You are not logged in.
Pages: 1
I got a new laptop (Intel Core i7-12700H, NVIDIA GeForce RTX 3050) to replace my old laptop (Intel Core i7-6700HQ, NVIDIA GeForce GTX 980M). It's got a 1920x1080 144Hz display, the old one has a 1920x1080 60Hz display.
On the old laptop I was using a 5.15 kernel due to intermittent issues with the system freezing when trying to suspend on kernel 6.1 or newer. On the new laptop, KDE Night Colour or Redshift refused to work on this kernel (and gamma changes were also ignored). After some searching I found a suggestion to try a newer kernel, and found out that Night Colour works on both kernel 6.1 LTS and kernel 6.4 Zen.
All seemed fine until I tried running an old game in Wine that switches the resolution to 640x480 full screen. The screen would just go black after the game changes the resolution, forcing me to switch to another TTY and reboot. On kernel 5.15 it works fine, but without Night Colour or Redshift the screen is uncomfortable to look at, bad for my eyes.
I tried downgrading to kernel 6.0.12, but it made no difference. I even tried downgrading to 5.19 and 5.18 but still no luck (and on those kernels, it also failed to load the nvidia and tuxedo-keyboard modules even though there were no error messages when installing them with DKMS. Compiling 5.18.19 from source yielded the same result as well (dkms modules installing fine but not loading, black screen when changing resolution).
I did briefly boot up my old laptop again and tried the old game with kernel 6.1, and it worked without any issues.
The same happens if I try switching the resolution in the KDE system settings. I went through the list of resolutions, and 1680x1050@60Hz and 1600x900@60Hz both worked fine (only 60Hz available for these resolutions). I then tried 1400x1050@75Hz, and the screen went black and I again had to log in to a different TTY to reboot. Trying to switch to 640x480@85Hz also produces the same result. On kernel 5.15 it works fine.
I tried with a live Kubuntu 23.04 ISO (which has kernel 6.2.0), and there switching to 1400x1050 or 640x480 worked fine as well even though it has a kernel version that would have failed on my current Arch install on this laptop.
I finally tried 1400x1050@60Hz, and found out that it worked. The same with 640x480@60Hz.
I've also tried switching Optimus from NVIDIA only mode to hybrid mode (commented out the line "Option "PrimaryGPU" "yes"" in /usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf), but the screen still went black when trying to run that old game. The only difference is that instead of the screen going black when trying to switch to one of the buggy display modes in system settings, nothing would happen and KDE would just ignore the change.
As a last resort I attempted to force xrandr to only make 60Hz available in 640x480 by doing the following:
cvt 640 480 60
xrandr --newmode "640x480_60.00" 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (based on the output of the cvt command)
xrandr --addmode eDP-1-1 640x480_60.00
The only thing that accomplished was to add an additional 59Hz frequency to the existing list of frequencies (85, 75, 73 and 60) in system settings for 640x480. Trying xrandr --delmode eDP-1-1 640x480 didn't work, it wouldn't let me even when running it with root privileges.
Basically I need to achieve one of the following (in order of preference):
Make all supported display modes work without issues, just like they do on kernel 5.15.
Force only 60Hz to be available for the resolutions that are faulty on the newer kernel (or at least for 640x480 to make that old game work).
Make Night Colour or Redshift work on kernel 5.15
Last edited by RogerS_01 (2023-07-28 03:21:42)
Offline
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Offline
[ 27.098] (--) Log file renamed from "/var/log/Xorg.pid-1179.log" to "/var/log/Xorg.0.log"
[ 27.100]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 27.100] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 27.100] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=<redacted> rw nvidia_drm.modeset=1 zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=<redacted>:archlinux quiet loglevel=3 audit=0
[ 27.100]
[ 27.100] Current version of pixman: 0.42.2
[ 27.100] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.100] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.100] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 26 16:43:03 2023
[ 27.101] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.101] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.102] (==) No Layout section. Using the first Screen section.
[ 27.102] (==) No screen section available. Using defaults.
[ 27.102] (**) |-->Screen "Default Screen Section" (0)
[ 27.102] (**) | |-->Monitor "<default monitor>"
[ 27.102] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.102] (**) Option "IgnoreABI" "1"
[ 27.102] (**) Ignoring ABI Version
[ 27.102] (==) Automatically adding devices
[ 27.102] (==) Automatically enabling devices
[ 27.102] (==) Automatically adding GPU devices
[ 27.102] (==) Automatically binding GPU devices
[ 27.102] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 27.102] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 27.102] Entry deleted from font path.
[ 27.103] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 27.103] Entry deleted from font path.
[ 27.103] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 27.103] Entry deleted from font path.
[ 27.105] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 27.105] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.105] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.105] (II) Module ABI versions:
[ 27.105] X.Org ANSI C Emulation: 0.4
[ 27.105] X.Org Video Driver: 25.2
[ 27.105] X.Org XInput driver : 24.4
[ 27.105] X.Org Server Extension : 10.0
[ 27.106] (++) using VT number 2
[ 27.106] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 27.106] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.106] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 27.107] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 27.107] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 27.108] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 27.108] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 27.109] (--) PCI: (0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 27.109] (--) PCI:*(1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 27.109] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.109] (II) LoadModule: "glx"
[ 27.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.119] (II) Module glx: vendor="X.Org Foundation"
[ 27.119] compiled for 1.21.1.8, module version = 1.0.0
[ 27.119] ABI class: X.Org Server Extension, version 10.0
[ 27.119] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 27.119] loading driver: nvidia
[ 27.119] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 27.119] loading driver: modesetting
[ 27.119] (==) Matched nvidia as autoconfigured driver 0
[ 27.119] (==) Matched nouveau as autoconfigured driver 1
[ 27.119] (==) Matched nv as autoconfigured driver 2
[ 27.119] (==) Matched modesetting as autoconfigured driver 3
[ 27.119] (==) Matched intel as autoconfigured driver 4
[ 27.119] (==) Matched fbdev as autoconfigured driver 5
[ 27.120] (==) Matched vesa as autoconfigured driver 6
[ 27.120] (==) Assigned the driver to the xf86ConfigLayout
[ 27.120] (II) LoadModule: "nvidia"
[ 27.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.125] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.125] compiled for 1.6.99.901, module version = 1.0.0
[ 27.125] Module class: X.Org Video Driver
[ 27.125] (II) LoadModule: "nouveau"
[ 27.126] (WW) Warning, couldn't open module nouveau
[ 27.126] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 27.126] (II) LoadModule: "nv"
[ 27.126] (WW) Warning, couldn't open module nv
[ 27.126] (EE) Failed to load module "nv" (module does not exist, 0)
[ 27.126] (II) LoadModule: "modesetting"
[ 27.126] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 27.130] (II) Module modesetting: vendor="X.Org Foundation"
[ 27.130] compiled for 1.21.1.8, module version = 1.21.1
[ 27.130] Module class: X.Org Video Driver
[ 27.130] ABI class: X.Org Video Driver, version 25.2
[ 27.130] (II) LoadModule: "intel"
[ 27.130] (WW) Warning, couldn't open module intel
[ 27.130] (EE) Failed to load module "intel" (module does not exist, 0)
[ 27.130] (II) LoadModule: "fbdev"
[ 27.130] (WW) Warning, couldn't open module fbdev
[ 27.130] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 27.130] (II) LoadModule: "vesa"
[ 27.130] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27.131] (II) Module vesa: vendor="X.Org Foundation"
[ 27.131] compiled for 1.21.1.4, module version = 2.6.0
[ 27.131] Module class: X.Org Video Driver
[ 27.131] ABI class: X.Org Video Driver, version 25.2
[ 27.131] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 27.131] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.131] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 27.131] (II) VESA: driver for VESA chipsets: vesa
[ 27.137] (II) Loading sub module "fb"
[ 27.137] (II) LoadModule: "fb"
[ 27.137] (II) Module "fb" already built-in
[ 27.137] (II) Loading sub module "wfb"
[ 27.137] (II) LoadModule: "wfb"
[ 27.137] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.138] (II) Module wfb: vendor="X.Org Foundation"
[ 27.138] compiled for 1.21.1.8, module version = 1.0.0
[ 27.138] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.139] (WW) Falling back to old probe method for modesetting
[ 27.142] (II) modeset(G0): using drv /dev/dri/card1
[ 27.142] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.142] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 27.142] (==) NVIDIA(0): RGB weight 888
[ 27.142] (==) NVIDIA(0): Default visual is TrueColor
[ 27.142] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.142] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 27.142] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 27.142] (**) NVIDIA(0): Enabling 2D acceleration
[ 27.142] (II) Loading sub module "glxserver_nvidia"
[ 27.142] (II) LoadModule: "glxserver_nvidia"
[ 27.142] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 27.186] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 27.186] compiled for 1.6.99.901, module version = 1.0.0
[ 27.186] Module class: X.Org Server Extension
[ 27.186] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 27.187] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 27.191] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3050 Laptop GPU (GA107-A) at
[ 27.191] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 27.191] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 27.191] (--) NVIDIA(0): VideoBIOS: 94.07.66.00.5d
[ 27.191] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 27.191] (II) NVIDIA(0): Validated MetaModes:
[ 27.191] (II) NVIDIA(0): "NULL"
[ 27.191] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 27.191] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 27.191] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 27.191] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 27.191] (==) modeset(G0): RGB weight 888
[ 27.191] (==) modeset(G0): Default visual is TrueColor
[ 27.191] (II) Loading sub module "glamoregl"
[ 27.191] (II) LoadModule: "glamoregl"
[ 27.191] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 27.196] (II) Module glamoregl: vendor="X.Org Foundation"
[ 27.196] compiled for 1.21.1.8, module version = 1.0.1
[ 27.196] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.653] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 27.653] (II) modeset(G0): glamor initialized
[ 27.655] (II) modeset(G0): Output eDP-1-1 has no monitor section
[ 27.655] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 27.656] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 27.656] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 27.658] (II) modeset(G0): EDID for output eDP-1-1
[ 27.658] (II) modeset(G0): Manufacturer: BOE Model: 823 Serial#: 0
[ 27.658] (II) modeset(G0): Year: 2018 Week: 1
[ 27.658] (II) modeset(G0): EDID Version: 1.4
[ 27.658] (II) modeset(G0): Digital Display Input
[ 27.658] (II) modeset(G0): 8 bits per channel
[ 27.658] (II) modeset(G0): Digital interface is DisplayPort
[ 27.658] (II) modeset(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 27.658] (II) modeset(G0): Gamma: 2.20
[ 27.658] (II) modeset(G0): No DPMS capabilities specified
[ 27.658] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 27.658] (II) modeset(G0): First detailed timing is preferred mode
[ 27.658] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 27.658] (II) modeset(G0): Display is continuous-frequency
[ 27.658] (II) modeset(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 27.658] (II) modeset(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 27.658] (II) modeset(G0): Manufacturer's mask: 0
[ 27.658] (II) modeset(G0): Supported detailed timing:
[ 27.658] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 27.658] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 27.658] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 27.658] (II) modeset(G0): Supported detailed timing:
[ 27.658] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 27.658] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 27.658] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 27.658] (II) modeset(G0): Unknown vendor-specific block 2
[ 27.658] (II) modeset(G0): EDID (in hex):
[ 27.658] (II) modeset(G0): 00ffffffffffff0009e5230800000000
[ 27.658] (II) modeset(G0): 011c0104a526157803de50a3544c9926
[ 27.658] (II) modeset(G0): 0f505400000001010101010101010101
[ 27.658] (II) modeset(G0): 010101010101188d801871383c406c30
[ 27.658] (II) modeset(G0): aa007ed71000001a188d801871387846
[ 27.658] (II) modeset(G0): 6c30aa007ed71000001a000000000000
[ 27.658] (II) modeset(G0): 00000000000000000000000000000002
[ 27.658] (II) modeset(G0): 000932ff0a3c962f1b439600000000b2
[ 27.659] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 27.659] (II) modeset(G0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 27.659] (II) modeset(G0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 27.659] (II) modeset(G0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 27.659] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 27.659] (II) modeset(G0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 27.659] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 27.659] (II) modeset(G0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 27.659] (II) modeset(G0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): EDID for output HDMI-1-1
[ 27.659] (II) modeset(G0): EDID for output DP-1-1
[ 27.659] (II) modeset(G0): EDID for output HDMI-1-2
[ 27.659] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.659] (==) modeset(G0): DPI set to (96, 96)
[ 27.659] (II) Loading sub module "fb"
[ 27.659] (II) LoadModule: "fb"
[ 27.659] (II) Module "fb" already built-in
[ 27.659] (II) UnloadModule: "vesa"
[ 27.659] (II) Unloading vesa
[ 27.659] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 27.659] (II) NVIDIA: access.
[ 27.665] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 27.665] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 27.665] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 27.665] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 27.665] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 27.665] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 27.665] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 27.665] (II) NVIDIA(0): Config Options in the README.
[ 27.676] (II) NVIDIA(0): Setting mode "NULL"
[ 27.680] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 27.680] (==) NVIDIA(0): Backing store enabled
[ 27.680] (==) NVIDIA(0): Silken mouse enabled
[ 27.680] (==) NVIDIA(0): DPMS enabled
[ 27.680] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 27.680] (II) Loading sub module "dri2"
[ 27.680] (II) LoadModule: "dri2"
[ 27.680] (II) Module "dri2" already built-in
[ 27.680] (II) NVIDIA(0): [DRI2] Setup complete
[ 27.680] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 27.694] (==) modeset(G0): Backing store enabled
[ 27.694] (==) modeset(G0): Silken mouse enabled
[ 27.725] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 27.725] (==) modeset(G0): DPMS enabled
[ 27.725] (II) modeset(G0): [DRI2] Setup complete
[ 27.725] (II) modeset(G0): [DRI2] DRI driver: iris
[ 27.725] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 27.725] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 27.725] (II) Initializing extension Generic Event Extension
[ 27.726] (II) Initializing extension SHAPE
[ 27.726] (II) Initializing extension MIT-SHM
[ 27.726] (II) Initializing extension XInputExtension
[ 27.726] (II) Initializing extension XTEST
[ 27.726] (II) Initializing extension BIG-REQUESTS
[ 27.726] (II) Initializing extension SYNC
[ 27.726] (II) Initializing extension XKEYBOARD
[ 27.726] (II) Initializing extension XC-MISC
[ 27.726] (II) Initializing extension SECURITY
[ 27.726] (II) Initializing extension XFIXES
[ 27.726] (II) Initializing extension RENDER
[ 27.726] (II) Initializing extension RANDR
[ 27.726] (II) Initializing extension COMPOSITE
[ 27.727] (II) Initializing extension DAMAGE
[ 27.727] (II) Initializing extension MIT-SCREEN-SAVER
[ 27.727] (II) Initializing extension DOUBLE-BUFFER
[ 27.727] (II) Initializing extension RECORD
[ 27.727] (II) Initializing extension DPMS
[ 27.727] (II) Initializing extension Present
[ 27.727] (II) Initializing extension DRI3
[ 27.727] (II) Initializing extension X-Resource
[ 27.727] (II) Initializing extension XVideo
[ 27.727] (II) Initializing extension XVideo-MotionCompensation
[ 27.727] (II) Initializing extension GLX
[ 27.727] (II) Initializing extension GLX
[ 27.727] (II) Indirect GLX disabled.
[ 27.728] (II) GLX: Another vendor is already registered for screen 0
[ 27.728] (II) Initializing extension XFree86-VidModeExtension
[ 27.728] (II) Initializing extension XFree86-DGA
[ 27.728] (II) Initializing extension XFree86-DRI
[ 27.728] (II) Initializing extension DRI2
[ 27.728] (II) Initializing extension NV-GLX
[ 27.728] (II) Initializing extension NV-CONTROL
[ 28.513] (II) modeset(G0): Damage tracking initialized
[ 28.587] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 28.587] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 28.587] (**) Power Button: Applying InputClass "system-keyboard"
[ 28.587] (II) LoadModule: "libinput"
[ 28.588] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 28.590] (II) Module libinput: vendor="X.Org Foundation"
[ 28.590] compiled for 1.21.1.8, module version = 1.3.0
[ 28.590] Module class: X.Org XInput Driver
[ 28.590] ABI class: X.Org XInput driver, version 24.4
[ 28.590] (II) Using input driver 'libinput' for 'Power Button'
[ 28.590] (**) Power Button: always reports core events
[ 28.590] (**) Option "Device" "/dev/input/event3"
[ 28.592] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 28.592] (II) event3 - Power Button: device is a keyboard
[ 28.592] (II) event3 - Power Button: device removed
[ 28.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 28.620] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.620] (**) Option "xkb_layout" "us"
[ 28.620] (**) Option "xkb_variant" "altgr-intl"
[ 28.640] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 28.640] (II) event3 - Power Button: device is a keyboard
[ 28.640] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 28.640] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 28.640] (**) Video Bus: Applying InputClass "system-keyboard"
[ 28.640] (II) Using input driver 'libinput' for 'Video Bus'
[ 28.640] (**) Video Bus: always reports core events
[ 28.640] (**) Option "Device" "/dev/input/event13"
[ 28.641] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 28.641] (II) event13 - Video Bus: device is a keyboard
[ 28.641] (II) event13 - Video Bus: device removed
[ 28.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input223/event13"
[ 28.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 28.686] (**) Option "xkb_layout" "us"
[ 28.686] (**) Option "xkb_variant" "altgr-intl"
[ 28.688] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 28.688] (II) event13 - Video Bus: device is a keyboard
[ 28.689] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 28.689] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 28.689] (**) Power Button: Applying InputClass "system-keyboard"
[ 28.689] (II) Using input driver 'libinput' for 'Power Button'
[ 28.689] (**) Power Button: always reports core events
[ 28.689] (**) Option "Device" "/dev/input/event0"
[ 28.690] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 28.690] (II) event0 - Power Button: device is a keyboard
[ 28.691] (II) event0 - Power Button: device removed
[ 28.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 28.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 28.713] (**) Option "xkb_layout" "us"
[ 28.713] (**) Option "xkb_variant" "altgr-intl"
[ 28.715] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 28.715] (II) event0 - Power Button: device is a keyboard
[ 28.716] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 28.716] (II) No input driver specified, ignoring this device.
[ 28.716] (II) This device may have been added with another device file.
[ 28.716] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 28.716] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 28.716] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 28.716] (II) Using input driver 'libinput' for 'Sleep Button'
[ 28.716] (**) Sleep Button: always reports core events
[ 28.716] (**) Option "Device" "/dev/input/event1"
[ 28.717] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 28.717] (II) event1 - Sleep Button: device is a keyboard
[ 28.718] (II) event1 - Sleep Button: device removed
[ 28.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 28.740] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 28.740] (**) Option "xkb_layout" "us"
[ 28.740] (**) Option "xkb_variant" "altgr-intl"
[ 28.741] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 28.741] (II) event1 - Sleep Button: device is a keyboard
[ 28.743] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event9)
[ 28.743] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 28.743] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 28.743] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 28.743] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 28.743] (**) Option "Device" "/dev/input/event9"
[ 28.745] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 28.745] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 28.745] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 28.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input219/event9"
[ 28.783] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 28.783] (**) Option "xkb_layout" "us"
[ 28.783] (**) Option "xkb_variant" "altgr-intl"
[ 28.785] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 28.785] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 28.786] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 28.786] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 28.786] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 28.786] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 28.786] (**) Option "Device" "/dev/input/event5"
[ 28.845] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 28.845] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 28.846] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 28.876] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 28.876] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 28.876] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 28.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 28.876] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 28.877] (**) Option "AccelerationScheme" "none"
[ 28.877] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 28.877] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 28.877] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 28.936] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 28.936] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 28.937] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 28.937] (II) No input driver specified, ignoring this device.
[ 28.937] (II) This device may have been added with another device file.
[ 28.938] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event10)
[ 28.938] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 28.938] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 28.938] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 28.938] (**) Option "Device" "/dev/input/event10"
[ 28.939] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 28.939] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 28.939] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 28.980] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 28.980] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 28.980] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 28.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input220/event10"
[ 28.980] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 28.980] (**) Option "AccelerationScheme" "none"
[ 28.980] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 28.980] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 28.980] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 28.982] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 28.982] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 28.984] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 28.984] (II) No input driver specified, ignoring this device.
[ 28.984] (II) This device may have been added with another device file.
[ 28.985] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event11)
[ 28.985] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 28.985] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 28.985] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 28.985] (**) Option "Device" "/dev/input/event11"
[ 28.986] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 28.988] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 28.988] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 29.036] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 29.036] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 29.036] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 29.037] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input221/event11"
[ 29.037] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 29.040] (**) Option "AccelerationScheme" "none"
[ 29.040] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 29.040] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 29.040] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 29.041] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 29.044] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 29.045] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 29.045] (II) No input driver specified, ignoring this device.
[ 29.045] (II) This device may have been added with another device file.
[ 29.045] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 29.045] (II) No input driver specified, ignoring this device.
[ 29.045] (II) This device may have been added with another device file.
[ 29.045] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 29.045] (II) No input driver specified, ignoring this device.
[ 29.045] (II) This device may have been added with another device file.
[ 29.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 29.046] (II) No input driver specified, ignoring this device.
[ 29.046] (II) This device may have been added with another device file.
[ 29.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 29.046] (II) No input driver specified, ignoring this device.
[ 29.046] (II) This device may have been added with another device file.
[ 29.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 29.046] (II) No input driver specified, ignoring this device.
[ 29.046] (II) This device may have been added with another device file.
[ 29.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 29.046] (II) No input driver specified, ignoring this device.
[ 29.046] (II) This device may have been added with another device file.
[ 29.047] (II) config/udev: Adding input device Intel HID events (/dev/input/event6)
[ 29.047] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 29.047] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 29.047] (II) Using input driver 'libinput' for 'Intel HID events'
[ 29.047] (**) Intel HID events: always reports core events
[ 29.047] (**) Option "Device" "/dev/input/event6"
[ 29.047] (II) event6 - Intel HID events: is tagged by udev as: Keyboard
[ 29.047] (II) event6 - Intel HID events: device is a keyboard
[ 29.048] (II) event6 - Intel HID events: device removed
[ 29.093] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input212/event6"
[ 29.093] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 29.093] (**) Option "xkb_layout" "us"
[ 29.093] (**) Option "xkb_variant" "altgr-intl"
[ 29.093] (II) event6 - Intel HID events: is tagged by udev as: Keyboard
[ 29.093] (II) event6 - Intel HID events: device is a keyboard
[ 29.094] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 29.094] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 29.094] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 29.094] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 29.094] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.094] (**) Option "Device" "/dev/input/event4"
[ 29.094] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 29.094] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 29.095] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 29.123] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 29.123] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 29.123] (**) Option "xkb_layout" "us"
[ 29.123] (**) Option "xkb_variant" "altgr-intl"
[ 29.125] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 29.125] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 29.128] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 29.128] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 29.128] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 29.128] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 29.128] (**) Option "Device" "/dev/input/event12"
[ 29.129] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 29.129] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 29.129] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 29.166] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 29.166] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 29.166] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 29.166] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input215/event12"
[ 29.166] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 29.167] (**) Option "AccelerationScheme" "none"
[ 29.167] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 29.167] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 29.167] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 29.168] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 29.168] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 29.169] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 29.169] (II) No input driver specified, ignoring this device.
[ 29.169] (II) This device may have been added with another device file.
[ 29.170] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 29.170] (II) No input driver specified, ignoring this device.
[ 29.170] (II) This device may have been added with another device file.
[ 29.173] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event7)
[ 29.173] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 29.173] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 29.173] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 29.173] (**) TUXEDO Keyboard: always reports core events
[ 29.173] (**) Option "Device" "/dev/input/event7"
[ 29.173] (II) event7 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 29.173] (II) event7 - TUXEDO Keyboard: device is a keyboard
[ 29.174] (II) event7 - TUXEDO Keyboard: device removed
[ 29.236] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input213/event7"
[ 29.236] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 29.236] (**) Option "xkb_layout" "us"
[ 29.236] (**) Option "xkb_variant" "altgr-intl"
[ 29.238] (II) event7 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 29.238] (II) event7 - TUXEDO Keyboard: device is a keyboard
[ 39.634] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
Offline
You're running on the nvidia chip (deliberately?) and the eDP is wired to the intel chip and available through reverse prime only.
There seem no outputs attached the nvidia chip at all, so it's probably a pure 3D accelerator (check "lspci")
The eDP only advertises
Established Timings I & II: none
Standard Timings: none
Detailed Timing Descriptors:
DTD 1: 1920x1080 144.019139 Hz 16:9 164.182 kHz 361.200000 MHz (382 mm x 215 mm)
Hfront 108 Hsync 48 Hback 124 Hpol P
Vfront 10 Vsync 10 Vback 40 Vpol N
DTD 2: 1920x1080 60.007974 Hz 16:9 164.182 kHz 361.200000 MHz (382 mm x 215 mm)
Hfront 108 Hsync 48 Hback 124 Hpol P
Vfront 10 Vsync 10 Vback 1636 Vpol N
The server then adds
[ 27.659] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 27.659] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
See whether you can prevent that w/ /etc/X11/xorg.conf.d/11-monitor.conf
Section "Monitor"
Identifier "eDP-1-1" # nb. that the name will change if you run on the intel chip, you have to match the name from xrandr
Option "DefaultModes" "False"
EndSection
If so, you can then add desireable modes manually.
