You are not logged in.

Pages: 1

#1 2024-01-16 00:54:56

Fhunderhed
Member
Registered: 2024-01-15
Posts: 3

[SOLVED]Sound Cards not found after starting Xorg

EDIT: The solution was in the docs, I skipped over an important step of creating an /$HOME/.xerverrc file and modifying it as outlined in the docs https://wiki.archlinux.org/title/Xinit#xserverrc

Hello all, I am relatively inexperienced with Arch.

I cannot get my Sound Cards to be recognized by pulseaudio after I have started my xorg server(EDIT without superuser permissions)

I know that the hardware is being recognized by the OS because I can see it if I start my pulseaudio server before I start X.

$ pulseaudio --start
$ pacmd info | less 

2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_00_10.1>
    driver: <module-alsa-card.c>
    owner module: 24
    properties:
        alsa.card = "0"
        alsa.card_name = "HDA NVidia"
        alsa.long_card_name = "HDA NVidia at 0xfe6c8000 irq 10"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:10.1"
        sysfs.path = "/devices/pci0000:00/0000:00:10.1/sound/card0"
        device.bus = "pci"
        device.vendor.id = "10de"
        device.vendor.name = "NVIDIA Corporation"
        device.product.id = "0e0b"
        device.product.name = "GK106 HDMI Audio Controller"
        device.form_factor = "internal"
        device.string = "0"
        device.description = "Built-in Audio"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 38668, available: unknown)
        output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
        output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
        output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
        output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
        output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
        output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
        output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
        output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
        output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
        off: Off (priority 0, available: unknown)
    active profile: <output:hdmi-stereo>
    sinks:
        alsa_output.pci-0000_00_10.1.hdmi-stereo/#1: Built-in Audio Digital Stereo (HDMI)
    sources:
        alsa_output.pci-0000_00_10.1.hdmi-stereo.monitor/#1: Monitor of Built-in Audio Digital Stereo (HDMI)
    ports:
        hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "video-display"
                device.product.name = "XZ272U P
    "
        hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        index: 1
    name: <alsa_card.pci-0000_00_1c.0>
    driver: <module-alsa-card.c>
    owner module: 25
    properties:
        alsa.card = "1"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfe6c0000 irq 59"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1c.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1c.0/sound/card1"
        device.bus = "pci"
        device.vendor.id = "1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        device.product.id = "1487"
        device.product.name = "Starship/Matisse HD Audio Controller"
        device.form_factor = "internal"
        device.string = "1"
        device.description = "Built-in Audio"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        input:analog-stereo: Analog Stereo Input (priority 65, available: no)
        output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
        output:analog-surround-21: Analog Surround 2.1 Output (priority 34068, available: unknown)
        output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 1365, available: unknown)
        output:analog-surround-40: Analog Surround 4.0 Output (priority 33968, available: unknown)
        output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 1265, available: unknown)
        output:analog-surround-41: Analog Surround 4.1 Output (priority 34068, available: unknown)
        output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 1365, available: unknown)
        output:analog-surround-50: Analog Surround 5.0 Output (priority 33968, available: unknown)
        output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 1265, available: unknown)
        output:analog-surround-51: Analog Surround 5.1 Output (priority 34068, available: unknown)
        output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 1365, available: unknown)
        output:iec958-stereo: Digital Stereo (IEC958) Output (priority 38268, available: unknown)
        output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5565, available: unknown)
        output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (priority 300, available: unknown)
        output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (priority 365, available: no)
        off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo>
    sinks:
        alsa_output.pci-0000_00_1c.0.analog-stereo/#2: Built-in Audio Analog Stereo
    sources:
        alsa_output.pci-0000_00_1c.0.analog-stereo.monitor/#2: Monitor of Built-in Audio Analog Stereo
    ports:
        analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
            properties:
                
        analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
            properties:
                
        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-headphones"
        iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
            properties:
0 sink input(s) available.
0 source output(s) available.
0 cache entrie(s) available.

