You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2023-11-27 23:26:47
- linuxsimpleton43
- Member
- Registered: 2022-03-24
- Posts: 32
X Server fails on startx
When I run startx my xserver fails and I have no clue why.
Xorg Log:
X.Org X Server 1.21.1.9
X Protocol Version 11, Revision 0
[ 1810.133] Current Operating System: Linux maincomputer 6.6.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 20 Nov 2023 23:18:21 +0000 x86_64
[ 1810.133] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=60cfd490-68c2-468f-8f82-1f7ca303d44b rw amd_pstate=guided msr.allow_writes=on rd.systemd.show_status=auto rd.udev.log_priority=3 vt.global_cursor_default=0
[ 1810.134]
[ 1810.136] Current version of pixman: 0.42.2
[ 1810.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1810.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1810.142] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 27 18:21:24 2023
[ 1810.144] (==) Using config file: "/etc/X11/xorg.conf"
[ 1810.145] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1810.146] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1810.146] (==) ServerLayout "Layout0"
[ 1810.146] (**) |-->Screen "Screen0" (0)
[ 1810.146] (**) | |-->Monitor "Monitor0"
[ 1810.146] (**) | |-->Device "Device0"
[ 1810.146] (**) |-->Input Device "Keyboard0"
[ 1810.146] (**) |-->Input Device "Mouse0"
[ 1810.146] (**) Option "MaxClients" "2048"
[ 1810.146] (==) Automatically adding devices
[ 1810.146] (==) Automatically enabling devices
[ 1810.146] (==) Automatically adding GPU devices
[ 1810.146] (==) Automatically binding GPU devices
[ 1810.146] (**) Max clients allowed: 2048, resource mask: 0x3ffff
[ 1810.146] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 1810.146] Entry deleted from font path.
[ 1810.146] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 1810.146] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1810.146] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1810.146] (WW) Disabling Keyboard0
[ 1810.146] (WW) Disabling Mouse0
[ 1810.146] (II) Module ABI versions:
[ 1810.146] X.Org ANSI C Emulation: 0.4
[ 1810.146] X.Org Video Driver: 25.2
[ 1810.146] X.Org XInput driver : 24.4
[ 1810.146] X.Org Server Extension : 10.0
[ 1810.147] (++) using VT number 1
[ 1810.149] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 1810.149] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1810.149] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/drm/card1
[ 1810.150] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 1810.150] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1810.150] (II) Platform probe for /sys/devices/platform/simple-framebuffer.0/drm/card0
[ 1810.150] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 1810.153] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1810.155] (--) PCI:*(9@0:0:0) 10de:1e84:1458:4001 rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 1810.155] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1810.155] (II) LoadModule: "glx"
[ 1810.155] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1810.156] (II) Module glx: vendor="X.Org Foundation"
[ 1810.156] compiled for 1.21.1.9, module version = 1.0.0
[ 1810.156] ABI class: X.Org Server Extension, version 10.0
[ 1810.156] (II) LoadModule: "nvidia"
[ 1810.156] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1810.157] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1810.157] compiled for 1.6.99.901, module version = 1.0.0
[ 1810.157] Module class: X.Org Video Driver
[ 1810.157] (II) NVIDIA dlloader X Driver 545.29.06 Thu Nov 16 01:52:34 UTC 2023
[ 1810.157] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1810.157] (II) systemd-logind: releasing fd for 226:1
[ 1810.157] (II) Loading sub module "fb"
[ 1810.157] (II) LoadModule: "fb"
[ 1810.157] (II) Module "fb" already built-in
[ 1810.157] (II) Loading sub module "wfb"
[ 1810.157] (II) LoadModule: "wfb"
[ 1810.157] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1810.157] (II) Module wfb: vendor="X.Org Foundation"
[ 1810.157] compiled for 1.21.1.9, module version = 1.0.0
[ 1810.157] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1810.157] (II) systemd-logind: releasing fd for 226:0
[ 1810.158] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1810.158] (==) NVIDIA(0): RGB weight 888
[ 1810.158] (==) NVIDIA(0): Default visual is TrueColor
[ 1810.158] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1810.158] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 1810.158] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "True"
[ 1810.158] (**) NVIDIA(0): Option "Coolbits" "28"
[ 1810.158] (**) NVIDIA(0): Enabling 2D acceleration
[ 1810.158] (II) Loading sub module "glxserver_nvidia"
[ 1810.158] (II) LoadModule: "glxserver_nvidia"
[ 1810.158] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 1810.168] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 1810.168] compiled for 1.6.99.901, module version = 1.0.0
[ 1810.168] Module class: X.Org Server Extension
[ 1810.168] (II) NVIDIA GLX Module 545.29.06 Thu Nov 16 01:55:23 UTC 2023
[ 1810.168] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 1810.753] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[ 1810.753] (--) NVIDIA(0): DFP-0
[ 1810.753] (--) NVIDIA(0): DFP-1
[ 1810.753] (--) NVIDIA(0): DFP-2
[ 1810.753] (--) NVIDIA(0): DFP-3 (boot)
[ 1810.753] (--) NVIDIA(0): DFP-4
[ 1810.753] (--) NVIDIA(0): DFP-5 (boot)
[ 1810.753] (--) NVIDIA(0): DFP-6
[ 1810.754] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 2070 SUPER (TU104-A) at
[ 1810.754] (II) NVIDIA(0): PCI:9:0:0 (GPU-0)
[ 1810.754] (--) NVIDIA(0): Memory: 8388608 kBytes
[ 1810.754] (--) NVIDIA(0): VideoBIOS: 90.04.86.00.d1
[ 1810.754] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1810.754] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 1810.754] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 1810.754] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 1810.754] (--) NVIDIA(GPU-0):
[ 1810.754] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 1810.754] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 1810.754] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 1810.754] (--) NVIDIA(GPU-0):
[ 1810.754] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 1810.754] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 1810.754] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 1810.754] (--) NVIDIA(GPU-0):
[ 1810.754] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): connected
[ 1810.754] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): Internal DisplayPort
[ 1810.754] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): 2660.0 MHz maximum pixel clock
[ 1810.754] (--) NVIDIA(GPU-0):
[ 1810.760] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 1810.760] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 1810.760] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 1810.760] (--) NVIDIA(GPU-0):
[ 1810.760] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): connected
[ 1810.760] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): Internal DisplayPort
[ 1810.760] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): 2660.0 MHz maximum pixel clock
[ 1810.760] (--) NVIDIA(GPU-0):
[ 1810.762] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 1810.762] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 1810.762] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 1810.762] (--) NVIDIA(GPU-0):
[ 1810.862] (==) NVIDIA(0):
[ 1810.862] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 1810.862] (==) NVIDIA(0): will be used as the requested mode.
[ 1810.862] (==) NVIDIA(0):
[ 1810.863] (II) NVIDIA(0): Validated MetaModes:
[ 1810.863] (II) NVIDIA(0): "DFP-3:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 1810.863] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 1810.913] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 1810.913] (--) NVIDIA(0): option
[ 1810.913] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 1810.913] (II) NVIDIA: access.
[ 1810.918] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1810.918] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1810.918] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1810.918] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1810.918] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1810.918] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1810.918] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1810.918] (II) NVIDIA(0): Config Options in the README.
[ 1810.932] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 1811.094] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1811.094] (==) NVIDIA(0): Backing store enabled
[ 1811.094] (==) NVIDIA(0): Silken mouse enabled
[ 1811.094] (**) NVIDIA(0): DPMS enabled
[ 1811.094] (II) Loading sub module "dri2"
[ 1811.094] (II) LoadModule: "dri2"
[ 1811.094] (II) Module "dri2" already built-in
[ 1811.094] (II) NVIDIA(0): [DRI2] Setup complete
[ 1811.094] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1811.095] (II) Initializing extension Generic Event Extension
[ 1811.095] (II) Initializing extension SHAPE
[ 1811.095] (II) Initializing extension MIT-SHM
[ 1811.095] (II) Initializing extension XInputExtension
[ 1811.095] (II) Initializing extension XTEST
[ 1811.095] (II) Initializing extension BIG-REQUESTS
[ 1811.095] (II) Initializing extension SYNC
[ 1811.095] (II) Initializing extension XKEYBOARD
[ 1811.095] (II) Initializing extension XC-MISC
[ 1811.095] (II) Initializing extension SECURITY
[ 1811.095] (II) Initializing extension XFIXES
[ 1811.095] (II) Initializing extension RENDER
[ 1811.095] (II) Initializing extension RANDR
[ 1811.095] (II) Initializing extension COMPOSITE
[ 1811.095] (II) Initializing extension DAMAGE
[ 1811.095] (II) Initializing extension MIT-SCREEN-SAVER
[ 1811.095] (II) Initializing extension DOUBLE-BUFFER
[ 1811.095] (II) Initializing extension RECORD
[ 1811.096] (II) Initializing extension DPMS
[ 1811.096] (II) Initializing extension Present
[ 1811.096] (II) Initializing extension DRI3
[ 1811.096] (II) Initializing extension X-Resource
[ 1811.096] (II) Initializing extension XVideo
[ 1811.096] (II) Initializing extension XVideo-MotionCompensation
[ 1811.096] (II) Initializing extension GLX
[ 1811.096] (II) Initializing extension GLX
[ 1811.096] (II) Indirect GLX disabled.
[ 1811.096] (II) GLX: Another vendor is already registered for screen 0
[ 1811.096] (II) Initializing extension XFree86-VidModeExtension
[ 1811.096] (II) Initializing extension XFree86-DGA
[ 1811.096] (II) Initializing extension XFree86-DRI
[ 1811.096] (II) Initializing extension DRI2
[ 1811.096] (II) Initializing extension NV-GLX
[ 1811.096] (II) Initializing extension NV-CONTROL
[ 1811.097] (II) Initializing extension XINERAMA
[ 1811.156] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1811.156] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1811.156] (II) LoadModule: "libinput"
[ 1811.156] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1811.157] (II) Module libinput: vendor="X.Org Foundation"
[ 1811.157] compiled for 1.21.1.8, module version = 1.4.0
[ 1811.157] Module class: X.Org XInput Driver
[ 1811.157] ABI class: X.Org XInput driver, version 24.4
[ 1811.157] (II) Using input driver 'libinput' for 'Power Button'
[ 1811.157] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[ 1811.157] (**) Power Button: always reports core events
[ 1811.157] (**) Option "Device" "/dev/input/event1"
[ 1811.159] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 1811.159] (II) event1 - Power Button: device is a keyboard
[ 1811.159] (II) event1 - Power Button: device removed
[ 1811.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 1811.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1811.160] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 1811.160] (II) event1 - Power Button: device is a keyboard
[ 1811.160] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1811.160] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1811.160] (II) Using input driver 'libinput' for 'Power Button'
[ 1811.161] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 44 paused 0
[ 1811.161] (**) Power Button: always reports core events
[ 1811.161] (**) Option "Device" "/dev/input/event0"
[ 1811.161] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 1811.161] (II) event0 - Power Button: device is a keyboard
[ 1811.162] (II) event0 - Power Button: device removed
[ 1811.162] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 1811.162] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1811.162] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 1811.162] (II) event0 - Power Button: device is a keyboard
[ 1811.163] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 1811.163] (II) No input driver specified, ignoring this device.
[ 1811.163] (II) This device may have been added with another device file.
[ 1811.163] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 1811.163] (II) No input driver specified, ignoring this device.
[ 1811.163] (II) This device may have been added with another device file.
[ 1811.163] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1811.163] (II) No input driver specified, ignoring this device.
[ 1811.163] (II) This device may have been added with another device file.
[ 1811.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[ 1811.164] (II) No input driver specified, ignoring this device.
[ 1811.164] (II) This device may have been added with another device file.
[ 1811.164] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard (/dev/input/event3)
[ 1811.164] (**) BY Tech Usb Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1811.164] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard'
[ 1811.165] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 45 paused 0
[ 1811.165] (**) BY Tech Usb Gaming Keyboard: always reports core events
[ 1811.165] (**) Option "Device" "/dev/input/event3"
[ 1811.166] (II) event3 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 1811.166] (II) event3 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 1811.166] (II) event3 - BY Tech Usb Gaming Keyboard: device removed
[ 1811.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.0/0003:258A:002A.0002/input/input3/event3"
[ 1811.166] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard" (type: KEYBOARD, id 8)
[ 1811.167] (II) event3 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 1811.167] (II) event3 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 1811.168] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard System Control (/dev/input/event5)
[ 1811.168] (**) BY Tech Usb Gaming Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 1811.168] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard System Control'
[ 1811.169] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 46 paused 0
[ 1811.169] (**) BY Tech Usb Gaming Keyboard System Control: always reports core events
[ 1811.169] (**) Option "Device" "/dev/input/event5"
[ 1811.170] (II) event5 - BY Tech Usb Gaming Keyboard System Control: is tagged by udev as: Keyboard
[ 1811.170] (II) event5 - BY Tech Usb Gaming Keyboard System Control: device is a keyboard
[ 1811.170] (II) event5 - BY Tech Usb Gaming Keyboard System Control: device removed
[ 1811.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input5/event5"
[ 1811.170] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard System Control" (type: KEYBOARD, id 9)
[ 1811.172] (II) event5 - BY Tech Usb Gaming Keyboard System Control: is tagged by udev as: Keyboard
[ 1811.172] (II) event5 - BY Tech Usb Gaming Keyboard System Control: device is a keyboard
[ 1811.172] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Consumer Control (/dev/input/event6)
[ 1811.172] (**) BY Tech Usb Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1811.172] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Consumer Control'
[ 1811.173] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 47 paused 0
[ 1811.173] (**) BY Tech Usb Gaming Keyboard Consumer Control: always reports core events
[ 1811.173] (**) Option "Device" "/dev/input/event6"
[ 1811.174] (II) event6 - BY Tech Usb Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 1811.174] (II) event6 - BY Tech Usb Gaming Keyboard Consumer Control: device is a keyboard
[ 1811.174] (II) event6 - BY Tech Usb Gaming Keyboard Consumer Control: device removed
[ 1811.174] (II) libinput: BY Tech Usb Gaming Keyboard Consumer Control: needs a virtual subdevice
[ 1811.174] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input6/event6"
[ 1811.174] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Consumer Control" (type: MOUSE, id 10)
[ 1811.174] (**) Option "AccelerationScheme" "none"
[ 1811.174] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[ 1811.174] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 1811.174] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 1811.176] (II) event6 - BY Tech Usb Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 1811.176] (II) event6 - BY Tech Usb Gaming Keyboard Consumer Control: device is a keyboard
[ 1811.176] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard (/dev/input/event7)
[ 1811.176] (**) BY Tech Usb Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1811.176] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard'
[ 1811.177] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 48 paused 0
[ 1811.177] (**) BY Tech Usb Gaming Keyboard: always reports core events
[ 1811.177] (**) Option "Device" "/dev/input/event7"
[ 1811.178] (II) event7 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 1811.178] (II) event7 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 1811.178] (II) event7 - BY Tech Usb Gaming Keyboard: device removed
[ 1811.178] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input8/event7"
[ 1811.178] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard" (type: KEYBOARD, id 11)
[ 1811.180] (II) event7 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 1811.180] (II) event7 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 1811.181] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Mouse (/dev/input/event8)
[ 1811.181] (**) BY Tech Usb Gaming Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[ 1811.181] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Mouse'
[ 1811.181] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 49 paused 0
[ 1811.181] (**) BY Tech Usb Gaming Keyboard Mouse: always reports core events
[ 1811.181] (**) Option "Device" "/dev/input/event8"
[ 1811.182] (II) event8 - BY Tech Usb Gaming Keyboard Mouse: is tagged by udev as: Mouse
[ 1811.182] (II) event8 - BY Tech Usb Gaming Keyboard Mouse: device is a pointer
[ 1811.182] (II) event8 - BY Tech Usb Gaming Keyboard Mouse: device removed
[ 1811.182] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.182] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.182] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.182] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input9/event8"
[ 1811.182] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Mouse" (type: MOUSE, id 12)
[ 1811.183] (**) Option "AccelerationScheme" "none"
[ 1811.183] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) selected scheme none/0
[ 1811.183] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) acceleration factor: 2.000
[ 1811.183] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) acceleration threshold: 4
[ 1811.184] (II) event8 - BY Tech Usb Gaming Keyboard Mouse: is tagged by udev as: Mouse
[ 1811.184] (II) event8 - BY Tech Usb Gaming Keyboard Mouse: device is a pointer
[ 1811.185] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Mouse (/dev/input/mouse0)
[ 1811.185] (II) No input driver specified, ignoring this device.
