[SOLVED] New kernel(s) breaks bluetooth on my system.

Maurizio Ferreira · 2024-04-12 12:14:07

On my system, starting from kernel 6.7.7.arch1-1, new kernel versions break bluetooth functions.
Before those, Bluetooth worked perfectly.
This is particulary annoying since now I have to connect an usb keyboard instead of using the (preferred) bluetooth one.

I've tried several new version until today, when I decided to signal the problem.
I've seen the followig error in the dmesg output.

[ 12.091036] Bluetooth: hci0: command 0xfc20 tx timeout
[ 12.091070] Bluetooth: hci0: RTL: download fw command failed (-110)

Here is the working (6.7.6-arch1-2) dmesg

[    0.000000] Linux version 6.7.6-arch1-2 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Thu, 29 Feb 2024 19:08:51 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=PARTUUID=671d634f-f4cb-47e7-831d-78e4331ce909 rw loglevel=3 quiet fbcon=rotate:1 acpi_osi=Linux
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000077a2dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077a2e000-0x0000000077a33fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077a34000-0x0000000077a3cfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000077a3d000-0x0000000077afffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077b00000-0x000000007bb9bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bb9c000-0x000000007bdbbfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdbc000-0x000000007bdbcfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bdbd000-0x000000007bdbdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdbe000-0x000000007bdbffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bdc0000-0x000000007bdc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdc1000-0x000000007c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007ccc0fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ccc1000-0x000000007cd1ffff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007cd20000-0x000000007cd47fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cd48000-0x000000007cdb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007cdb8000-0x000000007cdf7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007cdf8000-0x000000007cdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.4 by INSYDE Corp.
[    0.000000] efi: ACPI 2.0=0x7cdf7014 ESRT=0x77abef10 SMBIOS=0x7bd72000 
[    0.000000] efi: Not removing mem41: MMIO range=[0xe00f8000-0xe00f8fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem42: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
[    0.000000] efi: Remove mem43: MMIO range=[0xffd00000-0xffffffff] (3MB) from e820 map
[    0.000000] e820: remove [mem 0xffd00000-0xffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ONDA ONDA Tablet/ONDA Tablet, BIOS ONDA.B.D86CJUBNRBA02 08/26/2015
[    0.000000] tsc: Detected 1333.333 MHz processor
[    0.000026] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000040] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000071] last_pfn = 0x7ce00 max_arch_pfn = 0x400000000
[    0.000087] MTRR map: 7 entries (2 fixed + 5 variable; max 18), built from 8 variable MTRRs
[    0.000095] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.010285] esrt: Reserving ESRT space from 0x0000000077abef10 to 0x0000000077abef48.
[    0.012154] Secure boot disabled
[    0.012157] RAMDISK: [mem 0x35b5f000-0x36da6fff]
[    0.012174] ACPI: Early table checksum verification disabled
[    0.012183] ACPI: RSDP 0x000000007CDF7014 000024 (v02 INSYDE)
[    0.012199] ACPI: XSDT 0x000000007CDD0188 0000D4 (v01 INSYDE INSYDE   00000003      01000013)
[    0.012219] ACPI: FACP 0x000000007CDF1000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012241] ACPI: DSDT 0x000000007CDDD000 00EE1E (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012258] ACPI: UEFI 0x000000007CDF6000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012274] ACPI: MSDM 0x000000007CDF5000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012289] ACPI: UEFI 0x000000007CDF4000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.012304] ACPI: OEM0 0x000000007CDF3000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012319] ACPI: DBG2 0x000000007CDF2000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012334] ACPI: HPET 0x000000007CDF0000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012349] ACPI: LPIT 0x000000007CDEF000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012364] ACPI: APIC 0x000000007CDEE000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012379] ACPI: MCFG 0x000000007CDED000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012394] ACPI: SLIC 0x000000007CDEC000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012409] ACPI: SSDT 0x000000007CDDC000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.012423] ACPI: SSDT 0x000000007CDD9000 00249C (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.012438] ACPI: SSDT 0x000000007CDD8000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.012453] ACPI: SSDT 0x000000007CDD7000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.012468] ACPI: SSDT 0x000000007CDD6000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.012483] ACPI: SSDT 0x000000007CDD5000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.012498] ACPI: SSDT 0x000000007CDD4000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.012512] ACPI: SSDT 0x000000007CDD3000 000E87 (v01 INSYDE Q2SWmiTb 00001000 ACPI 00040000)
[    0.012527] ACPI: FPDT 0x000000007CDD2000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.012542] ACPI: CSRT 0x000000007CDD1000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.012557] ACPI: BGRT 0x000000007CDCF000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012570] ACPI: Reserving FACP table memory at [mem 0x7cdf1000-0x7cdf110b]
[    0.012576] ACPI: Reserving DSDT table memory at [mem 0x7cddd000-0x7cdebe1d]
[    0.012581] ACPI: Reserving UEFI table memory at [mem 0x7cdf6000-0x7cdf6235]
[    0.012585] ACPI: Reserving MSDM table memory at [mem 0x7cdf5000-0x7cdf5054]
[    0.012590] ACPI: Reserving UEFI table memory at [mem 0x7cdf4000-0x7cdf4041]
[    0.012594] ACPI: Reserving OEM0 table memory at [mem 0x7cdf3000-0x7cdf3083]
[    0.012598] ACPI: Reserving DBG2 table memory at [mem 0x7cdf2000-0x7cdf2071]
[    0.012603] ACPI: Reserving HPET table memory at [mem 0x7cdf0000-0x7cdf0037]
[    0.012607] ACPI: Reserving LPIT table memory at [mem 0x7cdef000-0x7cdef103]
[    0.012611] ACPI: Reserving APIC table memory at [mem 0x7cdee000-0x7cdee06b]
[    0.012616] ACPI: Reserving MCFG table memory at [mem 0x7cded000-0x7cded03b]
[    0.012620] ACPI: Reserving SLIC table memory at [mem 0x7cdec000-0x7cdec175]
[    0.012625] ACPI: Reserving SSDT table memory at [mem 0x7cddc000-0x7cddc602]
[    0.012629] ACPI: Reserving SSDT table memory at [mem 0x7cdd9000-0x7cddb49b]
[    0.012633] ACPI: Reserving SSDT table memory at [mem 0x7cdd8000-0x7cdd8057]
[    0.012638] ACPI: Reserving SSDT table memory at [mem 0x7cdd7000-0x7cdd70fe]
[    0.012642] ACPI: Reserving SSDT table memory at [mem 0x7cdd6000-0x7cdd6762]
[    0.012647] ACPI: Reserving SSDT table memory at [mem 0x7cdd5000-0x7cdd528f]
[    0.012651] ACPI: Reserving SSDT table memory at [mem 0x7cdd4000-0x7cdd4179]
[    0.012655] ACPI: Reserving SSDT table memory at [mem 0x7cdd3000-0x7cdd3e86]
[    0.012660] ACPI: Reserving FPDT table memory at [mem 0x7cdd2000-0x7cdd2043]
[    0.012664] ACPI: Reserving CSRT table memory at [mem 0x7cdd1000-0x7cdd114b]
[    0.012669] ACPI: Reserving BGRT table memory at [mem 0x7cdcf000-0x7cdcf037]
[    0.012775] No NUMA configuration found
[    0.012779] Faking a node at [mem 0x0000000000000000-0x000000007cdfffff]
[    0.012793] NODE_DATA(0) allocated [mem 0x7ccbc000-0x7ccc0fff]
[    0.012858] Zone ranges:
[    0.012862]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012870]   DMA32    [mem 0x0000000001000000-0x000000007cdfffff]
[    0.012877]   Normal   empty
[    0.012882]   Device   empty
[    0.012886] Movable zone start for each node
[    0.012889] Early memory node ranges
[    0.012891]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.012896]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.012901]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.012906]   node   0: [mem 0x0000000020200000-0x0000000077a2dfff]
[    0.012911]   node   0: [mem 0x0000000077b00000-0x000000007bb9bfff]
[    0.012915]   node   0: [mem 0x000000007bdbc000-0x000000007bdbcfff]
[    0.012920]   node   0: [mem 0x000000007bdbe000-0x000000007bdbffff]
[    0.012925]   node   0: [mem 0x000000007bdc1000-0x000000007c7fffff]
[    0.012929]   node   0: [mem 0x000000007cc00000-0x000000007ccc0fff]
[    0.012934]   node   0: [mem 0x000000007cdf8000-0x000000007cdfffff]
[    0.012940] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cdfffff]
[    0.012953] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012959] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013036] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.023153] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.023511] On node 0, zone DMA32: 210 pages in unavailable ranges
[    0.023534] On node 0, zone DMA32: 544 pages in unavailable ranges
[    0.023540] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.023601] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.023644] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.023660] On node 0, zone DMA32: 311 pages in unavailable ranges
[    0.024103] On node 0, zone DMA32: 12800 pages in unavailable ranges
[    0.024113] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.024122] Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
[    0.024233] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.024248] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.024256] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.024267] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.024272] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.024299] e820: update [mem 0x79353000-0x793aafff] usable ==> reserved
[    0.024344] TSC deadline timer available
[    0.024347] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.024439] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.024449] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.024457] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.024462] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.024469] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.024478] PM: hibernation: Registered nosave memory: [mem 0x77a2e000-0x77a33fff]
[    0.024482] PM: hibernation: Registered nosave memory: [mem 0x77a34000-0x77a3cfff]
[    0.024486] PM: hibernation: Registered nosave memory: [mem 0x77a3d000-0x77afffff]
[    0.024494] PM: hibernation: Registered nosave memory: [mem 0x79353000-0x793aafff]
[    0.024502] PM: hibernation: Registered nosave memory: [mem 0x7bb9c000-0x7bdbbfff]
[    0.024510] PM: hibernation: Registered nosave memory: [mem 0x7bdbd000-0x7bdbdfff]
[    0.024519] PM: hibernation: Registered nosave memory: [mem 0x7bdc0000-0x7bdc0fff]
[    0.024527] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0x7cbfffff]
[    0.024536] PM: hibernation: Registered nosave memory: [mem 0x7ccc1000-0x7cd1ffff]
[    0.024540] PM: hibernation: Registered nosave memory: [mem 0x7cd20000-0x7cd47fff]
[    0.024544] PM: hibernation: Registered nosave memory: [mem 0x7cd48000-0x7cdb7fff]
[    0.024548] PM: hibernation: Registered nosave memory: [mem 0x7cdb8000-0x7cdf7fff]
[    0.024554] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.024559] Booting paravirtualized kernel on bare hardware
[    0.024566] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.039907] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.040933] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
[    0.040965] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
[    0.040976] pcpu-alloc: [0] 0 1 2 3 
[    0.041063] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=PARTUUID=671d634f-f4cb-47e7-831d-78e4331ce909 rw loglevel=3 quiet fbcon=rotate:1 acpi_osi=Linux
[    0.041337] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[    0.041405] random: crng init done
[    0.042045] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.042401] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.042577] Fallback order for Node 0: 0 
[    0.042593] Built 1 zonelists, mobility grouping on.  Total pages: 500637
[    0.042600] Policy zone: DMA32
[    0.043396] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.060992] Memory: 1904788K/2035140K available (16384K kernel code, 2116K rwdata, 12868K rodata, 3404K init, 3888K bss, 130092K reserved, 0K cma-reserved)
[    0.062064] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.062115] Kernel/User page tables isolation: enabled
[    0.062226] ftrace: allocating 48545 entries in 190 pages
[    0.078998] ftrace: allocated 190 pages with 6 groups
[    0.079267] Dynamic Preempt: full
[    0.079422] rcu: Preemptible hierarchical RCU implementation.
[    0.079427] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.079431] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.079435] 	Trampoline variant of Tasks RCU enabled.
[    0.079437] 	Rude variant of Tasks RCU enabled.
[    0.079439] 	Tracing variant of Tasks RCU enabled.
[    0.079441] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.079444] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.090477] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 0
[    0.090597] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.090811] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.090930] Console: colour dummy device 80x25
[    0.090939] printk: legacy console [tty0] enabled
[    0.091119] ACPI: Core revision 20230628
[    0.091532] APIC: Switch to symmetric I/O mode setup
[    0.091611] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
[    0.091631] Calibrating delay loop (skipped), value calculated using timer frequency.. 2667.77 BogoMIPS (lpj=4444443)
[    0.091670] CPU0: Thermal monitoring enabled (TM1)
[    0.091705] process: using mwait in idle threads
[    0.091717] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.091723] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.091735] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.091743] Spectre V2 : Mitigation: Retpolines
[    0.091747] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.091750] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.091753] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.091759] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.091768] MDS: Mitigation: Clear CPU buffers
[    0.091772] MMIO Stale Data: Unknown: No mitigations
[    0.091779] x86/fpu: x87 FPU will use FXSAVE
[    0.094957] Freeing SMP alternatives memory: 40K
[    0.094957] pid_max: default: 32768 minimum: 301
[    0.094957] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.094957] landlock: Up and running.
[    0.094957] Yama: becoming mindful.
[    0.094957] LSM support for eBPF active
[    0.094957] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.094957] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.094957] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.094957] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.094957] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.094957] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.094957] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.094957] ... version:                3
[    0.094957] ... bit width:              40
[    0.094957] ... generic registers:      2
[    0.094957] ... value mask:             000000ffffffffff
[    0.094957] ... max period:             0000007fffffffff
[    0.094957] ... fixed-purpose events:   3
[    0.094957] ... event mask:             0000000700000003
[    0.094957] signal: max sigframe size: 1440
[    0.094957] Estimated ratio of average max frequency by base frequency (times 1024): 1408
[    0.098416] rcu: Hierarchical SRCU implementation.
[    0.098425] rcu: 	Max phase no-delay instances is 1000.
[    0.099944] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.100211] smp: Bringing up secondary CPUs ...
[    0.100805] smpboot: x86: Booting SMP configuration:
[    0.100812] .... node  #0, CPUs:      #1 #2 #3
[    0.102196] smp: Brought up 1 node, 4 CPUs
[    0.102196] smpboot: Max logical packages: 1
[    0.102196] smpboot: Total of 4 processors activated (10670.10 BogoMIPS)
[    0.102804] devtmpfs: initialized
[    0.102804] x86/mm: Memory block size: 128MB
[    0.105614] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.105614] ACPI: PM: Registering ACPI NVS region [mem 0x7cd48000-0x7cdb7fff] (458752 bytes)
[    0.105614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.105614] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.105614] pinctrl core: initialized pinctrl subsystem
[    0.105733] PM: RTC time: 11:21:03, date: 2024-04-12
[    0.108712] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.109141] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.109239] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.109329] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.109412] audit: initializing netlink subsys (disabled)
[    0.109466] audit: type=2000 audit(1712920863.016:1): state=initialized audit_enabled=0 res=1
[    0.109466] thermal_sys: Registered thermal governor 'fair_share'
[    0.109466] thermal_sys: Registered thermal governor 'bang_bang'
