You are not logged in.
- Topics: Active | Unanswered
#1 2023-12-04 11:38:40
- turingmach
- Member
- Registered: 2023-11-12
- Posts: 6
[SOLVED] Pipewire and wireplumber not working correctly
So I have been running my system for over a year at this point and have been using pipewire and pipewire-media-session fine since I ran into this wireplumber issue before. Whenever I install and use wireplumber, videos on firefox stop playing and vlc videos stutter badly. It seems very similar to this issue (https://bbs.archlinux.org/viewtopic.php?id=277133) and other similar issues, since pipewire-media-session fixes the problem and youtube fails in the same way. My issue is that I am definitely not running pulseaudio which seemed to apply in the linked post:
> pacman -Qsq pulseaudio
pipewire-alsa
pipewire-pulse
plasma-pa
> pacman -Qsq pipewire
kpipewire
lib32-libpipewire
lib32-pipewire
libpipewire
libwireplumber
pipewire
pipewire-audio
pipewire-jack
pipewire-pulse
wireplumberPlease let me know if you have any wisdom on this issue or want to see specific logs!
Last edited by turingmach (2023-12-08 11:02:54)
Offline
#2 2023-12-04 18:02:55
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,836
Re: [SOLVED] Pipewire and wireplumber not working correctly
Did you reboot after switching or properly start p
Wireplumber instead of pipewire-media-session?
What do you get from
sudo fuser -v /dev/snd/*
systemctl --user status pipewire{,-media-session,-pulse} wireplumber Offline
#3 2023-12-05 09:02:32
- turingmach
- Member
- Registered: 2023-11-12
- Posts: 6
Re: [SOLVED] Pipewire and wireplumber not working correctly
Thanks for the follow up! I have rebooted multiple times and also tried to manually restart the services so any combination of that wouldn't work from what I can tell...
Here is the output to the commands you posted after reinstalling wireplumber and rebooting:
> sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: turingmach 736 F.... wireplumber
/dev/snd/controlC1: turingmach 736 F.... wireplumber
/dev/snd/controlC2: turingmach 736 F.... wireplumber
/dev/snd/pcmC2D0p: turingmach 735 F...m pipewire
/dev/snd/seq: turingmach 735 F.... pipewire
> systemctl --user status pipewire{,-media-session,-pulse} wireplumber
Unit pipewire-media-session.service could not be found.
● pipewire.service - PipeWire Multimedia Service
Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
Active: active (running) since Tue 2023-12-05 19:54:24 AEDT; 3min 31s ago
TriggeredBy: ● pipewire.socket
Main PID: 735 (pipewire)
Tasks: 2 (limit: 38392)
Memory: 11.7M
CPU: 1.092s
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
└─735 /usr/bin/pipewire
Dec 05 19:54:24 turingmach-desktop systemd[727]: Started PipeWire Multimedia Service.
● pipewire-pulse.service - PipeWire PulseAudio
Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; disabled; preset: enabled)
Active: active (running) since Tue 2023-12-05 19:54:40 AEDT; 3min 17s ago
TriggeredBy: ● pipewire-pulse.socket
Main PID: 1212 (pipewire-pulse)
Tasks: 2 (limit: 38392)
Memory: 8.8M
CPU: 2.049s
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
└─1212 /usr/bin/pipewire-pulse
Dec 05 19:54:40 turingmach-desktop systemd[727]: Started PipeWire PulseAudio.
● wireplumber.service - Multimedia Service Session Manager
Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
Active: active (running) since Tue 2023-12-05 19:54:24 AEDT; 3min 32s ago
Main PID: 736 (wireplumber)
Tasks: 6 (limit: 38392)
Memory: 103.9M
CPU: 937ms
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
└─736 /usr/bin/wireplumber
Dec 05 19:54:25 turingmach-desktop wireplumber[736]: [0:00:32.183892144] [736] ERROR IPAModule ipa_module.cpp:172 Symbol ipaModuleInfo not found
Dec 05 19:54:25 turingmach-desktop wireplumber[736]: [0:00:32.183907874] [736] ERROR IPAModule ipa_module.cpp:292 v4l2-compat.so: IPA module has no valid info
Dec 05 19:54:25 turingmach-desktop wireplumber[736]: [0:00:32.183941437] [736] INFO Camera camera_manager.cpp:284 libcamera v0.1.0
Dec 05 19:54:25 turingmach-desktop wireplumber[736]: The decibel volume range for element 'Speaker' (-4000 dB - -500 dB) has negative maximum. Disabling the decibel range.
