You are not logged in.
- Topics: Active | Unanswered
#1 2024-01-03 16:17:09
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Displaylink: external displays keep crashing
Hello guys
I have two external LG displays connected via a HP USB-C hub. They turn on during boot, show up in system settings and display my wallpaper, Unfortunately however, as soon as I try to interact with them in any way (move the cursor over, move a folder over, start an application on one of the screens) they disconnect and reconnect, rendering them unusable.
I'm using the kernel 6.6.8-arch1-1, evdi 1.14.1-0 and Displaylink 5.8-1.
The output of
systemctl status displaylink.serviceis:
● displaylink.service - DisplayLink Manager Service
Loaded: loaded (/usr/lib/systemd/system/displaylink.service; enabled; preset: di>
Drop-In: /usr/lib/systemd/system/displaylink.service.d
└─displaylink-connect.conf
Active: active (running) since Wed 2024-01-03 17:07:30 CET; 10min ago
Process: 12146 ExecStartPre=/sbin/modprobe evdi (code=exited, status=0/SUCCESS)
Process: 12149 ExecStartPost=/bin/sleep 1 (code=exited, status=0/SUCCESS)
Process: 12166 ExecStartPost=/usr/bin/run_as_users_with_display systemctl --user >
Main PID: 12148 (DisplayLinkMana)
Tasks: 53 (limit: 19017)
Memory: 441.5M (peak: 442.4M)
CPU: 11.666s
CGroup: /system.slice/displaylink.service
└─12148 /usr/lib/displaylink/DisplayLinkManagerAny ideas as to what I could do to get them working?
Thanks! 
Last edited by calrissiano (2024-01-03 16:21:22)
Offline
#2 2024-01-04 08:53:42
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 14,893
Re: Displaylink: external displays keep crashing
calrissiano wrote:
I have two external LG displays connected via a HP USB-C hub.
DisplayLink requires very specfic hardware and the chance of an HP USB-C hub using it is very small.
What is the exact type of model of the hub ?
Also post xrandr -q output .
Welcome to archlinux forums
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#3 2024-01-04 09:12:01
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
So I got the displays to work using this guide for PopOS on Reddit. However, it only works with X11 and it does not store any settings for the next reboot, even though I save them.
Lone_Wolf wrote:
What is the exact type of model of the hub ?
Also post xrandr -q output .
It is a HP USB-C/A Universal Dock G2 that I'm also using on a MacBook Pro and a Windows PC from work. The output of
xrandr -qis
Screen 0: minimum 320 x 200, current 5520 x 1187, maximum 16384 x 16384
eDP-1 connected primary 1680x1050+3840+137 (normal left inverted right x axis y axis) 331mm x 207mm
2880x1800 60.00 +
2880x1620 59.96 59.97
2560x1600 59.99 59.97
2560x1440 59.99 59.99 59.96 59.95
2048x1536 60.00
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
2048x1152 59.99 59.98 59.90 59.91
1920x1200 60.00 59.88 59.95
1920x1080 60.01 60.00 59.97 59.96 59.93
1600x1200 60.00 60.00
1680x1050 60.00* 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.00 60.02
1440x900 60.00
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 60.00 59.99 59.97 59.81 59.91
1280x720 60.00 60.00 59.99 59.86 59.74
1024x768 60.00 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DVI-I-4-4 disconnected (normal left inverted right x axis y axis)
DVI-I-3-3 disconnected (normal left inverted right x axis y axis)
DVI-I-2-2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 600mm x 340mm
3840x2160 60.00 + 30.00
2560x1440 59.95
1920x1080 60.00* 59.94
1600x900 60.00
1280x1024 60.02
1280x800 59.81
1152x864 59.97
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
DVI-I-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 600mm x 340mm
3840x2160 60.00 + 30.00
2560x1440 59.95
1920x1080 60.00* 59.94
1600x900 60.00
1280x1024 60.02
1280x800 59.81
1152x864 59.97
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
2560x1440 (0x51) 241.500MHz +HSync -VSync
h: width 2560 start 2608 end 2640 total 2720 skew 0 clock 88.79KHz
v: height 1440 start 1443 end 1448 total 1481 clock 59.95Hz
1280x1024 (0x6d) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x800 (0x79) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1024x768 (0x82) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x92) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
640x480 (0xa0) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
3840x2160 (0xea) 533.250MHz +HSync -VSync
h: width 3840 start 3888 end 3920 total 4000 skew 0 clock 133.31KHz
v: height 2160 start 2214 end 2219 total 2222 clock 60.00Hz
3840x2160 (0xeb) 266.640MHz +HSync -VSync
h: width 3840 start 3848 end 3992 total 4000 skew 0 clock 66.66KHz
v: height 2160 start 2214 end 2219 total 2222 clock 30.00Hz
2560x1440 (0x51) 241.500MHz +HSync -VSync
h: width 2560 start 2608 end 2640 total 2720 skew 0 clock 88.79KHz
v: height 1440 start 1443 end 1448 total 1481 clock 59.95Hz
1920x1080 (0xec) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0xed) 148.352MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.43KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.94Hz
1600x900 (0xee) 108.000MHz +HSync +VSync
h: width 1600 start 1624 end 1704 total 1800 skew 0 clock 60.00KHz
v: height 900 start 901 end 904 total 1000 clock 60.00Hz
1280x1024 (0x6d) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x800 (0x79) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1280x720 (0xf0) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
1280x720 (0xf1) 74.176MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 44.96KHz
v: height 720 start 725 end 730 total 750 clock 59.94Hz
1024x768 (0x82) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x92) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
720x480 (0xf2) 27.027MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
720x480 (0xf3) 27.000MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
640x480 (0xf4) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0xa0) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94HzLone_Wolf wrote:
Welcome to archlinux forums
Thank you!
Offline
#4 2024-01-04 09:36:07
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
So I got the displays to work using this guide for PopOS on Reddit.
https://aur.archlinux.org/packages/evdi-git - though it seems 1.14.1-0 is the latest release you can get from the upstream webpage?
And what settings do you expect to be stored where and why?
Edit: you've seen https://wiki.archlinux.org/title/DisplayLink ?
Last edited by seth (2024-01-04 09:36:27)
Offline
#5 2024-01-04 09:53:53
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
https://aur.archlinux.org/packages/evdi-git - though it seems 1.14.1-0 is the latest release you can get from the upstream webpage?
And what settings do you expect to be stored where and why?Edit: you've seen https://wiki.archlinux.org/title/DisplayLink ?
Yes I have evdi 1.14.1-0 installed and displaylink 5.8-1, as per the DisplayLink page in the ArchWiki you quoted. I also tried the listed evdi-git and evdi-compat-git packages from AUR as well as displaylink-beta, but the only thing that got my external displays to show anything was the guide I mentioned.
I want to store basic stuff like the order of displays, individual resolutions and desktop backgrounds. All of this is reset to default when rebooting. It would also be great if I could try using the displays with Wayland.
Offline
#6 2024-01-04 10:02:56
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
https://wiki.archlinux.org/title/Multih … _xorg.conf and you've not illustrated what any wayland related issue would be?
Offline
#7 2024-01-04 22:26:24
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
https://wiki.archlinux.org/title/Multih … _xorg.conf and you've not illustrated what any wayland related issue would be?
Thanks, I've read that article as well. The issue is in order to save any sort of config, the monitors would need to stay on consistently first.
I did a clean install of Arch today to prevent any sort of interference installed only KDE Plasma. Then, I got Evdi and DisplayLink from the AUR per the Wiki. I did try the workaround from Reddit, but it no longer worked. I proceeded with getting Evdi-git which turns the screens on but they crash as soon as I interact with them, so I'm back at my initial post.
