You are not logged in.
- Topics: Active | Unanswered
#1 2023-10-14 05:57:12
- tbernardes
- Member
- From: Brazil
- Registered: 2015-08-10
- Posts: 8
KDE: xorg broke DPI and font size
Hello everybody.
I use a notebook with a 14 inch monitor and 1920x1080 resolution and I use KDE Plasma on Xorg. My xorg-server is 21.1.8-2. My problem is: the default DPI is 96, and default global scale is 100%, but my screen is all zoomed. I have already researched and tested several apparent solutions, but all without success.
[tbernardes@ArchKDE ~]$ cat .Xresources
Xft.dpi: 96
[tbernardes@ArchKDE ~]$ xdpyinfo | grep -B2 resolution
screen #0:
dimensions: 1920x1080 pixels (508x285 millimeters)
resolution: 96x96 dots per inch
My first attempt was to follow Arch Linux Wiki to set display size and DPI. After, I tried other references:
To check the correct dpi, I used the DPI Love. Here are additional sources (from ArchWiki) that I checked to try to resolve the issue:
SDDM, xprofile, HiDPI, X resources and xinit.
Now I feel like I'm going in circles. I sincerely hope someone can help me find a solution.
Thank you very much.
Offline
#2 2023-10-14 06:41:44
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,654
Re: KDE: xorg broke DPI and font size
"zoomed" in or out?
Please post the output of
xrandr --verboseand your Xorg log, https://wiki.archlinux.org/title/Xorg#General
The physical resolution should be more along ~160DPI so setting the logical resolution to 96DPI would make everything too small.
Offline
#3 2023-10-15 05:18:41
- tbernardes
- Member
- From: Brazil
- Registered: 2015-08-10
- Posts: 8
Re: KDE: xorg broke DPI and font size
Thank you very much in advance.
seth wrote:
"zoomed" in or out?
Zoom in. After logging in, my screen is enlarged.
seth wrote:
The physical resolution should be more along ~160DPI so setting the logical resolution to 96DPI would make everything too small.
I found that my correct DPI is 157, using DPI Love and configuring /etc/X11/xorg.conf.d/90-monitor.conf, but the logical resolution to 96DPI is not maintained. This is the problem. I've tried different settings.
[tbernardes@ArchKDE ~]$ xrandr --verbose
creen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (0x48) normal (normal left inverted right x axis y axis) 310mm x 170mm
Identifier: 0x43
Timestamp: 4851
Subpixel: unknown
Gamma: 1.0:1.2:1.4
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
_KDE_SCREEN_INDEX: 1
EDID:
00ffffffffffff0038702b0000000000
011c0104951f117802b370985d598e28
1c505400000001010101010101010101
0101010101011a3680a070381f403020
350035ae1000001a522b80a070381f40
3020350035ae1000001a000000fe0056
5030383880313430324c303100000000
0000412196001000000a010a20200007
BACKLIGHT: 67200
range: (0, 96000)
Backlight: 67200
range: (0, 96000)
vrr_capable: 0
range: (0, 1)
Colorspace: Default
supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
max bpc: 12
range: (6, 12)
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
panel orientation: Normal
supported: Normal, Upside Down, Left Side Up, Right Side Up
scaling mode: Full aspect
supported: Full, Center, Full aspect
link-status: Good
supported: Good, Bad
non-desktop: 0
range: (0, 1)
1920x1080 (0x48) 138.500MHz +HSync -VSync *current +preferred
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 66.59KHz
v: height 1080 start 1083 end 1088 total 1111 clock 59.93Hz
1920x1080 (0x534) 110.900MHz +HSync -VSync
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 53.32KHz
v: height 1080 start 1083 end 1088 total 1111 clock 47.99Hz
1680x1050 (0x535) 119.000MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.67KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.88Hz
1400x1050 (0x536) 122.000MHz +HSync +VSync
h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.89KHz
v: height 1050 start 1052 end 1064 total 1082 clock 59.98Hz
1600x900 (0x537) 118.997MHz -HSync +VSync
h: width 1600 start 1696 end 1864 total 2128 skew 0 clock 55.92KHz
v: height 900 start 901 end 904 total 932 clock 60.00Hz
1600x900 (0x538) 118.250MHz -HSync +VSync
h: width 1600 start 1696 end 1856 total 2112 skew 0 clock 55.99KHz
v: height 900 start 903 end 908 total 934 clock 59.95Hz
1600x900 (0x539) 97.500MHz +HSync -VSync
h: width 1600 start 1648 end 1680 total 1760 skew 0 clock 55.40KHz
v: height 900 start 903 end 908 total 926 clock 59.82Hz