If not, please check the behavior when running on the intel chip (and post an xorg log for that)
Sidebar:
root=UUID=<redacted>
The UUID is meaningless and only exists for collision prevention.
Offline
You're running on the nvidia chip (deliberately?) and the eDP is wired to the intel chip and available through reverse prime only.
There seem no outputs attached the nvidia chip at all, so it's probably a pure 3D accelerator (check "lspci")
I am deliberately running on the NVIDIA chip, just like on the old laptop. I started doing that on the old laptop partly due to some weird intermittent flickering issues on parts of the screen when running the desktop on the Intel iGPU (which I later managed to fix with the kernel param intel_idle.max_cstate=2 ), partly to be able to disable vsync in NVIDIA settings, and also to to be able to squeeze some more CPU performance in the same thermal envelope by not having the iGPU add heat to the CPU die (I'm using Tuxedo Control Center to quiet the fans, combined intel-undervolt to lower the thermal limit (and on the old laptop also to undervolt, which is sadly not available any more on the 12700H CPU)).
In the NVIDIA X Server Settings on the new laptop I don't see an option in the OpenGL section anymore to disable vsync though, even when using NVIDIA as the primary GPU.
I suspect that it could possibly be a pure 3D accelerator as you mention. I know the old laptop with GTX 980M had a MUX switch, and there was even a setting in the BIOS to make it only use the dedicated GPU (which I did try once but didn't really notice much difference). Here's the output of VGA controllers with lspci -vnn:
00:02.0 VGA compatible controller [0300]: Intel Corporation Alder Lake-P Integrated Graphics Controller [8086:46a6] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Integrated Graphics Controller [1558:866d]
Flags: bus master, fast devsel, latency 0, IRQ 170, IOMMU group 0
Memory at 6102000000 (64-bit, non-prefetchable) [size=16M]
Memory at 4000000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [100] Process Address Space ID (PASID)
Capabilities: [200] Address Translation Service (ATS)
Capabilities: [300] Page Request Interface (PRI)
Capabilities: [320] Single Root I/O Virtualization (SR-IOV)
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA107M [GeForce RTX 3050 Mobile] [10de:25a2] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer GA107M [GeForce RTX 3050 Mobile] [1558:867d]
Flags: bus master, fast devsel, latency 0, IRQ 169, IOMMU group 15
Memory at 75000000 (32-bit, non-prefetchable) [size=16M]
Memory at 6000000000 (64-bit, prefetchable) [size=4G]
Memory at 6100000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Legacy Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [250] Latency Tolerance Reporting
Capabilities: [258] L1 PM Substates
Capabilities: [128] Power Budgeting <?>
Capabilities: [420] Advanced Error Reporting
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] Secondary PCI Express
Capabilities: [bb0] Physical Resizable BAR
Capabilities: [c1c] Physical Layer 16.0 GT/s <?>
Capabilities: [d00] Lane Margining at the Receiver <?>
Capabilities: [e00] Data Link Feature <?>
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia_drm, nvidia
The eDP only advertises
Established Timings I & II: none Standard Timings: none Detailed Timing Descriptors: DTD 1: 1920x1080 144.019139 Hz 16:9 164.182 kHz 361.200000 MHz (382 mm x 215 mm) Hfront 108 Hsync 48 Hback 124 Hpol P Vfront 10 Vsync 10 Vback 40 Vpol N DTD 2: 1920x1080 60.007974 Hz 16:9 164.182 kHz 361.200000 MHz (382 mm x 215 mm) Hfront 108 Hsync 48 Hback 124 Hpol P Vfront 10 Vsync 10 Vback 1636 Vpol N
The server then adds
[ 27.659] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d) [ 27.659] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 27.659] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d) [ 27.659] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d) [ 27.659] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d) [ 27.659] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
See whether you can prevent that w/ /etc/X11/xorg.conf.d/11-monitor.conf
Section "Monitor" Identifier "eDP-1-1" # nb. that the name will change if you run on the intel chip, you have to match the name from xrandr Option "DefaultModes" "False" EndSection
If so, you can then add desireable modes manually.
If not, please check the behavior when running on the intel chip (and post an xorg log for that)
Adding /etc/X11/xorg.conf.d/11-monitor.conf with the config you posted above didn't help. Setting it to use the Intel chip as the primary CPU didn't help either. I still see all the same modes.
Here's the xorg log when running on the Intel chip. The last line at 123.053 was after I tried setting the display mode to 640x480x85 in the system settings (which did nothing).
[ 18.591] (--) Log file renamed from "/var/log/Xorg.pid-1178.log" to "/var/log/Xorg.0.log"
[ 18.592]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 18.592] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 18.592] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=2f51c3fe-cfe9-4f35-9a30-b380ac14f41a rw nvidia_drm.modeset=1 zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=a520b9f2-08a5-4991-946f-e67df9a9b071:archlinux quiet loglevel=3 audit=0
[ 18.592]
[ 18.592] Current version of pixman: 0.42.2
[ 18.592] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.592] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.592] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 26 20:44:42 2023
[ 18.594] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.594] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.594] (==) No Layout section. Using the first Screen section.
[ 18.595] (==) No screen section available. Using defaults.
[ 18.595] (**) |-->Screen "Default Screen Section" (0)
[ 18.595] (**) | |-->Monitor "<default monitor>"
[ 18.595] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.595] (**) Option "IgnoreABI" "1"
[ 18.595] (**) Ignoring ABI Version
[ 18.595] (==) Automatically adding devices
[ 18.595] (==) Automatically enabling devices
[ 18.595] (==) Automatically adding GPU devices
[ 18.595] (==) Automatically binding GPU devices
[ 18.595] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.595] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 18.595] Entry deleted from font path.
[ 18.596] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 18.596] Entry deleted from font path.
[ 18.596] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 18.596] Entry deleted from font path.
[ 18.597] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 18.597] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.597] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.597] (II) Module ABI versions:
[ 18.597] X.Org ANSI C Emulation: 0.4
[ 18.597] X.Org Video Driver: 25.2
[ 18.597] X.Org XInput driver : 24.4
[ 18.597] X.Org Server Extension : 10.0
[ 18.599] (++) using VT number 2
[ 18.599] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 18.600] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.600] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 18.600] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.600] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 18.605] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.607] (--) PCI:*(0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 18.607] (--) PCI: (1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 18.607] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.607] (II) LoadModule: "glx"
[ 18.608] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.616] (II) Module glx: vendor="X.Org Foundation"
[ 18.616] compiled for 1.21.1.8, module version = 1.0.0
[ 18.616] ABI class: X.Org Server Extension, version 10.0
[ 18.616] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 18.616] loading driver: modesetting
[ 18.616] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.616] loading driver: nvidia
[ 18.616] (==) Matched modesetting as autoconfigured driver 0
[ 18.616] (==) Matched intel as autoconfigured driver 1
[ 18.616] (==) Matched nvidia as autoconfigured driver 2
[ 18.616] (==) Matched nouveau as autoconfigured driver 3
[ 18.616] (==) Matched nv as autoconfigured driver 4
[ 18.616] (==) Matched fbdev as autoconfigured driver 5
[ 18.616] (==) Matched vesa as autoconfigured driver 6
[ 18.616] (==) Assigned the driver to the xf86ConfigLayout
[ 18.616] (II) LoadModule: "modesetting"
[ 18.616] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.619] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.619] compiled for 1.21.1.8, module version = 1.21.1
[ 18.619] Module class: X.Org Video Driver
[ 18.619] ABI class: X.Org Video Driver, version 25.2
[ 18.619] (II) LoadModule: "intel"
[ 18.619] (WW) Warning, couldn't open module intel
[ 18.619] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.619] (II) LoadModule: "nvidia"
[ 18.619] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.628] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.628] compiled for 1.6.99.901, module version = 1.0.0
[ 18.628] Module class: X.Org Video Driver
[ 18.628] (II) LoadModule: "nouveau"
[ 18.628] (WW) Warning, couldn't open module nouveau
[ 18.628] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.628] (II) LoadModule: "nv"
[ 18.629] (WW) Warning, couldn't open module nv
[ 18.629] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.629] (II) LoadModule: "fbdev"
[ 18.629] (WW) Warning, couldn't open module fbdev
[ 18.629] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.629] (II) LoadModule: "vesa"
[ 18.629] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.630] (II) Module vesa: vendor="X.Org Foundation"
[ 18.630] compiled for 1.21.1.4, module version = 2.6.0
[ 18.630] Module class: X.Org Video Driver
[ 18.630] ABI class: X.Org Video Driver, version 25.2
[ 18.630] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.630] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 18.630] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.630] (II) VESA: driver for VESA chipsets: vesa
[ 18.638] (II) modeset(0): using drv /dev/dri/card1
[ 18.638] (II) modeset(G0): using drv /dev/dri/card0
[ 18.638] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.638] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 18.638] (==) modeset(0): RGB weight 888
[ 18.638] (==) modeset(0): Default visual is TrueColor
[ 18.638] (II) Loading sub module "glamoregl"
[ 18.638] (II) LoadModule: "glamoregl"
[ 18.638] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.643] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.643] compiled for 1.21.1.8, module version = 1.0.1
[ 18.643] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.098] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 19.098] (II) modeset(0): glamor initialized
[ 19.098] (==) modeset(0): VariableRefresh: disabled
[ 19.098] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 19.100] (II) modeset(0): Output eDP-1 has no monitor section
[ 19.100] (II) modeset(0): Output HDMI-1 has no monitor section
[ 19.102] (II) modeset(0): Output DP-1 has no monitor section
[ 19.102] (II) modeset(0): Output HDMI-2 has no monitor section
[ 19.104] (II) modeset(0): EDID for output eDP-1
[ 19.104] (II) modeset(0): Manufacturer: BOE Model: 823 Serial#: 0
[ 19.104] (II) modeset(0): Year: 2018 Week: 1
[ 19.104] (II) modeset(0): EDID Version: 1.4
[ 19.104] (II) modeset(0): Digital Display Input
[ 19.104] (II) modeset(0): 8 bits per channel
[ 19.104] (II) modeset(0): Digital interface is DisplayPort
[ 19.104] (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 19.104] (II) modeset(0): Gamma: 2.20
[ 19.104] (II) modeset(0): No DPMS capabilities specified
[ 19.104] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 19.104] (II) modeset(0): First detailed timing is preferred mode
[ 19.104] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 19.104] (II) modeset(0): Display is continuous-frequency
[ 19.104] (II) modeset(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 19.104] (II) modeset(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 19.104] (II) modeset(0): Manufacturer's mask: 0
[ 19.104] (II) modeset(0): Supported detailed timing:
[ 19.104] (II) modeset(0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 19.104] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 19.104] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 19.104] (II) modeset(0): Supported detailed timing:
[ 19.104] (II) modeset(0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 19.104] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 19.104] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 19.104] (II) modeset(0): Unknown vendor-specific block 2
[ 19.104] (II) modeset(0): EDID (in hex):
[ 19.104] (II) modeset(0): 00ffffffffffff0009e5230800000000
[ 19.104] (II) modeset(0): 011c0104a526157803de50a3544c9926
[ 19.104] (II) modeset(0): 0f505400000001010101010101010101
[ 19.104] (II) modeset(0): 010101010101188d801871383c406c30
[ 19.104] (II) modeset(0): aa007ed71000001a188d801871387846
[ 19.104] (II) modeset(0): 6c30aa007ed71000001a000000000000
[ 19.104] (II) modeset(0): 00000000000000000000000000000002
[ 19.104] (II) modeset(0): 000932ff0a3c962f1b439600000000b2
[ 19.104] (II) modeset(0): Printing probed modes for output eDP-1
[ 19.104] (II) modeset(0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 19.104] (II) modeset(0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 19.104] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 19.104] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 19.104] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 19.104] (II) modeset(0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 19.104] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 19.104] (II) modeset(0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 19.104] (II) modeset(0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 19.104] (II) modeset(0): EDID for output HDMI-1
[ 19.105] (II) modeset(0): EDID for output DP-1
[ 19.105] (II) modeset(0): EDID for output HDMI-2
[ 19.105] (II) modeset(0): Output eDP-1 connected
[ 19.105] (II) modeset(0): Output HDMI-1 disconnected
[ 19.105] (II) modeset(0): Output DP-1 disconnected
[ 19.105] (II) modeset(0): Output HDMI-2 disconnected
[ 19.105] (II) modeset(0): Using exact sizes for initial modes
[ 19.105] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 19.105] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.105] (==) modeset(0): DPI set to (96, 96)
[ 19.105] (II) Loading sub module "fb"
[ 19.105] (II) LoadModule: "fb"
[ 19.105] (II) Module "fb" already built-in
[ 19.105] (II) modeset(G0): Using 24bpp hw front buffer with 32bpp shadow
[ 19.105] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 19.105] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 19.105] (==) modeset(G0): RGB weight 888
[ 19.105] (==) modeset(G0): Default visual is TrueColor
[ 19.105] (**) modeset(G0): Cannot use glamor with 24bpp packed fb
[ 19.105] (II) modeset(G0): ShadowFB: preferred YES, enabled FORCE
[ 19.105] (II) modeset(G0): Double-buffered shadow updates: off
[ 19.105] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.105] (==) modeset(G0): DPI set to (96, 96)
[ 19.105] (II) Loading sub module "fb"
[ 19.105] (II) LoadModule: "fb"
[ 19.105] (II) Module "fb" already built-in
[ 19.105] (II) Loading sub module "shadow"
[ 19.105] (II) LoadModule: "shadow"
[ 19.105] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 19.105] (II) Module shadow: vendor="X.Org Foundation"
[ 19.105] compiled for 1.21.1.8, module version = 1.1.0
[ 19.105] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.105] (II) UnloadModule: "nvidia"
[ 19.105] (II) Unloading nvidia
[ 19.105] (II) UnloadModule: "vesa"
[ 19.105] (II) Unloading vesa
[ 19.119] (==) modeset(0): Backing store enabled
[ 19.119] (==) modeset(0): Silken mouse enabled
[ 19.152] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 19.152] (==) modeset(0): DPMS enabled
[ 19.152] (II) modeset(0): [DRI2] Setup complete
[ 19.152] (II) modeset(0): [DRI2] DRI driver: iris
[ 19.152] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 19.152] (==) modeset(G0): Backing store enabled
[ 19.152] (==) modeset(G0): Silken mouse enabled
[ 19.152] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 19.152] (==) modeset(G0): DPMS enabled
[ 19.152] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 19.152] (II) Initializing extension Generic Event Extension
[ 19.153] (II) Initializing extension SHAPE
[ 19.153] (II) Initializing extension MIT-SHM
[ 19.153] (II) Initializing extension XInputExtension
[ 19.153] (II) Initializing extension XTEST
[ 19.153] (II) Initializing extension BIG-REQUESTS
[ 19.153] (II) Initializing extension SYNC
[ 19.153] (II) Initializing extension XKEYBOARD
[ 19.153] (II) Initializing extension XC-MISC
[ 19.153] (II) Initializing extension SECURITY
[ 19.153] (II) Initializing extension XFIXES
[ 19.153] (II) Initializing extension RENDER
[ 19.153] (II) Initializing extension RANDR
[ 19.153] (II) Initializing extension COMPOSITE
[ 19.153] (II) Initializing extension DAMAGE
[ 19.153] (II) Initializing extension MIT-SCREEN-SAVER
[ 19.153] (II) Initializing extension DOUBLE-BUFFER
[ 19.153] (II) Initializing extension RECORD
[ 19.153] (II) Initializing extension DPMS
[ 19.153] (II) Initializing extension Present
[ 19.154] (II) Initializing extension DRI3
[ 19.154] (II) Initializing extension X-Resource
[ 19.154] (II) Initializing extension XVideo
[ 19.154] (II) Initializing extension XVideo-MotionCompensation
[ 19.154] (II) Initializing extension GLX
[ 19.409] (II) AIGLX: Loaded and initialized iris
[ 19.409] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.409] (II) Initializing extension XFree86-VidModeExtension
[ 19.409] (II) Initializing extension XFree86-DGA
[ 19.409] (II) Initializing extension XFree86-DRI
[ 19.409] (II) Initializing extension DRI2
[ 19.409] (II) modeset(G0): Damage tracking initialized
[ 19.409] (II) modeset(0): Damage tracking initialized
[ 19.409] (II) modeset(0): Setting screen physical size to 508 x 285
[ 19.460] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.460] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 19.460] (**) Power Button: Applying InputClass "system-keyboard"
[ 19.460] (II) LoadModule: "libinput"
[ 19.461] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 19.463] (II) Module libinput: vendor="X.Org Foundation"
[ 19.463] compiled for 1.21.1.8, module version = 1.3.0
[ 19.463] Module class: X.Org XInput Driver
[ 19.463] ABI class: X.Org XInput driver, version 24.4
[ 19.463] (II) Using input driver 'libinput' for 'Power Button'
[ 19.463] (**) Power Button: always reports core events
[ 19.463] (**) Option "Device" "/dev/input/event3"
[ 19.465] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 19.465] (II) event3 - Power Button: device is a keyboard
[ 19.465] (II) event3 - Power Button: device removed
[ 19.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 19.487] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.487] (**) Option "xkb_layout" "us"
[ 19.487] (**) Option "xkb_variant" "altgr-intl"
[ 19.497] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 19.497] (II) event3 - Power Button: device is a keyboard
[ 19.497] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 19.497] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 19.497] (**) Video Bus: Applying InputClass "system-keyboard"
[ 19.497] (II) Using input driver 'libinput' for 'Video Bus'
[ 19.497] (**) Video Bus: always reports core events
[ 19.497] (**) Option "Device" "/dev/input/event13"
[ 19.497] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 19.497] (II) event13 - Video Bus: device is a keyboard
[ 19.497] (II) event13 - Video Bus: device removed
[ 19.570] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input41/event13"
[ 19.570] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.570] (**) Option "xkb_layout" "us"
[ 19.570] (**) Option "xkb_variant" "altgr-intl"
[ 19.570] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 19.570] (II) event13 - Video Bus: device is a keyboard
[ 19.570] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 19.570] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 19.570] (**) Power Button: Applying InputClass "system-keyboard"
[ 19.570] (II) Using input driver 'libinput' for 'Power Button'
[ 19.570] (**) Power Button: always reports core events
[ 19.570] (**) Option "Device" "/dev/input/event0"
[ 19.571] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 19.571] (II) event0 - Power Button: device is a keyboard
[ 19.571] (II) event0 - Power Button: device removed
[ 19.593] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 19.593] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 19.593] (**) Option "xkb_layout" "us"
[ 19.593] (**) Option "xkb_variant" "altgr-intl"
[ 19.593] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 19.593] (II) event0 - Power Button: device is a keyboard
[ 19.594] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 19.594] (II) No input driver specified, ignoring this device.
[ 19.594] (II) This device may have been added with another device file.
[ 19.594] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 19.594] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 19.594] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 19.594] (II) Using input driver 'libinput' for 'Sleep Button'
[ 19.594] (**) Sleep Button: always reports core events
[ 19.594] (**) Option "Device" "/dev/input/event1"
[ 19.594] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 19.594] (II) event1 - Sleep Button: device is a keyboard
[ 19.594] (II) event1 - Sleep Button: device removed
[ 19.626] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 19.626] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 19.626] (**) Option "xkb_layout" "us"
[ 19.626] (**) Option "xkb_variant" "altgr-intl"
[ 19.628] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 19.628] (II) event1 - Sleep Button: device is a keyboard
[ 19.630] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event11)
[ 19.630] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 19.630] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 19.630] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 19.630] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 19.630] (**) Option "Device" "/dev/input/event11"
[ 19.631] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 19.631] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 19.632] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 19.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input37/event11"
[ 19.703] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 19.703] (**) Option "xkb_layout" "us"
[ 19.703] (**) Option "xkb_variant" "altgr-intl"
[ 19.705] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 19.705] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 19.706] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 19.706] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 19.706] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 19.706] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 19.706] (**) Option "Device" "/dev/input/event5"
[ 19.765] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 19.765] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 19.766] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 19.796] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.796] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.796] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.796] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 19.796] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 19.797] (**) Option "AccelerationScheme" "none"
[ 19.797] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 19.797] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 19.797] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 19.855] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 19.855] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 19.856] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 19.856] (II) No input driver specified, ignoring this device.
[ 19.856] (II) This device may have been added with another device file.
[ 19.857] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event9)
[ 19.857] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 19.857] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 19.857] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 19.857] (**) Option "Device" "/dev/input/event9"
[ 19.858] (II) event9 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 19.858] (II) event9 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 19.859] (II) event9 - FTCS1000:01 2808:0102 Mouse: device removed
[ 19.896] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.896] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.896] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input38/event9"
[ 19.896] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 19.896] (**) Option "AccelerationScheme" "none"
[ 19.896] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 19.896] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 19.896] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 19.898] (II) event9 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 19.898] (II) event9 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 19.900] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 19.900] (II) No input driver specified, ignoring this device.
[ 19.900] (II) This device may have been added with another device file.
[ 19.900] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event10)
[ 19.900] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 19.900] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 19.900] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 19.900] (**) Option "Device" "/dev/input/event10"
[ 19.902] (II) event10 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 19.903] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 19.903] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 19.966] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.966] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.966] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 19.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input39/event10"
[ 19.967] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 19.970] (**) Option "AccelerationScheme" "none"
[ 19.970] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 19.970] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 19.970] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 19.971] (II) event10 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 19.972] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 19.972] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 19.972] (II) No input driver specified, ignoring this device.
[ 19.972] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 19.973] (II) No input driver specified, ignoring this device.
[ 19.973] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 19.973] (II) No input driver specified, ignoring this device.
[ 19.973] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 19.973] (II) No input driver specified, ignoring this device.
[ 19.973] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 19.973] (II) No input driver specified, ignoring this device.
[ 19.973] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 19.973] (II) No input driver specified, ignoring this device.
[ 19.973] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 19.973] (II) No input driver specified, ignoring this device.
[ 19.973] (II) This device may have been added with another device file.
[ 19.973] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 19.973] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 19.973] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 19.973] (II) Using input driver 'libinput' for 'Intel HID events'
[ 19.973] (**) Intel HID events: always reports core events
[ 19.973] (**) Option "Device" "/dev/input/event7"
[ 19.974] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 19.974] (II) event7 - Intel HID events: device is a keyboard
[ 19.974] (II) event7 - Intel HID events: device removed
[ 19.993] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input31/event7"
[ 19.993] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 19.993] (**) Option "xkb_layout" "us"
[ 19.993] (**) Option "xkb_variant" "altgr-intl"
[ 19.995] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 19.995] (II) event7 - Intel HID events: device is a keyboard
[ 19.996] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 19.996] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 19.996] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 19.996] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 19.996] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.996] (**) Option "Device" "/dev/input/event4"
[ 19.997] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 19.997] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 19.998] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 20.033] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 20.033] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 20.033] (**) Option "xkb_layout" "us"
[ 20.033] (**) Option "xkb_variant" "altgr-intl"
[ 20.034] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 20.035] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 20.037] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 20.037] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 20.037] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 20.037] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 20.037] (**) Option "Device" "/dev/input/event12"
[ 20.038] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 20.038] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 20.039] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 20.086] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.086] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.086] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.086] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input33/event12"
[ 20.086] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 20.087] (**) Option "AccelerationScheme" "none"
[ 20.087] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 20.087] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 20.087] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 20.088] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 20.089] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 20.090] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 20.090] (II) No input driver specified, ignoring this device.
[ 20.090] (II) This device may have been added with another device file.
[ 20.090] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 20.090] (II) No input driver specified, ignoring this device.
[ 20.090] (II) This device may have been added with another device file.
[ 20.092] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event6)
[ 20.092] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 20.092] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 20.092] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 20.092] (**) TUXEDO Keyboard: always reports core events
[ 20.092] (**) Option "Device" "/dev/input/event6"
[ 20.093] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 20.093] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 20.093] (II) event6 - TUXEDO Keyboard: device removed
[ 20.150] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input30/event6"
[ 20.150] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 20.150] (**) Option "xkb_layout" "us"
[ 20.150] (**) Option "xkb_variant" "altgr-intl"
[ 20.151] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 20.151] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 28.234] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 28.234] (II) modeset(0): Printing DDC gathered Modelines:
[ 28.234] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 28.234] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 29.638] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 29.638] (II) modeset(0): Printing DDC gathered Modelines:
[ 29.638] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 29.638] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 29.762] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 32.064] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 32.064] (II) modeset(0): Printing DDC gathered Modelines:
[ 32.064] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 32.064] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 32.078] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 32.078] (II) modeset(0): Printing DDC gathered Modelines:
[ 32.078] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 32.078] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 123.053] (EE) modeset(0): failed to set mode: No such file or directory
Sidebar:
root=UUID=<redacted>
The UUID is meaningless and only exists for collision prevention.
Thank you. I thought that might be the case, but decided to remove it just to be on the safe side.
Offline
to be able to disable vsync in NVIDIA settings
You'd have to enable prime-sync anyway first if the output was wired to the intel chip there as well.