[    0.109466] thermal_sys: Registered thermal governor 'step_wise'
[    0.109466] thermal_sys: Registered thermal governor 'user_space'
[    0.109466] thermal_sys: Registered thermal governor 'power_allocator'
[    0.109466] cpuidle: using governor ladder
[    0.109466] cpuidle: using governor menu
[    0.109466] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.109466] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.109466] PCI: not using MMCONFIG
[    0.109466] PCI: Using configuration type 1 for base access
[    0.109938] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.111638] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.115135] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.115135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.115955] ACPI: Added _OSI(Module Device)
[    0.115955] ACPI: Added _OSI(Processor Device)
[    0.115955] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.115955] ACPI: Added _OSI(Processor Aggregator Device)
[    0.115955] ACPI: Added _OSI(Linux)
[    0.164999] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.173614] ACPI: Dynamic OEM Table Load:
[    0.173614] ACPI: SSDT 0xFFFF99D401E49000 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.177790] ACPI: Dynamic OEM Table Load:
[    0.177814] ACPI: SSDT 0xFFFF99D401E4D800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.181465] ACPI: Dynamic OEM Table Load:
[    0.181489] ACPI: SSDT 0xFFFF99D401CD4A00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.184018] ACPI: Dynamic OEM Table Load:
[    0.184041] ACPI: SSDT 0xFFFF99D401EC5F00 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.189606] ACPI: _OSC evaluated successfully for all CPUs
[    0.191082] ACPI: Interpreter enabled
[    0.191139] ACPI: PM: (supports S0 S5)
[    0.191145] ACPI: Using IOAPIC for interrupt routing
[    0.194374] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.203334] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.203347] PCI: not using MMCONFIG
[    0.203371] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.203377] PCI: Using E820 reservations for host bridge windows
[    0.209632] ACPI: \_SB_.USBC: New power resource
[    0.210857] ACPI: \_SB_.PCI0.XHC1.RHUB.HS03.WWPR: New power resource
[    0.229915] ACPI: \_SB_.I2C1.CLK0: New power resource
[    0.232951] ACPI: \_SB_.I2C2.CLK0: New power resource
[    0.233109] ACPI: \_SB_.I2C2.CLK1: New power resource
[    0.237023] ACPI: \_SB_.P28X: New power resource
[    0.237191] ACPI: \_SB_.P18X: New power resource
[    0.237363] ACPI: \_SB_.P28P: New power resource
[    0.237528] ACPI: \_SB_.P18P: New power resource
[    0.237700] ACPI: \_SB_.P28T: New power resource
[    0.237869] ACPI: \_SB_.P18T: New power resource
[    0.238045] ACPI: \_SB_.P1XT: New power resource
[    0.244113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.244139] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.244148] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.244372] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.244411] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.245704] PCI host bridge to bus 0000:00
[    0.245714] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.245723] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.245730] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.245737] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.245744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.245752] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.245759] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
[    0.245765] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90affffe window]
[    0.245772] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.245779] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.245820] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.246114] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.246134] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.246152] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.246168] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.246201] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.246213] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.246514] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.246540] pci 0000:00:14.0: reg 0x10: [mem 0x90a00000-0x90a0ffff 64bit]
[    0.246621] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.246879] pci 0000:00:16.0: [8086:0f37] type 00 class 0x0c0380
[    0.246902] pci 0000:00:16.0: reg 0x10: [mem 0x90400000-0x905fffff]
[    0.246917] pci 0000:00:16.0: reg 0x14: [mem 0x90a2c000-0x90a2cfff]
[    0.246991] pci 0000:00:16.0: PME# supported from D0 D3hot
[    0.247233] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.247261] pci 0000:00:1a.0: reg 0x10: [mem 0x90900000-0x909fffff]
[    0.247278] pci 0000:00:1a.0: reg 0x14: [mem 0x90800000-0x908fffff]
[    0.247379] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.247626] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.249786] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.249795] ACPI: PCI: Interrupt link LNKA disabled
[    0.250124] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.250132] ACPI: PCI: Interrupt link LNKB disabled
[    0.250460] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.250468] ACPI: PCI: Interrupt link LNKC disabled
[    0.250806] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.250814] ACPI: PCI: Interrupt link LNKD disabled
[    0.251145] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.251153] ACPI: PCI: Interrupt link LNKE disabled
[    0.251480] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.251488] ACPI: PCI: Interrupt link LNKF disabled
[    0.251824] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.251832] ACPI: PCI: Interrupt link LNKG disabled
[    0.252160] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.252168] ACPI: PCI: Interrupt link LNKH disabled
[    0.255873] Low-power S0 idle used by default for system suspend
[    0.269222] ACPI: \_SB_.LPEA.PLPE: New power resource
[    0.291728] iommu: Default domain type: Translated
[    0.291728] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.292129] SCSI subsystem initialized
[    0.292157] libata version 3.00 loaded.
[    0.292157] ACPI: bus type USB registered
[    0.292157] usbcore: registered new interface driver usbfs
[    0.292157] usbcore: registered new interface driver hub
[    0.292157] usbcore: registered new device driver usb
[    0.462878] EDAC MC: Ver: 3.0.0
[    0.463024] efivars: Registered efivars operations
[    0.465771] NetLabel: Initializing
[    0.465776] NetLabel:  domain hash size = 128
[    0.465782] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.465847] NetLabel:  unlabeled traffic allowed by default
[    0.465868] mctp: management component transport protocol core
[    0.465872] NET: Registered PF_MCTP protocol family
[    0.465885] PCI: Using ACPI for IRQ routing
[    0.465891] PCI: pci_cache_line_size set to 64 bytes
[    0.465921] resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.465929] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.465936] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.465941] e820: reserve RAM buffer [mem 0x77a2e000-0x77ffffff]
[    0.465947] e820: reserve RAM buffer [mem 0x79353000-0x7bffffff]
[    0.465952] e820: reserve RAM buffer [mem 0x7bb9c000-0x7bffffff]
[    0.465957] e820: reserve RAM buffer [mem 0x7bdbd000-0x7bffffff]
[    0.465962] e820: reserve RAM buffer [mem 0x7bdc0000-0x7bffffff]
[    0.465967] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[    0.465974] e820: reserve RAM buffer [mem 0x7ccc1000-0x7fffffff]
[    0.465980] e820: reserve RAM buffer [mem 0x7ce00000-0x7fffffff]
[    0.466265] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.466265] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.466265] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.466265] vgaarb: loaded
[    0.466265] clocksource: Switched to clocksource tsc-early
[    0.467295] VFS: Disk quotas dquot_6.6.0
[    0.467344] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.467674] pnp: PnP ACPI init
[    0.468055] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.468068] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.468077] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.468077] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.468077] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.475332] pnp: PnP ACPI: found 3 devices
[    0.482010] NET: Registered PF_INET protocol family
[    0.482170] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.484098] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.484247] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.484301] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.484539] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.484766] TCP: Hash tables configured (established 16384 bind 16384)
[    0.484995] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.485062] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.485110] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.485253] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.485281] NET: Registered PF_XDP protocol family
[    0.485307] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.485318] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.485326] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.485333] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.485339] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
[    0.485346] pci_bus 0000:00: resource 9 [mem 0x90c00000-0x90ffffff window]
[    0.485353] pci_bus 0000:00: resource 10 [mem 0x7d000001-0x7f000000 window]
[    0.485360] pci_bus 0000:00: resource 11 [mem 0x80000000-0x90affffe window]
[    0.485367] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed40fff window]
[    0.486024] PCI: CLS 64 bytes, default 64
[    0.486195] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
[    0.486246] clocksource: Switched to clocksource tsc
[    0.486266] Trying to unpack rootfs image as initramfs...
[    0.496381] Initialise system trusted keyrings
[    0.496419] Key type blacklist registered
[    0.496645] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[    0.496689] zbud: loaded
[    0.497379] integrity: Platform Keyring initialized
[    0.497394] integrity: Machine keyring initialized
[    0.553029] Key type asymmetric registered
[    0.553042] Asymmetric key parser 'x509' registered
[    0.553111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.553339] io scheduler mq-deadline registered
[    0.553347] io scheduler kyber registered
[    0.553390] io scheduler bfq registered
[    0.553893] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.555722] ACPI: found native INT33F4 PMIC, skipping ACPI AC and battery devices
[    0.563646] ACPI: thermal: [Firmware Bug]: No valid trip points!
[    0.564936] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.565303] 00:02: ttyS0 at I/O 0x3f8 (irq = 113, base_baud = 115200) is a 16550A
[    0.592986] hpet: number irqs doesn't agree with number of timers
[    0.593736] Non-volatile memory driver v1.3
[    0.593744] Linux agpgart interface v0.103
[    0.594385] ACPI: bus type drm_connector registered
[    0.599826] usbcore: registered new interface driver usbserial_generic
[    0.599853] usbserial: USB Serial support registered for generic
[    0.600293] rtc_cmos 00:00: registered as rtc0
[    0.600340] rtc_cmos 00:00: setting system clock to 2024-04-12T11:21:04 UTC (1712920864)
[    0.600413] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    0.601519] intel_pstate: Intel P-state driver initializing
[    0.603802] ledtrig-cpu: registered to indicate activity on CPUs
[    0.605944] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.608202] fbcon: Deferring console take-over
[    0.608213] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.608370] hid: raw HID events driver (C) Jiri Kosina
[    0.608757] drop_monitor: Initializing network drop monitor service
[    0.640608] NET: Registered PF_INET6 protocol family
[    0.770111] Freeing initrd memory: 18720K
[    0.815985] Segment Routing with IPv6
[    0.816004] RPL Segment Routing with IPv6
[    0.816088] In-situ OAM (IOAM) with IPv6
[    0.816272] NET: Registered PF_PACKET protocol family
[    0.822022] microcode: Current revision: 0x00000838
[    0.822045] microcode: Updated early from: 0x0000082b
[    0.823868] IPI shorthand broadcast: enabled
[    0.834686] sched_clock: Marking stable (833338922, 995209)->(895125631, -60791500)
[    0.837063] registered taskstats version 1
[    0.842957] Loading compiled-in X.509 certificates
[    0.867858] Loaded X.509 cert 'Build time autogenerated kernel key: 8ce7c76ad10401d71312ab823fd2fc1035477ee3'
[    0.876092] zswap: loaded using pool zstd/zsmalloc
[    0.891159] Key type .fscrypt registered
[    0.891181] Key type fscrypt-provisioning registered
[    0.949915] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    0.977114] PM:   Magic number: 4:876:377
[    0.986734] RAS: Correctable Errors collector initialized.
[    1.021850] clk: Disabling unused clocks
[    1.059218] Freeing unused decrypted memory: 2028K
[    1.061951] Freeing unused kernel image (initmem) memory: 3404K
[    1.062509] Write protecting the kernel read-only data: 30720k
[    1.065765] Freeing unused kernel image (rodata/data gap) memory: 1468K
[    1.165366] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.165378] rodata_test: all tests were successful
[    1.165393] x86/mm: Checking user space page tables
[    1.246174] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.246212] Run /init as init process
[    1.246216]   with arguments:
[    1.246220]     /init
[    1.246223]   with environment:
[    1.246225]     HOME=/
[    1.246227]     TERM=linux
[    1.246229]     BOOT_IMAGE=/vmlinuz-linux
[    1.308606] systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    1.308628] systemd[1]: Detected architecture x86-64.
[    1.308640] systemd[1]: Running in initrd.
[    1.309373] systemd[1]: Initializing machine ID from random generator.
[    1.442991] systemd[1]: Queued start job for default target Initrd Default Target.
[    1.482920] systemd[1]: Expecting device /dev/disk/by-partuuid/671d634f-f4cb-47e7-831d-78e4331ce909...
[    1.483339] systemd[1]: Reached target Path Units.
[    1.483421] systemd[1]: Reached target Slice Units.
[    1.483515] systemd[1]: Reached target Swaps.
[    1.483587] systemd[1]: Reached target Timer Units.
[    1.484205] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.484713] systemd[1]: Listening on Journal Socket.
[    1.485247] systemd[1]: Listening on udev Control Socket.
[    1.485614] systemd[1]: Listening on udev Kernel Socket.
[    1.485669] systemd[1]: Reached target Socket Units.
[    1.485766] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.7.6-arch1-2/modules.devname).
[    1.485931] systemd[1]: Check battery level during early boot was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/class/power_supply).
[    1.491625] systemd[1]: Started Displays emergency message in full screen..
[    1.499350] systemd[1]: Starting Journal Service...
[    1.503311] systemd[1]: Starting Load Kernel Modules...
[    1.503423] systemd[1]: TPM2 PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.511637] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.518213] systemd[1]: Starting Coldplug All udev Devices...
[    1.540419] systemd[1]: Finished Load Kernel Modules.
[    1.561794] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.562162] systemd[1]: Reached target Preparation for Local File Systems.
[    1.562225] systemd[1]: Reached target Local File Systems.
[    1.565901] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    1.567610] systemd-journald[96]: Collecting audit messages is disabled.
[    1.644385] systemd[1]: Started Journal Service.
[    2.174568] sdhci: Secure Digital Host Controller Interface driver
[    2.174578] sdhci: Copyright(c) Pierre Ossman
[    2.186421] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.186444] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.187545] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    2.188005] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.188018] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.188043] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.188202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[    2.188212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.188218] usb usb1: Product: xHCI Host Controller
[    2.188222] usb usb1: Manufacturer: Linux 6.7.6-arch1-2 xhci-hcd
[    2.188226] usb usb1: SerialNumber: 0000:00:14.0
[    2.195510] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    2.197512] hub 1-0:1.0: USB hub found
[    2.197562] hub 1-0:1.0: 6 ports detected
[    2.210770] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.217856] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    2.280319] mmc0: new high speed SDIO card at address 0001
[    2.736229] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[    2.736245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.736253] usb usb2: Product: xHCI Host Controller
[    2.736258] usb usb2: Manufacturer: Linux 6.7.6-arch1-2 xhci-hcd
[    2.736264] usb usb2: SerialNumber: 0000:00:14.0
