Wireplumber and pipewire not working[SOLVED]

JohnDoe439 · 2023-08-31 02:45:48

I tried it on KDE, i3 and hyprland, and got the same error message:

 Aug 31 03:19:00 archlinux systemd[609]: Started Multimedia Service Session Manager. Aug 31 03:19:00 archlinux wireplumber[2446]: [0:13:32.676061739] [2446] ERROR IPAModule ipa_module.cpp:172 Symbol ipaModuleInfo not found Aug 31 03:19:00 archlinux wireplumber[2446]: [0:13:32.676092572] [2446] ERROR IPAModule ipa_module.cpp:292 v4l2-compat.so: IPA module has no valid info Aug 31 03:19:00 archlinux wireplumber[2446]: [0:13:32.676155530] [2446]  INFO Camera camera_manager.cpp:284 libcamera v0.1.0 Aug 31 03:19:00 archlinux wireplumber[2446]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner

I stopped and disabled pulseaudio, tried reinstalling wireplumber and pipewire multiple times, I'm using the latest versions of both. Needless to say, playback doesn't work and neither does audio. Also, I'm using proprietary drivers and GTX 1660

Last edited by JohnDoe439 (2023-08-31 15:36:08)

ScarletFire · 2023-08-31 04:08:33

For a quick sanity check, can you post the output of

systemctl --user status pipewire{,-pulse} wireplumber

sudo fuser -v /dev/snd/*

sudo dmesg | grep -iE 'snd|sof'

Last edited by ScarletFire (2023-08-31 04:11:00)

Scimmia · 2023-08-31 04:09:54

And when you do, please use code tags, your output in the OP is borderline unreadable

seth · 2023-08-31 07:11:34

On top of that the libcamera warnings are completely irrelevant.
Please post your complete system journal for the boot:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

JohnDoe439 · 2023-08-31 13:45:02

ScarletFire wrote:

For a quick sanity check, can you post the output of systemctl --user status pipewire{,-pulse} wireplumber

❯ systemctl --user status pipewire{,-pulse} wireplumber

Unit pipewire-pulse.service could not be found.
● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: active (running) since Thu 2023-08-31 15:13:55 CEST; 15min ago
TriggeredBy: ● pipewire.socket
   Main PID: 718 (pipewire)
      Tasks: 3 (limit: 18992)
     Memory: 4.8M
        CPU: 95ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─718 /usr/bin/pipewire

Aug 31 15:13:55 archlinux systemd[596]: Started PipeWire Multimedia Service.

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: active (running) since Thu 2023-08-31 15:13:55 CEST; 15min ago
   Main PID: 719 (wireplumber)
      Tasks: 7 (limit: 18992)
     Memory: 21.5M
        CPU: 480ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─719 /usr/bin/wireplumber

Aug 31 15:13:55 archlinux systemd[596]: Started Multimedia Service Session Manager.
Aug 31 15:13:56 archlinux wireplumber[719]: [0:00:19.577733025] [719] ERROR IPAModule ipa_module.cpp:172 Symbol ipaModuleInfo not found
Aug 31 15:13:56 archlinux wireplumber[719]: [0:00:19.577756640] [719] ERROR IPAModule ipa_module.cpp:292 v4l2-compat.so: IPA module has no valid info
Aug 31 15:13:56 archlinux wireplumber[719]: [0:00:19.577806503] [719]  INFO Camera camera_manager.cpp:284 libcamera v0.1.0
Aug 31 15:13:56 archlinux wireplumber[719]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner

sudo fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:      719 F.... wireplumber
                                   1421 F.... pulseaudio
/dev/snd/controlC1:      719 F.... wireplumber
                                   1421 F.... pulseaudio
/dev/snd/seq:              718 F.... pipewire

sudo dmesg | grep -iE 'snd|sof'

[    0.043620] software IO TLB: area num 8.
[    0.284207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.341490] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.341491] software IO TLB: mapped [mem 0x0000000084a24000-0x0000000088a24000] (64MB)
[    0.572590] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.572604] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.766512] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    4.933661] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.934079] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    4.934134] snd_hda_intel 0000:01:00.1: Disabling MSI
[    4.934137] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.012136] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.012140] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.012142] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.012144] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.012145] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.012146] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.012148] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.012149] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a

Edit: After removing pulse-audio along with its dependencies and installing pipewire-pulse, audio works just fine but I still get those errors:

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: active (running) since Thu 2023-08-31 16:54:37 CEST; 1min 23s ago
TriggeredBy: ● pipewire.socket
   Main PID: 11198 (pipewire)
      Tasks: 3 (limit: 18992)
     Memory: 10.6M
        CPU: 3.112s
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─11198 /usr/bin/pipewire

Aug 31 16:54:37 archlinux systemd[596]: Started PipeWire Multimedia Service.