Also https://wiki.archlinux.org/title/Intel_ … on_(VSYNC) (exporting "vblank_mode=0" to a process has the same effect)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA107M [GeForce RTX 3050 Mobile] [10de:25a2] (rev a1) (prog-if 00 [VGA cont
Doesn't show up as a pure accelerator, what's the output of
xrandr --listproviders
The new xorg log has a server running on the intel chip, but
1. the "DefaultModes" option doesn't show up (the identifier, as hinted, changed to "eDP-1")
2. the nvidia chip is operated by the modesetting driver as well
Please post all custom configs you're using and ensure that "DefaultModes" is ignored *despite* showing up in the log.
Offline
to be able to disable vsync in NVIDIA settings
You'd have to enable prime-sync anyway first if the output was wired to the intel chip there as well.
Also https://wiki.archlinux.org/title/Intel_ … on_(VSYNC) (exporting "vblank_mode=0" to a process has the same effect)
Disabling vsync was definitely working on the old laptop without having to disable it on the Intel chip with vblank_mode=0.
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA107M [GeForce RTX 3050 Mobile] [10de:25a2] (rev a1) (prog-if 00 [VGA cont
Doesn't show up as a pure accelerator, what's the output of
xrandr --listproviders
xrandr --listproviders in Intel hybrid mode:
Providers: number : 2
Provider 0: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 4 associated providers: 0 name:modesetting
Provider 1: id: 0xf8 cap: 0x0 crtcs: 0 outputs: 0 associated providers: 0 name:modesetting
xrandr --listproviders in NVIDIA mode (after removing nvidia_drm.modeset=1 from the kernel command line) :
Providers: number : 2
Provider 0: id: 0x1b7 cap: 0x1, Source Output crtcs: 0 outputs: 0 associated providers: 1 name:NVIDIA-0
Provider 1: id: 0x1de cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 4 associated providers: 1 name:modesetting
The new xorg log has a server running on the intel chip, but
1. the "DefaultModes" option doesn't show up (the identifier, as hinted, changed to "eDP-1")
Ah, sorry about that. I forgot to change it
Changing the identifier to eDP-1 didn't get rid of the modes, but I did see (**) modeset(0): Option "DefaultModes" "False" in the log afterwards.
[ 20.364] (--) Log file renamed from "/var/log/Xorg.pid-1179.log" to "/var/log/Xorg.0.log"
[ 20.366]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 20.366] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 20.366] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=2f51c3fe-cfe9-4f35-9a30-b380ac14f41a rw nvidia_drm.modeset=1 zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=a520b9f2-08a5-4991-946f-e67df9a9b071:archlinux quiet loglevel=3 audit=0
[ 20.366]
[ 20.366] Current version of pixman: 0.42.2
[ 20.366] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.366] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.366] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 26 21:59:20 2023
[ 20.366] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.366] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.367] (==) No Layout section. Using the first Screen section.
[ 20.367] (==) No screen section available. Using defaults.
[ 20.367] (**) |-->Screen "Default Screen Section" (0)
[ 20.367] (**) | |-->Monitor "<default monitor>"
[ 20.367] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.367] (**) Option "IgnoreABI" "1"
[ 20.367] (**) Ignoring ABI Version
[ 20.367] (==) Automatically adding devices
[ 20.367] (==) Automatically enabling devices
[ 20.367] (==) Automatically adding GPU devices
[ 20.367] (==) Automatically binding GPU devices
[ 20.367] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 20.367] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 20.367] Entry deleted from font path.
[ 20.368] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 20.368] Entry deleted from font path.
[ 20.368] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 20.368] Entry deleted from font path.
[ 20.369] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 20.369] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.369] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.369] (II) Module ABI versions:
[ 20.369] X.Org ANSI C Emulation: 0.4
[ 20.369] X.Org Video Driver: 25.2
[ 20.369] X.Org XInput driver : 24.4
[ 20.369] X.Org Server Extension : 10.0
[ 20.369] (++) using VT number 2
[ 20.369] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 20.370] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.370] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 20.370] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 20.370] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 20.374] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 20.375] (--) PCI:*(0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 20.375] (--) PCI: (1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 20.375] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.375] (II) LoadModule: "glx"
[ 20.376] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.382] (II) Module glx: vendor="X.Org Foundation"
[ 20.382] compiled for 1.21.1.8, module version = 1.0.0
[ 20.382] ABI class: X.Org Server Extension, version 10.0
[ 20.382] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 20.382] loading driver: modesetting
[ 20.382] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 20.382] loading driver: nvidia
[ 20.382] (==) Matched modesetting as autoconfigured driver 0
[ 20.382] (==) Matched intel as autoconfigured driver 1
[ 20.382] (==) Matched nvidia as autoconfigured driver 2
[ 20.382] (==) Matched nouveau as autoconfigured driver 3
[ 20.382] (==) Matched nv as autoconfigured driver 4
[ 20.382] (==) Matched fbdev as autoconfigured driver 5
[ 20.382] (==) Matched vesa as autoconfigured driver 6
[ 20.382] (==) Assigned the driver to the xf86ConfigLayout
[ 20.382] (II) LoadModule: "modesetting"
[ 20.383] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.385] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.385] compiled for 1.21.1.8, module version = 1.21.1
[ 20.385] Module class: X.Org Video Driver
[ 20.385] ABI class: X.Org Video Driver, version 25.2
[ 20.385] (II) LoadModule: "intel"
[ 20.385] (WW) Warning, couldn't open module intel
[ 20.385] (EE) Failed to load module "intel" (module does not exist, 0)
[ 20.385] (II) LoadModule: "nvidia"
[ 20.385] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 20.389] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.389] compiled for 1.6.99.901, module version = 1.0.0
[ 20.389] Module class: X.Org Video Driver
[ 20.390] (II) LoadModule: "nouveau"
[ 20.390] (WW) Warning, couldn't open module nouveau
[ 20.390] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 20.390] (II) LoadModule: "nv"
[ 20.390] (WW) Warning, couldn't open module nv
[ 20.390] (EE) Failed to load module "nv" (module does not exist, 0)
[ 20.390] (II) LoadModule: "fbdev"
[ 20.390] (WW) Warning, couldn't open module fbdev
[ 20.390] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 20.390] (II) LoadModule: "vesa"
[ 20.390] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.391] (II) Module vesa: vendor="X.Org Foundation"
[ 20.391] compiled for 1.21.1.4, module version = 2.6.0
[ 20.391] Module class: X.Org Video Driver
[ 20.391] ABI class: X.Org Video Driver, version 25.2
[ 20.391] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.391] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 20.391] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 20.391] (II) VESA: driver for VESA chipsets: vesa
[ 20.401] (II) modeset(0): using drv /dev/dri/card1
[ 20.401] (II) modeset(G0): using drv /dev/dri/card0
[ 20.401] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.401] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 20.401] (==) modeset(0): RGB weight 888
[ 20.401] (==) modeset(0): Default visual is TrueColor
[ 20.401] (II) Loading sub module "glamoregl"
[ 20.401] (II) LoadModule: "glamoregl"
[ 20.401] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 20.406] (II) Module glamoregl: vendor="X.Org Foundation"
[ 20.406] compiled for 1.21.1.8, module version = 1.0.1
[ 20.406] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.848] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 20.848] (II) modeset(0): glamor initialized
[ 20.848] (==) modeset(0): VariableRefresh: disabled
[ 20.848] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 20.850] (II) modeset(0): Output eDP-1 using monitor section eDP-1
[ 20.850] (**) modeset(0): Option "DefaultModes" "False"
[ 20.850] (II) modeset(0): Output HDMI-1 has no monitor section
[ 20.851] (II) modeset(0): Output DP-1 has no monitor section
[ 20.851] (II) modeset(0): Output HDMI-2 has no monitor section
[ 20.853] (II) modeset(0): EDID for output eDP-1
[ 20.853] (II) modeset(0): Manufacturer: BOE Model: 823 Serial#: 0
[ 20.853] (II) modeset(0): Year: 2018 Week: 1
[ 20.853] (II) modeset(0): EDID Version: 1.4
[ 20.853] (II) modeset(0): Digital Display Input
[ 20.853] (II) modeset(0): 8 bits per channel
[ 20.853] (II) modeset(0): Digital interface is DisplayPort
[ 20.853] (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 20.853] (II) modeset(0): Gamma: 2.20
[ 20.853] (II) modeset(0): No DPMS capabilities specified
[ 20.853] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 20.853] (II) modeset(0): First detailed timing is preferred mode
[ 20.853] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 20.853] (II) modeset(0): Display is continuous-frequency
[ 20.853] (II) modeset(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 20.854] (II) modeset(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 20.854] (II) modeset(0): Manufacturer's mask: 0
[ 20.854] (II) modeset(0): Supported detailed timing:
[ 20.854] (II) modeset(0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 20.854] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 20.854] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 20.854] (II) modeset(0): Supported detailed timing:
[ 20.854] (II) modeset(0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 20.854] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 20.854] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 20.854] (II) modeset(0): Unknown vendor-specific block 2
[ 20.854] (II) modeset(0): EDID (in hex):
[ 20.854] (II) modeset(0): 00ffffffffffff0009e5230800000000
[ 20.854] (II) modeset(0): 011c0104a526157803de50a3544c9926
[ 20.854] (II) modeset(0): 0f505400000001010101010101010101
[ 20.854] (II) modeset(0): 010101010101188d801871383c406c30
[ 20.854] (II) modeset(0): aa007ed71000001a188d801871387846
[ 20.854] (II) modeset(0): 6c30aa007ed71000001a000000000000
[ 20.854] (II) modeset(0): 00000000000000000000000000000002
[ 20.854] (II) modeset(0): 000932ff0a3c962f1b439600000000b2
[ 20.854] (II) modeset(0): Printing probed modes for output eDP-1
[ 20.854] (II) modeset(0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 20.854] (II) modeset(0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 20.854] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 20.854] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 20.854] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 20.854] (II) modeset(0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 20.854] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 20.854] (II) modeset(0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 20.854] (II) modeset(0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 20.854] (II) modeset(0): EDID for output HDMI-1
[ 20.854] (II) modeset(0): EDID for output DP-1
[ 20.854] (II) modeset(0): EDID for output HDMI-2
[ 20.854] (II) modeset(0): Output eDP-1 connected
[ 20.854] (II) modeset(0): Output HDMI-1 disconnected
[ 20.854] (II) modeset(0): Output DP-1 disconnected
[ 20.854] (II) modeset(0): Output HDMI-2 disconnected
[ 20.854] (II) modeset(0): Using exact sizes for initial modes
[ 20.854] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 20.854] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.854] (==) modeset(0): DPI set to (96, 96)
[ 20.854] (II) Loading sub module "fb"
[ 20.854] (II) LoadModule: "fb"
[ 20.854] (II) Module "fb" already built-in
[ 20.854] (II) modeset(G0): Using 24bpp hw front buffer with 32bpp shadow
[ 20.854] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 20.854] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 20.854] (==) modeset(G0): RGB weight 888
[ 20.854] (==) modeset(G0): Default visual is TrueColor
[ 20.854] (**) modeset(G0): Cannot use glamor with 24bpp packed fb
[ 20.854] (II) modeset(G0): ShadowFB: preferred YES, enabled FORCE
[ 20.854] (II) modeset(G0): Double-buffered shadow updates: off
[ 20.854] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.854] (==) modeset(G0): DPI set to (96, 96)
[ 20.854] (II) Loading sub module "fb"
[ 20.854] (II) LoadModule: "fb"
[ 20.854] (II) Module "fb" already built-in
[ 20.854] (II) Loading sub module "shadow"
[ 20.854] (II) LoadModule: "shadow"
[ 20.854] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 20.855] (II) Module shadow: vendor="X.Org Foundation"
[ 20.855] compiled for 1.21.1.8, module version = 1.1.0
[ 20.855] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.855] (II) UnloadModule: "nvidia"
[ 20.855] (II) Unloading nvidia
[ 20.855] (II) UnloadModule: "vesa"
[ 20.855] (II) Unloading vesa
[ 20.869] (==) modeset(0): Backing store enabled
[ 20.869] (==) modeset(0): Silken mouse enabled
[ 20.901] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 20.901] (==) modeset(0): DPMS enabled
[ 20.901] (II) modeset(0): [DRI2] Setup complete
[ 20.901] (II) modeset(0): [DRI2] DRI driver: iris
[ 20.901] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 20.901] (==) modeset(G0): Backing store enabled
[ 20.901] (==) modeset(G0): Silken mouse enabled
[ 20.901] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 20.901] (==) modeset(G0): DPMS enabled
[ 20.901] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 20.901] (II) Initializing extension Generic Event Extension
[ 20.902] (II) Initializing extension SHAPE
[ 20.902] (II) Initializing extension MIT-SHM
[ 20.902] (II) Initializing extension XInputExtension
[ 20.902] (II) Initializing extension XTEST
[ 20.902] (II) Initializing extension BIG-REQUESTS
[ 20.902] (II) Initializing extension SYNC
[ 20.902] (II) Initializing extension XKEYBOARD
[ 20.902] (II) Initializing extension XC-MISC
[ 20.902] (II) Initializing extension SECURITY
[ 20.902] (II) Initializing extension XFIXES
[ 20.902] (II) Initializing extension RENDER
[ 20.902] (II) Initializing extension RANDR
[ 20.902] (II) Initializing extension COMPOSITE
[ 20.902] (II) Initializing extension DAMAGE
[ 20.902] (II) Initializing extension MIT-SCREEN-SAVER
[ 20.902] (II) Initializing extension DOUBLE-BUFFER
[ 20.902] (II) Initializing extension RECORD
[ 20.902] (II) Initializing extension DPMS
[ 20.903] (II) Initializing extension Present
[ 20.903] (II) Initializing extension DRI3
[ 20.903] (II) Initializing extension X-Resource
[ 20.903] (II) Initializing extension XVideo
[ 20.903] (II) Initializing extension XVideo-MotionCompensation
[ 20.903] (II) Initializing extension GLX
[ 21.158] (II) AIGLX: Loaded and initialized iris
[ 21.158] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.158] (II) Initializing extension XFree86-VidModeExtension
[ 21.158] (II) Initializing extension XFree86-DGA
[ 21.158] (II) Initializing extension XFree86-DRI
[ 21.158] (II) Initializing extension DRI2
[ 21.158] (II) modeset(G0): Damage tracking initialized
[ 21.158] (II) modeset(0): Damage tracking initialized
[ 21.158] (II) modeset(0): Setting screen physical size to 508 x 285
[ 21.209] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.209] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.209] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.209] (II) LoadModule: "libinput"
[ 21.209] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.211] (II) Module libinput: vendor="X.Org Foundation"
[ 21.211] compiled for 1.21.1.8, module version = 1.3.0
[ 21.211] Module class: X.Org XInput Driver
[ 21.211] ABI class: X.Org XInput driver, version 24.4
[ 21.211] (II) Using input driver 'libinput' for 'Power Button'
[ 21.211] (**) Power Button: always reports core events
[ 21.211] (**) Option "Device" "/dev/input/event3"
[ 21.213] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.213] (II) event3 - Power Button: device is a keyboard
[ 21.213] (II) event3 - Power Button: device removed
[ 21.263] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.263] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.263] (**) Option "xkb_layout" "us"
[ 21.263] (**) Option "xkb_variant" "altgr-intl"
[ 21.273] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.273] (II) event3 - Power Button: device is a keyboard
[ 21.273] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 21.273] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 21.273] (**) Video Bus: Applying InputClass "system-keyboard"
[ 21.273] (II) Using input driver 'libinput' for 'Video Bus'
[ 21.273] (**) Video Bus: always reports core events
[ 21.273] (**) Option "Device" "/dev/input/event13"
[ 21.273] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 21.273] (II) event13 - Video Bus: device is a keyboard
[ 21.273] (II) event13 - Video Bus: device removed
[ 21.353] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input58/event13"
[ 21.353] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.353] (**) Option "xkb_layout" "us"
[ 21.353] (**) Option "xkb_variant" "altgr-intl"
[ 21.354] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 21.354] (II) event13 - Video Bus: device is a keyboard
[ 21.355] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.355] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.355] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.355] (II) Using input driver 'libinput' for 'Power Button'
[ 21.355] (**) Power Button: always reports core events
[ 21.355] (**) Option "Device" "/dev/input/event0"
[ 21.356] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.356] (II) event0 - Power Button: device is a keyboard
[ 21.356] (II) event0 - Power Button: device removed
[ 21.406] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 21.406] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.406] (**) Option "xkb_layout" "us"
[ 21.406] (**) Option "xkb_variant" "altgr-intl"
[ 21.408] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.408] (II) event0 - Power Button: device is a keyboard
[ 21.409] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 21.409] (II) No input driver specified, ignoring this device.
[ 21.409] (II) This device may have been added with another device file.
[ 21.409] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 21.409] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 21.410] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.410] (II) Using input driver 'libinput' for 'Sleep Button'
[ 21.410] (**) Sleep Button: always reports core events
[ 21.410] (**) Option "Device" "/dev/input/event1"
[ 21.410] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.411] (II) event1 - Sleep Button: device is a keyboard
[ 21.411] (II) event1 - Sleep Button: device removed
[ 21.443] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 21.443] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.443] (**) Option "xkb_layout" "us"
[ 21.443] (**) Option "xkb_variant" "altgr-intl"
[ 21.444] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.445] (II) event1 - Sleep Button: device is a keyboard
[ 21.446] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event9)
[ 21.446] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 21.446] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 21.446] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 21.446] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 21.446] (**) Option "Device" "/dev/input/event9"
[ 21.448] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 21.448] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 21.448] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 21.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input54/event9"
[ 21.496] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 21.496] (**) Option "xkb_layout" "us"
[ 21.496] (**) Option "xkb_variant" "altgr-intl"
[ 21.498] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 21.499] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 21.500] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 21.500] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 21.500] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 21.500] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 21.500] (**) Option "Device" "/dev/input/event5"
[ 21.558] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 21.558] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 21.558] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 21.590] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.590] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.590] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 21.590] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 21.590] (**) Option "AccelerationScheme" "none"
[ 21.590] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 21.590] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 21.590] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 21.648] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 21.648] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 21.649] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 21.649] (II) No input driver specified, ignoring this device.
[ 21.649] (II) This device may have been added with another device file.
[ 21.650] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event10)
[ 21.650] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 21.650] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 21.650] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 21.650] (**) Option "Device" "/dev/input/event10"
[ 21.651] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.652] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 21.653] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 21.733] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.733] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.733] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.733] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input55/event10"
[ 21.733] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 21.733] (**) Option "AccelerationScheme" "none"
[ 21.733] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 21.733] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 21.733] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 21.733] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.734] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 21.734] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 21.734] (II) No input driver specified, ignoring this device.
[ 21.734] (II) This device may have been added with another device file.
[ 21.734] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event11)
[ 21.734] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 21.734] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 21.734] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 21.734] (**) Option "Device" "/dev/input/event11"
[ 21.735] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 21.736] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 21.736] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 21.790] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.790] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.790] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.790] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input56/event11"
[ 21.790] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 21.791] (**) Option "AccelerationScheme" "none"
[ 21.791] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 21.791] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 21.791] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 21.792] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 21.793] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 21.794] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 21.794] (II) No input driver specified, ignoring this device.
[ 21.794] (II) This device may have been added with another device file.
[ 21.794] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 21.794] (II) No input driver specified, ignoring this device.
[ 21.794] (II) This device may have been added with another device file.
[ 21.794] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 21.794] (II) No input driver specified, ignoring this device.
[ 21.794] (II) This device may have been added with another device file.
[ 21.794] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 21.794] (II) No input driver specified, ignoring this device.
[ 21.794] (II) This device may have been added with another device file.
[ 21.794] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 21.794] (II) No input driver specified, ignoring this device.
[ 21.794] (II) This device may have been added with another device file.
[ 21.794] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 21.794] (II) No input driver specified, ignoring this device.
[ 21.794] (II) This device may have been added with another device file.
[ 21.795] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 21.795] (II) No input driver specified, ignoring this device.
[ 21.795] (II) This device may have been added with another device file.
[ 21.795] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 21.795] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 21.795] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 21.795] (II) Using input driver 'libinput' for 'Intel HID events'
[ 21.795] (**) Intel HID events: always reports core events
[ 21.795] (**) Option "Device" "/dev/input/event7"
[ 21.795] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.795] (II) event7 - Intel HID events: device is a keyboard
[ 21.795] (II) event7 - Intel HID events: device removed
[ 21.840] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input48/event7"
[ 21.840] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 21.840] (**) Option "xkb_layout" "us"
[ 21.840] (**) Option "xkb_variant" "altgr-intl"
[ 21.841] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.841] (II) event7 - Intel HID events: device is a keyboard
[ 21.842] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 21.842] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.842] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.842] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.842] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.842] (**) Option "Device" "/dev/input/event4"
[ 21.844] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.844] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.845] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 21.876] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 21.876] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 21.876] (**) Option "xkb_layout" "us"
[ 21.876] (**) Option "xkb_variant" "altgr-intl"
[ 21.878] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.878] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.881] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 21.881] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 21.881] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 21.881] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 21.881] (**) Option "Device" "/dev/input/event12"
[ 21.882] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.882] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.883] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 21.940] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.940] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.940] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.940] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input50/event12"
[ 21.940] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 21.940] (**) Option "AccelerationScheme" "none"
[ 21.940] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 21.940] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 21.940] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 21.942] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.942] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.943] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 21.943] (II) No input driver specified, ignoring this device.
[ 21.943] (II) This device may have been added with another device file.
[ 21.944] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 21.944] (II) No input driver specified, ignoring this device.
[ 21.944] (II) This device may have been added with another device file.
[ 21.946] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event6)
[ 21.946] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.946] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 21.946] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 21.946] (**) TUXEDO Keyboard: always reports core events
[ 21.946] (**) Option "Device" "/dev/input/event6"
[ 21.946] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 21.946] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 21.946] (II) event6 - TUXEDO Keyboard: device removed
[ 21.986] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input47/event6"
[ 21.986] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 21.986] (**) Option "xkb_layout" "us"
[ 21.986] (**) Option "xkb_variant" "altgr-intl"
[ 21.988] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 21.988] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 26.159] (EE) event11 - FTCS1000:01 2808:0102 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[ 28.864] (EE) event11 - FTCS1000:01 2808:0102 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[ 33.858] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 33.858] (II) modeset(0): Printing DDC gathered Modelines:
[ 33.858] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 33.858] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 34.724] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 34.724] (II) modeset(0): Printing DDC gathered Modelines:
[ 34.724] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 34.724] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 34.747] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 36.900] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 36.900] (II) modeset(0): Printing DDC gathered Modelines:
[ 36.900] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 36.900] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 36.920] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 36.920] (II) modeset(0): Printing DDC gathered Modelines:
[ 36.920] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 36.920] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
2. the nvidia chip is operated by the modesetting driver as well
When trying to solve this issue myself before posting this forum topic, I did at one point add the kernel nvidia_drm.modeset=1. Other than that the setup is more or less identical to my old laptop (I cloned the old disk with dd).
Here's the xorg log after removing that kernel parameter again (and changing the identifier back to eDP-1-1 again in 11-monitor.conf).
[ 22.703] (--) Log file renamed from "/var/log/Xorg.pid-1165.log" to "/var/log/Xorg.0.log"
[ 22.704]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 22.704] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 22.704] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=2f51c3fe-cfe9-4f35-9a30-b380ac14f41a rw zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=a520b9f2-08a5-4991-946f-e67df9a9b071:archlinux quiet loglevel=3 audit=0
[ 22.704]
[ 22.704] Current version of pixman: 0.42.2
[ 22.704] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.704] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.704] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 26 22:16:10 2023
[ 22.705] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.705] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.705] (==) No Layout section. Using the first Screen section.
[ 22.705] (==) No screen section available. Using defaults.
[ 22.705] (**) |-->Screen "Default Screen Section" (0)
[ 22.705] (**) | |-->Monitor "<default monitor>"
[ 22.706] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.706] (**) Option "IgnoreABI" "1"
[ 22.706] (**) Ignoring ABI Version
[ 22.706] (==) Automatically adding devices
[ 22.706] (==) Automatically enabling devices
[ 22.706] (==) Automatically adding GPU devices
[ 22.706] (==) Automatically binding GPU devices
[ 22.706] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 22.706] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 22.706] Entry deleted from font path.
[ 22.707] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 22.707] Entry deleted from font path.
[ 22.707] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 22.707] Entry deleted from font path.
