[SOLVED] "Failed to start Virtual Console Setup" after last update

xenobro · 2023-10-16 17:44:33

Hi, seth.

I rebooted by hitting Ctrl+Alt+Del after the system hanged for a few minutes on boot as usual.
What should I do next?

Thank you very much,
xenobro.

Last edited by xenobro (2023-10-16 22:19:02)

solskog · 2023-10-17 03:03:59

drwxr-sr-x+ 2 root systemd-journal   4096 set 27 10:11 journal

how come the time stamp is much older then the rest of directories?

# strings /var/log/journal/b1136321eb70450da894be72fca8e0ef/system.journal | grep -i message > /tmp/log

Last edited by solskog (2023-10-17 03:23:02)

xenobro · 2023-10-17 03:21:23

I hadn't even noticed that. And it's especially strange, since it was the last created directory. Let me boot up that drive and check the date.

solskog · 2023-10-17 03:24:21

# strings /var/log/journal/b1136321eb70450da894be72fca8e0ef/system.journal | grep -i message > /tmp/log

xenobro · 2023-10-17 03:29:32

I'm posting from that system now.
The system date is correct, only that folder is dated strangely.
Also, I cannot execute the command you posted, since there is nothing inside /var/log/journal, even during execution.
I could however find 2 directories under /run/log/journal:

strings /run/log/journal/b8b5*/system.journal | grep -i message >b8b5a78bc3dd446893d7ca9110a51b1b.txt
MESSAGE=Received SIGTERM from PID 1 (systemd).
MESSAGE
MESSAGE=systemd 254.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
MESSAGE=Detected architecture x86-64.
MESSAGE=bpf-lsm: LSM BPF program attached
MESSAGE=/etc/systemd/system/systemd-vconsole-setup.service:21: Unknown key name 'WantedBy' in section 'Service', ignoring.
MESSAGE=initrd-switch-root.service: Deactivated successfully.
MESSAGE=systemd-journald.service: Scheduled restart job, restart counter is at 1.
MESSAGE=Created slice Slice /system/getty.
MESSAGE=Created slice Slice /system/modprobe.
MESSAGE=Created slice Slice /system/systemd-fsck.
MESSAGE=Started Dispatch Password Requests to Console Directory Watch.
MESSAGE=Set up automount Arbitrary Executable File Formats File System Automount Point.
MESSAGE=Reached target Local Encrypted Volumes.
MESSAGE=Stopped target Switch Root.
MESSAGE=Reached target Local Integrity Protected Volumes.
MESSAGE=Reached target Local Verity Protected Volumes.
MESSAGE=Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
MESSAGE=Listening on udev Control Socket.
MESSAGE=Listening on udev Kernel Socket.
MESSAGE=Mounting Huge Pages File System...
MESSAGE=Mounting POSIX Message Queue File System...
MESSAGE=Mounting Kernel Debug File System...
MESSAGE=Mounting Kernel Trace File System...
MESSAGE=tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
MESSAGE=Mounting Temporary Directory /tmp...
MESSAGE=Starting Create List of Static Device Nodes...
MESSAGE=Starting Load Kernel Module configfs...
MESSAGE=Starting Load Kernel Module dm_mod...
MESSAGE=Starting Load Kernel Module efi_pstore...
MESSAGE=Starting Load Kernel Module fuse...
MESSAGE=Starting Load Kernel Module loop...
MESSAGE=Starting Journal Service...
MESSAGE=Starting Load Kernel Modules...
MESSAGE=Starting Generate network units from Kernel command line...
MESSAGE=loop: module loaded
MESSAGE=TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
MESSAGE=Starting Remount Root and Kernel File Systems...
MESSAGE=fuse: init (API version 7.38)
MESSAGE=Starting Coldplug All udev Devices...
MESSAGE=Mounted Huge Pages File System.
MESSAGE=Mounted POSIX Message Queue File System.
MESSAGE=Mounted Kernel Debug File System.
MESSAGE=Mounted Kernel Trace File System.
MESSAGE=Mounted Temporary Directory /tmp.
MESSAGE=Collecting audit messages is disabled.
MESSAGE_ID=f77379a8490b408bbe5f6940505a777b
MESSAGE_ID
MESSAGE=Journal started
MESSAGE_ID=ec387f577b844b8fa948f33cad9a75e6
MESSAGE=Runtime Journal (/run/log/journal/b8b5a78bc3dd446893d7ca9110a51b1b) is 8.0M, max 153.3M, 145.3M free.
MESSAGE_ID=7ad2d189f7e94e70a38c781354912448
MESSAGE=systemd-journald.service: Deactivated successfully.
MESSAGE=Finished Create List of Static Device Nodes.
MESSAGE=EXT4-fs (sda2): re-mounted 60c60104-132a-4195-b74b-07c2adb65cba r/w. Quota mode: none.
MESSAGE=Started Journal Service.
MESSAGE=device-mapper: uevent: version 1.0.3
MESSAGE=device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
MESSAGE=modprobe@configfs.service: Deactivated successfully.
MESSAGE=Inserted module 'crypto_user'
CODE_FUNC=job_emit_done_message
MESSAGE=Finished Load Kernel Module configfs.
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE=modprobe@dm_mod.service: Deactivated successfully.
MESSAGE=Finished Load Kernel Module dm_mod.
MESSAGE=modprobe@efi_pstore.service: Deactivated successfully.
MESSAGE=Finished Load Kernel Module efi_pstore.
MESSAGE=modprobe@fuse.service: Deactivated successfully.
MESSAGE=Finished Load Kernel Module fuse.
MESSAGE=modprobe@loop.service: Deactivated successfully.
MESSAGE=Finished Load Kernel Module loop.
MESSAGE=Finished Load Kernel Modules.
MESSAGE=Finished Generate network units from Kernel command line.
MESSAGE=Finished Remount Root and Kernel File Systems.
MESSAGE=Finished Coldplug All udev Devices.
MESSAGE=Reached target Preparation for Network.
CODE_FUNC=job_emit_start_message
MESSAGE=Mounting FUSE Control File System...
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE=Mounting Kernel Configuration File System...
MESSAGE=Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
MESSAGE=Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
MESSAGE=Starting Load/Save OS Random Seed...
MESSAGE=Repartition Root Disk was skipped because no trigger condition checks were met.
MESSAGE=Starting Apply Kernel Variables...
MESSAGE=Starting Create Static Device Nodes in /dev gracefully...
MESSAGE=Mounted FUSE Control File System.
MESSAGE=Mounted Kernel Configuration File System.
MESSAGE=Finished Load/Save OS Random Seed.
MESSAGE=Finished Apply Kernel Variables.
MESSAGE=Finished Create Static Device Nodes in /dev gracefully.
MESSAGE=Create System Users was skipped because no trigger condition checks were met.
MESSAGE=Starting Create Static Device Nodes in /dev...
MESSAGE=Finished Create Static Device Nodes in /dev.
MESSAGE=Reached target Preparation for Local File Systems.
MESSAGE=Mounting /home...
MESSAGE=Mounting /var/tmp...
MESSAGE=Starting Rule-based Manager for Device Events and Files...
MESSAGE=Mounted /home.
MESSAGE=Mounted /var/tmp.
MESSAGE=Using default interface naming scheme 'v253'.
MESSAGE=Started Rule-based Manager for Device Events and Files.
MESSAGE=Created slice Slice /system/systemd-backlight.
MESSAGE=Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
MESSAGE=i801_smbus 0000:00:1f.4: SPD Write Disable is set
MESSAGE=i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
MESSAGE=i2c i2c-11: 1/2 memory slots populated (from DMI)
MESSAGE=i2c i2c-11: Successfully instantiated SPD at 0x50
MESSAGE=EDAC igen6: v2.5.1
MESSAGE=Finished Load/Save Screen Backlight Brightness of backlight:intel_backlight.
MESSAGE=Consider using thermal netlink events interface
MESSAGE=mei_me 0000:00:16.0: enabling device (0000 -> 0002)
MESSAGE=input: PC Speaker as /devices/platform/pcspkr/input/input5
MESSAGE=cfg80211: Loading compiled-in X.509 certificates for regulatory database
MESSAGE=Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
MESSAGE=intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
MESSAGE=idma64 idma64.0: Found Intel integrated DMA 64-bit
MESSAGE=intel_rapl_msr: PL4 support detected.
MESSAGE=intel_rapl_common: Found RAPL domain package
MESSAGE=intel_rapl_common: Found RAPL domain core
MESSAGE=intel_rapl_common: Found RAPL domain uncore
MESSAGE=intel_rapl_common: Found RAPL domain psys
MESSAGE=iTCO_vendor_support: vendor-support=0
MESSAGE=Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
MESSAGE=spi-nor spi0.0: spi-nor-generic (16384 Kbytes)
MESSAGE=Creating 1 MTD partitions on "0000:00:1f.5":
MESSAGE=0x000000000000-0x000001000000 : "BIOS"
MESSAGE=Bluetooth: Core ver 2.22
MESSAGE=NET: Registered PF_BLUETOOTH protocol family
MESSAGE=Bluetooth: HCI device and connection manager initialized
MESSAGE=Bluetooth: HCI socket layer initialized
MESSAGE=Bluetooth: L2CAP socket layer initialized
MESSAGE=Bluetooth: SCO socket layer initialized
MESSAGE=mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
MESSAGE=resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
MESSAGE=caller __uncore_imc_init_box+0xfa/0x150 [intel_uncore] mapping multiple BARs
MESSAGE=platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
MESSAGE=cfg80211: failed to load regulatory.db
MESSAGE=Starting Setup Virtual Console...
MESSAGE=ee1004 11-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
MESSAGE=Intel(R) Wireless WiFi driver for Linux
MESSAGE=iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
MESSAGE=iwlwifi 0000:00:14.3: Detected crf-id 0x2816, cnv-id 0x20000302 wfpm id 0x80000000
MESSAGE=iwlwifi 0000:00:14.3: PCI dev a0f0/02a4, rev=0x351, rfid=0x108110
MESSAGE=r8169 0000:02:00.0 eth0: RTL8168h/8111h, 98:83:89:fd:b9:f4, XID 541, IRQ 151
MESSAGE=r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
MESSAGE=mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
MESSAGE=checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"
MESSAGE=checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7"
MESSAGE=bus: 3, device: 2 was not an MTP device
MESSAGE=bus: 3, device: 3 was not an MTP device
MESSAGE=input: PNP0C50:01 0911:5288 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input6
MESSAGE=input: PNP0C50:01 0911:5288 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input7
MESSAGE=input: PNP0C50:01 0911:5288 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input8
MESSAGE=hid-generic 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [PNP0C50:01 0911:5288] on i2c-PNP0C50:01
MESSAGE=iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
MESSAGE=iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
MESSAGE=iwlwifi 0000:00:14.3: loaded firmware version 77.206b0184.0 QuZ-a0-jf-b0-77.ucode op_mode iwlmvm
MESSAGE=proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
MESSAGE=RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
MESSAGE=RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
MESSAGE=RAPL PMU: hw unit of domain package 2^-14 Joules
MESSAGE=RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
MESSAGE=RAPL PMU: hw unit of domain psys 2^-14 Joules
MESSAGE=r8169 0000:02:00.0 enp2s0: renamed from eth0
MESSAGE=cryptd: max_cpu_qlen set to 1000
MESSAGE=iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
MESSAGE=iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
MESSAGE=input: PNP0C50:01 0911:5288 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input9
MESSAGE=input: PNP0C50:01 0911:5288 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input10
MESSAGE=input: PNP0C50:01 0911:5288 UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input11
MESSAGE=hid-multitouch 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [PNP0C50:01 0911:5288] on i2c-PNP0C50:01
MESSAGE=mousedev: PS/2 mouse device common for all mice
MESSAGE=AVX2 version of gcm_enc/dec engaged.
MESSAGE=AES CTR mode by8 optimization enabled
MESSAGE=mc: Linux media interface: v0.10
MESSAGE=usbcore: registered new interface driver btusb
MESSAGE=Bluetooth: hci0: Bootloader revision 0.0 build 0 week 30 2018
MESSAGE=Bluetooth: hci0: Device revision is 2
MESSAGE=Bluetooth: hci0: Secure boot is enabled
MESSAGE=Bluetooth: hci0: OTP lock is enabled
MESSAGE=Bluetooth: hci0: API lock is enabled
MESSAGE=Bluetooth: hci0: Debug lock is disabled
MESSAGE=Bluetooth: hci0: Minimum firmware build 1 week 10 2014
MESSAGE=videodev: Linux video capture interface: v2.00
MESSAGE=Starting Load/Save RF Kill Switch Status...
MESSAGE=snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
MESSAGE=snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
MESSAGE=snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
MESSAGE=Started Load/Save RF Kill Switch Status.
MESSAGE=iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9462, REV=0x351
MESSAGE=thermal thermal_zone5: failed to read out thermal zone (-61)
MESSAGE=Bluetooth: hci0: Found device firmware: intel/ibt-19-0-0.sfi
MESSAGE=Bluetooth: hci0: Boot Address: 0x24800
MESSAGE=Bluetooth: hci0: Firmware Version: 206-22.23
MESSAGE=usb 3-7: Found UVC 1.00 device VGA camera (13d3:5a24)
MESSAGE=usbcore: registered new interface driver uvcvideo
MESSAGE=snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
MESSAGE=snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
MESSAGE=snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
MESSAGE=snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
MESSAGE=snd_hda_codec_realtek hdaudioC0D0:    inputs:
MESSAGE=snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
MESSAGE=input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
MESSAGE=input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
MESSAGE=input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
MESSAGE=input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
MESSAGE=input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
MESSAGE=iwlwifi 0000:00:14.3: base HW address: 80:b6:55:b6:fb:0c
MESSAGE=iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
MESSAGE=intel_tcc_cooling: TCC Offset locked
MESSAGE=Condition check resulted in Ultra_Fit 1 being skipped.
MESSAGE=Starting File System Check on /dev/disk/by-uuid/4354-283A...
MESSAGE=systemd-vconsole-setup.service: Deactivated successfully.
MESSAGE=Finished Setup Virtual Console.
MESSAGE=controlC0: Process '/usr/bin/alsactl restore 0' failed with exit code 2.
MESSAGE=fsck.fat 4.2 (2021-01-31)
MESSAGE=/dev/sda1: 371 files, 183035/201616 clusters
MESSAGE=Finished File System Check on /dev/disk/by-uuid/4354-283A.
MESSAGE=Mounting /boot...
MESSAGE=Mounted /boot.
MESSAGE=Reached target Local File Systems.
MESSAGE=Rebuild Dynamic Linker Cache was skipped because no trigger condition checks were met.
MESSAGE=Set Up Additional Binary Formats was skipped because no trigger condition checks were met.
MESSAGE=Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
MESSAGE=Starting Automatic Boot Loader Update...
MESSAGE=Starting Create Volatile Files and Directories...
MESSAGE=Finished Automatic Boot Loader Update.
MESSAGE=Finished Create Volatile Files and Directories.
MESSAGE=First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
MESSAGE=First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
MESSAGE=Rebuild Journal Catalog was skipped because of an unmet condition check (ConditionNeedsUpdate=/var).
MESSAGE=Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
MESSAGE=Starting Network Name Resolution...
MESSAGE=Starting Network Time Synchronization...
MESSAGE=Update is Completed was skipped because no trigger condition checks were met.
MESSAGE=Starting Record System Boot/Shutdown in UTMP...
MESSAGE=Finished Record System Boot/Shutdown in UTMP.
MESSAGE=Started Network Time Synchronization.
MESSAGE=Reached target System Time Set.
MESSAGE=Positive Trust Anchors:
MESSAGE=. IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
MESSAGE=Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa corp home internal intranet lan local private test
MESSAGE=Bluetooth: hci0: Waiting for firmware download to complete
MESSAGE=Bluetooth: hci0: Firmware loaded in 1654195 usecs
MESSAGE=Bluetooth: hci0: Waiting for device to boot
MESSAGE=Bluetooth: hci0: Malformed MSFT vendor event: 0x02
MESSAGE=Bluetooth: hci0: Device booted in 14867 usecs
MESSAGE=Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-0.ddc
MESSAGE=Bluetooth: hci0: Applying Intel DDC parameters completed
MESSAGE=Bluetooth: hci0: Firmware revision 0.0 build 206 week 22 2023
MESSAGE=Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
MESSAGE=Using system hostname 'archlinux'.
MESSAGE=Started Network Name Resolution.
MESSAGE=Reached target Host and Network Name Lookups.
MESSAGE=Reached target System Initialization.
MESSAGE=Listening on D-Bus System Message Bus Socket.
MESSAGE=Starting Save/Restore Sound Card State...
MESSAGE=Manage Sound Card State (restore and store) was skipped because of an unmet condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
MESSAGE=Starting Bluetooth service...
MESSAGE=bluetooth.service: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
MESSAGE=Started Getty on tty1.
MESSAGE=Reached target Login Prompts.
MESSAGE=TPM2 PCR Barrier (Initialization) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
MESSAGE=TPM2 PCR Barrier (User) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
MESSAGE=Starting D-Bus System Message Bus...
MESSAGE=Finished Save/Restore Sound Card State.
MESSAGE=Reached target Sound Card.
MESSAGE=Bluetooth daemon 5.70
MESSAGE=Started D-Bus System Message Bus.
MESSAGE=Started Bluetooth service.
MESSAGE=Reached target Bluetooth Support.
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE=Startup finished in 5.059s (firmware) + 4.816s (loader) + 7.034s (kernel) + 3.612s (initrd) + 6.394s (userspace) = 26.918s.
MESSAGE=Starting SDP server
MESSAGE=src/plugin.c:plugin_init() System does not support csip plugin
MESSAGE=profiles/audio/micp.c:micp_init() D-Bus experimental not enabled
MESSAGE=src/plugin.c:plugin_init() System does not support micp plugin
MESSAGE=src/plugin.c:plugin_init() System does not support vcp plugin
MESSAGE=src/plugin.c:plugin_init() System does not support mcp plugin
MESSAGE=src/plugin.c:plugin_init() System does not support bass plugin
MESSAGE=src/plugin.c:plugin_init() System does not support bap plugin
MESSAGE=Bluetooth: BNEP (Ethernet Emulation) ver 1.3
MESSAGE=Bluetooth: BNEP filters: protocol multicast
MESSAGE=Bluetooth: BNEP socket layer initialized
MESSAGE=Bluetooth management interface 1.22 initialized
MESSAGE=[system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.2' (uid=0 pid=429 comm="/usr/lib/bluetooth/bluetoothd")
MESSAGE=Bluetooth: MGMT ver 1.22
MESSAGE=NET: Registered PF_ALG protocol family
MESSAGE=Starting Hostname Service...
MESSAGE=[system] Successfully activated service 'org.freedesktop.hostname1'
MESSAGE=Started Hostname Service.
MESSAGE=ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
MESSAGE=systemd-rfkill.service: Deactivated successfully.
MESSAGE=pam_unix(login:session): session opened for user root(uid=0) by root(uid=0)
MESSAGE=[system] Activating via systemd: service name='org.freedesktop.login1' unit='dbus-org.freedesktop.login1.service' requested by ':1.6' (uid=0 pid=430 comm="/bin/login -p --     ")
MESSAGE=Created slice User and Session Slice.
MESSAGE=Starting Load Kernel Module drm...
MESSAGE=modprobe@drm.service: Deactivated successfully.
MESSAGE=Finished Load Kernel Module drm.
MESSAGE=Starting User Login Management...
MESSAGE_ID=fcbefc5da23d428093f97c82a9290f7b
MESSAGE=New seat seat0.
MESSAGE=Watching system buttons on /dev/input/event2 (Power Button)
MESSAGE=Watching system buttons on /dev/input/event1 (Power Button)
MESSAGE=Watching system buttons on /dev/input/event0 (Lid Switch)
MESSAGE=Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard)
MESSAGE=Started User Login Management.
MESSAGE=[system] Successfully activated service 'org.freedesktop.login1'
MESSAGE_ID=8d45620c1a4348dbb17410da57c60c66
MESSAGE=New session 1 of user root.
MESSAGE=Created slice User Slice of UID 0.
MESSAGE=Starting User Runtime Directory /run/user/0...
MESSAGE=Finished User Runtime Directory /run/user/0.
MESSAGE=Starting User Manager for UID 0...
MESSAGE=pam_nologin(systemd-user:account): conversation failed
MESSAGE=pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[root] ruser=[<unknown>] rhost=[<unknown>]
MESSAGE=pam_unix(systemd-user:session): session opened for user root(uid=0) by root(uid=0)
MESSAGE=Queued start job for default target Main User Target.
MESSAGE=Created slice User Application Slice.
MESSAGE=Reached target Paths.
MESSAGE=Reached target Timers.
MESSAGE=Starting D-Bus User Message Bus Socket...
MESSAGE=Listening on GnuPG network certificate management daemon.
MESSAGE=Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
MESSAGE=Listening on GnuPG cryptographic agent and passphrase cache (restricted).
MESSAGE=Listening on GnuPG cryptographic agent (ssh-agent emulation).
MESSAGE=Listening on GnuPG cryptographic agent and passphrase cache.
MESSAGE=Listening on p11-kit server.
MESSAGE=Listening on PipeWire Multimedia System Socket.
MESSAGE=Sound System was skipped because of an unmet condition check (ConditionUser=!root).
MESSAGE=Listening on D-Bus User Message Bus Socket.
MESSAGE=Reached target Sockets.
MESSAGE=Reached target Basic System.
MESSAGE=Reached target Main User Target.
MESSAGE_ID=eed00a68ffd84e31882105fd973abdd1
MESSAGE=Startup finished in 227ms.
MESSAGE=Started User Manager for UID 0.
MESSAGE=Started Session 1 of User root.
MESSAGE=ROOT LOGIN ON tty1
MESSAGE=systemd-hostnamed.service: Deactivated successfully.
MESSAGE=    root : TTY=tty1 ; PWD=/root ; USER=root ; COMMAND=/usr/bin/wifi on
MESSAGE=pam_unix(sudo:session): session opened for user root(uid=0) by root(uid=0)
MESSAGE=iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
MESSAGE=dhcpcd-10.0.2 starting
MESSAGE=DUID 00:01:00:01:2b:f5:ac:b4:80:b6:55:b6:fb:0c
MESSAGE=8021q: 802.1Q VLAN Support v1.8
MESSAGE=wlo1: waiting for carrier
MESSAGE=wlo1: authenticate with c0:3d:d9:62:9d:8f
MESSAGE=wlo1: send auth to c0:3d:d9:62:9d:8f (try 1/3)
MESSAGE=wlo1: authenticated
MESSAGE=wlo1: associate with c0:3d:d9:62:9d:8f (try 1/3)
MESSAGE=wlo1: RX AssocResp from c0:3d:d9:62:9d:8f (capab=0x511 status=0 aid=70)
MESSAGE=wlo1: associated
MESSAGE=wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by c0:3d:d9:62:9d:8f
MESSAGE=wlo1: carrier acquired
MESSAGE=wlo1: connected to Access Point: XNET-5G
MESSAGE=wlo1: IAID 55:b6:fb:0c
MESSAGE=wlo1: adding address fe80::9a34:1b28:28ca:181a
MESSAGE=wlo1: soliciting an IPv6 router
MESSAGE=wlo1: soliciting a DHCP lease
MESSAGE=wlo1: offered 192.168.0.45 from 192.168.0.1
MESSAGE=wlo1: probing address 192.168.0.45/24
MESSAGE=wlo1: Router Advertisement from fe80::c23d:d9ff:fe62:9d88
MESSAGE=wlo1: adding address xxx/64
MESSAGE=wlo1: adding route to xxx/64
MESSAGE=wlo1: requesting DHCPv6 information
MESSAGE=wlo1: adding default route via fe80::c23d:d9ff:fe62:9d88
MESSAGE=wlo1: REPLY6 received from fe80::c23d:d9ff:fe62:9d88
MESSAGE=wlo1: refresh in 86400 seconds
MESSAGE=wlo1: leased 192.168.0.45 for 14400 seconds
MESSAGE=wlo1: adding route to 192.168.0.0/24
MESSAGE=wlo1: adding default route via 192.168.0.1
MESSAGE=pam_unix(sudo:session): session closed for user root
MESSAGE=Clock change detected. Flushing caches.
MESSAGE=Contacted time server [2606:4700:f1::1]:123 (2.arch.pool.ntp.org).
MESSAGE=Initial clock synchronization to Tue 2023-10-17 00:24:51.178706 -03.
MESSAGE_ID=7c8a41f37b764941a0e1780b1be2f037
MESSAGE=Created slice User Core Session Slice.
MESSAGE=Starting D-Bus User Message Bus...
MESSAGE=Started D-Bus User Message Bus.
MESSAGE=[session uid=0 pid=802] Successfully activated service 'org.freedesktop.systemd1'
MESSAGE=firefox[815]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
MESSAGE=[system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' requested by ':1.13' (uid=0 pid=815 comm="/usr/lib/firefox/firefox")
MESSAGE=Starting Time & Date Service...
MESSAGE=[system] Successfully activated service 'org.freedesktop.timedate1'
MESSAGE=Started Time & Date Service.
MESSAGE=[session uid=0 pid=802] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.2' (uid=0 pid=815 comm="/usr/lib/firefox/firefox")
MESSAGE=Starting Accessibility services bus...
MESSAGE=[session uid=0 pid=802] Successfully activated service 'org.a11y.Bus'
MESSAGE=Started Accessibility services bus.
MESSAGE=[system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.15' (uid=0 pid=971 comm="/usr/lib/firefox/firefox -contentproc -childID 1 -")
MESSAGE=Starting RealtimeKit Scheduling Policy Service...
MESSAGE=[system] Successfully activated service 'org.freedesktop.RealtimeKit1'
MESSAGE=Started RealtimeKit Scheduling Policy Service.
MESSAGE=Successfully called chroot.
MESSAGE=Successfully dropped privileges.
MESSAGE=Successfully limited resources.
MESSAGE=Running.
MESSAGE=Watchdog thread running.
MESSAGE=Canary thread running.
MESSAGE=Supervising 0 threads of 0 processes of 0 users.
MESSAGE=[system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.16' (uid=0 pid=980 comm="/usr/lib/rtkit-daemon")
MESSAGE=Starting Authorization Manager...
MESSAGE=Started polkitd version 123
MESSAGE=Loading rules from directory /etc/polkit-1/rules.d
MESSAGE=Loading rules from directory /usr/share/polkit-1/rules.d
MESSAGE=Finished loading, compiling and executing 4 rules
MESSAGE=[system] Successfully activated service 'org.freedesktop.PolicyKit1'
MESSAGE=Started Authorization Manager.
MESSAGE=Acquired the name org.freedesktop.PolicyKit1 on the system bus
MESSAGE=Successfully made thread 989 of process 815 owned by '0' RT at priority 10.
MESSAGE=Supervising 1 threads of 1 processes of 1 users.
MESSAGE=systemd-timedated.service: Deactivated successfully.