1280x1024 (0x53a) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1400x900 (0x53b) 103.500MHz -HSync +VSync
h: width 1400 start 1480 end 1624 total 1848 skew 0 clock 56.01KHz
v: height 900 start 903 end 913 total 934 clock 59.96Hz
1400x900 (0x53c) 86.500MHz +HSync -VSync
h: width 1400 start 1448 end 1480 total 1560 skew 0 clock 55.45KHz
v: height 900 start 903 end 913 total 926 clock 59.88Hz
1280x960 (0x53d) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1368x768 (0x53e) 85.860MHz -HSync +VSync
h: width 1368 start 1440 end 1584 total 1800 skew 0 clock 47.70KHz
v: height 768 start 769 end 772 total 795 clock 60.00Hz
1368x768 (0x53f) 85.250MHz -HSync +VSync
h: width 1368 start 1440 end 1576 total 1784 skew 0 clock 47.79KHz
v: height 768 start 771 end 781 total 798 clock 59.88Hz
1368x768 (0x540) 72.250MHz +HSync -VSync
h: width 1368 start 1416 end 1448 total 1528 skew 0 clock 47.28KHz
v: height 768 start 771 end 781 total 790 clock 59.85Hz
1280x800 (0x541) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1280x800 (0x542) 71.000MHz +HSync -VSync
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 49.31KHz
v: height 800 start 803 end 809 total 823 clock 59.91Hz
1280x720 (0x543) 74.500MHz -HSync +VSync
h: width 1280 start 1344 end 1472 total 1664 skew 0 clock 44.77KHz
v: height 720 start 723 end 728 total 748 clock 59.86Hz
1280x720 (0x544) 74.480MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.76KHz
v: height 720 start 721 end 724 total 746 clock 60.00Hz
1280x720 (0x545) 63.750MHz +HSync -VSync
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 44.27KHz
v: height 720 start 723 end 728 total 741 clock 59.74Hz
1024x768 (0x546) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
1024x576 (0x547) 46.995MHz -HSync +VSync
h: width 1024 start 1064 end 1168 total 1312 skew 0 clock 35.82KHz
v: height 576 start 577 end 580 total 597 clock 60.00Hz
1024x576 (0x548) 46.500MHz -HSync +VSync
h: width 1024 start 1064 end 1160 total 1296 skew 0 clock 35.88KHz
v: height 576 start 579 end 584 total 599 clock 59.90Hz
1024x576 (0x549) 42.000MHz +HSync -VSync
h: width 1024 start 1072 end 1104 total 1184 skew 0 clock 35.47KHz
v: height 576 start 579 end 584 total 593 clock 59.82Hz
960x540 (0x54a) 40.784MHz -HSync +VSync
h: width 960 start 992 end 1088 total 1216 skew 0 clock 33.54KHz
v: height 540 start 541 end 544 total 559 clock 60.00Hz
960x540 (0x54b) 40.750MHz -HSync +VSync
h: width 960 start 992 end 1088 total 1216 skew 0 clock 33.51KHz
v: height 540 start 543 end 548 total 562 clock 59.63Hz
960x540 (0x54c) 37.250MHz +HSync -VSync
h: width 960 start 1008 end 1040 total 1120 skew 0 clock 33.26KHz
v: height 540 start 543 end 548 total 556 clock 59.82Hz
800x600 (0x54d) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x54e) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
864x486 (0x54f) 32.901MHz -HSync +VSync
h: width 864 start 888 end 976 total 1088 skew 0 clock 30.24KHz
v: height 486 start 487 end 490 total 504 clock 60.00Hz
864x486 (0x550) 32.500MHz -HSync +VSync
h: width 864 start 888 end 968 total 1072 skew 0 clock 30.32KHz
v: height 486 start 489 end 494 total 506 clock 59.92Hz
864x486 (0x551) 30.500MHz +HSync -VSync
h: width 864 start 912 end 944 total 1024 skew 0 clock 29.79KHz
v: height 486 start 489 end 494 total 500 clock 59.57Hz
640x480 (0x552) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x405 (0x553) 22.500MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 25.11KHz
v: height 405 start 408 end 413 total 422 clock 59.51Hz
720x405 (0x554) 22.176MHz -HSync +VSync
h: width 720 start 728 end 800 total 880 skew 0 clock 25.20KHz
v: height 405 start 406 end 409 total 420 clock 60.00Hz
720x405 (0x555) 21.750MHz +HSync -VSync
h: width 720 start 768 end 800 total 880 skew 0 clock 24.72KHz
v: height 405 start 408 end 413 total 419 clock 58.99Hz
640x360 (0x556) 18.000MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock 22.50KHz
v: height 360 start 363 end 368 total 376 clock 59.84Hz
640x360 (0x557) 17.750MHz +HSync -VSync
h: width 640 start 688 end 720 total 800 skew 0 clock 22.19KHz
v: height 360 start 363 end 368 total 374 clock 59.32Hz
640x360 (0x558) 17.187MHz -HSync +VSync
h: width 640 start 640 end 704 total 768 skew 0 clock 22.38KHz
v: height 360 start 361 end 364 total 373 clock 60.00Hzseth wrote:
and your Xorg log
This is my Xorg.0.log
[ 4.851] (--) Log file renamed from "/var/log/Xorg.pid-982.log" to "/var/log/Xorg.0.log"
[ 4.852]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 4.852] Current Operating System: Linux ArchKDE 6.5.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 10 Oct 2023 21:10:21 +0000 x86_64
[ 4.852] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3e2b2a14-044b-48df-84cf-6d4a9314d4d9 rw loglevel=3 quiet
[ 4.852]
[ 4.852] Current version of pixman: 0.42.2
[ 4.852] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 4.852] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.852] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 15 01:10:44 2023
[ 4.854] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.854] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.856] (==) No Layout section. Using the first Screen section.
[ 4.856] (==) No screen section available. Using defaults.
[ 4.856] (**) |-->Screen "Default Screen Section" (0)
[ 4.856] (**) | |-->Monitor "<default monitor>"
[ 4.856] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4.856] (**) | |-->Device "Intel Graphics"
[ 4.856] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.856] (==) Automatically adding devices
[ 4.856] (==) Automatically enabling devices
[ 4.856] (==) Automatically adding GPU devices
[ 4.856] (==) Automatically binding GPU devices
[ 4.856] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.857] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 4.857] Entry deleted from font path.
[ 4.857] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 4.857] Entry deleted from font path.
[ 4.857] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 4.857] Entry deleted from font path.
[ 4.859] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 4.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.859] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.859] (II) Module ABI versions:
[ 4.859] X.Org ANSI C Emulation: 0.4
[ 4.859] X.Org Video Driver: 25.2
[ 4.859] X.Org XInput driver : 24.4
[ 4.859] X.Org Server Extension : 10.0
[ 4.860] (++) using VT number 2
[ 4.860] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.861] (II) xfree86: Adding drm device (/dev/dri/card2)
[ 4.861] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card2
[ 4.861] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.861] (II) Platform probe for /sys/devices/pci0000:00/0000:00:1c.0/0000:2b:00.0/drm/card1
[ 4.864] (--) PCI:*(0@0:2:0) 8086:9a49:1028:0a01 rev 1, Mem @ 0x6034000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 4.864] (--) PCI: (43@0:0:0) 10de:1d16:1028:0a01 rev 161, Mem @ 0x81000000/16777216, 0x6020000000/268435456, 0x6030000000/33554432, I/O @ 0x00003000/128
[ 4.864] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.864] (II) LoadModule: "glx"
[ 4.864] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.871] (II) Module glx: vendor="X.Org Foundation"
[ 4.871] compiled for 1.21.1.8, module version = 1.0.0
[ 4.871] ABI class: X.Org Server Extension, version 10.0
[ 4.871] (II) LoadModule: "intel"
[ 4.871] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.873] (II) Module intel: vendor="X.Org Foundation"
[ 4.873] compiled for 1.21.1.6, module version = 2.99.917
[ 4.873] Module class: X.Org Video Driver
[ 4.873] ABI class: X.Org Video Driver, version 25.2
[ 4.873] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.874] (II) intel: Driver for Intel(R) HD Graphics
[ 4.874] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 4.874] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 4.880] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 4.880] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[ 4.881] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 4.881] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 4.881] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.881] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.881] (==) intel(0): RGB weight 888
[ 4.881] (==) intel(0): Default visual is TrueColor
[ 4.881] (**) intel(0): Option "NoAccel" "True"
[ 4.881] (**) intel(0): Option "DRI" "false"
[ 4.881] (II) intel(0): Output eDP1 has no monitor section
[ 4.881] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 4.881] (II) intel(0): Enabled output eDP1
