You are not logged in.

Pages: 1

#1 2024-01-05 11:35:01

sanrei
Member
Registered: 2024-01-04
Posts: 6

[SOLVED] startx error

I tried startx but a few days before there was no problem, then there was a time when I updated the system, I don't know what changed but it was so sucks, I panicked in short I decided to reinstall arch which damn nothing changed and now I use sddm (temporarily).

https://i.pinimg.com/564x/93/45/35/9345 … 864145.jpg

error:
 X.Org X Server 1.21.1.10

X Protocol Version 11, Revision O

Current Operating Systen: Linux ore 6.6.9-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Tue, 02 Jan 2024 02:28:04 +0000 x86_64
Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=c6d11c14-4763-4470-94be-430089734121 rw rootflags=subvol=@ loglevel=3 quiet

Current version of pixman: 0.12.2

Before reporting problems, check [url]http://wiki.x.org[/url]

to make sure that you have the latest version.

Markers : (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) Informational.
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/home/sarel/.local/share/xorg/xorg.0.1 log", Time: Fri Jan 5 04:15:46 2024
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"

xf86EnableIO: failed to comble I/0 ports 0000-03ff (Operation not permitted) The XKEYBOARD keymap compiler (xkbcomp) reports:

> Warning: Could set resolve keysym XF86CameraAccessEnable 
> Warning: Could not resolve keysym XFB6CameraAccessDisable waiting for X server to shut down (II) Server terminated successfully (0). Closing log file tuld not resolve keysym XF86NavInfoErrors from xkbcomp are not fatal to the X

log file

~/.local/share/xorg/Xorg.0.log

[     7.758] 
X.Org X Server 1.21.1.10
X Protocol Version 11, Revision 0
[     7.758] Current Operating System: Linux ore 6.6.9-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Tue, 02 Jan 2024 02:28:04 +0000 x86_64
[     7.758] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=c6d11c14-4763-4a70-94be-43008973d121 rw rootflags=subvol=@ loglevel=3 quiet
[     7.759]  
[     7.759] Current version of pixman: 0.42.2
[     7.759] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[     7.759] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.759] (==) Log file: "/home/sanrei/.local/share/xorg/Xorg.0.log", Time: Fri Jan  5 06:40:17 2024
[     7.760] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     7.760] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.760] (==) No Layout section.  Using the first Screen section.
[     7.760] (==) No screen section available. Using defaults.
[     7.760] (**) |-->Screen "Default Screen Section" (0)
[     7.760] (**) |   |-->Monitor "<default monitor>"
[     7.760] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     7.760] (**) Option "DontZap" "false"
[     7.760] (==) Automatically adding devices
[     7.760] (==) Automatically enabling devices
[     7.760] (==) Automatically adding GPU devices
[     7.760] (==) Automatically binding GPU devices
[     7.760] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     7.761] 	Entry deleted from font path.
[     7.761] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     7.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     7.761] 	Entry deleted from font path.
[     7.761] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     7.761] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     7.761] 	Entry deleted from font path.
[     7.761] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     7.761] 	Entry deleted from font path.
[     7.761] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     7.761] 	Entry deleted from font path.
[     7.761] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     7.761] 	Entry deleted from font path.
[     7.761] (==) FontPath set to:
	
[     7.761] (==) ModulePath set to "/usr/lib/xorg/modules"
[     7.761] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.761] (II) Module ABI versions:
[     7.761] 	X.Org ANSI C Emulation: 0.4
[     7.761] 	X.Org Video Driver: 25.2
[     7.761] 	X.Org XInput driver : 24.4
[     7.761] 	X.Org Server Extension : 10.0
[     7.762] (++) using VT number 1

