[SOLVED] Problem with linux 6.5.4.arch2-1

MAYBL8 · 2023-09-25 13:48:18

My system is having issues booting with the above listed kernel.

I have researched some of the messages I am getting and it is leading me to a problem with a cable inside the desktop.
I am not sure this is the problem and I haven't opened the case on the system yet.

It is booting just fine with the lts kernel.

Here are some of the kernel messages I get
Let me know if there is a better command to use.

I have loglevel=7 in grub .

When booting to the kernel the system starts to boot and then slows down repeating several messages .

[demo@arch-linux ~]$ journalctl | grep -i "ata2"
Sep 19 12:06:51 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 19 12:06:51 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 19 12:06:51 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 19 12:06:51 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 19 21:37:05 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 19 21:37:05 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 19 21:37:05 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 19 21:37:05 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 19 22:58:13 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 19 22:58:13 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 19 22:58:13 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 19 22:58:13 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 19 23:00:39 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 19 23:00:39 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 19 23:00:39 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 19 23:00:39 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 19 23:03:23 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 19 23:03:23 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 19 23:03:23 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 19 23:03:23 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 19 23:07:50 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 19 23:07:50 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 19 23:07:50 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 19 23:07:50 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 20 17:16:45 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 20 17:16:45 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 20 17:16:45 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 20 17:16:45 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 08:04:39 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 08:04:39 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 08:04:39 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 08:04:39 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 08:06:04 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 08:06:04 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 08:06:04 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 08:06:04 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 08:16:44 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 08:16:44 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 08:16:44 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 08:16:44 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 08:25:30 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 08:25:30 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 08:25:30 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 08:25:30 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 08:30:41 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 08:30:41 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 08:30:41 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 08:30:41 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 09:50:28 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 09:50:28 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 09:50:28 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 09:50:28 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 09:51:45 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 09:51:45 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 09:51:45 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 09:51:45 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 10:06:46 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 10:06:46 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 10:06:46 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 10:06:46 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 10:09:51 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 10:09:51 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 10:09:51 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 10:09:51 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 21 10:12:11 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 21 10:12:11 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 21 10:12:11 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 21 10:12:11 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 22 08:10:41 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 22 08:10:41 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 22 08:10:41 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 22 08:10:41 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 22 08:45:54 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 22 08:45:54 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 22 08:45:54 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 22 08:45:54 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 22 10:53:57 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 22 10:53:57 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 22 10:53:57 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 22 10:53:57 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 22 11:05:16 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 22 11:05:16 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 22 11:05:16 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 22 11:05:16 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 22 11:56:47 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 22 11:56:47 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 24 09:32:20 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 24 09:32:20 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 24 09:32:20 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 24 09:32:20 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 24 11:23:23 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 24 11:23:23 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 24 11:23:23 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 24 11:23:23 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 24 11:39:49 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 24 11:39:49 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 24 11:39:49 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 24 11:39:49 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 24 11:47:14 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 24 11:47:14 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 24 11:47:14 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 24 11:47:14 arch-linux kernel: ata2.00: configured for UDMA/100

Last edited by MAYBL8 (2023-10-01 12:19:40)

xerxes_ · 2023-09-27 19:52:06

You should check 'journalctl -b -g ata2'. Did you tried lts kernel?