Because I have my headphones plugged into the Line Out aux port I know that this is correctly recognizing the hardware.

        analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
            properties:

I was able to test the Line Out before starting X by running 

speaker-test -Dhw:1 -c2

Everything functioned as intended

After I run xinit, I am still able to see the soundcards via pacmd and pavucontrol but cannot get output to work with X applications. If I restart pulseaudio or simply don't start it until after have launched xorg I am unable to locate the sound cards.

pacmd info

1 source(s) available.
  * index: 0
    name: <auto_null.monitor>
    driver: <module-null-sink.c>
    flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 1000
    volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max rewind: 344 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
    monitor_of: 0
    module: 15
    properties:
        device.description = "Monitor of Dummy Output"
        device.class = "monitor"
        device.icon_name = "audio-input-microphone"
2 client(s) logged in.
    index: 0
    driver: <module-systemd-login.c>
    owner module: 18
    properties:
        application.name = "Login Session 1"
        systemd-login.session = "1"
    index: 2
    driver: <cli.c>
    owner module: 23
    properties:
        application.name = "UNIX socket client"
0 card(s) available.
0 sink input(s) available.
0 source output(s) available.
0 cache entrie(s) available.

I am running Arch in a proxmox VM. I have a nvidia GPU running using the nvidia-470xx-dkms/utils AUR.

I was able to get bluetooth audio to work using  a bluetooth headset so I'm convinced that pulseaudio isn't the problem smile This solution only works if I start pulseaudio after X.

the result of journalctl entries:

journalctl -b | grep "pulseaudio"

Jan 15 17:06:31 archbox dbus-broker-launch[477]: Invalid user-name in /usr/share/dbus-1/system.d/pulseaudio-system.conf +27: user="pulse"
Jan 15 17:09:26 archbox pulseaudio[669]: Disabling timer-based scheduling because running inside a VM.
Jan 15 17:09:26 archbox pulseaudio[669]: Failed to open cookie file '/home/743F16/.config/pulse/cookie': No such file or directory
Jan 15 17:09:26 archbox pulseaudio[669]: Failed to load authentication key '/home/743F16/.config/pulse/cookie': No such file or directory
Jan 15 17:09:26 archbox pulseaudio[669]: bind(): Address already in use
Jan 15 17:09:26 archbox pulseaudio[669]: Failed to load module "module-native-protocol-unix" (argument: ""): initialization failed.
Jan 15 17:09:26 archbox pulseaudio[669]: Get() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable
Jan 15 17:09:26 archbox pulseaudio[678]: Daemon already running.
Jan 15 17:09:26 archbox pulseaudio[678]: pa_pid_file_create() failed.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Failed with result 'exit-code'.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
Jan 15 17:09:26 archbox pulseaudio[690]: Daemon already running.
Jan 15 17:09:26 archbox pulseaudio[690]: pa_pid_file_create() failed.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Failed with result 'exit-code'.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
Jan 15 17:09:26 archbox pulseaudio[693]: Daemon already running.
Jan 15 17:09:26 archbox pulseaudio[693]: pa_pid_file_create() failed.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Failed with result 'exit-code'.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
Jan 15 17:09:26 archbox pulseaudio[696]: Daemon already running.
Jan 15 17:09:26 archbox pulseaudio[696]: pa_pid_file_create() failed.
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Jan 15 17:09:26 archbox systemd[631]: pulseaudio.service: Failed with result 'exit-code'.
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
Jan 15 17:09:27 archbox pulseaudio[699]: Daemon already running.
Jan 15 17:09:27 archbox pulseaudio[699]: pa_pid_file_create() failed.
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.service: Failed with result 'exit-code'.
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.service: Start request repeated too quickly.
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.service: Failed with result 'exit-code'.
Jan 15 17:09:27 archbox systemd[631]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
Jan 15 17:11:14 archbox pulseaudio[761]: Failed to open cookie file '/home/743F16/.config/pulse/cookie': No such file or directory
Jan 15 17:11:14 archbox pulseaudio[761]: Failed to load authentication key '/home/743F16/.config/pulse/cookie': No such file or directory
Jan 15 17:11:14 archbox pulseaudio[761]: Get() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable

EDIT #1:
As far as I can tell, my GPU is functioning well. I can monitor it with nvtop and see how it performs with steam games. The only issue(I'm aware of) is related to audio.