[ 22.708] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 22.708] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.708] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.708] (II) Module ABI versions:
[ 22.708] X.Org ANSI C Emulation: 0.4
[ 22.708] X.Org Video Driver: 25.2
[ 22.708] X.Org XInput driver : 24.4
[ 22.708] X.Org Server Extension : 10.0
[ 22.708] (++) using VT number 2
[ 22.708] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 22.709] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 22.709] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 22.709] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 22.709] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 22.715] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 22.715] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 23.050] (--) PCI: (0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 23.050] (--) PCI:*(1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 23.050] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.050] (II) LoadModule: "glx"
[ 23.051] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.054] (II) Module glx: vendor="X.Org Foundation"
[ 23.054] compiled for 1.21.1.8, module version = 1.0.0
[ 23.054] ABI class: X.Org Server Extension, version 10.0
[ 23.054] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 23.054] loading driver: nvidia
[ 23.054] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 23.054] loading driver: modesetting
[ 23.054] (==) Matched nvidia as autoconfigured driver 0
[ 23.054] (==) Matched nouveau as autoconfigured driver 1
[ 23.054] (==) Matched nv as autoconfigured driver 2
[ 23.054] (==) Matched modesetting as autoconfigured driver 3
[ 23.054] (==) Matched intel as autoconfigured driver 4
[ 23.054] (==) Matched fbdev as autoconfigured driver 5
[ 23.054] (==) Matched vesa as autoconfigured driver 6
[ 23.054] (==) Assigned the driver to the xf86ConfigLayout
[ 23.054] (II) LoadModule: "nvidia"
[ 23.055] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23.058] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23.058] compiled for 1.6.99.901, module version = 1.0.0
[ 23.058] Module class: X.Org Video Driver
[ 23.058] (II) LoadModule: "nouveau"
[ 23.058] (WW) Warning, couldn't open module nouveau
[ 23.058] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 23.058] (II) LoadModule: "nv"
[ 23.058] (WW) Warning, couldn't open module nv
[ 23.058] (EE) Failed to load module "nv" (module does not exist, 0)
[ 23.058] (II) LoadModule: "modesetting"
[ 23.058] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.060] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.060] compiled for 1.21.1.8, module version = 1.21.1
[ 23.060] Module class: X.Org Video Driver
[ 23.060] ABI class: X.Org Video Driver, version 25.2
[ 23.060] (II) LoadModule: "intel"
[ 23.060] (WW) Warning, couldn't open module intel
[ 23.060] (EE) Failed to load module "intel" (module does not exist, 0)
[ 23.060] (II) LoadModule: "fbdev"
[ 23.060] (WW) Warning, couldn't open module fbdev
[ 23.060] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.060] (II) LoadModule: "vesa"
[ 23.060] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.061] (II) Module vesa: vendor="X.Org Foundation"
[ 23.061] compiled for 1.21.1.4, module version = 2.6.0
[ 23.061] Module class: X.Org Video Driver
[ 23.061] ABI class: X.Org Video Driver, version 25.2
[ 23.061] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 23.061] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.061] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23.061] (II) VESA: driver for VESA chipsets: vesa
[ 23.070] (II) Loading sub module "fb"
[ 23.070] (II) LoadModule: "fb"
[ 23.070] (II) Module "fb" already built-in
[ 23.070] (II) Loading sub module "wfb"
[ 23.070] (II) LoadModule: "wfb"
[ 23.070] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23.070] (II) Module wfb: vendor="X.Org Foundation"
[ 23.070] compiled for 1.21.1.8, module version = 1.0.0
[ 23.070] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.071] (WW) Falling back to old probe method for modesetting
[ 23.075] (II) modeset(G0): using drv /dev/dri/card1
[ 23.075] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.075] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 23.075] (==) NVIDIA(0): RGB weight 888
[ 23.075] (==) NVIDIA(0): Default visual is TrueColor
[ 23.075] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.075] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 23.075] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 23.075] (**) NVIDIA(0): Enabling 2D acceleration
[ 23.075] (II) Loading sub module "glxserver_nvidia"
[ 23.075] (II) LoadModule: "glxserver_nvidia"
[ 23.075] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 23.104] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 23.104] compiled for 1.6.99.901, module version = 1.0.0
[ 23.104] Module class: X.Org Server Extension
[ 23.104] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 23.105] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 24.033] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3050 Laptop GPU (GA107-A) at
[ 24.033] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 24.033] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 24.033] (--) NVIDIA(0): VideoBIOS: 94.07.66.00.5d
[ 24.033] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.033] (II) NVIDIA(0): Validated MetaModes:
[ 24.033] (II) NVIDIA(0): "NULL"
[ 24.033] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 24.033] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 24.033] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 24.033] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 24.033] (==) modeset(G0): RGB weight 888
[ 24.033] (==) modeset(G0): Default visual is TrueColor
[ 24.033] (II) Loading sub module "glamoregl"
[ 24.033] (II) LoadModule: "glamoregl"
[ 24.033] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 24.037] (II) Module glamoregl: vendor="X.Org Foundation"
[ 24.037] compiled for 1.21.1.8, module version = 1.0.1
[ 24.037] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.543] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 24.543] (II) modeset(G0): glamor initialized
[ 24.546] (II) modeset(G0): Output eDP-1-1 using monitor section eDP-1-1
[ 24.546] (**) modeset(G0): Option "DefaultModes" "False"
[ 24.546] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 24.547] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 24.548] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 24.550] (II) modeset(G0): EDID for output eDP-1-1
[ 24.550] (II) modeset(G0): Manufacturer: BOE Model: 823 Serial#: 0
[ 24.550] (II) modeset(G0): Year: 2018 Week: 1
[ 24.550] (II) modeset(G0): EDID Version: 1.4
[ 24.550] (II) modeset(G0): Digital Display Input
[ 24.550] (II) modeset(G0): 8 bits per channel
[ 24.550] (II) modeset(G0): Digital interface is DisplayPort
[ 24.550] (II) modeset(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 24.550] (II) modeset(G0): Gamma: 2.20
[ 24.550] (II) modeset(G0): No DPMS capabilities specified
[ 24.550] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 24.550] (II) modeset(G0): First detailed timing is preferred mode
[ 24.550] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 24.550] (II) modeset(G0): Display is continuous-frequency
[ 24.550] (II) modeset(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 24.550] (II) modeset(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 24.550] (II) modeset(G0): Manufacturer's mask: 0
[ 24.550] (II) modeset(G0): Supported detailed timing:
[ 24.550] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 24.550] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 24.550] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 24.550] (II) modeset(G0): Supported detailed timing:
[ 24.550] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 24.550] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 24.550] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 24.550] (II) modeset(G0): Unknown vendor-specific block 2
[ 24.550] (II) modeset(G0): EDID (in hex):
[ 24.550] (II) modeset(G0): 00ffffffffffff0009e5230800000000
[ 24.550] (II) modeset(G0): 011c0104a526157803de50a3544c9926
[ 24.550] (II) modeset(G0): 0f505400000001010101010101010101
[ 24.550] (II) modeset(G0): 010101010101188d801871383c406c30
[ 24.550] (II) modeset(G0): aa007ed71000001a188d801871387846
[ 24.550] (II) modeset(G0): 6c30aa007ed71000001a000000000000
[ 24.550] (II) modeset(G0): 00000000000000000000000000000002
[ 24.550] (II) modeset(G0): 000932ff0a3c962f1b439600000000b2
[ 24.551] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 24.551] (II) modeset(G0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 24.551] (II) modeset(G0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 24.551] (II) modeset(G0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 24.551] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 24.551] (II) modeset(G0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 24.551] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 24.551] (II) modeset(G0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 24.551] (II) modeset(G0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 24.551] (II) modeset(G0): EDID for output HDMI-1-1
[ 24.551] (II) modeset(G0): EDID for output DP-1-1
[ 24.552] (II) modeset(G0): EDID for output HDMI-1-2
[ 24.552] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.552] (==) modeset(G0): DPI set to (96, 96)
[ 24.552] (II) Loading sub module "fb"
[ 24.552] (II) LoadModule: "fb"
[ 24.552] (II) Module "fb" already built-in
[ 24.552] (II) UnloadModule: "vesa"
[ 24.552] (II) Unloading vesa
[ 24.552] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 24.552] (II) NVIDIA: access.
[ 24.558] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24.558] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 24.558] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 24.558] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 24.558] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 24.558] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 24.558] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24.558] (II) NVIDIA(0): Config Options in the README.
[ 24.569] (II) NVIDIA(0): Setting mode "NULL"
[ 24.572] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 24.572] (==) NVIDIA(0): Backing store enabled
[ 24.572] (==) NVIDIA(0): Silken mouse enabled
[ 24.572] (==) NVIDIA(0): DPMS enabled
[ 24.572] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 24.572] (II) Loading sub module "dri2"
[ 24.572] (II) LoadModule: "dri2"
[ 24.572] (II) Module "dri2" already built-in
[ 24.572] (II) NVIDIA(0): [DRI2] Setup complete
[ 24.572] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 24.584] (==) modeset(G0): Backing store enabled
[ 24.584] (==) modeset(G0): Silken mouse enabled
[ 24.617] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 24.617] (==) modeset(G0): DPMS enabled
[ 24.617] (II) modeset(G0): [DRI2] Setup complete
[ 24.617] (II) modeset(G0): [DRI2] DRI driver: iris
[ 24.617] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 24.617] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 24.617] (II) Initializing extension Generic Event Extension
[ 24.618] (II) Initializing extension SHAPE
[ 24.618] (II) Initializing extension MIT-SHM
[ 24.618] (II) Initializing extension XInputExtension
[ 24.618] (II) Initializing extension XTEST
[ 24.619] (II) Initializing extension BIG-REQUESTS
[ 24.619] (II) Initializing extension SYNC
[ 24.619] (II) Initializing extension XKEYBOARD
[ 24.619] (II) Initializing extension XC-MISC
[ 24.619] (II) Initializing extension SECURITY
[ 24.620] (II) Initializing extension XFIXES
[ 24.620] (II) Initializing extension RENDER
[ 24.620] (II) Initializing extension RANDR
[ 24.620] (II) Initializing extension COMPOSITE
[ 24.621] (II) Initializing extension DAMAGE
[ 24.621] (II) Initializing extension MIT-SCREEN-SAVER
[ 24.621] (II) Initializing extension DOUBLE-BUFFER
[ 24.621] (II) Initializing extension RECORD
[ 24.621] (II) Initializing extension DPMS
[ 24.621] (II) Initializing extension Present
[ 24.621] (II) Initializing extension DRI3
[ 24.621] (II) Initializing extension X-Resource
[ 24.621] (II) Initializing extension XVideo
[ 24.622] (II) Initializing extension XVideo-MotionCompensation
[ 24.622] (II) Initializing extension GLX
[ 24.622] (II) Initializing extension GLX
[ 24.622] (II) Indirect GLX disabled.
[ 24.622] (II) GLX: Another vendor is already registered for screen 0
[ 24.622] (II) Initializing extension XFree86-VidModeExtension
[ 24.622] (II) Initializing extension XFree86-DGA
[ 24.622] (II) Initializing extension XFree86-DRI
[ 24.622] (II) Initializing extension DRI2
[ 24.622] (II) Initializing extension NV-GLX
[ 24.622] (II) Initializing extension NV-CONTROL
[ 25.416] (II) modeset(G0): Damage tracking initialized
[ 25.482] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.482] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.482] (**) Power Button: Applying InputClass "system-keyboard"
[ 25.482] (II) LoadModule: "libinput"
[ 25.482] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 25.484] (II) Module libinput: vendor="X.Org Foundation"
[ 25.484] compiled for 1.21.1.8, module version = 1.3.0
[ 25.484] Module class: X.Org XInput Driver
[ 25.484] ABI class: X.Org XInput driver, version 24.4
[ 25.484] (II) Using input driver 'libinput' for 'Power Button'
[ 25.484] (**) Power Button: always reports core events
[ 25.484] (**) Option "Device" "/dev/input/event3"
[ 25.486] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 25.486] (II) event3 - Power Button: device is a keyboard
[ 25.486] (II) event3 - Power Button: device removed
[ 25.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 25.515] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.515] (**) Option "xkb_layout" "us"
[ 25.515] (**) Option "xkb_variant" "altgr-intl"
[ 25.532] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 25.532] (II) event3 - Power Button: device is a keyboard
[ 25.533] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 25.533] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 25.533] (**) Video Bus: Applying InputClass "system-keyboard"
[ 25.533] (II) Using input driver 'libinput' for 'Video Bus'
[ 25.533] (**) Video Bus: always reports core events
[ 25.533] (**) Option "Device" "/dev/input/event13"
[ 25.533] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 25.533] (II) event13 - Video Bus: device is a keyboard
[ 25.533] (II) event13 - Video Bus: device removed
[ 25.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input478/event13"
[ 25.600] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.600] (**) Option "xkb_layout" "us"
[ 25.600] (**) Option "xkb_variant" "altgr-intl"
[ 25.601] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 25.602] (II) event13 - Video Bus: device is a keyboard
[ 25.603] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 25.603] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.603] (**) Power Button: Applying InputClass "system-keyboard"
[ 25.603] (II) Using input driver 'libinput' for 'Power Button'
[ 25.603] (**) Power Button: always reports core events
[ 25.603] (**) Option "Device" "/dev/input/event0"
[ 25.604] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 25.604] (II) event0 - Power Button: device is a keyboard
[ 25.604] (II) event0 - Power Button: device removed
[ 25.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 25.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 25.630] (**) Option "xkb_layout" "us"
[ 25.630] (**) Option "xkb_variant" "altgr-intl"
[ 25.631] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 25.631] (II) event0 - Power Button: device is a keyboard
[ 25.632] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.632] (II) No input driver specified, ignoring this device.
[ 25.632] (II) This device may have been added with another device file.
[ 25.633] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 25.633] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 25.633] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 25.633] (II) Using input driver 'libinput' for 'Sleep Button'
[ 25.633] (**) Sleep Button: always reports core events
[ 25.633] (**) Option "Device" "/dev/input/event1"
[ 25.634] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 25.634] (II) event1 - Sleep Button: device is a keyboard
[ 25.634] (II) event1 - Sleep Button: device removed
[ 25.653] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 25.653] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 25.653] (**) Option "xkb_layout" "us"
[ 25.653] (**) Option "xkb_variant" "altgr-intl"
[ 25.654] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 25.655] (II) event1 - Sleep Button: device is a keyboard
[ 25.656] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event9)
[ 25.656] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 25.657] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 25.657] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 25.657] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 25.657] (**) Option "Device" "/dev/input/event9"
[ 25.658] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 25.658] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 25.658] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 25.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input474/event9"
[ 25.726] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 25.726] (**) Option "xkb_layout" "us"
[ 25.726] (**) Option "xkb_variant" "altgr-intl"
[ 25.727] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 25.727] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 25.727] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 25.727] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 25.727] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 25.727] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 25.727] (**) Option "Device" "/dev/input/event5"
[ 25.785] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 25.785] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 25.785] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 25.816] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.816] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.816] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 25.816] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 25.817] (**) Option "AccelerationScheme" "none"
[ 25.817] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 25.817] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 25.817] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 25.875] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 25.875] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 25.876] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 25.876] (II) No input driver specified, ignoring this device.
[ 25.876] (II) This device may have been added with another device file.
[ 25.877] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event10)
[ 25.877] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 25.877] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 25.877] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 25.877] (**) Option "Device" "/dev/input/event10"
[ 25.878] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 25.878] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 25.878] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 25.916] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.916] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.916] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input475/event10"
[ 25.916] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 25.916] (**) Option "AccelerationScheme" "none"
[ 25.916] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 25.917] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 25.917] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 25.918] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 25.919] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 25.920] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 25.920] (II) No input driver specified, ignoring this device.
[ 25.920] (II) This device may have been added with another device file.
[ 25.921] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event11)
[ 25.921] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 25.921] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 25.921] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 25.921] (**) Option "Device" "/dev/input/event11"
[ 25.922] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 25.924] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 25.924] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 25.970] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.970] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.970] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input476/event11"
[ 25.970] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 25.972] (**) Option "AccelerationScheme" "none"
[ 25.972] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 25.972] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 25.972] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 25.974] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 25.975] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 25.976] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 25.976] (II) No input driver specified, ignoring this device.
[ 25.976] (II) This device may have been added with another device file.
[ 25.976] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 25.976] (II) No input driver specified, ignoring this device.
[ 25.976] (II) This device may have been added with another device file.
[ 25.976] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 25.976] (II) No input driver specified, ignoring this device.
[ 25.976] (II) This device may have been added with another device file.
[ 25.976] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 25.976] (II) No input driver specified, ignoring this device.
[ 25.976] (II) This device may have been added with another device file.
[ 25.976] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 25.976] (II) No input driver specified, ignoring this device.
[ 25.976] (II) This device may have been added with another device file.
[ 25.976] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 25.976] (II) No input driver specified, ignoring this device.
[ 25.976] (II) This device may have been added with another device file.
[ 25.977] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 25.977] (II) No input driver specified, ignoring this device.
[ 25.977] (II) This device may have been added with another device file.
[ 25.977] (II) config/udev: Adding input device Intel HID events (/dev/input/event6)
[ 25.977] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 25.977] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 25.977] (II) Using input driver 'libinput' for 'Intel HID events'
[ 25.977] (**) Intel HID events: always reports core events
[ 25.977] (**) Option "Device" "/dev/input/event6"
[ 25.977] (II) event6 - Intel HID events: is tagged by udev as: Keyboard
[ 25.977] (II) event6 - Intel HID events: device is a keyboard
[ 25.977] (II) event6 - Intel HID events: device removed
[ 26.000] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input467/event6"
[ 26.000] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 26.000] (**) Option "xkb_layout" "us"
[ 26.000] (**) Option "xkb_variant" "altgr-intl"
[ 26.001] (II) event6 - Intel HID events: is tagged by udev as: Keyboard
[ 26.001] (II) event6 - Intel HID events: device is a keyboard
[ 26.002] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 26.002] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 26.002] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 26.002] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 26.002] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.002] (**) Option "Device" "/dev/input/event4"
[ 26.004] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 26.004] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 26.005] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 26.026] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 26.026] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 26.026] (**) Option "xkb_layout" "us"
[ 26.026] (**) Option "xkb_variant" "altgr-intl"
[ 26.028] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 26.028] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 26.030] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 26.030] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 26.030] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 26.030] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 26.030] (**) Option "Device" "/dev/input/event12"
[ 26.031] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 26.031] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 26.031] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 26.070] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 26.070] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 26.070] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 26.070] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input470/event12"
[ 26.070] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 26.070] (**) Option "AccelerationScheme" "none"
[ 26.070] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 26.070] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 26.070] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 26.071] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 26.071] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 26.073] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 26.073] (II) No input driver specified, ignoring this device.
[ 26.073] (II) This device may have been added with another device file.
[ 26.073] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 26.073] (II) No input driver specified, ignoring this device.
[ 26.073] (II) This device may have been added with another device file.
[ 26.076] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event7)
[ 26.076] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 26.076] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 26.076] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 26.076] (**) TUXEDO Keyboard: always reports core events
[ 26.076] (**) Option "Device" "/dev/input/event7"
[ 26.076] (II) event7 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 26.076] (II) event7 - TUXEDO Keyboard: device is a keyboard
[ 26.077] (II) event7 - TUXEDO Keyboard: device removed
[ 26.123] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input468/event7"
[ 26.123] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 26.123] (**) Option "xkb_layout" "us"
[ 26.123] (**) Option "xkb_variant" "altgr-intl"
[ 26.124] (II) event7 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 26.125] (II) event7 - TUXEDO Keyboard: device is a keyboard
[ 26.157] randr: falling back to unsynchronized pixmap sharing
[ 35.587] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
Please post all custom configs you're using and ensure that "DefaultModes" is ignored *despite* showing up in the log.
/etc/X11/xorg.conf.d/11-monitor.conf (after changing back to NVIDIA again)
Section "Monitor"
Identifier "eDP-1-1" # nb. that the name will change if you run on the intel chip, you have to match the name from xrandr
Option "DefaultModes" "False"
EndSection
/etc/X11/xorg.conf.d/50-IgnoreABI.conf
Section "ServerFlags"
Option "IgnoreABI" "1"
EndSection
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf
Section "OutputClass"
Identifier "intel"
MatchDriver "i915"
Driver "modesetting"
EndSection
Section "OutputClass"
Identifier "nvidia"
MatchDriver "nvidia-drm"
Driver "nvidia"
Option "AllowEmptyInitialConfiguration"
Option "PrimaryGPU" "yes"
ModulePath "/usr/lib/nvidia/xorg"
ModulePath "/usr/lib/xorg/modules"
EndSection
Offline
It definitively worked because there was (likely) no sync to begin with if the output was addressed via reverse prime w/o prime sync.
But that's terribly off-topic.
---
Ftr, the nvidia chip has no crtc what effectively makes it a pure 3D accelerator.
after removing nvidia_drm.modeset=1 from the kernel command line
You're not using that to "control" what GPU you're running on, are you?
/etc/X11/xorg.conf.d/50-IgnoreABI.conf
Unrelated, but why is that there? You kinda need that w/ the unmaintained drivers (340xx) but otherwise this is just a terrible idea.
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf
Don't edit that file, it's under control of the package manager.
Restore the original, move this one to /etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf and use that to control whether you're running on the nvidia chip or not.
Not the nvidia_drm.modeset=1 parameter…
---
Back to the actual problem: since the modes get added you could try to shadow them w/ namesakes that all configure the same modeline
Section "Monitor"
Identifier "eDP-1-1"
Modeline "640x480x170.2" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "640x480x120.0" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "640x480x85.0" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "640x480x72.8" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "640x480x75.0" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "640x480x59.9" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection
wrt OP:
Trying xrandr --delmode eDP-1-1 640x480 didn't work, it wouldn't let me even when running it with root privileges.
Don't try to run xrandr as different user, also not as root.
"xrandr --verbose" will list the individual modes and you can address them by their id, eg. "xrandr --delmode eDP-1-1 0x2ae", but that approach will likely generate a BadMatch error as well.
Offline
after removing nvidia_drm.modeset=1 from the kernel command line
You're not using that to "control" what GPU you're running on, are you?
No, I'm using Option "PrimaryGPU" "yes" to control which GPU I'm running on (depending on whether it's commented out or not).
nvidia_drm.modeset=1 was just something I tried very early in the process of trying to solve this issue, and just left it there.
/etc/X11/xorg.conf.d/50-IgnoreABI.conf
Unrelated, but why is that there? You kinda need that w/ the unmaintained drivers (340xx) but otherwise this is just a terrible idea.
I don't remember exactly what it was for, it's a long time ago. I've removed it now.
/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf
Don't edit that file, it's under control of the package manager.
Restore the original, move this one to /etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf and use that to control whether you're running on the nvidia chip or not.
Not the nvidia_drm.modeset=1 parameter…
Thank you, I've copied it to /etc/X11/xorg.conf.d and put the original back to the way it was.
Back to the actual problem: since the modes get added you could try to shadow them w/ namesakes that all configure the same modeline
Section "Monitor" Identifier "eDP-1-1" Modeline "640x480x170.2" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync Modeline "640x480x120.0" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync Modeline "640x480x85.0" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync Modeline "640x480x72.8" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync Modeline "640x480x75.0" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync Modeline "640x480x59.9" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync EndSection
I just tried that, but it still gave a black screen when trying to set display mode 640x480@85Hz
Judging by xrandr, it seems to have simply added some extra lines in there instead of replacing the original mode.
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
1920x1080 144.02*+ 60.01 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 85.02 75.02 60.02
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 59.74
1024x768 85.00 75.05 60.04 85.00 75.03 70.07 60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 85.00 75.00 70.00 65.00 60.00 85.14 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 85.09 60.00 85.01 72.81 75.00 59.94
640x480x170.2 59.95
640x480x120.0 59.95
640x480x85.0 59.95
640x480x72.8 59.95
640x480x75.0 59.95
640x480x59.9 59.95
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
HDMI-1-1 disconnected (normal left inverted right x axis y axis)
DP-1-1 disconnected (normal left inverted right x axis y axis)
HDMI-1-2 disconnected (normal left inverted right x axis y axis)
Here are the xorg logs from the previous boot and the current boot.
/var/log/Xorg.0.log.old
[ 18.212] (--) Log file renamed from "/var/log/Xorg.pid-1180.log" to "/var/log/Xorg.0.log"
[ 18.213]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 18.213] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 18.213] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=2f51c3fe-cfe9-4f35-9a30-b380ac14f41a rw zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=a520b9f2-08a5-4991-946f-e67df9a9b071:archlinux quiet loglevel=3 audit=0
[ 18.213]
[ 18.213] Current version of pixman: 0.42.2
[ 18.213] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.213] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.213] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 27 00:01:47 2023
[ 18.214] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.214] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.214] (==) No Layout section. Using the first Screen section.
[ 18.214] (==) No screen section available. Using defaults.
[ 18.214] (**) |-->Screen "Default Screen Section" (0)
[ 18.214] (**) | |-->Monitor "<default monitor>"
[ 18.214] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.214] (==) Automatically adding devices
[ 18.214] (==) Automatically enabling devices
[ 18.214] (==) Automatically adding GPU devices
[ 18.214] (==) Automatically binding GPU devices
[ 18.214] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.215] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 18.215] Entry deleted from font path.
[ 18.215] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 18.215] Entry deleted from font path.
[ 18.215] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 18.215] Entry deleted from font path.
