You are not logged in.

Pages: 1

#1 2023-11-10 12:46:00

glennec
Member
Registered: 2023-11-09
Posts: 3

tempest gaming speakers not showing up in dmesg neither in lsusb

Hello,
I would like to explain my issue. I recently installed Arch Linux on my main everyday use computer. I am currently experiencing problems with the speakers as they are not showing up in the audio settings. Additionally, there is no indication when I plug or unplug the USB in the corresponding adapter in dmesg, and it doesn't show up when I run lsusb. Finally, I also don't see the audio card in /proc/asound/cards.

I am currently using Pipewire; initially, I tried PulseAudio, but I didn't delve deeply into the issue, and it didn't work either. I hope that with the information I have provided, you may be able to identify the problem.

List of packages i have installed:

[glenn@mybox ~]$ sudo pacman -Qqe
amd-ucode
ark
base
base-devel
dolphin
efibootmgr
egl-wayland
firefox
gst-plugin-pipewire
htop
iwd
kate
konsole
libpulse
linux
linux-firmware
nano
neofetch
networkmanager
openssh
pavucontrol
pipewire
pipewire-alsa
pipewire-jack
pipewire-pulse
plasma-meta
plasma-wayland-session
smartmontools
sof-firmware
usbutils
vim
wget
wireless_tools
wireplumber
xdg-utils

LSUSB:

[glenn@mybox ~]$ sudo lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0480:0900 Toshiba America Inc MQ04UBF100
Bus 001 Device 006: ID 0b0e:0300 GN Netcom Jabra EVOLVE 20 MS
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 003: ID 1a2c:2124 China Resource Semico Co., Ltd Keyboard
Bus 005 Device 004: ID 093a:2521 Pixart Imaging, Inc. Optical Mouse
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

ASOUND/CARDS

[glenn@mybox ~]$ cat /proc/asound/cards 
 0 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xf7080000 irq 62
 1 [Generic        ]: HDA-Intel - HD-Audio Generic
                      HD-Audio Generic at 0xf7700000 irq 64
 2 [MS             ]: USB-Audio - Jabra EVOLVE 20 MS
                      GN Netcom A/S Jabra EVOLVE 20 MS at usb-0000:03:00.0-4, full speed

DMESG:

[    0.000000] ACPI: Reserving CRAT table memory at [mem 0xdbc99a18-0xdbc9a5e7]
[    0.000000] ACPI: Reserving CDIT table memory at [mem 0xdbc9a5e8-0xdbc9a610]
[    0.000000] ACPI: Reserving BGRT table memory at [mem 0xdbc9a618-0xdbc9a64f]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbc9a650-0xdbc9c399]
[    0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbc9c3a0-0xdbc9c45e]
[    0.000000] ACPI: Reserving WSMT table memory at [mem 0xdbc9c460-0xdbc9c487]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009d81fff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000db62dfff]
[    0.000000]   node   0: [mem 0x00000000dcaac000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 638 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 11 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 5246 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] e820: update [mem 0xd7323000-0xd737ffff] usable ==> reserved
[    0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09d82000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd6004000-0xd6004fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd6023000-0xd6023fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7276000-0xd7276fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7284000-0xd7284fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7323000-0xd737ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7450000-0xd7450fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdb62e000-0xdb772fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdb773000-0xdb7effff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdb7f0000-0xdbd08fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdbd09000-0xdcaabfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.000000] Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux.img root=PARTUUID=1b39660e-6a90-4213-b2b1-82d04a00cb42 rw rootfstype=ext4
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.000000] printk: log_buf_len min size: 131072 bytes
[    0.000000] printk: log_buf_len: 262144 bytes
[    0.000000] printk: early log buf free: 117608(89%)
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4115495
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000] software IO TLB: area num 32.
[    0.000000] Memory: 16196760K/16723936K available (16384K kernel code, 2132K rwdata, 13064K rodata, 3404K init, 3852K bss, 526920K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] ftrace: allocating 48783 entries in 191 pages
[    0.000000] ftrace: allocated 191 pages with 7 groups
[    0.000000] Dynamic Preempt: full
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.000000] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.000000] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20230628
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] AMD-Vi: Using global IVHD EFR:0xf77ef22294ada, EFR2:0x0
[    0.000000] APIC: Switched APIC routing to: physical flat
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.026666] tsc: Unable to calibrate against PIT
[    0.026666] tsc: using HPET reference calibration
[    0.026666] tsc: Detected 3399.475 MHz processor
[    0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x31005ebca72, max_idle_ns: 440795214783 ns
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6801.23 BogoMIPS (lpj=11331583)
[    0.000018] AMD Zen1 DIV0 bug detected. Disable SMT for full protection.
[    0.000043] LVT offset 1 assigned for vector 0xf9
[    0.000107] LVT offset 2 assigned for vector 0xf4
[    0.000122] process: using mwait in idle threads
[    0.000124] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.000125] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.000127] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.000129] Spectre V2 : Mitigation: Retpolines
[    0.000129] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.000130] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.000131] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.000131] RETBleed: Mitigation: untrained return thunk
[    0.000133] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.000134] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.000135] Speculative Return Stack Overflow: Mitigation: safe RET
[    0.000139] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000140] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000141] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000142] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000143] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.019865] Freeing SMP alternatives memory: 40K
[    0.019869] pid_max: default: 32768 minimum: 301
[    0.025956] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.025991] landlock: Up and running.
[    0.025993] Yama: becoming mindful.
[    0.025999] LSM support for eBPF active
[    0.026059] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.026086] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.134428] smpboot: CPU0: AMD Ryzen 5 2600 Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.134653] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.134675] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.134698] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[    0.134723] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.134729] ... version:                0
[    0.134730] ... bit width:              48
[    0.134731] ... generic registers:      6
[    0.134732] ... value mask:             0000ffffffffffff
[    0.134734] ... max period:             00007fffffffffff
[    0.134735] ... fixed-purpose events:   0
[    0.134736] ... event mask:             000000000000003f
[    0.134835] signal: max sigframe size: 1776
[    0.134863] rcu: Hierarchical SRCU implementation.
[    0.134864] rcu:     Max phase no-delay instances is 1000.
[    0.136771] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.137079] smp: Bringing up secondary CPUs ...
[    0.137209] smpboot: x86: Booting SMP configuration:
[    0.137210] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.162007] smp: Brought up 1 node, 12 CPUs
[    0.162007] smpboot: Max logical packages: 3
[    0.162007] smpboot: Total of 12 processors activated (81620.87 BogoMIPS)
[    0.165104] devtmpfs: initialized
[    0.165104] x86/mm: Memory block size: 128MB
[    0.168163] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[    0.168163] ACPI: PM: Registering ACPI NVS region [mem 0xdb7f0000-0xdbd08fff] (5345280 bytes)
[    0.168163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.168163] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.168163] pinctrl core: initialized pinctrl subsystem
[    0.168163] PM: RTC time: 12:15:56, date: 2023-11-10
[    0.168163] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.168163] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.168163] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.168163] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.168163] audit: initializing netlink subsys (disabled)
[    0.170036] audit: type=2000 audit(1699618556.196:1): state=initialized audit_enabled=0 res=1
[    0.170175] thermal_sys: Registered thermal governor 'fair_share'
[    0.170177] thermal_sys: Registered thermal governor 'bang_bang'
[    0.170179] thermal_sys: Registered thermal governor 'step_wise'
[    0.170180] thermal_sys: Registered thermal governor 'user_space'
[    0.170182] thermal_sys: Registered thermal governor 'power_allocator'
[    0.170206] cpuidle: using governor ladder
[    0.170206] cpuidle: using governor menu
[    0.170206] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.170233] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.170239] PCI: not using MMCONFIG
[    0.170240] PCI: Using configuration type 1 for base access
[    0.170242] PCI: Using configuration type 1 for extended access
[    0.170849] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.170858] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.170858] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.170858] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.170858] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.170858] ACPI: Added _OSI(Module Device)
[    0.170858] ACPI: Added _OSI(Processor Device)
[    0.170858] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.170858] ACPI: Added _OSI(Processor Aggregator Device)
[    0.196705] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.199626] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.206743] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.207897] ACPI: Interpreter enabled
[    0.207897] ACPI: PM: (supports S0 S3 S4 S5)
[    0.207897] ACPI: Using IOAPIC for interrupt routing
[    0.208684] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.208755] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource
[    0.208768] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.208770] PCI: Using E820 reservations for host bridge windows
[    0.209440] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.225966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.225973] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.226156] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
[    0.226493] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.226506] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.227278] PCI host bridge to bus 0000:00
[    0.227280] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.227283] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.227285] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.227289] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.227292] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.227294] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.227296] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.227299] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.227317] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.227434] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.227555] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.227626] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.227661] pci 0000:00:01.3: enabling Extended Tags