I have re-created my .xinitrc file from the defualt /etc/X11/xinit/xinitrc config and it has not made any noticeable difference.



I have been able to get my cards recognized by using 

$ sudo aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, XZ272U P
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALCS1200A Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    Front output / input
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
    HD-Audio Generic, ALCS1200A Digital
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [XZ272U P]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALCS1200A Analog [ALCS1200A Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALCS1200A Digital [ALCS1200A Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

I don't know what this tells me though, becuase they are still not showing up in pavucontrol or pacmd.

Last edited by Fhunderhed (2024-01-17 18:21:33)

Offline

#2 2024-01-16 09:40:02

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: [SOLVED]Sound Cards not found after starting Xorg

Please use [code][/code] tags. Edit your post in this regard.
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

Chances are that the HDMI is on a dGPU and you're deactivating that when starting X11?
Also, are you using pulseaudio, pipewire or both?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2024-01-17 10:02:15

Fhunderhed
Member
Registered: 2024-01-15
Posts: 3

Re: [SOLVED]Sound Cards not found after starting Xorg

I never configured and just uninstalled pipewire then rebooted, no luck. I'm only using pulseaudio.
the Xorg logs:

[   121.253] 
X.Org X Server 1.21.1.10
X Protocol Version 11, Revision 0
[   121.253] Current Operating System: Linux archbox 6.7.0-arch3-1 #1 SMP PREEMPT_DYNAMIC Sat, 13 Jan 2024 14:37:14 +0000 x86_64
[   121.253] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/Volume_01-root rw loglevel=3 quiet
[   121.254]  
[   121.254] Current version of pixman: 0.43.0
[   121.254] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   121.254] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   121.255] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 17 02:45:32 2024
[   121.258] (==) Using config file: "/etc/X11/xorg.conf"
[   121.258] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   121.258] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   121.260] (==) ServerLayout "Layout0"
[   121.260] (**) |-->Screen "Screen0" (0)
[   121.260] (**) |   |-->Monitor "Monitor0"
[   121.260] (**) |   |-->Device "Device0"
[   121.260] (**) |-->Input Device "Keyboard0"
[   121.260] (**) |-->Input Device "Mouse0"
[   121.260] (==) Automatically adding devices
[   121.260] (==) Automatically enabling devices
[   121.260] (==) Automatically adding GPU devices
[   121.260] (==) Automatically binding GPU devices
[   121.260] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   121.262] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   121.262] 	Entry deleted from font path.
[   121.262] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   121.262] 	Entry deleted from font path.
[   121.262] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   121.262] 	Entry deleted from font path.
[   121.262] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   121.262] 	Entry deleted from font path.
[   121.262] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   121.262] 	Entry deleted from font path.
[   121.262] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   121.262] 	Entry deleted from font path.
[   121.262] (==) FontPath set to:
	
[   121.262] (==) ModulePath set to "/usr/lib/xorg/modules"
[   121.262] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   121.262] (WW) Disabling Keyboard0
[   121.262] (WW) Disabling Mouse0
[   121.262] (II) Module ABI versions:
[   121.262] 	X.Org ANSI C Emulation: 0.4
[   121.262] 	X.Org Video Driver: 25.2
[   121.262] 	X.Org XInput driver : 24.4
[   121.262] 	X.Org Server Extension : 10.0
[   121.262] (--) using VT number 2

