[SOLVED] Graphics issues on X with kmsdrm unless running Sway first

JetA1 · 2024-10-17 08:49:50

Hi,

I'm trying to figure out the root cause of an issue I'm having.

I'm setting up a dedicated Mame mini-cabinet using a 1024x768 display over HDMI.
I'm using a Mini-ITX Asus Prime N100I-D D4 board, the graphics driver loaded seems to be i915.

I've installed Arch from scratch and then the Mame package.
Mame works out of the box except that the graphics are distorted and the colours are wrong.
When I run an X window manager I have the same problem.
As far as I can see, X and Mame are using the kmsdrm driver.

I installed Wayland and tried Sway, and found no graphics issues.
When I exit Sway, and start Mame or an X window manager, the graphics are fine.
After reboot, the issues start again.

I tried hooking the HDMI up to a standard TV instead of the cabinet display and there were no graphics issues from the beginning.
I suspect the cabinet display does something non-standard which Sway can handle but not X or Mame, until Sway has changed something which becomes persistent (until reboot).

I've looked at logs for X and Sway, but can't find any hints as to what's going on.
Is there anyone with some deeper knowledge of Linux graphics that might have an idea?

Last edited by JetA1 (2024-10-23 14:35:53)

Lone_Wolf · 2024-10-18 10:04:44

Mame works out of the box except that the graphics are distorted and the colours are wrong.
When I run an X window manager I have the same problem.

Mame uses SDL2 , what is SDL_VIDEODRIVER set to ?

If xf86-video-intel is installed, remove it.

Which x WMs have you tried ?

JetA1 · 2024-10-18 10:55:18

Mame uses SDL2 , what is SDL_VIDEODRIVER set to ?

Mame only starts if SDL_VIDEODRIVER is set to kmsdrm or not set at all.
I've tried setting it to x11 and wayland but Mame gives me the error "Could not initialise SDL x11 not available" or "Could not initialise SDL wayland not available" and refuses to start.

If xf86-video-intel is installed, remove it.

This package was not installed.

Which x WMs have you tried ?

https://ice-wm.org

After doing some more digging it seems Wayland compositors based on wlroots set up my display correctly.
One difference between the X mode setting driver and wlroots is that wlroots uses DRM atomic commit whereas X does not.
Could this have something to do with it?

seth · 2024-10-18 13:11:48

When I exit Sway, and start Mame or an X window manager, the graphics are fine.
After reboot, the issues start again.

Race condition? SDL defaults to xwayland anyway.
Does X11 start automatically w/ the boot?
Please post the xorg logs of the first and second X11 session, https://wiki.archlinux.org/title/Xorg#General (the link is to illustrate where to find them, post the entire log, not just some greps!)

Edit: and maybe we should look into why the x11 driver doesn't work.

Mame only starts if SDL_VIDEODRIVER is set to kmsdrm or not set at all.
I've tried setting it to x11 and wayland but Mame gives me the error "Could not initialise SDL x11 not available"

But x11 is the default driver, so it's used when "not set at all"

Last edited by seth (2024-10-18 13:26:14)

JetA1 · 2024-10-18 13:49:26

seth wrote:

Edit: and maybe we should look into why the x11 driver doesn't work.

The x11 and wayland driver not working was a red herring, I've verified they both work when the respective servers are running.

The logs are from a fresh reboot (but from the same boot). X does not start automatically on boot.

Before running Sway:

[   100.317] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[   100.318] Current Operating System: Linux icade 6.11.3-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 10 Oct 2024 20:11:06 +0000 x86_64
[   100.318] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=262e8907-d50d-4c9c-a730-5352bb57fc7f zswap.enabled=0 rw rootfstype=ext4
[   100.318]  
[   100.318] Current version of pixman: 0.43.4
[   100.318] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   100.318] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   100.318] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 18 15:27:12 2024
[   100.322] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   100.322] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   100.323] (==) No Layout section.  Using the first Screen section.
[   100.323] (==) No screen section available. Using defaults.
[   100.323] (**) |-->Screen "Default Screen Section" (0)
[   100.323] (**) |   |-->Monitor "<default monitor>"
[   100.324] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   100.324] (**) Allowing byte-swapped clients
[   100.324] (==) Automatically adding devices
[   100.324] (==) Automatically enabling devices
[   100.324] (==) Automatically adding GPU devices
[   100.324] (==) Automatically binding GPU devices
[   100.325] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   100.326] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   100.326] 	Entry deleted from font path.
[   100.326] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   100.326] 	Entry deleted from font path.
[   100.326] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   100.326] 	Entry deleted from font path.
[   100.326] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   100.326] 	Entry deleted from font path.
[   100.326] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   100.326] 	Entry deleted from font path.
[   100.326] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   100.326] 	Entry deleted from font path.
[   100.326] (==) FontPath set to:
	
[   100.326] (==) ModulePath set to "/usr/lib/xorg/modules"
[   100.326] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   100.326] (II) Module ABI versions:
[   100.326] 	X.Org ANSI C Emulation: 0.4
[   100.326] 	X.Org Video Driver: 25.2
[   100.326] 	X.Org XInput driver : 24.4
[   100.326] 	X.Org Server Extension : 10.0
[   100.327] (--) using VT number 2

