You are not logged in.

Pages: 1

#1 2024-03-25 19:36:42

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

[Solved] Screen(s) found, but none have a usable config. amdgpu

Hi.

Since yesterday's update I have no output in my two display port connected monitors.

I boot directly into console (no login manager) and usually start my bspwm session through xinit, although have also installed Plasma and Gnome Desktop environments.

AMD Ryzen 7 5700X
Radeon RX 6600
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M] (rev c7)
amdgpu

I can SSH to the machine.

So far, I've tried downgrading some suspicious packages, reconnecting display ports, disabling ErP Ready in BIOS, trimming to minimum the xorg.conf.d/ file, reinstalling amdgpu, mkinitcpio, grub rebuild, booting with amdgpu.ppfeaturemask=0xffffffff...

Below are the logs, steps and config files, but relevant bits (to me at least) are:
/var/log/Xorg.0.log

(EE) AMDGPU(0): No modes.
(EE) Screen(s) found, but none have a usable configuration.
(EE) no screens found(EE)

¿Any help or tip?

Thank you.

The last upgrade before the problem

[2024-03-24T15:49:36+0100] [PACMAN] Running 'pacman -Syu'
[2024-03-24T15:49:36+0100] [PACMAN] synchronizing package lists
[2024-03-24T15:49:37+0100] [PACMAN] starting full system upgrade
[2024-03-24T15:49:45+0100] [ALPM] running '71-dkms-remove.hook'...
[2024-03-24T15:49:46+0100] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod v4l2loopback/0.12.7 -k 6.6.22-1-lts
[2024-03-24T15:49:47+0100] [ALPM-SCRIPTLET] ==> depmod 6.6.22-1-lts
[2024-03-24T15:49:48+0100] [ALPM] transaction started
[2024-03-24T15:49:48+0100] [ALPM] upgraded adwaita-cursors (45.0-1 -> 46.0-1)
[2024-03-24T15:49:48+0100] [ALPM] upgraded libsysprof-capture (45.2-1 -> 46.0-1)
[2024-03-24T15:49:48+0100] [ALPM] upgraded util-linux-libs (2.39.3-2 -> 2.40rc2-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded glib2 (2.78.4-1 -> 2.80.0-2)
[2024-03-24T15:49:49+0100] [ALPM] upgraded librsvg (2:2.57.3-1 -> 2:2.58.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded gtk-update-icon-cache (1:4.12.5-1 -> 1:4.14.1-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded adwaita-icon-theme (45.0-1 -> 46.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded alsa-card-profiles (1:1.0.4-1 -> 1:1.0.4-2)
[2024-03-24T15:49:49+0100] [ALPM] upgraded gsettings-desktop-schemas (45.0-1 -> 46.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded util-linux (2.39.3-2 -> 2.40rc2-1)
[2024-03-24T15:49:49+0100] [ALPM] installed libei (1.2.1-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded at-spi2-core (2.50.2-1 -> 2.52.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded gstreamer (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:49+0100] [ALPM] upgraded gst-plugins-base-libs (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:49+0100] [ALPM] upgraded glib-networking (1:2.78.1-1 -> 1:2.80.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded gvfs (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:49+0100] [ALPM] upgraded tracker3 (3.6.0-3 -> 3.7.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded evince (45.0-1 -> 46.0-1)
[2024-03-24T15:49:49+0100] [ALPM] upgraded gst-plugins-bad-libs (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded gtk4 (1:4.12.5-1 -> 1:4.14.1-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded libadwaita (1:1.4.4-1 -> 1:1.5.0-1)
[2024-03-24T15:49:50+0100] [ALPM] installed libnautilus-extension (46.0-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded libpipewire (1:1.0.4-1 -> 1:1.0.4-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded pipewire (1:1.0.4-1 -> 1:1.0.4-2)
[2024-03-24T15:49:50+0100] [ALPM] installed libportal-gtk4 (0.7.1-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded file-roller (43.1-1 -> 44beta-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded fwupd-efi (1.5-1 -> 1.5-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded fzf (0.48.0-1 -> 0.48.1-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded lib32-util-linux (2.39.3-1 -> 2.40rc2-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded lib32-glib2 (2.78.4-1 -> 2.80.0-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded libgirepository (1.78.1-1 -> 1.80.0-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded gobject-introspection-runtime (1.78.1-1 -> 1.80.0-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded gjs (2:1.78.4-1 -> 2:1.80.1-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded glib2-docs (2.78.4-1 -> 2.80.0-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded glibmm (2.66.6-1 -> 2.66.7-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded glibmm-2.68 (2.78.1-1 -> 2.80.0-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded webkit2gtk-4.1 (2.42.5-2 -> 2.44.0-1)
[2024-03-24T15:49:50+0100] [ALPM] upgraded vte-common (0.74.2-1 -> 0.76.0-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded vte3 (0.74.2-1 -> 0.76.0-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded gst-plugins-base (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:50+0100] [ALPM] upgraded gst-plugins-good (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-boxes (45.0-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gtksourceview5 (5.10.0-1 -> 5.12.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-calculator (45.0.2-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-characters (45.0-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded vte4 (0.74.2-1 -> 0.76.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-console (45.0-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-font-viewer (45.0-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-terminal (3.50.1-1 -> 3.52.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnome-text-editor (45.3-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gtkmm-4.0 (4.12.0-1 -> 4.14.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gnote (45.1-1 -> 46.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded python-markupsafe (2.1.4-1 -> 2.1.5-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gobject-introspection (1.78.1-1 -> 1.80.0-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded graphicsmagick (1.3.42-3 -> 1.3.43-1)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gst-libav (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gst-plugin-gtk (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gst-plugins-bad (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gst-plugins-ugly (1.24.1-1 -> 1.24.1-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-afc (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded libgoa (3.48.1-1 -> 3.50.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-goa (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-google (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-gphoto2 (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-mtp (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-nfs (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:51+0100] [ALPM] upgraded gvfs-smb (1.52.2-2 -> 1.54.0-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded qt5-base (5.15.13+kde+r138-1 -> 5.15.13+kde+r142-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded krdc (24.02.1-1 -> 24.02.1-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded lazygit (0.40.2-1 -> 0.41.