You are not logged in.
Hi, recently this problem started happening to me, basically:
When I boot into Arch Linux, sometimes it works fine and all my OS functionally stays working, but other times seems like it half-load the linux modules or something like that (sometimes the first thing I notice is the fact that my upper statusbar doesn't load, along with that the youtube videos cannot start, it stays in an infinite loop; other times It's worse and I can't even acess some websites, like Reddit for example).
Another problem I started to have is: the pipewire randomly just stops for no apparent reason (even if I'm idle it just stops in random times, or at least some part of it does, and I have to do 'pipewire &! exit' for the audio to work again).
What I have tried:
1 - Remove secure boot (I had set it)
2 - Change back to the default linux kernel (I had switched it to the linux-zen kernel)
3 - Rerun the configuration I initially had for dwm (In case I might have messed something)
Neither of these attempts solved the issue.
Thanks.
Offline
sometimes the first thing I notice is the fact that my upper statusbar doesn't load, along with that the youtube videos cannot start, it stays in an infinite loop; other times It's worse and I can't even acess some websites, like Reddit for example
is very unlikely related to
half-load the linux modules
which in and by itself isn't really a thing.
Please post your complete system journal for such boot, eg
sudo journalctl -b -1 | curl -F 'file=@-' 0x0.st
for the previous one ("-1", increase the digit to go further back in time) to establish some actual data for the problem.
Offline
sometimes the first thing I notice is the fact that my upper statusbar doesn't load, along with that the youtube videos cannot start, it stays in an infinite loop; other times It's worse and I can't even acess some websites, like Reddit for example
is very unlikely related to
half-load the linux modules
which in and by itself isn't really a thing.
Please post your complete system journal for such boot, eg
sudo journalctl -b -1 | curl -F 'file=@-' 0x0.st
for the previous one ("-1", increase the digit to go further back in time) to establish some actual data for the problem.
Thanks for the reply.
Here: http://0x0.st/HJJN.txt
Offline
Most errors in there relate to bogs cron jobs that try to rsync w/o required access permissions and trigger dunst (through some mutt script?) w/o a access to an X11 server.
Oct 19 16:05:56 host pipewire[1298]: mod.protocol-native: server 0x5605c6650d30: unable to lock lockfile '/run/user/1000/pipewire-0.lock': Resource temporarily unavailable (maybe another daemon is running)
Oct 19 16:05:56 host pipewire[1298]: pw.conf: 0x5605c660a950: could not load mandatory module "libpipewire-module-protocol-native": Resource temporarily unavailable
Oct 19 16:05:56 host pipewire[1298]: default: failed to create context: Resource temporarily unavailable
Oct 19 16:05:56 host systemd[1061]: pipewire.service: Main process exited, code=exited, status=245/KSM
Oct 19 16:05:56 host systemd[1061]: pipewire.service: Failed with result 'exit-code'.
Oct 19 16:05:57 host systemd[1061]: pipewire.service: Scheduled restart job, restart counter is at 5.
Oct 19 16:05:57 host systemd[1061]: pipewire.service: Start request repeated too quickly.
Oct 19 16:05:57 host systemd[1061]: pipewire.service: Failed with result 'exit-code'.
Oct 19 16:05:57 host systemd[1061]: Failed to start PipeWire Multimedia Service.
Oct 19 16:05:57 host systemd[1061]: pipewire.socket: Failed with result 'service-start-limit-hit'.
There seems an issue w/ the pipewire activation, but other than that no signs of major trouble - certainly nothing kernel related.
=> Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and on a wild guess: get rid of xf86-video-intel
Offline
Most errors in there relate to bogs cron jobs that try to rsync w/o required access permissions and trigger dunst (through some mutt script?) w/o a access to an X11 server.
This is one of the problems I'm trying to solve; initially I was getting notifications from new emails I was receiving in neomutt (auto sync through a mutt wizard script), but somehow it stopped, I'll look it up to see if I can figure out what permissions these are.
