You are not logged in.

Pages: 1

#1 2024-08-06 01:33:51

3ey
Member
Registered: 2024-08-05
Posts: 9

[SOLVED] Problem with microphone and headphones

Hello, I don't know yet what to write here from the system, I can describe my problem for now, a couple of days ago I installed Linux and there was a problem with sound, there is no sound in the headphones and the microphone does not work either, everything is very difficult to describe here, that is, I play with audio inputs / outputs and sometimes the headphones work, but it takes a lot of time, I played with alsamixer and pavucontrol, but without success, I also noticed that for example in the game dota 2 there is sound, that is, even in the settings the device for sound output is displayed, but in the system, although it is displayed, there is no sound, I also somehow did the opposite, that is, in the system and browsers there is sound, but in the game it is not, another problem with the microphone, when I try to chat in discord, the microphone stops working and I have to change Mono Input to audio output and back, in general, everything is complicated here, if anything, I am writing sleepy and through a translator, please help.

Last edited by 3ey (2024-08-06 19:59:09)

Offline

#2 2024-08-06 01:35:34

3ey
Member
Registered: 2024-08-05
Posts: 9

Re: [SOLVED] Problem with microphone and headphones

Sorry, I didn't fully understand how to post and accidentally posted 3 times)

Offline

#3 2024-08-06 09:39:22

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,209

Re: [SOLVED] Problem with microphone and headphones

Your problem description is all over the place, it sounds like it generally works, but maybe soemtimes not?

Symptoms sound like mixing wireplumber and pulseaudio, please post wrapped in [ code ][ /code ] tags without the spaces. 

uname -a
sudo fuser -v /dev/snd/*
systemctl --user status pipewire{,-pulse} wireplumber pulseaudio
pacman -Qs 'wire|pulse'
pactl list cards
pactl list sinks
pactl list sources
#During. active playback/recording
pactl list sink-inputs
pactl list source-outputs

Last edited by V1del (2024-08-06 14:42:47)

Offline

#4 2024-08-06 10:02:03

3ey
Member
Registered: 2024-08-05
Posts: 9

Re: [SOLVED] Problem with microphone and headphones

Sorry, but I didn't understand what "please post wrapped in [ code ][ /code ] tags without the spaces" should i send you what i got after these commands?

Last edited by 3ey (2024-08-06 10:03:39)

Offline

#5 2024-08-06 11:43:04

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,209

Re: [SOLVED] Problem with microphone and headphones

Post it here, in between those tags, see the Code heading in: https://bbs.archlinux.org/help.php#bbcode

Offline

#6 2024-08-06 14:38:29

3ey
Member
Registered: 2024-08-05
Posts: 9

Re: [SOLVED] Problem with microphone and headphones

Excuse me, please, but I still don't understand anything... Do you want me to send you something?

Offline

#7 2024-08-06 14:42:21

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,209

Re: [SOLVED] Problem with microphone and headphones

The output these commands generate.

Offline

#8 2024-08-06 15:39:03

3ey
Member
Registered: 2024-08-05
Posts: 9

Re: [SOLVED] Problem with microphone and headphones

I'm not sure I did everything right, but I hope so. I can also add that the problem is solved, but not completely, now I can make sound in the headphones by changing the audio output to audio input and back to audio output, but the sound disappears if, for example, I pause a video on YouTube and open another application, and I need to do the same action with the audio inputs to get it back, the microphone is still a problem, the sound does not appear. Also, after rebooting everything is reset and such actions no longer produce sound, in short, with each reboot you need to look for a new way to have sound) For some reason, the last 3 commands did not produce anything.