[ 18.216] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 18.216] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.216] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.216] (II) Module ABI versions:
[ 18.216] X.Org ANSI C Emulation: 0.4
[ 18.216] X.Org Video Driver: 25.2
[ 18.216] X.Org XInput driver : 24.4
[ 18.216] X.Org Server Extension : 10.0
[ 18.217] (++) using VT number 2
[ 18.217] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 18.217] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.217] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 18.217] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.217] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 18.225] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.225] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.225] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 18.556] (--) PCI: (0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 18.556] (--) PCI:*(1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 18.556] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.556] (II) LoadModule: "glx"
[ 18.557] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.561] (II) Module glx: vendor="X.Org Foundation"
[ 18.561] compiled for 1.21.1.8, module version = 1.0.0
[ 18.561] ABI class: X.Org Server Extension, version 10.0
[ 18.561] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.561] loading driver: nvidia
[ 18.561] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.561] loading driver: nvidia
[ 18.561] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 18.561] loading driver: modesetting
[ 18.561] (==) Matched nvidia as autoconfigured driver 0
[ 18.561] (==) Matched nouveau as autoconfigured driver 1
[ 18.561] (==) Matched nv as autoconfigured driver 2
[ 18.561] (==) Matched modesetting as autoconfigured driver 3
[ 18.561] (==) Matched intel as autoconfigured driver 4
[ 18.561] (==) Matched fbdev as autoconfigured driver 5
[ 18.561] (==) Matched vesa as autoconfigured driver 6
[ 18.561] (==) Assigned the driver to the xf86ConfigLayout
[ 18.561] (II) LoadModule: "nvidia"
[ 18.561] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.565] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.565] compiled for 1.6.99.901, module version = 1.0.0
[ 18.565] Module class: X.Org Video Driver
[ 18.565] (II) LoadModule: "nouveau"
[ 18.565] (WW) Warning, couldn't open module nouveau
[ 18.565] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.565] (II) LoadModule: "nv"
[ 18.565] (WW) Warning, couldn't open module nv
[ 18.565] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.565] (II) LoadModule: "modesetting"
[ 18.565] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.567] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.567] compiled for 1.21.1.8, module version = 1.21.1
[ 18.568] Module class: X.Org Video Driver
[ 18.568] ABI class: X.Org Video Driver, version 25.2
[ 18.568] (II) LoadModule: "intel"
[ 18.568] (WW) Warning, couldn't open module intel
[ 18.568] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.568] (II) LoadModule: "fbdev"
[ 18.568] (WW) Warning, couldn't open module fbdev
[ 18.568] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.568] (II) LoadModule: "vesa"
[ 18.568] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.568] (II) Module vesa: vendor="X.Org Foundation"
[ 18.568] compiled for 1.21.1.4, module version = 2.6.0
[ 18.568] Module class: X.Org Video Driver
[ 18.568] ABI class: X.Org Video Driver, version 25.2
[ 18.568] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 18.568] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.568] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.568] (II) VESA: driver for VESA chipsets: vesa
[ 18.573] (II) Loading sub module "fb"
[ 18.573] (II) LoadModule: "fb"
[ 18.573] (II) Module "fb" already built-in
[ 18.573] (II) Loading sub module "wfb"
[ 18.573] (II) LoadModule: "wfb"
[ 18.573] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.574] (II) Module wfb: vendor="X.Org Foundation"
[ 18.574] compiled for 1.21.1.8, module version = 1.0.0
[ 18.574] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.574] (WW) Falling back to old probe method for modesetting
[ 18.578] (II) modeset(G0): using drv /dev/dri/card1
[ 18.578] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.578] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.578] (==) NVIDIA(0): RGB weight 888
[ 18.578] (==) NVIDIA(0): Default visual is TrueColor
[ 18.578] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.578] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 18.578] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 18.578] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 18.579] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.579] (II) Loading sub module "glxserver_nvidia"
[ 18.579] (II) LoadModule: "glxserver_nvidia"
[ 18.579] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 18.605] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 18.605] compiled for 1.6.99.901, module version = 1.0.0
[ 18.605] Module class: X.Org Server Extension
[ 18.605] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 18.605] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 19.544] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3050 Laptop GPU (GA107-A) at
[ 19.544] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 19.544] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 19.544] (--) NVIDIA(0): VideoBIOS: 94.07.66.00.5d
[ 19.544] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.544] (II) NVIDIA(0): Validated MetaModes:
[ 19.544] (II) NVIDIA(0): "NULL"
[ 19.544] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 19.544] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 19.544] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 19.544] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 19.544] (==) modeset(G0): RGB weight 888
[ 19.544] (==) modeset(G0): Default visual is TrueColor
[ 19.544] (II) Loading sub module "glamoregl"
[ 19.545] (II) LoadModule: "glamoregl"
[ 19.545] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 19.550] (II) Module glamoregl: vendor="X.Org Foundation"
[ 19.550] compiled for 1.21.1.8, module version = 1.0.1
[ 19.550] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.049] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 20.049] (II) modeset(G0): glamor initialized
[ 20.052] (II) modeset(G0): Output eDP-1-1 using monitor section eDP-1-1
[ 20.052] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 20.053] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 20.054] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 20.056] (II) modeset(G0): EDID for output eDP-1-1
[ 20.056] (II) modeset(G0): Manufacturer: BOE Model: 823 Serial#: 0
[ 20.056] (II) modeset(G0): Year: 2018 Week: 1
[ 20.056] (II) modeset(G0): EDID Version: 1.4
[ 20.056] (II) modeset(G0): Digital Display Input
[ 20.056] (II) modeset(G0): 8 bits per channel
[ 20.056] (II) modeset(G0): Digital interface is DisplayPort
[ 20.056] (II) modeset(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 20.056] (II) modeset(G0): Gamma: 2.20
[ 20.056] (II) modeset(G0): No DPMS capabilities specified
[ 20.056] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 20.056] (II) modeset(G0): First detailed timing is preferred mode
[ 20.056] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 20.056] (II) modeset(G0): Display is continuous-frequency
[ 20.056] (II) modeset(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 20.056] (II) modeset(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 20.056] (II) modeset(G0): Manufacturer's mask: 0
[ 20.056] (II) modeset(G0): Supported detailed timing:
[ 20.056] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 20.056] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 20.056] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 20.056] (II) modeset(G0): Supported detailed timing:
[ 20.056] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 20.056] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 20.056] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 20.056] (II) modeset(G0): Unknown vendor-specific block 2
[ 20.056] (II) modeset(G0): EDID (in hex):
[ 20.056] (II) modeset(G0): 00ffffffffffff0009e5230800000000
[ 20.056] (II) modeset(G0): 011c0104a526157803de50a3544c9926
[ 20.056] (II) modeset(G0): 0f505400000001010101010101010101
[ 20.056] (II) modeset(G0): 010101010101188d801871383c406c30
[ 20.056] (II) modeset(G0): aa007ed71000001a188d801871387846
[ 20.056] (II) modeset(G0): 6c30aa007ed71000001a000000000000
[ 20.056] (II) modeset(G0): 00000000000000000000000000000002
[ 20.056] (II) modeset(G0): 000932ff0a3c962f1b439600000000b2
[ 20.056] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 20.056] (II) modeset(G0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 20.056] (II) modeset(G0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 20.056] (II) modeset(G0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 20.056] (II) modeset(G0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x480x170.2"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.057] (II) modeset(G0): Modeline "640x480x120.0"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.057] (II) modeset(G0): Modeline "640x480x85.0"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.057] (II) modeset(G0): Modeline "640x480x72.8"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.057] (II) modeset(G0): Modeline "640x480x75.0"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.057] (II) modeset(G0): Modeline "640x480x59.9"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.057] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 20.057] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 20.057] (II) modeset(G0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 20.057] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 20.057] (II) modeset(G0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 20.057] (II) modeset(G0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 20.057] (II) modeset(G0): EDID for output HDMI-1-1
[ 20.057] (II) modeset(G0): EDID for output DP-1-1
[ 20.057] (II) modeset(G0): EDID for output HDMI-1-2
[ 20.057] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.057] (==) modeset(G0): DPI set to (96, 96)
[ 20.057] (II) Loading sub module "fb"
[ 20.057] (II) LoadModule: "fb"
[ 20.057] (II) Module "fb" already built-in
[ 20.057] (II) UnloadModule: "vesa"
[ 20.057] (II) Unloading vesa
[ 20.057] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 20.057] (II) NVIDIA: access.
[ 20.064] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 20.064] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 20.064] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 20.064] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 20.064] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 20.064] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 20.064] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 20.064] (II) NVIDIA(0): Config Options in the README.
[ 20.075] (II) NVIDIA(0): Setting mode "NULL"
[ 20.078] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.078] (==) NVIDIA(0): Backing store enabled
[ 20.078] (==) NVIDIA(0): Silken mouse enabled
[ 20.078] (==) NVIDIA(0): DPMS enabled
[ 20.078] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 20.078] (II) Loading sub module "dri2"
[ 20.078] (II) LoadModule: "dri2"
[ 20.078] (II) Module "dri2" already built-in
[ 20.078] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.078] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.090] (==) modeset(G0): Backing store enabled
[ 20.090] (==) modeset(G0): Silken mouse enabled
[ 20.121] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 20.121] (==) modeset(G0): DPMS enabled
[ 20.121] (II) modeset(G0): [DRI2] Setup complete
[ 20.121] (II) modeset(G0): [DRI2] DRI driver: iris
[ 20.121] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 20.121] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 20.121] (II) Initializing extension Generic Event Extension
[ 20.121] (II) Initializing extension SHAPE
[ 20.122] (II) Initializing extension MIT-SHM
[ 20.122] (II) Initializing extension XInputExtension
[ 20.122] (II) Initializing extension XTEST
[ 20.122] (II) Initializing extension BIG-REQUESTS
[ 20.123] (II) Initializing extension SYNC
[ 20.123] (II) Initializing extension XKEYBOARD
[ 20.123] (II) Initializing extension XC-MISC
[ 20.123] (II) Initializing extension SECURITY
[ 20.123] (II) Initializing extension XFIXES
[ 20.124] (II) Initializing extension RENDER
[ 20.124] (II) Initializing extension RANDR
[ 20.124] (II) Initializing extension COMPOSITE
[ 20.124] (II) Initializing extension DAMAGE
[ 20.125] (II) Initializing extension MIT-SCREEN-SAVER
[ 20.125] (II) Initializing extension DOUBLE-BUFFER
[ 20.125] (II) Initializing extension RECORD
[ 20.125] (II) Initializing extension DPMS
[ 20.125] (II) Initializing extension Present
[ 20.125] (II) Initializing extension DRI3
[ 20.126] (II) Initializing extension X-Resource
[ 20.126] (II) Initializing extension XVideo
[ 20.126] (II) Initializing extension XVideo-MotionCompensation
[ 20.126] (II) Initializing extension GLX
[ 20.126] (II) Initializing extension GLX
[ 20.126] (II) Indirect GLX disabled.
[ 20.126] (II) GLX: Another vendor is already registered for screen 0
[ 20.126] (II) Initializing extension XFree86-VidModeExtension
[ 20.127] (II) Initializing extension XFree86-DGA
[ 20.127] (II) Initializing extension XFree86-DRI
[ 20.127] (II) Initializing extension DRI2
[ 20.127] (II) Initializing extension NV-GLX
[ 20.127] (II) Initializing extension NV-CONTROL
[ 20.907] (II) modeset(G0): Damage tracking initialized
[ 20.971] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 20.971] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 20.971] (**) Power Button: Applying InputClass "system-keyboard"
[ 20.971] (II) LoadModule: "libinput"
[ 20.971] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 20.973] (II) Module libinput: vendor="X.Org Foundation"
[ 20.973] compiled for 1.21.1.8, module version = 1.3.0
[ 20.973] Module class: X.Org XInput Driver
[ 20.973] ABI class: X.Org XInput driver, version 24.4
[ 20.973] (II) Using input driver 'libinput' for 'Power Button'
[ 20.973] (**) Power Button: always reports core events
[ 20.973] (**) Option "Device" "/dev/input/event3"
[ 20.975] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 20.975] (II) event3 - Power Button: device is a keyboard
[ 20.975] (II) event3 - Power Button: device removed
[ 21.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.000] (**) Option "xkb_layout" "us"
[ 21.000] (**) Option "xkb_variant" "altgr-intl"
[ 21.014] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.014] (II) event3 - Power Button: device is a keyboard
[ 21.014] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 21.014] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 21.014] (**) Video Bus: Applying InputClass "system-keyboard"
[ 21.014] (II) Using input driver 'libinput' for 'Video Bus'
[ 21.014] (**) Video Bus: always reports core events
[ 21.014] (**) Option "Device" "/dev/input/event13"
[ 21.014] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 21.014] (II) event13 - Video Bus: device is a keyboard
[ 21.015] (II) event13 - Video Bus: device removed
[ 21.073] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18/event13"
[ 21.073] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.073] (**) Option "xkb_layout" "us"
[ 21.073] (**) Option "xkb_variant" "altgr-intl"
[ 21.074] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 21.075] (II) event13 - Video Bus: device is a keyboard
[ 21.075] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.075] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.075] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.075] (II) Using input driver 'libinput' for 'Power Button'
[ 21.075] (**) Power Button: always reports core events
[ 21.075] (**) Option "Device" "/dev/input/event0"
[ 21.076] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.076] (II) event0 - Power Button: device is a keyboard
[ 21.077] (II) event0 - Power Button: device removed
[ 21.103] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 21.103] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.103] (**) Option "xkb_layout" "us"
[ 21.103] (**) Option "xkb_variant" "altgr-intl"
[ 21.104] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.104] (II) event0 - Power Button: device is a keyboard
[ 21.105] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 21.105] (II) No input driver specified, ignoring this device.
[ 21.105] (II) This device may have been added with another device file.
[ 21.106] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 21.106] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 21.106] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.106] (II) Using input driver 'libinput' for 'Sleep Button'
[ 21.106] (**) Sleep Button: always reports core events
[ 21.106] (**) Option "Device" "/dev/input/event1"
[ 21.107] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.107] (II) event1 - Sleep Button: device is a keyboard
[ 21.107] (II) event1 - Sleep Button: device removed
[ 21.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 21.130] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.130] (**) Option "xkb_layout" "us"
[ 21.130] (**) Option "xkb_variant" "altgr-intl"
[ 21.131] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.131] (II) event1 - Sleep Button: device is a keyboard
[ 21.132] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event9)
[ 21.132] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 21.132] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 21.132] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 21.132] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 21.132] (**) Option "Device" "/dev/input/event9"
[ 21.134] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 21.134] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 21.134] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 21.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input14/event9"
[ 21.196] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 21.196] (**) Option "xkb_layout" "us"
[ 21.196] (**) Option "xkb_variant" "altgr-intl"
[ 21.197] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 21.197] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 21.197] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 21.197] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 21.197] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 21.197] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 21.197] (**) Option "Device" "/dev/input/event5"
[ 21.255] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 21.255] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 21.256] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 21.286] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.286] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.286] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 21.286] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 21.287] (**) Option "AccelerationScheme" "none"
[ 21.287] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 21.287] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 21.287] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 21.345] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 21.345] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 21.346] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 21.346] (II) No input driver specified, ignoring this device.
[ 21.346] (II) This device may have been added with another device file.
[ 21.347] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event10)
[ 21.347] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 21.347] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 21.347] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 21.347] (**) Option "Device" "/dev/input/event10"
[ 21.348] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.349] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 21.349] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 21.396] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.396] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.396] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input15/event10"
[ 21.396] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 21.396] (**) Option "AccelerationScheme" "none"
[ 21.396] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 21.396] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 21.396] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 21.398] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.399] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 21.400] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 21.400] (II) No input driver specified, ignoring this device.
[ 21.400] (II) This device may have been added with another device file.
[ 21.401] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event11)
[ 21.401] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 21.401] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 21.401] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 21.401] (**) Option "Device" "/dev/input/event11"
[ 21.402] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 21.404] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 21.404] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 21.453] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.453] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.453] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input16/event11"
[ 21.454] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 21.456] (**) Option "AccelerationScheme" "none"
[ 21.456] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 21.456] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 21.456] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 21.457] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 21.458] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 21.459] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 21.459] (II) No input driver specified, ignoring this device.
[ 21.459] (II) This device may have been added with another device file.
[ 21.459] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 21.459] (II) No input driver specified, ignoring this device.
[ 21.459] (II) This device may have been added with another device file.
[ 21.459] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 21.459] (II) No input driver specified, ignoring this device.
[ 21.459] (II) This device may have been added with another device file.
[ 21.459] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 21.459] (II) No input driver specified, ignoring this device.
[ 21.459] (II) This device may have been added with another device file.
[ 21.459] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 21.459] (II) No input driver specified, ignoring this device.
[ 21.459] (II) This device may have been added with another device file.
[ 21.459] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 21.459] (II) No input driver specified, ignoring this device.
[ 21.459] (II) This device may have been added with another device file.
[ 21.460] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 21.460] (II) No input driver specified, ignoring this device.
[ 21.460] (II) This device may have been added with another device file.
[ 21.460] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 21.460] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 21.460] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 21.460] (II) Using input driver 'libinput' for 'Intel HID events'
[ 21.460] (**) Intel HID events: always reports core events
[ 21.460] (**) Option "Device" "/dev/input/event7"
[ 21.460] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.460] (II) event7 - Intel HID events: device is a keyboard
[ 21.460] (II) event7 - Intel HID events: device removed
[ 21.480] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input8/event7"
[ 21.480] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 21.480] (**) Option "xkb_layout" "us"
[ 21.480] (**) Option "xkb_variant" "altgr-intl"
[ 21.481] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.481] (II) event7 - Intel HID events: device is a keyboard
[ 21.482] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 21.482] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.482] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.482] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.482] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.482] (**) Option "Device" "/dev/input/event4"
[ 21.483] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.483] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.485] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 21.506] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 21.506] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 21.506] (**) Option "xkb_layout" "us"
[ 21.506] (**) Option "xkb_variant" "altgr-intl"
[ 21.508] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.508] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.510] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 21.510] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 21.510] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 21.510] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 21.510] (**) Option "Device" "/dev/input/event12"
[ 21.511] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.511] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.512] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 21.550] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.550] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.550] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.550] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event12"
[ 21.550] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 21.550] (**) Option "AccelerationScheme" "none"
[ 21.550] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 21.550] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 21.550] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 21.551] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.552] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.553] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 21.553] (II) No input driver specified, ignoring this device.
[ 21.553] (II) This device may have been added with another device file.
[ 21.553] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 21.553] (II) No input driver specified, ignoring this device.
[ 21.553] (II) This device may have been added with another device file.
[ 21.555] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event6)
[ 21.555] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.555] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 21.555] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 21.555] (**) TUXEDO Keyboard: always reports core events
[ 21.555] (**) Option "Device" "/dev/input/event6"
[ 21.555] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 21.555] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 21.556] (II) event6 - TUXEDO Keyboard: device removed
[ 21.596] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input7/event6"
[ 21.596] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 21.596] (**) Option "xkb_layout" "us"
[ 21.596] (**) Option "xkb_variant" "altgr-intl"
[ 21.598] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 21.598] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 21.630] randr: falling back to unsynchronized pixmap sharing
[ 25.038] (EE) event11 - FTCS1000:01 2808:0102 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[ 26.531] (EE) event11 - FTCS1000:01 2808:0102 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[ 26.580] (EE) event11 - FTCS1000:01 2808:0102 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[ 27.194] (EE) event11 - FTCS1000:01 2808:0102 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[ 30.870] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 60.439] (EE) modeset(G0): failed to set mode: No such file or directory
[ 85.017] (II) event3 - Power Button: device removed
[ 85.053] (II) event13 - Video Bus: device removed
[ 85.100] (II) event0 - Power Button: device removed
[ 85.133] (II) event1 - Sleep Button: device removed
[ 85.163] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 85.216] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 85.266] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 85.310] (II) event7 - Intel HID events: device removed
[ 85.340] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 85.370] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 85.403] (II) event6 - TUXEDO Keyboard: device removed
[ 85.504] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 85.506] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 86.052] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 366 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.052] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 366 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.052] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 366 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.052] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 353 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 353 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 344 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 344 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 344 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 355 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 355 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 355 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.053] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[ 86.062] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[ 114.282] (II) NVIDIA(0): Setting mode "NULL"
[ 114.297] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 114.297] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 114.297] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 114.297] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 114.297] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 114.297] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 114.297] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 114.297] (II) NVIDIA(0): Config Options in the README.
[ 114.324] (EE) modeset(G0): failed to set mode: No such file or directory
[ 114.324] (WW) modeset(G0): Failed to set the desired mode on connector eDP-1-1
[ 115.953] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 115.953] (II) event3 - Power Button: device is a keyboard
[ 115.954] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 115.954] (II) event13 - Video Bus: device is a keyboard
[ 115.954] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 115.954] (II) event0 - Power Button: device is a keyboard
[ 115.955] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 115.955] (II) event1 - Sleep Button: device is a keyboard
[ 115.955] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 115.955] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 116.013] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 116.013] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 116.015] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 116.016] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 116.018] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 116.018] (II) event7 - Intel HID events: device is a keyboard
[ 116.020] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 116.020] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 116.022] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 116.022] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 116.023] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 116.023] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 116.024] (II) event11 - FTCS1000:01 2808:0102 Touchpad: SYN_DROPPED event - some input events have been lost.
[ 116.030] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 117.740] (II) event3 - Power Button: device removed
[ 117.766] (II) event13 - Video Bus: device removed
[ 117.810] (II) event0 - Power Button: device removed
[ 117.826] (II) event1 - Sleep Button: device removed
[ 117.843] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 117.880] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 117.936] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 117.970] (II) event7 - Intel HID events: device removed
[ 117.986] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 118.016] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 118.060] (II) event6 - TUXEDO Keyboard: device removed
[ 118.394] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 118.396] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 118.970] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 366 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 366 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 366 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 353 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 353 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 344 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 344 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 344 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 355 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 355 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 355 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: ImPS/2 Generic Wheel Mouse: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.970] (II) libinput: FTCS1000:01 2808:0102 Mouse: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[ 118.980] (II) libinput: PixArt HP Travel USB Optical Mouse: SetProperty on 358 called but device is disabled.
This driver cannot change properties on a disabled device
[ 131.108] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.191] (II) UnloadModule: "libinput"
[ 131.195] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 131.196] (II) Server terminated successfully (0). Closing log file.
/var/log/Xorg.0.log
[ 18.572] (--) Log file renamed from "/var/log/Xorg.pid-1167.log" to "/var/log/Xorg.0.log"
[ 18.573]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 18.573] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 18.573] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=2f51c3fe-cfe9-4f35-9a30-b380ac14f41a rw zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=a520b9f2-08a5-4991-946f-e67df9a9b071:archlinux quiet loglevel=3 audit=0
[ 18.573]
[ 18.573] Current version of pixman: 0.42.2
[ 18.573] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.573] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.573] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 27 00:04:30 2023
[ 18.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.574] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.575] (==) No Layout section. Using the first Screen section.
[ 18.575] (==) No screen section available. Using defaults.
[ 18.575] (**) |-->Screen "Default Screen Section" (0)
[ 18.575] (**) | |-->Monitor "<default monitor>"
[ 18.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.575] (==) Automatically adding devices
[ 18.575] (==) Automatically enabling devices
[ 18.575] (==) Automatically adding GPU devices
[ 18.575] (==) Automatically binding GPU devices
[ 18.575] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.575] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 18.575] Entry deleted from font path.
[ 18.576] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 18.576] Entry deleted from font path.
[ 18.576] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 18.576] Entry deleted from font path.