[    2.737792] hub 2-0:1.0: USB hub found
[    2.737886] hub 2-0:1.0: 1 port detected
[    2.829116] mmc1: new HS200 MMC card at address 0001
[    2.893386] mmcblk1: mmc1:0001 NCard  28.9 GiB
[    2.929034]  mmcblk1: p1 p2
[    2.930492] mmcblk1boot0: mmc1:0001 NCard  4.00 MiB
[    2.931885] mmcblk1boot1: mmc1:0001 NCard  4.00 MiB
[    2.935060] mmcblk1rpmb: mmc1:0001 NCard  4.00 MiB, chardev (244:0)
[    2.987695] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    3.132996] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
[    3.133033] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.133053] usb 1-1: Product: USB Hub 2.0
[    3.133072] usb 1-1: Manufacturer: ALCOR
[    3.133932] hub 1-1:1.0: USB hub found
[    3.134038] hub 1-1:1.0: 4 ports detected
[    3.417817] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[    3.509871] usb 1-1.2: New USB device found, idVendor=3938, idProduct=1031, bcdDevice= 1.08
[    3.509884] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.509889] usb 1-1.2: Product: 2.4G Wireless Mouse
[    3.509893] usb 1-1.2: Manufacturer: MOSART Semi.
[    3.588329] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[    3.686008] usb 1-1.3: New USB device found, idVendor=145f, idProduct=02c9, bcdDevice= 1.01
[    3.686046] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.686065] usb 1-1.3: Product: Trust Keyboard
[    3.686080] usb 1-1.3: Manufacturer: SIGMACHIP
[    3.720589] EXT4-fs (mmcblk1p2): mounted filesystem b6b596bf-9656-43fd-bd96-917fee90427a r/w with ordered data mode. Quota mode: none.
[    4.240837] systemd-journald[96]: Received SIGTERM from PID 1 (systemd).
[    4.700883] systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.700911] systemd[1]: Detected architecture x86-64.
[    4.705198] systemd[1]: Hostname set to <onda>.
[    5.351670] systemd[1]: bpf-lsm: LSM BPF program attached
[    6.384751] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[    6.422587] systemd[1]: Stopped Switch Root.
[    6.426049] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    6.427772] systemd[1]: Created slice Slice /system/dirmngr.
[    6.429146] systemd[1]: Created slice Slice /system/getty.
[    6.430390] systemd[1]: Created slice Slice /system/gpg-agent.
[    6.431765] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    6.433218] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    6.434676] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    6.436091] systemd[1]: Created slice Slice /system/keyboxd.
[    6.437562] systemd[1]: Created slice Slice /system/modprobe.
[    6.438867] systemd[1]: Created slice User and Session Slice.
[    6.439188] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.439453] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.440187] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.440265] systemd[1]: Expecting device /dev/disk/by-uuid/9B6B-90FA...
[    6.440334] systemd[1]: Reached target Local Encrypted Volumes.
[    6.440402] systemd[1]: Reached target Login Prompts.
[    6.440479] systemd[1]: Stopped target Switch Root.
[    6.440544] systemd[1]: Stopped target Initrd File Systems.
[    6.440591] systemd[1]: Stopped target Initrd Root File System.
[    6.440661] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.440767] systemd[1]: Reached target Path Units.
[    6.440839] systemd[1]: Reached target Remote File Systems.
[    6.440907] systemd[1]: Reached target Slice Units.
[    6.441345] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.441744] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.462132] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.468200] systemd[1]: Listening on Process Core Dump Socket.
[    6.468321] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.468984] systemd[1]: Listening on udev Control Socket.
[    6.469459] systemd[1]: Listening on udev Kernel Socket.
[    6.509492] systemd[1]: Mounting Huge Pages File System...
[    6.514004] systemd[1]: Mounting POSIX Message Queue File System...
[    6.517368] systemd[1]: Mounting Kernel Debug File System...
[    6.520908] systemd[1]: Mounting Kernel Trace File System...
[    6.528296] systemd[1]: Starting Create List of Static Device Nodes...
[    6.531691] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.543845] systemd[1]: Starting Load Kernel Module configfs...
[    6.548454] systemd[1]: Starting Load Kernel Module dm_mod...
[    6.555729] systemd[1]: Starting Load Kernel Module drm...
[    6.563623] systemd[1]: Starting Load Kernel Module fuse...
[    6.569119] systemd[1]: Starting Load Kernel Module loop...
[    6.591746] systemd[1]: Starting Journal Service...
[    6.604970] systemd[1]: Starting Load Kernel Modules...
[    6.605053] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.612409] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.612585] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.644865] systemd[1]: Starting Coldplug All udev Devices...
[    6.652612] fuse: init (API version 7.39)
[    6.658427] systemd[1]: Mounted Huge Pages File System.
[    6.658973] systemd[1]: Mounted POSIX Message Queue File System.
[    6.659514] systemd[1]: Mounted Kernel Debug File System.
[    6.660025] systemd[1]: Mounted Kernel Trace File System.
[    6.665466] device-mapper: uevent: version 1.0.3
[    6.665971] loop: module loaded
[    6.670195] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    6.681740] systemd[1]: Finished Create List of Static Device Nodes.
[    6.683701] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.693497] systemd[1]: Finished Load Kernel Module configfs.
[    6.694926] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    6.712622] systemd-journald[188]: Collecting audit messages is disabled.
[    6.719502] systemd[1]: Finished Load Kernel Module dm_mod.
[    6.721080] EXT4-fs (mmcblk1p2): re-mounted b6b596bf-9656-43fd-bd96-917fee90427a r/w. Quota mode: none.
[    6.721895] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.733441] Asymmetric key parser 'pkcs8' registered
[    6.745997] systemd[1]: Finished Load Kernel Module drm.
[    6.748765] systemd[1]: Started Journal Service.
[    7.009037] Adding 2097148k swap on /swapfile.  Priority:-2 extents:38 across:16089088k SS
[    7.042895] systemd-journald[188]: Received client request to flush runtime journal.
[    7.080136] systemd-journald[188]: /var/log/journal/43603586618c412c8cc4211752718790/system.journal: Journal file uses a different sequence number ID, rotating.
[    7.080160] systemd-journald[188]: Rotating system journal.
[    8.408972] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.408987] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.408995] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.409003] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.409010] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.409018] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.409025] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.418552] 80860F0A:00: ttyS4 at MMIO 0x90b19000 (irq = 97, base_baud = 2764800) is a 16550A
[    8.431819] serial serial0: tty port ttyS4 registered
[    8.448968] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.455038] 80860F0A:01: ttyS5 at MMIO 0x90b1b000 (irq = 98, base_baud = 2764800) is a 16550A
[    8.588656] mc: Linux media interface: v0.10
[    8.632160] silead_ts i2c-MSSL1680:00: supply vddio not found, using dummy regulator
[    8.632271] silead_ts i2c-MSSL1680:00: supply avdd not found, using dummy regulator
[    8.639899] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000
[    8.660150] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    8.660738] gpio gpiochip3: (INT0002 Virtual GPIO): not an immutable chip, please consider fixing it!
[    8.711120] byt_gpio INT33FC:02: [Firmware Bug]: Pin 21: forcibly re-configured as GPIO
[    8.735562] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    8.755237] Consider using thermal netlink events interface
[    8.775027] bmc150_accel_i2c i2c-BMA250E:00: mounting matrix not found: using identity...
[    8.775043] bmc150_accel_i2c i2c-BMA250E:00: supply vdd not found, using dummy regulator
[    8.776694] bmc150_accel_i2c i2c-BMA250E:00: supply vddio not found, using dummy regulator
[    8.782386] videodev: Linux video capture interface: v2.00
[    9.020707] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    9.058888] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    9.223512] Bluetooth: Core ver 2.22
[    9.223584] NET: Registered PF_BLUETOOTH protocol family
[    9.223590] Bluetooth: HCI device and connection manager initialized
[    9.223600] Bluetooth: HCI socket layer initialized
[    9.223612] Bluetooth: L2CAP socket layer initialized
[    9.223627] Bluetooth: SCO socket layer initialized
[    9.243192] usbcore: registered new interface driver usbhid
[    9.243203] usbhid: USB HID core driver
[    9.617694] mei_txe 0000:00:1a.0: wait for readiness failed
[    9.617706] mei_txe 0000:00:1a.0: waiting for readiness failed
[    9.617717] mei_txe 0000:00:1a.0: hw_start failed ret = -62 fw status = 1F365195 15150000 
[   10.495927] input: silead_ts as /devices/platform/80860F41:03/i2c-3/i2c-MSSL1680:00/input/input0
[   10.628342] mei_txe 0000:00:1a.0: wait for readiness failed
[   10.628368] mei_txe 0000:00:1a.0: waiting for readiness failed
[   10.628394] mei_txe 0000:00:1a.0: hw_start failed ret = -62 fw status = 1F365195 15150000 
[   10.885693] input: PC Speaker as /devices/platform/pcspkr/input/input1
[   10.901156] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.904172] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.904928] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   10.907957] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   10.907976] cfg80211: failed to load regulatory.db
[   10.931101] i915 0000:00:02.0: vgaarb: deactivate vga console
[   10.944958] cryptd: max_cpu_qlen set to 1000
[   11.016287] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[   11.023188] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.023684] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[   11.031251] i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
[   11.031582] i915 display info: display version: 7
[   11.031590] i915 display info: cursor_needs_physical: no
[   11.031594] i915 display info: has_cdclk_crawl: no
[   11.031598] i915 display info: has_cdclk_squash: no
[   11.031601] i915 display info: has_ddi: no
[   11.031604] i915 display info: has_dp_mst: no
[   11.031607] i915 display info: has_dsb: no
[   11.031610] i915 display info: has_fpga_dbg: no
[   11.031613] i915 display info: has_gmch: yes
[   11.031616] i915 display info: has_hotplug: yes
[   11.031619] i915 display info: has_hti: no
[   11.031622] i915 display info: has_ipc: no
[   11.031625] i915 display info: has_overlay: no
[   11.031628] i915 display info: has_psr: no
[   11.031632] i915 display info: has_psr_hw_tracking: no
[   11.031635] i915 display info: overlay_needs_physical: no
[   11.031638] i915 display info: supports_tv: no
[   11.031641] i915 display info: has_hdcp: no
[   11.031644] i915 display info: has_dmc: no
[   11.031647] i915 display info: has_dsc: no
[   11.053753] SSE version of gcm_enc/dec engaged.
[   11.072000] Bluetooth: HCI UART driver ver 2.3
[   11.072012] Bluetooth: HCI UART protocol H4 registered
[   11.072016] Bluetooth: HCI UART protocol BCSP registered
[   11.072078] Bluetooth: HCI UART protocol LL registered
[   11.072083] Bluetooth: HCI UART protocol ATH3K registered
[   11.072138] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.072255] Bluetooth: HCI UART protocol Intel registered
[   11.072433] Bluetooth: HCI UART protocol Broadcom registered
[   11.072466] Bluetooth: HCI UART protocol QCA registered
[   11.072471] Bluetooth: HCI UART protocol AG6XX registered
[   11.072499] Bluetooth: HCI UART protocol Marvell registered
[   11.087074] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[   11.098391] fbcon: i915drmfb (fb0) is primary device
[   11.098399] fbcon: Deferring console take-over
[   11.098410] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   11.181581] iTCO_vendor_support: vendor-support=0
[   11.230514] pnetdev = 00000000f7afc5aa
[   11.641039] mei_txe 0000:00:1a.0: wait for readiness failed
[   11.641051] mei_txe 0000:00:1a.0: waiting for readiness failed
[   11.641063] mei_txe 0000:00:1a.0: hw_start failed ret = -62 fw status = 1F365195 15150000 
[   11.641083] mei_txe 0000:00:1a.0: reset: reached maximal consecutive resets: disabling the device
[   11.641090] mei_txe 0000:00:1a.0: reset failed ret = -19
[   11.641094] mei_txe 0000:00:1a.0: link layer initialization failed.
[   11.641099] mei_txe 0000:00:1a.0: init hw failure.
[   11.641604] mei_txe 0000:00:1a.0: initialization failed.
[   11.821541] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[   11.821740] intel_sst_acpi 80860F28:00: LPE base: 0x91000000 size:0x200000
[   11.821749] intel_sst_acpi 80860F28:00: IRAM base: 0x910c0000
[   11.821783] intel_sst_acpi 80860F28:00: DRAM base: 0x91100000
[   11.821799] intel_sst_acpi 80860F28:00: SHIM base: 0x91140000
[   11.821813] intel_sst_acpi 80860F28:00: Mailbox base: 0x91144000
[   11.821827] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[   11.824459] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[   11.840141] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.1.auto/input/input3
[   11.840623] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.2.auto/input/input4
[   11.840817] iTCO_wdt iTCO_wdt.0.auto: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   11.846853] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
[   11.865909] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   11.870118] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   11.870131] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin
[   11.873347] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin
[   11.897786] Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508
[   12.049879] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:3938:1031.0001/input/input6
[   12.050352] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:3938:1031.0001/input/input7
[   12.050719] hid-generic 0003:3938:1031.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-1.2/input0
[   12.051917] input: SIGMACHIP Trust Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:145F:02C9.0002/input/input8
[   12.061118] dwc3 dwc3: changing max_speed on rev 5533210a
[   12.084071] intel_rapl_common: Found RAPL domain package
[   12.084082] intel_rapl_common: Found RAPL domain core
[   12.109018] hid-generic 0003:145F:02C9.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP Trust Keyboard] on usb-0000:00:14.0-1.3/input0
[   12.111171] input: SIGMACHIP Trust Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:145F:02C9.0003/input/input9
[   12.119426] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input5
[   12.167998] input: SIGMACHIP Trust Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:145F:02C9.0003/input/input10
[   12.168929] hid-generic 0003:145F:02C9.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP Trust Keyboard] on usb-0000:00:14.0-1.3/input1
[   12.172645] mousedev: PS/2 mouse device common for all mice
[   12.239565] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input11
[   12.239738] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input12
[   12.362375] bytcr_rt5651 bytcr_rt5651: BIOS Routing: AIF1 connected
[   12.362455] bytcr_rt5651 bytcr_rt5651: quirk IN2_MAP enabled
[   12.362462] bytcr_rt5651 bytcr_rt5651: quirk realtek,jack-detect-source 1
[   12.362467] bytcr_rt5651 bytcr_rt5651: quirk realtek,over-current-threshold-microamp 2000
[   12.362472] bytcr_rt5651 bytcr_rt5651: quirk realtek,over-current-scale-factor 1
[   12.362476] bytcr_rt5651 bytcr_rt5651: quirk MCLK_EN enabled
[   12.362480] bytcr_rt5651 bytcr_rt5651: quirk SSP0_AIF1 enabled
[   12.385787] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   12.454769] input: bytcr-rt5651 Headset as /devices/platform/80860F28:00/bytcr_rt5651/sound/card1/input13
[   12.455335] Bluetooth: hci0: RTL: fw version 0x365d462e
[   12.816779] spi-nor spi0.0: gd25lq64c (8192 Kbytes)
[   12.817303] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.817311] Bluetooth: BNEP filters: protocol multicast
[   12.817321] Bluetooth: BNEP socket layer initialized
[   12.825826] Bluetooth: MGMT ver 1.22
[   12.837308] Creating 1 MTD partitions on "intel-spi":
[   12.837325] 0x000000000000-0x000000800000 : "BIOS"
[   12.890181] NET: Registered PF_ALG protocol family
[   17.695326] systemd-journald[188]: /var/log/journal/43603586618c412c8cc4211752718790/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   23.191728] i2c i2c-OVTI2680:00: deferred probe pending
[   23.635765] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[   24.158137] Bluetooth: RFCOMM TTY layer initialized
[   24.158155] Bluetooth: RFCOMM socket layer initialized
[   24.158173] Bluetooth: RFCOMM ver 1.11
[   65.996804] input: Bluetooth Keyboard as /devices/virtual/misc/uhid/0005:04E8:7021.0004/input/input14
[   65.998990] input: Bluetooth Keyboard Mouse as /devices/virtual/misc/uhid/0005:04E8:7021.0004/input/input15
[   65.999896] hid-generic 0005:04E8:7021.0004: input,hidraw3: BLUETOOTH HID v0.01 Keyboard [Bluetooth Keyboard] on 00:aa:bb:b1:31:d8

