL_MAX_COMPUTE_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_COMPUTE_IMAGE_UNIFORMS = 32
    GL_MAX_COMPUTE_SHARED_MEMORY_SIZE = 32768
    GL_MAX_COMPUTE_UNIFORM_COMPONENTS = 16384
    GL_MAX_COMPUTE_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_COMPUTE_ATOMIC_COUNTERS = 4096
    GL_MAX_COMBINED_COMPUTE_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS = 1024
    GL_MAX_DEBUG_MESSAGE_LENGTH = 4096
    GL_MAX_DEBUG_LOGGED_MESSAGES = 10
    GL_MAX_DEBUG_GROUP_STACK_DEPTH = 64
    GL_MAX_LABEL_LENGTH = 256
    GL_MAX_UNIFORM_LOCATIONS = 81920
    GL_MAX_FRAMEBUFFER_WIDTH = 16384
    GL_MAX_FRAMEBUFFER_HEIGHT = 16384
    GL_MAX_FRAMEBUFFER_LAYERS = 2048
    GL_MAX_FRAMEBUFFER_SAMPLES = 4
    GL_MAX_VERTEX_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_GEOMETRY_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_TESS_CONTROL_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_TESS_EVALUATION_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_FRAGMENT_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_COMPUTE_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_COMBINED_SHADER_STORAGE_BLOCKS = 80
    GL_MAX_SHADER_STORAGE_BUFFER_BINDINGS = 80
    GL_MAX_SHADER_STORAGE_BLOCK_SIZE = 134217728
    GL_MAX_COMBINED_SHADER_OUTPUT_RESOURCES = 280
    GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET = 2047
    GL_MAX_VERTEX_ATTRIB_BINDINGS = 16
    GL_MAX_VERTEX_ATTRIB_STRIDE = 2048
    GL_MAX_CULL_DISTANCES = 8
    GL_MAX_COMBINED_CLIP_AND_CULL_DISTANCES = 8
    GL_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4
    GL_MAX_VERTEX_STREAMS = 4
    GL_AMD_shader_trinary_minmax, GL_AMD_texture_texture4, 
    GL_ARB_texture_filter_minmax, GL_ARB_texture_float, GL_ARB_texture_gather, 
    GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract, 
    GL_EXT_texture_filter_minmax, GL_EXT_texture_integer, 
    GL_INTEL_shader_atomic_float_minmax, GL_KHR_blend_equation_advanced, 
    GL_NV_light_max_exponent, GL_NV_packed_depth_stencil, 
    GL_MAX_ATTRIB_STACK_DEPTH = 16
    GL_MAX_CLIENT_ATTRIB_STACK_DEPTH = 16
    GL_MAX_CLIP_PLANES = 8
    GL_MAX_ELEMENTS_VERTICES = 3000
    GL_MAX_ELEMENTS_INDICES = 3000
    GL_MAX_EVAL_ORDER = 30
    GL_MAX_LIGHTS = 8
    GL_MAX_LIST_NESTING = 64
    GL_MAX_MODELVIEW_STACK_DEPTH = 32
    GL_MAX_NAME_STACK_DEPTH = 64
    GL_MAX_PIXEL_MAP_TABLE = 256
    GL_MAX_PROJECTION_STACK_DEPTH = 32
    GL_MAX_TEXTURE_STACK_DEPTH = 10
    GL_MAX_TEXTURE_SIZE = 16384
    GL_MAX_3D_TEXTURE_SIZE = 2048
    GL_MAX_ARRAY_TEXTURE_LAYERS = 2048
    GL_MAX_VIEWPORT_DIMS = 16384, 16384
    GL_MAX_CUBE_MAP_TEXTURE_SIZE_ARB = 16384
    GL_MAX_RECTANGLE_TEXTURE_SIZE_NV = 16384
    GL_MAX_TEXTURE_UNITS_ARB = 8
    GL_MAX_TEXTURE_LOD_BIAS_EXT = 16
    GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT = 16
    GL_MAX_DRAW_BUFFERS_ARB = 8
    GL_MAX_DUAL_SOURCE_DRAW_BUFFERS = 1
    GL_MAX_RENDERBUFFER_SIZE = 16384
    GL_MAX_COLOR_ATTACHMENTS = 8
    GL_MAX_SAMPLES = 4
    GL_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4
    GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS = 64
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS = 4
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS = 64
    GL_MAX_TEXTURE_BUFFER_SIZE = 134217728
    GL_MAX_COLOR_TEXTURE_SAMPLES = 4
    GL_MAX_DEPTH_TEXTURE_SAMPLES = 4
    GL_MAX_INTEGER_SAMPLES = 4
    GL_MAX_VERTEX_UNIFORM_BLOCKS = 15
    GL_MAX_FRAGMENT_UNIFORM_BLOCKS = 15
    GL_MAX_GEOMETRY_UNIFORM_BLOCKS = 15
    GL_MAX_COMBINED_UNIFORM_BLOCKS = 90
    GL_MAX_UNIFORM_BUFFER_BINDINGS = 90
    GL_MAX_UNIFORM_BLOCK_SIZE = 65536
    GL_MAX_COMBINED_VERTEX_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMBINED_FRAGMENT_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMBINED_GEOMETRY_UNIFORM_COMPONENTS = 262144
    GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET = 2047
    GL_MAX_VERTEX_ATTRIB_BINDINGS = 16
