You are not logged in.

Pages: 1 2 3 4 5

#1 2024-08-07 13:20:11

Gnat
Member
Registered: 2024-08-07
Posts: 26

System randomly rebooting

I did a system update via yay yesterday and shut off my PC. Since this morning my machine will randomly restart. Not hang or anything, just go black and reboot.
Sometimes just seconds after logging in, sometimes after 20+ minutes. It will only happen while actively using the computer, not while it is idle.
"journalctl -b-1" seems to have nothing of interest, it just abruptly stops when the PC reboots.

I remembered that part of the updates packages yesterday was a kernel update, so i installed the linux-lts kernel but the problem persists there.
I also run a complete memtest86+ pass to exclude memory errors and that returned 0 errors.
I'm kind of out of ideas where to look for further hints as to what is causing this, any ideas?

System specs:
MINISFORUM BD770i Mainboard with Ryzen 7745HX Processor
32GB DDR5-5200 Ram
Radeon 6800XT

Offline

#2 2024-08-07 20:45:35

ZonicTrout
Member
Registered: 2023-07-20
Posts: 24

Re: System randomly rebooting

Can you give me the outputs of  

sudo pacman -Qk | grep -v "0 missing"

(Checks if pacman if missing any package files)

tail --lines=+$(sed -n '/pacman -Syu/=' /var/log/pacman.log | awk 'END { print last } { last = $0 }') /var/log/pacman.log | cat

(Gives the log of last pacman update)
and 

 sudo journalctl -b --no-pager

(Just so I can have some extra info on what is happening)
I hope to be able to get to you quickly when you post your reply, but apologies in advance if I take a bit!

Offline

#3 2024-08-07 21:45:00

cryptearth
Member
Registered: 2024-02-03
Posts: 908

Re: System randomly rebooting

although it can be anything my first guess is on the power supply - what model is it?

Offline

#4 2024-08-08 06:47:28

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

I have literally the same issue currently.

Specs:
Lenovo IdeaPad Slim 3 15AMN8 (82XQ)
AMD Ryzen 5 7520U with Radeon 610M, 16 GiB of RAM, and the latest BIOS (L1CN40WW)
Journal doesn't have anything, and systemd complains that the system had crashed, and no log could be saved in the boot messages. Running on an LTS kernel doesn't help.

sudo pacman -Qk | grep -v "0 missing"

doesn't produce anything.

tail --lines=+$(sed -n '/pacman -Syu/=' /var/log/pacman.log | awk 'END { print last } { last = $0 }') /var/log/pacman.log | cat

produces this:

[2024-08-08T09:35:18+0300] [PACMAN] Running 'pacman -Syu'
[2024-08-08T09:35:18+0300] [PACMAN] synchronizing package lists
[2024-08-08T09:35:20+0300] [PACMAN] starting full system upgrade
[2024-08-08T09:36:36+0300] [ALPM] running '60-mkinitcpio-remove.hook'...
[2024-08-08T09:36:37+0300] [ALPM] transaction started
[2024-08-08T09:36:37+0300] [ALPM] upgraded glibc (2.40+r16+gaa533d58ff-1 -> 2.40+r16+gaa533d58ff-2)
[2024-08-08T09:36:37+0300] [ALPM-SCRIPTLET] Generating locales...
[2024-08-08T09:36:38+0300] [ALPM-SCRIPTLET]   crh_UA.UTF-8... done
[2024-08-08T09:36:39+0300] [ALPM-SCRIPTLET]   en_CA.UTF-8... done
[2024-08-08T09:36:41+0300] [ALPM-SCRIPTLET]   en_US.UTF-8... done
[2024-08-08T09:36:42+0300] [ALPM-SCRIPTLET]   uk_UA.UTF-8... done
[2024-08-08T09:36:42+0300] [ALPM-SCRIPTLET] Generation complete.
[2024-08-08T09:36:42+0300] [ALPM] upgraded gcc-libs (14.2.1+r26+g14fa2b2ae7f-1 -> 14.2.1+r32+geccf707e5ce-1)
[2024-08-08T09:36:42+0300] [ALPM] upgraded abseil-cpp (20240116.2-3 -> 20240722.0-1)
[2024-08-08T09:36:42+0300] [ALPM] upgraded protobuf (27.2-1 -> 27.3-1)
[2024-08-08T09:36:42+0300] [ALPM] upgraded libtirpc (1.3.4-1 -> 1.3.5-1)
[2024-08-08T09:36:42+0300] [ALPM] upgraded android-tools (35.0.1-2 -> 35.0.1-3)
[2024-08-08T09:36:42+0300] [ALPM] upgraded binutils (2.42+r207+g8a6764d35e5-1 -> 2.43+r4+g7999dae6961-1)
[2024-08-08T09:36:43+0300] [ALPM] upgraded gcc (14.2.1+r26+g14fa2b2ae7f-1 -> 14.2.1+r32+geccf707e5ce-1)
[2024-08-08T09:36:45+0300] [ALPM] upgraded go (2:1.22.5-1 -> 2:1.22.6-1)
[2024-08-08T09:36:45+0300] [ALPM] upgraded lib32-glibc (2.40+r16+gaa533d58ff-1 -> 2.40+r16+gaa533d58ff-2)
[2024-08-08T09:36:45+0300] [ALPM] upgraded lib32-gcc-libs (14.2.1+r26+g14fa2b2ae7f-1 -> 14.2.1+r32+geccf707e5ce-1)
[2024-08-08T09:36:45+0300] [ALPM] upgraded lib32-libtiff (4.6.0-2 -> 4.6.0-3)
[2024-08-08T09:36:45+0300] [ALPM] upgraded lib32-libtirpc (1.3.4-1 -> 1.3.5-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded libx11 (1.8.9-1 -> 1.8.10-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded lib32-libx11 (1.8.9-1 -> 1.8.10-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded lib32-wayland (1.22.0-1 -> 1.23.0-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded lib32-libva (2.21.0-1 -> 2.22.0-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded lib32-libxtst (1.2.4-1 -> 1.2.5-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded tdb (1.4.11-1 -> 1.4.12-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded lib32-tdb (1.4.10-1 -> 1.4.12-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded libnvme (1.9-1 -> 1.10-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded libwbclient (4.20.3-1 -> 4.20.4-1)
[2024-08-08T09:36:46+0300] [ALPM] upgraded libxdp (1.4.2-1 -> 1.4.3-1)
[2024-08-08T09:36:48+0300] [ALPM] upgraded linux (6.10.3.arch1-1 -> 6.10.3.arch1-2)
[2024-08-08T09:36:50+0300] [ALPM] upgraded linux-hardened (6.10.2.hardened1-2 -> 6.10.2.hardened1-3)
[2024-08-08T09:36:52+0300] [ALPM] upgraded linux-lts (6.6.44-2 -> 6.6.44-3)
[2024-08-08T09:36:54+0300] [ALPM] upgraded linux-zen (6.10.3.zen1-1 -> 6.10.3.zen1-2)
[2024-08-08T09:36:55+0300] [ALPM] upgraded opencv (4.10.0-3 -> 4.10.0-4)
[2024-08-08T09:36:55+0300] [ALPM] upgraded protobuf-c (1.5.0-3 -> 1.5.0-4)
[2024-08-08T09:36:55+0300] [ALPM] upgraded python-opencv (4.10.0-3 -> 4.10.0-4)
[2024-08-08T09:36:55+0300] [ALPM] upgraded python-wheel (0.43.0-4 -> 0.44.0-1)
[2024-08-08T09:36:55+0300] [ALPM] upgraded re2 (1:20240702-1 -> 1:20240702-2)
[2024-08-08T09:36:55+0300] [ALPM] upgraded rpcbind (1.2.6-4 -> 1.2.7-1)
[2024-08-08T09:36:55+0300] [ALPM] upgraded smbclient (4.20.3-1 -> 4.20.4-1)
[2024-08-08T09:36:55+0300] [ALPM] upgraded vhba-module (20240202-39 -> 20240202-40)
[2024-08-08T09:36:55+0300] [ALPM] upgraded vlc (3.0.21-1 -> 3.0.21-2)
[2024-08-08T09:36:55+0300] [ALPM] upgraded xorg-xwayland (24.1.1-1 -> 24.1.2-1)
[2024-08-08T09:36:55+0300] [ALPM] transaction completed
[2024-08-08T09:36:56+0300] [ALPM] running '20-systemd-sysusers.hook'...
[2024-08-08T09:36:57+0300] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2024-08-08T09:36:58+0300] [ALPM] running '30-systemd-tmpfiles.hook'...
[2024-08-08T09:36:58+0300] [ALPM] running '30-systemd-update.hook'...
[2024-08-08T09:36:58+0300] [ALPM] running '60-depmod.hook'...
[2024-08-08T09:37:04+0300] [ALPM] running '90-mkinitcpio-install.hook'...
[2024-08-08T09:37:05+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-hardened.preset: 'default'
[2024-08-08T09:37:05+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:05+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-hardened -g /boot/initramfs-linux-hardened.img
[2024-08-08T09:37:05+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.10.2-hardened1-3-hardened'
[2024-08-08T09:37:05+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:06+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-hardened.img'
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-hardened.preset: 'fallback'
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-hardened -g /boot/initramfs-linux-hardened-fallback.img -S autodetect
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.10.2-hardened1-3-hardened'
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:07+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:08+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:08+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:09+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:09+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:09+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:11+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:12+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:14+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:14+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-hardened-fallback.img'
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.10.3-arch1-2'
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:15+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:16+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux-fallback.img -S autodetect
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.10.3-arch1-2'
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:17+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:18+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:18+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:18+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:21+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:22+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:23+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
[2024-08-08T09:37:24+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.10.3-zen1-2-zen'
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:25+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-zen.img'
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.10.3-zen1-2-zen'
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:26+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:27+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:27+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:28+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:28+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:28+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:30+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:31+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:33+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:33+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -g /boot/initramfs-linux-lts.img
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.6.44-3-lts'
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:34+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-lts.img'
[2024-08-08T09:37:35+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET] ==> Starting build: '6.6.44-3-lts'
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2024-08-08T09:37:36+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2024-08-08T09:37:37+0300] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2024-08-08T09:37:37+0300] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2024-08-08T09:37:37+0300] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2024-08-08T09:37:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2024-08-08T09:37:40+0300] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2024-08-08T09:37:42+0300] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2024-08-08T09:37:43+0300] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-lts-fallback.img'
[2024-08-08T09:37:43+0300] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2024-08-08T09:37:43+0300] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2024-08-08T09:37:43+0300] [ALPM] running '90-packagekit-refresh.hook'...
[2024-08-08T09:37:44+0300] [ALPM] running 'gtk-update-icon-cache.hook'...
[2024-08-08T09:37:44+0300] [ALPM] running 'texinfo-install.hook'...
[2024-08-08T09:37:45+0300] [ALPM] running 'update-desktop-database.hook'...
[2024-08-08T09:37:45+0300] [ALPM] running 'update-vlc-plugin-cache.hook'...

