You are not logged in.

#1 2024-03-16 15:20:10

Vertin
Member
Registered: 2024-03-16
Posts: 1

[SOLVED]My Laptop Resumed Immediately After Suspend

Hi, I'm new here.
My laptop is ASUS ProArt Studiobook 2023, with the 13980HX CPU and a RTX 4070 Max-Q. I have just executed "sudo pacman -Syyu", the system is up-to-date.
Every time I press the power button or click on the Plasma's Sleep button, my laptop goes to sleep but wake up almost immediately. I have tried to enable or disable nvidia-resume, nvidia-suspend, nvidia-persistenced and nvidia-hibernate services in systemctl, but I can't find a way out.
My kernel parameter in

/etc/default/grub

GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 splash lsm=landlock,yama,integrity,apparmor,bpf nvidia_drm.modeset=1 NVreg_PreserveVideoMemoryAllocations=1"

.
My /etc/mkinitcpio.conf only included the btrfs module.
Here is my log by executing

sudo journalctl -b
Mar 16 22:42:04 Vertin-Arch-ASUS systemd-logind[820]: Power key pressed short.
Mar 16 22:42:04 Vertin-Arch-ASUS systemd-logind[820]: The system will suspend now!
Mar 16 22:42:04 Vertin-Arch-ASUS systemd[1]: Reached target Sleep.
Mar 16 22:42:04 Vertin-Arch-ASUS systemd[1]: Starting System Suspend...
Mar 16 22:42:04 Vertin-Arch-ASUS systemd-sleep[9505]: Performing sleep operation 'suspend'...
Mar 16 22:42:04 Vertin-Arch-ASUS kernel: PM: suspend entry (s2idle)
Mar 16 22:42:04 Vertin-Arch-ASUS kernel: Filesystems sync: 0.002 seconds
Mar 16 22:42:04 Vertin-Arch-ASUS kwin_wayland[3001]: kwin_wayland_drm: atomic commit failed: Permission denied
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: Freezing user space processes
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: Freezing user space processes completed (elapsed 0.001 seconds)
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: OOM killer disabled.
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: Freezing remaining freezable tasks
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Asserting Reset
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: intel-hid INTC1078:00: failed to get button capability
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: r8169 0000:6e:00.0 eno2: Link is Down
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: ACPI: EC: interrupt blocked
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: ACPI: EC: interrupt unblocked
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: intel-hid INTC1078:00: failed to get button capability
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: r8169 0000:6e:00.0 eno2: Link is Down
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware version: 3
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431f1f.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431f1f-l0.bin: v0.43.1
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\2023Projects\W7604\TuningRelease\12232022\W7604_tooling_samples_Lch_tuning_ID_RTL_DBE6dB_CF200.bin
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware version: 3
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431f1f.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431f1f-r0.bin: v0.43.1
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\2023Projects\W7604\TuningRelease\12232022\W7604_tooling_samples_Rch_tuning_ID_RTL_DBE6dB_CF200.bin
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 5
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.20.0
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: OOM killer enabled.
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: Restarting tasks ... done.
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: random: crng reseeded on system resumption
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: snapperd.service: Deactivated successfully.
Mar 16 22:42:09 Vertin-Arch-ASUS systemd-sleep[9505]: System returned from sleep operation 'suspend'.
Mar 16 22:42:09 Vertin-Arch-ASUS kernel: PM: suspend exit
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: systemd-suspend.service: Deactivated successfully.
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: Finished System Suspend.
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: Stopped target Sleep.
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: Reached target Suspend.
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: Starting To set battery charge threshold...
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: Stopped target Suspend.
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: battery-manager.service: Deactivated successfully.
Mar 16 22:42:09 Vertin-Arch-ASUS kwin_wayland[3001]: kwin_core: parsing edid failed
Mar 16 22:42:09 Vertin-Arch-ASUS kwin_wayland[3001]: kwin_wayland_drm: Couldn't parse EDID for connector DrmConnector(id=236, gpu=KWin::DrmGpu(0x64bb8926e820), name="eDP-1-unknown", connection="Connected", countMode=3)
Mar 16 22:42:09 Vertin-Arch-ASUS systemd[1]: Finished To set battery charge threshold.
Mar 16 22:42:10 Vertin-Arch-ASUS systemd-logind[820]: Operation 'suspend' finished.
Mar 16 22:42:11 Vertin-Arch-ASUS kwin_wayland_wrapper[3072]: [dix] couldn't enable device 11
Mar 16 22:42:11 Vertin-Arch-ASUS kwin_wayland_wrapper[3072]: [dix] couldn't enable device 12
Mar 16 22:42:11 Vertin-Arch-ASUS kwin_wayland_wrapper[3072]: [dix] couldn't enable device 13
Mar 16 22:42:11 Vertin-Arch-ASUS wireplumber[2951]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner
Mar 16 22:42:11 Vertin-Arch-ASUS wireplumber[2951]: <WpPortalPermissionStorePlugin:0x5637e59f1b30> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Mar 16 22:42:11 Vertin-Arch-ASUS wireplumber[2951]: <WpPortalPermissionStorePlugin:0x5637e59f1b30> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Mar 16 22:42:13 Vertin-Arch-ASUS kscreenlocker_greet[9473]: qt.qpa.wayland: Could not create EGL surface (EGL error 0x3000)
Mar 16 22:42:13 Vertin-Arch-ASUS kscreenlocker_greet[9473]: Failed to write to the pipe: Bad file descriptor.
Mar 16 22:42:20 Vertin-Arch-ASUS sudo[9922]:   vertin : TTY=pts/1 ; PWD=/home/vertin ; USER=root ; COMMAND=/usr/bin/journalctl -b

I tried several times but can't figure it out, if you need more info, please comment below. Sorry for my newbie-ish post, your reply will be appreciated.

Edited the next day
It turns out that the issue is caused by the USB wireless receiver of my mouse.

cat /proc/acpi/wakeup | grep enabled

And the solution is https://wiki.archlinux.org/title/Power_ … om_suspend

Last edited by Vertin (2024-03-17 03:27:58)

Offline

Board footer

Powered by FluxBB