You are not logged in.

#1 2024-10-27 15:10:45

sundar_ima
Member
Registered: 2011-03-14
Posts: 47

Mouse and Keyboard works only after reinserting (on every reboot)

I have been using the same USB mouse and USB Keyboard for quite some time. All worked well until few weeks back. I am not sure what actually caused this issue, but I am unable to use the mouse properly immediately post login (if mouse and keyboard are in plugged in condition during boot). The mouse will not move as intended, and the keyboard will type some other character. To solve this problem, I have to physically remove and reinsert mouse and keyboard. Thereafter, it works fine.

Any help to solve this issue is appreciated.

Offline

#2 2024-10-27 16:53:48

gromit
Package Maintainer (PM)
From: Germany
Registered: 2024-02-10
Posts: 647
Website

Re: Mouse and Keyboard works only after reinserting (on every reboot)

Does it work when you use the linux-lts kernel? Also could you post a journal/dmesg from when that happens?

Offline

#3 2024-10-28 15:52:00

sundar_ima
Member
Registered: 2011-03-14
Posts: 47

Re: Mouse and Keyboard works only after reinserting (on every reboot)

I am using LTS Kernel only. I also have the latest kernel and the issue is same. Not to mention that irrespective of wired or wireless, I have to reinsert to make it work. Below is the dmesg output:-