and for 

 sudo journalctl -b --no-pager

https://privatebin.net/?aa4bc697a1b3198 … dCYQgoZnDq

(hastebin refuses to work for me right now. sorry)

Offline

#5 2024-08-08 09:29:11

seth
Member
Registered: 2012-09-03
Posts: 58,243

Re: System randomly rebooting

Spontanous reboots are typically not a software issue, the system will be undervolted, overheated, or have a bad CPU or RAM (a single memtest86+ pass is pretty meaningless itr)

https://wiki.archlinux.org/title/Ryzen#Random_reboots has a tradition of this and since the behavior seems frequently caused by core cycling, try whether "processor.max_cstate=1" stabilizes it.
(If sensors suggest that you could run a BBQ on your CPU, that's however the far more likely cause)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2024-08-08 11:55:03

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

seth wrote:

Spontaneous reboots are typically not a software issue, the system will be undervolted, overheated, or have a bad CPU or RAM (a single memtest86+ pass is pretty meaningless itr)

I ran 15 passes over 15 hours, and it came back with nothing. Plus, the CPU was always at 80C+ during the entire thing, too. Ran Lenovo's built-in UEFI diagnostics, and all tests also passed. While Ryzen CPUs crashing is a semi-common thing, I doubt that two people both with 7xxx series laptop chips (even if one is a Zen 4 chip and the other one is a Zen 2) suddenly started having literally the same issue on the same day after an update. I literally had a crash while writing this, and the CPU was at 40C during it.

Thanks for the link, tho. Will absolutely try it and report back.