[   100.327] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   100.329] (II) xfree86: Adding drm device (/dev/dri/card1)
[   100.329] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[   100.345] (--) PCI:*(0@0:2:0) 8086:46d1:1043:8694 rev 0, Mem @ 0x71000000/16777216, 0x80000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[   100.345] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   100.345] (II) LoadModule: "glx"
[   100.346] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   100.361] (II) Module glx: vendor="X.Org Foundation"
[   100.361] 	compiled for 1.21.1.13, module version = 1.0.0
[   100.361] 	ABI class: X.Org Server Extension, version 10.0
[   100.361] (==) Matched intel as autoconfigured driver 0
[   100.361] (==) Matched modesetting as autoconfigured driver 1
[   100.361] (==) Matched fbdev as autoconfigured driver 2
[   100.361] (==) Matched vesa as autoconfigured driver 3
[   100.361] (==) Assigned the driver to the xf86ConfigLayout
[   100.361] (II) LoadModule: "intel"
[   100.362] (WW) Warning, couldn't open module intel
[   100.362] (EE) Failed to load module "intel" (module does not exist, 0)
[   100.362] (II) LoadModule: "modesetting"
[   100.362] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   100.605] (II) Module modesetting: vendor="X.Org Foundation"
[   100.605] 	compiled for 1.21.1.13, module version = 1.21.1
[   100.605] 	Module class: X.Org Video Driver
[   100.605] 	ABI class: X.Org Video Driver, version 25.2
[   100.605] (II) LoadModule: "fbdev"
[   100.606] (WW) Warning, couldn't open module fbdev
[   100.606] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   100.606] (II) LoadModule: "vesa"
[   100.606] (WW) Warning, couldn't open module vesa
[   100.606] (EE) Failed to load module "vesa" (module does not exist, 0)
[   100.606] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   100.639] (II) modeset(0): using drv /dev/dri/card1
[   100.640] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   100.640] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   100.640] (==) modeset(0): RGB weight 888
[   100.640] (==) modeset(0): Default visual is TrueColor
[   100.640] (II) Loading sub module "glamoregl"
[   100.640] (II) LoadModule: "glamoregl"
[   100.640] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   100.660] (II) Module glamoregl: vendor="X.Org Foundation"
[   100.660] 	compiled for 1.21.1.13, module version = 1.0.1
[   100.660] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   100.768] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL-N)
[   100.768] (II) modeset(0): glamor initialized
[   100.768] (==) modeset(0): VariableRefresh: disabled
[   100.768] (==) modeset(0): AsyncFlipSecondaries: disabled
[   100.776] (II) modeset(0): Output DP-1 has no monitor section
[   100.786] (II) modeset(0): Output HDMI-1 has no monitor section
[   100.814] (II) modeset(0): Output HDMI-2 has no monitor section
[   100.814] (II) modeset(0): Output DP-2 has no monitor section
[   100.823] (II) modeset(0): EDID for output DP-1
[   100.833] (II) modeset(0): EDID for output HDMI-1
[   100.861] (WW) EDID timing clock 148.50 exceeds claimed max 145MHz, fixing
[   100.861] (II) modeset(0): EDID for output HDMI-2
[   100.861] (II) modeset(0): Manufacturer: KEC  Model: 2a3b  Serial#: 16843009
[   100.861] (II) modeset(0): Year: 2017  Week: 14
[   100.861] (II) modeset(0): EDID Version: 1.3
[   100.861] (II) modeset(0): Digital Display Input
[   100.861] (II) modeset(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   100.861] (II) modeset(0): Gamma: 2.20
[   100.861] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[   100.861] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   100.861] (II) modeset(0): Default color space is primary color space
[   100.861] (II) modeset(0): First detailed timing is preferred mode
[   100.861] (II) modeset(0): redX: 0.682 redY: 0.312   greenX: 0.203 greenY: 0.692
[   100.861] (II) modeset(0): blueX: 0.150 blueY: 0.057   whiteX: 0.312 whiteY: 0.328
[   100.861] (II) modeset(0): Supported established timings:
[   100.861] (II) modeset(0): 720x400@70Hz
[   100.861] (II) modeset(0): 640x480@60Hz
[   100.861] (II) modeset(0): 640x480@75Hz
[   100.861] (II) modeset(0): 800x600@60Hz
[   100.861] (II) modeset(0): 800x600@75Hz
[   100.861] (II) modeset(0): 1024x768@60Hz
[   100.861] (II) modeset(0): 1024x768@75Hz
[   100.861] (II) modeset(0): 1280x1024@75Hz
[   100.861] (II) modeset(0): Manufacturer's mask: 0
[   100.861] (II) modeset(0): Supported standard timings:
[   100.861] (II) modeset(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   100.861] (II) modeset(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[   100.861] (II) modeset(0): #2: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   100.861] (II) modeset(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   100.861] (II) modeset(0): Supported detailed timing:
[   100.861] (II) modeset(0): clock: 65.0 MHz   Image Size:  255 x 255 mm
[   100.861] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[   100.861] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[   100.861] (II) modeset(0): Serial No: B3432845
[   100.861] (II) modeset(0): Monitor name: KYV
[   100.861] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 149 MHz
[   100.861] (II) modeset(0): Supported detailed timing:
[   100.861] (II) modeset(0): clock: 148.5 MHz   Image Size:  518 x 324 mm
[   100.861] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   100.861] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   100.861] (II) modeset(0): Supported detailed timing:
[   100.861] (II) modeset(0): clock: 74.2 MHz   Image Size:  518 x 324 mm
[   100.861] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   100.861] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[   100.861] (II) modeset(0): Supported detailed timing:
[   100.861] (II) modeset(0): clock: 74.2 MHz   Image Size:  518 x 324 mm
[   100.861] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[   100.861] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   100.861] (II) modeset(0): Supported detailed timing:
[   100.861] (II) modeset(0): clock: 27.0 MHz   Image Size:  518 x 324 mm
[   100.861] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[   100.861] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[   100.861] (II) modeset(0): Number of EDID sections to follow: 1
[   100.861] (II) modeset(0): EDID (in hex):
[   100.861] (II) modeset(0): 	00ffffffffffff002ca33b2a01010101
[   100.861] (II) modeset(0): 	0e1b010380291a78eeb1a0ae4f34b126
[   100.861] (II) modeset(0): 	0e5054a54b008180a940d1c0714f0101
[   100.861] (II) modeset(0): 	01010101010164190040410026301888
[   100.861] (II) modeset(0): 	3600ffff00000018000000ff00423334
[   100.861] (II) modeset(0): 	33323834350a20202020000000fc004b
[   100.861] (II) modeset(0): 	59560a202020202020202020000000fd
[   100.861] (II) modeset(0): 	00324c1e510e000a20202020202001df
[   100.861] (II) modeset(0): 	020329f15090050403020716011f1213
[   100.861] (II) modeset(0): 	14201511062309070767030c00100038
[   100.861] (II) modeset(0): 	2d83010000e3050301023a801871382d
[   100.861] (II) modeset(0): 	40582c450006442100001e011d801871
[   100.861] (II) modeset(0): 	1c1620582c250006442100009e011d00
[   100.861] (II) modeset(0): 	7251d01e206e28550006442100001e8c
[   100.861] (II) modeset(0): 	0ad08a20e02d10103e96000644210000
[   100.861] (II) modeset(0): 	1800000000000000000000000000003e
[   100.861] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   100.861] (II) modeset(0): Printing probed modes for output HDMI-2
[   100.861] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   100.861] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   100.861] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   100.861] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   100.861] (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   100.861] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   100.861] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   100.861] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   100.861] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   100.861] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   100.861] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   100.861] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   100.861] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   100.861] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   100.861] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   100.861] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   100.861] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   100.861] (II) modeset(0): EDID for output DP-2
[   100.861] (II) modeset(0): Output DP-1 disconnected
[   100.861] (II) modeset(0): Output HDMI-1 disconnected
[   100.861] (II) modeset(0): Output HDMI-2 connected
[   100.861] (II) modeset(0): Output DP-2 disconnected
[   100.861] (II) modeset(0): Using exact sizes for initial modes
[   100.861] (II) modeset(0): Output HDMI-2 using initial mode 1024x768 +0+0
[   100.861] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   100.861] (==) modeset(0): DPI set to (96, 96)
[   100.861] (II) Loading sub module "fb"
[   100.861] (II) LoadModule: "fb"
[   100.861] (II) Module "fb" already built-in
[   100.886] (==) modeset(0): Backing store enabled
[   100.886] (==) modeset(0): Silken mouse enabled
[   101.023] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   101.023] (==) modeset(0): DPMS enabled
[   101.023] (II) modeset(0): [DRI2] Setup complete
[   101.024] (II) modeset(0): [DRI2]   DRI driver: iris
[   101.024] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[   101.024] (II) Initializing extension Generic Event Extension
[   101.024] (II) Initializing extension SHAPE
[   101.024] (II) Initializing extension MIT-SHM
[   101.025] (II) Initializing extension XInputExtension
[   101.025] (II) Initializing extension XTEST
[   101.025] (II) Initializing extension BIG-REQUESTS
[   101.026] (II) Initializing extension SYNC
[   101.026] (II) Initializing extension XKEYBOARD
[   101.026] (II) Initializing extension XC-MISC
[   101.027] (II) Initializing extension SECURITY
[   101.027] (II) Initializing extension XFIXES
[   101.027] (II) Initializing extension RENDER
[   101.027] (II) Initializing extension RANDR
[   101.028] (II) Initializing extension COMPOSITE
[   101.028] (II) Initializing extension DAMAGE
[   101.028] (II) Initializing extension MIT-SCREEN-SAVER
[   101.028] (II) Initializing extension DOUBLE-BUFFER
[   101.028] (II) Initializing extension RECORD
[   101.028] (II) Initializing extension DPMS
[   101.028] (II) Initializing extension Present
[   101.028] (II) Initializing extension DRI3
[   101.028] (II) Initializing extension X-Resource
[   101.028] (II) Initializing extension XVideo
[   101.028] (II) Initializing extension XVideo-MotionCompensation
[   101.028] (II) Initializing extension GLX
[   101.047] (II) AIGLX: Loaded and initialized iris
[   101.047] (II) GLX: Initialized DRI2 GL provider for screen 0
[   101.047] (II) Initializing extension XFree86-VidModeExtension
[   101.047] (II) Initializing extension XFree86-DGA
[   101.047] (II) Initializing extension XFree86-DRI
[   101.047] (II) Initializing extension DRI2
[   101.048] (II) modeset(0): Damage tracking initialized
[   101.048] (II) modeset(0): Setting screen physical size to 270 x 203
[   101.129] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   101.129] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   101.129] (**) Power Button: Applying InputClass "system-keyboard"
[   101.129] (II) LoadModule: "libinput"
[   101.129] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   101.133] (II) Module libinput: vendor="X.Org Foundation"
[   101.133] 	compiled for 1.21.1.13, module version = 1.5.0
[   101.133] 	Module class: X.Org XInput Driver
[   101.133] 	ABI class: X.Org XInput driver, version 24.4
[   101.133] (II) Using input driver 'libinput' for 'Power Button'
[   101.133] (**) Power Button: always reports core events
[   101.133] (**) Option "Device" "/dev/input/event2"
[   101.139] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   101.139] (II) event2  - Power Button: device is a keyboard
[   101.139] (II) event2  - Power Button: device removed
[   101.183] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   101.183] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   101.183] (**) Option "xkb_model" "pc105+inet"
[   101.183] (**) Option "xkb_layout" "us"
[   101.183] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.207] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   101.207] (II) event2  - Power Button: device is a keyboard
[   101.208] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   101.208] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   101.208] (**) Video Bus: Applying InputClass "system-keyboard"
[   101.208] (II) Using input driver 'libinput' for 'Video Bus'
[   101.208] (**) Video Bus: always reports core events
[   101.208] (**) Option "Device" "/dev/input/event4"
[   101.208] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   101.208] (II) event4  - Video Bus: device is a keyboard
[   101.208] (II) event4  - Video Bus: device removed
[   101.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   101.253] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   101.253] (**) Option "xkb_model" "pc105+inet"
[   101.253] (**) Option "xkb_layout" "us"
[   101.253] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.256] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   101.257] (II) event4  - Video Bus: device is a keyboard
[   101.258] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   101.258] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   101.258] (**) Power Button: Applying InputClass "system-keyboard"
[   101.259] (II) Using input driver 'libinput' for 'Power Button'
[   101.259] (**) Power Button: always reports core events
[   101.259] (**) Option "Device" "/dev/input/event1"
[   101.261] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   101.261] (II) event1  - Power Button: device is a keyboard
[   101.261] (II) event1  - Power Button: device removed
[   101.287] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   101.287] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   101.287] (**) Option "xkb_model" "pc105+inet"
[   101.287] (**) Option "xkb_layout" "us"
[   101.287] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.290] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   101.290] (II) event1  - Power Button: device is a keyboard
[   101.292] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   101.292] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   101.292] (**) Sleep Button: Applying InputClass "system-keyboard"
[   101.292] (II) Using input driver 'libinput' for 'Sleep Button'
[   101.292] (**) Sleep Button: always reports core events
[   101.292] (**) Option "Device" "/dev/input/event0"
[   101.294] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   101.294] (II) event0  - Sleep Button: device is a keyboard
[   101.295] (II) event0  - Sleep Button: device removed
[   101.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   101.323] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   101.323] (**) Option "xkb_model" "pc105+inet"
[   101.323] (**) Option "xkb_layout" "us"
[   101.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.326] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   101.327] (II) event0  - Sleep Button: device is a keyboard
[   101.330] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event3)
[   101.331] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "libinput keyboard catchall"
[   101.331] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "system-keyboard"
[   101.331] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop '
[   101.331] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : always reports core events
[   101.331] (**) Option "Device" "/dev/input/event3"
[   101.335] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   101.335] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   101.335] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   101.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:24AE:1001.0001/input/input3/event3"
[   101.363] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop " (type: KEYBOARD, id 10)
[   101.363] (**) Option "xkb_model" "pc105+inet"
[   101.363] (**) Option "xkb_layout" "us"
[   101.363] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.368] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   101.369] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   101.372] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/event5)
[   101.372] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Applying InputClass "libinput pointer catchall"
[   101.372] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse'
[   101.372] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: always reports core events
[   101.372] (**) Option "Device" "/dev/input/event5"
[   101.376] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   101.376] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   101.377] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   101.436] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   101.437] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   101.437] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   101.437] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input5/event5"
[   101.437] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse" (type: MOUSE, id 11)
[   101.437] (**) Option "AccelerationScheme" "none"
[   101.437] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) selected scheme none/0
[   101.437] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration factor: 2.000
[   101.437] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration threshold: 4
[   101.442] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   101.442] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   101.445] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/mouse0)
[   101.445] (II) No input driver specified, ignoring this device.
[   101.445] (II) This device may have been added with another device file.
[   101.447] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control (/dev/input/event6)
[   101.447] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   101.447] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   101.447] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   101.447] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   101.447] (**) Option "Device" "/dev/input/event6"
[   101.451] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   101.451] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   101.452] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   101.483] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: needs a virtual subdevice
[   101.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   101.483] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control" (type: MOUSE, id 12)
[   101.484] (**) Option "AccelerationScheme" "none"
[   101.484] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) selected scheme none/0
[   101.484] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration factor: 2.000
[   101.484] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration threshold: 4
[   101.488] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   101.488] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   101.491] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control (/dev/input/event7)
[   101.491] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "libinput keyboard catchall"
[   101.491] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "system-keyboard"
[   101.491] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control'
[   101.491] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: always reports core events
[   101.491] (**) Option "Device" "/dev/input/event7"
[   101.495] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   101.495] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   101.496] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   101.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input7/event7"
[   101.540] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control" (type: KEYBOARD, id 13)
[   101.540] (**) Option "xkb_model" "pc105+inet"
[   101.540] (**) Option "xkb_layout" "us"
[   101.540] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.545] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   101.545] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   101.548] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event8)
[   101.548] (II) No input driver specified, ignoring this device.
[   101.548] (II) This device may have been added with another device file.
[   101.549] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[   101.549] (II) No input driver specified, ignoring this device.
[   101.549] (II) This device may have been added with another device file.
[   101.550] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[   101.550] (II) No input driver specified, ignoring this device.
[   101.550] (II) This device may have been added with another device file.
[   101.551] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
[   101.551] (II) No input driver specified, ignoring this device.
[   101.551] (II) This device may have been added with another device file.
[   101.552] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14)
[   101.552] (II) No input driver specified, ignoring this device.
[   101.552] (II) This device may have been added with another device file.
[   101.553] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[   101.553] (II) No input driver specified, ignoring this device.
[   101.553] (II) This device may have been added with another device file.
[   101.554] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[   101.554] (II) No input driver specified, ignoring this device.
[   101.554] (II) This device may have been added with another device file.
