2nd disk not recognised by arch (drivers issue?)

MeuhMeuh62 · 2024-01-07 12:17:25

Hello,
I have a problem with arch linux my 2nd disk into my laptop are not recognised i have 2ssd nvme same brand same model.
I am in dualboot on the 1st disk windows and arch linux and the 2nd is recognised by windows but not by arch, idk why.

When i lsblk i see my 1st disk but not the 2nd :

[tom@ArchLinuxKDE ~]$ lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
nvme0n1     259:0    0 953,9G  0 disk 
├─nvme0n1p1 259:1    0   499M  0 part 
├─nvme0n1p2 259:2    0    99M  0 part 
├─nvme0n1p3 259:3    0    16M  0 part 
├─nvme0n1p4 259:4    0 860,1G  0 part /run/media/tom/9A583C89583C65E3     -|(windows partition)
├─nvme0n1p5 259:5    0  1013M  0 part 
├─nvme0n1p6 259:6    0    30G  0 part /          -|
├─nvme0n1p7 259:7    0    30G  0 part /home      -|(linux partition)
└─nvme0n1p8 259:8    0   8,4G  0 part [SWAP]     -|

Is it an driver issue or something else?
I will entirely install arch on my laptop so i need to know how i can found my 2nd disk on linux?
Thank you

loqs · 2024-01-07 12:20:09

Please post the full output from `dmesg`.