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded lib32-at-spi2-core (2.50.2-1 -> 2.52.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded lib32-librsvg (2:2.57.3-1 -> 2:2.58.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded libgedit-gtksourceview (299.0.5-1 -> 299.1.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded lsd (1.1.0-1 -> 1.1.1-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded pipewire-audio (1:1.0.4-1 -> 1:1.0.4-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded pipewire-alsa (1:1.0.4-1 -> 1:1.0.4-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded pipewire-pulse (1:1.0.4-1 -> 1:1.0.4-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded python-gobject (3.46.0-1 -> 3.48.1-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded python-google-api-core (2.17.1-1 -> 2.18.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded python-google-api-python-client (2.122.0-1 -> 2.123.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded redland (1:1.0.17-8 -> 1:1.0.17-9)
[2024-03-24T15:49:52+0100] [ALPM] upgraded remmina (1:1.4.35-1 -> 1:1.4.35-2)
[2024-03-24T15:49:52+0100] [ALPM] upgraded streamlink (6.7.1-1 -> 6.7.2-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded tepl (1:6.8.0-3 -> 1:6.9.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded v4l2loopback-dkms (0.12.7-2 -> 0.13.1-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded webkit2gtk (2.42.5-2 -> 2.44.0-1)
[2024-03-24T15:49:52+0100] [ALPM] upgraded xf86-input-evdev (2.10.6-3 -> 2.10.6-4)
[2024-03-24T15:49:53+0100] [ALPM] transaction completed
[2024-03-24T15:49:53+0100] [ALPM] running '20-systemd-sysusers.hook'...
[2024-03-24T15:49:53+0100] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2024-03-24T15:49:54+0100] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2024-03-24T15:49:54+0100] [ALPM] running '30-systemd-tmpfiles.hook'...
[2024-03-24T15:49:54+0100] [ALPM] running '30-systemd-udev-reload.hook'...
[2024-03-24T15:49:54+0100] [ALPM] running '30-systemd-update.hook'...
[2024-03-24T15:49:54+0100] [ALPM] running '30-update-mime-database.hook'...
[2024-03-24T15:49:55+0100] [ALPM] running '70-dkms-install.hook'...
[2024-03-24T15:49:55+0100] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.13.1 -k 6.8.1-arch1-1
[2024-03-24T15:49:58+0100] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.13.1 -k 6.6.22-1-lts
[2024-03-24T15:50:01+0100] [ALPM-SCRIPTLET] ==> depmod 6.6.22-1-lts
[2024-03-24T15:50:01+0100] [ALPM-SCRIPTLET] ==> depmod 6.8.1-arch1-1
[2024-03-24T15:50:04+0100] [ALPM] running '90-mkinitcpio-install.hook'...
[2024-03-24T15:50:04+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2024-03-24T15:50:04+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T15:50:04+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -g /boot/initramfs-linux-lts.img
[2024-03-24T15:50:04+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.6.22-1-lts'
[2024-03-24T15:50:04+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T15:50:04+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T15:50:05+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T15:50:06+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T15:50:06+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T15:50:06+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-lts.img'
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.6.22-1-lts'
[2024-03-24T15:50:08+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T15:50:09+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T15:50:09+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T15:50:09+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T15:50:09+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T15:50:09+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2024-03-24T15:50:10+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2024-03-24T15:50:11+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2024-03-24T15:50:12+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T15:50:12+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T15:50:13+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T15:50:13+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T15:50:16+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T15:50:16+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-lts-fallback.img'
[2024-03-24T15:50:16+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.8.1-arch1-1'
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T15:50:18+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T15:50:19+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T15:50:21+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T15:50:21+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2024-03-24T15:50:21+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux-fallback.img -S autodetect
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.8.1-arch1-1'
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T15:50:22+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T15:50:23+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T15:50:23+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T15:50:23+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T15:50:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2024-03-24T15:50:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2024-03-24T15:50:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2024-03-24T15:50:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2024-03-24T15:50:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2024-03-24T15:50:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2024-03-24T15:50:25+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T15:50:26+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T15:50:26+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T15:50:27+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T15:50:30+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T15:50:30+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2024-03-24T15:50:30+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T15:50:31+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T15:50:31+0100] [ALPM] running '90-packagekit-refresh.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running '90-qt5-styleplugins.hook'...
[2024-03-24T15:50:32+0100] [ALPM-SCRIPTLET] [WARNING] qt5-base was updated, qt5 applications will break until qt5-styleplugins is rebuilt.
[2024-03-24T15:50:32+0100] [ALPM] running 'detect-old-perl-modules.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running 'gdk-pixbuf-query-loaders-32.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running 'gio-querymodules.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running 'glib-compile-schemas.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running 'gtk-update-icon-cache.hook'...
[2024-03-24T15:50:32+0100] [ALPM] running 'gtk4-querymodules.hook'...
[2024-03-24T15:50:33+0100] [ALPM] running 'gvfsd.hook'...
[2024-03-24T15:50:33+0100] [ALPM] running 'update-desktop-database.hook'...
[2024-03-24T15:50:33+0100] [ALPM] running 'vimdoc.hook'...

