You are not logged in.
- Topics: Active | Unanswered
#1 2024-08-01 07:30:06
- RCrate
- Member
- Registered: 2024-08-01
- Posts: 4
[SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
Hello, I've been using Arch Linux for a month now and it's been working great. However, when I am playing Counter-Strike 2 using Steam, at a random point in time the game starts gradually losing FPS for a few seconds and then my whole desktop is unresponsive. The mouse moves extremely slowly and my keystrokes either don't get registered or get registered after a few minutes. If there was any music playing during this, it will sound more and more crippled until it stops completely. At this point I am forced to shut down my computer through the physical power button. There is no specific setup or action in the game that makes this happen, it can happen during rounds, at the start of the round, even in the main menu. It has never happened earlier than ~30 minutes of being in-game, though.
This hasn't happened only with CS2 though, the DE hanging with the exact same symptoms also happened to me when I was installing an AUR package of Mullvad VPN. While in the building process, Plasma would always hang when it got to 165/170 and the installation would stop. This occurred with both yay and makepkg. I tried first switching to tty3 and then installing the AUR package, which worked with no problems, so I am sure the DE is the one at fault.
The only way I found to recover my session without force restarting is to quickly switch to tty3 (which also lags when entering your login) and kill the CS2 process using htop.
CPU: AMD Ryzen 7 5700G (16) @ 4.67 GHz
GPU: NVIDIA GeForce GTX 1050 Ti [Discrete]
Kernel: 6.6.42-1-lts
DE: KDE Plasma 6.1.3
WM: KWin (Wayland)
Nvidia driver installed is nvidia-lts
Journalctl as the CS2 hang happens:
Jul 31 21:24:35 archlinux wpa_supplicant[937]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=0 signal=-67 noise=9999 txrate=648500
Jul 31 21:24:40 archlinux wpa_supplicant[937]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-63 noise=9999 txrate=648500
Jul 31 21:28:06 archlinux mullvad-daemon[936]: [mullvad_daemon::relay_list][DEBUG] Relay list is up-to-date
Jul 31 21:28:08 archlinux mullvad-vpn[1432]: [2024-07-31 21:28:08.580][verbose] GRPC Channel connectivity state changed to 2
Jul 31 21:29:59 archlinux pipewire[1019]: pw.node: (alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo-61) xrun state:0x755331b0f008 pending:3/3 s:14547161043491 a:14547155713322 f:14547155718491 waiting:18446744073704221447 process:5169 status:triggered (0 suppressed)
Jul 31 21:30:19 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:19 archlinux systemd[1]: Started Getty on tty3.
Jul 31 21:30:20 archlinux pipewire[1019]: pw.node: (Dummy-Driver-29) graph xrun (0 suppressed)
Jul 31 21:30:21 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:21 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:22 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "@DEFAULT_SINK@"
Jul 31 21:30:22 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "@DEFAULT_SOURCE@"
Jul 31 21:30:23 archlinux pipewire[1019]: pw.node: (Dummy-Driver-29) graph xrun (2 suppressed)
Jul 31 21:30:32 archlinux pipewire[1019]: pw.node: (auto_null-61) graph xrun (0 suppressed)
Jul 31 21:30:35 archlinux pipewire[1019]: pw.node: (auto_null-61) graph xrun (11 suppressed)
Jul 31 21:30:35 archlinux pipewire[1019]: pw.node: (Dummy-Driver-29) graph xrun (5 suppressed)
Jul 31 21:30:38 archlinux pipewire[1019]: pw.node: (auto_null-61) graph xrun (6 suppressed)
Jul 31 21:30:40 archlinux pipewire[1019]: pw.node: (Dummy-Driver-29) graph xrun (0 suppressed)
Jul 31 21:30:40 archlinux pipewire[1019]: pw.node: (Audio Stream-324) xrun state:0x755322dbf008 pending:0/1 s:14587549888633 a:14587528593031 f:14587528597780 waiting:18446744073688256014 process:4749 status:triggered
Jul 31 21:30:40 archlinux pipewire[1019]: pw.node: (auto_null-61) graph xrun (13 suppressed)
Jul 31 21:30:45 archlinux systemd-journald[403]: Under memory pressure, flushing caches.
Jul 31 21:30:42 archlinux login[26111]: pam_systemd_home(login:auth): New sd-bus connection (system-bus-pam-systemd-home-26111) opened.
Jul 31 21:30:44 archlinux systemd-logind[841]: New session 4 of user fabian.
Jul 31 21:30:42 archlinux rtkit-daemon[1031]: Successfully made thread 26125 of process 23245 owned by '1000' RT at priority 20.
Jul 31 21:30:44 archlinux systemd[1]: Started Session 4 of User fabian.
Jul 31 21:30:42 archlinux rtkit-daemon[1031]: Supervising 19 threads of 8 processes of 1 users.
Jul 31 21:30:44 archlinux pipewire[1019]: mod.client-node: detected old client version 4
Jul 31 21:30:43 archlinux login[26111]: pam_unix(login:auth): user [fabian] has blank password; authenticated without it
Jul 31 21:30:46 archlinux pipewire[1019]: pw.node: (auto_null-61) graph xrun (13 suppressed)
Jul 31 21:30:44 archlinux login[26111]: pam_unix(login:session): session opened for user fabian(uid=1000) by fabian(uid=0)
Jul 31 21:30:46 archlinux pipewire-pulse[1022]: spa.audioconvert: 0x613e191faec0: (0 suppressed) out of buffers on port 0 1
Jul 31 21:30:44 archlinux login[26111]: pam_systemd(login:session): New sd-bus connection (system-bus-pam-systemd-26111) opened.
Jul 31 21:30:46 archlinux pipewire[1019]: pw.node: (WEBRTC VoiceEngine-329) xrun state:0x755322d50008 pending:0/1 s:14593775457293 a:14593775477617 f:14593770151290 waiting:20324 process:18446744073704225289 status:awake
Jul 31 21:30:44 archlinux login[26111]: LOGIN ON tty3 BY fabian
Jul 31 21:30:51 archlinux wpa_supplicant[937]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=0 signal=-64 noise=9999 txrate=720600
Jul 31 21:30:54 archlinux wireplumber[1020]: spa.bluez5: BlueZ system service is not available
Jul 31 21:30:55 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "auto_null"
Jul 31 21:30:55 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:55 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "auto_null"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:55 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "auto_null"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "@DEFAULT_SINK@"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "@DEFAULT_SOURCE@"
Jul 31 21:30:56 archlinux wireplumber[1020]: wp-event-dispatcher: <WpAsyncEventHook:0x5e2e4c8792b0> failed: <WpSiStandardLink:0x5e2e4ceb9a60> link failed: some node was destroyed before the link was created
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "@DEFAULT_SINK@"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "@DEFAULT_SOURCE@"
Jul 31 21:30:56 archlinux pipewire-pulse[1022]: mod.protocol-pulse: client 0x613e0a088980 [WEBRTC VoiceEngine]: ERROR command:-1 (invalid) tag:90569 error:25 (Input/output error)
Jul 31 21:30:56 archlinux discord[15468]: DiscordProcessObserver: Skipping ''
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-output-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-input-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-output-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-input-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-output-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-input-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-output-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-input-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-input-0"
Jul 31 21:30:56 archlinux rtkit-daemon[1031]: Successfully made thread 26193 of process 23245 owned by '1000' RT at priority 20.
Jul 31 21:30:56 archlinux rtkit-daemon[1031]: Supervising 19 threads of 8 processes of 1 users.