Offline

#7 2024-08-08 12:00:44

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

Also, just as a sanity check, I tried running it on Debian 12 for half a day, and it didn't even suggest on crashing. My guess would be some that some minor change in the microcode/firmware is at fault here.

Offline

#8 2024-08-08 12:04:18

Gnat
Member
Registered: 2024-08-07
Posts: 26

Re: System randomly rebooting

cryptearth wrote:

although it can be anything my first guess is on the power supply - what model is it?

Corsair SF750 (750W). Never Had any problems like this before, it is also not really related to power draw.
The reboot can happen when just opening a terminal or after 10 or more minutes of gaming, no real relation there. Often just seconds after log in, never before log in through!

As for the other commands, I am currently at work but will run them later.

Offline

#9 2024-08-08 12:04:26

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

xlebun wrote:

Thanks for the link, tho. Will absolutely try it and report back.

Wait, it only talks about desktop Ryzen 5000 series CPUs, with errors in dmesg and voltage. We're I'm on a laptop, (EDIT: OP is somehow using a laptop chip on a Desktop?) and I doubt we I can do anything to manually change the voltage. Plus, it would be awful for the battery.

Last edited by xlebun (2024-08-08 12:07:14)

Offline

#10 2024-08-08 12:21:35

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

seth wrote:

try whether "processor.max_cstate=1" stabilizes it.

It didn't help. At all.

Offline

#11 2024-08-08 13:05:05

seth
Member
Registered: 2012-09-03
Posts: 58,243

Re: System randomly rebooting

amd-ucode and linux-firmware haven't updated in ~a month, so the next thing would be to try the LTS kernel.
Sanity check: there's no parallel windows, is there?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2024-08-08 13:41:22

Gnat
Member
Registered: 2024-08-07
Posts: 26

Re: System randomly rebooting

seth wrote:

amd-ucode and linux-firmware haven't updated in ~a month, so the next thing would be to try the LTS kernel.
Sanity check: there's no parallel windows, is there?

Have already tried the linux-lts kernel with the exact same result (see top post).
No other OS installed, only arch

Offline

#13 2024-08-08 13:44:37

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

Same here: tried LTS to no avail, and only have Arch installed. No other distro or Windows  in dual boot or on any other drive.

Offline

#14 2024-08-08 13:59:44

seth
Member
Registered: 2012-09-03
Posts: 58,243

Re: System randomly rebooting

@Gnat,

I did a system update via yay yesterday and shut off my PC.

So what was updated? Check the pacman log

@xlebun, did this start for you "just now" or some weeks ago?
You both have AMD GPUs, mesa might be a candidate here (mesa bug => GPU power draw spike => CPU trips into a hole => reboot)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2024-08-08 14:14:56

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

seth wrote:

@xlebun, did this start for you "just now" or some weeks ago?

It started on 5th of August for me, precisely. I was too busy with work to post (plus, I needed to make sure it's not just my PSU or laptop failing, but I think post #7 confirms it's not), so I was just testing things to see what might be the culprit (unplugging all USB devices, running off battery, X.Org vs. Wayland. All that kind of stuff), and nothing mde it change.

Here's my pacman.log since the 1st of August, if that helps:

https://privatebin.net/?de7228a230e2d73 … 17jGTQWg6U

Last edited by xlebun (2024-08-08 14:17:22)

Offline

#16 2024-08-08 14:21:23

xlebun
Member
Registered: 2022-02-04
Posts: 12

Re: System randomly rebooting

Actually, mesa did update on 4th of August. I might try downgrading it, when I'm back at the computer.

Offline

#17 2024-08-08 16:40:41

ZonicTrout
Member
Registered: 2023-07-20
Posts: 24

Re: System randomly rebooting

Gnat wrote:

Often just seconds after log in, never before log in through!

Does the same thing happen if you log in as a separate user? (e.g. root, random_user, etc.)

Also, do you use a display manager, or do you use startx, or something on Wayland?