[    0.228159] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.228511] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.228590] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.228658] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.229190] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.229515] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.229601] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.229666] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.230009] pci 0000:00:07.1: enabling Extended Tags
[    0.230081] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.230394] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.230461] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.230492] pci 0000:00:08.1: enabling Extended Tags
[    0.230565] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.231335] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.231581] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.231838] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.231893] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.231944] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.231995] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.232046] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.232096] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.232148] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.232199] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.232362] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.232379] pci 0000:03:00.0: reg 0x10: [mem 0xf76a0000-0xf76a7fff 64bit]
[    0.232417] pci 0000:03:00.0: enabling Extended Tags
[    0.232473] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.232660] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.232704] pci 0000:03:00.1: reg 0x24: [mem 0xf7680000-0xf769ffff]
[    0.232712] pci 0000:03:00.1: reg 0x30: [mem 0xf7600000-0xf767ffff pref]
[    0.232719] pci 0000:03:00.1: enabling Extended Tags
[    0.232760] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.232876] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.232916] pci 0000:03:00.2: enabling Extended Tags
[    0.232962] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.233107] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.233111] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.233114] pci 0000:00:01.3:   bridge window [mem 0xf7500000-0xf76fffff]
[    0.233373] pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
[    0.233417] pci 0000:20:00.0: enabling Extended Tags
[    0.233478] pci 0000:20:00.0: PME# supported from D3hot D3cold
[    0.233626] pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
[    0.233670] pci 0000:20:01.0: enabling Extended Tags
[    0.233730] pci 0000:20:01.0: PME# supported from D3hot D3cold
[    0.233895] pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
[    0.233939] pci 0000:20:04.0: enabling Extended Tags
[    0.233999] pci 0000:20:04.0: PME# supported from D3hot D3cold
[    0.234154] pci 0000:03:00.2: PCI bridge to [bus 20-25]
[    0.234160] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.234164] pci 0000:03:00.2:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.234205] pci 0000:20:00.0: PCI bridge to [bus 21]
[    0.234282] pci 0000:22:00.0: [10ec:8168] type 00 class 0x020000
[    0.234309] pci 0000:22:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.234346] pci 0000:22:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit]
[    0.234370] pci 0000:22:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit]
[    0.234541] pci 0000:22:00.0: supports D1 D2
[    0.234543] pci 0000:22:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.234813] pci 0000:20:01.0: PCI bridge to [bus 22]
[    0.234819] pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
[    0.234823] pci 0000:20:01.0:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.234884] pci 0000:20:04.0: PCI bridge to [bus 25]
[    0.235184] pci 0000:26:00.0: [10de:2184] type 00 class 0x030000
[    0.235198] pci 0000:26:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.235210] pci 0000:26:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.235222] pci 0000:26:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.235230] pci 0000:26:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.235238] pci 0000:26:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.235259] pci 0000:26:00.0: BAR 3: assigned to efifb
[    0.235265] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.235312] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
[    0.235398] pci 0000:26:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.235519] pci 0000:26:00.1: [10de:1aeb] type 00 class 0x040300
[    0.235533] pci 0000:26:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.235693] pci 0000:26:00.2: [10de:1aec] type 00 class 0x0c0330
[    0.235711] pci 0000:26:00.2: reg 0x10: [mem 0xf2000000-0xf203ffff 64bit pref]
[    0.235729] pci 0000:26:00.2: reg 0x1c: [mem 0xf2040000-0xf204ffff 64bit pref]
[    0.235789] pci 0000:26:00.2: PME# supported from D0 D3hot D3cold
[    0.235872] pci 0000:26:00.3: [10de:1aed] type 00 class 0x0c8000
[    0.235886] pci 0000:26:00.3: reg 0x10: [mem 0xf7084000-0xf7084fff]
[    0.235970] pci 0000:26:00.3: PME# supported from D0 D3hot D3cold
[    0.236086] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.236090] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.236093] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.236097] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.236187] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[    0.236211] pci 0000:27:00.0: enabling Extended Tags
[    0.236318] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[    0.236331] pci 0000:27:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
[    0.236340] pci 0000:27:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
[    0.236347] pci 0000:27:00.2: enabling Extended Tags
[    0.236484] pci 0000:27:00.3: [1022:145f] type 00 class 0x0c0330
[    0.236495] pci 0000:27:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
[    0.236516] pci 0000:27:00.3: enabling Extended Tags
[    0.236550] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[    0.236690] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.236695] pci 0000:00:07.1:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.237193] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[    0.237219] pci 0000:28:00.0: enabling Extended Tags
[    0.237336] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[    0.237363] pci 0000:28:00.2: reg 0x24: [mem 0xf7708000-0xf7708fff]
[    0.237372] pci 0000:28:00.2: enabling Extended Tags
[    0.237407] pci 0000:28:00.2: PME# supported from D3hot D3cold
[    0.237521] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[    0.237529] pci 0000:28:00.3: reg 0x10: [mem 0xf7700000-0xf7707fff]
[    0.237550] pci 0000:28:00.3: enabling Extended Tags
[    0.237583] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.237708] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.237713] pci 0000:00:08.1:   bridge window [mem 0xf7700000-0xf77fffff]
[    0.238562] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.238660] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.238747] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.238851] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.238947] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.239026] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.239105] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.239184] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.240247] iommu: Default domain type: Translated
[    0.240247] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.240261] SCSI subsystem initialized
[    0.240276] libata version 3.00 loaded.
[    0.240276] ACPI: bus type USB registered
[    0.240276] usbcore: registered new interface driver usbfs
[    0.240276] usbcore: registered new interface driver hub
[    0.240276] usbcore: registered new device driver usb
[    0.240276] pps_core: LinuxPPS API ver. 1 registered
[    0.240276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.240276] PTP clock support registered
[    0.240276] EDAC MC: Ver: 3.0.0
[    0.243346] efivars: Registered efivars operations
[    0.243642] NetLabel: Initializing
[    0.243643] NetLabel:  domain hash size = 128
[    0.243644] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.243668] NetLabel:  unlabeled traffic allowed by default
[    0.243674] mctp: management component transport protocol core
[    0.243676] NET: Registered PF_MCTP protocol family
[    0.243681] PCI: Using ACPI for IRQ routing
[    0.245585] PCI: pci_cache_line_size set to 64 bytes
[    0.245585] e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff]
[    0.245585] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.245585] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.245585] e820: reserve RAM buffer [mem 0xd6004018-0xd7ffffff]
[    0.245585] e820: reserve RAM buffer [mem 0xd7276018-0xd7ffffff]
[    0.245585] e820: reserve RAM buffer [mem 0xd7323000-0xd7ffffff]
[    0.245585] e820: reserve RAM buffer [mem 0xd7450000-0xd7ffffff]
[    0.245585] e820: reserve RAM buffer [mem 0xdb62e000-0xdbffffff]
[    0.245585] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.245585] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.246707] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.246707] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.246707] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.246707] vgaarb: loaded
[    0.246758] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.246764] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.248884] clocksource: Switched to clocksource tsc-early
[    0.251129] VFS: Disk quotas dquot_6.6.0
[    0.251149] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.251239] pnp: PnP ACPI init