Jul 31 21:30:56 archlinux pipewire[1019]: mod.client-node: detected old client version 4
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-output-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-output-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.pro-input-0"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:56 archlinux plasmashell[1197]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: Service ":1.103" unregistered
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "auto_null"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "auto_null.monitor"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_output.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:30:57 archlinux kded6[1186]: org.kde.pulseaudio: No object for name "alsa_input.usb-HP__Inc_HyperX_Virtual_Surround_Sound_00000000-00.analog-stereo"
Jul 31 21:31:00 archlinux steam[15605]: CSteam3Client::ShutdownDmesg:
[ 0.000000] Linux version 6.6.42-1-lts (linux-lts@archlinux) (gcc (GCC) 14.1.1 20240720, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Thu, 25 Jul 2024 08:14:54 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=a3e2f4e2-35a3-43c7-98f6-3bbc5bd2af6a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet nvidia_drm.modeset=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x0000000083f56fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000083f57000-0x0000000083f57fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000083f58000-0x0000000083fbdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000083fbe000-0x0000000083fbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000083fbf000-0x00000000c3c53fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3c54000-0x00000000c3fb6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3fb7000-0x00000000c4124fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c4125000-0x00000000c5c1afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c5c1b000-0x00000000c6bfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6bff000-0x00000000c7ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000caffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042e2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000042e300000-0x000000042fffffff] reserved
[ 0.000000] The simpledrm driver will not be probed
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: ASUS System Product Name/PRIME B550M-A (WI-FI), BIOS 2803 04/27/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3799.977 MHz processor
[ 0.000360] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000362] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000369] last_pfn = 0x42e300 max_arch_pfn = 0x400000000
[ 0.000374] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000376] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000791] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000797] last_pfn = 0xc8000 max_arch_pfn = 0x400000000
[ 0.003459] Using GB pages for direct mapping
[ 0.003767] RAMDISK: [mem 0x36e69000-0x3772bfff]
[ 0.003779] ACPI: Early table checksum verification disabled
[ 0.003782] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.003785] ACPI: XSDT 0x00000000C4123728 0000C4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003789] ACPI: FACP 0x00000000C4114000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003792] ACPI: DSDT 0x00000000C4108000 00B4BC (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.003794] ACPI: FACS 0x00000000C4C00000 000040
[ 0.003795] ACPI: IVRS 0x00000000C4122000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003797] ACPI: SSDT 0x00000000C411A000 0072B0 (v02 AMD Artic 00000002 MSFT 04000000)
[ 0.003798] ACPI: SSDT 0x00000000C4116000 003B86 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.003800] ACPI: SSDT 0x00000000C4115000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003801] ACPI: FIDT 0x00000000C4107000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003803] ACPI: WSMT 0x00000000C4102000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003804] ACPI: MCFG 0x00000000C4105000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003806] ACPI: HPET 0x00000000C4104000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003807] ACPI: WPBT 0x00000000C4023000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.003809] ACPI: TPM2 0x00000000C4022000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003810] ACPI: SSDT 0x00000000C401C000 005354 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003812] ACPI: CRAT 0x00000000C401B000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003813] ACPI: CDIT 0x00000000C401A000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003814] ACPI: SSDT 0x00000000C4019000 000259 (v01 AMD ArticDGP 00000001 INTL 20120913)
[ 0.003816] ACPI: SSDT 0x00000000C4015000 003E42 (v01 AMD ArticN 00000001 INTL 20120913)
[ 0.003817] ACPI: APIC 0x00000000C4013000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.003819] ACPI: SSDT 0x00000000C4012000 00007D (v01 AMD ArticDIS 00000001 INTL 20120913)
[ 0.003820] ACPI: SSDT 0x00000000C4011000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.003822] ACPI: FPDT 0x00000000C4010000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003823] ACPI: Reserving FACP table memory at [mem 0xc4114000-0xc4114113]
[ 0.003824] ACPI: Reserving DSDT table memory at [mem 0xc4108000-0xc41134bb]
[ 0.003824] ACPI: Reserving FACS table memory at [mem 0xc4c00000-0xc4c0003f]
[ 0.003824] ACPI: Reserving IVRS table memory at [mem 0xc4122000-0xc41220cf]
[ 0.003825] ACPI: Reserving SSDT table memory at [mem 0xc411a000-0xc41212af]
[ 0.003825] ACPI: Reserving SSDT table memory at [mem 0xc4116000-0xc4119b85]
[ 0.003825] ACPI: Reserving SSDT table memory at [mem 0xc4115000-0xc4115220]
[ 0.003826] ACPI: Reserving FIDT table memory at [mem 0xc4107000-0xc410709b]
[ 0.003826] ACPI: Reserving WSMT table memory at [mem 0xc4102000-0xc4102027]
[ 0.003827] ACPI: Reserving MCFG table memory at [mem 0xc4105000-0xc410503b]
[ 0.003827] ACPI: Reserving HPET table memory at [mem 0xc4104000-0xc4104037]
[ 0.003827] ACPI: Reserving WPBT table memory at [mem 0xc4023000-0xc402303b]
[ 0.003828] ACPI: Reserving TPM2 table memory at [mem 0xc4022000-0xc402204b]
[ 0.003828] ACPI: Reserving SSDT table memory at [mem 0xc401c000-0xc4021353]
[ 0.003828] ACPI: Reserving CRAT table memory at [mem 0xc401b000-0xc401bee7]
[ 0.003829] ACPI: Reserving CDIT table memory at [mem 0xc401a000-0xc401a028]
[ 0.003829] ACPI: Reserving SSDT table memory at [mem 0xc4019000-0xc4019258]
[ 0.003829] ACPI: Reserving SSDT table memory at [mem 0xc4015000-0xc4018e41]
[ 0.003830] ACPI: Reserving APIC table memory at [mem 0xc4013000-0xc401315d]
[ 0.003830] ACPI: Reserving SSDT table memory at [mem 0xc4012000-0xc401207c]
[ 0.003831] ACPI: Reserving SSDT table memory at [mem 0xc4011000-0xc40110be]
[ 0.003831] ACPI: Reserving FPDT table memory at [mem 0xc4010000-0xc4010043]
[ 0.003880] No NUMA configuration found
[ 0.003881] Faking a node at [mem 0x0000000000000000-0x000000042e2fffff]
[ 0.003883] NODE_DATA(0) allocated [mem 0x42e2fb000-0x42e2fffff]
[ 0.003899] Zone ranges:
[ 0.003899] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003901] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003901] Normal [mem 0x0000000100000000-0x000000042e2fffff]
[ 0.003902] Device empty
[ 0.003903] Movable zone start for each node
[ 0.003903] Early memory node ranges
[ 0.003903] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.003904] node 0: [mem 0x0000000000100000-0x0000000009d1efff]
[ 0.003905] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003905] node 0: [mem 0x000000000a20d000-0x000000000affffff]
[ 0.003905] node 0: [mem 0x000000000b020000-0x0000000083f56fff]
[ 0.003906] node 0: [mem 0x0000000083f58000-0x0000000083fbdfff]
[ 0.003906] node 0: [mem 0x0000000083fbf000-0x00000000c3c53fff]
[ 0.003907] node 0: [mem 0x00000000c6bff000-0x00000000c7ffffff]
[ 0.003907] node 0: [mem 0x0000000100000000-0x000000042e2fffff]
[ 0.003908] Initmem setup node 0 [mem 0x0000000000001000-0x000000042e2fffff]
[ 0.003911] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003920] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.003995] On node 0, zone DMA32: 737 pages in unavailable ranges
[ 0.004002] On node 0, zone DMA32: 13 pages in unavailable ranges
[ 0.005679] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.005680] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.006870] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.006959] On node 0, zone DMA32: 12203 pages in unavailable ranges
[ 0.021739] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.022224] ACPI: PM-Timer IO Port: 0x808
[ 0.022231] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.022242] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[ 0.022248] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[ 0.022249] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.022250] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.022252] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.022253] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.022256] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.022274] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.022275] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.022275] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.022276] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.022276] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.022277] PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
[ 0.022278] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff]
[ 0.022278] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.022279] PM: hibernation: Registered nosave memory: [mem 0x83f57000-0x83f57fff]
[ 0.022280] PM: hibernation: Registered nosave memory: [mem 0x83fbe000-0x83fbefff]
[ 0.022281] PM: hibernation: Registered nosave memory: [mem 0xc3c54000-0xc3fb6fff]
[ 0.022281] PM: hibernation: Registered nosave memory: [mem 0xc3fb7000-0xc4124fff]
[ 0.022282] PM: hibernation: Registered nosave memory: [mem 0xc4125000-0xc5c1afff]
[ 0.022282] PM: hibernation: Registered nosave memory: [mem 0xc5c1b000-0xc6bfefff]
[ 0.022283] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcaffffff]
[ 0.022283] PM: hibernation: Registered nosave memory: [mem 0xcb000000-0xceffffff]
[ 0.022283] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xcfffffff]
[ 0.022284] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.022284] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.022284] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[ 0.022285] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.022285] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
[ 0.022285] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff]
[ 0.022286] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
[ 0.022286] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.022286] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.022286] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.022287] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.022287] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.022287] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.022288] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.022288] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.022288] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.022289] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.022289] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.022289] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.022289] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.022290] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.022290] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.022290] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.022291] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.022291] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.022291] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.022292] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.022293] Booting paravirtualized kernel on bare hardware
[ 0.022295] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.025325] setup_percpu: NR_CPUS:320 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.026074] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.026078] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.026079] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.026085] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.026101] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=a3e2f4e2-35a3-43c7-98f6-3bbc5bd2af6a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet nvidia_drm.modeset=1
[ 0.026149] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
[ 0.026167] random: crng init done
[ 0.026168] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.026168] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.026169] printk: log_buf_len min size: 131072 bytes
[ 0.026279] printk: log_buf_len: 262144 bytes
[ 0.026279] printk: early log buf free: 116440(88%)
[ 0.027311] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.027859] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.027994] Fallback order for Node 0: 0
[ 0.027999] Built 1 zonelists, mobility grouping on. Total pages: 4076163
[ 0.028000] Policy zone: Normal
[ 0.028164] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.028201] software IO TLB: area num 32.
[ 0.056114] Memory: 16146120K/16564100K available (16384K kernel code, 2136K rwdata, 13024K rodata, 3428K init, 3720K bss, 417720K reserved, 0K cma-reserved)
[ 0.056263] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.056283] ftrace: allocating 48906 entries in 192 pages
[ 0.064223] ftrace: allocated 192 pages with 2 groups
[ 0.064757] Dynamic Preempt: voluntary
[ 0.064941] rcu: Preemptible hierarchical RCU implementation.
[ 0.064941] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[ 0.064942] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.064943] Trampoline variant of Tasks RCU enabled.
[ 0.064943] Rude variant of Tasks RCU enabled.
[ 0.064943] Tracing variant of Tasks RCU enabled.
[ 0.064943] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.064944] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.066366] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[ 0.066545] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.066635] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.066663] spurious 8259A interrupt: IRQ7.
[ 0.066676] Console: colour dummy device 80x25
[ 0.066678] printk: console [tty0] enabled
[ 0.066708] ACPI: Core revision 20230628
[ 0.066796] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.066812] APIC: Switch to symmetric I/O mode setup
[ 0.067405] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[ 0.067653] x2apic enabled
[ 0.067694] APIC: Switched APIC routing to: cluster x2apic
[ 0.068299] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083485] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8c84ef16b, max_idle_ns: 881590905516 ns
[ 0.083488] Calibrating delay loop (skipped), value calculated using timer frequency.. 7602.61 BogoMIPS (lpj=12666590)
[ 0.083499] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.083517] LVT offset 1 assigned for vector 0xf9
[ 0.083574] LVT offset 2 assigned for vector 0xf4
[ 0.083589] process: using mwait in idle threads
[ 0.083590] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.083591] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.083593] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.083594] Spectre V2 : Mitigation: Retpolines
[ 0.083594] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.083595] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.083595] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.083596] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.083596] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.083597] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.083598] Speculative Return Stack Overflow: IBPB-extending microcode not applied!
[ 0.083598] Speculative Return Stack Overflow: WARNING: See https://kernel.org/doc/html/latest/admin-guide/hw-vuln/srso.html for mitigation options.
[ 0.083598] Speculative Return Stack Overflow: Vulnerable: Safe RET, no microcode
[ 0.083601] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.083602] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.083602] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.083603] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.083603] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.083604] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.083605] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.083605] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
[ 0.083606] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[ 0.100401] Freeing SMP alternatives memory: 40K
[ 0.100403] pid_max: default: 32768 minimum: 301
[ 0.100446] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.100470] landlock: Up and running.
[ 0.100471] Yama: becoming mindful.
[ 0.100474] LSM support for eBPF active
[ 0.100512] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.100528] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.211898] smpboot: CPU0: AMD Ryzen 7 5700G with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[ 0.212078] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ 0.212092] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ 0.212109] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
[ 0.212125] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.212130] ... version: 0
[ 0.212131] ... bit width: 48
[ 0.212131] ... generic registers: 6
[ 0.212132] ... value mask: 0000ffffffffffff
[ 0.212133] ... max period: 00007fffffffffff
[ 0.212134] ... fixed-purpose events: 0
[ 0.212135] ... event mask: 000000000000003f
[ 0.212218] signal: max sigframe size: 3376
[ 0.212240] rcu: Hierarchical SRCU implementation.
