You are not logged in.
- Topics: Active | Unanswered
#1 2023-09-07 20:11:46
- Cknight70
- Member
- Registered: 2018-01-24
- Posts: 76
[solved] BTRFS drive disconnects, I/O error
Hello, for the last few weeks, I've noticed my 2TB HDD will sometimes become unusable until reboot, this seems random but it always happens when I play War Thunder. When this happens, will seem to be read only, but is actually not readable. If I use fdisk to see my disks I see /dev/sda1 (the drive in question) is missing. I can umount, but cannot re-mount the drive until reboot.
The entire drive is formatted with btrfs, it is not encrypted.
I have tried using btrfs-check to check for errors, but it did not find any.
I also re-located war thunder to my ssd, but today I got another I/O error/disk becoming unusuable while playing.
I have never troubleshooted something like this before, so any resources or places to look etc would be appreciated.
My logs:
after the error occurs this is fdisk -l
Disk /dev/sdb: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: ST2000DM008-2FR1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 0F9F7052-9337-4A60-801A-474E8B166958
Device Start End Sectors Size Type
/dev/sdb1 2048 3907028991 3907026944 1.8T Microsoft basic data
Disk /dev/nvme0n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: CT1000P3SSD8
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 6F214933-93E5-4545-A430-7FB6BF6E9E1E
Device Start End Sectors Size Type
/dev/nvme0n1p1 2048 1230847 1228800 600M EFI System
/dev/nvme0n1p2 1230848 525518847 524288000 250G Microsoft basic data
/dev/nvme0n1p3 525518848 525551615 32768 16M Microsoft reserved
/dev/nvme0n1p4 525551616 526780415 1228800 600M Linux filesystem
/dev/nvme0n1p5 526780416 1953523711 1426743296 680.3G Linux filesystem
Disk /dev/mapper/cryptlvm: 680.31 GiB, 730475790336 bytes, 1426710528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/Arch-root: 680.3 GiB, 730471596032 bytes, 1426702336 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop0: 169 GiB, 181462368256 bytes, 354418688 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/veracrypt6: 169 GiB, 181462106112 bytes, 354418176 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000what fdisk reports about /dev/sda1 when there has been no error
Disk /dev/sda: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: ST2000DM006-2DM1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: C20BECD0-4227-8B4A-89BE-BB1E233F7EBB
Device Start End Sectors Size Type
/dev/sda1 2048 3907022847 3907020800 1.8T Linux filesystemdmesg (relevant part starting at 4964.869217 )
[ 0.000000] Linux version 6.4.12-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Thu, 24 Aug 2023 00:38:14 +0000
[ 0.000000] Command line: cryptdevice=UUID=22033c1d-a669-4c10-a8dc-05339ae4c447:cryptlvm:allow-discards root=/dev/Arch/root rw nvidia-drm.modeset=1 initrd=\amd-ucode.img initrd=\initramfs-linux.img
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c7efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009c7f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a211000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b3a5dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3a5e000-0x00000000b3a5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b3a5f000-0x00000000baabafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabb000-0x00000000bc273fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bc274000-0x00000000bc4a5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bc4a6000-0x00000000bcba3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcba4000-0x00000000bd9fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083f2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000083f300000-0x000000083fffffff] reserved
[ 0.000000] The simpledrm driver will not be probed
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xb125f018-0xb1270057] usable ==> usable
[ 0.000000] e820: update [mem 0xb125f018-0xb1270057] usable ==> usable
[ 0.000000] e820: update [mem 0xad82c018-0xad84c257] usable ==> usable
[ 0.000000] e820: update [mem 0xad82c018-0xad84c257] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009c7efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009c7f000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a211000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000ad82c017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ad82c018-0x00000000ad84c257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ad84c258-0x00000000b125f017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b125f018-0x00000000b1270057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b1270058-0x00000000b3a5dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b3a5e000-0x00000000b3a5efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b3a5f000-0x00000000baabafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000baabb000-0x00000000bc273fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bc274000-0x00000000bc4a5fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bc4a6000-0x00000000bcba3fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bcba4000-0x00000000bd9fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bd9ff000-0x00000000beffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000083f2fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000083f300000-0x000000083fffffff] reserved
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI=0xbc4a5000 ACPI 2.0=0xbc4a5014 TPMFinalLog=0xbcb59000 SMBIOS=0xbd7fb000 SMBIOS 3.0=0xbd7fa000 MEMATTR=0xb6769818 ESRT=0xb8e1fb18 INITRD=0xb12b9018 RNG=0xbc3ab018 TPMEventLog=0xb1288018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem63: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ 0.000000] efi: Remove mem64: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] reserved
[ 0.000000] efi: Remove mem65: MMIO range=[0xfd600000-0xfd7fffff] (2MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd600000-0xfd7fffff] reserved
[ 0.000000] efi: Not removing mem66: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem67: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem68: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem69: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem70: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem71: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem72: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem73: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem74: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem75: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/ROG STRIX B450-F GAMING, BIOS 4901 07/25/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4120.125 MHz processor
[ 0.000459] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000461] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000469] last_pfn = 0x83f300 max_arch_pfn = 0x400000000
[ 0.000475] total RAM covered: 3071M
[ 0.000615] Found optimal setting for mtrr clean up
[ 0.000615] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000617] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001358] e820: update [mem 0xbc610000-0xbc61ffff] usable ==> reserved
[ 0.001363] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.001367] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.004898] esrt: Reserving ESRT space from 0x00000000b8e1fb18 to 0x00000000b8e1fb50.
[ 0.004903] e820: update [mem 0xb8e1f000-0xb8e1ffff] usable ==> reserved
[ 0.004919] Using GB pages for direct mapping
[ 0.005812] Secure boot disabled
[ 0.005812] RAMDISK: [mem 0x79729000-0x7ffebfff]
[ 0.005817] ACPI: Early table checksum verification disabled
[ 0.005820] ACPI: RSDP 0x00000000BC4A5014 000024 (v02 ALASKA)
[ 0.005823] ACPI: XSDT 0x00000000BC4A4728 0000C4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.005828] ACPI: FACP 0x00000000BC49D000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.005831] ACPI: DSDT 0x00000000BC48E000 00E752 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.005834] ACPI: FACS 0x00000000BCB89000 000040
[ 0.005836] ACPI: SSDT 0x00000000BC4A3000 00092A (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.005838] ACPI: SSDT 0x00000000BC49F000 003CAE (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.005840] ACPI: SSDT 0x00000000BC49E000 000164 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.005842] ACPI: FIDT 0x00000000BC48D000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005845] ACPI: MCFG 0x00000000BC48C000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.005847] ACPI: HPET 0x00000000BC48B000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.005849] ACPI: SSDT 0x00000000BC3AC000 0010AF (v01 AMD MYRTLE 00000001 INTL 20120913)
[ 0.005851] ACPI: IVRS 0x00000000BC489000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.005853] ACPI: FPDT 0x00000000BC488000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.005855] ACPI: BGRT 0x00000000BC487000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005857] ACPI: WPBT 0x00000000BC3BF000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.005859] ACPI: TPM2 0x00000000BC3BE000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.005862] ACPI: PCCT 0x00000000BC3BD000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.005864] ACPI: SSDT 0x00000000BC3B7000 00558B (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.005866] ACPI: CRAT 0x00000000BC3B5000 0016D0 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.005868] ACPI: CDIT 0x00000000BC3B4000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.005870] ACPI: SSDT 0x00000000BC3B0000 0037B0 (v01 AMD MYRTLE 00000001 INTL 20120913)
[ 0.005872] ACPI: SSDT 0x00000000BC3AF000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.005874] ACPI: APIC 0x00000000BC3AE000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.005876] ACPI: Reserving FACP table memory at [mem 0xbc49d000-0xbc49d113]
[ 0.005877] ACPI: Reserving DSDT table memory at [mem 0xbc48e000-0xbc49c751]
[ 0.005877] ACPI: Reserving FACS table memory at [mem 0xbcb89000-0xbcb8903f]
[ 0.005878] ACPI: Reserving SSDT table memory at [mem 0xbc4a3000-0xbc4a3929]
[ 0.005879] ACPI: Reserving SSDT table memory at [mem 0xbc49f000-0xbc4a2cad]
[ 0.005879] ACPI: Reserving SSDT table memory at [mem 0xbc49e000-0xbc49e163]
[ 0.005880] ACPI: Reserving FIDT table memory at [mem 0xbc48d000-0xbc48d09b]
[ 0.005880] ACPI: Reserving MCFG table memory at [mem 0xbc48c000-0xbc48c03b]
[ 0.005881] ACPI: Reserving HPET table memory at [mem 0xbc48b000-0xbc48b037]
[ 0.005881] ACPI: Reserving SSDT table memory at [mem 0xbc3ac000-0xbc3ad0ae]
[ 0.005882] ACPI: Reserving IVRS table memory at [mem 0xbc489000-0xbc4890cf]
[ 0.005883] ACPI: Reserving FPDT table memory at [mem 0xbc488000-0xbc488043]
[ 0.005883] ACPI: Reserving BGRT table memory at [mem 0xbc487000-0xbc487037]
[ 0.005884] ACPI: Reserving WPBT table memory at [mem 0xbc3bf000-0xbc3bf03b]
[ 0.005884] ACPI: Reserving TPM2 table memory at [mem 0xbc3be000-0xbc3be04b]
[ 0.005885] ACPI: Reserving PCCT table memory at [mem 0xbc3bd000-0xbc3bd06d]
[ 0.005885] ACPI: Reserving SSDT table memory at [mem 0xbc3b7000-0xbc3bc58a]