MeuhMeuh62 · 2024-01-07 12:23:12

[    0.009713]   node   0: [mem 0x0000000040fe1000-0x000000005b97efff]
[    0.009714]   node   0: [mem 0x0000000066dff000-0x0000000066dfffff]
[    0.009715]   node   0: [mem 0x0000000100000000-0x000000088d7fffff]
[    0.009719] Initmem setup node 0 [mem 0x0000000000001000-0x000000088d7fffff]
[    0.009722] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009724] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009743] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.011576] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.012094] On node 0, zone DMA32: 46208 pages in unavailable ranges
[    0.051516] On node 0, zone Normal: 4608 pages in unavailable ranges
[    0.051632] On node 0, zone Normal: 10240 pages in unavailable ranges
[    0.051672] Reserving Intel graphics memory at [mem 0x6a800000-0x6e7fffff]
[    0.052233] ACPI: PM-Timer IO Port: 0x1808
[    0.052239] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.052241] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.052242] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.052242] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.052243] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.052244] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.052244] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.052245] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.052246] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.052246] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.052247] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.052248] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.052283] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.052286] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.052287] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.052291] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.052292] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.052299] e820: update [mem 0x4e833000-0x4ea55fff] usable ==> reserved
[    0.052311] TSC deadline timer available
[    0.052312] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.052335] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.052337] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.052339] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.052341] PM: hibernation: Registered nosave memory: [mem 0x3f82c000-0x3f82cfff]
[    0.052343] PM: hibernation: Registered nosave memory: [mem 0x3f83c000-0x3f83cfff]
[    0.052344] PM: hibernation: Registered nosave memory: [mem 0x3f83d000-0x3f83dfff]
[    0.052346] PM: hibernation: Registered nosave memory: [mem 0x3f85a000-0x3f85afff]
[    0.052347] PM: hibernation: Registered nosave memory: [mem 0x40fdf000-0x40fdffff]
[    0.052348] PM: hibernation: Registered nosave memory: [mem 0x40fe0000-0x40fe0fff]
[    0.052350] PM: hibernation: Registered nosave memory: [mem 0x4e833000-0x4ea55fff]
[    0.052352] PM: hibernation: Registered nosave memory: [mem 0x5b97f000-0x6397efff]
[    0.052353] PM: hibernation: Registered nosave memory: [mem 0x6397f000-0x63a2efff]
[    0.052353] PM: hibernation: Registered nosave memory: [mem 0x63a2f000-0x63ceefff]
[    0.052354] PM: hibernation: Registered nosave memory: [mem 0x63cef000-0x66dfefff]
[    0.052356] PM: hibernation: Registered nosave memory: [mem 0x66e00000-0x6e7fffff]
[    0.052357] PM: hibernation: Registered nosave memory: [mem 0x6e800000-0xefffffff]
[    0.052357] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.052358] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.052359] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.052359] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.052360] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.052361] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.052361] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.052362] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.052362] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.052366] [mem 0x6e800000-0xefffffff] available for PCI devices
[    0.052367] Booting paravirtualized kernel on bare hardware
[    0.052370] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.057614] setup_percpu: NR_CPUS:320 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[    0.057880] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.057888] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.057890] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
[    0.057916] Fallback order for Node 0: 0 
[    0.057918] Built 1 zonelists, mobility grouping on.  Total pages: 8164920
[    0.057920] Policy zone: Normal
[    0.057920] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=de1263f0-3d4e-4d78-8220-ee6b71b5c3b8 rw loglevel=3 quiet
[    0.057982] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
[    0.059367] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.060041] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.060238] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.060246] software IO TLB: area num 16.
[    0.118456] Memory: 32335864K/33178736K available (16391K kernel code, 2139K rwdata, 11488K rodata, 2152K init, 5344K bss, 842612K reserved, 0K cma-reserved)
[    0.118579] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.118606] ftrace: allocating 46529 entries in 182 pages
[    0.125848] ftrace: allocated 182 pages with 5 groups
[    0.126482] Dynamic Preempt: voluntary
[    0.126522] rcu: Preemptible hierarchical RCU implementation.
[    0.126522] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[    0.126523]  Trampoline variant of Tasks RCU enabled.
[    0.126524]  Rude variant of Tasks RCU enabled.
[    0.126524]  Tracing variant of Tasks RCU enabled.
[    0.126525] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.126526] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.130703] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[    0.130956] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.131205] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.131232] Console: colour dummy device 80x25
[    0.131258] printk: console [tty0] enabled
[    0.131277] ACPI: Core revision 20220331
[    0.131646] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.131647] APIC: Switch to symmetric I/O mode setup
[    0.131649] DMAR: Host address width 39
[    0.131650] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.131655] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.131658] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.131661] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.131662] DMAR: RMRR base: 0x000000662c2000 end: 0x0000006650bfff
[    0.131664] DMAR: RMRR base: 0x0000006a000000 end: 0x0000006e7fffff
[    0.131665] DMAR: RMRR base: 0x000000638be000 end: 0x0000006393dfff
[    0.131666] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.131668] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.131669] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.133292] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.133294] x2apic enabled
[    0.133318] Switched APIC routing to cluster x2apic.
[    0.137727] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns
[    0.137732] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.18 BogoMIPS (lpj=9333090)
[    0.137758] x86/cpu: SGX disabled by BIOS.
[    0.137762] CPU0: Thermal monitoring enabled (TM1)
[    0.137799] process: using mwait in idle threads
[    0.137801] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.137802] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.137805] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.137806] Spectre V2 : Mitigation: Enhanced IBRS
[    0.137807] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.137807] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.137808] RETBleed: Mitigation: Enhanced IBRS
[    0.137809] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.137810] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.137813] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.137815] SRBDS: Mitigation: Microcode
[    0.137816] GDS: Mitigation: Microcode
[    0.137821] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.137822] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.137823] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.137823] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.137824] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.137825] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.137826] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.137827] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.137828] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.137829] x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
[    0.137830] x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
[    0.141064] Freeing SMP alternatives memory: 40K
[    0.141064] pid_max: default: 32768 minimum: 301
[    0.141064] LSM: Security Framework initializing
[    0.141064] landlock: Up and running.
[    0.141064] Yama: becoming mindful.
[    0.141064] LSM support for eBPF active
[    0.141064] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.141064] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.141064] smpboot: CPU0: Intel(R) Xeon(R) W-10855M CPU @ 2.80GHz (family: 0x6, model: 0xa5, stepping: 0x2)
[    0.141064] cblist_init_generic: Setting adjustable number of callback queues.
[    0.141064] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.141064] cblist_init_generic: Setting adjustable number of callback queues.
[    0.141064] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.141064] cblist_init_generic: Setting adjustable number of callback queues.
[    0.141064] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.141064] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.141064] ... version:                4
[    0.141064] ... bit width:              48
[    0.141064] ... generic registers:      4
[    0.141064] ... value mask:             0000ffffffffffff
[    0.141064] ... max period:             00007fffffffffff
[    0.141064] ... fixed-purpose events:   3
[    0.141064] ... event mask:             000000070000000f
[    0.141064] signal: max sigframe size: 3632
[    0.141064] Estimated ratio of average max frequency by base frequency (times 1024): 1755
[    0.141064] rcu: Hierarchical SRCU implementation.
[    0.141064] rcu:     Max phase no-delay instances is 1000.
[    0.141064] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.141064] smp: Bringing up secondary CPUs ...
[    0.141064] x86: Booting SMP configuration:
[    0.141064] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.148365] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.148365]   #7  #8  #9 #10 #11
[    0.151613] smp: Brought up 1 node, 12 CPUs
[    0.151613] smpboot: Max logical packages: 1
[    0.151613] smpboot: Total of 12 processors activated (67225.17 BogoMIPS)
[    0.155304] devtmpfs: initialized
[    0.155304] x86/mm: Memory block size: 128MB