I currently have installed:
evdi-git 1.14.1.r5.g0313eca-1
displaylink 5.8-1
Kernel: 6.6.9-arch1-1
sudo systemctl status displaylink.service● displaylink.service - DisplayLink Manager Service
Loaded: loaded (/usr/lib/systemd/system/displaylink.service; enabled; preset: disabled)
Active: active (running) since Thu 2024-01-04 23:19:46 CET; 12min ago
Process: 5627 ExecStartPre=/sbin/modprobe evdi (code=exited, status=0/SUCCESS)
Main PID: 5628 (DisplayLinkMana)
Tasks: 53 (limit: 19044)
Memory: 133.9M (peak: 134.9M)
CPU: 3.467s
CGroup: /system.slice/displaylink.service
└─5628 /usr/lib/displaylink/DisplayLinkManager
Jan 04 23:19:41 archlinux systemd[1]: displaylink.service: Consumed 2.697s CPU time.
Jan 04 23:19:46 archlinux systemd[1]: displaylink.service: Scheduled restart job, restart counter is at 8.
Jan 04 23:19:46 archlinux systemd[1]: Starting DisplayLink Manager Service...
Jan 04 23:19:46 archlinux systemd[1]: Started DisplayLink Manager Service.xrandr -q
Screen 0: minimum 16 x 16, current 6719 x 1800, maximum 32767 x 32767
eDP-1 connected primary 2880x1800+3839+0 (normal left inverted right x axis y axis) 330mm x 210mm
2880x1800 59.97*+
2048x1536 59.95
1920x1440 59.97
1600x1200 59.87
1440x1080 59.99
1400x1050 59.98
1280x1024 59.89
1280x960 59.94
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
320x240 59.52
2560x1600 59.99
1920x1200 59.88
1680x1050 59.95
1440x900 59.89
1280x800 59.81
1152x720 59.97
960x600 59.63
928x580 59.88
800x500 59.50
768x480 59.90
720x480 59.71
640x400 59.95
320x200 58.96
2880x1620 59.96
2560x1440 59.96
2048x1152 59.90
1920x1080 59.96
1600x900 59.95
1368x768 59.88
1280x720 59.86
1024x576 59.90
864x486 59.92
720x400 59.55
640x350 59.77
DVI-I-2 connected 1920x1080+0+360 (normal left inverted right x axis y axis) 600mm x 340mm
1920x1080 59.96*+
1440x1080 59.99
1400x1050 59.98
1280x1024 59.89
1280x960 59.94
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
320x240 59.52
1680x1050 59.95
1440x900 59.89
1280x800 59.81
1152x720 59.97
960x600 59.63
928x580 59.88
800x500 59.50
768x480 59.90
720x480 59.71
640x400 59.95
320x200 58.96
1600x900 59.95
1368x768 59.88
1280x720 59.86
1024x576 59.90
864x486 59.92
720x400 59.55
640x350 59.77
DVI-I-1 connected 1920x1080+1919+360 (normal left inverted right x axis y axis) 600mm x 340mm
1920x1080 59.96*+
1440x1080 59.99
1400x1050 59.98
1280x1024 59.89
1280x960 59.94
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
320x240 59.52
1680x1050 59.95
1440x900 59.89
1280x800 59.81
1152x720 59.97
960x600 59.63
928x580 59.88
800x500 59.50
768x480 59.90
720x480 59.71
640x400 59.95
320x200 58.96
1600x900 59.95
1368x768 59.88
1280x720 59.86
1024x576 59.90
864x486 59.92
720x400 59.55
640x350 59.77 Last edited by calrissiano (2024-01-04 22:33:07)
Offline
#8 2024-01-04 22:30:02
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
There's nothing to "safe", you write into the xorg configlets how you want the outputs to be laid out.
but it no longer worked
It might never have but been a race condition/fluke?
but they crash as soon as I interact with them, so I'm back at my initial post.
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Please post your complete system journal for the boot:
sudo journalctl -b | curl -F 'file=@-' 0x0.stOffline
#9 2024-01-04 22:42:11
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
It might never have but been a race condition/fluke?
Sorry I don't understand what you mean by that.
seth wrote:
Please post your Xorg log,
[ 10.874] (--) Log file renamed from "/var/log/Xorg.pid-657.log" to "/var/log/Xorg.0.log"
[ 10.875]
X.Org X Server 1.21.1.10
X Protocol Version 11, Revision 0
[ 10.875] Current Operating System: Linux archlinux 6.6.9-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 02 Jan 2024 02:28:28 +0000 x86_64
[ 10.875] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=f1a0f850-8ff1-4ed1-a20b-520ab1265284 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
[ 10.875]
[ 10.875] Current version of pixman: 0.42.2
[ 10.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.875] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 4 23:03:09 2024
[ 10.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.876] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.876] (==) No Layout section. Using the first Screen section.
[ 10.876] (==) No screen section available. Using defaults.
[ 10.876] (**) |-->Screen "Default Screen Section" (0)
[ 10.876] (**) | |-->Monitor "<default monitor>"
[ 10.877] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.877] (==) Automatically adding devices
[ 10.877] (==) Automatically enabling devices
[ 10.877] (==) Automatically adding GPU devices
[ 10.877] (==) Automatically binding GPU devices
[ 10.877] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 10.877] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 10.877] Entry deleted from font path.
[ 10.877] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 10.877] Entry deleted from font path.
[ 10.877] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 10.877] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 10.877] Entry deleted from font path.
[ 10.877] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 10.877] Entry deleted from font path.
[ 10.877] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 10.877] Entry deleted from font path.
[ 10.877] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 10.877] Entry deleted from font path.
[ 10.877] (==) FontPath set to:
[ 10.877] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.877] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.877] (II) Module ABI versions:
[ 10.877] X.Org ANSI C Emulation: 0.4
[ 10.877] X.Org Video Driver: 25.2
[ 10.877] X.Org XInput driver : 24.4
[ 10.877] X.Org Server Extension : 10.0
[ 10.879] (++) using VT number 2
[ 10.879] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 10.886] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 10.886] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 10.907] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.907] (II) Platform probe for /sys/devices/platform/evdi.0/drm/card0
[ 10.907] (II) xfree86: Adding drm device (/dev/dri/card2)
[ 10.907] (II) Platform probe for /sys/devices/platform/evdi.1/drm/card2
[ 10.914] (--) PCI:*(1@0:0:0) 1002:67ef:106b:0160 rev 192, Mem @ 0xb0000000/268435456, 0xc0000000/2097152, 0x82600000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 10.914] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.914] (II) LoadModule: "glx"
[ 10.914] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.916] (II) Module glx: vendor="X.Org Foundation"
[ 10.916] compiled for 1.21.1.10, module version = 1.0.0
[ 10.916] ABI class: X.Org Server Extension, version 10.0
[ 10.916] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 10.916] loading driver: amdgpu
[ 10.916] (II) Applying OutputClass "DisplayLink" to /dev/dri/card0
[ 10.916] loading driver: modesetting
[ 10.916] (II) Applying OutputClass "DisplayLink" to /dev/dri/card2
[ 10.916] loading driver: modesetting
[ 10.916] (==) Matched amdgpu as autoconfigured driver 0
[ 10.916] (==) Matched ati as autoconfigured driver 1
[ 10.916] (==) Matched modesetting as autoconfigured driver 2
[ 10.916] (==) Matched fbdev as autoconfigured driver 3
[ 10.916] (==) Matched vesa as autoconfigured driver 4
[ 10.916] (==) Assigned the driver to the xf86ConfigLayout
[ 10.916] (II) LoadModule: "amdgpu"
[ 10.916] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 10.917] (II) Module amdgpu: vendor="X.Org Foundation"
