You are not logged in.

Pages: 1

#1 2023-10-18 10:00:01

solon
Member
Registered: 2023-07-12
Posts: 17

[SOLVED] Surround audio interface brakes ingame stereo sound RL

Hello all,
I use a Focusrite Scarlett 4i4 and I'm super happy with it, it works with any program without problems. However, when I play Rocket League via HeroicLauncher, the sound is no longer right. I no longer hear sounds that are "behind me", but only those in a small radius in front of me. When I connect my headphones directly to the PC, this problem is gone.

I already tried to set "enable-remixing = no" in my pulse config, but it didn't help.

I would be very happy about any suggestions.

Last edited by solon (2023-10-22 10:30:34)

Offline

#2 2023-10-18 10:39:17

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 22,194

Re: [SOLVED] Surround audio interface brakes ingame stereo sound RL

Which makes sense if the surround interface is configured for surround and you give it just stereo to output to. During the problematic situation what's your output for 

pactl list cards
pactl list sinks
pactl list sink-inputs

? Post that in code tags

Offline

#3 2023-10-18 10:54:09

solon
Member
Registered: 2023-07-12
Posts: 17

Re: [SOLVED] Surround audio interface brakes ingame stereo sound RL

$ pactl list cards                                                                                      
Card #0
	Name: alsa_card.pci-0000_01_00.1
	Driver: module-alsa-card.c
	Owner Module: 6
	Properties:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0x51080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "22bb"
		device.string = "1"
		device.description = "HDA NVidia"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 38668, available: yes)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 38468, available: yes)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 38468, available: yes)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 38468, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "MD21506
     "
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "MD21506
     "
			Part of profile(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "MD21506
     "
			Part of profile(s): output:hdmi-stereo-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "video-display"
				device.product.name = "MD21506
     "
			Part of profile(s): output:hdmi-stereo-extra3

Card #1
	Name: alsa_card.usb-046d_0804_C056F190-02
	Driver: module-alsa-card.c
	Owner Module: 7
	Properties:
		alsa.card = "4"
		alsa.card_name = "USB Device 0x46d:0x804"
		alsa.long_card_name = "USB Device 0x46d:0x804 at usb-0000:00:14.0-12.1, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:12.1:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.2/sound/card4"
		udev.id = "usb-046d_0804_C056F190-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0804"
		device.product.name = "Webcam C250"
		device.serial = "046d_0804_C056F190"
		device.form_factor = "webcam"
		device.string = "4"
		device.description = "Webcam C250"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	Profiles:
		input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: input:mono-fallback
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:mono-fallback

Card #2
	Name: alsa_card.usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00
	Driver: module-alsa-card.c
	Owner Module: 8
	Properties:
		alsa.card = "2"
		alsa.card_name = "Scarlett 4i4 USB"
		alsa.long_card_name = "Focusrite Scarlett 4i4 USB at usb-0000:00:14.0-4, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:4:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/sound/card2"
		udev.id = "usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00"
		device.bus = "usb"
		device.vendor.id = "1235"
		device.vendor.name = "Focusrite-Novation"
		device.product.id = "8212"
		device.product.name = "Scarlett 4i4 USB"
		device.serial = "Focusrite_Scarlett_4i4_USB_D885Y2308129CF"
		device.string = "2"
		device.description = "Scarlett 4i4 USB"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Profiles:
		input:multichannel-input: Multichannel Input (sinks: 0, sources: 1, priority: 1, available: yes)
		output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
		output:analog-surround-40+input:multichannel-input: Analog Surround 4.0 Output + Multichannel Input (sinks: 1, sources: 1, priority: 1201, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:analog-surround-40+input:multichannel-input
	Ports:
		analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
			Part of profile(s): output:analog-surround-40, output:analog-surround-40+input:multichannel-input

Card #3
	Name: alsa_card.usb-Generic_USB_Audio-00
	Driver: module-alsa-card.c
	Owner Module: 9
	Properties:
		alsa.card = "3"
		alsa.card_name = "USB Audio"
		alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-5, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:5:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/sound/card3"
		udev.id = "usb-Generic_USB_Audio-00"
		device.bus = "usb"
		device.vendor.id = "0db0"
		device.vendor.name = "Micro Star International"
		device.product.id = "d1d7"
		device.product.name = "USB Audio"
		device.serial = "Generic_USB_Audio"
		device.string = "3"
		device.description = "USB Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Profiles:
		HiFi 7+1: HiFi 7.1 channels (sinks: 3, sources: 2, priority: 1, available: yes)
		HiFi 5+1: HiFi 5.1 channels (sinks: 3, sources: 2, priority: 1, available: yes)
		HiFi: HiFi 2.0 channels (sinks: 3, sources: 2, priority: 8000, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: HiFi
	Ports:
		[Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, latency offset: 0 usec, availability unknown)
			Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
		[Out] Headphones: Front Headphones (type: Headphones, priority: 300, latency offset: 0 usec, not available)
			Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
		[Out] Speaker: Speakers (type: Speaker, priority: 200, latency offset: 0 usec, not available)
			Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
		[In] Mic1: Microphone (type: Mic, priority: 300, latency offset: 0 usec, not available)
			Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
		[In] Line1: Line Input (type: Line, priority: 100, latency offset: 0 usec, not available)
			Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi

Card #4
	Name: alsa_card.pci-0000_00_1f.3
	Driver: module-alsa-card.c
	Owner Module: 10
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0x6403120000 irq 177"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "7a50"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: off
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "video-display"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
$ pactl list sinks
Sink #0
	State: SUSPENDED
	Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
	Description: HDA NVidia Digital Stereo (HDMI)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 215 /   0% / -149.04 dB,   front-right: 215 /   0% / -149.04 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "MD21506"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0x51080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "22bb"
		device.string = "hdmi:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "HDA NVidia Digital Stereo (HDMI)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

Sink #1
	State: SUSPENDED
	Name: alsa_output.usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00.analog-surround-40
	Description: Scarlett 4i4 USB Analog Surround 4.0
	Driver: module-alsa-card.c
	Sample Specification: s32le 4ch 44100Hz
	Channel Map: front-left,front-right,rear-left,rear-right
	Owner Module: 8
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB,   rear-left: 65536 / 100% / 0.00 dB,   rear-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00.analog-surround-40.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "32"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "Scarlett 4i4 USB"
		alsa.long_card_name = "Focusrite Scarlett 4i4 USB at usb-0000:00:14.0-4, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:4:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/sound/card2"
		udev.id = "usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00"
		device.bus = "usb"
		device.vendor.id = "1235"
		device.vendor.name = "Focusrite-Novation"
		device.product.id = "8212"
		device.product.name = "Scarlett 4i4 USB"
		device.serial = "Focusrite_Scarlett_4i4_USB_D885Y2308129CF"
		device.string = "surround40:2"
		device.buffering.buffer_size = "1411200"
		device.buffering.fragment_size = "705600"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-surround-40"
		device.profile.description = "Analog Surround 4.0"
		device.description = "Scarlett 4i4 USB Analog Surround 4.0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		analog-output: Analog Output (type: Analog, priority: 9900, availability unknown)
	Active Port: analog-output
	Formats:
		pcm

Sink #2
	State: SUSPENDED
	Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__hw_Audio_3__sink
	Description: USB Audio S/PDIF Output
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 9
	Mute: no
	Volume: front-left: 65756 / 100% / 0.09 dB,   front-right: 65756 / 100% / 0.09 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Generic_USB_Audio-00.HiFi__hw_Audio_3__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio #3"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "3"
		alsa.card_name = "USB Audio"
		alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-5, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:5:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/sound/card3"
		udev.id = "usb-Generic_USB_Audio-00"
		device.bus = "usb"
		device.vendor.id = "0db0"
		device.vendor.name = "Micro Star International"
		device.product.id = "d1d7"
		device.product.name = "USB Audio"
		device.serial = "Generic_USB_Audio"
		device.string = "_ucm0007.hw:Audio,3"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: hw:Audio,3: sink"
		device.profile.description = "S/PDIF Output"
		alsa.mixer_device = "_ucm0007.hw:Audio"
		device.description = "USB Audio S/PDIF Output"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		[Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, availability unknown)
	Active Port: [Out] SPDIF
	Formats:
		pcm

Sink #3
	State: SUSPENDED
	Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__hw_Audio_1__sink
	Description: USB Audio Front Headphones
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 9
	Mute: no
	Volume: front-left: 66191 / 101% / 0.26 dB,   front-right: 66191 / 101% / 0.26 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Generic_USB_Audio-00.HiFi__hw_Audio_1__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio #1"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "1"
		alsa.card = "3"
		alsa.card_name = "USB Audio"
		alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-5, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:5:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/sound/card3"
		udev.id = "usb-Generic_USB_Audio-00"
		device.bus = "usb"
		device.vendor.id = "0db0"
		device.vendor.name = "Micro Star International"
		device.product.id = "d1d7"
		device.product.name = "USB Audio"
		device.serial = "Generic_USB_Audio"
		device.string = "_ucm0007.hw:Audio,1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: hw:Audio,1: sink"
		device.profile.description = "Front Headphones"
		alsa.mixer_device = "_ucm0007.hw:Audio"
		device.description = "USB Audio Front Headphones"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		[Out] Headphones: Front Headphones (type: Headphones, priority: 300, not available)
	Active Port: [Out] Headphones
	Formats:
		pcm