 strings /run/log/journal/f8e6*/system.journal | grep -i message >f8e645dc179544cfabc623fd3436205e.txt

MESSAGE=microcode: updated early: 0x8a -> 0xac, date = 2023-02-27
MESSAGE
MESSAGE=Linux version 6.5.7-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Tue, 10 Oct 2023 21:10:21 +0000
MESSAGE=Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=60c60104-132a-4195-b74b-07c2adb65cba rw loglevel=7 audit=0 systemd.unit=getty.target
MESSAGE=x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
MESSAGE=BIOS-provided physical RAM map:
MESSAGE=BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
MESSAGE=BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
MESSAGE=BIOS-e820: [mem 0x0000000000100000-0x000000003dfc9fff] usable
MESSAGE=BIOS-e820: [mem 0x000000003dfca000-0x000000003dfcafff] reserved
MESSAGE=BIOS-e820: [mem 0x000000003dfcb000-0x000000003e3bbfff] usable
MESSAGE=BIOS-e820: [mem 0x000000003e3bc000-0x00000000435b4fff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000435b5000-0x0000000043680fff] ACPI data
MESSAGE=BIOS-e820: [mem 0x0000000043681000-0x000000004373afff] ACPI NVS
MESSAGE=BIOS-e820: [mem 0x000000004373b000-0x00000000447fefff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000447ff000-0x00000000447fffff] usable
MESSAGE=BIOS-e820: [mem 0x0000000044800000-0x000000004affffff] reserved
MESSAGE=BIOS-e820: [mem 0x000000004b300000-0x000000004f7fffff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
MESSAGE=BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
MESSAGE=BIOS-e820: [mem 0x0000000100000000-0x00000002b07fffff] usable
MESSAGE=NX (Execute Disable) protection: active
MESSAGE=efi: EFI v2.7 by American Megatrends
MESSAGE=efi: ACPI=0x43680000 ACPI 2.0=0x43680014 TPMFinalLog=0x436c7000 SMBIOS=0x44604000 SMBIOS 3.0=0x44603000 MEMATTR=0x3a382018 ESRT=0x3c800518 INITRD=0x3a191b18 RNG=0x435f3018 TPMEventLog=0x39498018 
MESSAGE=random: crng init done
MESSAGE=efi: Remove mem64: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
MESSAGE=e820: remove [mem 0xc0000000-0xcfffffff] reserved
MESSAGE=efi: Not removing mem65: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
MESSAGE=efi: Not removing mem66: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
MESSAGE=efi: Not removing mem67: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
MESSAGE=efi: Not removing mem69: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
MESSAGE=efi: Remove mem70: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
MESSAGE=e820: remove [mem 0xff000000-0xffffffff] reserved
MESSAGE=SMBIOS 3.3.0 present.
MESSAGE=DMI: SAMSUNG ELECTRONICS CO., LTD. 550XDA/NP550XDA-KH2BR, BIOS P19CFB.048.230411.HQ 04/11/2023
MESSAGE=tsc: Detected 2400.000 MHz processor
MESSAGE=tsc: Detected 2419.200 MHz TSC
MESSAGE=e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
MESSAGE=e820: remove [mem 0x000a0000-0x000fffff] usable
MESSAGE=last_pfn = 0x2b0800 max_arch_pfn = 0x400000000
MESSAGE=MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
MESSAGE=x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
MESSAGE=last_pfn = 0x44800 max_arch_pfn = 0x400000000
MESSAGE=esrt: Reserving ESRT space from 0x000000003c800518 to 0x000000003c8005a0.
MESSAGE=e820: update [mem 0x3c800000-0x3c800fff] usable ==> reserved
MESSAGE=Using GB pages for direct mapping
MESSAGE=Secure boot disabled
MESSAGE=RAMDISK: [mem 0x357bf000-0x36e5ffff]
MESSAGE=ACPI: Early table checksum verification disabled
MESSAGE=ACPI: RSDP 0x0000000043680014 000024 (v02 SECCSD)
MESSAGE=ACPI: XSDT 0x000000004367F728 0000FC (v01 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: FACP 0x000000004367A000 000114 (v06 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: DSDT 0x0000000043626000 053D47 (v02 SECCSD LH43STAR 01072009 INTL 20191018)
MESSAGE=ACPI: FACS 0x0000000043737000 000040
MESSAGE=ACPI: MCFG 0x000000004367E000 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00000097)
MESSAGE=ACPI: SSDT 0x000000004367B000 00255D (v02 CpuRef CpuSsdt  00003000 INTL 20191018)
MESSAGE=ACPI: FIDT 0x0000000043625000 00009C (v01 SECCSD LH43STAR 01072009 AMI  00010013)
MESSAGE=ACPI: MSDM 0x0000000043624000 000055 (v03 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: SSDT 0x0000000043620000 003D0E (v02 DptfTb DptfTabl 00001000 INTL 20191018)
MESSAGE=ACPI: SSDT 0x000000004361D000 002CC7 (v02 SaSsdt SaSsdt   00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0x0000000043619000 003350 (v02 INTEL  IgfxSsdt 00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0x000000004360D000 00B1B2 (v02 INTEL  TcssSsdt 00001000 INTL 20191018)
MESSAGE=ACPI: HPET 0x000000004360C000 000038 (v01 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: APIC 0x000000004360B000 00012C (v04 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: SSDT 0x0000000043605000 005C77 (v02 SECCSD TglU_Rvp 00001000 INTL 20191018)
MESSAGE=ACPI: SSDT 0x0000000043604000 000E11 (v02 SECCSD Ther_Rvp 00001000 INTL 20191018)
MESSAGE=ACPI: NHLT 0x0000000043603000 00002D (v00 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: LPIT 0x0000000043602000 0000CC (v01 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: SSDT 0x00000000435FE000 002720 (v02 SECCSD PtidDevc 00001000 INTL 20191018)
MESSAGE=ACPI: SSDT 0x00000000435FD000 00012A (v02 SECCSD TbtTypeC 00000000 INTL 20191018)
MESSAGE=ACPI: DBGP 0x00000000435FC000 000034 (v01 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: DBG2 0x00000000435FB000 000054 (v00 SECCSD LH43STAR 01072009 AMI  01000013)
MESSAGE=ACPI: DMAR 0x00000000435FA000 000088 (v02 INTEL  EDK2     00000002      01000013)
MESSAGE=ACPI: SSDT 0x00000000435F9000 0009F9 (v02 INTEL  xh_tudd4 00000000 INTL 20191018)
MESSAGE=ACPI: SSDT 0x00000000435F8000 000144 (v02 Intel  ADebTabl 00001000 INTL 20191018)
MESSAGE=ACPI: BGRT 0x00000000435F7000 000038 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
MESSAGE=ACPI: TPM2 0x00000000435F6000 00004C (v04 SECCSD LH43STAR 00000001 AMI  00000000)
MESSAGE=ACPI: PTDT 0x00000000435F5000 000D44 (v00 SECCSD LH43STAR 00000005 MSFT 0100000D)
MESSAGE=ACPI: WSMT 0x0000000043601000 000028 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
MESSAGE=ACPI: FPDT 0x00000000435F4000 000044 (v01 SECCSD A M I    01072009 AMI  01000013)
MESSAGE=ACPI: Reserving FACP table memory at [mem 0x4367a000-0x4367a113]
MESSAGE=ACPI: Reserving DSDT table memory at [mem 0x43626000-0x43679d46]
MESSAGE=ACPI: Reserving FACS table memory at [mem 0x43737000-0x4373703f]
MESSAGE=ACPI: Reserving MCFG table memory at [mem 0x4367e000-0x4367e03b]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x4367b000-0x4367d55c]
MESSAGE=ACPI: Reserving FIDT table memory at [mem 0x43625000-0x4362509b]
MESSAGE=ACPI: Reserving MSDM table memory at [mem 0x43624000-0x43624054]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x43620000-0x43623d0d]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x4361d000-0x4361fcc6]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x43619000-0x4361c34f]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x4360d000-0x436181b1]
MESSAGE=ACPI: Reserving HPET table memory at [mem 0x4360c000-0x4360c037]
MESSAGE=ACPI: Reserving APIC table memory at [mem 0x4360b000-0x4360b12b]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x43605000-0x4360ac76]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x43604000-0x43604e10]
MESSAGE=ACPI: Reserving NHLT table memory at [mem 0x43603000-0x4360302c]
MESSAGE=ACPI: Reserving LPIT table memory at [mem 0x43602000-0x436020cb]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x435fe000-0x4360071f]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x435fd000-0x435fd129]
MESSAGE=ACPI: Reserving DBGP table memory at [mem 0x435fc000-0x435fc033]
MESSAGE=ACPI: Reserving DBG2 table memory at [mem 0x435fb000-0x435fb053]
MESSAGE=ACPI: Reserving DMAR table memory at [mem 0x435fa000-0x435fa087]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x435f9000-0x435f99f8]
MESSAGE=ACPI: Reserving SSDT table memory at [mem 0x435f8000-0x435f8143]
MESSAGE=ACPI: Reserving BGRT table memory at [mem 0x435f7000-0x435f7037]
MESSAGE=ACPI: Reserving TPM2 table memory at [mem 0x435f6000-0x435f604b]
MESSAGE=ACPI: Reserving PTDT table memory at [mem 0x435f5000-0x435f5d43]
MESSAGE=ACPI: Reserving WSMT table memory at [mem 0x43601000-0x43601027]
MESSAGE=ACPI: Reserving FPDT table memory at [mem 0x435f4000-0x435f4043]
MESSAGE=No NUMA configuration found
MESSAGE=Faking a node at [mem 0x0000000000000000-0x00000002b07fffff]
MESSAGE=NODE_DATA(0) allocated [mem 0x2b07fb000-0x2b07fffff]
MESSAGE=Zone ranges:
MESSAGE=  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
MESSAGE=  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
MESSAGE=  Normal   [mem 0x0000000100000000-0x00000002b07fffff]
MESSAGE=  Device   empty
MESSAGE=Movable zone start for each node
MESSAGE=Early memory node ranges
MESSAGE=  node   0: [mem 0x0000000000001000-0x000000000009efff]
MESSAGE=  node   0: [mem 0x0000000000100000-0x000000003dfc9fff]
MESSAGE=  node   0: [mem 0x000000003dfcb000-0x000000003e3bbfff]
MESSAGE=  node   0: [mem 0x00000000447ff000-0x00000000447fffff]
MESSAGE=  node   0: [mem 0x0000000100000000-0x00000002b07fffff]
MESSAGE=Initmem setup node 0 [mem 0x0000000000001000-0x00000002b07fffff]
MESSAGE=On node 0, zone DMA: 1 pages in unavailable ranges
MESSAGE=On node 0, zone DMA: 97 pages in unavailable ranges
MESSAGE=On node 0, zone DMA32: 1 pages in unavailable ranges
MESSAGE=On node 0, zone DMA32: 25667 pages in unavailable ranges
MESSAGE=On node 0, zone Normal: 14336 pages in unavailable ranges
MESSAGE=On node 0, zone Normal: 30720 pages in unavailable ranges
MESSAGE=Reserving Intel graphics memory at [mem 0x4d800000-0x4f7fffff]
MESSAGE=ACPI: PM-Timer IO Port: 0x1808
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
MESSAGE=ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
MESSAGE=IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
MESSAGE=ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
MESSAGE=ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
MESSAGE=ACPI: Using ACPI (MADT) for SMP configuration information
MESSAGE=ACPI: HPET id: 0x8086a201 base: 0xfed00000
MESSAGE=e820: update [mem 0x3a2c5000-0x3a2dffff] usable ==> reserved
MESSAGE=TSC deadline timer available
MESSAGE=smpboot: Allowing 8 CPUs, 0 hotplug CPUs
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x3a2c5000-0x3a2dffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x3c800000-0x3c800fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x3dfca000-0x3dfcafff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x3e3bc000-0x435b4fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x435b5000-0x43680fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x43681000-0x4373afff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x4373b000-0x447fefff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x44800000-0x4affffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x4b2fffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x4b300000-0x4f7fffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0x4f800000-0xfdffffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
MESSAGE=PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
MESSAGE=[mem 0x4f800000-0xfdffffff] available for PCI devices
MESSAGE=Booting paravirtualized kernel on bare hardware
MESSAGE=clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
MESSAGE=setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
MESSAGE=percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
MESSAGE=pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
MESSAGE=pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
MESSAGE=Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=60c60104-132a-4195-b74b-07c2adb65cba rw loglevel=7 audit=0 systemd.unit=getty.target
MESSAGE=audit: disabled (until reboot)
MESSAGE=Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
MESSAGE=Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
MESSAGE=Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
MESSAGE=Fallback order for Node 0: 0 
MESSAGE=Built 1 zonelists, mobility grouping on.  Total pages: 1994509
MESSAGE=Policy zone: Normal
MESSAGE=mem auto-init: stack:all(zero), heap alloc:on, heap free:off
MESSAGE=software IO TLB: area num 8.
MESSAGE=Memory: 7719464K/8105320K available (16384K kernel code, 2123K rwdata, 12956K rodata, 3384K init, 3916K bss, 385596K reserved, 0K cma-reserved)
MESSAGE=SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
MESSAGE=ftrace: allocating 48464 entries in 190 pages
MESSAGE=ftrace: allocated 190 pages with 6 groups
MESSAGE=Dynamic Preempt: full
MESSAGE=rcu: Preemptible hierarchical RCU implementation.
MESSAGE=rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
MESSAGE=rcu: 	RCU priority boosting: priority 1 delay 500 ms.
MESSAGE=	Trampoline variant of Tasks RCU enabled.
MESSAGE=	Rude variant of Tasks RCU enabled.
MESSAGE=	Tracing variant of Tasks RCU enabled.
MESSAGE=rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
MESSAGE=rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
MESSAGE=NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
MESSAGE=rcu: srcu_init: Setting srcu_struct sizes based on contention.
MESSAGE=kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
MESSAGE=Console: colour dummy device 80x25
MESSAGE=printk: console [tty0] enabled
MESSAGE=ACPI: Core revision 20230331
MESSAGE=hpet: HPET dysfunctional in PC10. Force disabled.
MESSAGE=APIC: Switch to symmetric I/O mode setup
MESSAGE=DMAR: Host address width 39
MESSAGE=DMAR: DRHD base: 0x000000fed90000 flags: 0x0
MESSAGE=DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 69e2ff0505e
MESSAGE=DMAR: DRHD base: 0x000000fed91000 flags: 0x1
MESSAGE=DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
MESSAGE=DMAR: RMRR base: 0x0000004d000000 end: 0x0000004f7fffff
MESSAGE=DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
MESSAGE=DMAR-IR: HPET id 0 under DRHD base 0xfed91000
MESSAGE=DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
MESSAGE=DMAR-IR: Enabled IRQ remapping in x2apic mode
MESSAGE=x2apic enabled
MESSAGE=Switched APIC routing to cluster x2apic.
MESSAGE=clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
MESSAGE=Calibrating delay loop (skipped), value calculated using timer frequency.. 4840.00 BogoMIPS (lpj=8064000)
MESSAGE=CPU0: Thermal monitoring enabled (TM1)
MESSAGE=x86/cpu: User Mode Instruction Prevention (UMIP) activated
MESSAGE=process: using mwait in idle threads
MESSAGE=CET detected: Indirect Branch Tracking enabled
MESSAGE=Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
MESSAGE=Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
MESSAGE=Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
MESSAGE=Spectre V2 : Mitigation: Enhanced / Automatic IBRS
MESSAGE=Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
MESSAGE=Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
MESSAGE=Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
MESSAGE=Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MESSAGE=GDS: Mitigation: Microcode
MESSAGE=x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
MESSAGE=x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
MESSAGE=x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
MESSAGE=x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
MESSAGE=x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
MESSAGE=x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
MESSAGE=x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
MESSAGE=x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
MESSAGE=x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
MESSAGE=x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
MESSAGE=x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
MESSAGE=x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
MESSAGE=x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
MESSAGE=Freeing SMP alternatives memory: 40K
MESSAGE=pid_max: default: 32768 minimum: 301
MESSAGE=LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
MESSAGE=landlock: Up and running.
MESSAGE=Yama: becoming mindful.
MESSAGE=LSM support for eBPF active
MESSAGE=Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
MESSAGE=Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
MESSAGE=smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1)
MESSAGE=RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
MESSAGE=RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