[ 10.917] compiled for 1.21.1.7, module version = 23.0.0
[ 10.917] Module class: X.Org Video Driver
[ 10.917] ABI class: X.Org Video Driver, version 25.2
[ 10.917] (II) LoadModule: "ati"
[ 10.917] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 10.917] (II) Module ati: vendor="X.Org Foundation"
[ 10.917] compiled for 1.21.1.8, module version = 22.0.0
[ 10.917] Module class: X.Org Video Driver
[ 10.917] ABI class: X.Org Video Driver, version 25.2
[ 10.939] (II) LoadModule: "modesetting"
[ 10.940] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 10.940] (II) Module modesetting: vendor="X.Org Foundation"
[ 10.940] compiled for 1.21.1.10, module version = 1.21.1
[ 10.940] Module class: X.Org Video Driver
[ 10.940] ABI class: X.Org Video Driver, version 25.2
[ 10.940] (II) LoadModule: "fbdev"
[ 10.940] (WW) Warning, couldn't open module fbdev
[ 10.940] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 10.940] (II) LoadModule: "vesa"
[ 10.940] (WW) Warning, couldn't open module vesa
[ 10.940] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 10.940] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 10.940] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.985] (WW) Falling back to old probe method for modesetting
[ 10.986] (II) modeset(G0): using drv /dev/dri/card0
[ 10.986] (II) modeset(G1): using drv /dev/dri/card2
[ 10.986] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.986] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 10.986] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 10.986] (==) AMDGPU(0): Default visual is TrueColor
[ 10.986] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1
[ 10.986] (==) AMDGPU(0): RGB weight 888
[ 10.986] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 10.986] (--) AMDGPU(0): Chipset: "AMD Radeon RX Graphics" (ChipID = 0x67ef)
[ 10.986] (II) Loading sub module "fb"
[ 10.986] (II) LoadModule: "fb"
[ 10.986] (II) Module "fb" already built-in
[ 10.986] (II) Loading sub module "dri2"
[ 10.986] (II) LoadModule: "dri2"
[ 10.986] (II) Module "dri2" already built-in
[ 11.035] (II) Loading sub module "glamoregl"
[ 11.035] (II) LoadModule: "glamoregl"
[ 11.035] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 11.039] (II) Module glamoregl: vendor="X.Org Foundation"
[ 11.039] compiled for 1.21.1.10, module version = 1.0.1
[ 11.039] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.050] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX Graphics (radeonsi, polaris11, LLVM 16.0.6, DRM 3.54, 6.6.9-arch1-1)
[ 11.050] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 11.050] (==) AMDGPU(0): TearFree property default: auto
[ 11.050] (==) AMDGPU(0): VariableRefresh: disabled
[ 11.050] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 11.050] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 11.056] (II) AMDGPU(0): Output eDP has no monitor section
[ 11.056] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 11.056] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 11.057] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 11.057] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section
[ 11.062] (II) AMDGPU(0): EDID for output eDP
[ 11.062] (II) AMDGPU(0): Manufacturer: APP Model: a030 Serial#: 0
[ 11.062] (II) AMDGPU(0): Year: 2015 Week: 38
[ 11.062] (II) AMDGPU(0): EDID Version: 1.4
[ 11.062] (II) AMDGPU(0): Digital Display Input
[ 11.062] (II) AMDGPU(0): 10 bits per channel
[ 11.062] (II) AMDGPU(0): Digital interface is DisplayPort
[ 11.062] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 11.062] (II) AMDGPU(0): Gamma: 2.20
[ 11.062] (II) AMDGPU(0): No DPMS capabilities specified
[ 11.062] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 11.062] (II) AMDGPU(0): First detailed timing is preferred mode
[ 11.062] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 11.062] (II) AMDGPU(0): redX: 0.680 redY: 0.320 greenX: 0.265 greenY: 0.690
[ 11.062] (II) AMDGPU(0): blueX: 0.150 blueY: 0.050 whiteX: 0.310 whiteY: 0.329
[ 11.062] (II) AMDGPU(0): Manufacturer's mask: 0
[ 11.062] (II) AMDGPU(0): Supported detailed timing:
[ 11.062] (II) AMDGPU(0): clock: 328.9 MHz Image Size: 331 x 207 mm
[ 11.062] (II) AMDGPU(0): h_active: 2880 h_sync: 2888 h_sync_end 2920 h_blank_end 2960 h_border: 0
[ 11.062] (II) AMDGPU(0): v_active: 1800 v_sync: 1838 v_sync_end 1846 v_blanking: 1852 v_border: 0
[ 11.062] (II) AMDGPU(0): Monitor name: Color LCD
[ 11.062] (II) AMDGPU(0): EDID (in hex):
[ 11.062] (II) AMDGPU(0): 00ffffffffffff00061030a000000000
[ 11.062] (II) AMDGPU(0): 26190104b5211578020fb5ae5243b026
[ 11.062] (II) AMDGPU(0): 0c4f5400000001010101010101010101
[ 11.062] (II) AMDGPU(0): 0101010101017c804050b00834700820
[ 11.062] (II) AMDGPU(0): 68084bcf1000001a0000001000000000
[ 11.062] (II) AMDGPU(0): 00000000000000000000000000fc0043
[ 11.062] (II) AMDGPU(0): 6f6c6f72204c43440a20202000000010
[ 11.062] (II) AMDGPU(0): 0000000000000000000000000000009f
[ 11.063] (II) AMDGPU(0): Printing probed modes for output eDP
[ 11.063] (II) AMDGPU(0): Modeline "2880x1800"x60.0 328.92 2880 2888 2920 2960 1800 1838 1846 1852 +hsync -vsync (111.1 kHz eP)
[ 11.063] (II) AMDGPU(0): Modeline "1920x1200"x60.0 328.92 1920 2888 2920 2960 1200 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1920x1080"x60.0 328.92 1920 2888 2920 2960 1080 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1600x1200"x60.0 328.92 1600 2888 2920 2960 1200 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1680x1050"x60.0 328.92 1680 2888 2920 2960 1050 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1280x1024"x60.0 328.92 1280 2888 2920 2960 1024 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1440x900"x60.0 328.92 1440 2888 2920 2960 900 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1280x800"x60.0 328.92 1280 2888 2920 2960 800 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1280x720"x60.0 328.92 1280 2888 2920 2960 720 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "1024x768"x60.0 328.92 1024 2888 2920 2960 768 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "800x600"x60.0 328.92 800 2888 2920 2960 600 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): Modeline "640x480"x60.0 328.92 640 2888 2920 2960 480 1838 1846 1852 +hsync -vsync (111.1 kHz e)
[ 11.063] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 11.063] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 11.063] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 11.063] (II) AMDGPU(0): EDID for output DisplayPort-3
[ 11.063] (II) AMDGPU(0): Output eDP connected
[ 11.063] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 11.063] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 11.063] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 11.063] (II) AMDGPU(0): Output DisplayPort-3 disconnected
[ 11.063] (II) AMDGPU(0): Using exact sizes for initial modes
[ 11.063] (II) AMDGPU(0): Output eDP using initial mode 2880x1800 +0+0
[ 11.063] (II) AMDGPU(0): mem size init: gart size :1f01e7000 vram size: s:fdf09000 visible:101f4000
[ 11.063] (==) AMDGPU(0): DPI set to (96, 96)
[ 11.063] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.063] (II) Loading sub module "ramdac"
[ 11.063] (II) LoadModule: "ramdac"
[ 11.063] (II) Module "ramdac" already built-in
[ 11.063] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 11.063] (II) Applying OutputClass "DisplayLink" options to /dev/dri/card0
[ 11.063] (**) modeset(G0): Option "AccelMethod" "none"
[ 11.063] (==) modeset(G0): RGB weight 888
[ 11.063] (==) modeset(G0): Default visual is TrueColor
