You are not logged in.

Pages: 1 2

#26 2023-10-11 19:13:31

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

Oct 11 18:09:20 hackmachine NetworkManager[374]: <warn>  [1697040560.3698] config: unknown key 'dhcp-client' in section [main] of file '/etc/NetworkManager/conf.d/dhcp-client.conf'
Oct 11 18:09:20 hackmachine NetworkManager[374]: <info>  [1697040560.5772] dhcp: init: Using DHCP client 'internal'

Please stop NM (and systemd-networkd and everyhing else) and try just "sudo dhcpcd -dB" and post the output.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#27 2023-10-11 19:13:59

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

I'm lost, I even installed Arch LTS but the driver needs to be for the LTS kernel as well, so I'll try tomorrow. After a few reinstalls of the driver I was able to get a steady connection with OpenWRT but after opening archlinux.org in the browser the connection drops completely

Arch user for 2 years
Still a noob

Offline

#28 2023-10-11 19:15:32

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

Please stop NM (and systemd-networkd and everyhing else) and try just "sudo dhcpcd -dB" and post the output.

I gave up for today, will post output tomorrow.

Arch user for 2 years
Still a noob

Offline

#29 2023-10-11 19:16:07

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

There're no r8168 errors

You can also try r8169, but esp. recently that was the one causing trouble - and I don't like the weird dhcp behavior so lets get that under control first.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#30 2023-10-11 19:20:35

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:
seth wrote:

There're no r8168 errors

You can also try r8169, but esp. recently that was the one causing trouble - and I don't like the weird dhcp behavior so lets get that under control first.

Feel free to drop what outputs you need, I'll send em first things first when I get my hands on my PC

Arch user for 2 years
Still a noob

Offline

#31 2023-10-11 19:37:55

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

"sudo dhcpcd -dB"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#32 2023-10-12 14:33:33

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

sudo dhcpcd -dB

I ran it with NM enabled and NM disabled:

dhcpcd with NetworkManager:

[newton@hackmachine ~]$ sudo dhcpcd -dB                                                                                        
dhcpcd-10.0.2 starting                                                                                                         
udev: starting                                                                                                                 
dev: loaded udev                                                                                                               
spawned privileged proxy on PID 926                                                                                            
spawned network proxy on PID 927                                                                                               
spawned controller proxy on PID 928                                                                                            
dhcp6_openudp: Address already in use                                                                                          
ps_inet_startcb: dhcp6_open: Address already in use                                                                            
DUID 00:01:00:01:2c:b6:c2:43:e0:d5:5e:83:7b:06                                                                                 
sandbox: seccomp                                                                                                               
lo: ignoring due to interface type and no config                                                                               
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks PREINIT                                                                    
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks CARRIER                                                                    
enp6s0: IAID 5e:83:7b:06                                                            
enp6s0: delaying IPv6 router solicitation for 0.4 seconds                           
enp6s0: delaying IPv4 for 0.4 seconds                                               
enp6s0: soliciting an IPv6 router                                                       
enp6s0: sending Router Solicitation                                                     
enp6s0: Router Advertisement from fe80::ca7f:54ff:feaf:4250                                                                                                          
enp6s0: adding address fdd8:c401:baf9:0:7c31:957a:259:7a7b/64                                                                                                        
enp6s0: pltime infinity, vltime infinity                                                                                                                             
enp6s0: adding route to fdd8:c401:baf9::/64                                                                                                                          
enp6s0: waiting for Router Advertisement DAD to complete                                                                                                             
enp6s0: reading lease: /var/lib/dhcpcd/enp6s0.lease6                                                                                                                 
enp6s0: soliciting a DHCPv6 lease                                                                                                                                    
enp6s0: delaying SOLICIT6 (xid 0xd12037), next in 1.1 seconds                                                                                                        
enp6s0: reading lease: /var/lib/dhcpcd/enp6s0.lease                                                                                                                  
enp6s0: soliciting a DHCP lease                                                                                                                                      
enp6s0: sending DISCOVER (xid 0x901809af), next in 4.2 seconds
enp6s0: spawned BPF BOOTP on PID 938
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 1.0 seconds
enp6s0: Router Advertisement DAD completed
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks ROUTERADVERT
Dropped protocol specifier '.ra' from 'enp6s0.ra'. Using 'enp6s0' (ifindex=2).
Failed to set DNS configuration: Unit dbus-org.freedesktop.resolve1.service not found.
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 2.0 seconds
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: offered 192.168.1.118 from 192.168.1.1
enp6s0: sending REQUEST (xid 0x901809af), next in 4.5 seconds
enp6s0: process BPF BOOTP already started on pid 938
enp6s0: acknowledged 192.168.1.118 from 192.168.1.1
enp6s0: spawned BPF ARP 192.168.1.118 on PID 946
enp6s0: probing address 192.168.1.118/24
enp6s0: probing for 192.168.1.118
enp6s0: ARP probing 192.168.1.118 (1 of 3), next in 1.1 seconds
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 4.2 seconds
enp6s0: ARP probing 192.168.1.118 (2 of 3), next in 1.8 seconds
enp6s0: ARP probing 192.168.1.118 (3 of 3), next in 2.0 seconds
enp6s0: DAD completed for 192.168.1.118
enp6s0: leased 192.168.1.118 for 43200 seconds
enp6s0: renew in 21600 seconds, rebind in 37800 seconds
enp6s0: writing lease: /var/lib/dhcpcd/enp6s0.lease
enp6s0: adding IP address 192.168.1.118/24 broadcast 192.168.1.255
enp6s0: adding route to 192.168.1.0/24
enp6s0: adding default route via 192.168.1.1
enp6s0: ARP announcing 192.168.1.118 (1 of 2), next in 2.0 seconds
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks BOUND
Dropped protocol specifier '.dhcp' from 'enp6s0.dhcp'. Using 'enp6s0' (ifindex=2).
Failed to set DNS configuration: Unit dbus-org.freedesktop.resolve1.service not found.
enp6s0: BPF BOOTP exited from PID 938
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 7.7 seconds
enp6s0: ARP announcing 192.168.1.118 (2 of 2)
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 15.2 seconds
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 32.2 seconds
enp6s0: multicasting SOLICIT6 (xid 0xd12037), next in 69.5 seconds

dhcpcd without NetworkManager:

[newton@hackmachine ~]$ sudo dhcpcd -dB
dhcpcd-10.0.2 starting                                                                                                         
udev: starting                                                                                                                 
dev: loaded udev                                                                                                               
spawned privileged proxy on PID 871                                                                                            
spawned network proxy on PID 872                                                                                               
spawned controller proxy on PID 873                                                                                            
DUID 00:01:00:01:2c:b6:c2:43:e0:d5:5e:83:7b:06                                                                                 
sandbox: seccomp                                                                                                               
lo: ignoring due to interface type and no config                                                                               
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks PREINIT                                                                    
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks NOCARRIER                                                                  
Dropped protocol specifier '.link' from 'enp6s0.link'. Using 'enp6s0' (ifindex=2).                                             
Failed to revert interface configuration: Unit dbus-org.freedesktop.resolve1.service not found.                                
no interfaces have a carrier                                                        
enp6s0: waiting for carrier                                                         
enp6s0: carrier acquired                                                            
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks CARRIER                             
enp6s0: IAID 5e:83:7b:06                                                                
enp6s0: adding address fe80::d223:9b6a:d0b1:a9c5                                                                                                                     
enp6s0: pltime infinity, vltime infinity                                                                                                                             
enp6s0: delaying IPv6 router solicitation for 0.0 seconds                                                                                                            
enp6s0: delaying IPv4 for 1.4 seconds                                                                                                                                
enp6s0: soliciting an IPv6 router                                                                                                                                    
enp6s0: delaying Router Solicitation for LL address                                                                                                                  
enp6s0: reading lease: /var/lib/dhcpcd/enp6s0.lease                                                                                                                  
enp6s0: rebinding lease of 192.168.1.118                                                                                                                             
enp6s0: spawned BPF ARP 192.168.1.118 on PID 888                                                                                                                     
enp6s0: sending REQUEST (xid 0x5a9adf84), next in 4.5 seconds                                                                                                        
enp6s0: spawned BPF BOOTP on PID 889
enp6s0: acknowledged 192.168.1.118 from 192.168.1.1
enp6s0: probing address 192.168.1.118/24
enp6s0: probing for 192.168.1.118
enp6s0: ARP probing 192.168.1.118 (1 of 3), next in 1.9 seconds
enp6s0: sending Router Solicitation
enp6s0: Router Advertisement from fe80::ca7f:54ff:feaf:4250
enp6s0: adding address fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: pltime infinity, vltime infinity
enp6s0: adding route to fdd8:c401:baf9::/64
enp6s0: waiting for Router Advertisement DAD to complete
enp6s0: reading lease: /var/lib/dhcpcd/enp6s0.lease6
enp6s0: soliciting a DHCPv6 lease
enp6s0: delaying SOLICIT6 (xid 0x984d7b), next in 1.1 seconds
enp6s0: multicasting SOLICIT6 (xid 0x984d7b), next in 1.1 seconds
enp6s0: REPLY6 received from fe80::ca7f:54ff:feaf:4250
enp6s0: adding address fdd8:c401:baf9::550/128
enp6s0: pltime 43200 seconds, vltime 43200 seconds
enp6s0: renew in 21600, rebind in 34560, expire in 43200 seconds
enp6s0: writing lease: /var/lib/dhcpcd/enp6s0.lease6
enp6s0: waiting for DHCPv6 DAD to complete
enp6s0: ARP probing 192.168.1.118 (2 of 3), next in 1.8 seconds
enp6s0: Router Advertisement DAD completed
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks ROUTERADVERT
Dropped protocol specifier '.ra' from 'enp6s0.ra'. Using 'enp6s0' (ifindex=2).
Failed to set DNS configuration: Unit dbus-org.freedesktop.resolve1.service not found.
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: sending NA for fdd8:c401:baf9::550/128
enp6s0: DHCPv6 DAD completed
Dropped protocol specifier '.dhcp6' from 'enp6s0.dhcp6'. Using 'enp6s0' (ifindex=2).
Failed to set DNS configuration: Unit dbus-org.freedesktop.resolve1.service not found.
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks BOUND6
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: ARP probing 192.168.1.118 (3 of 3), next in 2.0 seconds
enp6s0: sending NA for fdd8:c401:baf9::550/128
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: sending NA for fdd8:c401:baf9::550/128
enp6s0: DAD completed for 192.168.1.118
enp6s0: leased 192.168.1.118 for 43200 seconds
enp6s0: renew in 21600 seconds, rebind in 37800 seconds
enp6s0: writing lease: /var/lib/dhcpcd/enp6s0.lease
enp6s0: adding IP address 192.168.1.118/24 broadcast 192.168.1.255
enp6s0: adding route to 192.168.1.0/24
enp6s0: adding default route via 192.168.1.1
enp6s0: ARP announcing 192.168.1.118 (1 of 2), next in 2.0 seconds
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks BOUND
Dropped protocol specifier '.dhcp' from 'enp6s0.dhcp'. Using 'enp6s0' (ifindex=2).
Failed to set DNS configuration: Unit dbus-org.freedesktop.resolve1.service not found.
enp6s0: BPF BOOTP exited from PID 889
enp6s0: ARP announcing 192.168.1.118 (2 of 2)