MESSAGE=RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
MESSAGE=Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
MESSAGE=... version:                5
MESSAGE=... bit width:              48
MESSAGE=... generic registers:      8
MESSAGE=... value mask:             0000ffffffffffff
MESSAGE=... max period:             00007fffffffffff
MESSAGE=... fixed-purpose events:   4
MESSAGE=... event mask:             0001000f000000ff
MESSAGE=signal: max sigframe size: 3632
MESSAGE=Estimated ratio of average max frequency by base frequency (times 1024): 1621
MESSAGE=rcu: Hierarchical SRCU implementation.
MESSAGE=rcu: 	Max phase no-delay instances is 1000.
MESSAGE=NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
MESSAGE=smp: Bringing up secondary CPUs ...
MESSAGE=smpboot: x86: Booting SMP configuration:
MESSAGE=.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
MESSAGE=smp: Brought up 1 node, 8 CPUs
MESSAGE=smpboot: Max logical packages: 1
MESSAGE=smpboot: Total of 8 processors activated (38722.00 BogoMIPS)
MESSAGE=devtmpfs: initialized
MESSAGE=x86/mm: Memory block size: 128MB
MESSAGE=ACPI: PM: Registering ACPI NVS region [mem 0x43681000-0x4373afff] (761856 bytes)
MESSAGE=clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
MESSAGE=futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
MESSAGE=pinctrl core: initialized pinctrl subsystem
MESSAGE=PM: RTC time: 03:23:04, date: 2023-10-17
MESSAGE=NET: Registered PF_NETLINK/PF_ROUTE protocol family
MESSAGE=DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
MESSAGE=DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
MESSAGE=DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
MESSAGE=thermal_sys: Registered thermal governor 'fair_share'
MESSAGE=thermal_sys: Registered thermal governor 'bang_bang'
MESSAGE=thermal_sys: Registered thermal governor 'step_wise'
MESSAGE=thermal_sys: Registered thermal governor 'user_space'
MESSAGE=thermal_sys: Registered thermal governor 'power_allocator'
MESSAGE=cpuidle: using governor ladder
MESSAGE=cpuidle: using governor menu
MESSAGE=acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
MESSAGE=PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
MESSAGE=PCI: not using MMCONFIG
MESSAGE=PCI: Using configuration type 1 for base access
MESSAGE=ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
MESSAGE=kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
MESSAGE=HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
MESSAGE=HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
MESSAGE=HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
MESSAGE=HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
MESSAGE=fbcon: Taking over console
MESSAGE=ACPI: Added _OSI(Module Device)
MESSAGE=ACPI: Added _OSI(Processor Device)
MESSAGE=ACPI: Added _OSI(3.0 _SCP Extensions)
MESSAGE=ACPI: Added _OSI(Processor Aggregator Device)
MESSAGE=ACPI: 12 ACPI AML tables successfully acquired and loaded
MESSAGE=ACPI: Dynamic OEM Table Load:
MESSAGE=ACPI: SSDT 0xFFFF89F141828A00 0001CB (v02 PmRef  Cpu0Psd  00003000 INTL 20191018)
MESSAGE=ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
MESSAGE=ACPI: SSDT 0xFFFF89F14113D800 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20191018)
MESSAGE=ACPI: SSDT 0xFFFF89F1417FF800 0005C3 (v02 PmRef  Cpu0Ist  00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0xFFFF89F14113A000 000266 (v02 PmRef  Cpu0Hwp  00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0xFFFF89F1417F3000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0xFFFF89F1417FB800 00048A (v02 PmRef  ApHwp    00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0xFFFF89F1417F9800 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20191018)
MESSAGE=ACPI: SSDT 0xFFFF89F1417F8800 00048A (v02 PmRef  ApCst    00003000 INTL 20191018)
MESSAGE=ACPI: EC: EC started
MESSAGE=ACPI: EC: interrupt blocked
MESSAGE=ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
MESSAGE=ACPI: \_SB_.PC00.LPCB.H_EC: Boot DSDT EC used to handle transactions
MESSAGE=ACPI: Interpreter enabled
MESSAGE=ACPI: PM: (supports S0 S3 S4 S5)
MESSAGE=ACPI: Using IOAPIC for interrupt routing
MESSAGE=PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
MESSAGE=PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
MESSAGE=PCI: Ignoring E820 reservations for host bridge windows
MESSAGE=ACPI: Enabled 8 GPEs in block 00 to 7F
MESSAGE=ACPI: \_SB_.PC00.RP04.PXP_: New power resource
MESSAGE=ACPI: \_SB_.PC00.RP05.PXP_: New power resource
MESSAGE=ACPI: \_SB_.PC00.RP08.PXP_: New power resource
MESSAGE=ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource
MESSAGE=ACPI: \_SB_.PC00.PAUD: New power resource
MESSAGE=ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
MESSAGE=ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
MESSAGE=ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
MESSAGE=ACPI: \_SB_.PC00.I2C0.PXTC: New power resource
MESSAGE=ACPI: \_SB_.PC00.I2C0.PTPL: New power resource
MESSAGE=ACPI: \_SB_.PC00.I2C1.PXTC: New power resource
MESSAGE=ACPI: \_SB_.PC00.I2C2.PXTC: New power resource
MESSAGE=ACPI: \_SB_.PC00.CNVW.WRST: New power resource
MESSAGE=ACPI: \_SB_.PC00.TBT0: New power resource
MESSAGE=ACPI: \_SB_.PC00.TBT1: New power resource
MESSAGE=ACPI: \_SB_.PC00.D3C_: New power resource
MESSAGE=ACPI: \_TZ_.FN00: New power resource
MESSAGE=ACPI: \_TZ_.FN01: New power resource
MESSAGE=ACPI: \_TZ_.FN02: New power resource
MESSAGE=ACPI: \_TZ_.FN03: New power resource
MESSAGE=ACPI: \_TZ_.FN04: New power resource
MESSAGE=ACPI: \PIN_: New power resource
MESSAGE=ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
MESSAGE=acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
MESSAGE=acpi PNP0A08:00: _OSC: platform does not support [AER]
MESSAGE=acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
MESSAGE=PCI host bridge to bus 0000:00
MESSAGE=pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
MESSAGE=pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
MESSAGE=pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
MESSAGE=pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
MESSAGE=pci_bus 0000:00: root bus resource [mem 0x4f800000-0xbfffffff window]
MESSAGE=pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
MESSAGE=pci_bus 0000:00: root bus resource [bus 00-fe]
MESSAGE=pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000
MESSAGE=pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000
MESSAGE=pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
MESSAGE=pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
MESSAGE=pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
MESSAGE=pci 0000:00:02.0: BAR 2: assigned to efifb
MESSAGE=pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
MESSAGE=pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
MESSAGE=pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
MESSAGE=pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
MESSAGE=pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
MESSAGE=pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
MESSAGE=pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
MESSAGE=pci 0000:00:04.0: reg 0x10: [mem 0x6001100000-0x600111ffff 64bit]
MESSAGE=pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000
MESSAGE=pci 0000:00:08.0: reg 0x10: [mem 0x6001150000-0x6001150fff 64bit]
MESSAGE=pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330
MESSAGE=pci 0000:00:0d.0: reg 0x10: [mem 0x6001130000-0x600113ffff 64bit]
MESSAGE=pci 0000:00:0d.0: PME# supported from D3hot D3cold
MESSAGE=pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
MESSAGE=pci 0000:00:14.0: reg 0x10: [mem 0x6001120000-0x600112ffff 64bit]
MESSAGE=pci 0000:00:14.0: PME# supported from D3hot D3cold
MESSAGE=pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
MESSAGE=pci 0000:00:14.2: reg 0x10: [mem 0x6001148000-0x600114bfff 64bit]
MESSAGE=pci 0000:00:14.2: reg 0x18: [mem 0x600114f000-0x600114ffff 64bit]
MESSAGE=pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
MESSAGE=pci 0000:00:14.3: reg 0x10: [mem 0x6001144000-0x6001147fff 64bit]
MESSAGE=pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
MESSAGE=pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
MESSAGE=pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
MESSAGE=pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
MESSAGE=pci 0000:00:16.0: reg 0x10: [mem 0x600114d000-0x600114dfff 64bit]
MESSAGE=pci 0000:00:16.0: PME# supported from D3hot
MESSAGE=pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601
MESSAGE=pci 0000:00:17.0: reg 0x10: [mem 0x4fb00000-0x4fb01fff]
MESSAGE=pci 0000:00:17.0: reg 0x14: [mem 0x4fb03000-0x4fb030ff]
MESSAGE=pci 0000:00:17.0: reg 0x18: [io  0x4090-0x4097]
MESSAGE=pci 0000:00:17.0: reg 0x1c: [io  0x4080-0x4083]
MESSAGE=pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
MESSAGE=pci 0000:00:17.0: reg 0x24: [mem 0x4fb02000-0x4fb027ff]
MESSAGE=pci 0000:00:17.0: PME# supported from D3hot
MESSAGE=pci 0000:00:1c.0: [8086:a0bc] type 01 class 0x060400
MESSAGE=pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
MESSAGE=pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
MESSAGE=pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400
MESSAGE=pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
MESSAGE=pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
MESSAGE=pci 0000:00:1d.1: [8086:a0b1] type 01 class 0x060400
MESSAGE=pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
MESSAGE=pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
MESSAGE=pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
MESSAGE=pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040380
MESSAGE=pci 0000:00:1f.3: reg 0x10: [mem 0x6001140000-0x6001143fff 64bit]
MESSAGE=pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
MESSAGE=pci 0000:00:1f.3: PME# supported from D3hot D3cold
MESSAGE=pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
MESSAGE=pci 0000:00:1f.4: reg 0x10: [mem 0x600114c000-0x600114c0ff 64bit]
MESSAGE=pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
MESSAGE=pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
MESSAGE=pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
MESSAGE=pci 0000:01:00.0: [144d:a809] type 00 class 0x010802
MESSAGE=pci 0000:01:00.0: reg 0x10: [mem 0x4fa00000-0x4fa03fff 64bit]
MESSAGE=pci 0000:00:1c.0: PCI bridge to [bus 01]
MESSAGE=pci 0000:00:1c.0:   bridge window [mem 0x4fa00000-0x4fafffff]
MESSAGE=pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
MESSAGE=pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
MESSAGE=pci 0000:02:00.0: reg 0x18: [mem 0x4f904000-0x4f904fff 64bit]
MESSAGE=pci 0000:02:00.0: reg 0x20: [mem 0x4f900000-0x4f903fff 64bit]
MESSAGE=pci 0000:02:00.0: supports D1 D2
MESSAGE=pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
MESSAGE=pci 0000:00:1d.0: PCI bridge to [bus 02]
MESSAGE=pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
MESSAGE=pci 0000:00:1d.0:   bridge window [mem 0x4f900000-0x4f9fffff]
MESSAGE=pci 0000:03:00.0: [1217:8621] type 00 class 0x080501
MESSAGE=pci 0000:03:00.0: reg 0x10: [mem 0x4f801000-0x4f801fff]
MESSAGE=pci 0000:03:00.0: reg 0x14: [mem 0x4f800000-0x4f8007ff]
MESSAGE=pci 0000:03:00.0: PME# supported from D3hot D3cold
MESSAGE=pci 0000:00:1d.1: PCI bridge to [bus 03]
MESSAGE=pci 0000:00:1d.1:   bridge window [mem 0x4f800000-0x4f8fffff]
MESSAGE=ACPI: PCI: Interrupt link LNKA configured for IRQ 0
MESSAGE=ACPI: PCI: Interrupt link LNKB configured for IRQ 1
MESSAGE=ACPI: PCI: Interrupt link LNKC configured for IRQ 0
MESSAGE=ACPI: PCI: Interrupt link LNKD configured for IRQ 0
MESSAGE=ACPI: PCI: Interrupt link LNKE configured for IRQ 0
MESSAGE=ACPI: PCI: Interrupt link LNKF configured for IRQ 0
MESSAGE=ACPI: PCI: Interrupt link LNKG configured for IRQ 0
MESSAGE=ACPI: PCI: Interrupt link LNKH configured for IRQ 0
MESSAGE=Low-power S0 idle used by default for system suspend
MESSAGE=ACPI: EC: interrupt unblocked
MESSAGE=ACPI: EC: event unblocked
MESSAGE=ACPI: EC: 2 stale EC events cleared
MESSAGE=ACPI: EC: GPE=0x6e
MESSAGE=ACPI: \_SB_.PC00.LPCB.H_EC: Boot DSDT EC initialization complete
MESSAGE=ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
MESSAGE=iommu: Default domain type: Translated
MESSAGE=iommu: DMA domain TLB invalidation policy: lazy mode
MESSAGE=SCSI subsystem initialized
MESSAGE=libata version 3.00 loaded.
MESSAGE=ACPI: bus type USB registered
MESSAGE=usbcore: registered new interface driver usbfs
MESSAGE=usbcore: registered new interface driver hub
MESSAGE=usbcore: registered new device driver usb
MESSAGE=pps_core: LinuxPPS API ver. 1 registered
MESSAGE=pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
MESSAGE=PTP clock support registered
MESSAGE=EDAC MC: Ver: 3.0.0
MESSAGE=efivars: Registered efivars operations
MESSAGE=NetLabel: Initializing
MESSAGE=NetLabel:  domain hash size = 128
MESSAGE=NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
MESSAGE=NetLabel:  unlabeled traffic allowed by default
MESSAGE=mctp: management component transport protocol core
MESSAGE=NET: Registered PF_MCTP protocol family
MESSAGE=PCI: Using ACPI for IRQ routing
MESSAGE=PCI: pci_cache_line_size set to 64 bytes
MESSAGE=pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
MESSAGE=e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
MESSAGE=e820: reserve RAM buffer [mem 0x3a2c5000-0x3bffffff]
MESSAGE=e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
MESSAGE=e820: reserve RAM buffer [mem 0x3dfca000-0x3fffffff]
MESSAGE=e820: reserve RAM buffer [mem 0x3e3bc000-0x3fffffff]
MESSAGE=e820: reserve RAM buffer [mem 0x44800000-0x47ffffff]
MESSAGE=e820: reserve RAM buffer [mem 0x2b0800000-0x2b3ffffff]
MESSAGE=pci 0000:00:02.0: vgaarb: setting as boot VGA device
MESSAGE=pci 0000:00:02.0: vgaarb: bridge control possible
MESSAGE=pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
MESSAGE=vgaarb: loaded
MESSAGE=clocksource: Switched to clocksource tsc-early
MESSAGE=VFS: Disk quotas dquot_6.6.0
MESSAGE=VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
MESSAGE=pnp: PnP ACPI init
MESSAGE=system 00:00: [io  0x0680-0x069f] has been reserved
MESSAGE=system 00:00: [io  0x164e-0x164f] has been reserved
MESSAGE=system 00:01: [io  0x1854-0x1857] has been reserved
MESSAGE=pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
MESSAGE=system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
MESSAGE=system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
MESSAGE=system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
MESSAGE=system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
MESSAGE=system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
MESSAGE=system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
MESSAGE=system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
MESSAGE=system 00:04: [mem 0xfe400700-0xfe4007ff] has been reserved
MESSAGE=system 00:05: [io  0x1800-0x18fe] could not be reserved
MESSAGE=system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
MESSAGE=system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved
MESSAGE=system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved
MESSAGE=system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved
MESSAGE=system 00:05: [mem 0xfe200000-0xfe7fffff] could not be reserved
MESSAGE=system 00:05: [mem 0xff000000-0xffffffff] has been reserved
MESSAGE=system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
MESSAGE=system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
MESSAGE=system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
MESSAGE=system 00:06: [io  0x2000-0x20fe] has been reserved
MESSAGE=pnp: PnP ACPI: found 8 devices
MESSAGE=clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
MESSAGE=NET: Registered PF_INET protocol family
MESSAGE=IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
MESSAGE=tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
MESSAGE=Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
MESSAGE=TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
MESSAGE=TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
MESSAGE=TCP: Hash tables configured (established 65536 bind 65536)
MESSAGE=MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
MESSAGE=UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
MESSAGE=UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
MESSAGE=NET: Registered PF_UNIX/PF_LOCAL protocol family
MESSAGE=NET: Registered PF_XDP protocol family
MESSAGE=pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
MESSAGE=pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
