You are not logged in.
- Topics: Active | Unanswered
#1 2024-01-16 09:08:04
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Blank screen with newer kernels, no luck with downgrading anymore
After the update to the kernel 6.5.3 my monitors stayed black after grub. I was able to work around it by downgrading the kernel and using an lts kernel instead. The update from today killed that and I am not able to recover the system with those monitors anymore.
The point is that the system does recognize the monitors and does not print any error message but the monitors stay black while the backlight is on. There is no image, just the backlight is on. These are two Philips monitors (242S), when I change one of the monitors to another Philips monitor (240B) I get a working display.
This is currently killing my system, has anyone an idea how I could solve this?
This is the Xorg.0.log:
[ 5.821]
X.Org X Server 1.21.1.10
X Protocol Version 11, Revision 0
[ 5.821] Current Operating System: Linux pc-dada-01-linux 6.6.11-2-lts #1 SMP PREEMPT_DYNAMIC Sat, 13 Jan 2024 19:03:39 +0000 x86_64
[ 5.821] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/lvm-root rw loglevel=3 quiet
[ 5.821]
[ 5.821] Current version of pixman: 0.43.0
[ 5.821] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.821] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.821] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 16 08:05:27 2024
[ 5.822] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.822] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.824] (==) ServerLayout "DefaultLayout"
[ 5.824] (==) No screen section available. Using defaults.
[ 5.824] (**) |-->Screen "Default Screen Section" (0)
[ 5.824] (**) | |-->Monitor "<default monitor>"
[ 5.824] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.824] (**) | |-->Device "Intel Graphics"
[ 5.824] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.824] (**) Option "BlankTime" "10"
[ 5.824] (**) Option "StandbyTime" "15"
[ 5.824] (**) Option "SuspendTime" "20"
[ 5.824] (**) Option "OffTime" "30"
[ 5.824] (==) Automatically adding devices
[ 5.824] (==) Automatically enabling devices
[ 5.824] (==) Automatically adding GPU devices
[ 5.824] (==) Automatically binding GPU devices
[ 5.824] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.824] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5.824] Entry deleted from font path.
[ 5.825] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.825] Entry deleted from font path.
[ 5.826] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 5.826] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.826] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.826] (II) Module ABI versions:
[ 5.826] X.Org ANSI C Emulation: 0.4
[ 5.826] X.Org Video Driver: 25.2
[ 5.826] X.Org XInput driver : 24.4
[ 5.826] X.Org Server Extension : 10.0
[ 5.826] (++) using VT number 7
[ 5.826] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.826] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.826] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 5.844] (--) PCI:*(0@0:2:0) 8086:4680:1028:0a9f rev 12, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 5.844] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5.844] (II) LoadModule: "glx"
[ 5.844] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.848] (II) Module glx: vendor="X.Org Foundation"
[ 5.848] compiled for 1.21.1.10, module version = 1.0.0
[ 5.848] ABI class: X.Org Server Extension, version 10.0
[ 5.848] (II) LoadModule: "modesetting"
[ 5.850] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.852] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.852] compiled for 1.21.1.10, module version = 1.21.1
[ 5.852] Module class: X.Org Video Driver
[ 5.852] ABI class: X.Org Video Driver, version 25.2
[ 5.852] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.878] (II) modeset(0): using drv /dev/dri/card1
[ 5.878] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.878] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.878] (==) modeset(0): RGB weight 888
[ 5.878] (==) modeset(0): Default visual is TrueColor
[ 5.878] (II) Loading sub module "glamoregl"
[ 5.878] (II) LoadModule: "glamoregl"
[ 5.878] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.882] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.882] compiled for 1.21.1.10, module version = 1.0.1
[ 5.882] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.962] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 770 (ADL-S GT1)
[ 5.962] (II) modeset(0): glamor initialized
[ 5.962] (==) modeset(0): VariableRefresh: disabled
[ 5.962] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 5.977] (II) modeset(0): Output DP-1 has no monitor section
[ 5.980] (II) modeset(0): Output HDMI-1 has no monitor section
[ 5.993] (II) modeset(0): Output DP-2 using monitor section DP-2
[ 5.993] (**) modeset(0): Option "RightOf" "DP-3"
[ 5.996] (II) modeset(0): Output HDMI-2 has no monitor section
[ 5.996] (II) modeset(0): Output DP-3 using monitor section DP-3
[ 5.996] (**) modeset(0): Option "Primary" "true"
[ 5.996] (II) modeset(0): Output HDMI-3 has no monitor section
[ 5.996] (II) modeset(0): EDID for output DP-3
[ 6.010] (II) modeset(0): EDID for output DP-1
[ 6.010] (II) modeset(0): Manufacturer: PHL Model: 944 Serial#: 38533
[ 6.010] (II) modeset(0): Year: 2021 Week: 20
[ 6.010] (II) modeset(0): EDID Version: 1.4
[ 6.010] (II) modeset(0): Digital Display Input
[ 6.010] (II) modeset(0): 8 bits per channel
[ 6.010] (II) modeset(0): Digital interface is DisplayPort
[ 6.010] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 6.010] (II) modeset(0): Gamma: 2.20
[ 6.010] (II) modeset(0): DPMS capabilities: Off
[ 6.010] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 6.010] (II) modeset(0): First detailed timing is preferred mode
[ 6.010] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 6.010] (II) modeset(0): Display is continuous-frequency
[ 6.010] (II) modeset(0): redX: 0.644 redY: 0.332 greenX: 0.307 greenY: 0.627
[ 6.010] (II) modeset(0): blueX: 0.150 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 6.010] (II) modeset(0): Supported established timings:
[ 6.010] (II) modeset(0): 720x400@70Hz
[ 6.010] (II) modeset(0): 640x480@60Hz
[ 6.010] (II) modeset(0): 640x480@67Hz
[ 6.010] (II) modeset(0): 640x480@72Hz
[ 6.010] (II) modeset(0): 640x480@75Hz
[ 6.010] (II) modeset(0): 800x600@56Hz
[ 6.010] (II) modeset(0): 800x600@60Hz
[ 6.010] (II) modeset(0): 800x600@72Hz
[ 6.010] (II) modeset(0): 800x600@75Hz
[ 6.010] (II) modeset(0): 832x624@75Hz
[ 6.010] (II) modeset(0): 1024x768@60Hz
[ 6.010] (II) modeset(0): 1024x768@70Hz
[ 6.010] (II) modeset(0): 1024x768@75Hz
[ 6.010] (II) modeset(0): 1280x1024@75Hz
[ 6.010] (II) modeset(0): Manufacturer's mask: 0
[ 6.010] (II) modeset(0): Supported standard timings:
[ 6.010] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.010] (II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 6.010] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 6.010] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.010] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.010] (II) modeset(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 6.011] (II) modeset(0): Supported detailed timing:
[ 6.011] (II) modeset(0): clock: 148.5 MHz Image Size: 527 x 296 mm
[ 6.011] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.011] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 6.011] (II) modeset(0): Serial No: UK02120038533
[ 6.011] (II) modeset(0): Monitor name: PHL 242S1
[ 6.011] (II) modeset(0): Ranges: V min: 48 V max: 75 Hz, H min: 85 H max: 85 kHz, PixClock max 185 MHz
[ 6.011] (II) modeset(0): Supported detailed timing:
[ 6.011] (II) modeset(0): clock: 174.5 MHz Image Size: 527 x 296 mm
[ 6.011] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 6.011] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1119 v_border: 0
[ 6.011] (II) modeset(0): Supported detailed timing:
[ 6.011] (II) modeset(0): clock: 74.2 MHz Image Size: 527 x 296 mm
[ 6.011] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 6.011] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.011] (II) modeset(0): Supported detailed timing:
[ 6.011] (II) modeset(0): clock: 27.0 MHz Image Size: 527 x 296 mm
[ 6.011] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 6.011] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 6.011] (II) modeset(0): Supported detailed timing:
[ 6.011] (II) modeset(0): clock: 27.0 MHz Image Size: 527 x 296 mm
[ 6.011] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 6.011] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 6.011] (II) modeset(0): Number of EDID sections to follow: 1
[ 6.011] (II) modeset(0): EDID (in hex):
[ 6.011] (II) modeset(0): 00ffffffffffff00410c440985960000
[ 6.011] (II) modeset(0): 141f0104a5351e783bca95a4554ea026
[ 6.011] (II) modeset(0): 0e5054bfef00d1c0b300950081808140
[ 6.011] (II) modeset(0): 81c001010101023a801871382d40582c
[ 6.011] (II) modeset(0): 45000f282100001e000000ff00554b30
[ 6.011] (II) modeset(0): 32313230303338353333000000fc0050
[ 6.011] (II) modeset(0): 484c2032343253310a202020000000fd
[ 6.011] (II) modeset(0): 00304b555512010a2020202020200149
[ 6.011] (II) modeset(0): 020318f14b901f051404130312021101
[ 6.011] (II) modeset(0): 23090707830100002a4480a070382740
[ 6.011] (II) modeset(0): 302035000f282100001a011d007251d0
[ 6.011] (II) modeset(0): 1e206e2855000f282100001e8c0ad08a
[ 6.011] (II) modeset(0): 20e02d10103e96000f28210000188c0a
[ 6.011] (II) modeset(0): d090204031200c4055000f2821000018
[ 6.011] (II) modeset(0): 00000000000000000000000000000000
[ 6.011] (II) modeset(0): 000000000000000000000000000000c4
[ 6.011] (II) modeset(0): Printing probed modes for output DP-1
[ 6.011] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.011] (II) modeset(0): Modeline "1920x1080"x75.0 174.50 1920 1968 2000 2080 1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[ 6.011] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.011] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 6.011] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.011] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.011] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.011] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.011] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.011] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.011] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.011] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.011] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.011] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 6.011] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.011] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.011] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.014] (II) modeset(0): EDID for output HDMI-1
[ 6.028] (II) modeset(0): EDID for output DP-2
[ 6.028] (II) modeset(0): Manufacturer: PHL Model: 944 Serial#: 38520
[ 6.028] (II) modeset(0): Year: 2021 Week: 20
[ 6.028] (II) modeset(0): EDID Version: 1.4
[ 6.028] (II) modeset(0): Digital Display Input
[ 6.028] (II) modeset(0): 8 bits per channel
[ 6.028] (II) modeset(0): Digital interface is DisplayPort
[ 6.028] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 6.028] (II) modeset(0): Gamma: 2.20
[ 6.028] (II) modeset(0): DPMS capabilities: Off
[ 6.028] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 6.028] (II) modeset(0): First detailed timing is preferred mode
[ 6.028] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 6.028] (II) modeset(0): Display is continuous-frequency
[ 6.028] (II) modeset(0): redX: 0.644 redY: 0.332 greenX: 0.307 greenY: 0.627
[ 6.028] (II) modeset(0): blueX: 0.150 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 6.028] (II) modeset(0): Supported established timings:
[ 6.028] (II) modeset(0): 720x400@70Hz
[ 6.028] (II) modeset(0): 640x480@60Hz
[ 6.028] (II) modeset(0): 640x480@67Hz
[ 6.028] (II) modeset(0): 640x480@72Hz
[ 6.028] (II) modeset(0): 640x480@75Hz
[ 6.028] (II) modeset(0): 800x600@56Hz
[ 6.028] (II) modeset(0): 800x600@60Hz
[ 6.028] (II) modeset(0): 800x600@72Hz
[ 6.028] (II) modeset(0): 800x600@75Hz
[ 6.028] (II) modeset(0): 832x624@75Hz
[ 6.028] (II) modeset(0): 1024x768@60Hz
[ 6.028] (II) modeset(0): 1024x768@70Hz
[ 6.028] (II) modeset(0): 1024x768@75Hz
[ 6.028] (II) modeset(0): 1280x1024@75Hz
[ 6.028] (II) modeset(0): Manufacturer's mask: 0
[ 6.028] (II) modeset(0): Supported standard timings:
[ 6.028] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.028] (II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 6.028] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 6.028] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.028] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.028] (II) modeset(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 6.028] (II) modeset(0): Supported detailed timing:
[ 6.028] (II) modeset(0): clock: 148.5 MHz Image Size: 527 x 296 mm
[ 6.028] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.028] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 6.028] (II) modeset(0): Serial No: UK02120038520
[ 6.028] (II) modeset(0): Monitor name: PHL 242S1
[ 6.028] (II) modeset(0): Ranges: V min: 48 V max: 75 Hz, H min: 85 H max: 85 kHz, PixClock max 185 MHz
[ 6.028] (II) modeset(0): Supported detailed timing:
[ 6.028] (II) modeset(0): clock: 174.5 MHz Image Size: 527 x 296 mm
[ 6.028] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 6.028] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1119 v_border: 0
[ 6.028] (II) modeset(0): Supported detailed timing:
[ 6.028] (II) modeset(0): clock: 74.2 MHz Image Size: 527 x 296 mm
[ 6.028] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 6.028] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.028] (II) modeset(0): Supported detailed timing:
[ 6.028] (II) modeset(0): clock: 27.0 MHz Image Size: 527 x 296 mm
[ 6.028] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 6.028] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 6.028] (II) modeset(0): Supported detailed timing:
[ 6.028] (II) modeset(0): clock: 27.0 MHz Image Size: 527 x 296 mm
[ 6.028] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 6.028] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 6.028] (II) modeset(0): Number of EDID sections to follow: 1
[ 6.028] (II) modeset(0): EDID (in hex):
[ 6.028] (II) modeset(0): 00ffffffffffff00410c440978960000
[ 6.028] (II) modeset(0): 141f0104a5351e783bca95a4554ea026
[ 6.028] (II) modeset(0): 0e5054bfef00d1c0b300950081808140
[ 6.028] (II) modeset(0): 81c001010101023a801871382d40582c
[ 6.028] (II) modeset(0): 45000f282100001e000000ff00554b30
[ 6.028] (II) modeset(0): 32313230303338353230000000fc0050
[ 6.028] (II) modeset(0): 484c2032343253310a202020000000fd
[ 6.028] (II) modeset(0): 00304b555512010a202020202020015a
[ 6.028] (II) modeset(0): 020318f14b901f051404130312021101
[ 6.028] (II) modeset(0): 23090707830100002a4480a070382740
[ 6.028] (II) modeset(0): 302035000f282100001a011d007251d0
[ 6.028] (II) modeset(0): 1e206e2855000f282100001e8c0ad08a
[ 6.028] (II) modeset(0): 20e02d10103e96000f28210000188c0a
[ 6.028] (II) modeset(0): d090204031200c4055000f2821000018
[ 6.028] (II) modeset(0): 00000000000000000000000000000000
[ 6.028] (II) modeset(0): 000000000000000000000000000000c4
[ 6.028] (II) modeset(0): Printing probed modes for output DP-2
[ 6.028] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.028] (II) modeset(0): Modeline "1920x1080"x75.0 174.50 1920 1968 2000 2080 1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[ 6.028] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.028] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 6.028] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.028] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.028] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.028] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.028] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.028] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.028] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.028] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.028] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.028] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 6.028] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.028] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.028] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.031] (II) modeset(0): EDID for output HDMI-2
[ 6.031] (II) modeset(0): EDID for output HDMI-3
[ 6.031] (II) modeset(0): Output DP-3 disconnected
[ 6.031] (II) modeset(0): Output DP-1 connected
[ 6.031] (II) modeset(0): Output HDMI-1 disconnected
[ 6.031] (II) modeset(0): Output DP-2 connected
[ 6.031] (II) modeset(0): Output HDMI-2 disconnected
[ 6.031] (II) modeset(0): Output HDMI-3 disconnected
[ 6.031] (II) modeset(0): Using user preference for initial modes
[ 6.031] (II) modeset(0): Output DP-1 using initial mode 1920x1080 +0+0
[ 6.031] (II) modeset(0): Output DP-2 using initial mode 1920x1080 +0+0
[ 6.031] (EE) modeset(0): Cannot position output DP-2 relative to output DP-3 without modes
[ 6.031] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.031] (==) modeset(0): DPI set to (96, 96)
[ 6.031] (II) Loading sub module "fb"
[ 6.031] (II) LoadModule: "fb"
[ 6.031] (II) Module "fb" already built-in
[ 6.092] (==) modeset(0): Backing store enabled
[ 6.092] (==) modeset(0): Silken mouse enabled
[ 6.312] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 6.312] (==) modeset(0): DPMS enabled
[ 6.312] (WW) modeset(0): Option "DRI" is not used
[ 6.312] (WW) modeset(0): Option "Backlight" is not used
[ 6.312] (II) modeset(0): [DRI2] Setup complete
[ 6.312] (II) modeset(0): [DRI2] DRI driver: iris
[ 6.312] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 6.312] (II) Initializing extension Generic Event Extension
[ 6.312] (II) Initializing extension SHAPE
[ 6.312] (II) Initializing extension MIT-SHM
[ 6.312] (II) Initializing extension XInputExtension
[ 6.312] (II) Initializing extension XTEST
[ 6.312] (II) Initializing extension BIG-REQUESTS
[ 6.312] (II) Initializing extension SYNC
[ 6.312] (II) Initializing extension XKEYBOARD
[ 6.312] (II) Initializing extension XC-MISC
[ 6.312] (II) Initializing extension SECURITY
[ 6.312] (II) Initializing extension XFIXES
[ 6.312] (II) Initializing extension RENDER
[ 6.312] (II) Initializing extension RANDR
[ 6.313] (II) Initializing extension COMPOSITE
[ 6.313] (II) Initializing extension DAMAGE
[ 6.313] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.313] (II) Initializing extension DOUBLE-BUFFER
[ 6.313] (II) Initializing extension RECORD
[ 6.313] (II) Initializing extension DPMS
[ 6.313] (II) Initializing extension Present
[ 6.313] (II) Initializing extension DRI3
[ 6.313] (II) Initializing extension X-Resource
[ 6.313] (II) Initializing extension XVideo
[ 6.313] (II) Initializing extension XVideo-MotionCompensation
[ 6.313] (II) Initializing extension GLX
[ 6.316] (II) AIGLX: Loaded and initialized iris
[ 6.316] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.316] (II) Initializing extension XFree86-VidModeExtension
[ 6.316] (II) Initializing extension XFree86-DGA
[ 6.316] (II) Initializing extension XFree86-DRI
[ 6.316] (II) Initializing extension DRI2
[ 6.317] (II) modeset(0): Damage tracking initialized
[ 6.317] (II) modeset(0): Setting screen physical size to 508 x 285
[ 6.384] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 6.384] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.384] (**) Video Bus: Applying InputClass "system-keyboard"
[ 6.384] (II) LoadModule: "libinput"
[ 6.384] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.386] (II) Module libinput: vendor="X.Org Foundation"
[ 6.386] compiled for 1.21.1.8, module version = 1.4.0
[ 6.386] Module class: X.Org XInput Driver
[ 6.386] ABI class: X.Org XInput driver, version 24.4
[ 6.386] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.386] (**) Video Bus: always reports core events
[ 6.386] (**) Option "Device" "/dev/input/event2"
[ 6.389] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 6.389] (II) event2 - Video Bus: device is a keyboard
[ 6.389] (II) event2 - Video Bus: device removed
[ 6.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 6.416] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.416] (**) Option "xkb_layout" "ch"
[ 6.429] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 6.429] (II) event2 - Video Bus: device is a keyboard
[ 6.429] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6.429] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.429] (**) Power Button: Applying InputClass "system-keyboard"
[ 6.429] (II) Using input driver 'libinput' for 'Power Button'
[ 6.429] (**) Power Button: always reports core events
[ 6.429] (**) Option "Device" "/dev/input/event0"
[ 6.429] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.429] (II) event0 - Power Button: device is a keyboard
[ 6.429] (II) event0 - Power Button: device removed
[ 6.480] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 6.480] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.480] (**) Option "xkb_layout" "ch"
[ 6.481] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.482] (II) event0 - Power Button: device is a keyboard
[ 6.482] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 6.482] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 6.482] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 6.482] (II) Using input driver 'libinput' for 'Sleep Button'
[ 6.482] (**) Sleep Button: always reports core events
[ 6.482] (**) Option "Device" "/dev/input/event1"
[ 6.482] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 6.482] (II) event1 - Sleep Button: device is a keyboard
[ 6.482] (II) event1 - Sleep Button: device removed
[ 6.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 6.510] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 6.510] (**) Option "xkb_layout" "ch"
[ 6.510] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 6.510] (II) event1 - Sleep Button: device is a keyboard
[ 6.511] (II) config/udev: Adding input device Jabra Evolve 65 (/dev/input/event7)
[ 6.511] (**) Jabra Evolve 65: Applying InputClass "libinput keyboard catchall"
[ 6.511] (**) Jabra Evolve 65: Applying InputClass "system-keyboard"
[ 6.511] (II) Using input driver 'libinput' for 'Jabra Evolve 65'
[ 6.511] (**) Jabra Evolve 65: always reports core events
[ 6.511] (**) Option "Device" "/dev/input/event7"
[ 6.511] (II) event7 - Jabra Evolve 65: is tagged by udev as: Keyboard
[ 6.511] (II) event7 - Jabra Evolve 65: device is a keyboard
[ 6.511] (II) event7 - Jabra Evolve 65: device removed
[ 6.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B0E:0311.0005/input/input8/event7"
[ 6.536] (II) XINPUT: Adding extended input device "Jabra Evolve 65" (type: KEYBOARD, id 9)
[ 6.536] (**) Option "xkb_layout" "ch"
[ 6.537] (II) event7 - Jabra Evolve 65: is tagged by udev as: Keyboard
[ 6.537] (II) event7 - Jabra Evolve 65: device is a keyboard
[ 6.537] (II) config/udev: Adding input device Jabra Link 370 (/dev/input/event3)
[ 6.537] (**) Jabra Link 370: Applying InputClass "libinput keyboard catchall"
[ 6.537] (**) Jabra Link 370: Applying InputClass "system-keyboard"
[ 6.537] (II) Using input driver 'libinput' for 'Jabra Link 370'
[ 6.537] (**) Jabra Link 370: always reports core events
[ 6.537] (**) Option "Device" "/dev/input/event3"
[ 6.538] (II) event3 - Jabra Link 370: is tagged by udev as: Keyboard
[ 6.538] (II) event3 - Jabra Link 370: device is a keyboard
[ 6.538] (II) event3 - Jabra Link 370: device removed
[ 6.556] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.3/0003:0B0E:245E.0001/input/input3/event3"
[ 6.556] (II) XINPUT: Adding extended input device "Jabra Link 370" (type: KEYBOARD, id 10)
[ 6.556] (**) Option "xkb_layout" "ch"
[ 6.557] (II) event3 - Jabra Link 370: is tagged by udev as: Keyboard
[ 6.557] (II) event3 - Jabra Link 370: device is a keyboard
[ 6.557] (II) config/udev: Adding input device Microsoft Microsoft Ergonomic Keyboard (/dev/input/event4)
[ 6.557] (**) Microsoft Microsoft Ergonomic Keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.557] (**) Microsoft Microsoft Ergonomic Keyboard: Applying InputClass "system-keyboard"
[ 6.557] (II) Using input driver 'libinput' for 'Microsoft Microsoft Ergonomic Keyboard'
[ 6.557] (**) Microsoft Microsoft Ergonomic Keyboard: always reports core events
[ 6.557] (**) Option "Device" "/dev/input/event4"
[ 6.559] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: is tagged by udev as: Keyboard
[ 6.559] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: device is a keyboard
[ 6.559] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: device removed
[ 6.600] (II) libinput: Microsoft Microsoft Ergonomic Keyboard: needs a virtual subdevice
[ 6.600] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input4/event4"
[ 6.600] (II) XINPUT: Adding extended input device "Microsoft Microsoft Ergonomic Keyboard" (type: MOUSE, id 11)
[ 6.600] (**) Option "AccelerationScheme" "none"
[ 6.600] (**) Microsoft Microsoft Ergonomic Keyboard: (accel) selected scheme none/0
[ 6.600] (**) Microsoft Microsoft Ergonomic Keyboard: (accel) acceleration factor: 2.000
[ 6.600] (**) Microsoft Microsoft Ergonomic Keyboard: (accel) acceleration threshold: 4
[ 6.600] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: is tagged by udev as: Keyboard
[ 6.600] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: device is a keyboard
[ 6.601] (II) config/udev: Adding input device Microsoft Microsoft Ergonomic Keyboard Mouse (/dev/input/event5)
[ 6.601] (**) Microsoft Microsoft Ergonomic Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[ 6.601] (II) Using input driver 'libinput' for 'Microsoft Microsoft Ergonomic Keyboard Mouse'
[ 6.601] (**) Microsoft Microsoft Ergonomic Keyboard Mouse: always reports core events
[ 6.601] (**) Option "Device" "/dev/input/event5"
[ 6.601] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: is tagged by udev as: Mouse
[ 6.601] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: device is a pointer
[ 6.601] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: device removed
[ 6.670] (II) libinput: Microsoft Microsoft Ergonomic Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.670] (II) libinput: Microsoft Microsoft Ergonomic Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.670] (II) libinput: Microsoft Microsoft Ergonomic Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.670] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input5/event5"
[ 6.670] (II) XINPUT: Adding extended input device "Microsoft Microsoft Ergonomic Keyboard Mouse" (type: MOUSE, id 12)
[ 6.670] (**) Option "AccelerationScheme" "none"
[ 6.670] (**) Microsoft Microsoft Ergonomic Keyboard Mouse: (accel) selected scheme none/0
[ 6.670] (**) Microsoft Microsoft Ergonomic Keyboard Mouse: (accel) acceleration factor: 2.000
[ 6.670] (**) Microsoft Microsoft Ergonomic Keyboard Mouse: (accel) acceleration threshold: 4
[ 6.670] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: is tagged by udev as: Mouse
[ 6.671] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: device is a pointer
[ 6.672] (II) config/udev: Adding input device Microsoft Microsoft Ergonomic Keyboard Mouse (/dev/input/mouse0)
[ 6.672] (II) No input driver specified, ignoring this device.