[ 4.881] (II) intel(0): Output HDMI1 has no monitor section
[ 4.881] (II) intel(0): Enabled output HDMI1
[ 4.881] (II) intel(0): Output DP1 has no monitor section
[ 4.881] (II) intel(0): Enabled output DP1
[ 4.881] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 4.881] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.881] (II) intel(0): Enabled output VIRTUAL1
[ 4.881] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 4.882] (==) intel(0): TearFree enabled
[ 4.882] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.882] (++) intel(0): DPI set to (96, 96)
[ 4.882] (II) Loading sub module "dri3"
[ 4.882] (II) LoadModule: "dri3"
[ 4.882] (II) Module "dri3" already built-in
[ 4.882] (II) Loading sub module "dri2"
[ 4.882] (II) LoadModule: "dri2"
[ 4.882] (II) Module "dri2" already built-in
[ 4.882] (II) Loading sub module "present"
[ 4.882] (II) LoadModule: "present"
[ 4.882] (II) Module "present" already built-in
[ 4.882] (II) intel(0): SNA initialized with disabled backend
[ 4.882] (==) intel(0): Backing store enabled
[ 4.882] (==) intel(0): Silken mouse enabled
[ 4.882] (II) intel(0): HW Cursor enabled
[ 4.882] (==) intel(0): DPMS enabled
[ 4.882] (==) intel(0): Display hotplug detection enabled
[ 4.883] (II) intel(0): Textured video not supported on this hardware or backend
[ 4.883] (II) intel(0): hardware support for Present enabled
[ 4.883] (II) Initializing extension Generic Event Extension
[ 4.883] (II) Initializing extension SHAPE
[ 4.883] (II) Initializing extension MIT-SHM
[ 4.883] (II) Initializing extension XInputExtension
[ 4.883] (II) Initializing extension XTEST
[ 4.883] (II) Initializing extension BIG-REQUESTS
[ 4.883] (II) Initializing extension SYNC
[ 4.883] (II) Initializing extension XKEYBOARD
[ 4.883] (II) Initializing extension XC-MISC
[ 4.883] (II) Initializing extension SECURITY
[ 4.883] (II) Initializing extension XFIXES
[ 4.884] (II) Initializing extension RENDER
[ 4.884] (II) Initializing extension RANDR
[ 4.884] (II) Initializing extension COMPOSITE
[ 4.884] (II) Initializing extension DAMAGE
[ 4.884] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.884] (II) Initializing extension DOUBLE-BUFFER
[ 4.884] (II) Initializing extension RECORD
[ 4.884] (II) Initializing extension DPMS
[ 4.884] (II) Initializing extension Present
[ 4.884] (II) Initializing extension DRI3
[ 4.884] (II) Initializing extension X-Resource
[ 4.884] (II) Initializing extension XVideo
[ 4.884] (II) Initializing extension XVideo-MotionCompensation
[ 4.884] (II) Initializing extension GLX
[ 4.884] (II) AIGLX: Screen 0 is not DRI2 capable
[ 5.021] (II) IGLX: Loaded and initialized swrast
[ 5.021] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 5.021] (II) Initializing extension XFree86-VidModeExtension
[ 5.021] (II) Initializing extension XFree86-DGA
[ 5.021] (II) Initializing extension XFree86-DRI
[ 5.021] (II) Initializing extension DRI2
[ 5.022] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 5.028] (II) intel(0): Setting screen physical size to 508 x 285
[ 5.075] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 5.075] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.075] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.075] (II) LoadModule: "libinput"
[ 5.076] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.078] (II) Module libinput: vendor="X.Org Foundation"
[ 5.078] compiled for 1.21.1.8, module version = 1.4.0
[ 5.078] Module class: X.Org XInput Driver
[ 5.078] ABI class: X.Org XInput driver, version 24.4
[ 5.078] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.078] (**) Video Bus: always reports core events
[ 5.078] (**) Option "Device" "/dev/input/event11"
[ 5.082] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 5.082] (II) event11 - Video Bus: device is a keyboard
[ 5.082] (II) event11 - Video Bus: device removed
[ 5.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event11"
[ 5.160] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 5.160] (**) Option "xkb_layout" "br"
[ 5.160] (**) Option "xkb_variant" "abnt2"
[ 5.184] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 5.184] (II) event11 - Video Bus: device is a keyboard