[ 0.005886] ACPI: Reserving CRAT table memory at [mem 0xbc3b5000-0xbc3b66cf]
[ 0.005887] ACPI: Reserving CDIT table memory at [mem 0xbc3b4000-0xbc3b4028]
[ 0.005887] ACPI: Reserving SSDT table memory at [mem 0xbc3b0000-0xbc3b37af]
[ 0.005888] ACPI: Reserving SSDT table memory at [mem 0xbc3af000-0xbc3af0be]
[ 0.005888] ACPI: Reserving APIC table memory at [mem 0xbc3ae000-0xbc3ae15d]
[ 0.005937] No NUMA configuration found
[ 0.005938] Faking a node at [mem 0x0000000000000000-0x000000083f2fffff]
[ 0.005940] NODE_DATA(0) allocated [mem 0x83f2fb000-0x83f2fffff]
[ 0.005975] Zone ranges:
[ 0.005975] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005977] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005978] Normal [mem 0x0000000100000000-0x000000083f2fffff]
[ 0.005979] Device empty
[ 0.005980] Movable zone start for each node
[ 0.005980] Early memory node ranges
[ 0.005981] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.005982] node 0: [mem 0x0000000000100000-0x0000000009c7efff]
[ 0.005983] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.005983] node 0: [mem 0x000000000a211000-0x000000000affffff]
[ 0.005984] node 0: [mem 0x000000000b020000-0x00000000b3a5dfff]
[ 0.005985] node 0: [mem 0x00000000b3a5f000-0x00000000baabafff]
[ 0.005985] node 0: [mem 0x00000000bd9ff000-0x00000000beffffff]
[ 0.005986] node 0: [mem 0x0000000100000000-0x000000083f2fffff]
[ 0.005988] Initmem setup node 0 [mem 0x0000000000001000-0x000000083f2fffff]
[ 0.005992] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006010] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.006164] On node 0, zone DMA32: 897 pages in unavailable ranges
[ 0.006179] On node 0, zone DMA32: 17 pages in unavailable ranges
[ 0.009614] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.009777] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.009896] On node 0, zone DMA32: 12100 pages in unavailable ranges
[ 0.051468] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.051496] On node 0, zone Normal: 3328 pages in unavailable ranges
[ 0.051734] ACPI: PM-Timer IO Port: 0x808
[ 0.051741] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.051753] IOAPIC[0]: apic_id 25, version 33, address 0xfec00000, GSI 0-23
[ 0.051759] IOAPIC[1]: apic_id 26, version 33, address 0xfec01000, GSI 24-55
[ 0.051760] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.051762] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.051765] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.051766] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.051774] e820: update [mem 0xb6227000-0xb626cfff] usable ==> reserved
[ 0.051788] smpboot: Allowing 32 CPUs, 8 hotplug CPUs
[ 0.051810] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.051811] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.051813] PM: hibernation: Registered nosave memory: [mem 0x09c7f000-0x09ffffff]
[ 0.051814] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a210fff]
[ 0.051815] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.051817] PM: hibernation: Registered nosave memory: [mem 0xad82c000-0xad82cfff]
[ 0.051818] PM: hibernation: Registered nosave memory: [mem 0xad84c000-0xad84cfff]
[ 0.051819] PM: hibernation: Registered nosave memory: [mem 0xb125f000-0xb125ffff]
[ 0.051821] PM: hibernation: Registered nosave memory: [mem 0xb1270000-0xb1270fff]
[ 0.051822] PM: hibernation: Registered nosave memory: [mem 0xb3a5e000-0xb3a5efff]
[ 0.051824] PM: hibernation: Registered nosave memory: [mem 0xb6227000-0xb626cfff]
[ 0.051825] PM: hibernation: Registered nosave memory: [mem 0xb8e1f000-0xb8e1ffff]
[ 0.051826] PM: hibernation: Registered nosave memory: [mem 0xbaabb000-0xbc273fff]
[ 0.051827] PM: hibernation: Registered nosave memory: [mem 0xbc274000-0xbc4a5fff]
[ 0.051827] PM: hibernation: Registered nosave memory: [mem 0xbc4a6000-0xbcba3fff]
[ 0.051828] PM: hibernation: Registered nosave memory: [mem 0xbcba4000-0xbd9fefff]
[ 0.051829] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
[ 0.051830] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfe9fffff]
[ 0.051830] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.051831] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.051831] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.051832] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.051832] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.051833] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.051833] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.051833] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.051834] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.051834] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.051835] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.051835] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.051836] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.051836] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.051837] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.051837] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.051839] [mem 0xc0000000-0xfe9fffff] available for PCI devices
[ 0.051840] Booting paravirtualized kernel on bare hardware
[ 0.051842] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.055978] setup_percpu: NR_CPUS:320 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.056913] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.056919] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.056921] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.056927] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.056949] Kernel command line: cryptdevice=UUID=22033c1d-a669-4c10-a8dc-05339ae4c447:cryptlvm:allow-discards root=/dev/Arch/root rw nvidia-drm.modeset=1 initrd=\amd-ucode.img initrd=\initramfs-linux.img
[ 0.057013] Unknown kernel command line parameters "cryptdevice=UUID=22033c1d-a669-4c10-a8dc-05339ae4c447:cryptlvm:allow-discards", will be passed to user space.
[ 0.057029] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.057030] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.057030] printk: log_buf_len min size: 131072 bytes
[ 0.057181] printk: log_buf_len: 262144 bytes
[ 0.057182] printk: early log buf free: 112120(85%)
[ 0.060012] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.061457] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.061647] Fallback order for Node 0: 0
[ 0.061655] Built 1 zonelists, mobility grouping on. Total pages: 8237128
[ 0.061656] Policy zone: Normal
[ 0.061845] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.061879] software IO TLB: area num 32.
[ 0.127873] Memory: 32601184K/33472160K available (16384K kernel code, 2120K rwdata, 12780K rodata, 3348K init, 3984K bss, 870716K reserved, 0K cma-reserved)
[ 0.128000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.128027] ftrace: allocating 47559 entries in 186 pages
[ 0.134596] ftrace: allocated 186 pages with 5 groups
[ 0.134669] Dynamic Preempt: full
[ 0.134715] rcu: Preemptible hierarchical RCU implementation.
[ 0.134716] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[ 0.134717] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.134717] Trampoline variant of Tasks RCU enabled.
[ 0.134718] Rude variant of Tasks RCU enabled.
[ 0.134718] Tracing variant of Tasks RCU enabled.
[ 0.134719] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.134719] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.136749] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[ 0.136922] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.137009] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.137046] Console: colour dummy device 80x25
[ 0.137048] printk: console [tty0] enabled
[ 0.137088] ACPI: Core revision 20230331
[ 0.137210] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.137225] APIC: Switch to symmetric I/O mode setup
[ 0.138057] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[ 0.447743] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.447760] Switched APIC routing to physical flat.
[ 0.448367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.463882] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3b63a2cea64, max_idle_ns: 440795368681 ns
[ 0.463885] Calibrating delay loop (skipped), value calculated using timer frequency.. 8243.59 BogoMIPS (lpj=13733750)
[ 0.463898] Zenbleed: please update your microcode for the most optimal fix
[ 0.463899] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.463943] LVT offset 1 assigned for vector 0xf9
[ 0.464075] LVT offset 2 assigned for vector 0xf4
[ 0.464110] process: using mwait in idle threads
[ 0.464111] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.464112] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.464115] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.464116] Spectre V2 : Mitigation: Retpolines
[ 0.464117] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.464118] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.464118] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.464119] RETBleed: Mitigation: untrained return thunk
[ 0.464120] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.464121] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[ 0.464121] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.464122] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.464123] Speculative Return Stack Overflow: Mitigation: safe RET
[ 0.464127] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.464128] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.464129] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.464129] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.464130] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.480203] Freeing SMP alternatives memory: 40K
[ 0.480206] pid_max: default: 32768 minimum: 301
[ 0.482691] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.482709] landlock: Up and running.
[ 0.482711] Yama: becoming mindful.
[ 0.482715] LSM support for eBPF active
[ 0.482774] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.482813] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.592188] smpboot: CPU0: AMD Ryzen 9 3900X 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.592363] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.592365] cblist_init_generic: Setting shift to 5 and lim to 1.
[ 0.592385] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.592386] cblist_init_generic: Setting shift to 5 and lim to 1.
[ 0.592402] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.592403] cblist_init_generic: Setting shift to 5 and lim to 1.
[ 0.592417] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.592422] ... version: 0
[ 0.592423] ... bit width: 48
[ 0.592424] ... generic registers: 6
[ 0.592425] ... value mask: 0000ffffffffffff
[ 0.592427] ... max period: 00007fffffffffff
[ 0.592428] ... fixed-purpose events: 0
[ 0.592428] ... event mask: 000000000000003f
[ 0.592510] signal: max sigframe size: 1776
[ 0.592538] rcu: Hierarchical SRCU implementation.
[ 0.592539] rcu: Max phase no-delay instances is 1000.
[ 0.592907] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.593166] smp: Bringing up secondary CPUs ...