[zey@archlinux ~]$ uname -a
Linux archlinux 6.10.3-arch1-1 #1 SMP PREEMPT_DYNAMIC Sun, 04 Aug 2024 05:11:32 +0000 x86_64 GNU/Linux
[zey@archlinux ~]$ sudo fuser -v /dev/snd/*
[sudo] password for zey: 
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  zey         784 F.... pulseaudio
                     zey         861 F.... wireplumber
/dev/snd/controlC1:  zey         784 F.... pulseaudio
                     zey         861 F.... wireplumber
/dev/snd/controlC2:  zey         784 F.... pulseaudio
                     zey         861 F.... wireplumber
/dev/snd/seq:        zey         859 F.... pipewire
[zey@archlinux ~]$ systemctl --user status pipewire{,-pulse} wireplumber pulseaudio
Unit pipewire-pulse.service could not be found.
● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.servi
ce; disabled; preset: enabled)
     Active: active (running) since Tue 2024-08-06 20:13:42 +05; 3min 56s ago
 Invocation: f7910a7241534e4abc2c1269d745a337
TriggeredBy: ● pipewire.socket
   Main PID: 859 (pipewire)
      Tasks: 3 (limit: 28614)
     Memory: 7.8M (peak: 8.1M)
        CPU: 69ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─859 /usr/bin/pipewire

Aug 06 20:13:42 archlinux systemd[612]: Started PipeWire Multimedia Service.

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber
.service; enabled; preset: enabled)
     Active: active (running) since Tue 2024-08-06 20:13:42 +05; 3min 56s ago
 Invocation: 6226435eb9c94a588dd07e6015164f2c
   Main PID: 861 (wireplumber)
      Tasks: 7 (limit: 28614)
     Memory: 18.8M (peak: 19M)
        CPU: 334ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─861 /usr/bin/wireplumber

Aug 06 20:13:42 archlinux systemd[612]: Started Multimedia Service Session Manager.
Aug 06 20:13:42 archlinux wireplumber[861]: spa.bluez5: BlueZ system service is
 not available
Aug 06 20:13:42 archlinux wireplumber[861]: [0:00:27.286815838] [861] ERROR IPAModule ipa_module.cpp:172 Symbol ipa
ModuleInfo not found
Aug 06 20:13:42 archlinux wireplumber[861]: [0:00:27.286838761] [861] ERROR IPAModule ipa_module.cpp:292 v4l2-compa
t.so: IPA module has no valid info
Aug 06 20:13:42 archlinux wireplumber[861]: [0:00:27.286875089] [861]  INFO Camera camera_manager.cpp:313 libcamera
 v0.3.1

● pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.s
ervice; disabled; preset: enabled)
     Active: active (running) since Tue 2024-08-06 20:13:42 +05; 3min 57s ago
 Invocation: 324a0cff583f4463a6c451de138df482
TriggeredBy: ● pulseaudio.socket
   Main PID: 784 (pulseaudio)
      Tasks: 10 (limit: 28614)
     Memory: 74.9M (peak: 75.5M)
        CPU: 225ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pulseaudio.service
             ├─784 /usr/bin/pulseaudio --daemonize=no --log-target=journal
             └─834 /usr/lib/pulse/gsettings-helper