[     7.763] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[     7.764] (II) xfree86: Adding drm device (/dev/dri/card1)
[     7.764] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[     7.765] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[     7.767] (--) PCI:*(0@0:2:0) 8086:9b41:103c:8658 rev 2, Mem @ 0xb0000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     7.767] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     7.768] (II) LoadModule: "glx"
[     7.768] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.776] (II) Module glx: vendor="X.Org Foundation"
[     7.776] 	compiled for 1.21.1.10, module version = 1.0.0
[     7.776] 	ABI class: X.Org Server Extension, version 10.0
[     7.776] (==) Matched intel as autoconfigured driver 0
[     7.776] (==) Matched modesetting as autoconfigured driver 1
[     7.776] (==) Matched fbdev as autoconfigured driver 2
[     7.776] (==) Matched vesa as autoconfigured driver 3
[     7.776] (==) Assigned the driver to the xf86ConfigLayout
[     7.776] (II) LoadModule: "intel"
[     7.776] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     7.780] (II) Module intel: vendor="X.Org Foundation"
[     7.780] 	compiled for 1.21.1.6, module version = 2.99.917
[     7.780] 	Module class: X.Org Video Driver
[     7.780] 	ABI class: X.Org Video Driver, version 25.2
[     7.780] (II) LoadModule: "modesetting"
[     7.780] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.784] (II) Module modesetting: vendor="X.Org Foundation"
[     7.784] 	compiled for 1.21.1.10, module version = 1.21.1
[     7.784] 	Module class: X.Org Video Driver
[     7.784] 	ABI class: X.Org Video Driver, version 25.2
[     7.784] (II) LoadModule: "fbdev"
[     7.784] (WW) Warning, couldn't open module fbdev
[     7.784] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     7.784] (II) LoadModule: "vesa"
[     7.784] (WW) Warning, couldn't open module vesa
[     7.784] (EE) Failed to load module "vesa" (module does not exist, 0)
[     7.784] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     7.785] (II) intel: Driver for Intel(R) HD Graphics
[     7.785] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     7.785] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     7.785] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.785] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[     7.785] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[     7.785] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[     7.785] (WW) Falling back to old probe method for modesetting
[     7.785] (EE) open /dev/dri/card0: No such file or directory
[     7.785] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[     7.785] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     7.785] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     7.785] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.785] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     7.785] (==) intel(0): RGB weight 888
[     7.785] (==) intel(0): Default visual is TrueColor
[     7.786] (II) intel(0): Output eDP1 has no monitor section
[     7.787] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     7.787] (II) intel(0): Enabled output eDP1
[     7.787] (II) intel(0): Output HDMI1 has no monitor section
[     7.787] (II) intel(0): Enabled output HDMI1
[     7.787] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     7.787] (II) intel(0): Output VIRTUAL1 has no monitor section
[     7.787] (II) intel(0): Enabled output VIRTUAL1
[     7.787] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[     7.787] (==) intel(0): TearFree enabled
[     7.787] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.787] (==) intel(0): DPI set to (96, 96)
[     7.788] (II) Loading sub module "dri3"
[     7.788] (II) LoadModule: "dri3"
[     7.788] (II) Module "dri3" already built-in
[     7.788] (II) Loading sub module "dri2"
[     7.788] (II) LoadModule: "dri2"
[     7.788] (II) Module "dri2" already built-in
[     7.788] (II) Loading sub module "present"
[     7.788] (II) LoadModule: "present"
[     7.788] (II) Module "present" already built-in
[     7.788] (II) UnloadModule: "modesetting"
[     7.788] (II) Unloading modesetting
[     7.788] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[     7.788] (==) intel(0): Backing store enabled
[     7.788] (==) intel(0): Silken mouse enabled
[     7.788] (II) intel(0): HW Cursor enabled
[     7.789] (==) intel(0): DPMS enabled
[     7.789] (==) intel(0): Display hotplug detection enabled
[     7.789] (II) intel(0): [DRI2] Setup complete
[     7.789] (II) intel(0): [DRI2]   DRI driver: i965
[     7.789] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     7.789] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     7.789] (II) intel(0): hardware support for Present enabled
[     7.789] (II) Initializing extension Generic Event Extension
[     7.789] (II) Initializing extension SHAPE
[     7.789] (II) Initializing extension MIT-SHM
[     7.789] (II) Initializing extension XInputExtension
[     7.790] (II) Initializing extension XTEST
[     7.790] (II) Initializing extension BIG-REQUESTS
[     7.790] (II) Initializing extension SYNC