[ 1811.185] (II) This device may have been added with another device file.
[ 1811.185] (II) config/udev: Adding input device C-Media Electronics Inc. USB Advanced Audio Device Consumer Control (/dev/input/event9)
[ 1811.185] (**) C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1811.185] (II) Using input driver 'libinput' for 'C-Media Electronics Inc. USB Advanced Audio Device Consumer Control'
[ 1811.186] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 50 paused 0
[ 1811.186] (**) C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: always reports core events
[ 1811.186] (**) Option "Device" "/dev/input/event9"
[ 1811.187] (II) event9 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: is tagged by udev as: Keyboard
[ 1811.187] (II) event9 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: device is a keyboard
[ 1811.187] (II) event9 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: device removed
[ 1811.187] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.2/7-3.2:1.3/0003:0D8C:016C.0004/input/input10/event9"
[ 1811.187] (II) XINPUT: Adding extended input device "C-Media Electronics Inc. USB Advanced Audio Device Consumer Control" (type: KEYBOARD, id 13)
[ 1811.188] (II) event9 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: is tagged by udev as: Keyboard
[ 1811.188] (II) event9 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: device is a keyboard
[ 1811.189] (II) config/udev: Adding input device Logitech MX Master (/dev/input/event10)
[ 1811.189] (**) Logitech MX Master: Applying InputClass "libinput pointer catchall"
[ 1811.189] (**) Logitech MX Master: Applying InputClass "libinput keyboard catchall"
[ 1811.189] (II) Using input driver 'libinput' for 'Logitech MX Master'
[ 1811.190] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 51 paused 0
[ 1811.190] (**) Logitech MX Master: always reports core events
[ 1811.190] (**) Option "Device" "/dev/input/event10"
[ 1811.191] (II) event10 - Logitech MX Master: is tagged by udev as: Keyboard Mouse
[ 1811.192] (II) event10 - Logitech MX Master: device is a pointer
[ 1811.192] (II) event10 - Logitech MX Master: device is a keyboard
[ 1811.192] (II) event10 - Logitech MX Master: device removed
[ 1811.192] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.192] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.192] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.192] (II) libinput: Logitech MX Master: needs a virtual subdevice
[ 1811.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input33/event10"
[ 1811.192] (II) XINPUT: Adding extended input device "Logitech MX Master" (type: MOUSE, id 14)
[ 1811.192] (**) Option "AccelerationScheme" "none"
[ 1811.192] (**) Logitech MX Master: (accel) selected scheme none/0
[ 1811.192] (**) Logitech MX Master: (accel) acceleration factor: 2.000
[ 1811.192] (**) Logitech MX Master: (accel) acceleration threshold: 4
[ 1811.193] (II) event10 - Logitech MX Master: is tagged by udev as: Keyboard Mouse
[ 1811.193] (II) event10 - Logitech MX Master: device is a pointer
[ 1811.193] (II) event10 - Logitech MX Master: device is a keyboard
[ 1811.194] (II) config/udev: Adding input device Logitech MX Master (/dev/input/mouse1)
[ 1811.194] (II) No input driver specified, ignoring this device.
[ 1811.194] (II) This device may have been added with another device file.
[ 1811.195] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event18)
[ 1811.195] (II) No input driver specified, ignoring this device.
[ 1811.195] (II) This device may have been added with another device file.
[ 1811.195] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event19)
[ 1811.195] (II) No input driver specified, ignoring this device.
[ 1811.195] (II) This device may have been added with another device file.
[ 1811.195] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event20)
[ 1811.195] (II) No input driver specified, ignoring this device.
[ 1811.195] (II) This device may have been added with another device file.
[ 1811.195] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event21)
[ 1811.195] (II) No input driver specified, ignoring this device.
[ 1811.195] (II) This device may have been added with another device file.
[ 1811.196] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event22)
[ 1811.196] (II) No input driver specified, ignoring this device.
[ 1811.196] (II) This device may have been added with another device file.
[ 1811.196] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event23)
[ 1811.196] (II) No input driver specified, ignoring this device.
[ 1811.196] (II) This device may have been added with another device file.
[ 1811.196] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event24)
[ 1811.196] (II) No input driver specified, ignoring this device.
[ 1811.196] (II) This device may have been added with another device file.
[ 1811.197] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 1811.197] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 1811.197] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 1811.197] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 52 paused 0
[ 1811.197] (**) Eee PC WMI hotkeys: always reports core events
[ 1811.197] (**) Option "Device" "/dev/input/event4"
[ 1811.198] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 1811.198] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 1811.198] (II) event4 - Eee PC WMI hotkeys: device removed
[ 1811.198] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[ 1811.198] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
[ 1811.198] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 1811.198] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 1811.199] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 1811.199] (II) No input driver specified, ignoring this device.
[ 1811.199] (II) This device may have been added with another device file.
[ 1811.201] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event11)
[ 1811.201] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[ 1811.201] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[ 1811.201] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 53 paused 0
[ 1811.201] (**) LogiOps Virtual Input: always reports core events
[ 1811.201] (**) Option "Device" "/dev/input/event11"
[ 1811.202] (II) event11 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[ 1811.202] (II) event11 - LogiOps Virtual Input: device is a keyboard
[ 1811.202] (II) event11 - LogiOps Virtual Input: device removed
[ 1811.202] (**) Option "config_info" "udev:/sys/devices/virtual/input/input34/event11"
[ 1811.202] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 16)
[ 1811.202] (II) event11 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[ 1811.202] (II) event11 - LogiOps Virtual Input: device is a keyboard
[ 1811.206] (**) BY Tech Usb Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1811.206] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Consumer Control'
[ 1811.206] (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
[ 1811.206] (**) BY Tech Usb Gaming Keyboard Consumer Control: always reports core events
[ 1811.206] (**) Option "Device" "/dev/input/event6"
[ 1811.206] (II) libinput: BY Tech Usb Gaming Keyboard Consumer Control: is a virtual subdevice
[ 1811.206] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input6/event6"
[ 1811.206] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Consumer Control" (type: KEYBOARD, id 17)
[ 1811.206] (**) Logitech MX Master: Applying InputClass "libinput pointer catchall"
[ 1811.206] (**) Logitech MX Master: Applying InputClass "libinput keyboard catchall"
[ 1811.206] (II) Using input driver 'libinput' for 'Logitech MX Master'
[ 1811.206] (II) systemd-logind: returning pre-existing fd for /dev/input/event10 13:74
[ 1811.206] (**) Logitech MX Master: always reports core events
[ 1811.206] (**) Option "Device" "/dev/input/event10"
[ 1811.206] (II) libinput: Logitech MX Master: is a virtual subdevice
[ 1811.206] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.206] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.206] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 1811.206] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input33/event10"
[ 1811.206] (II) XINPUT: Adding extended input device "Logitech MX Master" (type: KEYBOARD, id 18)
[ 1812.900] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 1812.900] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 1812.900] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 1812.900] (--) NVIDIA(GPU-0):
[ 1812.900] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 1812.900] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 1812.900] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 1812.900] (--) NVIDIA(GPU-0):
[ 1812.900] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 1812.900] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 1812.900] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 1812.900] (--) NVIDIA(GPU-0):
[ 1812.900] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): connected
[ 1812.900] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): Internal DisplayPort
[ 1812.900] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): 2660.0 MHz maximum pixel clock
[ 1812.900] (--) NVIDIA(GPU-0):
[ 1812.906] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 1812.906] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 1812.906] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 1812.906] (--) NVIDIA(GPU-0):
[ 1812.907] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): connected
[ 1812.907] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): Internal DisplayPort
[ 1812.907] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): 2660.0 MHz maximum pixel clock
[ 1812.907] (--) NVIDIA(GPU-0):
[ 1812.909] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 1812.909] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 1812.909] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 1812.909] (--) NVIDIA(GPU-0):
[ 1854.379] (EE)
[ 1854.379] (EE) Backtrace:
[ 1854.379] (EE) 0: /usr/lib/Xorg (dri3_send_open_reply+0xdd) [0x5559387d140d]
[ 1854.380] (EE) 1: /usr/lib64/libc.so.6 (__sigaction+0x50) [0x7fcd592d4710]
[ 1854.380] (EE) 2: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x7db09) [0x7fcd57ee96c9]
[ 1854.380] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x8548b) [0x7fcd57ef104b]
[ 1854.380] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x85369) [0x7fcd57ef0f29]
[ 1854.380] (EE) 5: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x6c51a) [0x7fcd57ed80da]
[ 1854.381] (EE) 6: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x43f2ec) [0x7fcd582aaeac]
[ 1854.381] (EE) 7: ? (?+0x0) [0x0]
[ 1854.381] (EE) unw_step failed: unspecified (general) error [-1]
[ 1854.381] (EE)
[ 1854.381] (EE) Segmentation fault at address 0x10
[ 1854.381] (EE)
Fatal server error:
[ 1854.381] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1854.381] (EE)
[ 1854.381] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1854.381] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1854.381] (EE)
[ 1854.565] (EE) Server terminated with error (1). Closing log file.Dmesg output:
[ 0.000000] Linux version 6.6.2-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Mon, 20 Nov 2023 23:18:21 +0000
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=60cfd490-68c2-468f-8f82-1f7ca303d44b rw amd_pstate=guided msr.allow_writes=on rd.systemd.show_status=auto rd.udev.log_priority=3 vt.global_cursor_default=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a211000-0x00000000c327ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3280000-0x00000000c3280fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3281000-0x00000000ca244fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca245000-0x00000000ca5a8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca5a9000-0x00000000ca6f8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ca6f9000-0x00000000caae5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000caae6000-0x00000000cb9fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cb9ff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000082f380000-0x000000082fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xb9173018-0xb9181067] usable ==> usable
[ 0.000000] e820: update [mem 0xb9173018-0xb9181067] usable ==> usable
[ 0.000000] e820: update [mem 0xb9153018-0xb9172e57] usable ==> usable
[ 0.000000] e820: update [mem 0xb9153018-0xb9172e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a211000-0x00000000b9153017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9153018-0x00000000b9172e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9172e58-0x00000000b9173017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9173018-0x00000000b9181067] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9181068-0x00000000c327ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c3280000-0x00000000c3280fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c3281000-0x00000000ca244fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca245000-0x00000000ca5a8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ca5a9000-0x00000000ca6f8fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000ca6f9000-0x00000000caae5fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000caae6000-0x00000000cb9fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cb9ff000-0x00000000ccffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000082f37ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000082f380000-0x000000082fffffff] reserved
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI=0xca6f8000 ACPI 2.0=0xca6f8014 TPMFinalLog=0xcaa99000 SMBIOS=0xcb7f0000 SMBIOS 3.0=0xcb7ef000 MEMATTR=0xc6df7018 ESRT=0xc8d1e118 INITRD=0xc1851a18 RNG=0xca6dec18 TPMEventLog=0xb9182018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem82: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ 0.000000] efi: Remove mem83: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] reserved
[ 0.000000] efi: Remove mem84: MMIO range=[0xfd400000-0xfd5fffff] (2MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd400000-0xfd5fffff] reserved
[ 0.000000] efi: Not removing mem85: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem86: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem87: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem88: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem89: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem90: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem91: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem92: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem93: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/TUF GAMING X570-PLUS (WI-FI), BIOS 5003 10/07/2023
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3599.844 MHz processor
[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000017] last_pfn = 0x82f380 max_arch_pfn = 0x400000000
[ 0.000023] total RAM covered: 3327M
[ 0.000181] Found optimal setting for mtrr clean up
[ 0.000181] gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
[ 0.000184] MTRR map: 8 entries (4 fixed + 4 variable; max 21), built from 9 variable MTRRs
[ 0.000186] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000465] e820: update [mem 0xca7d0000-0xca7dffff] usable ==> reserved
[ 0.000469] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000472] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.003702] esrt: Reserving ESRT space from 0x00000000c8d1e118 to 0x00000000c8d1e150.