There seems an issue w/ the pipewire activation, but other than that no signs of major trouble - certainly nothing kernel related.
This might be what the random pipewire stops might be about.
I'm thinking about reinstalling my whole system to get ride of the problems, I used a script to setup my minimal environment, since it was the first time I was going into linux. Maybe setting things by my own is a better option now; the script came with dwm and other simplistic things (which I like), but honestly all the troubleshoot I had was devastating, I'm thinking about using xmonad instead, I think it might be more stable/constant, because of Haskell and there might be more polishment in it. I'll look at https://wiki.archlinux.org/title/genera … mendations and try to set it all by myself. Could you tell me what desktop/window-manager you use, for curiosity?
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and on a wild guess: get rid of xf86-video-intel
Right when I was about to send you the log my laptop run out of battery, now I couldn't start it with those problems (reboot multiple times), I'll send the Xorg log, although not sure if it will also show the faults.
[ 35.267]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 35.267] Current Operating System: Linux host 6.5.7-zen2-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Sun, 15 Oct 2023 22:10:35 +0000 x86_64
[ 35.267] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-zen.img cryptdevice=PARTUUID=a603020f-3c1a-4ca6-9a23-dd6475a20b3b:luksdev root=/dev/mapper/luksdev zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs
[ 35.267]
[ 35.267] Current version of pixman: 0.42.2
[ 35.267] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.267] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.267] (==) Log file: "/home/user/.local/share/xorg/Xorg.0.log", Time: Sat Oct 21 18:12:20 2023
[ 35.268] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 35.268] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.268] (==) No Layout section. Using the first Screen section.
[ 35.268] (==) No screen section available. Using defaults.
[ 35.268] (**) |-->Screen "Default Screen Section" (0)
[ 35.268] (**) | |-->Monitor "<default monitor>"
[ 35.268] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.268] (==) Automatically adding devices
[ 35.268] (==) Automatically enabling devices
[ 35.268] (==) Automatically adding GPU devices
[ 35.268] (==) Automatically binding GPU devices
[ 35.268] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 35.268] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 35.268] Entry deleted from font path.
[ 35.269] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 35.269] Entry deleted from font path.
[ 35.269] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 35.269] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[ 35.269] Entry deleted from font path.
[ 35.269] (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[ 35.269] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 35.269] Entry deleted from font path.
[ 35.269] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 35.269] Entry deleted from font path.
[ 35.269] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 35.269] Entry deleted from font path.
[ 35.269] (==) FontPath set to:
[ 35.269] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.269] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.269] (II) Module ABI versions:
[ 35.269] X.Org ANSI C Emulation: 0.4
[ 35.269] X.Org Video Driver: 25.2
[ 35.269] X.Org XInput driver : 24.4
[ 35.269] X.Org Server Extension : 10.0
[ 35.269] (++) using VT number 1
[ 35.270] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 35.270] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 35.270] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 35.270] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 35.271] (--) PCI:*(0@0:2:0) 8086:9a49:144d:c195 rev 1, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 35.271] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 35.271] (II) LoadModule: "glx"
[ 35.271] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 35.279] (II) Module glx: vendor="X.Org Foundation"