MESSAGE=pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
MESSAGE=pci 0000:00:1f.5: BAR 0: assigned [mem 0x4fb04000-0x4fb04fff]
MESSAGE=pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
MESSAGE=pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
MESSAGE=pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
MESSAGE=pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
MESSAGE=pci_bus 0000:00: resource 8 [mem 0x4f800000-0xbfffffff window]
MESSAGE=pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
MESSAGE=pci_bus 0000:01: resource 1 [mem 0x4fa00000-0x4fafffff]
MESSAGE=pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
MESSAGE=pci_bus 0000:02: resource 1 [mem 0x4f900000-0x4f9fffff]
MESSAGE=pci_bus 0000:03: resource 1 [mem 0x4f800000-0x4f8fffff]
MESSAGE=PCI: CLS 64 bytes, default 64
MESSAGE=PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
MESSAGE=software IO TLB: mapped [mem 0x00000000317bf000-0x00000000357bf000] (64MB)
MESSAGE=Trying to unpack rootfs image as initramfs...
MESSAGE=clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
MESSAGE=clocksource: Switched to clocksource tsc
MESSAGE=platform rtc_cmos: registered platform RTC device (no PNP device found)
MESSAGE=Initialise system trusted keyrings
MESSAGE=Key type blacklist registered
MESSAGE=workingset: timestamp_bits=41 max_order=21 bucket_order=0
MESSAGE=zbud: loaded
MESSAGE=integrity: Platform Keyring initialized
MESSAGE=integrity: Machine keyring initialized
MESSAGE=Key type asymmetric registered
MESSAGE=Asymmetric key parser 'x509' registered
MESSAGE=Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
MESSAGE=io scheduler mq-deadline registered
MESSAGE=io scheduler kyber registered
MESSAGE=io scheduler bfq registered
MESSAGE=pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
MESSAGE=pcieport 0000:00:1d.0: PME: Signaling with IRQ 123
MESSAGE=pcieport 0000:00:1d.1: PME: Signaling with IRQ 124
MESSAGE=shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MESSAGE=Monitor-Mwait will be used to enter C-1 state
MESSAGE=Monitor-Mwait will be used to enter C-2 state
MESSAGE=Monitor-Mwait will be used to enter C-3 state
MESSAGE=ACPI: \_SB_.PR00: Found 3 idle states
MESSAGE=ACPI: AC: AC Adapter [ADP1] (on-line)
MESSAGE=input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
MESSAGE=ACPI: button: Lid Switch [LID0]
MESSAGE=input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
MESSAGE=ACPI: button: Power Button [PWRB]
MESSAGE=input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
MESSAGE=ACPI: button: Power Button [PWRF]
MESSAGE=ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
MESSAGE=ACPI Error: Aborting method \_TZ.FNCL due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
MESSAGE=ACPI Error: Aborting method \_TZ.FN03._ON due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
MESSAGE=ACPI Error: Aborting method \_TZ.FN04._ON due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
MESSAGE=thermal LNXTHERM:00: registered as thermal_zone0
MESSAGE=ACPI: thermal: Thermal Zone [TZ00] (46 C)
MESSAGE=Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
MESSAGE=hpet_acpi_add: no address or irqs in _CRS
MESSAGE=Non-volatile memory driver v1.3
MESSAGE=Linux agpgart interface v0.103
MESSAGE=AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
MESSAGE=ACPI: bus type drm_connector registered
MESSAGE=[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
MESSAGE=Console: switching to colour frame buffer device 240x67
MESSAGE=simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
MESSAGE=ahci 0000:00:17.0: version 3.0
MESSAGE=ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
MESSAGE=ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part deso sadm sds 
MESSAGE=scsi host0: ahci
MESSAGE=ata1: SATA max UDMA/133 abar m2048@0x4fb02000 port 0x4fb02100 irq 125
MESSAGE=usbcore: registered new interface driver usbserial_generic
MESSAGE=usbserial: USB Serial support registered for generic
MESSAGE=rtc_cmos rtc_cmos: RTC can wake from S4
MESSAGE=rtc_cmos rtc_cmos: registered as rtc0
MESSAGE=rtc_cmos rtc_cmos: setting system clock to 2023-10-17T03:23:11 UTC (1697512991)
MESSAGE=rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
MESSAGE=intel_pstate: Intel P-state driver initializing
MESSAGE=intel_pstate: HWP enabled
MESSAGE=ledtrig-cpu: registered to indicate activity on CPUs
MESSAGE=hid: raw HID events driver (C) Jiri Kosina
MESSAGE=intel_pmc_core INT33A1:00:  initialized
MESSAGE=drop_monitor: Initializing network drop monitor service
MESSAGE=Initializing XFRM netlink socket
MESSAGE=NET: Registered PF_INET6 protocol family
MESSAGE=Freeing initrd memory: 23172K
MESSAGE=Segment Routing with IPv6
MESSAGE=RPL Segment Routing with IPv6
MESSAGE=In-situ OAM (IOAM) with IPv6
MESSAGE=NET: Registered PF_PACKET protocol family
MESSAGE=microcode: Microcode Update Driver: v2.2.
MESSAGE=resctrl: L2 allocation detected
MESSAGE=IPI shorthand broadcast: enabled
MESSAGE=sched_clock: Marking stable (6728314166, 8335227)->(6787356116, -50706723)
MESSAGE=registered taskstats version 1
MESSAGE=Loading compiled-in X.509 certificates
MESSAGE=Loaded X.509 cert 'Build time autogenerated kernel key: 31c4ce631efedf5ae9428b0eec9291d28851bf25'
MESSAGE=zswap: loaded using pool zstd/zsmalloc
MESSAGE=Key type .fscrypt registered
MESSAGE=Key type fscrypt-provisioning registered
MESSAGE=integrity: Loading X.509 certificate: UEFI:db
MESSAGE=integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
MESSAGE=integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
MESSAGE=integrity: Loaded X.509 cert ': 3d5bb49f5d3b7b9741b5cf19e3a82ced'
MESSAGE=PM:   Magic number: 11:440:361
MESSAGE=msr msr0: hash matches
MESSAGE=RAS: Correctable Errors collector initialized.
MESSAGE=clk: Disabling unused clocks
MESSAGE=ACPI: battery: Slot [BAT1] (battery present)
MESSAGE=ata1: SATA link down (SStatus 4 SControl 300)
MESSAGE=Freeing unused decrypted memory: 2036K
MESSAGE=Freeing unused kernel image (initmem) memory: 3384K
MESSAGE=Write protecting the kernel read-only data: 30720k
MESSAGE=Freeing unused kernel image (rodata/data gap) memory: 1380K
MESSAGE=x86/mm: Checked W+X mappings: passed, no W+X pages found.
MESSAGE=rodata_test: all tests were successful
MESSAGE=Run /init as init process
MESSAGE=  with arguments:
MESSAGE=    /init
MESSAGE=  with environment:
MESSAGE=    HOME=/
MESSAGE=    TERM=linux
MESSAGE=    BOOT_IMAGE=/vmlinuz-linux
MESSAGE=systemd 254.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
MESSAGE=Detected architecture x86-64.
MESSAGE=Running in initrd.
MESSAGE=Initializing machine ID from random generator.
MESSAGE=Queued start job for default target Initrd Default Target.
MESSAGE=Reached target Path Units.
MESSAGE=Reached target Slice Units.
MESSAGE=Reached target Swaps.
MESSAGE=Reached target Timer Units.
MESSAGE=Listening on Journal Socket (/dev/log).
MESSAGE=Listening on Journal Socket.
MESSAGE=Listening on udev Control Socket.
MESSAGE=Listening on udev Kernel Socket.
MESSAGE=Reached target Socket Units.
MESSAGE=Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.5.7-arch1-1/modules.devname).
MESSAGE=Starting Check battery level during early boot...
MESSAGE=Starting Journal Service...
MESSAGE=Starting Load Kernel Modules...
MESSAGE=TPM2 PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
MESSAGE=Starting Create Static Device Nodes in /dev...
MESSAGE=Collecting audit messages is disabled.
MESSAGE=Starting Coldplug All udev Devices...
MESSAGE=Finished Check battery level during early boot.
MESSAGE=Finished Create Static Device Nodes in /dev.
MESSAGE=Reached target Preparation for Local File Systems.
MESSAGE=Reached target Local File Systems.
MESSAGE_ID=f77379a8490b408bbe5f6940505a777b
MESSAGE_ID
MESSAGE=Journal started
MESSAGE_ID=ec387f577b844b8fa948f33cad9a75e6
MESSAGE=Runtime Journal (/run/log/journal/f8e645dc179544cfabc623fd3436205e) is 8.0M, max 153.3M, 145.3M free.
MESSAGE=Starting Rule-based Manager for Device Events and Files...
MESSAGE=Started Journal Service.
MESSAGE=Using default interface naming scheme 'v253'.
CODE_FUNC=job_emit_done_message
MESSAGE=Started Rule-based Manager for Device Events and Files.
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE=Finished Coldplug All udev Devices.
CODE_FUNC=job_emit_start_message
MESSAGE=Starting Virtual Console Setup...
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE=Finished Virtual Console Setup.
MESSAGE=xhci_hcd 0000:00:0d.0: xHCI Host Controller
MESSAGE=xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
MESSAGE=i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
MESSAGE=i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
MESSAGE=xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
MESSAGE=xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
MESSAGE=serio: i8042 KBD port at 0x60,0x64 irq 1
MESSAGE=xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed
MESSAGE=usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
MESSAGE=usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
MESSAGE=usb usb1: Product: xHCI Host Controller
MESSAGE=usb usb1: Manufacturer: Linux 6.5.7-arch1-1 xhci-hcd
MESSAGE=usb usb1: SerialNumber: 0000:00:0d.0
MESSAGE=sdhci: Secure Digital Host Controller Interface driver
MESSAGE=sdhci: Copyright(c) Pierre Ossman
MESSAGE=Console: switching to colour dummy device 80x25
MESSAGE=hub 1-0:1.0: USB hub found
MESSAGE=hub 1-0:1.0: 1 port detected
MESSAGE=usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
MESSAGE=usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
MESSAGE=usb usb2: Product: xHCI Host Controller
MESSAGE=usb usb2: Manufacturer: Linux 6.5.7-arch1-1 xhci-hcd
MESSAGE=usb usb2: SerialNumber: 0000:00:0d.0
MESSAGE=hub 2-0:1.0: USB hub found
MESSAGE=hub 2-0:1.0: 4 ports detected
MESSAGE=xhci_hcd 0000:00:14.0: xHCI Host Controller
MESSAGE=xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
MESSAGE=xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
MESSAGE=xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
MESSAGE=xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
MESSAGE=usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
MESSAGE=usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
MESSAGE=usb usb3: Product: xHCI Host Controller
MESSAGE=usb usb3: Manufacturer: Linux 6.5.7-arch1-1 xhci-hcd
MESSAGE=usb usb3: SerialNumber: 0000:00:14.0
MESSAGE=hub 3-0:1.0: USB hub found
MESSAGE=hub 3-0:1.0: 12 ports detected
MESSAGE=usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
MESSAGE=usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
MESSAGE=usb usb4: Product: xHCI Host Controller
MESSAGE=usb usb4: Manufacturer: Linux 6.5.7-arch1-1 xhci-hcd
MESSAGE=usb usb4: SerialNumber: 0000:00:14.0
MESSAGE=hub 4-0:1.0: USB hub found
MESSAGE=hub 4-0:1.0: 4 ports detected
MESSAGE=nvme 0000:01:00.0: platform quirk: setting simple suspend
MESSAGE=nvme nvme0: pci function 0000:01:00.0
MESSAGE=sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8621] (rev 1)
MESSAGE=mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
MESSAGE=input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
MESSAGE=nvme nvme0: Shutdown timeout set to 8 seconds
MESSAGE=i915 0000:00:02.0: vgaarb: deactivate vga console
MESSAGE=i915 0000:00:02.0: [drm] Using Transparent Hugepages
MESSAGE=i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
MESSAGE=i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
MESSAGE=nvme nvme0: allocated 64 MiB host memory buffer.
MESSAGE=i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
MESSAGE=[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
MESSAGE=ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
MESSAGE=input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
MESSAGE=fbcon: i915drmfb (fb0) is primary device
MESSAGE_ID=7ad2d189f7e94e70a38c781354912448
MESSAGE=systemd-vconsole-setup.service: Deactivated successfully.
MESSAGE=Stopped Virtual Console Setup.
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
MESSAGE=nvme nvme0: 8/0/0 default/read/poll queues
MESSAGE= nvme0n1: p1 p2 p3 p4 p5 p6
MESSAGE=usb 3-2: new high-speed USB device number 2 using xhci_hcd
MESSAGE=usb 3-2: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
MESSAGE=usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
MESSAGE=usb 3-2: Product: Ultra Fit
MESSAGE=usb 3-2: Manufacturer: SanDisk
MESSAGE=usb 3-2: SerialNumber: 4C530001190318108265
MESSAGE=usb-storage 3-2:1.0: USB Mass Storage device detected
MESSAGE=scsi host1: usb-storage 3-2:1.0
MESSAGE=usbcore: registered new interface driver usb-storage
MESSAGE=usb 3-7: new high-speed USB device number 3 using xhci_hcd
MESSAGE=usb 3-7: New USB device found, idVendor=13d3, idProduct=5a24, bcdDevice=20.12
MESSAGE=usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
MESSAGE=usb 3-7: Product: VGA camera
MESSAGE=usb 3-7: Manufacturer: Azurewave
MESSAGE=usb 3-7: SerialNumber:  
MESSAGE=usb 3-10: new full-speed USB device number 4 using xhci_hcd
MESSAGE=usb 3-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
MESSAGE=usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
MESSAGE=Stopping Virtual Console Setup...
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE=i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
MESSAGE=Inserted module 'i915'
MESSAGE=Finished Load Kernel Modules.
MESSAGE=usbcore: registered new interface driver uas
MESSAGE=Reached target System Initialization.
MESSAGE=Reached target Basic System.
MESSAGE=scsi 1:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
MESSAGE=sd 1:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
MESSAGE=sd 1:0:0:0: [sda] Write Protect is off
MESSAGE=sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
MESSAGE=sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
MESSAGE= sda: sda1 sda2
MESSAGE=sd 1:0:0:0: [sda] Attached SCSI removable disk
MESSAGE=Found device Ultra_Fit 2.
MESSAGE=Reached target Initrd Root Device.
MESSAGE=Starting File System Check on /dev/disk/by-uuid/60c60104-132a-4195-b74b-07c2adb65cba...
MESSAGE=/dev/sda2: clean, 149297/1872304 files, 1681886/7482107 blocks
MESSAGE=Finished File System Check on /dev/disk/by-uuid/60c60104-132a-4195-b74b-07c2adb65cba.
MESSAGE=Mounting /sysroot...
MESSAGE=EXT4-fs (sda2): mounted filesystem 60c60104-132a-4195-b74b-07c2adb65cba r/w without journal. Quota mode: none.
MESSAGE=Mounted /sysroot.
MESSAGE=Reached target Initrd Root File System.
MESSAGE=Starting Mountpoints Configured in the Real Root...
MESSAGE=initrd-parse-etc.service: Deactivated successfully.
MESSAGE=Finished Mountpoints Configured in the Real Root.
MESSAGE=Reached target Initrd File Systems.
MESSAGE=Reached target Initrd Default Target.
MESSAGE=Starting Cleaning Up and Shutting Down Daemons...
MESSAGE=Stopped target Initrd Default Target.
MESSAGE=Stopped target Basic System.
MESSAGE=Stopped target Initrd Root Device.
MESSAGE=Stopped target Path Units.
MESSAGE=Stopped target Slice Units.
MESSAGE=Stopped target Socket Units.
MESSAGE=Stopped target System Initialization.
MESSAGE=Stopped target Local File Systems.
MESSAGE=Stopped target Preparation for Local File Systems.
MESSAGE=Stopped target Swaps.
MESSAGE=Stopped target Timer Units.
MESSAGE=systemd-battery-check.service: Deactivated successfully.
MESSAGE=Stopped Check battery level during early boot.
MESSAGE=systemd-modules-load.service: Deactivated successfully.
MESSAGE=Stopped Load Kernel Modules.
MESSAGE=systemd-udev-trigger.service: Deactivated successfully.
MESSAGE=Stopped Coldplug All udev Devices.
MESSAGE=Stopping Rule-based Manager for Device Events and Files...
MESSAGE=initrd-cleanup.service: Deactivated successfully.
MESSAGE=Finished Cleaning Up and Shutting Down Daemons.
MESSAGE=systemd-udevd.service: Deactivated successfully.
MESSAGE=Stopped Rule-based Manager for Device Events and Files.
MESSAGE=systemd-udevd-control.socket: Deactivated successfully.
MESSAGE=Closed udev Control Socket.
MESSAGE=systemd-udevd-kernel.socket: Deactivated successfully.
MESSAGE=Closed udev Kernel Socket.
MESSAGE=Starting Cleanup udev Database...
MESSAGE=systemd-tmpfiles-setup-dev.service: Deactivated successfully.
MESSAGE=Stopped Create Static Device Nodes in /dev.
MESSAGE=initrd-udevadm-cleanup-db.service: Deactivated successfully.
MESSAGE=Finished Cleanup udev Database.
MESSAGE=Reached target Switch Root.
MESSAGE=Starting Switch Root...
MESSAGE=Switching root.
MESSAGE_ID=d93fb3c9c24d451a97cea615ce59c00b
MESSAGE=Journal stopped