[ 0.212241] rcu: Max phase no-delay instances is 1000.
[ 0.213486] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.213486] smp: Bringing up secondary CPUs ...
[ 0.213486] smpboot: x86: Booting SMP configuration:
[ 0.213486] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.232156] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.246869] smp: Brought up 1 node, 16 CPUs
[ 0.246869] smpboot: Max logical packages: 2
[ 0.246869] smpboot: Total of 16 processors activated (121647.90 BogoMIPS)
[ 0.248487] devtmpfs: initialized
[ 0.248487] x86/mm: Memory block size: 128MB
[ 0.251359] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes)
[ 0.251359] ACPI: PM: Registering ACPI NVS region [mem 0xc4125000-0xc5c1afff] (28270592 bytes)
[ 0.251359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.251359] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.251359] pinctrl core: initialized pinctrl subsystem
[ 0.251359] PM: RTC time: 06:43:59, date: 2024-08-01
[ 0.251359] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.251359] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.251359] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.251359] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.251359] audit: initializing netlink subsys (disabled)
[ 0.251359] audit: type=2000 audit(1722494638.183:1): state=initialized audit_enabled=0 res=1
[ 0.251359] thermal_sys: Registered thermal governor 'fair_share'
[ 0.251359] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.251359] thermal_sys: Registered thermal governor 'step_wise'
[ 0.251359] thermal_sys: Registered thermal governor 'user_space'
[ 0.251359] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.251359] cpuidle: using governor ladder
[ 0.251359] cpuidle: using governor menu
[ 0.251359] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.251359] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.251359] PCI: Using configuration type 1 for base access
[ 0.251359] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.251359] mtrr: probably your BIOS does not setup all CPUs.
[ 0.251359] mtrr: corrected configuration.
[ 0.251359] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.253649] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.253651] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.253653] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.253654] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.255315] ACPI: Added _OSI(Module Device)
[ 0.255315] ACPI: Added _OSI(Processor Device)
[ 0.255315] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.255315] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.281768] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.284516] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.287735] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.290432] ACPI: Interpreter enabled
[ 0.290449] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.290451] ACPI: Using IOAPIC for interrupt routing
[ 0.292196] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.292197] PCI: Using E820 reservations for host bridge windows
[ 0.292722] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.326652] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.326658] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.326844] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
[ 0.327180] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.327192] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.327812] PCI host bridge to bus 0000:00
[ 0.327814] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.327816] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.327818] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.327819] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.327821] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.327823] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec2ffff window]
[ 0.327824] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.327826] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.327842] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[ 0.327959] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[ 0.328074] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[ 0.328138] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
[ 0.328202] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.329064] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[ 0.329130] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
[ 0.329153] pci 0000:00:02.1: enabling Extended Tags
[ 0.329188] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.329345] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
[ 0.329368] pci 0000:00:02.2: enabling Extended Tags
[ 0.329402] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.329515] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[ 0.329579] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[ 0.329601] pci 0000:00:08.1: enabling Extended Tags
[ 0.329634] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.329801] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.329942] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.330103] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000
[ 0.330144] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000
[ 0.330188] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000
[ 0.330229] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000
[ 0.330271] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000
[ 0.330313] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000
[ 0.330353] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000
[ 0.330393] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000
[ 0.330517] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000
[ 0.330531] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.330543] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.330556] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.330564] pci 0000:01:00.0: reg 0x24: [io 0xf000-0xf07f]
[ 0.330573] pci 0000:01:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
[ 0.330598] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.330707] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.330822] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
[ 0.330836] pci 0000:01:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
[ 0.331022] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.331026] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.331029] pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.331033] pci 0000:00:01.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.331108] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330
[ 0.331126] pci 0000:02:00.0: reg 0x10: [mem 0xfc8a0000-0xfc8a7fff 64bit]
[ 0.331165] pci 0000:02:00.0: enabling Extended Tags
[ 0.331219] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.331395] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601
[ 0.331441] pci 0000:02:00.1: reg 0x24: [mem 0xfc880000-0xfc89ffff]
[ 0.331449] pci 0000:02:00.1: reg 0x30: [mem 0xfc800000-0xfc87ffff pref]
[ 0.331456] pci 0000:02:00.1: enabling Extended Tags
[ 0.331498] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.331604] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400
[ 0.331646] pci 0000:02:00.2: enabling Extended Tags
[ 0.331694] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.331817] pci 0000:00:02.1: PCI bridge to [bus 02-0a]
[ 0.331821] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.331824] pci 0000:00:02.1: bridge window [mem 0xfc600000-0xfc8fffff]
[ 0.331977] pci 0000:03:00.0: [1022:43ea] type 01 class 0x060400
[ 0.332023] pci 0000:03:00.0: enabling Extended Tags
[ 0.332080] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.332206] pci 0000:03:01.0: [1022:43ea] type 01 class 0x060400
[ 0.332252] pci 0000:03:01.0: enabling Extended Tags
[ 0.332309] pci 0000:03:01.0: PME# supported from D3hot D3cold
[ 0.332433] pci 0000:03:02.0: [1022:43ea] type 01 class 0x060400
[ 0.332479] pci 0000:03:02.0: enabling Extended Tags
[ 0.332536] pci 0000:03:02.0: PME# supported from D3hot D3cold
[ 0.332661] pci 0000:03:03.0: [1022:43ea] type 01 class 0x060400
[ 0.332708] pci 0000:03:03.0: enabling Extended Tags
[ 0.332764] pci 0000:03:03.0: PME# supported from D3hot D3cold
[ 0.332893] pci 0000:03:04.0: [1022:43ea] type 01 class 0x060400
[ 0.332939] pci 0000:03:04.0: enabling Extended Tags
[ 0.332996] pci 0000:03:04.0: PME# supported from D3hot D3cold
[ 0.333126] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400
[ 0.333172] pci 0000:03:08.0: enabling Extended Tags
[ 0.333229] pci 0000:03:08.0: PME# supported from D3hot D3cold
[ 0.333357] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400
[ 0.333403] pci 0000:03:09.0: enabling Extended Tags
[ 0.333460] pci 0000:03:09.0: PME# supported from D3hot D3cold
[ 0.333601] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.333607] pci 0000:02:00.2: bridge window [io 0xe000-0xefff]
[ 0.333610] pci 0000:02:00.2: bridge window [mem 0xfc600000-0xfc7fffff]
[ 0.333651] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.333699] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.333758] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.333816] pci 0000:03:03.0: PCI bridge to [bus 07]
[ 0.333873] pci 0000:03:04.0: PCI bridge to [bus 08]
[ 0.333965] pci 0000:09:00.0: [8086:2723] type 00 class 0x028000
[ 0.333999] pci 0000:09:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit]
[ 0.334180] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.334397] pci 0000:03:08.0: PCI bridge to [bus 09]
[ 0.334405] pci 0000:03:08.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.334487] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
[ 0.334515] pci 0000:0a:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.334552] pci 0000:0a:00.0: reg 0x18: [mem 0xfc604000-0xfc604fff 64bit]
[ 0.334576] pci 0000:0a:00.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit]
[ 0.334727] pci 0000:0a:00.0: supports D1 D2
[ 0.334729] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.335003] pci 0000:03:09.0: PCI bridge to [bus 0a]
[ 0.335009] pci 0000:03:09.0: bridge window [io 0xe000-0xefff]
[ 0.335012] pci 0000:03:09.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.335105] pci 0000:0b:00.0: [1dee:2263] type 00 class 0x010802
[ 0.335126] pci 0000:0b:00.0: reg 0x10: [mem 0xfc900000-0xfc903fff 64bit]
[ 0.335357] pci 0000:00:02.2: PCI bridge to [bus 0b]
[ 0.335362] pci 0000:00:02.2: bridge window [mem 0xfc900000-0xfc9fffff]
[ 0.335461] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000
[ 0.335497] pci 0000:0c:00.0: enabling Extended Tags
[ 0.335572] pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.335664] pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300
[ 0.335674] pci 0000:0c:00.1: reg 0x10: [mem 0xfc508000-0xfc50bfff]
[ 0.335702] pci 0000:0c:00.1: enabling Extended Tags
[ 0.335734] pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.335829] pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000
[ 0.335846] pci 0000:0c:00.2: reg 0x18: [mem 0xfc400000-0xfc4fffff]
[ 0.335859] pci 0000:0c:00.2: reg 0x24: [mem 0xfc50c000-0xfc50dfff]
[ 0.335868] pci 0000:0c:00.2: enabling Extended Tags
[ 0.335988] pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330
[ 0.335999] pci 0000:0c:00.3: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
[ 0.336023] pci 0000:0c:00.3: enabling Extended Tags
[ 0.336058] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[ 0.336156] pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330
[ 0.336168] pci 0000:0c:00.4: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
[ 0.336192] pci 0000:0c:00.4: enabling Extended Tags
[ 0.336226] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
[ 0.336325] pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300
[ 0.336334] pci 0000:0c:00.6: reg 0x10: [mem 0xfc500000-0xfc507fff]
[ 0.336362] pci 0000:0c:00.6: enabling Extended Tags
[ 0.336394] pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold
[ 0.336508] pci 0000:00:08.1: PCI bridge to [bus 0c]
[ 0.336512] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff]
[ 0.337433] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.337514] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.337586] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.337672] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.337751] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.337816] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.337882] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.337947] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.340169] iommu: Default domain type: Translated
[ 0.340169] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.340368] SCSI subsystem initialized
[ 0.340381] libata version 3.00 loaded.