[ 35.279] compiled for 1.21.1.8, module version = 1.0.0
[ 35.279] ABI class: X.Org Server Extension, version 10.0
[ 35.279] (==) Matched intel as autoconfigured driver 0
[ 35.279] (==) Matched modesetting as autoconfigured driver 1
[ 35.279] (==) Matched fbdev as autoconfigured driver 2
[ 35.279] (==) Matched vesa as autoconfigured driver 3
[ 35.279] (==) Assigned the driver to the xf86ConfigLayout
[ 35.279] (II) LoadModule: "intel"
[ 35.279] (WW) Warning, couldn't open module intel
[ 35.279] (EE) Failed to load module "intel" (module does not exist, 0)
[ 35.279] (II) LoadModule: "modesetting"
[ 35.279] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 35.283] (II) Module modesetting: vendor="X.Org Foundation"
[ 35.283] compiled for 1.21.1.8, module version = 1.21.1
[ 35.283] Module class: X.Org Video Driver
[ 35.283] ABI class: X.Org Video Driver, version 25.2
[ 35.283] (II) LoadModule: "fbdev"
[ 35.283] (WW) Warning, couldn't open module fbdev
[ 35.283] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 35.283] (II) LoadModule: "vesa"
[ 35.283] (WW) Warning, couldn't open module vesa
[ 35.283] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 35.283] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 35.283] (II) modeset(0): using drv /dev/dri/card1
[ 35.283] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 35.283] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.283] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 35.283] (==) modeset(0): RGB weight 888
[ 35.283] (==) modeset(0): Default visual is TrueColor
[ 35.283] (II) Loading sub module "glamoregl"
[ 35.283] (II) LoadModule: "glamoregl"
[ 35.283] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 35.288] (II) Module glamoregl: vendor="X.Org Foundation"
[ 35.288] compiled for 1.21.1.8, module version = 1.0.1
[ 35.288] ABI class: X.Org ANSI C Emulation, version 0.4
[ 35.544] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Xe Graphics (TGL GT2)
[ 35.544] (II) modeset(0): glamor initialized
[ 35.544] (==) modeset(0): VariableRefresh: disabled
[ 35.544] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 35.546] (II) modeset(0): Output eDP-1 has no monitor section
[ 35.546] (II) modeset(0): Output DP-1 has no monitor section
[ 35.546] (II) modeset(0): Output HDMI-1 has no monitor section
[ 35.549] (II) modeset(0): Output HDMI-2 has no monitor section
[ 35.550] (II) modeset(0): EDID for output eDP-1
[ 35.550] (II) modeset(0): Manufacturer: BOE Model: 812 Serial#: 0
[ 35.550] (II) modeset(0): Year: 2018 Week: 31
[ 35.550] (II) modeset(0): EDID Version: 1.4
[ 35.550] (II) modeset(0): Digital Display Input
[ 35.550] (II) modeset(0): 8 bits per channel
[ 35.550] (II) modeset(0): Digital interface is DisplayPort
[ 35.550] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 35.550] (II) modeset(0): Gamma: 2.20
[ 35.550] (II) modeset(0): No DPMS capabilities specified
[ 35.550] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 35.550] (II) modeset(0): First detailed timing is preferred mode
[ 35.550] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 35.550] (II) modeset(0): Display is continuous-frequency
[ 35.550] (II) modeset(0): redX: 0.582 redY: 0.359 greenX: 0.354 greenY: 0.567
[ 35.550] (II) modeset(0): blueX: 0.162 blueY: 0.129 whiteX: 0.312 whiteY: 0.328
[ 35.550] (II) modeset(0): Manufacturer's mask: 0
[ 35.550] (II) modeset(0): Supported detailed timing:
[ 35.550] (II) modeset(0): clock: 148.5 MHz Image Size: 344 x 194 mm
[ 35.550] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2230 h_border: 0
[ 35.550] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1110 v_border: 0
[ 35.550] (II) modeset(0): BOE CQ
[ 35.550] (II) modeset(0): NT156FHM-N61
[ 35.550] (II) modeset(0): EDID (in hex):
[ 35.550] (II) modeset(0): 00ffffffffffff0009e5120800000000
[ 35.550] (II) modeset(0): 1f1c0104a5221378030980955c5a9129
[ 35.550] (II) modeset(0): 21505400000001010101010101010101
[ 35.550] (II) modeset(0): 010101010101033a803671381e403020
[ 35.550] (II) modeset(0): 360058c21000001a0000000000000000
[ 35.550] (II) modeset(0): 00000000000000000000000000fe0042
[ 35.550] (II) modeset(0): 4f452043510a202020202020000000fe