[    0.251363] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.251833] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.251836] system 00:02: [io  0x0a10-0x0a1f] has been reserved
[    0.251839] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.251841] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    0.252351] pnp 00:03: [dma 0 disabled]
[    0.252934] pnp 00:04: [dma 0 disabled]
[    0.253372] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.253375] system 00:05: [io  0x040b] has been reserved
[    0.253377] system 00:05: [io  0x04d6] has been reserved
[    0.253379] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.253382] system 00:05: [io  0x0c14] has been reserved
[    0.253384] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.253386] system 00:05: [io  0x0c52] has been reserved
[    0.253388] system 00:05: [io  0x0c6c] has been reserved
[    0.253390] system 00:05: [io  0x0c6f] has been reserved
[    0.253392] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.253395] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.253397] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.253399] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.253401] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.253403] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.253405] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.253408] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.253410] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.253412] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.253415] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.253417] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.253420] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.253423] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.253425] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.253428] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.253431] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.254185] pnp: PnP ACPI: found 6 devices
[    0.260528] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.260609] NET: Registered PF_INET protocol family
[    0.260860] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.263727] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.263762] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.263878] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.264178] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.264294] TCP: Hash tables configured (established 131072 bind 65536)
[    0.264452] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.264513] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.264565] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.264655] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.264665] NET: Registered PF_XDP protocol family
[    0.264683] pci 0000:20:00.0: PCI bridge to [bus 21]
[    0.264696] pci 0000:20:01.0: PCI bridge to [bus 22]
[    0.264699] pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
[    0.264704] pci 0000:20:01.0:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.264712] pci 0000:20:04.0: PCI bridge to [bus 25]
[    0.264722] pci 0000:03:00.2: PCI bridge to [bus 20-25]
[    0.264725] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.264729] pci 0000:03:00.2:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.264737] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.264739] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.264742] pci 0000:00:01.3:   bridge window [mem 0xf7500000-0xf76fffff]
[    0.264749] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.264751] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.264755] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.264758] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.264763] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.264766] pci 0000:00:07.1:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.264771] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.264775] pci 0000:00:08.1:   bridge window [mem 0xf7700000-0xf77fffff]
[    0.264781] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.264783] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.264785] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.264787] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.264789] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.264791] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
[    0.264793] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.264796] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.264797] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf76fffff]
[    0.264799] pci_bus 0000:20: resource 0 [io  0xf000-0xffff]
[    0.264801] pci_bus 0000:20: resource 1 [mem 0xf7500000-0xf75fffff]
[    0.264803] pci_bus 0000:22: resource 0 [io  0xf000-0xffff]
[    0.264805] pci_bus 0000:22: resource 1 [mem 0xf7500000-0xf75fffff]
[    0.264808] pci_bus 0000:26: resource 0 [io  0xe000-0xefff]
[    0.264809] pci_bus 0000:26: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.264811] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.264814] pci_bus 0000:27: resource 1 [mem 0xf7200000-0xf74fffff]
[    0.264816] pci_bus 0000:28: resource 1 [mem 0xf7700000-0xf77fffff]
[    0.265128] pci 0000:26:00.1: extending delay after power-on from D3hot to 20 msec
[    0.265161] pci 0000:26:00.1: D0 power state depends on 0000:26:00.0
[    0.265193] pci 0000:26:00.2: D0 power state depends on 0000:26:00.0
[    0.265335] pci 0000:26:00.3: D0 power state depends on 0000:26:00.0
[    0.265515] PCI: CLS 64 bytes, default 64
[    0.265527] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.265576] Trying to unpack rootfs image as initramfs...
[    0.265587] pci 0000:00:01.0: Adding to iommu group 0
[    0.265606] pci 0000:00:01.3: Adding to iommu group 1
[    0.265634] pci 0000:00:02.0: Adding to iommu group 2
[    0.265664] pci 0000:00:03.0: Adding to iommu group 3
[    0.265684] pci 0000:00:03.1: Adding to iommu group 4
[    0.265712] pci 0000:00:04.0: Adding to iommu group 5
[    0.265741] pci 0000:00:07.0: Adding to iommu group 6
[    0.265762] pci 0000:00:07.1: Adding to iommu group 7
[    0.265789] pci 0000:00:08.0: Adding to iommu group 8
[    0.265809] pci 0000:00:08.1: Adding to iommu group 9
[    0.265846] pci 0000:00:14.0: Adding to iommu group 10
[    0.265867] pci 0000:00:14.3: Adding to iommu group 10
[    0.265962] pci 0000:00:18.0: Adding to iommu group 11
[    0.265982] pci 0000:00:18.1: Adding to iommu group 11
[    0.266006] pci 0000:00:18.2: Adding to iommu group 11
[    0.266024] pci 0000:00:18.3: Adding to iommu group 11
[    0.266042] pci 0000:00:18.4: Adding to iommu group 11
[    0.266060] pci 0000:00:18.5: Adding to iommu group 11
[    0.266079] pci 0000:00:18.6: Adding to iommu group 11
[    0.266098] pci 0000:00:18.7: Adding to iommu group 11
[    0.266142] pci 0000:03:00.0: Adding to iommu group 12
[    0.266162] pci 0000:03:00.1: Adding to iommu group 12
[    0.266183] pci 0000:03:00.2: Adding to iommu group 12
[    0.266189] pci 0000:20:00.0: Adding to iommu group 12
[    0.266196] pci 0000:20:01.0: Adding to iommu group 12
[    0.266202] pci 0000:20:04.0: Adding to iommu group 12
[    0.266210] pci 0000:22:00.0: Adding to iommu group 12
[    0.266262] pci 0000:26:00.0: Adding to iommu group 13
[    0.266284] pci 0000:26:00.1: Adding to iommu group 13
[    0.266305] pci 0000:26:00.2: Adding to iommu group 13
[    0.266327] pci 0000:26:00.3: Adding to iommu group 13
[    0.266346] pci 0000:27:00.0: Adding to iommu group 14
[    0.266366] pci 0000:27:00.2: Adding to iommu group 15
[    0.266385] pci 0000:27:00.3: Adding to iommu group 16
[    0.266404] pci 0000:28:00.0: Adding to iommu group 17
[    0.266424] pci 0000:28:00.2: Adding to iommu group 18
[    0.266448] pci 0000:28:00.3: Adding to iommu group 19
[    0.271607] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.271614] AMD-Vi: Extended features (0xf77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC
[    0.271623] AMD-Vi: Interrupt remapping enabled
[    0.271788] AMD-Vi: Virtual APIC enabled
[    0.271797] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.271799] software IO TLB: mapped [mem 0x00000000d2004000-0x00000000d6004000] (64MB)
[    0.271895] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.275032] Initialise system trusted keyrings
[    0.275045] Key type blacklist registered
[    0.275101] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.275113] zbud: loaded
[    0.275328] integrity: Platform Keyring initialized
[    0.275331] integrity: Machine keyring initialized
[    0.284973] Key type asymmetric registered
[    0.284975] Asymmetric key parser 'x509' registered
[    0.284993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.285063] io scheduler mq-deadline registered
[    0.285065] io scheduler kyber registered
[    0.285080] io scheduler bfq registered
[    0.287369] pcieport 0000:00:01.3: AER: enabled with IRQ 26
[    0.287631] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[    0.288310] pcieport 0000:00:07.1: AER: enabled with IRQ 28
[    0.288650] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[    0.289349] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.289523] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.289550] ACPI: button: Power Button [PWRB]
[    0.289591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.290933] ACPI: button: Power Button [PWRF]
[    0.290983] Monitor-Mwait will be used to enter C-1 state
[    0.290994] ACPI: \_PR_.C000: Found 2 idle states
[    0.291144] ACPI: \_PR_.C002: Found 2 idle states
[    0.291253] ACPI: \_PR_.C004: Found 2 idle states
[    0.291389] ACPI: \_PR_.C006: Found 2 idle states
[    0.291514] ACPI: \_PR_.C008: Found 2 idle states
[    0.291607] ACPI: \_PR_.C00A: Found 2 idle states
[    0.291698] ACPI: \_PR_.C001: Found 2 idle states
[    0.291790] ACPI: \_PR_.C003: Found 2 idle states
[    0.291884] ACPI: \_PR_.C005: Found 2 idle states