[ 11.063] (**) modeset(G0): glamor disabled
[ 11.063] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
[ 11.063] (II) modeset(G0): Output DVI-I-1-1 has no monitor section
[ 11.063] (II) modeset(G0): EDID for output DVI-I-1-1
[ 11.063] (II) modeset(G0): Manufacturer: GSM Model: 7707 Serial#: 564773
[ 11.063] (II) modeset(G0): Year: 2020 Week: 3
[ 11.063] (II) modeset(G0): EDID Version: 1.4
[ 11.063] (II) modeset(G0): Digital Display Input
[ 11.063] (II) modeset(G0): 10 bits per channel
[ 11.063] (II) modeset(G0): Digital interface is DisplayPort
[ 11.063] (II) modeset(G0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 11.063] (II) modeset(G0): Gamma: 2.20
[ 11.063] (II) modeset(G0): DPMS capabilities: StandBy
[ 11.063] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 11.063] (II) modeset(G0): Default color space is primary color space
[ 11.063] (II) modeset(G0): First detailed timing is preferred mode
[ 11.063] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 11.063] (II) modeset(G0): Display is continuous-frequency
[ 11.063] (II) modeset(G0): redX: 0.680 redY: 0.315 greenX: 0.280 greenY: 0.674
[ 11.063] (II) modeset(G0): blueX: 0.152 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
[ 11.063] (II) modeset(G0): Supported established timings:
[ 11.063] (II) modeset(G0): 640x480@60Hz
[ 11.063] (II) modeset(G0): 800x600@60Hz
[ 11.064] (II) modeset(G0): 1024x768@60Hz
[ 11.064] (II) modeset(G0): Manufacturer's mask: 0
[ 11.064] (II) modeset(G0): Supported standard timings:
[ 11.064] (II) modeset(G0): #0: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 11.064] (II) modeset(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 11.064] (II) modeset(G0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 11.064] (II) modeset(G0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 11.064] (II) modeset(G0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 11.064] (II) modeset(G0): #5: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 11.064] (II) modeset(G0): Supported detailed timing:
[ 11.064] (II) modeset(G0): clock: 533.2 MHz Image Size: 600 x 340 mm
[ 11.064] (II) modeset(G0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 11.064] (II) modeset(G0): v_active: 2160 v_sync: 2214 v_sync_end 2219 v_blanking: 2222 v_border: 0
[ 11.064] (II) modeset(G0): Supported detailed timing:
[ 11.064] (II) modeset(G0): clock: 266.6 MHz Image Size: 600 x 340 mm
[ 11.064] (II) modeset(G0): h_active: 3840 h_sync: 3848 h_sync_end 3992 h_blank_end 4000 h_border: 0
[ 11.064] (II) modeset(G0): v_active: 2160 v_sync: 2214 v_sync_end 2219 v_blanking: 2222 v_border: 0
[ 11.064] (II) modeset(G0): Ranges: V min: 48 V max: 61 Hz, H min: 135 H max: 135 kHz, PixClock max 565 MHz
[ 11.064] (II) modeset(G0): Monitor name: LG HDR 4K
[ 11.064] (II) modeset(G0): Supported detailed timing:
[ 11.064] (II) modeset(G0): clock: 148.5 MHz Image Size: 600 x 340 mm
[ 11.064] (II) modeset(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 11.064] (II) modeset(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 11.064] (II) modeset(G0): Supported detailed timing:
[ 11.064] (II) modeset(G0): clock: 241.5 MHz Image Size: 600 x 340 mm
[ 11.064] (II) modeset(G0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 11.064] (II) modeset(G0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 11.064] (II) modeset(G0): Number of EDID sections to follow: 1
[ 11.064] (II) modeset(G0): EDID (in hex):
[ 11.064] (II) modeset(G0): 00ffffffffffff001e6d0777259e0800
[ 11.064] (II) modeset(G0): 031e0104b53c22789f3e31ae5047ac27
[ 11.064] (II) modeset(G0): 0c50542108007140818081c0a9c0d1c0
[ 11.064] (II) modeset(G0): 8100010101014dd000a0f0703e803020
[ 11.064] (II) modeset(G0): 650c58542100001a286800a0f0703e80
[ 11.064] (II) modeset(G0): 0890650c58542100001a000000fd0030
[ 11.064] (II) modeset(G0): 3d878738010a202020202020000000fc
[ 11.064] (II) modeset(G0): 004c472048445220344b0a202020013d
[ 11.064] (II) modeset(G0): 02031971449004030123090707830100
[ 11.064] (II) modeset(G0): 00e305c000e3060501023a801871382d
[ 11.064] (II) modeset(G0): 40582c450058542100001e565e00a0a0
[ 11.064] (II) modeset(G0): a029503020350058542100001a000000
[ 11.064] (II) modeset(G0): 00000000000000000000000000000000
[ 11.064] (II) modeset(G0): 00000000000000000000000000000000
[ 11.064] (II) modeset(G0): 00000000000000000000000000000000
[ 11.064] (II) modeset(G0): 00000000000000000000000000000029
[ 11.064] (II) modeset(G0): Printing probed modes for output DVI-I-1-1
[ 11.064] (II) modeset(G0): Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2214 2219 2222 +hsync -vsync (133.3 kHz eP)
[ 11.064] (II) modeset(G0): Modeline "3840x2160"x30.0 266.64 3840 3848 3992 4000 2160 2214 2219 2222 +hsync -vsync (66.7 kHz e)
[ 11.064] (II) modeset(G0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1152x864"x60.0 81.77 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 11.064] (II) modeset(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.064] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.064] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.064] (II) modeset(G0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11.064] (II) modeset(G0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11.064] (II) modeset(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.064] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.064] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.064] (==) modeset(G0): DPI set to (96, 96)
[ 11.064] (II) Loading sub module "fb"
[ 11.064] (II) LoadModule: "fb"
[ 11.064] (II) Module "fb" already built-in
[ 11.064] (==) modeset(G1): Depth 24, (==) framebuffer bpp 32
[ 11.064] (II) Applying OutputClass "DisplayLink" options to /dev/dri/card2
[ 11.064] (**) modeset(G1): Option "AccelMethod" "none"
[ 11.064] (==) modeset(G1): RGB weight 888
[ 11.064] (==) modeset(G1): Default visual is TrueColor
[ 11.064] (**) modeset(G1): glamor disabled
[ 11.064] (II) modeset(G1): ShadowFB: preferred NO, enabled NO
[ 11.064] (II) modeset(G1): Output DVI-I-2-2 has no monitor section
[ 11.064] (II) modeset(G1): EDID for output DVI-I-2-2
[ 11.064] (==) modeset(G1): Using gamma correction (1.0, 1.0, 1.0)
[ 11.064] (==) modeset(G1): DPI set to (96, 96)
[ 11.064] (II) Loading sub module "fb"
[ 11.064] (II) LoadModule: "fb"
[ 11.064] (II) Module "fb" already built-in
[ 11.064] (II) AMDGPU(0): [DRI2] Setup complete
[ 11.064] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 11.064] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 11.064] (II) AMDGPU(0): Front buffer pitch: 11776 bytes
[ 11.064] (II) AMDGPU(0): SYNC extension fences enabled
[ 11.064] (II) AMDGPU(0): Present extension enabled
[ 11.064] (==) AMDGPU(0): DRI3 enabled
[ 11.064] (==) AMDGPU(0): Backing store enabled
[ 11.064] (II) AMDGPU(0): Direct rendering enabled
[ 11.073] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 11.073] (II) AMDGPU(0): Acceleration enabled
[ 11.073] (==) AMDGPU(0): DPMS enabled
[ 11.073] (==) AMDGPU(0): Silken mouse enabled
[ 11.073] (II) AMDGPU(0): Set up textured video (glamor)
[ 11.090] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[ 11.090] (==) modeset(G0): Backing store enabled
[ 11.090] (==) modeset(G0): Silken mouse enabled
[ 11.090] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 11.090] (==) modeset(G0): DPMS enabled
[ 11.090] (==) modeset(G1): Backing store enabled
[ 11.090] (==) modeset(G1): Silken mouse enabled
[ 11.090] (II) modeset(G1): Initializing kms color map for depth 24, 8 bpc.