Try to downgrade

downgraded xf86-input-evdev (2.10.6-4 -> 2.10.6-3)
downgraded util-linux-libs (2.40rc2-1 -> 2.39.3-2)
downgraded util-linux (2.40rc2-1 -> 2.39.3-2)

That triggered the MOUNT_2_40 problem

gdbus: /usr/lib/libmount.so.1: version `MOUNT_2_40' not found (required by /usr/lib/libgio-2.0.so.0)

downgraded v4l2loopback-dkms (0.13.1-1 -> 0.12.7-2) 

[2024-03-24T19:02:26+0100] [ALPM] running '70-dkms-install.hook'...
[2024-03-24T19:02:26+0100] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.12.7 -k 6.8.1-arch1-1
[2024-03-24T19:02:28+0100] [ALPM-SCRIPTLET] Error! Bad return status for module build on kernel: 6.8.1-arch1-1 (x86_64)
[2024-03-24T19:02:28+0100] [ALPM-SCRIPTLET] Consult /var/lib/dkms/v4l2loopback/0.12.7/build/make.log for more information.
[2024-03-24T19:02:28+0100] [ALPM-SCRIPTLET] ==> WARNING: `dkms install --no-depmod v4l2loopback/0.12.7 -k 6.8.1-arch1-1' exited 10
[2024-03-24T19:02:28+0100] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.12.7 -k 6.6.22-1-lts
[2024-03-24T19:02:31+0100] [ALPM-SCRIPTLET] ==> depmod 6.6.22-1-lts
[2024-03-24T19:02:31+0100] [ALPM] running '90-mkinitcpio-install.hook'...
[2024-03-24T19:02:31+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2024-03-24T19:02:31+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T19:02:31+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -g /boot/initramfs-linux-lts.img
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.6.22-1-lts'
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T19:02:32+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T19:02:33+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T19:02:33+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T19:02:33+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T19:02:33+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T19:02:35+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T19:02:35+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-lts.img'
[2024-03-24T19:02:35+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.6.22-1-lts'
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T19:02:36+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T19:02:37+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T19:02:37+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T19:02:37+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T19:02:37+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T19:02:38+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2024-03-24T19:02:38+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2024-03-24T19:02:38+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2024-03-24T19:02:38+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2024-03-24T19:02:38+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2024-03-24T19:02:38+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2024-03-24T19:02:39+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T19:02:40+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T19:02:40+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T19:02:41+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T19:02:44+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T19:02:44+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-lts-fallback.img'
[2024-03-24T19:02:44+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T19:02:45+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T19:02:45+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2024-03-24T19:02:45+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T19:02:45+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
[2024-03-24T19:02:45+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.8.1-arch1-1'
[2024-03-24T19:02:45+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T19:02:46+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T19:02:47+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T19:02:47+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T19:02:47+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T19:02:47+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux-fallback.img -S autodetect
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET] ==> Starting build: '6.8.1-arch1-1'
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-03-24T19:02:49+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-03-24T19:02:50+0100] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-03-24T19:02:50+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-03-24T19:02:50+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-03-24T19:02:50+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2024-03-24T19:02:51+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2024-03-24T19:02:52+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2024-03-24T19:02:53+0100] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2024-03-24T19:02:53+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-03-24T19:02:54+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-03-24T19:02:54+0100] [ALPM-SCRIPTLET]   -> Running build hook: [shutdown]
[2024-03-24T19:02:57+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-03-24T19:02:58+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2024-03-24T19:02:58+0100] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-03-24T19:02:59+0100] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-03-24T19:02:59+0100] [ALPM] running '90-packagekit-refresh.hook'...
[2024-03-24T19:02:59+0100] [ALPM-SCRIPTLET] gdbus: /usr/lib/libmount.so.1: version `MOUNT_2_40' not found (required by /usr/lib/libgio-2.0.so.0)

So... some more downgrade

downgraded glib2 (2.80.0-2 -> 2.78.4-1)
downgraded lib32-util-linux (2.40rc2-1 -> 2.39.3-1)
downgraded lib32-glib2 (2.80.0-1 -> 2.78.4-1)
downgraded glibmm-2.68 (2.80.0-1 -> 2.78.1-1)
downgraded prrte (3.0.5-1 -> 3.0.4-3)
downgraded openmpi (5.0.2-7 -> 5.0.2-6)

Then, try to replace installed zenpower3-dkms from AUR with zenpower3-dkms-git. I know... I was lost at this point.