In both cases I have opened w3m, navigated through archlinux.org, and then opened firefox and opened a few websites. In both cases the internet gets cut off after those lines from dhcpcd:

enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks BOUND
Dropped protocol specifier '.dhcp' from 'enp6s0.dhcp'. Using 'enp6s0' (ifindex=2).
Failed to set DNS configuration: Unit dbus-org.freedesktop.resolve1.service not found.
enp6s0: BPF BOOTP exited from PID 889

Arch user for 2 years
Still a noob

Offline

#33 2023-10-12 15:02:55

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

Running dhcpcd alogn NM isn't an option at all, so we ignore that.

resolvectl status
stat /etc/resolv.conf
cat /etc/resolv.conf
pacman -Qs resolv # you seem to have https://archlinux.org/packages/core/x86_64/systemd-resolvconf/ but no resolved running?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#34 2023-10-12 15:26:06

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

you seem to have https://archlinux.org/packages/core/x86 … esolvconf/ but no resolved running?

I had it disabled for some reason, I did systemctl enable and start. Here is the systemctl status of it after the internet went down:

Oct 12 16:42:30 hackmachine systemd-resolved[297]: Positive Trust Anchors:                                                                                           
Oct 12 16:42:30 hackmachine systemd-resolved[297]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d                                
Oct 12 16:42:30 hackmachine systemd-resolved[297]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.>
Oct 12 16:42:31 hackmachine systemd-resolved[297]: Using system hostname 'hackmachine'.                                                                              
Oct 12 16:42:31 hackmachine systemd[1]: Started Network Name Resolution.                                                                                             
Oct 12 16:42:31 hackmachine systemd-resolved[297]: /etc/hosts:6: address '167.172.52.160:30735' is invalid, ignoring: Invalid argument                               
Oct 12 16:42:56 hackmachine systemd-resolved[297]: Switching to fallback DNS server 1.1.1.1#cloudflare-dns.com.
Oct 12 16:43:08 hackmachine systemd-resolved[297]: enp6s0: Bus client set DNS server list to: fdd8:c401:baf9::1
Oct 12 16:43:10 hackmachine systemd-resolved[297]: enp6s0: Bus client set DNS server list to: 192.168.1.1
Oct 12 16:43:10 hackmachine systemd-resolved[297]: enp6s0: Bus client set search domain list to: lan, lan

As for dhcpcd the network silently fails, there's no error or info when the network fails, here is the output:

[newton@hackmachine ~]$ sudo dhcpcd -dB
dhcpcd-10.0.2 starting
udev: starting
dev: loaded udev
spawned privileged proxy on PID 1749
spawned network proxy on PID 1750
spawned controller proxy on PID 1751
DUID 00:01:00:01:2c:b6:c2:43:e0:d5:5e:83:7b:06
sandbox: seccomp
lo: ignoring due to interface type and no config
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks PREINIT
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks NOCARRIER
Dropped protocol specifier '.link' from 'enp6s0.link'. Using 'enp6s0' (ifindex=2).
no interfaces have a carrier
enp6s0: waiting for carrier
enp6s0: carrier acquired
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks CARRIER
enp6s0: IAID 5e:83:7b:06
enp6s0: adding address fe80::d223:9b6a:d0b1:a9c5
enp6s0: pltime infinity, vltime infinity
enp6s0: delaying IPv6 router solicitation for 0.0 seconds
enp6s0: delaying IPv4 for 0.5 seconds
enp6s0: soliciting an IPv6 router
enp6s0: delaying Router Solicitation for LL address
enp6s0: reading lease: /var/lib/dhcpcd/enp6s0.lease
enp6s0: rebinding lease of 192.168.1.118
enp6s0: spawned BPF ARP 192.168.1.118 on PID 1786
enp6s0: sending REQUEST (xid 0xaa01efda), next in 3.1 seconds
enp6s0: spawned BPF BOOTP on PID 1787
enp6s0: acknowledged 192.168.1.118 from 192.168.1.1
enp6s0: probing address 192.168.1.118/24
enp6s0: probing for 192.168.1.118
enp6s0: ARP probing 192.168.1.118 (1 of 3), next in 1.9 seconds
enp6s0: sending Router Solicitation
enp6s0: Router Advertisement from fe80::ca7f:54ff:feaf:4250
enp6s0: adding address fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: pltime infinity, vltime infinity
enp6s0: adding route to fdd8:c401:baf9::/64
enp6s0: waiting for Router Advertisement DAD to complete
enp6s0: reading lease: /var/lib/dhcpcd/enp6s0.lease6
enp6s0: confirming prior DHCPv6 lease
enp6s0: delaying CONFIRM6 (xid 0x457132), next in 1.0 seconds
enp6s0: multicasting CONFIRM6 (xid 0x457132), next in 1.0 seconds
enp6s0: REPLY6 received from fe80::ca7f:54ff:feaf:4250
enp6s0: adding address fdd8:c401:baf9::550/128
enp6s0: pltime 43200 seconds, vltime 43200 seconds
enp6s0: renew in 17582, rebind in 30542, expire in 39182 seconds
enp6s0: waiting for DHCPv6 DAD to complete
enp6s0: ARP probing 192.168.1.118 (2 of 3), next in 1.7 seconds
enp6s0: Router Advertisement DAD completed
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks ROUTERADVERT
Dropped protocol specifier '.ra' from 'enp6s0.ra'. Using 'enp6s0' (ifindex=2).
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: sending NA for fdd8:c401:baf9::550/128
enp6s0: DHCPv6 DAD completed
Dropped protocol specifier '.dhcp6' from 'enp6s0.dhcp6'. Using 'enp6s0' (ifindex=2).
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks REBOOT6
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: ARP probing 192.168.1.118 (3 of 3), next in 2.0 seconds
enp6s0: sending NA for fdd8:c401:baf9::550/128
enp6s0: sending NA for fdd8:c401:baf9:0:7c31:957a:259:7a7b/64
enp6s0: sending NA for fdd8:c401:baf9::550/128
enp6s0: DAD completed for 192.168.1.118
enp6s0: leased 192.168.1.118 for 43200 seconds
enp6s0: renew in 21600 seconds, rebind in 37800 seconds
enp6s0: writing lease: /var/lib/dhcpcd/enp6s0.lease
enp6s0: adding IP address 192.168.1.118/24 broadcast 192.168.1.255
enp6s0: adding route to 192.168.1.0/24
enp6s0: adding default route via 192.168.1.1
enp6s0: ARP announcing 192.168.1.118 (1 of 2), next in 2.0 seconds
enp6s0: executing: /usr/lib/dhcpcd/dhcpcd-run-hooks BOUND
Dropped protocol specifier '.dhcp' from 'enp6s0.dhcp'. Using 'enp6s0' (ifindex=2).
enp6s0: BPF BOOTP exited from PID 1787
enp6s0: ARP announcing 192.168.1.118 (2 of 2)

Here are the commands you wanted (resolved is enabled)

[newton@hackmachine ~]$ resolvectl status
Global
           Protocols: +LLMNR +mDNS -DNSOverTLS DNSSEC=no/unsupported
    resolv.conf mode: foreign
  Current DNS Server: fdd8:c401:baf9::1
         DNS Servers: 1.1.1.1 8.8.8.8 192.168.1.1 fdd8:c401:baf9::1
Fallback DNS Servers: 1.1.1.1#cloudflare-dns.com 9.9.9.9#dns.quad9.net 8.8.8.8#dns.google 2606:4700:4700::1111#cloudflare-dns.com 2620:fe::9#dns.quad9.net
                      2001:4860:4860::8888#dns.google
          DNS Domain: lan