Dec 05 19:54:25 turingmach-desktop wireplumber[736]: The decibel volume range for element 'Speaker' (-4000 dB - -500 dB) has negative maximum. Disabling the decibel range.Offline
#4 2023-12-05 21:00:30
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,836
Re: [SOLVED] Pipewire and wireplumber not working correctly
That looks like it should. Output of
pactl list cards
pactl list sinks
pactl list sink-inputsduring the faulty situation?
Offline
#5 2023-12-05 23:34:59
- turingmach
- Member
- Registered: 2023-11-12
- Posts: 6
Re: [SOLVED] Pipewire and wireplumber not working correctly
No worries:
> pactl list cards
Card #39
Name: alsa_card.usb-fifine_Microphones_fifine_Microphone_REV1.0-00
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.card.longname = "fifine Microphones fifine Microphone at usb-0000:02:00.0-10, full speed"
api.alsa.card.name = "fifine Microphone"
api.alsa.path = "hw:2"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
device.api = "alsa"
device.bus = "usb"
device.bus-id = "usb-fifine_Microphones_fifine_Microphone_REV1.0-00"
device.bus_path = "pci-0000:02:00.0-usb-0:10:1.0"
device.description = "fifine Microphone"
device.enum.api = "udev"
device.form_factor = "microphone"
device.icon_name = "audio-input-microphone-analog-usb"
device.name = "alsa_card.usb-fifine_Microphones_fifine_Microphone_REV1.0-00"
device.nick = "fifine Microphone"
device.plugged.usec = "10929325"
device.product.id = "0x00a8"
device.product.name = "fifine Microphone"
device.serial = "fifine_Microphones_fifine_Microphone_REV1.0"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10:1.0/sound/card2"
device.vendor.id = "0x3142"
device.vendor.name = "fifine Microphones"
media.class = "Audio/Device"
factory.id = "14"
client.id = "32"
object.id = "39"
object.serial = "39"
object.path = "alsa:pcm:2"
alsa.card = "2"
alsa.card_name = "fifine Microphone"
alsa.long_card_name = "fifine Microphones fifine Microphone at usb-0000:02:00.0-10, full speed"
alsa.driver_name = "snd_usb_audio"
device.string = "2"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6555, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: yes)
output:iec958-ac3-surround-51+input:iec958-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 355, available: yes)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
port.type = "mic"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "1"
Part of profile(s): input:iec958-stereo, output:analog-stereo+input:iec958-stereo, output:iec958-stereo+input:iec958-stereo, output:iec958-ac3-surround-51+input:iec958-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: -10000 usec, availability unknown)
Properties:
port.type = "speaker"
device.icon_name = "audio-speakers"
card.profile.port = "2"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:iec958-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "3"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-stereo+input:iec958-stereo
Card #40
Name: alsa_card.pci-0000_0b_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA ATI HDMI at 0xfe420000 irq 87"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:0b:00.1"
device.description = "Navi 21/23 HDMI/DP Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0b_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "10674440"
device.product.id = "0xab28"
device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
media.class = "Audio/Device"
factory.id = "14"
client.id = "32"
object.id = "40"
object.serial = "40"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfe420000 irq 87"
alsa.driver_name = "snd_hda_intel"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 5, sources: 0, priority: 1, available: yes)
Active Profile: pro-audio
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 5"
device.icon_name = "video-display"
card.profile.port = "4"
device.product.name = "VG27A"
Part of profile(s): output:hdmi-stereo-extra4
Card #41
Name: alsa_card.pci-0000_0d_00.3
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HD-Audio Generic at 0xfe800000 irq 88"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "hw:1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:0d:00.3"
device.description = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0d_00.3"
device.nick = "HD-Audio Generic"
device.plugged.usec = "10695180"
device.product.id = "0x1457"
device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1"
device.vendor.id = "0x1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
media.class = "Audio/Device"
factory.id = "14"
client.id = "32"
object.id = "41"
object.serial = "41"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfe800000 irq 88"
alsa.driver_name = "snd_hda_intel"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
Active Profile: output:iec958-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
card.profile.port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
card.profile.port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "5"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo> pactl list sinks
Sink #42
State: RUNNING
Name: alsa_output.usb-fifine_Microphones_fifine_Microphone_REV1.0-00.analog-stereo
Description: fifine Microphone Analog Stereo