[    0.291996] ACPI: \_PR_.C007: Found 2 idle states
[    0.292113] ACPI: \_PR_.C009: Found 2 idle states
[    0.292224] ACPI: \_PR_.C00B: Found 2 idle states
[    0.292519] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.292761] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.295617] Non-volatile memory driver v1.3
[    0.295619] Linux agpgart interface v0.103
[    0.295700] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    0.295732] ACPI: bus type drm_connector registered
[    0.296466] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.296921] fbcon: Deferring console take-over
[    0.296923] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.297846] ahci 0000:03:00.1: version 3.0
[    0.297986] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    0.298023] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.298026] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.298689] scsi host0: ahci
[    0.298822] scsi host1: ahci
[    0.298933] scsi host2: ahci
[    0.299042] scsi host3: ahci
[    0.299154] scsi host4: ahci
[    0.299257] scsi host5: ahci
[    0.299370] scsi host6: ahci
[    0.299487] scsi host7: ahci
[    0.299535] ata1: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680100 irq 36
[    0.299538] ata2: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680180 irq 36
[    0.299540] ata3: DUMMY
[    0.299541] ata4: DUMMY
[    0.299542] ata5: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680300 irq 36
[    0.299545] ata6: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680380 irq 36
[    0.299546] ata7: DUMMY
[    0.299547] ata8: DUMMY
[    0.299700] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.299704] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.299883] scsi host8: ahci
[    0.299932] ata9: SATA max UDMA/133 abar m4096@0xf7708000 port 0xf7708100 irq 38
[    0.300022] usbcore: registered new interface driver usbserial_generic
[    0.300027] usbserial: USB Serial support registered for generic
[    0.300088] rtc_cmos 00:01: RTC can wake from S4
[    0.300498] rtc_cmos 00:01: registered as rtc0
[    0.300560] rtc_cmos 00:01: setting system clock to 2023-11-10T12:15:56 UTC (1699618556)
[    0.300597] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.300640] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.300736] ledtrig-cpu: registered to indicate activity on CPUs
[    0.301017] hid: raw HID events driver (C) Jiri Kosina
[    0.301126] drop_monitor: Initializing network drop monitor service
[    0.314729] Initializing XFRM netlink socket
[    0.314771] NET: Registered PF_INET6 protocol family
[    0.316969] Freeing initrd memory: 9368K
[    0.322725] Segment Routing with IPv6
[    0.322727] RPL Segment Routing with IPv6
[    0.322737] In-situ OAM (IOAM) with IPv6
[    0.322764] NET: Registered PF_PACKET protocol family
[    0.323753] microcode: microcode updated early to new patch_level=0x0800820d
[    0.323797] microcode: CPU2: patch_level=0x0800820d
[    0.323797] microcode: CPU1: patch_level=0x0800820d
[    0.323797] microcode: CPU0: patch_level=0x0800820d
[    0.323798] microcode: CPU3: patch_level=0x0800820d
[    0.323798] microcode: CPU4: patch_level=0x0800820d
[    0.323800] microcode: CPU5: patch_level=0x0800820d
[    0.324297] microcode: CPU5: new patch_level=0x0800820d
[    0.324319] microcode: CPU4: new patch_level=0x0800820d
[    0.324320] microcode: CPU3: new patch_level=0x0800820d
[    0.324352] microcode: CPU9: patch_level=0x0800820d
[    0.324352] microcode: CPU10: patch_level=0x0800820d
[    0.324352] microcode: CPU11: patch_level=0x0800820d
[    0.324562] microcode: CPU6: patch_level=0x0800820d
[    0.324560] microcode: CPU2: new patch_level=0x0800820d
[    0.324564] microcode: CPU11: new patch_level=0x0800820d
[    0.324566] microcode: CPU9: new patch_level=0x0800820d
[    0.324582] microcode: CPU10: new patch_level=0x0800820d
[    0.324592] microcode: CPU8: patch_level=0x0800820d
[    0.324592] microcode: CPU7: patch_level=0x0800820d
[    0.324593] microcode: CPU1: new patch_level=0x0800820d
[    0.324759] microcode: CPU6: new patch_level=0x0800820d
[    0.324767] microcode: CPU0: new patch_level=0x0800820d
[    0.324781] microcode: CPU8: new patch_level=0x0800820d
[    0.324799] microcode: CPU7: new patch_level=0x0800820d
[    0.324810] microcode: Microcode Update Driver: v2.2.
[    0.324818] IPI shorthand broadcast: enabled
[    0.327505] sched_clock: Marking stable (353196225, -26661866)->(343246441, -16712082)
[    0.327675] registered taskstats version 1
[    0.328425] Loading compiled-in X.509 certificates
[    0.331372] Loaded X.509 cert 'Build time autogenerated kernel key: 75867b0fcb3a137e7101a6391d3e0cb71bd19afd'
[    0.336048] zswap: loaded using pool zstd/zsmalloc
[    0.338972] Key type .fscrypt registered
[    0.338975] Key type fscrypt-provisioning registered
[    0.341148] PM:   Magic number: 15:772:278
[    0.341201] tty tty15: hash matches
[    0.350087] RAS: Correctable Errors collector initialized.
[    0.350208] clk: Disabling unused clocks
[    0.616553] ata9: SATA link down (SStatus 0 SControl 300)
[    0.777609] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.805795] ata1.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[    0.814878] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.864538] ata1.00: configured for UDMA/133
[    0.864683] scsi 0:0:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[    0.865080] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    0.865084] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.865096] sd 0:0:0:0: [sda] Write Protect is off
[    0.865100] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.865119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.865146] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.914432]  sda: sda1 sda2
[    0.914528] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.280478] tsc: Refined TSC clocksource calibration: 3399.998 MHz
[    1.280494] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024cfe468, max_idle_ns: 440795307017 ns
[    1.280538] clocksource: Switched to clocksource tsc
[    1.337061] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.337161] ata2.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133
[    1.337190] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.337394] ata2.00: configured for UDMA/133
[    1.337556] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5
[    1.337870] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.337880] sd 1:0:0:0: [sdb] Write Protect is off
[    1.337882] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.337901] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.337922] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    1.342237]  sdb: sdb1 sdb2
[    1.342412] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.646906] ata5: SATA link down (SStatus 0 SControl 330)
[    2.113711] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.114424] ata6.00: supports DRM functions and may not be fully accessible
[    2.114427] ata6.00: ATA-10: CT500MX500SSD1, M3CR045, max UDMA/133
[    2.114455] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.115139] ata6.00: Features: Trust Dev-Sleep
[    2.115233] ata6.00: supports DRM functions and may not be fully accessible
[    2.115912] ata6.00: configured for UDMA/133
[    2.116320] scsi 5:0:0:0: Direct-Access     ATA      CT500MX500SSD1   045  PQ: 0 ANSI: 5
[    2.116669] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.116697] sd 5:0:0:0: [sdc] Write Protect is off
[    2.116700] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.116716] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.116752] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[    2.118450]  sdc: sdc1 sdc2
[    2.118642] sd 5:0:0:0: [sdc] supports TCG Opal
[    2.118644] sd 5:0:0:0: [sdc] Attached SCSI disk
[    2.119949] Freeing unused decrypted memory: 2028K
[    2.120480] Freeing unused kernel image (initmem) memory: 3404K
[    2.143740] Write protecting the kernel read-only data: 30720k
[    2.144313] Freeing unused kernel image (rodata/data gap) memory: 1272K
[    2.204695] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.204699] rodata_test: all tests were successful
[    2.204704] Run /init as init process
[    2.204706]   with arguments:
[    2.204708]     /init
[    2.204709]   with environment:
[    2.204710]     HOME=/
[    2.204711]     TERM=linux
[    2.265895] fbcon: Taking over console
[    2.268384] Console: switching to colour frame buffer device 128x48
[    2.416617] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.416631] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    2.471980] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    2.472485] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.472491] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.472496] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.472571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    2.472575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.472577] usb usb1: Product: xHCI Host Controller
[    2.472579] usb usb1: Manufacturer: Linux 6.6.1-arch1-1 xhci-hcd
[    2.472580] usb usb1: SerialNumber: 0000:03:00.0
[    2.472741] hub 1-0:1.0: USB hub found
[    2.472756] hub 1-0:1.0: 10 ports detected
[    2.473616] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.473645] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    2.473647] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.473649] usb usb2: Product: xHCI Host Controller
[    2.473651] usb usb2: Manufacturer: Linux 6.6.1-arch1-1 xhci-hcd
[    2.473653] usb usb2: SerialNumber: 0000:03:00.0
[    2.473750] hub 2-0:1.0: USB hub found
[    2.473759] hub 2-0:1.0: 4 ports detected
[    2.474481] xhci_hcd 0000:26:00.2: xHCI Host Controller
[    2.474486] xhci_hcd 0000:26:00.2: new USB bus registered, assigned bus number 3
[    2.475091] xhci_hcd 0000:26:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    2.475256] xhci_hcd 0000:26:00.2: xHCI Host Controller