[     7.790] (II) Initializing extension XKEYBOARD
[     7.790] (II) Initializing extension XC-MISC
[     7.790] (II) Initializing extension SECURITY
[     7.791] (II) Initializing extension XFIXES
[     7.791] (II) Initializing extension RENDER
[     7.791] (II) Initializing extension RANDR
[     7.791] (II) Initializing extension COMPOSITE
[     7.791] (II) Initializing extension DAMAGE
[     7.791] (II) Initializing extension MIT-SCREEN-SAVER
[     7.792] (II) Initializing extension DOUBLE-BUFFER
[     7.792] (II) Initializing extension RECORD
[     7.792] (II) Initializing extension DPMS
[     7.792] (II) Initializing extension Present
[     7.792] (II) Initializing extension DRI3
[     7.792] (II) Initializing extension X-Resource
[     7.792] (II) Initializing extension XVideo
[     7.793] (II) Initializing extension XVideo-MotionCompensation
[     7.793] (II) Initializing extension GLX
[     7.793] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[     7.793] (EE) AIGLX error: unable to load driver i965
[     8.016] (II) IGLX: Loaded and initialized swrast
[     8.016] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     8.016] (II) Initializing extension XFree86-VidModeExtension
[     8.017] (II) Initializing extension XFree86-DGA
[     8.017] (II) Initializing extension XFree86-DRI
[     8.017] (II) Initializing extension DRI2
[     8.018] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     8.026] (II) intel(0): Setting screen physical size to 361 x 203
[     8.058] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     8.058] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.058] (**) Power Button: Applying InputClass "Keyboard Defaults"
[     8.058] (II) LoadModule: "libinput"
[     8.058] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     8.061] (II) Module libinput: vendor="X.Org Foundation"
[     8.061] 	compiled for 1.21.1.8, module version = 1.4.0
[     8.061] 	Module class: X.Org XInput Driver
[     8.061] 	ABI class: X.Org XInput driver, version 24.4
[     8.061] (II) Using input driver 'libinput' for 'Power Button'
[     8.061] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[     8.061] (**) Power Button: always reports core events
[     8.061] (**) Option "Device" "/dev/input/event2"
[     8.064] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     8.064] (II) event2  - Power Button: device is a keyboard
[     8.065] (II) event2  - Power Button: device removed
[     8.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     8.065] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.065] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     8.080] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     8.080] (II) event2  - Power Button: device is a keyboard
[     8.081] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     8.081] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     8.081] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[     8.081] (II) Using input driver 'libinput' for 'Video Bus'
[     8.081] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[     8.081] (**) Video Bus: always reports core events
[     8.081] (**) Option "Device" "/dev/input/event4"
[     8.082] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     8.082] (II) event4  - Video Bus: device is a keyboard
[     8.082] (II) event4  - Video Bus: device removed
[     8.082] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[     8.082] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.082] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     8.083] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     8.083] (II) event4  - Video Bus: device is a keyboard
[     8.083] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     8.083] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.083] (**) Power Button: Applying InputClass "Keyboard Defaults"
[     8.083] (II) Using input driver 'libinput' for 'Power Button'
[     8.083] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[     8.083] (**) Power Button: always reports core events
[     8.083] (**) Option "Device" "/dev/input/event1"
[     8.084] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     8.084] (II) event1  - Power Button: device is a keyboard
[     8.084] (II) event1  - Power Button: device removed
[     8.084] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     8.084] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     8.084] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     8.085] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     8.085] (II) event1  - Power Button: device is a keyboard
[     8.085] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     8.085] (II) No input driver specified, ignoring this device.
[     8.085] (II) This device may have been added with another device file.
[     8.086] (II) config/udev: Adding input device ELAN0703:00 04F3:31BF Mouse (/dev/input/event7)
[     8.086] (**) ELAN0703:00 04F3:31BF Mouse: Applying InputClass "libinput pointer catchall"
[     8.086] (II) Using input driver 'libinput' for 'ELAN0703:00 04F3:31BF Mouse'
[     8.086] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 28 paused 0