[    0.155941] ACPI: PM: Registering ACPI NVS region [mem 0x40fdf000-0x40fdffff] (4096 bytes)
[    0.155941] ACPI: PM: Registering ACPI NVS region [mem 0x63a2f000-0x63ceefff] (2883584 bytes)
[    0.155941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.155941] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.155941] pinctrl core: initialized pinctrl subsystem
[    0.155941] PM: RTC time: 12:21:46, date: 2024-01-07
[    0.155941] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.157905] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.158115] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.158338] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.158352] audit: initializing netlink subsys (disabled)
[    0.158370] audit: type=2000 audit(1704630106.019:1): state=initialized audit_enabled=0 res=1
[    0.158370] thermal_sys: Registered thermal governor 'fair_share'
[    0.158370] thermal_sys: Registered thermal governor 'bang_bang'
[    0.158370] thermal_sys: Registered thermal governor 'step_wise'
[    0.158370] thermal_sys: Registered thermal governor 'user_space'
[    0.158370] thermal_sys: Registered thermal governor 'power_allocator'
[    0.158370] cpuidle: using governor ladder
[    0.158370] cpuidle: using governor menu
[    0.158370] Simple Boot Flag at 0x47 set to 0x80
[    0.158370] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.158370] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.158370] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.158370] PCI: Using configuration type 1 for base access
[    0.158370] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.158937] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.164406] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.164408] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.164409] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.164410] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.165284] ACPI: Added _OSI(Module Device)
[    0.165284] ACPI: Added _OSI(Processor Device)
[    0.165284] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.165284] ACPI: Added _OSI(Processor Aggregator Device)
[    0.231209] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.290080] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.297988] ACPI: Dynamic OEM Table Load:
[    0.297999] ACPI: SSDT 0xFFFF9C8801A1BC00 0000FC (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.299019] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.299937] ACPI: Dynamic OEM Table Load:
[    0.299946] ACPI: SSDT 0xFFFF9C8801AD8000 000416 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.301060] ACPI: Dynamic OEM Table Load:
[    0.301070] ACPI: SSDT 0xFFFF9C8801ADD000 0005C3 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.302277] ACPI: Dynamic OEM Table Load:
[    0.302284] ACPI: SSDT 0xFFFF9C88019E2200 00016C (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.303324] ACPI: Dynamic OEM Table Load:
[    0.303332] ACPI: SSDT 0xFFFF9C88011AA000 000BEA (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.304591] ACPI: Dynamic OEM Table Load:
[    0.304598] ACPI: SSDT 0xFFFF9C8801AD9800 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.305685] ACPI: Dynamic OEM Table Load:
[    0.305691] ACPI: SSDT 0xFFFF9C88011A0000 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.306751] ACPI: Dynamic OEM Table Load:
[    0.306758] ACPI: SSDT 0xFFFF9C88011A9000 000D22 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.308483] ACPI: Dynamic OEM Table Load:
[    0.308490] ACPI: SSDT 0xFFFF9C88011A6C00 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.312861] ACPI: EC: EC started
[    0.312862] ACPI: EC: interrupt blocked
[    0.319813] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.319817] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.319818] ACPI: Interpreter enabled
[    0.319858] ACPI: PM: (supports S0 S3 S4 S5)
[    0.319859] ACPI: Using IOAPIC for interrupt routing
[    0.319937] HEST: Table parsing has been initialized.
[    0.319983] GHES: APEI firmware first mode is enabled by APEI bit.
[    0.319986] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.319986] PCI: Ignoring E820 reservations for host bridge windows
[    0.320431] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.322367] ACPI: PM: Power Resource [PG00]
[    0.430266] ACPI: PM: Power Resource [PXP]
[    0.442026] ACPI: PM: Power Resource [BTPR]
[    0.443564] ACPI: PM: Power Resource [USBC]
[    0.443725] ACPI: PM: Power Resource [PAUD]
[    0.446687] ACPI: PM: Power Resource [V0PR]
[    0.446862] ACPI: PM: Power Resource [V1PR]
[    0.447027] ACPI: PM: Power Resource [V2PR]
[    0.449009] ACPI: PM: Power Resource [PXTC]
[    0.449662] ACPI: PM: Power Resource [PXTC]
[    0.450338] ACPI: PM: Power Resource [WRST]
[    0.463869] ACPI: PM: Power Resource [PIN]
[    0.464277] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.464283] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.465382] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.467565] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[    0.468734] PCI host bridge to bus 0000:00
[    0.468736] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.468738] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.468740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.468741] pci_bus 0000:00: root bus resource [mem 0x6e800000-0xefffffff window]
[    0.468742] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.468743] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.468744] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.468766] pci 0000:00:00.0: [8086:9b54] type 00 class 0x060000
[    0.468827] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.468858] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.469307] pci 0000:00:02.0: [8086:9bf6] type 00 class 0x030000
[    0.469314] pci 0000:00:02.0: reg 0x10: [mem 0x604a000000-0x604affffff 64bit]
[    0.469318] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.469321] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.469334] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.469336] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.469459] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.469466] pci 0000:00:04.0: reg 0x10: [mem 0x604b110000-0x604b117fff 64bit]
[    0.469690] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.469696] pci 0000:00:08.0: reg 0x10: [mem 0x604b12a000-0x604b12afff 64bit]
[    0.469799] pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
[    0.469814] pci 0000:00:12.0: reg 0x10: [mem 0x604b129000-0x604b129fff 64bit]
[    0.469949] pci 0000:00:13.0: [8086:06fc] type 00 class 0x070000
[    0.469964] pci 0000:00:13.0: reg 0x10: [mem 0x604b122000-0x604b123fff 64bit]
[    0.470016] pci 0000:00:13.0: PME# supported from D0 D3hot
[    0.470292] pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
[    0.470305] pci 0000:00:14.0: reg 0x10: [mem 0x604b100000-0x604b10ffff 64bit]
[    0.470357] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.470642] pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
[    0.470657] pci 0000:00:14.2: reg 0x10: [mem 0x604b120000-0x604b121fff 64bit]
[    0.470666] pci 0000:00:14.2: reg 0x18: [mem 0x604b128000-0x604b128fff 64bit]
[    0.470786] pci 0000:00:14.3: [8086:06f0] type 00 class 0x028000
[    0.470801] pci 0000:00:14.3: reg 0x10: [mem 0x604b11c000-0x604b11ffff 64bit]
[    0.470892] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.471157] pci 0000:00:15.0: [8086:06e8] type 00 class 0x0c8000
[    0.471208] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.471600] pci 0000:00:15.1: [8086:06e9] type 00 class 0x0c8000
[    0.471651] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.472002] pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
[    0.472020] pci 0000:00:16.0: reg 0x10: [mem 0x604b125000-0x604b125fff 64bit]
[    0.472104] pci 0000:00:16.0: PME# supported from D3hot
[    0.472380] pci 0000:00:16.3: [8086:06e3] type 00 class 0x070002
[    0.472390] pci 0000:00:16.3: reg 0x10: [io  0x40a0-0x40a7]
[    0.472395] pci 0000:00:16.3: reg 0x14: [mem 0xb43a9000-0xb43a9fff]
[    0.472600] pci 0000:00:17.0: [8086:06d7] type 00 class 0x010400
[    0.472630] pci 0000:00:17.0: reg 0x10: [mem 0xb43a0000-0xb43a7fff]
[    0.472649] pci 0000:00:17.0: reg 0x14: [mem 0xb43a8000-0xb43a80ff]
[    0.472669] pci 0000:00:17.0: reg 0x18: [io  0x4090-0x4097]
[    0.472684] pci 0000:00:17.0: reg 0x1c: [io  0x4080-0x4083]
[    0.472702] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.472721] pci 0000:00:17.0: reg 0x24: [mem 0xb4300000-0xb437ffff]
[    0.472815] pci 0000:00:17.0: PME# supported from D3hot
[    0.473153] pci 0000:00:1c.0: [8086:06b8] type 01 class 0x060400
[    0.473228] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.473253] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[    0.473914] pci 0000:00:1c.5: [8086:06bd] type 01 class 0x060400
[    0.473987] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.474011] pci 0000:00:1c.5: PTM enabled (root), 4ns granularity
[    0.474643] pci 0000:00:1d.0: [8086:06b4] type 01 class 0x060400
[    0.474724] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.474752] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.475408] pci 0000:00:1f.0: [8086:068e] type 00 class 0x060100
[    0.475692] pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040380
[    0.475721] pci 0000:00:1f.3: reg 0x10: [mem 0x604b118000-0x604b11bfff 64bit]
[    0.475758] pci 0000:00:1f.3: reg 0x20: [mem 0x604b000000-0x604b0fffff 64bit]
[    0.475832] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.476397] pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
[    0.476420] pci 0000:00:1f.4: reg 0x10: [mem 0x604b124000-0x604b1240ff 64bit]
[    0.476447] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.476676] pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
[    0.476690] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.476793] pci 0000:00:1f.6: [8086:0d4c] type 00 class 0x020000
[    0.476819] pci 0000:00:1f.6: reg 0x10: [mem 0xb4380000-0xb439ffff]
[    0.476961] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.477066] pci 0000:01:00.0: [10de:1fb9] type 00 class 0x030000
[    0.477084] pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[    0.477099] pci 0000:01:00.0: reg 0x14: [mem 0x70000000-0x7fffffff 64bit pref]
[    0.477113] pci 0000:01:00.0: reg 0x1c: [mem 0x80000000-0x81ffffff 64bit pref]
[    0.477137] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.477145] pci 0000:01:00.0: reg 0x30: [mem 0xb4000000-0xb407ffff pref]
[    0.477222] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.477510] pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300
[    0.477528] pci 0000:01:00.1: reg 0x10: [mem 0xb4080000-0xb4083fff]
[    0.477718] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.477721] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.477722] pci 0000:00:01.0:   bridge window [mem 0xb3000000-0xb40fffff]