[ 11.090] (==) modeset(G1): DPMS enabled
[ 11.090] (II) Initializing extension Generic Event Extension
[ 11.090] (II) Initializing extension SHAPE
[ 11.090] (II) Initializing extension MIT-SHM
[ 11.090] (II) Initializing extension XInputExtension
[ 11.090] (II) Initializing extension XTEST
[ 11.090] (II) Initializing extension BIG-REQUESTS
[ 11.091] (II) Initializing extension SYNC
[ 11.091] (II) Initializing extension XKEYBOARD
[ 11.091] (II) Initializing extension XC-MISC
[ 11.091] (II) Initializing extension SECURITY
[ 11.091] (II) Initializing extension XFIXES
[ 11.091] (II) Initializing extension RENDER
[ 11.091] (II) Initializing extension RANDR
[ 11.091] (II) Initializing extension COMPOSITE
[ 11.091] (II) Initializing extension DAMAGE
[ 11.091] (II) Initializing extension MIT-SCREEN-SAVER
[ 11.092] (II) Initializing extension DOUBLE-BUFFER
[ 11.092] (II) Initializing extension RECORD
[ 11.092] (II) Initializing extension DPMS
[ 11.092] (II) Initializing extension Present
[ 11.092] (II) Initializing extension DRI3
[ 11.092] (II) Initializing extension X-Resource
[ 11.092] (II) Initializing extension XVideo
[ 11.092] (II) Initializing extension XVideo-MotionCompensation
[ 11.092] (II) Initializing extension GLX
[ 11.098] (II) AIGLX: Loaded and initialized radeonsi
[ 11.098] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.098] (II) Initializing extension XFree86-VidModeExtension
[ 11.098] (II) Initializing extension XFree86-DGA
[ 11.098] (II) Initializing extension XFree86-DRI
[ 11.098] (II) Initializing extension DRI2
[ 11.099] (II) modeset(G0): Damage tracking initialized
[ 11.100] (II) modeset(G1): Damage tracking initialized
[ 11.100] (II) AMDGPU(0): Setting screen physical size to 762 x 476
[ 11.179] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 11.179] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11.179] (**) Power Button: Applying InputClass "system-keyboard"
[ 11.179] (II) LoadModule: "libinput"
[ 11.179] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11.181] (II) Module libinput: vendor="X.Org Foundation"
[ 11.181] compiled for 1.21.1.8, module version = 1.4.0
[ 11.181] Module class: X.Org XInput Driver
[ 11.181] ABI class: X.Org XInput driver, version 24.4
[ 11.181] (II) Using input driver 'libinput' for 'Power Button'
[ 11.181] (**) Power Button: always reports core events
[ 11.181] (**) Option "Device" "/dev/input/event3"
[ 11.183] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 11.183] (II) event3 - Power Button: device is a keyboard
[ 11.183] (II) event3 - Power Button: device removed
[ 11.221] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 11.221] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.221] (**) Option "xkb_model" "pc105+inet"
[ 11.221] (**) Option "xkb_layout" "us"
[ 11.221] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.275] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 11.275] (II) event3 - Power Button: device is a keyboard
[ 11.276] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 11.276] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 11.276] (**) Video Bus: Applying InputClass "system-keyboard"
[ 11.276] (II) Using input driver 'libinput' for 'Video Bus'
[ 11.276] (**) Video Bus: always reports core events
[ 11.276] (**) Option "Device" "/dev/input/event5"
[ 11.278] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 11.278] (II) event5 - Video Bus: device is a keyboard
[ 11.278] (II) event5 - Video Bus: device removed
[ 11.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[ 11.323] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11.323] (**) Option "xkb_model" "pc105+inet"
[ 11.323] (**) Option "xkb_layout" "us"
[ 11.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.326] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 11.327] (II) event5 - Video Bus: device is a keyboard
[ 11.328] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.328] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11.328] (**) Power Button: Applying InputClass "system-keyboard"
[ 11.328] (II) Using input driver 'libinput' for 'Power Button'
[ 11.329] (**) Power Button: always reports core events
[ 11.329] (**) Option "Device" "/dev/input/event1"
[ 11.332] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 11.332] (II) event1 - Power Button: device is a keyboard
[ 11.332] (II) event1 - Power Button: device removed
[ 11.350] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 11.350] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 11.350] (**) Option "xkb_model" "pc105+inet"
[ 11.350] (**) Option "xkb_layout" "us"
[ 11.350] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.354] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 11.354] (II) event1 - Power Button: device is a keyboard
[ 11.356] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 11.356] (II) No input driver specified, ignoring this device.
[ 11.356] (II) This device may have been added with another device file.
[ 11.358] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 11.358] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 11.358] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 11.358] (II) Using input driver 'libinput' for 'Sleep Button'
[ 11.358] (**) Sleep Button: always reports core events
[ 11.358] (**) Option "Device" "/dev/input/event2"
[ 11.361] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 11.362] (II) event2 - Sleep Button: device is a keyboard
[ 11.362] (II) event2 - Sleep Button: device removed
[ 11.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 11.396] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 11.397] (**) Option "xkb_model" "pc105+inet"
[ 11.397] (**) Option "xkb_layout" "us"
[ 11.397] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.401] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 11.401] (II) event2 - Sleep Button: device is a keyboard
[ 11.405] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12)
[ 11.405] (II) No input driver specified, ignoring this device.
[ 11.405] (II) This device may have been added with another device file.
[ 11.406] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event13)
[ 11.406] (II) No input driver specified, ignoring this device.
[ 11.406] (II) This device may have been added with another device file.
[ 11.408] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[ 11.408] (II) No input driver specified, ignoring this device.
[ 11.408] (II) This device may have been added with another device file.
[ 11.410] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[ 11.410] (II) No input driver specified, ignoring this device.
[ 11.410] (II) This device may have been added with another device file.
[ 11.411] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10)
[ 11.411] (II) No input driver specified, ignoring this device.
[ 11.411] (II) This device may have been added with another device file.
[ 11.413] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event11)
[ 11.413] (II) No input driver specified, ignoring this device.
[ 11.413] (II) This device may have been added with another device file.