[   121.262] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   121.262] (II) xfree86: Adding drm device (/dev/dri/card1)
[   121.262] (II) Platform probe for /sys/devices/pci0000:00/0000:00:10.0/drm/card1
[   121.263] (II) xfree86: Adding drm device (/dev/dri/card0)
[   121.263] (II) Platform probe for /sys/devices/platform/simple-framebuffer.0/drm/card0
[   121.265] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   121.267] (--) PCI:*(0@0:16:0) 10de:11c6:3842:3059 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/131072
[   121.267] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   121.267] (II) LoadModule: "glx"
[   121.267] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   121.271] (II) Module glx: vendor="X.Org Foundation"
[   121.271] 	compiled for 1.21.1.10, module version = 1.0.0
[   121.271] 	ABI class: X.Org Server Extension, version 10.0
[   121.271] (II) LoadModule: "nvidia"
[   121.271] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   121.274] (II) Module nvidia: vendor="NVIDIA Corporation"
[   121.274] 	compiled for 1.6.99.901, module version = 1.0.0
[   121.274] 	Module class: X.Org Video Driver
[   121.274] (II) NVIDIA dlloader X Driver  470.223.02  Sat Oct  7 15:36:12 UTC 2023
[   121.274] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   121.278] (II) Loading sub module "fb"
[   121.278] (II) LoadModule: "fb"
[   121.278] (II) Module "fb" already built-in
[   121.278] (II) Loading sub module "wfb"
[   121.278] (II) LoadModule: "wfb"
[   121.278] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   121.278] (II) Module wfb: vendor="X.Org Foundation"
[   121.278] 	compiled for 1.21.1.10, module version = 1.0.0
[   121.278] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   121.278] (II) Loading sub module "ramdac"
[   121.278] (II) LoadModule: "ramdac"
[   121.278] (II) Module "ramdac" already built-in
[   121.279] (II) NVIDIA(0): nvCommonPlatformProbe: Device is NULL
[   121.279] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   121.279] (==) NVIDIA(0): RGB weight 888
[   121.279] (==) NVIDIA(0): Default visual is TrueColor
[   121.279] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   121.279] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[   121.279] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   121.279] (**) NVIDIA(0): Enabling 2D acceleration
[   121.279] (II) Loading sub module "glxserver_nvidia"
[   121.279] (II) LoadModule: "glxserver_nvidia"
[   121.279] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   121.298] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   121.298] 	compiled for 1.6.99.901, module version = 1.0.0
[   121.298] 	Module class: X.Org Server Extension
[   121.298] (II) NVIDIA GLX Module  470.223.02  Sat Oct  7 15:34:45 UTC 2023
[   121.299] (II) NVIDIA: The X server supports PRIME Render Offload.
[   123.484] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:0:16:0
[   123.484] (--) NVIDIA(0):     CRT-0
[   123.484] (--) NVIDIA(0):     DFP-0 (boot)
[   123.484] (--) NVIDIA(0):     DFP-1
[   123.484] (--) NVIDIA(0):     DFP-2
[   123.484] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 650 Ti (GK106) at PCI:0:16:0
[   123.484] (II) NVIDIA(0):     (GPU-0)
[   123.484] (--) NVIDIA(0): Memory: 2097152 kBytes
[   123.484] (--) NVIDIA(0): VideoBIOS: 80.06.21.00.50
[   123.484] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   123.512] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   123.512] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   123.512] (--) NVIDIA(GPU-0): 
[   123.546] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
[   123.546] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
[   123.546] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
[   123.546] (--) NVIDIA(GPU-0): 
[   123.563] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): connected
[   123.563] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): Internal TMDS
[   123.563] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): 340.0 MHz maximum pixel clock
[   123.563] (--) NVIDIA(GPU-0): 
[   123.563] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   123.563] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[   123.563] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[   123.563] (--) NVIDIA(GPU-0): 
[   123.566] (==) NVIDIA(0): 
[   123.566] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   123.566] (==) NVIDIA(0):     will be used as the requested mode.
[   123.566] (==) NVIDIA(0): 
[   123.566] (II) NVIDIA(0): Validated MetaModes:
[   123.566] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[   123.566] (II) NVIDIA(0): Virtual screen size determined to be 4240 x 1440
[   123.568] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[   123.568] (--) NVIDIA(0):     option
[   123.568] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[   123.568] (II) NVIDIA:     access.