[ 6.672] (II) This device may have been added with another device file.
[ 6.672] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event6)
[ 6.672] (**) Logitech USB Laser Mouse: Applying InputClass "libinput pointer catchall"
[ 6.672] (II) Using input driver 'libinput' for 'Logitech USB Laser Mouse'
[ 6.672] (**) Logitech USB Laser Mouse: always reports core events
[ 6.672] (**) Option "Device" "/dev/input/event6"
[ 6.727] (II) event6 - Logitech USB Laser Mouse: is tagged by udev as: Mouse
[ 6.727] (II) event6 - Logitech USB Laser Mouse: device set to 1000 DPI
[ 6.727] (II) event6 - Logitech USB Laser Mouse: device is a pointer
[ 6.727] (II) event6 - Logitech USB Laser Mouse: device removed
[ 6.790] (II) libinput: Logitech USB Laser Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.790] (II) libinput: Logitech USB Laser Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.790] (II) libinput: Logitech USB Laser Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.791] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C069.0004/input/input7/event6"
[ 6.791] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 13)
[ 6.791] (**) Option "AccelerationScheme" "none"
[ 6.791] (**) Logitech USB Laser Mouse: (accel) selected scheme none/0
[ 6.791] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 6.791] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 6.847] (II) event6 - Logitech USB Laser Mouse: is tagged by udev as: Mouse
[ 6.847] (II) event6 - Logitech USB Laser Mouse: device set to 1000 DPI
[ 6.847] (II) event6 - Logitech USB Laser Mouse: device is a pointer
[ 6.847] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1)
[ 6.847] (II) No input driver specified, ignoring this device.
[ 6.847] (II) This device may have been added with another device file.
[ 6.848] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event12)
[ 6.848] (II) No input driver specified, ignoring this device.
[ 6.848] (II) This device may have been added with another device file.
[ 6.848] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 6.848] (II) No input driver specified, ignoring this device.
[ 6.848] (II) This device may have been added with another device file.
[ 6.848] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 6.848] (II) No input driver specified, ignoring this device.
[ 6.848] (II) This device may have been added with another device file.
[ 6.848] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 6.848] (II) No input driver specified, ignoring this device.
[ 6.848] (II) This device may have been added with another device file.
[ 6.849] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 6.849] (II) No input driver specified, ignoring this device.
[ 6.849] (II) This device may have been added with another device file.
[ 6.849] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[ 6.849] (II) No input driver specified, ignoring this device.
[ 6.849] (II) This device may have been added with another device file.
[ 6.849] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event9)
[ 6.849] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 6.849] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 6.849] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 6.849] (**) Intel HID 5 button array: always reports core events
[ 6.849] (**) Option "Device" "/dev/input/event9"
[ 6.849] (II) event9 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 6.849] (II) event9 - Intel HID 5 button array: device is a keyboard
[ 6.849] (II) event9 - Intel HID 5 button array: device removed
[ 6.873] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input10/event9"
[ 6.873] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 14)
[ 6.873] (**) Option "xkb_layout" "ch"
[ 6.873] (II) event9 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 6.873] (II) event9 - Intel HID 5 button array: device is a keyboard
[ 6.874] (II) config/udev: Adding input device Intel HID events (/dev/input/event8)
[ 6.874] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 6.874] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 6.874] (II) Using input driver 'libinput' for 'Intel HID events'
[ 6.874] (**) Intel HID events: always reports core events
[ 6.874] (**) Option "Device" "/dev/input/event8"
[ 6.874] (II) event8 - Intel HID events: is tagged by udev as: Keyboard
[ 6.874] (II) event8 - Intel HID events: device is a keyboard
[ 6.874] (II) event8 - Intel HID events: device removed
[ 6.913] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input9/event8"
[ 6.913] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 15)
[ 6.913] (**) Option "xkb_layout" "ch"
[ 6.913] (II) event8 - Intel HID events: is tagged by udev as: Keyboard
[ 6.913] (II) event8 - Intel HID events: device is a keyboard
[ 6.914] (II) config/udev: Adding input device Dell Privacy Driver (/dev/input/event10)
[ 6.914] (**) Dell Privacy Driver: Applying InputClass "libinput keyboard catchall"
[ 6.914] (**) Dell Privacy Driver: Applying InputClass "system-keyboard"
[ 6.914] (II) Using input driver 'libinput' for 'Dell Privacy Driver'
[ 6.914] (**) Dell Privacy Driver: always reports core events
[ 6.914] (**) Option "Device" "/dev/input/event10"
[ 6.914] (II) event10 - Dell Privacy Driver: is tagged by udev as: Keyboard
[ 6.914] (II) event10 - Dell Privacy Driver: device is a keyboard
[ 6.914] (II) event10 - Dell Privacy Driver: device removed
[ 6.936] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/6932965F-1671-4CEB-B988-D3AB0A901919/input/input11/event10"
[ 6.936] (II) XINPUT: Adding extended input device "Dell Privacy Driver" (type: KEYBOARD, id 16)
[ 6.936] (**) Option "xkb_layout" "ch"
[ 6.937] (II) event10 - Dell Privacy Driver: is tagged by udev as: Keyboard
[ 6.937] (II) event10 - Dell Privacy Driver: device is a keyboard
[ 6.937] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[ 6.937] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.937] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 6.937] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 6.937] (**) Dell WMI hotkeys: always reports core events
[ 6.937] (**) Option "Device" "/dev/input/event11"
[ 6.938] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 6.938] (II) event11 - Dell WMI hotkeys: device is a keyboard
[ 6.938] (II) event11 - Dell WMI hotkeys: device removed
[ 6.980] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12/event11"
[ 6.980] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[ 6.980] (**) Option "xkb_layout" "ch"
[ 6.980] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 6.980] (II) event11 - Dell WMI hotkeys: device is a keyboard
[ 6.995] (**) Microsoft Microsoft Ergonomic Keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.995] (**) Microsoft Microsoft Ergonomic Keyboard: Applying InputClass "system-keyboard"
[ 6.995] (II) Using input driver 'libinput' for 'Microsoft Microsoft Ergonomic Keyboard'
[ 6.995] (**) Microsoft Microsoft Ergonomic Keyboard: always reports core events
[ 6.995] (**) Option "Device" "/dev/input/event4"
[ 6.995] (II) libinput: Microsoft Microsoft Ergonomic Keyboard: is a virtual subdevice
[ 6.995] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input4/event4"
[ 6.995] (II) XINPUT: Adding extended input device "Microsoft Microsoft Ergonomic Keyboard" (type: KEYBOARD, id 18)
[ 6.995] (**) Option "xkb_layout" "ch"
[ 26.927] (II) event2 - Video Bus: device removed
[ 26.943] (II) event0 - Power Button: device removed
[ 26.960] (II) event1 - Sleep Button: device removed
[ 26.977] (II) event7 - Jabra Evolve 65: device removed
[ 26.993] (II) event3 - Jabra Link 370: device removed
[ 27.010] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: device removed
[ 27.050] (II) event6 - Logitech USB Laser Mouse: device removed
[ 27.090] (II) event9 - Intel HID 5 button array: device removed
[ 27.106] (II) event8 - Intel HID events: device removed
[ 27.124] (II) event10 - Dell Privacy Driver: device removed
[ 27.140] (II) event11 - Dell WMI hotkeys: device removed
[ 27.157] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: device removed
[ 27.173] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 31.454] (II) Open ACPI successful (/var/run/acpid.socket)
[ 31.454] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 31.519] (II) modeset(0): EDID vendor "PHL", prod id 2372
[ 31.519] (II) modeset(0): Using EDID range info for horizontal sync
[ 31.519] (II) modeset(0): Using EDID range info for vertical refresh
[ 31.519] (II) modeset(0): Printing DDC gathered Modelines:
[ 31.519] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 31.519] (II) modeset(0): Modeline "1920x1080"x0.0 174.50 1920 1968 2000 2080 1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[ 31.519] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 31.519] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 31.519] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 31.519] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 31.519] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 31.519] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 31.519] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 31.519] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 31.519] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 31.519] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 31.519] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 31.519] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 31.519] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 31.519] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 31.519] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 31.519] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 31.519] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 31.519] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 31.519] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 31.519] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 31.519] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 31.519] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 31.519] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 31.519] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 31.519] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 31.693] (II) modeset(0): EDID vendor "PHL", prod id 2372
[ 31.693] (II) modeset(0): Using hsync ranges from config file
[ 31.693] (II) modeset(0): Using vrefresh ranges from config file
[ 31.693] (II) modeset(0): Printing DDC gathered Modelines:
[ 31.693] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 31.693] (II) modeset(0): Modeline "1920x1080"x0.0 174.50 1920 1968 2000 2080 1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[ 31.693] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 31.693] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 31.693] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 31.694] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 31.694] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 31.694] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 31.694] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 31.694] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 31.694] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 31.694] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 31.694] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 31.694] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 31.694] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 31.694] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 31.694] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 31.694] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 31.694] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 31.694] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 31.694] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 31.694] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 31.694] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 31.694] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 31.694] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 31.694] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 31.694] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 31.729] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 31.729] (II) event2 - Video Bus: device is a keyboard
[ 31.730] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 31.730] (II) event0 - Power Button: device is a keyboard
[ 31.731] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 31.731] (II) event1 - Sleep Button: device is a keyboard
[ 31.732] (II) event7 - Jabra Evolve 65: is tagged by udev as: Keyboard
[ 31.732] (II) event7 - Jabra Evolve 65: device is a keyboard
[ 31.733] (II) event3 - Jabra Link 370: is tagged by udev as: Keyboard
[ 31.733] (II) event3 - Jabra Link 370: device is a keyboard
[ 31.734] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: is tagged by udev as: Keyboard
[ 31.734] (II) event4 - Microsoft Microsoft Ergonomic Keyboard: device is a keyboard
[ 31.735] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: is tagged by udev as: Mouse
[ 31.735] (II) event5 - Microsoft Microsoft Ergonomic Keyboard Mouse: device is a pointer
[ 31.792] (II) event6 - Logitech USB Laser Mouse: is tagged by udev as: Mouse
[ 31.792] (II) event6 - Logitech USB Laser Mouse: device set to 1000 DPI
[ 31.792] (II) event6 - Logitech USB Laser Mouse: device is a pointer
[ 31.794] (II) event9 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 31.794] (II) event9 - Intel HID 5 button array: device is a keyboard
[ 31.796] (II) event8 - Intel HID events: is tagged by udev as: Keyboard
[ 31.796] (II) event8 - Intel HID events: device is a keyboard
[ 31.798] (II) event10 - Dell Privacy Driver: is tagged by udev as: Keyboard
[ 31.798] (II) event10 - Dell Privacy Driver: device is a keyboard
[ 31.800] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 31.800] (II) event11 - Dell WMI hotkeys: device is a keyboard
[ 114.925] (II) modeset(0): EDID vendor "PHL", prod id 2372
[ 114.925] (II) modeset(0): Using hsync ranges from config file
[ 114.925] (II) modeset(0): Using vrefresh ranges from config file
[ 114.925] (II) modeset(0): Printing DDC gathered Modelines:
[ 114.925] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 114.925] (II) modeset(0): Modeline "1920x1080"x0.0 174.50 1920 1968 2000 2080 1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[ 114.925] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 114.925] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 114.925] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 114.925] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 114.925] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 114.925] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 114.925] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 114.925] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 114.925] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 114.925] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 114.925] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 114.925] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 114.925] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 114.925] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 114.925] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 114.925] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 114.925] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 114.925] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 114.925] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 114.925] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 114.925] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 114.925] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 114.925] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 114.925] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 114.925] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)dmesg:
[16. Jan 08:05] microcode: updated early: 0x2e -> 0x32, date = 2023-06-07
[ +0.000000] Linux version 6.6.11-2-lts (linux-lts@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Sat, 13 Jan 2024 19:03:39 +0000
[ +0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/lvm-root rw loglevel=3 quiet
[ +0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[ +0.000000] BIOS-provided physical RAM map:
[ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ +0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005cd1bfff] usable
[ +0.000000] BIOS-e820: [mem 0x000000005cd1c000-0x0000000060d10fff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000060d11000-0x0000000061571fff] ACPI NVS
[ +0.000000] BIOS-e820: [mem 0x0000000061572000-0x00000000617fefff] ACPI data
[ +0.000000] BIOS-e820: [mem 0x00000000617ff000-0x00000000617fffff] usable
[ +0.000000] BIOS-e820: [mem 0x0000000061800000-0x0000000065ffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000066400000-0x00000000665fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000066a00000-0x00000000703fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000f9000000-0x00000000f9ffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000088fbfffff] usable
[ +0.000000] NX (Execute Disable) protection: active
[ +0.000000] APIC: Static calls initialized
[ +0.000000] e820: update [mem 0x562c7018-0x562f9057] usable ==> usable
[ +0.000000] e820: update [mem 0x562c7018-0x562f9057] usable ==> usable
[ +0.000000] e820: update [mem 0x56294018-0x562c6057] usable ==> usable
[ +0.000000] e820: update [mem 0x56294018-0x562c6057] usable ==> usable
[ +0.000000] e820: update [mem 0x56261018-0x56293057] usable ==> usable
[ +0.000000] e820: update [mem 0x56261018-0x56293057] usable ==> usable
[ +0.000000] e820: update [mem 0x5622e018-0x56260057] usable ==> usable
[ +0.000000] e820: update [mem 0x5622e018-0x56260057] usable ==> usable
[ +0.000000] extended physical RAM map:
[ +0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ +0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005622e017] usable
[ +0.000000] reserve setup_data: [mem 0x000000005622e018-0x0000000056260057] usable
[ +0.000000] reserve setup_data: [mem 0x0000000056260058-0x0000000056261017] usable
[ +0.000000] reserve setup_data: [mem 0x0000000056261018-0x0000000056293057] usable
[ +0.000000] reserve setup_data: [mem 0x0000000056293058-0x0000000056294017] usable
[ +0.000000] reserve setup_data: [mem 0x0000000056294018-0x00000000562c6057] usable
[ +0.000000] reserve setup_data: [mem 0x00000000562c6058-0x00000000562c7017] usable
[ +0.000000] reserve setup_data: [mem 0x00000000562c7018-0x00000000562f9057] usable
[ +0.000000] reserve setup_data: [mem 0x00000000562f9058-0x000000005cd1bfff] usable
[ +0.000000] reserve setup_data: [mem 0x000000005cd1c000-0x0000000060d10fff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000060d11000-0x0000000061571fff] ACPI NVS
[ +0.000000] reserve setup_data: [mem 0x0000000061572000-0x00000000617fefff] ACPI data
[ +0.000000] reserve setup_data: [mem 0x00000000617ff000-0x00000000617fffff] usable
[ +0.000000] reserve setup_data: [mem 0x0000000061800000-0x0000000065ffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000066400000-0x00000000665fffff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000066a00000-0x00000000703fffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000f9000000-0x00000000f9ffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ +0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000088fbfffff] usable
[ +0.000000] efi: EFI v2.7 by Dell
[ +0.000000] efi: ACPI=0x617fe000 ACPI 2.0=0x617fe014 SMBIOS=0x5d5a5000 TPMFinalLog=0x6146b000 ESRT=0x5d53c818 MEMATTR=0x56fcb018 INITRD=0x56f91118 RNG=0x61715018 TPMEventLog=0x56f81018
[ +0.000000] random: crng init done
[ +0.000000] efi: Remove mem104: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[ +0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[ +0.000000] efi: Remove mem105: MMIO range=[0xf9000000-0xf9ffffff] (16MB) from e820 map
[ +0.000000] e820: remove [mem 0xf9000000-0xf9ffffff] reserved
[ +0.000000] efi: Remove mem107: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ +0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ +0.000000] SMBIOS 3.6 present.
[ +0.000000] DMI: Dell Inc. Precision 3660/0J1C3P, BIOS 2.9.3 11/22/2023
[ +0.000000] tsc: Detected 3200.000 MHz processor
[ +0.000000] tsc: Detected 3187.200 MHz TSC
[ +0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0.000002] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0.000004] last_pfn = 0x88fc00 max_arch_pfn = 0x400000000
[ +0.000004] total RAM covered: 63168M
[ +0.000059] Found optimal setting for mtrr clean up
[ +0.000000] gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 0G
[ +0.000002] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
[ +0.000002] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ +0.000436] e820: update [mem 0x6c000000-0xffffffff] usable ==> reserved
[ +0.000001] last_pfn = 0x61800 max_arch_pfn = 0x400000000
[ +0.003548] esrt: Reserving ESRT space from 0x000000005d53c818 to 0x000000005d53c8a0.