[ 11.417] (II) config/udev: Adding input device Jabra SPEAK 510 USB (/dev/input/event15)
[ 11.417] (**) Jabra SPEAK 510 USB: Applying InputClass "libinput keyboard catchall"
[ 11.417] (**) Jabra SPEAK 510 USB: Applying InputClass "system-keyboard"
[ 11.417] (II) Using input driver 'libinput' for 'Jabra SPEAK 510 USB'
[ 11.417] (**) Jabra SPEAK 510 USB: always reports core events
[ 11.417] (**) Option "Device" "/dev/input/event15"
[ 11.424] (II) event15 - Jabra SPEAK 510 USB: is tagged by udev as: Keyboard
[ 11.424] (II) event15 - Jabra SPEAK 510 USB: device is a keyboard
[ 11.424] (II) event15 - Jabra SPEAK 510 USB: device removed
[ 11.486] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3.3/1-5.3.3:1.3/0003:0B0E:0422.0002/input/input16/event15"
[ 11.486] (II) XINPUT: Adding extended input device "Jabra SPEAK 510 USB" (type: KEYBOARD, id 10)
[ 11.486] (**) Option "xkb_model" "pc105+inet"
[ 11.486] (**) Option "xkb_layout" "us"
[ 11.487] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.493] (II) event15 - Jabra SPEAK 510 USB: is tagged by udev as: Keyboard
[ 11.494] (II) event15 - Jabra SPEAK 510 USB: device is a keyboard
[ 11.498] (II) config/udev: Adding input device HP HP USB-C/A Universal Dock G2 System Control (/dev/input/event14)
[ 11.498] (**) HP HP USB-C/A Universal Dock G2 System Control: Applying InputClass "libinput keyboard catchall"
[ 11.498] (**) HP HP USB-C/A Universal Dock G2 System Control: Applying InputClass "system-keyboard"
[ 11.498] (II) Using input driver 'libinput' for 'HP HP USB-C/A Universal Dock G2 System Control'
[ 11.498] (**) HP HP USB-C/A Universal Dock G2 System Control: always reports core events
[ 11.498] (**) Option "Device" "/dev/input/event14"
[ 11.504] (II) event14 - HP HP USB-C/A Universal Dock G2 System Control: is tagged by udev as: Keyboard
[ 11.504] (II) event14 - HP HP USB-C/A Universal Dock G2 System Control: device is a keyboard
[ 11.505] (II) event14 - HP HP USB-C/A Universal Dock G2 System Control: device removed
[ 11.527] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.5/1-5.5:1.2/0003:03F0:0A6B.0001/input/input15/event14"
[ 11.527] (II) XINPUT: Adding extended input device "HP HP USB-C/A Universal Dock G2 System Control" (type: KEYBOARD, id 11)
[ 11.527] (**) Option "xkb_model" "pc105+inet"
[ 11.527] (**) Option "xkb_layout" "us"
[ 11.527] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.533] (II) event14 - HP HP USB-C/A Universal Dock G2 System Control: is tagged by udev as: Keyboard
[ 11.533] (II) event14 - HP HP USB-C/A Universal Dock G2 System Control: device is a keyboard
[ 11.537] (II) config/udev: Adding input device Apple SPI Keyboard (/dev/input/event6)
[ 11.537] (**) Apple SPI Keyboard: Applying InputClass "libinput keyboard catchall"
[ 11.537] (**) Apple SPI Keyboard: Applying InputClass "system-keyboard"
[ 11.537] (II) Using input driver 'libinput' for 'Apple SPI Keyboard'
[ 11.537] (**) Apple SPI Keyboard: always reports core events
[ 11.537] (**) Option "Device" "/dev/input/event6"
[ 11.541] (II) event6 - Apple SPI Keyboard: is tagged by udev as: Keyboard
[ 11.541] (II) event6 - Apple SPI Keyboard: device is a keyboard
[ 11.542] (II) event6 - Apple SPI Keyboard: device removed
[ 11.580] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.5/spi_master/spi2/spi-APP000D:00/input/input12/event6"
[ 11.580] (II) XINPUT: Adding extended input device "Apple SPI Keyboard" (type: KEYBOARD, id 12)
[ 11.580] (**) Option "xkb_model" "pc105+inet"
[ 11.580] (**) Option "xkb_layout" "us"
[ 11.580] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.585] (II) event6 - Apple SPI Keyboard: is tagged by udev as: Keyboard
[ 11.585] (II) event6 - Apple SPI Keyboard: device is a keyboard
[ 11.589] (II) config/udev: Adding input device Apple SPI Touchpad (/dev/input/event7)
[ 11.589] (**) Apple SPI Touchpad: Applying InputClass "libinput touchpad catchall"
[ 11.589] (II) Using input driver 'libinput' for 'Apple SPI Touchpad'
[ 11.589] (**) Apple SPI Touchpad: always reports core events
[ 11.589] (**) Option "Device" "/dev/input/event7"
[ 11.593] (II) event7 - Apple SPI Touchpad: is tagged by udev as: Touchpad
[ 11.598] (II) event7 - Apple SPI Touchpad: device is a touchpad
[ 11.598] (II) event7 - Apple SPI Touchpad: device removed
[ 11.640] (II) libinput: Apple SPI Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.640] (II) libinput: Apple SPI Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.640] (II) libinput: Apple SPI Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.5/spi_master/spi2/spi-APP000D:00/input/input13/event7"
[ 11.641] (II) XINPUT: Adding extended input device "Apple SPI Touchpad" (type: TOUCHPAD, id 13)
[ 11.645] (**) Option "AccelerationScheme" "none"
[ 11.645] (**) Apple SPI Touchpad: (accel) selected scheme none/0
[ 11.645] (**) Apple SPI Touchpad: (accel) acceleration factor: 2.000
[ 11.645] (**) Apple SPI Touchpad: (accel) acceleration threshold: 4
[ 11.649] (II) event7 - Apple SPI Touchpad: is tagged by udev as: Touchpad
[ 11.654] (II) event7 - Apple SPI Touchpad: device is a touchpad
[ 11.657] (II) config/udev: Adding input device Apple SPI Touchpad (/dev/input/mouse0)
[ 11.657] (II) No input driver specified, ignoring this device.
[ 11.657] (II) This device may have been added with another device file.
[ 11.660] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 11.660] (II) No input driver specified, ignoring this device.
[ 11.660] (II) This device may have been added with another device file.
[ 11.694] (II) AMDGPU(0): EDID vendor "APP", prod id 41008
[ 11.694] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11.694] (II) AMDGPU(0): Modeline "2880x1800"x0.0 328.92 2880 2888 2920 2960 1800 1838 1846 1852 +hsync -vsync (111.1 kHz eP)
[ 18.205] (II) config/udev: Adding input device Logitech Wireless Mouse MX Master 3 (/dev/input/mouse1)
[ 18.205] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "system-keyboard"
[ 18.205] (II) No input driver specified, ignoring this device.
[ 18.205] (II) This device may have been added with another device file.
[ 18.269] (II) config/udev: Adding input device Logitech Wireless Mouse MX Master 3 (/dev/input/event16)
[ 18.269] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput pointer catchall"
[ 18.269] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput keyboard catchall"
[ 18.269] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "system-keyboard"
[ 18.269] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse MX Master 3'
[ 18.269] (**) Logitech Wireless Mouse MX Master 3: always reports core events
[ 18.269] (**) Option "Device" "/dev/input/event16"
[ 18.272] (II) event16 - Logitech Wireless Mouse MX Master 3: is tagged by udev as: Keyboard Mouse
[ 18.273] (II) event16 - Logitech Wireless Mouse MX Master 3: device is a pointer
[ 18.273] (II) event16 - Logitech Wireless Mouse MX Master 3: device is a keyboard
[ 18.274] (II) event16 - Logitech Wireless Mouse MX Master 3: device removed
[ 18.300] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 18.300] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 18.300] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 18.300] (II) libinput: Logitech Wireless Mouse MX Master 3: needs a virtual subdevice
[ 18.300] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B023.0003/input/input20/event16"
[ 18.300] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse MX Master 3" (type: MOUSE, id 14)
[ 18.300] (**) Option "AccelerationScheme" "none"
[ 18.300] (**) Logitech Wireless Mouse MX Master 3: (accel) selected scheme none/0
[ 18.301] (**) Logitech Wireless Mouse MX Master 3: (accel) acceleration factor: 2.000
[ 18.301] (**) Logitech Wireless Mouse MX Master 3: (accel) acceleration threshold: 4
[ 18.304] (II) event16 - Logitech Wireless Mouse MX Master 3: is tagged by udev as: Keyboard Mouse
[ 18.304] (II) event16 - Logitech Wireless Mouse MX Master 3: device is a pointer
[ 18.304] (II) event16 - Logitech Wireless Mouse MX Master 3: device is a keyboard
[ 18.305] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput pointer catchall"
[ 18.305] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput keyboard catchall"
[ 18.305] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "system-keyboard"
[ 18.305] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse MX Master 3'
[ 18.305] (**) Logitech Wireless Mouse MX Master 3: always reports core events
[ 18.305] (**) Option "Device" "/dev/input/event16"
[ 18.305] (II) libinput: Logitech Wireless Mouse MX Master 3: is a virtual subdevice
[ 18.306] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 18.306] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 18.306] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 18.306] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B023.0003/input/input20/event16"
[ 18.306] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse MX Master 3" (type: KEYBOARD, id 15)
[ 18.306] (**) Option "xkb_model" "pc105+inet"
[ 18.306] (**) Option "xkb_layout" "us"
[ 18.306] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 30.452] (II) config/udev: Adding input device Keychron K8 Pro Mouse (/dev/input/mouse2)
[ 30.452] (II) No input driver specified, ignoring this device.
[ 30.452] (II) This device may have been added with another device file.