[   123.570] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   123.570] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   123.570] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   123.570] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   123.570] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   123.570] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   123.570] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   123.570] (II) NVIDIA(0):     Config Options in the README.
[   123.582] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[   123.636] (==) NVIDIA(0): Disabling shared memory pixmaps
[   123.636] (==) NVIDIA(0): Backing store enabled
[   123.636] (==) NVIDIA(0): Silken mouse enabled
[   123.637] (**) NVIDIA(0): DPMS enabled
[   123.637] (II) Loading sub module "dri2"
[   123.637] (II) LoadModule: "dri2"
[   123.637] (II) Module "dri2" already built-in
[   123.637] (II) NVIDIA(0): [DRI2] Setup complete
[   123.637] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   123.637] (II) Initializing extension Generic Event Extension
[   123.637] (II) Initializing extension SHAPE
[   123.637] (II) Initializing extension MIT-SHM
[   123.637] (II) Initializing extension XInputExtension
[   123.637] (II) Initializing extension XTEST
[   123.637] (II) Initializing extension BIG-REQUESTS
[   123.637] (II) Initializing extension SYNC
[   123.637] (II) Initializing extension XKEYBOARD
[   123.637] (II) Initializing extension XC-MISC
[   123.637] (II) Initializing extension SECURITY
[   123.637] (II) Initializing extension XFIXES
[   123.637] (II) Initializing extension RENDER
[   123.637] (II) Initializing extension RANDR
[   123.637] (II) Initializing extension COMPOSITE
[   123.638] (II) Initializing extension DAMAGE
[   123.638] (II) Initializing extension MIT-SCREEN-SAVER
[   123.638] (II) Initializing extension DOUBLE-BUFFER
[   123.638] (II) Initializing extension RECORD
[   123.638] (II) Initializing extension DPMS
[   123.638] (II) Initializing extension Present
[   123.638] (II) Initializing extension DRI3
[   123.638] (II) Initializing extension X-Resource
[   123.638] (II) Initializing extension XVideo
[   123.638] (II) Initializing extension XVideo-MotionCompensation
[   123.638] (II) Initializing extension GLX
[   123.638] (II) Initializing extension GLX
[   123.638] (II) Indirect GLX disabled.
[   123.638] (II) GLX: Another vendor is already registered for screen 0
[   123.638] (II) Initializing extension XFree86-VidModeExtension
[   123.638] (II) Initializing extension XFree86-DGA
[   123.638] (II) Initializing extension XFree86-DRI
[   123.638] (II) Initializing extension DRI2
[   123.638] (II) Initializing extension NV-GLX
[   123.638] (II) Initializing extension NV-CONTROL
[   123.638] (II) Initializing extension XINERAMA
[   123.671] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   123.671] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   123.671] (II) LoadModule: "libinput"
[   123.671] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   123.674] (II) Module libinput: vendor="X.Org Foundation"
[   123.674] 	compiled for 1.21.1.8, module version = 1.4.0
[   123.674] 	Module class: X.Org XInput Driver
[   123.674] 	ABI class: X.Org XInput driver, version 24.4
[   123.674] (II) Using input driver 'libinput' for 'Power Button'
[   123.674] (**) Power Button: always reports core events
[   123.674] (**) Option "Device" "/dev/input/event0"
[   123.678] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   123.678] (II) event0  - Power Button: device is a keyboard
[   123.678] (II) event0  - Power Button: device removed
[   123.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[   123.700] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   123.700] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   123.700] (II) event0  - Power Button: device is a keyboard
[   123.701] (II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/event2)
[   123.701] (**) QEMU QEMU USB Tablet: Applying InputClass "libinput pointer catchall"
[   123.701] (II) Using input driver 'libinput' for 'QEMU QEMU USB Tablet'
[   123.701] (**) QEMU QEMU USB Tablet: always reports core events
[   123.701] (**) Option "Device" "/dev/input/event2"
[   123.847] (II) event2  - QEMU QEMU USB Tablet: is tagged by udev as: Mouse
[   123.847] (II) event2  - QEMU QEMU USB Tablet: device is a pointer
[   123.847] (II) event2  - QEMU QEMU USB Tablet: device removed
[   123.880] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3/event2"
[   123.880] (II) XINPUT: Adding extended input device "QEMU QEMU USB Tablet" (type: MOUSE, id 7)
[   123.880] (**) Option "AccelerationScheme" "none"
[   123.880] (**) QEMU QEMU USB Tablet: (accel) selected scheme none/0
[   123.880] (**) QEMU QEMU USB Tablet: (accel) acceleration factor: 2.000
[   123.880] (**) QEMU QEMU USB Tablet: (accel) acceleration threshold: 4
[   123.937] (II) event2  - QEMU QEMU USB Tablet: is tagged by udev as: Mouse
[   123.937] (II) event2  - QEMU QEMU USB Tablet: device is a pointer
[   123.937] (II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/mouse0)