    GL_MAX_TESS_GEN_LEVEL = 64
    GL_MAX_TESS_PATCH_COMPONENTS = 128
    GL_MAX_TESS_CONTROL_UNIFORM_BLOCKS = 15
    GL_MAX_TESS_CONTROL_UNIFORM_COMPONENTS = 16384
    GL_MAX_TESS_CONTROL_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_TESS_CONTROL_INPUT_COMPONENTS = 128
    GL_MAX_TESS_CONTROL_OUTPUT_COMPONENTS = 128
    GL_MAX_TESS_CONTROL_TOTAL_OUTPUT_COMPONENTS = 4096
    GL_MAX_COMBINED_TESS_CONTROL_UNIFORM_COMPONENTS = 262144
    GL_MAX_TESS_EVALUATION_UNIFORM_BLOCKS = 15
    GL_MAX_TESS_EVALUATION_UNIFORM_COMPONENTS = 16384
    GL_MAX_TESS_EVALUATION_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_TESS_EVALUATION_INPUT_COMPONENTS = 128
    GL_MAX_TESS_EVALUATION_OUTPUT_COMPONENTS = 128
    GL_MAX_COMBINED_TESS_EVALUATION_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS = 192
    GL_MAX_DRAW_BUFFERS = 8
    GL_MAX_FRAGMENT_UNIFORM_COMPONENTS = 16384
    GL_MAX_TEXTURE_COORDS = 8
    GL_MAX_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_VARYING_FLOATS = 128
    GL_MAX_VERTEX_ATTRIBS = 16
    GL_MAX_VERTEX_UNIFORM_COMPONENTS = 16384
    GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_TRANSFORM_FEEDBACK_INTERLEAVED_COMPONENTS = 64
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS = 4
    GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_COMPONENTS = 64
    GL_MAX_TEXTURE_BUFFER_SIZE = 134217728
    GL_MAX_RECTANGLE_TEXTURE_SIZE = 16384
    GL_MAX_GEOMETRY_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_GEOMETRY_UNIFORM_COMPONENTS = 16384
    GL_MAX_GEOMETRY_OUTPUT_VERTICES = 1024
    GL_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS = 1024
    GL_MAX_VERTEX_OUTPUT_COMPONENTS = 128
    GL_MAX_GEOMETRY_INPUT_COMPONENTS = 128
    GL_MAX_GEOMETRY_OUTPUT_COMPONENTS = 128
    GL_MAX_FRAGMENT_INPUT_COMPONENTS = 128
    GL_MAX_SERVER_WAIT_TIMEOUT = 2147483647
    GL_MAX_SAMPLE_MASK_WORDS = 1
    GL_MAX_COLOR_TEXTURE_SAMPLES = 4
    GL_MAX_DEPTH_TEXTURE_SAMPLES = 4
    GL_MAX_INTEGER_SAMPLES = 4
    GL_MAX_DUAL_SOURCE_DRAW_BUFFERS = 1
    GL_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4
    GL_MAX_VERTEX_UNIFORM_VECTORS = 4096
    GL_MAX_VARYING_VECTORS = 32
    GL_MAX_FRAGMENT_UNIFORM_VECTORS = 4096
    GL_MAX_VERTEX_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_TESS_CONTROL_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_TESS_EVALUATION_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_GEOMETRY_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_FRAGMENT_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_COMBINED_ATOMIC_COUNTER_BUFFERS = 80
    GL_MAX_VERTEX_ATOMIC_COUNTERS = 4096
    GL_MAX_TESS_CONTROL_ATOMIC_COUNTERS = 4096
    GL_MAX_TESS_EVALUATION_ATOMIC_COUNTERS = 4096
    GL_MAX_GEOMETRY_ATOMIC_COUNTERS = 4096
    GL_MAX_FRAGMENT_ATOMIC_COUNTERS = 4096
    GL_MAX_COMBINED_ATOMIC_COUNTERS = 4096
    GL_MAX_ATOMIC_COUNTER_BUFFER_SIZE = 16384
    GL_MAX_ATOMIC_COUNTER_BUFFER_BINDINGS = 16
    GL_MAX_IMAGE_UNITS = 192
    GL_MAX_COMBINED_IMAGE_UNITS_AND_FRAGMENT_OUTPUTS = 280
    GL_MAX_IMAGE_SAMPLES = 4
    GL_MAX_VERTEX_IMAGE_UNIFORMS = 32
    GL_MAX_TESS_CONTROL_IMAGE_UNIFORMS = 32
    GL_MAX_TESS_EVALUATION_IMAGE_UNIFORMS = 32
    GL_MAX_GEOMETRY_IMAGE_UNIFORMS = 32
    GL_MAX_FRAGMENT_IMAGE_UNIFORMS = 32
    GL_MAX_COMBINED_IMAGE_UNIFORMS = 192
    GL_MAX_ELEMENT_INDEX = 2147483647
    GL_MAX_COMPUTE_UNIFORM_BLOCKS = 15
    GL_MAX_COMPUTE_TEXTURE_IMAGE_UNITS = 32
    GL_MAX_COMPUTE_IMAGE_UNIFORMS = 32
    GL_MAX_COMPUTE_SHARED_MEMORY_SIZE = 32768
    GL_MAX_COMPUTE_UNIFORM_COMPONENTS = 16384
    GL_MAX_COMPUTE_ATOMIC_COUNTER_BUFFERS = 16
    GL_MAX_COMPUTE_ATOMIC_COUNTERS = 4096
    GL_MAX_COMBINED_COMPUTE_UNIFORM_COMPONENTS = 262144
    GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS = 1024
    GL_MAX_DEBUG_MESSAGE_LENGTH = 4096
    GL_MAX_DEBUG_LOGGED_MESSAGES = 10
    GL_MAX_DEBUG_GROUP_STACK_DEPTH = 64
