Can't get Elgato Wave 3 working on new computer

sudgy · 2024-01-11 20:54:10

Hello, I've been running Arch on a laptop for several years. On that laptop, I was able to use the Elgato Wave 3 microphone without any issues. I just got a new desktop, and now on this computer, I can't get the microphone working. Pulseaudio does see it, but for some reason it doesn't show any input. Here's how the mic looks in pavucontrol:

As you can see, it's unmuted and turned up, but there's not even a bar showing the input like you would expect. No programs are able to record with it either. Also, I have an old crappy microphone that does work (but sounds terrible because it's a bad mic), showing that it's a problem related to this particular microphone. I've looked up a lot about mic issues, but most of them don't seem to be quite the problem I have, and none of the solutions I tried worked.

Output of "pactl list sources":

Source #0
	State: RUNNING
	Name: alsa_output.pci-0000_05_00.1.hdmi-stereo-extra1.monitor
	Description: Monitor of Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI 2)
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.1.hdmi-stereo-extra1
	Latency: 0 usec, configured 6944 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Renoir Radeon High Definition Audio Controller Digital Stereo (HDMI 2)"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcc88000 irq 79"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:
		pcm

Source #1
	State: RUNNING
	Name: alsa_output.pci-0000_05_00.6.analog-stereo.monitor
	Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.6.analog-stereo
	Latency: 0 usec, configured 6944 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Family 17h/19h HD Audio Controller Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcc80000 irq 80"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:
		pcm

Source #2
	State: RUNNING
	Name: alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo.monitor
	Description: Monitor of Elgato Wave:3 Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s24le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 22
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo
	Latency: 0 usec, configured 16000 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Elgato Wave:3 Analog Stereo"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "Elgato Wave:3"
		alsa.long_card_name = "Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:01:00.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-2/1-2:1.0/sound/card2"
		udev.id = "usb-Elgato_Systems_Elgato_Wave:3_BS10L1A04651-00"
		device.bus = "usb"
		device.vendor.id = "0fd9"
		device.vendor.name = "Elgato Systems GmbH"
		device.product.id = "0070"
		device.product.name = "Elgato Wave:3"
		device.serial = "Elgato_Systems_Elgato_Wave:3_BS10L1A04651"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Formats:
		pcm

Source #3
	State: RUNNING
	Name: alsa_input.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.mono-fallback
	Description: Elgato Wave:3 Mono
	Driver: module-alsa-card.c
	Sample Specification: s24le 1ch 48000Hz
	Channel Map: mono
	Owner Module: 22
	Mute: no
	Volume: mono: 25107 /  38% / -25.00 dB
	        balance 0.00
	Base Volume: 14119 /  22% / -40.00 dB
	Monitor of Sink: n/a
	Latency: 18039410 usec, configured 6944 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "24"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "Elgato Wave:3"
		alsa.long_card_name = "Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:01:00.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-2/1-2:1.0/sound/card2"
		udev.id = "usb-Elgato_Systems_Elgato_Wave:3_BS10L1A04651-00"
		device.bus = "usb"
		device.vendor.id = "0fd9"
		device.vendor.name = "Elgato Systems GmbH"
		device.product.id = "0070"
		device.product.name = "Elgato Wave:3"
		device.serial = "Elgato_Systems_Elgato_Wave:3_BS10L1A04651"
		device.string = "hw:2"
		device.buffering.buffer_size = "288000"
		device.buffering.fragment_size = "144000"
		device.access_mode = "mmap+timer"
		device.profile.name = "mono-fallback"
		device.profile.description = "Mono"
		device.description = "Elgato Wave:3 Mono"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
	Active Port: analog-input-mic
	Formats:
		pcm

Output of "pulseaudio -v" when the mic is plugged in:

I: [pulseaudio] (alsa-lib)parser.c: UCM is not supported for this USB device (Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed @ USB0fd9:0070)
I: [pulseaudio] (alsa-lib)main.c: error: failed to import hw:2 use case configuration -6
I: [pulseaudio] (alsa-lib)parser.c: UCM is not supported for this USB device (Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed @ USB0fd9:0070)
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Elgato Wave:3 use case configuration -6
I: [pulseaudio] alsa-ucm.c: UCM not available for card Elgato Wave:3
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='front:2': Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='iec958:2': Invalid argument
I: [pulseaudio] alsa-util.c: Device front:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround21:2': Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround40:2': Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround41:2': Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround50:2': Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround51:2': Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='surround71:2': Invalid argument
I: [pulseaudio] alsa-util.c: Device iec958:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device iec958:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf
I: [pulseaudio] (alsa-lib)pcm_a52.c: Cannot get slave hw_params
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_a52.c: Cannot get slave hw_params
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.8:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,8
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,8: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.8:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,8
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,8: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.8:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,8
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,8: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,8
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,8: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.9:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,9
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,9: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.9:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,9
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,9: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.9:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,9
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,9: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,9
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,9: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.10:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,10
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,10: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.10:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,10
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,10: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.2.pcm.hdmi.10:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,10
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,10: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,10
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,10: No such file or directory
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:SLAVE='hw:2': Invalid argument
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-mic.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-linein.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-aux.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-video.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-fm.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
I: [pulseaudio] alsa-mixer.c: Loading path config: /usr/share//pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
I: [pulseaudio] alsa-util.c: Device front:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] alsa-util.c: Device iec958:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device iec958:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.
I: [pulseaudio] card.c: alsa_card.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00: active_profile: output:analog-stereo+input:mono-fallback
I: [pulseaudio] module-card-restore.c: Profile '' was previously automatically selected for card alsa_card.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.
I: [pulseaudio] card.c: Created 3 "alsa_card.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00"
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: Device front:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:2.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo: front-left: 58409 /  89%,   front-right: 58409 /  89%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo: unmuted
I: [pulseaudio] sink.c: Created sink 3 "alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo" with sample spec s24le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "24"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "USB Audio"
I: [pulseaudio] sink.c:     alsa.id = "USB Audio"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "2"
I: [pulseaudio] sink.c:     alsa.card_name = "Elgato Wave:3"
I: [pulseaudio] sink.c:     alsa.long_card_name = "Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:01:00.0-usb-0:2:1.0"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-2/1-2:1.0/sound/card2"
I: [pulseaudio] sink.c:     udev.id = "usb-Elgato_Systems_Elgato_Wave:3_BS10L1A04651-00"
I: [pulseaudio] sink.c:     device.bus = "usb"
I: [pulseaudio] sink.c:     device.vendor.id = "0fd9"
I: [pulseaudio] sink.c:     device.vendor.name = "Elgato Systems GmbH"
I: [pulseaudio] sink.c:     device.product.id = "0070"
I: [pulseaudio] sink.c:     device.product.name = "Elgato Wave:3"
I: [pulseaudio] sink.c:     device.serial = "Elgato_Systems_Elgato_Wave:3_BS10L1A04651"
I: [pulseaudio] sink.c:     device.string = "front:2"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "576000"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "288000"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c:     device.description = "Elgato Wave:3 Analog Stereo"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-usb"
I: [pulseaudio] source.c: Created source 4 "alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo.monitor" with sample spec s24le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Elgato Wave:3 Analog Stereo"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "2"