[ 0.340381] ACPI: bus type USB registered
[ 0.340381] usbcore: registered new interface driver usbfs
[ 0.340381] usbcore: registered new interface driver hub
[ 0.340381] usbcore: registered new device driver usb
[ 0.340381] pps_core: LinuxPPS API ver. 1 registered
[ 0.340381] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.340381] PTP clock support registered
[ 0.340381] EDAC MC: Ver: 3.0.0
[ 0.340394] NetLabel: Initializing
[ 0.340395] NetLabel: domain hash size = 128
[ 0.340396] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.340416] NetLabel: unlabeled traffic allowed by default
[ 0.340422] mctp: management component transport protocol core
[ 0.340423] NET: Registered PF_MCTP protocol family
[ 0.340428] PCI: Using ACPI for IRQ routing
[ 0.344170] PCI: pci_cache_line_size set to 64 bytes
[ 0.344238] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.344240] e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
[ 0.344241] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.344243] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.344244] e820: reserve RAM buffer [mem 0x83f57000-0x83ffffff]
[ 0.344245] e820: reserve RAM buffer [mem 0x83fbe000-0x83ffffff]
[ 0.344246] e820: reserve RAM buffer [mem 0xc3c54000-0xc3ffffff]
[ 0.344247] e820: reserve RAM buffer [mem 0x42e300000-0x42fffffff]
[ 0.344265] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.344265] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.344265] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.344265] vgaarb: loaded
[ 0.344265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.344265] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.346827] clocksource: Switched to clocksource tsc-early
[ 0.347765] VFS: Disk quotas dquot_6.6.0
[ 0.347787] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.347887] pnp: PnP ACPI init
[ 0.348023] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.348121] system 00:01: [mem 0x1000000000000 window] could not be reserved
[ 0.348423] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.348426] system 00:03: [io 0x0200-0x021f] has been reserved
[ 0.348800] pnp 00:04: [dma 0 disabled]
[ 0.349231] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.349233] system 00:05: [io 0x040b] has been reserved
[ 0.349235] system 00:05: [io 0x04d6] has been reserved
[ 0.349238] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.349240] system 00:05: [io 0x0c14] has been reserved
[ 0.349242] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.349243] system 00:05: [io 0x0c52] has been reserved
[ 0.349245] system 00:05: [io 0x0c6c] has been reserved
[ 0.349247] system 00:05: [io 0x0c6f] has been reserved
[ 0.349248] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.349250] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.349252] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.349253] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.349255] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.349257] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.349259] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.349261] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.349263] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.349265] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.349267] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.349270] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.349272] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.350373] pnp: PnP ACPI: found 6 devices
[ 0.356391] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.356472] NET: Registered PF_INET protocol family
[ 0.356640] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.358628] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.358651] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.358719] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.358914] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.359013] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.359119] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.359153] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.359189] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.359268] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.359274] NET: Registered PF_XDP protocol family
[ 0.359287] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.359290] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.359294] pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff]
[ 0.359297] pci 0000:00:01.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.359301] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.359316] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.359326] pci 0000:03:02.0: PCI bridge to [bus 06]
[ 0.359337] pci 0000:03:03.0: PCI bridge to [bus 07]
[ 0.359347] pci 0000:03:04.0: PCI bridge to [bus 08]
[ 0.359357] pci 0000:03:08.0: PCI bridge to [bus 09]
[ 0.359361] pci 0000:03:08.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.359369] pci 0000:03:09.0: PCI bridge to [bus 0a]
[ 0.359371] pci 0000:03:09.0: bridge window [io 0xe000-0xefff]
[ 0.359375] pci 0000:03:09.0: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.359383] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.359385] pci 0000:02:00.2: bridge window [io 0xe000-0xefff]
[ 0.359389] pci 0000:02:00.2: bridge window [mem 0xfc600000-0xfc7fffff]
[ 0.359396] pci 0000:00:02.1: PCI bridge to [bus 02-0a]
[ 0.359398] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.359401] pci 0000:00:02.1: bridge window [mem 0xfc600000-0xfc8fffff]
[ 0.359405] pci 0000:00:02.2: PCI bridge to [bus 0b]
[ 0.359408] pci 0000:00:02.2: bridge window [mem 0xfc900000-0xfc9fffff]
[ 0.359413] pci 0000:00:08.1: PCI bridge to [bus 0c]
[ 0.359416] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff]
[ 0.359421] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.359422] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.359424] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.359425] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.359427] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.359429] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec2ffff window]
[ 0.359430] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.359432] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
[ 0.359433] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc0fffff]
[ 0.359435] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.359437] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.359438] pci_bus 0000:02: resource 1 [mem 0xfc600000-0xfc8fffff]
[ 0.359440] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.359441] pci_bus 0000:03: resource 1 [mem 0xfc600000-0xfc7fffff]
[ 0.359443] pci_bus 0000:09: resource 1 [mem 0xfc700000-0xfc7fffff]
[ 0.359444] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
[ 0.359446] pci_bus 0000:0a: resource 1 [mem 0xfc600000-0xfc6fffff]
[ 0.359447] pci_bus 0000:0b: resource 1 [mem 0xfc900000-0xfc9fffff]
[ 0.359449] pci_bus 0000:0c: resource 1 [mem 0xfc200000-0xfc5fffff]
[ 0.359572] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.359597] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.359758] pci 0000:0c:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.359886] pci 0000:0c:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.359971] PCI: CLS 64 bytes, default 64
[ 0.359988] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.360029] Trying to unpack rootfs image as initramfs...
[ 0.360035] pci 0000:00:01.0: Adding to iommu group 0
[ 0.360051] pci 0000:00:01.1: Adding to iommu group 1
[ 0.360075] pci 0000:00:02.0: Adding to iommu group 2
[ 0.360091] pci 0000:00:02.1: Adding to iommu group 3
[ 0.360106] pci 0000:00:02.2: Adding to iommu group 4
[ 0.360129] pci 0000:00:08.0: Adding to iommu group 5
[ 0.360144] pci 0000:00:08.1: Adding to iommu group 6
[ 0.360176] pci 0000:00:14.0: Adding to iommu group 7
[ 0.360190] pci 0000:00:14.3: Adding to iommu group 7
[ 0.360263] pci 0000:00:18.0: Adding to iommu group 8
[ 0.360277] pci 0000:00:18.1: Adding to iommu group 8
[ 0.360292] pci 0000:00:18.2: Adding to iommu group 8
[ 0.360307] pci 0000:00:18.3: Adding to iommu group 8
[ 0.360321] pci 0000:00:18.4: Adding to iommu group 8
[ 0.360336] pci 0000:00:18.5: Adding to iommu group 8
[ 0.360351] pci 0000:00:18.6: Adding to iommu group 8
[ 0.360366] pci 0000:00:18.7: Adding to iommu group 8
[ 0.360395] pci 0000:01:00.0: Adding to iommu group 9
[ 0.360412] pci 0000:01:00.1: Adding to iommu group 9
[ 0.360448] pci 0000:02:00.0: Adding to iommu group 10
[ 0.360465] pci 0000:02:00.1: Adding to iommu group 10
[ 0.360482] pci 0000:02:00.2: Adding to iommu group 10
[ 0.360487] pci 0000:03:00.0: Adding to iommu group 10
[ 0.360492] pci 0000:03:01.0: Adding to iommu group 10
[ 0.360497] pci 0000:03:02.0: Adding to iommu group 10
[ 0.360502] pci 0000:03:03.0: Adding to iommu group 10
[ 0.360508] pci 0000:03:04.0: Adding to iommu group 10
[ 0.360513] pci 0000:03:08.0: Adding to iommu group 10
[ 0.360518] pci 0000:03:09.0: Adding to iommu group 10
[ 0.360525] pci 0000:09:00.0: Adding to iommu group 10
[ 0.360530] pci 0000:0a:00.0: Adding to iommu group 10
[ 0.360547] pci 0000:0b:00.0: Adding to iommu group 11
[ 0.360584] pci 0000:0c:00.0: Adding to iommu group 12
[ 0.360600] pci 0000:0c:00.1: Adding to iommu group 13
[ 0.360617] pci 0000:0c:00.2: Adding to iommu group 14
[ 0.360633] pci 0000:0c:00.3: Adding to iommu group 15
[ 0.360651] pci 0000:0c:00.4: Adding to iommu group 16
[ 0.360667] pci 0000:0c:00.6: Adding to iommu group 17
[ 0.363599] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.363602] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.363610] AMD-Vi: Interrupt remapping enabled
[ 0.363611] AMD-Vi: X2APIC enabled
[ 0.390696] Freeing initrd memory: 8972K
[ 0.599303] AMD-Vi: Virtual APIC enabled
[ 0.599313] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.599315] software IO TLB: mapped [mem 0x00000000bfc54000-0x00000000c3c54000] (64MB)
[ 0.599413] LVT offset 0 assigned for vector 0x400
[ 0.599525] perf: AMD IBS detected (0x000003ff)
[ 0.599534] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.601506] Initialise system trusted keyrings
[ 0.601516] Key type blacklist registered
[ 0.601546] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.601560] zbud: loaded
[ 0.601737] integrity: Platform Keyring initialized
[ 0.601740] integrity: Machine keyring initialized
[ 0.609035] Key type asymmetric registered
[ 0.609037] Asymmetric key parser 'x509' registered
[ 0.609050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.609087] io scheduler mq-deadline registered
[ 0.609089] io scheduler kyber registered
[ 0.609097] io scheduler bfq registered
[ 0.611593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.611728] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.611750] ACPI: button: Power Button [PWRB]
[ 0.611784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.611831] ACPI: button: Power Button [PWRF]
[ 0.611895] Estimated ratio of average max frequency by base frequency (times 1024): 1141
[ 0.611909] Monitor-Mwait will be used to enter C-1 state
[ 0.611913] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 0.612058] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 0.612192] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 0.612323] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[ 0.612454] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[ 0.612586] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[ 0.612727] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[ 0.612856] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[ 0.612958] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 0.613069] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 0.613203] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 0.613334] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[ 0.613480] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[ 0.613606] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[ 0.613758] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[ 0.613909] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[ 0.614235] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.614436] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.617620] Non-volatile memory driver v1.3
[ 0.617623] Linux agpgart interface v0.103
[ 0.676278] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.676732] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.676794] ACPI: bus type drm_connector registered
[ 0.679381] ahci 0000:02:00.1: version 3.0
[ 0.679517] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.679564] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.679567] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.680087] scsi host0: ahci
[ 0.680268] scsi host1: ahci
[ 0.680417] scsi host2: ahci
[ 0.680596] scsi host3: ahci
[ 0.680727] scsi host4: ahci
[ 0.680844] scsi host5: ahci
[ 0.680895] ata1: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880100 irq 43
[ 0.680897] ata2: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880180 irq 43
[ 0.680900] ata3: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880200 irq 43
[ 0.680902] ata4: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880280 irq 43
[ 0.680904] ata5: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880300 irq 43
[ 0.680906] ata6: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880380 irq 43
[ 0.681006] usbcore: registered new interface driver usbserial_generic
[ 0.681012] usbserial: USB Serial support registered for generic
[ 0.681083] rtc_cmos 00:02: RTC can wake from S4
[ 0.681318] rtc_cmos 00:02: registered as rtc0
[ 0.681347] rtc_cmos 00:02: setting system clock to 2024-08-01T06:43:59 UTC (1722494639)
[ 0.681375] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.682551] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.682815] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.682817] vesafb: scrolling: redraw
[ 0.682818] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.682826] vesafb: framebuffer at 0xe1000000, mapped to 0x00000000f7082e27, using 1216k, total 1216k
[ 0.682857] fbcon: Deferring console take-over
[ 0.682858] fb0: VESA VGA frame buffer device
[ 0.682872] hid: raw HID events driver (C) Jiri Kosina
[ 0.682960] drop_monitor: Initializing network drop monitor service
[ 0.692824] Initializing XFRM netlink socket
[ 0.692856] NET: Registered PF_INET6 protocol family
[ 0.697756] Segment Routing with IPv6
[ 0.697758] RPL Segment Routing with IPv6
[ 0.697766] In-situ OAM (IOAM) with IPv6
[ 0.697788] NET: Registered PF_PACKET protocol family
[ 0.699061] microcode: CPU0: patch_level=0x0a50000d
[ 0.699063] microcode: CPU2: patch_level=0x0a50000d
[ 0.699063] microcode: CPU1: patch_level=0x0a50000d
[ 0.699064] microcode: CPU3: patch_level=0x0a50000d
[ 0.699065] microcode: CPU5: patch_level=0x0a50000d
[ 0.699066] microcode: CPU6: patch_level=0x0a50000d
[ 0.699065] microcode: CPU4: patch_level=0x0a50000d
[ 0.699067] microcode: CPU7: patch_level=0x0a50000d
[ 0.699067] microcode: CPU8: patch_level=0x0a50000d
[ 0.699068] microcode: CPU10: patch_level=0x0a50000d
[ 0.699070] microcode: CPU11: patch_level=0x0a50000d
[ 0.699071] microcode: CPU9: patch_level=0x0a50000d
[ 0.699071] microcode: CPU12: patch_level=0x0a50000d
[ 0.699071] microcode: CPU13: patch_level=0x0a50000d
[ 0.699073] microcode: CPU14: patch_level=0x0a50000d
[ 0.699073] microcode: CPU15: patch_level=0x0a50000d
[ 0.699088] microcode: Microcode Update Driver: v2.2.