[   123.937] (II) No input driver specified, ignoring this device.
[   123.937] (II) This device may have been added with another device file.
[   123.938] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[   123.938] (II) No input driver specified, ignoring this device.
[   123.938] (II) This device may have been added with another device file.
[   123.938] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[   123.938] (II) No input driver specified, ignoring this device.
[   123.938] (II) This device may have been added with another device file.
[   123.938] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[   123.938] (II) No input driver specified, ignoring this device.
[   123.938] (II) This device may have been added with another device file.
[   123.938] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[   123.938] (II) No input driver specified, ignoring this device.
[   123.938] (II) This device may have been added with another device file.
[   123.938] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event13)
[   123.938] (II) No input driver specified, ignoring this device.
[   123.938] (II) This device may have been added with another device file.
[   123.938] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event14)
[   123.938] (II) No input driver specified, ignoring this device.
[   123.938] (II) This device may have been added with another device file.
[   123.939] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event15)
[   123.939] (II) No input driver specified, ignoring this device.
[   123.939] (II) This device may have been added with another device file.
[   123.939] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event16)
[   123.939] (II) No input driver specified, ignoring this device.
[   123.939] (II) This device may have been added with another device file.
[   123.939] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event17)
[   123.939] (II) No input driver specified, ignoring this device.
[   123.939] (II) This device may have been added with another device file.
[   123.939] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event18)
[   123.939] (II) No input driver specified, ignoring this device.
[   123.939] (II) This device may have been added with another device file.
[   123.939] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event19)
[   123.939] (II) No input driver specified, ignoring this device.
[   123.939] (II) This device may have been added with another device file.
[   123.939] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event3)
[   123.939] (**) Logitech Optical USB Mouse: Applying InputClass "libinput pointer catchall"
[   123.939] (II) Using input driver 'libinput' for 'Logitech Optical USB Mouse'
[   123.939] (**) Logitech Optical USB Mouse: always reports core events
[   123.939] (**) Option "Device" "/dev/input/event3"
[   123.997] (II) event3  - Logitech Optical USB Mouse: is tagged by udev as: Mouse
[   123.997] (II) event3  - Logitech Optical USB Mouse: device set to 400 DPI
[   123.997] (II) event3  - Logitech Optical USB Mouse: device is a pointer
[   123.997] (II) event3  - Logitech Optical USB Mouse: device removed
[   124.030] (II) libinput: Logitech Optical USB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   124.030] (II) libinput: Logitech Optical USB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   124.030] (II) libinput: Logitech Optical USB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   124.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:1b.0/usb2/2-1/2-1:1.0/0003:046D:C016.0002/input/input4/event3"
[   124.030] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8)
[   124.030] (**) Option "AccelerationScheme" "none"
[   124.030] (**) Logitech Optical USB Mouse: (accel) selected scheme none/0
[   124.030] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[   124.030] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[   124.087] (II) event3  - Logitech Optical USB Mouse: is tagged by udev as: Mouse
[   124.087] (II) event3  - Logitech Optical USB Mouse: device set to 400 DPI
[   124.087] (II) event3  - Logitech Optical USB Mouse: device is a pointer
[   124.087] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse1)
[   124.088] (II) No input driver specified, ignoring this device.
[   124.088] (II) This device may have been added with another device file.
[   124.088] (II) config/udev: Adding input device Dell KB216 Wired Keyboard (/dev/input/event4)
[   124.088] (**) Dell KB216 Wired Keyboard: Applying InputClass "libinput keyboard catchall"
[   124.088] (II) Using input driver 'libinput' for 'Dell KB216 Wired Keyboard'
[   124.088] (**) Dell KB216 Wired Keyboard: always reports core events
[   124.088] (**) Option "Device" "/dev/input/event4"
[   124.088] (II) event4  - Dell KB216 Wired Keyboard: is tagged by udev as: Keyboard
[   124.088] (II) event4  - Dell KB216 Wired Keyboard: device is a keyboard
[   124.089] (II) event4  - Dell KB216 Wired Keyboard: device removed