[ 0.593275] x86: Booting SMP configuration:
[ 0.593276] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12
[ 0.619592] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.619592] #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
[ 0.643924] smp: Brought up 1 node, 24 CPUs
[ 0.643924] smpboot: Max logical packages: 2
[ 0.643924] smpboot: Total of 24 processors activated (197845.25 BogoMIPS)
[ 0.648523] devtmpfs: initialized
[ 0.648523] x86/mm: Memory block size: 128MB
[ 0.652547] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a210fff] (69632 bytes)
[ 0.652547] ACPI: PM: Registering ACPI NVS region [mem 0xbc4a6000-0xbcba3fff] (7331840 bytes)
[ 0.652547] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.652547] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.652547] pinctrl core: initialized pinctrl subsystem
[ 0.652547] PM: RTC time: 18:14:12, date: 2023-09-07
[ 0.652547] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.652547] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.652547] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.652547] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.652547] audit: initializing netlink subsys (disabled)
[ 0.653903] audit: type=2000 audit(1694110452.209:1): state=initialized audit_enabled=0 res=1
[ 0.654013] thermal_sys: Registered thermal governor 'fair_share'
[ 0.654015] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.654016] thermal_sys: Registered thermal governor 'step_wise'
[ 0.654017] thermal_sys: Registered thermal governor 'user_space'
[ 0.654018] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.654037] cpuidle: using governor ladder
[ 0.654037] cpuidle: using governor menu
[ 0.654037] Detected 1 PCC Subspaces
[ 0.654037] Registering PCC driver as Mailbox controller
[ 0.654037] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.654064] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.654069] PCI: not using MMCONFIG
[ 0.654071] PCI: Using configuration type 1 for base access
[ 0.654072] PCI: Using configuration type 1 for extended access
[ 0.655012] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.655020] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.655020] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.655020] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.655020] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.655020] ACPI: Added _OSI(Module Device)
[ 0.655020] ACPI: Added _OSI(Processor Device)
[ 0.655020] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.655020] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.674434] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.677178] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.677781] ACPI: EC: EC started
[ 0.677781] ACPI: EC: interrupt blocked
[ 0.677781] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.677781] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[ 0.677781] ACPI: Interpreter enabled
[ 0.677781] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.677781] ACPI: Using IOAPIC for interrupt routing
[ 0.679507] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.679569] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
[ 0.679580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.679582] PCI: Using E820 reservations for host bridge windows
[ 0.680184] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.689506] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT3._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.689517] fbcon: Taking over console
[ 0.689648] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO11._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.689779] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT4._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.689911] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO12._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690040] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT5._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690170] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690299] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT6._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690429] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO14._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690561] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT1._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690691] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690821] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT2._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.690950] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO10._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691079] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT7._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691209] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO15._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691339] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT8._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691469] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO16._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691598] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO17._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691728] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO18._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691858] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO19._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.691990] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO20._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.692137] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO21._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.692270] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO22._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 0.700183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.700189] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.700352] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
[ 0.700659] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.700670] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.701406] PCI host bridge to bus 0000:00
[ 0.701408] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.701410] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.701412] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.701414] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
[ 0.701415] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.701417] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[ 0.701419] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.701421] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.701439] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.701558] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[ 0.701675] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.701744] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[ 0.701831] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.702007] pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
[ 0.702038] pci 0000:00:01.3: enabling Extended Tags
[ 0.702095] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.702325] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.702398] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.702466] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.702551] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.702726] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.702797] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.702868] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.702934] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.702960] pci 0000:00:07.1: enabling Extended Tags
[ 0.703003] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.703146] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.703213] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.703241] pci 0000:00:08.1: enabling Extended Tags
[ 0.703287] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.703451] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.703585] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.703737] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.703779] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.703820] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.703861] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.703906] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.703947] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.703988] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.704029] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.704166] pci 0000:01:00.0: [c0a9:540a] type 00 class 0x010802
[ 0.704224] pci 0000:01:00.0: reg 0x10: [mem 0xfc800000-0xfc803fff 64bit]
[ 0.705028] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.705034] pci 0000:00:01.1: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.705114] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330
[ 0.705134] pci 0000:02:00.0: reg 0x10: [mem 0xfc7a0000-0xfc7a7fff 64bit]
[ 0.705180] pci 0000:02:00.0: enabling Extended Tags
[ 0.705242] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.705437] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601
[ 0.705490] pci 0000:02:00.1: reg 0x24: [mem 0xfc780000-0xfc79ffff]
[ 0.705500] pci 0000:02:00.1: reg 0x30: [mem 0xfc700000-0xfc77ffff pref]
[ 0.705508] pci 0000:02:00.1: enabling Extended Tags
[ 0.705555] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.705664] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400
[ 0.705714] pci 0000:02:00.2: enabling Extended Tags
[ 0.705767] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.705909] pci 0000:00:01.3: PCI bridge to [bus 02-08]
[ 0.705913] pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
[ 0.705916] pci 0000:00:01.3: bridge window [mem 0xfc500000-0xfc7fffff]
[ 0.706067] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400
[ 0.706120] pci 0000:03:00.0: enabling Extended Tags
[ 0.706188] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.706334] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400
[ 0.706388] pci 0000:03:01.0: enabling Extended Tags
[ 0.706455] pci 0000:03:01.0: PME# supported from D3hot D3cold
[ 0.706602] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400
[ 0.706656] pci 0000:03:04.0: enabling Extended Tags
[ 0.706723] pci 0000:03:04.0: PME# supported from D3hot D3cold
[ 0.706872] pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400
[ 0.706925] pci 0000:03:06.0: enabling Extended Tags
[ 0.706993] pci 0000:03:06.0: PME# supported from D3hot D3cold
[ 0.707142] pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400
[ 0.707195] pci 0000:03:07.0: enabling Extended Tags
[ 0.707265] pci 0000:03:07.0: PME# supported from D3hot D3cold
[ 0.707426] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.707432] pci 0000:02:00.2: bridge window [io 0xe000-0xefff]
[ 0.707435] pci 0000:02:00.2: bridge window [mem 0xfc500000-0xfc6fffff]
[ 0.707535] pci 0000:04:00.0: [8086:1539] type 00 class 0x020000
[ 0.707569] pci 0000:04:00.0: reg 0x10: [mem 0xfc600000-0xfc61ffff]
[ 0.707605] pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 0.707624] pci 0000:04:00.0: reg 0x1c: [mem 0xfc620000-0xfc623fff]
[ 0.707818] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.708078] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.708085] pci 0000:03:00.0: bridge window [io 0xe000-0xefff]
[ 0.708088] pci 0000:03:00.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.708145] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.708208] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.708270] pci 0000:03:06.0: PCI bridge to [bus 07]
[ 0.708367] pci 0000:08:00.0: [8086:2723] type 00 class 0x028000
[ 0.708400] pci 0000:08:00.0: reg 0x10: [mem 0xfc500000-0xfc503fff 64bit]
[ 0.708571] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.708819] pci 0000:03:07.0: PCI bridge to [bus 08]
[ 0.708827] pci 0000:03:07.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.708924] pci 0000:09:00.0: [10de:1e07] type 00 class 0x030000
[ 0.708940] pci 0000:09:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.708953] pci 0000:09:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.708966] pci 0000:09:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.708975] pci 0000:09:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.708984] pci 0000:09:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
[ 0.709006] pci 0000:09:00.0: BAR 3: assigned to efifb
[ 0.709012] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.709065] pci 0000:09:00.0: PME# supported from D0 D3hot
[ 0.709153] pci 0000:09:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.709303] pci 0000:09:00.1: [10de:10f7] type 00 class 0x040300
[ 0.709319] pci 0000:09:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
[ 0.709485] pci 0000:09:00.2: [10de:1ad6] type 00 class 0x0c0330
[ 0.709504] pci 0000:09:00.2: reg 0x10: [mem 0xe2000000-0xe203ffff 64bit pref]
[ 0.709525] pci 0000:09:00.2: reg 0x1c: [mem 0xe2040000-0xe204ffff 64bit pref]
[ 0.709591] pci 0000:09:00.2: PME# supported from D0 D3hot
[ 0.709668] pci 0000:09:00.3: [10de:1ad7] type 00 class 0x0c8000
[ 0.709684] pci 0000:09:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff]
[ 0.709778] pci 0000:09:00.3: PME# supported from D0 D3hot
[ 0.709890] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.709895] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
[ 0.709898] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.709902] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.709953] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
[ 0.709983] pci 0000:0a:00.0: enabling Extended Tags
[ 0.710156] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.710228] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
[ 0.710264] pci 0000:0b:00.0: enabling Extended Tags
[ 0.710429] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
[ 0.710446] pci 0000:0b:00.1: reg 0x18: [mem 0xfc300000-0xfc3fffff]
[ 0.710459] pci 0000:0b:00.1: reg 0x24: [mem 0xfc408000-0xfc409fff]
[ 0.710468] pci 0000:0b:00.1: enabling Extended Tags
[ 0.710609] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.710624] pci 0000:0b:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
[ 0.710655] pci 0000:0b:00.3: enabling Extended Tags
[ 0.710705] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[ 0.710827] pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300
[ 0.710837] pci 0000:0b:00.4: reg 0x10: [mem 0xfc400000-0xfc407fff]
[ 0.710865] pci 0000:0b:00.4: enabling Extended Tags
[ 0.710912] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[ 0.711047] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.711053] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc4fffff]
[ 0.711743] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.711822] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.711893] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.711977] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.712055] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.712119] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.712183] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.712248] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.713334] ACPI: EC: interrupt unblocked
[ 0.713335] ACPI: EC: event unblocked
[ 0.713340] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.713341] ACPI: EC: GPE=0x2
[ 0.713343] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
[ 0.713345] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.713902] iommu: Default domain type: Translated
[ 0.713902] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.714096] SCSI subsystem initialized
[ 0.714105] libata version 3.00 loaded.