[ +0.000008] Using GB pages for direct mapping
[ +0.000000] Incomplete global flushes, disabling PCID
[ +0.000201] Secure boot disabled
[ +0.000001] RAMDISK: [mem 0x50730000-0x5207efff]
[ +0.000003] ACPI: Early table checksum verification disabled
[ +0.000004] ACPI: RSDP 0x00000000617FE014 000024 (v02 DELL )
[ +0.000003] ACPI: XSDT 0x000000006172C188 00013C (v01 DELL Dell Inc 00000002 01000013)
[ +0.000004] ACPI: FACP 0x00000000617EE000 000114 (v06 DELL Dell Inc 00000002 01000013)
[ +0.000003] ACPI: DSDT 0x000000006174E000 09C5DF (v02 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: FACS 0x000000006149B000 000040
[ +0.000001] ACPI: SSDT 0x00000000617FC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x00000000617FB000 000E11 (v02 DELL MTX_Dell 00000000 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x00000000617F5000 005C55 (v02 CpuRef CpuSsdt 00003000 INTL 20200717)
[ +0.000001] ACPI: SSDT 0x00000000617EF000 005225 (v02 DptfTb DptfTabl 00001000 INTL 20200717)
[ +0.000002] ACPI: HPET 0x00000000617ED000 000038 (v01 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: APIC 0x00000000617EC000 0001DC (v05 DELL Dell Inc 00000002 01000013)
[ +0.000001] ACPI: MCFG 0x00000000617EB000 00003C (v01 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: SSDT 0x0000000061749000 0047A2 (v02 DELL DellRtd3 00001000 INTL 20200717)
[ +0.000001] ACPI: SSDT 0x0000000061745000 003244 (v02 INTEL DTbtSsdt 00001000 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x0000000061742000 002CEC (v02 SaSsdt SaSsdt 00003000 INTL 20200717)
[ +0.000001] ACPI: SSDT 0x0000000061740000 0012A9 (v02 INTEL IgfxSsdt 00003000 INTL 20200717)
[ +0.000002] ACPI: NHLT 0x000000006173F000 00002D (v00 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: SSDT 0x000000006173D000 0010C0 (v02 DELL UsbCTabl 00001000 INTL 20200717)
[ +0.000001] ACPI: LPIT 0x000000006173C000 0000CC (v01 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: WSMT 0x000000006173B000 000028 (v01 DELL Dell Inc 00000002 01000013)
[ +0.000001] ACPI: SSDT 0x000000006173A000 000B44 (v02 DELL PtidDevc 00001000 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x0000000061730000 0092F4 (v02 DELL TbtTypeC 00000000 INTL 20200717)
[ +0.000001] ACPI: DBGP 0x000000006172F000 000034 (v01 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: DBG2 0x000000006172E000 000054 (v00 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: BOOT 0x000000006172D000 000028 (v01 DELL CBX3 00000002 01000013)
[ +0.000001] ACPI: MSDM 0x00000000617FD000 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ +0.000002] ACPI: SSDT 0x000000006172B000 00060E (v02 DELL Tpm2Tabl 00001000 INTL 20200717)
[ +0.000001] ACPI: TPM2 0x000000006172A000 00004C (v04 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: DMAR 0x0000000061729000 000088 (v01 INTEL Dell Inc 00000002 01000013)
[ +0.000001] ACPI: FPDT 0x0000000061728000 000034 (v01 DELL Dell Inc 00000002 01000013)
[ +0.000002] ACPI: SSDT 0x0000000061724000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x0000000061720000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717)
[ +0.000001] ACPI: SSDT 0x000000006171F000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x000000006171D000 001B26 (v02 DELL S1D3C 00001000 INTL 20200717)
[ +0.000001] ACPI: SSDT 0x000000006171B000 001AD0 (v02 DELL S4D3C 00001000 INTL 20200717)
[ +0.000002] ACPI: SSDT 0x0000000061719000 001AC3 (v02 DELL S2D3C 00001000 INTL 20200717)
[ +0.000002] ACPI: ASF! 0x0000000061718000 000074 (v32 DELL Dell Inc 00000002 01000013)
[ +0.000001] ACPI: PHAT 0x0000000061717000 000A63 (v01 DELL Dell Inc 00000005 MSFT 0100000D)
[ +0.000002] ACPI: BGRT 0x0000000061716000 000038 (v01 DELL Dell Inc 00000002 01000013)
[ +0.000001] ACPI: Reserving FACP table memory at [mem 0x617ee000-0x617ee113]
[ +0.000003] ACPI: Reserving DSDT table memory at [mem 0x6174e000-0x617ea5de]
[ +0.000004] ACPI: Reserving FACS table memory at [mem 0x6149b000-0x6149b03f]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x617fc000-0x617fc38b]
[ +0.000002] ACPI: Reserving SSDT table memory at [mem 0x617fb000-0x617fbe10]
[ +0.000002] ACPI: Reserving SSDT table memory at [mem 0x617f5000-0x617fac54]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x617ef000-0x617f4224]
[ +0.000002] ACPI: Reserving HPET table memory at [mem 0x617ed000-0x617ed037]
[ +0.000002] ACPI: Reserving APIC table memory at [mem 0x617ec000-0x617ec1db]
[ +0.000001] ACPI: Reserving MCFG table memory at [mem 0x617eb000-0x617eb03b]
[ +0.000002] ACPI: Reserving SSDT table memory at [mem 0x61749000-0x6174d7a1]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x61745000-0x61748243]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x61742000-0x61744ceb]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x61740000-0x617412a8]
[ +0.000000] ACPI: Reserving NHLT table memory at [mem 0x6173f000-0x6173f02c]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x6173d000-0x6173e0bf]
[ +0.000000] ACPI: Reserving LPIT table memory at [mem 0x6173c000-0x6173c0cb]
[ +0.000001] ACPI: Reserving WSMT table memory at [mem 0x6173b000-0x6173b027]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x6173a000-0x6173ab43]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x61730000-0x617392f3]
[ +0.000001] ACPI: Reserving DBGP table memory at [mem 0x6172f000-0x6172f033]
[ +0.000000] ACPI: Reserving DBG2 table memory at [mem 0x6172e000-0x6172e053]
[ +0.000001] ACPI: Reserving BOOT table memory at [mem 0x6172d000-0x6172d027]
[ +0.000000] ACPI: Reserving MSDM table memory at [mem 0x617fd000-0x617fd054]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x6172b000-0x6172b60d]
[ +0.000001] ACPI: Reserving TPM2 table memory at [mem 0x6172a000-0x6172a04b]
[ +0.000000] ACPI: Reserving DMAR table memory at [mem 0x61729000-0x61729087]
[ +0.000001] ACPI: Reserving FPDT table memory at [mem 0x61728000-0x61728033]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x61724000-0x61727ae9]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x61720000-0x617239d9]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x6171f000-0x6171f143]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x6171d000-0x6171eb25]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x6171b000-0x6171cacf]
[ +0.000000] ACPI: Reserving SSDT table memory at [mem 0x61719000-0x6171aac2]
[ +0.000001] ACPI: Reserving ASF! table memory at [mem 0x61718000-0x61718073]
[ +0.000000] ACPI: Reserving PHAT table memory at [mem 0x61717000-0x61717a62]
[ +0.000000] ACPI: Reserving BGRT table memory at [mem 0x61716000-0x61716037]
[ +0.000232] No NUMA configuration found
[ +0.000000] Faking a node at [mem 0x0000000000000000-0x000000088fbfffff]
[ +0.000002] NODE_DATA(0) allocated [mem 0x88fbfb000-0x88fbfffff]
[ +0.000020] Zone ranges:
[ +0.000001] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ +0.000001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ +0.000001] Normal [mem 0x0000000100000000-0x000000088fbfffff]
[ +0.000000] Device empty
[ +0.000001] Movable zone start for each node
[ +0.000000] Early memory node ranges
[ +0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ +0.000001] node 0: [mem 0x0000000000100000-0x000000005cd1bfff]
[ +0.000000] node 0: [mem 0x00000000617ff000-0x00000000617fffff]
[ +0.000001] node 0: [mem 0x0000000100000000-0x000000088fbfffff]
[ +0.000001] Initmem setup node 0 [mem 0x0000000000001000-0x000000088fbfffff]
[ +0.000002] On node 0, zone DMA: 1 pages in unavailable ranges
[ +0.000014] On node 0, zone DMA: 97 pages in unavailable ranges
[ +0.001400] On node 0, zone DMA32: 19171 pages in unavailable ranges
[ +0.032807] On node 0, zone Normal: 26624 pages in unavailable ranges
[ +0.000006] On node 0, zone Normal: 1024 pages in unavailable ranges
[ +0.000020] Reserving Intel graphics memory at [mem 0x6c800000-0x703fffff]
[ +0.001361] ACPI: PM-Timer IO Port: 0x1808
[ +0.000005] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ +0.000042] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ +0.000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ +0.000001] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ +0.000002] ACPI: Using ACPI (MADT) for SMP configuration information
[ +0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ +0.000006] e820: update [mem 0x56f9d000-0x56fb4fff] usable ==> reserved
[ +0.000006] TSC deadline timer available
[ +0.000000] smpboot: Allowing 24 CPUs, 0 hotplug CPUs
[ +0.000007] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x5622e000-0x5622efff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x56260000-0x56260fff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x56261000-0x56261fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x56293000-0x56293fff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x56294000-0x56294fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x562c6000-0x562c6fff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x562c7000-0x562c7fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x562f9000-0x562f9fff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x56f9d000-0x56fb4fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x5cd1c000-0x60d10fff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x60d11000-0x61571fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x61572000-0x617fefff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x61800000-0x65ffffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x66000000-0x663fffff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x66400000-0x665fffff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x66600000-0x669fffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x66a00000-0x703fffff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0x70400000-0xfed1ffff]
[ +0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
[ +0.000000] [mem 0x70400000-0xfed1ffff] available for PCI devices
[ +0.000001] Booting paravirtualized kernel on bare hardware
[ +0.000001] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ +0.003358] setup_percpu: NR_CPUS:320 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
[ +0.000602] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ +0.000004] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ +0.000001] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ +0.000004] pcpu-alloc: [0] 16 17 18 19 20 21 22 23
[ +0.000009] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/lvm-root rw loglevel=3 quiet
[ +0.000028] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
[ +0.000007] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ +0.000000] printk: log_buf_len total cpu_extra contributions: 94208 bytes
[ +0.000001] printk: log_buf_len min size: 131072 bytes
[ +0.000096] printk: log_buf_len: 262144 bytes
[ +0.000001] printk: early log buf free: 112672(85%)
[ +0.002135] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ +0.001084] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ +0.000109] Fallback order for Node 0: 0
[ +0.000002] Built 1 zonelists, mobility grouping on. Total pages: 8178936
[ +0.000001] Policy zone: Normal
[ +0.000157] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ +0.000006] software IO TLB: area num 32.
[ +0.045197] Memory: 32419036K/33235692K available (16384K kernel code, 2132K rwdata, 13072K rodata, 3416K init, 3832K bss, 816400K reserved, 0K cma-reserved)
[ +0.000156] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[ +0.000019] ftrace: allocating 48830 entries in 191 pages
[ +0.004320] ftrace: allocated 191 pages with 7 groups
[ +0.000425] Dynamic Preempt: voluntary
[ +0.000049] rcu: Preemptible hierarchical RCU implementation.
[ +0.000001] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=24.
[ +0.000001] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ +0.000000] Trampoline variant of Tasks RCU enabled.
[ +0.000001] Rude variant of Tasks RCU enabled.
[ +0.000000] Tracing variant of Tasks RCU enabled.
[ +0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ +0.000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[ +0.001211] NR_IRQS: 20736, nr_irqs: 2248, preallocated irqs: 16
[ +0.000285] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ +0.000234] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ +0.000027] Console: colour dummy device 80x25
[ +0.000002] printk: console [tty0] enabled
[ +0.000027] ACPI: Core revision 20230628
[ +0.000251] hpet: HPET dysfunctional in PC10. Force disabled.
[ +0.000000] APIC: Switch to symmetric I/O mode setup
[ +0.000001] DMAR: Host address width 39
[ +0.000001] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ +0.000003] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[ +0.000001] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ +0.000003] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[ +0.000001] DMAR: RMRR base: 0x0000006c000000 end: 0x000000703fffff
[ +0.000002] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ +0.000001] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ +0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ +0.001558] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ +0.000002] x2apic enabled
[ +0.000044] APIC: Switched APIC routing to: cluster x2apic
[ +0.004366] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2df10e7656b, max_idle_ns: 440795364873 ns
[ +0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6376.00 BogoMIPS (lpj=10624000)
[ +0.000040] x86/tme: not enabled by BIOS
[ +0.000005] CPU0: Thermal monitoring enabled (TM1)
[ +0.000001] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ +0.000096] process: using mwait in idle threads
[ +0.000002] CET detected: Indirect Branch Tracking enabled
[ +0.000001] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ +0.000001] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ +0.000002] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ +0.000001] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ +0.000000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ +0.000000] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ +0.000001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ +0.000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ +0.000008] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0.000001] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ +0.000001] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ +0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0.000001] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ +0.000001] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
[ +0.000000] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[ +0.003169] Freeing SMP alternatives memory: 40K
[ +0.000000] pid_max: default: 32768 minimum: 301
[ +0.000000] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ +0.000000] landlock: Up and running.
[ +0.000000] Yama: becoming mindful.
[ +0.000000] LSM support for eBPF active
[ +0.000000] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ +0.000000] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ +0.000000] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i9-12900K (family: 0x6, model: 0x97, stepping: 0x2)
[ +0.000000] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ +0.000000] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ +0.000000] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ +0.000000] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[ +0.000000] core: cpu_core PMU driver:
[ +0.000000] ... version: 5
[ +0.000000] ... bit width: 48
[ +0.000000] ... generic registers: 8
[ +0.000000] ... value mask: 0000ffffffffffff
[ +0.000000] ... max period: 00007fffffffffff
[ +0.000000] ... fixed-purpose events: 4
[ +0.000000] ... event mask: 0001000f000000ff
[ +0.000000] signal: max sigframe size: 3632
[ +0.000000] Estimated ratio of average max frequency by base frequency (times 1024): 1600
[ +0.000000] rcu: Hierarchical SRCU implementation.
[ +0.000000] rcu: Max phase no-delay instances is 1000.
[ +0.000000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ +0.000000] smp: Bringing up secondary CPUs ...
[ +0.000000] smpboot: x86: Booting SMP configuration:
[ +0.000000] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #14 #16 #17 #18 #19 #20 #21 #22 #23
[ -0.099787] core: cpu_atom PMU driver: PEBS-via-PT
[ +0.000000] ... version: 5
[ +0.000000] ... bit width: 48
[ +0.000000] ... generic registers: 6
[ +0.000000] ... value mask: 0000ffffffffffff
[ +0.000000] ... max period: 00007fffffffffff
[ +0.000000] ... fixed-purpose events: 3
[ +0.000000] ... event mask: 000000070000003f
[ +0.109843] #1 #3 #5 #7 #9 #11 #13 #15
[ +0.006640] smp: Brought up 1 node, 24 CPUs
[ +0.000000] smpboot: Max logical packages: 1
[ +0.000000] smpboot: Total of 24 processors activated (153046.00 BogoMIPS)
[ +0.004029] devtmpfs: initialized
[ +0.000000] x86/mm: Memory block size: 128MB
[ +0.000138] ACPI: PM: Registering ACPI NVS region [mem 0x60d11000-0x61571fff] (8785920 bytes)
[ +0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ +0.000000] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ +0.000000] pinctrl core: initialized pinctrl subsystem
[ +0.000000] PM: RTC time: 07:05:21, date: 2024-01-16
[ +0.000000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ +0.000089] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ +0.000253] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ +0.000256] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ +0.000007] audit: initializing netlink subsys (disabled)
[ +0.000002] audit: type=2000 audit(1705388721.023:1): state=initialized audit_enabled=0 res=1
[ +0.000000] thermal_sys: Registered thermal governor 'fair_share'
[ +0.000000] thermal_sys: Registered thermal governor 'bang_bang'
[ +0.000000] thermal_sys: Registered thermal governor 'step_wise'
[ +0.000000] thermal_sys: Registered thermal governor 'user_space'
[ +0.000000] thermal_sys: Registered thermal governor 'power_allocator'
[ +0.001874] cpuidle: using governor ladder
[ +0.000002] cpuidle: using governor menu
[ +0.000029] Simple Boot Flag at 0x47 set to 0x80
[ +0.000020] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ +0.000001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ +0.000085] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ +0.000004] PCI: not using MMCONFIG
[ +0.000001] PCI: Using configuration type 1 for base access
[ +0.000412] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ +0.000002] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ +0.000000] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ +0.000000] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ +0.000000] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ +0.000000] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ +0.000000] ACPI: Added _OSI(Module Device)
[ +0.000000] ACPI: Added _OSI(Processor Device)
[ +0.000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ +0.000000] ACPI: Added _OSI(Processor Aggregator Device)
[ +0.082323] ACPI: 19 ACPI AML tables successfully acquired and loaded
[ +0.015105] ACPI: Dynamic OEM Table Load:
[ +0.000007] ACPI: SSDT 0xFFFF888101412000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717)
[ +0.000701] ACPI: Dynamic OEM Table Load:
[ +0.000004] ACPI: SSDT 0xFFFF88810140A800 000647 (v02 PmRef Cpu0Ist 00003000 INTL 20200717)
[ +0.000545] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFF8881033E6800 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717)
[ +0.000000] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFF888101409800 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717)
[ +0.000000] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFF888101406000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717)
[ +0.000000] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFF888101404000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717)
[ +0.000748] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFF888101402000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717)
[ +0.000000] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFF88810141B000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717)
[ +0.007010] ACPI: _OSC evaluated successfully for all CPUs
[ +0.000071] ACPI: EC: EC started
[ +0.000000] ACPI: EC: interrupt blocked
[ +0.001584] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ +0.000001] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ +0.000001] ACPI: Interpreter enabled
[ +0.000037] ACPI: PM: (supports S0 S4 S5)
[ +0.000001] ACPI: Using IOAPIC for interrupt routing
[ +0.000829] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ +0.000991] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[ +0.000009] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ +0.000000] PCI: Ignoring E820 reservations for host bridge windows
[ +0.000823] ACPI: Enabled 9 GPEs in block 00 to 7F
[ +0.001960] ACPI: \_SB_.PC00.PEG1.PXP_: New power resource
[ +0.008376] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[ +0.001384] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
[ +0.156569] ACPI: \_SB_.PC00.RP25.PXP_: New power resource
[ +0.157836] ACPI: \PIN_: New power resource
[ +0.000199] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ +0.000003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ +0.003100] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ +0.000001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.006208] PCI host bridge to bus 0000:00
[ +0.000000] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ +0.000002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ +0.000000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0x70400000-0xbfffffff window]
[ +0.000000] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ +0.000001] pci_bus 0000:00: root bus resource [bus 00-fe]
[ +0.000050] pci 0000:00:00.0: [8086:4660] type 00 class 0x060000
[ +0.000089] pci 0000:00:02.0: [8086:4680] type 00 class 0x030000
[ +0.000005] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[ +0.000004] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ +0.000003] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ +0.000009] pci 0000:00:02.0: BAR 2: assigned to efifb
[ +0.000001] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ +0.000001] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ +0.000017] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[ +0.000001] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[ +0.000002] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[ +0.000001] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[ +0.000076] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000
[ +0.000011] pci 0000:00:04.0: reg 0x10: [mem 0x6001200000-0x600121ffff 64bit]
[ +0.000184] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400
[ +0.000053] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ +0.000021] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[ +0.000371] pci 0000:00:08.0: [8086:464f] type 00 class 0x088000
[ +0.000006] pci 0000:00:08.0: reg 0x10: [mem 0x600123c000-0x600123cfff 64bit]
[ +0.000102] pci 0000:00:14.0: [8086:7ae0] type 00 class 0x0c0330
[ +0.000017] pci 0000:00:14.0: reg 0x10: [mem 0x6001220000-0x600122ffff 64bit]
[ +0.000067] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ +0.000302] pci 0000:00:14.2: [8086:7aa7] type 00 class 0x050000
[ +0.000018] pci 0000:00:14.2: reg 0x10: [mem 0x6001234000-0x6001237fff 64bit]
[ +0.000011] pci 0000:00:14.2: reg 0x18: [mem 0x600123b000-0x600123bfff 64bit]
[ +0.000185] pci 0000:00:15.0: [8086:7acc] type 00 class 0x0c8000
[ +0.000027] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ +0.000252] pci 0000:00:16.0: [8086:7ae8] type 00 class 0x078000
[ +0.000020] pci 0000:00:16.0: reg 0x10: [mem 0x6001239000-0x6001239fff 64bit]
[ +0.000072] pci 0000:00:16.0: PME# supported from D3hot
[ +0.000174] pci 0000:00:16.3: [8086:7aeb] type 00 class 0x070002
[ +0.000010] pci 0000:00:16.3: reg 0x10: [io 0x4088-0x408f]
[ +0.000006] pci 0000:00:16.3: reg 0x14: [mem 0x70865000-0x70865fff]
[ +0.000096] pci 0000:00:17.0: [8086:7ae2] type 00 class 0x010601
[ +0.000012] pci 0000:00:17.0: reg 0x10: [mem 0x70860000-0x70861fff]
[ +0.000007] pci 0000:00:17.0: reg 0x14: [mem 0x70864000-0x708640ff]
[ +0.000007] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087]
[ +0.000007] pci 0000:00:17.0: reg 0x1c: [io 0x4090-0x4093]
[ +0.000007] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ +0.000007] pci 0000:00:17.0: reg 0x24: [mem 0x70863000-0x708637ff]
[ +0.000036] pci 0000:00:17.0: PME# supported from D3hot
[ +0.000184] pci 0000:00:1a.0: [8086:7ac8] type 01 class 0x060400
[ +0.000101] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ +0.000041] pci 0000:00:1a.0: PTM enabled (root), 4ns granularity
[ +0.000437] pci 0000:00:1b.0: [8086:7ac4] type 01 class 0x060400
[ +0.000135] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ +0.000046] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
[ +0.000472] pci 0000:00:1c.0: [8086:7ab9] type 01 class 0x060400
[ +0.000095] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ +0.000039] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ +0.000384] pci 0000:00:1c.4: [8086:7abc] type 01 class 0x060400
[ +0.000093] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ +0.000035] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[ +0.000356] pci 0000:00:1f.0: [8086:7a88] type 00 class 0x060100
[ +0.000245] pci 0000:00:1f.3: [8086:7ad0] type 00 class 0x040300
[ +0.000040] pci 0000:00:1f.3: reg 0x10: [mem 0x6001230000-0x6001233fff 64bit]
[ +0.000053] pci 0000:00:1f.3: reg 0x20: [mem 0x6001100000-0x60011fffff 64bit]
[ +0.000100] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ +0.000077] pci 0000:00:1f.4: [8086:7aa3] type 00 class 0x0c0500
[ +0.000020] pci 0000:00:1f.4: reg 0x10: [mem 0x6001238000-0x60012380ff 64bit]
[ +0.000021] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ +0.000144] pci 0000:00:1f.5: [8086:7aa4] type 00 class 0x0c8000
[ +0.000017] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ +0.000105] pci 0000:00:1f.6: [8086:1a1c] type 00 class 0x020000
[ +0.000028] pci 0000:00:1f.6: reg 0x10: [mem 0x70840000-0x7085ffff]
[ +0.000143] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ +0.000601] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
[ +0.000014] pci 0000:01:00.0: reg 0x10: [mem 0x70700000-0x70703fff 64bit]
[ +0.000194] pci 0000:00:06.0: PCI bridge to [bus 01]
[ +0.000002] pci 0000:00:06.0: bridge window [mem 0x70700000-0x707fffff]
[ +0.000070] pci 0000:02:00.0: [14e4:1657] type 00 class 0x020000
[ +0.000026] pci 0000:02:00.0: reg 0x10: [mem 0x60010b0000-0x60010bffff 64bit pref]
[ +0.000017] pci 0000:02:00.0: reg 0x18: [mem 0x60010a0000-0x60010affff 64bit pref]
[ +0.000017] pci 0000:02:00.0: reg 0x20: [mem 0x6001090000-0x600109ffff 64bit pref]
[ +0.000011] pci 0000:02:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ +0.000106] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ +0.000172] pci 0000:02:00.1: [14e4:1657] type 00 class 0x020000
[ +0.000026] pci 0000:02:00.1: reg 0x10: [mem 0x6001080000-0x600108ffff 64bit pref]
[ +0.000017] pci 0000:02:00.1: reg 0x18: [mem 0x6001070000-0x600107ffff 64bit pref]
[ +0.000017] pci 0000:02:00.1: reg 0x20: [mem 0x6001060000-0x600106ffff 64bit pref]
[ +0.000011] pci 0000:02:00.1: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ +0.000104] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ +0.000141] pci 0000:02:00.2: [14e4:1657] type 00 class 0x020000
[ +0.000023] pci 0000:02:00.2: reg 0x10: [mem 0x6001050000-0x600105ffff 64bit pref]
[ +0.000014] pci 0000:02:00.2: reg 0x18: [mem 0x6001040000-0x600104ffff 64bit pref]
[ +0.000014] pci 0000:02:00.2: reg 0x20: [mem 0x6001030000-0x600103ffff 64bit pref]
[ +0.000008] pci 0000:02:00.2: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ +0.000104] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ +0.000138] pci 0000:02:00.3: [14e4:1657] type 00 class 0x020000
[ +0.000023] pci 0000:02:00.3: reg 0x10: [mem 0x6001020000-0x600102ffff 64bit pref]
[ +0.000014] pci 0000:02:00.3: reg 0x18: [mem 0x6001010000-0x600101ffff 64bit pref]
[ +0.000014] pci 0000:02:00.3: reg 0x20: [mem 0x6001000000-0x600100ffff 64bit pref]
[ +0.000008] pci 0000:02:00.3: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ +0.000105] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ +0.000138] pci 0000:00:1a.0: PCI bridge to [bus 02]
[ +0.000007] pci 0000:00:1a.0: bridge window [mem 0x6001000000-0x60010fffff 64bit pref]
[ +0.000252] pci 0000:03:00.0: [1c5c:1959] type 00 class 0x010802
[ +0.000020] pci 0000:03:00.0: reg 0x10: [mem 0x70600000-0x70603fff 64bit]
[ +0.000309] pci 0000:00:1b.0: PCI bridge to [bus 03]
[ +0.000004] pci 0000:00:1b.0: bridge window [mem 0x70600000-0x706fffff]
[ +0.000055] pci 0000:04:00.0: [10ec:525a] type 00 class 0xff0000
[ +0.000025] pci 0000:04:00.0: reg 0x14: [mem 0x70500000-0x70500fff]
[ +0.000125] pci 0000:04:00.0: supports D1 D2
[ +0.000001] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ +0.000190] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ +0.000003] pci 0000:00:1c.0: bridge window [mem 0x70500000-0x705fffff]
[ +0.000069] pci 0000:05:00.0: [9710:9901] type 00 class 0x070002
[ +0.000028] pci 0000:05:00.0: reg 0x10: [io 0x3018-0x301f]
[ +0.000015] pci 0000:05:00.0: reg 0x14: [mem 0x70407000-0x70407fff]
[ +0.000045] pci 0000:05:00.0: reg 0x20: [mem 0x70406000-0x70406fff]
[ +0.000115] pci 0000:05:00.0: supports D1 D2
[ +0.000000] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000126] pci 0000:05:00.1: [9710:9901] type 00 class 0x070002
[ +0.000028] pci 0000:05:00.1: reg 0x10: [io 0x3010-0x3017]
[ +0.000015] pci 0000:05:00.1: reg 0x14: [mem 0x70405000-0x70405fff]
[ +0.000045] pci 0000:05:00.1: reg 0x20: [mem 0x70404000-0x70404fff]
[ +0.000114] pci 0000:05:00.1: supports D1 D2
[ +0.000001] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000096] pci 0000:05:00.2: [9710:9901] type 00 class 0x070002
[ +0.000024] pci 0000:05:00.2: reg 0x10: [io 0x3008-0x300f]
[ +0.000011] pci 0000:05:00.2: reg 0x14: [mem 0x70403000-0x70403fff]
[ +0.000032] pci 0000:05:00.2: reg 0x20: [mem 0x70402000-0x70402fff]
[ +0.000107] pci 0000:05:00.2: supports D1 D2
[ +0.000000] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000097] pci 0000:05:00.3: [9710:9901] type 00 class 0x070002
[ +0.000024] pci 0000:05:00.3: reg 0x10: [io 0x3000-0x3007]
[ +0.000011] pci 0000:05:00.3: reg 0x14: [mem 0x70401000-0x70401fff]
[ +0.000032] pci 0000:05:00.3: reg 0x20: [mem 0x70400000-0x70400fff]
[ +0.000106] pci 0000:05:00.3: supports D1 D2
[ +0.000001] pci 0000:05:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000110] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ +0.000002] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ +0.000003] pci 0000:00:1c.4: bridge window [mem 0x70400000-0x704fffff]
[ +0.392444] Low-power S0 idle used by default for system suspend
[ +0.000404] ACPI: EC: interrupt unblocked
[ +0.000000] ACPI: EC: event unblocked
[ +0.000000] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ +0.000000] ACPI: EC: GPE=0x6e
[ +0.000000] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC initialization complete
[ +0.000000] ACPI: \_SB_.PC00.LPCB.ECDV: EC: Used to handle transactions and events
[ +0.003363] iommu: Default domain type: Translated
[ +0.000000] iommu: DMA domain TLB invalidation policy: lazy mode
[ +0.000088] SCSI subsystem initialized
[ +0.000007] libata version 3.00 loaded.