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 3745 / 6% / -74.58 dB, front-right: 3745 / 6% / -74.58 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-fifine_Microphones_fifine_Microphone_REV1.0-00.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "fifine Microphone"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "fifine Microphones fifine Microphone at usb-0000:02:00.0-10, full speed"
alsa.name = "USB Audio"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "fifine Microphones fifine Microphone at usb-0000:02:00.0-10, full speed"
api.alsa.card.name = "fifine Microphone"
api.alsa.path = "front:2"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.id = "39"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "fifine Microphone"
node.name = "alsa_output.usb-fifine_Microphones_fifine_Microphone_REV1.0-00.analog-stereo"
node.nick = "fifine Microphone"
node.pause-on-idle = "false"
object.path = "alsa:pcm:2:front:2:playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "42"
object.serial = "42"
node.max-latency = "16384/48000"
api.alsa.period-size = "512"
api.alsa.period-num = "64"
api.alsa.headroom = "512"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
device.bus = "usb"
device.bus-id = "usb-fifine_Microphones_fifine_Microphone_REV1.0-00"
device.bus_path = "pci-0000:02:00.0-usb-0:10:1.0"
device.enum.api = "udev"
device.form_factor = "microphone"
device.icon_name = "audio-input-microphone-analog-usb"
device.name = "alsa_card.usb-fifine_Microphones_fifine_Microphone_REV1.0-00"
device.nick = "fifine Microphone"
device.plugged.usec = "10929325"
device.product.id = "0x00a8"
device.product.name = "fifine Microphone"
device.serial = "fifine_Microphones_fifine_Microphone_REV1.0"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-10/1-10:1.0/sound/card2"
device.vendor.id = "0x3142"
device.vendor.name = "fifine Microphones"
device.string = "2"
Ports:
analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability unknown)
Active Port: analog-output-speaker
Formats:
pcm
Sink #44
State: SUSPENDED
Name: alsa_output.pci-0000_0b_00.1.pro-output-3
Description: Navi 21/23 HDMI/DP Audio Controller Pro
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB, aux4: 65536 / 100% / 0.00 dB, aux5: 65536 / 100% / 0.00 dB, aux6: 65536 / 100% / 0.00 dB, aux7: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_00.1.pro-output-3.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA ATI HDMI at 0xfe420000 irq 87"
alsa.name = "HDMI 0"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI HDMI at 0xfe420000 irq 87"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:0,3"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "0"
clock.name = "api.alsa.0"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Pro"
device.profile.name = "pro-output-3"
device.profile.pro = "true"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Navi 21/23 HDMI/DP Audio Controller"
node.name = "alsa_output.pci-0000_0b_00.1.pro-output-3"
node.nick = "HDMI 0"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,3:playback"
priority.driver = "1196"
priority.session = "1196"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "44"
object.serial = "44"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:0b:00.1"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0b_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "10674440"
device.product.id = "0xab28"
device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.string = "0"
Formats:
pcm
Sink #45
State: SUSPENDED
Name: alsa_output.pci-0000_0b_00.1.pro-output-7
Description: Navi 21/23 HDMI/DP Audio Controller Pro 7
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB, aux4: 65536 / 100% / 0.00 dB, aux5: 65536 / 100% / 0.00 dB, aux6: 65536 / 100% / 0.00 dB, aux7: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_00.1.pro-output-7.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.class = "generic"
alsa.device = "7"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 1"
alsa.long_card_name = "HDA ATI HDMI at 0xfe420000 irq 87"
alsa.name = "HDMI 1"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI HDMI at 0xfe420000 irq 87"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:0,7"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "1"
clock.name = "api.alsa.0"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Pro 7"
device.profile.name = "pro-output-7"
device.profile.pro = "true"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Navi 21/23 HDMI/DP Audio Controller"
node.name = "alsa_output.pci-0000_0b_00.1.pro-output-7"
node.nick = "HDMI 1"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,7:playback"
priority.driver = "1132"
priority.session = "1132"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "45"
object.serial = "45"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:0b:00.1"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0b_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "10674440"
device.product.id = "0xab28"
device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.string = "0"
Formats:
pcm
Sink #46
State: SUSPENDED
Name: alsa_output.pci-0000_0b_00.1.pro-output-8