[    2.475259] xhci_hcd 0000:26:00.2: new USB bus registered, assigned bus number 4
[    2.475262] xhci_hcd 0000:26:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    2.475311] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    2.475314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.475316] usb usb3: Product: xHCI Host Controller
[    2.475318] usb usb3: Manufacturer: Linux 6.6.1-arch1-1 xhci-hcd
[    2.475319] usb usb3: SerialNumber: 0000:26:00.2
[    2.475408] hub 3-0:1.0: USB hub found
[    2.475416] hub 3-0:1.0: 2 ports detected
[    2.475528] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.475555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    2.475557] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.475559] usb usb4: Product: xHCI Host Controller
[    2.475561] usb usb4: Manufacturer: Linux 6.6.1-arch1-1 xhci-hcd
[    2.475563] usb usb4: SerialNumber: 0000:26:00.2
[    2.475656] hub 4-0:1.0: USB hub found
[    2.475666] hub 4-0:1.0: 4 ports detected
[    2.475886] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    2.475891] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 5
[    2.475992] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    2.476359] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    2.476363] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 6
[    2.476366] xhci_hcd 0000:27:00.3: Host supports USB 3.0 SuperSpeed
[    2.476404] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    2.476406] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.476408] usb usb5: Product: xHCI Host Controller
[    2.476410] usb usb5: Manufacturer: Linux 6.6.1-arch1-1 xhci-hcd
[    2.476412] usb usb5: SerialNumber: 0000:27:00.3
[    2.476519] hub 5-0:1.0: USB hub found
[    2.476527] hub 5-0:1.0: 4 ports detected
[    2.476773] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.476802] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    2.476805] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.476807] usb usb6: Product: xHCI Host Controller
[    2.476808] usb usb6: Manufacturer: Linux 6.6.1-arch1-1 xhci-hcd
[    2.476810] usb usb6: SerialNumber: 0000:27:00.3
[    2.476908] hub 6-0:1.0: USB hub found
[    2.476917] hub 6-0:1.0: 4 ports detected
[    2.730038] usb 5-2: new low-speed USB device number 2 using xhci_hcd
[    2.790036] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    2.894755] EXT4-fs (sdb2): mounted filesystem 7f8d3b8f-4cb1-4609-a012-abfaa3417ae1 r/w with ordered data mode. Quota mode: none.
[    2.901469] usb 5-2: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00
[    2.901474] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.901477] usb 5-2: Product: USB OPTICAL MOUSE
[    3.040670] systemd[1]: systemd 254.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.040675] systemd[1]: Detected architecture x86-64.
[    3.042250] systemd[1]: Hostname set to <mybox>.
[    3.046682] usb 5-4: new low-speed USB device number 3 using xhci_hcd
[    3.207455] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[    3.220471] usb 5-4: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[    3.220475] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.220477] usb 5-4: Product: USB Keyboard
[    3.220479] usb 5-4: Manufacturer: SEM
[    3.229076] usb 1-4: New USB device found, idVendor=0b0e, idProduct=0300, bcdDevice= 4.03
[    3.229079] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.229081] usb 1-4: Product: Jabra EVOLVE 20 MS
[    3.229082] usb 1-4: Manufacturer: GN Netcom A/S
[    3.229084] usb 1-4: SerialNumber: A0011461CF360A
[    3.231278] usb 2-3: New USB device found, idVendor=0480, idProduct=0900, bcdDevice= 3.15
[    3.231282] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.231284] usb 2-3: Product: External USB 3.0
[    3.231286] usb 2-3: Manufacturer: TOSHIBA
[    3.231288] usb 2-3: SerialNumber: 20190622004076F
[    3.306192] systemd[1]: bpf-lsm: LSM BPF program attached
[    3.340193] systemd-fstab-generator[267]: Mount point  is not a valid path, ignoring.
[    3.340676] systemd-fstab-generator[267]: Mount point  is not a valid path, ignoring.
[    3.440186] systemd[1]: Queued start job for default target Graphical Interface.
[    3.461057] systemd[1]: Created slice Slice /system/getty.
[    3.461426] systemd[1]: Created slice Slice /system/modprobe.
[    3.461700] systemd[1]: Created slice User and Session Slice.
[    3.461795] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.461883] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.462077] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.462144] systemd[1]: Reached target Local Encrypted Volumes.
[    3.462187] systemd[1]: Reached target Login Prompts.
[    3.462227] systemd[1]: Reached target Local Integrity Protected Volumes.
[    3.462275] systemd[1]: Reached target Path Units.
[    3.462313] systemd[1]: Reached target Remote File Systems.
[    3.462353] systemd[1]: Reached target Slice Units.
[    3.462395] systemd[1]: Reached target Swaps.
[    3.462435] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.462524] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.462663] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.464199] systemd[1]: Listening on Process Core Dump Socket.
[    3.464362] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.464501] systemd[1]: Listening on Journal Socket.
[    3.464658] systemd[1]: Listening on udev Control Socket.
[    3.464780] systemd[1]: Listening on udev Kernel Socket.
[    3.465727] systemd[1]: Mounting Huge Pages File System...
[    3.466600] systemd[1]: Mounting POSIX Message Queue File System...
[    3.467923] systemd[1]: Mounting Kernel Debug File System...
[    3.470723] systemd[1]: Mounting Kernel Trace File System...
[    3.472411] systemd[1]: Mounting Temporary Directory /tmp...
[    3.473660] systemd[1]: Starting Create List of Static Device Nodes...
[    3.474524] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.475468] systemd[1]: Starting Load Kernel Module configfs...
[    3.476413] systemd[1]: Starting Load Kernel Module dm_mod...
[    3.477613] systemd[1]: Starting Load Kernel Module drm...
[    3.478537] systemd[1]: Starting Load Kernel Module fuse...
[    3.479468] systemd[1]: Starting Load Kernel Module loop...
[    3.479584] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    3.481318] systemd[1]: Starting Journal Service...
[    3.484242] systemd[1]: Starting Load Kernel Modules...
[    3.484811] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    3.486641] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.488121] loop: module loaded
[    3.488403] systemd[1]: Starting Coldplug All udev Devices...
[    3.491001] systemd[1]: Mounted Huge Pages File System.
[    3.491489] systemd[1]: Mounted POSIX Message Queue File System.
[    3.491895] systemd[1]: Mounted Kernel Debug File System.
[    3.492316] systemd[1]: Mounted Kernel Trace File System.
[    3.492690] systemd[1]: Mounted Temporary Directory /tmp.
[    3.495150] device-mapper: uevent: version 1.0.3
[    3.495156] EXT4-fs (sdb2): re-mounted 7f8d3b8f-4cb1-4609-a012-abfaa3417ae1 r/w. Quota mode: none.
[    3.495321] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    3.496462] fuse: init (API version 7.39)
[    3.501176] systemd-journald[289]: Collecting audit messages is disabled.
[    3.509099] i2c_dev: i2c /dev entries driver
[    3.516071] Asymmetric key parser 'pkcs8' registered
[    3.523594] systemd[1]: Finished Create List of Static Device Nodes.
[    3.526624] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.566811] systemd[1]: Finished Load Kernel Module configfs.
[    3.567325] systemd[1]: Started Journal Service.
[    3.829961] systemd-journald[289]: Received client request to flush runtime journal.
[    3.854514] systemd-journald[289]: /var/log/journal/d71023b58d99491fbdb8b76c131ecaea/system.journal: Journal file uses a different sequence number ID, rotating.
[    3.854520] systemd-journald[289]: Rotating system journal.
[    4.160749] parport_pc 00:03: reported by Plug and Play ACPI
[    4.163461] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    4.169163] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.169170] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.172858] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    4.193887] ccp 0000:27:00.2: enabling device (0000 -> 0002)
[    4.193919] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.194546] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.194646] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    4.196081] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    4.196644] acpi_cpufreq: overriding BIOS provided _PSD data
[    4.198491] ccp 0000:27:00.2: ccp enabled
[    4.198520] ccp 0000:27:00.2: psp enabled
[    4.201663] usb-storage 2-3:1.0: USB Mass Storage device detected
[    4.202468] scsi host9: usb-storage 2-3:1.0
[    4.205171] usbcore: registered new interface driver usb-storage
[    4.210569] usbcore: registered new interface driver uas
[    4.211704] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb5/5-2/5-2:1.0/0003:093A:2521.0001/input/input3
[    4.211785] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:27:00.3-2/input0
[    4.220112] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.220116] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.235753] r8169 0000:22:00.0 eth0: RTL8168h/8111h, 00:d8:61:a3:81:39, XID 541, IRQ 61
[    4.235758] r8169 0000:22:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.270121] cryptd: max_cpu_qlen set to 1000
[    4.271823] mc: Linux media interface: v0.10
[    4.282072] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb5/5-4/5-4:1.0/0003:1A2C:2124.0003/input/input4
[    4.293597] AVX2 version of gcm_enc/dec engaged.
[    4.293659] AES CTR mode by8 optimization enabled
[    4.296315] r8169 0000:22:00.0 enp34s0: renamed from eth0
[    4.297340] ppdev: user-space parallel port driver