MAYBL8 · 2023-09-29 14:29:23

[demo@arch-linux ~]$ journalctl -b -g ata
Sep 29 10:20:03 arch-linux kernel: BIOS-e820: [mem 0x0000000087140000-0x000000008718cfff] ACPI data
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000000100000-0x000000007c85b017] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x000000007c85b018-0x000000007c879457] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x000000007c879458-0x0000000080c1cfff] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000080c1d000-0x0000000080c1dfff] ACPI NVS
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000080c1e000-0x0000000080c67fff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000080c68000-0x0000000080cc3fff] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000080cc4000-0x00000000810b8fff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000810b9000-0x00000000863b9fff] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000863ba000-0x000000008713ffff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000087140000-0x000000008718cfff] ACPI data
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x000000008718d000-0x0000000087ae3fff] ACPI NVS
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000087ae4000-0x0000000087ffefff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000087fff000-0x0000000087ffffff] usable
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000088000000-0x00000000880fffff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Sep 29 10:20:03 arch-linux kernel: reserve setup_data: [mem 0x0000000100000000-0x00000004767fffff] usable
Sep 29 10:20:03 arch-linux kernel: ACPI: SSDT 0x0000000087182000 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
Sep 29 10:20:03 arch-linux kernel: NODE_DATA(0) allocated [mem 0x4767fb000-0x4767fffff]
Sep 29 10:20:03 arch-linux kernel: Memory: 16174844K/16718944K available (16384K kernel code, 2123K rwdata, 12952K rodata, 3384K init, 3916K bss, 543>
Sep 29 10:20:03 arch-linux kernel: MMIO Stale Data: Mitigation: Clear CPU buffers
Sep 29 10:20:03 arch-linux kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln>
Sep 29 10:20:03 arch-linux kernel: TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln>
Sep 29 10:20:03 arch-linux kernel: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-g>
Sep 29 10:20:03 arch-linux kernel: libata version 3.00 loaded.
Sep 29 10:20:03 arch-linux kernel: ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
Sep 29 10:20:03 arch-linux kernel: ata1: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b100 irq 124
Sep 29 10:20:03 arch-linux kernel: ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 124
Sep 29 10:20:03 arch-linux kernel: ata3: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b200 irq 124
Sep 29 10:20:03 arch-linux kernel: ata4: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b280 irq 124
Sep 29 10:20:03 arch-linux kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 29 10:20:03 arch-linux kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Sep 29 10:20:03 arch-linux kernel: ata3: SATA link down (SStatus 4 SControl 300)
Sep 29 10:20:03 arch-linux kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Sep 29 10:20:03 arch-linux kernel: ata1.00: ATA-11: SanDisk SDSSDH31000G, X61170RL, max UDMA/133
Sep 29 10:20:03 arch-linux kernel: ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
Sep 29 10:20:03 arch-linux kernel: ata4.00: ATA-9: ST2000DM001-1ER164, CC27, max UDMA/133
Sep 29 10:20:03 arch-linux kernel: ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
Sep 29 10:20:03 arch-linux kernel: ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Sep 29 10:20:03 arch-linux kernel: ata1.00: Features: Dev-Sleep
Sep 29 10:20:03 arch-linux kernel: ata4.00: configured for UDMA/133
Sep 29 10:20:03 arch-linux kernel: ata2.00: configured for UDMA/100
Sep 29 10:20:03 arch-linux kernel: ata1.00: configured for UDMA/133
Sep 29 10:20:03 arch-linux kernel: scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDH31 70RL PQ: 0 ANSI: 5
Sep 29 10:20:03 arch-linux kernel: scsi 3:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC27 PQ: 0 ANSI: 5
Sep 29 10:20:03 arch-linux kernel: Write protecting the kernel read-only data: 30720k
Sep 29 10:20:03 arch-linux kernel: Freeing unused kernel image (rodata/data gap) memory: 1384K
Sep 29 10:20:03 arch-linux kernel: rodata_test: all tests were successful
Sep 29 10:20:03 arch-linux kernel: wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
Sep 29 10:20:03 arch-linux kernel: EXT4-fs (sda9): mounted filesystem 1d3a68b1-8394-4fa4-9bed-dd1eb4e80e60 r/w with ordered data mode. Quota mode: no>
Sep 29 10:20:03 arch-linux systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
Sep 29 10:20:04 arch-linux kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Sep 29 10:20:04 arch-linux systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
Sep 29 10:20:04 arch-linux systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
Sep 29 10:20:04 arch-linux systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
Sep 29 10:20:05 arch-linux systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
Sep 29 10:20:05 arch-linux systemd[1]: Rebuild Journal Catalog was skipped because of an unmet condition check (ConditionNeedsUpdate=/var).
Sep 29 10:21:03 arch-linux systemd[594]: Starting User preferences database...
Sep 29 10:21:03 arch-linux systemd[594]: Started User preferences database.
Sep 29 10:21:04 arch-linux dbus-daemon[623]: [session uid=1000 pid=623] Activating via systemd: service name='org.ayatana.bamf' unit='bamfdaemon.serv>
Sep 29 10:21:05 arch-linux dbus-daemon[623]: [session uid=1000 pid=623] Successfully activated service 'org.ayatana.bamf'
Sep 29 10:21:25 arch-linux kded5[696]: Registering ":1.56/org/ayatana/NotificationItem/variety" to system tray

lts works fine

Update today upgraded the kernel to 6.5.5

I tried something today.
I noticed that there was a DVD in the CD-ROM drive.
I took it out and closed the tray.
I rebooted into the new kernel and it booted just fine.
I put the DVD back in the drive and rebooted and it stopped again doing the same thing.

So it is something with having a DVD in the drive.
I'm not sure if it is a blank DVD or has something on it if that matters.
Thanks

Should I close this or try to find out what is going on.
Like I said it boots fine with lts kernel.

loqs · 2023-09-29 15:27:32

https://bbs.archlinux.org/viewtopic.php?id=288723 ?

MAYBL8 · 2023-09-30 12:51:20

This appears to be my issue.
Should I mark this [SOLVED]?

loqs · 2023-09-30 14:18:04

I would suggest trying linux-6.5.3.arch1-1.3-x86_64.pkg.tar.zst from Edit2 of https://bbs.archlinux.org/viewtopic.php … 3#p2120873 which has the proposed fix for that issue applied to confirm it is the same issue before marking this thread solved.

MAYBL8 · 2023-09-30 16:04:10

Ok I downloaded the 6.5.3 kernel and installed it via pacman -U
Rebooted twice with a DVD in the drive and it worked fine.

I don't know all the technical stuff behind this and don't need to know but I have this question:

So how will I know when I can update to a new kernel?
And I suppose that I have to not allow the kernel to update , correct?

Thanks

loqs · 2023-09-30 16:25:53

MAYBL8 wrote:

So how will I know when I can update to a new kernel?

Follow the other thread. I will post an update when the fix reaches the Arch linux package.

MAYBL8 wrote:

And I suppose that I have to not allow the kernel to update , correct?

Correct. Updating the kernel until it is fixed will reintroduce the issue. Or you can locally rebuild with the fix applied.

Arch Linux

#1 2023-09-25 13:48:18

[SOLVED] Problem with linux 6.5.4.arch2-1

#2 2023-09-27 19:52:06

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

#3 2023-09-29 14:29:23

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

#4 2023-09-29 15:27:32

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

#5 2023-09-30 12:51:20

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

#6 2023-09-30 14:18:04

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

#7 2023-09-30 16:04:10

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

#8 2023-09-30 16:25:53

Re: [SOLVED] Problem with linux 6.5.4.arch2-1

Board footer