You are not logged in.
Pages: 1
Hello,
I use Arch Linux with GNOME on Wayland with an Nvidia graphics card. I installed the proprietary drivers and everything is working great except the refresh rate of the monitor. When I try to change the refresh rate to 165hz in the GNOME settings, the screen gets no signal for a bit and then turns on with the prompt to either keep the settings or revert but with no change to the refresh rate. The max refresh rate working is 100hz.
I have a BenQ EX240N monitor and a 4060 graphics card.
I am using the Linux Zen kernel with Nvidia drivers version 560.35.03.
I am also dual booting with Windows where 165hz works correctly.
Here is some terminal output for info:
$ cat /sys/class/drm/card0-HDMI-A-1/edid | edid-decode
edid-decode (hex):
00 ff ff ff ff ff ff 00 09 d1 cc 7f 01 01 01 01
21 21 01 03 80 35 1e 78 2a cb 75 a6 56 53 9d 27
12 50 54 a5 6b 80 b3 00 a9 c0 81 bc 81 00 81 c0
81 80 61 7c 01 01 02 3a 80 18 71 38 2d 40 58 2c
45 00 0e 28 21 00 00 1e 00 00 00 ff 00 45 54 42
38 50 30 32 34 35 34 53 4c 30 00 00 00 fd 00 30
a5 1e b9 28 00 0a 20 20 20 20 20 20 00 00 00 fc
00 42 65 6e 51 20 45 58 32 34 30 4e 0a 20 01 6d
02 03 50 f1 50 90 61 60 40 3f 22 21 20 1f 13 12
11 04 03 02 01 23 09 07 07 83 01 00 00 6a 03 0c
00 10 00 38 44 20 00 00 67 d8 5d c4 01 78 80 03
6d 1a 00 00 02 01 30 a5 e6 00 00 00 00 00 e3 05
c3 01 e3 0f 06 00 e6 06 05 01 44 44 00 e2 00 d5
d0 94 80 a0 70 38 1e 40 30 20 35 00 0e 28 21 00
00 1a fc 7e 80 88 70 38 12 40 18 20 35 00 0e 28
21 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 a5
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: BNQ
Model: 32716
Serial Number: 16843009 (0x01010101)
Made in: week 33 of 2023
Basic Display Parameters & Features:
Digital display
Maximum image size: 53 cm x 30 cm
Gamma: 2.20
DPMS levels: Off
RGB color display
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6513, 0.3359
Green: 0.3261, 0.6162
Blue : 0.1533, 0.0732
White: 0.3134, 0.3291
Established Timings I & II:
IBM : 720x400 70.081663 Hz 9:5 31.467 kHz 28.320000 MHz
DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
DMT 0x06: 640x480 75.000000 Hz 4:3 37.500 kHz 31.500000 MHz
DMT 0x09: 800x600 60.316541 Hz 4:3 37.879 kHz 40.000000 MHz
DMT 0x0b: 800x600 75.000000 Hz 4:3 46.875 kHz 49.500000 MHz
Apple : 832x624 74.551266 Hz 4:3 49.726 kHz 57.284000 MHz
DMT 0x10: 1024x768 60.003840 Hz 4:3 48.363 kHz 65.000000 MHz
DMT 0x12: 1024x768 75.028582 Hz 4:3 60.023 kHz 78.750000 MHz
DMT 0x24: 1280x1024 75.024675 Hz 5:4 79.976 kHz 135.000000 MHz
Apple : 1152x870 75.061550 Hz 192:145 68.681 kHz 100.000000 MHz
Standard Timings:
DMT 0x3a: 1680x1050 59.954250 Hz 16:10 65.290 kHz 146.250000 MHz
DMT 0x53: 1600x900 60.000000 Hz 16:9 60.000 kHz 108.000000 MHz (RB)
GTF : 1280x1024 120.000185 Hz 5:4 131.640 kHz 233.793000 MHz
DMT 0x1c: 1280x800 59.810326 Hz 16:10 49.702 kHz 83.500000 MHz
DMT 0x55: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz
DMT 0x23: 1280x1024 60.019740 Hz 5:4 63.981 kHz 108.000000 MHz
GTF : 1024x768 119.999931 Hz 4:3 98.760 kHz 139.054000 MHz
Detailed Timing Descriptors:
DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (526 mm x 296 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
Display Product Serial Number: 'ETB8P02454SL0'
Display Range Limits:
Monitor ranges (GTF): 48-165 Hz V, 30-185 kHz H, max dotclock 400 MHz
Display Product Name: 'BenQ EX240N'
Extension blocks: 1
Checksum: 0x6d
----------------
Block 1, CTA-861 Extension Block:
Revision: 3
Underscans IT Video Formats by default
Basic audio support
Supports YCbCr 4:4:4
Supports YCbCr 4:2:2
Native detailed modes: 1
Video Data Block:
VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (native)
VIC 97: 3840x2160 60.000000 Hz 16:9 135.000 kHz 594.000000 MHz
VIC 96: 3840x2160 50.000000 Hz 16:9 112.500 kHz 594.000000 MHz
VIC 64: 1920x1080 100.000000 Hz 16:9 112.500 kHz 297.000000 MHz
VIC 63: 1920x1080 120.000000 Hz 16:9 135.000 kHz 297.000000 MHz
VIC 34: 1920x1080 30.000000 Hz 16:9 33.750 kHz 74.250000 MHz
VIC 33: 1920x1080 25.000000 Hz 16:9 28.125 kHz 74.250000 MHz