[   101.554] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[   101.555] (II) No input driver specified, ignoring this device.
[   101.555] (II) This device may have been added with another device file.
[   101.555] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[   101.555] (II) No input driver specified, ignoring this device.
[   101.555] (II) This device may have been added with another device file.
[   101.556] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[   101.556] (II) No input driver specified, ignoring this device.
[   101.556] (II) This device may have been added with another device file.
[   101.556] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event10)
[   101.556] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   101.556] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[   101.556] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[   101.557] (**) Eee PC WMI hotkeys: always reports core events
[   101.557] (**) Option "Device" "/dev/input/event10"
[   101.558] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   101.558] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   101.558] (II) event10 - Eee PC WMI hotkeys: device removed
[   101.623] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event10"
[   101.623] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[   101.623] (**) Option "xkb_model" "pc105+inet"
[   101.623] (**) Option "xkb_layout" "us"
[   101.623] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   101.626] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   101.626] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   101.628] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   101.628] (II) No input driver specified, ignoring this device.
[   101.628] (II) This device may have been added with another device file.
[   101.657] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   101.657] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   101.657] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   101.657] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   101.657] (**) Option "Device" "/dev/input/event6"
[   101.657] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is a virtual subdevice
[   101.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   101.657] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control" (type: KEYBOARD, id 15)
[   101.657] (**) Option "xkb_model" "pc105+inet"
[   101.657] (**) Option "xkb_layout" "us"
[   101.657] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.522] (WW) EDID timing clock 148.50 exceeds claimed max 145MHz, fixing
[   105.522] (II) modeset(0): EDID vendor "KEC", prod id 10811
[   105.522] (II) modeset(0): Using EDID range info for horizontal sync
[   105.522] (II) modeset(0): Using EDID range info for vertical refresh
[   105.522] (II) modeset(0): Printing DDC gathered Modelines:
[   105.522] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   105.522] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   105.522] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   105.523] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   105.523] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   105.523] (II) modeset(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   105.523] (II) modeset(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   105.523] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   105.523] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   105.523] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   105.523] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   105.523] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   105.523] (II) modeset(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   105.523] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   105.523] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   105.523] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   105.523] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   105.523] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   105.523] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   105.523] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   105.523] (II) modeset(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   105.523] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   105.523] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   105.589] (WW) EDID timing clock 148.50 exceeds claimed max 145MHz, fixing
[   105.589] (II) modeset(0): EDID vendor "KEC", prod id 10811
[   105.589] (II) modeset(0): Using hsync ranges from config file
[   105.589] (II) modeset(0): Using vrefresh ranges from config file
[   105.589] (II) modeset(0): Printing DDC gathered Modelines:
[   105.589] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   105.589] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   105.589] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   105.589] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   105.589] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   105.589] (II) modeset(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   105.589] (II) modeset(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   105.589] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   105.589] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   105.589] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   105.589] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   105.589] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   105.589] (II) modeset(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   105.589] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   105.589] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   105.589] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   105.589] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   105.589] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   105.589] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   105.589] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   105.589] (II) modeset(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   105.589] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   105.590] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   110.750] (II) event2  - Power Button: device removed
[   110.793] (II) event4  - Video Bus: device removed
[   110.873] (II) event1  - Power Button: device removed
[   110.900] (II) event0  - Sleep Button: device removed
[   110.927] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   110.943] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   110.990] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   111.017] (II) event10 - Eee PC WMI hotkeys: device removed
[   111.057] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.091] (II) UnloadModule: "libinput"
[   111.093] (II) UnloadModule: "libinput"
[   111.289] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   111.322] (==) modeset(0): DPMS enabled
[   111.322] (II) modeset(0): [DRI2] Setup complete
[   111.322] (II) modeset(0): [DRI2]   DRI driver: iris
[   111.322] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[   111.322] (II) Initializing extension Generic Event Extension
[   111.323] (II) Initializing extension SHAPE
[   111.323] (II) Initializing extension MIT-SHM
[   111.323] (II) Initializing extension XInputExtension
[   111.324] (II) Initializing extension XTEST
[   111.324] (II) Initializing extension BIG-REQUESTS
[   111.324] (II) Initializing extension SYNC
[   111.325] (II) Initializing extension XKEYBOARD
[   111.325] (II) Initializing extension XC-MISC
[   111.325] (II) Initializing extension SECURITY
[   111.326] (II) Initializing extension XFIXES
[   111.326] (II) Initializing extension RENDER
[   111.326] (II) Initializing extension RANDR
[   111.327] (II) Initializing extension COMPOSITE
[   111.327] (II) Initializing extension DAMAGE
[   111.328] (II) Initializing extension MIT-SCREEN-SAVER
[   111.328] (II) Initializing extension DOUBLE-BUFFER
[   111.328] (II) Initializing extension RECORD
[   111.329] (II) Initializing extension DPMS
[   111.329] (II) Initializing extension Present
[   111.329] (II) Initializing extension DRI3
[   111.330] (II) Initializing extension X-Resource
[   111.330] (II) Initializing extension XVideo
[   111.330] (II) Initializing extension XVideo-MotionCompensation
[   111.330] (II) Initializing extension GLX
[   111.346] (II) AIGLX: Loaded and initialized iris
[   111.346] (II) GLX: Initialized DRI2 GL provider for screen 0
[   111.346] (II) Initializing extension XFree86-VidModeExtension
[   111.346] (II) Initializing extension XFree86-DGA
[   111.346] (II) Initializing extension XFree86-DRI
[   111.346] (II) Initializing extension DRI2
[   111.346] (II) modeset(0): Damage tracking initialized
[   111.346] (II) modeset(0): Setting screen physical size to 270 x 203
[   111.379] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   111.379] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   111.379] (**) Power Button: Applying InputClass "system-keyboard"
[   111.379] (II) Using input driver 'libinput' for 'Power Button'
[   111.379] (**) Power Button: always reports core events
[   111.379] (**) Option "Device" "/dev/input/event2"
[   111.381] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   111.381] (II) event2  - Power Button: device is a keyboard
[   111.381] (II) event2  - Power Button: device removed
[   111.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   111.433] (**) Option "xkb_model" "pc105+inet"
[   111.433] (**) Option "xkb_layout" "us"
[   111.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.457] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   111.457] (II) event2  - Power Button: device is a keyboard
[   111.458] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   111.458] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   111.458] (**) Video Bus: Applying InputClass "system-keyboard"
[   111.458] (II) Using input driver 'libinput' for 'Video Bus'
[   111.458] (**) Video Bus: always reports core events
[   111.458] (**) Option "Device" "/dev/input/event4"
[   111.458] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   111.458] (II) event4  - Video Bus: device is a keyboard
[   111.458] (II) event4  - Video Bus: device removed
[   111.490] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   111.490] (**) Option "xkb_model" "pc105+inet"
[   111.490] (**) Option "xkb_layout" "us"
[   111.490] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.493] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   111.493] (II) event4  - Video Bus: device is a keyboard
[   111.495] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   111.495] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   111.495] (**) Power Button: Applying InputClass "system-keyboard"
[   111.495] (II) Using input driver 'libinput' for 'Power Button'
[   111.495] (**) Power Button: always reports core events
[   111.495] (**) Option "Device" "/dev/input/event1"
[   111.498] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   111.498] (II) event1  - Power Button: device is a keyboard
[   111.498] (II) event1  - Power Button: device removed
[   111.513] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   111.513] (**) Option "xkb_model" "pc105+inet"
[   111.513] (**) Option "xkb_layout" "us"
[   111.513] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.516] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   111.517] (II) event1  - Power Button: device is a keyboard
[   111.518] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   111.518] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   111.518] (**) Sleep Button: Applying InputClass "system-keyboard"
[   111.519] (II) Using input driver 'libinput' for 'Sleep Button'
[   111.519] (**) Sleep Button: always reports core events
[   111.519] (**) Option "Device" "/dev/input/event0"
[   111.521] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   111.521] (II) event0  - Sleep Button: device is a keyboard
[   111.521] (II) event0  - Sleep Button: device removed
[   111.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   111.537] (**) Option "xkb_model" "pc105+inet"
[   111.537] (**) Option "xkb_layout" "us"
[   111.537] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.540] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   111.540] (II) event0  - Sleep Button: device is a keyboard
[   111.544] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event3)
[   111.544] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "libinput keyboard catchall"
[   111.544] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "system-keyboard"
[   111.544] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop '
[   111.544] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : always reports core events
[   111.544] (**) Option "Device" "/dev/input/event3"
[   111.547] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   111.547] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   111.548] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   111.580] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:24AE:1001.0001/input/input3/event3"
[   111.580] (**) Option "xkb_model" "pc105+inet"
[   111.580] (**) Option "xkb_layout" "us"
[   111.580] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.585] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   111.585] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   111.588] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/event5)
[   111.588] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Applying InputClass "libinput pointer catchall"
[   111.588] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse'
[   111.588] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: always reports core events
[   111.588] (**) Option "Device" "/dev/input/event5"
[   111.592] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   111.592] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   111.593] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   111.643] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   111.643] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   111.643] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   111.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input5/event5"
[   111.644] (**) Option "AccelerationScheme" "none"
[   111.644] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) selected scheme none/0
[   111.644] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration factor: 2.000
[   111.644] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration threshold: 4
[   111.648] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   111.649] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   111.652] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/mouse0)
[   111.652] (II) No input driver specified, ignoring this device.
[   111.652] (II) This device may have been added with another device file.
[   111.654] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control (/dev/input/event6)
[   111.654] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   111.654] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   111.655] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   111.655] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   111.655] (**) Option "Device" "/dev/input/event6"
[   111.658] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   111.658] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   111.659] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   111.690] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: needs a virtual subdevice
[   111.690] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   111.690] (**) Option "AccelerationScheme" "none"
[   111.690] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) selected scheme none/0
[   111.690] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration factor: 2.000
[   111.690] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration threshold: 4
[   111.695] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   111.695] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   111.698] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control (/dev/input/event7)
[   111.698] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "libinput keyboard catchall"
[   111.698] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "system-keyboard"
[   111.698] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control'
[   111.698] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: always reports core events
[   111.698] (**) Option "Device" "/dev/input/event7"
[   111.702] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   111.702] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   111.702] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   111.746] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input7/event7"
[   111.747] (**) Option "xkb_model" "pc105+inet"
[   111.747] (**) Option "xkb_layout" "us"
[   111.747] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.751] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   111.752] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   111.755] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event8)
[   111.755] (II) No input driver specified, ignoring this device.
[   111.755] (II) This device may have been added with another device file.
[   111.756] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[   111.756] (II) No input driver specified, ignoring this device.
[   111.756] (II) This device may have been added with another device file.
[   111.757] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[   111.757] (II) No input driver specified, ignoring this device.
[   111.757] (II) This device may have been added with another device file.
[   111.758] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
[   111.758] (II) No input driver specified, ignoring this device.
[   111.758] (II) This device may have been added with another device file.
[   111.759] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14)
[   111.759] (II) No input driver specified, ignoring this device.
[   111.759] (II) This device may have been added with another device file.
[   111.760] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[   111.760] (II) No input driver specified, ignoring this device.
[   111.760] (II) This device may have been added with another device file.
[   111.761] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[   111.761] (II) No input driver specified, ignoring this device.
[   111.761] (II) This device may have been added with another device file.
[   111.761] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[   111.761] (II) No input driver specified, ignoring this device.
[   111.761] (II) This device may have been added with another device file.
[   111.762] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[   111.762] (II) No input driver specified, ignoring this device.
[   111.762] (II) This device may have been added with another device file.
[   111.763] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[   111.763] (II) No input driver specified, ignoring this device.
[   111.763] (II) This device may have been added with another device file.
[   111.763] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event10)
[   111.763] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   111.763] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[   111.763] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[   111.763] (**) Eee PC WMI hotkeys: always reports core events
[   111.763] (**) Option "Device" "/dev/input/event10"
[   111.764] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   111.764] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   111.765] (II) event10 - Eee PC WMI hotkeys: device removed
[   111.810] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event10"
[   111.810] (**) Option "xkb_model" "pc105+inet"
[   111.810] (**) Option "xkb_layout" "us"
[   111.810] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   111.813] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   111.813] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   111.815] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   111.815] (II) No input driver specified, ignoring this device.
[   111.815] (II) This device may have been added with another device file.
[   111.839] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   111.839] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   111.839] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   111.839] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   111.839] (**) Option "Device" "/dev/input/event6"
[   111.839] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is a virtual subdevice
[   111.839] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   111.839] (**) Option "xkb_model" "pc105+inet"
[   111.839] (**) Option "xkb_layout" "us"
[   111.840] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   116.354] (II) event2  - Power Button: device removed
[   116.376] (II) event4  - Video Bus: device removed
[   116.423] (II) event1  - Power Button: device removed
[   116.443] (II) event0  - Sleep Button: device removed
[   116.470] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   116.497] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   116.540] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   116.567] (II) event10 - Eee PC WMI hotkeys: device removed
[   116.610] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   116.639] (II) UnloadModule: "libinput"
[   116.639] (II) UnloadModule: "libinput"
[   116.639] (II) UnloadModule: "libinput"
[   116.640] (II) UnloadModule: "libinput"
[   116.640] (II) UnloadModule: "libinput"
[   116.640] (II) UnloadModule: "libinput"
[   116.640] (II) UnloadModule: "libinput"
[   116.640] (II) UnloadModule: "libinput"
[   116.640] (II) UnloadModule: "libinput"
[   116.641] (II) UnloadModule: "libinput"
[   116.740] (II) Server terminated successfully (0). Closing log file.