    GL_MAX_LABEL_LENGTH = 256
    GL_MAX_UNIFORM_LOCATIONS = 81920
    GL_MAX_FRAMEBUFFER_WIDTH = 16384
    GL_MAX_FRAMEBUFFER_HEIGHT = 16384
    GL_MAX_FRAMEBUFFER_LAYERS = 2048
    GL_MAX_FRAMEBUFFER_SAMPLES = 4
    GL_MAX_VERTEX_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_GEOMETRY_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_TESS_CONTROL_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_TESS_EVALUATION_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_FRAGMENT_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_COMPUTE_SHADER_STORAGE_BLOCKS = 16
    GL_MAX_COMBINED_SHADER_STORAGE_BLOCKS = 80
    GL_MAX_SHADER_STORAGE_BUFFER_BINDINGS = 80
    GL_MAX_SHADER_STORAGE_BLOCK_SIZE = 134217728
    GL_MAX_COMBINED_SHADER_OUTPUT_RESOURCES = 280
    GL_MAX_VERTEX_ATTRIB_RELATIVE_OFFSET = 2047
    GL_MAX_VERTEX_ATTRIB_BINDINGS = 16
    GL_MAX_VERTEX_ATTRIB_STRIDE = 2048
    GL_MAX_CULL_DISTANCES = 8
    GL_MAX_COMBINED_CLIP_AND_CULL_DISTANCES = 8
    GL_MAX_TRANSFORM_FEEDBACK_BUFFERS = 4
    GL_MAX_VERTEX_STREAMS = 4
    GL_MAX_PROGRAM_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_TEMPORARIES_ARB = 4096
    GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB = 4096
    GL_MAX_PROGRAM_PARAMETERS_ARB = 2048
    GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB = 2048
    GL_MAX_PROGRAM_ATTRIBS_ARB = 16
    GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB = 32
    GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB = 1
    GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB = 1
    GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB = 2048
    GL_MAX_PROGRAM_ENV_PARAMETERS_ARB = 256
    GL_MAX_PROGRAM_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_TEMPORARIES_ARB = 4096
    GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB = 4096
    GL_MAX_PROGRAM_PARAMETERS_ARB = 2048
    GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB = 2048
    GL_MAX_PROGRAM_ATTRIBS_ARB = 32
    GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB = 32
    GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB = 0
    GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB = 0
    GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB = 2048
    GL_MAX_PROGRAM_ENV_PARAMETERS_ARB = 256
    GL_MAX_PROGRAM_ALU_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_TEX_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_TEX_INDIRECTIONS_ARB = 1048576
    GL_MAX_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB = 1048576
    GL_MAX_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB = 1048576
    GL_APPLE_texture_max_level, GL_ARM_shader_framebuffer_fetch_depth_stencil, 
    GL_EXT_blend_func_extended, GL_EXT_blend_minmax, GL_EXT_buffer_storage, 
    GL_EXT_texture_filter_minmax, GL_EXT_texture_format_BGRA8888,

It looks so.

Offline

#12 2023-07-25 18:06:37

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:

The vertical arrangement.

Tried with that xf86 package installed and vertical arrangement configured (using --below instead of --right-of) and the black screen issue came back.

Offline

#13 2023-07-25 19:53:12

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,127

Re: [Solved] Black screen after login to XFCE4

The limits actually don't yell a 2k limit, but this could be just "software included to make every GL client happy"
Do you get the black screen w/ picom instead of the xfwm4 compositor?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#14 2023-07-25 20:25:26

amiria703
Member
Registered: 2023-07-18
Posts: 21

Re: [Solved] Black screen after login to XFCE4

seth wrote:

Do you get the black screen w/ picom instead of the xfwm4 compositor?

Thanks for your help. I'm happy with my current configuration. Everything is going to run fine? As I want to use xfwm4 and everything now looks good.

Offline

Pages: 1

Board footer

Powered by FluxBB