And here is the last (6.8.5-arch1-1) faulting one.

[    0.000000] Linux version 6.8.5-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Thu, 11 Apr 2024 01:47:33 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=PARTUUID=671d634f-f4cb-47e7-831d-78e4331ce909 rw loglevel=3 quiet fbcon=rotate:1 acpi_osi=Linux
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000077a2dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077a2e000-0x0000000077a33fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077a34000-0x0000000077a3cfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000077a3d000-0x0000000077afffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077b00000-0x000000007bb9bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bb9c000-0x000000007bdbbfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdbc000-0x000000007bdbcfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bdbd000-0x000000007bdbdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdbe000-0x000000007bdbffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bdc0000-0x000000007bdc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdc1000-0x000000007c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007ccc0fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ccc1000-0x000000007cd1ffff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007cd20000-0x000000007cd47fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cd48000-0x000000007cdb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007cdb8000-0x000000007cdf7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007cdf8000-0x000000007cdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.4 by INSYDE Corp.
[    0.000000] efi: ACPI 2.0=0x7cdf7014 ESRT=0x77abef10 SMBIOS=0x7bd72000 
[    0.000000] efi: Not removing mem41: MMIO range=[0xe00f8000-0xe00f8fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem42: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
[    0.000000] efi: Remove mem43: MMIO range=[0xffd00000-0xffffffff] (3MB) from e820 map
[    0.000000] e820: remove [mem 0xffd00000-0xffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ONDA ONDA Tablet/ONDA Tablet, BIOS ONDA.B.D86CJUBNRBA02 08/26/2015
[    0.000000] tsc: Detected 1333.333 MHz processor
[    0.000026] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000041] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000074] last_pfn = 0x7ce00 max_arch_pfn = 0x400000000
[    0.000091] MTRR map: 7 entries (2 fixed + 5 variable; max 18), built from 8 variable MTRRs
[    0.000099] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.010291] esrt: Reserving ESRT space from 0x0000000077abef10 to 0x0000000077abef48.
[    0.012582] Secure boot disabled
[    0.012587] RAMDISK: [mem 0x35b5d000-0x36da5fff]
[    0.012603] ACPI: Early table checksum verification disabled
[    0.012612] ACPI: RSDP 0x000000007CDF7014 000024 (v02 INSYDE)
[    0.012628] ACPI: XSDT 0x000000007CDD0188 0000D4 (v01 INSYDE INSYDE   00000003      01000013)
[    0.012650] ACPI: FACP 0x000000007CDF1000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012671] ACPI: DSDT 0x000000007CDDD000 00EE1E (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012689] ACPI: UEFI 0x000000007CDF6000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012705] ACPI: MSDM 0x000000007CDF5000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012721] ACPI: UEFI 0x000000007CDF4000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.012736] ACPI: OEM0 0x000000007CDF3000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012752] ACPI: DBG2 0x000000007CDF2000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012768] ACPI: HPET 0x000000007CDF0000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012783] ACPI: LPIT 0x000000007CDEF000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012799] ACPI: APIC 0x000000007CDEE000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012814] ACPI: MCFG 0x000000007CDED000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012829] ACPI: SLIC 0x000000007CDEC000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012845] ACPI: SSDT 0x000000007CDDC000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.012860] ACPI: SSDT 0x000000007CDD9000 00249C (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.012875] ACPI: SSDT 0x000000007CDD8000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.012891] ACPI: SSDT 0x000000007CDD7000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.012906] ACPI: SSDT 0x000000007CDD6000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.012921] ACPI: SSDT 0x000000007CDD5000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.012937] ACPI: SSDT 0x000000007CDD4000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.012952] ACPI: SSDT 0x000000007CDD3000 000E87 (v01 INSYDE Q2SWmiTb 00001000 ACPI 00040000)
[    0.012967] ACPI: FPDT 0x000000007CDD2000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.012982] ACPI: CSRT 0x000000007CDD1000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.012998] ACPI: BGRT 0x000000007CDCF000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.013011] ACPI: Reserving FACP table memory at [mem 0x7cdf1000-0x7cdf110b]
[    0.013017] ACPI: Reserving DSDT table memory at [mem 0x7cddd000-0x7cdebe1d]
[    0.013022] ACPI: Reserving UEFI table memory at [mem 0x7cdf6000-0x7cdf6235]
[    0.013027] ACPI: Reserving MSDM table memory at [mem 0x7cdf5000-0x7cdf5054]
[    0.013032] ACPI: Reserving UEFI table memory at [mem 0x7cdf4000-0x7cdf4041]
[    0.013037] ACPI: Reserving OEM0 table memory at [mem 0x7cdf3000-0x7cdf3083]
[    0.013041] ACPI: Reserving DBG2 table memory at [mem 0x7cdf2000-0x7cdf2071]
[    0.013046] ACPI: Reserving HPET table memory at [mem 0x7cdf0000-0x7cdf0037]
[    0.013051] ACPI: Reserving LPIT table memory at [mem 0x7cdef000-0x7cdef103]
[    0.013056] ACPI: Reserving APIC table memory at [mem 0x7cdee000-0x7cdee06b]
[    0.013061] ACPI: Reserving MCFG table memory at [mem 0x7cded000-0x7cded03b]
[    0.013066] ACPI: Reserving SLIC table memory at [mem 0x7cdec000-0x7cdec175]
[    0.013070] ACPI: Reserving SSDT table memory at [mem 0x7cddc000-0x7cddc602]
[    0.013075] ACPI: Reserving SSDT table memory at [mem 0x7cdd9000-0x7cddb49b]
[    0.013080] ACPI: Reserving SSDT table memory at [mem 0x7cdd8000-0x7cdd8057]
[    0.013085] ACPI: Reserving SSDT table memory at [mem 0x7cdd7000-0x7cdd70fe]
[    0.013089] ACPI: Reserving SSDT table memory at [mem 0x7cdd6000-0x7cdd6762]
[    0.013094] ACPI: Reserving SSDT table memory at [mem 0x7cdd5000-0x7cdd528f]
[    0.013099] ACPI: Reserving SSDT table memory at [mem 0x7cdd4000-0x7cdd4179]
[    0.013104] ACPI: Reserving SSDT table memory at [mem 0x7cdd3000-0x7cdd3e86]
[    0.013109] ACPI: Reserving FPDT table memory at [mem 0x7cdd2000-0x7cdd2043]
[    0.013113] ACPI: Reserving CSRT table memory at [mem 0x7cdd1000-0x7cdd114b]
[    0.013118] ACPI: Reserving BGRT table memory at [mem 0x7cdcf000-0x7cdcf037]
[    0.013226] No NUMA configuration found
[    0.013231] Faking a node at [mem 0x0000000000000000-0x000000007cdfffff]
[    0.013242] NODE_DATA(0) allocated [mem 0x7ccbc000-0x7ccc0fff]
[    0.013307] Zone ranges:
[    0.013311]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013320]   DMA32    [mem 0x0000000001000000-0x000000007cdfffff]
[    0.013327]   Normal   empty
[    0.013332]   Device   empty
[    0.013336] Movable zone start for each node
[    0.013339] Early memory node ranges
[    0.013342]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.013348]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.013353]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.013358]   node   0: [mem 0x0000000020200000-0x0000000077a2dfff]
[    0.013363]   node   0: [mem 0x0000000077b00000-0x000000007bb9bfff]
[    0.013368]   node   0: [mem 0x000000007bdbc000-0x000000007bdbcfff]
[    0.013373]   node   0: [mem 0x000000007bdbe000-0x000000007bdbffff]
[    0.013378]   node   0: [mem 0x000000007bdc1000-0x000000007c7fffff]
[    0.013383]   node   0: [mem 0x000000007cc00000-0x000000007ccc0fff]
[    0.013388]   node   0: [mem 0x000000007cdf8000-0x000000007cdfffff]
[    0.013394] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cdfffff]
[    0.013408] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013414] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013491] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.023624] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.023983] On node 0, zone DMA32: 210 pages in unavailable ranges
[    0.024008] On node 0, zone DMA32: 544 pages in unavailable ranges
[    0.024014] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.024076] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.024120] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.024136] On node 0, zone DMA32: 311 pages in unavailable ranges
[    0.024576] On node 0, zone DMA32: 12800 pages in unavailable ranges
[    0.024586] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.024596] Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
[    0.024708] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.024724] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.024733] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.024745] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.024751] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.024776] e820: update [mem 0x79353000-0x793aafff] usable ==> reserved
[    0.024821] TSC deadline timer available
[    0.024825] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.024916] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.024927] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.024936] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.024940] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.024949] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.024957] PM: hibernation: Registered nosave memory: [mem 0x77a2e000-0x77a33fff]
[    0.024962] PM: hibernation: Registered nosave memory: [mem 0x77a34000-0x77a3cfff]
[    0.024966] PM: hibernation: Registered nosave memory: [mem 0x77a3d000-0x77afffff]
[    0.024975] PM: hibernation: Registered nosave memory: [mem 0x79353000-0x793aafff]
[    0.024983] PM: hibernation: Registered nosave memory: [mem 0x7bb9c000-0x7bdbbfff]
[    0.024992] PM: hibernation: Registered nosave memory: [mem 0x7bdbd000-0x7bdbdfff]
[    0.025001] PM: hibernation: Registered nosave memory: [mem 0x7bdc0000-0x7bdc0fff]
[    0.025010] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0x7cbfffff]
[    0.025019] PM: hibernation: Registered nosave memory: [mem 0x7ccc1000-0x7cd1ffff]
[    0.025023] PM: hibernation: Registered nosave memory: [mem 0x7cd20000-0x7cd47fff]
[    0.025028] PM: hibernation: Registered nosave memory: [mem 0x7cd48000-0x7cdb7fff]
[    0.025032] PM: hibernation: Registered nosave memory: [mem 0x7cdb8000-0x7cdf7fff]
[    0.025039] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.025044] Booting paravirtualized kernel on bare hardware
[    0.025051] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.040676] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.041705] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
[    0.041738] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
[    0.041750] pcpu-alloc: [0] 0 1 2 3 
[    0.041837] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=PARTUUID=671d634f-f4cb-47e7-831d-78e4331ce909 rw loglevel=3 quiet fbcon=rotate:1 acpi_osi=Linux
[    0.042115] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[    0.042184] random: crng init done
[    0.042819] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.043172] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.043339] Fallback order for Node 0: 0 
[    0.043354] Built 1 zonelists, mobility grouping on.  Total pages: 500637
[    0.043362] Policy zone: DMA32
[    0.044159] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.063488] Memory: 1904796K/2035140K available (16384K kernel code, 2119K rwdata, 12916K rodata, 3432K init, 3828K bss, 130084K reserved, 0K cma-reserved)
[    0.064541] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.064593] Kernel/User page tables isolation: enabled
[    0.064706] ftrace: allocating 48820 entries in 191 pages
[    0.081518] ftrace: allocated 191 pages with 7 groups
[    0.081786] Dynamic Preempt: full
[    0.081939] rcu: Preemptible hierarchical RCU implementation.
[    0.081944] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.081949] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.081953] 	Trampoline variant of Tasks RCU enabled.
[    0.081955] 	Rude variant of Tasks RCU enabled.
[    0.081957] 	Tracing variant of Tasks RCU enabled.
[    0.081960] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.081963] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.093033] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 0
[    0.093159] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.093378] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.093497] Console: colour dummy device 80x25
[    0.093508] printk: legacy console [tty0] enabled
[    0.093681] ACPI: Core revision 20230628
[    0.094080] APIC: Switch to symmetric I/O mode setup
[    0.094159] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
[    0.094180] Calibrating delay loop (skipped), value calculated using timer frequency.. 2667.77 BogoMIPS (lpj=4444443)