After running and exiting Sway:

[   158.311] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[   158.311] Current Operating System: Linux icade 6.11.3-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 10 Oct 2024 20:11:06 +0000 x86_64
[   158.311] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=262e8907-d50d-4c9c-a730-5352bb57fc7f zswap.enabled=0 rw rootfstype=ext4
[   158.311]  
[   158.311] Current version of pixman: 0.43.4
[   158.311] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   158.311] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   158.311] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 18 15:28:10 2024
[   158.311] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   158.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   158.311] (==) No Layout section.  Using the first Screen section.
[   158.311] (==) No screen section available. Using defaults.
[   158.311] (**) |-->Screen "Default Screen Section" (0)
[   158.311] (**) |   |-->Monitor "<default monitor>"
[   158.312] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   158.312] (**) Allowing byte-swapped clients
[   158.312] (==) Automatically adding devices
[   158.312] (==) Automatically enabling devices
[   158.312] (==) Automatically adding GPU devices
[   158.312] (==) Automatically binding GPU devices
[   158.312] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   158.312] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   158.312] 	Entry deleted from font path.
[   158.312] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   158.312] 	Entry deleted from font path.
[   158.312] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   158.312] 	Entry deleted from font path.
[   158.312] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   158.312] 	Entry deleted from font path.
[   158.312] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   158.312] 	Entry deleted from font path.
[   158.312] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   158.312] 	Entry deleted from font path.
[   158.312] (==) FontPath set to:
	
[   158.312] (==) ModulePath set to "/usr/lib/xorg/modules"
[   158.312] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   158.312] (II) Module ABI versions:
[   158.312] 	X.Org ANSI C Emulation: 0.4
[   158.312] 	X.Org Video Driver: 25.2
[   158.312] 	X.Org XInput driver : 24.4
[   158.312] 	X.Org Server Extension : 10.0
[   158.312] (--) using VT number 2