[ 0.003706] e820: update [mem 0xc8d1e000-0xc8d1efff] usable ==> reserved
[ 0.003722] Using GB pages for direct mapping
[ 0.004619] Secure boot disabled
[ 0.004620] RAMDISK: [mem 0xb9d92000-0xba94ffff]
[ 0.004624] ACPI: Early table checksum verification disabled
[ 0.004626] ACPI: RSDP 0x00000000CA6F8014 000024 (v02 ALASKA)
[ 0.004629] ACPI: XSDT 0x00000000CA6F7728 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.004633] ACPI: FACP 0x00000000CA6F0000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.004637] ACPI: DSDT 0x00000000CA6E4000 00B87E (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.004639] ACPI: FACS 0x00000000CAAC9000 000040
[ 0.004640] ACPI: SSDT 0x00000000CA6F6000 00092A (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.004642] ACPI: SSDT 0x00000000CA6F2000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
[ 0.004644] ACPI: SSDT 0x00000000CA6F1000 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.004646] ACPI: FIDT 0x00000000CA6E3000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.004648] ACPI: FPDT 0x00000000CA5EC000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.004650] ACPI: MCFG 0x00000000CA6E1000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.004652] ACPI: HPET 0x00000000CA6E0000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.004654] ACPI: SSDT 0x00000000CA6DF000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.004656] ACPI: IVRS 0x00000000CA6DD000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.004657] ACPI: BGRT 0x00000000CA6DC000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.004659] ACPI: WPBT 0x00000000CA5FD000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.004661] ACPI: TPM2 0x00000000CA5FC000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.004663] ACPI: PCCT 0x00000000CA5FB000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.004665] ACPI: SSDT 0x00000000CA5F6000 004043 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.004667] ACPI: CRAT 0x00000000CA5F5000 000F50 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.004669] ACPI: CDIT 0x00000000CA5F4000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.004671] ACPI: SSDT 0x00000000CA5F3000 000259 (v02 AMD QOGIRDGP 00000001 INTL 20120913)
[ 0.004673] ACPI: SSDT 0x00000000CA5EF000 003E6E (v02 AMD QOGIRN 00000001 INTL 20120913)
[ 0.004674] ACPI: WSMT 0x00000000CA5EE000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.004676] ACPI: APIC 0x00000000CA5ED000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.004678] ACPI: Reserving FACP table memory at [mem 0xca6f0000-0xca6f0113]
[ 0.004679] ACPI: Reserving DSDT table memory at [mem 0xca6e4000-0xca6ef87d]
[ 0.004680] ACPI: Reserving FACS table memory at [mem 0xcaac9000-0xcaac903f]
[ 0.004680] ACPI: Reserving SSDT table memory at [mem 0xca6f6000-0xca6f6929]
[ 0.004681] ACPI: Reserving SSDT table memory at [mem 0xca6f2000-0xca6f5b8d]
[ 0.004681] ACPI: Reserving SSDT table memory at [mem 0xca6f1000-0xca6f10fb]
[ 0.004682] ACPI: Reserving FIDT table memory at [mem 0xca6e3000-0xca6e309b]
[ 0.004682] ACPI: Reserving FPDT table memory at [mem 0xca5ec000-0xca5ec043]
[ 0.004683] ACPI: Reserving MCFG table memory at [mem 0xca6e1000-0xca6e103b]
[ 0.004683] ACPI: Reserving HPET table memory at [mem 0xca6e0000-0xca6e0037]
[ 0.004684] ACPI: Reserving SSDT table memory at [mem 0xca6df000-0xca6df023]
[ 0.004684] ACPI: Reserving IVRS table memory at [mem 0xca6dd000-0xca6dd0cf]
[ 0.004685] ACPI: Reserving BGRT table memory at [mem 0xca6dc000-0xca6dc037]
[ 0.004686] ACPI: Reserving WPBT table memory at [mem 0xca5fd000-0xca5fd03b]
[ 0.004686] ACPI: Reserving TPM2 table memory at [mem 0xca5fc000-0xca5fc04b]
[ 0.004687] ACPI: Reserving PCCT table memory at [mem 0xca5fb000-0xca5fb06d]
[ 0.004687] ACPI: Reserving SSDT table memory at [mem 0xca5f6000-0xca5fa042]
[ 0.004688] ACPI: Reserving CRAT table memory at [mem 0xca5f5000-0xca5f5f4f]
[ 0.004688] ACPI: Reserving CDIT table memory at [mem 0xca5f4000-0xca5f4028]
[ 0.004689] ACPI: Reserving SSDT table memory at [mem 0xca5f3000-0xca5f3258]
[ 0.004689] ACPI: Reserving SSDT table memory at [mem 0xca5ef000-0xca5f2e6d]
[ 0.004690] ACPI: Reserving WSMT table memory at [mem 0xca5ee000-0xca5ee027]
[ 0.004690] ACPI: Reserving APIC table memory at [mem 0xca5ed000-0xca5ed15d]
[ 0.004737] No NUMA configuration found
[ 0.004738] Faking a node at [mem 0x0000000000000000-0x000000082f37ffff]
[ 0.004740] NODE_DATA(0) allocated [mem 0x82f37b000-0x82f37ffff]
[ 0.004771] Zone ranges:
[ 0.004771] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004772] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004773] Normal [mem 0x0000000100000000-0x000000082f37ffff]
[ 0.004774] Device empty
[ 0.004775] Movable zone start for each node
[ 0.004775] Early memory node ranges
[ 0.004776] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.004777] node 0: [mem 0x0000000000100000-0x0000000009d1efff]
[ 0.004777] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.004778] node 0: [mem 0x000000000a211000-0x00000000c327ffff]
[ 0.004779] node 0: [mem 0x00000000c3281000-0x00000000ca244fff]
[ 0.004779] node 0: [mem 0x00000000cb9ff000-0x00000000ccffffff]
[ 0.004780] node 0: [mem 0x0000000100000000-0x000000082f37ffff]
[ 0.004782] Initmem setup node 0 [mem 0x0000000000001000-0x000000082f37ffff]
[ 0.004785] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.004799] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.004924] On node 0, zone DMA32: 737 pages in unavailable ranges
[ 0.007950] On node 0, zone DMA32: 17 pages in unavailable ranges
[ 0.008075] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.008137] On node 0, zone DMA32: 6074 pages in unavailable ranges
[ 0.040644] On node 0, zone Normal: 12288 pages in unavailable ranges
[ 0.040666] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.040856] ACPI: PM-Timer IO Port: 0x808
[ 0.040863] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.040874] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[ 0.040880] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[ 0.040881] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.040882] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.040885] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.040886] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.040892] e820: update [mem 0xc5ca3000-0xc5d96fff] usable ==> reserved
[ 0.040902] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.040921] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.040923] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.040924] PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
[ 0.040925] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a210fff]
[ 0.040927] PM: hibernation: Registered nosave memory: [mem 0xb9153000-0xb9153fff]
[ 0.040928] PM: hibernation: Registered nosave memory: [mem 0xb9172000-0xb9172fff]
[ 0.040928] PM: hibernation: Registered nosave memory: [mem 0xb9173000-0xb9173fff]
[ 0.040930] PM: hibernation: Registered nosave memory: [mem 0xb9181000-0xb9181fff]
[ 0.040931] PM: hibernation: Registered nosave memory: [mem 0xc3280000-0xc3280fff]
[ 0.040932] PM: hibernation: Registered nosave memory: [mem 0xc5ca3000-0xc5d96fff]
[ 0.040933] PM: hibernation: Registered nosave memory: [mem 0xc8d1e000-0xc8d1efff]
[ 0.040935] PM: hibernation: Registered nosave memory: [mem 0xca245000-0xca5a8fff]
[ 0.040935] PM: hibernation: Registered nosave memory: [mem 0xca5a9000-0xca6f8fff]
[ 0.040936] PM: hibernation: Registered nosave memory: [mem 0xca6f9000-0xcaae5fff]
[ 0.040936] PM: hibernation: Registered nosave memory: [mem 0xcaae6000-0xcb9fefff]
[ 0.040937] PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
[ 0.040938] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe9fffff]
[ 0.040938] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.040939] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.040939] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.040940] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.040940] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.040941] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.040941] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.040941] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.040942] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.040942] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.040943] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.040943] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.040944] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.040944] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.040945] [mem 0xd0000000-0xfe9fffff] available for PCI devices
[ 0.040946] Booting paravirtualized kernel on bare hardware
[ 0.040948] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.044860] setup_percpu: NR_CPUS:320 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.045619] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.045624] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.045625] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.045631] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.045649] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=60cfd490-68c2-468f-8f82-1f7ca303d44b rw amd_pstate=guided msr.allow_writes=on rd.systemd.show_status=auto rd.udev.log_priority=3 vt.global_cursor_default=0
[ 0.045711] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[ 0.045727] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.045727] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.045728] printk: log_buf_len min size: 131072 bytes
[ 0.045858] printk: log_buf_len: 262144 bytes
[ 0.045858] printk: early log buf free: 112784(86%)
[ 0.048138] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.049279] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.049365] Fallback order for Node 0: 0
[ 0.049371] Built 1 zonelists, mobility grouping on. Total pages: 8235311
[ 0.049372] Policy zone: Normal
[ 0.049540] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.049572] software IO TLB: area num 32.
[ 0.104996] Memory: 32678232K/33464776K available (16384K kernel code, 2132K rwdata, 13064K rodata, 3404K init, 3852K bss, 786288K reserved, 0K cma-reserved)
[ 0.105181] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.105205] ftrace: allocating 48787 entries in 191 pages
[ 0.110827] ftrace: allocated 191 pages with 7 groups
[ 0.110889] Dynamic Preempt: full
[ 0.110957] rcu: Preemptible hierarchical RCU implementation.
[ 0.110957] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[ 0.110958] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.110958] Trampoline variant of Tasks RCU enabled.
[ 0.110959] Rude variant of Tasks RCU enabled.
[ 0.110959] Tracing variant of Tasks RCU enabled.
[ 0.110959] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.110960] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.112717] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[ 0.112894] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.112971] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.113005] Console: colour dummy device 80x25
[ 0.113006] printk: console [tty0] enabled
[ 0.113047] ACPI: Core revision 20230628
[ 0.113151] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.113165] APIC: Switch to symmetric I/O mode setup
[ 0.113914] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[ 0.430974] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.430990] APIC: Switched APIC routing to: physical flat
[ 0.431598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.446513] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e3bfba92f, max_idle_ns: 440795278717 ns
[ 0.446516] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.67 BogoMIPS (lpj=11999480)
[ 0.446527] Zenbleed: please update your microcode for the most optimal fix
[ 0.446528] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.446566] LVT offset 1 assigned for vector 0xf9
[ 0.446678] LVT offset 2 assigned for vector 0xf4
[ 0.446708] process: using mwait in idle threads
[ 0.446709] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.446710] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.446712] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.446713] Spectre V2 : Mitigation: Retpolines
[ 0.446714] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.446714] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.446715] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.446715] RETBleed: Mitigation: untrained return thunk
[ 0.446716] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.446717] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[ 0.446718] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.446719] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.446719] Speculative Return Stack Overflow: IBPB-extending microcode not applied!
[ 0.446720] Speculative Return Stack Overflow: WARNING: See https://kernel.org/doc/html/latest/admin-guide/hw-vuln/srso.html for mitigation options.
[ 0.446720] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.446723] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.446724] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.446724] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.446725] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.446726] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.462703] Freeing SMP alternatives memory: 40K
[ 0.462704] pid_max: default: 32768 minimum: 301
[ 0.466113] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.466141] landlock: Up and running.
[ 0.466142] Yama: becoming mindful.
[ 0.466146] LSM support for eBPF active
[ 0.466203] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.466235] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.576135] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.576312] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ 0.576330] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ 0.576346] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ 0.576364] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.576368] ... version: 0
[ 0.576369] ... bit width: 48
[ 0.576370] ... generic registers: 6
[ 0.576371] ... value mask: 0000ffffffffffff
[ 0.576372] ... max period: 00007fffffffffff
[ 0.576373] ... fixed-purpose events: 0
[ 0.576374] ... event mask: 000000000000003f
[ 0.576455] signal: max sigframe size: 1776
[ 0.576478] rcu: Hierarchical SRCU implementation.
[ 0.576479] rcu: Max phase no-delay instances is 1000.
[ 0.576515] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.576515] smp: Bringing up secondary CPUs ...
[ 0.576515] smpboot: x86: Booting SMP configuration:
[ 0.576515] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.595183] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.609899] smp: Brought up 1 node, 16 CPUs
[ 0.609899] smpboot: Max logical packages: 2
[ 0.609899] smpboot: Total of 16 processors activated (115241.80 BogoMIPS)
[ 0.613364] devtmpfs: initialized
[ 0.613364] x86/mm: Memory block size: 128MB
[ 0.616577] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a210fff] (69632 bytes)
[ 0.616581] ACPI: PM: Registering ACPI NVS region [mem 0xca6f9000-0xcaae5fff] (4116480 bytes)
[ 0.616716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.616741] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.616836] pinctrl core: initialized pinctrl subsystem
[ 0.616916] PM: RTC time: 23:24:29, date: 2023-11-27
[ 0.617347] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.617701] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.617880] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.618087] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.618106] audit: initializing netlink subsys (disabled)
[ 0.618113] audit: type=2000 audit(1701127468.189:1): state=initialized audit_enabled=0 res=1
[ 0.618113] thermal_sys: Registered thermal governor 'fair_share'
[ 0.618113] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.618113] thermal_sys: Registered thermal governor 'step_wise'
[ 0.618113] thermal_sys: Registered thermal governor 'user_space'
[ 0.618113] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.618113] cpuidle: using governor ladder
[ 0.618113] cpuidle: using governor menu
[ 0.618113] Detected 1 PCC Subspaces
[ 0.618113] Registering PCC driver as Mailbox controller
[ 0.618113] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.618113] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.618113] PCI: not using MMCONFIG
[ 0.618113] PCI: Using configuration type 1 for base access
[ 0.618113] PCI: Using configuration type 1 for extended access
[ 0.618113] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.618113] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.618113] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.618113] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.618113] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.619953] ACPI: Added _OSI(Module Device)
[ 0.619955] ACPI: Added _OSI(Processor Device)
[ 0.619956] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.619957] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.635727] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.638096] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.638540] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.638540] ACPI: Interpreter enabled
[ 0.638540] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.638540] ACPI: Using IOAPIC for interrupt routing
[ 0.638540] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.638540] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
[ 0.638540] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.638540] PCI: Ignoring E820 reservations for host bridge windows
[ 0.638629] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.653812] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.653817] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.653988] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
[ 0.654307] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.654317] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.655010] PCI host bridge to bus 0000:00
[ 0.655012] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.655014] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.655016] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.655017] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.655021] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.655022] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window]
[ 0.655024] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.655026] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.655044] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.655155] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[ 0.655265] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.655334] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[ 0.655361] pci 0000:00:01.2: enabling Extended Tags
[ 0.655412] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.655608] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.655678] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.655745] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.655830] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.656696] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.656769] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.656838] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.656904] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.656929] pci 0000:00:07.1: enabling Extended Tags
[ 0.656971] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.657114] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.657180] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.657207] pci 0000:00:08.1: enabling Extended Tags
[ 0.657252] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.657422] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.657553] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.657711] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.657752] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.657791] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.657830] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.657869] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.657908] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.657947] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.657985] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.658087] pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
[ 0.658144] pci 0000:01:00.0: enabling Extended Tags
[ 0.658232] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.658339] pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
[ 0.658508] pci 0000:00:01.2: PCI bridge to [bus 01-08]
[ 0.658512] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.658515] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.658798] pci 0000:02:01.0: [1022:57a3] type 01 class 0x060400
[ 0.658870] pci 0000:02:01.0: enabling Extended Tags
[ 0.659113] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.659649] pci 0000:02:04.0: [1022:57a3] type 01 class 0x060400
[ 0.659721] pci 0000:02:04.0: enabling Extended Tags
[ 0.659965] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.660482] pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
[ 0.660553] pci 0000:02:05.0: enabling Extended Tags
[ 0.660796] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 0.661312] pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
[ 0.661383] pci 0000:02:08.0: enabling Extended Tags
[ 0.661570] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.661853] pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
[ 0.661925] pci 0000:02:09.0: enabling Extended Tags
[ 0.662091] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[ 0.662325] pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
[ 0.662396] pci 0000:02:0a.0: enabling Extended Tags
[ 0.662571] pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
[ 0.662816] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 0.662823] pci 0000:01:00.0: bridge window [io 0xf000-0xffff]
[ 0.662827] pci 0000:01:00.0: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.662948] pci 0000:03:00.0: [15b7:501d] type 00 class 0x010802
[ 0.662979] pci 0000:03:00.0: reg 0x10: [mem 0xfc800000-0xfc803fff 64bit]
[ 0.663025] pci 0000:03:00.0: reg 0x20: [mem 0xfc804000-0xfc8040ff 64bit]
[ 0.663410] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 0.663420] pci 0000:02:01.0: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.663570] pci 0000:04:00.0: [8086:2526] type 00 class 0x028000
[ 0.663603] pci 0000:04:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit]
[ 0.663777] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.664025] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.664035] pci 0000:02:04.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.664159] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.664186] pci 0000:05:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.664223] pci 0000:05:00.0: reg 0x18: [mem 0xfc604000-0xfc604fff 64bit]
[ 0.664246] pci 0000:05:00.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit]
[ 0.664396] pci 0000:05:00.0: supports D1 D2
[ 0.664397] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.664685] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.664691] pci 0000:02:05.0: bridge window [io 0xf000-0xffff]
[ 0.664696] pci 0000:02:05.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.664830] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000
[ 0.664899] pci 0000:06:00.0: enabling Extended Tags
[ 0.665079] pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.665306] pci 0000:06:00.1: [1022:149c] type 00 class 0x0c0330
[ 0.665636] pci 0000:06:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
[ 0.666373] pci 0000:06:00.1: enabling Extended Tags
[ 0.666903] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.667344] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.667370] pci 0000:06:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
[ 0.667432] pci 0000:06:00.3: enabling Extended Tags
[ 0.667511] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[ 0.667691] pci 0000:02:08.0: PCI bridge to [bus 06]
[ 0.667701] pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
[ 0.667805] pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
[ 0.667876] pci 0000:07:00.0: reg 0x24: [mem 0xfc500000-0xfc5007ff]
[ 0.667897] pci 0000:07:00.0: enabling Extended Tags
[ 0.667999] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.668094] pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.668198] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 0.668208] pci 0000:02:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.668312] pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
[ 0.668384] pci 0000:08:00.0: reg 0x24: [mem 0xfc400000-0xfc4007ff]
[ 0.668404] pci 0000:08:00.0: enabling Extended Tags
[ 0.668506] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 0.668602] pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.668706] pci 0000:02:0a.0: PCI bridge to [bus 08]
[ 0.668715] pci 0000:02:0a.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.668841] pci 0000:09:00.0: [10de:1e84] type 00 class 0x030000
[ 0.668856] pci 0000:09:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.668869] pci 0000:09:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.668882] pci 0000:09:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.668891] pci 0000:09:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.668900] pci 0000:09:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
[ 0.668921] pci 0000:09:00.0: BAR 1: assigned to efifb
[ 0.668974] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.669063] pci 0000:09:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.669210] pci 0000:09:00.1: [10de:10f8] type 00 class 0x040300
[ 0.669223] pci 0000:09:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
[ 0.669407] pci 0000:09:00.2: [10de:1ad8] type 00 class 0x0c0330
[ 0.669427] pci 0000:09:00.2: reg 0x10: [mem 0xe2000000-0xe203ffff 64bit pref]
[ 0.669447] pci 0000:09:00.2: reg 0x1c: [mem 0xe2040000-0xe204ffff 64bit pref]
[ 0.669512] pci 0000:09:00.2: PME# supported from D0 D3hot D3cold
[ 0.669593] pci 0000:09:00.3: [10de:1ad9] type 00 class 0x0c8000
[ 0.669606] pci 0000:09:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff]
[ 0.669688] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
[ 0.669799] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.669804] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.669806] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.669811] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.669863] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
[ 0.669893] pci 0000:0a:00.0: enabling Extended Tags
[ 0.670060] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.670131] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
[ 0.670166] pci 0000:0b:00.0: enabling Extended Tags
[ 0.670330] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
[ 0.670346] pci 0000:0b:00.1: reg 0x18: [mem 0xfca00000-0xfcafffff]
[ 0.670359] pci 0000:0b:00.1: reg 0x24: [mem 0xfcb08000-0xfcb09fff]
[ 0.670368] pci 0000:0b:00.1: enabling Extended Tags
[ 0.670505] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.670519] pci 0000:0b:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[ 0.670550] pci 0000:0b:00.3: enabling Extended Tags
[ 0.670599] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[ 0.670731] pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300
[ 0.670741] pci 0000:0b:00.4: reg 0x10: [mem 0xfcb00000-0xfcb07fff]
[ 0.670768] pci 0000:0b:00.4: enabling Extended Tags
[ 0.670814] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[ 0.670947] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.670952] pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
[ 0.671628] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.671704] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.671772] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.671853] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.671928] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.671989] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.672051] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.672113] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.673196] iommu: Default domain type: Translated
[ 0.673196] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.673385] SCSI subsystem initialized
[ 0.673397] libata version 3.00 loaded.