[    4.336923] hid-generic 0003:1A2C:2124.0003: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:27:00.3-4/input0
[    4.346755] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb5/5-4/5-4:1.1/0003:1A2C:2124.0004/input/input5
[    4.365718] snd_hda_intel 0000:26:00.1: Disabling MSI
[    4.365734] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    4.365796] snd_hda_intel 0000:28:00.3: enabling device (0000 -> 0002)
[    4.391835] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input7
[    4.397207] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.397211] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.397214] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.397216] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.397218] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.397220] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.397222] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.397223] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.397225] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.403491] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb5/5-4/5-4:1.1/0003:1A2C:2124.0004/input/input6
[    4.403542] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input8
[    4.403600] hid-generic 0003:1A2C:2124.0004: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:27:00.3-4/input1
[    4.403659] usbcore: registered new interface driver usbhid
[    4.403661] usbhid: USB HID core driver
[    4.404302] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input9
[    4.404511] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input10
[    4.416778] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input11
[    4.416859] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input12
[    4.416926] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input13
[    4.416986] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input14
[    4.417046] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input15
[    4.417108] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input16
[    4.417187] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input17
[    4.609165] usbcore: registered new interface driver snd-usb-audio
[    4.712836] input: GN Netcom A/S Jabra EVOLVE 20 MS as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.3/0003:0B0E:0300.0002/input/input18
[    4.724377] kvm_amd: TSC scaling supported
[    4.724381] kvm_amd: Nested Virtualization enabled
[    4.724383] kvm_amd: Nested Paging enabled
[    4.724385] kvm_amd: SEV enabled (ASIDs 0 - 15)
[    4.724387] kvm_amd: SEV-ES enabled (ASIDs 0 - 4294967295)
[    4.724405] kvm_amd: Virtual VMLOAD VMSAVE supported
[    4.724406] kvm_amd: Virtual GIF supported
[    4.724407] kvm_amd: LBR virtualization supported
[    4.730991] Console: switching to colour dummy device 80x25
[    4.734908] MCE: In-kernel MCE decoding enabled.
[    4.770164] jabra 0003:0B0E:0300.0002: input,hiddev96,hidraw3: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20 MS] on usb-0000:03:00.0-4/input3
[    4.770184] mousedev: PS/2 mouse device common for all mice
[    4.773851] nouveau 0000:26:00.0: vgaarb: deactivate vga console
[    4.774005] nouveau 0000:26:00.0: NVIDIA TU116 (168000a1)
[    4.811191] intel_rapl_common: Found RAPL domain package
[    4.811196] intel_rapl_common: Found RAPL domain core
[    4.862398] nouveau 0000:26:00.0: bios: version 90.16.34.00.5a
[    4.871241] nouveau 0000:26:00.0: pmu: firmware unavailable
[    4.885911] nouveau 0000:26:00.0: fb: 6144 MiB GDDR5
[    4.906872] nouveau 0000:26:00.0: DRM: VRAM: 6144 MiB
[    4.906876] nouveau 0000:26:00.0: DRM: GART: 536870912 MiB
[    4.906878] nouveau 0000:26:00.0: DRM: BIT table 'A' not found
[    4.906880] nouveau 0000:26:00.0: DRM: BIT table 'L' not found
[    4.906882] nouveau 0000:26:00.0: DRM: TMDS table version 2.0
[    4.906884] nouveau 0000:26:00.0: DRM: DCB version 4.1
[    4.906886] nouveau 0000:26:00.0: DRM: DCB outp 00: 02800f66 04600020
[    4.906889] nouveau 0000:26:00.0: DRM: DCB outp 01: 02000f62 04620020
[    4.906891] nouveau 0000:26:00.0: DRM: DCB outp 03: 02011f52 00020010
[    4.906893] nouveau 0000:26:00.0: DRM: DCB outp 04: 01822f36 04600010
[    4.906895] nouveau 0000:26:00.0: DRM: DCB outp 05: 01022f32 04620010
[    4.906897] nouveau 0000:26:00.0: DRM: DCB outp 06: 01833f46 04600020
[    4.906899] nouveau 0000:26:00.0: DRM: DCB outp 07: 01033f42 04620020
[    4.906901] nouveau 0000:26:00.0: DRM: DCB conn 00: 00020046
[    4.906903] nouveau 0000:26:00.0: DRM: DCB conn 01: 00010161
[    4.906904] nouveau 0000:26:00.0: DRM: DCB conn 02: 00001246
[    4.906906] nouveau 0000:26:00.0: DRM: DCB conn 03: 00002346
[    4.907546] nouveau 0000:26:00.0: DRM: MM: using COPY for buffer copies
[    4.908887] snd_hda_intel 0000:26:00.1: bound 0000:26:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[    4.992377] [drm] Initialized nouveau 1.4.0 20120801 for 0000:26:00.0 on minor 0
[    5.123362] Generic FE-GE Realtek PHY r8169-0-2200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2200:00, irq=MAC)
[    5.228440] scsi 9:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
[    5.230249] sd 9:0:0:0: [sdd] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.230579] sd 9:0:0:0: [sdd] Write Protect is off
[    5.230582] sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00
[    5.230905] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.316931] r8169 0000:22:00.0 enp34s0: Link is Down
[    5.588101] fbcon: nouveaudrmfb (fb0) is primary device
[    5.754926]  sdd: sdd1 sdd2
[    5.755247] sd 9:0:0:0: [sdd] Attached SCSI disk
[    6.250512] Console: switching to colour frame buffer device 240x67
[    6.252063] nouveau 0000:26:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[    8.596851] r8169 0000:22:00.0 enp34s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   10.961911] sddm-greeter[519]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[   15.799959] systemd-journald[289]: /var/log/journal/d71023b58d99491fbdb8b76c131ecaea/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   18.120003] sched: RT throttling activated
[   54.531841] usb 1-4: USB disconnect, device number 2
[   59.107117] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[   59.543275] usb 1-4: New USB device found, idVendor=0b0e, idProduct=0300, bcdDevice= 4.03
[   59.543287] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   59.543292] usb 1-4: Product: Jabra EVOLVE 20 MS
[   59.543296] usb 1-4: Manufacturer: GN Netcom A/S
[   59.543300] usb 1-4: SerialNumber: A0011461CF360A
[   59.834073] input: GN Netcom A/S Jabra EVOLVE 20 MS as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.3/0003:0B0E:0300.0005/input/input19
[   59.890508] jabra 0003:0B0E:0300.0005: input,hiddev96,hidraw3: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20 MS] on usb-0000:03:00.0-4/input3
[   62.680048] usb 2-3: USB disconnect, device number 2
[   62.766722] sd 9:0:0:0: [sdd] Synchronizing SCSI cache
[   62.766796] sd 9:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   66.777063] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[   67.013404] usb 1-3: New USB device found, idVendor=0480, idProduct=0900, bcdDevice= 3.15
[   67.013418] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   67.013424] usb 1-3: Product: External USB 3.0
[   67.013429] usb 1-3: Manufacturer: TOSHIBA
[   67.013433] usb 1-3: SerialNumber: 20190622004076F
[   67.025559] usb-storage 1-3:1.0: USB Mass Storage device detected
[   67.025842] scsi host9: usb-storage 1-3:1.0
[   69.360335] usb 1-3: USB disconnect, device number 4
[   70.407112] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[   70.639861] usb 1-3: New USB device found, idVendor=0480, idProduct=0900, bcdDevice= 3.15
[   70.639873] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   70.639878] usb 1-3: Product: External USB 3.0
[   70.639883] usb 1-3: Manufacturer: TOSHIBA
[   70.639887] usb 1-3: SerialNumber: 20190622004076F
[   70.650032] usb-storage 1-3:1.0: USB Mass Storage device detected
[   70.650470] scsi host9: usb-storage 1-3:1.0
[   71.918378] scsi 9:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
[   71.920439] sd 9:0:0:0: [sdd] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB)
[   71.920814] sd 9:0:0:0: [sdd] Write Protect is off
[   71.920817] sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00
[   71.921189] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   71.975740]  sdd: sdd1 sdd2
[   71.975977] sd 9:0:0:0: [sdd] Attached SCSI disk
[   92.291639] ntfs3: Max link count 4000
[   92.291644] ntfs3: Enabled Linux POSIX ACLs support
[   92.291646] ntfs3: Read-only LZX/Xpress compression included
[  327.459024] usb 5-2: USB disconnect, device number 2
[  341.805949] usb 5-2: new low-speed USB device number 4 using xhci_hcd
[  341.949332] usb 5-2: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00
[  341.949346] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  341.949352] usb 5-2: Product: USB OPTICAL MOUSE
[  341.968289] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb5/5-2/5-2:1.0/0003:093A:2521.0006/input/input20
[  341.968577] hid-generic 0003:093A:2521.0006: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:27:00.3-2/input0
[ 1276.746916] usb 1-4: USB disconnect, device number 3
[ 1281.384484] usb 1-4: new full-speed USB device number 6 using xhci_hcd
[ 1282.031889] usb 1-4: New USB device found, idVendor=0b0e, idProduct=0300, bcdDevice= 4.03
[ 1282.031902] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1282.031908] usb 1-4: Product: Jabra EVOLVE 20 MS
[ 1282.031913] usb 1-4: Manufacturer: GN Netcom A/S
[ 1282.031917] usb 1-4: SerialNumber: A0011461CF360A
[ 1282.322787] input: GN Netcom A/S Jabra EVOLVE 20 MS as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.3/0003:0B0E:0300.0007/input/input21
[ 1282.378294] jabra 0003:0B0E:0300.0007: input,hiddev96,hidraw3: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20 MS] on usb-0000:03:00.0-4/input3