Last edited by ZonicTrout (2024-08-08 16:42:15)

Offline

#18 2024-08-08 17:03:58

Gnat
Member
Registered: 2024-08-07
Posts: 26

Re: System randomly rebooting

ZonicTrout wrote:

Can you give me the outputs of  

sudo pacman -Qk | grep -v "0 missing"

(Checks if pacman if missing any package files)

tail --lines=+$(sed -n '/pacman -Syu/=' /var/log/pacman.log | awk 'END { print last } { last = $0 }') /var/log/pacman.log | cat

(Gives the log of last pacman update)
and 

 sudo journalctl -b --no-pager

(Just so I can have some extra info on what is happening)
I hope to be able to get to you quickly when you post your reply, but apologies in advance if I take a bit!

sudo pacman -Qk | grep -v "0 missing"

empty

tail --lines=+$(sed -n '/pacman -Syu/=' /var/log/pacman.log | awk 'END { print last } { last = $0 }') /var/log/pacman.log | cat

tail: invalid number of lines: ‘+’

I think this is because i never ran pacman -Syu on this system, always used yay for updates.

 sudo journalctl -b --no-pager

https://pastebin.com/22v463rf

ZonicTrout wrote:
Gnat wrote:

Often just seconds after log in, never before log in through!

Does the same thing happen if you log in as a separate user? (e.g. root, random_user, etc.)

Also, do you use a display manager, or do you use startx, or something on Wayland?

Other user: did not yet try.
Desktop is XFCE

Last edited by Gnat (2024-08-08 17:04:43)

Offline

#19 2024-08-08 17:41:42

Gnat
Member
Registered: 2024-08-07
Posts: 26

Re: System randomly rebooting

ZonicTrout wrote:
Gnat wrote:

Often just seconds after log in, never before log in through!

Does the same thing happen if you log in as a separate user? (e.g. root, random_user, etc.)

Interresting idea. I created a second user and it would not restart...
So I'm currently disabling some background apps and will try to see what causes it.

EDIT:
Further testing also caused reboots on the second "clean" user... so it is not bound to the user account.

Last edited by Gnat (2024-08-08 19:11:52)

Offline

#20 2024-08-08 20:10:57

seth
Member
Registered: 2012-09-03
Posts: 58,243

Re: System randomly rebooting

I think this is because i never ran pacman -Syu on this system, always used yay for updates.

Just post the tail that covers the time  since when this started.
You may wanna try to downgrade mesa.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#21 2024-08-08 20:38:11

seth
Member
Registered: 2012-09-03
Posts: 58,243

Re: System randomly rebooting

https://bbs.archlinux.org/viewtopic.php?id=298390 explicitly blames a kernel update, try to downgrade the kernel rather than the LTS one, the problem might have been backported.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#22 2024-08-08 20:45:52

Gnat
Member
Registered: 2024-08-07
Posts: 26

Re: System randomly rebooting

seth wrote:

https://bbs.archlinux.org/viewtopic.php?id=298390 explicitly blames a kernel update, try to downgrade the kernel rather than the LTS one, the problem might have been backported.

I've been running Fedora for the last couple of hours and it runs fine.
That post also mentions a laptop, so probably really a mobile AMD cpu issue with the latest kernel (and unfortunately also backported to the LTS kernel)

I'll try downgrading tomorrow and report back.

Last edited by Gnat (2024-08-08 20:49:47)

Offline

#23 2024-08-08 21:11:57

dobie2564
Member
Registered: 2011-09-05
Posts: 27

Re: System randomly rebooting

Seeing the same thing after updating a little while ago.  System is AMD Ryzen 9 7940HS w/ Radeon 780M Graphics (16) @ 5.263GHz, AMD ATI 65:00.0 Phoenix1

Running fine beforehand.   No pattern to it.

Offline

#24 2024-08-08 23:12:25

fedro
Member
Registered: 2024-05-20
Posts: 6

Re: System randomly rebooting

same here: amd ryzen 7950x, 64gb 5600mhz ddr5, rtx 3060.

everything worked absolutely fine until this morning, with no sudden reboots or other issues.
after upgrading to 6.10.3-zen1-2-zen, random reboots happen, apparently for no reason and nothing on journalctl seems to be related to the sudden reboots.

Offline

#25 2024-08-09 00:00:50

loqs
Member
Registered: 2014-03-06
Posts: 18,001

Re: System randomly rebooting

fedro wrote:

after upgrading to 6.10.3-zen1-2-zen, random reboots happen, apparently for no reason and nothing on journalctl seems to be related to the sudden reboots.

What was the pre upgrade kernel that does not have the issue?

Offline

Pages: 1 2 3 4 5

Board footer

Powered by FluxBB