[ 0.673397] ACPI: bus type USB registered
[ 0.673397] usbcore: registered new interface driver usbfs
[ 0.673397] usbcore: registered new interface driver hub
[ 0.673397] usbcore: registered new device driver usb
[ 0.673397] pps_core: LinuxPPS API ver. 1 registered
[ 0.673397] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.673397] PTP clock support registered
[ 0.673397] EDAC MC: Ver: 3.0.0
[ 0.676542] efivars: Registered efivars operations
[ 0.676758] NetLabel: Initializing
[ 0.676759] NetLabel: domain hash size = 128
[ 0.676760] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.676778] NetLabel: unlabeled traffic allowed by default
[ 0.676784] mctp: management component transport protocol core
[ 0.676785] NET: Registered PF_MCTP protocol family
[ 0.676788] PCI: Using ACPI for IRQ routing
[ 0.679272] PCI: pci_cache_line_size set to 64 bytes
[ 0.679272] e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xb9153018-0xbbffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xb9173018-0xbbffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xc3280000-0xc3ffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xc5ca3000-0xc7ffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xc8d1e000-0xcbffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xca245000-0xcbffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.679272] e820: reserve RAM buffer [mem 0x82f380000-0x82fffffff]
[ 0.679874] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 0.679874] pci 0000:09:00.0: vgaarb: bridge control possible
[ 0.679874] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.679874] vgaarb: loaded
[ 0.679931] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.679936] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.683265] clocksource: Switched to clocksource tsc-early
[ 0.683418] VFS: Disk quotas dquot_6.6.0
[ 0.683434] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.683503] pnp: PnP ACPI init
[ 0.683609] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.683770] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.684009] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.684011] system 00:03: [io 0x0200-0x021f] has been reserved
[ 0.684350] pnp 00:04: [dma 0 disabled]
[ 0.684766] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.684769] system 00:05: [io 0x040b] has been reserved
[ 0.684771] system 00:05: [io 0x04d6] has been reserved
[ 0.684772] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.684774] system 00:05: [io 0x0c14] has been reserved
[ 0.684776] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.684778] system 00:05: [io 0x0c52] has been reserved
[ 0.684779] system 00:05: [io 0x0c6c] has been reserved
[ 0.684781] system 00:05: [io 0x0c6f] has been reserved
[ 0.684783] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.684784] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.684786] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.684788] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.684790] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.684791] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.684794] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.684796] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.684798] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.684800] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.684802] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.684804] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.684806] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.685573] pnp: PnP ACPI: found 6 devices
[ 0.691436] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.691509] NET: Registered PF_INET protocol family
[ 0.691650] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.693809] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.693843] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.693964] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.694196] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.694290] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.694423] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.694489] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.694550] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.694636] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.694643] NET: Registered PF_XDP protocol family
[ 0.694654] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 0.694661] pci 0000:02:01.0: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.694671] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.694676] pci 0000:02:04.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.694686] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.694689] pci 0000:02:05.0: bridge window [io 0xf000-0xffff]
[ 0.694695] pci 0000:02:05.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.694705] pci 0000:02:08.0: PCI bridge to [bus 06]
[ 0.694710] pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
[ 0.694720] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 0.694725] pci 0000:02:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.694735] pci 0000:02:0a.0: PCI bridge to [bus 08]
[ 0.694741] pci 0000:02:0a.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.694750] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 0.694753] pci 0000:01:00.0: bridge window [io 0xf000-0xffff]
[ 0.694759] pci 0000:01:00.0: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.694768] pci 0000:00:01.2: PCI bridge to [bus 01-08]
[ 0.694770] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.694774] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc8fffff]
[ 0.694779] pci 0000:00:03.1: PCI bridge to [bus 09]
[ 0.694781] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.694785] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.694787] pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.694792] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.694799] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.694802] pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
[ 0.694807] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.694809] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.694811] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.694813] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.694814] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.694816] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec02fff window]
[ 0.694817] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.694819] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
[ 0.694821] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc8fffff]
[ 0.694822] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.694824] pci_bus 0000:02: resource 1 [mem 0xfc200000-0xfc8fffff]
[ 0.694825] pci_bus 0000:03: resource 1 [mem 0xfc800000-0xfc8fffff]
[ 0.694827] pci_bus 0000:04: resource 1 [mem 0xfc700000-0xfc7fffff]
[ 0.694829] pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
[ 0.694830] pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc6fffff]
[ 0.694832] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc3fffff]
[ 0.694834] pci_bus 0000:07: resource 1 [mem 0xfc500000-0xfc5fffff]
[ 0.694835] pci_bus 0000:08: resource 1 [mem 0xfc400000-0xfc4fffff]
[ 0.694837] pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
[ 0.694838] pci_bus 0000:09: resource 1 [mem 0xfb000000-0xfc0fffff]
[ 0.694840] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe20fffff 64bit pref]
[ 0.694842] pci_bus 0000:0b: resource 1 [mem 0xfc900000-0xfcbfffff]
[ 0.695358] pci 0000:09:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.695386] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[ 0.695452] pci 0000:09:00.2: D0 power state depends on 0000:09:00.0
[ 0.695606] pci 0000:09:00.3: D0 power state depends on 0000:09:00.0
[ 0.695785] PCI: CLS 64 bytes, default 64
[ 0.695793] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.695828] Trying to unpack rootfs image as initramfs...
[ 0.695841] pci 0000:00:01.0: Adding to iommu group 0
[ 0.695859] pci 0000:00:01.2: Adding to iommu group 1
[ 0.695884] pci 0000:00:02.0: Adding to iommu group 2
[ 0.695911] pci 0000:00:03.0: Adding to iommu group 3
[ 0.695929] pci 0000:00:03.1: Adding to iommu group 4
[ 0.695954] pci 0000:00:04.0: Adding to iommu group 5
[ 0.695980] pci 0000:00:05.0: Adding to iommu group 6
[ 0.696006] pci 0000:00:07.0: Adding to iommu group 7
[ 0.696024] pci 0000:00:07.1: Adding to iommu group 8
[ 0.696060] pci 0000:00:08.0: Adding to iommu group 9
[ 0.696088] pci 0000:00:08.1: Adding to iommu group 10
[ 0.696123] pci 0000:00:14.0: Adding to iommu group 11
[ 0.696140] pci 0000:00:14.3: Adding to iommu group 11
[ 0.696229] pci 0000:00:18.0: Adding to iommu group 12
[ 0.696246] pci 0000:00:18.1: Adding to iommu group 12
[ 0.696263] pci 0000:00:18.2: Adding to iommu group 12
[ 0.696280] pci 0000:00:18.3: Adding to iommu group 12
[ 0.696298] pci 0000:00:18.4: Adding to iommu group 12
[ 0.696315] pci 0000:00:18.5: Adding to iommu group 12
[ 0.696333] pci 0000:00:18.6: Adding to iommu group 12
[ 0.696350] pci 0000:00:18.7: Adding to iommu group 12
[ 0.696367] pci 0000:01:00.0: Adding to iommu group 13
[ 0.696408] pci 0000:02:01.0: Adding to iommu group 14
[ 0.696449] pci 0000:02:04.0: Adding to iommu group 15
[ 0.696489] pci 0000:02:05.0: Adding to iommu group 16
[ 0.696515] pci 0000:02:08.0: Adding to iommu group 17
[ 0.696542] pci 0000:02:09.0: Adding to iommu group 18
[ 0.696568] pci 0000:02:0a.0: Adding to iommu group 19
[ 0.696609] pci 0000:03:00.0: Adding to iommu group 20
[ 0.696648] pci 0000:04:00.0: Adding to iommu group 21
[ 0.696688] pci 0000:05:00.0: Adding to iommu group 22
[ 0.696693] pci 0000:06:00.0: Adding to iommu group 17
[ 0.696698] pci 0000:06:00.1: Adding to iommu group 17
[ 0.696704] pci 0000:06:00.3: Adding to iommu group 17
[ 0.696709] pci 0000:07:00.0: Adding to iommu group 18
[ 0.696714] pci 0000:08:00.0: Adding to iommu group 19
[ 0.696766] pci 0000:09:00.0: Adding to iommu group 23
[ 0.696791] pci 0000:09:00.1: Adding to iommu group 23
[ 0.696812] pci 0000:09:00.2: Adding to iommu group 23
[ 0.696834] pci 0000:09:00.3: Adding to iommu group 23
[ 0.696852] pci 0000:0a:00.0: Adding to iommu group 24
[ 0.696870] pci 0000:0b:00.0: Adding to iommu group 25
[ 0.696888] pci 0000:0b:00.1: Adding to iommu group 26
[ 0.696906] pci 0000:0b:00.3: Adding to iommu group 27
[ 0.696925] pci 0000:0b:00.4: Adding to iommu group 28
[ 0.701462] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.701466] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
[ 0.701472] AMD-Vi: Interrupt remapping enabled
[ 0.701584] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.701586] software IO TLB: mapped [mem 0x00000000bd6da000-0x00000000c16da000] (64MB)
[ 0.701670] LVT offset 0 assigned for vector 0x400
[ 0.703701] perf: AMD IBS detected (0x000003ff)
[ 0.703709] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.705557] Initialise system trusted keyrings
[ 0.705567] Key type blacklist registered
[ 0.705608] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.705618] zbud: loaded
[ 0.705784] integrity: Platform Keyring initialized
[ 0.705787] integrity: Machine keyring initialized
[ 0.712312] jitterentropy: Initialization failed with host not compliant with requirements: 9
[ 0.712314] Key type asymmetric registered
[ 0.712315] Asymmetric key parser 'x509' registered
[ 0.712329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.712380] io scheduler mq-deadline registered
[ 0.712382] io scheduler kyber registered
[ 0.712395] io scheduler bfq registered
[ 0.713588] pcieport 0000:00:01.2: AER: enabled with IRQ 28
[ 0.713752] pcieport 0000:00:03.1: AER: enabled with IRQ 29
[ 0.713977] pcieport 0000:00:07.1: AER: enabled with IRQ 31
[ 0.714110] pcieport 0000:00:08.1: AER: enabled with IRQ 32
[ 0.715688] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.715824] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.715845] ACPI: button: Power Button [PWRB]
[ 0.715876] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.716296] ACPI: button: Power Button [PWRF]
[ 0.719621] Estimated ratio of average max frequency by base frequency (times 1024): 1170
[ 0.719638] Monitor-Mwait will be used to enter C-1 state
[ 0.719646] ACPI: \_PR_.C000: Found 2 idle states
[ 0.719756] ACPI: \_PR_.C002: Found 2 idle states
[ 0.719885] ACPI: \_PR_.C004: Found 2 idle states
[ 0.719987] ACPI: \_PR_.C006: Found 2 idle states
[ 0.720106] ACPI: \_PR_.C008: Found 2 idle states
[ 0.720202] ACPI: \_PR_.C00A: Found 2 idle states
[ 0.720317] ACPI: \_PR_.C00C: Found 2 idle states
[ 0.720438] ACPI: \_PR_.C00E: Found 2 idle states
[ 0.720532] ACPI: \_PR_.C001: Found 2 idle states
[ 0.720652] ACPI: \_PR_.C003: Found 2 idle states
[ 0.720750] ACPI: \_PR_.C005: Found 2 idle states
[ 0.720874] ACPI: \_PR_.C007: Found 2 idle states
[ 0.720993] ACPI: \_PR_.C009: Found 2 idle states
[ 0.721109] ACPI: \_PR_.C00B: Found 2 idle states
[ 0.721242] ACPI: \_PR_.C00D: Found 2 idle states
[ 0.721364] ACPI: \_PR_.C00F: Found 2 idle states
[ 0.721618] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.721792] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.724373] Non-volatile memory driver v1.3
[ 0.724374] Linux agpgart interface v0.103
[ 0.754450] Freeing initrd memory: 12024K
[ 0.776315] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.776579] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.776599] ACPI: bus type drm_connector registered
[ 0.777157] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.777760] fbcon: Deferring console take-over
[ 0.777762] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.778707] ahci 0000:07:00.0: version 3.0
[ 0.779053] ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x8 impl SATA mode
[ 0.779056] ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.779353] scsi host0: ahci
[ 0.779453] scsi host1: ahci
[ 0.779546] scsi host2: ahci
[ 0.779637] scsi host3: ahci
[ 0.779674] ata1: DUMMY
[ 0.779675] ata2: DUMMY
[ 0.779676] ata3: DUMMY
[ 0.779678] ata4: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500280 irq 44
[ 0.779829] ahci 0000:08:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.779832] ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.779976] scsi host4: ahci
[ 0.780015] ata5: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400100 irq 57
[ 0.780097] usbcore: registered new interface driver usbserial_generic
[ 0.780102] usbserial: USB Serial support registered for generic
[ 0.780151] rtc_cmos 00:02: RTC can wake from S4
[ 0.780368] rtc_cmos 00:02: registered as rtc0
[ 0.780396] rtc_cmos 00:02: setting system clock to 2023-11-27T23:24:29 UTC (1701127469)
[ 0.780420] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.090094] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.229831] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.230184] hid: raw HID events driver (C) Jiri Kosina
[ 1.230336] drop_monitor: Initializing network drop monitor service
[ 1.241784] Initializing XFRM netlink socket
[ 1.241812] NET: Registered PF_INET6 protocol family
[ 1.246817] Segment Routing with IPv6
[ 1.246819] RPL Segment Routing with IPv6
[ 1.246827] In-situ OAM (IOAM) with IPv6
[ 1.246848] NET: Registered PF_PACKET protocol family
[ 1.248064] microcode: CPU2: patch_level=0x08701030
[ 1.248065] microcode: CPU4: patch_level=0x08701030
[ 1.248066] microcode: CPU5: patch_level=0x08701030
[ 1.248066] microcode: CPU0: patch_level=0x08701030
[ 1.248066] microcode: CPU6: patch_level=0x08701030
[ 1.248068] microcode: CPU3: patch_level=0x08701030
[ 1.248068] microcode: CPU8: patch_level=0x08701030
[ 1.248068] microcode: CPU9: patch_level=0x08701030
[ 1.248069] microcode: CPU10: patch_level=0x08701030
[ 1.248070] microcode: CPU11: patch_level=0x08701030
[ 1.248072] microcode: CPU13: patch_level=0x08701030
[ 1.248072] microcode: CPU12: patch_level=0x08701030
[ 1.248072] microcode: CPU1: patch_level=0x08701030
[ 1.248074] microcode: CPU14: patch_level=0x08701030
[ 1.248079] microcode: CPU7: patch_level=0x08701030
[ 1.248079] microcode: CPU15: patch_level=0x08701030
[ 1.248102] microcode: Microcode Update Driver: v2.2.