VIC 32: 1920x1080 24.000000 Hz 16:9 27.000 kHz 74.250000 MHz
VIC 31: 1920x1080 50.000000 Hz 16:9 56.250 kHz 148.500000 MHz
VIC 19: 1280x720 50.000000 Hz 16:9 37.500 kHz 74.250000 MHz
VIC 18: 720x576 50.000000 Hz 16:9 31.250 kHz 27.000000 MHz
VIC 17: 720x576 50.000000 Hz 4:3 31.250 kHz 27.000000 MHz
VIC 4: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz
VIC 3: 720x480 59.940060 Hz 16:9 31.469 kHz 27.000000 MHz
VIC 2: 720x480 59.940060 Hz 4:3 31.469 kHz 27.000000 MHz
VIC 1: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
Audio Data Block:
Linear PCM:
Max channels: 2
Supported sample rates (kHz): 48 44.1 32
Supported sample sizes (bits): 24 20 16
Speaker Allocation Data Block:
FL/FR - Front Left/Right
Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
Source physical address: 1.0.0.0
DC_36bit
DC_30bit
DC_Y444
Maximum TMDS clock: 340 MHz
Extended HDMI video details:
Vendor-Specific Data Block (HDMI Forum), OUI C4-5D-D8:
Version: 1
Maximum TMDS Character Rate: 600 MHz
SCDC Present
Supports 12-bits/component Deep Color 4:2:0 Pixel Encoding
Supports 10-bits/component Deep Color 4:2:0 Pixel Encoding
Vendor-Specific Data Block (AMD), OUI 00-00-1A:
Version: 2.1
Minimum Refresh Rate: 48 Hz
Maximum Refresh Rate: 165 Hz
Flags 1.x: 0xe6 (MCCS)
Flags 2.x: 0x00
Maximum luminance: 0 (50.000 cd/m^2)
Minimum luminance: 0 (0.000 cd/m^2)
Unknown: 0x00 0x00
Colorimetry Data Block:
xvYCC601
xvYCC709
BT2020YCC
BT2020RGB
Gamut Boundary Description Metadata Profile P0
YCbCr 4:2:0 Capability Map Data Block:
VIC 97: 3840x2160 60.000000 Hz 16:9 135.000 kHz 594.000000 MHz
VIC 96: 3840x2160 50.000000 Hz 16:9 112.500 kHz 594.000000 MHz
HDR Static Metadata Data Block:
Electro optical transfer functions:
Traditional gamma - SDR luminance range
SMPTE ST2084
Supported static metadata descriptors:
Static metadata type 1
Desired content max luminance: 68 (218.102 cd/m^2)
Desired content max frame-average luminance: 68 (218.102 cd/m^2)
Desired content min luminance: 0 (0.000 cd/m^2)
Video Capability Data Block:
YCbCr quantization: Selectable (via AVI YQ)
RGB quantization: Selectable (via AVI Q)
PT scan behavior: Always Overscanned
IT scan behavior: Always Overscanned
CE scan behavior: Always Overscanned
Detailed Timing Descriptors:
DTD 2: 1920x1080 165.003465 Hz 16:9 183.154 kHz 380.960000 MHz (526 mm x 296 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 5 Vback 22 Vpol N
DTD 3: 1920x1080 144.000765 Hz 16:9 158.113 kHz 325.080000 MHz (526 mm x 296 mm)
Hfront 24 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 5 Vback 10 Vpol N
Checksum: 0xa5 Unused space in Extension Block: 11 bytes
Thanks in advance.
Offline
Vendor-Specific Data Block (AMD)
lspci
Have you tried gnome on X11? And then please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General (cause it looks like this might be attached to some AMD GPU)
https://www.phoronix.com/news/HDMI-2.1-OSS-Rejected (though unless it's the cable HDMI 1.4 should still be good for 1080p@144Hz)
Offline
Here are the Xorg logs.
On X11, the refresh rate does not get back if it fails and get stuck in a no signal black screen.
Also when searching the journal, I found this when you try to set the refresh rate to 165hz:
Sep 19 12:25:39 tower kernel: nvidia 0000:24:00.0: [drm] User-defined mode not supporte
d: "1920x1080": 165 380960 1920 1968 2000 2080 1080 1083 1088 1110 0x20 0x9
EDIT: The cable is HDMI 2.0 if that helps.
Last edited by mehdi.essalehi (Yesterday 17:49:47)
Offline
That's only the tail of the xorg log?
[ 728.924] (II) NVIDIA(0): Setting mode "HDMI-0: 1920x1080_165 @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
Why is it a user defined mode?
/etc/X11/xorg.conf.d/20-nvidia.conf
Section "Device"
Identifier "RTX4060"
Driver "nvidia"
Option "ModeDebug" "True"
EndSection
Also there's only the nvidia GPU, but on an oddly high bus ID - what kind of system is this, are you sure the GPU is in the PEG?
And then please post the entire X11 log and system journal for the boot:
sudo journalctl -b | curl -F 'file=@-' 0x0.st
Offline
Pages: 1