[ 35.550] (II) modeset(0): 004e5431353646484d2d4e36310a00ed
[ 35.550] (II) modeset(0): Printing probed modes for output eDP-1
[ 35.550] (II) modeset(0): Modeline "1920x1080"x60.0 148.51 1920 1968 2000 2230 1080 1083 1089 1110 +hsync -vsync (66.6 kHz eP)
[ 35.550] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 35.550] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 35.550] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 35.550] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 35.550] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 35.550] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 35.550] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 35.550] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 35.550] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 35.550] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 35.550] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 35.550] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 35.550] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 35.550] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 35.551] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 35.551] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 35.551] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 35.551] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 35.551] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 35.551] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 35.551] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 35.551] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 35.551] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 35.551] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 35.551] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 35.551] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 35.551] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 35.551] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 35.551] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 35.551] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 35.551] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 35.551] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 35.551] (II) modeset(0): EDID for output DP-1
[ 35.551] (II) modeset(0): EDID for output HDMI-1
[ 35.551] (II) modeset(0): EDID for output HDMI-2
[ 35.551] (II) modeset(0): Output eDP-1 connected
[ 35.551] (II) modeset(0): Output DP-1 disconnected
[ 35.551] (II) modeset(0): Output HDMI-1 disconnected
[ 35.551] (II) modeset(0): Output HDMI-2 disconnected
[ 35.551] (II) modeset(0): Using exact sizes for initial modes
[ 35.551] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 35.551] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 35.551] (==) modeset(0): DPI set to (96, 96)
[ 35.551] (II) Loading sub module "fb"
[ 35.551] (II) LoadModule: "fb"
[ 35.551] (II) Module "fb" already built-in
[ 35.565] (==) modeset(0): Backing store enabled
[ 35.565] (==) modeset(0): Silken mouse enabled
[ 35.643] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 35.643] (==) modeset(0): DPMS enabled
[ 35.643] (II) modeset(0): [DRI2] Setup complete
[ 35.643] (II) modeset(0): [DRI2] DRI driver: iris
[ 35.643] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 35.643] (II) Initializing extension Generic Event Extension
[ 35.643] (II) Initializing extension SHAPE
[ 35.643] (II) Initializing extension MIT-SHM
[ 35.644] (II) Initializing extension XInputExtension
[ 35.644] (II) Initializing extension XTEST
[ 35.644] (II) Initializing extension BIG-REQUESTS
[ 35.644] (II) Initializing extension SYNC
[ 35.644] (II) Initializing extension XKEYBOARD
[ 35.644] (II) Initializing extension XC-MISC
[ 35.645] (II) Initializing extension SECURITY
[ 35.645] (II) Initializing extension XFIXES
[ 35.645] (II) Initializing extension RENDER
[ 35.645] (II) Initializing extension RANDR
[ 35.646] (II) Initializing extension COMPOSITE
[ 35.646] (II) Initializing extension DAMAGE
[ 35.646] (II) Initializing extension MIT-SCREEN-SAVER
[ 35.646] (II) Initializing extension DOUBLE-BUFFER
[ 35.646] (II) Initializing extension RECORD
[ 35.646] (II) Initializing extension DPMS