Link 2 (enp6s0)
    Current Scopes: LLMNR/IPv6 mDNS/IPv6
         Protocols: -DefaultRoute +LLMNR +mDNS -DNSOverTLS DNSSEC=no/unsupported
[newton@hackmachine ~]$ stat /etc/resolv.conf 
  File: /etc/resolv.conf
  Size: 252             Blocks: 8          IO Block: 4096   regular file
Device: 8,2     Inode: 918570      Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2023-10-12 17:18:18.902888765 +0200
Modify: 2023-10-12 17:15:30.517217083 +0200
Change: 2023-10-12 17:15:30.517217083 +0200
 Birth: 2023-10-12 17:15:30.517217083 +0200
[newton@hackmachine ~]$ cat /etc/resolv.conf 
# Generated by NetworkManager
search lan
nameserver 1.1.1.1
nameserver 8.8.8.8
nameserver 192.168.1.1
# NOTE: the libc resolver may not support more than 3 nameservers.
# The nameservers listed below may not be recognized.
nameserver fdd8:c401:baf9::1
[newton@hackmachine ~]$ pacman -Qs resolv
local/geoip 1.6.12-2
    Non-DNS IP-to-country resolver C library & utils
local/python-resolvelib 1.0.1-1
    Resolve abstract dependencies into concrete ones
local/systemd-resolvconf 254.5-1
    systemd resolvconf replacement (for use with systemd-resolved)
[newton@hackmachine ~]$

Arch user for 2 years
Still a noob

Offline

#35 2023-10-12 15:31:57

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

That output is now pointless.

When using *only* dhcpcd (not NM!) and the "internet fails", post the outputs of

ip a
ip r
ping -C1 _gateway
ping -C1 192.168.1.1
ping -C1 8.8.8.8
ping -C1 google.com

Wild guess: disable IPv6, https://wiki.archlinux.org/title/IPv6#Disable_IPv6 "ipv6.disable=1"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#36 2023-10-12 16:08:15

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

post the outputs of

ip a
ip r
ping -C1 _gateway
ping -C1 192.168.1.1
ping -C1 8.8.8.8
ping -C1 google.com

Wild guess: disable IPv6, https://wiki.archlinux.org/title/IPv6#Disable_IPv6 "ipv6.disable=1"

disabling IPv6 results in me getting no DHCP lease whatsoever. Here are the command outputs:

[newton@hackmachine ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000                                    
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00                                                                      
    inet 127.0.0.1/8 scope host lo                                                                                             
       valid_lft forever preferred_lft forever                                                                                 
    inet6 ::1/128 scope host noprefixroute                                                                                     
       valid_lft forever preferred_lft forever                                                                                 
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000                                
    link/ether e0:d5:5e:83:7b:06 brd ff:ff:ff:ff:ff:ff                                                                         
    inet 192.168.1.118/24 brd 192.168.1.255 scope global dynamic noprefixroute enp6s0                                          
       valid_lft 42887sec preferred_lft 37487sec                                                                               
    inet6 fdd8:c401:baf9::550/128 scope global dynamic noprefixroute                                                           
       valid_lft 42884sec preferred_lft 42884sec                                                                               
    inet6 fdd8:c401:baf9:0:7c31:957a:259:7a7b/64 scope global mngtmpaddr noprefixroute                                         
       valid_lft forever preferred_lft forever                                      
    inet6 fe80::d223:9b6a:d0b1:a9c5/64 scope link                                   
       valid_lft forever preferred_lft forever                                      
[newton@hackmachine ~]$ ip r
default via 192.168.1.1 dev enp6s0 proto dhcp src 192.168.1.118 metric 1002             
192.168.1.0/24 dev enp6s0 proto dhcp scope link src 192.168.1.118 metric 1002                                                                                        
[newton@hackmachine ~]$ ping -c1 _gateway                                                                                                                      
PING _gateway (192.168.1.1) 56(84) bytes of data.                                                                                                                    
From 192.168.1.118 (192.168.1.118) icmp_seq=1 Destination Host Unreachable                                                                                           
                                                                                                                                                                     