[ +0.000000] ACPI: bus type USB registered
[ +0.000000] usbcore: registered new interface driver usbfs
[ +0.000000] usbcore: registered new interface driver hub
[ +0.000000] usbcore: registered new device driver usb
[ +0.000000] pps_core: LinuxPPS API ver. 1 registered
[ +0.000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ +0.000000] PTP clock support registered
[ +0.000000] EDAC MC: Ver: 3.0.0
[ +0.004305] efivars: Registered efivars operations
[ +0.000000] NetLabel: Initializing
[ +0.000000] NetLabel: domain hash size = 128
[ +0.000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0.000000] NetLabel: unlabeled traffic allowed by default
[ +0.000000] mctp: management component transport protocol core
[ +0.000000] NET: Registered PF_MCTP protocol family
[ +0.000000] PCI: Using ACPI for IRQ routing
[ +0.019673] PCI: pci_cache_line_size set to 64 bytes
[ +0.000865] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ +0.000868] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x5622e018-0x57ffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x56261018-0x57ffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x56294018-0x57ffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x562c7018-0x57ffffff]
[ +0.000000] e820: reserve RAM buffer [mem 0x56f9d000-0x57ffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x5cd1c000-0x5fffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x61800000-0x63ffffff]
[ +0.000000] e820: reserve RAM buffer [mem 0x88fc00000-0x88fffffff]
[ +0.000869] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ +0.000000] pci 0000:00:02.0: vgaarb: bridge control possible
[ +0.000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ +0.000000] vgaarb: loaded
[ +0.003312] clocksource: Switched to clocksource tsc-early
[ +0.000828] VFS: Disk quotas dquot_6.6.0
[ +0.000009] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ +0.000049] pnp: PnP ACPI init
[ +0.000169] system 00:00: [io 0x0680-0x069f] has been reserved
[ +0.000002] system 00:00: [io 0x164e-0x164f] has been reserved
[ +0.000095] system 00:02: [io 0x1854-0x1857] has been reserved
[ +0.000833] pnp 00:03: [dma 0 disabled]
[ +0.001513] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ +0.000022] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ +0.000002] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ +0.000001] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ +0.000001] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ +0.000004] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ +0.000001] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ +0.000001] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[ +0.000492] system 00:05: [io 0x2000-0x20fe] has been reserved
[ +0.002450] pnp: PnP ACPI: found 7 devices
[ +0.005327] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ +0.000032] NET: Registered PF_INET protocol family
[ +0.000159] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ +0.001280] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ +0.000024] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ +0.000145] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ +0.000228] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ +0.000082] TCP: Hash tables configured (established 262144 bind 65536)
[ +0.000105] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ +0.000061] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ +0.000053] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ +0.000041] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ +0.000004] NET: Registered PF_XDP protocol family
[ +0.000003] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ +0.000002] pci 0000:02:00.1: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ +0.000001] pci 0000:02:00.2: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ +0.000000] pci 0000:02:00.3: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ +0.000008] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[ +0.000002] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[ +0.000001] pci 0000:00:1a.0: BAR 14: assigned [mem 0x70900000-0x709fffff]
[ +0.000001] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[ +0.000055] pci 0000:00:1f.5: BAR 0: assigned [mem 0x70800000-0x70800fff]
[ +0.000010] pci 0000:00:06.0: PCI bridge to [bus 01]
[ +0.000005] pci 0000:00:06.0: bridge window [mem 0x70700000-0x707fffff]
[ +0.000005] pci 0000:02:00.0: BAR 6: assigned [mem 0x70900000-0x7093ffff pref]
[ +0.000000] pci 0000:02:00.1: BAR 6: assigned [mem 0x70940000-0x7097ffff pref]
[ +0.000001] pci 0000:02:00.2: BAR 6: assigned [mem 0x70980000-0x709bffff pref]
[ +0.000001] pci 0000:02:00.3: BAR 6: assigned [mem 0x709c0000-0x709fffff pref]
[ +0.000000] pci 0000:00:1a.0: PCI bridge to [bus 02]
[ +0.000015] pci 0000:00:1a.0: bridge window [mem 0x70900000-0x709fffff]
[ +0.000002] pci 0000:00:1a.0: bridge window [mem 0x6001000000-0x60010fffff 64bit pref]
[ +0.000004] pci 0000:00:1b.0: PCI bridge to [bus 03]
[ +0.000003] pci 0000:00:1b.0: bridge window [mem 0x70600000-0x706fffff]
[ +0.000006] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ +0.000003] pci 0000:00:1c.0: bridge window [mem 0x70500000-0x705fffff]
[ +0.000006] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ +0.000002] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ +0.000003] pci 0000:00:1c.4: bridge window [mem 0x70400000-0x704fffff]
[ +0.000006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ +0.000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ +0.000000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ +0.000001] pci_bus 0000:00: resource 7 [mem 0x70400000-0xbfffffff window]
[ +0.000000] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ +0.000001] pci_bus 0000:01: resource 1 [mem 0x70700000-0x707fffff]
[ +0.000001] pci_bus 0000:02: resource 1 [mem 0x70900000-0x709fffff]
[ +0.000000] pci_bus 0000:02: resource 2 [mem 0x6001000000-0x60010fffff 64bit pref]
[ +0.000001] pci_bus 0000:03: resource 1 [mem 0x70600000-0x706fffff]
[ +0.000000] pci_bus 0000:04: resource 1 [mem 0x70500000-0x705fffff]
[ +0.000001] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ +0.000000] pci_bus 0000:05: resource 1 [mem 0x70400000-0x704fffff]
[ +0.001155] PCI: CLS 0 bytes, default 64
[ +0.000015] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ +0.000001] software IO TLB: mapped [mem 0x000000004c730000-0x0000000050730000] (64MB)
[ +0.000017] Trying to unpack rootfs image as initramfs...
[ +0.000004] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2df10e7656b, max_idle_ns: 440795364873 ns
[ +0.000112] clocksource: Switched to clocksource tsc
[ +0.009755] Initialise system trusted keyrings
[ +0.000008] Key type blacklist registered
[ +0.000034] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ +0.000006] zbud: loaded
[ +0.000110] integrity: Platform Keyring initialized
[ +0.000003] integrity: Machine keyring initialized
[ +0.005711] Key type asymmetric registered
[ +0.000001] Asymmetric key parser 'x509' registered
[ +0.000009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ +0.000038] io scheduler mq-deadline registered
[ +0.000001] io scheduler kyber registered
[ +0.000005] io scheduler bfq registered
[ +0.002105] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
[ +0.000043] pcieport 0000:00:06.0: AER: enabled with IRQ 122
[ +0.000190] pcieport 0000:00:1a.0: PME: Signaling with IRQ 123
[ +0.000051] pcieport 0000:00:1a.0: AER: enabled with IRQ 123
[ +0.000223] pcieport 0000:00:1b.0: PME: Signaling with IRQ 124
[ +0.000045] pcieport 0000:00:1b.0: AER: enabled with IRQ 124
[ +0.000216] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[ +0.000052] pcieport 0000:00:1c.0: AER: enabled with IRQ 125
[ +0.000191] pcieport 0000:00:1c.4: PME: Signaling with IRQ 126
[ +0.000051] pcieport 0000:00:1c.4: AER: enabled with IRQ 126
[ +0.000090] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ +0.000894] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ +0.000029] ACPI: button: Power Button [PBTN]
[ +0.000016] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ +0.000010] ACPI: button: Sleep Button [SBTN]
[ +0.003884] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ +0.000681] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ +0.003270] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ +0.000751] 0000:00:16.3: ttyS4 at I/O 0x4088 (irq = 19, base_baud = 115200) is a 16550A
[ +0.000832] 0000:05:00.0: ttyS5 at I/O 0x3018 (irq = 16, base_baud = 115200) is a 16550A
[ +0.003060] 0000:05:00.1: ttyS6 at I/O 0x3010 (irq = 17, base_baud = 115200) is a 16550A
[ +0.000050] serial 0000:05:00.2: enabling device (0000 -> 0003)
[ +0.000785] 0000:05:00.2: ttyS7 at I/O 0x3008 (irq = 18, base_baud = 115200) is a 16550A
[ +0.000062] serial 0000:05:00.3: enabling device (0000 -> 0003)
[ +0.000774] 0000:05:00.3: ttyS8 at I/O 0x3000 (irq = 19, base_baud = 115200) is a 16550A
[ +0.000120] hpet_acpi_add: no address or irqs in _CRS
[ +0.000029] Non-volatile memory driver v1.3
[ +0.000001] Linux agpgart interface v0.103
[ +0.006874] tpm_tis NTC0702:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ +0.002567] Freeing initrd memory: 25916K
[ +0.011336] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ +0.000327] ACPI: bus type drm_connector registered
[ +0.000219] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ +0.000674] fbcon: Deferring console take-over
[ +0.000001] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ +0.001624] ahci 0000:00:17.0: version 3.0
[ +0.010331] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x3f impl SATA mode
[ +0.000010] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds
[ +0.050717] scsi host0: ahci
[ +0.000341] scsi host1: ahci
[ +0.000181] scsi host2: ahci
[ +0.000127] scsi host3: ahci
[ +0.000064] scsi host4: ahci
[ +0.000036] scsi host5: ahci
[ +0.000031] scsi host6: ahci
[ +0.000035] scsi host7: ahci
[ +0.000017] ata1: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863100 irq 127
[ +0.000001] ata2: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863180 irq 127
[ +0.000002] ata3: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863200 irq 127
[ +0.000001] ata4: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863280 irq 127
[ +0.000001] ata5: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863300 irq 127
[ +0.000002] ata6: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863380 irq 127
[ +0.000000] ata7: DUMMY
[ +0.000000] ata8: DUMMY
[ +0.000058] usbcore: registered new interface driver usbserial_generic
[ +0.000002] usbserial: USB Serial support registered for generic
[ +0.000138] rtc_cmos 00:01: RTC can wake from S4
[ +0.000906] rtc_cmos 00:01: registered as rtc0
[ +0.000178] rtc_cmos 00:01: setting system clock to 2024-01-16T07:05:22 UTC (1705388722)
[ +0.000029] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ +0.001131] intel_pstate: Intel P-state driver initializing
[ +0.002346] intel_pstate: HWP enabled
[ +0.000379] ledtrig-cpu: registered to indicate activity on CPUs
[ +0.000416] hid: raw HID events driver (C) Jiri Kosina
[ +0.000118] intel_pmc_core INT33A1:00: initialized
[ +0.000184] drop_monitor: Initializing network drop monitor service
[ +0.018912] Initializing XFRM netlink socket
[ +0.000027] NET: Registered PF_INET6 protocol family
[ +0.007782] Segment Routing with IPv6
[ +0.000002] RPL Segment Routing with IPv6
[ +0.000007] In-situ OAM (IOAM) with IPv6
[ +0.000030] NET: Registered PF_PACKET protocol family
[ +0.004510] microcode: Microcode Update Driver: v2.2.
[ +0.000009] IPI shorthand broadcast: enabled
[ +0.002637] sched_clock: Marking stable (1183336404, 6352599)->(1210952563, -21263560)
[ +0.000564] registered taskstats version 1
[ +0.002571] Loading compiled-in X.509 certificates
[ +0.003849] Loaded X.509 cert 'Build time autogenerated kernel key: 3198123a5db87438cd5e8251b4ced454aa0db865'
[ +0.004594] zswap: loaded using pool zstd/zsmalloc
[ +0.001239] Key type .fscrypt registered
[ +0.000001] Key type fscrypt-provisioning registered
[ +0.000159] integrity: Loading X.509 certificate: UEFI:db
[ +0.000012] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487'
[ +0.000001] integrity: Loading X.509 certificate: UEFI:db
[ +0.000006] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd'
[ +0.000000] integrity: Loading X.509 certificate: UEFI:db
[ +0.000008] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ +0.000001] integrity: Loading X.509 certificate: UEFI:db
[ +0.000008] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ +0.000650] PM: Magic number: 8:424:66
[ +0.000076] memory memory227: hash matches
[ +0.000012] memory memory94: hash matches
[ +0.002068] RAS: Correctable Errors collector initialized.
[ +0.000040] clk: Disabling unused clocks
[ +0.257607] ata6: SATA link down (SStatus 4 SControl 300)
[ +0.000054] ata3: SATA link down (SStatus 4 SControl 300)
[ +0.000053] ata2: SATA link down (SStatus 4 SControl 300)
[ +0.000055] ata1: SATA link down (SStatus 4 SControl 300)
[ +0.000057] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ +0.000055] ata4: SATA link down (SStatus 4 SControl 300)
[ +0.003860] ata5.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D1M, max UDMA/133
[ +0.010776] ata5.00: configured for UDMA/133
[ +0.016824] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5LH 6D1M PQ: 0 ANSI: 5
[ +0.034130] Freeing unused decrypted memory: 2028K
[ +0.000510] Freeing unused kernel image (initmem) memory: 3416K
[ +0.005641] Write protecting the kernel read-only data: 30720k
[ +0.001330] Freeing unused kernel image (rodata/data gap) memory: 1264K
[ +0.013995] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0.000004] rodata_test: all tests were successful
[ +0.000005] Run /init as init process
[ +0.000001] with arguments:
[ +0.000001] /init
[ +0.000000] with environment:
[ +0.000001] HOME=/
[ +0.000000] TERM=linux
[ +0.000001] BOOT_IMAGE=/boot/vmlinuz-linux-lts
[ +0.073432] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
[ +0.255435] i915 0000:00:02.0: vgaarb: deactivate vga console
[ +0.000167] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ +0.001734] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ +0.001960] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)
[ +0.016474] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.13.1
[ +0.000002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
[ +0.014089] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[ +0.000012] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[ +0.000003] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[ +0.001189] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ +0.040671] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
[ +0.003715] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ +0.001643] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ +0.038800] fbcon: i915drmfb (fb0) is primary device
[ +0.000004] fbcon: Deferring console take-over
[ +0.000003] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ +0.158115] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
[ +0.000275] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0.000005] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ +0.001107] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ +0.000229] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0.000002] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ +0.000002] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[ +0.000063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ +0.000004] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000002] usb usb1: Product: xHCI Host Controller
[ +0.000001] usb usb1: Manufacturer: Linux 6.6.11-2-lts xhci-hcd
[ +0.000001] usb usb1: SerialNumber: 0000:00:14.0
[ +0.000116] hub 1-0:1.0: USB hub found
[ +0.000028] hub 1-0:1.0: 16 ports detected
[ +0.002443] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ +0.000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000001] usb usb2: Product: xHCI Host Controller
[ +0.000001] usb usb2: Manufacturer: Linux 6.6.11-2-lts xhci-hcd
[ +0.000001] usb usb2: SerialNumber: 0000:00:14.0
[ +0.000044] hub 2-0:1.0: USB hub found
[ +0.000018] hub 2-0:1.0: 9 ports detected
[ +0.003512] nvme 0000:01:00.0: platform quirk: setting simple suspend
[ +0.000001] nvme 0000:03:00.0: platform quirk: setting simple suspend
[ +0.000049] nvme nvme0: pci function 0000:03:00.0
[ +0.000001] nvme nvme1: pci function 0000:01:00.0
[ +0.008100] nvme nvme1: missing or invalid SUBNQN field.
[ +0.000167] nvme nvme1: Shutdown timeout set to 8 seconds
[ +0.009656] nvme nvme0: 24/0/0 default/read/poll queues
[ +0.003439] nvme0n1: p1
[ +0.009353] nvme nvme1: 24/0/0 default/read/poll queues
[ +0.004888] nvme1n1: p1 p2 p3 p4 p5
[ +0.018038] device-mapper: uevent: version 1.0.3
[ +0.000045] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ +0.003760] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ +0.000008] cdrom: Uniform CD-ROM driver Revision: 3.20
[ +0.045854] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ +0.145931] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ +0.150843] usb 1-5: New USB device found, idVendor=0b0e, idProduct=245e, bcdDevice= 1.87
[ +0.000013] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ +0.000005] usb 1-5: Product: Jabra Link 370
[ +0.000004] usb 1-5: SerialNumber: 50C2ED3F6210
[ +0.022925] usbcore: registered new interface driver usbhid
[ +0.000007] usbhid: USB HID core driver
[ +0.009028] input: Jabra Link 370 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.3/0003:0B0E:245E.0001/input/input3
[ +0.054520] jabra 0003:0B0E:245E.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Jabra Link 370] on usb-0000:00:14.0-5/input3
[ +0.026479] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ +0.029517] usb 2-4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[ +0.000009] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000003] usb 2-4: Product: DataTraveler 3.0
[ +0.000002] usb 2-4: Manufacturer: Kingston
[ +0.000002] usb 2-4: SerialNumber: E0D55EA574ECF770783302E9
[ +0.016732] usb-storage 2-4:1.0: USB Mass Storage device detected
[ +0.000118] scsi host8: usb-storage 2-4:1.0
[ +0.000052] usbcore: registered new interface driver usb-storage
[ +0.002896] usbcore: registered new interface driver uas
[ +0.062313] fbcon: Taking over console
[ +0.034356] usb 1-7: new low-speed USB device number 3 using xhci_hcd
[ +0.031701] EXT4-fs (dm-0): mounted filesystem aa2f2b08-6935-4b5e-9faf-47b4a170dca8 r/w with ordered data mode. Quota mode: none.
[ +0.076956] Console: switching to colour frame buffer device 240x67
[ +0.045696] usb 1-7: New USB device found, idVendor=045e, idProduct=082c, bcdDevice= 1.06
[ +0.000011] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000005] usb 1-7: Product: Microsoft Ergonomic Keyboard
[ +0.000003] usb 1-7: Manufacturer: Microsoft
[ +0.000003] usb 1-7: SerialNumber: 601333504721
[ +0.017349] input: Microsoft Microsoft Ergonomic Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input4
[ +0.000361] systemd[1]: systemd 255.2-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ +0.000005] systemd[1]: Detected architecture x86-64.
[ +0.000603] systemd[1]: Hostname set to <pc-dada-01-linux>.
[ +0.054203] input: Microsoft Microsoft Ergonomic Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input5
[ +0.000206] hid-generic 0003:045E:082C.0002: input,hiddev97,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft Ergonomic Keyboard] on usb-0000:00:14.0-7/input0
[ +0.005574] hid-generic 0003:045E:082C.0003: hiddev98,hidraw2: USB HID v1.11 Device [Microsoft Microsoft Ergonomic Keyboard] on usb-0000:00:14.0-7/input1
[ +0.120875] usb 1-8: new low-speed USB device number 4 using xhci_hcd
[ +0.145897] usb 1-8: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
[ +0.000015] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ +0.000004] usb 1-8: Product: USB Laser Mouse
[ +0.000004] usb 1-8: Manufacturer: Logitech
[ +0.007852] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C069.0004/input/input7
[ +0.000547] hid-generic 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-8/input0
[ +0.122340] usb 1-9: new high-speed USB device number 5 using xhci_hcd
[ +0.040051] systemd[1]: bpf-lsm: LSM BPF program attached
[ +0.100474] usb 1-9: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[ +0.000003] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ +0.000001] usb 1-9: Product: USB 2.0 Hub [MTT]
[ +0.001239] hub 1-9:1.0: USB hub found
[ +0.000061] hub 1-9:1.0: 7 ports detected
[ +0.008792] systemd[1]: Queued start job for default target Graphical Interface.