Description: Navi 21/23 HDMI/DP Audio Controller Pro 8
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB, aux4: 65536 / 100% / 0.00 dB, aux5: 65536 / 100% / 0.00 dB, aux6: 65536 / 100% / 0.00 dB, aux7: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_00.1.pro-output-8.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.class = "generic"
alsa.device = "8"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 2"
alsa.long_card_name = "HDA ATI HDMI at 0xfe420000 irq 87"
alsa.name = "HDMI 2"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI HDMI at 0xfe420000 irq 87"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:0,8"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "2"
clock.name = "api.alsa.0"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Pro 8"
device.profile.name = "pro-output-8"
device.profile.pro = "true"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Navi 21/23 HDMI/DP Audio Controller"
node.name = "alsa_output.pci-0000_0b_00.1.pro-output-8"
node.nick = "HDMI 2"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,8:playback"
priority.driver = "1116"
priority.session = "1116"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "46"
object.serial = "46"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:0b:00.1"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0b_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "10674440"
device.product.id = "0xab28"
device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.string = "0"
Formats:
pcm
Sink #47
State: SUSPENDED
Name: alsa_output.pci-0000_0b_00.1.pro-output-9
Description: Navi 21/23 HDMI/DP Audio Controller Pro 9
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB, aux2: 65536 / 100% / 0.00 dB, aux3: 65536 / 100% / 0.00 dB, aux4: 65536 / 100% / 0.00 dB, aux5: 65536 / 100% / 0.00 dB, aux6: 65536 / 100% / 0.00 dB, aux7: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_00.1.pro-output-9.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.class = "generic"
alsa.device = "9"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 3"
alsa.long_card_name = "HDA ATI HDMI at 0xfe420000 irq 87"
alsa.name = "HDMI 3"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI HDMI at 0xfe420000 irq 87"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:0,9"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "3"
clock.name = "api.alsa.0"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Pro 9"
device.profile.name = "pro-output-9"
device.profile.pro = "true"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Navi 21/23 HDMI/DP Audio Controller"
node.name = "alsa_output.pci-0000_0b_00.1.pro-output-9"
node.nick = "HDMI 3"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,9:playback"
priority.driver = "1100"
priority.session = "1100"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "47"
object.serial = "47"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:0b:00.1"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0b_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "10674440"
device.product.id = "0xab28"
device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.string = "0"
Formats:
pcm
Sink #48
State: SUSPENDED
Name: alsa_output.pci-0000_0b_00.1.pro-output-10
Description: Navi 21/23 HDMI/DP Audio Controller Pro 10
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: aux0,aux1
Owner Module: 4294967295
Mute: no
Volume: aux0: 65536 / 100% / 0.00 dB, aux1: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_00.1.pro-output-10.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.class = "generic"
alsa.device = "10"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 4"
alsa.long_card_name = "HDA ATI HDMI at 0xfe420000 irq 87"
alsa.name = "VG27A"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA ATI HDMI at 0xfe420000 irq 87"
api.alsa.card.name = "HDA ATI HDMI"
api.alsa.path = "hw:0,10"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "AUX0,AUX1"
card.profile.device = "4"
clock.name = "api.alsa.0"
device.api = "alsa"
device.class = "sound"
device.id = "40"
device.profile.description = "Pro 10"
device.profile.name = "pro-output-10"
device.profile.pro = "true"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Navi 21/23 HDMI/DP Audio Controller"
node.name = "alsa_output.pci-0000_0b_00.1.pro-output-10"
node.nick = "VG27A"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:hw:0,10:playback"
priority.driver = "1084"
priority.session = "1084"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "48"
object.serial = "48"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:0b:00.1"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0b_00.1"
device.nick = "HDA ATI HDMI"
device.plugged.usec = "10674440"
device.product.id = "0xab28"
device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0"
device.vendor.id = "0x1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.string = "0"
Formats:
pcm
Sink #49
State: SUSPENDED
Name: alsa_output.pci-0000_0d_00.3.iec958-stereo
Description: Family 17h (Models 00h-0fh) HD Audio Controller Digital Stereo (IEC958)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26214 / 40% / -23.88 dB, front-right: 26214 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0d_00.3.iec958-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.device = "1"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC887-VD Digital"