[ 35.647] (II) Initializing extension Present
[ 35.647] (II) Initializing extension DRI3
[ 35.647] (II) Initializing extension X-Resource
[ 35.647] (II) Initializing extension XVideo
[ 35.647] (II) Initializing extension XVideo-MotionCompensation
[ 35.647] (II) Initializing extension GLX
[ 35.658] (II) AIGLX: Loaded and initialized iris
[ 35.658] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 35.658] (II) Initializing extension XFree86-VidModeExtension
[ 35.658] (II) Initializing extension XFree86-DGA
[ 35.658] (II) Initializing extension XFree86-DRI
[ 35.658] (II) Initializing extension DRI2
[ 35.659] (II) modeset(0): Damage tracking initialized
[ 35.659] (II) modeset(0): Setting screen physical size to 508 x 285
[ 35.691] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 35.691] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 35.691] (**) Power Button: Applying InputClass "system-keyboard"
[ 35.691] (II) LoadModule: "libinput"
[ 35.691] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 35.696] (II) Module libinput: vendor="X.Org Foundation"
[ 35.696] compiled for 1.21.1.8, module version = 1.4.0
[ 35.696] Module class: X.Org XInput Driver
[ 35.696] ABI class: X.Org XInput driver, version 24.4
[ 35.696] (II) Using input driver 'libinput' for 'Power Button'
[ 35.696] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[ 35.697] (**) Power Button: always reports core events
[ 35.697] (**) Option "Device" "/dev/input/event2"
[ 35.700] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 35.700] (II) event2 - Power Button: device is a keyboard
[ 35.700] (II) event2 - Power Button: device removed
[ 35.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 35.700] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.700] (**) Option "xkb_model" "abnt2"
[ 35.700] (**) Option "xkb_layout" "br"
[ 35.700] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 35.711] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 35.711] (II) event2 - Power Button: device is a keyboard
[ 35.711] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 35.711] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 35.711] (**) Video Bus: Applying InputClass "system-keyboard"
[ 35.711] (II) Using input driver 'libinput' for 'Video Bus'
[ 35.712] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[ 35.712] (**) Video Bus: always reports core events
[ 35.712] (**) Option "Device" "/dev/input/event7"
[ 35.712] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 35.712] (II) event7 - Video Bus: device is a keyboard
[ 35.712] (II) event7 - Video Bus: device removed
[ 35.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21/event7"
[ 35.712] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 35.712] (**) Option "xkb_model" "abnt2"
[ 35.712] (**) Option "xkb_layout" "br"
[ 35.713] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 35.713] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 35.713] (II) event7 - Video Bus: device is a keyboard
[ 35.713] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 35.713] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 35.713] (**) Power Button: Applying InputClass "system-keyboard"
[ 35.713] (II) Using input driver 'libinput' for 'Power Button'
[ 35.714] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[ 35.714] (**) Power Button: always reports core events
[ 35.714] (**) Option "Device" "/dev/input/event1"
[ 35.714] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 35.714] (II) event1 - Power Button: device is a keyboard
[ 35.714] (II) event1 - Power Button: device removed
[ 35.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 35.714] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 35.714] (**) Option "xkb_model" "abnt2"
[ 35.714] (**) Option "xkb_layout" "br"
[ 35.714] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 35.715] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 35.715] (II) event1 - Power Button: device is a keyboard
[ 35.715] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 35.715] (II) No input driver specified, ignoring this device.
[ 35.715] (II) This device may have been added with another device file.