[   158.312] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   158.313] (II) xfree86: Adding drm device (/dev/dri/card1)
[   158.313] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[   158.324] (--) PCI:*(0@0:2:0) 8086:46d1:1043:8694 rev 0, Mem @ 0x71000000/16777216, 0x80000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[   158.324] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   158.324] (II) LoadModule: "glx"
[   158.324] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   158.327] (II) Module glx: vendor="X.Org Foundation"
[   158.327] 	compiled for 1.21.1.13, module version = 1.0.0
[   158.327] 	ABI class: X.Org Server Extension, version 10.0
[   158.327] (==) Matched intel as autoconfigured driver 0
[   158.327] (==) Matched modesetting as autoconfigured driver 1
[   158.327] (==) Matched fbdev as autoconfigured driver 2
[   158.327] (==) Matched vesa as autoconfigured driver 3
[   158.327] (==) Assigned the driver to the xf86ConfigLayout
[   158.327] (II) LoadModule: "intel"
[   158.327] (WW) Warning, couldn't open module intel
[   158.327] (EE) Failed to load module "intel" (module does not exist, 0)
[   158.327] (II) LoadModule: "modesetting"
[   158.327] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   158.344] (II) Module modesetting: vendor="X.Org Foundation"
[   158.344] 	compiled for 1.21.1.13, module version = 1.21.1
[   158.344] 	Module class: X.Org Video Driver
[   158.344] 	ABI class: X.Org Video Driver, version 25.2
[   158.344] (II) LoadModule: "fbdev"
[   158.344] (WW) Warning, couldn't open module fbdev
[   158.344] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   158.344] (II) LoadModule: "vesa"
[   158.344] (WW) Warning, couldn't open module vesa
[   158.344] (EE) Failed to load module "vesa" (module does not exist, 0)
[   158.344] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   158.370] (II) modeset(0): using drv /dev/dri/card1
[   158.370] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   158.370] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   158.370] (==) modeset(0): RGB weight 888
[   158.370] (==) modeset(0): Default visual is TrueColor
[   158.370] (II) Loading sub module "glamoregl"
[   158.370] (II) LoadModule: "glamoregl"
[   158.370] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   158.376] (II) Module glamoregl: vendor="X.Org Foundation"
[   158.376] 	compiled for 1.21.1.13, module version = 1.0.1
[   158.376] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   158.386] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL-N)
[   158.386] (II) modeset(0): glamor initialized
[   158.386] (==) modeset(0): VariableRefresh: disabled
[   158.386] (==) modeset(0): AsyncFlipSecondaries: disabled
[   158.393] (II) modeset(0): Output DP-1 has no monitor section
[   158.403] (II) modeset(0): Output HDMI-1 has no monitor section
[   158.430] (II) modeset(0): Output HDMI-2 has no monitor section
[   158.430] (II) modeset(0): Output DP-2 has no monitor section
[   158.440] (II) modeset(0): EDID for output DP-1
[   158.450] (II) modeset(0): EDID for output HDMI-1
[   158.477] (WW) EDID timing clock 148.50 exceeds claimed max 145MHz, fixing
[   158.477] (II) modeset(0): EDID for output HDMI-2
[   158.477] (II) modeset(0): Manufacturer: KEC  Model: 2a3b  Serial#: 16843009
[   158.477] (II) modeset(0): Year: 2017  Week: 14
[   158.477] (II) modeset(0): EDID Version: 1.3
[   158.477] (II) modeset(0): Digital Display Input
[   158.477] (II) modeset(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   158.477] (II) modeset(0): Gamma: 2.20
[   158.477] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[   158.477] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   158.477] (II) modeset(0): Default color space is primary color space
[   158.477] (II) modeset(0): First detailed timing is preferred mode
[   158.477] (II) modeset(0): redX: 0.682 redY: 0.312   greenX: 0.203 greenY: 0.692
[   158.477] (II) modeset(0): blueX: 0.150 blueY: 0.057   whiteX: 0.312 whiteY: 0.328
[   158.477] (II) modeset(0): Supported established timings:
[   158.477] (II) modeset(0): 720x400@70Hz
[   158.477] (II) modeset(0): 640x480@60Hz
[   158.477] (II) modeset(0): 640x480@75Hz
[   158.477] (II) modeset(0): 800x600@60Hz
[   158.477] (II) modeset(0): 800x600@75Hz
[   158.477] (II) modeset(0): 1024x768@60Hz
[   158.477] (II) modeset(0): 1024x768@75Hz
[   158.477] (II) modeset(0): 1280x1024@75Hz
[   158.477] (II) modeset(0): Manufacturer's mask: 0
[   158.477] (II) modeset(0): Supported standard timings:
[   158.477] (II) modeset(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   158.477] (II) modeset(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[   158.477] (II) modeset(0): #2: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   158.477] (II) modeset(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   158.477] (II) modeset(0): Supported detailed timing:
[   158.477] (II) modeset(0): clock: 65.0 MHz   Image Size:  255 x 255 mm
[   158.477] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[   158.478] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[   158.478] (II) modeset(0): Serial No: B3432845
[   158.478] (II) modeset(0): Monitor name: KYV
[   158.478] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 149 MHz
[   158.478] (II) modeset(0): Supported detailed timing:
[   158.478] (II) modeset(0): clock: 148.5 MHz   Image Size:  518 x 324 mm
[   158.478] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   158.478] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   158.478] (II) modeset(0): Supported detailed timing:
[   158.478] (II) modeset(0): clock: 74.2 MHz   Image Size:  518 x 324 mm
[   158.478] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   158.478] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[   158.478] (II) modeset(0): Supported detailed timing:
[   158.478] (II) modeset(0): clock: 74.2 MHz   Image Size:  518 x 324 mm
[   158.478] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[   158.478] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   158.478] (II) modeset(0): Supported detailed timing:
[   158.478] (II) modeset(0): clock: 27.0 MHz   Image Size:  518 x 324 mm
[   158.478] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[   158.478] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[   158.478] (II) modeset(0): Number of EDID sections to follow: 1
[   158.478] (II) modeset(0): EDID (in hex):
[   158.478] (II) modeset(0): 	00ffffffffffff002ca33b2a01010101
[   158.478] (II) modeset(0): 	0e1b010380291a78eeb1a0ae4f34b126
[   158.478] (II) modeset(0): 	0e5054a54b008180a940d1c0714f0101
[   158.478] (II) modeset(0): 	01010101010164190040410026301888
[   158.478] (II) modeset(0): 	3600ffff00000018000000ff00423334
[   158.478] (II) modeset(0): 	33323834350a20202020000000fc004b
[   158.478] (II) modeset(0): 	59560a202020202020202020000000fd
[   158.478] (II) modeset(0): 	00324c1e510e000a20202020202001df
[   158.478] (II) modeset(0): 	020329f15090050403020716011f1213
[   158.478] (II) modeset(0): 	14201511062309070767030c00100038
[   158.478] (II) modeset(0): 	2d83010000e3050301023a801871382d
[   158.478] (II) modeset(0): 	40582c450006442100001e011d801871
[   158.478] (II) modeset(0): 	1c1620582c250006442100009e011d00
[   158.478] (II) modeset(0): 	7251d01e206e28550006442100001e8c
[   158.478] (II) modeset(0): 	0ad08a20e02d10103e96000644210000
[   158.478] (II) modeset(0): 	1800000000000000000000000000003e
[   158.478] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   158.478] (II) modeset(0): Printing probed modes for output HDMI-2
[   158.478] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   158.478] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   158.478] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   158.478] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   158.478] (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   158.478] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   158.478] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   158.478] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   158.478] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   158.478] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   158.478] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   158.478] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   158.478] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   158.478] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   158.478] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   158.478] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   158.478] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   158.478] (II) modeset(0): EDID for output DP-2
[   158.478] (II) modeset(0): Output DP-1 disconnected
[   158.478] (II) modeset(0): Output HDMI-1 disconnected
[   158.478] (II) modeset(0): Output HDMI-2 connected
[   158.478] (II) modeset(0): Output DP-2 disconnected
[   158.478] (II) modeset(0): Using exact sizes for initial modes
[   158.478] (II) modeset(0): Output HDMI-2 using initial mode 1024x768 +0+0
[   158.478] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   158.478] (==) modeset(0): DPI set to (96, 96)
[   158.478] (II) Loading sub module "fb"
[   158.478] (II) LoadModule: "fb"
[   158.478] (II) Module "fb" already built-in
[   158.489] (==) modeset(0): Backing store enabled
[   158.489] (==) modeset(0): Silken mouse enabled
[   158.637] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   158.637] (==) modeset(0): DPMS enabled
[   158.638] (II) modeset(0): [DRI2] Setup complete
[   158.638] (II) modeset(0): [DRI2]   DRI driver: iris
[   158.638] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[   158.638] (II) Initializing extension Generic Event Extension
[   158.638] (II) Initializing extension SHAPE
[   158.638] (II) Initializing extension MIT-SHM
[   158.639] (II) Initializing extension XInputExtension
[   158.639] (II) Initializing extension XTEST
[   158.640] (II) Initializing extension BIG-REQUESTS
[   158.640] (II) Initializing extension SYNC
[   158.640] (II) Initializing extension XKEYBOARD
[   158.641] (II) Initializing extension XC-MISC
[   158.641] (II) Initializing extension SECURITY
[   158.641] (II) Initializing extension XFIXES
[   158.641] (II) Initializing extension RENDER
[   158.642] (II) Initializing extension RANDR
[   158.642] (II) Initializing extension COMPOSITE
[   158.642] (II) Initializing extension DAMAGE
[   158.642] (II) Initializing extension MIT-SCREEN-SAVER
[   158.642] (II) Initializing extension DOUBLE-BUFFER
[   158.642] (II) Initializing extension RECORD
[   158.642] (II) Initializing extension DPMS
[   158.642] (II) Initializing extension Present
[   158.642] (II) Initializing extension DRI3
[   158.642] (II) Initializing extension X-Resource
[   158.642] (II) Initializing extension XVideo
[   158.642] (II) Initializing extension XVideo-MotionCompensation
[   158.642] (II) Initializing extension GLX
[   158.650] (II) AIGLX: Loaded and initialized iris
[   158.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[   158.650] (II) Initializing extension XFree86-VidModeExtension
[   158.651] (II) Initializing extension XFree86-DGA
[   158.651] (II) Initializing extension XFree86-DRI
[   158.651] (II) Initializing extension DRI2
[   158.651] (II) modeset(0): Damage tracking initialized
[   158.651] (II) modeset(0): Setting screen physical size to 270 x 203
[   158.685] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   158.685] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   158.685] (**) Power Button: Applying InputClass "system-keyboard"
[   158.685] (II) LoadModule: "libinput"
[   158.685] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   158.687] (II) Module libinput: vendor="X.Org Foundation"
[   158.687] 	compiled for 1.21.1.13, module version = 1.5.0
[   158.687] 	Module class: X.Org XInput Driver
[   158.687] 	ABI class: X.Org XInput driver, version 24.4
[   158.687] (II) Using input driver 'libinput' for 'Power Button'
[   158.687] (**) Power Button: always reports core events
[   158.687] (**) Option "Device" "/dev/input/event2"
[   158.688] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   158.688] (II) event2  - Power Button: device is a keyboard
[   158.688] (II) event2  - Power Button: device removed
[   158.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   158.717] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   158.717] (**) Option "xkb_model" "pc105+inet"
[   158.717] (**) Option "xkb_layout" "us"
[   158.717] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   158.748] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   158.748] (II) event2  - Power Button: device is a keyboard
[   158.749] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   158.749] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   158.749] (**) Video Bus: Applying InputClass "system-keyboard"
[   158.749] (II) Using input driver 'libinput' for 'Video Bus'
[   158.749] (**) Video Bus: always reports core events
[   158.749] (**) Option "Device" "/dev/input/event4"
[   158.749] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   158.749] (II) event4  - Video Bus: device is a keyboard
[   158.749] (II) event4  - Video Bus: device removed
[   158.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   158.780] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   158.780] (**) Option "xkb_model" "pc105+inet"
[   158.780] (**) Option "xkb_layout" "us"
[   158.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   158.783] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   158.783] (II) event4  - Video Bus: device is a keyboard
[   158.785] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   158.785] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   158.785] (**) Power Button: Applying InputClass "system-keyboard"
[   158.785] (II) Using input driver 'libinput' for 'Power Button'
[   158.785] (**) Power Button: always reports core events
[   158.785] (**) Option "Device" "/dev/input/event1"
[   158.788] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   158.788] (II) event1  - Power Button: device is a keyboard
[   158.788] (II) event1  - Power Button: device removed
[   158.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   158.813] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   158.813] (**) Option "xkb_model" "pc105+inet"
[   158.813] (**) Option "xkb_layout" "us"
[   158.813] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   158.816] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   158.817] (II) event1  - Power Button: device is a keyboard
[   158.818] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   158.819] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   158.819] (**) Sleep Button: Applying InputClass "system-keyboard"
[   158.819] (II) Using input driver 'libinput' for 'Sleep Button'
[   158.819] (**) Sleep Button: always reports core events