[     8.086] (**) ELAN0703:00 04F3:31BF Mouse: always reports core events
[     8.086] (**) Option "Device" "/dev/input/event7"
[     8.087] (II) event7  - ELAN0703:00 04F3:31BF Mouse: is tagged by udev as: Mouse Pointingstick
[     8.087] (II) event7  - ELAN0703:00 04F3:31BF Mouse: device is a pointer
[     8.088] (II) event7  - ELAN0703:00 04F3:31BF Mouse: device removed
[     8.088] (II) libinput: ELAN0703:00 04F3:31BF Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     8.088] (II) libinput: ELAN0703:00 04F3:31BF Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     8.088] (II) libinput: ELAN0703:00 04F3:31BF Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     8.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0703:00/0018:04F3:31BF.0001/input/input10/event7"
[     8.088] (II) XINPUT: Adding extended input device "ELAN0703:00 04F3:31BF Mouse" (type: MOUSE, id 9)
[     8.088] (**) Option "AccelerationScheme" "none"
[     8.088] (**) ELAN0703:00 04F3:31BF Mouse: (accel) selected scheme none/0
[     8.088] (**) ELAN0703:00 04F3:31BF Mouse: (accel) acceleration factor: 2.000
[     8.088] (**) ELAN0703:00 04F3:31BF Mouse: (accel) acceleration threshold: 4
[     8.089] (II) event7  - ELAN0703:00 04F3:31BF Mouse: is tagged by udev as: Mouse Pointingstick
[     8.089] (II) event7  - ELAN0703:00 04F3:31BF Mouse: device is a pointer
[     8.089] (II) config/udev: Adding input device ELAN0703:00 04F3:31BF Mouse (/dev/input/mouse0)
[     8.089] (II) No input driver specified, ignoring this device.
[     8.089] (II) This device may have been added with another device file.
[     8.090] (II) config/udev: Adding input device ELAN0703:00 04F3:31BF Touchpad (/dev/input/event8)
[     8.090] (**) ELAN0703:00 04F3:31BF Touchpad: Applying InputClass "libinput touchpad catchall"
[     8.090] (**) ELAN0703:00 04F3:31BF Touchpad: Applying InputClass "touchpad"
[     8.090] (II) Using input driver 'libinput' for 'ELAN0703:00 04F3:31BF Touchpad'
[     8.090] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 29 paused 0
[     8.090] (**) ELAN0703:00 04F3:31BF Touchpad: always reports core events
[     8.090] (**) Option "Device" "/dev/input/event8"
[     8.091] (II) event8  - ELAN0703:00 04F3:31BF Touchpad: is tagged by udev as: Touchpad
[     8.092] (II) event8  - ELAN0703:00 04F3:31BF Touchpad: device is a touchpad
[     8.093] (II) event8  - ELAN0703:00 04F3:31BF Touchpad: device removed
[     8.093] (**) Option "Tapping" "on"
[     8.093] (II) libinput: ELAN0703:00 04F3:31BF Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[     8.093] (II) libinput: ELAN0703:00 04F3:31BF Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[     8.093] (II) libinput: ELAN0703:00 04F3:31BF Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[     8.093] (**) Option "NaturalScrolling" "true"
[     8.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN0703:00/0018:04F3:31BF.0001/input/input12/event8"
[     8.093] (II) XINPUT: Adding extended input device "ELAN0703:00 04F3:31BF Touchpad" (type: TOUCHPAD, id 10)
[     8.094] (**) Option "AccelerationScheme" "none"
[     8.094] (**) ELAN0703:00 04F3:31BF Touchpad: (accel) selected scheme none/0
[     8.094] (**) ELAN0703:00 04F3:31BF Touchpad: (accel) acceleration factor: 2.000
[     8.094] (**) ELAN0703:00 04F3:31BF Touchpad: (accel) acceleration threshold: 4
[     8.094] (II) event8  - ELAN0703:00 04F3:31BF Touchpad: is tagged by udev as: Touchpad
[     8.095] (II) event8  - ELAN0703:00 04F3:31BF Touchpad: device is a touchpad
[     8.096] (II) config/udev: Adding input device ELAN0703:00 04F3:31BF Touchpad (/dev/input/mouse1)
[     8.096] (**) ELAN0703:00 04F3:31BF Touchpad: Applying InputClass "touchpad"
[     8.096] (II) Using input driver 'libinput' for 'ELAN0703:00 04F3:31BF Touchpad'
[     8.096] (**) ELAN0703:00 04F3:31BF Touchpad: always reports core events
[     8.096] (**) Option "Device" "/dev/input/mouse1"
[     8.096] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse1
	Permission denied.
[     8.096] (II) mouse1: opening input device '/dev/input/mouse1' failed (Permission denied).
[     8.096] (II) mouse1  - failed to create input device '/dev/input/mouse1'.
[     8.096] (EE) libinput: ELAN0703:00 04F3:31BF Touchpad: Failed to create a device for /dev/input/mouse1
[     8.096] (EE) PreInit returned 2 for "ELAN0703:00 04F3:31BF Touchpad"
[     8.096] (II) UnloadModule: "libinput"
[     8.096] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[     8.096] (II) No input driver specified, ignoring this device.
[     8.096] (II) This device may have been added with another device file.
[     8.097] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[     8.097] (II) No input driver specified, ignoring this device.
[     8.097] (II) This device may have been added with another device file.
[     8.097] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[     8.097] (II) No input driver specified, ignoring this device.
[     8.097] (II) This device may have been added with another device file.
[     8.097] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[     8.097] (II) No input driver specified, ignoring this device.