[ 5.185] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 5.185] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.185] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.185] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.185] (**) Video Bus: always reports core events
[ 5.185] (**) Option "Device" "/dev/input/event12"
[ 5.186] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 5.186] (II) event12 - Video Bus: device is a keyboard
[ 5.186] (II) event12 - Video Bus: device removed
[ 5.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3d/LNXVIDEO:01/input/input17/event12"
[ 5.253] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.253] (**) Option "xkb_layout" "br"
[ 5.253] (**) Option "xkb_variant" "abnt2"
[ 5.255] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 5.255] (II) event12 - Video Bus: device is a keyboard
[ 5.256] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.256] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.256] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.256] (II) Using input driver 'libinput' for 'Power Button'
[ 5.256] (**) Power Button: always reports core events
[ 5.256] (**) Option "Device" "/dev/input/event1"
[ 5.257] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.257] (II) event1 - Power Button: device is a keyboard
[ 5.257] (II) event1 - Power Button: device removed
[ 5.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 5.280] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5.280] (**) Option "xkb_layout" "br"
[ 5.280] (**) Option "xkb_variant" "abnt2"
[ 5.281] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.281] (II) event1 - Power Button: device is a keyboard
[ 5.282] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 5.282] (II) No input driver specified, ignoring this device.
[ 5.282] (II) This device may have been added with another device file.
[ 5.283] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 5.283] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 5.283] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 5.283] (II) Using input driver 'libinput' for 'Sleep Button'
[ 5.283] (**) Sleep Button: always reports core events
[ 5.283] (**) Option "Device" "/dev/input/event2"
[ 5.284] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 5.284] (II) event2 - Sleep Button: device is a keyboard
[ 5.284] (II) event2 - Sleep Button: device removed
[ 5.306] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 5.306] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 5.306] (**) Option "xkb_layout" "br"
[ 5.307] (**) Option "xkb_variant" "abnt2"
[ 5.308] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 5.308] (II) event2 - Sleep Button: device is a keyboard
[ 5.310] (II) config/udev: Adding input device DLL09D9:00 04F3:3146 Mouse (/dev/input/event9)
[ 5.310] (**) DLL09D9:00 04F3:3146 Mouse: Applying InputClass "libinput pointer catchall"
[ 5.310] (II) Using input driver 'libinput' for 'DLL09D9:00 04F3:3146 Mouse'
[ 5.310] (**) DLL09D9:00 04F3:3146 Mouse: always reports core events
[ 5.310] (**) Option "Device" "/dev/input/event9"
[ 5.311] (II) event9 - DLL09D9:00 04F3:3146 Mouse: is tagged by udev as: Mouse Pointingstick
[ 5.312] (II) event9 - DLL09D9:00 04F3:3146 Mouse: device is a pointer
[ 5.312] (II) event9 - DLL09D9:00 04F3:3146 Mouse: device removed
[ 5.350] (II) libinput: DLL09D9:00 04F3:3146 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.350] (II) libinput: DLL09D9:00 04F3:3146 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.350] (II) libinput: DLL09D9:00 04F3:3146 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.350] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL09D9:00/0018:04F3:3146.0001/input/input13/event9"
[ 5.350] (II) XINPUT: Adding extended input device "DLL09D9:00 04F3:3146 Mouse" (type: MOUSE, id 10)
[ 5.350] (**) Option "AccelerationScheme" "none"
[ 5.350] (**) DLL09D9:00 04F3:3146 Mouse: (accel) selected scheme none/0
[ 5.350] (**) DLL09D9:00 04F3:3146 Mouse: (accel) acceleration factor: 2.000
[ 5.350] (**) DLL09D9:00 04F3:3146 Mouse: (accel) acceleration threshold: 4
[ 5.352] (II) event9 - DLL09D9:00 04F3:3146 Mouse: is tagged by udev as: Mouse Pointingstick
[ 5.352] (II) event9 - DLL09D9:00 04F3:3146 Mouse: device is a pointer
[ 5.354] (II) config/udev: Adding input device DLL09D9:00 04F3:3146 Mouse (/dev/input/mouse1)
[ 5.354] (II) No input driver specified, ignoring this device.