[   158.819] (**) Option "Device" "/dev/input/event0"
[   158.821] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   158.821] (II) event0  - Sleep Button: device is a keyboard
[   158.821] (II) event0  - Sleep Button: device removed
[   158.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   158.843] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   158.843] (**) Option "xkb_model" "pc105+inet"
[   158.843] (**) Option "xkb_layout" "us"
[   158.843] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   158.846] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   158.847] (II) event0  - Sleep Button: device is a keyboard
[   158.850] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event3)
[   158.851] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "libinput keyboard catchall"
[   158.851] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "system-keyboard"
[   158.851] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop '
[   158.851] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : always reports core events
[   158.851] (**) Option "Device" "/dev/input/event3"
[   158.854] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   158.855] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   158.855] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   158.883] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:24AE:1001.0001/input/input3/event3"
[   158.883] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop " (type: KEYBOARD, id 10)
[   158.883] (**) Option "xkb_model" "pc105+inet"
[   158.883] (**) Option "xkb_layout" "us"
[   158.883] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   158.888] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   158.888] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   158.891] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/event5)
[   158.891] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Applying InputClass "libinput pointer catchall"
[   158.891] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse'
[   158.891] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: always reports core events
[   158.892] (**) Option "Device" "/dev/input/event5"
[   158.895] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   158.896] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   158.896] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   158.966] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   158.967] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   158.967] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   158.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input5/event5"
[   158.967] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse" (type: MOUSE, id 11)
[   158.967] (**) Option "AccelerationScheme" "none"
[   158.967] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) selected scheme none/0
[   158.967] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration factor: 2.000
[   158.967] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration threshold: 4
[   158.971] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   158.971] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   158.972] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/mouse0)
[   158.972] (II) No input driver specified, ignoring this device.
[   158.972] (II) This device may have been added with another device file.
[   158.973] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control (/dev/input/event6)
[   158.973] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   158.973] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   158.973] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   158.973] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   158.973] (**) Option "Device" "/dev/input/event6"
[   158.973] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   158.973] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   158.974] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   159.010] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: needs a virtual subdevice
[   159.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   159.010] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control" (type: MOUSE, id 12)
[   159.010] (**) Option "AccelerationScheme" "none"
[   159.010] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) selected scheme none/0
[   159.010] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration factor: 2.000
[   159.010] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration threshold: 4
[   159.015] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   159.015] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   159.018] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control (/dev/input/event7)
[   159.018] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "libinput keyboard catchall"
[   159.018] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "system-keyboard"
[   159.018] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control'
[   159.018] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: always reports core events
[   159.018] (**) Option "Device" "/dev/input/event7"
[   159.022] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   159.022] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   159.023] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   159.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input7/event7"
[   159.047] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control" (type: KEYBOARD, id 13)
[   159.047] (**) Option "xkb_model" "pc105+inet"
[   159.047] (**) Option "xkb_layout" "us"
[   159.047] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   159.052] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   159.052] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   159.055] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event8)
[   159.055] (II) No input driver specified, ignoring this device.
[   159.055] (II) This device may have been added with another device file.
[   159.056] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[   159.056] (II) No input driver specified, ignoring this device.
[   159.056] (II) This device may have been added with another device file.
[   159.057] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[   159.057] (II) No input driver specified, ignoring this device.
[   159.057] (II) This device may have been added with another device file.
[   159.058] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
[   159.058] (II) No input driver specified, ignoring this device.
[   159.058] (II) This device may have been added with another device file.
[   159.059] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14)
[   159.059] (II) No input driver specified, ignoring this device.
[   159.059] (II) This device may have been added with another device file.
[   159.060] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[   159.060] (II) No input driver specified, ignoring this device.
[   159.060] (II) This device may have been added with another device file.
[   159.061] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[   159.061] (II) No input driver specified, ignoring this device.
[   159.061] (II) This device may have been added with another device file.
[   159.061] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[   159.061] (II) No input driver specified, ignoring this device.
[   159.061] (II) This device may have been added with another device file.
[   159.062] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[   159.062] (II) No input driver specified, ignoring this device.
[   159.062] (II) This device may have been added with another device file.
[   159.062] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[   159.062] (II) No input driver specified, ignoring this device.
[   159.062] (II) This device may have been added with another device file.
[   159.063] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event10)
[   159.063] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   159.063] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[   159.063] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[   159.063] (**) Eee PC WMI hotkeys: always reports core events
[   159.063] (**) Option "Device" "/dev/input/event10"
[   159.064] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   159.064] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   159.064] (II) event10 - Eee PC WMI hotkeys: device removed
[   159.130] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event10"
[   159.130] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[   159.130] (**) Option "xkb_model" "pc105+inet"
[   159.130] (**) Option "xkb_layout" "us"
[   159.130] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   159.133] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   159.133] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   159.135] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   159.135] (II) No input driver specified, ignoring this device.
[   159.135] (II) This device may have been added with another device file.
[   159.154] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   159.154] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   159.154] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   159.154] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   159.154] (**) Option "Device" "/dev/input/event6"
[   159.154] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is a virtual subdevice
[   159.154] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   159.154] (II) XINPUT: Adding extended input device "MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control" (type: KEYBOARD, id 15)
[   159.154] (**) Option "xkb_model" "pc105+inet"
[   159.154] (**) Option "xkb_layout" "us"
[   159.154] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   161.936] (WW) EDID timing clock 148.50 exceeds claimed max 145MHz, fixing
[   161.937] (II) modeset(0): EDID vendor "KEC", prod id 10811
[   161.937] (II) modeset(0): Using EDID range info for horizontal sync
[   161.937] (II) modeset(0): Using EDID range info for vertical refresh
[   161.937] (II) modeset(0): Printing DDC gathered Modelines:
[   161.937] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   161.937] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   161.937] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   161.937] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   161.937] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   161.937] (II) modeset(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   161.937] (II) modeset(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   161.937] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   161.937] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   161.937] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   161.937] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   161.937] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   161.937] (II) modeset(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   161.937] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   161.937] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   161.937] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   161.937] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   161.937] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   161.937] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   161.937] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   161.937] (II) modeset(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   161.937] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   161.937] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   162.003] (WW) EDID timing clock 148.50 exceeds claimed max 145MHz, fixing
[   162.003] (II) modeset(0): EDID vendor "KEC", prod id 10811
[   162.003] (II) modeset(0): Using hsync ranges from config file
[   162.003] (II) modeset(0): Using vrefresh ranges from config file
[   162.003] (II) modeset(0): Printing DDC gathered Modelines:
[   162.003] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   162.003] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[   162.003] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   162.003] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   162.003] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   162.003] (II) modeset(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   162.003] (II) modeset(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   162.003] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   162.003] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   162.003] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   162.003] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   162.003] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   162.003] (II) modeset(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   162.003] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   162.003] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   162.003] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   162.003] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   162.003] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   162.003] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   162.003] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   162.004] (II) modeset(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   162.004] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   162.004] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   168.025] (II) event2  - Power Button: device removed
[   168.040] (II) event4  - Video Bus: device removed
[   168.090] (II) event1  - Power Button: device removed
[   168.107] (II) event0  - Sleep Button: device removed
[   168.123] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   168.140] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   168.177] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   168.193] (II) event10 - Eee PC WMI hotkeys: device removed
[   168.237] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   168.271] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.272] (II) UnloadModule: "libinput"
[   168.273] (II) UnloadModule: "libinput"
[   168.469] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   168.502] (==) modeset(0): DPMS enabled
[   168.503] (II) modeset(0): [DRI2] Setup complete
[   168.503] (II) modeset(0): [DRI2]   DRI driver: iris
[   168.503] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[   168.503] (II) Initializing extension Generic Event Extension
[   168.503] (II) Initializing extension SHAPE
[   168.504] (II) Initializing extension MIT-SHM
[   168.504] (II) Initializing extension XInputExtension
[   168.504] (II) Initializing extension XTEST
[   168.505] (II) Initializing extension BIG-REQUESTS
[   168.505] (II) Initializing extension SYNC
[   168.505] (II) Initializing extension XKEYBOARD
[   168.506] (II) Initializing extension XC-MISC