[    0.094219] CPU0: Thermal monitoring enabled (TM1)
[    0.094255] process: using mwait in idle threads
[    0.094267] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.094274] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.094286] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.094294] Spectre V2 : Mitigation: Retpolines
[    0.094298] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.094301] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.094305] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.094311] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.094316] MDS: Mitigation: Clear CPU buffers
[    0.094320] MMIO Stale Data: Unknown: No mitigations
[    0.094327] x86/fpu: x87 FPU will use FXSAVE
[    0.097506] Freeing SMP alternatives memory: 40K
[    0.097506] pid_max: default: 32768 minimum: 301
[    0.097506] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.097506] landlock: Up and running.
[    0.097506] Yama: becoming mindful.
[    0.097506] LSM support for eBPF active
[    0.097506] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.097506] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.097506] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.097506] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.097506] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.097506] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.097506] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.097506] ... version:                3
[    0.097506] ... bit width:              40
[    0.097506] ... generic registers:      2
[    0.097506] ... value mask:             000000ffffffffff
[    0.097506] ... max period:             0000007fffffffff
[    0.097506] ... fixed-purpose events:   3
[    0.097506] ... event mask:             0000000700000003
[    0.097506] signal: max sigframe size: 1440
[    0.097506] Estimated ratio of average max frequency by base frequency (times 1024): 1408
[    0.100980] rcu: Hierarchical SRCU implementation.
[    0.100991] rcu: 	Max phase no-delay instances is 1000.
[    0.102468] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.102731] smp: Bringing up secondary CPUs ...
[    0.103317] smpboot: x86: Booting SMP configuration:
[    0.103325] .... node  #0, CPUs:      #1 #2 #3
[    0.104737] smp: Brought up 1 node, 4 CPUs
[    0.104737] smpboot: Max logical packages: 1
[    0.104737] smpboot: Total of 4 processors activated (10670.10 BogoMIPS)
[    0.105340] devtmpfs: initialized
[    0.105340] x86/mm: Memory block size: 128MB
[    0.108493] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.108493] ACPI: PM: Registering ACPI NVS region [mem 0x7cd48000-0x7cdb7fff] (458752 bytes)
[    0.108493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.108493] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.108493] pinctrl core: initialized pinctrl subsystem
[    0.108493] PM: RTC time: 11:10:57, date: 2024-04-12
[    0.111615] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.112042] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.112139] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.112228] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.112269] audit: initializing netlink subsys (disabled)
[    0.112322] audit: type=2000 audit(1712920257.016:1): state=initialized audit_enabled=0 res=1
[    0.112322] thermal_sys: Registered thermal governor 'fair_share'
[    0.112322] thermal_sys: Registered thermal governor 'bang_bang'
[    0.112322] thermal_sys: Registered thermal governor 'step_wise'
[    0.112322] thermal_sys: Registered thermal governor 'user_space'
[    0.112322] thermal_sys: Registered thermal governor 'power_allocator'
[    0.112322] cpuidle: using governor ladder
[    0.112322] cpuidle: using governor menu
[    0.112322] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112322] PCI: ECAM [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) for domain 0000 [bus 00-3f]
[    0.112322] PCI: not using ECAM ([mem 0xe0000000-0xe3ffffff] not reserved)
[    0.112322] PCI: Using configuration type 1 for base access
[    0.112384] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.114349] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.114349] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.115338] ACPI: Added _OSI(Module Device)
[    0.115338] ACPI: Added _OSI(Processor Device)
[    0.115338] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.115338] ACPI: Added _OSI(Processor Aggregator Device)
[    0.115338] ACPI: Added _OSI(Linux)
[    0.161628] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.170047] ACPI: Dynamic OEM Table Load:
[    0.170852] ACPI: SSDT 0xFFFF8A4401A4D800 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.174200] ACPI: Dynamic OEM Table Load:
[    0.174226] ACPI: SSDT 0xFFFF8A4401A4A800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.177847] ACPI: Dynamic OEM Table Load:
[    0.177870] ACPI: SSDT 0xFFFF8A4401D91A00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.180401] ACPI: Dynamic OEM Table Load:
[    0.180423] ACPI: SSDT 0xFFFF8A4401E27300 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.185901] ACPI: _OSC evaluated successfully for all CPUs
[    0.187318] ACPI: Interpreter enabled
[    0.187372] ACPI: PM: (supports S0 S5)
[    0.187378] ACPI: Using IOAPIC for interrupt routing
[    0.190577] PCI: ECAM [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) for domain 0000 [bus 00-3f]
[    0.199215] PCI: [Firmware Info]: ECAM [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.199228] PCI: not using ECAM ([mem 0xe0000000-0xe3ffffff] not reserved)
[    0.199241] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.199247] PCI: Using E820 reservations for host bridge windows
[    0.206224] ACPI: \_SB_.USBC: New power resource
[    0.207428] ACPI: \_SB_.PCI0.XHC1.RHUB.HS03.WWPR: New power resource
[    0.231049] ACPI: \_SB_.I2C1.CLK0: New power resource
[    0.234429] ACPI: \_SB_.I2C2.CLK0: New power resource
[    0.234586] ACPI: \_SB_.I2C2.CLK1: New power resource
[    0.239670] ACPI: \_SB_.P28X: New power resource
[    0.239842] ACPI: \_SB_.P18X: New power resource
[    0.240003] ACPI: \_SB_.P28P: New power resource
[    0.240169] ACPI: \_SB_.P18P: New power resource
[    0.240328] ACPI: \_SB_.P28T: New power resource
[    0.240494] ACPI: \_SB_.P18T: New power resource
[    0.240673] ACPI: \_SB_.P1XT: New power resource
[    0.247348] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.247375] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.247384] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.247609] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.247649] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.248864] PCI host bridge to bus 0000:00
[    0.248875] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.248884] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.248892] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.248899] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.248908] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.248915] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.248922] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
[    0.248929] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90affffe window]
[    0.248935] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.248943] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.248984] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 conventional PCI endpoint
[    0.249274] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 conventional PCI endpoint
[    0.249295] pci 0000:00:02.0: BAR 0 [mem 0x90000000-0x903fffff]
[    0.249313] pci 0000:00:02.0: BAR 2 [mem 0x80000000-0x8fffffff pref]
[    0.249329] pci 0000:00:02.0: BAR 4 [io  0x1000-0x1007]
[    0.249361] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.249373] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.249667] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 conventional PCI endpoint
[    0.249696] pci 0000:00:14.0: BAR 0 [mem 0x90a00000-0x90a0ffff 64bit]
[    0.249776] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.250034] pci 0000:00:16.0: [8086:0f37] type 00 class 0x0c0380 conventional PCI endpoint
[    0.250058] pci 0000:00:16.0: BAR 0 [mem 0x90400000-0x905fffff]
[    0.250072] pci 0000:00:16.0: BAR 1 [mem 0x90a2c000-0x90a2cfff]
[    0.250146] pci 0000:00:16.0: PME# supported from D0 D3hot
[    0.250383] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 conventional PCI endpoint
[    0.250412] pci 0000:00:1a.0: BAR 0 [mem 0x90900000-0x909fffff]
[    0.250429] pci 0000:00:1a.0: BAR 1 [mem 0x90800000-0x908fffff]
[    0.250529] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.250765] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 conventional PCI endpoint
[    0.252759] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.252769] ACPI: PCI: Interrupt link LNKA disabled
[    0.253085] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.253094] ACPI: PCI: Interrupt link LNKB disabled
[    0.253409] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.253417] ACPI: PCI: Interrupt link LNKC disabled
[    0.253732] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.253740] ACPI: PCI: Interrupt link LNKD disabled
[    0.254053] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.254062] ACPI: PCI: Interrupt link LNKE disabled
[    0.254384] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.254392] ACPI: PCI: Interrupt link LNKF disabled
[    0.254708] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.254716] ACPI: PCI: Interrupt link LNKG disabled
[    0.255031] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.255039] ACPI: PCI: Interrupt link LNKH disabled
[    0.258587] Low-power S0 idle used by default for system suspend
[    0.271465] ACPI: \_SB_.LPEA.PLPE: New power resource
[    0.294196] iommu: Default domain type: Translated
[    0.294205] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.294858] SCSI subsystem initialized
[    0.294892] libata version 3.00 loaded.
[    0.294892] ACPI: bus type USB registered
[    0.294892] usbcore: registered new interface driver usbfs
[    0.294892] usbcore: registered new interface driver hub
[    0.294892] usbcore: registered new device driver usb
[    0.458197] EDAC MC: Ver: 3.0.0
[    0.458327] efivars: Registered efivars operations
[    0.458327] NetLabel: Initializing
[    0.458327] NetLabel:  domain hash size = 128
[    0.458329] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.458393] NetLabel:  unlabeled traffic allowed by default
[    0.458414] mctp: management component transport protocol core
[    0.458419] NET: Registered PF_MCTP protocol family
[    0.458432] PCI: Using ACPI for IRQ routing
[    0.458438] PCI: pci_cache_line_size set to 64 bytes
[    0.458470] resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.458477] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.458485] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.458491] e820: reserve RAM buffer [mem 0x77a2e000-0x77ffffff]
[    0.458496] e820: reserve RAM buffer [mem 0x79353000-0x7bffffff]
[    0.458502] e820: reserve RAM buffer [mem 0x7bb9c000-0x7bffffff]
[    0.458507] e820: reserve RAM buffer [mem 0x7bdbd000-0x7bffffff]
[    0.458512] e820: reserve RAM buffer [mem 0x7bdc0000-0x7bffffff]
[    0.458517] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[    0.458525] e820: reserve RAM buffer [mem 0x7ccc1000-0x7fffffff]
[    0.458536] e820: reserve RAM buffer [mem 0x7ce00000-0x7fffffff]
[    0.460885] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.460885] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.460885] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.460891] vgaarb: loaded
[    0.461148] clocksource: Switched to clocksource tsc-early
[    0.461644] VFS: Disk quotas dquot_6.6.0
[    0.461693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.462016] pnp: PnP ACPI init
[    0.462393] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.462407] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.462415] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.462422] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.462429] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.469470] pnp: PnP ACPI: found 3 devices
[    0.476181] NET: Registered PF_INET protocol family
[    0.476347] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.516124] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.516206] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.516249] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.516446] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.516670] TCP: Hash tables configured (established 16384 bind 16384)
[    0.516899] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.516968] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.517011] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.517147] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.517180] NET: Registered PF_XDP protocol family
[    0.517206] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.517217] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.517224] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.517231] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.517238] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