[2024-03-24T19:26:30+0100] [PACMAN] Running '/usr/bin/pacman -U /home/bolorino/.trizen/zenpower3-dkms-git/zenpower3-dkms-git-69.c176fdb-1-x86_64.pkg.tar.zst'

Trying to reinstall linux-firmware and amd-ucode

[2024-03-24T20:24:33+0100] [PACMAN] Running 'pacman -S linux-firmware amd-ucode'

As nothing wordked, back to latest versions

[2024-03-24T20:43:50+0100] [PACMAN] Running 'pacman -Syu'
[2024-03-24T20:43:50+0100] [PACMAN] synchronizing package lists
[2024-03-24T20:43:51+0100] [PACMAN] starting full system upgrade
[2024-03-24T20:44:30+0100] [PACMAN] Running 'pacman -Syu'
[2024-03-24T20:44:30+0100] [PACMAN] synchronizing package lists
[2024-03-24T20:44:31+0100] [PACMAN] starting full system upgrade
[2024-03-24T20:44:34+0100] [ALPM] running '71-dkms-remove.hook'...
[2024-03-24T20:44:34+0100] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod v4l2loopback/0.12.7 -k 6.6.22-1-lts
[2024-03-24T20:44:35+0100] [ALPM-SCRIPTLET] ==> depmod 6.6.22-1-lts
[2024-03-24T20:44:37+0100] [ALPM] transaction started
[2024-03-24T20:44:37+0100] [ALPM] upgraded util-linux-libs (2.39.3-2 -> 2.40rc2-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded glib2 (2.78.4-1 -> 2.80.0-2)
[2024-03-24T20:44:37+0100] [ALPM] upgraded alacritty (0.13.1-1 -> 0.13.2-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded glibmm-2.68 (2.78.1-1 -> 2.80.0-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded lib32-util-linux (2.39.3-1 -> 2.40rc2-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded lib32-glib2 (2.78.4-1 -> 2.80.0-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded libpciaccess (0.18-1 -> 0.18.1-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded prrte (3.0.4-3 -> 3.0.5-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded openmpi (5.0.2-6 -> 5.0.2-7)
[2024-03-24T20:44:37+0100] [ALPM] upgraded util-linux (2.39.3-2 -> 2.40rc2-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded v4l2loopback-dkms (0.12.7-2 -> 0.13.1-1)
[2024-03-24T20:44:37+0100] [ALPM] upgraded xf86-input-evdev (2.10.6-3 -> 2.10.6-4)
[2024-03-24T20:44:37+0100] [ALPM] transaction completed

GRUB

# GRUB boot loader configuration

GRUB_DEFAULT='Opciones avanzadas para Arch Linux>Arch Linux, con Linux linux'
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="root=/dev/Arch/root loglevel=3 quiet"
GRUB_CMDLINE_LINUX="intremap=off splash"
#GRUB_CMDLINE_LINUX="amdgpu.audio=0 video=DP-1:2560x1440@75 amdgpu.ppfeaturemask=0xffffffff"

GRUB_DISABLE_OS_PROBER=false

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos lvm"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=2560x1440x32

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-blue/black"
GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
GRUB_THEME="/boot/grub/themes/Xenlism-Arch/theme.txt"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"

I've tried booting with amdgpu.ppfeaturemask=0xffffffff getting the value with 

printf 'amdgpu.ppfeaturemask=0x%x\n' "$(($(cat /sys/module/amdgpu/parameters/ppfeaturemask) | 0x4000))"

No luck.

/etc/modprobe.d/amdgpu.conf

blacklist radeon
blacklist fglrx
options amdgpu audio=0 dc=0 video=DP-1:2560x1440@75

The video option is no longer recognized, but I haven't had any issues with it:

amdgpu: unknown parameter 'video' ignored

Tried a minimal xorg.conf just with

Section "Device"
        Identifier "AMD GPU"
        Driver "amdgpu"
        Option "TearFree" "off"
        Option "VariableRefresh" "true"
EndSection

Same result.