The speakers in question are theses: Tempest Gaming M8 2.0

Jabra EVOLVE 20 MS are the headsets.

Hope somebody can help me with this sad

Thank you very much.
Glenn

Last edited by glennec (2023-11-10 12:47:51)

Offline

#2 2023-11-10 12:50:36

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,234

Re: tempest gaming speakers not showing up in dmesg neither in lsusb

lsusb/dmesg are the first places where anything should show up. if they don't then alsa or pipewire or anything above that is irrelevant. Since lsusb should show up even if you had kernel version mismatches, make sure there's not a button or so to actually start/enable the speakers in the first place. Do they need external power, by chance?

Offline

#3 2023-11-10 12:51:58

glennec
Member
Registered: 2023-11-09
Posts: 3

Re: tempest gaming speakers not showing up in dmesg neither in lsusb

Already solved it installing:

util-linux

Greetings.

Offline

#4 2023-11-10 12:54:00

glennec
Member
Registered: 2023-11-09
Posts: 3

Re: tempest gaming speakers not showing up in dmesg neither in lsusb

V1del wrote:

lsusb/dmesg are the first places where anything should show up. if they don't then alsa or pipewire or anything above that is irrelevant. Since lsusb should show up even if you had kernel version mismatches, make sure there's not a button or so to actually start/enable the speakers in the first place. Do they need external power, by chance?

Just installed util-linux package and the already showed up in my GUI.

Thank you anyways V1del smile

Greetz

Offline

#5 2023-11-10 12:56:33

loqs
Member
Registered: 2014-03-06
Posts: 18,928

Re: tempest gaming speakers not showing up in dmesg neither in lsusb

How did you manage to install the base package without util-linux?  As the base package depends on systemd which depends on util-linux.

Offline

Pages: 1

Board footer

Powered by FluxBB