[ 35.716] (II) config/udev: Adding input device Logitech M720 Triathlon (/dev/input/event4)
[ 35.716] (**) Logitech M720 Triathlon: Applying InputClass "libinput pointer catchall"
[ 35.716] (**) Logitech M720 Triathlon: Applying InputClass "libinput keyboard catchall"
[ 35.716] (**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
[ 35.716] (II) Using input driver 'libinput' for 'Logitech M720 Triathlon'
[ 35.716] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 35.716] (**) Logitech M720 Triathlon: always reports core events
[ 35.716] (**) Option "Device" "/dev/input/event4"
[ 35.717] (II) event4 - Logitech M720 Triathlon: is tagged by udev as: Keyboard Mouse
[ 35.717] (II) event4 - Logitech M720 Triathlon: device is a pointer
[ 35.717] (II) event4 - Logitech M720 Triathlon: device is a keyboard
[ 35.717] (II) event4 - Logitech M720 Triathlon: device removed
[ 35.717] (II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.717] (II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.717] (II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.717] (II) libinput: Logitech M720 Triathlon: needs a virtual subdevice
[ 35.717] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input14/event4"
[ 35.717] (II) XINPUT: Adding extended input device "Logitech M720 Triathlon" (type: MOUSE, id 9)
[ 35.717] (**) Option "AccelerationScheme" "none"
[ 35.717] (**) Logitech M720 Triathlon: (accel) selected scheme none/0
[ 35.717] (**) Logitech M720 Triathlon: (accel) acceleration factor: 2.000
[ 35.717] (**) Logitech M720 Triathlon: (accel) acceleration threshold: 4
[ 35.718] (II) event4 - Logitech M720 Triathlon: is tagged by udev as: Keyboard Mouse
[ 35.718] (II) event4 - Logitech M720 Triathlon: device is a pointer
[ 35.718] (II) event4 - Logitech M720 Triathlon: device is a keyboard
[ 35.719] (II) config/udev: Adding input device Logitech M720 Triathlon (/dev/input/mouse0)
[ 35.719] (**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
[ 35.719] (II) No input driver specified, ignoring this device.
[ 35.719] (II) This device may have been added with another device file.
[ 35.719] (II) config/udev: Adding input device ELAN0B00:00 04F3:3192 Mouse (/dev/input/event5)
[ 35.719] (**) ELAN0B00:00 04F3:3192 Mouse: Applying InputClass "libinput pointer catchall"
[ 35.719] (II) Using input driver 'libinput' for 'ELAN0B00:00 04F3:3192 Mouse'
[ 35.719] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 33 paused 0
[ 35.719] (**) ELAN0B00:00 04F3:3192 Mouse: always reports core events
[ 35.719] (**) Option "Device" "/dev/input/event5"
[ 35.720] (II) event5 - ELAN0B00:00 04F3:3192 Mouse: is tagged by udev as: Mouse Pointingstick
[ 35.720] (II) event5 - ELAN0B00:00 04F3:3192 Mouse: device is a pointer
[ 35.720] (II) event5 - ELAN0B00:00 04F3:3192 Mouse: device removed
[ 35.720] (II) libinput: ELAN0B00:00 04F3:3192 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.720] (II) libinput: ELAN0B00:00 04F3:3192 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.721] (II) libinput: ELAN0B00:00 04F3:3192 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.721] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0B00:00/0018:04F3:3192.0005/input/input18/event5"
[ 35.721] (II) XINPUT: Adding extended input device "ELAN0B00:00 04F3:3192 Mouse" (type: MOUSE, id 10)
[ 35.721] (**) Option "AccelerationScheme" "none"
[ 35.721] (**) ELAN0B00:00 04F3:3192 Mouse: (accel) selected scheme none/0
[ 35.721] (**) ELAN0B00:00 04F3:3192 Mouse: (accel) acceleration factor: 2.000
[ 35.721] (**) ELAN0B00:00 04F3:3192 Mouse: (accel) acceleration threshold: 4
[ 35.721] (II) event5 - ELAN0B00:00 04F3:3192 Mouse: is tagged by udev as: Mouse Pointingstick
[ 35.722] (II) event5 - ELAN0B00:00 04F3:3192 Mouse: device is a pointer
[ 35.722] (II) config/udev: Adding input device ELAN0B00:00 04F3:3192 Mouse (/dev/input/mouse1)
[ 35.722] (II) No input driver specified, ignoring this device.
[ 35.722] (II) This device may have been added with another device file.