But both are related to the current boot, with getty.target.
Any ideas on that to do next?

Last edited by xenobro (2023-11-27 05:27:29)

solskog · 2023-10-17 03:43:36

If you have two computers, boot with getty.target

# systemctl enable sshd
# systemctl start sshd

reboot with multi-user.target and try ssh into it from another computer.

xenobro · 2023-10-17 04:00:00

I only have this computer, could my Android cellphone ssh into it?
And I'm not sure it'd work, since this computer doesn't log in the wireless network automatically, I have to manually connect it every time.
Unless I could tell it to do it automatically with an ethernet cable, but how would I make it run dhcpcd on boot?

Last edited by xenobro (2023-10-17 04:06:33)

xenobro · 2023-10-17 04:27:45

Ok, I found ConnectBot, an FOSS ssh client for Android, and I can connect my pc via ethernet cable to the modem. How do I make it connect to the network automatically on boot before it running sshd?

Last edited by xenobro (2023-10-17 04:42:50)

solskog · 2023-10-17 05:34:53

Typing commands from a sell phone is not recommended.
Why not backup your data and reinstall arch?

xenobro · 2023-10-17 05:44:56

I was avoiding that, because reconfiguring everything is a long process... And the fact that it seems so close to fully working again is pretty frustrating...
I could backup what's important and basically clone the backup pendrive.
But if the problem is just corrupt packages or something like that, wouldn't telling the system to redownload and reinstall everything work also?
If so, would pacman -Syyuu do that?
Or maybe

pacman -Sy $(pacman -Qeq) --noconfirm

?
Or

# pacman -Qqn | pacman -S -

as the wiki suggests, under 2.8. But should I use "--overwrite=*" then?

Last edited by xenobro (2023-10-17 05:54:59)

solskog · 2023-10-17 06:04:36

You have these broken packages, reinstall them.

audit: 208 total files, 1 missing file
confuse: 29 total files, 3 missing files
epdfview: 100 total files, 25 missing files
filesystem: 120 total files, 1 missing file

xenobro · 2023-10-17 06:24:31

Reinstalled those packages, same issues:
With getty.target, I have to log in as root and delete /run/nologin, otherwise I get this:

"System is booting up. Unprivileged users are not permitted to log in yet. Please come back later. For technical details, see pam_nologin(8)."
Login incorrect

And even after deleting /run/nologin, I can't startx because my folder doesn't exist, since it is created on the fly on RAM by a service that would run later.
With multi-user.target, I get the same errors and then the system hangs as usual.

Should I try to force reinstall everything? If so, which command do I use for it?

Last edited by xenobro (2023-10-17 06:25:46)

solskog · 2023-10-17 06:30:59

boot archlinux.iso image to repair packages like you did before.
and also check the health status of your pendrive

# smartclt -a /dev/sdX

Last edited by solskog (2023-10-17 06:35:20)

xenobro · 2023-10-17 06:39:37

Ok, but what command should I use to repair all packages once I'm arch-chrooted in archlinux.iso, after checking the health of the drive?

Last edited by xenobro (2023-10-17 06:40:37)

solskog · 2023-10-17 06:43:31

reinstall package

# pacman --verbose --sync PACKAGE

xenobro · 2023-10-17 06:47:16

Ok, thanks, but which packages should I reinstall? Only those you mentioned? All? And if all, what command should I issue for it?

solskog · 2023-10-17 07:02:43

reinstall explicit installed package with archlinux.iso before arch-chroot.

Collect explicit installed package inside arch-chroot.
# pacman -Qeq >/tmp/all
Back out from arch-chroot
# pacstrap /mnt/ $(</tmp/all)

Last edited by solskog (2023-10-17 07:03:29)

xenobro · 2023-10-17 07:09:25

Won't pacstrap erase my configs on /etc - or even everything on the drive?
Can't I just redownload and reinstall all packages without reinstalling the system from scratch?

Last edited by xenobro (2023-10-17 07:09:43)

seth · 2023-10-17 07:11:13

To re-install all packages but nb. that I haven't read the last couple of posts, so this might not work or solve the problem.

seth · 2023-10-17 07:16:00

Can you login as root and "systemctl start multi-user.target" from the getty target?

xenobro · 2023-10-17 07:47:14

solskog, I booted archlinux.iso, checked the health status of the pendrive, arch-chrooted into it, reinstalled audit, confuse and filesystems and removed epdfview.
The problems continue as always, and smartctl -a /dev/sdb gave me this:

/dev/sdb: Unknown USB Bridge [0x0781:0x5583 (0x100)]
Please specify device type with the -d option

seth, thank you very much! Going to multi-user.target from getty.target works perfectly:
If I boot into getty.target as root, rm /run/nologin, systemctl start multi-user.target, exit and log in as my user, everything works: pavucontrol, the service that creates my folder on RAM, etc.
But trying to boot into getty.target as my user first gives me the "unprivileged users" error above, and trying to boot into multi-user.target gives me those "ordering cycle" errors and freezes the system as usual.

How should I proceed? Reinstall all packages? Or should I post the /run/log/journal since I've manually started multi-user?

Last edited by xenobro (2023-10-17 07:49:04)

seth · 2023-10-17 07:52:41

But trying to boot into getty.target as my user first gives me the "unprivileged users" error above

That's normal, you'd simply log in as root and start the multi-user.target from there.
And yes, then please post the journal from the multi-user.target (wait a minute or so before starting it, so the gap is visible in the journal)

This is probably some race condition about the multi-user target relying on something that's not yet initialized…

xenobro · 2023-10-17 08:37:50

Here's the journal, it starts at 5:15AM, but multi-user.target starts at around 5:25AM:

out 17 05:15:38 archlinux systemd-journald[122]: Received SIGTERM from PID 1 (systemd).
out 17 05:15:38 archlinux systemd[1]: systemd 254.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
out 17 05:15:38 archlinux systemd[1]: Detected architecture x86-64.
out 17 05:15:38 archlinux systemd[1]: bpf-lsm: LSM BPF program attached
out 17 05:15:38 archlinux systemd[1]: /etc/systemd/system/systemd-vconsole-setup.service:21: Unknown key name 'WantedBy' in section 'Service', ignoring.
out 17 05:15:38 archlinux systemd[1]: initrd-switch-root.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
out 17 05:15:38 archlinux systemd[1]: Created slice Slice /system/getty.
out 17 05:15:38 archlinux systemd[1]: Created slice Slice /system/modprobe.
out 17 05:15:38 archlinux systemd[1]: Created slice Slice /system/systemd-fsck.
out 17 05:15:38 archlinux systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
out 17 05:15:38 archlinux systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
out 17 05:15:38 archlinux systemd[1]: Reached target Local Encrypted Volumes.
out 17 05:15:38 archlinux systemd[1]: Stopped target Switch Root.
out 17 05:15:38 archlinux systemd[1]: Reached target Local Integrity Protected Volumes.
out 17 05:15:38 archlinux systemd[1]: Reached target Local Verity Protected Volumes.
out 17 05:15:38 archlinux systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
out 17 05:15:38 archlinux systemd[1]: Listening on udev Control Socket.
out 17 05:15:38 archlinux systemd[1]: Listening on udev Kernel Socket.
out 17 05:15:38 archlinux systemd[1]: Mounting Huge Pages File System...
out 17 05:15:38 archlinux systemd[1]: Mounting POSIX Message Queue File System...
out 17 05:15:38 archlinux systemd[1]: Mounting Kernel Debug File System...
out 17 05:15:38 archlinux systemd[1]: Mounting Kernel Trace File System...
out 17 05:15:38 archlinux systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
out 17 05:15:38 archlinux systemd[1]: Mounting Temporary Directory /tmp...
out 17 05:15:38 archlinux systemd[1]: Starting Create List of Static Device Nodes...
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Module configfs...
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Module dm_mod...
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Module efi_pstore...
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Module fuse...
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Module loop...
out 17 05:15:38 archlinux systemd[1]: Starting Journal Service...
out 17 05:15:38 archlinux kernel: loop: module loaded
out 17 05:15:38 archlinux systemd-journald[256]: Collecting audit messages is disabled.
out 17 05:15:38 archlinux kernel: fuse: init (API version 7.38)
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Modules...
out 17 05:15:38 archlinux systemd-journald[256]: Journal started
out 17 05:15:38 archlinux systemd-journald[256]: Runtime Journal (/run/log/journal/b8b5a78bc3dd446893d7ca9110a51b1b) is 8.0M, max 153.3M, 145.3M free.
out 17 05:15:37 archlinux systemd[1]: systemd-journald.service: Deactivated successfully.
out 17 05:15:38 archlinux kernel: device-mapper: uevent: version 1.0.3
out 17 05:15:38 archlinux systemd[1]: Starting Generate network units from Kernel command line...
out 17 05:15:38 archlinux kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
out 17 05:15:38 archlinux systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
out 17 05:15:38 archlinux systemd[1]: Starting Remount Root and Kernel File Systems...
out 17 05:15:38 archlinux systemd[1]: Starting Coldplug All udev Devices...
out 17 05:15:38 archlinux systemd[1]: Started Journal Service.
out 17 05:15:38 archlinux systemd[1]: Mounted Huge Pages File System.
out 17 05:15:38 archlinux systemd[1]: Mounted POSIX Message Queue File System.
out 17 05:15:38 archlinux systemd[1]: Mounted Kernel Debug File System.
out 17 05:15:38 archlinux systemd[1]: Mounted Kernel Trace File System.
out 17 05:15:38 archlinux systemd[1]: Mounted Temporary Directory /tmp.
out 17 05:15:38 archlinux systemd-modules-load[257]: Inserted module 'crypto_user'
out 17 05:15:38 archlinux kernel: EXT4-fs (sda2): re-mounted 60c60104-132a-4195-b74b-07c2adb65cba r/w. Quota mode: none.
out 17 05:15:38 archlinux systemd[1]: Finished Create List of Static Device Nodes.
out 17 05:15:38 archlinux systemd[1]: modprobe@configfs.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Module configfs.
out 17 05:15:38 archlinux systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Module dm_mod.
out 17 05:15:38 archlinux systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Module efi_pstore.
out 17 05:15:38 archlinux systemd[1]: modprobe@fuse.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Module fuse.
out 17 05:15:38 archlinux systemd[1]: modprobe@loop.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Module loop.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Modules.
out 17 05:15:38 archlinux systemd[1]: Finished Generate network units from Kernel command line.
out 17 05:15:38 archlinux systemd[1]: Finished Remount Root and Kernel File Systems.
out 17 05:15:38 archlinux systemd[1]: Finished Coldplug All udev Devices.
out 17 05:15:38 archlinux systemd[1]: Reached target Preparation for Network.
out 17 05:15:38 archlinux systemd[1]: Mounting FUSE Control File System...
out 17 05:15:38 archlinux systemd[1]: Mounting Kernel Configuration File System...
out 17 05:15:38 archlinux systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
out 17 05:15:38 archlinux systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
out 17 05:15:38 archlinux systemd[1]: Starting Load/Save OS Random Seed...
out 17 05:15:38 archlinux systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
out 17 05:15:38 archlinux systemd[1]: Starting Apply Kernel Variables...
out 17 05:15:38 archlinux systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
out 17 05:15:38 archlinux systemd[1]: Mounted FUSE Control File System.
out 17 05:15:38 archlinux systemd[1]: Mounted Kernel Configuration File System.
out 17 05:15:38 archlinux systemd[1]: Finished Load/Save OS Random Seed.
out 17 05:15:38 archlinux systemd[1]: Finished Apply Kernel Variables.
out 17 05:15:38 archlinux systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
out 17 05:15:38 archlinux systemd[1]: Create System Users was skipped because no trigger condition checks were met.
out 17 05:15:38 archlinux systemd[1]: Starting Create Static Device Nodes in /dev...
out 17 05:15:38 archlinux systemd[1]: Finished Create Static Device Nodes in /dev.
out 17 05:15:38 archlinux systemd[1]: Reached target Preparation for Local File Systems.
out 17 05:15:38 archlinux systemd[1]: Mounting /home...
out 17 05:15:38 archlinux systemd[1]: Mounting /var/tmp...
out 17 05:15:38 archlinux systemd[1]: Starting Rule-based Manager for Device Events and Files...
out 17 05:15:38 archlinux systemd[1]: Mounted /home.
out 17 05:15:38 archlinux systemd[1]: Mounted /var/tmp.
out 17 05:15:38 archlinux systemd-udevd[297]: Using default interface naming scheme 'v253'.
out 17 05:15:38 archlinux systemd[1]: Started Rule-based Manager for Device Events and Files.
out 17 05:15:38 archlinux systemd[1]: Starting Load Kernel Module configfs...
out 17 05:15:38 archlinux systemd[1]: modprobe@configfs.service: Deactivated successfully.
out 17 05:15:38 archlinux systemd[1]: Finished Load Kernel Module configfs.
out 17 05:15:39 archlinux systemd[1]: Created slice Slice /system/systemd-backlight.
out 17 05:15:39 archlinux systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
out 17 05:15:39 archlinux kernel: EDAC igen6: v2.5.1
out 17 05:15:39 archlinux kernel: i801_smbus 0000:00:1f.4: SPD Write Disable is set
out 17 05:15:39 archlinux kernel: i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
out 17 05:15:39 archlinux kernel: i2c i2c-11: 1/2 memory slots populated (from DMI)
out 17 05:15:39 archlinux kernel: i2c i2c-11: Successfully instantiated SPD at 0x50
out 17 05:15:39 archlinux kernel: Consider using thermal netlink events interface
out 17 05:15:39 archlinux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
out 17 05:15:39 archlinux systemd[1]: Finished Load/Save Screen Backlight Brightness of backlight:intel_backlight.
out 17 05:15:39 archlinux systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
out 17 05:15:39 archlinux kernel: ee1004 11-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
out 17 05:15:39 archlinux kernel: iTCO_vendor_support: vendor-support=0
out 17 05:15:39 archlinux kernel: intel_rapl_msr: PL4 support detected.
out 17 05:15:39 archlinux kernel: intel_rapl_common: Found RAPL domain package
out 17 05:15:39 archlinux kernel: intel_rapl_common: Found RAPL domain core
out 17 05:15:39 archlinux kernel: intel_rapl_common: Found RAPL domain uncore
out 17 05:15:39 archlinux kernel: intel_rapl_common: Found RAPL domain psys
out 17 05:15:39 archlinux systemd[1]: Starting Setup Virtual Console...
out 17 05:15:39 archlinux kernel: resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
out 17 05:15:39 archlinux kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
out 17 05:15:39 archlinux kernel: caller __uncore_imc_init_box+0xfa/0x150 [intel_uncore] mapping multiple BARs
out 17 05:15:39 archlinux kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
out 17 05:15:39 archlinux kernel: Bluetooth: Core ver 2.22
out 17 05:15:39 archlinux kernel: spi-nor spi0.0: spi-nor-generic (16384 Kbytes)
out 17 05:15:39 archlinux kernel: NET: Registered PF_BLUETOOTH protocol family
out 17 05:15:39 archlinux kernel: Bluetooth: HCI device and connection manager initialized
out 17 05:15:39 archlinux kernel: Bluetooth: HCI socket layer initialized
out 17 05:15:39 archlinux kernel: Bluetooth: L2CAP socket layer initialized
out 17 05:15:39 archlinux kernel: Creating 1 MTD partitions on "0000:00:1f.5":
out 17 05:15:39 archlinux kernel: Bluetooth: SCO socket layer initialized
out 17 05:15:39 archlinux kernel: 0x000000000000-0x000001000000 : "BIOS"
out 17 05:15:39 archlinux kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
out 17 05:15:39 archlinux kernel: intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
out 17 05:15:39 archlinux kernel: idma64 idma64.0: Found Intel integrated DMA 64-bit
out 17 05:15:39 archlinux kernel: iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
out 17 05:15:39 archlinux kernel: iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
out 17 05:15:39 archlinux kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
out 17 05:15:39 archlinux kernel: cfg80211: failed to load regulatory.db
out 17 05:15:39 archlinux kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 98:83:89:fd:b9:f4, XID 541, IRQ 141
out 17 05:15:39 archlinux kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
out 17 05:15:39 archlinux kernel: Intel(R) Wireless WiFi driver for Linux
out 17 05:15:39 archlinux kernel: iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
out 17 05:15:39 archlinux kernel: iwlwifi 0000:00:14.3: Detected crf-id 0x2816, cnv-id 0x20000302 wfpm id 0x80000000
out 17 05:15:39 archlinux kernel: iwlwifi 0000:00:14.3: PCI dev a0f0/02a4, rev=0x351, rfid=0x108110
out 17 05:15:39 archlinux mtp-probe[342]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"
out 17 05:15:39 archlinux mtp-probe[341]: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7"
out 17 05:15:39 archlinux mtp-probe[341]: bus: 3, device: 3 was not an MTP device
out 17 05:15:39 archlinux mtp-probe[342]: bus: 3, device: 2 was not an MTP device
out 17 05:15:39 archlinux kernel: iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
out 17 05:15:39 archlinux kernel: input: PNP0C50:01 0911:5288 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input6
out 17 05:15:39 archlinux kernel: iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
out 17 05:15:39 archlinux kernel: input: PNP0C50:01 0911:5288 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input7
out 17 05:15:39 archlinux kernel: iwlwifi 0000:00:14.3: loaded firmware version 77.206b0184.0 QuZ-a0-jf-b0-77.ucode op_mode iwlmvm
out 17 05:15:39 archlinux kernel: input: PNP0C50:01 0911:5288 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input8
out 17 05:15:39 archlinux kernel: hid-generic 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [PNP0C50:01 0911:5288] on i2c-PNP0C50:01
out 17 05:15:39 archlinux kernel: proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
out 17 05:15:39 archlinux kernel: intel_rapl_common: Found RAPL domain package
out 17 05:15:39 archlinux kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
out 17 05:15:39 archlinux kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
out 17 05:15:39 archlinux kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
out 17 05:15:39 archlinux kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
out 17 05:15:39 archlinux kernel: RAPL PMU: hw unit of domain psys 2^-14 Joules
out 17 05:15:39 archlinux kernel: mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
out 17 05:15:39 archlinux kernel: cryptd: max_cpu_qlen set to 1000
out 17 05:15:39 archlinux kernel: r8169 0000:02:00.0 enp2s0: renamed from eth0
out 17 05:15:39 archlinux kernel: mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
out 17 05:15:39 archlinux kernel: mc: Linux media interface: v0.10
out 17 05:15:39 archlinux kernel: AVX2 version of gcm_enc/dec engaged.
out 17 05:15:39 archlinux kernel: AES CTR mode by8 optimization enabled
out 17 05:15:39 archlinux kernel: input: PNP0C50:01 0911:5288 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input9
out 17 05:15:39 archlinux kernel: input: PNP0C50:01 0911:5288 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input10
out 17 05:15:39 archlinux kernel: input: PNP0C50:01 0911:5288 UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-12/i2c-PNP0C50:01/0018:0911:5288.0001/input/input11
out 17 05:15:39 archlinux kernel: hid-multitouch 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [PNP0C50:01 0911:5288] on i2c-PNP0C50:01
out 17 05:15:39 archlinux kernel: mousedev: PS/2 mouse device common for all mice
out 17 05:15:40 archlinux kernel: videodev: Linux video capture interface: v2.00
out 17 05:15:40 archlinux kernel: snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
out 17 05:15:40 archlinux kernel: snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
out 17 05:15:40 archlinux kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
out 17 05:15:40 archlinux kernel: usbcore: registered new interface driver btusb
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Bootloader revision 0.0 build 0 week 30 2018
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Device revision is 2
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Secure boot is enabled
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: OTP lock is enabled
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: API lock is enabled
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Debug lock is disabled
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
out 17 05:15:40 archlinux systemd[1]: Starting Load/Save RF Kill Switch Status...
out 17 05:15:40 archlinux kernel: iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9462, REV=0x351
out 17 05:15:40 archlinux kernel: thermal thermal_zone5: failed to read out thermal zone (-61)
out 17 05:15:40 archlinux systemd[1]: Starting Load Kernel Module dm_mod...
out 17 05:15:40 archlinux systemd[1]: Starting Load Kernel Module efi_pstore...
out 17 05:15:40 archlinux systemd[1]: Starting Load Kernel Module loop...
out 17 05:15:40 archlinux systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
out 17 05:15:40 archlinux systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
out 17 05:15:40 archlinux systemd[1]: Create System Users was skipped because no trigger condition checks were met.
out 17 05:15:40 archlinux systemd[1]: Started Load/Save RF Kill Switch Status.
out 17 05:15:40 archlinux systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
out 17 05:15:40 archlinux kernel: usb 3-7: Found UVC 1.00 device VGA camera (13d3:5a24)
out 17 05:15:40 archlinux kernel: usbcore: registered new interface driver uvcvideo
out 17 05:15:40 archlinux systemd[1]: Finished Load Kernel Module dm_mod.
out 17 05:15:40 archlinux kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
out 17 05:15:40 archlinux kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
out 17 05:15:40 archlinux kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
out 17 05:15:40 archlinux kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
out 17 05:15:40 archlinux kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
out 17 05:15:40 archlinux kernel: snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
out 17 05:15:40 archlinux systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
out 17 05:15:40 archlinux systemd[1]: Finished Load Kernel Module efi_pstore.
out 17 05:15:40 archlinux systemd[1]: modprobe@loop.service: Deactivated successfully.
out 17 05:15:40 archlinux kernel: iwlwifi 0000:00:14.3: base HW address: 80:b6:55:b6:fb:0c
out 17 05:15:40 archlinux systemd[1]: Finished Load Kernel Module loop.
out 17 05:15:40 archlinux systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
out 17 05:15:40 archlinux systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Found device firmware: intel/ibt-19-0-0.sfi
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Boot Address: 0x24800
out 17 05:15:40 archlinux kernel: Bluetooth: hci0: Firmware Version: 206-22.23
out 17 05:15:40 archlinux kernel: input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
out 17 05:15:40 archlinux kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
out 17 05:15:40 archlinux kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
out 17 05:15:40 archlinux kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
out 17 05:15:40 archlinux kernel: input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
out 17 05:15:40 archlinux kernel: iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
out 17 05:15:40 archlinux systemd[1]: Condition check resulted in Ultra_Fit 1 being skipped.
out 17 05:15:40 archlinux systemd[1]: Starting File System Check on /dev/disk/by-uuid/4354-283A...
out 17 05:15:40 archlinux kernel: intel_tcc_cooling: TCC Offset locked
out 17 05:15:40 archlinux systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
out 17 05:15:40 archlinux systemd[1]: Finished Setup Virtual Console.
out 17 05:15:40 archlinux (udev-worker)[333]: controlC0: Process '/usr/bin/alsactl restore 0' failed with exit code 2.
out 17 05:15:40 archlinux systemd[1]: Starting Load Kernel Module dm_mod...
out 17 05:15:40 archlinux systemd[1]: Starting Load Kernel Module efi_pstore...
out 17 05:15:40 archlinux systemd[1]: Starting Load Kernel Module loop...
out 17 05:15:40 archlinux systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
out 17 05:15:40 archlinux systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
out 17 05:15:40 archlinux systemd[1]: Create System Users was skipped because no trigger condition checks were met.
out 17 05:15:40 archlinux systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
out 17 05:15:40 archlinux systemd[1]: Finished Load Kernel Module dm_mod.
out 17 05:15:40 archlinux systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
out 17 05:15:41 archlinux systemd[1]: Finished Load Kernel Module efi_pstore.
out 17 05:15:41 archlinux systemd[1]: modprobe@loop.service: Deactivated successfully.
out 17 05:15:41 archlinux systemd-fsck[402]: fsck.fat 4.2 (2021-01-31)
out 17 05:15:41 archlinux systemd-fsck[402]: /dev/sda1: 371 files, 183035/201616 clusters