[ 1.248247] resctrl: L3 allocation detected
[ 1.248249] resctrl: MB allocation detected
[ 1.248249] resctrl: L3 monitoring detected
[ 1.248252] IPI shorthand broadcast: enabled
[ 1.250497] sched_clock: Marking stable (934639583, 313593676)->(1344660839, -96427580)
[ 1.250614] registered taskstats version 1
[ 1.251154] Loading compiled-in X.509 certificates
[ 1.253705] Loaded X.509 cert 'Build time autogenerated kernel key: 92f76bd0cc8429171204495fce7e88acda6cba35'
[ 1.256838] zswap: loaded using pool zstd/zsmalloc
[ 1.257955] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.258819] ata4.00: ATA-11: WDC WDS500G2B0A-00SM50, X61130WD, max UDMA/133
[ 1.259276] Key type .fscrypt registered
[ 1.259277] Key type fscrypt-provisioning registered
[ 1.259392] integrity: Loading X.509 certificate: UEFI:db
[ 1.259520] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.259589] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 1.259591] integrity: Loading X.509 certificate: UEFI:db
[ 1.259723] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 1.259724] integrity: Loading X.509 certificate: UEFI:db
[ 1.259740] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.259741] integrity: Loading X.509 certificate: UEFI:db
[ 1.259755] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.259756] integrity: Loading X.509 certificate: UEFI:db
[ 1.259881] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.260310] ata4.00: Features: Dev-Sleep
[ 1.260331] blacklist: Duplicate blacklisted hash bin:47ff1b63b140b6fc04ed79131331e651da5b2e2f170f5daef4153dc2fbc532b1
[ 1.260419] blacklist: Duplicate blacklisted hash bin:992d359aa7a5f789d268b94c11b9485a6b1ce64362b0edb4441ccc187c39647b
[ 1.260475] blacklist: Duplicate blacklisted hash bin:c452ab846073df5ace25cca64d6b7a09d906308a1a65eb5240e3c4ebcaa9cc0c
[ 1.260506] blacklist: Duplicate blacklisted hash bin:e051b788ecbaeda53046c70e6af6058f95222c046157b8c4c1b9c2cfc65f46e5
[ 1.261376] PM: Magic number: 15:875:454
[ 1.262692] ata4.00: configured for UDMA/133
[ 1.267056] RAS: Correctable Errors collector initialized.
[ 1.267206] clk: Disabling unused clocks
[ 1.274736] scsi 3:0:0:0: Direct-Access ATA WDC WDS500G2B0A- 30WD PQ: 0 ANSI: 5
[ 1.275027] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.275034] sd 3:0:0:0: [sda] Write Protect is off
[ 1.275036] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.275046] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.275060] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.277269] sda: sda2
[ 1.277319] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.278404] Freeing unused decrypted memory: 2028K
[ 1.278839] Freeing unused kernel image (initmem) memory: 3404K
[ 1.298184] Write protecting the kernel read-only data: 30720k
[ 1.298566] Freeing unused kernel image (rodata/data gap) memory: 1272K
[ 1.353680] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.353683] rodata_test: all tests were successful
[ 1.353694] Run /init as init process
[ 1.353696] with arguments:
[ 1.353697] /init
[ 1.353698] with environment:
[ 1.353699] HOME=/
[ 1.353700] TERM=linux
[ 1.353701] BOOT_IMAGE=/vmlinuz-linux
[ 1.364351] fbcon: Taking over console
[ 1.369781] Console: switching to colour frame buffer device 240x67
[ 1.511301] xhci_hcd 0000:06:00.1: xHCI Host Controller
[ 1.511312] xhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 1
[ 1.511479] xhci_hcd 0000:06:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000200000410
[ 1.512083] xhci_hcd 0000:06:00.1: xHCI Host Controller
[ 1.512086] xhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 2
[ 1.512089] xhci_hcd 0000:06:00.1: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.512188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 1.512194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.512199] usb usb1: Product: xHCI Host Controller
[ 1.512204] usb usb1: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.512208] usb usb1: SerialNumber: 0000:06:00.1
[ 1.512535] hub 1-0:1.0: USB hub found
[ 1.512549] hub 1-0:1.0: 6 ports detected
[ 1.514035] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.514059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 1.514061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514063] usb usb2: Product: xHCI Host Controller
[ 1.514064] usb usb2: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.514066] usb usb2: SerialNumber: 0000:06:00.1
[ 1.514149] hub 2-0:1.0: USB hub found
[ 1.514159] hub 2-0:1.0: 4 ports detected
[ 1.515467] xhci_hcd 0000:06:00.3: xHCI Host Controller
[ 1.515473] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 3
[ 1.515638] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000200000410
[ 1.516100] xhci_hcd 0000:06:00.3: xHCI Host Controller
[ 1.516103] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 4
[ 1.516106] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.516143] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 1.516145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516147] usb usb3: Product: xHCI Host Controller
[ 1.516149] usb usb3: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.516150] usb usb3: SerialNumber: 0000:06:00.3
[ 1.516280] hub 3-0:1.0: USB hub found
[ 1.516295] hub 3-0:1.0: 6 ports detected
[ 1.517869] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.517893] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 1.517896] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.517897] usb usb4: Product: xHCI Host Controller
[ 1.517899] usb usb4: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.517900] usb usb4: SerialNumber: 0000:06:00.3
[ 1.518020] hub 4-0:1.0: USB hub found
[ 1.518033] hub 4-0:1.0: 4 ports detected
[ 1.519184] xhci_hcd 0000:09:00.2: xHCI Host Controller
[ 1.519189] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 5
[ 1.519546] nvme nvme0: pci function 0000:03:00.0
[ 1.519806] xhci_hcd 0000:09:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[ 1.519958] xhci_hcd 0000:09:00.2: xHCI Host Controller
[ 1.519962] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 6
[ 1.519964] xhci_hcd 0000:09:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.520016] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 1.520019] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.520020] usb usb5: Product: xHCI Host Controller
[ 1.520022] usb usb5: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.520023] usb usb5: SerialNumber: 0000:09:00.2
[ 1.520098] hub 5-0:1.0: USB hub found
[ 1.520105] hub 5-0:1.0: 2 ports detected
[ 1.520207] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.520230] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 1.520232] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.520233] usb usb6: Product: xHCI Host Controller
[ 1.520235] usb usb6: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.520236] usb usb6: SerialNumber: 0000:09:00.2
[ 1.520311] hub 6-0:1.0: USB hub found
[ 1.520321] hub 6-0:1.0: 4 ports detected
[ 1.520532] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 1.520537] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 7
[ 1.520648] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000200000410
[ 1.521032] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 1.521035] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 8
[ 1.521037] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.521076] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 1.521078] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.521080] usb usb7: Product: xHCI Host Controller
[ 1.521081] usb usb7: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.521082] usb usb7: SerialNumber: 0000:0b:00.3
[ 1.521223] hub 7-0:1.0: USB hub found
[ 1.521231] hub 7-0:1.0: 4 ports detected
[ 1.521448] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.521482] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 1.521485] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.521487] usb usb8: Product: xHCI Host Controller
[ 1.521488] usb usb8: Manufacturer: Linux 6.6.2-arch1-1 xhci-hcd
[ 1.521489] usb usb8: SerialNumber: 0000:0b:00.3
[ 1.521591] hub 8-0:1.0: USB hub found
[ 1.521599] hub 8-0:1.0: 4 ports detected
[ 1.539898] nvme nvme0: allocated 32 MiB host memory buffer.
[ 1.541755] nvme nvme0: 16/0/0 default/read/poll queues
[ 1.545750] nvme0n1: p1 p2 p3 p4
[ 1.658852] EXT4-fs (sda2): mounted filesystem 60cfd490-68c2-468f-8f82-1f7ca303d44b r/w with ordered data mode. Quota mode: none.
[ 1.703611] tsc: Refined TSC clocksource calibration: 3599.999 MHz
[ 1.703623] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns
[ 1.703884] clocksource: Switched to clocksource tsc
[ 1.773328] systemd[1]: systemd 254.6-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.773339] systemd[1]: Detected architecture x86-64.
[ 1.773648] usb 3-5: new full-speed USB device number 2 using xhci_hcd
[ 1.773655] usb 7-3: new high-speed USB device number 2 using xhci_hcd
[ 1.776187] systemd[1]: Hostname set to <maincomputer>.
[ 1.938197] usb 7-3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.23
[ 1.938208] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.938212] usb 7-3: Product: 4-Port USB 2.0 Hub
[ 1.938217] usb 7-3: Manufacturer: Generic
[ 1.940165] usb 3-5: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
[ 1.940170] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.001982] hub 7-3:1.0: USB hub found
[ 2.003205] hub 7-3:1.0: 4 ports detected
[ 2.058021] systemd[1]: bpf-lsm: LSM BPF program attached
[ 2.065550] usb 8-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.066938] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[ 2.094444] usb 8-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.23
[ 2.094448] usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.094450] usb 8-3: Product: 4-Port USB 3.0 Hub
[ 2.094452] usb 8-3: Manufacturer: Generic
[ 2.116257] hub 8-3:1.0: USB hub found
[ 2.117494] hub 8-3:1.0: 4 ports detected
[ 2.227149] usb 3-6: config 1 has an invalid interface number: 2 but max is 1
[ 2.227153] usb 3-6: config 1 has no interface number 1
[ 2.239149] usb 3-6: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
[ 2.239152] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.239154] usb 3-6: Product: AURA LED Controller
[ 2.239155] usb 3-6: Manufacturer: AsusTek Computer Inc.
[ 2.239157] usb 3-6: SerialNumber: 9876543210
[ 2.346939] usb 7-3.1: new full-speed USB device number 3 using xhci_hcd
[ 2.361089] systemd[1]: Queued start job for default target Multi-User System.
[ 2.398091] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 2.399123] systemd[1]: Created slice Slice /system/getty.
[ 2.399506] systemd[1]: Created slice Slice /system/modprobe.
[ 2.400584] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 2.401048] systemd[1]: Created slice User and Session Slice.
[ 2.401136] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.401206] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.401355] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.401419] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.401455] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 2.401496] systemd[1]: Reached target Path Units.
[ 2.401529] systemd[1]: Reached target Remote File Systems.
[ 2.401559] systemd[1]: Reached target Slice Units.
[ 2.401596] systemd[1]: Reached target Local Verity Protected Volumes.
[ 2.401669] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.402100] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.402955] systemd[1]: Listening on Process Core Dump Socket.
[ 2.403074] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.403186] systemd[1]: Listening on Journal Socket.
[ 2.403309] systemd[1]: Listening on udev Control Socket.
[ 2.403400] systemd[1]: Listening on udev Kernel Socket.
[ 2.404549] systemd[1]: Mounting /dev/hugepages...
[ 2.406220] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.407864] systemd[1]: Mounting Kernel Debug File System...
[ 2.409648] systemd[1]: Mounting Kernel Trace File System...
[ 2.411200] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.412236] systemd[1]: Starting Load Kernel Module configfs...
[ 2.413884] systemd[1]: Starting Load Kernel Module dm_mod...
[ 2.415499] systemd[1]: Starting Load Kernel Module drm...
[ 2.417198] systemd[1]: Starting Load Kernel Module fuse...
[ 2.418806] systemd[1]: Starting Load Kernel Module loop...
[ 2.419542] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.421022] systemd[1]: Starting Load Kernel Modules...
[ 2.421702] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 2.422618] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.423496] systemd[1]: Starting Coldplug All udev Devices...
[ 2.424734] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.424996] systemd[1]: Mounted Kernel Debug File System.
[ 2.425087] systemd[1]: Mounted Kernel Trace File System.
[ 2.426899] device-mapper: uevent: version 1.0.3
[ 2.426952] loop: module loaded
[ 2.426987] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 2.427712] EXT4-fs (sda2): re-mounted 60cfd490-68c2-468f-8f82-1f7ca303d44b r/w. Quota mode: none.
[ 2.427999] AMDPowerProfiler: loading out-of-tree module taints kernel.
[ 2.428003] AMDPowerProfiler: module verification failed: signature and/or required key missing - tainting kernel
[ 2.429574] fuse: init (API version 7.39)
[ 2.431010] AMDPowerProfiler: Registration was successful.
[ 2.431012] AMDPowerProfiler: Version is 10.2-1
[ 2.431013] AMDPowerProfiler: Device name: AMDPowerProfiler, Major device number: 237.