[ 30.519] (II) config/udev: Adding input device Keychron K8 Pro Mouse (/dev/input/event18)
[ 30.519] (**) Keychron K8 Pro Mouse: Applying InputClass "libinput pointer catchall"
[ 30.519] (II) Using input driver 'libinput' for 'Keychron K8 Pro Mouse'
[ 30.519] (**) Keychron K8 Pro Mouse: always reports core events
[ 30.519] (**) Option "Device" "/dev/input/event18"
[ 30.525] (II) event18 - Keychron K8 Pro Mouse: is tagged by udev as: Mouse
[ 30.526] (II) event18 - Keychron K8 Pro Mouse: device is a pointer
[ 30.526] (II) event18 - Keychron K8 Pro Mouse: device removed
[ 30.593] (II) libinput: Keychron K8 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 30.593] (II) libinput: Keychron K8 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 30.593] (II) libinput: Keychron K8 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 30.593] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/dw-apb-uart.2/serial1/serial1-0/bluetooth/hci0/hci0:11/0005:3434:0280.0004/input/input22/event18"
[ 30.593] (II) XINPUT: Adding extended input device "Keychron K8 Pro Mouse" (type: MOUSE, id 16)
[ 30.594] (**) Option "AccelerationScheme" "none"
[ 30.594] (**) Keychron K8 Pro Mouse: (accel) selected scheme none/0
[ 30.594] (**) Keychron K8 Pro Mouse: (accel) acceleration factor: 2.000
[ 30.594] (**) Keychron K8 Pro Mouse: (accel) acceleration threshold: 4
[ 30.600] (II) event18 - Keychron K8 Pro Mouse: is tagged by udev as: Mouse
[ 30.600] (II) event18 - Keychron K8 Pro Mouse: device is a pointer
[ 30.604] (II) config/udev: Adding input device Keychron K8 Pro Keyboard (/dev/input/event17)
[ 30.604] (**) Keychron K8 Pro Keyboard: Applying InputClass "libinput keyboard catchall"
[ 30.604] (**) Keychron K8 Pro Keyboard: Applying InputClass "system-keyboard"
[ 30.604] (II) Using input driver 'libinput' for 'Keychron K8 Pro Keyboard'
[ 30.604] (**) Keychron K8 Pro Keyboard: always reports core events
[ 30.604] (**) Option "Device" "/dev/input/event17"
[ 30.610] (II) event17 - Keychron K8 Pro Keyboard: is tagged by udev as: Keyboard
[ 30.611] (II) event17 - Keychron K8 Pro Keyboard: device is a keyboard
[ 30.612] (II) event17 - Keychron K8 Pro Keyboard: device removed
[ 30.640] (II) libinput: Keychron K8 Pro Keyboard: needs a virtual subdevice
[ 30.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/dw-apb-uart.2/serial1/serial1-0/bluetooth/hci0/hci0:11/0005:3434:0280.0004/input/input21/event17"
[ 30.640] (II) XINPUT: Adding extended input device "Keychron K8 Pro Keyboard" (type: MOUSE, id 17)
[ 30.640] (**) Option "AccelerationScheme" "none"
[ 30.640] (**) Keychron K8 Pro Keyboard: (accel) selected scheme none/0
[ 30.640] (**) Keychron K8 Pro Keyboard: (accel) acceleration factor: 2.000
[ 30.640] (**) Keychron K8 Pro Keyboard: (accel) acceleration threshold: 4
[ 30.646] (II) event17 - Keychron K8 Pro Keyboard: is tagged by udev as: Keyboard
[ 30.647] (II) event17 - Keychron K8 Pro Keyboard: device is a keyboard
[ 30.648] (**) Keychron K8 Pro Keyboard: Applying InputClass "libinput keyboard catchall"
[ 30.648] (**) Keychron K8 Pro Keyboard: Applying InputClass "system-keyboard"
[ 30.648] (II) Using input driver 'libinput' for 'Keychron K8 Pro Keyboard'
[ 30.648] (**) Keychron K8 Pro Keyboard: always reports core events
[ 30.648] (**) Option "Device" "/dev/input/event17"
[ 30.648] (II) libinput: Keychron K8 Pro Keyboard: is a virtual subdevice
[ 30.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/dw-apb-uart.2/serial1/serial1-0/bluetooth/hci0/hci0:11/0005:3434:0280.0004/input/input21/event17"
[ 30.648] (II) XINPUT: Adding extended input device "Keychron K8 Pro Keyboard" (type: KEYBOARD, id 18)
[ 30.648] (**) Option "xkb_model" "pc105+inet"
[ 30.648] (**) Option "xkb_layout" "us"
[ 30.648] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 51.687] (II) event3 - Power Button: device removed
[ 51.713] (II) event5 - Video Bus: device removed
[ 51.773] (II) event1 - Power Button: device removed
[ 51.793] (II) event2 - Sleep Button: device removed
[ 51.826] (II) event15 - Jabra SPEAK 510 USB: device removed
[ 51.870] (II) event14 - HP HP USB-C/A Universal Dock G2 System Control: device removed
[ 51.886] (II) event6 - Apple SPI Keyboard: device removed
[ 51.930] (II) event7 - Apple SPI Touchpad: device removed
[ 51.963] (II) event16 - Logitech Wireless Mouse MX Master 3: device removed
[ 51.980] (II) event18 - Keychron K8 Pro Mouse: device removed
[ 52.016] (II) event17 - Keychron K8 Pro Keyboard: device removed
[ 52.033] (II) AIGLX: Suspending AIGLX clients for VT switchseth wrote:
Please post your complete system journal for the boot
http://0x0.st/H6tH.txtLast edited by calrissiano (2024-01-04 22:44:58)
Offline
#10 2024-01-04 22:44:50
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
Sorry I don't understand what you mean by that.
If the result of an experiment isn't reproducible, the successful experiment didn't prove anything.
Aparently it does not allow uploads via my DNS provider, I'll find a way around.
sudo journalctl -b | curl -F 'f:1=<-' ix.ioOffline
#11 2024-01-04 22:47:53
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
ix.io is taking a break
but it worked via a different AP, I uploaded it at http://0x0.st/H6tH.txt
Offline
#12 2024-01-05 08:20:54
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
Jan 04 23:03:08 archlinux systemd-coredump[629]: Process 554 (Xorg) of user 0 dumped core.
Stack trace of thread 554:
#0 0x00007f9747bdd83c n/a (libc.so.6 + 0x8e83c)
#1 0x00007f9747b8d668 raise (libc.so.6 + 0x3e668)
#2 0x00007f9747b754b8 abort (libc.so.6 + 0x264b8)
#3 0x0000564f0d9f8a00 OsAbort (Xorg + 0x159a00)
#4 0x0000564f0d9f8d3b FatalError (Xorg + 0x159d3b)
#5 0x0000564f0d9f0cb6 n/a (Xorg + 0x151cb6)
#6 0x00007f9747b8d710 n/a (libc.so.6 + 0x3e710)Jan 04 23:03:52 archlinux systemd-coredump[852]: Process 551 (DisplayLinkMana) of user 0 dumped core.
Stack trace of thread 669:
#0 0x00007f5efaf51487 n/a (libc.so.6 + 0x158487)
#1 0x00007f5ef85ad3f5 evdi_handle_events (libevdi.so + 0x43f5)
#2 0x000056378cc5fbee n/a (DisplayLinkManager + 0x244bee)
#3 0x000056378cb3cfc4 n/a (DisplayLinkManager + 0x121fc4)
#4 0x000056378cbbac60 n/a (DisplayLinkManager + 0x19fc60)
#5 0x00007f5efae859eb n/a (libc.so.6 + 0x8c9eb)
#6 0x00007f5efaf097cc n/a (libc.so.6 + 0x1107cc)Do you have more luck w/ the LTS kernel?
Does displaylink ship a ddx driver (though the PKGBUILD seems to disable that?)
pacman -Ql displaylink evdiOffline
#13 2024-01-05 11:04:24
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
Do you have more luck w/ the LTS kernel?