[ 35.723] (II) config/udev: Adding input device ELAN0B00:00 04F3:3192 Touchpad (/dev/input/event6)
[ 35.723] (**) ELAN0B00:00 04F3:3192 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 35.723] (**) ELAN0B00:00 04F3:3192 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 35.723] (II) Using input driver 'libinput' for 'ELAN0B00:00 04F3:3192 Touchpad'
[ 35.723] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 34 paused 0
[ 35.723] (**) ELAN0B00:00 04F3:3192 Touchpad: always reports core events
[ 35.723] (**) Option "Device" "/dev/input/event6"
[ 35.724] (II) event6 - ELAN0B00:00 04F3:3192 Touchpad: is tagged by udev as: Touchpad
[ 35.726] (II) event6 - ELAN0B00:00 04F3:3192 Touchpad: device is a touchpad
[ 35.726] (II) event6 - ELAN0B00:00 04F3:3192 Touchpad: device removed
[ 35.726] (**) Option "Tapping" "on"
[ 35.726] (II) libinput: ELAN0B00:00 04F3:3192 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.726] (II) libinput: ELAN0B00:00 04F3:3192 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.726] (II) libinput: ELAN0B00:00 04F3:3192 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0B00:00/0018:04F3:3192.0005/input/input20/event6"
[ 35.726] (II) XINPUT: Adding extended input device "ELAN0B00:00 04F3:3192 Touchpad" (type: TOUCHPAD, id 11)
[ 35.728] (**) Option "AccelerationScheme" "none"
[ 35.728] (**) ELAN0B00:00 04F3:3192 Touchpad: (accel) selected scheme none/0
[ 35.728] (**) ELAN0B00:00 04F3:3192 Touchpad: (accel) acceleration factor: 2.000
[ 35.728] (**) ELAN0B00:00 04F3:3192 Touchpad: (accel) acceleration threshold: 4
[ 35.729] (II) event6 - ELAN0B00:00 04F3:3192 Touchpad: is tagged by udev as: Touchpad
[ 35.730] (II) event6 - ELAN0B00:00 04F3:3192 Touchpad: device is a touchpad
[ 35.731] (II) config/udev: Adding input device ELAN0B00:00 04F3:3192 Touchpad (/dev/input/mouse2)
[ 35.731] (II) No input driver specified, ignoring this device.
[ 35.731] (II) This device may have been added with another device file.
[ 35.731] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event8)
[ 35.731] (II) No input driver specified, ignoring this device.
[ 35.731] (II) This device may have been added with another device file.
[ 35.731] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 35.731] (II) No input driver specified, ignoring this device.
[ 35.731] (II) This device may have been added with another device file.
[ 35.732] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event10)
[ 35.732] (II) No input driver specified, ignoring this device.
[ 35.732] (II) This device may have been added with another device file.
[ 35.732] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event11)
[ 35.732] (II) No input driver specified, ignoring this device.
[ 35.732] (II) This device may have been added with another device file.
[ 35.732] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event12)
[ 35.732] (II) No input driver specified, ignoring this device.
[ 35.732] (II) This device may have been added with another device file.