[ +0.037510] systemd[1]: Created slice Virtual Machine and Container Slice.
[ +0.000986] systemd[1]: Created slice Slice /system/getty.
[ +0.000528] systemd[1]: Created slice Slice /system/modprobe.
[ +0.000535] systemd[1]: Created slice Slice /system/systemd-fsck.
[ +0.000381] systemd[1]: Created slice User and Session Slice.
[ +0.000112] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ +0.000075] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0.000318] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0.000031] systemd[1]: Expecting device /dev/disk/by-uuid/37e20dd0-16a5-4b24-8216-41dd29ad89a8...
[ +0.000011] systemd[1]: Expecting device /dev/disk/by-uuid/470323bc-b491-4c3e-ab0f-e87686b3be45...
[ +0.000013] systemd[1]: Expecting device /dev/disk/by-uuid/7e39a696-d80f-43d4-879b-de43b44b1424...
[ +0.000016] systemd[1]: Reached target Local Encrypted Volumes.
[ +0.000025] systemd[1]: Reached target Login Prompts.
[ +0.000021] systemd[1]: Reached target Local Integrity Protected Volumes.
[ +0.000047] systemd[1]: Reached target Remote File Systems.
[ +0.000019] systemd[1]: Reached target Slice Units.
[ +0.000043] systemd[1]: Reached target Local Verity Protected Volumes.
[ +0.000119] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ +0.000191] systemd[1]: Listening on LVM2 poll daemon socket.
[ +0.002629] systemd[1]: Listening on Process Core Dump Socket.
[ +0.000207] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0.000163] systemd[1]: Listening on Journal Socket.
[ +0.000230] systemd[1]: Listening on Network Service Netlink Socket.
[ +0.000042] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ +0.000309] systemd[1]: Listening on udev Control Socket.
[ +0.000114] systemd[1]: Listening on udev Kernel Socket.
[ +0.001855] systemd[1]: Mounting Huge Pages File System...
[ +0.001379] systemd[1]: Mounting POSIX Message Queue File System...
[ +0.001404] systemd[1]: Mounting Kernel Debug File System...
[ +0.001496] systemd[1]: Mounting Kernel Trace File System...
[ +0.001830] systemd[1]: Starting Create List of Static Device Nodes...
[ +0.001025] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ +0.000384] systemd[1]: Starting Load Kernel Module configfs...
[ +0.000963] systemd[1]: Starting Load Kernel Module dm_mod...
[ +0.001750] systemd[1]: Starting Load Kernel Module drm...
[ +0.001714] systemd[1]: Starting Load Kernel Module fuse...
[ +0.001999] systemd[1]: Starting Load Kernel Module loop...
[ +0.000058] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ +0.001085] systemd[1]: Starting Journal Service...
[ +0.001008] systemd[1]: Starting Load Kernel Modules...
[ +0.000344] systemd[1]: Starting Generate network units from Kernel command line...
[ +0.000010] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ +0.000334] systemd[1]: Starting Remount Root and Kernel File Systems...
[ +0.000020] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ +0.000646] systemd[1]: Starting Coldplug All udev Devices...
[ +0.001918] systemd[1]: Mounted Huge Pages File System.
[ +0.000152] systemd[1]: Mounted POSIX Message Queue File System.
[ +0.000099] systemd[1]: Mounted Kernel Debug File System.
[ +0.000098] systemd[1]: Mounted Kernel Trace File System.
[ +0.006970] fuse: init (API version 7.39)
[ +0.000121] loop: module loaded
[ +0.003510] systemd-journald[411]: Collecting audit messages is disabled.
[ +0.031245] Bluetooth: Core ver 2.22
[ +0.000012] NET: Registered PF_BLUETOOTH protocol family
[ +0.000001] Bluetooth: HCI device and connection manager initialized
[ +0.000003] Bluetooth: HCI socket layer initialized
[ +0.000001] Bluetooth: L2CAP socket layer initialized
[ +0.000002] Bluetooth: SCO socket layer initialized
[ +0.004649] systemd[1]: Finished Create List of Static Device Nodes.
[ +0.000159] systemd[1]: Started Journal Service.
[ +0.000346] EXT4-fs (dm-0): re-mounted aa2f2b08-6935-4b5e-9faf-47b4a170dca8 r/w. Quota mode: none.
[ +0.005906] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[ +0.002580] usbcore: registered new interface driver btusb
[ +0.001214] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
[ +0.000370] sd 8:0:0:0: [sda] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[ +0.000147] sd 8:0:0:0: [sda] Write Protect is off
[ +0.000001] sd 8:0:0:0: [sda] Mode Sense: 4f 00 00 00
[ +0.000135] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.001245] sda: sda1 sda2 sda3
[ +0.000093] sd 8:0:0:0: [sda] Attached SCSI removable disk
[ +0.000101] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ +0.000014] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ +0.143761] usb 1-10: New USB device found, idVendor=0b0e, idProduct=0311, bcdDevice= 2.97
[ +0.000014] usb 1-10: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ +0.000005] usb 1-10: Product: Jabra Evolve 65
[ +0.000004] usb 1-10: SerialNumber: 50C2ED49119C
[ +0.005694] input: Jabra Evolve 65 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B0E:0311.0005/input/input8
[ +0.055577] jabra 0003:0B0E:0311.0005: input,hiddev99,hidraw4: USB HID v1.11 Device [Jabra Evolve 65] on usb-0000:00:14.0-10/input0
[ +0.029206] usb 1-9.1: new full-speed USB device number 7 using xhci_hcd
[ +0.088162] systemd-journald[411]: Received client request to flush runtime journal.
[ +0.018744] systemd-journald[411]: /var/log/journal/47620932ff694cd5908f9c8c47e2a15b/system.journal: Journal file uses a different sequence number ID, rotating.
[ +0.000011] systemd-journald[411]: Rotating system journal.
[ +0.006310] usb 1-9.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000007] usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000002] usb 1-9.1: Product: FT232R USB UART
[ +0.000003] usb 1-9.1: Manufacturer: FTDI
[ +0.000001] usb 1-9.1: SerialNumber: AC01R6P2
[ +0.103485] usb 1-9.2: new full-speed USB device number 8 using xhci_hcd
[ +0.113417] usb 1-9.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000014] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000005] usb 1-9.2: Product: FT232R USB UART
[ +0.000004] usb 1-9.2: Manufacturer: FTDI
[ +0.000003] usb 1-9.2: SerialNumber: AC01R6P4
[ +0.096512] usb 1-9.3: new full-speed USB device number 9 using xhci_hcd
[ +0.113068] Consider using thermal netlink events interface
[ +0.000552] input: Intel HID events as /devices/platform/INTC1070:00/input/input9
[ +0.001198] intel-hid INTC1070:00: platform supports 5 button array
[ +0.000109] input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input10
[ +0.001769] usb 1-9.3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000004] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000002] usb 1-9.3: Product: FT232R USB UART
[ +0.000002] usb 1-9.3: Manufacturer: FTDI
[ +0.000001] usb 1-9.3: SerialNumber: AC01R6P6
[ +0.012393] ACPI: battery: new extension: Dell DDV Battery Extension
[ +0.010165] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ +0.000249] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ +0.020411] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ +0.000112] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ +0.000054] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ +0.000306] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ +0.000154] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ +0.000125] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ +0.000159] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[ +0.000329] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ +0.000002] cfg80211: failed to load regulatory.db
[ +0.001036] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ +0.000812] Creating 1 MTD partitions on "0000:00:1f.5":
[ +0.000002] 0x000000000000-0x000003000000 : "BIOS"
[ +0.000001] mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x1000000
[ +0.001250] spi-nor spi0.1: gd25q256 (32768 Kbytes)
[ +0.053655] Adding 33554428k swap on /dev/mapper/lvm-swap. Priority:-2 extents:1 across:33554428k SSDsc
[ +0.002033] e1000e: Intel(R) PRO/1000 Network Driver
[ +0.000002] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ +0.000400] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ +0.000886] i2c i2c-12: 2/4 memory slots populated (from DMI)
[ +0.000002] i2c i2c-12: Memory type 0x22 not supported yet, not instantiating SPD
[ +0.005242] usb 1-9.4: new full-speed USB device number 10 using xhci_hcd
[ +0.016098] tg3 0000:02:00.0 eth0: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:f8
[ +0.000003] tg3 0000:02:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ +0.000001] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ +0.000001] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ +0.012508] mousedev: PS/2 mouse device common for all mice
[ +0.006305] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
[ +0.001332] intel_rapl_msr: PL4 support detected.
[ +0.000111] intel_rapl_common: Found RAPL domain package
[ +0.000002] intel_rapl_common: Found RAPL domain core
[ +0.000001] intel_rapl_common: Found RAPL domain uncore
[ +0.000078] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ +0.000003] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ +0.000001] RAPL PMU: hw unit of domain package 2^-14 Joules
[ +0.000001] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ +0.003110] tg3 0000:02:00.1 eth1: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:f9
[ +0.000004] tg3 0000:02:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ +0.000002] tg3 0000:02:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ +0.000002] tg3 0000:02:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ +0.000112] tg3 0000:02:00.2: enabling device (0000 -> 0002)
[ +0.000126] mc: Linux media interface: v0.10
[ +0.000206] cryptd: max_cpu_qlen set to 1000
[ +0.000630] iTCO_vendor_support: vendor-support=0
[ +0.003331] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ +0.000398] input: Dell Privacy Driver as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/6932965F-1671-4CEB-B988-D3AB0A901919/input/input11
[ +0.000033] intel_rapl_common: Found RAPL domain package
[ +0.000232] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
[ +0.000301] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
[ +0.002327] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ +0.004370] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ +0.000390] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ +0.000263] AVX2 version of gcm_enc/dec engaged.
[ +0.000031] AES CTR mode by8 optimization enabled
[ +0.008752] tg3 0000:02:00.2 eth2: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:fa
[ +0.000004] tg3 0000:02:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ +0.000002] tg3 0000:02:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ +0.000001] tg3 0000:02:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
[ +0.000098] tg3 0000:02:00.3: enabling device (0000 -> 0002)
[ +0.006703] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ +0.013140] tg3 0000:02:00.3 eth3: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:fb
[ +0.000003] tg3 0000:02:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ +0.000002] tg3 0000:02:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ +0.000000] tg3 0000:02:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
[ +0.040200] usb 1-9.4: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000003] usb 1-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000001] usb 1-9.4: Product: FT232R USB UART
[ +0.000001] usb 1-9.4: Manufacturer: FTDI
[ +0.000001] usb 1-9.4: SerialNumber: AC01R6P8
[ +0.012437] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ +0.000436] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ +0.001298] e1000e 0000:00:1f.6 eth4: (PCI Express:2.5GT/s:Width x1) cc:96:e5:09:e7:ea
[ +0.000006] e1000e 0000:00:1f.6 eth4: Intel(R) PRO/1000 Network Connection
[ +0.000079] e1000e 0000:00:1f.6 eth4: MAC: 15, PHY: 12, PBA No: FFFFFF-0FF
[ +0.001073] tg3 0000:02:00.3 testlan: renamed from eth3
[ +0.005285] i8042: PNP: No PS/2 controller found.
[ +0.018395] tg3 0000:02:00.1 testlan2: renamed from eth1
[ +0.002635] EXT4-fs (dm-2): mounted filesystem 470323bc-b491-4c3e-ab0f-e87686b3be45 r/w with ordered data mode. Quota mode: none.
[ +0.017995] EXT4-fs (nvme0n1p1): mounted filesystem 37e20dd0-16a5-4b24-8216-41dd29ad89a8 r/w with ordered data mode. Quota mode: none.
[ +0.003432] tg3 0000:02:00.0 wand: renamed from eth0
[ +0.016561] usbcore: registered new interface driver snd-usb-audio
[ +0.003204] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3246: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ +0.000003] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ +0.000001] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ +0.000001] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ +0.000000] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ +0.000001] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
[ +0.000001] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
[ +0.012742] tg3 0000:02:00.2 tbox: renamed from eth2
[ +0.003184] usb 1-9.5: new full-speed USB device number 11 using xhci_hcd
[ +0.060184] e1000e 0000:00:1f.6 lan: renamed from eth4
[ +0.019721] intel_tcc_cooling: TCC Offset locked
[ +0.007675] t2bridge: port 1(testlan2) entered blocking state
[ +0.000002] t2bridge: port 1(testlan2) entered disabled state
[ +0.000007] tg3 0000:02:00.1 testlan2: entered allmulticast mode
[ +0.000021] tg3 0000:02:00.1 testlan2: entered promiscuous mode
[ +0.000557] boxbridge: port 1(tbox) entered blocking state
[ +0.000003] boxbridge: port 1(tbox) entered disabled state
[ +0.000005] tg3 0000:02:00.2 tbox: entered allmulticast mode
[ +0.000021] tg3 0000:02:00.2 tbox: entered promiscuous mode
[ +0.032287] usb 1-9.5: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000012] usb 1-9.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000005] usb 1-9.5: Product: FT232R USB UART
[ +0.000004] usb 1-9.5: Manufacturer: FTDI
[ +0.000003] usb 1-9.5: SerialNumber: AC01R6P7
[ +0.009347] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input13
[ +0.000036] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card1/input14
[ +0.000056] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input15
[ +0.001169] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input16
[ +0.000492] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input17
[ +0.000491] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input18
[ +0.076641] tbridge: port 1(testlan) entered blocking state
[ +0.000002] tbridge: port 1(testlan) entered disabled state
[ +0.000004] tg3 0000:02:00.3 testlan: entered allmulticast mode
[ +0.000037] tg3 0000:02:00.3 testlan: entered promiscuous mode
[ +0.007918] usb 1-9.6: new full-speed USB device number 12 using xhci_hcd
[ +0.111417] qbridge: port 1(lan) entered blocking state
[ +0.000003] qbridge: port 1(lan) entered disabled state
[ +0.000003] e1000e 0000:00:1f.6 lan: entered allmulticast mode
[ +0.000020] e1000e 0000:00:1f.6 lan: entered promiscuous mode
[ +0.003494] usb 1-9.6: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000002] usb 1-9.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000001] usb 1-9.6: Product: FT232R USB UART
[ +0.000001] usb 1-9.6: Manufacturer: FTDI
[ +0.000001] usb 1-9.6: SerialNumber: AC01R6P5
[ +0.195130] usb 1-9.7: new high-speed USB device number 13 using xhci_hcd
[ +0.096735] usb 1-9.7: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[ +0.000003] usb 1-9.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ +0.000001] usb 1-9.7: Product: USB 2.0 Hub [MTT]
[ +0.001103] hub 1-9.7:1.0: USB hub found
[ +0.000041] hub 1-9.7:1.0: 7 ports detected
[ +0.009602] usbcore: registered new interface driver ftdi_sio
[ +0.000007] usbserial: USB Serial support registered for FTDI USB Serial Device
[ +0.000018] ftdi_sio 1-9.1:1.0: FTDI USB Serial Device converter detected
[ +0.000015] usb 1-9.1: Detected FT232R
[ +0.000427] usb 1-9.1: FTDI USB Serial Device converter now attached to ttyUSB0
[ +0.000010] ftdi_sio 1-9.2:1.0: FTDI USB Serial Device converter detected
[ +0.000007] usb 1-9.2: Detected FT232R
[ +0.000353] usb 1-9.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ +0.000008] ftdi_sio 1-9.3:1.0: FTDI USB Serial Device converter detected
[ +0.000009] usb 1-9.3: Detected FT232R
[ +0.000282] usb 1-9.3: FTDI USB Serial Device converter now attached to ttyUSB2
[ +0.000007] ftdi_sio 1-9.4:1.0: FTDI USB Serial Device converter detected
[ +0.000009] usb 1-9.4: Detected FT232R
[ +0.000356] usb 1-9.4: FTDI USB Serial Device converter now attached to ttyUSB3
[ +0.000007] ftdi_sio 1-9.5:1.0: FTDI USB Serial Device converter detected
[ +0.000005] usb 1-9.5: Detected FT232R
[ +0.000292] usb 1-9.5: FTDI USB Serial Device converter now attached to ttyUSB4
[ +0.000007] ftdi_sio 1-9.6:1.0: FTDI USB Serial Device converter detected
[ +0.000006] usb 1-9.6: Detected FT232R
[ +0.000482] usb 1-9.6: FTDI USB Serial Device converter now attached to ttyUSB5
[ +0.003793] qbridge: port 1(lan) entered blocking state
[ +0.000005] qbridge: port 1(lan) entered forwarding state
[ +0.166498] loop0: detected capacity change from 0 to 204800
[ +0.001505] loop1: detected capacity change from 0 to 2048
[ +0.005117] md0: detected capacity change from 0 to 949424128
[ +0.002281] md0: p1 p2
[ +0.017978] qbridge: port 1(lan) entered disabled state
[ +0.099599] usb 1-9.7.1: new full-speed USB device number 14 using xhci_hcd
[ +0.123222] usb 1-9.7.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000004] usb 1-9.7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000002] usb 1-9.7.1: Product: FT232R USB UART
[ +0.000001] usb 1-9.7.1: Manufacturer: FTDI
[ +0.000000] usb 1-9.7.1: SerialNumber: AC01R6P3
[ +0.008096] ftdi_sio 1-9.7.1:1.0: FTDI USB Serial Device converter detected
[ +0.000017] usb 1-9.7.1: Detected FT232R
[ +0.000483] usb 1-9.7.1: FTDI USB Serial Device converter now attached to ttyUSB6
[ +0.092231] qemu-system-x86[802]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ +0.002606] usb 1-9.7.2: new full-speed USB device number 15 using xhci_hcd
[ +0.117189] usb 1-9.7.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ +0.000004] usb 1-9.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000001] usb 1-9.7.2: Product: FT232R USB UART
[ +0.000001] usb 1-9.7.2: Manufacturer: FTDI
[ +0.000001] usb 1-9.7.2: SerialNumber: AC01R6P1
[ +0.007949] ftdi_sio 1-9.7.2:1.0: FTDI USB Serial Device converter detected
[ +0.000012] usb 1-9.7.2: Detected FT232R
[ +0.000360] usb 1-9.7.2: FTDI USB Serial Device converter now attached to ttyUSB7
[ +0.637277] tg3 0000:02:00.2 tbox: Link is up at 100 Mbps, full duplex
[ +0.000006] tg3 0000:02:00.2 tbox: Flow control is on for TX and on for RX
[ +0.000001] tg3 0000:02:00.2 tbox: EEE is disabled
[ +0.000024] boxbridge: port 1(tbox) entered blocking state
[ +0.000002] boxbridge: port 1(tbox) entered forwarding state
[ +2.066485] e1000e 0000:00:1f.6 lan: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ +0.000103] qbridge: port 1(lan) entered blocking state
[ +0.000003] qbridge: port 1(lan) entered forwarding state
[ +0.117316] tg3 0000:02:00.3 testlan: Link is up at 1000 Mbps, full duplex
[ +0.000020] tg3 0000:02:00.3 testlan: Flow control is on for TX and on for RX
[ +0.000006] tg3 0000:02:00.3 testlan: EEE is enabled
[ +0.000110] tbridge: port 1(testlan) entered blocking state
[ +0.000008] tbridge: port 1(testlan) entered forwarding stateAnd the journal:
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:02.0: vgaarb: bridge control possible
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Jan 16 08:05:25 pc-dada-01-linux kernel: vgaarb: loaded
Jan 16 08:05:25 pc-dada-01-linux kernel: clocksource: Switched to clocksource tsc-early
Jan 16 08:05:25 pc-dada-01-linux kernel: VFS: Disk quotas dquot_6.6.0
Jan 16 08:05:25 pc-dada-01-linux kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 16 08:05:25 pc-dada-01-linux kernel: pnp: PnP ACPI init
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:00: [io 0x0680-0x069f] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:00: [io 0x164e-0x164f] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:02: [io 0x1854-0x1857] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: pnp 00:03: [dma 0 disabled]
Jan 16 08:05:25 pc-dada-01-linux kernel: pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: system 00:05: [io 0x2000-0x20fe] has been reserved
Jan 16 08:05:25 pc-dada-01-linux kernel: pnp: PnP ACPI: found 7 devices
Jan 16 08:05:25 pc-dada-01-linux kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Jan 16 08:05:25 pc-dada-01-linux kernel: NET: Registered PF_INET protocol family
Jan 16 08:05:25 pc-dada-01-linux kernel: IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jan 16 08:05:25 pc-dada-01-linux kernel: MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
Jan 16 08:05:25 pc-dada-01-linux kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
Jan 16 08:05:25 pc-dada-01-linux kernel: NET: Registered PF_XDP protocol family
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.1: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.2: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.3: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1a.0: BAR 14: assigned [mem 0x70900000-0x709fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1f.5: BAR 0: assigned [mem 0x70800000-0x70800fff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:06.0: PCI bridge to [bus 01]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:06.0: bridge window [mem 0x70700000-0x707fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0x70900000-0x7093ffff pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.1: BAR 6: assigned [mem 0x70940000-0x7097ffff pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.2: BAR 6: assigned [mem 0x70980000-0x709bffff pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:02:00.3: BAR 6: assigned [mem 0x709c0000-0x709fffff pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1a.0: PCI bridge to [bus 02]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1a.0: bridge window [mem 0x70900000-0x709fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1a.0: bridge window [mem 0x6001000000-0x60010fffff 64bit pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1b.0: PCI bridge to [bus 03]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1b.0: bridge window [mem 0x70600000-0x706fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1c.0: bridge window [mem 0x70500000-0x705fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 05]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci 0000:00:1c.4: bridge window [mem 0x70400000-0x704fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:00: resource 7 [mem 0x70400000-0xbfffffff window]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:01: resource 1 [mem 0x70700000-0x707fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:02: resource 1 [mem 0x70900000-0x709fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:02: resource 2 [mem 0x6001000000-0x60010fffff 64bit pref]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:03: resource 1 [mem 0x70600000-0x706fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:04: resource 1 [mem 0x70500000-0x705fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
Jan 16 08:05:25 pc-dada-01-linux kernel: pci_bus 0000:05: resource 1 [mem 0x70400000-0x704fffff]
Jan 16 08:05:25 pc-dada-01-linux kernel: PCI: CLS 0 bytes, default 64
Jan 16 08:05:25 pc-dada-01-linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jan 16 08:05:25 pc-dada-01-linux kernel: software IO TLB: mapped [mem 0x000000004c730000-0x0000000050730000] (64MB)
Jan 16 08:05:25 pc-dada-01-linux kernel: Trying to unpack rootfs image as initramfs...