[ 2.441321] i2c_dev: i2c /dev entries driver
[ 2.460512] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.461625] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.480080] usb 7-3.1: New USB device found, idVendor=258a, idProduct=002a, bcdDevice= 0.01
[ 2.480085] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.480087] usb 7-3.1: Product: Usb Gaming Keyboard
[ 2.480089] usb 7-3.1: Manufacturer: BY Tech
[ 2.490536] systemd[1]: Finished Load Kernel Module configfs.
[ 2.491013] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.523854] systemd[1]: Finished Load Kernel Module dm_mod.
[ 2.524230] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.545707] usb 8-3.4: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.547180] systemd[1]: Finished Load Kernel Module drm.
[ 2.547528] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.573119] usb 8-3.4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.23
[ 2.573125] usb 8-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.573127] usb 8-3.4: Product: 4-Port USB 3.0 Hub
[ 2.573130] usb 8-3.4: Manufacturer: Generic
[ 2.587193] systemd[1]: Finished Load Kernel Module fuse.
[ 2.587583] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.596219] hub 8-3.4:1.0: USB hub found
[ 2.598566] hub 8-3.4:1.0: 4 ports detected
[ 2.623948] systemd[1]: Finished Load Kernel Module loop.
[ 2.643603] usb 7-3.2: new full-speed USB device number 4 using xhci_hcd
[ 2.653881] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.683880] systemd[1]: Finished Coldplug All udev Devices.
[ 2.737029] systemd[1]: Mounting FUSE Control File System...
[ 2.738060] systemd[1]: Mounting Kernel Configuration File System...
[ 2.739742] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 2.740771] systemd[1]: Starting Load/Save OS Random Seed...
[ 2.742136] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.743484] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 2.744756] systemd[1]: Mounted FUSE Control File System.
[ 2.744862] systemd[1]: Mounted Kernel Configuration File System.
[ 2.745964] systemd[1]: Mounted /dev/hugepages.
[ 2.767087] usb 7-3.2: New USB device found, idVendor=0d8c, idProduct=016c, bcdDevice= 1.00
[ 2.767092] usb 7-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.767094] usb 7-3.2: Product: USB Advanced Audio Device
[ 2.767096] usb 7-3.2: Manufacturer: C-Media Electronics Inc.
[ 2.787088] systemd[1]: Finished Load/Save OS Random Seed.
[ 2.817092] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 2.840422] systemd[1]: Starting Create System Users...
[ 2.870260] nvidia: module license 'NVIDIA' taints kernel.
[ 2.870289] Disabling lock debugging due to kernel taint
[ 2.870292] nvidia: module license taints kernel.
[ 2.876962] usb 7-3.4: new high-speed USB device number 5 using xhci_hcd
[ 2.900488] systemd[1]: Finished Create System Users.
[ 2.930654] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.983760] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 2.984342] systemd[1]: Reached target Preparation for Local File Systems.
[ 2.984777] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[ 2.984826] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
[ 2.999833] usb 7-3.4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.23
[ 2.999839] usb 7-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.999841] usb 7-3.4: Product: 4-Port USB 2.0 Hub
[ 2.999843] usb 7-3.4: Manufacturer: Generic
[ 3.027059] systemd[1]: Starting Journal Service...
[ 3.032304] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 3.038557] systemd-journald[378]: Collecting audit messages is disabled.
[ 3.057758] hub 7-3.4:1.0: USB hub found
[ 3.059084] hub 7-3.4:1.0: 4 ports detected
[ 3.094079] systemd[1]: Started Journal Service.
[ 3.184863] systemd-journald[378]: Received client request to flush runtime journal.
[ 3.207733] systemd-journald[378]: /var/log/journal/7540644eb9d94a60bff538d22c4da0e6/system.journal: Journal file uses a different sequence number ID, rotating.
[ 3.207738] systemd-journald[378]: Rotating system journal.
[ 3.230121] Adding 97819644k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:97819644k SS
[ 3.371291] nvidia-gpu 0000:09:00.3: enabling device (0000 -> 0002)
[ 3.371780] zenpower 0000:00:18.3: Using ZEN2 calculation formula.
[ 3.371813] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.371818] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 3.371827] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.372045] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 3.376332] nvidia-nvlink: Nvlink Core is being initialized, major device number 235
[ 3.377245] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 3.377638] nvidia 0000:09:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 3.378681] hid-generic 0003:0B05:18F3.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:06:00.3-6/input2
[ 3.380095] raid6: skipped pq benchmark and selected avx2x4
[ 3.380097] raid6: using avx2x2 recovery algorithm
[ 3.380357] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 3.380360] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.380414] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 3.382341] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 3.383242] input: BY Tech Usb Gaming Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.0/0003:258A:002A.0002/input/input3
[ 3.385992] xor: automatically using best checksumming function avx
[ 3.386158] cryptd: max_cpu_qlen set to 1000
[ 3.394259] asus_wmi: ASUS WMI generic driver loaded
[ 3.394635] EXT4-fs (nvme0n1p3): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[ 3.401488] asus_wmi: Initialization: 0x0
[ 3.401548] asus_wmi: BIOS WMI version: 0.9
[ 3.401640] AVX2 version of gcm_enc/dec engaged.
[ 3.401696] AES CTR mode by8 optimization enabled
[ 3.401952] asus_wmi: SFUN value: 0x0
[ 3.401957] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 3.406250] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[ 3.406590] EXT4-fs (nvme0n1p3): mounted filesystem eafbcc17-183a-47bf-98d9-b8ed0bb8276d r/w with ordered data mode. Quota mode: none.
[ 3.406743] r8169 0000:05:00.0 eth0: RTL8168h/8111h, 24:4b:fe:03:25:f0, XID 541, IRQ 98
[ 3.406747] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 3.406943] usb 7-3.4.4: new full-speed USB device number 6 using xhci_hcd
[ 3.424541] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 545.29.06 Thu Nov 16 01:59:08 UTC 2023
[ 3.440437] hid-generic 0003:258A:002A.0002: input,hidraw1: USB HID v1.11 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:0b:00.3-3.1/input0
[ 3.445831] input: BY Tech Usb Gaming Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input5
[ 3.476330] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 3.503751] input: BY Tech Usb Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input6
[ 3.503837] input: BY Tech Usb Gaming Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input8
[ 3.503908] input: BY Tech Usb Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input9
[ 3.504038] hid-generic 0003:258A:002A.0003: input,hiddev97,hidraw2: USB HID v1.11 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:0b:00.3-3.1/input1
[ 3.506307] input: C-Media Electronics Inc. USB Advanced Audio Device Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.2/7-3.2:1.3/0003:0D8C:016C.0004/input/input10
[ 3.509657] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 3.510941] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.511131] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.512654] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.512658] cfg80211: failed to load regulatory.db
[ 3.522106] usb 7-3.4.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[ 3.522117] usb 7-3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.522121] usb 7-3.4.4: Product: USB Receiver
[ 3.522126] usb 7-3.4.4: Manufacturer: Logitech
[ 3.559813] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 545.29.06 Thu Nov 16 01:47:29 UTC 2023
[ 3.563741] hid-generic 0003:0D8C:016C.0004: input,hiddev98,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-0000:0b:00.3-3.2/input3
[ 3.563784] usbcore: registered new interface driver usbhid
[ 3.563786] usbhid: USB HID core driver
[ 3.568764] Btrfs loaded, zoned=yes, fsverity=yes
[ 3.642272] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.0/0003:046D:C52B.0005/input/input12
[ 3.682961] nvidia-uvm: Loaded the UVM driver, major device number 511.
[ 3.683265] BTRFS: device fsid 44e15822-76c2-4cf6-87f4-7f5ad82e2047 devid 1 transid 1725 /dev/nvme0n1p4 scanned by (udev-worker) (413)
[ 3.689023] [drm] [nvidia-drm] [GPU ID 0x00000900] Loading driver
[ 3.689026] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:09:00.0 on minor 1
[ 3.689227] Intel(R) Wireless WiFi driver for Linux
[ 3.698139] hid-generic 0003:046D:C52B.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0b:00.3-3.4.4/input0
[ 3.700933] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[ 3.702281] iwlwifi 0000:04:00.0: Detected crf-id 0x2816, cnv-id 0x1000200 wfpm id 0x80000000
[ 3.702290] iwlwifi 0000:04:00.0: PCI dev 2526/0014, rev=0x321, rfid=0x105110
[ 3.702362] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.1/0003:046D:C52B.0006/input/input13
[ 3.702446] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.1/0003:046D:C52B.0006/input/input14
[ 3.717347] Bluetooth: Core ver 2.22
[ 3.717364] NET: Registered PF_BLUETOOTH protocol family
[ 3.717366] Bluetooth: HCI device and connection manager initialized
[ 3.717369] Bluetooth: HCI socket layer initialized
[ 3.717372] Bluetooth: L2CAP socket layer initialized
[ 3.717376] Bluetooth: SCO socket layer initialized
[ 3.717901] iwlwifi 0000:04:00.0: WRT: Overriding region id 0
[ 3.717904] iwlwifi 0000:04:00.0: WRT: Overriding region id 1
[ 3.717906] iwlwifi 0000:04:00.0: WRT: Overriding region id 2
[ 3.717907] iwlwifi 0000:04:00.0: WRT: Overriding region id 3
[ 3.717909] iwlwifi 0000:04:00.0: WRT: Overriding region id 4
[ 3.717910] iwlwifi 0000:04:00.0: WRT: Overriding region id 6
[ 3.717912] iwlwifi 0000:04:00.0: WRT: Overriding region id 8
[ 3.717913] iwlwifi 0000:04:00.0: WRT: Overriding region id 9
[ 3.717915] iwlwifi 0000:04:00.0: WRT: Overriding region id 10
[ 3.717916] iwlwifi 0000:04:00.0: WRT: Overriding region id 11
[ 3.717918] iwlwifi 0000:04:00.0: WRT: Overriding region id 15
[ 3.717919] iwlwifi 0000:04:00.0: WRT: Overriding region id 16
[ 3.717921] iwlwifi 0000:04:00.0: WRT: Overriding region id 18
[ 3.717923] iwlwifi 0000:04:00.0: WRT: Overriding region id 19
[ 3.717924] iwlwifi 0000:04:00.0: WRT: Overriding region id 20
[ 3.717926] iwlwifi 0000:04:00.0: WRT: Overriding region id 21
[ 3.717927] iwlwifi 0000:04:00.0: WRT: Overriding region id 28
[ 3.718200] iwlwifi 0000:04:00.0: loaded firmware version 46.ff18e32a.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[ 3.729674] vboxdrv: Found 16 processor cores/threads
[ 3.730320] ccp 0000:0b:00.1: enabling device (0000 -> 0002)
[ 3.730913] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[ 3.730935] ccp 0000:0b:00.1: psp enabled
[ 3.735386] snd_hda_intel 0000:09:00.1: enabling device (0000 -> 0002)
[ 3.735446] snd_hda_intel 0000:09:00.1: Disabling MSI
[ 3.735456] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
[ 3.735669] snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002)
[ 3.758119] vboxdrv: TSC mode is Invariant, tentative frequency 3599992325 Hz
[ 3.758124] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
[ 3.760298] VBoxNetAdp: Successfully started.
[ 3.760712] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.1/0003:046D:C52B.0006/input/input15
[ 3.760816] hid-generic 0003:046D:C52B.0006: input,hiddev99,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0b:00.3-3.4.4/input1
[ 3.763415] hid-generic 0003:046D:C52B.0007: hiddev100,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0b:00.3-3.4.4/input2
[ 3.775325] VBoxNetFlt: Successfully started.
[ 3.793465] BTRFS info (device nvme0n1p4): using crc32c (crc32c-intel) checksum algorithm
[ 3.793471] BTRFS info (device nvme0n1p4): using free space tree
[ 3.815379] BTRFS info (device nvme0n1p4): enabling ssd optimizations
[ 3.815383] BTRFS info (device nvme0n1p4): auto enabling async discard
[ 3.853307] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
[ 3.853855] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 3.853861] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.853864] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.853866] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.853868] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.853870] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.853872] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.853879] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.853881] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.858757] usbcore: registered new interface driver btusb
[ 3.863221] kvm_amd: TSC scaling supported
[ 3.863223] kvm_amd: Nested Virtualization enabled
[ 3.863224] kvm_amd: Nested Paging enabled
[ 3.863226] kvm_amd: SEV enabled (ASIDs 1 - 509)
[ 3.863227] kvm_amd: SEV-ES disabled (ASIDs 0 - 0)
[ 3.863248] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 3.863248] kvm_amd: Virtual GIF supported
[ 3.863249] kvm_amd: LBR virtualization supported
[ 3.867909] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input17
[ 3.867992] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input18
[ 3.868058] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input19
[ 3.868135] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input20
[ 3.870554] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input21
[ 3.870658] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input22
[ 3.870799] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input23
[ 3.870924] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input24
[ 3.871041] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input25
[ 3.871160] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input26
[ 3.871345] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input27
[ 3.877092] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 3.877101] Bluetooth: hci0: Boot Address: 0x40800
[ 3.877102] Bluetooth: hci0: Firmware Version: 155-35.23
[ 3.877103] Bluetooth: hci0: Firmware already loaded
[ 3.879585] MCE: In-kernel MCE decoding enabled.
[ 3.880371] iwlwifi 0000:04:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x321
[ 3.880561] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 3.883198] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 3.927239] iwlwifi 0000:04:00.0: base HW address: 04:33:c2:b2:49:13, OTP minor version: 0x4
[ 3.954864] intel_rapl_common: Found RAPL domain package
[ 3.954866] intel_rapl_common: Found RAPL domain core
[ 3.995767] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.998307] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[ 4.063413] mousedev: PS/2 mouse device common for all mice
[ 4.205404] mc: Linux media interface: v0.10
[ 4.499623] nvidia-gpu 0000:09:00.3: i2c timeout error e0000000
[ 4.500672] ucsi_ccg 0-0008: i2c_transfer failed -110
[ 4.501217] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[ 4.501667] ucsi_ccg: probe of 0-0008 failed with error -110
[ 4.507442] usbcore: registered new interface driver snd-usb-audio
[ 4.640851] logitech-djreceiver 0003:046D:C52B.0007: hiddev99,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0b:00.3-3.4.4/input2
[ 4.664820] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
[ 4.705325] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.705328] Bluetooth: BNEP filters: protocol multicast
[ 4.705331] Bluetooth: BNEP socket layer initialized
[ 4.706239] Bluetooth: MGMT ver 1.22
[ 4.713781] NET: Registered PF_ALG protocol family
[ 4.764293] input: Logitech Wireless Device PID:4071 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input28
[ 4.765877] input: Logitech Wireless Device PID:4071 Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input29
[ 4.766005] hid-generic 0003:046D:4071.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4071] on usb-0000:0b:00.3-3.4.4/input2:1
[ 4.830288] Generic FE-GE Realtek PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[ 5.023782] r8169 0000:05:00.0 enp5s0: Link is Down
[ 5.147460] input: Logitech MX Master as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input33
[ 5.147660] logitech-hidpp-device 0003:046D:4071.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:0b:00.3-3.4.4/input2:1
[ 5.215817] iwlwifi 0000:04:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 5.479728] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 6.542193] Bridge firewalling registered
[ 7.510652] input: LogiOps Virtual Input as /devices/virtual/input/input34
[ 8.180749] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 8.182187] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 15.427016] systemd-journald[378]: /var/log/journal/7540644eb9d94a60bff538d22c4da0e6/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 15.627795] pipewire[1483]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 17.303995] Bluetooth: RFCOMM TTY layer initialized
[ 17.304003] Bluetooth: RFCOMM socket layer initialized
[ 17.304006] Bluetooth: RFCOMM ver 1.11
[ 20.167517] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 21.833809] xdg-desktop-por[1844]: segfault at 448 ip 00007fea3afaaf35 sp 00007ffd92d65d40 error 4 in libnvidia-glcore.so.545.29.06[7fea3a25f000+1a34000] likely on CPU 9 (core 1, socket 0)
[ 21.833827] Code: 77 db 8b 44 24 1c 45 31 f6 83 f8 04 74 0a 41 89 c6 83 c0 01 89 44 24 1c 49 63 c6 48 89 44 24 08 0f 1f 44 00 00 48 8b 44 24 08 <49> 8b 84 c5 48 04 00 00 4c 8b 78 10 4c 8b 60 08 eb 5b 66 0f 1f 84Offline
#2 2023-11-28 05:48:46
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,894
- Website
Re: X Server fails on startx
Does it work with nouveau? 