[ 0.714105] ACPI: bus type USB registered
[ 0.714105] usbcore: registered new interface driver usbfs
[ 0.714105] usbcore: registered new interface driver hub
[ 0.714105] usbcore: registered new device driver usb
[ 0.714105] pps_core: LinuxPPS API ver. 1 registered
[ 0.714105] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.714105] PTP clock support registered
[ 0.714105] EDAC MC: Ver: 3.0.0
[ 0.714105] efivars: Registered efivars operations
[ 0.714158] NetLabel: Initializing
[ 0.714160] NetLabel: domain hash size = 128
[ 0.714161] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.714181] NetLabel: unlabeled traffic allowed by default
[ 0.714187] mctp: management component transport protocol core
[ 0.714188] NET: Registered PF_MCTP protocol family
[ 0.714192] PCI: Using ACPI for IRQ routing
[ 0.718138] PCI: pci_cache_line_size set to 64 bytes
[ 0.718221] e820: reserve RAM buffer [mem 0x09c7f000-0x0bffffff]
[ 0.718223] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.718224] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.718226] e820: reserve RAM buffer [mem 0xad82c018-0xafffffff]
[ 0.718227] e820: reserve RAM buffer [mem 0xb125f018-0xb3ffffff]
[ 0.718228] e820: reserve RAM buffer [mem 0xb3a5e000-0xb3ffffff]
[ 0.718230] e820: reserve RAM buffer [mem 0xb6227000-0xb7ffffff]
[ 0.718231] e820: reserve RAM buffer [mem 0xb8e1f000-0xbbffffff]
[ 0.718232] e820: reserve RAM buffer [mem 0xbaabb000-0xbbffffff]
[ 0.718234] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.718235] e820: reserve RAM buffer [mem 0x83f300000-0x83fffffff]
[ 0.718308] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 0.718308] pci 0000:09:00.0: vgaarb: bridge control possible
[ 0.718308] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.718308] vgaarb: loaded
[ 0.718308] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.718308] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.720553] clocksource: Switched to clocksource tsc-early
[ 0.733381] VFS: Disk quotas dquot_6.6.0
[ 0.733397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.733475] pnp: PnP ACPI init
[ 0.733589] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.733722] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.734017] system 00:03: [io 0x02a0-0x02af] has been reserved
[ 0.734019] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.734021] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.734444] pnp 00:05: [dma 0 disabled]
[ 0.734814] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.734817] system 00:06: [io 0x040b] has been reserved
[ 0.734819] system 00:06: [io 0x04d6] has been reserved
[ 0.734821] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.734823] system 00:06: [io 0x0c14] has been reserved
[ 0.734824] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.734826] system 00:06: [io 0x0c52] has been reserved
[ 0.734828] system 00:06: [io 0x0c6c] has been reserved
[ 0.734830] system 00:06: [io 0x0c6f] has been reserved
[ 0.734832] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.734834] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.734835] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.734837] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.734839] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.734841] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.734843] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.734845] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.734848] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.734850] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.734852] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.734855] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.734857] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.735676] pnp: PnP ACPI: found 7 devices
[ 0.741617] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.741682] NET: Registered PF_INET protocol family
[ 0.741861] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.744117] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.744156] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.744325] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.744674] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.744773] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.744933] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.745006] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.745076] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.745168] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.745175] NET: Registered PF_XDP protocol family
[ 0.745189] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.745194] pci 0000:00:01.1: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.745201] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.745204] pci 0000:03:00.0: bridge window [io 0xe000-0xefff]
[ 0.745209] pci 0000:03:00.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.745218] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.745230] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.745242] pci 0000:03:06.0: PCI bridge to [bus 07]
[ 0.745254] pci 0000:03:07.0: PCI bridge to [bus 08]
[ 0.745259] pci 0000:03:07.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.745267] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.745270] pci 0000:02:00.2: bridge window [io 0xe000-0xefff]
[ 0.745275] pci 0000:02:00.2: bridge window [mem 0xfc500000-0xfc6fffff]
[ 0.745283] pci 0000:00:01.3: PCI bridge to [bus 02-08]
[ 0.745285] pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
[ 0.745289] pci 0000:00:01.3: bridge window [mem 0xfc500000-0xfc7fffff]
[ 0.745296] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.745298] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
[ 0.745301] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.745304] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.745309] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.745316] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.745320] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc4fffff]
[ 0.745325] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.745327] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.745329] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.745331] pci_bus 0000:00: resource 7 [io 0x0d00-0xefff window]
[ 0.745333] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.745334] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
[ 0.745336] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.745338] pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfc8fffff]
[ 0.745340] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.745341] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc7fffff]
[ 0.745343] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.745345] pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc6fffff]
[ 0.745346] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.745348] pci_bus 0000:04: resource 1 [mem 0xfc600000-0xfc6fffff]
[ 0.745350] pci_bus 0000:08: resource 1 [mem 0xfc500000-0xfc5fffff]
[ 0.745352] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
[ 0.745353] pci_bus 0000:09: resource 1 [mem 0xfb000000-0xfc0fffff]
[ 0.745355] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.745357] pci_bus 0000:0b: resource 1 [mem 0xfc200000-0xfc4fffff]
[ 0.745628] pci 0000:09:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.745657] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[ 0.745724] pci 0000:09:00.2: D0 power state depends on 0000:09:00.0
[ 0.745881] pci 0000:09:00.3: D0 power state depends on 0000:09:00.0
[ 0.746068] PCI: CLS 64 bytes, default 64
[ 0.746078] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.746118] Trying to unpack rootfs image as initramfs...
[ 0.746127] pci 0000:00:01.0: Adding to iommu group 0
[ 0.746147] pci 0000:00:01.1: Adding to iommu group 1
[ 0.746164] pci 0000:00:01.3: Adding to iommu group 2
[ 0.746189] pci 0000:00:02.0: Adding to iommu group 3
[ 0.746215] pci 0000:00:03.0: Adding to iommu group 4
[ 0.746235] pci 0000:00:03.1: Adding to iommu group 5
[ 0.746260] pci 0000:00:04.0: Adding to iommu group 6
[ 0.746285] pci 0000:00:05.0: Adding to iommu group 7
[ 0.746312] pci 0000:00:07.0: Adding to iommu group 8
[ 0.746341] pci 0000:00:07.1: Adding to iommu group 9
[ 0.746367] pci 0000:00:08.0: Adding to iommu group 10
[ 0.746386] pci 0000:00:08.1: Adding to iommu group 11
[ 0.746419] pci 0000:00:14.0: Adding to iommu group 12
[ 0.746437] pci 0000:00:14.3: Adding to iommu group 12
[ 0.746522] pci 0000:00:18.0: Adding to iommu group 13
[ 0.746540] pci 0000:00:18.1: Adding to iommu group 13
[ 0.746557] pci 0000:00:18.2: Adding to iommu group 13
[ 0.746577] pci 0000:00:18.3: Adding to iommu group 13
[ 0.746594] pci 0000:00:18.4: Adding to iommu group 13
[ 0.746611] pci 0000:00:18.5: Adding to iommu group 13
[ 0.746629] pci 0000:00:18.6: Adding to iommu group 13
[ 0.746646] pci 0000:00:18.7: Adding to iommu group 13
[ 0.746663] pci 0000:01:00.0: Adding to iommu group 14
[ 0.746705] pci 0000:02:00.0: Adding to iommu group 15
[ 0.746724] pci 0000:02:00.1: Adding to iommu group 15
[ 0.746743] pci 0000:02:00.2: Adding to iommu group 15
[ 0.746750] pci 0000:03:00.0: Adding to iommu group 15
[ 0.746755] pci 0000:03:01.0: Adding to iommu group 15
[ 0.746761] pci 0000:03:04.0: Adding to iommu group 15
[ 0.746766] pci 0000:03:06.0: Adding to iommu group 15
[ 0.746772] pci 0000:03:07.0: Adding to iommu group 15
[ 0.746777] pci 0000:04:00.0: Adding to iommu group 15
[ 0.746782] pci 0000:08:00.0: Adding to iommu group 15
[ 0.746833] pci 0000:09:00.0: Adding to iommu group 16
[ 0.746854] pci 0000:09:00.1: Adding to iommu group 16
[ 0.746874] pci 0000:09:00.2: Adding to iommu group 16
[ 0.746895] pci 0000:09:00.3: Adding to iommu group 16
[ 0.746912] pci 0000:0a:00.0: Adding to iommu group 17
[ 0.746930] pci 0000:0b:00.0: Adding to iommu group 18
[ 0.746949] pci 0000:0b:00.1: Adding to iommu group 19
[ 0.746967] pci 0000:0b:00.3: Adding to iommu group 20
[ 0.746986] pci 0000:0b:00.4: Adding to iommu group 21
[ 0.750876] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.750881] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[ 0.750888] AMD-Vi: Interrupt remapping enabled
[ 0.750997] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.750998] software IO TLB: mapped [mem 0x00000000a982c000-0x00000000ad82c000] (64MB)
[ 0.751064] LVT offset 0 assigned for vector 0x400
[ 0.751225] perf: AMD IBS detected (0x000003ff)
[ 0.751232] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.753933] Initialise system trusted keyrings
[ 0.753941] Key type blacklist registered