Aug 06 20:13:40 archlinux systemd[612]: Starting Sound Service...
Aug 06 20:13:42 archlinux systemd[612]: Started Sound Service.
[zey@archlinux ~]$ pacman -Qs 'wire|pulse'
local/gst-plugin-pipewire 1:1.2.2-1
    Multimedia graph framework - pipewire plugin
local/iwd 2.19-1
    Internet Wireless Daemon
local/kpipewire 6.1.3-1 (plasma)
    Components relating to pipewire use in Plasma
local/libcanberra 1:0.30+r2+gc0620e4-4
    A small and lightweight implementation of the XDG Sound Theme Specification
local/libpipewire 1:1.2.2-1
    Low-latency audio/video router and processor - client library
local/libpulse 17.0-3
    A featureful, general-purpose sound server (client library)
local/libraw1394 2.1.2-4
    Provides an API to the Linux IEEE1394 (FireWire) driver
local/libwireplumber 0.5.5-1
    Session / policy manager implementation for PipeWire - client library
local/linux 6.10.3.arch1-1
    The Linux kernel and modules
local/pamixer 1.6-3
    Pulseaudio command-line mixer like amixer
local/pavucontrol 1:6.1-1
    PulseAudio Volume Control
local/pipewire 1:1.2.2-1
    Low-latency audio/video router and processor
local/pipewire-alsa 1:1.2.2-1
    Low-latency audio/video router and processor - ALSA configuration
local/pipewire-audio 1:1.2.2-1
    Low-latency audio/video router and processor - Audio support
local/pipewire-jack 1:1.2.2-1
    Low-latency audio/video router and processor - JACK replacement
local/plasma-pa 6.1.3-1 (plasma)
    Plasma applet for audio volume management using PulseAudio
local/pulseaudio 17.0-3
    A featureful, general-purpose sound server
local/pulseaudio-alsa 1:1.2.12-3
    ALSA Configuration for PulseAudio
local/pulseaudio-qt 1.5.0-1
    Qt bindings for libpulse
local/wireless_tools 30.pre9-4
    Tools allowing to manipulate the Wireless Extensions
local/wireplumber 0.5.5-1
    Session / policy manager implementation for PipeWire
local/wpa_supplicant 2:2.11-2
    A utility providing key negotiation for WPA wireless networks
[zey@archlinux ~]$ pactl list cards 
Card #0
        Name: alsa_card.pci-0000_07_00.1
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 57"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:07:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0fb8"
                device.product.name = "GP108 High Definition Audio Controller"
                device.string = "0"
                device.description = "GP108 High Definition Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 38668, available: yes)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:hdmi-stereo
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "video-display"
                                device.product.name = "24B1W
       "
                        Part of profile(s): output:hdmi-stereo
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #1
        Name: alsa_card.usb-Generalplus_Usb_Audio_Device-00
        Driver: module-alsa-card.c
        Owner Module: 7
        Properties:
                alsa.card = "2"
                alsa.card_name = "Usb Audio Device"
                alsa.long_card_name = "Generalplus Usb Audio Device at usb-0000:08:00.3-4, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:08:00.3-usb-0:4:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-4/3-4:1.0/sound/card2"
                udev.id = "usb-Generalplus_Usb_Audio_Device-00"
                device.bus = "usb"
                device.vendor.id = "1b3f"
                device.vendor.name = "Generalplus Technology Inc."
                device.product.id = "2008"
                device.product.name = "Usb Audio Device"
                device.serial = "Generalplus_Usb_Audio_Device"
                device.string = "2"
                device.description = "Usb Audio Device"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        Profiles:
                input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
                output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (sinks: 1, sources: 1, priority: 6501, available: yes)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes)
                output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
                output:iec958-ac3-surround-51+input:mono-fallback: Digital Surround 5.1 (IEC958/AC3) Output + Mono Input (sinks: 1, sources: 1, priority: 301, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: input:mono-fallback
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:mono-fallback, output:analog-stereo+input:mono-fallback, output:iec958-stereo+input:mono-fallback, output:iec958-ac3-surround-51+input:mono-fallback
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-speakers"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:mono-fallback
                iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:mono-fallback

Card #2
        Name: alsa_card.pci-0000_09_00.3
        Driver: module-alsa-card.c
        Owner Module: 8
        Properties:
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xf7700000 irq 59"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:09:00.3"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "1457"
                device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
                device.string = "1"
                device.description = "Family 17h (Models 00h-0fh) HD Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 33968, available: yes)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 34068, available: yes)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 38268, available: yes)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
                output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
                output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
                analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
[zey@archlinux ~]$ pactl list sinks
Sink #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_07_00.1.hdmi-stereo
        Description: GP108 High Definition Audio Controller Digital Stereo (HDMI)
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "24B1W"
                alsa.id = "HDMI 0"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "3"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 57"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:07:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0fb8"
                device.product.name = "GP108 High Definition Audio Controller"
                device.string = "hdmi:0"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo"
                device.profile.description = "Digital Stereo (HDMI)"
                device.description = "GP108 High Definition Audio Controller Digital Stereo (HDMI)"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
        Active Port: hdmi-output-0
        Formats:
                pcm