[     8.097] (II) This device may have been added with another device file.
[     8.097] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[     8.097] (II) No input driver specified, ignoring this device.
[     8.097] (II) This device may have been added with another device file.
[     8.098] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     8.098] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     8.098] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[     8.098] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     8.098] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
[     8.098] (**) AT Translated Set 2 keyboard: always reports core events
[     8.098] (**) Option "Device" "/dev/input/event3"
[     8.099] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     8.099] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     8.099] (II) event3  - AT Translated Set 2 keyboard: device removed
[     8.099] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     8.099] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     8.099] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     8.100] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     8.100] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     8.101] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     8.101] (II) No input driver specified, ignoring this device.
[     8.101] (II) This device may have been added with another device file.
[     8.102] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event14)
[     8.102] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     8.102] (**) HP WMI hotkeys: Applying InputClass "Keyboard Defaults"
[     8.102] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     8.103] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 31 paused 0
[     8.103] (**) HP WMI hotkeys: always reports core events
[     8.103] (**) Option "Device" "/dev/input/event14"
[     8.103] (II) event14 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     8.103] (II) event14 - HP WMI hotkeys: device is a keyboard
[     8.103] (II) event14 - HP WMI hotkeys: device removed
[     8.103] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event14"
[     8.103] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[     8.103] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     8.104] (II) event14 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     8.104] (II) event14 - HP WMI hotkeys: device is a keyboard
[     8.104] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event5)
[     8.104] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[     8.104] (**) Wireless hotkeys: Applying InputClass "Keyboard Defaults"
[     8.104] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[     8.105] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[     8.105] (**) Wireless hotkeys: always reports core events
[     8.105] (**) Option "Device" "/dev/input/event5"
[     8.105] (II) event5  - Wireless hotkeys: is tagged by udev as: Keyboard
[     8.105] (II) event5  - Wireless hotkeys: device is a keyboard
[     8.106] (II) event5  - Wireless hotkeys: device removed
[     8.106] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[     8.106] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 13)
[     8.106] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     8.106] (II) event5  - Wireless hotkeys: is tagged by udev as: Keyboard
[     8.106] (II) event5  - Wireless hotkeys: device is a keyboard
[     8.154] (**) Option "fd" "23"
[     8.154] (II) event2  - Power Button: device removed
[     8.154] (**) Option "fd" "26"
[     8.154] (II) event4  - Video Bus: device removed
[     8.154] (**) Option "fd" "27"
[     8.154] (II) event1  - Power Button: device removed
[     8.154] (**) Option "fd" "28"
[     8.154] (II) event7  - ELAN0703:00 04F3:31BF Mouse: device removed
[     8.154] (**) Option "fd" "29"
[     8.154] (II) event8  - ELAN0703:00 04F3:31BF Touchpad: device removed
[     8.154] (**) Option "fd" "30"
[     8.154] (II) event3  - AT Translated Set 2 keyboard: device removed
[     8.154] (**) Option "fd" "31"
[     8.154] (II) event14 - HP WMI hotkeys: device removed
[     8.154] (**) Option "fd" "32"
[     8.154] (II) event5  - Wireless hotkeys: device removed
[     8.155] (II) UnloadModule: "libinput"
[     8.155] (II) systemd-logind: releasing fd for 13:69
[     8.155] (II) UnloadModule: "libinput"
[     8.155] (II) systemd-logind: releasing fd for 13:78
[     8.156] (II) UnloadModule: "libinput"
[     8.156] (II) systemd-logind: releasing fd for 13:67
[     8.156] (II) UnloadModule: "libinput"
[     8.156] (II) systemd-logind: releasing fd for 13:72
[     8.156] (II) UnloadModule: "libinput"
[     8.156] (II) systemd-logind: releasing fd for 13:71
[     8.156] (II) UnloadModule: "libinput"
[     8.156] (II) systemd-logind: releasing fd for 13:65
[     8.157] (II) UnloadModule: "libinput"
[     8.157] (II) systemd-logind: releasing fd for 13:68
[     8.157] (II) UnloadModule: "libinput"
[     8.157] (II) systemd-logind: releasing fd for 13:66
[     8.176] (II) Server terminated successfully (0). Closing log file.