[ 0.753972] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.753992] zbud: loaded
[ 0.754164] integrity: Platform Keyring initialized
[ 0.754167] integrity: Machine keyring initialized
[ 0.756796] Key type asymmetric registered
[ 0.756797] Asymmetric key parser 'x509' registered
[ 0.756810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.756853] io scheduler mq-deadline registered
[ 0.756855] io scheduler kyber registered
[ 0.756862] io scheduler bfq registered
[ 0.757468] amd_gpio AMDI0030:00: Invalid config param 0014
[ 0.757732] pcieport 0000:00:01.1: AER: enabled with IRQ 27
[ 0.757888] pcieport 0000:00:01.3: AER: enabled with IRQ 28
[ 0.758046] pcieport 0000:00:03.1: AER: enabled with IRQ 29
[ 0.758275] pcieport 0000:00:07.1: AER: enabled with IRQ 31
[ 0.758407] pcieport 0000:00:08.1: AER: enabled with IRQ 32
[ 0.759338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.759489] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.759510] ACPI: button: Power Button [PWRB]
[ 0.759544] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.773920] ACPI: button: Power Button [PWRF]
[ 0.777260] Estimated ratio of average max frequency by base frequency (times 1024): 1141
[ 0.780031] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.780185] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.783105] Non-volatile memory driver v1.3
[ 0.783107] Linux agpgart interface v0.103
[ 0.834487] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.834515] ACPI: bus type drm_connector registered
[ 0.836104] ahci 0000:02:00.1: version 3.0
[ 0.836235] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.836278] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.836281] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.836835] scsi host0: ahci
[ 0.836951] scsi host1: ahci
[ 0.837045] scsi host2: ahci
[ 0.837144] scsi host3: ahci
[ 0.837235] scsi host4: ahci
[ 0.837326] scsi host5: ahci
[ 0.837417] scsi host6: ahci
[ 0.837512] scsi host7: ahci
[ 0.837556] ata1: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780100 irq 40
[ 0.837558] ata2: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780180 irq 40
[ 0.837560] ata3: DUMMY
[ 0.837561] ata4: DUMMY
[ 0.837562] ata5: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780300 irq 40
[ 0.837565] ata6: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780380 irq 40
[ 0.837566] ata7: DUMMY
[ 0.837567] ata8: DUMMY
[ 0.837669] usbcore: registered new interface driver usbserial_generic
[ 0.837674] usbserial: USB Serial support registered for generic
[ 0.837735] rtc_cmos 00:02: RTC can wake from S4
[ 0.837958] rtc_cmos 00:02: registered as rtc0
[ 0.837986] rtc_cmos 00:02: setting system clock to 2023-09-07T18:14:12 UTC (1694110452)
[ 0.838014] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.838054] amd_pstate: driver load is disabled, boot with specific mode to enable this
[ 0.838239] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.838480] efifb: probing for efifb
[ 0.838489] efifb: framebuffer at 0xe1000000, using 3072k, total 3072k
[ 0.838491] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.838492] efifb: scrolling: redraw
[ 0.838493] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.838580] Console: switching to colour frame buffer device 128x48
[ 0.839596] fb0: EFI VGA frame buffer device
[ 0.839621] hid: raw HID events driver (C) Jiri Kosina
[ 0.839726] drop_monitor: Initializing network drop monitor service
[ 0.852117] Initializing XFRM netlink socket
[ 0.852147] NET: Registered PF_INET6 protocol family
[ 1.008384] Freeing initrd memory: 107276K
[ 1.013482] Segment Routing with IPv6
[ 1.013484] RPL Segment Routing with IPv6
[ 1.013492] In-situ OAM (IOAM) with IPv6
[ 1.013515] NET: Registered PF_PACKET protocol family
[ 1.015184] microcode: CPU0: patch_level=0x08701021
[ 1.015184] microcode: CPU2: patch_level=0x08701021
[ 1.015184] microcode: CPU3: patch_level=0x08701021
[ 1.015185] microcode: CPU4: patch_level=0x08701021
[ 1.015185] microcode: CPU5: patch_level=0x08701021
[ 1.015184] microcode: CPU6: patch_level=0x08701021
[ 1.015184] microcode: CPU1: patch_level=0x08701021
[ 1.015188] microcode: CPU9: patch_level=0x08701021
[ 1.015187] microcode: CPU8: patch_level=0x08701021
[ 1.015188] microcode: CPU10: patch_level=0x08701021
[ 1.015190] microcode: CPU11: patch_level=0x08701021
[ 1.015192] microcode: CPU13: patch_level=0x08701021
[ 1.015193] microcode: CPU12: patch_level=0x08701021
[ 1.015195] microcode: CPU15: patch_level=0x08701021
[ 1.015196] microcode: CPU16: patch_level=0x08701021
[ 1.015195] microcode: CPU14: patch_level=0x08701021
[ 1.015197] microcode: CPU18: patch_level=0x08701021
[ 1.015197] microcode: CPU17: patch_level=0x08701021
[ 1.015199] microcode: CPU20: patch_level=0x08701021
[ 1.015199] microcode: CPU19: patch_level=0x08701021
[ 1.015200] microcode: CPU7: patch_level=0x08701021
[ 1.015200] microcode: CPU21: patch_level=0x08701021
[ 1.015201] microcode: CPU22: patch_level=0x08701021
[ 1.015203] microcode: CPU23: patch_level=0x08701021
[ 1.015259] microcode: Microcode Update Driver: v2.2.
[ 1.015482] resctrl: L3 allocation detected
[ 1.015484] resctrl: MB allocation detected
[ 1.015485] resctrl: L3 monitoring detected
[ 1.015488] IPI shorthand broadcast: enabled
[ 1.017623] sched_clock: Marking stable (709595784, 306936412)->(1213261218, -196729022)
[ 1.017741] registered taskstats version 1
[ 1.018299] Loading compiled-in X.509 certificates
[ 1.020978] Loaded X.509 cert 'Build time autogenerated kernel key: 333e1bae8548937ea28bdd550a94d2aba8351419'
[ 1.024891] zswap: loaded using pool zstd/zsmalloc
[ 1.027064] Key type .fscrypt registered
[ 1.027066] Key type fscrypt-provisioning registered
[ 1.027185] integrity: Loading X.509 certificate: UEFI:db
[ 1.027371] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 1.027372] integrity: Loading X.509 certificate: UEFI:db
[ 1.027499] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 1.027500] integrity: Loading X.509 certificate: UEFI:db
[ 1.027516] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.027517] integrity: Loading X.509 certificate: UEFI:db
[ 1.027539] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.027541] integrity: Loading X.509 certificate: UEFI:db
[ 1.027672] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.028715] PM: Magic number: 7:621:240
[ 1.028821] memory memory118: hash matches
[ 1.135500] RAS: Correctable Errors collector initialized.
[ 1.135620] clk: Disabling unused clocks
[ 1.317012] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.317705] ata1.00: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
[ 1.317898] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.318973] ata1.00: configured for UDMA/133
[ 1.319082] scsi 0:0:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
[ 1.319400] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.319403] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.319416] sd 0:0:0:0: [sda] Write Protect is off
[ 1.319419] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.319436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.319460] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 1.398074] sda: sda1
[ 1.398140] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.776947] tsc: Refined TSC clocksource calibration: 4119.999 MHz
[ 1.776957] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3b632b1e1b4, max_idle_ns: 440795313890 ns
[ 1.776991] clocksource: Switched to clocksource tsc
[ 1.793618] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.821566] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 1.830661] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.890137] ata2.00: configured for UDMA/133
[ 1.890215] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 1.890490] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.890493] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.890505] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.890508] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.890525] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.890550] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.931628] sdb: sdb1
[ 1.931688] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.203097] ata5: SATA link down (SStatus 0 SControl 330)
[ 2.516431] ata6: SATA link down (SStatus 0 SControl 330)
[ 2.517878] Freeing unused decrypted memory: 2036K
[ 2.518361] Freeing unused kernel image (initmem) memory: 3348K
[ 2.518366] Write protecting the kernel read-only data: 30720k
[ 2.518803] Freeing unused kernel image (rodata/data gap) memory: 1556K
[ 2.577380] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.577384] rodata_test: all tests were successful
[ 2.577388] Run /init as init process
[ 2.577389] with arguments:
[ 2.577391] /init
[ 2.577392] with environment:
[ 2.577393] HOME=/
[ 2.577394] TERM=linux
[ 2.577395] cryptdevice=UUID=22033c1d-a669-4c10-a8dc-05339ae4c447:cryptlvm:allow-discards
[ 2.637069] nvidia: loading out-of-tree module taints kernel.
[ 2.637079] nvidia: module license 'NVIDIA' taints kernel.
[ 2.637080] Disabling lock debugging due to kernel taint
[ 2.637083] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.637084] nvidia: module license taints kernel.
[ 3.160165] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[ 3.161425] nvidia 0000:09:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.278129] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 535.104.05 Sat Aug 19 01:15:15 UTC 2023
[ 3.304324] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 535.104.05 Sat Aug 19 00:59:57 UTC 2023
[ 3.306700] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 3.475958] nvidia-uvm: Loaded the UVM driver, major device number 236.
[ 3.477764] [drm] [nvidia-drm] [GPU ID 0x00000900] Loading driver
[ 5.195622] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:09:00.0 on minor 0
[ 5.360024] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 5.360027] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.360173] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.361953] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 5.361961] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 5.368534] cryptd: max_cpu_qlen set to 1000
[ 5.368583] ccp 0000:0b:00.1: enabling device (0000 -> 0002)
[ 5.368768] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[ 5.368797] ccp 0000:0b:00.1: psp enabled
[ 5.372083] nvme nvme0: pci function 0000:01:00.0
[ 5.377548] nvme nvme0: missing or invalid SUBNQN field.
[ 5.381134] AVX2 version of gcm_enc/dec engaged.
[ 5.381215] AES CTR mode by8 optimization enabled
[ 5.403692] nvme nvme0: allocated 32 MiB host memory buffer.