My regular xorg.confs

/etc/X11/xorg.conf.d/90-monitor.conf

Section "Monitor"
        Identifier "DisplayPort-0"
        Modeline "2560x1440_240"  586.00  2560 2568 2600 2640  1440 1465 1473 1543 +hsync -vsync
        Option "PreferredMode" "2560x1440_240"
EndSection
Section "Monitor"
        Identifier "DisplayPort-1"
        Modeline "2560x1440_75.00_rb2"  295.42  2560 2568 2600 2640  1440 1478 1486 1492 +hsync -vsync
        Modeline "2560x1440_75.00"  299.00  2560 2608 2640 2720  1440 1443 1448 1470 +hsync -vsync
        Option "PreferredMode" "2560x1440_75.00"
EndSection

Section "Device"
        Identifier "AMD GPU"
        Driver "amdgpu"
        Option "TearFree" "off"
        Option "VariableRefresh" "true"
EndSection

/etc/X11/xorg.conf.d/99-modesetting.conf

Section "Device"
        Identifier "force modesetting"
        Driver "modesetting"
EndSection

/var/log/Xorg.0.log

[    92.158] (--) Log file renamed from "/var/log/Xorg.pid-1110.log" to "/var/log/Xorg.0.log"
[    92.158]
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[    92.158] Current Operating System: Linux trantor 6.8.1-arch1-1 #1 SMP PREEMPT_DYNAMIC Sat, 16 Mar 2024 17:15:35 +0000 x86_64
[    92.158] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/Arch-root rw intremap=off splash button.lid_init_state=open root=/dev/Arch/root loglevel=3 quiet
[    92.159]
[    92.159] Current version of pixman: 0.43.4
[    92.159]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    92.159] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    92.159] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 25 00:34:01 2024
[    92.159] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    92.159] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    92.159] (==) No Layout section.  Using the first Screen section.
[    92.159] (==) No screen section available. Using defaults.
[    92.159] (**) |-->Screen "Default Screen Section" (0)
[    92.159] (**) |   |-->Monitor "<default monitor>"
[    92.159] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    92.159] (**) |   |-->Device "AMD GPU"
[    92.159] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    92.159] (==) Automatically adding devices
[    92.159] (==) Automatically enabling devices
[    92.159] (==) Automatically adding GPU devices
[    92.159] (==) Automatically binding GPU devices
[    92.159] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    92.159] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    92.160]    Entry deleted from font path.
[    92.160] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    92.160]    Entry deleted from font path.
[    92.160] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    92.160]    Entry deleted from font path.
[    92.160] (==) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/OTF
[    92.160] (==) ModulePath set to "/usr/lib/xorg/modules"
[    92.160] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    92.160] (II) Module ABI versions:
[    92.160]    X.Org ANSI C Emulation: 0.4
[    92.160]    X.Org Video Driver: 25.2
[    92.160]    X.Org XInput driver : 24.4
[    92.160]    X.Org Server Extension : 10.0
[    92.160] (++) using VT number 2

[    92.160] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    92.160] (II) xfree86: Adding drm device (/dev/dri/card1)
[    92.160] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.0/drm/card1
[    92.165] (--) PCI:*(7@0:0:0) 1002:73ff:1da2:e447 rev 199, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfc000000/1048576, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[    92.165] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    92.165] (II) LoadModule: "glx"
[    92.165] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    92.166] (II) Module glx: vendor="X.Org Foundation"
[    92.166]    compiled for 1.21.1.11, module version = 1.0.0
[    92.166]    ABI class: X.Org Server Extension, version 10.0
[    92.166] (II) LoadModule: "amdgpu"
[    92.166] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    92.166] (II) Module amdgpu: vendor="X.Org Foundation"
[    92.166]    compiled for 1.21.1.7, module version = 23.0.0
[    92.166]    Module class: X.Org Video Driver
[    92.166]    ABI class: X.Org Video Driver, version 25.2
[    92.166] (II) AMDGPU: Driver for AMD Radeon:
        All GPUs supported by the amdgpu kernel driver
[    92.168] (II) AMDGPU(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    92.168] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    92.168] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    92.168] (==) AMDGPU(0): Default visual is TrueColor
[    92.168] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1
[    92.168] (**) AMDGPU(0): Option "TearFree" "off"
[    92.168] (**) AMDGPU(0): Option "VariableRefresh" "true"
[    92.168] (==) AMDGPU(0): RGB weight 888
[    92.168] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    92.168] (--) AMDGPU(0): Chipset: "AMD Radeon RX 6600" (ChipID = 0x73ff)
[    92.168] (II) Loading sub module "fb"
[    92.168] (II) LoadModule: "fb"
[    92.168] (II) Module "fb" already built-in
[    92.168] (II) Loading sub module "dri2"
[    92.168] (II) LoadModule: "dri2"
[    92.168] (II) Module "dri2" already built-in
[    92.185] (II) Loading sub module "glamoregl"
[    92.185] (II) LoadModule: "glamoregl"
[    92.185] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    92.188] (II) Module glamoregl: vendor="X.Org Foundation"
[    92.188]    compiled for 1.21.1.11, module version = 1.0.1
[    92.188]    ABI class: X.Org ANSI C Emulation, version 0.4
[    92.196] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX 6600 (radeonsi, navi23, LLVM 17.0.6, DRM 3.57, 6.8.1-arch1-1)
[    92.196] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    92.196] (**) AMDGPU(0): TearFree property default: off
[    92.196] (**) AMDGPU(0): VariableRefresh: enabled
[    92.196] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[    92.196] (II) AMDGPU(0): KMS Pageflipping: enabled
[    92.196] (WW) AMDGPU(0): No outputs definitely connected, trying again...
[    92.196] (WW) AMDGPU(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[    92.196] (II) AMDGPU(0): mem size init: gart size :3e72fb000 vram size: s:1fcb18000 visible:fe29000
[    92.196] (==) AMDGPU(0): DPI set to (96, 96)
[    92.196] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    92.196] (II) Loading sub module "ramdac"
[    92.196] (II) LoadModule: "ramdac"
[    92.196] (II) Module "ramdac" already built-in
[    92.196] (EE) AMDGPU(0): No modes.
[    92.197] (II) UnloadModule: "amdgpu"
[    92.197] (II) UnloadSubModule: "glamoregl"
[    92.197] (II) Unloading glamoregl
[    92.197] (EE) Screen(s) found, but none have a usable configuration.
[    92.197] (EE)
Fatal server error:
[    92.197] (EE) no screens found(EE)
[    92.197] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[    92.197] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    92.197] (EE)
[    92.197] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[    92.197] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[    92.197] (WW) xf86OpenConsole: VT_GETSTATE failed: Input/output error
[    92.197] (EE) Server terminated with error (1). Closing log file.