[ 18.577] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 18.577] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.577] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.577] (II) Module ABI versions:
[ 18.577] X.Org ANSI C Emulation: 0.4
[ 18.577] X.Org Video Driver: 25.2
[ 18.577] X.Org XInput driver : 24.4
[ 18.577] X.Org Server Extension : 10.0
[ 18.577] (++) using VT number 2
[ 18.577] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 18.578] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.578] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 18.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.578] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 18.584] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.584] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.584] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 18.916] (--) PCI: (0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 18.916] (--) PCI:*(1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 18.916] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.916] (II) LoadModule: "glx"
[ 18.917] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.921] (II) Module glx: vendor="X.Org Foundation"
[ 18.921] compiled for 1.21.1.8, module version = 1.0.0
[ 18.921] ABI class: X.Org Server Extension, version 10.0
[ 18.921] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.921] loading driver: nvidia
[ 18.921] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.921] loading driver: nvidia
[ 18.921] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 18.921] loading driver: modesetting
[ 18.921] (==) Matched nvidia as autoconfigured driver 0
[ 18.921] (==) Matched nouveau as autoconfigured driver 1
[ 18.921] (==) Matched nv as autoconfigured driver 2
[ 18.921] (==) Matched modesetting as autoconfigured driver 3
[ 18.921] (==) Matched intel as autoconfigured driver 4
[ 18.921] (==) Matched fbdev as autoconfigured driver 5
[ 18.921] (==) Matched vesa as autoconfigured driver 6
[ 18.921] (==) Assigned the driver to the xf86ConfigLayout
[ 18.921] (II) LoadModule: "nvidia"
[ 18.921] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.925] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.925] compiled for 1.6.99.901, module version = 1.0.0
[ 18.925] Module class: X.Org Video Driver
[ 18.925] (II) LoadModule: "nouveau"
[ 18.925] (WW) Warning, couldn't open module nouveau
[ 18.925] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.925] (II) LoadModule: "nv"
[ 18.925] (WW) Warning, couldn't open module nv
[ 18.925] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.925] (II) LoadModule: "modesetting"
[ 18.925] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.927] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.927] compiled for 1.21.1.8, module version = 1.21.1
[ 18.927] Module class: X.Org Video Driver
[ 18.927] ABI class: X.Org Video Driver, version 25.2
[ 18.927] (II) LoadModule: "intel"
[ 18.927] (WW) Warning, couldn't open module intel
[ 18.927] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.927] (II) LoadModule: "fbdev"
[ 18.928] (WW) Warning, couldn't open module fbdev
[ 18.928] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.928] (II) LoadModule: "vesa"
[ 18.928] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.928] (II) Module vesa: vendor="X.Org Foundation"
[ 18.928] compiled for 1.21.1.4, module version = 2.6.0
[ 18.928] Module class: X.Org Video Driver
[ 18.928] ABI class: X.Org Video Driver, version 25.2
[ 18.928] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 18.928] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.928] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.928] (II) VESA: driver for VESA chipsets: vesa
[ 18.931] (II) Loading sub module "fb"
[ 18.931] (II) LoadModule: "fb"
[ 18.931] (II) Module "fb" already built-in
[ 18.931] (II) Loading sub module "wfb"
[ 18.931] (II) LoadModule: "wfb"
[ 18.932] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.932] (II) Module wfb: vendor="X.Org Foundation"
[ 18.932] compiled for 1.21.1.8, module version = 1.0.0
[ 18.932] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.933] (WW) Falling back to old probe method for modesetting
[ 18.937] (II) modeset(G0): using drv /dev/dri/card1
[ 18.937] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.937] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.937] (==) NVIDIA(0): RGB weight 888
[ 18.937] (==) NVIDIA(0): Default visual is TrueColor
[ 18.937] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.937] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 18.937] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 18.937] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 18.937] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.937] (II) Loading sub module "glxserver_nvidia"
[ 18.937] (II) LoadModule: "glxserver_nvidia"
[ 18.937] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 18.964] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 18.964] compiled for 1.6.99.901, module version = 1.0.0
[ 18.964] Module class: X.Org Server Extension
[ 18.964] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 18.965] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 19.902] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3050 Laptop GPU (GA107-A) at
[ 19.903] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 19.903] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 19.903] (--) NVIDIA(0): VideoBIOS: 94.07.66.00.5d
[ 19.903] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.903] (II) NVIDIA(0): Validated MetaModes:
[ 19.903] (II) NVIDIA(0): "NULL"
[ 19.903] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 19.903] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 19.903] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 19.903] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 19.903] (==) modeset(G0): RGB weight 888
[ 19.903] (==) modeset(G0): Default visual is TrueColor
[ 19.903] (II) Loading sub module "glamoregl"
[ 19.903] (II) LoadModule: "glamoregl"
[ 19.903] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 19.908] (II) Module glamoregl: vendor="X.Org Foundation"
[ 19.908] compiled for 1.21.1.8, module version = 1.0.1
[ 19.908] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.412] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 20.412] (II) modeset(G0): glamor initialized
[ 20.414] (II) modeset(G0): Output eDP-1-1 using monitor section eDP-1-1
[ 20.414] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 20.416] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 20.416] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 20.419] (II) modeset(G0): EDID for output eDP-1-1
[ 20.419] (II) modeset(G0): Manufacturer: BOE Model: 823 Serial#: 0
[ 20.419] (II) modeset(G0): Year: 2018 Week: 1
[ 20.419] (II) modeset(G0): EDID Version: 1.4
[ 20.419] (II) modeset(G0): Digital Display Input
[ 20.419] (II) modeset(G0): 8 bits per channel
[ 20.419] (II) modeset(G0): Digital interface is DisplayPort
[ 20.419] (II) modeset(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 20.419] (II) modeset(G0): Gamma: 2.20
[ 20.419] (II) modeset(G0): No DPMS capabilities specified
[ 20.419] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 20.419] (II) modeset(G0): First detailed timing is preferred mode
[ 20.419] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 20.419] (II) modeset(G0): Display is continuous-frequency
[ 20.419] (II) modeset(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 20.419] (II) modeset(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 20.419] (II) modeset(G0): Manufacturer's mask: 0
[ 20.419] (II) modeset(G0): Supported detailed timing:
[ 20.419] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 20.419] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 20.419] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 20.419] (II) modeset(G0): Supported detailed timing:
[ 20.419] (II) modeset(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 20.419] (II) modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 20.419] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 20.419] (II) modeset(G0): Unknown vendor-specific block 2
[ 20.419] (II) modeset(G0): EDID (in hex):
[ 20.419] (II) modeset(G0): 00ffffffffffff0009e5230800000000
[ 20.419] (II) modeset(G0): 011c0104a526157803de50a3544c9926
[ 20.419] (II) modeset(G0): 0f505400000001010101010101010101
[ 20.419] (II) modeset(G0): 010101010101188d801871383c406c30
[ 20.419] (II) modeset(G0): aa007ed71000001a188d801871387846
[ 20.419] (II) modeset(G0): 6c30aa007ed71000001a000000000000
[ 20.419] (II) modeset(G0): 00000000000000000000000000000002
[ 20.419] (II) modeset(G0): 000932ff0a3c962f1b439600000000b2
[ 20.419] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 20.419] (II) modeset(G0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 20.419] (II) modeset(G0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 20.419] (II) modeset(G0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 20.419] (II) modeset(G0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 20.419] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "640x480x170.2"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.419] (II) modeset(G0): Modeline "640x480x120.0"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.419] (II) modeset(G0): Modeline "640x480x85.0"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.419] (II) modeset(G0): Modeline "640x480x72.8"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.419] (II) modeset(G0): Modeline "640x480x75.0"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.419] (II) modeset(G0): Modeline "640x480x59.9"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.419] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 20.419] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 20.419] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 20.419] (II) modeset(G0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 20.419] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 20.419] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 20.420] (II) modeset(G0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 20.420] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 20.420] (II) modeset(G0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 20.420] (II) modeset(G0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 20.420] (II) modeset(G0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 20.420] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 20.420] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 20.420] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 20.420] (II) modeset(G0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 20.420] (II) modeset(G0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 20.420] (II) modeset(G0): EDID for output HDMI-1-1
[ 20.420] (II) modeset(G0): EDID for output DP-1-1
[ 20.420] (II) modeset(G0): EDID for output HDMI-1-2
[ 20.420] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.420] (==) modeset(G0): DPI set to (96, 96)
[ 20.420] (II) Loading sub module "fb"
[ 20.420] (II) LoadModule: "fb"
[ 20.420] (II) Module "fb" already built-in
[ 20.420] (II) UnloadModule: "vesa"
[ 20.420] (II) Unloading vesa
[ 20.420] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 20.420] (II) NVIDIA: access.
[ 20.426] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 20.426] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 20.426] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 20.426] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 20.426] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 20.426] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 20.426] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 20.426] (II) NVIDIA(0): Config Options in the README.
[ 20.437] (II) NVIDIA(0): Setting mode "NULL"
[ 20.440] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.440] (==) NVIDIA(0): Backing store enabled
[ 20.440] (==) NVIDIA(0): Silken mouse enabled
[ 20.440] (==) NVIDIA(0): DPMS enabled
[ 20.440] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 20.440] (II) Loading sub module "dri2"
[ 20.440] (II) LoadModule: "dri2"
[ 20.440] (II) Module "dri2" already built-in
[ 20.440] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.440] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.453] (==) modeset(G0): Backing store enabled
[ 20.453] (==) modeset(G0): Silken mouse enabled
[ 20.486] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 20.486] (==) modeset(G0): DPMS enabled
[ 20.486] (II) modeset(G0): [DRI2] Setup complete
[ 20.486] (II) modeset(G0): [DRI2] DRI driver: iris
[ 20.486] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 20.486] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 20.486] (II) Initializing extension Generic Event Extension
[ 20.487] (II) Initializing extension SHAPE
[ 20.487] (II) Initializing extension MIT-SHM
[ 20.487] (II) Initializing extension XInputExtension
[ 20.487] (II) Initializing extension XTEST
[ 20.488] (II) Initializing extension BIG-REQUESTS
[ 20.488] (II) Initializing extension SYNC
[ 20.488] (II) Initializing extension XKEYBOARD
[ 20.488] (II) Initializing extension XC-MISC
[ 20.488] (II) Initializing extension SECURITY
[ 20.489] (II) Initializing extension XFIXES
[ 20.489] (II) Initializing extension RENDER
[ 20.489] (II) Initializing extension RANDR
[ 20.489] (II) Initializing extension COMPOSITE
[ 20.489] (II) Initializing extension DAMAGE
[ 20.490] (II) Initializing extension MIT-SCREEN-SAVER
[ 20.490] (II) Initializing extension DOUBLE-BUFFER
[ 20.490] (II) Initializing extension RECORD
[ 20.490] (II) Initializing extension DPMS
[ 20.490] (II) Initializing extension Present
[ 20.490] (II) Initializing extension DRI3
[ 20.490] (II) Initializing extension X-Resource
[ 20.491] (II) Initializing extension XVideo
[ 20.491] (II) Initializing extension XVideo-MotionCompensation
[ 20.491] (II) Initializing extension GLX
[ 20.491] (II) Initializing extension GLX
[ 20.491] (II) Indirect GLX disabled.
[ 20.491] (II) GLX: Another vendor is already registered for screen 0
[ 20.491] (II) Initializing extension XFree86-VidModeExtension
[ 20.491] (II) Initializing extension XFree86-DGA
[ 20.491] (II) Initializing extension XFree86-DRI
[ 20.491] (II) Initializing extension DRI2
[ 20.491] (II) Initializing extension NV-GLX
[ 20.491] (II) Initializing extension NV-CONTROL
[ 21.284] (II) modeset(G0): Damage tracking initialized
[ 21.349] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.349] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.349] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.349] (II) LoadModule: "libinput"
[ 21.349] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.351] (II) Module libinput: vendor="X.Org Foundation"
[ 21.352] compiled for 1.21.1.8, module version = 1.3.0
[ 21.352] Module class: X.Org XInput Driver
[ 21.352] ABI class: X.Org XInput driver, version 24.4
[ 21.352] (II) Using input driver 'libinput' for 'Power Button'
[ 21.352] (**) Power Button: always reports core events
[ 21.352] (**) Option "Device" "/dev/input/event3"
[ 21.353] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.353] (II) event3 - Power Button: device is a keyboard
[ 21.353] (II) event3 - Power Button: device removed
[ 21.393] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.393] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.393] (**) Option "xkb_layout" "us"
[ 21.393] (**) Option "xkb_variant" "altgr-intl"
[ 21.412] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.412] (II) event3 - Power Button: device is a keyboard
[ 21.413] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 21.413] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 21.413] (**) Video Bus: Applying InputClass "system-keyboard"
[ 21.413] (II) Using input driver 'libinput' for 'Video Bus'
[ 21.413] (**) Video Bus: always reports core events
[ 21.413] (**) Option "Device" "/dev/input/event13"
[ 21.413] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 21.413] (II) event13 - Video Bus: device is a keyboard
[ 21.413] (II) event13 - Video Bus: device removed
[ 21.473] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18/event13"
[ 21.473] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.473] (**) Option "xkb_layout" "us"
[ 21.473] (**) Option "xkb_variant" "altgr-intl"
[ 21.475] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 21.475] (II) event13 - Video Bus: device is a keyboard
[ 21.476] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.476] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.476] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.476] (II) Using input driver 'libinput' for 'Power Button'
[ 21.476] (**) Power Button: always reports core events
[ 21.476] (**) Option "Device" "/dev/input/event0"
[ 21.477] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.477] (II) event0 - Power Button: device is a keyboard
[ 21.477] (II) event0 - Power Button: device removed
[ 21.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 21.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.520] (**) Option "xkb_layout" "us"
[ 21.520] (**) Option "xkb_variant" "altgr-intl"
[ 21.521] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.521] (II) event0 - Power Button: device is a keyboard
[ 21.522] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 21.522] (II) No input driver specified, ignoring this device.
[ 21.522] (II) This device may have been added with another device file.
[ 21.523] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 21.523] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 21.523] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.523] (II) Using input driver 'libinput' for 'Sleep Button'
[ 21.523] (**) Sleep Button: always reports core events
[ 21.523] (**) Option "Device" "/dev/input/event1"
[ 21.524] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.524] (II) event1 - Sleep Button: device is a keyboard
[ 21.524] (II) event1 - Sleep Button: device removed
[ 21.550] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 21.550] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.550] (**) Option "xkb_layout" "us"
[ 21.550] (**) Option "xkb_variant" "altgr-intl"
[ 21.551] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.551] (II) event1 - Sleep Button: device is a keyboard
[ 21.553] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event9)
[ 21.553] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 21.553] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 21.553] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 21.553] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 21.553] (**) Option "Device" "/dev/input/event9"
[ 21.554] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 21.554] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 21.554] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 21.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input14/event9"
[ 21.620] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 21.620] (**) Option "xkb_layout" "us"
[ 21.620] (**) Option "xkb_variant" "altgr-intl"
[ 21.622] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 21.622] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 21.624] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 21.624] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 21.624] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 21.624] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 21.624] (**) Option "Device" "/dev/input/event5"
[ 21.682] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 21.682] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 21.682] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 21.720] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.720] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.720] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 21.720] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 21.720] (**) Option "AccelerationScheme" "none"
[ 21.720] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 21.720] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 21.720] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 21.778] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 21.779] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 21.780] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 21.780] (II) No input driver specified, ignoring this device.
[ 21.780] (II) This device may have been added with another device file.
[ 21.781] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event10)
[ 21.781] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 21.781] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 21.781] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 21.781] (**) Option "Device" "/dev/input/event10"
[ 21.782] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.782] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 21.782] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 21.843] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.843] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.843] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input15/event10"
[ 21.843] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 21.843] (**) Option "AccelerationScheme" "none"
[ 21.843] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 21.843] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 21.843] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 21.845] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.845] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 21.847] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 21.847] (II) No input driver specified, ignoring this device.
[ 21.847] (II) This device may have been added with another device file.
[ 21.847] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event11)
[ 21.847] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 21.847] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 21.847] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 21.847] (**) Option "Device" "/dev/input/event11"
[ 21.849] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 21.850] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 21.851] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 21.886] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.886] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.886] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.887] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input16/event11"
[ 21.887] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 21.889] (**) Option "AccelerationScheme" "none"
[ 21.889] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 21.889] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 21.889] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 21.891] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 21.892] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 21.892] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 21.892] (II) No input driver specified, ignoring this device.
[ 21.892] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 21.893] (II) No input driver specified, ignoring this device.
[ 21.893] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 21.893] (II) No input driver specified, ignoring this device.
[ 21.893] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 21.893] (II) No input driver specified, ignoring this device.
[ 21.893] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 21.893] (II) No input driver specified, ignoring this device.
[ 21.893] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 21.893] (II) No input driver specified, ignoring this device.
[ 21.893] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 21.893] (II) No input driver specified, ignoring this device.
[ 21.893] (II) This device may have been added with another device file.
[ 21.893] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 21.893] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 21.893] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 21.893] (II) Using input driver 'libinput' for 'Intel HID events'
[ 21.893] (**) Intel HID events: always reports core events
[ 21.893] (**) Option "Device" "/dev/input/event7"
[ 21.894] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.894] (II) event7 - Intel HID events: device is a keyboard
[ 21.894] (II) event7 - Intel HID events: device removed
[ 21.913] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input8/event7"
[ 21.913] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 21.913] (**) Option "xkb_layout" "us"
[ 21.913] (**) Option "xkb_variant" "altgr-intl"
[ 21.915] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.915] (II) event7 - Intel HID events: device is a keyboard
[ 21.916] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 21.916] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.916] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.916] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.916] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.916] (**) Option "Device" "/dev/input/event4"
[ 21.917] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.917] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.918] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 21.950] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 21.950] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 21.950] (**) Option "xkb_layout" "us"
[ 21.950] (**) Option "xkb_variant" "altgr-intl"
[ 21.951] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.952] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.954] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 21.954] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 21.954] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 21.954] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 21.954] (**) Option "Device" "/dev/input/event12"
[ 21.955] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.955] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.956] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 22.000] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.000] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.000] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.000] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event12"
[ 22.000] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 22.000] (**) Option "AccelerationScheme" "none"
[ 22.000] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 22.000] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 22.000] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 22.001] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 22.001] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 22.002] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 22.002] (II) No input driver specified, ignoring this device.
[ 22.003] (II) This device may have been added with another device file.
[ 22.003] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 22.003] (II) No input driver specified, ignoring this device.
[ 22.003] (II) This device may have been added with another device file.
[ 22.005] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event6)
[ 22.005] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 22.005] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 22.005] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 22.005] (**) TUXEDO Keyboard: always reports core events
[ 22.005] (**) Option "Device" "/dev/input/event6"
[ 22.005] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 22.005] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 22.006] (II) event6 - TUXEDO Keyboard: device removed
[ 22.043] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input7/event6"
[ 22.043] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 22.043] (**) Option "xkb_layout" "us"
[ 22.043] (**) Option "xkb_variant" "altgr-intl"
[ 22.044] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 22.044] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 22.076] randr: falling back to unsynchronized pixmap sharing
[ 31.114] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
Offline
Judging by a result I found when searching for modeset(G0): failed to set mode: No such file or directory, it seems this issue might have been introduced with kernel 5.16
https://gitlab.freedesktop.org/drm/intel/-/issues/5252
In the original post, it says "Workaround for Xorg : use old 'xserver-xorg-video-intel' driver instead of modesetting. No workaround for Wayland."
Is the package xf86-video-intel the Arch equivalent of xserver-xorg-video-intel? If so, how do I enable it instead of modeset after installing the package?
Offline
Is the package xf86-video-intel the Arch equivalent of xserver-xorg-video-intel?
Yes and simply installing it will normally cause its use but you'll have to adjust teh driver in your /etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf as it explicitly calls for the modesetting one (use "intel" instead)
nb. https://wiki.archlinux.org/title/Intel_ … stallation that this isn't necessarily issue-free, there're multiple recent reports of the driver causing artifacts, slowness, whatnot.
Offline
Unfortunately with xf86-video-intel I got a black screen instead of a login screen after booting, so I had to uninstall it again. Here's the xorg log from the last boot with that driver.
[ 18.263] (--) Log file renamed from "/var/log/Xorg.pid-1161.log" to "/var/log/Xorg.0.log"
[ 18.267]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 18.267] Current Operating System: Linux <redacted> 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 18.267] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=2f51c3fe-cfe9-4f35-9a30-b380ac14f41a rw zswap.enabled=0 intel_iommu=on iommu=pt vfio_pci vfio mdev acpi_enforce_resources=lax i915.enable_dc=0 intel_idle.max_cstate=2 acpi_osi=’!Windows 2015′ cryptdevice=UUID=a520b9f2-08a5-4991-946f-e67df9a9b071:archlinux quiet loglevel=3 audit=0
[ 18.267]
[ 18.267] Current version of pixman: 0.42.2
[ 18.267] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.267] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.267] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 27 11:27:39 2023
[ 18.268] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.268] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.269] (==) No Layout section. Using the first Screen section.
[ 18.269] (==) No screen section available. Using defaults.
[ 18.269] (**) |-->Screen "Default Screen Section" (0)
[ 18.269] (**) | |-->Monitor "<default monitor>"
[ 18.269] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.269] (==) Automatically adding devices
[ 18.269] (==) Automatically enabling devices
[ 18.269] (==) Automatically adding GPU devices
[ 18.269] (==) Automatically binding GPU devices
[ 18.269] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.269] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 18.269] Entry deleted from font path.
[ 18.269] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 18.269] Entry deleted from font path.
[ 18.269] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 18.269] Entry deleted from font path.
[ 18.270] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 18.270] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.270] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.270] (II) Module ABI versions:
[ 18.270] X.Org ANSI C Emulation: 0.4
[ 18.270] X.Org Video Driver: 25.2
[ 18.270] X.Org XInput driver : 24.4
[ 18.270] X.Org Server Extension : 10.0
[ 18.271] (++) using VT number 2
[ 18.271] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 18.272] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.272] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 18.272] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.272] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 18.279] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.279] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 18.279] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 18.610] (--) PCI: (0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 18.610] (--) PCI:*(1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 18.610] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.610] (II) LoadModule: "glx"
[ 18.611] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.615] (II) Module glx: vendor="X.Org Foundation"
[ 18.615] compiled for 1.21.1.8, module version = 1.0.0
[ 18.615] ABI class: X.Org Server Extension, version 10.0
[ 18.615] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.615] loading driver: nvidia
[ 18.615] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.615] loading driver: nvidia
[ 18.615] (II) Applying OutputClass "intel" to /dev/dri/card1
[ 18.615] loading driver: intel
[ 18.615] (==) Matched nvidia as autoconfigured driver 0
[ 18.615] (==) Matched nouveau as autoconfigured driver 1
[ 18.615] (==) Matched nv as autoconfigured driver 2
[ 18.615] (==) Matched intel as autoconfigured driver 3
[ 18.615] (==) Matched modesetting as autoconfigured driver 4
[ 18.615] (==) Matched fbdev as autoconfigured driver 5
[ 18.615] (==) Matched vesa as autoconfigured driver 6
[ 18.615] (==) Assigned the driver to the xf86ConfigLayout
[ 18.615] (II) LoadModule: "nvidia"
[ 18.615] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.618] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.618] compiled for 1.6.99.901, module version = 1.0.0
[ 18.618] Module class: X.Org Video Driver
[ 18.619] (II) LoadModule: "nouveau"
[ 18.619] (WW) Warning, couldn't open module nouveau
[ 18.619] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.619] (II) LoadModule: "nv"
[ 18.619] (WW) Warning, couldn't open module nv
[ 18.619] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.619] (II) LoadModule: "intel"
[ 18.619] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.620] (II) Module intel: vendor="X.Org Foundation"
[ 18.620] compiled for 1.21.1.6, module version = 2.99.917
[ 18.620] Module class: X.Org Video Driver
[ 18.620] ABI class: X.Org Video Driver, version 25.2
[ 18.620] (II) LoadModule: "modesetting"
[ 18.620] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.623] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.623] compiled for 1.21.1.8, module version = 1.21.1
[ 18.623] Module class: X.Org Video Driver
[ 18.623] ABI class: X.Org Video Driver, version 25.2
[ 18.623] (II) LoadModule: "fbdev"
[ 18.623] (WW) Warning, couldn't open module fbdev
[ 18.623] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.623] (II) LoadModule: "vesa"
[ 18.623] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.624] (II) Module vesa: vendor="X.Org Foundation"
[ 18.624] compiled for 1.21.1.4, module version = 2.6.0
[ 18.624] Module class: X.Org Video Driver
[ 18.624] ABI class: X.Org Video Driver, version 25.2
[ 18.624] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 18.624] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 18.624] (II) intel: Driver for Intel(R) HD Graphics
[ 18.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 18.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 18.624] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.624] (II) VESA: driver for VESA chipsets: vesa
[ 18.627] (II) Loading sub module "fb"
[ 18.627] (II) LoadModule: "fb"
[ 18.627] (II) Module "fb" already built-in
[ 18.627] (II) Loading sub module "wfb"
[ 18.627] (II) LoadModule: "wfb"
[ 18.627] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.628] (II) Module wfb: vendor="X.Org Foundation"
[ 18.628] compiled for 1.21.1.8, module version = 1.0.0
[ 18.628] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.628] (WW) Falling back to old probe method for modesetting
[ 18.629] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 18.629] (II) intel(G0): SNA compiled from 2.99.917-923-gb74b67f0
[ 18.629] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.629] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.629] (==) NVIDIA(0): RGB weight 888
[ 18.629] (==) NVIDIA(0): Default visual is TrueColor
[ 18.629] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.629] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 18.629] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 18.629] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 18.629] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.629] (II) Loading sub module "glxserver_nvidia"
[ 18.629] (II) LoadModule: "glxserver_nvidia"
[ 18.629] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 18.656] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 18.656] compiled for 1.6.99.901, module version = 1.0.0
[ 18.656] Module class: X.Org Server Extension
[ 18.656] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 18.657] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 19.593] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3050 Laptop GPU (GA107-A) at
[ 19.593] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 19.593] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 19.593] (--) NVIDIA(0): VideoBIOS: 94.07.66.00.5d
[ 19.593] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.593] (II) NVIDIA(0): Validated MetaModes:
[ 19.593] (II) NVIDIA(0): "NULL"
[ 19.593] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 19.593] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 19.593] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 19.594] (WW) intel(G0): Unknown chipset
[ 19.594] (--) intel(G0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 14 threads
[ 19.594] (==) intel(G0): Depth 24, (--) framebuffer bpp 32
[ 19.594] (==) intel(G0): RGB weight 888
[ 19.594] (==) intel(G0): Default visual is TrueColor
[ 19.595] (II) intel(G0): Output eDP1 has no monitor section
[ 19.595] (**) intel(G0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 19.595] (II) intel(G0): Enabled output eDP1
[ 19.595] (II) intel(G0): Output HDMI1 has no monitor section
[ 19.595] (II) intel(G0): Enabled output HDMI1
[ 19.595] (II) intel(G0): Output DP1 has no monitor section
[ 19.595] (II) intel(G0): Enabled output DP1
[ 19.595] (II) intel(G0): Output HDMI2 has no monitor section
[ 19.595] (II) intel(G0): Enabled output HDMI2
[ 19.595] (--) intel(G0): Using a maximum size of 256x256 for hardware cursors
[ 19.595] (II) intel(G0): Output VIRTUAL1 has no monitor section
[ 19.595] (II) intel(G0): Enabled output VIRTUAL1
[ 19.598] (II) intel(G0): EDID for output eDP1
[ 19.598] (II) intel(G0): Manufacturer: BOE Model: 823 Serial#: 0
[ 19.598] (II) intel(G0): Year: 2018 Week: 1
[ 19.598] (II) intel(G0): EDID Version: 1.4
[ 19.598] (II) intel(G0): Digital Display Input
[ 19.598] (II) intel(G0): 8 bits per channel
[ 19.598] (II) intel(G0): Digital interface is DisplayPort
[ 19.598] (II) intel(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 19.598] (II) intel(G0): Gamma: 2.20
[ 19.598] (II) intel(G0): No DPMS capabilities specified
[ 19.598] (II) intel(G0): Supported color encodings: RGB 4:4:4
[ 19.598] (II) intel(G0): First detailed timing is preferred mode
[ 19.598] (II) intel(G0): Preferred mode is native pixel format and refresh rate
[ 19.598] (II) intel(G0): Display is continuous-frequency
[ 19.598] (II) intel(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 19.598] (II) intel(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 19.598] (II) intel(G0): Manufacturer's mask: 0
[ 19.598] (II) intel(G0): Supported detailed timing:
[ 19.598] (II) intel(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 19.598] (II) intel(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 19.598] (II) intel(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 19.598] (II) intel(G0): Supported detailed timing:
[ 19.598] (II) intel(G0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 19.598] (II) intel(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 19.598] (II) intel(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 19.598] (II) intel(G0): Unknown vendor-specific block 2
[ 19.598] (II) intel(G0): EDID (in hex):
[ 19.598] (II) intel(G0): 00ffffffffffff0009e5230800000000
[ 19.598] (II) intel(G0): 011c0104a526157803de50a3544c9926
[ 19.598] (II) intel(G0): 0f505400000001010101010101010101
[ 19.598] (II) intel(G0): 010101010101188d801871383c406c30
[ 19.598] (II) intel(G0): aa007ed71000001a188d801871387846
[ 19.598] (II) intel(G0): 6c30aa007ed71000001a000000000000
[ 19.598] (II) intel(G0): 00000000000000000000000000000002
[ 19.598] (II) intel(G0): 000932ff0a3c962f1b439600000000b2
[ 19.598] (II) intel(G0): Printing probed modes for output eDP1
[ 19.598] (II) intel(G0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 19.598] (II) intel(G0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 19.599] (II) intel(G0): EDID for output DP1
[ 19.600] (II) intel(G0): EDID for output HDMI1
[ 19.600] (II) intel(G0): EDID for output HDMI2
[ 19.600] (II) intel(G0): EDID for output VIRTUAL1
[ 19.600] (==) intel(G0): TearFree enabled
[ 19.600] (==) intel(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.600] (==) intel(G0): DPI set to (96, 96)
[ 19.600] (II) Loading sub module "dri3"
[ 19.600] (II) LoadModule: "dri3"
[ 19.600] (II) Module "dri3" already built-in
[ 19.600] (II) Loading sub module "dri2"
[ 19.600] (II) LoadModule: "dri2"
[ 19.600] (II) Module "dri2" already built-in
[ 19.600] (II) Loading sub module "present"
[ 19.600] (II) LoadModule: "present"
[ 19.600] (II) Module "present" already built-in
[ 19.600] (II) UnloadModule: "modesetting"
[ 19.600] (II) Unloading modesetting
[ 19.600] (II) UnloadModule: "vesa"
[ 19.600] (II) Unloading vesa
[ 19.601] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 19.601] (II) NVIDIA: access.