[ 5.417324] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[ 5.417574] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 5.417578] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 5.417582] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 5.417653] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 5.417656] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.417658] usb usb1: Product: xHCI Host Controller
[ 5.417660] usb usb1: Manufacturer: Linux 6.4.12-arch1-1 xhci-hcd
[ 5.417662] usb usb1: SerialNumber: 0000:02:00.0
[ 5.417837] hub 1-0:1.0: USB hub found
[ 5.417854] hub 1-0:1.0: 10 ports detected
[ 5.417969] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT5._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418084] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT5._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418195] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT6._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418301] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT6._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418410] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT7._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418518] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT7._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418627] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT8._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418733] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT8._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418841] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.418948] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.419795] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO10._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.420658] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO10._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.421528] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO11._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.422407] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO11._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.423302] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO12._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.424215] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO12._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.425141] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.426076] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.427031] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO14._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.427992] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO14._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.429076] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.429100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[ 5.429102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.429104] usb usb2: Product: xHCI Host Controller
[ 5.429106] usb usb2: Manufacturer: Linux 6.4.12-arch1-1 xhci-hcd
[ 5.429107] usb usb2: SerialNumber: 0000:02:00.0
[ 5.429191] hub 2-0:1.0: USB hub found
[ 5.429200] hub 2-0:1.0: 4 ports detected
[ 5.429295] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT1._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.430295] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT1._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.431331] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT2._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.432364] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT2._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.433432] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT3._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.434505] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT3._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.435290] nvme nvme0: 8/0/0 default/read/poll queues
[ 5.435570] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT4._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.436626] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT4._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.437815] xhci_hcd 0000:09:00.2: xHCI Host Controller
[ 5.437819] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 3
[ 5.438261] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 5.438423] xhci_hcd 0000:09:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[ 5.438554] xhci_hcd 0000:09:00.2: xHCI Host Controller
[ 5.438557] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 4
[ 5.438560] xhci_hcd 0000:09:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[ 5.438604] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 5.438606] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.438608] usb usb3: Product: xHCI Host Controller
[ 5.438610] usb usb3: Manufacturer: Linux 6.4.12-arch1-1 xhci-hcd
[ 5.438611] usb usb3: SerialNumber: 0000:09:00.2
[ 5.438693] hub 3-0:1.0: USB hub found
[ 5.438700] hub 3-0:1.0: 2 ports detected
[ 5.438800] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.438823] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[ 5.438825] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.438826] usb usb4: Product: xHCI Host Controller
[ 5.438828] usb usb4: Manufacturer: Linux 6.4.12-arch1-1 xhci-hcd
[ 5.438829] usb usb4: SerialNumber: 0000:09:00.2
[ 5.438914] hub 4-0:1.0: USB hub found
[ 5.438922] hub 4-0:1.0: 4 ports detected
[ 5.439141] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 5.439145] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
[ 5.439248] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 5.439589] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 5.439592] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
[ 5.439594] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 5.439627] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 5.439629] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.439631] usb usb5: Product: xHCI Host Controller
[ 5.439632] usb usb5: Manufacturer: Linux 6.4.12-arch1-1 xhci-hcd
[ 5.439634] usb usb5: SerialNumber: 0000:0b:00.3
[ 5.439712] hub 5-0:1.0: USB hub found
[ 5.439720] hub 5-0:1.0: 4 ports detected
[ 5.439842] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.439865] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[ 5.439867] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.439869] usb usb6: Product: xHCI Host Controller
[ 5.439870] usb usb6: Manufacturer: Linux 6.4.12-arch1-1 xhci-hcd
[ 5.439872] usb usb6: SerialNumber: 0000:0b:00.3
[ 5.439947] hub 6-0:1.0: USB hub found
[ 5.439954] hub 6-0:1.0: 4 ports detected
[ 5.440076] nvme0n1: p1 p2 p3 p4 p5
[ 5.474588] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 5.576613] device-mapper: uevent: version 1.0.3
[ 5.576676] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 5.586708] Key type trusted registered
[ 5.596284] Key type encrypted registered
[ 5.680276] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 5.696941] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 5.839361] usb 5-2: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[ 5.839364] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.839367] usb 5-2: SerialNumber: F4010089FD1A
[ 5.887767] hub 5-2:1.0: USB hub found
[ 5.888112] hub 5-2:1.0: 4 ports detected
[ 5.960362] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 5.977163] usb 6-2: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
[ 5.977166] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.998487] usb 1-5: New USB device found, idVendor=046d, idProduct=c547, bcdDevice= 4.02
[ 5.998490] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.998492] usb 1-5: Product: USB Receiver
[ 5.998494] usb 1-5: Manufacturer: Logitech
[ 5.998619] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 5.999696] hub 6-2:1.0: USB hub found
[ 5.999718] hub 6-2:1.0: 4 ports detected
[ 6.013287] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 6.014291] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 6.015284] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.POT9._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 6.026345] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5:1.0/0003:046D:C547.0001/input/input3
[ 6.026407] hid-generic 0003:046D:C547.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.0-5/input0
[ 6.033475] input: Logitech USB Receiver Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5:1.1/0003:046D:C547.0002/input/input4
[ 6.087098] hid-generic 0003:046D:C547.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:02:00.0-5/input1
[ 6.093379] hid-generic 0003:046D:C547.0003: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-5/input2
[ 6.093403] usbcore: registered new interface driver usbhid
[ 6.093404] usbhid: USB HID core driver
[ 6.140275] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 6.230276] usb 5-2.4: new full-speed USB device number 3 using xhci_hcd
[ 6.342621] usb 5-2.4: New USB device found, idVendor=043e, idProduct=9a39, bcdDevice= 4.17
[ 6.342624] usb 5-2.4: New USB device strings: Mfr=1, Product=3, SerialNumber=4
[ 6.342626] usb 5-2.4: Product: LG Monitor Controls
[ 6.342628] usb 5-2.4: Manufacturer: LG Electronics Inc.
[ 6.342630] usb 5-2.4: SerialNumber: 110MXNU1D711
[ 6.443773] hid-generic 0003:043E:9A39.0004: hiddev97,hidraw3: USB HID v1.11 Device [LG Electronics Inc. LG Monitor Controls] on usb-0000:0b:00.3-2.4/input0
[ 6.467566] usb 1-9: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[ 6.467569] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.467675] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 6.482358] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 6.483378] ACPI Error: Aborting method \_SB.PCI0.GPP2.PTXH.RHUB.PO13._PLD due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20230331/psparse-529)
[ 13.027196] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 13.029588] XFS (dm-1): Mounting V5 Filesystem 3702ada8-4dbe-463b-a6a6-928d5c4069d7
[ 13.042477] XFS (dm-1): Ending clean mount
[ 13.293993] systemd[1]: systemd 254.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 13.293998] systemd[1]: Detected architecture x86-64.
[ 13.298582] systemd[1]: Hostname set to <Reimu>.
[ 13.467809] systemd[1]: bpf-lsm: LSM BPF program attached
[ 13.624956] systemd[1]: Configuration file /etc/systemd/system/pritunl-client.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 13.625533] systemd[1]: Queued start job for default target Graphical Interface.
[ 13.651091] systemd[1]: Created slice Slice /system/getty.
[ 13.651918] systemd[1]: Created slice Slice /system/modprobe.
[ 13.652577] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 13.653195] systemd[1]: Created slice User and Session Slice.
[ 13.653655] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.654094] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.654616] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.655028] systemd[1]: Reached target Local Encrypted Volumes.
[ 13.655412] systemd[1]: Reached target Login Prompts.
[ 13.655787] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 13.656160] systemd[1]: Reached target Path Units.
[ 13.656521] systemd[1]: Reached target Remote File Systems.
[ 13.656874] systemd[1]: Reached target Slice Units.
[ 13.657229] systemd[1]: Reached target Swaps.
[ 13.657567] systemd[1]: Reached target Local Verity Protected Volumes.
[ 13.657942] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.658918] systemd[1]: Listening on LVM2 poll daemon socket.
[ 13.660184] systemd[1]: Listening on Process Core Dump Socket.
[ 13.660607] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.661001] systemd[1]: Listening on Journal Socket.
[ 13.661994] systemd[1]: Listening on udev Control Socket.
[ 13.662378] systemd[1]: Listening on udev Kernel Socket.
[ 13.663445] systemd[1]: Mounting Huge Pages File System...
[ 13.664528] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.665609] systemd[1]: Mounting Kernel Debug File System...
[ 13.666727] systemd[1]: Mounting Kernel Trace File System...
[ 13.667821] systemd[1]: Mounting Temporary Directory /tmp...
[ 13.668983] systemd[1]: Starting Create List of Static Device Nodes...
[ 13.670044] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 13.671209] systemd[1]: Starting Load Kernel Module configfs...
[ 13.672331] systemd[1]: Starting Load Kernel Module dm_mod...
[ 13.673479] systemd[1]: Starting Load Kernel Module drm...
[ 13.674622] systemd[1]: Starting Load Kernel Module fuse...
[ 13.675721] systemd[1]: Starting Load Kernel Module loop...
[ 13.676041] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 13.677391] systemd[1]: Starting Journal Service...
[ 13.678780] systemd[1]: Starting Load Kernel Modules...
[ 13.679057] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 13.679844] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.680883] systemd[1]: Starting Coldplug All udev Devices...
[ 13.682277] systemd[1]: Mounted Huge Pages File System.
[ 13.682566] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.682845] systemd[1]: Mounted Kernel Debug File System.
[ 13.683118] systemd[1]: Mounted Kernel Trace File System.
[ 13.683391] systemd[1]: Mounted Temporary Directory /tmp.
[ 13.692174] loop: module loaded
[ 13.697923] fuse: init (API version 7.38)
[ 13.704122] systemd-journald[628]: Collecting audit messages is disabled.
[ 13.740438] systemd[1]: Finished Create List of Static Device Nodes.
[ 13.741369] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 13.751136] vboxdrv: Found 24 processor cores/threads
[ 13.777081] vboxdrv: TSC mode is Invariant, tentative frequency 4119998430 Hz
[ 13.777083] vboxdrv: Successfully loaded version 7.0.10 r158379 (interface 0x00330004)
[ 13.779956] VBoxNetAdp: Successfully started.
[ 13.786143] VBoxNetFlt: Successfully started.
[ 13.787132] systemd[1]: Finished Load Kernel Module configfs.
[ 13.787493] systemd[1]: Started Journal Service.
[ 14.059048] systemd-journald[628]: Received client request to flush runtime journal.
[ 14.098813] systemd-journald[628]: /var/log/journal/bdec253ed33a46b0aa2a8cbb8f631cae/system.journal: Boot ID changed since last record, rotating.
[ 14.098816] systemd-journald[628]: Rotating system journal.
[ 14.364881] acpi_cpufreq: overriding BIOS provided _PSD data
[ 14.371131] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 14.371136] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 14.375159] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.376043] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.376049] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 14.376144] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 14.420469] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 14.424115] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 14.426857] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 14.502237] dca service started, version 1.12.1
[ 14.502277] raid6: skipped pq benchmark and selected avx2x4
[ 14.502282] raid6: using avx2x2 recovery algorithm
[ 14.532642] xor: measuring software checksum speed
[ 14.533188] prefetch64-sse : 18162 MB/sec
[ 14.533780] generic_sse : 16869 MB/sec
[ 14.533782] xor: using function: prefetch64-sse (18162 MB/sec)
[ 14.534101] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.534314] asus_wmi: ASUS WMI generic driver loaded
[ 14.534336] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.534678] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 14.534682] cfg80211: failed to load regulatory.db
[ 14.536327] kvm_amd: TSC scaling supported
[ 14.536329] kvm_amd: Nested Virtualization enabled
[ 14.536331] kvm_amd: Nested Paging enabled
[ 14.536334] kvm_amd: SEV supported: 509 ASIDs
[ 14.536366] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 14.536367] kvm_amd: Virtual GIF supported
[ 14.536368] kvm_amd: LBR virtualization supported
[ 14.542206] asus_wmi: Initialization: 0x0
[ 14.543503] asus_wmi: BIOS WMI version: 0.9
[ 14.544899] asus_wmi: SFUN value: 0x0
[ 14.544905] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 14.552098] MCE: In-kernel MCE decoding enabled.