--- _gateway ping statistics ---                                                                                                                                     
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms                                                                                             
                                                                                                                                                                     
[newton@hackmachine ~]$ ping -c1 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.                                                                                                                 
From 192.168.1.118 icmp_seq=1 Destination Host Unreachable

--- 192.168.1.1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms

[newton@hackmachine ~]$ ping -c1 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.1.118 icmp_seq=1 Destination Host Unreachable

--- 8.8.8.8 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms

[newton@hackmachine ~]$ ping -c1 google.com
ping: google.com: Name or service not known
[newton@hackmachine ~]$

Arch user for 2 years
Still a noob

Offline

#37 2023-10-12 17:38:04

Fixxer
Member
From: Poland
Registered: 2011-08-29
Posts: 232

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

What is the behaviour of NIC without dedicated r8168 driver?

Could you show logs, more globally?

journalctl -q -b -p 3..3
journalctl -q -b -p 4..4
ip r

I also have The F..g Saint R8168 NIC xD There were problems about 2013. I'm using only r8169 built-in kernel module with systemd-networkd.

Look here: 3.5 and 3.6 section, for IOMMU setting in BIOS:
https://wiki.archlinux.org/title/Networ … 8111/8168B .

Last edited by Fixxer (2023-10-12 17:42:24)

Offline

#38 2023-10-12 17:50:43

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

Fixxer wrote:

What is the behaviour of NIC without dedicated r8168 driver?

I used the default driver back when I was a noob at Linux (still am) but then I had the brilliant idea to download the dedicated driver. How can I revert it to use the built-in linux one? just sudo pacman -R r8168?

EDIT: Forgot about google, I'll change it to r8169 and post outcome.

Last edited by NewtonPL (2023-10-12 17:57:38)

Arch user for 2 years
Still a noob

Offline

#39 2023-10-12 17:53:37

Fixxer
Member
From: Poland
Registered: 2011-08-29
Posts: 232

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

just sudo pacman -R r8168?

Yes.

I have this revision:

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
	Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
	Kernel driver in use: r8169
	Kernel modules: r8169

It's no need to reboot but I will be better to reboot big_smile It's really weird hardware.

Then just try to enable NetworkManager with default settings, etc. Remember to also enable NetworkManager-wait-online.service.

EDIT:
Check system logs as I wrote before.

Last edited by Fixxer (2023-10-12 18:00:16)

Offline

#40 2023-10-12 18:06:09

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

Fixxer wrote:

It's no need to reboot but I will be better to reboot big_smile It's re
Then just try to enable NetworkManager with default settings, etc. Remember to also enable NetworkManager-wait-online.service.

Based, after switching said drivers internet is reliable again. Before I mark it as solved, what was the cause of those drivers failing?

Arch user for 2 years
Still a noob

Offline

#41 2023-10-12 18:11:45

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

Fixxer wrote:

Check system logs as I wrote before.

I'll supply them tomorrow as right now as I'll have more free time on my hands and I can install the r8168 driver again, because logs now dont contain that internet issue.

Arch user for 2 years
Still a noob

Offline

#42 2023-10-12 18:12:22

Fixxer
Member
From: Poland
Registered: 2011-08-29
Posts: 232

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

I don't even try to inquire it. There was a period, don't remember when, that r8169 doesn't work well, so I've tried to use r8168. There was even worse, total freeze, no usb3.0, etc.

Maybe it depends on platform... and chipset revision. I don't know.

Check parameters of interface, R8168 it's gigabit, so check this way - should be 1000Mb/s with full duplex:

sudo ethtool enp6s0

Check system logs in case of any errors, as I wrote above.