Jan 16 08:05:25 pc-dada-01-linux kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2df10e7656b, max_idle_ns: 440795364873 ns
Jan 16 08:05:25 pc-dada-01-linux kernel: clocksource: Switched to clocksource tsc
Jan 16 08:05:25 pc-dada-01-linux kernel: Initialise system trusted keyrings
Jan 16 08:05:25 pc-dada-01-linux kernel: Key type blacklist registered
Jan 16 08:05:25 pc-dada-01-linux kernel: workingset: timestamp_bits=41 max_order=23 bucket_order=0
Jan 16 08:05:25 pc-dada-01-linux kernel: zbud: loaded
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Platform Keyring initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Machine keyring initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: Key type asymmetric registered
Jan 16 08:05:25 pc-dada-01-linux kernel: Asymmetric key parser 'x509' registered
Jan 16 08:05:25 pc-dada-01-linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
Jan 16 08:05:25 pc-dada-01-linux kernel: io scheduler mq-deadline registered
Jan 16 08:05:25 pc-dada-01-linux kernel: io scheduler kyber registered
Jan 16 08:05:25 pc-dada-01-linux kernel: io scheduler bfq registered
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:06.0: PME: Signaling with IRQ 122
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:06.0: AER: enabled with IRQ 122
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1a.0: PME: Signaling with IRQ 123
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1a.0: AER: enabled with IRQ 123
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1b.0: PME: Signaling with IRQ 124
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1b.0: AER: enabled with IRQ 124
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1c.0: AER: enabled with IRQ 125
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1c.4: PME: Signaling with IRQ 126
Jan 16 08:05:25 pc-dada-01-linux kernel: pcieport 0000:00:1c.4: AER: enabled with IRQ 126
Jan 16 08:05:25 pc-dada-01-linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Jan 16 08:05:25 pc-dada-01-linux kernel: ACPI: button: Power Button [PBTN]
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Jan 16 08:05:25 pc-dada-01-linux kernel: ACPI: button: Sleep Button [SBTN]
Jan 16 08:05:25 pc-dada-01-linux kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Jan 16 08:05:25 pc-dada-01-linux kernel: 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Jan 16 08:05:25 pc-dada-01-linux kernel: serial 0000:00:16.3: enabling device (0000 -> 0003)
Jan 16 08:05:25 pc-dada-01-linux kernel: 0000:00:16.3: ttyS4 at I/O 0x4088 (irq = 19, base_baud = 115200) is a 16550A
Jan 16 08:05:25 pc-dada-01-linux kernel: 0000:05:00.0: ttyS5 at I/O 0x3018 (irq = 16, base_baud = 115200) is a 16550A
Jan 16 08:05:25 pc-dada-01-linux kernel: 0000:05:00.1: ttyS6 at I/O 0x3010 (irq = 17, base_baud = 115200) is a 16550A
Jan 16 08:05:25 pc-dada-01-linux kernel: serial 0000:05:00.2: enabling device (0000 -> 0003)
Jan 16 08:05:25 pc-dada-01-linux kernel: 0000:05:00.2: ttyS7 at I/O 0x3008 (irq = 18, base_baud = 115200) is a 16550A
Jan 16 08:05:25 pc-dada-01-linux kernel: serial 0000:05:00.3: enabling device (0000 -> 0003)
Jan 16 08:05:25 pc-dada-01-linux kernel: 0000:05:00.3: ttyS8 at I/O 0x3000 (irq = 19, base_baud = 115200) is a 16550A
Jan 16 08:05:25 pc-dada-01-linux kernel: hpet_acpi_add: no address or irqs in _CRS
Jan 16 08:05:25 pc-dada-01-linux kernel: Non-volatile memory driver v1.3
Jan 16 08:05:25 pc-dada-01-linux kernel: Linux agpgart interface v0.103
Jan 16 08:05:25 pc-dada-01-linux kernel: tpm_tis NTC0702:00: 2.0 TPM (device-id 0xFC, rev-id 1)
Jan 16 08:05:25 pc-dada-01-linux kernel: Freeing initrd memory: 25916K
Jan 16 08:05:25 pc-dada-01-linux kernel: AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
Jan 16 08:05:25 pc-dada-01-linux kernel: ACPI: bus type drm_connector registered
Jan 16 08:05:25 pc-dada-01-linux kernel: [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
Jan 16 08:05:25 pc-dada-01-linux kernel: fbcon: Deferring console take-over
Jan 16 08:05:25 pc-dada-01-linux kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
Jan 16 08:05:25 pc-dada-01-linux kernel: ahci 0000:00:17.0: version 3.0
Jan 16 08:05:25 pc-dada-01-linux kernel: ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x3f impl SATA mode
Jan 16 08:05:25 pc-dada-01-linux kernel: ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host0: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host1: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host2: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host3: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host4: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host5: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host6: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host7: ahci
Jan 16 08:05:25 pc-dada-01-linux kernel: ata1: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863100 irq 127
Jan 16 08:05:25 pc-dada-01-linux kernel: ata2: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863180 irq 127
Jan 16 08:05:25 pc-dada-01-linux kernel: ata3: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863200 irq 127
Jan 16 08:05:25 pc-dada-01-linux kernel: ata4: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863280 irq 127
Jan 16 08:05:25 pc-dada-01-linux kernel: ata5: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863300 irq 127
Jan 16 08:05:25 pc-dada-01-linux kernel: ata6: SATA max UDMA/133 abar m2048@0x70863000 port 0x70863380 irq 127
Jan 16 08:05:25 pc-dada-01-linux kernel: ata7: DUMMY
Jan 16 08:05:25 pc-dada-01-linux kernel: ata8: DUMMY
Jan 16 08:05:25 pc-dada-01-linux kernel: usbcore: registered new interface driver usbserial_generic
Jan 16 08:05:25 pc-dada-01-linux kernel: usbserial: USB Serial support registered for generic
Jan 16 08:05:25 pc-dada-01-linux kernel: rtc_cmos 00:01: RTC can wake from S4
Jan 16 08:05:25 pc-dada-01-linux kernel: rtc_cmos 00:01: registered as rtc0
Jan 16 08:05:25 pc-dada-01-linux kernel: rtc_cmos 00:01: setting system clock to 2024-01-16T07:05:22 UTC (1705388722)
Jan 16 08:05:25 pc-dada-01-linux kernel: rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
Jan 16 08:05:25 pc-dada-01-linux kernel: intel_pstate: Intel P-state driver initializing
Jan 16 08:05:25 pc-dada-01-linux kernel: intel_pstate: HWP enabled
Jan 16 08:05:25 pc-dada-01-linux kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jan 16 08:05:25 pc-dada-01-linux kernel: hid: raw HID events driver (C) Jiri Kosina
Jan 16 08:05:25 pc-dada-01-linux kernel: intel_pmc_core INT33A1:00: initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: drop_monitor: Initializing network drop monitor service
Jan 16 08:05:25 pc-dada-01-linux kernel: Initializing XFRM netlink socket
Jan 16 08:05:25 pc-dada-01-linux kernel: NET: Registered PF_INET6 protocol family
Jan 16 08:05:25 pc-dada-01-linux kernel: Segment Routing with IPv6
Jan 16 08:05:25 pc-dada-01-linux kernel: RPL Segment Routing with IPv6
Jan 16 08:05:25 pc-dada-01-linux kernel: In-situ OAM (IOAM) with IPv6
Jan 16 08:05:25 pc-dada-01-linux kernel: NET: Registered PF_PACKET protocol family
Jan 16 08:05:25 pc-dada-01-linux kernel: microcode: Microcode Update Driver: v2.2.
Jan 16 08:05:25 pc-dada-01-linux kernel: IPI shorthand broadcast: enabled
Jan 16 08:05:25 pc-dada-01-linux kernel: sched_clock: Marking stable (1183336404, 6352599)->(1210952563, -21263560)
Jan 16 08:05:25 pc-dada-01-linux kernel: registered taskstats version 1
Jan 16 08:05:25 pc-dada-01-linux kernel: Loading compiled-in X.509 certificates
Jan 16 08:05:25 pc-dada-01-linux kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 3198123a5db87438cd5e8251b4ced454aa0db865'
Jan 16 08:05:25 pc-dada-01-linux kernel: zswap: loaded using pool zstd/zsmalloc
Jan 16 08:05:25 pc-dada-01-linux kernel: Key type .fscrypt registered
Jan 16 08:05:25 pc-dada-01-linux kernel: Key type fscrypt-provisioning registered
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loading X.509 certificate: UEFI:db
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487'
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loading X.509 certificate: UEFI:db
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd'
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loading X.509 certificate: UEFI:db
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loading X.509 certificate: UEFI:db
Jan 16 08:05:25 pc-dada-01-linux kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
Jan 16 08:05:25 pc-dada-01-linux kernel: PM: Magic number: 8:424:66
Jan 16 08:05:25 pc-dada-01-linux kernel: memory memory227: hash matches
Jan 16 08:05:25 pc-dada-01-linux kernel: memory memory94: hash matches
Jan 16 08:05:25 pc-dada-01-linux kernel: RAS: Correctable Errors collector initialized.
Jan 16 08:05:25 pc-dada-01-linux kernel: clk: Disabling unused clocks
Jan 16 08:05:25 pc-dada-01-linux kernel: ata6: SATA link down (SStatus 4 SControl 300)
Jan 16 08:05:25 pc-dada-01-linux kernel: ata3: SATA link down (SStatus 4 SControl 300)
Jan 16 08:05:25 pc-dada-01-linux kernel: ata2: SATA link down (SStatus 4 SControl 300)
Jan 16 08:05:25 pc-dada-01-linux kernel: ata1: SATA link down (SStatus 4 SControl 300)
Jan 16 08:05:25 pc-dada-01-linux kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 16 08:05:25 pc-dada-01-linux kernel: ata4: SATA link down (SStatus 4 SControl 300)
Jan 16 08:05:25 pc-dada-01-linux kernel: ata5.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D1M, max UDMA/133
Jan 16 08:05:25 pc-dada-01-linux kernel: ata5.00: configured for UDMA/133
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5LH 6D1M PQ: 0 ANSI: 5
Jan 16 08:05:25 pc-dada-01-linux kernel: Freeing unused decrypted memory: 2028K
Jan 16 08:05:25 pc-dada-01-linux kernel: Freeing unused kernel image (initmem) memory: 3416K
Jan 16 08:05:25 pc-dada-01-linux kernel: Write protecting the kernel read-only data: 30720k
Jan 16 08:05:25 pc-dada-01-linux kernel: Freeing unused kernel image (rodata/data gap) memory: 1264K
Jan 16 08:05:25 pc-dada-01-linux kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Jan 16 08:05:25 pc-dada-01-linux kernel: rodata_test: all tests were successful
Jan 16 08:05:25 pc-dada-01-linux kernel: Run /init as init process
Jan 16 08:05:25 pc-dada-01-linux kernel: with arguments:
Jan 16 08:05:25 pc-dada-01-linux kernel: /init
Jan 16 08:05:25 pc-dada-01-linux kernel: with environment:
Jan 16 08:05:25 pc-dada-01-linux kernel: HOME=/
Jan 16 08:05:25 pc-dada-01-linux kernel: TERM=linux
Jan 16 08:05:25 pc-dada-01-linux kernel: BOOT_IMAGE=/boot/vmlinuz-linux-lts
Jan 16 08:05:25 pc-dada-01-linux kernel: wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] Using Transparent Hugepages
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.13.1
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
Jan 16 08:05:25 pc-dada-01-linux kernel: ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
Jan 16 08:05:25 pc-dada-01-linux kernel: fbcon: i915drmfb (fb0) is primary device
Jan 16 08:05:25 pc-dada-01-linux kernel: fbcon: Deferring console take-over
Jan 16 08:05:25 pc-dada-01-linux kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Jan 16 08:05:25 pc-dada-01-linux kernel: rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
Jan 16 08:05:25 pc-dada-01-linux kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan 16 08:05:25 pc-dada-01-linux kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
Jan 16 08:05:25 pc-dada-01-linux kernel: xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
Jan 16 08:05:25 pc-dada-01-linux kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan 16 08:05:25 pc-dada-01-linux kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Jan 16 08:05:25 pc-dada-01-linux kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb1: Product: xHCI Host Controller
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb1: Manufacturer: Linux 6.6.11-2-lts xhci-hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb1: SerialNumber: 0000:00:14.0
Jan 16 08:05:25 pc-dada-01-linux kernel: hub 1-0:1.0: USB hub found
Jan 16 08:05:25 pc-dada-01-linux kernel: hub 1-0:1.0: 16 ports detected
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb2: Product: xHCI Host Controller
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb2: Manufacturer: Linux 6.6.11-2-lts xhci-hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: usb usb2: SerialNumber: 0000:00:14.0
Jan 16 08:05:25 pc-dada-01-linux kernel: hub 2-0:1.0: USB hub found
Jan 16 08:05:25 pc-dada-01-linux kernel: hub 2-0:1.0: 9 ports detected
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme 0000:01:00.0: platform quirk: setting simple suspend
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme 0000:03:00.0: platform quirk: setting simple suspend
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme nvme0: pci function 0000:03:00.0
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme nvme1: pci function 0000:01:00.0
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme nvme1: missing or invalid SUBNQN field.
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme nvme1: Shutdown timeout set to 8 seconds
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme nvme0: 24/0/0 default/read/poll queues
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme0n1: p1
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme nvme1: 24/0/0 default/read/poll queues
Jan 16 08:05:25 pc-dada-01-linux kernel: nvme1n1: p1 p2 p3 p4 p5
Jan 16 08:05:25 pc-dada-01-linux kernel: device-mapper: uevent: version 1.0.3
Jan 16 08:05:25 pc-dada-01-linux kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
Jan 16 08:05:25 pc-dada-01-linux kernel: sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Jan 16 08:05:25 pc-dada-01-linux kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 16 08:05:25 pc-dada-01-linux kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-5: new full-speed USB device number 2 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-5: New USB device found, idVendor=0b0e, idProduct=245e, bcdDevice= 1.87
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-5: Product: Jabra Link 370
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-5: SerialNumber: 50C2ED3F6210
Jan 16 08:05:25 pc-dada-01-linux kernel: usbcore: registered new interface driver usbhid
Jan 16 08:05:25 pc-dada-01-linux kernel: usbhid: USB HID core driver
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Jabra Link 370 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.3/0003:0B0E:245E.0001/input/input3
Jan 16 08:05:25 pc-dada-01-linux kernel: jabra 0003:0B0E:245E.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Jabra Link 370] on usb-0000:00:14.0-5/input3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 2-4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 2-4: Product: DataTraveler 3.0
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 2-4: Manufacturer: Kingston
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 2-4: SerialNumber: E0D55EA574ECF770783302E9
Jan 16 08:05:25 pc-dada-01-linux kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi host8: usb-storage 2-4:1.0
Jan 16 08:05:25 pc-dada-01-linux kernel: usbcore: registered new interface driver usb-storage
Jan 16 08:05:25 pc-dada-01-linux kernel: usbcore: registered new interface driver uas
Jan 16 08:05:25 pc-dada-01-linux kernel: fbcon: Taking over console
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-7: new low-speed USB device number 3 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: EXT4-fs (dm-0): mounted filesystem aa2f2b08-6935-4b5e-9faf-47b4a170dca8 r/w with ordered data mode. Quota mode: none.
Jan 16 08:05:25 pc-dada-01-linux kernel: Console: switching to colour frame buffer device 240x67
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-7: New USB device found, idVendor=045e, idProduct=082c, bcdDevice= 1.06
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-7: Product: Microsoft Ergonomic Keyboard
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-7: Manufacturer: Microsoft
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-7: SerialNumber: 601333504721
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Microsoft Microsoft Ergonomic Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input4
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: systemd 255.2-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Detected architecture x86-64.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Hostname set to <pc-dada-01-linux>.
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Microsoft Microsoft Ergonomic Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:082C.0002/input/input5
Jan 16 08:05:25 pc-dada-01-linux kernel: hid-generic 0003:045E:082C.0002: input,hiddev97,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft Ergonomic Keyboard] on usb-0000:00:14.0-7/input0
Jan 16 08:05:25 pc-dada-01-linux kernel: hid-generic 0003:045E:082C.0003: hiddev98,hidraw2: USB HID v1.11 Device [Microsoft Microsoft Ergonomic Keyboard] on usb-0000:00:14.0-7/input1
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-8: new low-speed USB device number 4 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-8: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-8: Product: USB Laser Mouse
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-8: Manufacturer: Logitech
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C069.0004/input/input7
Jan 16 08:05:25 pc-dada-01-linux kernel: hid-generic 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-8/input0
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9: new high-speed USB device number 5 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: bpf-lsm: LSM BPF program attached
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9: Product: USB 2.0 Hub [MTT]
Jan 16 08:05:25 pc-dada-01-linux kernel: hub 1-9:1.0: USB hub found
Jan 16 08:05:25 pc-dada-01-linux kernel: hub 1-9:1.0: 7 ports detected
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Queued start job for default target Graphical Interface.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Created slice Virtual Machine and Container Slice.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Created slice Slice /system/getty.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Created slice Slice /system/modprobe.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Created slice Slice /system/systemd-fsck.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Created slice User and Session Slice.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Expecting device /dev/disk/by-uuid/37e20dd0-16a5-4b24-8216-41dd29ad89a8...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Expecting device /dev/disk/by-uuid/470323bc-b491-4c3e-ab0f-e87686b3be45...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Expecting device /dev/disk/by-uuid/7e39a696-d80f-43d4-879b-de43b44b1424...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Local Encrypted Volumes.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Login Prompts.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Local Integrity Protected Volumes.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Remote File Systems.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Slice Units.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Local Verity Protected Volumes.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on LVM2 poll daemon socket.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on Process Core Dump Socket.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on Journal Socket (/dev/log).
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on Journal Socket.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on Network Service Netlink Socket.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on udev Control Socket.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on udev Kernel Socket.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting Huge Pages File System...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting POSIX Message Queue File System...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting Kernel Debug File System...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting Kernel Trace File System...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Create List of Static Device Nodes...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load Kernel Module configfs...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load Kernel Module dm_mod...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load Kernel Module drm...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load Kernel Module fuse...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load Kernel Module loop...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Journal Service...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load Kernel Modules...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Generate network units from Kernel command line...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Remount Root and Kernel File Systems...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Coldplug All udev Devices...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted Huge Pages File System.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted POSIX Message Queue File System.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted Kernel Debug File System.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted Kernel Trace File System.
Jan 16 08:05:25 pc-dada-01-linux kernel: fuse: init (API version 7.39)
Jan 16 08:05:25 pc-dada-01-linux kernel: loop: module loaded
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: Collecting audit messages is disabled.
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: Journal started
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: Runtime Journal (/run/log/journal/47620932ff694cd5908f9c8c47e2a15b) is 8.0M, max 1.5G, 1.5G free.
Jan 16 08:05:25 pc-dada-01-linux systemd-modules-load[412]: Inserted module 'crypto_user'
Jan 16 08:05:25 pc-dada-01-linux lvm[405]: 3 logical volume(s) in volume group "lvm" monitored
Jan 16 08:05:25 pc-dada-01-linux kernel: Bluetooth: Core ver 2.22
Jan 16 08:05:25 pc-dada-01-linux kernel: NET: Registered PF_BLUETOOTH protocol family
Jan 16 08:05:25 pc-dada-01-linux kernel: Bluetooth: HCI device and connection manager initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: Bluetooth: HCI socket layer initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: Bluetooth: L2CAP socket layer initialized
Jan 16 08:05:25 pc-dada-01-linux kernel: Bluetooth: SCO socket layer initialized
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: modprobe@configfs.service: Deactivated successfully.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Create List of Static Device Nodes.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Started Journal Service.
Jan 16 08:05:25 pc-dada-01-linux kernel: EXT4-fs (dm-0): re-mounted aa2f2b08-6935-4b5e-9faf-47b4a170dca8 r/w. Quota mode: none.
Jan 16 08:05:25 pc-dada-01-linux systemd-modules-load[412]: Inserted module 'btusb'
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-10: new full-speed USB device number 6 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux kernel: usbcore: registered new interface driver btusb
Jan 16 08:05:25 pc-dada-01-linux systemd-modules-load[412]: Inserted module 'sg'
Jan 16 08:05:25 pc-dada-01-linux kernel: scsi 8:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
Jan 16 08:05:25 pc-dada-01-linux kernel: sd 8:0:0:0: [sda] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
Jan 16 08:05:25 pc-dada-01-linux kernel: sd 8:0:0:0: [sda] Write Protect is off
Jan 16 08:05:25 pc-dada-01-linux kernel: sd 8:0:0:0: [sda] Mode Sense: 4f 00 00 00
Jan 16 08:05:25 pc-dada-01-linux kernel: sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan 16 08:05:25 pc-dada-01-linux kernel: sda: sda1 sda2 sda3
Jan 16 08:05:25 pc-dada-01-linux kernel: sd 8:0:0:0: [sda] Attached SCSI removable disk
Jan 16 08:05:25 pc-dada-01-linux kernel: sr 4:0:0:0: Attached scsi generic sg0 type 5
Jan 16 08:05:25 pc-dada-01-linux kernel: sd 8:0:0:0: Attached scsi generic sg1 type 0
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load Kernel Module configfs.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load Kernel Module dm_mod.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: modprobe@drm.service: Deactivated successfully.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load Kernel Module drm.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: modprobe@fuse.service: Deactivated successfully.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load Kernel Module fuse.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: modprobe@loop.service: Deactivated successfully.
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-10: New USB device found, idVendor=0b0e, idProduct=0311, bcdDevice= 2.97
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-10: New USB device strings: Mfr=0, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-10: Product: Jabra Evolve 65
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-10: SerialNumber: 50C2ED49119C
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Jabra Evolve 65 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B0E:0311.0005/input/input8
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load Kernel Module loop.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load Kernel Modules.
Jan 16 08:05:25 pc-dada-01-linux kernel: jabra 0003:0B0E:0311.0005: input,hiddev99,hidraw4: USB HID v1.11 Device [Jabra Evolve 65] on usb-0000:00:14.0-10/input0
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Generate network units from Kernel command line.
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.1: new full-speed USB device number 7 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Remount Root and Kernel File Systems.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Coldplug All udev Devices.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Preparation for Network.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting FUSE Control File System...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting Kernel Configuration File System...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Flush Journal to Persistent Storage...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Load/Save OS Random Seed...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Apply Kernel Variables...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted FUSE Control File System.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted Kernel Configuration File System.
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: Time spent on flushing to /var/log/journal/47620932ff694cd5908f9c8c47e2a15b is 59.311ms for 1029 entries.
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: System Journal (/var/log/journal/47620932ff694cd5908f9c8c47e2a15b) is 421.7M, max 4.0G, 3.5G free.
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: Received client request to flush runtime journal.
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: /var/log/journal/47620932ff694cd5908f9c8c47e2a15b/system.journal: Journal file uses a different sequence number ID, rotating.