I: [pulseaudio] source.c:     alsa.card_name = "Elgato Wave:3"
I: [pulseaudio] source.c:     alsa.long_card_name = "Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:01:00.0-usb-0:2:1.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-2/1-2:1.0/sound/card2"
I: [pulseaudio] source.c:     udev.id = "usb-Elgato_Systems_Elgato_Wave:3_BS10L1A04651-00"
I: [pulseaudio] source.c:     device.bus = "usb"
I: [pulseaudio] source.c:     device.vendor.id = "0fd9"
I: [pulseaudio] source.c:     device.vendor.name = "Elgato Systems GmbH"
I: [pulseaudio] source.c:     device.product.id = "0070"
I: [pulseaudio] source.c:     device.product.name = "Elgato Wave:3"
I: [pulseaudio] source.c:     device.serial = "Elgato_Systems_Elgato_Wave:3_BS10L1A04651"
I: [pulseaudio] source.c:     device.string = "2"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 288000 bytes (1000.00ms), buffer size is 576000 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 12.25ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -60.00 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-USB Audio] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-USB Audio] alsa-sink.c: Starting playback.
I: [pulseaudio] core.c: default_source: alsa_output.pci-0000_05_00.6.analog-stereo.monitor -> alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo.monitor
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support sample format s16le, changed to s24le.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Mono' (mono-fallback).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.mono-fallback: mono: 25107 /  38%
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.mono-fallback: unmuted
I: [pulseaudio] source.c: Created source 5 "alsa_input.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.mono-fallback" with sample spec s24le 1ch 48000Hz and channel map mono
I: [pulseaudio] source.c:     alsa.resolution_bits = "24"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "USB Audio"
I: [pulseaudio] source.c:     alsa.id = "USB Audio"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "0"
I: [pulseaudio] source.c:     alsa.card = "2"
I: [pulseaudio] source.c:     alsa.card_name = "Elgato Wave:3"
I: [pulseaudio] source.c:     alsa.long_card_name = "Elgato Systems Elgato Wave:3 at usb-0000:01:00.0-2, full speed"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:01:00.0-usb-0:2:1.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-2/1-2:1.0/sound/card2"
I: [pulseaudio] source.c:     udev.id = "usb-Elgato_Systems_Elgato_Wave:3_BS10L1A04651-00"
I: [pulseaudio] source.c:     device.bus = "usb"
I: [pulseaudio] source.c:     device.vendor.id = "0fd9"
I: [pulseaudio] source.c:     device.vendor.name = "Elgato Systems GmbH"
I: [pulseaudio] source.c:     device.product.id = "0070"
I: [pulseaudio] source.c:     device.product.name = "Elgato Wave:3"
I: [pulseaudio] source.c:     device.serial = "Elgato_Systems_Elgato_Wave:3_BS10L1A04651"
I: [pulseaudio] source.c:     device.string = "hw:2"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "288000"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "144000"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "mono-fallback"
I: [pulseaudio] source.c:     device.profile.description = "Mono"
I: [pulseaudio] source.c:     device.description = "Elgato Wave:3 Mono"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 144000 bytes (1000.00ms), buffer size is 288000 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 24.50ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from 0.00 dB to 40.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -40.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-USB Audio] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] core.c: default_source: alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo.monitor -> alsa_input.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.mono-fallback
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #23; argument: "device_id="2" name="usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00" card_name="alsa_card.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-2/1-2:1.0/sound/card2 (alsa_card.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00) module loaded.
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] remap.c: Using stereo to mono remapping
I: [pulseaudio] source-output.c: Created output 4 "Peak detect" on alsa_output.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.analog-stereo.monitor with sample spec float32le 1ch 144Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "1174"
I: [pulseaudio] source-output.c:     application.process.user = "sudgy"
I: [pulseaudio] source-output.c:     application.process.host = "David-Desktop"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_US.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "46a95744552a43a18d0dfcbf9e758665"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 13.89 ms = 6.94 ms + 6.94 ms
I: [pulseaudio] source-output.c: Trying to change sample spec
I: [pulseaudio] source-output.c: Created output 5 "Peak detect" on alsa_input.usb-Elgato_Systems_Elgato_Wave_3_BS10L1A04651-00.mono-fallback with sample spec float32le 1ch 144Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "35"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "5.0"
I: [pulseaudio] source-output.c:     application.process.id = "1174"
I: [pulseaudio] source-output.c:     application.process.user = "sudgy"
I: [pulseaudio] source-output.c:     application.process.host = "David-Desktop"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_US.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "46a95744552a43a18d0dfcbf9e758665"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [pulseaudio] protocol-native.c: Final latency 13.89 ms = 6.94 ms + 6.94 ms

Let me know of any other commands I should run to help pinpoint the problem.

sudgy · 2024-01-12 22:35:40

Update: The mic actually works if I never open pavucontrol. After opening pavucontrol, the mic never works until I restart pulseaudio. At least I can get the mic working now, but it's still a rather annoying workaround and I would rather find an actual solution to the problem.

Arch Linux

#1 2024-01-11 20:54:10

Can't get Elgato Wave 3 working on new computer

#2 2024-01-12 22:35:40

Re: Can't get Elgato Wave 3 working on new computer

Board footer