[   124.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:1b.0/usb2/2-2/2-2:1.0/0003:413C:2113.0003/input/input5/event4"
[   124.103] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard" (type: KEYBOARD, id 9)
[   124.104] (II) event4  - Dell KB216 Wired Keyboard: is tagged by udev as: Keyboard
[   124.104] (II) event4  - Dell KB216 Wired Keyboard: device is a keyboard
[   124.104] (II) config/udev: Adding input device Dell KB216 Wired Keyboard System Control (/dev/input/event5)
[   124.104] (**) Dell KB216 Wired Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[   124.104] (II) Using input driver 'libinput' for 'Dell KB216 Wired Keyboard System Control'
[   124.104] (**) Dell KB216 Wired Keyboard System Control: always reports core events
[   124.104] (**) Option "Device" "/dev/input/event5"
[   124.105] (II) event5  - Dell KB216 Wired Keyboard System Control: is tagged by udev as: Keyboard
[   124.105] (II) event5  - Dell KB216 Wired Keyboard System Control: device is a keyboard
[   124.105] (II) event5  - Dell KB216 Wired Keyboard System Control: device removed
[   124.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:1b.0/usb2/2-2/2-2:1.1/0003:413C:2113.0004/input/input6/event5"
[   124.120] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard System Control" (type: KEYBOARD, id 10)
[   124.120] (II) event5  - Dell KB216 Wired Keyboard System Control: is tagged by udev as: Keyboard
[   124.121] (II) event5  - Dell KB216 Wired Keyboard System Control: device is a keyboard
[   124.121] (II) config/udev: Adding input device Dell KB216 Wired Keyboard Consumer Control (/dev/input/event6)
[   124.121] (**) Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   124.121] (II) Using input driver 'libinput' for 'Dell KB216 Wired Keyboard Consumer Control'
[   124.121] (**) Dell KB216 Wired Keyboard Consumer Control: always reports core events
[   124.121] (**) Option "Device" "/dev/input/event6"
[   124.122] (II) event6  - Dell KB216 Wired Keyboard Consumer Control: is tagged by udev as: Keyboard
[   124.122] (II) event6  - Dell KB216 Wired Keyboard Consumer Control: device is a keyboard
[   124.122] (II) event6  - Dell KB216 Wired Keyboard Consumer Control: device removed
[   124.153] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:02:1b.0/usb2/2-2/2-2:1.1/0003:413C:2113.0004/input/input7/event6"
[   124.153] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard Consumer Control" (type: KEYBOARD, id 11)
[   124.154] (II) event6  - Dell KB216 Wired Keyboard Consumer Control: is tagged by udev as: Keyboard
[   124.154] (II) event6  - Dell KB216 Wired Keyboard Consumer Control: device is a keyboard
[   124.154] (II) config/udev: Adding input device Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller (/dev/input/event7)
[   124.154] (**) Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller: Applying InputClass "joystick catchall"
[   124.154] (II) LoadModule: "joystick"
[   124.154] (WW) Warning, couldn't open module joystick
[   124.154] (EE) Failed to load module "joystick" (module does not exist, 0)
[   124.154] (EE) No input driver matching `joystick'
[   124.154] (II) Falling back to input driver `libinput'
[   124.154] (II) Using input driver 'libinput' for 'Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller'
[   124.154] (**) Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller: always reports core events
[   124.154] (**) Option "Device" "/dev/input/event7"
[   124.210] (II) event7  - Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller: is tagged by udev as: Joystick
[   124.210] (II) event7  - Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller: device is a joystick or a gamepad, ignoring
[   124.243] (II) event7  - not using input device '/dev/input/event7'.
[   124.243] (EE) libinput: Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller: Failed to create a device for /dev/input/event7
[   124.243] (EE) PreInit returned 2 for "Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller"
[   124.243] (II) UnloadModule: "libinput"
[   124.243] (II) config/udev: Adding input device Bensussen Deutsch & Associates,Inc.(BDA) Core (Plus) Wired Controller (/dev/input/js0)
[   124.243] (II) No input driver specified, ignoring this device.
[   124.243] (II) This device may have been added with another device file.
[   124.244] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[   124.244] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   124.244] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   124.244] (**) AT Translated Set 2 keyboard: always reports core events
[   124.244] (**) Option "Device" "/dev/input/event1"
[   124.244] (II) event1  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   124.244] (II) event1  - AT Translated Set 2 keyboard: device is a keyboard
[   124.244] (II) event1  - AT Translated Set 2 keyboard: device removed
[   124.260] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[   124.260] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   124.260] (II) event1  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   124.260] (II) event1  - AT Translated Set 2 keyboard: device is a keyboard