[ 0.699202] resctrl: L3 allocation detected
[ 0.699204] resctrl: MB allocation detected
[ 0.699205] resctrl: L3 monitoring detected
[ 0.699207] IPI shorthand broadcast: enabled
[ 0.701427] sched_clock: Marking stable (699037155, 247637)->(838572755, -139287963)
[ 0.701551] registered taskstats version 1
[ 0.702021] Loading compiled-in X.509 certificates
[ 0.704147] Loaded X.509 cert 'Build time autogenerated kernel key: 466c0ebd00e3f8cc0a2ae7336386e61b74266bd2'
[ 0.706260] Key type .fscrypt registered
[ 0.706262] Key type fscrypt-provisioning registered
[ 0.706558] PM: Magic number: 4:405:720
[ 0.710636] RAS: Correctable Errors collector initialized.
[ 0.710711] clk: Disabling unused clocks
[ 1.157225] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.157392] ata1.00: ATA-10: KINGSTON SA400S37480G, SBFKP1.5, max UDMA/133
[ 1.157428] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.157600] ata1.00: configured for UDMA/133
[ 1.157782] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 P1.5 PQ: 0 ANSI: 5
[ 1.158271] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.158280] sd 0:0:0:0: [sda] Write Protect is off
[ 1.158282] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.158296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.158313] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.159012] sda: sda1 sda2
[ 1.159099] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.610543] tsc: Refined TSC clocksource calibration: 3804.004 MHz
[ 1.610556] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6daa3d34f9b, max_idle_ns: 881590849393 ns
[ 1.610592] clocksource: Switched to clocksource tsc
[ 1.627205] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.655914] ata2.00: ATA-10: ST2000DM008-2UB102, 0001, max UDMA/133
[ 1.665186] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.725706] ata2.00: configured for UDMA/133
[ 1.725902] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2UB1 0001 PQ: 0 ANSI: 5
[ 1.726243] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.726247] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.726257] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.726260] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.726275] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.726300] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.777423] sdb: sdb1 sdb2
[ 1.777608] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.040562] ata3: SATA link down (SStatus 0 SControl 330)
[ 2.353871] ata4: SATA link down (SStatus 0 SControl 330)
[ 2.596940] clocksource: timekeeping watchdog on CPU4: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 2.596945] clocksource: 'hpet' wd_nsec: 507211181 wd_now: 24733bf wd_last: 1d8633a mask: ffffffff
[ 2.596948] clocksource: 'tsc' cs_nsec: 506677131 cs_now: 1806b115de cs_last: 1793cf4508 mask: ffffffffffffffff
[ 2.596951] clocksource: Clocksource 'tsc' skewed -534050 ns (0 ms) over watchdog 'hpet' interval of 507211181 ns (507 ms)
[ 2.596953] clocksource: 'tsc' is current clocksource.
[ 2.596960] tsc: Marking TSC unstable due to clocksource watchdog
[ 2.596976] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 2.596977] sched_clock: Marking unstable (2596727973, 247479)<-(2736263275, -139287963)
[ 2.597145] clocksource: Checking clocksource tsc synchronization from CPU 9 to CPUs 0,2-3,10-11.
[ 2.597209] clocksource: Switched to clocksource hpet
[ 2.667286] ata5: SATA link down (SStatus 0 SControl 330)
[ 3.700566] ata6: failed to resume link (SControl 0)
[ 3.700580] ata6: SATA link down (SStatus 0 SControl 0)
[ 3.702048] Freeing unused decrypted memory: 2028K
[ 3.702362] Freeing unused kernel image (initmem) memory: 3428K
[ 3.702364] Write protecting the kernel read-only data: 30720k
[ 3.702715] Freeing unused kernel image (rodata/data gap) memory: 1312K
[ 3.742019] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.742023] rodata_test: all tests were successful
[ 3.742046] Run /init as init process
[ 3.742047] with arguments:
[ 3.742048] /init
[ 3.742049] with environment:
[ 3.742050] HOME=/
[ 3.742051] TERM=linux
[ 3.742052] BOOT_IMAGE=/boot/vmlinuz-linux-lts
[ 3.870216] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.870231] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 3.880818] nvme nvme0: pci function 0000:0b:00.0
[ 3.885509] nvme nvme0: missing or invalid SUBNQN field.
[ 3.896219] nvme nvme0: allocated 64 MiB host memory buffer.
[ 3.909721] nvme nvme0: 8/0/0 default/read/poll queues
[ 3.916243] nvme0n1: p1 p2 p3 p4
[ 3.925574] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[ 3.925958] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.925962] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 3.925966] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.926022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 3.926024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.926025] usb usb1: Product: xHCI Host Controller
[ 3.926027] usb usb1: Manufacturer: Linux 6.6.42-1-lts xhci-hcd
[ 3.926028] usb usb1: SerialNumber: 0000:02:00.0
[ 3.926174] hub 1-0:1.0: USB hub found
[ 3.926188] hub 1-0:1.0: 10 ports detected
[ 3.941884] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.941905] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 3.941906] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.941908] usb usb2: Product: xHCI Host Controller
[ 3.941909] usb usb2: Manufacturer: Linux 6.6.42-1-lts xhci-hcd
[ 3.941910] usb usb2: SerialNumber: 0000:02:00.0
[ 3.942054] hub 2-0:1.0: USB hub found
[ 3.942064] hub 2-0:1.0: 4 ports detected
[ 3.948713] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 3.948717] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[ 3.948820] xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[ 3.949169] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 3.949172] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[ 3.949174] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.949203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 3.949205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.949207] usb usb3: Product: xHCI Host Controller
[ 3.949208] usb usb3: Manufacturer: Linux 6.6.42-1-lts xhci-hcd
[ 3.949209] usb usb3: SerialNumber: 0000:0c:00.3
[ 3.949340] hub 3-0:1.0: USB hub found
[ 3.949347] hub 3-0:1.0: 4 ports detected
[ 3.949520] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.949540] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 3.949541] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.949543] usb usb4: Product: xHCI Host Controller
[ 3.949544] usb usb4: Manufacturer: Linux 6.6.42-1-lts xhci-hcd
[ 3.949545] usb usb4: SerialNumber: 0000:0c:00.3
[ 3.949659] hub 4-0:1.0: USB hub found
[ 3.949665] hub 4-0:1.0: 2 ports detected
[ 3.949839] xhci_hcd 0000:0c:00.4: xHCI Host Controller
[ 3.949843] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5
[ 3.949931] xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[ 3.950289] xhci_hcd 0000:0c:00.4: xHCI Host Controller
[ 3.950296] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6
[ 3.950299] xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.950328] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 3.950330] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.950332] usb usb5: Product: xHCI Host Controller
[ 3.950333] usb usb5: Manufacturer: Linux 6.6.42-1-lts xhci-hcd
[ 3.950334] usb usb5: SerialNumber: 0000:0c:00.4
[ 3.950450] hub 5-0:1.0: USB hub found
[ 3.950457] hub 5-0:1.0: 4 ports detected
[ 3.950632] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.950651] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 3.950652] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.950654] usb usb6: Product: xHCI Host Controller
[ 3.950655] usb usb6: Manufacturer: Linux 6.6.42-1-lts xhci-hcd
[ 3.950656] usb usb6: SerialNumber: 0000:0c:00.4
[ 3.950763] hub 6-0:1.0: USB hub found
[ 3.950768] hub 6-0:1.0: 2 ports detected
[ 4.190288] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 4.200300] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 4.200311] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 4.264406] fbcon: Taking over console
[ 4.264516] Console: switching to colour frame buffer device 80x30
[ 4.363573] usb 3-2: New USB device found, idVendor=1532, idProduct=025e, bcdDevice= 2.00
[ 4.363578] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.363580] usb 3-2: Product: Razer Cynosa V2
[ 4.363589] usb 3-2: Manufacturer: Razer
[ 4.366892] EXT4-fs (sda2): mounted filesystem a3e2f4e2-35a3-43c7-98f6-3bbc5bd2af6a r/w with ordered data mode. Quota mode: none.