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: active (running) since Thu 2023-08-31 16:54:37 CEST; 1min 23s ago
   Main PID: 11205 (wireplumber)
      Tasks: 7 (limit: 18992)
     Memory: 9.3M
        CPU: 543ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─11205 /usr/bin/wireplumber

Aug 31 16:54:37 archlinux systemd[596]: Started Multimedia Service Session Manager.
Aug 31 16:54:37 archlinux wireplumber[11205]: [1:41:00.748639439] [11205] ERROR IPAModule ipa_module.cpp:172 Symbol ipaModuleInfo not found
Aug 31 16:54:37 archlinux wireplumber[11205]: [1:41:00.748650225] [11205] ERROR IPAModule ipa_module.cpp:292 v4l2-compat.so: IPA module has no valid info
Aug 31 16:54:37 archlinux wireplumber[11205]: [1:41:00.748674252] [11205]  INFO Camera camera_manager.cpp:284 libcamera v0.1.0
Aug 31 16:54:37 archlinux wireplumber[11205]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner

Last edited by JohnDoe439 (2023-08-31 15:02:15)

seth · 2023-08-31 13:46:58

Looks like you're running pipwire and pulseaudio concurrently, install pipewire-pulse, replace pulseaudio.

JohnDoe439 · 2023-08-31 15:13:33

seth wrote:

Looks like you're running pipwire and pulseaudio concurrently, install pipewire-pulse, replace pulseaudio.

So I should just ignore those warnings?

❯ systemctl --user status pipewire wireplumber

● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: active (running) since Thu 2023-08-31 16:54:37 CEST; 18min ago
TriggeredBy: ● pipewire.socket
   Main PID: 11198 (pipewire)
      Tasks: 3 (limit: 18992)
     Memory: 16.0M
        CPU: 37.290s
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─11198 /usr/bin/pipewire

Aug 31 16:54:37 archlinux systemd[596]: Started PipeWire Multimedia Service.

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: active (running) since Thu 2023-08-31 16:54:37 CEST; 18min ago
   Main PID: 11205 (wireplumber)
      Tasks: 7 (limit: 18992)
     Memory: 11.4M
        CPU: 641ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─11205 /usr/bin/wireplumber

Aug 31 16:54:37 archlinux systemd[596]: Started Multimedia Service Session Manager.
Aug 31 16:54:37 archlinux wireplumber[11205]: [1:41:00.748639439] [11205] ERROR IPAModule ipa_module.cpp:172 Symbol ipaModuleInfo not found
Aug 31 16:54:37 archlinux wireplumber[11205]: [1:41:00.748650225] [11205] ERROR IPAModule ipa_module.cpp:292 v4l2-compat.so: IPA module has no valid info
Aug 31 16:54:37 archlinux wireplumber[11205]: [1:41:00.748674252] [11205]  INFO Camera camera_manager.cpp:284 libcamera v0.1.0
Aug 31 16:54:37 archlinux wireplumber[11205]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner

seth · 2023-08-31 15:15:49

seth wrote:

the libcamera warnings are completely irrelevant.

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

JohnDoe439 · 2023-08-31 15:37:43

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

Ofc, thanks again

Arch Linux

#1 2023-08-31 02:45:48

Wireplumber and pipewire not working[SOLVED]

#2 2023-08-31 04:08:33

Re: Wireplumber and pipewire not working[SOLVED]

#3 2023-08-31 04:09:54

Re: Wireplumber and pipewire not working[SOLVED]

#4 2023-08-31 07:11:34

Re: Wireplumber and pipewire not working[SOLVED]

#5 2023-08-31 13:45:02

Re: Wireplumber and pipewire not working[SOLVED]

#6 2023-08-31 13:46:58

Re: Wireplumber and pipewire not working[SOLVED]

#7 2023-08-31 15:13:33

Re: Wireplumber and pipewire not working[SOLVED]

#8 2023-08-31 15:15:49

Re: Wireplumber and pipewire not working[SOLVED]

#9 2023-08-31 15:37:43

Re: Wireplumber and pipewire not working[SOLVED]

Board footer