[ 19.609] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.609] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.609] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.609] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.609] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.609] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.609] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.609] (II) NVIDIA(0): Config Options in the README.
[ 19.619] (II) NVIDIA(0): Setting mode "NULL"
[ 19.623] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.623] (==) NVIDIA(0): Backing store enabled
[ 19.623] (==) NVIDIA(0): Silken mouse enabled
[ 19.623] (==) NVIDIA(0): DPMS enabled
[ 19.623] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 19.623] (II) Loading sub module "dri2"
[ 19.623] (II) LoadModule: "dri2"
[ 19.623] (II) Module "dri2" already built-in
[ 19.623] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.623] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.623] (II) intel(G0): SNA initialized with generic backend
[ 19.623] (==) intel(G0): Backing store enabled
[ 19.623] (==) intel(G0): Silken mouse enabled
[ 19.623] (II) intel(G0): HW Cursor enabled
[ 19.623] (==) intel(G0): DPMS enabled
[ 19.623] (==) intel(G0): Display hotplug detection enabled
[ 19.623] (II) intel(G0): Textured video not supported on this hardware or backend
[ 19.624] (II) intel(G0): [DRI2] Setup complete
[ 19.624] (II) intel(G0): [DRI2] DRI driver: i965
[ 19.624] (II) intel(G0): [DRI2] VDPAU driver: va_gl
[ 19.624] (II) intel(G0): direct rendering: DRI2 DRI3 enabled
[ 19.624] (II) intel(G0): hardware support for Present enabled
[ 19.624] (II) Initializing extension Generic Event Extension
[ 19.624] (II) Initializing extension SHAPE
[ 19.624] (II) Initializing extension MIT-SHM
[ 19.624] (II) Initializing extension XInputExtension
[ 19.624] (II) Initializing extension XTEST
[ 19.624] (II) Initializing extension BIG-REQUESTS
[ 19.624] (II) Initializing extension SYNC
[ 19.624] (II) Initializing extension XKEYBOARD
[ 19.624] (II) Initializing extension XC-MISC
[ 19.624] (II) Initializing extension SECURITY
[ 19.624] (II) Initializing extension XFIXES
[ 19.624] (II) Initializing extension RENDER
[ 19.624] (II) Initializing extension RANDR
[ 19.624] (II) Initializing extension COMPOSITE
[ 19.624] (II) Initializing extension DAMAGE
[ 19.624] (II) Initializing extension MIT-SCREEN-SAVER
[ 19.625] (II) Initializing extension DOUBLE-BUFFER
[ 19.625] (II) Initializing extension RECORD
[ 19.625] (II) Initializing extension DPMS
[ 19.625] (II) Initializing extension Present
[ 19.625] (II) Initializing extension DRI3
[ 19.625] (II) Initializing extension X-Resource
[ 19.625] (II) Initializing extension XVideo
[ 19.625] (II) Initializing extension XVideo-MotionCompensation
[ 19.625] (II) Initializing extension GLX
[ 19.625] (II) Initializing extension GLX
[ 19.625] (II) Indirect GLX disabled.
[ 19.625] (II) GLX: Another vendor is already registered for screen 0
[ 19.625] (II) Initializing extension XFree86-VidModeExtension
[ 19.625] (II) Initializing extension XFree86-DGA
[ 19.625] (II) Initializing extension XFree86-DRI
[ 19.625] (II) Initializing extension DRI2
[ 19.625] (II) Initializing extension NV-GLX
[ 19.625] (II) Initializing extension NV-CONTROL
[ 19.626] (EE) intel(G0): sna_mode_shutdown_crtc: invalid state found on pipe 0, disabling CRTC:80
[ 20.515] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 20.515] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 20.515] (**) Power Button: Applying InputClass "system-keyboard"
[ 20.515] (II) LoadModule: "libinput"
[ 20.515] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 20.517] (II) Module libinput: vendor="X.Org Foundation"
[ 20.517] compiled for 1.21.1.8, module version = 1.3.0
[ 20.517] Module class: X.Org XInput Driver
[ 20.517] ABI class: X.Org XInput driver, version 24.4
[ 20.517] (II) Using input driver 'libinput' for 'Power Button'
[ 20.517] (**) Power Button: always reports core events
[ 20.517] (**) Option "Device" "/dev/input/event3"
[ 20.519] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 20.519] (II) event3 - Power Button: device is a keyboard
[ 20.519] (II) event3 - Power Button: device removed
[ 20.557] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 20.557] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 20.557] (**) Option "xkb_layout" "us"
[ 20.557] (**) Option "xkb_variant" "altgr-intl"
[ 20.573] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 20.573] (II) event3 - Power Button: device is a keyboard
[ 20.573] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 20.573] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 20.573] (**) Video Bus: Applying InputClass "system-keyboard"
[ 20.573] (II) Using input driver 'libinput' for 'Video Bus'
[ 20.574] (**) Video Bus: always reports core events
[ 20.574] (**) Option "Device" "/dev/input/event13"
[ 20.574] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 20.574] (II) event13 - Video Bus: device is a keyboard
[ 20.574] (II) event13 - Video Bus: device removed
[ 20.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21/event13"
[ 20.636] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 20.636] (**) Option "xkb_layout" "us"
[ 20.636] (**) Option "xkb_variant" "altgr-intl"
[ 20.638] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 20.638] (II) event13 - Video Bus: device is a keyboard
[ 20.639] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 20.639] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 20.639] (**) Power Button: Applying InputClass "system-keyboard"
[ 20.639] (II) Using input driver 'libinput' for 'Power Button'
[ 20.639] (**) Power Button: always reports core events
[ 20.639] (**) Option "Device" "/dev/input/event0"
[ 20.640] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 20.640] (II) event0 - Power Button: device is a keyboard
[ 20.640] (II) event0 - Power Button: device removed
[ 20.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 20.663] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 20.663] (**) Option "xkb_layout" "us"
[ 20.663] (**) Option "xkb_variant" "altgr-intl"
[ 20.664] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 20.664] (II) event0 - Power Button: device is a keyboard
[ 20.665] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 20.665] (II) No input driver specified, ignoring this device.
[ 20.665] (II) This device may have been added with another device file.
[ 20.666] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 20.666] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 20.666] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 20.666] (II) Using input driver 'libinput' for 'Sleep Button'
[ 20.666] (**) Sleep Button: always reports core events
[ 20.666] (**) Option "Device" "/dev/input/event1"
[ 20.667] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 20.667] (II) event1 - Sleep Button: device is a keyboard
[ 20.667] (II) event1 - Sleep Button: device removed
[ 20.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 20.690] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 20.690] (**) Option "xkb_layout" "us"
[ 20.690] (**) Option "xkb_variant" "altgr-intl"
[ 20.691] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 20.691] (II) event1 - Sleep Button: device is a keyboard
[ 20.693] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event9)
[ 20.693] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 20.693] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "system-keyboard"
[ 20.693] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 20.693] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 20.693] (**) Option "Device" "/dev/input/event9"
[ 20.694] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 20.694] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 20.694] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 20.743] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input17/event9"
[ 20.743] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 20.743] (**) Option "xkb_layout" "us"
[ 20.743] (**) Option "xkb_variant" "altgr-intl"
[ 20.745] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 20.745] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 20.746] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 20.746] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 20.746] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 20.746] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 20.746] (**) Option "Device" "/dev/input/event5"
[ 20.805] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 20.805] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 20.806] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 20.836] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.836] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.836] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0001/input/input6/event5"
[ 20.836] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 20.837] (**) Option "AccelerationScheme" "none"
[ 20.837] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 20.837] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 20.837] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 20.895] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 20.895] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 20.896] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 20.896] (II) No input driver specified, ignoring this device.
[ 20.896] (II) This device may have been added with another device file.
[ 20.897] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event10)
[ 20.897] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 20.897] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 20.897] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 20.897] (**) Option "Device" "/dev/input/event10"
[ 20.898] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 20.898] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 20.899] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 20.946] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.946] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.946] (II) libinput: FTCS1000:01 2808:0102 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input18/event10"
[ 20.946] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 20.947] (**) Option "AccelerationScheme" "none"
[ 20.947] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 20.947] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 20.947] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 20.948] (II) event10 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 20.949] (II) event10 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 20.951] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse1)
[ 20.951] (II) No input driver specified, ignoring this device.
[ 20.951] (II) This device may have been added with another device file.
[ 20.952] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event11)
[ 20.952] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 20.952] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 20.952] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 20.952] (**) Option "Device" "/dev/input/event11"
[ 20.953] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 20.955] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 20.955] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 20.990] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.990] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.990] (II) libinput: FTCS1000:01 2808:0102 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 20.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0002/input/input19/event11"
[ 20.990] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 20.993] (**) Option "AccelerationScheme" "none"
[ 20.993] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 20.993] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 20.993] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 20.994] (II) event11 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 20.996] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 20.997] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse2)
[ 20.997] (II) No input driver specified, ignoring this device.
[ 20.997] (II) This device may have been added with another device file.
[ 20.998] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 20.998] (II) No input driver specified, ignoring this device.
[ 20.998] (II) This device may have been added with another device file.
[ 20.998] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 20.998] (II) No input driver specified, ignoring this device.
[ 20.998] (II) This device may have been added with another device file.
[ 20.998] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 20.998] (II) No input driver specified, ignoring this device.
[ 20.998] (II) This device may have been added with another device file.
[ 20.998] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 20.998] (II) No input driver specified, ignoring this device.
[ 20.998] (II) This device may have been added with another device file.
[ 20.999] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 20.999] (II) No input driver specified, ignoring this device.
[ 20.999] (II) This device may have been added with another device file.
[ 20.999] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[ 20.999] (II) No input driver specified, ignoring this device.
[ 20.999] (II) This device may have been added with another device file.
[ 20.999] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 20.999] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 20.999] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 20.999] (II) Using input driver 'libinput' for 'Intel HID events'
[ 20.999] (**) Intel HID events: always reports core events
[ 20.999] (**) Option "Device" "/dev/input/event7"
[ 21.000] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.000] (II) event7 - Intel HID events: device is a keyboard
[ 21.000] (II) event7 - Intel HID events: device removed
[ 21.036] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input11/event7"
[ 21.036] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 21.036] (**) Option "xkb_layout" "us"
[ 21.036] (**) Option "xkb_variant" "altgr-intl"
[ 21.038] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 21.038] (II) event7 - Intel HID events: device is a keyboard
[ 21.039] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 21.039] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.039] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.039] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.039] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.039] (**) Option "Device" "/dev/input/event4"
[ 21.040] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.040] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.041] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 21.063] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 21.063] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 21.063] (**) Option "xkb_layout" "us"
[ 21.063] (**) Option "xkb_variant" "altgr-intl"
[ 21.064] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.064] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.067] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event12)
[ 21.067] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 21.067] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 21.067] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 21.067] (**) Option "Device" "/dev/input/event12"
[ 21.068] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.068] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.068] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 21.110] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.110] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.110] (II) libinput: ImPS/2 Generic Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 21.110] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event12"
[ 21.110] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 21.110] (**) Option "AccelerationScheme" "none"
[ 21.110] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 21.110] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 21.110] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 21.111] (II) event12 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 21.111] (II) event12 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 21.112] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 21.112] (II) No input driver specified, ignoring this device.
[ 21.112] (II) This device may have been added with another device file.
[ 21.113] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 21.113] (II) No input driver specified, ignoring this device.
[ 21.113] (II) This device may have been added with another device file.
[ 21.115] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event6)
[ 21.115] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.115] (**) TUXEDO Keyboard: Applying InputClass "system-keyboard"
[ 21.115] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 21.115] (**) TUXEDO Keyboard: always reports core events
[ 21.115] (**) Option "Device" "/dev/input/event6"
[ 21.116] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 21.116] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 21.116] (II) event6 - TUXEDO Keyboard: device removed
[ 21.153] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input10/event6"
[ 21.153] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 21.153] (**) Option "xkb_layout" "us"
[ 21.153] (**) Option "xkb_variant" "altgr-intl"
[ 21.154] (II) event6 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 21.154] (II) event6 - TUXEDO Keyboard: device is a keyboard
[ 21.186] randr: falling back to unsynchronized pixmap sharing
[ 21.187] (II) intel(G0): switch to mode 1920x1080@144.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21.190] (EE) intel(G0): Failed to submit rendering commands (Invalid argument), disabling acceleration.
[ 44.078] (II) event3 - Power Button: device removed
[ 44.106] (II) event13 - Video Bus: device removed
[ 44.160] (II) event0 - Power Button: device removed
[ 44.176] (II) event1 - Sleep Button: device removed
[ 44.193] (II) event9 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 44.226] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 44.270] (II) event10 - FTCS1000:01 2808:0102 Mouse: device removed
[ 44.303] (II) event11 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 44.336] (II) event7 - Intel HID events: device removed
[ 44.353] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 44.370] (II) event12 - ImPS/2 Generic Wheel Mouse: device removed
[ 44.406] (II) event6 - TUXEDO Keyboard: device removed
[ 104.378] (II) config/udev: removing device PixArt HP Travel USB Optical Mouse
[ 104.378] (II) UnloadModule: "libinput"
[ 106.077] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 106.077] (II) No input driver specified, ignoring this device.
[ 106.077] (II) This device may have been added with another device file.
[ 106.184] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 106.184] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 106.184] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 106.184] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 106.184] (**) Option "Device" "/dev/input/event5"
[ 106.245] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 106.245] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 106.246] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 106.290] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 106.290] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 106.290] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 106.290] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0003/input/input28/event5"
[ 106.290] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 106.290] (**) Option "AccelerationScheme" "none"
[ 106.290] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 106.290] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 106.290] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 166.329] (II) config/udev: removing device PixArt HP Travel USB Optical Mouse
[ 166.330] (II) UnloadModule: "libinput"
[ 168.028] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse0)
[ 168.028] (II) No input driver specified, ignoring this device.
[ 168.028] (II) This device may have been added with another device file.
[ 168.127] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event5)
[ 168.127] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 168.127] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 168.127] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 168.127] (**) Option "Device" "/dev/input/event5"
[ 168.188] (II) event5 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 168.189] (II) event5 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 168.189] (II) event5 - PixArt HP Travel USB Optical Mouse: device removed
[ 168.226] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 168.226] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 168.226] (II) libinput: PixArt HP Travel USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 168.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:03F0:1041.0004/input/input29/event5"
[ 168.226] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 168.227] (**) Option "AccelerationScheme" "none"
[ 168.227] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 168.227] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 168.227] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.444] (II) UnloadModule: "libinput"
[ 203.523] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 203.524] (II) Server terminated successfully (0). Closing log file.
Quotes from https://gitlab.freedesktop.org/drm/intel/-/issues/5252
If that mode list was automagically generated by the ddx then I'd call this a ddx bug. I think it generally works fine with a 60Hz panel, probably by pure luck more than by design. But looks like with a different refresh rate the ddx/xorg just ends up populating the mode list with bogus modes. So I'd say this needs to get fixed in xorg.
Yeah, if you add a suitable modeline by hand then it should work. gtf/cvt should be able to generate modes with arbitrary refresh rates.
We did change the kernel behaviour to actually check that we can give the user the refresh rate they requested. Previously we just ignored the requested refresh rate and effectively lied to the user that they got what they asked for when in reality what they got was some totally different refresh rate. In the future we are aiming to actually offer the user multiple refresh rates (if the panel supports it) and allow them to really choose between those. And in order to do that we can't keep ignoring the user requested refresh rate, which is why you now get an error instead.
This would explain why it's working in 5.15 (the request silently being ignored and a different refresh rate being given instead) and why it's working on the old laptop because it's got a 60Hz display, thus much less room for bogus display modes being generated in the first place.
I'm not sure why it's working on kernel 6.2 on the Kubuntu 23.04 live ISO though. Might be due to a different display/driver setup in that environment.
So we need to find a way of preventing bogus display modes from automatically being generated, or find a way of deleting the bogus display modes afterwards.
Alternatively we need to find a way of replacing the bogus modes with 60Hz instead of just adding new ones, or make 60Hz the default for the buggy resolutions so that if an application for example says "I want 640x480" it automatically gets 640x480x60 as the default first choice even if 640x480x85 is also listed as available.
Offline
By the way, the error message "modeset(G0): failed to set mode: No such file or directory" seems to indicate that it's looking for a file somewhere (since just about everything in Linux is a file). If so, do you know where in the file system these are located?
Maybe we could create a symlink for the bogus/missing mode linking to the real mode instead?
Offline
https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html
https://github.com/dvdhrm/docs/blob/815 … 2C9-L182C9
Likely just some random use of ENOENT, maybe indicating an attempt to activate a disconnected output (setting a mode on HDMI or whatever)
I'm not sure why it's working on kernel 6.2 on the Kubuntu 23.04 live ISO though. Might be due to a different display/driver setup in that environment.
Do you have an xorg log from that system as well as ideally "systool -vm i915"?
Since the previous chating attempt failed, you could check the behavior for
Section "Monitor"
Identifier "eDP-1-1"
Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection
ie. use the actual name and hope that no further modes are added.
Otherwise, next to patching the i915 module, you could try to provide a edid that explicitly adds a 640x480 mode.
https://wiki.archlinux.org/title/Kernel … s_and_EDID
https://aur.archlinux.org/packages/wxedid
Offline
Here's the xorg log from the Kubuntu live session.
[ 24.806] (--) Log file renamed from "/var/log/Xorg.pid-4185.log" to "/var/log/Xorg.0.log"
[ 24.806]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[ 24.806] Current Operating System: Linux kubuntu 6.2.0-20-generic #20-Ubuntu SMP PREEMPT_DYNAMIC Thu Apr 6 07:48:48 UTC 2023 x86_64
[ 24.806] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash ---
[ 24.806] xorg-server 2:21.1.7-1ubuntu3 (For technical support please see http://www.ubuntu.com/support)
[ 24.806] Current version of pixman: 0.42.2
[ 24.806] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.806] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.806] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 27 13:52:44 2023
[ 24.807] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.807] (==) No Layout section. Using the first Screen section.
[ 24.807] (==) No screen section available. Using defaults.
[ 24.807] (**) |-->Screen "Default Screen Section" (0)
[ 24.807] (**) | |-->Monitor "<default monitor>"
[ 24.807] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.807] (==) Automatically adding devices
[ 24.807] (==) Automatically enabling devices
[ 24.807] (==) Automatically adding GPU devices
[ 24.807] (==) Automatically binding GPU devices
[ 24.807] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 24.807] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 24.807] Entry deleted from font path.
[ 24.807] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 24.807] Entry deleted from font path.
[ 24.807] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 24.807] Entry deleted from font path.
[ 24.807] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 24.807] Entry deleted from font path.
[ 24.807] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 24.807] Entry deleted from font path.