[   124.261] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event20)
[   124.261] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[   124.261] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[   124.261] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[   124.261] (**) Option "Device" "/dev/input/event20"
[   124.261] (II) event20 - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[   124.261] (II) event20 - ImExPS/2 Generic Explorer Mouse: device is a pointer
[   124.261] (II) event20 - ImExPS/2 Generic Explorer Mouse: device removed
[   124.293] (II) libinput: ImExPS/2 Generic Explorer Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   124.293] (II) libinput: ImExPS/2 Generic Explorer Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   124.293] (II) libinput: ImExPS/2 Generic Explorer Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   124.293] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event20"
[   124.293] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 13)
[   124.293] (**) Option "AccelerationScheme" "none"
[   124.293] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[   124.293] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[   124.293] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[   124.293] (II) event20 - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[   124.294] (II) event20 - ImExPS/2 Generic Explorer Mouse: device is a pointer
[   124.294] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[   124.294] (II) No input driver specified, ignoring this device.
[   124.294] (II) This device may have been added with another device file.
[   124.294] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[   124.294] (II) No input driver specified, ignoring this device.
[   124.294] (II) This device may have been added with another device file.
[   124.393] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   124.393] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   124.393] (--) NVIDIA(GPU-0): 
[   124.427] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
[   124.427] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
[   124.427] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
[   124.427] (--) NVIDIA(GPU-0): 
[   124.444] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): connected
[   124.444] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): Internal TMDS
[   124.444] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): 340.0 MHz maximum pixel clock
[   124.444] (--) NVIDIA(GPU-0): 
[   124.444] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   124.444] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[   124.444] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[   124.444] (--) NVIDIA(GPU-0): 
[   125.462] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): connected
[   125.462] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): Internal TMDS
[   125.462] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): 340.0 MHz maximum pixel clock
[   125.462] (--) NVIDIA(GPU-0): 
[   125.479] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): connected
[   125.479] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): Internal TMDS
[   125.479] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): 340.0 MHz maximum pixel clock
[   125.479] (--) NVIDIA(GPU-0): 
[   127.321] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): connected
[   127.321] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): Internal TMDS
[   127.321] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): 340.0 MHz maximum pixel clock
[   127.321] (--) NVIDIA(GPU-0): 
[   127.338] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): connected
[   127.338] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): Internal TMDS
[   127.338] (--) NVIDIA(GPU-0): Acer XZ272U P (DFP-1): 340.0 MHz maximum pixel clock
[   127.338] (--) NVIDIA(GPU-0):

Based on this:
[   123.939] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event16)
[   123.939] (II) No input driver specified, ignoring this device.
I'm wondering if I just need to setup udev rules?

Last edited by Fhunderhed (2024-01-17 10:13:01)

Offline

#4 2024-01-17 12:53:47

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,232

Re: [SOLVED]Sound Cards not found after starting Xorg

I don't think that's related. after starting xorg

sudo fuser -v /dev/snd/*
printenv DBUS_SESSION_BUS_ADDRESS
systemctl --user status pulseaudio

chances are you're simply starting xorg without importing the user environment into systemd, make sure you've read and applied the notes in http://wiki.archlinux.org/index.php/Xinit#xinitrc wrt the imports you need to do when using startx.

Online

#5 2024-01-17 18:22:26

Fhunderhed
Member
Registered: 2024-01-15
Posts: 3

Re: [SOLVED]Sound Cards not found after starting Xorg

Thanks for the help!

Offline

Pages: 1

Board footer

Powered by FluxBB