[   168.506] (II) Initializing extension SECURITY
[   168.506] (II) Initializing extension XFIXES
[   168.507] (II) Initializing extension RENDER
[   168.507] (II) Initializing extension RANDR
[   168.508] (II) Initializing extension COMPOSITE
[   168.508] (II) Initializing extension DAMAGE
[   168.508] (II) Initializing extension MIT-SCREEN-SAVER
[   168.509] (II) Initializing extension DOUBLE-BUFFER
[   168.509] (II) Initializing extension RECORD
[   168.509] (II) Initializing extension DPMS
[   168.510] (II) Initializing extension Present
[   168.510] (II) Initializing extension DRI3
[   168.510] (II) Initializing extension X-Resource
[   168.510] (II) Initializing extension XVideo
[   168.511] (II) Initializing extension XVideo-MotionCompensation
[   168.511] (II) Initializing extension GLX
[   168.526] (II) AIGLX: Loaded and initialized iris
[   168.526] (II) GLX: Initialized DRI2 GL provider for screen 0
[   168.526] (II) Initializing extension XFree86-VidModeExtension
[   168.526] (II) Initializing extension XFree86-DGA
[   168.526] (II) Initializing extension XFree86-DRI
[   168.526] (II) Initializing extension DRI2
[   168.526] (II) modeset(0): Damage tracking initialized
[   168.526] (II) modeset(0): Setting screen physical size to 270 x 203
[   168.559] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   168.559] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   168.559] (**) Power Button: Applying InputClass "system-keyboard"
[   168.559] (II) Using input driver 'libinput' for 'Power Button'
[   168.559] (**) Power Button: always reports core events
[   168.559] (**) Option "Device" "/dev/input/event2"
[   168.560] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   168.560] (II) event2  - Power Button: device is a keyboard
[   168.560] (II) event2  - Power Button: device removed
[   168.576] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   168.577] (**) Option "xkb_model" "pc105+inet"
[   168.577] (**) Option "xkb_layout" "us"
[   168.577] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.597] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   168.597] (II) event2  - Power Button: device is a keyboard
[   168.598] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   168.598] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   168.598] (**) Video Bus: Applying InputClass "system-keyboard"
[   168.598] (II) Using input driver 'libinput' for 'Video Bus'
[   168.598] (**) Video Bus: always reports core events
[   168.598] (**) Option "Device" "/dev/input/event4"
[   168.598] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   168.598] (II) event4  - Video Bus: device is a keyboard
[   168.598] (II) event4  - Video Bus: device removed
[   168.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   168.633] (**) Option "xkb_model" "pc105+inet"
[   168.633] (**) Option "xkb_layout" "us"
[   168.633] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.636] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   168.637] (II) event4  - Video Bus: device is a keyboard
[   168.638] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   168.639] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   168.639] (**) Power Button: Applying InputClass "system-keyboard"
[   168.639] (II) Using input driver 'libinput' for 'Power Button'
[   168.639] (**) Power Button: always reports core events
[   168.639] (**) Option "Device" "/dev/input/event1"
[   168.641] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   168.641] (II) event1  - Power Button: device is a keyboard
[   168.641] (II) event1  - Power Button: device removed
[   168.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   168.657] (**) Option "xkb_model" "pc105+inet"
[   168.657] (**) Option "xkb_layout" "us"
[   168.657] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.660] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   168.660] (II) event1  - Power Button: device is a keyboard
[   168.662] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   168.662] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   168.662] (**) Sleep Button: Applying InputClass "system-keyboard"
[   168.662] (II) Using input driver 'libinput' for 'Sleep Button'
[   168.662] (**) Sleep Button: always reports core events
[   168.662] (**) Option "Device" "/dev/input/event0"
[   168.664] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   168.664] (II) event0  - Sleep Button: device is a keyboard
[   168.665] (II) event0  - Sleep Button: device removed
[   168.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   168.680] (**) Option "xkb_model" "pc105+inet"
[   168.680] (**) Option "xkb_layout" "us"
[   168.680] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.683] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   168.683] (II) event0  - Sleep Button: device is a keyboard
[   168.687] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event3)
[   168.687] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "libinput keyboard catchall"
[   168.687] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : Applying InputClass "system-keyboard"
[   168.687] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop '
[   168.687] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : always reports core events
[   168.687] (**) Option "Device" "/dev/input/event3"
[   168.691] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   168.691] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   168.691] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   168.713] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:24AE:1001.0001/input/input3/event3"
[   168.713] (**) Option "xkb_model" "pc105+inet"
[   168.713] (**) Option "xkb_layout" "us"
[   168.713] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.718] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : is tagged by udev as: Keyboard
[   168.718] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device is a keyboard
[   168.721] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/event5)
[   168.721] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Applying InputClass "libinput pointer catchall"
[   168.721] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse'
[   168.721] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: always reports core events
[   168.721] (**) Option "Device" "/dev/input/event5"
[   168.724] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   168.725] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   168.725] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   168.756] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   168.757] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   168.757] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   168.757] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input5/event5"
[   168.757] (**) Option "AccelerationScheme" "none"
[   168.757] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) selected scheme none/0
[   168.757] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration factor: 2.000
[   168.757] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: (accel) acceleration threshold: 4
[   168.762] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: is tagged by udev as: Mouse
[   168.762] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device is a pointer
[   168.765] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse (/dev/input/mouse0)
[   168.765] (II) No input driver specified, ignoring this device.
[   168.765] (II) This device may have been added with another device file.
[   168.767] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control (/dev/input/event6)
[   168.767] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   168.767] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   168.767] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   168.768] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   168.768] (**) Option "Device" "/dev/input/event6"
[   168.771] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   168.771] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   168.771] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   168.793] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: needs a virtual subdevice
[   168.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   168.793] (**) Option "AccelerationScheme" "none"
[   168.793] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) selected scheme none/0
[   168.793] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration factor: 2.000
[   168.793] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: (accel) acceleration threshold: 4
[   168.798] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is tagged by udev as: Keyboard
[   168.798] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device is a keyboard
[   168.801] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control (/dev/input/event7)
[   168.801] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "libinput keyboard catchall"
[   168.801] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: Applying InputClass "system-keyboard"
[   168.801] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control'
[   168.801] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: always reports core events
[   168.801] (**) Option "Device" "/dev/input/event7"
[   168.804] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   168.804] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   168.805] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   168.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input7/event7"
[   168.820] (**) Option "xkb_model" "pc105+inet"
[   168.820] (**) Option "xkb_layout" "us"
[   168.820] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.825] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: is tagged by udev as: Keyboard
[   168.825] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device is a keyboard
[   168.828] (II) config/udev: Adding input device MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  (/dev/input/event8)
[   168.828] (II) No input driver specified, ignoring this device.
[   168.828] (II) This device may have been added with another device file.
[   168.828] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[   168.828] (II) No input driver specified, ignoring this device.
[   168.828] (II) This device may have been added with another device file.
[   168.829] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event12)
[   168.829] (II) No input driver specified, ignoring this device.
[   168.829] (II) This device may have been added with another device file.
[   168.830] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
[   168.830] (II) No input driver specified, ignoring this device.
[   168.830] (II) This device may have been added with another device file.
[   168.830] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14)
[   168.830] (II) No input driver specified, ignoring this device.
[   168.830] (II) This device may have been added with another device file.
[   168.831] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[   168.831] (II) No input driver specified, ignoring this device.
[   168.831] (II) This device may have been added with another device file.
[   168.831] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[   168.831] (II) No input driver specified, ignoring this device.
[   168.831] (II) This device may have been added with another device file.
[   168.832] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[   168.832] (II) No input driver specified, ignoring this device.
[   168.832] (II) This device may have been added with another device file.
[   168.832] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[   168.832] (II) No input driver specified, ignoring this device.
[   168.832] (II) This device may have been added with another device file.
[   168.833] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event19)
[   168.833] (II) No input driver specified, ignoring this device.
[   168.833] (II) This device may have been added with another device file.
[   168.833] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event10)
[   168.833] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   168.833] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[   168.833] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[   168.833] (**) Eee PC WMI hotkeys: always reports core events
[   168.833] (**) Option "Device" "/dev/input/event10"
[   168.834] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   168.834] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   168.834] (II) event10 - Eee PC WMI hotkeys: device removed
[   168.873] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event10"
[   168.873] (**) Option "xkb_model" "pc105+inet"
[   168.873] (**) Option "xkb_layout" "us"
[   168.873] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   168.876] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   168.876] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[   168.878] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   168.878] (II) No input driver specified, ignoring this device.
[   168.878] (II) This device may have been added with another device file.
[   168.903] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "libinput keyboard catchall"
[   168.903] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: Applying InputClass "system-keyboard"
[   168.903] (II) Using input driver 'libinput' for 'MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control'
[   168.903] (**) MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: always reports core events
[   168.903] (**) Option "Device" "/dev/input/event6"
[   168.904] (II) libinput: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: is a virtual subdevice
[   168.904] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:24AE:1001.0002/input/input6/event6"
[   168.904] (**) Option "xkb_model" "pc105+inet"
[   168.904] (**) Option "xkb_layout" "us"
[   168.904] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   176.553] (II) event2  - Power Button: device removed
[   176.567] (II) event4  - Video Bus: device removed
[   176.600] (II) event1  - Power Button: device removed
[   176.617] (II) event0  - Sleep Button: device removed
[   176.633] (II) event3  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop : device removed
[   176.650] (II) event5  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Mouse: device removed
[   176.683] (II) event7  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  System Control: device removed
[   176.700] (II) event10 - Eee PC WMI hotkeys: device removed
[   176.733] (II) event6  - MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  Consumer Control: device removed
[   176.753] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.754] (II) UnloadModule: "libinput"
[   176.756] (II) UnloadModule: "libinput"
[   176.854] (II) Server terminated successfully (0). Closing log file.