Jan 16 08:05:25 pc-dada-01-linux systemd-journald[411]: Rotating system journal.
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.1: Product: FT232R USB UART
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.1: Manufacturer: FTDI
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.1: SerialNumber: AC01R6P2
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Apply Kernel Variables.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Load/Save OS Random Seed.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.2: new full-speed USB device number 8 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Flush Journal to Persistent Storage.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Create System Users...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Create System Users.
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.2: Product: FT232R USB UART
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.2: Manufacturer: FTDI
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.2: SerialNumber: AC01R6P4
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Create Static Device Nodes in /dev...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Finished Create Static Device Nodes in /dev.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Preparation for Local File Systems.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-H.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-Hudson.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-P.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-S.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-T.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-U.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-W.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-cifs-X.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Set up automount mnt-nfs.automount.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.3: new full-speed USB device number 9 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Rule-based Manager for Device Events and Files...
Jan 16 08:05:25 pc-dada-01-linux systemd-udevd[460]: Using default interface naming scheme 'v255'.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Started Rule-based Manager for Device Events and Files.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting Network Configuration...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Found device /dev/disk/by-uuid/7e39a696-d80f-43d4-879b-de43b44b1424.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Found device /dev/disk/by-uuid/470323bc-b491-4c3e-ab0f-e87686b3be45.
Jan 16 08:05:25 pc-dada-01-linux lvm[514]: PV /dev/nvme1n1p5 online, VG lvm is complete.
Jan 16 08:05:25 pc-dada-01-linux lvm[514]: VG lvm finished
Jan 16 08:05:25 pc-dada-01-linux kernel: Consider using thermal netlink events interface
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Intel HID events as /devices/platform/INTC1070:00/input/input9
Jan 16 08:05:25 pc-dada-01-linux kernel: intel-hid INTC1070:00: platform supports 5 button array
Jan 16 08:05:25 pc-dada-01-linux kernel: input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input10
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.3: Product: FT232R USB UART
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.3: Manufacturer: FTDI
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.3: SerialNumber: AC01R6P6
Jan 16 08:05:25 pc-dada-01-linux kernel: ACPI: battery: new extension: Dell DDV Battery Extension
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Found device PC801 NVMe SK hynix 1TB fatty.
Jan 16 08:05:25 pc-dada-01-linux kernel: intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
Jan 16 08:05:25 pc-dada-01-linux kernel: idma64 idma64.0: Found Intel integrated DMA 64-bit
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[540]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4"
Jan 16 08:05:25 pc-dada-01-linux kernel: i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
Jan 16 08:05:25 pc-dada-01-linux kernel: i801_smbus 0000:00:1f.4: SPD Write Disable is set
Jan 16 08:05:25 pc-dada-01-linux kernel: i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Jan 16 08:05:25 pc-dada-01-linux kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan 16 08:05:25 pc-dada-01-linux kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jan 16 08:05:25 pc-dada-01-linux kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
Jan 16 08:05:25 pc-dada-01-linux kernel: spi-nor spi0.0: gd25q128 (16384 Kbytes)
Jan 16 08:05:25 pc-dada-01-linux kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Jan 16 08:05:25 pc-dada-01-linux kernel: cfg80211: failed to load regulatory.db
Jan 16 08:05:25 pc-dada-01-linux kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Jan 16 08:05:25 pc-dada-01-linux kernel: Creating 1 MTD partitions on "0000:00:1f.5":
Jan 16 08:05:25 pc-dada-01-linux kernel: 0x000000000000-0x000003000000 : "BIOS"
Jan 16 08:05:25 pc-dada-01-linux kernel: mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x1000000
Jan 16 08:05:25 pc-dada-01-linux kernel: spi-nor spi0.1: gd25q256 (32768 Kbytes)
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Activating swap /dev/disk/by-uuid/7e39a696-d80f-43d4-879b-de43b44b1424...
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[540]: bus: 2, device: 2 was not an MTP device
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting File System Check on /dev/disk/by-uuid/37e20dd0-16a5-4b24-8216-41dd29ad89a8...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Starting File System Check on /dev/disk/by-uuid/470323bc-b491-4c3e-ab0f-e87686b3be45...
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Activated swap /dev/disk/by-uuid/7e39a696-d80f-43d4-879b-de43b44b1424.
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Reached target Swaps.
Jan 16 08:05:25 pc-dada-01-linux kernel: Adding 33554428k swap on /dev/mapper/lvm-swap. Priority:-2 extents:1 across:33554428k SSDsc
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounting Temporary Directory /tmp...
Jan 16 08:05:25 pc-dada-01-linux kernel: e1000e: Intel(R) PRO/1000 Network Driver
Jan 16 08:05:25 pc-dada-01-linux kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Jan 16 08:05:25 pc-dada-01-linux kernel: e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Jan 16 08:05:25 pc-dada-01-linux kernel: i2c i2c-12: 2/4 memory slots populated (from DMI)
Jan 16 08:05:25 pc-dada-01-linux kernel: i2c i2c-12: Memory type 0x22 not supported yet, not instantiating SPD
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[558]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5"
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[558]: bus: 1, device: 2 was not an MTP device
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[559]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8"
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[560]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7"
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[559]: bus: 1, device: 4 was not an MTP device
Jan 16 08:05:25 pc-dada-01-linux mtp-probe[560]: bus: 1, device: 3 was not an MTP device
Jan 16 08:05:25 pc-dada-01-linux systemd[1]: Mounted Temporary Directory /tmp.
Jan 16 08:05:25 pc-dada-01-linux kernel: usb 1-9.4: new full-speed USB device number 10 using xhci_hcd
Jan 16 08:05:25 pc-dada-01-linux systemd-fsck[563]: home: sauber, 1935463/26738688 Dateien, 39698274/106953728 Blöcke
Jan 16 08:05:25 pc-dada-01-linux systemd-fsck[567]: fatty: sauber, 17033017/62513152 Dateien, 152677541/250050816 Blöcke
Jan 16 08:05:25 pc-dada-01-linux kernel: tg3 0000:02:00.0 eth0: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:f8
Jan 16 08:05:25 pc-dada-01-linux kernel: tg3 0000:02:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jan 16 08:05:25 pc-dada-01-linux kernel: tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jan 16 08:05:25 pc-dada-01-linux kernel: tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
Jan 16 08:05:25 pc-dada-01-linux kernel: mousedev: PS/2 mouse device common for all mice
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[581]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[581]: bus: 1, device: 6 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux kernel: proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
Jan 16 08:05:26 pc-dada-01-linux kernel: intel_rapl_msr: PL4 support detected.
Jan 16 08:05:26 pc-dada-01-linux kernel: intel_rapl_common: Found RAPL domain package
Jan 16 08:05:26 pc-dada-01-linux kernel: intel_rapl_common: Found RAPL domain core
Jan 16 08:05:26 pc-dada-01-linux kernel: intel_rapl_common: Found RAPL domain uncore
Jan 16 08:05:26 pc-dada-01-linux kernel: RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
Jan 16 08:05:26 pc-dada-01-linux kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Jan 16 08:05:26 pc-dada-01-linux kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
Jan 16 08:05:26 pc-dada-01-linux kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 eth1: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:f9
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2: enabling device (0000 -> 0002)
Jan 16 08:05:26 pc-dada-01-linux kernel: mc: Linux media interface: v0.10
Jan 16 08:05:26 pc-dada-01-linux kernel: cryptd: max_cpu_qlen set to 1000
Jan 16 08:05:26 pc-dada-01-linux kernel: iTCO_vendor_support: vendor-support=0
Jan 16 08:05:26 pc-dada-01-linux kernel: mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
Jan 16 08:05:26 pc-dada-01-linux kernel: input: Dell Privacy Driver as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/6932965F-1671-4CEB-B988-D3AB0A901919/input/input11
Jan 16 08:05:26 pc-dada-01-linux kernel: intel_rapl_common: Found RAPL domain package
Jan 16 08:05:26 pc-dada-01-linux kernel: input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
Jan 16 08:05:26 pc-dada-01-linux kernel: mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
Jan 16 08:05:26 pc-dada-01-linux kernel: bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished File System Check on /dev/disk/by-uuid/470323bc-b491-4c3e-ab0f-e87686b3be45.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: /etc/systemd/network/42-wand.network:2: Unknown key name 'name' in section 'Match', ignoring.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: /etc/systemd/network/42-wand.network: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add Name=* in the [Match] section.
Jan 16 08:05:26 pc-dada-01-linux kernel: iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
Jan 16 08:05:26 pc-dada-01-linux kernel: iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jan 16 08:05:26 pc-dada-01-linux kernel: AVX2 version of gcm_enc/dec engaged.
Jan 16 08:05:26 pc-dada-01-linux kernel: AES CTR mode by8 optimization enabled
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: lo: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: lo: Gained carrier
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: qbridge: netdev ready
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: tbridge: netdev ready
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: t2bridge: netdev ready
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: boxbridge: netdev ready
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: dnbridge: netdev ready
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: Enumeration completed
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: qbridge: Configuring with /etc/systemd/network/16-qbridge.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: tbridge: Configuring with /etc/systemd/network/18-tbridge.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: t2bridge: Configuring with /etc/systemd/network/19-t2bridge.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: boxbridge: Configuring with /etc/systemd/network/26-boxbridge.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: dnbridge: Configuring with /etc/systemd/network/31-dnbridge.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: qbridge: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: tbridge: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: t2bridge: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: boxbridge: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: dnbridge: Link UP
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 eth2: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:fa
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3: enabling device (0000 -> 0002)
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 eth3: Tigon3 [partno(647592-001) rev 5719001] (PCI Express) MAC address 28:80:23:b9:33:fb
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished File System Check on /dev/disk/by-uuid/37e20dd0-16a5-4b24-8216-41dd29ad89a8.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Network Configuration.
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: Product: FT232R USB UART
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: Manufacturer: FTDI
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: SerialNumber: AC01R6P8
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 eth4: (PCI Express:2.5GT/s:Width x1) cc:96:e5:09:e7:ea
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 eth4: Intel(R) PRO/1000 Network Connection
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 eth4: MAC: 15, PHY: 12, PBA No: FFFFFF-0FF
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 testlan: renamed from eth3
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[602]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10"
Jan 16 08:05:26 pc-dada-01-linux kernel: i8042: PNP: No PS/2 controller found.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Mounting /home...
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[602]: bus: 1, device: 6 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Mounting /mnt/data...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Virtual Console Setup...
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: eth3: Interface name change detected, renamed to testlan.
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 testlan2: renamed from eth1
Jan 16 08:05:26 pc-dada-01-linux kernel: EXT4-fs (dm-2): mounted filesystem 470323bc-b491-4c3e-ab0f-e87686b3be45 r/w with ordered data mode. Quota mode: none.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Mounted /home.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Mounted /mnt/data.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Local File Systems.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on System Extension Image Management (Varlink).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Rebuild Dynamic Linker Cache...
Jan 16 08:05:26 pc-dada-01-linux kernel: EXT4-fs (nvme0n1p1): mounted filesystem 37e20dd0-16a5-4b24-8216-41dd29ad89a8 r/w with ordered data mode. Quota mode: none.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Set Up Additional Binary Formats was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: eth1: Interface name change detected, renamed to testlan2.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Create Volatile Files and Directories...
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.0 wand: renamed from eth0
Jan 16 08:05:26 pc-dada-01-linux kernel: usbcore: registered new interface driver snd-usb-audio
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3246: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: inputs:
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
Jan 16 08:05:26 pc-dada-01-linux kernel: snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: eth0: Interface name change detected, renamed to wand.
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 tbox: renamed from eth2
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: new full-speed USB device number 11 using xhci_hcd
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Create Volatile Files and Directories.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: eth2: Interface name change detected, renamed to tbox.
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 lan: renamed from eth4
Jan 16 08:05:26 pc-dada-01-linux kernel: intel_tcc_cooling: TCC Offset locked
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: eth4: Interface name change detected, renamed to lan.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Virtual Console Setup.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: testlan2: Configuring with /etc/systemd/network/23-testlan2.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: tbox: Configuring with /etc/systemd/network/22-tbox.network.
Jan 16 08:05:26 pc-dada-01-linux kernel: t2bridge: port 1(testlan2) entered blocking state
Jan 16 08:05:26 pc-dada-01-linux kernel: t2bridge: port 1(testlan2) entered disabled state
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 testlan2: entered allmulticast mode
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.1 testlan2: entered promiscuous mode
Jan 16 08:05:26 pc-dada-01-linux kernel: boxbridge: port 1(tbox) entered blocking state
Jan 16 08:05:26 pc-dada-01-linux kernel: boxbridge: port 1(tbox) entered disabled state
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 tbox: entered allmulticast mode
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.2 tbox: entered promiscuous mode
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: Product: FT232R USB UART
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: Manufacturer: FTDI
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: SerialNumber: AC01R6P7
Jan 16 08:05:26 pc-dada-01-linux kernel: input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input13
Jan 16 08:05:26 pc-dada-01-linux kernel: input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card1/input14
Jan 16 08:05:26 pc-dada-01-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input15
Jan 16 08:05:26 pc-dada-01-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input16
Jan 16 08:05:26 pc-dada-01-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input17
Jan 16 08:05:26 pc-dada-01-linux kernel: input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input18
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: testlan: Configuring with /etc/systemd/network/21-testlan.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: testlan2: Link UP
Jan 16 08:05:26 pc-dada-01-linux kernel: tbridge: port 1(testlan) entered blocking state
Jan 16 08:05:26 pc-dada-01-linux kernel: tbridge: port 1(testlan) entered disabled state
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 testlan: entered allmulticast mode
Jan 16 08:05:26 pc-dada-01-linux kernel: tg3 0000:02:00.3 testlan: entered promiscuous mode
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: new full-speed USB device number 12 using xhci_hcd
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Rebuild Dynamic Linker Cache.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: lan: Configuring with /etc/systemd/network/20-lan.network.
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: tbox: Link UP
Jan 16 08:05:26 pc-dada-01-linux kernel: qbridge: port 1(lan) entered blocking state
Jan 16 08:05:26 pc-dada-01-linux kernel: qbridge: port 1(lan) entered disabled state
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 lan: entered allmulticast mode
Jan 16 08:05:26 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 lan: entered promiscuous mode
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: Product: FT232R USB UART
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: Manufacturer: FTDI
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: SerialNumber: AC01R6P5
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: testlan: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Load Kernel Module dm_mod...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Load Kernel Module loop...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Set Up Additional Binary Formats was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Rebuild Journal Catalog...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Network Name Resolution...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Network Time Synchronization...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Record System Boot/Shutdown in UTMP...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Load Kernel Module dm_mod.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: modprobe@loop.service: Deactivated successfully.
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.7: new high-speed USB device number 13 using xhci_hcd
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Load Kernel Module loop.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Rebuild Journal Catalog.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.7: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.7: Product: USB 2.0 Hub [MTT]
Jan 16 08:05:26 pc-dada-01-linux kernel: hub 1-9.7:1.0: USB hub found
Jan 16 08:05:26 pc-dada-01-linux kernel: hub 1-9.7:1.0: 7 ports detected
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[656]: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[657]: checking bus 1, device 10: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[655]: checking bus 1, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.6"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[654]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[656]: bus: 1, device: 7 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Update is Completed...
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[657]: bus: 1, device: 10 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[655]: bus: 1, device: 12 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[658]: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.5"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[654]: bus: 1, device: 8 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[658]: bus: 1, device: 11 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[659]: checking bus 1, device 9: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[659]: bus: 1, device: 9 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux kernel: usbcore: registered new interface driver ftdi_sio
Jan 16 08:05:26 pc-dada-01-linux kernel: usbserial: USB Serial support registered for FTDI USB Serial Device
Jan 16 08:05:26 pc-dada-01-linux kernel: ftdi_sio 1-9.1:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.1: Detected FT232R
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.1: FTDI USB Serial Device converter now attached to ttyUSB0
Jan 16 08:05:26 pc-dada-01-linux kernel: ftdi_sio 1-9.2:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.2: Detected FT232R
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.2: FTDI USB Serial Device converter now attached to ttyUSB1
Jan 16 08:05:26 pc-dada-01-linux kernel: ftdi_sio 1-9.3:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.3: Detected FT232R
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.3: FTDI USB Serial Device converter now attached to ttyUSB2
Jan 16 08:05:26 pc-dada-01-linux kernel: ftdi_sio 1-9.4:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: Detected FT232R
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.4: FTDI USB Serial Device converter now attached to ttyUSB3
Jan 16 08:05:26 pc-dada-01-linux kernel: ftdi_sio 1-9.5:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: Detected FT232R
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.5: FTDI USB Serial Device converter now attached to ttyUSB4
Jan 16 08:05:26 pc-dada-01-linux kernel: ftdi_sio 1-9.6:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: Detected FT232R
Jan 16 08:05:26 pc-dada-01-linux kernel: usb 1-9.6: FTDI USB Serial Device converter now attached to ttyUSB5
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[663]: checking bus 1, device 9: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[665]: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.5"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[663]: bus: 1, device: 9 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[664]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[665]: bus: 1, device: 11 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[668]: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[668]: bus: 1, device: 7 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[664]: bus: 1, device: 8 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[666]: checking bus 1, device 10: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[667]: checking bus 1, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.6"
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[666]: bus: 1, device: 10 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux mtp-probe[667]: bus: 1, device: 12 was not an MTP device
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: lan: Link UP
Jan 16 08:05:26 pc-dada-01-linux systemd-networkd[466]: qbridge: Gained carrier
Jan 16 08:05:26 pc-dada-01-linux kernel: qbridge: port 1(lan) entered blocking state
Jan 16 08:05:26 pc-dada-01-linux kernel: qbridge: port 1(lan) entered forwarding state
Jan 16 08:05:26 pc-dada-01-linux systemd-resolved[643]: Positive Trust Anchors:
Jan 16 08:05:26 pc-dada-01-linux systemd-resolved[643]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
Jan 16 08:05:26 pc-dada-01-linux systemd-resolved[643]: Negative trust anchors: home.arpa 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 170.0.0.192.in-addr.arpa 171.0.0.192.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa ipv4only.arpa corp home internal intranet lan local private test
Jan 16 08:05:26 pc-dada-01-linux systemd-resolved[643]: Using system hostname 'pc-dada-01-linux'.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Record System Boot/Shutdown in UTMP.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Network Time Synchronization.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Network Name Resolution.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Update is Completed.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Network.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Host and Network Name Lookups.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target System Initialization.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started CUPS Scheduler.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Daily Cleanup of Temporary Directories.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Path Units.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target System Time Set.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Refresh existing PGP keys of archlinux-keyring regularly.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Daily man-db regeneration.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started Daily verification of password and group files.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Timer Units.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on CUPS Scheduler.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on D-Bus System Message Bus Socket.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on libvirt legacy monolithic daemon socket.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on libvirt legacy monolithic daemon admin socket.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on libvirt legacy monolithic daemon read-only socket.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on libvirt locking daemon socket.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on libvirt logging daemon socket.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Listening on XVNC Server.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Socket Units.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting D-Bus System Message Bus...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: TPM2 PCR Barrier (Initialization) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:26 pc-dada-01-linux dbus-broker-launch[673]: Looking up NSS user entry for 'pulse'...
Jan 16 08:05:26 pc-dada-01-linux dbus-broker-launch[673]: NSS returned no entry for 'pulse'
Jan 16 08:05:26 pc-dada-01-linux dbus-broker-launch[673]: Invalid user-name in /usr/share/dbus-1/system.d/pulseaudio-system.conf +27: user="pulse"
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started D-Bus System Message Bus.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Reached target Basic System.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started ACPI event daemon.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Save/Restore Sound Card State...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Manage Sound Card State (restore and store) was skipped because of an unmet condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting CUPS Scheduler...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: SSH Key Generation was skipped because no trigger condition checks were met.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started OpenSSH Daemon.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting User Login Management...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Virtual Machine and Container Registration Service...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: TPM2 PCR Barrier (User) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Permit User Sessions...
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Starting Start the Windows 10 Partitions array...
Jan 16 08:05:26 pc-dada-01-linux dbus-broker-launch[673]: Ready
Jan 16 08:05:26 pc-dada-01-linux sshd[678]: Server listening on 0.0.0.0 port 22.
Jan 16 08:05:26 pc-dada-01-linux sshd[678]: Server listening on :: port 22.
Jan 16 08:05:26 pc-dada-01-linux systemd-logind[679]: New seat seat0.
Jan 16 08:05:26 pc-dada-01-linux systemd-logind[679]: Watching system buttons on /dev/input/event0 (Power Button)
Jan 16 08:05:26 pc-dada-01-linux systemd-logind[679]: Watching system buttons on /dev/input/event1 (Sleep Button)
Jan 16 08:05:26 pc-dada-01-linux systemd-logind[679]: Watching system buttons on /dev/input/event4 (Microsoft Microsoft Ergonomic Keyboard)
Jan 16 08:05:26 pc-dada-01-linux systemd-logind[679]: Watching system buttons on /dev/input/event9 (Intel HID 5 button array)
Jan 16 08:05:26 pc-dada-01-linux systemd-logind[679]: Watching system buttons on /dev/input/event8 (Intel HID events)
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Finished Save/Restore Sound Card State.
Jan 16 08:05:26 pc-dada-01-linux systemd[1]: Started User Login Management.
Jan 16 08:05:26 pc-dada-01-linux kernel: loop0: detected capacity change from 0 to 204800
Jan 16 08:05:26 pc-dada-01-linux kernel: loop1: detected capacity change from 0 to 2048
Jan 16 08:05:27 pc-dada-01-linux start-win-partitions[721]: mdadm: array /dev/md0 built and started.
Jan 16 08:05:27 pc-dada-01-linux kernel: md0: detected capacity change from 0 to 949424128
Jan 16 08:05:27 pc-dada-01-linux kernel: md0: p1 p2
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Finished Permit User Sessions.
Jan 16 08:05:27 pc-dada-01-linux kernel: qbridge: port 1(lan) entered disabled state
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Finished Start the Windows 10 Partitions array.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Started Virtual Machine and Container Registration Service.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Reached target Sound Card.
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: new full-speed USB device number 14 using xhci_hcd
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Starting libvirt legacy monolithic daemon...
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Starting Light Display Manager...
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Started CUPS Scheduler.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Started Light Display Manager.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Reached target User and Group Name Lookups.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Starting Accounts Service...
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Started libvirt legacy monolithic daemon.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Reached target Multi-User System.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Reached target Graphical Interface.
Jan 16 08:05:27 pc-dada-01-linux acpid[675]: starting up with netlink and the input layer
Jan 16 08:05:27 pc-dada-01-linux acpid[675]: 1 rule loaded
Jan 16 08:05:27 pc-dada-01-linux acpid[675]: waiting for events: event logging is off
Jan 16 08:05:27 pc-dada-01-linux acpid[675]: client connected from 750[0:0]
Jan 16 08:05:27 pc-dada-01-linux acpid[675]: 1 client rule loaded
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Starting Authorization Manager...