I changed to the 6.1.70-1-lts kernel and now the displays do not turn on anymore and aren't listed on xrander either.
seth wrote:
Does displaylink ship a ddx driver (though the PKGBUILD seems to disable that?)
pacman -Ql displaylink evdi
displaylink /opt/
displaylink /opt/displaylink/
displaylink /opt/displaylink/udev.sh
displaylink /usr/
displaylink /usr/lib/
displaylink /usr/lib/displaylink/
displaylink /usr/lib/displaylink/DisplayLinkManager
displaylink /usr/lib/displaylink/ella-dock-release.spkg
displaylink /usr/lib/displaylink/firefly-monitor-release.spkg
displaylink /usr/lib/displaylink/navarro-dock-release.spkg
displaylink /usr/lib/displaylink/ridge-dock-release.spkg
displaylink /usr/lib/systemd/
displaylink /usr/lib/systemd/system-sleep/
displaylink /usr/lib/systemd/system-sleep/displaylink.sh
displaylink /usr/lib/systemd/system/
displaylink /usr/lib/systemd/system/displaylink.service
displaylink /usr/lib/udev/
displaylink /usr/lib/udev/rules.d/
displaylink /usr/lib/udev/rules.d/99-displaylink.rules
displaylink /usr/share/
displaylink /usr/share/licenses/
displaylink /usr/share/licenses/displaylink/
displaylink /usr/share/licenses/displaylink/DISPLAYLINK-EULA
displaylink /usr/share/licenses/displaylink/LICENSE
displaylink /var/
displaylink /var/log/
displaylink /var/log/displaylink/
evdi-git /usr/
evdi-git /usr/lib/
evdi-git /usr/lib/libevdi.so
evdi-git /usr/lib/libevdi.so.1
evdi-git /usr/lib/libevdi.so.1.14.1
evdi-git /usr/src/
evdi-git /usr/src/evdi-1.14.1/
evdi-git /usr/src/evdi-1.14.1/Kconfig
evdi-git /usr/src/evdi-1.14.1/LICENSE
evdi-git /usr/src/evdi-1.14.1/Makefile
evdi-git /usr/src/evdi-1.14.1/dkms.conf
evdi-git /usr/src/evdi-1.14.1/evdi_connector.c
evdi-git /usr/src/evdi-1.14.1/evdi_cursor.c
evdi-git /usr/src/evdi-1.14.1/evdi_cursor.h
evdi-git /usr/src/evdi-1.14.1/evdi_debug.c
evdi-git /usr/src/evdi-1.14.1/evdi_debug.h
evdi-git /usr/src/evdi-1.14.1/evdi_drm.h
evdi-git /usr/src/evdi-1.14.1/evdi_drm_drv.c
evdi-git /usr/src/evdi-1.14.1/evdi_drm_drv.h
evdi-git /usr/src/evdi-1.14.1/evdi_encoder.c
evdi-git /usr/src/evdi-1.14.1/evdi_fb.c
evdi-git /usr/src/evdi-1.14.1/evdi_gem.c
evdi-git /usr/src/evdi-1.14.1/evdi_i2c.c
evdi-git /usr/src/evdi-1.14.1/evdi_i2c.h
evdi-git /usr/src/evdi-1.14.1/evdi_ioc32.c
evdi-git /usr/src/evdi-1.14.1/evdi_modeset.c
evdi-git /usr/src/evdi-1.14.1/evdi_painter.c
evdi-git /usr/src/evdi-1.14.1/evdi_params.c
evdi-git /usr/src/evdi-1.14.1/evdi_params.h
evdi-git /usr/src/evdi-1.14.1/evdi_platform_dev.c
evdi-git /usr/src/evdi-1.14.1/evdi_platform_dev.h
evdi-git /usr/src/evdi-1.14.1/evdi_platform_drv.c
evdi-git /usr/src/evdi-1.14.1/evdi_platform_drv.h
evdi-git /usr/src/evdi-1.14.1/evdi_sysfs.c
evdi-git /usr/src/evdi-1.14.1/evdi_sysfs.hAnything else I might try? I really appreciate the help btw!
OK so apparently the Evdi module is missing now that I swapped kernels.
Jan 05 12:00:19 archlinux modprobe[2623]: modprobe: FATAL: Module evdi not found in directory /lib/modules/6.1.70-1-ltsI'm currently reading up online to figure out how to rebuilt it.
sudo systemctl start displaylink.servicefails because of this.
So I found this thread and installed evdi-compat-git as a result, but that also didn't solve it so I went back to evdi-git. Sill trying to restart displaylink at this point.
After reading this unrelated topic (but also regarding a module that wasn't found after a kernel update) I tried restarting again (did that before as well) but it still says module not found.
I also reinstalled both evdi-git and displaylink in the hopes it may rebuild the module, but no luck.
Last edited by calrissiano (2024-01-05 12:08:04)
Offline
#14 2024-01-05 13:27:30
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
OK so apparently the Evdi module is missing now that I swapped kernels.
You forgot to install linux-lts-headers and/or build the dkms module or the build failed.
seth wrote:
Does displaylink ship a ddx driver
"no"
Offline
#15 2024-01-05 13:38:16
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
You forgot to install linux-lts-headers and/or build the dkms module or the build failed.
Thanks! I did
yay -S linux-lts-headersand immediately the screens turned back on. However, they will disconnect/restart if interacted with. Should I try building the dkms module next?
seth wrote:
"no"
Sorry I'm super new, so I can't read/interpret this very well so I thought it was better to share the output. Thanks for the patience!
Offline
#16 2024-01-05 13:43:42
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
dkms status will tell whether you already built the relevant module (but I suspect that "screens turned back on" means "yes")
Does the LTS behavior cover X11, wayland or both?
so I thought it was better to share the output
No, that's fine - I was answering my own question, the package doesn't ship a DDX driver.
Offline
#17 2024-01-05 13:49:36
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
dkms statuswill tell whether you already built the relevant module (but I suspect that "screens turned back on" means "yes")
dkms statusevdi/1.14.1, 6.1.70-1-lts, x86_64: installed
evdi/1.14.1, 6.6.9-arch1-1, x86_64: installedseth wrote:
Does the LTS behavior cover X11, wayland or both?
When I did the clean install yesterday I only installed KDE with X11 and I'd be totally happy if only that would work!
Offline
#18 2024-01-05 14:59:04
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
they will disconnect/restart if interacted with
Is this different from the behavior w/ the main kernel or do you get the same Xorg segfaults?
You could try to build https://aur.archlinux.org/packages/displaylink w/ an adjusted PKGBUILD that doesn't have "--nox11" but I suspect the DDX driver will then crash in libevdi 
Offline
#19 2024-01-05 15:23:29
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
they will disconnect/restart if interacted with
Is this different from the behavior w/ the main kernel or do you get the same Xorg segfaults?
You could try to build https://aur.archlinux.org/packages/displaylink w/ an adjusted PKGBUILD that doesn't have "--nox11" but I suspect the DDX driver will then crash in libevdi
Same behavior as before. Building a package sounds advanced but I will try. I also tried the Reddit workaround again and while I could do everything it doesn't work anymore but gives me the same behavior.
Offline
#20 2024-01-05 15:34:28
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
You're building that package anyway (I hope yay allows you to inspect and edit the PKGBUILD)
Offline
#21 2024-01-05 16:43:23
- calrissiano
- Member
- Registered: 2024-01-03
- Posts: 21
Re: Displaylink: external displays keep crashing
seth wrote:
You're building that package anyway (I hope yay allows you to inspect and edit the PKGBUILD)
Yeah sorry you were totally right, I just never used that option and actually edited anything. I did now, but unfortunately the result is the same.
Offline
#22 2024-01-05 20:38:23
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 74,325
Re: Displaylink: external displays keep crashing
Did it build and install a DDX driver and are you currently using it?
Offline