[    0.517245] pci_bus 0000:00: resource 9 [mem 0x90c00000-0x90ffffff window]
[    0.517252] pci_bus 0000:00: resource 10 [mem 0x7d000001-0x7f000000 window]
[    0.517259] pci_bus 0000:00: resource 11 [mem 0x80000000-0x90affffe window]
[    0.517266] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed40fff window]
[    0.517923] PCI: CLS 64 bytes, default 64
[    0.518088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
[    0.518107] Trying to unpack rootfs image as initramfs...
[    0.518140] clocksource: Switched to clocksource tsc
[    0.523118] Initialise system trusted keyrings
[    0.523156] Key type blacklist registered
[    0.523326] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[    0.523373] zbud: loaded
[    0.524015] integrity: Platform Keyring initialized
[    0.524030] integrity: Machine keyring initialized
[    0.579832] Key type asymmetric registered
[    0.579845] Asymmetric key parser 'x509' registered
[    0.579928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.580108] io scheduler mq-deadline registered
[    0.580115] io scheduler kyber registered
[    0.580161] io scheduler bfq registered
[    0.580696] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.581604] ACPI: found native INT33F4 PMIC, skipping ACPI AC and battery devices
[    0.589944] ACPI: thermal: [Firmware Bug]: No valid trip points!
[    0.591237] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.591627] 00:02: ttyS0 at I/O 0x3f8 (irq = 113, base_baud = 115200) is a 16550A
[    0.614285] hpet: number irqs doesn't agree with number of timers
[    0.614512] Non-volatile memory driver v1.3
[    0.614520] Linux agpgart interface v0.103
[    0.614978] ACPI: bus type drm_connector registered
[    0.619539] usbcore: registered new interface driver usbserial_generic
[    0.619568] usbserial: USB Serial support registered for generic
[    0.620279] rtc_cmos 00:00: registered as rtc0
[    0.620328] rtc_cmos 00:00: setting system clock to 2024-04-12T11:10:58 UTC (1712920258)
[    0.620417] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    0.621646] intel_pstate: Intel P-state driver initializing
[    0.624579] ledtrig-cpu: registered to indicate activity on CPUs
[    0.626053] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.628472] fbcon: Deferring console take-over
[    0.628486] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.628673] hid: raw HID events driver (C) Jiri Kosina
[    0.629055] drop_monitor: Initializing network drop monitor service
[    0.629283] NET: Registered PF_INET6 protocol family
[    0.794827] Freeing initrd memory: 18724K
[    0.835379] Segment Routing with IPv6
[    0.835400] RPL Segment Routing with IPv6
[    0.835484] In-situ OAM (IOAM) with IPv6
[    0.835688] NET: Registered PF_PACKET protocol family
[    0.840980] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.842364] microcode: Current revision: 0x00000838
[    0.842378] microcode: Updated early from: 0x0000082b
[    0.845289] IPI shorthand broadcast: enabled
[    0.861654] sched_clock: Marking stable (860008112, 980940)->(923102511, -62113459)
[    0.865064] registered taskstats version 1
[    0.869402] Loading compiled-in X.509 certificates
[    0.901645] Loaded X.509 cert 'Build time autogenerated kernel key: aeceb796ce2d10619dbe03b9ae622fca695d6d49'
[    0.917307] zswap: loaded using pool zstd/zsmalloc
[    0.924716] Key type .fscrypt registered
[    0.924739] Key type fscrypt-provisioning registered
[    0.959307] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    0.977641] PM:   Magic number: 4:670:175
[    0.977769] acpi device:0b: hash matches
[    0.989965] RAS: Correctable Errors collector initialized.
[    1.021822] clk: Disabling unused clocks
[    1.052269] Freeing unused decrypted memory: 2028K
[    1.055024] Freeing unused kernel image (initmem) memory: 3432K
[    1.055629] Write protecting the kernel read-only data: 30720k
[    1.058915] Freeing unused kernel image (rodata/data gap) memory: 1420K
[    1.158286] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.158300] rodata_test: all tests were successful
[    1.158315] x86/mm: Checking user space page tables
[    1.238935] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.238948] Run /init as init process
[    1.238952]   with arguments:
[    1.238956]     /init
[    1.238958]   with environment:
[    1.238961]     HOME=/
[    1.238963]     TERM=linux
[    1.238966]     BOOT_IMAGE=/vmlinuz-linux
[    1.302046] systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    1.302068] systemd[1]: Detected architecture x86-64.
[    1.302078] systemd[1]: Running in initrd.
[    1.302748] systemd[1]: Initializing machine ID from random generator.
[    1.432249] systemd[1]: Queued start job for default target Initrd Default Target.
[    1.484345] systemd[1]: Expecting device /dev/disk/by-partuuid/671d634f-f4cb-47e7-831d-78e4331ce909...
[    1.484626] systemd[1]: Reached target Path Units.
[    1.484685] systemd[1]: Reached target Slice Units.
[    1.484743] systemd[1]: Reached target Swaps.
[    1.484814] systemd[1]: Reached target Timer Units.
[    1.485366] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.485856] systemd[1]: Listening on Journal Socket.
[    1.486414] systemd[1]: Listening on udev Control Socket.
[    1.486823] systemd[1]: Listening on udev Kernel Socket.
[    1.486886] systemd[1]: Reached target Socket Units.
[    1.486991] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.8.5-arch1-1/modules.devname).
[    1.487165] systemd[1]: Check battery level during early boot was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/class/power_supply).
[    1.493254] systemd[1]: Started Displays emergency message in full screen..
[    1.500215] systemd[1]: Starting Journal Service...
[    1.503827] systemd[1]: Starting Load Kernel Modules...
[    1.503939] systemd[1]: TPM2 PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    1.511575] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.514645] systemd[1]: Starting Coldplug All udev Devices...
[    1.544617] systemd[1]: Finished Load Kernel Modules.
[    1.560147] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.560510] systemd[1]: Reached target Preparation for Local File Systems.
[    1.560571] systemd[1]: Reached target Local File Systems.
[    1.564707] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    1.569519] systemd-journald[96]: Collecting audit messages is disabled.
[    1.643440] systemd[1]: Started Journal Service.
[    2.198030] sdhci: Secure Digital Host Controller Interface driver
[    2.198042] sdhci: Copyright(c) Pierre Ossman
[    2.208441] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.208465] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.209573] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    2.209968] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.209984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.209996] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.210164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[    2.210175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.210181] usb usb1: Product: xHCI Host Controller
[    2.210185] usb usb1: Manufacturer: Linux 6.8.5-arch1-1 xhci-hcd
[    2.210190] usb usb1: SerialNumber: 0000:00:14.0
[    2.210588] hub 1-0:1.0: USB hub found
[    2.210625] hub 1-0:1.0: 6 ports detected
[    2.222020] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    2.242334] mmc1: SDHCI controller on ACPI [80860F14:02] using ADMA
[    2.242769] mmc2: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.289266] mmc0: new high speed SDIO card at address 0001
[    2.759822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[    2.759860] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.759881] usb usb2: Product: xHCI Host Controller
[    2.759896] usb usb2: Manufacturer: Linux 6.8.5-arch1-1 xhci-hcd
[    2.759910] usb usb2: SerialNumber: 0000:00:14.0
[    2.761148] hub 2-0:1.0: USB hub found
[    2.761194] hub 2-0:1.0: 1 port detected
[    2.881274] mmc2: new HS200 MMC card at address 0001
[    2.907787] mmcblk2: mmc2:0001 NCard  28.9 GiB
[    2.919142]  mmcblk2: p1 p2
[    2.920596] mmcblk2boot0: mmc2:0001 NCard  4.00 MiB
[    2.922291] mmcblk2boot1: mmc2:0001 NCard  4.00 MiB
[    2.923632] mmcblk2rpmb: mmc2:0001 NCard  4.00 MiB, chardev (244:0)
[    3.011017] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    3.160970] usb 1-1: New USB device found, idVendor=3938, idProduct=1031, bcdDevice= 1.08
[    3.161119] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.161141] usb 1-1: Product: 2.4G Wireless Mouse
[    3.161156] usb 1-1: Manufacturer: MOSART Semi.
[    4.250656] EXT4-fs (mmcblk2p2): mounted filesystem b6b596bf-9656-43fd-bd96-917fee90427a r/w with ordered data mode. Quota mode: none.
[    4.786896] systemd-journald[96]: Received SIGTERM from PID 1 (systemd).
[    5.222729] systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    5.222751] systemd[1]: Detected architecture x86-64.
[    5.227035] systemd[1]: Hostname set to <onda>.
[    5.868353] systemd[1]: bpf-lsm: LSM BPF program attached
[    6.932395] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[    6.932957] systemd[1]: Stopped Switch Root.
[    6.936051] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    6.937845] systemd[1]: Created slice Slice /system/dirmngr.
[    6.939170] systemd[1]: Created slice Slice /system/getty.
[    6.940399] systemd[1]: Created slice Slice /system/gpg-agent.
[    6.941688] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    6.943105] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    6.944636] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    6.946110] systemd[1]: Created slice Slice /system/keyboxd.
[    6.947562] systemd[1]: Created slice Slice /system/modprobe.
[    6.948740] systemd[1]: Created slice User and Session Slice.
[    6.949059] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.949313] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.950026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.950105] systemd[1]: Expecting device /dev/disk/by-uuid/9B6B-90FA...
[    6.950170] systemd[1]: Reached target Local Encrypted Volumes.
[    6.950238] systemd[1]: Reached target Login Prompts.
[    6.950308] systemd[1]: Stopped target Switch Root.
[    6.950376] systemd[1]: Stopped target Initrd File Systems.
[    6.950425] systemd[1]: Stopped target Initrd Root File System.
[    6.950494] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.950589] systemd[1]: Reached target Path Units.
[    6.950664] systemd[1]: Reached target Remote File Systems.
[    6.950723] systemd[1]: Reached target Slice Units.
[    6.950826] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.952703] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.954969] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.961964] systemd[1]: Listening on Process Core Dump Socket.
[    6.962092] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.962775] systemd[1]: Listening on udev Control Socket.
[    6.963257] systemd[1]: Listening on udev Kernel Socket.
[    7.012332] systemd[1]: Mounting Huge Pages File System...
[    7.016883] systemd[1]: Mounting POSIX Message Queue File System...
[    7.020160] systemd[1]: Mounting Kernel Debug File System...
[    7.024997] systemd[1]: Mounting Kernel Trace File System...
[    7.031581] systemd[1]: Starting Create List of Static Device Nodes...
[    7.040918] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    7.048254] systemd[1]: Starting Load Kernel Module configfs...
[    7.055018] systemd[1]: Starting Load Kernel Module dm_mod...
[    7.058984] systemd[1]: Starting Load Kernel Module drm...
[    7.064917] systemd[1]: Starting Load Kernel Module fuse...
[    7.073164] systemd[1]: Starting Load Kernel Module loop...
[    7.091705] systemd[1]: Starting Journal Service...
[    7.108172] systemd[1]: Starting Load Kernel Modules...
[    7.108239] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.118577] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.118751] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.124669] systemd[1]: Starting Coldplug All udev Devices...
[    7.136529] systemd[1]: Mounted Huge Pages File System.
[    7.137062] systemd[1]: Mounted POSIX Message Queue File System.
[    7.137492] systemd[1]: Mounted Kernel Debug File System.
[    7.142281] device-mapper: uevent: version 1.0.3
[    7.144743] systemd[1]: Mounted Kernel Trace File System.
[    7.145422] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    7.145663] systemd[1]: Finished Create List of Static Device Nodes.
[    7.146960] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    7.147542] systemd[1]: Finished Load Kernel Module configfs.
[    7.159115] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    7.168250] systemd[1]: Finished Load Kernel Module dm_mod.
[    7.169619] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    7.174463] systemd[1]: Finished Load Kernel Module drm.
[    7.176459] fuse: init (API version 7.39)
[    7.177378] loop: module loaded
[    7.179894] systemd[1]: Mounting Kernel Configuration File System...
[    7.188223] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    7.189921] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    7.203516] systemd[1]: Finished Load Kernel Module fuse.