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: Product: FT232R USB UART
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: Manufacturer: FTDI
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: SerialNumber: AC01R6P3
Jan 16 08:05:27 pc-dada-01-linux kernel: ftdi_sio 1-9.7.1:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: Detected FT232R
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.1: FTDI USB Serial Device converter now attached to ttyUSB6
Jan 16 08:05:27 pc-dada-01-linux polkitd[782]: Started polkitd version 123
Jan 16 08:05:27 pc-dada-01-linux polkitd[782]: Loading rules from directory /etc/polkit-1/rules.d
Jan 16 08:05:27 pc-dada-01-linux polkitd[782]: Loading rules from directory /usr/share/polkit-1/rules.d
Jan 16 08:05:27 pc-dada-01-linux polkitd[782]: Finished loading, compiling and executing 7 rules
Jan 16 08:05:27 pc-dada-01-linux polkitd[782]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Started Authorization Manager.
Jan 16 08:05:27 pc-dada-01-linux accounts-daemon[751]: started daemon version 23.13.0
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Started Accounts Service.
Jan 16 08:05:27 pc-dada-01-linux systemd[1]: Startup finished in 12.827s (firmware) + 6.029s (loader) + 2.889s (kernel) + 3.020s (userspace) = 24.766s.
Jan 16 08:05:27 pc-dada-01-linux kernel: qemu-system-x86[802]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: new full-speed USB device number 15 using xhci_hcd
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: Product: FT232R USB UART
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: Manufacturer: FTDI
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: SerialNumber: AC01R6P1
Jan 16 08:05:27 pc-dada-01-linux kernel: ftdi_sio 1-9.7.2:1.0: FTDI USB Serial Device converter detected
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: Detected FT232R
Jan 16 08:05:27 pc-dada-01-linux kernel: usb 1-9.7.2: FTDI USB Serial Device converter now attached to ttyUSB7
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[812]: checking bus 1, device 15: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.7/1-9.7.2"
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[812]: bus: 1, device: 15 was not an MTP device
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[813]: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.7/1-9.7.1"
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[813]: bus: 1, device: 14 was not an MTP device
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[814]: checking bus 1, device 15: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.7/1-9.7.2"
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[814]: bus: 1, device: 15 was not an MTP device
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[815]: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.7/1-9.7.1"
Jan 16 08:05:27 pc-dada-01-linux mtp-probe[815]: bus: 1, device: 14 was not an MTP device
Jan 16 08:05:28 pc-dada-01-linux systemd-networkd[466]: qbridge: Lost carrier
Jan 16 08:05:28 pc-dada-01-linux systemd-networkd[466]: qbridge: DHCPv6 lease lost
Jan 16 08:05:28 pc-dada-01-linux kernel: tg3 0000:02:00.2 tbox: Link is up at 100 Mbps, full duplex
Jan 16 08:05:28 pc-dada-01-linux kernel: tg3 0000:02:00.2 tbox: Flow control is on for TX and on for RX
Jan 16 08:05:28 pc-dada-01-linux kernel: tg3 0000:02:00.2 tbox: EEE is disabled
Jan 16 08:05:28 pc-dada-01-linux kernel: boxbridge: port 1(tbox) entered blocking state
Jan 16 08:05:28 pc-dada-01-linux kernel: boxbridge: port 1(tbox) entered forwarding state
Jan 16 08:05:28 pc-dada-01-linux systemd-networkd[466]: tbox: Gained carrier
Jan 16 08:05:28 pc-dada-01-linux systemd-networkd[466]: boxbridge: Gained carrier
Jan 16 08:05:28 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:28 pc-dada-01-linux systemd-networkd[466]: qbridge: Gained IPv6LL
Jan 16 08:05:28 pc-dada-01-linux systemd-resolved[643]: Switching to fallback DNS server 1.1.1.1#cloudflare-dns.com.
Jan 16 08:05:28 pc-dada-01-linux lightdm[841]: pam_unix(lightdm-greeter:session): session opened for user lightdm(uid=972) by (uid=0)
Jan 16 08:05:28 pc-dada-01-linux systemd-logind[679]: New session c1 of user lightdm.
Jan 16 08:05:28 pc-dada-01-linux systemd[1]: Created slice User Slice of UID 972.
Jan 16 08:05:28 pc-dada-01-linux systemd[1]: Starting User Runtime Directory /run/user/972...
Jan 16 08:05:28 pc-dada-01-linux systemd[1]: Finished User Runtime Directory /run/user/972.
Jan 16 08:05:28 pc-dada-01-linux systemd[1]: Starting User Manager for UID 972...
Jan 16 08:05:28 pc-dada-01-linux dbus-broker-launch[673]: Activation request for 'org.freedesktop.home1' failed: The systemd unit 'dbus-org.freedesktop.home1.service' could not be found.
Jan 16 08:05:28 pc-dada-01-linux (systemd)[848]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[lightdm] ruser=[<unknown>] rhost=[<unknown>]
Jan 16 08:05:28 pc-dada-01-linux (systemd)[848]: pam_unix(systemd-user:session): session opened for user lightdm(uid=972) by lightdm(uid=0)
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Queued start job for default target Main User Target.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Created slice User Application Slice.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Reached target Paths.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Reached target Timers.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Starting D-Bus User Message Bus Socket...
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GnuPG network certificate management daemon.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GCR ssh-agent wrapper.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GNOME Keyring daemon.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GnuPG cryptographic agent and passphrase cache.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on GnuPG public key management service.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on p11-kit server.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on PipeWire Multimedia System Sockets.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on Sound System.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Listening on D-Bus User Message Bus Socket.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Reached target Sockets.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Reached target Basic System.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Reached target Main User Target.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Startup finished in 164ms.
Jan 16 08:05:28 pc-dada-01-linux systemd[1]: Started User Manager for UID 972.
Jan 16 08:05:28 pc-dada-01-linux systemd[1]: Started Session c1 of User lightdm.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Created slice User Core Session Slice.
Jan 16 08:05:28 pc-dada-01-linux systemd[848]: Starting D-Bus User Message Bus...
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Service file '/usr/share/dbus-1/services/org.xfce.Thunar.FileManager1.service' is not named after the D-Bus name 'org.freedesktop.FileManager1'.
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Service file '/usr/share/dbus-1/services/org.xfce.Tumbler.Cache1.service' is not named after the D-Bus name 'org.freedesktop.thumbnails.Cache1'.
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Service file '/usr/share/dbus-1/services/org.xfce.Tumbler.Manager1.service' is not named after the D-Bus name 'org.freedesktop.thumbnails.Manager1'.
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Service file '/usr/share/dbus-1/services/org.xfce.Tumbler.Thumbnailer1.service' is not named after the D-Bus name 'org.freedesktop.thumbnails.Thumbnailer1'.
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Policy to allow eavesdropping in /usr/share/dbus-1/session.conf +31: Eavesdropping is deprecated and ignored
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Policy to allow eavesdropping in /usr/share/dbus-1/session.conf +33: Eavesdropping is deprecated and ignored
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Started D-Bus User Message Bus.
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[860]: Ready
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Starting Accessibility services bus...
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Started Accessibility services bus.
Jan 16 08:05:29 pc-dada-01-linux at-spi-bus-launcher[868]: Policy to allow eavesdropping in /usr/share/defaults/at-spi2/accessibility.conf +15: Eavesdropping is deprecated and ignored
Jan 16 08:05:29 pc-dada-01-linux at-spi-bus-launcher[868]: Policy to allow eavesdropping in /usr/share/defaults/at-spi2/accessibility.conf +17: Eavesdropping is deprecated and ignored
Jan 16 08:05:29 pc-dada-01-linux dbus-broker-launch[868]: Ready
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Starting Virtual filesystem service...
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Started Virtual filesystem service.
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Created slice Slice /app/dbus-:1.4-org.a11y.atspi.Registry.
Jan 16 08:05:29 pc-dada-01-linux systemd[848]: Started dbus-:1.4-org.a11y.atspi.Registry@0.service.
Jan 16 08:05:29 pc-dada-01-linux at-spi2-registryd[902]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 16 08:05:29 pc-dada-01-linux systemd-networkd[466]: boxbridge: Gained IPv6LL
Jan 16 08:05:29 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:30 pc-dada-01-linux kernel: e1000e 0000:00:1f.6 lan: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jan 16 08:05:30 pc-dada-01-linux kernel: qbridge: port 1(lan) entered blocking state
Jan 16 08:05:30 pc-dada-01-linux kernel: qbridge: port 1(lan) entered forwarding state
Jan 16 08:05:30 pc-dada-01-linux systemd-networkd[466]: lan: Gained carrier
Jan 16 08:05:30 pc-dada-01-linux systemd-networkd[466]: qbridge: Gained carrier
Jan 16 08:05:30 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:30 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:30 pc-dada-01-linux kernel: tg3 0000:02:00.3 testlan: Link is up at 1000 Mbps, full duplex
Jan 16 08:05:30 pc-dada-01-linux kernel: tg3 0000:02:00.3 testlan: Flow control is on for TX and on for RX
Jan 16 08:05:30 pc-dada-01-linux kernel: tg3 0000:02:00.3 testlan: EEE is enabled
Jan 16 08:05:30 pc-dada-01-linux kernel: tbridge: port 1(testlan) entered blocking state
Jan 16 08:05:30 pc-dada-01-linux kernel: tbridge: port 1(testlan) entered forwarding state
Jan 16 08:05:30 pc-dada-01-linux systemd-networkd[466]: testlan: Gained carrier
Jan 16 08:05:30 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:30 pc-dada-01-linux systemd-networkd[466]: tbridge: Gained carrier
Jan 16 08:05:30 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:30 pc-dada-01-linux systemd-networkd[466]: tbridge: DHCPv4 address 172.16.10.10/21 acquired from 172.16.13.1
Jan 16 08:05:30 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:30 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:31 pc-dada-01-linux systemd-networkd[466]: tbridge: Gained IPv6LL
Jan 16 08:05:31 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:36 pc-dada-01-linux systemd-networkd[466]: qbridge: DHCPv4 address 172.16.2.2/22, gateway 172.16.0.250 acquired from 172.16.1.100
Jan 16 08:05:36 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:36 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:36 pc-dada-01-linux systemd-timesyncd[644]: Network configuration changed, trying to establish connection.
Jan 16 08:05:48 pc-dada-01-linux acpid[675]: client 750[0:0] has disconnected
Jan 16 08:05:52 pc-dada-01-linux acpid[675]: client connected from 750[0:0]
Jan 16 08:05:52 pc-dada-01-linux acpid[675]: 1 client rule loaded
Jan 16 08:06:07 pc-dada-01-linux systemd-timesyncd[644]: Contacted time server 156.106.214.48:123 (2.ch.pool.ntp.org).
Jan 16 08:06:07 pc-dada-01-linux systemd-timesyncd[644]: Initial clock synchronization to Tue 2024-01-16 08:06:06.947018 CET.
Jan 16 08:07:27 pc-dada-01-linux systemd[1]: libvirtd.service: Deactivated successfully.
Jan 16 08:08:24 pc-dada-01-linux sshd[921]: Accepted password for david from fe80::a245:b2eb:1502:f33f%qbridge port 49841 ssh2
Jan 16 08:08:24 pc-dada-01-linux sshd[921]: pam_unix(sshd:session): session opened for user david(uid=1000) by david(uid=0)
Jan 16 08:08:24 pc-dada-01-linux systemd-logind[679]: New session 2 of user david.
Jan 16 08:08:24 pc-dada-01-linux systemd[1]: Created slice User Slice of UID 1000.
Jan 16 08:08:24 pc-dada-01-linux systemd[1]: Starting User Runtime Directory /run/user/1000...
Jan 16 08:08:24 pc-dada-01-linux systemd[1]: Finished User Runtime Directory /run/user/1000.
Jan 16 08:08:24 pc-dada-01-linux systemd[1]: Starting User Manager for UID 1000...
Jan 16 08:08:24 pc-dada-01-linux (systemd)[925]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[david] ruser=[<unknown>] rhost=[<unknown>]
Jan 16 08:08:24 pc-dada-01-linux (systemd)[925]: pam_unix(systemd-user:session): session opened for user david(uid=1000) by david(uid=0)
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Queued start job for default target Main User Target.
Jan 16 08:08:24 pc-dada-01-linux systemd-journald[411]: /var/log/journal/47620932ff694cd5908f9c8c47e2a15b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Created slice User Application Slice.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Reached target Paths.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Reached target Timers.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Starting D-Bus User Message Bus Socket...
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GnuPG network certificate management daemon.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GCR ssh-agent wrapper.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GNOME Keyring daemon.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GnuPG cryptographic agent and passphrase cache.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on GnuPG public key management service.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on p11-kit server.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on PipeWire Multimedia System Sockets.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on Sound System.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Listening on D-Bus User Message Bus Socket.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Reached target Sockets.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Reached target Basic System.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Reached target Main User Target.
Jan 16 08:08:24 pc-dada-01-linux systemd[925]: Startup finished in 208ms.
Jan 16 08:08:24 pc-dada-01-linux systemd[1]: Started User Manager for UID 1000.
Jan 16 08:08:24 pc-dada-01-linux systemd[1]: Started Session 2 of User david.
Jan 16 08:08:32 pc-dada-01-linux sudo[1067]: david : TTY=pts/0 ; PWD=/home/david ; USER=root ; COMMAND=/usr/bin/su -
Jan 16 08:08:32 pc-dada-01-linux sudo[1067]: pam_unix(sudo:session): session opened for user root(uid=0) by david(uid=1000)
Jan 16 08:08:32 pc-dada-01-linux su[1069]: (to root) root on pts/1
Jan 16 08:08:32 pc-dada-01-linux su[1069]: pam_unix(su-l:session): session opened for user root(uid=0) by david(uid=0)Offline
#2 2024-01-16 15:36:43
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,732
- Website
Re: Blank screen with newer kernels, no luck with downgrading anymore
janoschz wrote:
I was able to work around it by downgrading the kernel and using an lts kernel instead
Sounds like a kernel regression. You can try a bisect to narrow down the bad commit(s) and then report them upstream.
Offline
#3 2024-01-16 15:42:56
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
If it was the kernel only I would be able to downgrade to the same previously used kernel and I would get the displays back. Unfortunately this is not possible. Even though I reinstalled the same kernel as before (the one that was working) the monitors stay black (well, blank, since the backlight is still on). I guess there is something in combination with mesa / kernel / xorg...
Offline
#4 2024-01-16 15:47:43
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,325
Re: Blank screen with newer kernels, no luck with downgrading anymore
LTS is at 6.6 now.
Try to add "initcall_blacklist=simpledrm_platform_driver_init" to the https://wiki.archlinux.org/title/Kernel … mmand_line
Edit: and probably https://wiki.archlinux.org/title/Kernel … _KMS_start
Last edited by seth (2024-01-16 15:50:22)
Offline
#5 2024-01-16 15:58:02
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
Oh I was wrong, I fiddled with the wrong kernel, downgrading to 6.4.12-arch1-1 fixes the issue again. So I should be able to bisect the issue.
Thanks, I'll try the `initcall_blacklist` item.
Offline
#6 2024-01-16 16:21:39
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
Using `initcall_blacklist=simpledrm_platform_driver_init` seems to have no effect. Since I changed one of the monitors I realized that using the most recent kernel also gives the issue that the resolution of the other monitor is not correctly detected. There must be an issue regarding the "communication" of the graphics card (`Intel Corporation AlderLake-S GT1`) with the monitors.
Figuring out what change caused this takes a very long time I guess. I would need to compile every commit to the kernel that affected the intel driver, boot every compilation and check whether the monitors work. Is there another way?
Offline
#7 2024-01-16 16:53:05
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,325
Re: Blank screen with newer kernels, no luck with downgrading anymore
https://wiki.archlinux.org/title/Bisect … s_with_Git
Did you enable early KMS?
Please post an updated system journal for the boot:
sudo journalctl -b | curl -F 'file=@-' 0x0.stYou can also try to throw
i915.enable_fbc=0 i915.enable_psr=0 i915.enable_dc=0 i915.fastboot=0at the system.
Offline
#8 2024-01-16 18:26:55
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,378
Re: Blank screen with newer kernels, no luck with downgrading anymore
If it helps https://drive.google.com/drive/folders/ … sp=sharing contains some bisection kernels for 6.4 to 6.5 from https://bbs.archlinux.org/viewtopic.php … 7#p2121427
Offline
#9 2024-01-17 07:08:19
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
Thank you guys! I will try out when I am on site again, hopefully tomorrow.
Offline
#10 2024-01-18 08:46:11
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
Ok, the part with
i915.enable_fbc=0 i915.enable_psr=0 i915.enable_dc=0 i915.fastboot=0didn't produce any difference. There was a message that said that the parameter
i915.fastbootis unknown. I guess this has been removed.
In order to bisect the kernel, which one should I use? linux-git from AUR? Is this the one the official arch-linux kernel is derived from?
Offline
#11 2024-01-18 09:44:41
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,378
Re: Blank screen with newer kernels, no luck with downgrading anymore
I would suggest using https://gitlab.archlinux.org/archlinux/ … 48e3a28194 adjusted to add a pkgver function, use the source from kernel.org mainline and not build the documentation. I can provide you with such a source bundle if it helps.
By the way how many of the kernels from https://drive.google.com/drive/folders/ … sp=sharing were you able to reuse?
Last edited by loqs (2024-01-18 10:10:26)
Offline
#12 2024-01-18 09:51:48
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,325
Re: Blank screen with newer kernels, no luck with downgrading anymore
Also
seth wrote:
Did you enable early KMS?
Please post an updated system journal for the boot:
Offline
#13 2024-01-18 10:05:39
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
True, I didn't test the provided kernels - since I am running 6.4.12 currently that does not have the graphics bug I will try the 6.5 version, I'll report back very soon.
Yes, I am using kms - this is the default though anyway (since some time) but I set this explicitly in mkinitcpio.conf:
HOOKS=(base udev autodetect modconf block lvm2 filesystems keyboard fsck kms)I will provide the updated journal with the next attempt to boot another kernel.
Thanks for your time you all!
Last edited by janoschz (2024-01-18 10:05:55)
Offline
#14 2024-01-18 10:17:09
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
I just booted 6.5.0-1.1 from the GDrive folder you provided. There is a difference regarding the "other" monitor - whereas all other kernels that (also) fail to drive the Philips 242S also initially drive the otherwise working monitor with the wrong resolution. This 6.5.0-1.1 starts the otherwise correctly working monitor initially with the correct resolution.
Nevertheless this kernel unfortunately also does not drive the Philips 242S (it is recognized, the monitor is active, meaning it recognizes input but stays black).
Updated journal log: http://0x0.st/H0Og.txt
Offline
#15 2024-01-18 10:31:43
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,378
Re: Blank screen with newer kernels, no luck with downgrading anymore
janoschz wrote:
True, I didn't test the provided kernels - since I am running 6.4.12 currently that does not have the graphics bug I will try the 6.5 version, I'll report back very soon.
I would suggest you make these changes to https://gitlab.archlinux.org/archlinux/ … 48e3a28194
diff --git a/PKGBUILD b/PKGBUILD
index 7fe7502..f6ecb7f 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -1,11 +1,10 @@
# Maintainer: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
pkgbase=linux
-pkgver=6.5.arch1
+pkgver=6.5
pkgrel=1
pkgdesc='Linux'
-_srctag=v${pkgver%.*}-${pkgver##*.}
-url="https://github.com/archlinux/linux/commits/$_srctag"
+url="https://www.kernel.org/"
arch=(x86_64)
license=(GPL2)
makedepends=(
@@ -19,17 +18,11 @@ makedepends=(
python
tar
xz
-
- # htmldocs
- graphviz
- imagemagick
- python-sphinx
- texlive-latexextra
)
options=('!strip')
-_srcname=archlinux-linux
+_srcname=linux
source=(
- "$_srcname::git+https://github.com/archlinux/linux?signed#tag=$_srctag"
+ "$_srcname::git+https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git#tag=v6.5?signed"
config # the main kernel config file
)
validpgpkeys=(
@@ -77,10 +70,15 @@ prepare() {
echo "Prepared $pkgbase version $(<version)"
}
+pkgver() {
+ cd $_srcname
+
+ git describe | sed -E 's/^v//;s/([^-]*-g)/r\1/;s/-/./g;s/\.rc/rc/'
+}
+
build() {
cd $_srcname
_make all
- _make htmldocs
}
_package() {
@@ -227,7 +225,6 @@ _package-docs() {
pkgname=(
"$pkgbase"
"$pkgbase-headers"
- "$pkgbase-docs"
)
for _p in "${pkgname[@]}"; do
eval "package_$_p() {PKGBUILD with the suggested changes applied:
https://drive.google.com/file/d/1kVsb62 … sp=sharing linux-6.5-1.src.tar.gz
Edit:
$ cd src/linux/
$ git bisect start
status: waiting for both good and bad commits
$ git bisect bad v6.5
status: waiting for good commit(s), bad commit known
$ git bisect good v6.4
Bisecting: 7364 revisions left to test after this (roughly 13 steps)
[b775d6c5859affe00527cbe74263de05cfe6b9f9] Merge tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
$ git describe
v6.4-7309-gb775d6c5859aWhich is where the b775d6c5859a in linux-6.4.r7309.gb775d6c5859a-1-x86_64.pkg.tar comes from.
Last edited by loqs (2024-01-18 11:45:02)
Offline
#16 2024-01-18 11:03:00
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,325
Re: Blank screen with newer kernels, no luck with downgrading anymore
Do you have journals from the older kernel?
Are mei_pxp and mei_hdcp in use there as well?
module_blacklist=mei_pxpmodule_blacklist=mei_hdcpmodule_blacklist=mei_pxp,mei_hdcpAlso cc. add "initcall_blacklist=simpledrm_platform_driver_init" to the https://wiki.archlinux.org/title/Kernel … mmand_line
Offline
#17 2024-01-18 12:08:59
- janoschz
- Member
- Registered: 2015-10-06
- Posts: 19
Re: Blank screen with newer kernels, no luck with downgrading anymore
Thanks again, I tried blacklisting either mei_pxp, mei_hdcp or both and I tried with initcall_blacklist=simpledrm_platform_driver_init, all the same, nothing changes concerning the displays. Unfortunately I don't have any older journals.
I also tried the latest vanilla kernel from the stable linux repo, to no avail. Currently I am running 6.4.12-arch1-1 that does not have this problem but it cannot insert the cifs module (handle_bug+0x3c/0x80, report_bug+0x171/0x1a0...). So I am kind of stuck, either monitors don't work or I don't have any net drives (I can mount them with fuse though but that's a pita).
I have to go back to work now, I will investigate further when I have more time. Thanks for your efforts!
Offline