Juri divino omnia sunt communia
Offline
#3 2023-11-28 06:24:10
- linuxsimpleton43
- Member
- Registered: 2022-03-24
- Posts: 32
Re: X Server fails on startx
No clue, it wasn't an issue with Xorg but with my KDE Plasma desktop. I made a new home folder and had KDE regenerate its settings/go back to default configs. That allowed for the X Server to start without crashing.
Offline
#4 2023-11-28 09:09:13
- seth
- Member
- Registered: 2012-09-03
- Posts: 54,562
Re: X Server fails on startx
Enable https://wiki.archlinux.org/title/NVIDIA … de_setting and in doubt add "initcall_blacklist=simpledrm_platform_driver_init" to the https://wiki.archlinux.org/title/Kernel_parameters
Edit: also remove the nvidia-settings generated
[ 1810.144] (==) Using config file: "/etc/X11/xorg.conf"There're issues w/ the mime cache crashing KDE, possibly other DEs, but the server log in your OP is not a consequence of that.
At best, it was a "bad" kscreen setting being restored - which is still not expected to crash the server, though.
Last edited by seth (2023-11-28 09:11:54)
Offline
#5 2023-11-28 22:02:02
- linuxsimpleton43
- Member
- Registered: 2022-03-24
- Posts: 32
Re: X Server fails on startx
Just restored my original home folder and emptied the cache directory (renamed and made empty cache dir) and applied the kernel parameters (and kernel module parameters) but the same issue is occurring. Here is the journalctl log http://0x0.st/Hxim.txt and the Xserver log:
X.Org X Server 1.21.1.9
X Protocol Version 11, Revision 0
[ 21.474] Current Operating System: Linux maincomputer 6.6.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 20 Nov 2023 23:18:21 +0000 x86_64
[ 21.474] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=60cfd490-68c2-468f-8f82-1f7ca303d44b rw amd_pstate=guided msr.allow_writes=on rd.systemd.show_status=auto rd.udev.log_priority=3 vt.global_cursor_default=0 nvidia_drm.modeset=1 initcall_blacklist=simpledrm_platform_driver_init
[ 21.474]
[ 21.474] Current version of pixman: 0.42.2
[ 21.474] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.474] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.474] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 28 17:00:41 2023
[ 21.477] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.477] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.478] (==) No Layout section. Using the first Screen section.
[ 21.478] (==) No screen section available. Using defaults.
[ 21.478] (**) |-->Screen "Default Screen Section" (0)
[ 21.478] (**) | |-->Monitor "<default monitor>"
[ 21.478] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.478] (**) Option "MaxClients" "2048"
[ 21.478] (==) Automatically adding devices
[ 21.478] (==) Automatically enabling devices
[ 21.478] (==) Automatically adding GPU devices
[ 21.478] (==) Automatically binding GPU devices
[ 21.478] (**) Max clients allowed: 2048, resource mask: 0x3ffff
[ 21.483] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 21.483] Entry deleted from font path.
[ 21.485] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 21.485] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.485] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.485] (II) Module ABI versions:
[ 21.485] X.Org ANSI C Emulation: 0.4
[ 21.485] X.Org Video Driver: 25.2
[ 21.485] X.Org XInput driver : 24.4
[ 21.485] X.Org Server Extension : 10.0
[ 21.486] (++) using VT number 1
[ 21.487] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 21.487] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.487] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/drm/card0
[ 21.488] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 21.490] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 21.493] (--) PCI:*(9@0:0:0) 10de:1e84:1458:4001 rev 161, Mem @ 0xfb000000/16777216, 0x7fe0000000/268435456, 0x7ff0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 21.493] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.493] (II) LoadModule: "glx"
[ 21.495] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.502] (II) Module glx: vendor="X.Org Foundation"
[ 21.502] compiled for 1.21.1.9, module version = 1.0.0
[ 21.502] ABI class: X.Org Server Extension, version 10.0
[ 21.502] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 21.502] loading driver: nvidia
[ 21.503] (==) Matched nvidia as autoconfigured driver 0
[ 21.503] (==) Matched nouveau as autoconfigured driver 1
[ 21.503] (==) Matched nv as autoconfigured driver 2
[ 21.503] (==) Matched modesetting as autoconfigured driver 3
[ 21.503] (==) Matched fbdev as autoconfigured driver 4
[ 21.503] (==) Matched vesa as autoconfigured driver 5
[ 21.503] (==) Assigned the driver to the xf86ConfigLayout
[ 21.503] (II) LoadModule: "nvidia"
[ 21.503] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 21.508] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 21.508] compiled for 1.6.99.901, module version = 1.0.0
[ 21.508] Module class: X.Org Video Driver
[ 21.509] (II) LoadModule: "nouveau"
[ 21.509] (WW) Warning, couldn't open module nouveau
[ 21.509] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 21.509] (II) LoadModule: "nv"
[ 21.509] (WW) Warning, couldn't open module nv
[ 21.509] (EE) Failed to load module "nv" (module does not exist, 0)
[ 21.509] (II) LoadModule: "modesetting"
[ 21.509] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.513] (II) Module modesetting: vendor="X.Org Foundation"
[ 21.513] compiled for 1.21.1.9, module version = 1.21.1
[ 21.513] Module class: X.Org Video Driver
[ 21.513] ABI class: X.Org Video Driver, version 25.2
[ 21.513] (II) LoadModule: "fbdev"
[ 21.513] (WW) Warning, couldn't open module fbdev
[ 21.513] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 21.513] (II) LoadModule: "vesa"
[ 21.513] (WW) Warning, couldn't open module vesa
[ 21.513] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 21.513] (II) NVIDIA dlloader X Driver 545.29.06 Thu Nov 16 01:52:34 UTC 2023
[ 21.513] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 21.514] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 21.514] (II) systemd-logind: releasing fd for 226:0
[ 21.652] (II) Loading sub module "fb"
[ 21.652] (II) LoadModule: "fb"
[ 21.652] (II) Module "fb" already built-in
[ 21.652] (II) Loading sub module "wfb"
[ 21.652] (II) LoadModule: "wfb"
[ 21.652] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.653] (II) Module wfb: vendor="X.Org Foundation"
[ 21.653] compiled for 1.21.1.9, module version = 1.0.0
[ 21.653] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.654] (WW) Falling back to old probe method for modesetting
[ 21.791] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.791] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 21.791] (==) NVIDIA(0): RGB weight 888
[ 21.791] (==) NVIDIA(0): Default visual is TrueColor
[ 21.791] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 21.796] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 21.796] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 21.796] (**) NVIDIA(0): Enabling 2D acceleration
[ 21.796] (II) Loading sub module "glxserver_nvidia"
[ 21.796] (II) LoadModule: "glxserver_nvidia"
[ 21.796] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 21.902] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 21.902] compiled for 1.6.99.901, module version = 1.0.0
[ 21.902] Module class: X.Org Server Extension
[ 21.902] (II) NVIDIA GLX Module 545.29.06 Thu Nov 16 01:55:23 UTC 2023
[ 21.903] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 21.904] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[ 21.904] (--) NVIDIA(0): DFP-0
[ 21.904] (--) NVIDIA(0): DFP-1
[ 21.904] (--) NVIDIA(0): DFP-2
[ 21.904] (--) NVIDIA(0): DFP-3 (boot)
[ 21.904] (--) NVIDIA(0): DFP-4
[ 21.904] (--) NVIDIA(0): DFP-5
[ 21.904] (--) NVIDIA(0): DFP-6
[ 21.905] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 2070 SUPER (TU104-A) at
[ 21.905] (II) NVIDIA(0): PCI:9:0:0 (GPU-0)
[ 21.905] (--) NVIDIA(0): Memory: 8388608 kBytes
[ 21.905] (--) NVIDIA(0): VideoBIOS: 90.04.86.00.d1
[ 21.905] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 21.946] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21.946] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 21.946] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 21.946] (--) NVIDIA(GPU-0):
[ 21.946] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 21.946] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 21.946] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 21.947] (--) NVIDIA(GPU-0):
[ 21.947] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 21.947] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 21.947] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 21.947] (--) NVIDIA(GPU-0):
[ 21.947] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): connected
[ 21.947] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): Internal DisplayPort
[ 21.947] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): 2660.0 MHz maximum pixel clock
[ 21.947] (--) NVIDIA(GPU-0):
[ 21.953] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 21.953] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 21.953] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 21.953] (--) NVIDIA(GPU-0):
[ 21.953] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): connected
[ 21.953] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): Internal DisplayPort
[ 21.953] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): 2660.0 MHz maximum pixel clock
[ 21.953] (--) NVIDIA(GPU-0):
[ 21.955] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 21.955] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 21.955] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 21.955] (--) NVIDIA(GPU-0):
[ 22.108] (==) NVIDIA(0):
[ 22.108] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 22.108] (==) NVIDIA(0): will be used as the requested mode.
[ 22.108] (==) NVIDIA(0):
[ 22.115] (II) NVIDIA(0): Validated MetaModes:
[ 22.115] (II) NVIDIA(0): "DFP-3:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 22.115] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 22.415] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 22.415] (--) NVIDIA(0): option
[ 22.415] (II) UnloadModule: "modesetting"
[ 22.415] (II) Unloading modesetting
[ 22.415] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 22.415] (II) NVIDIA: access.
[ 22.422] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 22.422] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 22.422] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 22.422] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 22.422] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 22.422] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 22.422] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 22.422] (II) NVIDIA(0): Config Options in the README.
[ 22.439] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 22.528] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 22.528] (==) NVIDIA(0): Backing store enabled
[ 22.528] (==) NVIDIA(0): Silken mouse enabled
[ 22.528] (==) NVIDIA(0): DPMS enabled
[ 22.528] (II) Loading sub module "dri2"
[ 22.528] (II) LoadModule: "dri2"
[ 22.528] (II) Module "dri2" already built-in
[ 22.528] (II) NVIDIA(0): [DRI2] Setup complete
[ 22.528] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 22.528] (II) Initializing extension Generic Event Extension
[ 22.528] (II) Initializing extension SHAPE
[ 22.528] (II) Initializing extension MIT-SHM
[ 22.529] (II) Initializing extension XInputExtension
[ 22.529] (II) Initializing extension XTEST
[ 22.529] (II) Initializing extension BIG-REQUESTS
[ 22.529] (II) Initializing extension SYNC
[ 22.529] (II) Initializing extension XKEYBOARD
[ 22.529] (II) Initializing extension XC-MISC
[ 22.529] (II) Initializing extension SECURITY
[ 22.529] (II) Initializing extension XFIXES
[ 22.529] (II) Initializing extension RENDER
[ 22.529] (II) Initializing extension RANDR
[ 22.529] (II) Initializing extension COMPOSITE
[ 22.529] (II) Initializing extension DAMAGE
[ 22.529] (II) Initializing extension MIT-SCREEN-SAVER
[ 22.529] (II) Initializing extension DOUBLE-BUFFER
[ 22.529] (II) Initializing extension RECORD
[ 22.529] (II) Initializing extension DPMS
[ 22.529] (II) Initializing extension Present
[ 22.529] (II) Initializing extension DRI3
[ 22.530] (II) Initializing extension X-Resource
[ 22.530] (II) Initializing extension XVideo
[ 22.530] (II) Initializing extension XVideo-MotionCompensation
[ 22.530] (II) Initializing extension GLX
[ 22.530] (II) Initializing extension GLX
[ 22.530] (II) Indirect GLX disabled.
[ 22.530] (II) GLX: Another vendor is already registered for screen 0
[ 22.530] (II) Initializing extension XFree86-VidModeExtension
[ 22.530] (II) Initializing extension XFree86-DGA
[ 22.530] (II) Initializing extension XFree86-DRI
[ 22.530] (II) Initializing extension DRI2
[ 22.530] (II) Initializing extension NV-GLX
[ 22.530] (II) Initializing extension NV-CONTROL
[ 22.531] (II) Initializing extension XINERAMA
[ 22.628] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 22.628] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 22.628] (II) LoadModule: "libinput"
[ 22.628] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 22.632] (II) Module libinput: vendor="X.Org Foundation"
[ 22.632] compiled for 1.21.1.8, module version = 1.4.0
[ 22.632] Module class: X.Org XInput Driver
[ 22.632] ABI class: X.Org XInput driver, version 24.4
[ 22.632] (II) Using input driver 'libinput' for 'Power Button'
[ 22.632] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 42 paused 0
[ 22.632] (**) Power Button: always reports core events
[ 22.632] (**) Option "Device" "/dev/input/event1"
[ 22.642] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 22.642] (II) event1 - Power Button: device is a keyboard
[ 22.642] (II) event1 - Power Button: device removed
[ 22.642] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 22.642] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 22.642] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 22.643] (II) event1 - Power Button: device is a keyboard
[ 22.643] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 22.643] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 22.643] (II) Using input driver 'libinput' for 'Power Button'
[ 22.643] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 45 paused 0
[ 22.643] (**) Power Button: always reports core events
[ 22.643] (**) Option "Device" "/dev/input/event0"
[ 22.644] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 22.644] (II) event0 - Power Button: device is a keyboard
[ 22.644] (II) event0 - Power Button: device removed
[ 22.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 22.644] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 22.645] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 22.645] (II) event0 - Power Button: device is a keyboard
[ 22.645] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[ 22.645] (II) No input driver specified, ignoring this device.
[ 22.645] (II) This device may have been added with another device file.
[ 22.646] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[ 22.646] (II) No input driver specified, ignoring this device.
[ 22.646] (II) This device may have been added with another device file.
[ 22.646] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[ 22.646] (II) No input driver specified, ignoring this device.
[ 22.646] (II) This device may have been added with another device file.
[ 22.646] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[ 22.646] (II) No input driver specified, ignoring this device.
[ 22.646] (II) This device may have been added with another device file.