out 17 05:15:41 archlinux systemd[1]: Finished Load Kernel Module loop.
out 17 05:15:41 archlinux systemd[1]: Finished File System Check on /dev/disk/by-uuid/4354-283A.
out 17 05:15:41 archlinux systemd[1]: Mounting /boot...
out 17 05:15:41 archlinux systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
out 17 05:15:41 archlinux systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
out 17 05:15:41 archlinux systemd[1]: Mounted /boot.
out 17 05:15:41 archlinux systemd[1]: Reached target Local File Systems.
out 17 05:15:41 archlinux systemd[1]: Rebuild Dynamic Linker Cache was skipped because no trigger condition checks were met.
out 17 05:15:41 archlinux systemd[1]: Set Up Additional Binary Formats was skipped because no trigger condition checks were met.
out 17 05:15:41 archlinux systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
out 17 05:15:41 archlinux systemd[1]: Starting Automatic Boot Loader Update...
out 17 05:15:41 archlinux systemd[1]: Starting Create Volatile Files and Directories...
out 17 05:15:41 archlinux systemd[1]: Finished Automatic Boot Loader Update.
out 17 05:15:41 archlinux systemd[1]: Finished Create Volatile Files and Directories.
out 17 05:15:41 archlinux systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
out 17 05:15:41 archlinux systemd[1]: First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
out 17 05:15:41 archlinux systemd[1]: Rebuild Journal Catalog was skipped because of an unmet condition check (ConditionNeedsUpdate=/var).
out 17 05:15:41 archlinux systemd[1]: Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
out 17 05:15:41 archlinux systemd[1]: Starting Network Name Resolution...
out 17 05:15:41 archlinux systemd[1]: Starting Network Time Synchronization...
out 17 05:15:41 archlinux systemd[1]: Update is Completed was skipped because no trigger condition checks were met.
out 17 05:15:41 archlinux systemd[1]: Starting Record System Boot/Shutdown in UTMP...
out 17 05:15:41 archlinux systemd[1]: Finished Record System Boot/Shutdown in UTMP.
out 17 05:15:41 archlinux systemd[1]: Started Network Time Synchronization.
out 17 05:15:41 archlinux systemd[1]: Reached target System Time Set.
out 17 05:15:41 archlinux systemd-resolved[425]: Positive Trust Anchors:
out 17 05:15:41 archlinux systemd-resolved[425]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
out 17 05:15:41 archlinux systemd-resolved[425]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa corp home internal intranet lan local private test
out 17 05:15:41 archlinux systemd-resolved[425]: Using system hostname 'archlinux'.
out 17 05:15:41 archlinux systemd[1]: Started Network Name Resolution.
out 17 05:15:41 archlinux systemd[1]: Reached target Host and Network Name Lookups.
out 17 05:15:41 archlinux systemd[1]: Reached target System Initialization.
out 17 05:15:41 archlinux systemd[1]: Listening on D-Bus System Message Bus Socket.
out 17 05:15:41 archlinux systemd[1]: Starting Save/Restore Sound Card State...
out 17 05:15:41 archlinux systemd[1]: Manage Sound Card State (restore and store) was skipped because of an unmet condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
out 17 05:15:41 archlinux systemd[1]: Starting Bluetooth service...
out 17 05:15:41 archlinux (uetoothd)[433]: bluetooth.service: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
out 17 05:15:41 archlinux systemd[1]: Started Getty on tty1.
out 17 05:15:41 archlinux systemd[1]: Reached target Login Prompts.
out 17 05:15:41 archlinux systemd[1]: TPM2 PCR Barrier (Initialization) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
out 17 05:15:41 archlinux systemd[1]: TPM2 PCR Barrier (User) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
out 17 05:15:41 archlinux systemd[1]: Starting D-Bus System Message Bus...
out 17 05:15:41 archlinux systemd[1]: Finished Save/Restore Sound Card State.
out 17 05:15:41 archlinux systemd[1]: Reached target Sound Card.
out 17 05:15:41 archlinux bluetoothd[433]: Bluetooth daemon 5.70
out 17 05:15:42 archlinux systemd[1]: Started D-Bus System Message Bus.
out 17 05:15:42 archlinux systemd[1]: Started Bluetooth service.
out 17 05:15:42 archlinux systemd[1]: Reached target Bluetooth Support.
out 17 05:15:42 archlinux systemd[1]: Startup finished in 4.770s (firmware) + 5.040s (loader) + 12.537s (kernel) + 4.289s (initrd) + 5.904s (userspace) = 32.541s.
out 17 05:15:42 archlinux bluetoothd[433]: Starting SDP server
out 17 05:15:42 archlinux bluetoothd[433]: src/plugin.c:plugin_init() System does not support csip plugin
out 17 05:15:42 archlinux bluetoothd[433]: profiles/audio/micp.c:micp_init() D-Bus experimental not enabled
out 17 05:15:42 archlinux bluetoothd[433]: src/plugin.c:plugin_init() System does not support micp plugin
out 17 05:15:42 archlinux bluetoothd[433]: src/plugin.c:plugin_init() System does not support vcp plugin
out 17 05:15:42 archlinux bluetoothd[433]: src/plugin.c:plugin_init() System does not support mcp plugin
out 17 05:15:42 archlinux bluetoothd[433]: src/plugin.c:plugin_init() System does not support bass plugin
out 17 05:15:42 archlinux bluetoothd[433]: src/plugin.c:plugin_init() System does not support bap plugin
out 17 05:15:42 archlinux dbus-daemon[435]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1' (uid=0 pid=433 comm="/usr/lib/bluetooth/bluetoothd")
out 17 05:15:42 archlinux kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
out 17 05:15:42 archlinux kernel: Bluetooth: BNEP filters: protocol multicast
out 17 05:15:42 archlinux kernel: Bluetooth: BNEP socket layer initialized
out 17 05:15:42 archlinux bluetoothd[433]: Bluetooth management interface 1.22 initialized
out 17 05:15:42 archlinux systemd[1]: Starting Hostname Service...
out 17 05:15:42 archlinux dbus-daemon[435]: [system] Successfully activated service 'org.freedesktop.hostname1'
out 17 05:15:42 archlinux systemd[1]: Started Hostname Service.
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Waiting for firmware download to complete
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Firmware loaded in 1662731 usecs
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Waiting for device to boot
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Device booted in 15021 usecs
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Malformed MSFT vendor event: 0x02
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-0.ddc
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: Firmware revision 0.0 build 206 week 22 2023
out 17 05:15:42 archlinux kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
out 17 05:15:42 archlinux kernel: Bluetooth: MGMT ver 1.22
out 17 05:15:42 archlinux kernel: NET: Registered PF_ALG protocol family
out 17 05:15:42 archlinux kernel: ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
out 17 05:15:43 archlinux kernel: ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-95)
out 17 05:15:45 archlinux systemd[1]: systemd-rfkill.service: Deactivated successfully.
out 17 05:16:01 archlinux login[434]: pam_unix(login:session): session opened for user root(uid=0) by root(uid=0)
out 17 05:16:01 archlinux dbus-daemon[435]: [system] Activating via systemd: service name='org.freedesktop.login1' unit='dbus-org.freedesktop.login1.service' requested by ':1.6' (uid=0 pid=434 comm="/bin/login -p --     ")
out 17 05:16:01 archlinux systemd[1]: Created slice User and Session Slice.
out 17 05:16:01 archlinux systemd[1]: Starting Load Kernel Module drm...
out 17 05:16:01 archlinux systemd[1]: modprobe@drm.service: Deactivated successfully.
out 17 05:16:01 archlinux systemd[1]: Finished Load Kernel Module drm.
out 17 05:16:01 archlinux systemd[1]: Starting User Login Management...
out 17 05:16:01 archlinux systemd-logind[462]: New seat seat0.
out 17 05:16:01 archlinux systemd-logind[462]: Watching system buttons on /dev/input/event2 (Power Button)
out 17 05:16:01 archlinux systemd-logind[462]: Watching system buttons on /dev/input/event1 (Power Button)
out 17 05:16:01 archlinux systemd-logind[462]: Watching system buttons on /dev/input/event0 (Lid Switch)
out 17 05:16:01 archlinux systemd-logind[462]: Watching system buttons on /dev/input/event4 (AT Translated Set 2 keyboard)
out 17 05:16:01 archlinux systemd[1]: Started User Login Management.
out 17 05:16:01 archlinux dbus-daemon[435]: [system] Successfully activated service 'org.freedesktop.login1'
out 17 05:16:01 archlinux systemd-logind[462]: New session 1 of user root.
out 17 05:16:01 archlinux systemd[1]: Created slice User Slice of UID 0.
out 17 05:16:01 archlinux systemd[1]: Starting User Runtime Directory /run/user/0...
out 17 05:16:02 archlinux systemd[1]: Finished User Runtime Directory /run/user/0.
out 17 05:16:02 archlinux systemd[1]: Starting User Manager for UID 0...
out 17 05:16:02 archlinux (systemd)[481]: pam_nologin(systemd-user:account): conversation failed
out 17 05:16:02 archlinux (systemd)[481]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[root] ruser=[<unknown>] rhost=[<unknown>]
out 17 05:16:02 archlinux (systemd)[481]: pam_unix(systemd-user:session): session opened for user root(uid=0) by root(uid=0)
out 17 05:16:02 archlinux systemd[481]: Queued start job for default target Main User Target.
out 17 05:16:02 archlinux systemd[481]: Created slice User Application Slice.
out 17 05:16:02 archlinux systemd[481]: Reached target Paths.
out 17 05:16:02 archlinux systemd[481]: Reached target Timers.
out 17 05:16:02 archlinux systemd[481]: Starting D-Bus User Message Bus Socket...
out 17 05:16:02 archlinux systemd[481]: Listening on GnuPG network certificate management daemon.
out 17 05:16:02 archlinux systemd[481]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
out 17 05:16:02 archlinux systemd[481]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
out 17 05:16:02 archlinux systemd[481]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
out 17 05:16:02 archlinux systemd[481]: Listening on GnuPG cryptographic agent and passphrase cache.
out 17 05:16:02 archlinux systemd[481]: Listening on p11-kit server.
out 17 05:16:02 archlinux systemd[481]: Listening on PipeWire Multimedia System Socket.
out 17 05:16:02 archlinux systemd[481]: Sound System was skipped because of an unmet condition check (ConditionUser=!root).
out 17 05:16:02 archlinux systemd[481]: Listening on D-Bus User Message Bus Socket.
out 17 05:16:02 archlinux systemd[481]: Reached target Sockets.
out 17 05:16:02 archlinux systemd[481]: Reached target Basic System.
out 17 05:16:02 archlinux systemd[481]: Reached target Main User Target.
out 17 05:16:02 archlinux systemd[481]: Startup finished in 220ms.
out 17 05:16:02 archlinux systemd[1]: Started User Manager for UID 0.
out 17 05:16:02 archlinux systemd[1]: Started Session 1 of User root.
out 17 05:16:02 archlinux login[434]: ROOT LOGIN ON tty1
out 17 05:16:12 archlinux systemd[1]: systemd-hostnamed.service: Deactivated successfully.
out 17 05:25:25 archlinux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
out 17 05:25:25 archlinux systemd[1]: Started Refresh existing PGP keys of archlinux-keyring regularly.
out 17 05:25:25 archlinux systemd[1]: Started Daily rotation of log files.
out 17 05:25:25 archlinux systemd[1]: Started Daily man-db regeneration.
out 17 05:25:25 archlinux systemd[1]: Started Daily verification of password and group files.
out 17 05:25:25 archlinux systemd[1]: Started Daily Cleanup of Temporary Directories.
out 17 05:25:25 archlinux systemd[1]: Reached target Path Units.
out 17 05:25:25 archlinux systemd[1]: Reached target Remote Encrypted Volumes.
out 17 05:25:25 archlinux systemd[1]: Reached target Remote File Systems.
out 17 05:25:25 archlinux systemd[1]: Reached target Slice Units.
out 17 05:25:25 archlinux systemd[1]: Reached target Timer Units.
out 17 05:25:25 archlinux systemd[1]: Listening on Device-mapper event daemon FIFOs.
out 17 05:25:25 archlinux systemd[1]: Listening on Process Core Dump Socket.
out 17 05:25:25 archlinux systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
out 17 05:25:25 archlinux systemd[1]: Listening on Network Service Netlink Socket.
out 17 05:25:25 archlinux systemd[1]: Listening on User Database Manager Socket.
out 17 05:25:25 archlinux systemd[1]: Reached target Socket Units.
out 17 05:25:25 archlinux systemd[1]: Reached target Basic System.
out 17 05:25:25 archlinux systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
out 17 05:25:25 archlinux systemd[1]: Reached target Containers.
out 17 05:25:25 archlinux systemd[1]: Starting Populate /home...
out 17 05:25:25 archlinux systemd[1]: Starting Initialize hardware monitoring sensors...
out 17 05:25:25 archlinux (modprobe)[628]: lm_sensors.service: Referenced but unset environment variable evaluates to an empty string: BUS_MODULES
out 17 05:25:25 archlinux systemd[1]: Starting Home Area Manager...
out 17 05:25:25 archlinux systemd[1]: Starting Network Configuration...
out 17 05:25:25 archlinux systemd[1]: Starting User Database Manager...
out 17 05:25:25 archlinux systemd[1]: Started User Database Manager.
out 17 05:25:25 archlinux systemd-homed[629]: Watching /home.
out 17 05:25:25 archlinux systemd[1]: Started Home Area Manager.
out 17 05:25:25 archlinux systemd[1]: Finished Home Area Activation.
out 17 05:25:25 archlinux systemd[1]: Finished Initialize hardware monitoring sensors.
out 17 05:25:25 archlinux kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
out 17 05:25:25 archlinux kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
out 17 05:25:25 archlinux systemd-networkd[630]: lo: Link UP
out 17 05:25:25 archlinux systemd-networkd[630]: lo: Gained carrier
out 17 05:25:25 archlinux systemd-networkd[630]: wg0: netdev ready
out 17 05:25:25 archlinux systemd-networkd[630]: Enumeration completed
out 17 05:25:25 archlinux systemd-networkd[630]: wg0: Configuring with /etc/systemd/network/wg0.network.
out 17 05:25:25 archlinux systemd[1]: Started Network Configuration.
out 17 05:25:25 archlinux systemd[1]: Reached target Network.
out 17 05:25:25 archlinux systemd[1]: Starting Permit User Sessions...
out 17 05:25:25 archlinux systemd[1]: Finished Populate /home.
out 17 05:25:25 archlinux systemd[1]: Finished Permit User Sessions.
out 17 05:25:25 archlinux systemd[1]: Reached target Multi-User System.
out 17 05:25:30 archlinux login[434]: pam_unix(login:session): session closed for user root
out 17 05:25:30 archlinux systemd[1]: getty@tty1.service: Deactivated successfully.
out 17 05:25:30 archlinux systemd[1]: session-1.scope: Deactivated successfully.
out 17 05:25:30 archlinux systemd-logind[462]: Session 1 logged out. Waiting for processes to exit.
out 17 05:25:30 archlinux systemd[1]: getty@tty1.service: Scheduled restart job, restart counter is at 1.
out 17 05:25:30 archlinux systemd[1]: Started Getty on tty1.
out 17 05:25:30 archlinux systemd-logind[462]: Removed session 1.
out 17 05:25:32 archlinux login[655]: pam_unix(login:auth): user [x] has blank password; authenticated without it
out 17 05:25:32 archlinux login[655]: pam_unix(login:session): session opened for user x(uid=1000) by x(uid=0)
out 17 05:25:32 archlinux systemd[1]: Created slice User Slice of UID 1000.
out 17 05:25:32 archlinux systemd[1]: Starting User Runtime Directory /run/user/1000...
out 17 05:25:32 archlinux systemd-logind[462]: New session 3 of user x.
out 17 05:25:32 archlinux systemd[1]: Finished User Runtime Directory /run/user/1000.
out 17 05:25:32 archlinux systemd[1]: Starting User Manager for UID 1000...
out 17 05:25:32 archlinux (systemd)[664]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[x] ruser=[<unknown>] rhost=[<unknown>]
out 17 05:25:32 archlinux (systemd)[664]: pam_unix(systemd-user:session): session opened for user x(uid=1000) by x(uid=0)
out 17 05:25:32 archlinux systemd[664]: Queued start job for default target Main User Target.
out 17 05:25:33 archlinux systemd[664]: Created slice User Application Slice.
out 17 05:25:33 archlinux systemd[664]: Reached target Paths.
out 17 05:25:33 archlinux systemd[664]: Reached target Timers.
out 17 05:25:33 archlinux systemd[664]: Starting D-Bus User Message Bus Socket...
out 17 05:25:33 archlinux systemd[664]: Listening on GnuPG network certificate management daemon.
out 17 05:25:33 archlinux systemd[664]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
out 17 05:25:33 archlinux systemd[664]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
out 17 05:25:33 archlinux systemd[664]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
out 17 05:25:33 archlinux systemd[664]: Listening on GnuPG cryptographic agent and passphrase cache.
out 17 05:25:33 archlinux systemd[664]: Listening on p11-kit server.
out 17 05:25:33 archlinux systemd[664]: Listening on PipeWire Multimedia System Socket.
out 17 05:25:33 archlinux systemd[664]: Listening on Sound System.
out 17 05:25:33 archlinux systemd[664]: Listening on D-Bus User Message Bus Socket.
out 17 05:25:33 archlinux systemd[664]: Reached target Sockets.
out 17 05:25:33 archlinux systemd[664]: Reached target Basic System.
out 17 05:25:33 archlinux systemd[664]: Reached target Main User Target.
out 17 05:25:33 archlinux systemd[664]: Startup finished in 106ms.
out 17 05:25:33 archlinux systemd[1]: Started User Manager for UID 1000.
out 17 05:25:33 archlinux systemd[1]: Started Session 3 of User x.
out 17 05:25:33 archlinux login[655]: LOGIN ON tty1 BY x
out 17 05:25:40 archlinux systemd[1]: Stopping User Manager for UID 0...
out 17 05:25:40 archlinux systemd[481]: Activating special unit Exit the Session...
out 17 05:25:40 archlinux systemd[481]: Stopped target Main User Target.
out 17 05:25:40 archlinux systemd[481]: Stopped target Basic System.
out 17 05:25:40 archlinux systemd[481]: Stopped target Paths.
out 17 05:25:40 archlinux systemd[481]: Stopped target Sockets.
out 17 05:25:40 archlinux systemd[481]: Stopped target Timers.
out 17 05:25:40 archlinux systemd[481]: Closed D-Bus User Message Bus Socket.
out 17 05:25:40 archlinux systemd[481]: Closed GnuPG network certificate management daemon.
out 17 05:25:40 archlinux systemd[481]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).
out 17 05:25:40 archlinux systemd[481]: Closed GnuPG cryptographic agent and passphrase cache (restricted).
out 17 05:25:40 archlinux systemd[481]: Closed GnuPG cryptographic agent (ssh-agent emulation).
out 17 05:25:40 archlinux systemd[481]: Closed GnuPG cryptographic agent and passphrase cache.
out 17 05:25:40 archlinux systemd[481]: Closed p11-kit server.
out 17 05:25:40 archlinux systemd[481]: Closed PipeWire Multimedia System Socket.
out 17 05:25:40 archlinux systemd[481]: Removed slice User Application Slice.
out 17 05:25:40 archlinux systemd[481]: Reached target Shutdown.
out 17 05:25:40 archlinux systemd[481]: Finished Exit the Session.
out 17 05:25:40 archlinux systemd[481]: Reached target Exit the Session.
out 17 05:25:40 archlinux (sd-pam)[485]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8004 service=[systemd-user] terminal=[] user=[root] ruser=[<unknown>] rhost=[<unknown>]
out 17 05:25:40 archlinux systemd[1]: user@0.service: Deactivated successfully.
out 17 05:25:40 archlinux systemd[1]: Stopped User Manager for UID 0.
out 17 05:25:40 archlinux systemd[1]: Stopping User Runtime Directory /run/user/0...
out 17 05:25:40 archlinux systemd[1]: run-user-0.mount: Deactivated successfully.
out 17 05:25:40 archlinux systemd[1]: user-runtime-dir@0.service: Deactivated successfully.
out 17 05:25:40 archlinux systemd[1]: Stopped User Runtime Directory /run/user/0.
out 17 05:25:40 archlinux systemd[1]: Removed slice User Slice of UID 0.