[ 4.373333] usb 5-2: New USB device found, idVendor=0458, idProduct=7097, bcdDevice= 0.06
[ 4.373337] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.373339] usb 5-2: Product: FaceCam 2020
[ 4.373341] usb 5-2: Manufacturer: KYE SYSTEMS CORP.
[ 4.436578] usb 1-1: New USB device found, idVendor=2dc8, idProduct=3109, bcdDevice= 2.00
[ 4.436583] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.436585] usb 1-1: Product: Ultimate Wireless Controller
[ 4.436587] usb 1-1: Manufacturer: 8BitDo
[ 4.436589] usb 1-1: SerialNumber: 1db4f1d817e4
[ 4.492084] systemd[1]: systemd 256.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 4.492091] systemd[1]: Detected architecture x86-64.
[ 4.536160] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 4.570602] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 4.962579] usb 1-2: New USB device found, idVendor=1532, idProduct=00a6, bcdDevice= 1.00
[ 4.962586] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.962588] usb 1-2: Product: Razer Viper V2 Pro
[ 4.962591] usb 1-2: Manufacturer: Razer
[ 4.962592] usb 1-2: SerialNumber: 000000000000
[ 5.020606] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 5.064481] zram: Added device: zram0
[ 5.149313] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.183617] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 5.188598] systemd[1]: Created slice Slice /system/dirmngr.
[ 5.188897] systemd[1]: Created slice Slice /system/getty.
[ 5.189157] systemd[1]: Created slice Slice /system/gpg-agent.
[ 5.189426] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 5.189687] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 5.189954] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 5.190207] systemd[1]: Created slice Slice /system/keyboxd.
[ 5.190501] systemd[1]: Created slice Slice /system/modprobe.
[ 5.190775] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[ 5.190983] systemd[1]: Created slice User and Session Slice.
[ 5.191038] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.191084] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.191211] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.191230] systemd[1]: Expecting device /dev/disk/by-uuid/9840-9561...
[ 5.191243] systemd[1]: Expecting device /dev/sdb2...
[ 5.191254] systemd[1]: Expecting device /dev/zram0...
[ 5.191269] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.191287] systemd[1]: Reached target Login Prompts.
[ 5.191303] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 5.191323] systemd[1]: Reached target Path Units.
[ 5.191341] systemd[1]: Reached target Remote File Systems.
[ 5.191357] systemd[1]: Reached target Slice Units.
[ 5.191381] systemd[1]: Reached target Local Verity Protected Volumes.
[ 5.191442] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.194408] systemd[1]: Listening on Process Core Dump Socket.
[ 5.194937] systemd[1]: Listening on Credential Encryption/Decryption.
[ 5.195019] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.195086] systemd[1]: Listening on Journal Sockets.
[ 5.195105] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.195118] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.195179] systemd[1]: Listening on udev Control Socket.
[ 5.195227] systemd[1]: Listening on udev Kernel Socket.
[ 5.195285] systemd[1]: Listening on User Database Manager Socket.
[ 5.196704] systemd[1]: Mounting Huge Pages File System...
[ 5.197369] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.197893] systemd[1]: Mounting Kernel Debug File System...
[ 5.198402] systemd[1]: Mounting Kernel Trace File System...
[ 5.199062] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.199670] systemd[1]: Starting Load Kernel Module configfs...
[ 5.200260] systemd[1]: Starting Load Kernel Module dm_mod...
[ 5.200896] systemd[1]: Starting Load Kernel Module drm...
[ 5.201698] systemd[1]: Starting Load Kernel Module fuse...
[ 5.202460] systemd[1]: Starting Load Kernel Module loop...
[ 5.202998] systemd[1]: Starting Mullvad early boot network blocker...
[ 5.203037] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 5.203060] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 5.204262] systemd[1]: Starting Journal Service...
[ 5.205850] systemd[1]: Starting Load Kernel Modules...
[ 5.205864] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.206407] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.206447] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.206975] systemd[1]: Starting Load udev Rules from Credentials...
[ 5.207489] systemd[1]: Starting Coldplug All udev Devices...
[ 5.208879] systemd[1]: Mounted Huge Pages File System.
[ 5.208976] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.209057] systemd[1]: Mounted Kernel Debug File System.
[ 5.209135] systemd[1]: Mounted Kernel Trace File System.
[ 5.210167] loop: module loaded
[ 5.216150] device-mapper: uevent: version 1.0.3
[ 5.216240] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 5.218008] fuse: init (API version 7.39)
[ 5.222894] systemd-journald[376]: Collecting audit messages is disabled.
[ 5.226646] i2c_dev: i2c /dev entries driver
[ 5.247289] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.248433] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.263912] EXT4-fs (sda2): re-mounted a3e2f4e2-35a3-43c7-98f6-3bbc5bd2af6a r/w. Quota mode: none.
[ 5.300608] systemd[1]: Finished Load Kernel Module configfs.
[ 5.301279] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 5.323843] systemd[1]: Finished Load Kernel Module dm_mod.
[ 5.324143] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.350694] systemd[1]: Finished Load Kernel Module drm.
[ 5.351077] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.383939] systemd[1]: Finished Load Kernel Module fuse.
[ 5.384285] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 5.420798] nvidia: loading out-of-tree module taints kernel.
[ 5.420805] nvidia: module license 'NVIDIA' taints kernel.
[ 5.420806] Disabling lock debugging due to kernel taint
[ 5.420808] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 5.420809] nvidia: module license taints kernel.
[ 5.430595] systemd[1]: Finished Load Kernel Module loop.
[ 5.457183] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.504211] systemd[1]: Finished Load udev Rules from Credentials.
[ 5.554196] systemd[1]: Finished Coldplug All udev Devices.
[ 5.555261] systemd[1]: Mounting FUSE Control File System...
[ 5.555795] systemd[1]: Mounting Kernel Configuration File System...
[ 5.556192] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 5.556792] systemd[1]: Starting Load/Save OS Random Seed...
[ 5.556988] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.557520] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 5.557534] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.560577] usb 1-5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[ 5.560581] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.585980] systemd[1]: Mounted FUSE Control File System.
[ 5.586082] systemd[1]: Mounted Kernel Configuration File System.
[ 5.627460] systemd[1]: Finished Load/Save OS Random Seed.
[ 5.629253] systemd[1]: Starting User Database Manager...
[ 5.648221] systemd[1]: Started User Database Manager.
[ 5.697479] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 5.697632] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 5.698346] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.773615] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[ 5.775566] nvidia-nvlink: Nvlink Core is being initialized, major device number 235
[ 5.776987] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.827139] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.827282] systemd[1]: Reached target Preparation for Local File Systems.
[ 5.828359] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 5.894219] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 555.58.02 Tue Jun 25 01:39:15 UTC 2024
[ 5.909875] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 5.946047] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 5.953899] systemd[1]: Found device /dev/zram0.
[ 5.954632] systemd[1]: Starting Create swap on /dev/zram0...
[ 5.964925] systemd[1]: Reached target Trusted Platform Module.
[ 6.004823] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.004875] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.004878] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 6.005116] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.007000] ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[ 6.010279] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 6.010665] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 6.010750] nvidia-uvm: Loaded the UVM driver, major device number 511.
[ 6.010766] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 6.013633] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 6.013635] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.017147] ccp 0000:0c:00.2: tee enabled
[ 6.017235] ccp 0000:0c:00.2: psp enabled
[ 6.018798] Asymmetric key parser 'pkcs8' registered
[ 6.020819] cryptd: max_cpu_qlen set to 1000
[ 6.033237] systemd[1]: Found device KINGSTON_SA400S37480G 1.
[ 6.042199] AVX2 version of gcm_enc/dec engaged.
[ 6.042204] vboxdrv: Found 16 processor cores/threads
[ 6.042276] AES CTR mode by8 optimization enabled
[ 6.045069] systemd[1]: Found device ST2000DM008-2UB102 Basic\x20data\x20partition.
[ 6.049595] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 6.051825] systemd[1]: Starting Virtual Console Setup...
[ 6.055862] zram0: detected capacity change from 0 to 8388608
[ 6.059192] r8169 0000:0a:00.0 eth0: RTL8168h/8111h, 24:4b:fe:8b:d0:fd, XID 541, IRQ 81
[ 6.059198] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 6.069685] mc: Linux media interface: v0.10
[ 6.070033] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 555.58.02 Tue Jun 25 01:10:21 UTC 2024
[ 6.070115] vboxdrv: TSC mode is Invariant, tentative frequency 3800239555 Hz
[ 6.070117] vboxdrv: Successfully loaded version 7.0.20 r163906 (interface 0x00330004)
[ 6.070936] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.071111] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.071210] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.073215] VBoxNetAdp: Successfully started.
[ 6.073428] input: Razer Razer Cynosa V2 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb3/3-2/3-2:1.0/0003:1532:025E.0001/input/input3
[ 6.074371] r8169 0000:0a:00.0 enp10s0: renamed from eth0
[ 6.074611] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 6.076473] VBoxNetFlt: Successfully started.
[ 6.077030] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.077034] cfg80211: failed to load regulatory.db
[ 6.078112] i8042: PNP: No PS/2 controller found.
[ 6.113843] systemd[1]: Finished Create swap on /dev/zram0.
[ 6.125579] videodev: Linux video capture interface: v2.00
[ 6.130417] hid-generic 0003:1532:025E.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer Cynosa V2] on usb-0000:0c:00.3-2/input0
[ 6.134459] input: Razer Razer Cynosa V2 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb3/3-2/3-2:1.1/0003:1532:025E.0002/input/input4
[ 6.147247] systemd[1]: Finished Load Kernel Modules.
[ 6.147556] systemd[1]: mullvad-early-boot-blocking.service: Deactivated successfully.
[ 6.183278] usb 1-6: config 1 has an invalid interface number: 2 but max is 1
[ 6.183281] usb 1-6: config 1 has no interface number 1
[ 6.187196] systemd[1]: Finished Mullvad early boot network blocker.