my conf

~/.xinitrc

#!/bin/sh

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

exec bpwm

im new in here, fix quote post

Last edited by sanrei (2024-01-06 14:31:45)

Offline

#2 2024-01-05 12:52:17

2ManyDogs
Forum Fellow
Registered: 2012-01-15
Posts: 4,645

Re: [SOLVED] startx error

Please edit your post and use [ code ] tags (not quote tags) when posting output. This makes the output easier to read and provides a scroll box for long output.

https://wiki.archlinux.org/title/Genera … s_and_code
https://bbs.archlinux.org/help.php#bbcode

Offline

#3 2024-01-05 13:08:01

Raynman
Member
Registered: 2011-10-22
Posts: 1,539

Re: [SOLVED] startx error

I see only warnings, not errors, and then a successful termination of the X server. With the multitude of WMs out there, I wouldn't be surprised if "bpwm" actually exists, but a typo seems more likely.

Offline

#4 2024-01-05 13:25:28

sanrei
Member
Registered: 2024-01-04
Posts: 6

Re: [SOLVED] startx error

Raynman wrote:

I see only warnings, not errors, and then a successful termination of the X server. With the multitude of WMs out there, I wouldn't be surprised if "bpwm" actually exists, but a typo seems more likely.

does it happen xorg in /etc/X11/xorg.conf.d/

here are some related files (all included)

10-quirks.conf

# Collection of quirks and blacklist/whitelists for specific devices.


# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442 
Section "InputClass"
        Identifier "ThinkPad HDAPS accelerometer blacklist"
        MatchProduct "ThinkPad HDAPS accelerometer data"
        Option "Ignore" "on"
EndSection