[ 35.732] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 35.732] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 35.732] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 35.732] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 35.733] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[ 35.733] (**) AT Translated Set 2 keyboard: always reports core events
[ 35.733] (**) Option "Device" "/dev/input/event3"
[ 35.733] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 35.733] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 35.734] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 35.734] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 35.734] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 35.734] (**) Option "xkb_model" "abnt2"
[ 35.734] (**) Option "xkb_layout" "br"
[ 35.734] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 35.734] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 35.735] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 35.742] (**) Logitech M720 Triathlon: Applying InputClass "libinput pointer catchall"
[ 35.742] (**) Logitech M720 Triathlon: Applying InputClass "libinput keyboard catchall"
[ 35.742] (**) Logitech M720 Triathlon: Applying InputClass "system-keyboard"
[ 35.742] (II) Using input driver 'libinput' for 'Logitech M720 Triathlon'
[ 35.742] (II) systemd-logind: returning pre-existing fd for /dev/input/event4 13:68
[ 35.742] (**) Logitech M720 Triathlon: always reports core events
[ 35.742] (**) Option "Device" "/dev/input/event4"
[ 35.742] (II) libinput: Logitech M720 Triathlon: is a virtual subdevice
[ 35.742] (II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.742] (II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.742] (II) libinput: Logitech M720 Triathlon: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 35.742] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input14/event4"
[ 35.742] (II) XINPUT: Adding extended input device "Logitech M720 Triathlon" (type: KEYBOARD, id 13)
[ 35.742] (**) Option "xkb_model" "abnt2"
[ 35.742] (**) Option "xkb_layout" "br"
[ 35.742] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.112] (II) modeset(0): EDID vendor "BOE", prod id 2066
[ 36.112] (II) modeset(0): Printing DDC gathered Modelines:
[ 36.112] (II) modeset(0): Modeline "1920x1080"x0.0 148.51 1920 1968 2000 2230 1080 1083 1089 1110 +hsync -vsync (66.6 kHz eP)
[ 15218.503] (EE) event6 - ELAN0B00:00 04F3:3192 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.24.0/touchpad-jumping-cursors.html for details
[ 27541.463] (EE) event6 - ELAN0B00:00 04F3:3192 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.24.0/touchpad-jumping-cursors.html for details
[ 30113.329] (**) Option "fd" "27"
[ 30113.332] (II) event2 - Power Button: device removed
[ 30113.332] (**) Option "fd" "30"
[ 30113.332] (II) event7 - Video Bus: device removed
[ 30113.332] (**) Option "fd" "31"
[ 30113.332] (II) event1 - Power Button: device removed
[ 30113.332] (**) Option "fd" "32"
[ 30113.332] (**) Option "fd" "33"
[ 30113.332] (II) event5 - ELAN0B00:00 04F3:3192 Mouse: device removed
[ 30113.332] (**) Option "fd" "34"
[ 30113.332] (II) event6 - ELAN0B00:00 04F3:3192 Touchpad: device removed
[ 30113.332] (**) Option "fd" "35"
[ 30113.332] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 30113.332] (**) Option "fd" "32"
[ 30113.332] (II) event4 - Logitech M720 Triathlon: device removed
[ 30113.343] (II) UnloadModule: "libinput"
[ 30113.343] (II) systemd-logind: not releasing fd for 13:68, still in use
[ 30113.343] (II) UnloadModule: "libinput"
[ 30113.343] (II) systemd-logind: releasing fd for 13:67
[ 30113.348] (II) UnloadModule: "libinput"
[ 30113.348] (II) systemd-logind: releasing fd for 13:70
[ 30113.349] (II) UnloadModule: "libinput"
[ 30113.349] (II) systemd-logind: releasing fd for 13:69
[ 30113.349] (II) UnloadModule: "libinput"
[ 30113.349] (II) systemd-logind: releasing fd for 13:68
[ 30113.349] (II) UnloadModule: "libinput"
[ 30113.349] (II) systemd-logind: releasing fd for 13:65
[ 30113.349] (II) UnloadModule: "libinput"
[ 30113.349] (II) systemd-logind: releasing fd for 13:71
[ 30113.349] (II) UnloadModule: "libinput"
[ 30113.349] (II) systemd-logind: releasing fd for 13:66
[ 30113.396] (II) Server terminated successfully (0). Closing log file.
Offline
There's only a single intel chip, running on the modesetting driver.
The server might start too early and run into the simpledrm device, https://wiki.archlinux.org/title/Kernel … _KMS_start
You probably also want to enable https://wiki.archlinux.org/title/NVIDIA … de_setting (the presence of an nvidia GPU isn't relevant) and in doubt add "initcall_blacklist=simpledrm_platform_driver_init" to the https://wiki.archlinux.org/title/Kernel_parameters
You'll have to import the proper DISPLAY, DBUS_SESSION_BUS_ADDRESS and pot. XAUTHORITY variables into the cron job.
stat /run/user/1000/pipewire-0.lock
Offline