[    7.205008] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    7.205641] systemd[1]: Finished Load Kernel Module loop.
[    7.214492] systemd[1]: Mounting FUSE Control File System...
[    7.214704] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    7.217132] systemd[1]: Mounted Kernel Configuration File System.
[    7.223986] systemd-journald[190]: Collecting audit messages is disabled.
[    7.228285] EXT4-fs (mmcblk2p2): re-mounted b6b596bf-9656-43fd-bd96-917fee90427a r/w. Quota mode: none.
[    7.233392] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    7.234796] systemd[1]: Finished Remount Root and Kernel File Systems.
[    7.238988] systemd[1]: Activating swap /swapfile...
[    7.244870] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[    7.255109] systemd[1]: Starting Load/Save OS Random Seed...
[    7.255185] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.264433] systemd[1]: Mounted FUSE Control File System.
[    7.264816] systemd[1]: Started Journal Service.
[    7.265855] Asymmetric key parser 'pkcs8' registered
[    7.287058] Adding 2097148k swap on /swapfile.  Priority:-2 extents:38 across:16089088k SS
[    7.350398] systemd-journald[190]: Received client request to flush runtime journal.
[    7.364853] systemd-journald[190]: /var/log/journal/43603586618c412c8cc4211752718790/system.journal: Journal file uses a different sequence number ID, rotating.
[    7.364878] systemd-journald[190]: Rotating system journal.
[    8.235277] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.235297] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.235309] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.235321] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.235332] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.235343] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.235354] acpi PNP0C14:00: duplicate WMI GUID D45269A2-850C-4B7E-A1F8-95635A7A8BA0 (first instance was on PNP0C14:00)
[    8.265980] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.275008] 80860F0A:00: ttyS4 at MMIO 0x90b19000 (irq = 97, base_baud = 2764800) is a 16550A
[    8.282711] serial serial0: tty port ttyS4 registered
[    8.298337] 80860F0A:01: ttyS5 at MMIO 0x90b1b000 (irq = 98, base_baud = 2764800) is a 16550A
[    8.314153] silead_ts i2c-MSSL1680:00: supply vddio not found, using dummy regulator
[    8.314259] silead_ts i2c-MSSL1680:00: supply avdd not found, using dummy regulator
[    8.319804] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000
[    8.340194] mc: Linux media interface: v0.10
[    8.479393] videodev: Linux video capture interface: v2.00
[    8.483287] byt_gpio INT33FC:02: [Firmware Bug]: Pin 21: forcibly re-configured as GPIO
[    8.485520] gpio gpiochip3: (INT0002 Virtual GPIO): not an immutable chip, please consider fixing it!
[    8.485927] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    8.515216] Consider using thermal netlink events interface
[    8.557467] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    8.774841] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    8.811484] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    8.975706] Bluetooth: Core ver 2.22
[    8.975776] NET: Registered PF_BLUETOOTH protocol family
[    8.975782] Bluetooth: HCI device and connection manager initialized
[    8.975793] Bluetooth: HCI socket layer initialized
[    8.975800] Bluetooth: L2CAP socket layer initialized
[    8.975813] Bluetooth: SCO socket layer initialized
[    8.978941] usbcore: registered new interface driver usbhid
[    8.978952] usbhid: USB HID core driver
[    8.991507] bmc150_accel_i2c i2c-BMA250E:00: mounting matrix not found: using identity...
[    8.991526] bmc150_accel_i2c i2c-BMA250E:00: supply vdd not found, using dummy regulator
[    8.991631] bmc150_accel_i2c i2c-BMA250E:00: supply vddio not found, using dummy regulator
[    9.271540] Bluetooth: HCI UART driver ver 2.3
[    9.271554] Bluetooth: HCI UART protocol H4 registered
[    9.271559] Bluetooth: HCI UART protocol BCSP registered
[    9.271618] Bluetooth: HCI UART protocol LL registered
[    9.271624] Bluetooth: HCI UART protocol ATH3K registered
[    9.271684] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    9.271848] Bluetooth: HCI UART protocol Intel registered
[    9.272029] Bluetooth: HCI UART protocol Broadcom registered
[    9.272066] Bluetooth: HCI UART protocol QCA registered
[    9.272072] Bluetooth: HCI UART protocol AG6XX registered
[    9.272101] Bluetooth: HCI UART protocol Marvell registered
[    9.344994] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    9.424592] mei_txe 0000:00:1a.0: wait for readiness failed
[    9.424605] mei_txe 0000:00:1a.0: waiting for readiness failed
[    9.424617] mei_txe 0000:00:1a.0: hw_start failed ret = -62 fw status = 1F365195 15150000 
[    9.510753] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.511846] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.512588] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    9.512778] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    9.512788] cfg80211: failed to load regulatory.db
[    9.858491] input: silead_ts as /devices/platform/80860F41:03/i2c-3/i2c-MSSL1680:00/input/input1
[   10.028361] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   10.033071] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   10.033085] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin
[   10.036322] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin
[   10.061331] Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508
[   10.438161] mei_txe 0000:00:1a.0: wait for readiness failed
[   10.438188] mei_txe 0000:00:1a.0: waiting for readiness failed
[   10.438215] mei_txe 0000:00:1a.0: hw_start failed ret = -62 fw status = 1F365195 15150000 
[   10.919911] cryptd: max_cpu_qlen set to 1000
[   10.951166] i915 0000:00:02.0: vgaarb: deactivate vga console
[   11.014937] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[   11.015296] intel_sst_acpi 80860F28:00: LPE base: 0x91000000 size:0x200000
[   11.015305] intel_sst_acpi 80860F28:00: IRAM base: 0x910c0000
[   11.015342] intel_sst_acpi 80860F28:00: DRAM base: 0x91100000
[   11.015357] intel_sst_acpi 80860F28:00: SHIM base: 0x91140000
[   11.015379] intel_sst_acpi 80860F28:00: Mailbox base: 0x91144000
[   11.015394] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[   11.015888] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[   11.052430] iTCO_vendor_support: vendor-support=0
[   11.052634] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[   11.072404] SSE version of gcm_enc/dec engaged.
[   11.083899] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.084425] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[   11.096000] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[   11.107916] i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
[   11.108510] i915 display info: display version: 7
[   11.108520] i915 display info: cursor_needs_physical: no
[   11.108525] i915 display info: has_cdclk_crawl: no
[   11.108528] i915 display info: has_cdclk_squash: no
[   11.108532] i915 display info: has_ddi: no
[   11.108535] i915 display info: has_dp_mst: no
[   11.108539] i915 display info: has_dsb: no
[   11.108568] i915 display info: has_fpga_dbg: no
[   11.108573] i915 display info: has_gmch: yes
[   11.108577] i915 display info: has_hotplug: yes
[   11.108610] i915 display info: has_hti: no
[   11.108615] i915 display info: has_ipc: no
[   11.108618] i915 display info: has_overlay: no
[   11.108640] i915 display info: has_psr: no
[   11.108646] i915 display info: has_psr_hw_tracking: no
[   11.108649] i915 display info: overlay_needs_physical: no
[   11.108653] i915 display info: supports_tv: no
[   11.108656] i915 display info: has_hdcp: no
[   11.108659] i915 display info: has_dmc: no
[   11.108662] i915 display info: has_dsc: no
[   11.167381] fbcon: i915drmfb (fb0) is primary device
[   11.167391] fbcon: Deferring console take-over
[   11.167400] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   11.258755] pnetdev = 00000000fc358ca3
[   11.265145] iTCO_wdt iTCO_wdt.0.auto: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   11.282910] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
[   11.369647] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.1.auto/input/input3
[   11.369998] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.2.auto/input/input4
[   11.457903] mei_txe 0000:00:1a.0: wait for readiness failed
[   11.457916] mei_txe 0000:00:1a.0: waiting for readiness failed
[   11.457928] mei_txe 0000:00:1a.0: hw_start failed ret = -62 fw status = 1F365195 15150000 
[   11.457949] mei_txe 0000:00:1a.0: reset: reached maximal consecutive resets: disabling the device
[   11.457956] mei_txe 0000:00:1a.0: reset failed ret = -19
[   11.457961] mei_txe 0000:00:1a.0: link layer initialization failed.
[   11.457965] mei_txe 0000:00:1a.0: init hw failure.
[   11.458317] mei_txe 0000:00:1a.0: initialization failed.
[   11.561200] dwc3 dwc3: changing max_speed on rev 5533210a
[   11.570375] intel_rapl_common: Found RAPL domain package
[   11.570387] intel_rapl_common: Found RAPL domain core
[   11.616907] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input5
[   11.640325] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:3938:1031.0001/input/input6
[   11.646362] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:3938:1031.0001/input/input7
[   11.647806] hid-generic 0003:3938:1031.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-1/input0
[   11.955963] bytcr_rt5651 bytcr_rt5651: BIOS Routing: AIF1 connected
[   11.956032] bytcr_rt5651 bytcr_rt5651: quirk IN2_MAP enabled
[   11.956039] bytcr_rt5651 bytcr_rt5651: quirk realtek,jack-detect-source 1
[   11.956045] bytcr_rt5651 bytcr_rt5651: quirk realtek,over-current-threshold-microamp 2000
[   11.956050] bytcr_rt5651 bytcr_rt5651: quirk realtek,over-current-scale-factor 1
[   11.956054] bytcr_rt5651 bytcr_rt5651: quirk MCLK_EN enabled
[   11.956058] bytcr_rt5651 bytcr_rt5651: quirk SSP0_AIF1 enabled
[   11.993596] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input8
[   11.997087] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input9
[   12.031163] Creating 1 MTD partitions on "intel-spi":
[   12.031182] 0x000000000000-0x000000800000 : "BIOS"
[   12.038931] input: bytcr-rt5651 Headset as /devices/platform/80860F28:00/bytcr_rt5651/sound/card1/input10
[   12.061090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.061103] Bluetooth: BNEP filters: protocol multicast
[   12.061116] Bluetooth: BNEP socket layer initialized
[   12.088779] mousedev: PS/2 mouse device common for all mice
[   12.091036] Bluetooth: hci0: command 0xfc20 tx timeout
[   12.091070] Bluetooth: hci0: RTL: download fw command failed (-110)
[   12.131962] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   17.993779] systemd-journald[190]: /var/log/journal/43603586618c412c8cc4211752718790/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   22.547754] i2c i2c-OVTI2680:00: deferred probe pending: ov2680: waiting for fwnode graph endpoint
[   24.027062] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[  116.094601] usb 1-1: USB disconnect, device number 2
[  132.213728] usb 1-1: new full-speed USB device number 3 using xhci_hcd
[  132.355224] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
[  132.355262] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  132.355283] usb 1-1: Product: USB Hub 2.0
[  132.355297] usb 1-1: Manufacturer: ALCOR
[  132.360738] hub 1-1:1.0: USB hub found
[  132.360912] hub 1-1:1.0: 4 ports detected
[  132.640208] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd
[  132.741697] usb 1-1.2: New USB device found, idVendor=3938, idProduct=1031, bcdDevice= 1.08
[  132.741734] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  132.741754] usb 1-1.2: Product: 2.4G Wireless Mouse
[  132.741769] usb 1-1.2: Manufacturer: MOSART Semi.
[  132.748181] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:3938:1031.0002/input/input11
[  132.748805] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:3938:1031.0002/input/input12
[  132.749587] hid-generic 0003:3938:1031.0002: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-1.2/input0
[  132.823568] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd
[  132.922679] usb 1-1.3: New USB device found, idVendor=145f, idProduct=02c9, bcdDevice= 1.01
[  132.922704] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  132.922716] usb 1-1.3: Product: Trust Keyboard
[  132.922724] usb 1-1.3: Manufacturer: SIGMACHIP
[  132.930023] input: SIGMACHIP Trust Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:145F:02C9.0003/input/input13
[  132.985104] hid-generic 0003:145F:02C9.0003: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP Trust Keyboard] on usb-0000:00:14.0-1.3/input0
[  132.991470] input: SIGMACHIP Trust Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:145F:02C9.0004/input/input14
[  133.047873] input: SIGMACHIP Trust Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:145F:02C9.0004/input/input15
[  133.049415] hid-generic 0003:145F:02C9.0004: input,hidraw2: USB HID v1.10 Device [SIGMACHIP Trust Keyboard] on usb-0000:00:14.0-1.3/input1