[ 14.552127] igb: Intel(R) Gigabit Ethernet Network Driver
[ 14.552130] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 14.555241] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 14.565831] Intel(R) Wireless WiFi driver for Linux
[ 14.565898] iwlwifi 0000:08:00.0: enabling device (0000 -> 0002)
[ 14.569878] iwlwifi 0000:08:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
[ 14.569885] iwlwifi 0000:08:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100
[ 14.569980] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-cc-a0-78.ucode failed with error -2
[ 14.572182] ntfs3: Max link count 4000
[ 14.572187] ntfs3: Enabled Linux POSIX ACLs support
[ 14.572189] ntfs3: Read-only LZX/Xpress compression included
[ 14.572542] mousedev: PS/2 mouse device common for all mice
[ 14.584082] pps pps0: new PPS source ptp0
[ 14.584118] igb 0000:04:00.0: added PHC on eth0
[ 14.584120] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 14.584122] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:9d:92:88:c7:21
[ 14.584124] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
[ 14.584126] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 14.588773] igb 0000:04:00.0 enp4s0: renamed from eth0
[ 14.604905] iwlwifi 0000:08:00.0: api flags index 2 larger than supported by driver
[ 14.604923] iwlwifi 0000:08:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 14.605267] iwlwifi 0000:08:00.0: loaded firmware version 77.2df8986f.0 cc-a0-77.ucode op_mode iwlmvm
[ 14.683826] intel_rapl_common: Found RAPL domain package
[ 14.683829] intel_rapl_common: Found RAPL domain core
[ 14.683972] snd_hda_intel 0000:09:00.1: Disabling MSI
[ 14.683985] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
[ 14.684101] snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002)
[ 14.685720] Btrfs loaded, zoned=yes, fsverity=yes
[ 14.707984] Bluetooth: Core ver 2.22
[ 14.708005] NET: Registered PF_BLUETOOTH protocol family
[ 14.708007] Bluetooth: HCI device and connection manager initialized
[ 14.708010] Bluetooth: HCI socket layer initialized
[ 14.708012] Bluetooth: L2CAP socket layer initialized
[ 14.708016] Bluetooth: SCO socket layer initialized
[ 14.708807] BTRFS: device label hard devid 1 transid 172623 /dev/sda1 scanned by (udev-worker) (720)
[ 14.752332] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input7
[ 14.752412] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input8
[ 14.752482] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input9
[ 14.752547] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input10
[ 14.763091] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 14.763096] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.763099] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.763101] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 14.763103] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 14.763104] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 14.763106] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 14.763108] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 14.763109] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 14.775272] usbcore: registered new interface driver btusb
[ 14.776506] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input11
[ 14.776586] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input12
[ 14.776672] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input13
[ 14.776736] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input14
[ 14.776789] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input15
[ 14.776845] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input16
[ 14.776892] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input17
[ 14.780386] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[ 14.785358] Bluetooth: hci0: Device revision is 1
[ 14.785360] Bluetooth: hci0: Secure boot is enabled
[ 14.785361] Bluetooth: hci0: OTP lock is enabled
[ 14.785362] Bluetooth: hci0: API lock is enabled
[ 14.785364] Bluetooth: hci0: Debug lock is disabled
[ 14.785365] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 14.789190] iwlwifi 0000:08:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[ 14.789257] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 14.801557] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[ 14.801573] Bluetooth: hci0: Boot Address: 0x24800
[ 14.801575] Bluetooth: hci0: Firmware Version: 206-22.23
[ 14.831127] BTRFS info (device sda1): using crc32c (crc32c-intel) checksum algorithm
[ 14.831134] BTRFS info (device sda1): using free space tree
[ 14.913096] iwlwifi 0000:08:00.0: Detected RF HR B3, rfid=0x10a100
[ 14.978617] iwlwifi 0000:08:00.0: base HW address: 60:f2:62:10:ef:c3
[ 14.997266] iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
[ 19.619427] Bluetooth: hci0: Waiting for firmware download to complete
[ 19.620122] Bluetooth: hci0: Firmware loaded in 4705628 usecs
[ 19.620186] Bluetooth: hci0: Waiting for device to boot
[ 19.637126] Bluetooth: hci0: Device booted in 16557 usecs
[ 19.637128] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[ 19.639168] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[ 19.647968] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 19.652973] Bluetooth: hci0: Firmware revision 0.3 build 206 week 22 2023
[ 20.907934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.907939] Bluetooth: BNEP filters: protocol multicast
[ 20.907943] Bluetooth: BNEP socket layer initialized
[ 20.909152] Bluetooth: MGMT ver 1.22
[ 20.917628] NET: Registered PF_ALG protocol family
[ 21.771034] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1049 'Xorg'
[ 24.347513] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 24.560528] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 31.607209] systemd-journald[628]: /var/log/journal/bdec253ed33a46b0aa2a8cbb8f631cae/user-1000.journal: Boot ID changed since last record, rotating.
[ 33.880066] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 34.282074] Bluetooth: RFCOMM TTY layer initialized
[ 34.282085] Bluetooth: RFCOMM socket layer initialized
[ 34.282089] Bluetooth: RFCOMM ver 1.11
[ 870.448770] loop0: detected capacity change from 0 to 354418688
[ 4964.869217] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 4964.869226] ata1.00: irq_stat 0x40000001
[ 4964.869229] ata1.00: failed command: FLUSH CACHE EXT
[ 4964.869230] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 23
res 53/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 4964.869237] ata1.00: status: { DRDY SENSE ERR }
[ 4964.869239] ata1.00: error: { ABRT }
[ 4964.869574] ata1.00: revalidation failed (errno=-2)
[ 4964.869577] ata1: hard resetting link
[ 4965.342372] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4965.342745] ata1.00: revalidation failed (errno=-2)
[ 4970.522364] ata1: hard resetting link
[ 4970.995708] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4970.996061] ata1.00: revalidation failed (errno=-2)
[ 4970.996066] ata1.00: disable device
[ 4970.996090] ata1: EH complete
[ 4970.996117] sd 0:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=9s
[ 4970.996134] sd 0:0:0:0: [sda] tag#16 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 4970.996143] I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[ 4970.996159] BTRFS error (device sda1): bdev /dev/sda1 errs: wr 0, rd 0, flush 1, corrupt 0, gen 0
[ 4970.996167] BTRFS warning (device sda1): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount
[ 4970.996170] BTRFS: error (device sda1) in write_all_supers:4280: errno=-5 IO failure (errors while submitting device barriers.)
[ 4970.996174] BTRFS info (device sda1: state E): forced readonly
[ 4970.996177] BTRFS warning (device sda1: state E): Skipping commit of aborted transaction.
[ 4970.996179] BTRFS: error (device sda1: state EA) in cleanup_transaction:1984: errno=-5 IO failure
[ 5198.867637] sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5198.867645] sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 34 41 0d 70 00 00 20 00
[ 5198.867647] I/O error, dev sda, sector 876678512 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[ 5198.867692] sd 0:0:0:0: [sda] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5198.867694] sd 0:0:0:0: [sda] tag#18 CDB: Read(10) 28 00 34 41 0d 70 00 00 08 00
[ 5198.867695] I/O error, dev sda, sector 876678512 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 5198.867699] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 1, flush 1, corrupt 0, gen 0
[ 5200.924448] sd 0:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5200.924455] sd 0:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 3f b5 39 80 00 00 20 00
[ 5200.924457] I/O error, dev sda, sector 1068841344 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5200.924462] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 2, flush 1, corrupt 0, gen 0
[ 5200.924491] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5200.924493] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 3f d5 39 80 00 00 20 00
[ 5200.924494] I/O error, dev sda, sector 1070938496 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5200.924497] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 3, flush 1, corrupt 0, gen 0
[ 5201.369024] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5201.369031] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 3f b5 39 80 00 00 20 00
[ 5201.369032] I/O error, dev sda, sector 1068841344 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5201.369039] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 4, flush 1, corrupt 0, gen 0
[ 5201.369067] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5201.369069] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 3f d5 39 80 00 00 20 00
[ 5201.369070] I/O error, dev sda, sector 1070938496 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5201.369073] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 5, flush 1, corrupt 0, gen 0
[ 5201.736288] sd 0:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5201.736297] sd 0:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 3f b5 39 80 00 00 20 00
[ 5201.736299] I/O error, dev sda, sector 1068841344 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5201.736306] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 6, flush 1, corrupt 0, gen 0
[ 5201.736337] sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5201.736340] sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 3f d5 39 80 00 00 20 00
[ 5201.736341] I/O error, dev sda, sector 1070938496 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5201.736345] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 7, flush 1, corrupt 0, gen 0
[ 5202.131054] sd 0:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5202.131061] sd 0:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 00 08 80 80 00 00 20 00
[ 5202.131062] I/O error, dev sda, sector 557184 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5202.131069] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 8, flush 1, corrupt 0, gen 0
[ 5202.131101] sd 0:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5202.131103] sd 0:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 00 28 80 80 00 00 20 00
[ 5202.131104] I/O error, dev sda, sector 2654336 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5202.131107] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 9, flush 1, corrupt 0, gen 0
[ 5202.131121] BTRFS error (device sda1: state EA): error loading props for ino 906494 (root 5): -5
[ 5202.131140] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 10, flush 1, corrupt 0, gen 0
[ 5207.905614] scsi_io_completion_action: 30 callbacks suppressed
[ 5207.905622] sd 0:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.905636] sd 0:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 3f b2 3f 60 00 00 20 00
[ 5207.905638] blk_print_req_error: 30 callbacks suppressed
[ 5207.905639] I/O error, dev sda, sector 1068646240 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.905645] btrfs_dev_stat_inc_and_print: 29 callbacks suppressed
[ 5207.905647] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 40, flush 1, corrupt 0, gen 0
[ 5207.905678] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.905681] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 3f d2 3f 60 00 00 20 00
[ 5207.905682] I/O error, dev sda, sector 1070743392 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.905685] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 41, flush 1, corrupt 0, gen 0
[ 5207.905783] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.905785] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 3f b4 0b 60 00 00 20 00
[ 5207.905786] I/O error, dev sda, sector 1068764000 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.905789] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 42, flush 1, corrupt 0, gen 0