[    0.477724] pci 0000:00:01.0:   bridge window [mem 0x70000000-0x81ffffff 64bit pref]
[    0.477862] pci 0000:02:00.0: [8086:15ea] type 01 class 0x060400
[    0.477909] pci 0000:02:00.0: enabling Extended Tags
[    0.478002] pci 0000:02:00.0: supports D1 D2
[    0.478003] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.478092] pci 0000:02:00.0: PTM enabled, 4ns granularity
[    0.478223] pci 0000:00:1c.0: PCI bridge to [bus 02-6c]
[    0.478227] pci 0000:00:1c.0:   bridge window [mem 0x84000000-0xb20fffff]
[    0.478230] pci 0000:00:1c.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.478298] pci 0000:03:00.0: [8086:15ea] type 01 class 0x060400
[    0.478347] pci 0000:03:00.0: enabling Extended Tags
[    0.478442] pci 0000:03:00.0: supports D1 D2
[    0.478442] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.478610] pci 0000:03:01.0: [8086:15ea] type 01 class 0x060400
[    0.478659] pci 0000:03:01.0: enabling Extended Tags
[    0.478755] pci 0000:03:01.0: supports D1 D2
[    0.478756] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.478922] pci 0000:03:02.0: [8086:15ea] type 01 class 0x060400
[    0.478971] pci 0000:03:02.0: enabling Extended Tags
[    0.479062] pci 0000:03:02.0: supports D1 D2
[    0.479063] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.479247] pci 0000:03:04.0: [8086:15ea] type 01 class 0x060400
[    0.479297] pci 0000:03:04.0: enabling Extended Tags
[    0.479393] pci 0000:03:04.0: supports D1 D2
[    0.479393] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.479568] pci 0000:02:00.0: PCI bridge to [bus 03-6c]
[    0.479575] pci 0000:02:00.0:   bridge window [mem 0x84000000-0xb20fffff]
[    0.479581] pci 0000:02:00.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.479641] pci 0000:04:00.0: [8086:15eb] type 00 class 0x088000
[    0.479660] pci 0000:04:00.0: reg 0x10: [mem 0xb2000000-0xb203ffff]
[    0.479671] pci 0000:04:00.0: reg 0x14: [mem 0xb2040000-0xb2040fff]
[    0.479727] pci 0000:04:00.0: enabling Extended Tags
[    0.479827] pci 0000:04:00.0: supports D1 D2
[    0.479828] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.479997] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.480005] pci 0000:03:00.0:   bridge window [mem 0xb2000000-0xb20fffff]
[    0.480046] pci 0000:03:01.0: PCI bridge to [bus 05-37]
[    0.480054] pci 0000:03:01.0:   bridge window [mem 0x84000000-0x9befffff]
[    0.480059] pci 0000:03:01.0:   bridge window [mem 0x6000000000-0x601fffffff 64bit pref]
[    0.480135] pci 0000:38:00.0: [8086:15ec] type 00 class 0x0c0330
[    0.480155] pci 0000:38:00.0: reg 0x10: [mem 0x9bf00000-0x9bf0ffff]
[    0.480228] pci 0000:38:00.0: enabling Extended Tags
[    0.480343] pci 0000:38:00.0: supports D1 D2
[    0.480344] pci 0000:38:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.480448] pci 0000:38:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.480583] pci 0000:03:02.0: PCI bridge to [bus 38]
[    0.480591] pci 0000:03:02.0:   bridge window [mem 0x9bf00000-0x9bffffff]
[    0.480631] pci 0000:03:04.0: PCI bridge to [bus 39-6c]
[    0.480639] pci 0000:03:04.0:   bridge window [mem 0x9c000000-0xb1ffffff]
[    0.480644] pci 0000:03:04.0:   bridge window [mem 0x6020000000-0x6049ffffff 64bit pref]
[    0.480788] pci 0000:6d:00.0: [10ec:5260] type 00 class 0xff0000
[    0.480802] pci 0000:6d:00.0: reg 0x10: [mem 0xb4200000-0xb4200fff]
[    0.480912] pci 0000:6d:00.0: supports D1 D2
[    0.480912] pci 0000:6d:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.481094] pci 0000:00:1c.5: PCI bridge to [bus 6d]
[    0.481097] pci 0000:00:1c.5:   bridge window [mem 0xb4200000-0xb42fffff]
[    0.481293] pci 0000:6e:00.0: [1e0f:0001] type 00 class 0x010802
[    0.481313] pci 0000:6e:00.0: reg 0x10: [mem 0xb4100000-0xb4103fff 64bit]
[    0.481423] pci 0000:6e:00.0: PME# supported from D0 D3hot
[    0.481478] pci 0000:6e:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1d.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.481579] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[    0.481582] pci 0000:00:1d.0:   bridge window [mem 0xb4100000-0xb41fffff]
[    0.491969] Low-power S0 idle used by default for system suspend
[    0.492051] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.492151] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.492233] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.492313] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.492394] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.492474] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.492555] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.492636] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.496288] ACPI: EC: interrupt unblocked
[    0.496289] ACPI: EC: event unblocked
[    0.496296] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.496297] ACPI: EC: GPE=0x6e
[    0.496298] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[    0.496299] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[    0.496359] iommu: Default domain type: Translated 
[    0.496359] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.496359] SCSI subsystem initialized
[    0.496359] libata version 3.00 loaded.
[    0.496359] ACPI: bus type USB registered
[    0.496359] usbcore: registered new interface driver usbfs
[    0.496359] usbcore: registered new interface driver hub
[    0.496359] usbcore: registered new device driver usb
[    0.496359] pps_core: LinuxPPS API ver. 1 registered
[    0.496359] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.496359] PTP clock support registered
[    0.496359] EDAC MC: Ver: 3.0.0
[    0.496359] Registered efivars operations
[    0.496359] NetLabel: Initializing
[    0.496359] NetLabel:  domain hash size = 128
[    0.496359] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.496359] NetLabel:  unlabeled traffic allowed by default
[    0.496359] mctp: management component transport protocol core
[    0.496359] NET: Registered PF_MCTP protocol family
[    0.496359] PCI: Using ACPI for IRQ routing
[    0.501064] PCI: pci_cache_line_size set to 64 bytes
[    0.501064] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.501064] e820: reserve RAM buffer [mem 0x3f82c018-0x3fffffff]
[    0.501064] e820: reserve RAM buffer [mem 0x3f83d018-0x3fffffff]
[    0.501064] e820: reserve RAM buffer [mem 0x40fdf000-0x43ffffff]
[    0.501064] e820: reserve RAM buffer [mem 0x4e833000-0x4fffffff]
[    0.501064] e820: reserve RAM buffer [mem 0x5b97f000-0x5bffffff]
[    0.501064] e820: reserve RAM buffer [mem 0x66e00000-0x67ffffff]
[    0.501064] e820: reserve RAM buffer [mem 0x88d800000-0x88fffffff]
[    0.504412] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.504412] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.504412] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.504412] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.504412] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.504412] vgaarb: loaded
[    0.505541] clocksource: Switched to clocksource tsc-early
[    0.510314] VFS: Disk quotas dquot_6.6.0
[    0.510326] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.510380] pnp: PnP ACPI init
[    0.510584] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.510587] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.510713] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.511032] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.511034] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.511037] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.511038] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.511039] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.511041] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.511042] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.511305] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.511937] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.511939] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.511940] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.511942] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.511943] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.511944] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.511945] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.511947] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.512119] system 00:08: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.516711] pnp: PnP ACPI: found 9 devices
[    0.521922] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.521961] NET: Registered PF_INET protocol family
[    0.522074] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.524352] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.524381] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.524484] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.524735] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.524924] TCP: Hash tables configured (established 262144 bind 65536)
[    0.525002] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.525076] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.525135] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.525193] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.525197] NET: Registered PF_XDP protocol family
[    0.525203] pci 0000:03:01.0: bridge window [io  0x1000-0x0fff] to [bus 05-37] add_size 1000
[    0.525206] pci 0000:03:04.0: bridge window [io  0x1000-0x0fff] to [bus 39-6c] add_size 1000
[    0.525208] pci 0000:02:00.0: bridge window [io  0x1000-0x0fff] to [bus 03-6c] add_size 2000
[    0.525209] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02-6c] add_size 3000
[    0.525217] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[    0.525263] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[    0.525306] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x7fff]
[    0.525308] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.525310] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.525311] pci 0000:00:01.0:   bridge window [mem 0xb3000000-0xb40fffff]
[    0.525313] pci 0000:00:01.0:   bridge window [mem 0x70000000-0x81ffffff 64bit pref]
[    0.525317] pci 0000:02:00.0: BAR 13: assigned [io  0x5000-0x6fff]
[    0.525318] pci 0000:03:01.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.525319] pci 0000:03:04.0: BAR 13: assigned [io  0x6000-0x6fff]
[    0.525321] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.525328] pci 0000:03:00.0:   bridge window [mem 0xb2000000-0xb20fffff]
[    0.525336] pci 0000:03:01.0: PCI bridge to [bus 05-37]
[    0.525338] pci 0000:03:01.0:   bridge window [io  0x5000-0x5fff]
[    0.525342] pci 0000:03:01.0:   bridge window [mem 0x84000000-0x9befffff]
[    0.525345] pci 0000:03:01.0:   bridge window [mem 0x6000000000-0x601fffffff 64bit pref]
[    0.525350] pci 0000:03:02.0: PCI bridge to [bus 38]
[    0.525354] pci 0000:03:02.0:   bridge window [mem 0x9bf00000-0x9bffffff]
[    0.525362] pci 0000:03:04.0: PCI bridge to [bus 39-6c]