[ 6.190355] input: Razer Razer Cynosa V2 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb3/3-2/3-2:1.1/0003:1532:025E.0002/input/input5
[ 6.190426] hid-generic 0003:1532:025E.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Cynosa V2] on usb-0000:0c:00.3-2/input1
[ 6.194347] input: Razer Razer Cynosa V2 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb3/3-2/3-2:1.2/0003:1532:025E.0003/input/input6
[ 6.194417] hid-generic 0003:1532:025E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Cynosa V2] on usb-0000:0c:00.3-2/input2
[ 6.195240] usb 1-6: New USB device found, idVendor=0b05, idProduct=1939, bcdDevice= 1.00
[ 6.195243] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.195245] usb 1-6: Product: AURA LED Controller
[ 6.195246] usb 1-6: Manufacturer: AsusTek Computer Inc.
[ 6.195248] usb 1-6: SerialNumber: 9876543210
[ 6.197482] Intel(R) Wireless WiFi driver for Linux
[ 6.201374] iwlwifi 0000:09:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
[ 6.201382] iwlwifi 0000:09:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100
[ 6.201428] hid-generic 0003:2DC8:3109.0004: hiddev96,hidraw3: USB HID v1.11 Device [8BitDo Ultimate Wireless Controller] on usb-0000:02:00.0-1/input0
[ 6.201806] asus_wmi: ASUS WMI generic driver loaded
[ 6.207230] asus_wmi: Initialization: 0x0
[ 6.207270] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.207276] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.207372] iwlwifi 0000:09:00.0: api flags index 2 larger than supported by driver
[ 6.207383] iwlwifi 0000:09:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 6.207426] asus_wmi: BIOS WMI version: 0.9
[ 6.207749] iwlwifi 0000:09:00.0: loaded firmware version 77.c360c4b1.0 cc-a0-77.ucode op_mode iwlmvm
[ 6.208501] asus_wmi: SFUN value: 0x0
[ 6.208502] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 6.210374] input: Razer Razer Viper V2 Pro as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-2/1-2:1.0/0003:1532:00A6.0005/input/input7
[ 6.210460] hid-generic 0003:1532:00A6.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Viper V2 Pro] on usb-0000:02:00.0-2/input0
[ 6.211102] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 6.217217] systemd[1]: Finished Virtual Console Setup.
[ 6.217630] usb 5-2: Found UVC 1.00 device FaceCam 2020 (0458:7097)
[ 6.218380] hid-generic 0003:0B05:1939.0006: hiddev97,hidraw5: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:02:00.0-6/input2
[ 6.219463] systemd[1]: Activating swap Compressed Swap on /dev/zram0...
[ 6.219678] systemd[1]: boot.mount: Directory /boot to mount over is not empty, mounting anyway.
[ 6.220197] systemd[1]: Mounting /boot...
[ 6.220930] systemd[1]: Mounting /media/mount/sdb2...
[ 6.220957] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[ 6.221642] systemd[1]: Starting Apply Kernel Variables...
[ 6.222553] input: Razer Razer Viper V2 Pro Keyboard as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-2/1-2:1.1/0003:1532:00A6.0007/input/input15
[ 6.227875] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input18
[ 6.228017] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card1/input9
[ 6.228254] usbcore: registered new interface driver uvcvideo
[ 6.277158] input: Razer Razer Viper V2 Pro Mouse as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-2/1-2:1.1/0003:1532:00A6.0007/input/input16
[ 6.277217] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input19
[ 6.277260] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card1/input10
[ 6.277318] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card1/input11
[ 6.277398] input: Razer Razer Viper V2 Pro as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-2/1-2:1.1/0003:1532:00A6.0007/input/input17
[ 6.277511] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input20
[ 6.277607] hid-generic 0003:1532:00A6.0007: input,hidraw6: USB HID v1.11 Keyboard [Razer Razer Viper V2 Pro] on usb-0000:02:00.0-2/input1
[ 6.277670] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card1/input12
[ 6.277761] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input21
[ 6.277886] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card1/input13
[ 6.278203] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card1/input14
[ 6.282498] systemd[1]: Reached target Sound Card.
[ 6.284450] input: Razer Razer Viper V2 Pro as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-2/1-2:1.2/0003:1532:00A6.0008/input/input22
[ 6.295790] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.295793] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.295794] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.295796] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 6.295796] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x11/0x0
[ 6.295797] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 6.295798] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 6.295800] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 6.295801] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 6.340858] hid-generic 0003:1532:00A6.0008: input,hidraw7: USB HID v1.11 Keyboard [Razer Razer Viper V2 Pro] on usb-0000:02:00.0-2/input2
[ 6.347276] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[ 6.347419] kvm_amd: TSC scaling supported
[ 6.347420] kvm_amd: Nested Virtualization enabled
[ 6.347421] kvm_amd: Nested Paging enabled
[ 6.347422] kvm_amd: LBR virtualization supported
[ 6.347428] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 6.347428] kvm_amd: Virtual GIF supported
[ 6.348063] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card2/input23
[ 6.348124] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card2/input24
[ 6.348182] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card2/input25
[ 6.348238] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card2/input26
[ 6.348285] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card2/input27
[ 6.352473] hid-generic 0003:1532:00A6.0009: hiddev98,hidraw8: USB HID v1.11 Device [Razer Razer Viper V2 Pro] on usb-0000:02:00.0-2/input4
[ 6.356477] iwlwifi 0000:09:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[ 6.356546] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 6.363215] MCE: In-kernel MCE decoding enabled.
[ 6.365417] input: Razer Razer Viper V2 Pro Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-2/1-2:1.3/0003:1532:00A6.000A/input/input28
[ 6.420815] hid-generic 0003:1532:00A6.000A: input,hiddev99,hidraw9: USB HID v1.11 Device [Razer Razer Viper V2 Pro] on usb-0000:02:00.0-2/input3
[ 6.420857] usbcore: registered new interface driver usbhid
[ 6.420859] usbhid: USB HID core driver
[ 6.426228] mousedev: PS/2 mouse device common for all mice
[ 6.479783] iwlwifi 0000:09:00.0: Detected RF HR B3, rfid=0x10a100
[ 6.479850] intel_rapl_common: Found RAPL domain package
[ 6.479852] intel_rapl_common: Found RAPL domain core
[ 6.544432] iwlwifi 0000:09:00.0: base HW address: 14:f6:d8:7f:27:4f
[ 6.559510] systemd[1]: Starting Load/Save RF Kill Switch Status...
[ 6.782142] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.782565] Adding 4194300k swap on /dev/zram0. Priority:100 extents:1 across:4194300k SSDsc
[ 6.810826] systemd[1]: Finished Apply Kernel Variables.
[ 6.811985] systemd[1]: Activated swap Compressed Swap on /dev/zram0.
[ 6.812069] systemd[1]: Started Load/Save RF Kill Switch Status.
[ 6.812165] systemd[1]: Mounted /boot.
[ 6.812273] systemd[1]: Reached target Swaps.
[ 6.813534] systemd[1]: Mounting Temporary Directory /tmp...
[ 6.818199] systemd[1]: Mounted Temporary Directory /tmp.
[ 6.937561] usb 1-8: New USB device found, idVendor=03f0, idProduct=0b92, bcdDevice=41.02
[ 6.937565] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.937567] usb 1-8: Product: HyperX Virtual Surround Sound
[ 6.937570] usb 1-8: Manufacturer: HP, Inc
[ 6.937571] usb 1-8: SerialNumber: 00000000
[ 7.012536] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 7.062868] input: HP, Inc HyperX Virtual Surround Sound Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-8/1-8:1.3/0003:03F0:0B92.000B/input/input29
[ 7.117308] input: HP, Inc HyperX Virtual Surround Sound as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-8/1-8:1.3/0003:03F0:0B92.000B/input/input30
[ 7.117475] hid-generic 0003:03F0:0B92.000B: input,hiddev100,hidraw10: USB HID v1.11 Device [HP, Inc HyperX Virtual Surround Sound] on usb-0000:02:00.0-8/input3
[ 7.127312] systemd[1]: Mounted /media/mount/sdb2.
[ 7.127408] systemd[1]: Reached target Local File Systems.
[ 7.128246] systemd[1]: Listening on Boot Entries Service Socket.
[ 7.129005] systemd[1]: Listening on System Extension Image Management.
[ 7.129061] systemd[1]: Rebuild Dynamic Linker Cache was skipped because no trigger condition checks were met.
[ 7.130120] systemd[1]: Starting Set Up Additional Binary Formats...
[ 7.130140] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
[ 7.175467] Bluetooth: Core ver 2.22
[ 7.175485] NET: Registered PF_BLUETOOTH protocol family
[ 7.175486] Bluetooth: HCI device and connection manager initialized
[ 7.175489] Bluetooth: HCI socket layer initialized
[ 7.175491] Bluetooth: L2CAP socket layer initialized
[ 7.175494] Bluetooth: SCO socket layer initialized
[ 7.190842] usbcore: registered new interface driver btusb
[ 7.193603] systemd[1]: Reached target Bluetooth Support.
[ 7.207370] systemd[1]: Started Journal Service.
[ 7.211705] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[ 7.211713] Bluetooth: hci0: Boot Address: 0x24800
[ 7.211715] Bluetooth: hci0: Firmware Version: 132-3.24
[ 7.211716] Bluetooth: hci0: Firmware already loaded
[ 7.213770] systemd-journald[376]: Received client request to flush runtime journal.