lspci

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:05.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B]
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B]
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 7
01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse Switch Upstream
03:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO
05:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev
c7)
06:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M
] (rev c7)
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
08:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
09:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 03)
0a:00.0 Audio device: Creative Labs CA0132 Sound Core3D [Sound Blaster Recon3D / Z-Series / Sound BlasterX AE-5
 Plus] (rev 01)
0b:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP
0b:00.1 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
0b:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
0c:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
0d:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
0e:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Fu
nction
0f:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP
0f:00.1 Encryption controller: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PS
PCPP
0f:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller

amdgpu related logs

dmesg | grep amd 
[    0.695651] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.761246] amd_pstate: driver load is disabled, boot with specific mode to enable this
[    2.452574] amdgpu: unknown parameter 'video' ignored
[    2.453055] [drm] amdgpu kernel modesetting enabled.
[    2.453148] amdgpu: Virtual CRAT table created for CPU
[    2.453158] amdgpu: Topology: Add CPU node
[    2.460812] amdgpu 0000:06:00.0: No more image in the PCI ROM
[    2.460825] amdgpu 0000:06:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    2.460827] amdgpu: ATOM BIOS: 113-2447LHM-WD1
[    2.497341] amdgpu 0000:06:00.0: vgaarb: deactivate vga console
[    2.497344] amdgpu 0000:06:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default
)
[    2.497369] amdgpu 0000:06:00.0: amdgpu: PCIE atomic ops is not supported
[    2.497410] amdgpu 0000:06:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
[    2.497413] amdgpu 0000:06:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    2.497541] [drm] amdgpu: 8176M of VRAM memory ready
[    2.497543] [drm] amdgpu: 16000M of GTT memory ready.
[    6.107487] amdgpu 0000:06:00.0: amdgpu: STB initialized to 2048 entries
[    6.107896] amdgpu 0000:06:00.0: amdgpu: Will use PSP to load VCN firmware
[    6.277447] amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    6.295101] amdgpu 0000:06:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    6.295130] amdgpu 0000:06:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013,
 smu fw program = 0, version = 0x003b3100 (59.49.0)
[    6.295133] amdgpu 0000:06:00.0: amdgpu: SMU driver if version not matched
[    6.295177] amdgpu 0000:06:00.0: amdgpu: use vbios provided pptable
[    6.349565] amdgpu 0000:06:00.0: amdgpu: SMU is initialized successfully!
[    6.402085] amdgpu: HMM registered 8176MB device memory
[    6.403250] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    6.403258] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[    6.403463] amdgpu: Virtual CRAT table created for GPU
[    6.403634] amdgpu: Topology: Add dGPU node [0x73ff:0x1002]
[    6.403636] kfd kfd: amdgpu: added device 1002:73ff
[    6.403661] amdgpu 0000:06:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 28
[    6.403664] amdgpu 0000:06:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[    6.403665] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    6.403667] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    6.403668] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    6.403669] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    6.403670] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    6.403671] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    6.403672] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    6.403674] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    6.403675] amdgpu 0000:06:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[    6.403676] amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[    6.403677] amdgpu 0000:06:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[    6.403678] amdgpu 0000:06:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
[    6.403679] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
[    6.403680] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
[    6.403682] amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8
[    6.404906] amdgpu 0000:06:00.0: amdgpu: Using BACO for runtime pm
[    6.404982] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:06:00.0 on minor 1
[    7.954760] kvm_amd: TSC scaling supported
[    7.954762] kvm_amd: Nested Virtualization enabled
[    7.954762] kvm_amd: Nested Paging enabled
[    7.954769] kvm_amd: Virtual VMLOAD VMSAVE supported
[    7.954769] kvm_amd: Virtual GIF supported
[    7.954770] kvm_amd: LBR virtualization supported
[  438.708228] amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
[  438.725775] amdgpu 0000:06:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[  438.725777] amdgpu 0000:06:00.0: amdgpu: SMU is resuming...
[  438.725781] amdgpu 0000:06:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013,
 smu fw program = 0, version = 0x003b3100 (59.49.0)
[  438.725784] amdgpu 0000:06:00.0: amdgpu: SMU driver if version not matched
[  438.734708] amdgpu 0000:06:00.0: amdgpu: SMU is resumed successfully!
[  438.741006] amdgpu 0000:06:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[  438.741007] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[  438.741008] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[  438.741009] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[  438.741010] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[  438.741011] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[  438.741012] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[  438.741013] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[  438.741014] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[  438.741015] amdgpu 0000:06:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[  438.741016] amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[  438.741017] amdgpu 0000:06:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[  438.741018] amdgpu 0000:06:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
[  438.741018] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
[  438.741019] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
[  438.741020] amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8
[  438.890927] amdgpu 0000:06:00.0: amdgpu: MODE1 reset
[  438.890932] amdgpu 0000:06:00.0: amdgpu: GPU mode1 reset
[  438.891666] amdgpu 0000:06:00.0: amdgpu: GPU smu mode1 reset
[  440.280606] amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
[  440.297980] amdgpu 0000:06:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[  440.297982] amdgpu 0000:06:00.0: amdgpu: SMU is resuming...
[  440.297987] amdgpu 0000:06:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013,
 smu fw program = 0, version = 0x003b3100 (59.49.0)
[  440.297990] amdgpu 0000:06:00.0: amdgpu: SMU driver if version not matched
[  440.298058] amdgpu 0000:06:00.0: amdgpu: use vbios provided pptable
[  440.355344] amdgpu 0000:06:00.0: amdgpu: SMU is resumed successfully!
[  440.362003] amdgpu 0000:06:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[  440.362004] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[  440.362006] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[  440.362007] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[  440.362007] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[  440.362008] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[  440.362009] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[  440.362010] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[  440.362011] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[  440.362012] amdgpu 0000:06:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[  440.362013] amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[  440.362014] amdgpu 0000:06:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[  440.362015] amdgpu 0000:06:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
[  440.362016] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
[  440.362017] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
[  440.362018] amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8