[ 5207.905815] sd 0:0:0:0: [sda] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.905817] sd 0:0:0:0: [sda] tag#29 CDB: Read(10) 28 00 3f d4 0b 60 00 00 20 00
[ 5207.905818] I/O error, dev sda, sector 1070861152 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.905821] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 43, flush 1, corrupt 0, gen 0
[ 5207.905936] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.905941] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 3f b4 0b 60 00 00 20 00
[ 5207.905942] I/O error, dev sda, sector 1068764000 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.905947] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 44, flush 1, corrupt 0, gen 0
[ 5207.905970] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.905973] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 3f d4 0b 60 00 00 20 00
[ 5207.905974] I/O error, dev sda, sector 1070861152 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.905977] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 45, flush 1, corrupt 0, gen 0
[ 5207.906047] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.906049] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 3f b4 09 60 00 00 20 00
[ 5207.906051] I/O error, dev sda, sector 1068763488 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.906053] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 46, flush 1, corrupt 0, gen 0
[ 5207.906074] sd 0:0:0:0: [sda] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.906076] sd 0:0:0:0: [sda] tag#30 CDB: Read(10) 28 00 3f d4 09 60 00 00 20 00
[ 5207.906078] I/O error, dev sda, sector 1070860640 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.906080] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 47, flush 1, corrupt 0, gen 0
[ 5207.906151] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.906153] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 64 14 6f a0 00 00 20 00
[ 5207.906154] I/O error, dev sda, sector 1679060896 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.906157] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 48, flush 1, corrupt 0, gen 0
[ 5207.906176] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5207.906178] sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 64 34 6f a0 00 00 20 00
[ 5207.906180] I/O error, dev sda, sector 1681158048 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5207.906182] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 49, flush 1, corrupt 0, gen 0
[ 5212.178814] Buffer I/O error on dev sda, logical block 0, async page read
[ 5212.178832] Buffer I/O error on dev sda, logical block 0, async page read
[ 5222.962986] scsi_io_completion_action: 79 callbacks suppressed
[ 5222.962995] sd 0:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5222.963001] sd 0:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 34 41 0d 70 00 00 08 00
[ 5222.963002] blk_print_req_error: 79 callbacks suppressed
[ 5222.963003] I/O error, dev sda, sector 876678512 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 5222.963010] btrfs_dev_stat_inc_and_print: 72 callbacks suppressed
[ 5222.963011] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 122, flush 1, corrupt 0, gen 0
[ 5241.688644] sd 0:0:0:0: [sda] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5241.688652] sd 0:0:0:0: [sda] tag#31 CDB: Read(10) 28 00 64 4b 7b 80 00 00 20 00
[ 5241.688654] I/O error, dev sda, sector 1682668416 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5241.688660] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 123, flush 1, corrupt 0, gen 0
[ 5241.688690] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5241.688693] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 64 6b 7b 80 00 00 20 00
[ 5241.688694] I/O error, dev sda, sector 1684765568 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5241.688696] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 124, flush 1, corrupt 0, gen 0
[ 5241.688750] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5241.688752] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 64 4b 7b 80 00 00 20 00
[ 5241.688754] I/O error, dev sda, sector 1682668416 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5241.688756] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 125, flush 1, corrupt 0, gen 0
[ 5241.688776] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5241.688778] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 64 6b 7b 80 00 00 20 00
[ 5241.688779] I/O error, dev sda, sector 1684765568 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5241.688781] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 126, flush 1, corrupt 0, gen 0
[ 5241.688838] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5241.688840] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 64 4b 7b 80 00 00 20 00
[ 5241.688842] I/O error, dev sda, sector 1682668416 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5241.688844] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 127, flush 1, corrupt 0, gen 0
[ 5241.688867] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5241.688868] sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 64 6b 7b 80 00 00 20 00
[ 5241.688870] I/O error, dev sda, sector 1684765568 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5241.688872] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 128, flush 1, corrupt 0, gen 0
[ 5253.919950] sd 0:0:0:0: [sda] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.919955] sd 0:0:0:0: [sda] tag#23 CDB: Read(10) 28 00 3f b5 39 80 00 00 20 00
[ 5253.919957] I/O error, dev sda, sector 1068841344 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.919964] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 129, flush 1, corrupt 0, gen 0
[ 5253.919995] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.919997] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 3f d5 39 80 00 00 20 00
[ 5253.919998] I/O error, dev sda, sector 1070938496 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.920001] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 130, flush 1, corrupt 0, gen 0
[ 5253.923983] sd 0:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.923988] sd 0:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 00 08 80 80 00 00 20 00
[ 5253.923990] I/O error, dev sda, sector 557184 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.923995] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 131, flush 1, corrupt 0, gen 0
[ 5253.924030] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924034] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 00 28 80 80 00 00 20 00
[ 5253.924035] I/O error, dev sda, sector 2654336 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924039] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 132, flush 1, corrupt 0, gen 0
[ 5253.924084] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924086] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 3f b4 a2 80 00 00 20 00
[ 5253.924087] I/O error, dev sda, sector 1068802688 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924090] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 133, flush 1, corrupt 0, gen 0
[ 5253.924113] sd 0:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924115] sd 0:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 3f d4 a2 80 00 00 20 00
[ 5253.924117] I/O error, dev sda, sector 1070899840 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924119] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 134, flush 1, corrupt 0, gen 0
[ 5253.924154] sd 0:0:0:0: [sda] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924157] sd 0:0:0:0: [sda] tag#22 CDB: Read(10) 28 00 3f b4 a2 80 00 00 20 00
[ 5253.924158] I/O error, dev sda, sector 1068802688 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924160] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 135, flush 1, corrupt 0, gen 0
[ 5253.924182] sd 0:0:0:0: [sda] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924184] sd 0:0:0:0: [sda] tag#23 CDB: Read(10) 28 00 3f d4 a2 80 00 00 20 00
[ 5253.924185] I/O error, dev sda, sector 1070899840 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924188] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 136, flush 1, corrupt 0, gen 0
[ 5253.924220] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924222] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 3f b4 a2 80 00 00 20 00
[ 5253.924223] I/O error, dev sda, sector 1068802688 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924226] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 137, flush 1, corrupt 0, gen 0
[ 5253.924246] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5253.924248] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 3f d4 a2 80 00 00 20 00
[ 5253.924250] I/O error, dev sda, sector 1070899840 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5253.924252] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 138, flush 1, corrupt 0, gen 0
[ 5268.563669] scsi_io_completion_action: 4 callbacks suppressed
[ 5268.563676] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5268.563682] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 3f b2 3f 60 00 00 20 00
[ 5268.563683] blk_print_req_error: 4 callbacks suppressed
[ 5268.563684] I/O error, dev sda, sector 1068646240 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5268.563691] btrfs_dev_stat_inc_and_print: 4 callbacks suppressed
[ 5268.563692] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 143, flush 1, corrupt 0, gen 0
[ 5268.563721] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5268.563723] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 3f d2 3f 60 00 00 20 00
[ 5268.563724] I/O error, dev sda, sector 1070743392 op 0x0:(READ) flags 0x1000 phys_seg 4 prio class 2
[ 5268.563727] BTRFS error (device sda1: state EA): bdev /dev/sda1 errs: wr 0, rd 144, flush 1, corrupt 0, gen 0
[ 5424.330345] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 5424.330352] sd 0:0:0:0: [sda] tag#6 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00Thank you
Last edited by Cknight70 (2023-09-08 21:48:11)
Offline
#2 2023-09-08 07:29:02
- willemw
- Member
- Registered: 2013-02-19
- Posts: 116
Re: [solved] BTRFS drive disconnects, I/O error
Could be a hardware problem (loose cable, defective harddisk, ...).
What is the output of "sudo smartctl -a /dev/sda"?
Last edited by willemw (2023-09-08 07:29:34)
Offline
#3 2023-09-08 21:47:49
- Cknight70
- Member
- Registered: 2018-01-24
- Posts: 76
Re: [solved] BTRFS drive disconnects, I/O error
Thanks for the reply, thanks to your suggestion and some stuff I was reading online helped me figure out what the issue may be
here's the output of smartctl though
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.12-arch1-1] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5 (CMR)
Device Model: ST2000DM006-2DM164
Serial Number: Z4ZCP1C2
LU WWN Device Id: 5 000c50 0b4d46a6f
Firmware Version: CC26
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Sep 8 15:48:38 2023 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 89) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 216) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 63115640
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3796
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 150164808
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 19078
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2307
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 089 089 000 Old_age Always - 11
190 Airflow_Temperature_Cel 0x0022 061 053 045 Old_age Always - 39 (Min/Max 25/39)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 263793
194 Temperature_Celsius 0x0022 039 047 000 Old_age Always - 39 (0 15 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5980h+43m+59.518s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 54594210041
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 500289960917
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 753 -
# 2 Short offline Completed without error 00% 750 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for moreLast night I tried playing a different game on Windows and I had a different drive disconnecting issue so I don't think this is a Linux related issue.
I took my power supply to a pc repair shop to get it tested and it passed.
I noticed it seems like both the drives disconnect when this issue occurs. I when putting my pc back together I realized the power cables for the hard drives are a daisy chain so its all one single cable which would explain the power issue with both drives if it wasn't a power supply issue.
Anyways I've replaced the cable and so far no issues despite trying to make it trigger again. I'm going to tentatively mark this as solved. Sometimes the issue really can just be a cable that goes bad after 5 years.
Last edited by Cknight70 (2023-09-08 21:49:52)
Offline