Sink #4
	State: SUSPENDED
	Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__hw_Audio__sink
	Description: USB Audio Speakers
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 9
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Generic_USB_Audio-00.HiFi__hw_Audio__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "3"
		alsa.card_name = "USB Audio"
		alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-5, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:5:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/sound/card3"
		udev.id = "usb-Generic_USB_Audio-00"
		device.bus = "usb"
		device.vendor.id = "0db0"
		device.vendor.name = "Micro Star International"
		device.product.id = "d1d7"
		device.product.name = "USB Audio"
		device.serial = "Generic_USB_Audio"
		device.string = "_ucm0007.hw:Audio"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: hw:Audio: sink"
		device.profile.description = "Speakers"
		alsa.mixer_device = "_ucm0007.hw:Audio"
		device.description = "USB Audio Speakers"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		[Out] Speaker: Speakers (type: Speaker, priority: 200, not available)
	Active Port: [Out] Speaker
	Formats:
		pcm
$ pactl list sink-inputs
Sink Input #9
	Driver: protocol-native.c
	Owner Module: 15
	Client: 6
	Sink: 1
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: yes
	Mute: no
	Volume: front-left: 31401 /  48% / -19.17 dB,   front-right: 31401 /  48% / -19.17 dB
	       balance 0.00
	Buffer Latency: 179844 usec
	Sink Latency: 0 usec
	Resample method: speex-float-1
	Properties:
		media.name = "(6) Dev Startup Day 1 - I'm Coding a Platform for Developers - YouTube"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "1545"
		application.process.user = "solon"
		application.process.host = "Solon-PC"
		application.process.binary = "firefox"
		application.language = "en_US.utf-8"
		window.x11.display = ":0"
		application.process.machine_id = "fd497806ed844d2ba0106427fb433dec"
		application.process.session_id = "1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Offline

#4 2023-10-18 11:03:43

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 22,194

Re: [SOLVED] Surround audio interface brakes ingame stereo sound RL

This isn't the output while playing Rocket League is it? In any case all of this is normal. What do you want? Do you plug in a stereo headset into your surround interface and want to still announce to applications that they should solely use the stereo channels, instead of 4-channels the focusrite gives them? You can allocate a remap sink 

pacmd load-module module-remap-sink sink_name="Stereo-Focusrite" master=alsa_output.usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00.analog-surround-40 channels=2 channel_map=front-right,front-left master_channel_map=front-right,front-left

and then move the applications in question to the remap sink so they can only "see" a stereo card. If this fixes things you cann add the command without the leading pacmd to the end of your /etc/pulse/default.pa like so 

.nofail
load-module module-remap-sink sink_name="Stereo-Focusrite"  master=alsa_output.usb-Focusrite_Scarlett_4i4_USB_D885Y2308129CF-00.analog-surround-40 channels=2 channel_map=front-right,front-left master_channel_map=front-right,front-left

Last edited by V1del (2023-10-18 11:05:48)

Offline

#5 2023-10-19 07:28:18

solon
Member
Registered: 2023-07-12
Posts: 17

Re: [SOLVED] Surround audio interface brakes ingame stereo sound RL

Yes it is the output while playing Rocket League. I don't know why it isn't showing up or what to do about is.
And I guess I can't use the remap sink then because I can't move a application I don't see right? hmm

Edit: I left pavucontrol open while starting the game and the game is actually showing up as playback but only while with the mouse hovered over the game / in game

Last edited by solon (2023-10-19 07:30:46)

Offline

#6 2023-10-19 12:35:51

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 22,194

Re: [SOLVED] Surround audio interface brakes ingame stereo sound RL

find a way to make the game not mute itself when losing focus, or prepare a command of some sort. since you can't move by application name but just by index that's a bit of a conoundrum. can you get me the list sinkiinputs output with rocketleague present? E.g. 

sleep 5 && pactl list sink-inputs

in a background terminal or so.

Offline

#7 2023-10-22 10:30:00

solon
Member
Registered: 2023-07-12
Posts: 17

Re: [SOLVED] Surround audio interface brakes ingame stereo sound RL

After an amount of time I'm very ashamed of I figured out that restarting pulseaudio, running your command and setting the remapped channel as default it now works like a charm.
Thank you so so much <3

Offline

Pages: 1

Board footer

Powered by FluxBB