Arch Linux

WIka

Member

Registered: 2024-01-13

Posts: 13

Stereo output + HDMI

so here is what is going on, I on the laptop watch youtube or edit my videos, while my laptop connected to the TV Screen via HDMI so my family can watch news/netflix or anything
in windows you can customize the audio output for each app so for an example spotify and opera gx use my laptop as a sound output, while my family watchs on the TV on "Brave"
but i couldn't really find a way to do this on arch
im using pulseaudio and im kind of new to arch

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 22,387

Re: Stereo output + HDMI

You can do this with pulseaudio, look at the gui of e.g. pavucontrol

If it's not obvious from that what's your card setup ?

aplay -lL
pactl list cards
pactl list sinks
#With something actively playing
sudo fuser -v /dev/snd/*
pactl list sink-inputs

WIka

Member

Registered: 2024-01-13

Posts: 13

Re: Stereo output + HDMI

i've tried pavucontrol but i cant use stereo output and HDMI at the same time its either stereo or HDMI alone

aplay -lL
bash: aplay: command not found

pactl list cards

Card #0
        Name: alsa_card.pci-0000_00_1f.3
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xc2418000 irq 132"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1f.3"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "9dc8"
                device.product.name = "Cannon Point-LP High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: yes)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: yes)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: yes)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
                analog-input-headphone-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
                analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-speakers"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo

pactl list sinks

Sink #0
        State: RUNNING
        Name: alsa_output.pci-0000_00_1f.3.analog-stereo
        Description: Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 28180 /  43% / -21.99 dB,   front-right: 28180 /  43% / -21.99 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
        Latency: 200459 usec, configured 200000 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC3204 Analog"
                alsa.id = "ALC3204 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xc2418000 irq 132"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1f.3"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "9dc8"
                device.product.name = "Cannon Point-LP High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability unknown)
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 2, availability unknown)
        Active Port: analog-output-headphones
        Formats:
                pcm

Sink #1
        State: RUNNING
        Name: combined
        Description: Simultaneous output to Built-in Audio Analog Stereo
        Driver: module-combine-sink.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 14
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: combined.monitor
        Latency: 200543 usec, configured 200000 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.class = "filter"
                device.description = "Simultaneous output to Built-in Audio Analog Stereo"
                device.icon_name = "audio-card"
        Formats:
                pcm

sudo fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  wika       1169 F.... pulseaudio
/dev/snd/pcmC0D0p:   wika       1169 F...m pulseaudio

pactl list sink-inputs

Sink Input #1
        Driver: module-combine-sink.c
        Owner Module: 14
        Client: n/a
        Sink: 0
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Format: pcm, format.sample_format = "\"s16le\""  format.rate = "44100"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
        Corked: no
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Buffer Latency: 181 usec
        Sink Latency: 131036 usec
        Resample method: speex-float-1
        Properties:
                media.name = "Simultaneous output on Built-in Audio Analog Stereo"
                media.role = "filter"
                module-stream-restore.id = "sink-input-by-media-role:filter"

Sink Input #2
        Driver: protocol-native.c
        Owner Module: 12
        Client: 5
        Sink: 1
        Sample Specification: float32le 2ch 44100Hz
        Channel Map: front-left,front-right
        Format: pcm, format.sample_format = "\"float32le\""  format.rate = "44100"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
        Corked: no
        Mute: no
        Volume: front-left: 65535 / 100% / -0.00 dB,   front-right: 65535 / 100% / -0.00 dB
                balance 0.00
        Buffer Latency: 1799841 usec
        Sink Latency: 130995 usec
        Resample method: copy
        Properties:
                media.role = "music"
                media.name = "Spotify"
                application.name = "spotify"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "35"
                application.process.id = "1420"
                application.process.user = "wika"
                application.process.host = "archlinux"
                application.process.binary = "spotify"
                application.language = "en_US.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "491ba33b49994101bb0e5ace1171bcc3"
                application.process.session_id = "2"
                module-stream-restore.id = "sink-input-by-media-role:music"

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 22,387

Re: Stereo output + HDMI

Right so it's one of those cases... You can configure pulses profile logic, the simplest case would be to just edit /usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf and at the end of the file you should have a commented out custom profile example, for your case that would need to look like

[Profile   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo]
description = Profile showing both HDMI and analog
output-mappings = analog-stereo hdmi-stereo
input-mappings = analog-stereo

note to pick the correct one from hdmi-stereo, or hdmi-stereo-extra1 and so forth depending on which of them is the one actually producing audio if HDMI is connected. After you've done that a

systemctl --user restart pulseaudio

should give you the additional profile to select, exposing the HDMI sink as well to which you can then move streams in pavucontrol. To keep the setting that way, you'll want to add

NoUpgrade = usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf

to your pacman.conf so that your change doesn't get overwritten.

If that doesn't work still, we'll have to see the aplay -lL which you can get from the alsa-utils package.