[ 22.647] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard (/dev/input/event4)
[ 22.647] (**) BY Tech Usb Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 22.647] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard'
[ 22.648] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 46 paused 0
[ 22.648] (**) BY Tech Usb Gaming Keyboard: always reports core events
[ 22.648] (**) Option "Device" "/dev/input/event4"
[ 22.649] (II) event4 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 22.649] (II) event4 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 22.649] (II) event4 - BY Tech Usb Gaming Keyboard: device removed
[ 22.649] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.0/0003:258A:002A.0002/input/input4/event4"
[ 22.649] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard" (type: KEYBOARD, id 8)
[ 22.650] (II) event4 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 22.650] (II) event4 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 22.651] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Consumer Control (/dev/input/event10)
[ 22.651] (**) BY Tech Usb Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 22.651] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Consumer Control'
[ 22.652] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 47 paused 0
[ 22.652] (**) BY Tech Usb Gaming Keyboard Consumer Control: always reports core events
[ 22.652] (**) Option "Device" "/dev/input/event10"
[ 22.653] (II) event10 - BY Tech Usb Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 22.653] (II) event10 - BY Tech Usb Gaming Keyboard Consumer Control: device is a keyboard
[ 22.653] (II) event10 - BY Tech Usb Gaming Keyboard Consumer Control: device removed
[ 22.653] (II) libinput: BY Tech Usb Gaming Keyboard Consumer Control: needs a virtual subdevice
[ 22.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input10/event10"
[ 22.653] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Consumer Control" (type: MOUSE, id 9)
[ 22.653] (**) Option "AccelerationScheme" "none"
[ 22.653] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[ 22.653] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 22.653] (**) BY Tech Usb Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 22.654] (II) event10 - BY Tech Usb Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 22.654] (II) event10 - BY Tech Usb Gaming Keyboard Consumer Control: device is a keyboard
[ 22.655] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard (/dev/input/event11)
[ 22.655] (**) BY Tech Usb Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 22.655] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard'
[ 22.656] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 48 paused 0
[ 22.656] (**) BY Tech Usb Gaming Keyboard: always reports core events
[ 22.656] (**) Option "Device" "/dev/input/event11"
[ 22.657] (II) event11 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 22.657] (II) event11 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 22.657] (II) event11 - BY Tech Usb Gaming Keyboard: device removed
[ 22.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input12/event11"
[ 22.657] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard" (type: KEYBOARD, id 10)
[ 22.658] (II) event11 - BY Tech Usb Gaming Keyboard: is tagged by udev as: Keyboard
[ 22.658] (II) event11 - BY Tech Usb Gaming Keyboard: device is a keyboard
[ 22.659] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Mouse (/dev/input/event12)
[ 22.659] (**) BY Tech Usb Gaming Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[ 22.659] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Mouse'
[ 22.660] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 49 paused 0
[ 22.660] (**) BY Tech Usb Gaming Keyboard Mouse: always reports core events
[ 22.660] (**) Option "Device" "/dev/input/event12"
[ 22.661] (II) event12 - BY Tech Usb Gaming Keyboard Mouse: is tagged by udev as: Mouse
[ 22.661] (II) event12 - BY Tech Usb Gaming Keyboard Mouse: device is a pointer
[ 22.661] (II) event12 - BY Tech Usb Gaming Keyboard Mouse: device removed
[ 22.661] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.661] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.661] (II) libinput: BY Tech Usb Gaming Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.661] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input13/event12"
[ 22.661] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Mouse" (type: MOUSE, id 11)
[ 22.661] (**) Option "AccelerationScheme" "none"
[ 22.661] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) selected scheme none/0
[ 22.661] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) acceleration factor: 2.000
[ 22.661] (**) BY Tech Usb Gaming Keyboard Mouse: (accel) acceleration threshold: 4
[ 22.662] (II) event12 - BY Tech Usb Gaming Keyboard Mouse: is tagged by udev as: Mouse
[ 22.663] (II) event12 - BY Tech Usb Gaming Keyboard Mouse: device is a pointer
[ 22.663] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard Mouse (/dev/input/mouse0)
[ 22.663] (II) No input driver specified, ignoring this device.
[ 22.663] (II) This device may have been added with another device file.
[ 22.664] (II) config/udev: Adding input device BY Tech Usb Gaming Keyboard System Control (/dev/input/event9)
[ 22.664] (**) BY Tech Usb Gaming Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 22.664] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard System Control'
[ 22.664] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 50 paused 0
[ 22.664] (**) BY Tech Usb Gaming Keyboard System Control: always reports core events
[ 22.664] (**) Option "Device" "/dev/input/event9"
[ 22.666] (II) event9 - BY Tech Usb Gaming Keyboard System Control: is tagged by udev as: Keyboard
[ 22.666] (II) event9 - BY Tech Usb Gaming Keyboard System Control: device is a keyboard
[ 22.666] (II) event9 - BY Tech Usb Gaming Keyboard System Control: device removed
[ 22.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input9/event9"
[ 22.666] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard System Control" (type: KEYBOARD, id 12)
[ 22.667] (II) event9 - BY Tech Usb Gaming Keyboard System Control: is tagged by udev as: Keyboard
[ 22.667] (II) event9 - BY Tech Usb Gaming Keyboard System Control: device is a keyboard
[ 22.668] (II) config/udev: Adding input device C-Media Electronics Inc. USB Advanced Audio Device Consumer Control (/dev/input/event20)
[ 22.668] (**) C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 22.668] (II) Using input driver 'libinput' for 'C-Media Electronics Inc. USB Advanced Audio Device Consumer Control'
[ 22.668] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 51 paused 0
[ 22.668] (**) C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: always reports core events
[ 22.668] (**) Option "Device" "/dev/input/event20"
[ 22.670] (II) event20 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: is tagged by udev as: Keyboard
[ 22.670] (II) event20 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: device is a keyboard
[ 22.670] (II) event20 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: device removed
[ 22.670] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.2/7-3.2:1.3/0003:0D8C:016C.0004/input/input21/event20"
[ 22.670] (II) XINPUT: Adding extended input device "C-Media Electronics Inc. USB Advanced Audio Device Consumer Control" (type: KEYBOARD, id 13)
[ 22.671] (II) event20 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: is tagged by udev as: Keyboard
[ 22.671] (II) event20 - C-Media Electronics Inc. USB Advanced Audio Device Consumer Control: device is a keyboard
[ 22.672] (II) config/udev: Adding input device Logitech MX Master (/dev/input/event21)
[ 22.672] (**) Logitech MX Master: Applying InputClass "libinput pointer catchall"
[ 22.672] (**) Logitech MX Master: Applying InputClass "libinput keyboard catchall"
[ 22.672] (II) Using input driver 'libinput' for 'Logitech MX Master'
[ 22.673] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 52 paused 0
[ 22.673] (**) Logitech MX Master: always reports core events
[ 22.673] (**) Option "Device" "/dev/input/event21"
[ 22.674] (II) event21 - Logitech MX Master: is tagged by udev as: Keyboard Mouse
[ 22.674] (II) event21 - Logitech MX Master: device is a pointer
[ 22.674] (II) event21 - Logitech MX Master: device is a keyboard
[ 22.674] (II) event21 - Logitech MX Master: device removed
[ 22.674] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.674] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.674] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.674] (II) libinput: Logitech MX Master: needs a virtual subdevice
[ 22.674] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input33/event21"
[ 22.674] (II) XINPUT: Adding extended input device "Logitech MX Master" (type: MOUSE, id 14)
[ 22.674] (**) Option "AccelerationScheme" "none"
[ 22.674] (**) Logitech MX Master: (accel) selected scheme none/0
[ 22.674] (**) Logitech MX Master: (accel) acceleration factor: 2.000
[ 22.674] (**) Logitech MX Master: (accel) acceleration threshold: 4
[ 22.676] (II) event21 - Logitech MX Master: is tagged by udev as: Keyboard Mouse
[ 22.676] (II) event21 - Logitech MX Master: device is a pointer
[ 22.676] (II) event21 - Logitech MX Master: device is a keyboard
[ 22.677] (II) config/udev: Adding input device Logitech MX Master (/dev/input/mouse1)
[ 22.677] (II) No input driver specified, ignoring this device.
[ 22.677] (II) This device may have been added with another device file.
[ 22.677] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event13)
[ 22.677] (II) No input driver specified, ignoring this device.
[ 22.677] (II) This device may have been added with another device file.
[ 22.677] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event14)
[ 22.677] (II) No input driver specified, ignoring this device.
[ 22.677] (II) This device may have been added with another device file.
[ 22.678] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event15)
[ 22.678] (II) No input driver specified, ignoring this device.
[ 22.678] (II) This device may have been added with another device file.
[ 22.678] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event16)
[ 22.678] (II) No input driver specified, ignoring this device.
[ 22.678] (II) This device may have been added with another device file.
[ 22.678] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event17)
[ 22.678] (II) No input driver specified, ignoring this device.
[ 22.678] (II) This device may have been added with another device file.
[ 22.679] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event18)
[ 22.679] (II) No input driver specified, ignoring this device.
[ 22.679] (II) This device may have been added with another device file.
[ 22.679] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event19)
[ 22.679] (II) No input driver specified, ignoring this device.
[ 22.679] (II) This device may have been added with another device file.
[ 22.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
[ 22.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 22.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 22.680] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 53 paused 0
[ 22.680] (**) Eee PC WMI hotkeys: always reports core events
[ 22.680] (**) Option "Device" "/dev/input/event3"
[ 22.680] (II) event3 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 22.680] (II) event3 - Eee PC WMI hotkeys: device is a keyboard
[ 22.680] (II) event3 - Eee PC WMI hotkeys: device removed
[ 22.680] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input3/event3"
[ 22.680] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
[ 22.681] (II) event3 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 22.681] (II) event3 - Eee PC WMI hotkeys: device is a keyboard
[ 22.681] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 22.681] (II) No input driver specified, ignoring this device.
[ 22.681] (II) This device may have been added with another device file.
[ 22.683] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event22)
[ 22.683] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[ 22.683] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[ 22.684] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 54 paused 0
[ 22.684] (**) LogiOps Virtual Input: always reports core events
[ 22.684] (**) Option "Device" "/dev/input/event22"
[ 22.684] (II) event22 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[ 22.684] (II) event22 - LogiOps Virtual Input: device is a keyboard
[ 22.684] (II) event22 - LogiOps Virtual Input: device removed
[ 22.684] (**) Option "config_info" "udev:/sys/devices/virtual/input/input34/event22"
[ 22.684] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 16)
[ 22.685] (II) event22 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[ 22.685] (II) event22 - LogiOps Virtual Input: device is a keyboard
[ 22.688] (**) BY Tech Usb Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 22.688] (II) Using input driver 'libinput' for 'BY Tech Usb Gaming Keyboard Consumer Control'
[ 22.688] (II) systemd-logind: returning pre-existing fd for /dev/input/event10 13:74
[ 22.688] (**) BY Tech Usb Gaming Keyboard Consumer Control: always reports core events
[ 22.688] (**) Option "Device" "/dev/input/event10"
[ 22.688] (II) libinput: BY Tech Usb Gaming Keyboard Consumer Control: is a virtual subdevice
[ 22.688] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.1/7-3.1:1.1/0003:258A:002A.0003/input/input10/event10"
[ 22.688] (II) XINPUT: Adding extended input device "BY Tech Usb Gaming Keyboard Consumer Control" (type: KEYBOARD, id 17)
[ 22.688] (**) Logitech MX Master: Applying InputClass "libinput pointer catchall"
[ 22.688] (**) Logitech MX Master: Applying InputClass "libinput keyboard catchall"
[ 22.688] (II) Using input driver 'libinput' for 'Logitech MX Master'
[ 22.688] (II) systemd-logind: returning pre-existing fd for /dev/input/event21 13:85
[ 22.688] (**) Logitech MX Master: always reports core events
[ 22.688] (**) Option "Device" "/dev/input/event21"
[ 22.688] (II) libinput: Logitech MX Master: is a virtual subdevice
[ 22.688] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.688] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.688] (II) libinput: Logitech MX Master: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.688] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb7/7-3/7-3.4/7-3.4.4/7-3.4.4:1.2/0003:046D:C52B.0007/0003:046D:4071.0008/input/input33/event21"
[ 22.688] (II) XINPUT: Adding extended input device "Logitech MX Master" (type: KEYBOARD, id 18)
[ 24.091] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 24.091] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 24.091] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 24.091] (--) NVIDIA(GPU-0):
[ 24.092] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 24.092] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 24.092] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 24.092] (--) NVIDIA(GPU-0):
[ 24.092] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 24.092] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 24.092] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 24.092] (--) NVIDIA(GPU-0):
[ 24.092] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): connected
[ 24.092] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): Internal DisplayPort
[ 24.092] (--) NVIDIA(GPU-0): Dell S2419HGF (DFP-3): 2660.0 MHz maximum pixel clock
[ 24.092] (--) NVIDIA(GPU-0):
[ 24.098] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 24.098] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 24.098] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 24.098] (--) NVIDIA(GPU-0):
[ 24.098] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): connected
[ 24.098] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): Internal DisplayPort
[ 24.098] (--) NVIDIA(GPU-0): HP Inc. HP X24ih (DFP-5): 2660.0 MHz maximum pixel clock
[ 24.098] (--) NVIDIA(GPU-0):
[ 24.100] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 24.100] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[ 24.100] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[ 24.100] (--) NVIDIA(GPU-0):
[ 24.913] (EE)
[ 24.913] (EE) Backtrace:
[ 24.914] (EE) 0: /usr/lib/Xorg (dri3_send_open_reply+0xdd) [0x55ff1f3a540d]
[ 24.914] (EE) 1: /usr/lib64/libc.so.6 (__sigaction+0x50) [0x7fd57ebe0710]
[ 24.914] (EE) 2: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x7db09) [0x7fd57d6e96c9]
[ 24.914] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x8548b) [0x7fd57d6f104b]
[ 24.915] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x85369) [0x7fd57d6f0f29]
[ 24.915] (EE) 5: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x6c51a) [0x7fd57d6d80da]
[ 24.915] (EE) 6: /usr/lib/xorg/modules/drivers/nvidia_drv.so (nvidiaUnlock+0x43f2ec) [0x7fd57daaaeac]
[ 24.915] (EE) 7: ? (?+0x0) [0x0]
[ 24.915] (EE) unw_step failed: unspecified (general) error [-1]
[ 24.915] (EE)
[ 24.915] (EE) Segmentation fault at address 0x10
[ 24.915] (EE)
Fatal server error:
[ 24.915] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 24.915] (EE)
[ 24.915] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 24.915] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 24.915] (EE)
[ 25.353] (EE) Server terminated with error (1). Closing log file.Offline
#6 2023-11-28 22:46:59
- seth
- Member
- Registered: 2012-09-03
- Posts: 54,562
Re: X Server fails on startx
The kscreen stuff is in ~/.local/share/kscreen/
Offline
#7 2023-11-29 00:40:14
- linuxsimpleton43
- Member
- Registered: 2022-03-24
- Posts: 32
Re: X Server fails on startx
Thats not the issue either as I had removed the kscreen dir before and it hasn't been regenerated since.
Offline
#8 2023-11-29 08:12:10
- seth
- Member
- Registered: 2012-09-03
- Posts: 54,562
Re: X Server fails on startx
The trace looks like the result of some form of output manipulation (any xrandr calls in some autostart directory?) but maybe you're running into some permission error?
find $HOME \! -user $USER -printOffline
#9 2023-12-03 05:36:05
- linuxsimpleton43
- Member
- Registered: 2022-03-24
- Posts: 32
Re: X Server fails on startx
I ended up taking the nuclear option and just switched from kde plasma to i3. No more issues and I kinda prefer i3 anyways.
Offline
Pages: 1