Any suggestion ?
Maurizio.

Last edited by Maurizio Ferreira (2024-05-01 06:02:27)

loqs · 2024-04-12 14:25:22

Is the issue still present in linux-mainline 6.9-rc3? Have you considered bisecting between linux 6.7.6 and 6.7.7?

Maurizio Ferreira · 2024-04-12 16:48:18

I'll try 6.9-rc3 and eventually I'll try to bisect, but I don't know if I'm able to do that because:

1) I've never done that.
2) The target machine is a tablet with a 1.33 gHz cpu (Atom Z3735f) , 2Gb of ram and 32 gb of emmc.

loqs · 2024-04-12 18:28:02

You can obtain linux-mainline prebuilt from miffe's repo. I can provide you the bisection kernels prebuilt if that helps.

Maurizio Ferreira · 2024-04-13 09:11:18

I installed the linux-mainline from the miffe's repo, but it exibits the same behaviour and the same error message.
I tried to compile the linux-mainline kernel on a slight powerfuil machine (cpu n4100, 8gb ram, 256 gb ssd)
in order to start to bisect the kernel. It's 2 hours and an half that it's woking, and I don't know when (and if) it will terminate correctly. I've never useg git, apart to dowload and install some AUR package, and I've read the
page relative to git-bisect, that I find a little intimidating.
I'll try to do it. but if I have to compile the kernel several time, it will took ages.
I've another option : a very powerful machine with 64 Gb ram and 4 Tb ssd, bu unfortunately on it I have installed a different Linux distro.
However on this machine I have created a vm with an istance of Linux Arch. I'll try to do the bisect on it.
Best regards.
Maurizio.

Nebulosa · 2024-04-13 11:40:57

Try to reduce compile time by using Modprobed-db

Btw, only MHz of CPU and number of threads matters when you compile a kernel or something huge like that.

You could also check my "kernel bisect experience" which I wrote in this note for future using by myself.

Maurizio Ferreira · 2024-05-01 06:00:40

It seems that last kernel version (6.8.8-arch1-1) solves the problem. Thanks

Arch Linux

#1 2024-04-12 12:14:07

[SOLVED] New kernel(s) breaks bluetooth on my system.

#2 2024-04-12 14:25:22

Re: [SOLVED] New kernel(s) breaks bluetooth on my system.

#3 2024-04-12 16:48:18

Re: [SOLVED] New kernel(s) breaks bluetooth on my system.

#4 2024-04-12 18:28:02

Re: [SOLVED] New kernel(s) breaks bluetooth on my system.

#5 2024-04-13 09:11:18

Re: [SOLVED] New kernel(s) breaks bluetooth on my system.

#6 2024-04-13 11:40:57

Re: [SOLVED] New kernel(s) breaks bluetooth on my system.

#7 2024-05-01 06:00:40

Re: [SOLVED] New kernel(s) breaks bluetooth on my system.

Board footer