[ 5.354] (II) This device may have been added with another device file.
[ 5.355] (II) config/udev: Adding input device DLL09D9:00 04F3:3146 Touchpad (/dev/input/event10)
[ 5.355] (**) DLL09D9:00 04F3:3146 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.355] (II) Using input driver 'libinput' for 'DLL09D9:00 04F3:3146 Touchpad'
[ 5.355] (**) DLL09D9:00 04F3:3146 Touchpad: always reports core events
[ 5.355] (**) Option "Device" "/dev/input/event10"
[ 5.356] (II) event10 - DLL09D9:00 04F3:3146 Touchpad: is tagged by udev as: Touchpad
[ 5.359] (II) event10 - DLL09D9:00 04F3:3146 Touchpad: device is a touchpad
[ 5.359] (II) event10 - DLL09D9:00 04F3:3146 Touchpad: device removed
[ 5.393] (II) libinput: DLL09D9:00 04F3:3146 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.393] (II) libinput: DLL09D9:00 04F3:3146 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.393] (II) libinput: DLL09D9:00 04F3:3146 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.394] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL09D9:00/0018:04F3:3146.0001/input/input14/event10"
[ 5.394] (II) XINPUT: Adding extended input device "DLL09D9:00 04F3:3146 Touchpad" (type: TOUCHPAD, id 11)
[ 5.396] (**) Option "AccelerationScheme" "none"
[ 5.396] (**) DLL09D9:00 04F3:3146 Touchpad: (accel) selected scheme none/0
[ 5.396] (**) DLL09D9:00 04F3:3146 Touchpad: (accel) acceleration factor: 2.000
[ 5.396] (**) DLL09D9:00 04F3:3146 Touchpad: (accel) acceleration threshold: 4
[ 5.398] (II) event10 - DLL09D9:00 04F3:3146 Touchpad: is tagged by udev as: Touchpad
[ 5.400] (II) event10 - DLL09D9:00 04F3:3146 Touchpad: device is a touchpad
[ 5.402] (II) config/udev: Adding input device DLL09D9:00 04F3:3146 Touchpad (/dev/input/mouse2)
[ 5.402] (II) No input driver specified, ignoring this device.
[ 5.402] (II) This device may have been added with another device file.
[ 5.402] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event13)
[ 5.402] (II) No input driver specified, ignoring this device.
[ 5.402] (II) This device may have been added with another device file.
[ 5.403] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 5.403] (II) No input driver specified, ignoring this device.
[ 5.403] (II) This device may have been added with another device file.
[ 5.403] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 5.403] (II) No input driver specified, ignoring this device.
[ 5.403] (II) This device may have been added with another device file.
[ 5.404] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 5.404] (II) No input driver specified, ignoring this device.
[ 5.404] (II) This device may have been added with another device file.
[ 5.404] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[ 5.404] (II) No input driver specified, ignoring this device.
[ 5.404] (II) This device may have been added with another device file.