# https://bugzilla.redhat.com/show_bug.cgi?id=523914
# Mouse does not move in PV Xen guest
# Explicitly tell evdev to not ignore the absolute axes.
Section "InputClass"
        Identifier "Xen Virtual Pointer axis blacklist"
        MatchProduct "Xen Virtual Pointer"
        Option "IgnoreAbsoluteAxes" "off"
        Option "IgnoreRelativeAxes" "off"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=55867
# Bug 55867 - Doesn't know how to tag XI_TRACKBALL
Section "InputClass"
        Identifier "Tag trackballs as XI_TRACKBALL"
        MatchProduct "trackball"
        MatchDriver "evdev"
        Option "TypeName" "TRACKBALL"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=62831
# Bug 62831 - Mionix Naos 5000 mouse detected incorrectly
Section "InputClass"
        Identifier "Tag Mionix Naos 5000 mouse XI_MOUSE"
        MatchProduct "La-VIEW Technology Naos 5000 Mouse"
        MatchDriver "evdev"
        Option "TypeName" "MOUSE"
EndSection

20-intel.conf

Section "Device"
	Identifier	"Intel Graphics"
	Driver		"Intel"
	Option		"AccelMethod"	"sna"
	Option		"DRI"		"3"
	Option		"TearFree"	"true"
	Option 		"TripleBuffer" "true"
EndSection

30-touchpad.conf

Section "InputClass"
    Identifier "touchpad"
    Driver "libinput"
    MatchIsTouchpad "on"
    Option "Tapping" "on"
    Option "NaturalScrolling" "true"
EndSection

40-libinput.conf

# Match on all types of devices but joysticks
#
# If you want to configure your devices, do not copy this file.
# Instead, use a config snippet that contains something like this:
#
# Section "InputClass"
#   Identifier "something or other"
#   MatchDriver "libinput"
#
#   MatchIsTouchpad "on"
#   ... other Match directives ...
#   Option "someoption" "value"
# EndSection
#
# This applies the option any libinput device also matched by the other
# directives. See the xorg.conf(5) man page for more info on
# matching devices.

Section "InputClass"
        Identifier "libinput pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

99-killx.conf

Section "ServerFlags"
   Option "DontZap" "false"
EndSection

Section "InputClass"
   Identifier      "Keyboard Defaults"
   MatchIsKeyboard   "yes"
   Option         "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

Offline

#5 2024-01-05 13:34:14

seth
Member
Registered: 2012-09-03
Posts: 51,679

Re: [SOLVED] startx error

W/ a cometlake IGP you absolutely don't want to use xf86-video-intell, get rid of that and the config referencing it.
Your xinitrc is irrelevant w/ SDDM, but otherwise

Raynman wrote:

"bpwm" … a typo

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2024-01-06 13:40:13

sanrei
Member
Registered: 2024-01-04
Posts: 6

Re: [SOLVED] startx error

seth wrote:

W/ a cometlake IGP you absolutely don't want to use xf86-video-intell, get rid of that and the config referencing it.
Your xinitrc is irrelevant w/ SDDM, but otherwise

Raynman wrote:

"bpwm" … a typo

image.jpg
damn turned I just fucking typo in exec bspwm thanks for the help dude,  I just remembered this happened when I moved to awesome wm. lol

Offline

#7 2024-01-06 14:18:40

seth
Member
Registered: 2012-09-03
Posts: 51,679

Re: [SOLVED] startx error

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2024-01-06 14:20:50

sanrei
Member
Registered: 2024-01-04
Posts: 6

Re: [SOLVED] startx error

seth wrote:

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

how do I edit post?

Offline

#9 2024-01-06 14:23:01

seth
Member
Registered: 2012-09-03
Posts: 51,679

Re: [SOLVED] startx error

Link in the lower right corner?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2024-01-06 14:27:29

sanrei
Member
Registered: 2024-01-04
Posts: 6

Re: [SOLVED] startx error

seth wrote:

Link in the lower right corner?

ok

Last edited by sanrei (2024-01-06 19:45:57)

Offline

Pages: 1

Board footer

Powered by FluxBB