Last edited by JetA1 (2024-10-18 13:50:45)

seth · 2024-10-18 14:27:24

Identical. modesetting on intel iris, accelerated glx.

I tried hooking the HDMI up to a standard TV instead of the cabinet display and there were no graphics issues from the beginning.

I assume you also cannot capture the artifacts on a screenshot?

Any errors in the system journal (i915/drm related)?
YOu can upload the journal

sudo journalctl -b | curl -F 'file=@-' 0x0.st

JetA1 · 2024-10-18 14:43:01

I assume you also cannot capture the artifacts on a screenshot?

I only have some photos, but since the screen is low res you can make out the artifacts quite clearly.

Faulty:
http://0x0.st/XI6k.jpeg

Correct:
http://0x0.st/XI6d.jpeg

Any errors in the system journal (i915/drm related)?

http://0x0.st/XI6I.txt

seth · 2024-10-19 07:28:33

That looks like some depth (8bpc/10bpc or 16bit/24bit) issue.

Is only SDL affected? Not eg. an xterm or glxgears? Image viewers (feh)?
What about other SDL clients, https://archlinux.org/packages/extra/x86_64/sdl2/ (right column, you might have some already)

Script to make xterm print colors:

#!/bin/sh

if [ "$1" = "256" ]; then
    for fgbg in 38 48 ; do # Foreground / Background
        echo "\\e[${fgbg};5;<number>m"
        for color in {0..255} ; do # Colors
            # Display the color
            printf "\e[${fgbg};5;%sm  %3s  \e[0m" $color $color
            # Display 16 colors per lines
            if [ $((($color + 1) % 16)) == 0 ] ; then
                echo # New line
            fi
        done
        echo # New line
    done
else
    for x in 0 1 4 5 7 8; do
        for i in {30..37}; do
            for a in {40..47}; do
                printf "\e[$x;$i;$a""m\\\e[$x;$i;$a""m\e[0m "
            done
            echo
        done
    done
    echo
fi

santanaoliva_u · 2024-10-19 20:21:53

:3

JetA1 · 2024-10-21 10:21:36

Everything drawn in the window manager is affected.
It seems to be a mode setting issue with this particular display. Other displays don't have the issue.

seth · 2024-10-21 12:04:58

Since there's no significant difference in the xorg logs:

When I run an X window manager I have the same problem.

a) what is the "window manager"
b) are you also running a compositor (picom etc)?

JetA1 · 2024-10-21 12:44:25

seth wrote:

Since there's no significant difference in the xorg logs:
When I run an X window manager I have the same problem.
a) what is the "window manager"
b) are you also running a compositor (picom etc)?

I tested with xterm in IceWM.
I'm not running a compositor.

seth · 2024-10-21 13:25:21

OK, so that'S not it.
To be clear, merely re-starting X11 doesn't suffice, you *have* to run sway inbetween? What about eg. weston?

JetA1 · 2024-10-22 09:15:36

seth wrote:

OK, so that'S not it.
To be clear, merely re-starting X11 doesn't suffice, you *have* to run sway inbetween? What about eg. weston?

Interesting: running Weston sets the display to the "bad" state.
Also, it is not only Sway that sets the display to the "good" state, any wlroots-based compositor will work. I tested by making a minimal python script using wlroots that achieves this.

Conclusions so far:

Running a wlroots-based compositor (sway, river etc.) -> Display is set to "good" state. State persists after exiting compositor.
Running weston -> Display is set to "bad" state. State persists after exiting compositor.
Running X -> No change in display state.

seth · 2024-10-22 13:01:32

Curveball: what of you blacklist snd_hda_codec_hdmi ?
(Maybe it's not so much the video signal…)

Then there's https://wiki.archlinux.org/title/Intel_ … r_X11/Xorg

And then try to use xf86-video-intel, see https://wiki.archlinux.org/title/Intel_ … ecent_GPUs and https://man.archlinux.org/man/intel.4#Option~5

Also check whether there're kernel messages rel. to i915 or drm when starting sway or weston…

JetA1 · 2024-10-23 11:58:29

seth wrote:

Curveball: what of you blacklist snd_hda_codec_hdmi ?
(Maybe it's not so much the video signal…)
Then there's https://wiki.archlinux.org/title/Intel_ … r_X11/Xorg
And then try to use xf86-video-intel, see https://wiki.archlinux.org/title/Intel_ … ecent_GPUs and https://man.archlinux.org/man/intel.4#Option~5
Also check whether there're kernel messages rel. to i915 or drm when starting sway or weston…

I didn't manage to blacklist the sound driver, seems too embedded and loaded by lots of other modules.
Tried the intel driver and the color fix, no change.
No kernel error messages, i915 and drm messages are all happy.

I can use xrandr to change resolution, but any attempts to change color depth below 24 results in errors.
Starting X with -fbbpp has no effect.

I did a screenshot with the display in "bad" state using xwd. The screenshot shows a perfect picture. What does this imply?

JetA1 · 2024-10-23 12:30:24

This is a photo of the color script for xterm in the Ice wm. Display in "bad" state.
http://0x0.st/XUz6.jpeg

This is the screenshot of the same screen.
http://0x0.st/XUzI.png

The colors are correct, but it looks like the grey is displayed with alternating white and grey rows on the display?

Last edited by JetA1 (2024-10-23 12:30:55)

seth · 2024-10-23 14:14:27

I did a screenshot with the display in "bad" state using xwd. The screenshot shows a perfect picture. What does this imply?

That the render is ok, the problem is the signal to the monitor (but that was somewhat expectable)
The output looks a bit weird because of the small terminal and the script doesn't pay any attention to the actually available colums (it's a super rudimentary color lookup thing)

xrandr --prop

JetA1 · 2024-10-23 14:23:26

Aha!

xrandr --prop

gave me different info when running on bad vs good display state:

This is the only part that differs:

Bad:

	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game

Good:

	max bpc: 8 
		range: (8, 12)
	content type: Graphics 
		supported: No Data, Graphics, Photo, Cinema, Game

seth · 2024-10-23 14:27:54

xrandr --output HDMI-2 --set 'max bpc' 8

Though, weirdly enough: https://github.com/swaywm/sway/issues/6442

JetA1 · 2024-10-23 14:33:44

seth wrote:

xrandr --output HDMI-2 --set 'max bpc' 8
Though, weirdly enough: https://github.com/swaywm/sway/issues/6442

Yep, that works! Odd indeed with the Sway issue...

The display model is called VS104T-003A in case anyone searches for the same issue.

Many thanks for your help!

No i915 module option available yet to fix this: https://gitlab.freedesktop.org/drm/i915 … ssues/1890

Last edited by JetA1 (2024-10-23 15:00:28)

Arch Linux

#1 2024-10-17 08:49:50

[SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#2 2024-10-18 10:04:44

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#3 2024-10-18 10:55:18

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#4 2024-10-18 13:11:48

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#5 2024-10-18 13:49:26

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#6 2024-10-18 14:27:24

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#7 2024-10-18 14:43:01

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#8 2024-10-19 07:28:33

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#9 2024-10-19 20:21:53

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#10 2024-10-21 10:21:36

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#11 2024-10-21 12:04:58

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#12 2024-10-21 12:44:25

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#13 2024-10-21 13:25:21

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#14 2024-10-22 09:15:36

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#15 2024-10-22 13:01:32

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#16 2024-10-23 11:58:29

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#17 2024-10-23 12:30:24

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#18 2024-10-23 14:14:27

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#19 2024-10-23 14:23:26

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#20 2024-10-23 14:27:54

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

#21 2024-10-23 14:33:44

Re: [SOLVED] Graphics issues on X with kmsdrm unless running Sway first

Board footer