[    0.525363] pci 0000:03:04.0:   bridge window [io  0x6000-0x6fff]
[    0.525368] pci 0000:03:04.0:   bridge window [mem 0x9c000000-0xb1ffffff]
[    0.525371] pci 0000:03:04.0:   bridge window [mem 0x6020000000-0x6049ffffff 64bit pref]
[    0.525376] pci 0000:02:00.0: PCI bridge to [bus 03-6c]
[    0.525378] pci 0000:02:00.0:   bridge window [io  0x5000-0x6fff]
[    0.525382] pci 0000:02:00.0:   bridge window [mem 0x84000000-0xb20fffff]
[    0.525385] pci 0000:02:00.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.525390] pci 0000:00:1c.0: PCI bridge to [bus 02-6c]
[    0.525392] pci 0000:00:1c.0:   bridge window [io  0x5000-0x7fff]
[    0.525394] pci 0000:00:1c.0:   bridge window [mem 0x84000000-0xb20fffff]
[    0.525396] pci 0000:00:1c.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.525400] pci 0000:00:1c.5: PCI bridge to [bus 6d]
[    0.525403] pci 0000:00:1c.5:   bridge window [mem 0xb4200000-0xb42fffff]
[    0.525408] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[    0.525410] pci 0000:00:1d.0:   bridge window [mem 0xb4100000-0xb41fffff]
[    0.525415] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.525417] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.525418] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.525419] pci_bus 0000:00: resource 7 [mem 0x6e800000-0xefffffff window]
[    0.525420] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.525421] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.525422] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.525422] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb40fffff]
[    0.525423] pci_bus 0000:01: resource 2 [mem 0x70000000-0x81ffffff 64bit pref]
[    0.525424] pci_bus 0000:02: resource 0 [io  0x5000-0x7fff]
[    0.525425] pci_bus 0000:02: resource 1 [mem 0x84000000-0xb20fffff]
[    0.525426] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.525427] pci_bus 0000:03: resource 0 [io  0x5000-0x6fff]
[    0.525428] pci_bus 0000:03: resource 1 [mem 0x84000000-0xb20fffff]
[    0.525429] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.525430] pci_bus 0000:04: resource 1 [mem 0xb2000000-0xb20fffff]
[    0.525431] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
[    0.525432] pci_bus 0000:05: resource 1 [mem 0x84000000-0x9befffff]
[    0.525433] pci_bus 0000:05: resource 2 [mem 0x6000000000-0x601fffffff 64bit pref]
[    0.525434] pci_bus 0000:38: resource 1 [mem 0x9bf00000-0x9bffffff]
[    0.525435] pci_bus 0000:39: resource 0 [io  0x6000-0x6fff]
[    0.525436] pci_bus 0000:39: resource 1 [mem 0x9c000000-0xb1ffffff]
[    0.525437] pci_bus 0000:39: resource 2 [mem 0x6020000000-0x6049ffffff 64bit pref]
[    0.525438] pci_bus 0000:6d: resource 1 [mem 0xb4200000-0xb42fffff]
[    0.525439] pci_bus 0000:6e: resource 1 [mem 0xb4100000-0xb41fffff]
[    0.525903] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.525926] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.525935] pci 0000:02:00.0: CLS mismatch (64 != 128), using 64 bytes
[    0.526025] pci 0000:02:00.0: enabling device (0002 -> 0003)
[    0.526218] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.526219] software IO TLB: mapped [mem 0x0000000052c2f000-0x0000000056c2f000] (64MB)
[    0.526237] Trying to unpack rootfs image as initramfs...
[    0.527066] Initialise system trusted keyrings
[    0.527072] Key type blacklist registered
[    0.527100] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.527957] zbud: loaded
[    0.528096] integrity: Platform Keyring initialized
[    0.528098] integrity: Machine keyring initialized
[    0.534973] Key type asymmetric registered
[    0.534974] Asymmetric key parser 'x509' registered
[    0.590169] Freeing initrd memory: 22616K
[    0.592188] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.592213] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.592237] io scheduler mq-deadline registered
[    0.592238] io scheduler kyber registered
[    0.592267] io scheduler bfq registered
[    0.594781] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[    0.594858] pcieport 0000:00:1c.0: PME: Signaling with IRQ 123
[    0.594875] pcieport 0000:00:1c.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.595081] pcieport 0000:00:1c.5: PME: Signaling with IRQ 124
[    0.595242] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125
[    0.595548] pcieport 0000:03:01.0: enabling device (0002 -> 0003)
[    0.595639] pcieport 0000:03:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.595897] pcieport 0000:03:04.0: enabling device (0002 -> 0003)
[    0.595990] pcieport 0000:03:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.596140] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.596367] Monitor-Mwait will be used to enter C-1 state
[    0.596375] Monitor-Mwait will be used to enter C-2 state
[    0.596379] Monitor-Mwait will be used to enter C-3 state
[    0.596382] ACPI: \_SB_.PR00: Found 3 idle states
[    0.597980] ACPI: AC: AC Adapter [AC] (off-line)
[    0.598051] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.598105] ACPI: button: Lid Switch [LID0]
[    0.598129] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.598193] ACPI: button: Power Button [PBTN]
[    0.598210] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.598220] ACPI: button: Sleep Button [SBTN]
[    0.600795] thermal LNXTHERM:00: registered as thermal_zone0
[    0.600797] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.600841] ERST: Error Record Serialization Table (ERST) support is initialized.
[    0.600843] pstore: Registered erst as persistent store backend
[    0.600961] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.602255] serial 0000:00:13.0: enabling device (0000 -> 0002)
[    0.602450] serial 0000:00:16.3: enabling device (0000 -> 0003)
[    0.603261] 0000:00:16.3: ttyS4 at I/O 0x40a0 (irq = 19, base_baud = 115200) is a 16550A
[    0.603804] hpet_acpi_add: no address or irqs in _CRS
[    0.603828] Non-volatile memory driver v1.3
[    0.603829] Linux agpgart interface v0.103
[    0.605516] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x0, rev-id 78)
[    0.615479] tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
[    0.618535] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.618586] ACPI: bus type drm_connector registered
[    0.619653] ahci 0000:00:17.0: version 3.0
[    0.619885] ahci 0000:00:17.0: Found 1 remapped NVMe devices.
[    0.619887] ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them.
[    0.620026] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 16 ports 3 Gbps 0x0 impl RAID mode
[    0.620028] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
[    0.620732] scsi host0: ahci
[    0.621236] scsi host1: ahci
[    0.621548] scsi host2: ahci
[    0.621770] scsi host3: ahci
[    0.621860] scsi host4: ahci
[    0.621917] scsi host5: ahci
[    0.621967] scsi host6: ahci
[    0.622022] scsi host7: ahci
[    0.622077] scsi host8: ahci
[    0.622127] scsi host9: ahci
[    0.622175] scsi host10: ahci
[    0.622245] scsi host11: ahci
[    0.622295] scsi host12: ahci
[    0.622344] scsi host13: ahci
[    0.622399] scsi host14: ahci
[    0.622450] scsi host15: ahci
[    0.622473] ata1: DUMMY
[    0.622474] ata2: DUMMY
[    0.622474] ata3: DUMMY
[    0.622475] ata4: DUMMY
[    0.622475] ata5: DUMMY
[    0.622476] ata6: DUMMY
[    0.622476] ata7: DUMMY
[    0.622477] ata8: DUMMY
[    0.622477] ata9: DUMMY
[    0.622478] ata10: DUMMY
[    0.622479] ata11: DUMMY
[    0.622479] ata12: DUMMY
[    0.622480] ata13: DUMMY
[    0.622480] ata14: DUMMY
[    0.622481] ata15: DUMMY
[    0.622481] ata16: DUMMY
[    0.622571] usbcore: registered new interface driver usbserial_generic
[    0.622574] usbserial: USB Serial support registered for generic
[    0.622628] rtc_cmos 00:01: RTC can wake from S4
[    0.623900] rtc_cmos 00:01: registered as rtc0
[    0.624143] rtc_cmos 00:01: setting system clock to 2024-01-07T12:21:46 UTC (1704630106)
[    0.624179] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.624631] intel_pstate: Intel P-state driver initializing
[    0.625224] intel_pstate: HWP enabled
[    0.625447] ledtrig-cpu: registered to indicate activity on CPUs
[    0.625699] efifb: probing for efifb
[    0.625715] efifb: showing boot graphics
[    0.628625] efifb: framebuffer at 0x4000000000, using 32400k, total 32400k
[    0.628627] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[    0.628629] efifb: scrolling: redraw
[    0.628629] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.628656] fbcon: Deferring console take-over
[    0.628657] fb0: EFI VGA frame buffer device
[    0.628680] hid: raw HID events driver (C) Jiri Kosina
[    0.628789] intel_pmc_core INT33A1:00:  initialized
[    0.628871] drop_monitor: Initializing network drop monitor service
[    0.637761] Initializing XFRM netlink socket
[    0.637826] NET: Registered PF_INET6 protocol family
[    0.640613] Segment Routing with IPv6
[    0.640614] RPL Segment Routing with IPv6
[    0.640619] In-situ OAM (IOAM) with IPv6
[    0.640632] NET: Registered PF_PACKET protocol family
[    0.641718] microcode: sig=0xa0652, pf=0x20, revision=0xf8
[    0.641977] microcode: Microcode Update Driver: v2.2.
[    0.641982] IPI shorthand broadcast: enabled
[    0.642002] sched_clock: Marking stable (635071061, 6604509)->(676305477, -34629907)
[    0.642281] registered taskstats version 1
[    0.642431] Loading compiled-in X.509 certificates
[    0.643902] ACPI: battery: Slot [BAT0] (battery present)
[    0.645004] Loaded X.509 cert 'Build time autogenerated kernel key: 27e8cecb31abef80ca7ab86204328a57a4f6598d'
[    0.645304] zswap: loaded using pool lz4/z3fold
[    0.645443] Key type .fscrypt registered
[    0.645444] Key type fscrypt-provisioning registered
[    0.645570] pstore: Using crash dump compression: zstd
[    0.645780] integrity: Loading X.509 certificate: UEFI:db
[    0.645797] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487'
[    0.645798] integrity: Loading X.509 certificate: UEFI:db
[    0.645809] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd'
[    0.645809] integrity: Loading X.509 certificate: UEFI:db
[    0.645822] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.645823] integrity: Loading X.509 certificate: UEFI:db
[    0.645837] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.647247] PM:   Magic number: 8:588:379
[    0.647399] RAS: Correctable Errors collector initialized.
[    0.648109] Freeing unused decrypted memory: 2036K
[    0.648319] Freeing unused kernel image (initmem) memory: 2152K
[    0.686792] Write protecting the kernel read-only data: 30720k
[    0.687393] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.687547] Freeing unused kernel image (rodata/data gap) memory: 800K
[    0.698690] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.698695] rodata_test: all tests were successful
[    0.698698] Run /init as init process
[    0.698700]   with arguments:
[    0.698701]     /init