alsa.long_card_name = "HD-Audio Generic at 0xfe800000 irq 88"
alsa.name = "ALC887-VD Digital"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HD-Audio Generic at 0xfe800000 irq 88"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "iec958:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "6"
device.api = "alsa"
device.class = "sound"
device.id = "41"
device.profile.description = "Digital Stereo (IEC958)"
device.profile.name = "iec958-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Family 17h (Models 00h-0fh) HD Audio Controller"
node.name = "alsa_output.pci-0000_0d_00.3.iec958-stereo"
node.nick = "ALC887-VD Digital"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:iec958:1:playback"
priority.driver = "736"
priority.session = "736"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "32"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "49"
object.serial = "49"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:0d:00.3"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0d_00.3"
device.nick = "HD-Audio Generic"
device.plugged.usec = "10695180"
device.product.id = "0x1457"
device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1"
device.vendor.id = "0x1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.string = "1"
Ports:
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
Active Port: iec958-stereo-output
Formats:
pcm> pactl list sink-inputs
Sink Input #157
Driver: PipeWire
Owner Module: n/a
Client: 141
Sink: 42
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 58252 / 89% / -3.07 dB, front-right: 58252 / 89% / -3.07 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Firefox"
application.process.id = "1320"
application.process.user = "turingmach"
application.process.host = "turingmach-desktop"
application.process.binary = "firefox"
application.language = "C.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7d37b56891e64b9ea333c492e1a216bc"
application.process.session_id = "1"
media.name = "(2) Hooverphonic - Mad About U (Kcik Edit) - YouTube"
node.rate = "1/48000"
node.latency = "3600/48000"
stream.is-live = "true"
node.name = "Firefox"
node.want-driver = "true"
node.autoconnect = "true"
media.class = "Stream/Output/Audio"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "6"
clock.quantum-limit = "8192"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
client.id = "141"
object.id = "142"
object.serial = "157"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "48000"
pulse.attr.prebuf = "38408"
pulse.attr.minreq = "9600"
module-stream-restore.id = "sink-input-by-application-name:Firefox"Offline
#6 2023-12-06 10:03:49
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,836
Re: [SOLVED] Pipewire and wireplumber not working correctly
You're "playing back" on your microphone. I'm assuming that's not intentional.
pactl set-default alsa_output.pci-0000_0d_00.3.iec958-stereo
#If you don't actual have a digital output and need to switch the profile as well
pactl set-card-profile alsa_output.pci-0000_0d_00 output:analog-stereo+input:analog-stereoGenerally if you want a visual rerpesentation of this all of that should be visible in e.g. pavucontrol and you need to make sure your stuff plays to the correct devices.
Offline
#7 2023-12-07 09:38:46
- turingmach
- Member
- Registered: 2023-11-12
- Posts: 6
Re: [SOLVED] Pipewire and wireplumber not working correctly
Funnily enough it is intentional. My microphone has a headphone jack that I plug my headset into since the cable is short. I should have mentioned that before sorry!
This is with wireplumber replaced with (the working config) pipewire-media-session.
> pactl list sinks | grep -B 2 Name
Sink #47
State: RUNNING
Name: alsa_output.usb-fifine_Microphones_fifine_Microphone_REV1.0-00.analog-stereo
--
Sink #49
State: SUSPENDED
Name: alsa_output.pci-0000_0b_00.1.hdmi-stereo-extra4
--
Sink #50
State: SUSPENDED
Name: alsa_output.pci-0000_0d_00.3.iec958-stereoLast edited by turingmach (2023-12-07 09:44:59)
Offline
#8 2023-12-07 10:35:43
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,836
Re: [SOLVED] Pipewire and wireplumber not working correctly
Alright then maybe take out the broadsword/delete the wireplumber cache/config in ~/.local/state/wireplumber/ and restart wireplumber/pipewire.
systemctl --user restart pipewire{,-pulse} wireplumberLast edited by V1del (2023-12-07 10:36:31)
Offline
#9 2023-12-08 11:02:13
- turingmach
- Member
- Registered: 2023-11-12
- Posts: 6
Re: [SOLVED] Pipewire and wireplumber not working correctly
Wow that fixed it! I guess we can't look look at what was in the cache to see what the problem was but hopefully if someone else has this issue they find this post! Thanks for your help!
Offline
#10 2023-12-09 12:24:39
- Archttila
- Member
- From: Hungary
- Registered: 2021-11-16
- Posts: 26
Re: [SOLVED] Pipewire and wireplumber not working correctly
Fixed it my problem! 
Thanks!!
Passionate about minimalistic software, the Linux philosophy, and having fun. SFF and AV enthusiast, APU retro gamer.
Offline