WIka

Member

Registered: 2024-01-13

Posts: 13

Re: Stereo output + HDMI

Hello again
i did all the steps and tried both hdmi-stereo and hdmi-stereo-extra1, so i find the profile and i can switch between "built-in audio analog stereo" and "built-in audio digital stereo (HDMI) or (HDMI2)"
but when i choose in pavucontrol HDMI dont work

aplay -IL

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
    HDA Intel PCH, ALC3204 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    Front output / input
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3204 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, LG TV
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3204 Analog [ALC3204 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [LG TV]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

btw usually i use HDMI 5.1

Last edited by WIka (2024-01-15 18:00:03)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 22,387

Re: Stereo output + HDMI

Does

speaker-test -Dhw:0,3 -c2

give you noise out of the HDMI. The HDMI isn't muted on the monitor itself?

WIka

Member

Registered: 2024-01-13

Posts: 13

Re: Stereo output + HDMI

only makes noise when im on digital stereo (HDMI), dont make noise when im on the new profile

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 22,387

Re: Stereo output + HDMI

This logic should be independent of pulse.

After adding and switching to the new profile what's your

pactl list cards
pactl list sinks

?

WIka

Member

Registered: 2024-01-13

Posts: 13

Re: Stereo output + HDMI

[wika@archlinux ~]$ pactl list cards
Card #0
        Name: alsa_card.pci-0000_00_1f.3
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xc2418000 irq 132"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1f.3"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "9dc8"
                device.product.name = "Cannon Point-LP High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                  output:analog-stereo+output:hdmi-stereo:+input:analog-stereo: Profile showing both HDMI and analog (sinks: 2, sources: 1, priority: 32769, available: yes)
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: yes)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: yes)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: yes)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: yes)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile:   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo
        Ports:
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-speakers"
                        Part of profile(s):   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo, output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s):   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo, output:analog-stereo, output:analog-stereo+input:analog-stereo
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s):   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo, output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
                analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s):   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo, input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
                analog-input-headphone-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s):   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo, input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
                analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s):   output:analog-stereo+output:hdmi-stereo:+input:analog-stereo, input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo

[wika@archlinux ~]$ pactl list sinks
Sink #0
        State: RUNNING
        Name: alsa_output.pci-0000_00_1f.3.analog-stereo
        Description: Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 28180 /  43% / -21.99 dB,   front-right: 28180 /  43% / -21.99 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
        Latency: 636356 usec, configured 980000 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC3204 Analog"
                alsa.id = "ALC3204 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xc2418000 irq 132"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1f.3"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "9dc8"
                device.product.name = "Cannon Point-LP High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability unknown)
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 2, availability unknown)
        Active Port: analog-output-headphones
        Formats:
                pcm

Sink #1
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_1f.3.hdmi-stereo
        Description: Built-in Audio Digital Stereo (HDMI)
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 55050 /  84% / -4.54 dB,   front-right: 55050 /  84% / -4.54 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "HDMI 0"
                alsa.id = "HDMI 0"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "3"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xc2418000 irq 132"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1f.3"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "9dc8"
                device.product.name = "Cannon Point-LP High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "hdmi:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo"
                device.profile.description = "Digital Stereo (HDMI)"
                device.description = "Built-in Audio Digital Stereo (HDMI)"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, not available)
        Active Port: hdmi-output-0
        Formats:
                pcm

Sink #2
        State: SUSPENDED
        Name: combined
        Description: Simultaneous output to Built-in Audio Analog Stereo, Built-in Audio Digital Stereo (HDMI)
        Driver: module-combine-sink.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 14
        Mute: no
        Volume: front-left: 53084 /  81% / -5.49 dB,   front-right: 53084 /  81% / -5.49 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: combined.monitor
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.class = "filter"
                device.description = "Simultaneous output to Built-in Audio Analog Stereo, Built-in Audio Digital Stereo (HDMI)"
                device.icon_name = "audio-card"
        Formats:
                pcm

on headphones

WIka

Member

Registered: 2024-01-13

Posts: 13

Re: Stereo output + HDMI

So there's no fix for this?

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 22,387

Re: Stereo output + HDMI

setup wise things are correct.

paplay -d alsa_output.pci-0000_00_1f.3.analog-stereo test.wav
paplay -d alsa_output.pci-0000_00_1f.3.hdmi-stereo test.wav

replace test.wav with a wav of your choosing. If that doesn't work but seems to play back while things are playing back

sudo fuser -v /dev/snd/*
aplay -l
pactl list sinks
pactl list sink-inputs

WIka

Member

Registered: 2024-01-13

Posts: 13

Re: Stereo output + HDMI

sorry for the late response
i went through some problems and had to reinstall linux a few times so i had to do the steps again, but now it seems to work fine? i just added the profile and tried to use it and its working, if anything happens i will inform you
Thank for the help appreciate it !