Last edited by bolorino (2024-03-26 14:15:38)

Improve my english... Work in progress

Offline

#2 2024-03-26 10:46:47

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,766

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Drop all of your xorg confs, let autodetect figure it out, and recheck with xrandr whether your monitors got renamed (... can happen on kernel/xf86-video-amdgpu updates)

Last edited by V1del (2024-03-26 10:47:43)

Offline

#3 2024-03-26 12:12:25

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Thank you V1del.

I don't even have monitors detected in tty, before X, but the possible change of output names is a good clue.

I've tried removing x settings, and -blindly- launch xinit script. No luck. Same "Screen(s) found, but none have a usable configuration." in Xorg.0.log.

But I took a look to the EDID entry in wiki and found that I have no edid under sys/class/drm/*/ so it seems something is wrong with edid.

Improve my english... Work in progress

Offline

#4 2024-03-26 13:14:31

seth
Member
Registered: 2012-09-03
Posts: 51,630

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

options amdgpu audio=0 dc=0 video=DP-1:2560x1440@75

Remove that, add "initcall_blacklist=simpledrm_platform_driver_init" to the https://wiki.archlinux.org/title/Kernel_parameters and post an updated xorg log and a complete system journal.

LTS and 6.8 are both affected?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2024-03-26 13:17:00

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Thanks seth,
just tried removing the kernel params and booted with initcall_blacklist=simpledrm_platform_driver_init.
Same result.

The same problem is present booting the LTS kernel.

Improve my english... Work in progress

Offline

#6 2024-03-26 13:27:07

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Oh, something new.

Following the seth's advice and booting into the 6.6.22-1 kernel I have a console :-)

And xinit also works!

Improve my english... Work in progress

Offline

#7 2024-03-26 13:32:52

seth
Member
Registered: 2012-09-03
Posts: 51,630

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

So it's most likely a 6.8 regression (and you won't have to test "nomodeset")

sudo journalctl -b -1 | curl -F 'file=@-' 0x0.st

for the previous boot.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2024-03-26 13:40:46

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Well.
Both monitors are visible in tty, but the second one doesn't show in X.

I have a lots of 

[   119.654] (WW) AMDGPU(0): flip queue failed: Invalid argument
[   119.654] (WW) AMDGPU(0): Page flip failed: Invalid argument
[   119.654] (EE) AMDGPU(0): present flip failed

in .local/share/xorg/Xorg.0.log

Tried to boot again into 6.8.1-arch1-1 and got the same: both monitors visible in tty, but the second one doesn't show in X.

The outputs that weren't available before in sys/class/drm are present now:

$ ls -l /sys/class/drm
total 0
lrwxrwxrwx 1 root root    0 mar 26 14:35 card0 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/card0
lrwxrwxrwx 1 root root    0 mar 26 14:35 card0-DP-1 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/card0/card0-DP-1
lrwxrwxrwx 1 root root    0 mar 26 14:35 card0-DP-2 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/card0/card0-DP-2
lrwxrwxrwx 1 root root    0 mar 26 14:35 card0-DP-3 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/card0/card0-DP-3
lrwxrwxrwx 1 root root    0 mar 26 14:35 card0-HDMI-A-1 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/card0/card0-HDMI-A-1
lrwxrwxrwx 1 root root    0 mar 26 14:35 card0-Writeback-1 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/card0/card0-Writeback-1
lrwxrwxrwx 1 root root    0 mar 26 14:35 renderD128 -> ../../devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/drm/renderD128

Improve my english... Work in progress

Offline

#9 2024-03-26 13:43:02

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

seth wrote:

So it's most likely a 6.8 regression (and you won't have to test "nomodeset")

sudo journalctl -b -1 | curl -F 'file=@-' 0x0.st

for the previous boot.