EDIT:
No, if r8169 works as it should, it's not necessary to install r8168. Just check in several days if current setup with r8169 is stable and doesn't cause strange, any additional errors.

pl_PL.UTF-8
Jak działa to zostaw - jeździć, obserwować big_smile

Last edited by Fixxer (2023-10-12 18:17:51)

Offline

#43 2023-10-12 18:23:46

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

Fixxer wrote:

Check parameters of interface, R8168 it's gigabit, so check this way - should be 1000Mb/s with full duplex:

sudo ethtool enp6s0

Here you go mordo:

Settings for enp6s0:                                                                                                           
        Supported ports: [ TP    MII ]                                                                                         
        Supported link modes:   10baseT/Half 10baseT/Full                                                                      
                                100baseT/Half 100baseT/Full                                                                    
                                1000baseT/Full                                                                                 
        Supported pause frame use: Symmetric Receive-only                                                                      
        Supports auto-negotiation: Yes                                                                                         
        Supported FEC modes: Not reported                                                                                      
        Advertised link modes:  10baseT/Half 10baseT/Full                                                                      
                                100baseT/Half 100baseT/Full                                                                    
                                1000baseT/Full                                                                                 
        Advertised pause frame use: Symmetric Receive-only                                                                     
        Advertised auto-negotiation: Yes                                                                                       
        Advertised FEC modes: Not reported                                          
        Link partner advertised link modes:  10baseT/Half 10baseT/Full              
                                             100baseT/Half 100baseT/Full            
                                             1000baseT/Full                             
        Link partner advertised pause frame use: Symmetric Receive-only                 
        Link partner advertised auto-negotiation: Yes                                                                                                                
        Link partner advertised FEC modes: Not reported                                                                                                              
        Speed: 1000Mb/s                                                                                                                                              
        Duplex: Full                                                                                                                                                 
        Auto-negotiation: on                                                                                                                                         
        master-slave cfg: preferred slave                                                                                                                            
        master-slave status: slave                                                                                                                                   
        Port: Twisted Pair                                                                                                                                           
        PHYAD: 0                                                                                                                                                     
        Transceiver: external                                                                                                                                        
        MDI-X: Unknown
        Supports Wake-on: pumbg
        Wake-on: d
        Link detected: yes

Arch user for 2 years
Still a noob

Offline

#44 2023-10-12 18:27:23

Fixxer
Member
From: Poland
Registered: 2011-08-29
Posts: 232

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

All is ok, I have the same parameteres.

Jest w porządku, negocjuje max, 1 Gbit - tak ma być.

Offline

#45 2023-10-12 19:37:15

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

r8169 had massive issues in the early 6.4 kernels, https://bugzilla.kernel.org/show_bug.cgi?id=217596 - likely the reason why you went for r8168?
And then the out-of-tree driver has probably fallen behind changes in the 6.5 kernels.
(What's bewildering is the complete silence of the failure, no crash nor any kind of TCP errors…)

Historically, support for the RTL8111/8168/8411 chips is one-off, so be ready to try r8168 if you start getting trouble w/ r8169 in the future and don't hold a grudge wink

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#46 2023-10-13 05:50:26

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

likely the reason why you went for r8168?

Nah, it was back when there were 5.x kernels and I had a network speed of Kb/s, as it turned out it was the ISPs issue but I kept the driver

Arch user for 2 years
Still a noob

Offline

#47 2023-10-13 20:05:46

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

The only issue is that CUPS says that "The printer is unreachable at this time"

Arch user for 2 years
Still a noob

Offline

#48 2023-10-13 20:08:28

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,074

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

And what is the printers URL?
Can you ping it? Or its IP?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#49 2023-10-14 07:37:36

NewtonPL
Member
From: Poland
Registered: 2022-02-20
Posts: 79

Re: [SOLVED, driver issue] Ethernet enp6s0 broken after update.

seth wrote:

And what is the printers URL?
Can you ping it? Or its IP?

It's all fine now, solved with a printer reboot

Arch user for 2 years
Still a noob

Offline

Pages: 1 2

Board footer

Powered by FluxBB