[ 7.222442] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 7.362660] usbcore: registered new interface driver snd-usb-audio
[ 8.240712] Generic FE-GE Realtek PHY r8169-0-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-a00:00, irq=MAC)
[ 8.434030] r8169 0000:0a:00.0 enp10s0: Link is Down
[ 8.630684] iwlwifi 0000:09:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 40.681864] block nvme0n1: No UUID available providing old NGUID
[ 42.658198] wlan0: authenticate with 3c:7c:3f:a5:51:4c
[ 42.662518] wlan0: send auth to 3c:7c:3f:a5:51:4c (try 1/3)
[ 42.691525] wlan0: authenticated
[ 42.696940] wlan0: associate with 3c:7c:3f:a5:51:4c (try 1/3)
[ 42.698265] wlan0: RX AssocResp from 3c:7c:3f:a5:51:4c (capab=0x1011 status=0 aid=2)
[ 42.704540] wlan0: associated
[ 42.834222] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3c:7c:3f:a5:51:4c
[ 43.113071] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 43.113074] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 45.197236] warning: `nspr-2' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 46.184563] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 50.764181] gldriverquery[2132]: segfault at 0 ip 000078151755127f sp 00007ffdb5b49e20 error 4 in libxcb.so.1.1.0[781517549000+14000] likely on CPU 15 (core 7, socket 0)
[ 50.764192] Code: 00 eb a0 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 57 41 56 41 55 45 89 c5 41 54 55 4c 89 cd 53 48 83 ec 78 48 8b 19 89 74 24 1c <8b> 37 48 89 4c 24 08 64 48 8b 04 25 28 00 00 00 48 89 44 24 68 31
[ 51.605136] gldriverquery[2193]: segfault at 0 ip 00000000f3568341 sp 00000000ffede8d0 error 4 in libxcb.so.1.1.0[f355f000+17000] likely on CPU 15 (core 7, socket 0)
[ 51.605146] Code: 71 0c 8b 19 89 45 a0 8b 41 08 89 75 b4 89 45 a4 8b 41 10 89 45 b8 8b 41 14 89 45 c0 65 a1 14 00 00 00 89 45 e4 8b 06 89 45 b0 <8b> 03 85 c0 0f 85 cb 05 00 00 8b 45 a4 85 c0 0f 84 a2 07 00 00 8bLast edited by RCrate (2024-08-06 10:54:55)
Offline
#2 2024-08-03 13:23:33
- kaz49
- Member
- Registered: 2024-08-03
- Posts: 6
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
I'm not an expert, but I have seen these symptoms happen before on my PC when it ran out of RAM. Just out of curiosity, how much RAM do you have installed?
Also, can you post the output when you run the command "swapon -s" (without the quotation marks of course) in your terminal?
Offline
#3 2024-08-04 09:32:05
- RCrate
- Member
- Registered: 2024-08-01
- Posts: 4
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
I have 16GB (8+8) of RAM installed. swapon -s outputs this:
Filename Type Size Used Priority
/dev/zram0 partition 4194300 0 100Offline
#4 2024-08-04 18:31:39
- kaz49
- Member
- Registered: 2024-08-03
- Posts: 6
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
Hmm, yeah 16 gigs does feel like it should be able to run CS2 without running out of memory... unless you have something else memory intensive running as well while you game (lots of browser tabs, another game in the background, etc)?
I am slightly concerned that the swap space you have is on zram (because swapon said the swap is at /dev/zram0), which afaik is stored in RAM itself. So if you did manage to completely fill up your 16 gigs (like with a lot of browser tabs or a memory intensive game) then your PC would have nowhere else to store crucial data and completely lock up.
This line in your Journalctl output also looks to me like there is indeed a memory shortage 
Jul 31 21:30:45 archlinux systemd-journald[403]: Under memory pressure, flushing caches. Have you ever checked how full the memory (Mem) is when you go to htop to kill CS2? Would be useful to know what that looks like when the system is hanging.
If it turns out to be a memory problem, then there are a couple of solutions so we can go from there, but again I'm not an expert so I'm still not 100% sure it's a memory problem, I don't want to give you the solution to the wrong problem and clutter up your system.
Last edited by kaz49 (2024-08-04 19:11:57)
Offline
#5 2024-08-05 12:46:49
- RCrate
- Member
- Registered: 2024-08-01
- Posts: 4
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
Alright, I started CS2 up with System Monitor beside it to see the memory usage and started playing some games. The memory usage started normal at 3GB, but from there it started slowly going up, notably increasing by ~0.2GB at every round start, and after 2 hours of playing and it reaching 10GB of memory usage the hang started. It seems to be a memory leak within the game? I started up tty3 (the login prompt took a few minutes to show up, it also was running very slowly) and ran htop. It showed that 16.0/16.4GB + all 4GB of swap were being used, and after sorting by memory usage there were ~50 CS2 processes running, more exactly "[CS2 game files]/game/bin/linuxsteamrt64/cs2 -steam", all of which were clogging up my RAM. After killing one of the processes the rest also shut down. Very weird, could this be a problem with CS2 itself? That wouldn't explain the AUR package problem I had though.
Also, I'd like to add that CS2 runs just fine on Windows.
Last edited by RCrate (2024-08-05 12:48:42)
Offline
#6 2024-08-05 15:53:08
- kaz49
- Member
- Registered: 2024-08-03
- Posts: 6
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
(Jeez, I did not realize I wrote an absolute wall of text, sorry in advance)
Yeah that does definitely sound like a memory leak might be in the game...I don't see why CS2 would need anywhere near 50 processes.
Also, that mullvad-vpn AUR package is crazy! I tried installing it just to see what happens and it had my CPU pegged at 100%, increased my memory usage by like 15GB, and took up like 15-20GB of my hard drive just in cache while building! I don't know if I've ever seen an install process go this hard on my PC before, let alone one for a VPN app, are you sure this thing's not a virus?
One potential reason why CS2 might work on Windows even with the memory leak is that Windows by default uses a system similar to Linux's swap (I think it's called "commit memory" or "pagefile" or something) where once it runs out of RAM, it makes this file on your hard disk which is just like any other file and then treats it like RAM, making the file bigger and bigger as it needs more memory so that it can never really "run out". Which is also why Windows PCs get more and more sluggish when you fill up their storage, there's no space for the extra RAM it needs! Or at least, that's my understanding of it. But then again, maybe the Windows version of CS2 just doesn't have the memory leak. Who knows ¯\_(ツ)_/¯
Linux does technically have a built-in system to prevent memory pressure from freezing systems by killing memory-hogging processes called OOM-killer on paper, but I personally never had any luck with waiting for it to kick in when my desktop froze up after running out of memory in the past. I don't really know what's going on with that, so I use a solution that doesn't rely on OOM-killer.
Ok. So now that we've identified the problem as most likely a memory shortage, there are a few options I know of, but there are probably even more that I don't know about. I'd encourage you to look around the internet for solutions to your problems if you like learning about this sort of stuff (I mean, you installed Arch, I think I can assume that you like this stuff), you might come across a silver bullet that's perfect for what you need that I didn't know about. I've found that the Arch wiki is an amazing place to find information about these things.
Anyway, here are the options that I currently know exists:
1. Get the memory leak fixed
For this, you'd probably have to submit a bug report to the game developer (CS2 was made by Valve... I think?) or look for an existing one and upvote it or something. Basically get Valve to fix the problem for you. Then again, Valve might already know about the memory leak and in that case they're probably working on a fix as we speak.
Pros:
Permanent, at least until the next memory leak gets introduced (which is hopefully not soon)
Everyone else who plays CS2 on Linux will also automatically benefit
Requires the least tinkering in your PC
Cons:
Probably a decent amount of effort required
Might take some time to get fixed
2. Buy more (or higher capacity) RAM
This is a bit of a nuclear option, but hey, more RAM never hurts!
Pros:
More RAM = harder to run out of memory = harder to make the system freeze up
More RAM is useful in a lot of scenarios both inside and outside gaming
Very simple solution
Cons:
Most expensive option
Probably only delays the death of your system if there is indeed a memory leak. Might let you get a few more hours before you have to restart CS2, at least until the memory leak is fixed
3. Swap
Basically, it does almost the same thing Windows does with the file on disk being used like RAM, except that it doesn't do the getting bigger and bigger thing that Windows does. The user sets the size of the file up front. The swap that you currently have on your PC is stored on the physical RAM itself, which AFAIK is a bit unorthodox. Usually swap goes on the disk.
Also, this is the solution I chose for my PC, so it's the one I know the most about.
Pros:
More memory for free, makes it harder to freeze everything up
Cons:
Swap speed depends on how fast your disk is at read/write, but it's generally a decent bit slower than physical RAM. So if you go past 15GB-ish stuff that's not super high priority like browser tabs might start feeling very slow and lag even on NVMe drives. I really wouldn't recommend using a spinny platter hard drive for swap.
Uses the disk, which is going to wear down the disk the same way saving/deleting a lot of data on your disk very quickly would do. So I imagine the lifespan of your disk might get somewhat shorter.
Like buying more RAM, probably only delays the death of your system if there is indeed a memory leak
You need to reserve the size of your swap space up front, which means that that amount of your disk is now unusable for normal storage (I think there might have been some third-party hacky implementations of automatic resizing swap in the past, but I dunno if any are still supported. Fingers crossed that someone implements it in the kernel at some point!)
4. Some mechanism that kills the memory-hogging process
This is (AFAIK) a bit like the built-in OOM-killer I talked about before, except that you can do/configure stuff to take action before the system freezes completely.
I'm afraid I don't know a ton about this solution, I mostly only know that it exists and a bit about how it works.
Pros:
There looks to be a pretty decent bit of customization you can do, from user-triggered killing to pre-configured limits on how much RAM can be used before automatic systems kick in
Cons:
It'll kill the process using too much memory, so one way or another CS2 will have to crash once the 2 hours are up and the system starts lagging. Not the most graceful solution
Last edited by kaz49 (2024-08-05 16:01:48)
Offline
#7 2024-08-06 10:52:47
- RCrate
- Member
- Registered: 2024-08-01
- Posts: 4
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
The problem indeed is a memory leak within CS2, I have found a GitHub issue with the same problems created in March, so it's not a problem on my part. Reopening the game after every match should be a temporary fix to this issue until the devs fix it. I have also made an 8GB swap partition on my disk so in case I hit more than 16 gigs of memory used at a time the DE doesn't implode.
Thanks for the help!
Also, Mullvad VPN is a pretty popular VPN service I have used for a few years now, and the AUR package is the one shown on the app's arch wiki page. I can say pretty confidently that it's not a virus, it is weird though that it's so intensive, the install process takes about 10 minutes which is a lot.
Offline
#8 2024-08-06 11:20:50
- kaz49
- Member
- Registered: 2024-08-03
- Posts: 6
Re: [SOLVED] KDE Plasma hangs randomly while playing Counter-Strike 2
Good to know! Though wow, March is a long time ago, the devs better be getting on that fix 
I know next to nothing about MullvadVPN, so... I dunno, if it works for you then it works I guess ¯\_(ツ)_/¯
If you reckon that this is a good enough solution for you, it's technically forum custom to prepend "[Solved]" to the topic title so other helpers can see that this topic doesn't need any more attention.
Cheers!
Last edited by kaz49 (2024-08-06 11:23:50)
Offline