I did a -b -2 because a booted again before reading your message:

journal log

Improve my english... Work in progress

Offline

#10 2024-03-26 13:50:07

seth
Member
Registered: 2012-09-03
Posts: 51,630

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Tried to boot again into 6.8.1-arch1-1 and got the same: both monitors visible in tty, but the second one doesn't show in X.

With tha development your xorg log just became more interesting tongue
Did you check "xrandr -q" for whether the second output is actually there but just not activated?
Are the outputs daisy-chained ("PC -> Monitor1 -> Monitor2" rather than "Monitor1 <- PC -> Monitor2")?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2024-03-26 14:08:30

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

seth wrote:

With tha development your xorg log just became more interesting tongue

smile

seth wrote:

Did you check "xrandr -q" for whether the second output is actually there but just not activated?

Both monitors seems to be there

Screen 0: minimum 320 x 200, current 2560 x 1440, maximum 16384 x 16384
DisplayPort-0 connected primary (normal left inverted right x axis y axis)
   2560x1440_240 143.86 +
   2560x1440     59.95 +  74.78    72.04    60.00    50.01    48.00
   1920x1200     59.88
   1920x1080     60.00    60.00    50.00    59.94
   1600x1200     59.95
   1680x1050     59.95
   1280x1024     75.02    69.95    60.02
   1440x900      59.89
   1280x800      59.95
   1152x864      75.00
   1280x720      60.00    50.00    59.94
   1024x768      75.03    70.07    60.00
   832x624       74.55
   800x600       72.19    75.00    60.32
   720x576       50.00
   720x480       60.00    59.94
   640x480       75.00    72.81    66.67    60.00    59.94
   720x400       70.08
DisplayPort-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm
   2560x1440_75.00  74.78*+
   2560x1440    239.76 + 164.68 +  59.95 + 143.86   120.00    70.00
   1920x1080    239.76 + 120.00   119.88    60.00    60.00    50.00    59.94
   2560x1440_75.00_rb2  75.00
   1920x1200     59.88
   1600x1200     60.00
   1680x1050     59.95
   1600x900      60.00
   1280x1024     75.02
   1440x900      59.89
   1280x800      59.81
   1280x720      60.00    50.00    59.94
   1024x768      75.03    60.00
   800x600       75.00    60.32
   720x576       50.00
   720x480       60.00    59.94
   640x480       75.00    60.00    59.94
   720x400       70.08
DisplayPort-2 disconnected (normal left inverted right x axis y axis)
HDMI-A-0 disconnected (normal left inverted right x axis y axis)

I tried to reconnect the second one (DisplayPort-1).

Also launched arandr. Both monitor are shown, but the DisplayPort-1 is grayed, although marked as "active". Trying to apply the config returns 

XrandR returned error code 1: 'xranrdr: Configure crtc 0 failed'
seth wrote:

Are the outputs daisy-chained ("PC -> Monitor1 -> Monitor2" rather than "Monitor1 <- PC -> Monitor2")?

Each monitor is connected to a different display port into the card, so I think, the second? smile

Improve my english... Work in progress

Offline

#12 2024-03-26 14:13:07

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

Well, I launched plasma and got both monitors working.

So it has to be related to the naming of monitors and the bspwm config. I will address that later.

Thank you very much smile

Is the initcall_blacklist=simpledrm_platform_driver_init boot param sort of a permanent solution?
Do you know if it has side effects?

Improve my english... Work in progress

Offline

#13 2024-03-26 14:20:57

seth
Member
Registered: 2012-09-03
Posts: 51,630

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

It disables the simpledrm device that you don't want to use anyway (it mostly exists because wayland doesn't work w/o drm and ubuntu and fedora users cannot fix their system w/o a GUI tongue)
You can try to re-allow it and see whether it was related at all.

The explicit 75Hz modes are deliberate and unrelated?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#14 2024-03-26 14:42:26

bolorino
Member
From: Spain
Registered: 2013-06-17
Posts: 18
Website

Re: [Solved] Screen(s) found, but none have a usable config. amdgpu

seth wrote:

It disables the simpledrm device that you don't want to use anyway (it mostly exists because wayland doesn't work w/o drm and ubuntu and fedora users cannot fix their system w/o a GUI tongue)
You can try to re-allow it and see whether it was related at all.

Ja! Great then.

seth wrote:

The explicit 75Hz modes are deliberate and unrelated?

Deliberated smile
The first monitor is an HP Omen 240Hz and the second a Lenovo capable of 75Hz, so I have each one with its corresponding refresh rate and working fine.

Thank you very much one more time for your help cool

Improve my english... Work in progress

Offline

Pages: 1

Board footer

Powered by FluxBB