Sink #1
        State: SUSPENDED
        Name: alsa_output.pci-0000_09_00.3.analog-stereo
        Description: Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 8
        Mute: no
        Volume: front-left: 26291 /  40% / -23.80 dB,   front-right: 26291 /  40% / -23.80 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_09_00.3.analog-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC887-VD Analog"
                alsa.id = "ALC887-VD Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xf7700000 irq 59"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:09:00.3"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "1457"
                device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-output-lineout: Line Out (type: Line, priority: 9000, available)
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, not available)
        Active Port: analog-output-lineout
        Formats:
                pcm
[zey@archlinux ~]$ pactl list sources
Source #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
        Description: Monitor of GP108 High Definition Audio Controller Digital Stereo (HDMI)
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_07_00.1.hdmi-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.description = "Monitor of GP108 High Definition Audio Controller Digital Stereo (HDMI)"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 57"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:07:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0fb8"
                device.product.name = "GP108 High Definition Audio Controller"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #1
        State: SUSPENDED
        Name: alsa_input.usb-Generalplus_Usb_Audio_Device-00.mono-fallback
        Description: Usb Audio Device Mono
        Driver: module-alsa-card.c
        Sample Specification: s16le 1ch 44100Hz
        Channel Map: mono
        Owner Module: 7
        Mute: no
        Volume: mono: 62259 /  95% / -1.34 dB
                balance 0.00
        Base Volume: 18471 /  28% / -33.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "2"
                alsa.card_name = "Usb Audio Device"
                alsa.long_card_name = "Generalplus Usb Audio Device at usb-0000:08:00.3-4, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:08:00.3-usb-0:4:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-4/3-4:1.0/sound/card2"
                udev.id = "usb-Generalplus_Usb_Audio_Device-00"
                device.bus = "usb"
                device.vendor.id = "1b3f"
                device.vendor.name = "Generalplus Technology Inc."
                device.product.id = "2008"
                device.product.name = "Usb Audio Device"
                device.serial = "Generalplus_Usb_Audio_Device"
                device.string = "hw:2"
                device.buffering.buffer_size = "176400"
                device.buffering.fragment_size = "88200"
                device.access_mode = "mmap+timer"
                device.profile.name = "mono-fallback"
                device.profile.description = "Mono"
                device.description = "Usb Audio Device Mono"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
        Active Port: analog-input-mic
        Formats:
                pcm

Source #2
        State: SUSPENDED
        Name: alsa_output.pci-0000_09_00.3.analog-stereo.monitor
        Description: Monitor of Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 8
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_09_00.3.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.description = "Monitor of Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xf7700000 irq 59"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:09:00.3"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "1457"
                device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #3
        State: SUSPENDED
        Name: alsa_input.pci-0000_09_00.3.analog-stereo
        Description: Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 8
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 6554 /  10% / -60.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC887-VD Analog"
                alsa.id = "ALC887-VD Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xf7700000 irq 59"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:09:00.3"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "1457"
                device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, not available)
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, not available)
                analog-input-linein: Line In (type: Line, priority: 8100, not available)
        Active Port: analog-input-front-mic
        Formats:
                pcm
[zey@archlinux ~]$ #During. active playback/recording
[zey@archlinux ~]$ pactl list sink-inputs
[zey@archlinux ~]$ pactl list source-outputs

Offline

#9 2024-08-06 19:44:48

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,209

Re: [SOLVED] Problem with microphone and headphones

The last two commands only produce output while attempting to play something

You're mixing wireplumber and pulseaudio which is a known problematic combination by default and likely explains all your issues. Install pipewire-pulse and let it replace pulseaudio and reboot.

Offline

#10 2024-08-06 19:58:30

3ey
Member
Registered: 2024-08-05
Posts: 9

Re: [SOLVED] Problem with microphone and headphones

Thank you very much, it seems like such a simple solution, but I suffered for 2 days) Thank you very much, but the sound is a bit quiet, but this is not a big problem

Offline

Pages: 1

Board footer

Powered by FluxBB