[    0.698701]   with environment:
[    0.698702]     HOME=/
[    0.698703]     TERM=linux
[    0.698703]     BOOT_IMAGE=/boot/vmlinuz-linux-lts
[    0.840159] wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found
[    0.846882] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.847333] i8042: Warning: Keylock active
[    0.849690] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.849700] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.859267] rtsx_pci 0000:6d:00.0: enabling device (0000 -> 0002)
[    0.861702] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.861708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.862789] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.863032] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.863036] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.863039] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.863092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.863095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.863097] usb usb1: Product: xHCI Host Controller
[    0.863099] usb usb1: Manufacturer: Linux 6.1.61-1-lts xhci-hcd
[    0.863101] usb usb1: SerialNumber: 0000:00:14.0
[    0.863253] hub 1-0:1.0: USB hub found
[    0.863275] hub 1-0:1.0: 16 ports detected
[    0.866819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.866823] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.866825] usb usb2: Product: xHCI Host Controller
[    0.866827] usb usb2: Manufacturer: Linux 6.1.61-1-lts xhci-hcd
[    0.866829] usb usb2: SerialNumber: 0000:00:14.0
[    0.866921] hub 2-0:1.0: USB hub found
[    0.866938] hub 2-0:1.0: 10 ports detected
[    0.869069] usb: port power management may be unreliable
[    0.870679] xhci_hcd 0000:38:00.0: xHCI Host Controller
[    0.870684] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 3
[    0.871819] xhci_hcd 0000:38:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    0.872085] xhci_hcd 0000:38:00.0: xHCI Host Controller
[    0.872089] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 4
[    0.872091] xhci_hcd 0000:38:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.872128] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.872130] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.872132] usb usb3: Product: xHCI Host Controller
[    0.872134] usb usb3: Manufacturer: Linux 6.1.61-1-lts xhci-hcd
[    0.872136] usb usb3: SerialNumber: 0000:38:00.0
[    0.872230] hub 3-0:1.0: USB hub found
[    0.872242] hub 3-0:1.0: 2 ports detected
[    0.872807] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.872809] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.872811] usb usb4: Product: xHCI Host Controller
[    0.872812] usb usb4: Manufacturer: Linux 6.1.61-1-lts xhci-hcd
[    0.872813] usb usb4: SerialNumber: 0000:38:00.0
[    0.872871] hub 4-0:1.0: USB hub found
[    0.872882] hub 4-0:1.0: 2 ports detected
[    0.873990] nvme nvme0: pci function 0000:6e:00.0
[    0.884554] nvme nvme0: allocated 61 MiB host memory buffer.
[    1.038275] nvme nvme0: 12/0/0 default/read/poll queues
[    1.041236]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    1.053204] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.123281] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.247894] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.249008] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.249387] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.265341] usb 1-1: New USB device found, idVendor=25a7, idProduct=fa23, bcdDevice= 2.41
[    1.265344] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.265345] usb 1-1: Product: 2.4G Receiver
[    1.265346] usb 1-1: Manufacturer: Compx
[    1.271768] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:25A7:FA23.0001/input/input5
[    1.291938] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.293219] i915 0000:00:02.0: [drm] [ENCODER:118:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.294813] i915 0000:00:02.0: [drm] [ENCODER:128:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.327229] hid-generic 0003:25A7:FA23.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-1/input0
[    1.330768] input: Compx 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input6
[    1.330995] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input7
[    1.331250] input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input8
[    1.386851] usb 1-11: new high-speed USB device number 3 using xhci_hcd
[    1.387052] input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input9
[    1.387383] hid-generic 0003:25A7:FA23.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-1/input1
[    1.387456] usbcore: registered new interface driver usbhid
[    1.387460] usbhid: USB HID core driver
[    1.550058] tsc: Refined TSC clocksource calibration: 2808.007 MHz
[    1.550076] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879ccbd1c9, max_idle_ns: 440795272325 ns
[    1.550168] clocksource: Switched to clocksource tsc
[    1.600423] usb 1-11: New USB device found, idVendor=1bcf, idProduct=28c4, bcdDevice=86.16
[    1.600435] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.600440] usb 1-11: Product: Integrated_Webcam_HD
[    1.600444] usb 1-11: Manufacturer: CN00XMGG8LG0011SC2B5A03
[    1.600447] usb 1-11: SerialNumber: 01.00.00
[    1.740059] usb 1-14: new full-speed USB device number 4 using xhci_hcd
[    1.882627] usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    1.882640] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.948975] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[    2.949008] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    2.952390] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.952981] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    2.953037] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.953104] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    2.953123] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input12
[    3.335654] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[    3.335657] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[    3.608382] fbcon: i915drmfb (fb0) is primary device
[    3.608385] fbcon: Deferring console take-over
[    3.608387] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.675715] fbcon: Taking over console
[    4.005651] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[    4.005653] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[    4.305041] Console: switching to colour frame buffer device 240x67
[    4.704100] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[    4.704102] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[    5.093484] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Quota mode: none.
[    5.165039] systemd[1]: systemd 254.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    5.165043] systemd[1]: Detected architecture x86-64.
[    5.165828] systemd[1]: Hostname set to <ArchLinuxKDE>.
[    5.660159] systemd[1]: bpf-lsm: LSM BPF program attached
[    5.859748] systemd[1]: Queued start job for default target Graphical Interface.
[    5.888952] systemd[1]: Created slice Slice /system/getty.
[    5.889666] systemd[1]: Created slice Slice /system/modprobe.
[    5.890412] systemd[1]: Created slice Slice /system/systemd-fsck.
[    5.890908] systemd[1]: Created slice User and Session Slice.
[    5.891055] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.891412] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.891512] systemd[1]: Reached target Login Prompts.
[    5.891542] systemd[1]: Reached target Local Integrity Protected Volumes.
[    5.891598] systemd[1]: Reached target Remote File Systems.
[    5.891623] systemd[1]: Reached target Slice Units.
[    5.891691] systemd[1]: Reached target Local Verity Protected Volumes.
[    5.891840] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.892446] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.894984] systemd[1]: Listening on Process Core Dump Socket.
[    5.895237] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.895468] systemd[1]: Listening on Journal Socket.
[    5.895772] systemd[1]: Listening on udev Control Socket.
[    5.895970] systemd[1]: Listening on udev Kernel Socket.
[    5.897827] systemd[1]: Mounting Huge Pages File System...
[    5.899490] systemd[1]: Mounting POSIX Message Queue File System...
[    5.901260] systemd[1]: Mounting Kernel Debug File System...
[    5.902989] systemd[1]: Mounting Kernel Trace File System...
[    5.904994] systemd[1]: Starting Create List of Static Device Nodes...
[    5.906742] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.908609] systemd[1]: Starting Load Kernel Module configfs...
[    5.910475] systemd[1]: Starting Load Kernel Module dm_mod...
[    5.912329] systemd[1]: Starting Load Kernel Module drm...
[    5.914137] systemd[1]: Starting Load Kernel Module fuse...
[    5.915534] systemd[1]: Starting Load Kernel Module loop...
[    5.915689] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    5.917996] systemd[1]: Starting Journal Service...
[    5.919640] systemd[1]: Starting Load Kernel Modules...
[    5.919686] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    5.920750] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.922011] systemd[1]: Starting Coldplug All udev Devices...
[    5.923287] systemd[1]: Starting Virtual Console Setup...
[    5.924991] systemd[1]: Mounted Huge Pages File System.
[    5.925102] systemd[1]: Mounted POSIX Message Queue File System.
[    5.925183] systemd[1]: Mounted Kernel Debug File System.
[    5.925261] systemd[1]: Mounted Kernel Trace File System.
[    5.926155] loop: module loaded
[    5.928961] EXT4-fs (nvme0n1p6): re-mounted. Quota mode: none.
[    5.931355] device-mapper: uevent: version 1.0.3
[    5.931430] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    5.932836] systemd-journald[351]: Collecting audit messages is disabled.
[    5.933032] fuse: init (API version 7.37)
[    5.935964] i2c_dev: i2c /dev entries driver
[    5.976830] systemd[1]: Finished Create List of Static Device Nodes.
[    5.977298] systemd[1]: Started Journal Service.
[    6.216568] systemd-journald[351]: Received client request to flush runtime journal.
[    6.232088] systemd-journald[351]: /var/log/journal/501d2649efeb446580db87d9ee1a82a9/system.journal: Journal file uses a different sequence number ID, rotating.
[    6.232091] systemd-journald[351]: Rotating system journal.
[    6.320801] nvidia: loading out-of-tree module taints kernel.
[    6.320808] nvidia: module license 'NVIDIA' taints kernel.
[    6.320809] Disabling lock debugging due to kernel taint
[    6.332539] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    6.537391] Adding 8766460k swap on /dev/nvme0n1p8.  Priority:-2 extents:1 across:8766460k SSFS
[    6.563287] mousedev: PS/2 mouse device common for all mice
[    6.565929] nvidia-nvlink: Nvlink Core is being initialized, major device number 234