[ 5.405] (II) config/udev: Adding input device Intel HID events (/dev/input/event4)
[ 5.405] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[ 5.405] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 5.405] (II) Using input driver 'libinput' for 'Intel HID events'
[ 5.405] (**) Intel HID events: always reports core events
[ 5.405] (**) Option "Device" "/dev/input/event4"
[ 5.406] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 5.406] (II) event4 - Intel HID events: device is a keyboard
[ 5.406] (II) event4 - Intel HID events: device removed
[ 5.430] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input5/event4"
[ 5.430] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[ 5.430] (**) Option "xkb_layout" "br"
[ 5.430] (**) Option "xkb_variant" "abnt2"
[ 5.431] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 5.431] (II) event4 - Intel HID events: device is a keyboard
[ 5.432] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event5)
[ 5.432] (**) Intel HID 5 button array: Applying InputClass "evdev keyboard catchall"
[ 5.432] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 5.432] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 5.432] (**) Intel HID 5 button array: always reports core events
[ 5.432] (**) Option "Device" "/dev/input/event5"
[ 5.433] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 5.433] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 5.433] (II) event5 - Intel HID 5 button array: device removed
[ 5.466] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input6/event5"
[ 5.466] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 13)
[ 5.466] (**) Option "xkb_layout" "br"
[ 5.466] (**) Option "xkb_variant" "abnt2"
[ 5.468] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 5.468] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 5.469] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 5.469] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 5.469] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.469] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 5.469] (**) Dell WMI hotkeys: always reports core events
[ 5.469] (**) Option "Device" "/dev/input/event7"
[ 5.470] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 5.470] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 5.471] (II) event7 - Dell WMI hotkeys: device removed
[ 5.510] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9/event7"
[ 5.510] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 5.510] (**) Option "xkb_layout" "br"
[ 5.510] (**) Option "xkb_variant" "abnt2"
[ 5.512] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 5.512] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 5.513] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 5.513] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.513] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.513] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5.513] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.513] (**) Option "Device" "/dev/input/event3"
[ 5.514] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.515] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.516] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 5.536] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 5.537] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 5.537] (**) Option "xkb_layout" "br"
[ 5.537] (**) Option "xkb_variant" "abnt2"
[ 5.538] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.538] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.540] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event8)
[ 5.540] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[ 5.540] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[ 5.540] (**) PS/2 Generic Mouse: always reports core events
[ 5.540] (**) Option "Device" "/dev/input/event8"
[ 5.542] (II) event8 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 5.542] (II) event8 - PS/2 Generic Mouse: device is a pointer
[ 5.542] (II) event8 - PS/2 Generic Mouse: device removed
[ 5.580] (II) libinput: PS/2 Generic Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.580] (II) libinput: PS/2 Generic Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.580] (II) libinput: PS/2 Generic Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.580] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event8"
[ 5.580] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 16)
[ 5.580] (**) Option "AccelerationScheme" "none"
[ 5.580] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[ 5.580] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 5.580] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 5.581] (II) event8 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 5.582] (II) event8 - PS/2 Generic Mouse: device is a pointer
[ 5.583] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 5.583] (II) No input driver specified, ignoring this device.
[ 5.583] (II) This device may have been added with another device file.
[ 5.583] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 5.583] (II) No input driver specified, ignoring this device.
[ 5.583] (II) This device may have been added with another device file.
[ 6.884] (II) intel(0): EDID vendor "NCP", prod id 43
[ 6.884] (II) intel(0): Printing DDC gathered Modelines:
[ 6.884] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 6.884] (II) intel(0): Modeline "1920x1080"x0.0 110.90 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.3 kHz e)Last edited by tbernardes (2023-10-15 17:13:25)
Offline
#4 2023-10-15 06:41:34
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,654
Re: KDE: xorg broke DPI and font size
Please use [code][/code] tags, not "quote" tags. Edit your post in this regard.
Why are you trying to set the DPI to 96? That would render everything almost half the size it's supposed to be.
But "Zoomed in" would suggest the system renders on a higher DPI than you anticipate.
Sanity check: what's your default font size? Anything 9-11pt?
I suspect you're running into Qt adjusting to the physical resolution, you can control that w/ https://wiki.archlinux.org/title/HiDPI#GUI_toolkits but I recommend to *not* do that, abandon the idea of 96dpi and configure the system properly around it's actual DPI (i "properly" - DPI agnostic)
Edit: you most likely also want to drop xf86-video-intel
Last edited by seth (2023-10-15 06:56:42)
Offline