[ 24.807] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 24.807] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.807] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.807] (II) Loader magic: 0x564c34611020
[ 24.807] (II) Module ABI versions:
[ 24.807] X.Org ANSI C Emulation: 0.4
[ 24.807] X.Org Video Driver: 25.2
[ 24.807] X.Org XInput driver : 24.4
[ 24.807] X.Org Server Extension : 10.0
[ 24.807] (++) using VT number 1
[ 24.807] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 24.808] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.808] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 24.808] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 24.808] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 24.813] (--) PCI:*(0@0:2:0) 8086:46a6:1558:866d rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 24.813] (--) PCI: (1@0:0:0) 10de:25a2:1558:867d rev 161, Mem @ 0x75000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00004000/128
[ 24.813] (II) LoadModule: "glx"
[ 24.813] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.814] (II) Module glx: vendor="X.Org Foundation"
[ 24.814] compiled for 1.21.1.7, module version = 1.0.0
[ 24.814] ABI class: X.Org Server Extension, version 10.0
[ 24.870] (==) Matched modesetting as autoconfigured driver 0
[ 24.870] (==) Matched fbdev as autoconfigured driver 1
[ 24.870] (==) Matched vesa as autoconfigured driver 2
[ 24.870] (==) Assigned the driver to the xf86ConfigLayout
[ 24.870] (II) LoadModule: "modesetting"
[ 24.870] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.870] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.870] compiled for 1.21.1.7, module version = 1.21.1
[ 24.870] Module class: X.Org Video Driver
[ 24.870] ABI class: X.Org Video Driver, version 25.2
[ 24.870] (II) LoadModule: "fbdev"
[ 24.870] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 24.870] (II) Module fbdev: vendor="X.Org Foundation"
[ 24.870] compiled for 1.21.1.3, module version = 0.5.0
[ 24.870] Module class: X.Org Video Driver
[ 24.870] ABI class: X.Org Video Driver, version 25.2
[ 24.870] (II) LoadModule: "vesa"
[ 24.870] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.870] (II) Module vesa: vendor="X.Org Foundation"
[ 24.870] compiled for 1.21.1.3, module version = 2.5.0
[ 24.870] Module class: X.Org Video Driver
[ 24.870] ABI class: X.Org Video Driver, version 25.2
[ 24.870] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.870] (II) FBDEV: driver for framebuffer: fbdev
[ 24.870] (II) VESA: driver for VESA chipsets: vesa
[ 24.873] (II) modeset(0): using drv /dev/dri/card1
[ 24.873] (WW) Falling back to old probe method for fbdev
[ 24.873] (II) Loading sub module "fbdevhw"
[ 24.873] (II) LoadModule: "fbdevhw"
[ 24.873] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 24.873] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 24.873] compiled for 1.21.1.7, module version = 0.0.2
[ 24.873] ABI class: X.Org Video Driver, version 25.2
[ 24.874] (II) modeset(G0): using drv /dev/dri/card0
[ 24.874] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.874] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 24.874] (==) modeset(0): RGB weight 888
[ 24.874] (==) modeset(0): Default visual is TrueColor
[ 24.874] (II) Loading sub module "glamoregl"
[ 24.874] (II) LoadModule: "glamoregl"
[ 24.874] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 24.875] (II) Module glamoregl: vendor="X.Org Foundation"
[ 24.875] compiled for 1.21.1.7, module version = 1.0.1
[ 24.875] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.146] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 25.146] (II) modeset(0): glamor initialized
[ 25.146] (==) modeset(0): VariableRefresh: disabled
[ 25.146] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 25.147] (II) modeset(0): Output eDP-1 has no monitor section
[ 25.148] (II) modeset(0): Output HDMI-1 has no monitor section
[ 25.149] (II) modeset(0): Output DP-1 has no monitor section
[ 25.149] (II) modeset(0): Output HDMI-2 has no monitor section
[ 25.151] (II) modeset(0): EDID for output eDP-1
[ 25.151] (II) modeset(0): Manufacturer: BOE Model: 823 Serial#: 0
[ 25.151] (II) modeset(0): Year: 2018 Week: 1
[ 25.151] (II) modeset(0): EDID Version: 1.4
[ 25.151] (II) modeset(0): Digital Display Input
[ 25.151] (II) modeset(0): 8 bits per channel
[ 25.151] (II) modeset(0): Digital interface is DisplayPort
[ 25.151] (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 25.151] (II) modeset(0): Gamma: 2.20
[ 25.151] (II) modeset(0): No DPMS capabilities specified
[ 25.151] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 25.151] (II) modeset(0): First detailed timing is preferred mode
[ 25.151] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 25.151] (II) modeset(0): Display is continuous-frequency
[ 25.151] (II) modeset(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 25.151] (II) modeset(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 25.151] (II) modeset(0): Manufacturer's mask: 0
[ 25.151] (II) modeset(0): Supported detailed timing:
[ 25.151] (II) modeset(0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 25.151] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 25.151] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1140 v_border: 0
[ 25.151] (II) modeset(0): Supported detailed timing:
[ 25.151] (II) modeset(0): clock: 361.2 MHz Image Size: 382 x 215 mm
[ 25.151] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 25.151] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 2736 v_border: 0
[ 25.151] (II) modeset(0): Unknown vendor-specific block 2
[ 25.151] (II) modeset(0): EDID (in hex):
[ 25.151] (II) modeset(0): 00ffffffffffff0009e5230800000000
[ 25.151] (II) modeset(0): 011c0104a526157803de50a3544c9926
[ 25.151] (II) modeset(0): 0f505400000001010101010101010101
[ 25.151] (II) modeset(0): 010101010101188d801871383c406c30
[ 25.151] (II) modeset(0): aa007ed71000001a188d801871387846
[ 25.151] (II) modeset(0): 6c30aa007ed71000001a000000000000
[ 25.151] (II) modeset(0): 00000000000000000000000000000002
[ 25.151] (II) modeset(0): 000932ff0a3c962f1b439600000000b2
[ 25.152] (II) modeset(0): Printing probed modes for output eDP-1
[ 25.152] (II) modeset(0): Modeline "1920x1080"x144.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 25.152] (II) modeset(0): Modeline "1920x1080"x60.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 25.152] (II) modeset(0): Modeline "1920x1080"x144.0 332.81 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (160.0 kHz d)
[ 25.152] (II) modeset(0): Modeline "1680x1050"x144.0 286.19 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (155.5 kHz d)
[ 25.152] (II) modeset(0): Modeline "1400x1050"x144.0 292.96 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (155.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "1600x900"x144.0 234.72 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (133.4 kHz d)
[ 25.152] (II) modeset(0): Modeline "1280x1024"x144.0 259.15 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (153.5 kHz d)
[ 25.152] (II) modeset(0): Modeline "1400x900"x144.0 208.04 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (133.4 kHz d)
[ 25.152] (II) modeset(0): Modeline "1280x960"x144.0 259.23 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (144.0 kHz d)
[ 25.152] (II) modeset(0): Modeline "1440x810"x144.0 364.70 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (239.9 kHz d)
[ 25.152] (II) modeset(0): Modeline "1368x768"x144.0 173.85 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (113.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "1280x800"x144.0 170.68 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (118.5 kHz d)
[ 25.152] (II) modeset(0): Modeline "1152x864"x144.0 207.39 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (129.6 kHz d)
[ 25.152] (II) modeset(0): Modeline "1280x720"x144.0 153.67 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (106.7 kHz d)
[ 25.152] (II) modeset(0): Modeline "1024x768"x144.0 156.01 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (116.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "1024x768i"x144.0 74.36 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (58.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "960x720"x144.0 280.84 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (216.0 kHz d)
[ 25.152] (II) modeset(0): Modeline "928x696"x144.0 261.77 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (207.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "896x672"x144.0 245.73 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (200.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "1024x576"x144.0 101.12 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (85.4 kHz d)
[ 25.152] (II) modeset(0): Modeline "960x600"x144.0 184.83 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (177.7 kHz d)
[ 25.152] (II) modeset(0): Modeline "832x624"x144.0 110.66 832 864 928 1152 624 625 628 667 -hsync -vsync (96.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "960x540"x144.0 89.68 960 1008 1040 1120 540 543 548 556 +hsync -vsync (80.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "800x600"x144.0 92.17 800 824 896 1024 600 601 603 625 +hsync +vsync (90.0 kHz d)
[ 25.152] (II) modeset(0): Modeline "840x525"x144.0 143.10 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (155.5 kHz d)
[ 25.152] (II) modeset(0): Modeline "864x486"x144.0 73.74 864 912 944 1024 486 489 494 500 +hsync -vsync (72.0 kHz d)
[ 25.152] (II) modeset(0): Modeline "700x525"x144.0 146.48 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (155.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "800x450"x144.0 117.36 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (133.4 kHz d)
[ 25.152] (II) modeset(0): Modeline "640x512"x144.0 129.57 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (153.5 kHz d)
[ 25.152] (II) modeset(0): Modeline "700x450"x144.0 104.02 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (133.4 kHz d)
[ 25.152] (II) modeset(0): Modeline "640x480"x144.0 60.49 640 656 752 800 480 490 492 525 -hsync -vsync (75.6 kHz d)
[ 25.152] (II) modeset(0): Modeline "720x405"x144.0 53.10 720 768 800 880 405 408 413 419 +hsync -vsync (60.3 kHz d)
[ 25.152] (II) modeset(0): Modeline "720x400"x144.0 60.12 720 756 828 936 400 401 404 446 -hsync +vsync (64.2 kHz d)
[ 25.152] (II) modeset(0): Modeline "684x384"x144.0 86.92 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (113.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "640x400"x144.0 53.32 640 672 736 832 400 401 404 445 -hsync +vsync (64.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "576x432"x144.0 103.69 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (129.6 kHz d)
[ 25.152] (II) modeset(0): Modeline "640x360"x144.0 43.09 640 688 720 800 360 363 368 374 +hsync -vsync (53.9 kHz d)
[ 25.152] (II) modeset(0): Modeline "640x350"x144.0 53.32 640 672 736 832 350 382 385 445 +hsync -vsync (64.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "512x384"x144.0 78.00 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (116.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "512x384i"x144.0 37.14 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (58.8 kHz d)
[ 25.152] (II) modeset(0): Modeline "512x288"x144.0 50.47 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (85.3 kHz d)
[ 25.152] (II) modeset(0): Modeline "416x312"x144.0 55.25 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (95.9 kHz d)
[ 25.152] (II) modeset(0): Modeline "480x270"x144.0 44.84 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (80.1 kHz d)
[ 25.152] (II) modeset(0): Modeline "400x300"x144.0 46.01 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (89.9 kHz d)
[ 25.152] (II) modeset(0): Modeline "432x243"x144.0 36.87 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (72.0 kHz d)
[ 25.152] (II) modeset(0): Modeline "320x240"x144.0 30.19 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (75.5 kHz d)
[ 25.152] (II) modeset(0): Modeline "360x202"x144.0 26.49 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (60.2 kHz d)
[ 25.152] (II) modeset(0): Modeline "360x200"x144.0 30.06 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (64.2 kHz d)
[ 25.152] (II) modeset(0): Modeline "320x200"x144.0 26.60 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (63.9 kHz d)
[ 25.152] (II) modeset(0): Modeline "320x180"x144.0 21.55 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (53.9 kHz d)
[ 25.152] (II) modeset(0): Modeline "320x175"x144.0 26.60 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (63.9 kHz d)
[ 25.152] (II) modeset(0): EDID for output HDMI-1
[ 25.152] (II) modeset(0): EDID for output DP-1
[ 25.152] (II) modeset(0): EDID for output HDMI-2
[ 25.152] (II) modeset(0): Output eDP-1 connected
[ 25.152] (II) modeset(0): Output HDMI-1 disconnected
[ 25.152] (II) modeset(0): Output DP-1 disconnected
[ 25.152] (II) modeset(0): Output HDMI-2 disconnected
[ 25.152] (II) modeset(0): Using exact sizes for initial modes
[ 25.152] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 25.152] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 25.152] (==) modeset(0): DPI set to (96, 96)
[ 25.152] (II) Loading sub module "fb"
[ 25.152] (II) LoadModule: "fb"
[ 25.152] (II) Module "fb" already built-in
[ 25.152] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 25.152] (==) modeset(G0): RGB weight 888
[ 25.152] (==) modeset(G0): Default visual is TrueColor
[ 25.152] (II) Loading sub module "glamoregl"
[ 25.152] (II) LoadModule: "glamoregl"
[ 25.152] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 25.152] (II) Module glamoregl: vendor="X.Org Foundation"
[ 25.152] compiled for 1.21.1.7, module version = 1.0.1
[ 25.152] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.161] (II) modeset(G0): glamor X acceleration enabled on NV177
[ 25.161] (II) modeset(G0): glamor initialized
[ 25.161] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 25.161] (==) modeset(G0): DPI set to (96, 96)
[ 25.161] (II) Loading sub module "fb"
[ 25.161] (II) LoadModule: "fb"
[ 25.161] (II) Module "fb" already built-in
[ 25.161] (II) UnloadModule: "fbdev"
[ 25.161] (II) Unloading fbdev
[ 25.161] (II) UnloadSubModule: "fbdevhw"
[ 25.161] (II) Unloading fbdevhw
[ 25.161] (II) UnloadModule: "vesa"
[ 25.161] (II) Unloading vesa
[ 25.167] (==) modeset(0): Backing store enabled
[ 25.167] (==) modeset(0): Silken mouse enabled
[ 25.200] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 25.200] (==) modeset(0): DPMS enabled
[ 25.200] (II) modeset(0): [DRI2] Setup complete
[ 25.200] (II) modeset(0): [DRI2] DRI driver: iris
[ 25.200] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 25.203] (==) modeset(G0): Backing store enabled
[ 25.203] (==) modeset(G0): Silken mouse enabled
[ 25.203] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 25.203] (==) modeset(G0): DPMS enabled
[ 25.203] (II) modeset(G0): [DRI2] Setup complete
[ 25.203] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 25.203] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 25.203] (II) Initializing extension Generic Event Extension
[ 25.203] (II) Initializing extension SHAPE
[ 25.203] (II) Initializing extension MIT-SHM
[ 25.203] (II) Initializing extension XInputExtension
[ 25.203] (II) Initializing extension XTEST
[ 25.203] (II) Initializing extension BIG-REQUESTS
[ 25.204] (II) Initializing extension SYNC
[ 25.204] (II) Initializing extension XKEYBOARD
[ 25.204] (II) Initializing extension XC-MISC
[ 25.204] (II) Initializing extension SECURITY
[ 25.204] (II) Initializing extension XFIXES
[ 25.204] (II) Initializing extension RENDER
[ 25.204] (II) Initializing extension RANDR
[ 25.204] (II) Initializing extension COMPOSITE
[ 25.204] (II) Initializing extension DAMAGE
[ 25.204] (II) Initializing extension MIT-SCREEN-SAVER
[ 25.204] (II) Initializing extension DOUBLE-BUFFER
[ 25.204] (II) Initializing extension RECORD
[ 25.205] (II) Initializing extension DPMS
[ 25.205] (II) Initializing extension Present
[ 25.205] (II) Initializing extension DRI3
[ 25.205] (II) Initializing extension X-Resource
[ 25.205] (II) Initializing extension XVideo
[ 25.205] (II) Initializing extension XVideo-MotionCompensation
[ 25.205] (II) Initializing extension SELinux
[ 25.205] (II) SELinux: Disabled on system
[ 25.205] (II) Initializing extension GLX
[ 25.461] (II) AIGLX: Loaded and initialized iris
[ 25.461] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.461] (II) Initializing extension XFree86-VidModeExtension
[ 25.461] (II) Initializing extension XFree86-DGA
[ 25.461] (II) Initializing extension XFree86-DRI
[ 25.461] (II) Initializing extension DRI2
[ 25.461] (II) modeset(G0): Damage tracking initialized
[ 25.461] (II) modeset(0): Damage tracking initialized
[ 25.461] (II) modeset(0): Setting screen physical size to 508 x 285
[ 25.481] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.481] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.481] (II) LoadModule: "libinput"
[ 25.481] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 25.481] (II) Module libinput: vendor="X.Org Foundation"
[ 25.481] compiled for 1.20.14, module version = 1.2.1
[ 25.481] Module class: X.Org XInput Driver
[ 25.481] ABI class: X.Org XInput driver, version 24.1
[ 25.481] (II) Using input driver 'libinput' for 'Power Button'
[ 25.481] (**) Power Button: always reports core events
[ 25.481] (**) Option "Device" "/dev/input/event3"
[ 25.482] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 25.482] (II) event3 - Power Button: device is a keyboard
[ 25.482] (II) event3 - Power Button: device removed
[ 25.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 25.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.514] (**) Option "xkb_model" "pc105"
[ 25.514] (**) Option "xkb_layout" "us"
[ 25.514] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 25.514] (II) event3 - Power Button: device is a keyboard
[ 25.514] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 25.514] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 25.514] (II) Using input driver 'libinput' for 'Video Bus'
[ 25.514] (**) Video Bus: always reports core events
[ 25.514] (**) Option "Device" "/dev/input/event9"
[ 25.514] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 25.514] (II) event9 - Video Bus: device is a keyboard
[ 25.515] (II) event9 - Video Bus: device removed
[ 25.566] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event9"
[ 25.566] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.566] (**) Option "xkb_model" "pc105"
[ 25.566] (**) Option "xkb_layout" "us"
[ 25.566] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 25.566] (II) event9 - Video Bus: device is a keyboard
[ 25.566] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 25.566] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.566] (II) Using input driver 'libinput' for 'Power Button'
[ 25.566] (**) Power Button: always reports core events
[ 25.566] (**) Option "Device" "/dev/input/event0"
[ 25.566] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 25.566] (II) event0 - Power Button: device is a keyboard
[ 25.566] (II) event0 - Power Button: device removed
[ 25.582] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 25.582] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 25.582] (**) Option "xkb_model" "pc105"
[ 25.582] (**) Option "xkb_layout" "us"
[ 25.582] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 25.582] (II) event0 - Power Button: device is a keyboard
[ 25.582] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.582] (II) No input driver specified, ignoring this device.
[ 25.582] (II) This device may have been added with another device file.
[ 25.582] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 25.582] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 25.582] (II) Using input driver 'libinput' for 'Sleep Button'
[ 25.582] (**) Sleep Button: always reports core events
[ 25.582] (**) Option "Device" "/dev/input/event1"
[ 25.582] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 25.582] (II) event1 - Sleep Button: device is a keyboard
[ 25.583] (II) event1 - Sleep Button: device removed
[ 25.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 25.602] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 25.602] (**) Option "xkb_model" "pc105"
[ 25.602] (**) Option "xkb_layout" "us"
[ 25.602] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 25.602] (II) event1 - Sleep Button: device is a keyboard
[ 25.602] (II) config/udev: Adding input device BisonCam,NB Pro: BisonCam,NB Pr (/dev/input/event11)
[ 25.602] (**) BisonCam,NB Pro: BisonCam,NB Pr: Applying InputClass "libinput keyboard catchall"
[ 25.602] (II) Using input driver 'libinput' for 'BisonCam,NB Pro: BisonCam,NB Pr'
[ 25.602] (**) BisonCam,NB Pro: BisonCam,NB Pr: always reports core events
[ 25.602] (**) Option "Device" "/dev/input/event11"
[ 25.603] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 25.603] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 25.603] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: device removed
[ 25.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input16/event11"
[ 25.654] (II) XINPUT: Adding extended input device "BisonCam,NB Pro: BisonCam,NB Pr" (type: KEYBOARD, id 10)
[ 25.654] (**) Option "xkb_model" "pc105"
[ 25.654] (**) Option "xkb_layout" "us"
[ 25.654] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: is tagged by udev as: Keyboard
[ 25.654] (II) event11 - BisonCam,NB Pro: BisonCam,NB Pr: device is a keyboard
[ 25.654] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/event7)
[ 25.654] (**) PixArt HP Travel USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 25.655] (II) Using input driver 'libinput' for 'PixArt HP Travel USB Optical Mouse'
[ 25.655] (**) PixArt HP Travel USB Optical Mouse: always reports core events
[ 25.655] (**) Option "Device" "/dev/input/event7"
[ 25.714] (II) event7 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 25.714] (II) event7 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 25.714] (II) event7 - PixArt HP Travel USB Optical Mouse: device removed
[ 25.758] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.2/2-9.2:1.0/0003:03F0:1041.0002/input/input10/event7"
[ 25.758] (II) XINPUT: Adding extended input device "PixArt HP Travel USB Optical Mouse" (type: MOUSE, id 11)
[ 25.758] (**) Option "AccelerationScheme" "none"
[ 25.758] (**) PixArt HP Travel USB Optical Mouse: (accel) selected scheme none/0
[ 25.758] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration factor: 2.000
[ 25.758] (**) PixArt HP Travel USB Optical Mouse: (accel) acceleration threshold: 4
[ 25.818] (II) event7 - PixArt HP Travel USB Optical Mouse: is tagged by udev as: Mouse
[ 25.818] (II) event7 - PixArt HP Travel USB Optical Mouse: device is a pointer
[ 25.819] (II) config/udev: Adding input device PixArt HP Travel USB Optical Mouse (/dev/input/mouse2)
[ 25.819] (II) No input driver specified, ignoring this device.
[ 25.819] (II) This device may have been added with another device file.
[ 25.819] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/event6)
[ 25.819] (**) FTCS1000:01 2808:0102 Mouse: Applying InputClass "libinput pointer catchall"
[ 25.819] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Mouse'
[ 25.819] (**) FTCS1000:01 2808:0102 Mouse: always reports core events
[ 25.819] (**) Option "Device" "/dev/input/event6"
[ 25.819] (II) event6 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 25.819] (II) event6 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 25.819] (II) event6 - FTCS1000:01 2808:0102 Mouse: device removed
[ 25.886] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0001/input/input13/event6"
[ 25.886] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Mouse" (type: MOUSE, id 12)
[ 25.886] (**) Option "AccelerationScheme" "none"
[ 25.886] (**) FTCS1000:01 2808:0102 Mouse: (accel) selected scheme none/0
[ 25.886] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration factor: 2.000
[ 25.886] (**) FTCS1000:01 2808:0102 Mouse: (accel) acceleration threshold: 4
[ 25.886] (II) event6 - FTCS1000:01 2808:0102 Mouse: is tagged by udev as: Mouse Pointingstick
[ 25.887] (II) event6 - FTCS1000:01 2808:0102 Mouse: device is a pointer
[ 25.887] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Mouse (/dev/input/mouse0)
[ 25.888] (II) No input driver specified, ignoring this device.
[ 25.888] (II) This device may have been added with another device file.
[ 25.888] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/event10)
[ 25.888] (**) FTCS1000:01 2808:0102 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 25.888] (II) Using input driver 'libinput' for 'FTCS1000:01 2808:0102 Touchpad'
[ 25.888] (**) FTCS1000:01 2808:0102 Touchpad: always reports core events
[ 25.888] (**) Option "Device" "/dev/input/event10"
[ 25.889] (II) event10 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 25.890] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 25.890] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device removed
[ 25.926] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-FTCS1000:01/0018:2808:0102.0001/input/input14/event10"
[ 25.926] (II) XINPUT: Adding extended input device "FTCS1000:01 2808:0102 Touchpad" (type: TOUCHPAD, id 13)
[ 25.926] (**) Option "AccelerationScheme" "none"
[ 25.926] (**) FTCS1000:01 2808:0102 Touchpad: (accel) selected scheme none/0
[ 25.926] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration factor: 2.000
[ 25.926] (**) FTCS1000:01 2808:0102 Touchpad: (accel) acceleration threshold: 4
[ 25.927] (II) event10 - FTCS1000:01 2808:0102 Touchpad: is tagged by udev as: Touchpad
[ 25.927] (II) event10 - FTCS1000:01 2808:0102 Touchpad: device is a touchpad
[ 25.928] (II) config/udev: Adding input device FTCS1000:01 2808:0102 Touchpad (/dev/input/mouse1)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[ 25.928] (II) No input driver specified, ignoring this device.
[ 25.928] (II) This device may have been added with another device file.
[ 25.928] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 25.928] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 25.928] (II) Using input driver 'libinput' for 'Intel HID events'
[ 25.928] (**) Intel HID events: always reports core events
[ 25.928] (**) Option "Device" "/dev/input/event5"
[ 25.929] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 25.929] (II) event5 - Intel HID events: device is a keyboard
[ 25.929] (II) event5 - Intel HID events: device removed
[ 25.938] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input12/event5"
[ 25.938] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[ 25.938] (**) Option "xkb_model" "pc105"
[ 25.938] (**) Option "xkb_layout" "us"
[ 25.938] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 25.938] (II) event5 - Intel HID events: device is a keyboard
[ 25.938] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 25.938] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 25.938] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 25.938] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.938] (**) Option "Device" "/dev/input/event4"
[ 25.939] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 25.939] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 25.939] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 25.966] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 25.966] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 25.966] (**) Option "xkb_model" "pc105"
[ 25.966] (**) Option "xkb_layout" "us"
[ 25.966] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 25.966] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 25.967] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event8)
[ 25.967] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 25.967] (II) Using input driver 'libinput' for 'ImPS/2 Generic Wheel Mouse'
[ 25.967] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 25.967] (**) Option "Device" "/dev/input/event8"
[ 25.967] (II) event8 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 25.967] (II) event8 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 25.967] (II) event8 - ImPS/2 Generic Wheel Mouse: device removed
[ 26.006] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event8"
[ 26.006] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 16)
[ 26.006] (**) Option "AccelerationScheme" "none"
[ 26.006] (**) ImPS/2 Generic Wheel Mouse: (accel) selected scheme none/0
[ 26.006] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 26.006] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 26.006] (II) event8 - ImPS/2 Generic Wheel Mouse: is tagged by udev as: Mouse
[ 26.006] (II) event8 - ImPS/2 Generic Wheel Mouse: device is a pointer
[ 26.006] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse3)
[ 26.006] (II) No input driver specified, ignoring this device.
[ 26.006] (II) This device may have been added with another device file.
[ 26.082] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 26.082] (II) modeset(0): Printing DDC gathered Modelines:
[ 26.082] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 26.082] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 26.088] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 26.088] (II) modeset(0): Printing DDC gathered Modelines:
[ 26.088] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 26.088] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 26.102] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 26.102] (II) modeset(0): Printing DDC gathered Modelines:
[ 26.102] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 26.102] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 26.109] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 26.109] (II) modeset(0): Printing DDC gathered Modelines:
[ 26.109] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 26.109] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 28.102] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 28.102] (II) modeset(0): Printing DDC gathered Modelines:
[ 28.102] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 28.102] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 28.949] (II) modeset(0): EDID vendor "BOE", prod id 2083
[ 28.949] (II) modeset(0): Printing DDC gathered Modelines:
[ 28.949] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 1140 +hsync -vsync (164.2 kHz eP)
[ 28.949] (II) modeset(0): Modeline "1920x1080"x0.0 361.20 1920 2028 2076 2200 1080 1090 1100 2736 +hsync -vsync (164.2 kHz e)
[ 561.865] (II) modeset(0): Allocate new frame buffer 640x480 stride
[ 566.478] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
It looks like the bogus display modes are not being generated there. When I went to display settings, only 144Hz was listed as available for 640x480. I was able to successfully switch to 640x480 and revert it back to 1920x1080 again without any issues.
Adding that modeline you provided in /etc/X11/xorg.conf.d/11-monitor.conf did not prevent it from adding the other bogus modes by the way.
Last edited by RogerS_01 (2023-07-27 14:21:14)
Offline
By adding the following line in /etc/X11/xorg.conf.d/11-monitor.conf I did get 144Hz as the first option for 640x480 in the Display Configuration section of System Settings, and I was successfully able to switch to it.
Modeline "640x480" 60.49 640 656 752 800 480 490 492 525 -hsync -vsync
Unfortunately the screen still went black when trying to run the old game, probably because 85Hz still seems to be listed as the first option by xrandr.
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
1920x1080 144.02*+ 60.01 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 85.02 75.02 60.02
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 59.74
1024x768 85.00 75.05 60.04 85.00 75.03 70.07 60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 85.00 75.00 70.00 65.00 60.00 85.14 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 85.09 144.02 60.00 85.01 72.81 75.00 59.95 59.94
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
HDMI-1-1 disconnected (normal left inverted right x axis y axis)
DP-1-1 disconnected (normal left inverted right x axis y axis)
HDMI-1-2 disconnected (normal left inverted right x axis y axis)
Last edited by RogerS_01 (2023-07-28 03:20:47)
Offline
Actually when I added all the modelines from the Kubuntu session (except the three at the top for 1920x1080) to /etc/X11/xorg.conf.d/11-monitor.conf, the game started working. It's probably using a different full screen resolution than 640x480, because it does have black borders on the sides.
Looks like I've solved it, thank you for your help
Last edited by RogerS_01 (2023-07-27 15:05:02)
Offline
Pages: 1