seth wrote:

That's normal

That's the thing, it wasn't: until this started to happen, I had never had these issues before, nor the "unprivileged users" error nor having to boot into getty.target and then manually go to multi, and now it happens literally at every single boot.
Of course, it's much better that I've finally can access my system, but I'd like to go back to what it was before.
And possibly find out what happened, so I can update the system again, the backup, etc. without risking this happening again.

But anyway, what should I do now? How should I proceed?
Once again, thank you very much,

solskog · 2023-10-17 09:06:56

# systemd-analyze critical-chain
# systemd-analyze blame
# systemd-analyze plot > /tmp/fig.svg

Last edited by solskog (2023-10-17 09:21:18)

xenobro · 2023-10-17 11:13:55

solskog, here's the information you asked for:

# systemd-analyze critical-chain multi-user.target

The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.

multi-user.target @9min 49.446s
└─dbus.service @5.627s +271ms
  └─dbus.socket @5.599s
    └─sysinit.target @5.599s
      └─systemd-resolved.service @5.250s +346ms
        └─systemd-tmpfiles-setup.service @5.052s +157ms
          └─local-fs.target @5.045s
            └─boot.mount @5.017s +26ms
              └─systemd-fsck@dev-disk-by\x2duuid-4354\x2d283A.service @4.447s +503ms
                └─dev-disk-by\x2duuid-4354\x2d283A.device @584542y 2w 2d 20h 1min 48.199s +5.778s

I had to put multi-user.target as an argument for this command.

I think the other two only reached getty.target, not multi-user.target:

# systemd-analyze blame

2min 225ms systemd-networkd-wait-online.service
    6.862s dev-ttyS1.device
    6.862s sys-devices-platform-serial8250-tty-ttyS1.device
    6.862s dev-ttyS0.device
    6.862s sys-devices-platform-serial8250-tty-ttyS0.device
    6.861s sys-devices-platform-serial8250-tty-ttyS10.device
    6.861s dev-ttyS10.device
    6.860s sys-devices-platform-serial8250-tty-ttyS11.device
    6.860s dev-ttyS11.device
    6.860s dev-ttyS12.device
    6.860s sys-devices-platform-serial8250-tty-ttyS12.device
    6.859s sys-devices-platform-serial8250-tty-ttyS14.device
    6.859s dev-ttyS14.device
    6.859s dev-ttyS13.device
    6.859s sys-devices-platform-serial8250-tty-ttyS13.device
    6.858s sys-devices-platform-serial8250-tty-ttyS15.device
    6.858s dev-ttyS15.device
    6.858s sys-devices-platform-serial8250-tty-ttyS16.device
    6.858s dev-ttyS16.device
    6.857s dev-ttyS17.device
    6.857s sys-devices-platform-serial8250-tty-ttyS17.device
    6.857s dev-ttyS19.device
    6.857s sys-devices-platform-serial8250-tty-ttyS19.device
    6.856s dev-ttyS21.device
    6.856s sys-devices-platform-serial8250-tty-ttyS21.device
    6.856s sys-devices-platform-serial8250-tty-ttyS27.device
    6.856s dev-ttyS27.device
    6.855s sys-devices-platform-serial8250-tty-ttyS29.device
    6.855s dev-ttyS29.device
    6.855s sys-devices-platform-serial8250-tty-ttyS18.device
    6.855s dev-ttyS18.device
    6.847s dev-ttyS25.device
    6.847s sys-devices-platform-serial8250-tty-ttyS25.device
    6.847s sys-devices-platform-serial8250-tty-ttyS3.device
    6.847s dev-ttyS3.device
    6.846s dev-ttyS22.device
    6.846s sys-devices-platform-serial8250-tty-ttyS22.device
    6.845s dev-ttyS28.device
    6.845s sys-devices-platform-serial8250-tty-ttyS28.device
    6.845s sys-devices-platform-serial8250-tty-ttyS23.device
    6.845s dev-ttyS23.device
    6.842s dev-ttyS26.device
    6.842s sys-devices-platform-serial8250-tty-ttyS26.device
    6.841s sys-devices-platform-serial8250-tty-ttyS2.device
    6.841s dev-ttyS2.device
    6.841s sys-devices-platform-serial8250-tty-ttyS20.device
    6.841s dev-ttyS20.device
    6.840s sys-devices-platform-serial8250-tty-ttyS31.device
    6.840s dev-ttyS31.device
    6.840s sys-devices-platform-serial8250-tty-ttyS5.device
    6.840s dev-ttyS5.device
    6.839s sys-devices-platform-serial8250-tty-ttyS6.device
    6.839s dev-ttyS6.device
    6.839s dev-ttyS7.device
    6.839s sys-devices-platform-serial8250-tty-ttyS7.device
    6.839s sys-devices-platform-serial8250-tty-ttyS8.device
    6.839s dev-ttyS8.device
    6.838s sys-devices-platform-serial8250-tty-ttyS4.device
    6.838s dev-ttyS4.device
    6.838s sys-devices-platform-serial8250-tty-ttyS30.device
    6.838s dev-ttyS30.device
    6.837s sys-devices-platform-serial8250-tty-ttyS9.device
    6.837s dev-ttyS9.device
    6.837s sys-devices-platform-serial8250-tty-ttyS24.device
    6.837s dev-ttyS24.device
    6.798s sys-module-configfs.device
    5.779s dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusbv2\x2d0:2:1.0\x2dscsi\x2d0:0:0:0\x2dpart1.device
    5.779s dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:2:1.0\x2dscsi\x2d0:0:0:0\x2dpart1.device
    5.779s sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d2-3\x2d2:1.0-host1-target1:0:0-1:0:0:0-block-sda-sda1.device
    5.779s dev-disk-by\x2ddiskseq-2\x2dpart1.device
    5.779s dev-disk-by\x2dpartuuid-161c48d5\x2d7399\x2dc544\x2db85e\x2de81c6f07b737.device
    5.779s dev-sda1.device
    5.779s dev-disk-by\x2did-usb\x2dSanDisk_Ultra_Fit_4C530001190318108265\x2d0:0\x2dpart1.device
    5.778s dev-disk-by\x2duuid-4354\x2d283A.device
    5.719s dev-disk-by\x2dpartuuid-8a3e2e96\x2d8715\x2d4e43\x2d4173\x2d636c65706975.device
    5.719s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1\x2dpart6.device
    5.719s dev-nvme0n1p6.device
    5.719s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1\x2dpart6.device
    5.719s dev-disk-by\x2duuid-98AE\x2d2342.device
    5.719s dev-disk-by\x2ddiskseq-1\x2dpart6.device
    5.719s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001\x2dpart6.device
    5.719s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1-nvme0n1p6.device
    5.719s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940\x2dpart6.device
    5.719s dev-disk-by\x2dlabel-SAMSUNG_REC.device
    5.717s dev-disk-by\x2duuid-60c60104\x2d132a\x2d4195\x2db74b\x2d07c2adb65cba.device
    5.717s dev-disk-by\x2dpartuuid-ab416874\x2dcd59\x2d8b4e\x2db94b\x2d721bb5bf1320.device
    5.717s dev-sda2.device
    5.717s sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d2-3\x2d2:1.0-host1-target1:0:0-1:0:0:0-block-sda-sda2.device
    5.717s dev-disk-by\x2ddiskseq-2\x2dpart2.device
    5.717s dev-disk-by\x2did-usb\x2dSanDisk_Ultra_Fit_4C530001190318108265\x2d0:0\x2dpart2.device
    5.717s dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusbv2\x2d0:2:1.0\x2dscsi\x2d0:0:0:0\x2dpart2.device
    5.717s dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:2:1.0\x2dscsi\x2d0:0:0:0\x2dpart2.device
    5.715s dev-disk-by\x2dpartuuid-018fd1e9\x2d7655\x2d422d\x2d93aa\x2d15a76e5c9ce0.device
    5.715s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1\x2dpart5.device
    5.715s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1\x2dpart5.device
    5.715s dev-disk-by\x2ddiskseq-1\x2dpart5.device
    5.715s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940\x2dpart5.device
    5.715s dev-disk-by\x2dpartlabel-\xe6\x95\x92\xe6\xbd\xa3\xe6\x95\xb6\xe7\xa5\xb2\xe4\x90\xa0\xe7\x91\xa1a.device
    5.715s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001\x2dpart5.device
    5.715s dev-disk-by\x2dlabel-SAMSUNG_REC2.device
    5.715s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1-nvme0n1p5.device
    5.715s dev-disk-by\x2duuid-02CAE7FBCAE7E8BD.device
    5.715s dev-nvme0n1p5.device
    5.710s dev-disk-by\x2dpartuuid-5b486734\x2d85d5\x2d410b\x2db609\x2d900920396004.device
    5.710s dev-nvme0n1p4.device
    5.710s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1-nvme0n1p4.device
    5.710s dev-disk-by\x2ddiskseq-1\x2dpart4.device
    5.710s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001\x2dpart4.device
    5.710s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940\x2dpart4.device
    5.710s dev-disk-by\x2dlabel-Windows\x5cx20RE\x5cx20tools.device
    5.710s dev-disk-by\x2dpartlabel-\xe6\xa5\x97\xe6\x91\xae\xe7\x9d\xaf\xe2\x81\xb3\xe4\x95\x92.device
    5.710s dev-disk-by\x2duuid-F0A40CB6A40C80F8.device
    5.710s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1\x2dpart4.device
    5.710s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1\x2dpart4.device
    5.709s dev-disk-by\x2dpartlabel-Basic\x5cx20data\x5cx20partition.device
    5.705s dev-nvme0n1p3.device
    5.705s dev-disk-by\x2duuid-84C6A3ABC6A39BC4.device
    5.705s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1-nvme0n1p3.device
    5.705s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940\x2dpart3.device
    5.705s dev-disk-by\x2dpartuuid-8e93caa7\x2df8bf\x2d4974\x2d97fa\x2d1b961c4459d0.device
    5.705s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1\x2dpart3.device
    5.705s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001\x2dpart3.device
    5.705s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1\x2dpart3.device
    5.705s dev-disk-by\x2ddiskseq-1\x2dpart3.device
    5.699s dev-nvme0n1p2.device
    5.699s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940\x2dpart2.device
    5.699s dev-disk-by\x2dpartlabel-Microsoft\x5cx20reserved\x5cx20partition.device
    5.699s dev-disk-by\x2ddiskseq-1\x2dpart2.device
    5.699s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1\x2dpart2.device
    5.699s dev-disk-by\x2dpartuuid-e63635d2\x2df93f\x2d4110\x2d84c1\x2deced22f19ce5.device
    5.699s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001\x2dpart2.device
    5.699s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1-nvme0n1p2.device
    5.699s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1\x2dpart2.device
    5.697s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1\x2dpart1.device
    5.697s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1-nvme0n1p1.device
    5.697s dev-disk-by\x2dpartuuid-da816232\x2d469f\x2d4896\x2d970d\x2d633fb329f2a8.device
    5.697s dev-nvme0n1p1.device
    5.697s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940\x2dpart1.device
    5.697s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1\x2dpart1.device
    5.697s dev-disk-by\x2ddiskseq-1\x2dpart1.device
    5.697s dev-disk-by\x2dlabel-SYSTEM.device
    5.697s dev-disk-by\x2dpartlabel-EFI\x5cx20system\x5cx20partition.device
    5.697s dev-disk-by\x2duuid-92A1\x2dDD3A.device
    5.697s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001\x2dpart1.device
    5.696s sys-devices-pci0000:00-0000:00:1c.0-0000:01:00.0-nvme-nvme0-nvme0n1.device
    5.696s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940.device
    5.696s dev-nvme0n1.device
    5.696s dev-disk-by\x2did-nvme\x2dSAMSUNG_MZVLQ256HAJD\x2d000_S591NX0R839940_1.device
    5.696s dev-disk-by\x2did-nvme\x2deui.35393130528399400025385800000001.device
    5.696s dev-disk-by\x2ddiskseq-1.device
    5.696s dev-disk-by\x2dpath-pci\x2d0000:01:00.0\x2dnvme\x2d1.device
    5.522s sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2deDP\x2d1-intel_backlight.device
    5.176s sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d2-3\x2d2:1.0-host1-target1:0:0-1:0:0:0-block-sda.device
    5.176s dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusb\x2d0:2:1.0\x2dscsi\x2d0:0:0:0.device
    5.176s dev-sda.device
    5.176s dev-disk-by\x2ddiskseq-2.device
    5.176s dev-disk-by\x2dpath-pci\x2d0000:00:14.0\x2dusbv2\x2d0:2:1.0\x2dscsi\x2d0:0:0:0.device
    5.176s dev-disk-by\x2did-usb\x2dSanDisk_Ultra_Fit_4C530001190318108265\x2d0:0.device
    2.472s initrd-switch-root.service
    1.390s systemd-vconsole-setup.service
     503ms systemd-fsck@dev-disk-by\x2duuid-4354\x2d283A.service
     499ms homefiller.service
     422ms systemd-networkd.service
     346ms systemd-resolved.service
     302ms systemd-udev-trigger.service
     279ms bluetooth.service
     278ms systemd-remount-fs.service
     276ms upower.service
     271ms dbus.service
     260ms systemd-network-generator.service
     233ms modprobe@fuse.service
     223ms systemd-modules-load.service
     216ms systemd-journald.service
     213ms systemd-backlight@backlight:intel_backlight.service
     183ms systemd-tmpfiles-clean.service
     159ms alsa-restore.service
     157ms systemd-tmpfiles-setup.service
     151ms systemd-udevd.service
     150ms kmod-static-nodes.service
     144ms systemd-rfkill.service
     139ms systemd-tmpfiles-setup-dev-early.service
     133ms dev-hugepages.mount
     129ms lm_sensors.service
     129ms user@1000.service
     129ms systemd-boot-update.service
     129ms dev-mqueue.mount
     125ms sys-kernel-debug.mount
     123ms sys-kernel-tracing.mount
     118ms tmp.mount
     107ms systemd-fsck-root.service
      92ms systemd-sysctl.service
      86ms systemd-user-sessions.service
      79ms systemd-timesyncd.service
      77ms systemd-random-seed.service
      75ms modprobe@loop.service
      72ms polkit.service
      58ms systemd-homed.service
      56ms systemd-update-utmp.service
      52ms initrd-parse-etc.service
      46ms getty@tty1.service
      46ms systemd-tmpfiles-setup-dev.service
      43ms systemd-logind.service
      34ms systemd-userdbd.service
      29ms initrd-cleanup.service
      29ms modprobe@efi_pstore.service
      26ms boot.mount
      26ms user-runtime-dir@1000.service
      23ms sys-fs-fuse-connections.mount
      20ms sys-kernel-config.mount
      14ms systemd-homed-activate.service
      12ms home.mount
      11ms systemd-battery-check.service
      11ms rtkit-daemon.service
      10ms var-tmp.mount
      10ms initrd-udevadm-cleanup-db.service
       4ms modprobe@dm_mod.service
       3ms modprobe@drm.service
       1ms modprobe@configfs.service

And the result of

# systemd-analyze plot >plot.svg

is here.
If this is the wrong way of sharing svgs, please tell me and I'll correct it.

What should I do next then?

Arch Linux

#26 2023-10-16 17:44:33

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#27 2023-10-17 03:03:59

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#28 2023-10-17 03:21:23

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#29 2023-10-17 03:24:21

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#30 2023-10-17 03:29:32

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#31 2023-10-17 03:43:36

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#32 2023-10-17 04:00:00

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#33 2023-10-17 04:27:45

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#34 2023-10-17 05:34:53

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#35 2023-10-17 05:44:56

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#36 2023-10-17 06:04:36

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#37 2023-10-17 06:24:31

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#38 2023-10-17 06:30:59

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#39 2023-10-17 06:39:37

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#40 2023-10-17 06:43:31

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#41 2023-10-17 06:47:16

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#42 2023-10-17 07:02:43

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#43 2023-10-17 07:09:25

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#44 2023-10-17 07:11:13

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#45 2023-10-17 07:16:00

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#46 2023-10-17 07:47:14

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#47 2023-10-17 07:52:41

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#48 2023-10-17 08:37:50

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#49 2023-10-17 09:06:56

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

#50 2023-10-17 11:13:55

Re: [SOLVED] "Failed to start Virtual Console Setup" after last update

Board footer