[    6.568587] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[    6.568684] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    6.570947] Consider using thermal netlink events interface
[    6.575795] input: Intel HID events as /devices/platform/INT33D5:00/input/input13
[    6.577100] intel-hid INT33D5:00: platform supports 5 button array
[    6.580484] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input14
[    6.603638] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    6.614156] mc: Linux media interface: v0.10
[    6.614588] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  545.29.02  Thu Oct 26 21:21:38 UTC 2023
[    6.685291] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Quota mode: none.
[    6.701567] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[    6.705497] e1000e: Intel(R) PRO/1000 Network Driver
[    6.705500] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    6.705774] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    6.725177] ACPI: bus type thunderbolt registered
[    6.733348] videodev: Linux video capture interface: v2.00
[    6.895953] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    6.963502] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 38:14:28:04:00:48
[    6.963504] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    6.963639] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    7.039170] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    7.039434] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    7.060335] Bluetooth: Core ver 2.22
[    7.060371] NET: Registered PF_BLUETOOTH protocol family
[    7.060372] Bluetooth: HCI device and connection manager initialized
[    7.060375] Bluetooth: HCI socket layer initialized
[    7.060377] Bluetooth: L2CAP socket layer initialized
[    7.060397] Bluetooth: SCO socket layer initialized
[    7.060687] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.060853] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    7.060874] input: PC Speaker as /devices/platform/pcspkr/input/input15
[    7.060876] spi-nor spi0.0: unrecognized JEDEC id bytes: 20 60 19 20 60 19
[    7.061577] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    7.061643] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    7.061936] nvidia-uvm: Loaded the UVM driver, major device number 508.
[    7.062285] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.062955] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.062959] cfg80211: failed to load regulatory.db
[    7.092096] intel_rapl_common: Found RAPL domain package
[    7.092099] intel_rapl_common: Found RAPL domain core
[    7.092100] intel_rapl_common: Found RAPL domain uncore
[    7.092101] intel_rapl_common: Found RAPL domain dram
[    7.092102] intel_rapl_common: Found RAPL domain psys
[    7.104887] e1000e 0000:00:1f.6 eno2: renamed from eth0
[    7.116059] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  545.29.02  Thu Oct 26 20:52:21 UTC 2023
[    7.183314] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    7.183619] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    7.218991] i2c i2c-8: 2/4 memory slots populated (from DMI)
[    7.219944] i2c i2c-8: Successfully instantiated SPD at 0x51
[    7.221013] i2c i2c-8: Successfully instantiated SPD at 0x53
[    7.228570] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    7.243453] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    7.243457] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    7.243463] iTCO_vendor_support: vendor-support=0
[    7.246381] input: Dell WMI hotkeys as /devices/platform/PNP0C14:05/wmi_bus/wmi_bus-PNP0C14:05/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input17
[    7.260256] Intel(R) Wireless WiFi driver for Linux
[    7.260315] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    7.261946] ee1004 8-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.262068] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    7.262656] ee1004 8-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.262678] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    7.262681] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.262683] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.262684] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    7.262685] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    7.262686] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    7.270236] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    7.270827] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.270995] cryptd: max_cpu_qlen set to 1000
[    7.273863] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    7.273877] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    7.274128] iwlwifi 0000:00:14.3: loaded firmware version 72.daa05125.0 QuZ-a0-hr-b0-72.ucode op_mode iwlmvm
[    7.287114] AVX2 version of gcm_enc/dec engaged.
[    7.287154] AES CTR mode by8 optimization enabled
[    7.290940] usb 1-11: Found UVC 1.50 device Integrated_Webcam_HD (1bcf:28c4)
[    7.311491] intel_rapl_common: Found RAPL domain package
[    7.311495] intel_rapl_common: Found RAPL domain dram
[    7.318309] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    7.322875] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    7.328307] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.328834] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    7.330919] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.330926] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.372998] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input18
[    7.378995] usb 1-11: Found UVC 1.50 device Integrated_Webcam_HD (1bcf:28c4)
[    7.382722] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[    7.382774] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[    7.382819] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[    7.382866] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[    7.392022] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC289: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.392029] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.392032] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.392034] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.392036] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.392038] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    7.392040] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1b
[    7.392042] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    7.400317] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/input/input23
[    7.400374] usbcore: registered new interface driver uvcvideo
[    7.455547] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[    7.455588] thermal thermal_zone9: failed to read out thermal zone (-61)
[    7.521063] usbcore: registered new interface driver btusb
[    7.521658] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[    7.522588] Bluetooth: hci0: Device revision is 2
[    7.522590] Bluetooth: hci0: Secure boot is enabled
[    7.522591] Bluetooth: hci0: OTP lock is enabled
[    7.522591] Bluetooth: hci0: API lock is enabled
[    7.522592] Bluetooth: hci0: Debug lock is disabled
[    7.522593] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    7.525225] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[    7.525256] Bluetooth: hci0: Boot Address: 0x24800
[    7.525257] Bluetooth: hci0: Firmware Version: 249-27.23
[    7.580499] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    7.600875] input: DELL09C4:00 0488:120A Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL09C4:00/0018:0488:120A.0003/input/input24
[    7.600931] input: DELL09C4:00 0488:120A Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL09C4:00/0018:0488:120A.0003/input/input25
[    7.600972] input: DELL09C4:00 0488:120A as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL09C4:00/0018:0488:120A.0003/input/input26
[    7.601005] hid-generic 0018:0488:120A.0003: input,hidraw2: I2C HID v1.00 Mouse [DELL09C4:00 0488:120A] on i2c-DELL09C4:00
[    7.601479] dell_laptop: Using i8042 filter function for receiving events
[    7.621191] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2
[    7.627847] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
[    7.633408] hid-generic 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
[    7.647694] iwlwifi 0000:00:14.3: base HW address: f8:5e:a0:fc:4e:6e
[    7.668337] intel_tcc_cooling: Programmable TCC Offset detected
[    7.774709] 8021q: 802.1Q VLAN Support v1.8
[    7.778248] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.778250] Bluetooth: BNEP filters: protocol multicast
[    7.778253] Bluetooth: BNEP socket layer initialized
[    7.811317] input: DELL09C4:00 0488:120A Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL09C4:00/0018:0488:120A.0003/input/input27
[    7.811377] input: DELL09C4:00 0488:120A Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL09C4:00/0018:0488:120A.0003/input/input28
[    7.811422] input: DELL09C4:00 0488:120A UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL09C4:00/0018:0488:120A.0003/input/input29
[    7.811457] hid-multitouch 0018:0488:120A.0003: input,hidraw2: I2C HID v1.00 Mouse [DELL09C4:00 0488:120A] on i2c-DELL09C4:00
[    7.857537] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input16
[    8.142234] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    8.282541] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[    8.282579] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[    8.282607] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[    8.282636] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[    8.930269] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61)
[    9.248135] Bluetooth: hci0: Waiting for firmware download to complete
[    9.248566] Bluetooth: hci0: Firmware loaded in 1682947 usecs
[    9.248587] Bluetooth: hci0: Waiting for device to boot
[    9.263603] Bluetooth: hci0: Device booted in 14672 usecs
[    9.263638] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    9.264896] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[    9.266618] Bluetooth: hci0: Applying Intel DDC parameters completed
[    9.267644] Bluetooth: hci0: Firmware revision 0.4 build 249 week 27 2023
[    9.332674] Bluetooth: MGMT ver 1.22
[    9.337288] NET: Registered PF_ALG protocol family
[    9.437728] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
[    9.437751] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
[    9.437767] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
[    9.437781] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
[    9.437796] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
[   10.080110] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[   10.080113] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[   10.743721] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[   10.743723] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[   35.137726] systemd-journald[351]: /var/log/journal/501d2649efeb446580db87d9ee1a82a9/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   37.108904] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[   37.108907] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[   37.750800] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[   37.750804] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[   40.441072] Bluetooth: RFCOMM TTY layer initialized
[   40.441080] Bluetooth: RFCOMM socket layer initialized
[   40.441084] Bluetooth: RFCOMM ver 1.11
[   41.305850] wlo1: authenticate with e4:9e:12:fe:bb:f4
[   41.310933] wlo1: send auth to e4:9e:12:fe:bb:f4 (try 1/3)
[   41.340660] wlo1: authenticated
[   41.343300] wlo1: associate with e4:9e:12:fe:bb:f4 (try 1/3)
[   41.345274] wlo1: RX AssocResp from e4:9e:12:fe:bb:f4 (capab=0x1111 status=0 aid=2)
[   41.350103] wlo1: associated
[   41.444172] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:9e:12:fe:bb:f4
[   41.470863] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready

loqs · 2024-01-07 12:28:48

Is the device listed in the output of `lspci`?

MeuhMeuh62 · 2024-01-07 12:43:17

I see that :

[tom@ArchLinuxKDE ~]$ lspci
00:00.0 Host bridge: Intel Corporation 10th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Coffee Lake-S GT2 [UHD Graphics P630] (rev 05)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller
00:13.0 Serial controller: Intel Corporation Device 06fc
00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller
00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi
00:15.0 Serial bus controller: Intel Corporation Comet Lake PCH Serial IO I2C Controller #0
00:15.1 Serial bus controller: Intel Corporation Comet Lake PCH Serial IO I2C Controller #1
00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller
00:16.3 Serial controller: Intel Corporation Comet Lake Keyboard and Text (KT) Redirection
00:17.0 RAID bus controller: Intel Corporation Comet Lake PCH-H RAID
00:1c.0 PCI bridge: Intel Corporation Device 06b8 (rev f0)
00:1c.5 PCI bridge: Intel Corporation Comet Lake PCIe Port #6 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Device 06b4 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device 068e
00:1f.3 Audio device: Intel Corporation Comet Lake PCH cAVS
00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller
00:1f.5 Serial bus controller: Intel Corporation Comet Lake PCH SPI Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (11) I219-LM
01:00.0 VGA compatible controller: NVIDIA Corporation TU117GLM [Quadro T1000 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10fa (rev a1)
02:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
03:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
03:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
03:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
03:04.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
04:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018] (rev 06)
38:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018] (rev 06)
6d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5260 PCI Express Card Reader (rev 01)
6e:00.0 Non-Volatile memory controller: KIOXIA Corporation NVMe SSD Controller BG4 (DRAM-less)

I think it's this : 6e:00.0 Non-Volatile memory controller: KIOXIA Corporation NVMe SSD Controller BG4 (DRAM-less)
But there is once.

loqs · 2024-01-07 12:50:27

[    0.619885] ahci 0000:00:17.0: Found 1 remapped NVMe devices.
[    0.619887] ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them.
[    0.620026] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 16 ports 3 Gbps 0x0 impl RAID mode
[    0.620028] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst

Is there a firmware option to switch the drive from RAID to AHCI? Another possibility is the drive is behind a PCIE bridge that is not being probed correctly.

MeuhMeuh62 · 2024-01-07 12:57:38

Oh I need to switch to AHCI ok!
There are not any problems to switch to AHCI?(with windows, ect.)
I see how I can switch on Internet if you have any tutorials or forum post you can give me!

Head_on_a_Stick · 2024-01-07 13:00:51

https://www.elevenforum.com/t/change-fr … hci.12086/

MeuhMeuh62 · 2024-01-07 13:04:06

ty

MeuhMeuh62 · 2024-01-12 22:09:14

It's works ty

Arch Linux

#1 2024-01-07 12:17:25

2nd disk not recognised by arch (drivers issue?)

#2 2024-01-07 12:20:09

Re: 2nd disk not recognised by arch (drivers issue?)

#3 2024-01-07 12:23:12

Re: 2nd disk not recognised by arch (drivers issue?)

#4 2024-01-07 12:28:48

Re: 2nd disk not recognised by arch (drivers issue?)

#5 2024-01-07 12:43:17

Re: 2nd disk not recognised by arch (drivers issue?)

#6 2024-01-07 12:50:27

Re: 2nd disk not recognised by arch (drivers issue?)

#7 2024-01-07 12:57:38

Re: 2nd disk not recognised by arch (drivers issue?)

#8 2024-01-07 13:00:51

Re: 2nd disk not recognised by arch (drivers issue?)

#9 2024-01-07 13:04:06

Re: 2nd disk not recognised by arch (drivers issue?)

#10 2024-01-12 22:09:14

Re: 2nd disk not recognised by arch (drivers issue?)

Board footer