[    0.000000] microcode: updated early: 0xa6 -> 0xb8, date = 2024-02-15
[    0.000000] Linux version 6.6.58-1-lts (linux-lts@archlinux) (gcc (GCC) 14.2.1 20240910, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Wed, 23 Oct 2024 17:28:15 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b50befde-5daa-4f67-81e7-4fb055a6a727 rw udev.log_priority=3 fbcon=nodefer
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005df98fff] usable
[    0.000000] BIOS-e820: [mem 0x000000005df99000-0x000000005e898fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e899000-0x00000000674aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000674af000-0x000000006787efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000006787f000-0x00000000692fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000692ff000-0x0000000069b2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000069b2f000-0x0000000069bfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000069bff000-0x0000000069bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000069c00000-0x000000006dffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006e400000-0x000000006e5fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f000000-0x00000000747fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff500000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000048b7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.7 by INSYDE Corp.
[    0.000000] efi: ACPI=0x69bfe000 ACPI 2.0=0x69bfe014 TPMFinalLog=0x69ac5000 SMBIOS=0x679e3000 SMBIOS 3.0=0x679e1000 MEMATTR=0x6319e018 ESRT=0x634ab818 
[    0.000000] efi: Not removing mem73: MMIO range=[0xfe010000-0xfe010fff] (4KB) from e820 map
[    0.000000] efi: Remove mem75: MMIO range=[0xff500000-0xffffffff] (11MB) from e820 map
[    0.000000] e820: remove [mem 0xff500000-0xffffffff] reserved
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Acer TravelMate P214-53/Timpani_TL, BIOS V1.47 12/19/2022
[    0.000000] tsc: Detected 2800.000 MHz processor
[    0.000000] tsc: Detected 2803.200 MHz TSC
[    0.000004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000006] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000010] last_pfn = 0x48b800 max_arch_pfn = 0x400000000
[    0.000012] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000014] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000371] last_pfn = 0x69c00 max_arch_pfn = 0x400000000
[    0.006890] esrt: Reserving ESRT space from 0x00000000634ab818 to 0x00000000634ab8a0.
[    0.006894] e820: update [mem 0x634ab000-0x634abfff] usable ==> reserved
[    0.006903] Using GB pages for direct mapping
[    0.007009] Secure boot disabled
[    0.007010] RAMDISK: [mem 0x3551f000-0x36a86fff]
[    0.007023] ACPI: Early table checksum verification disabled
[    0.007026] ACPI: RSDP 0x0000000069BFE014 000024 (v02 ACRSYS)
[    0.007028] ACPI: XSDT 0x0000000069BCD188 00011C (v01 ACRSYS ACRPRDCT 00000002      01000013)
[    0.007032] ACPI: FACP 0x0000000069BCF000 00010C (v06 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007035] ACPI: DSDT 0x0000000069BA3000 0280F3 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007037] ACPI: FACS 0x0000000069AA0000 000040
[    0.007039] ACPI: UEFI 0x0000000069B2E000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.007041] ACPI: SSDT 0x0000000069BFA000 00255C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007043] ACPI: SSDT 0x0000000069BF6000 003DBC (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007044] ACPI: SSDT 0x0000000069BF4000 001997 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007046] ACPI: SSDT 0x0000000069BF0000 00334B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007048] ACPI: SSDT 0x0000000069BE4000 00B2DC (v02 INTEL  TcssSsdt 00001000 INTL 20160422)
[    0.007050] ACPI: SSDT 0x0000000069BE3000 00077B (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007051] ACPI: TPM2 0x0000000069BE2000 00004C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007053] ACPI: SSDT 0x0000000069BE0000 000B50 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.007055] ACPI: NHLT 0x0000000069BDF000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007057] ACPI: SSDT 0x0000000069BDD000 001285 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007058] ACPI: LPIT 0x0000000069BDC000 0000CC (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007060] ACPI: WSMT 0x0000000069BDB000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007062] ACPI: SSDT 0x0000000069BDA000 000B16 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007064] ACPI: SSDT 0x0000000069BD9000 00012A (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.007065] ACPI: DBGP 0x0000000069BD8000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007067] ACPI: DBG2 0x0000000069BD7000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007069] ACPI: SSDT 0x0000000069BD0000 006726 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007071] ACPI: HPET 0x0000000069BCE000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007072] ACPI: APIC 0x0000000069BFD000 00012C (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007074] ACPI: MCFG 0x0000000069BCC000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007076] ACPI: SSDT 0x0000000069BA1000 001218 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007078] ACPI: DMAR 0x0000000069BA0000 0000A0 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007079] ACPI: UEFI 0x0000000069A9D000 00063A (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.007081] ACPI: UEFI 0x0000000069A9C000 00005C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.007083] ACPI: SSDT 0x0000000069B9F000 000966 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007085] ACPI: SSDT 0x0000000069B9E000 0000F8 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007086] ACPI: FPDT 0x0000000069B9D000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007088] ACPI: PTDT 0x0000000069B9B000 000CFE (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[    0.007090] ACPI: BGRT 0x0000000069B9C000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.007091] ACPI: Reserving FACP table memory at [mem 0x69bcf000-0x69bcf10b]
[    0.007092] ACPI: Reserving DSDT table memory at [mem 0x69ba3000-0x69bcb0f2]
[    0.007092] ACPI: Reserving FACS table memory at [mem 0x69aa0000-0x69aa003f]
[    0.007093] ACPI: Reserving UEFI table memory at [mem 0x69b2e000-0x69b2e235]
[    0.007093] ACPI: Reserving SSDT table memory at [mem 0x69bfa000-0x69bfc55b]
[    0.007094] ACPI: Reserving SSDT table memory at [mem 0x69bf6000-0x69bf9dbb]
[    0.007094] ACPI: Reserving SSDT table memory at [mem 0x69bf4000-0x69bf5996]
[    0.007094] ACPI: Reserving SSDT table memory at [mem 0x69bf0000-0x69bf334a]
[    0.007095] ACPI: Reserving SSDT table memory at [mem 0x69be4000-0x69bef2db]
[    0.007095] ACPI: Reserving SSDT table memory at [mem 0x69be3000-0x69be377a]
[    0.007096] ACPI: Reserving TPM2 table memory at [mem 0x69be2000-0x69be204b]
[    0.007096] ACPI: Reserving SSDT table memory at [mem 0x69be0000-0x69be0b4f]
[    0.007096] ACPI: Reserving NHLT table memory at [mem 0x69bdf000-0x69bdf02c]
[    0.007097] ACPI: Reserving SSDT table memory at [mem 0x69bdd000-0x69bde284]
[    0.007097] ACPI: Reserving LPIT table memory at [mem 0x69bdc000-0x69bdc0cb]
[    0.007098] ACPI: Reserving WSMT table memory at [mem 0x69bdb000-0x69bdb027]
[    0.007098] ACPI: Reserving SSDT table memory at [mem 0x69bda000-0x69bdab15]
[    0.007098] ACPI: Reserving SSDT table memory at [mem 0x69bd9000-0x69bd9129]
[    0.007099] ACPI: Reserving DBGP table memory at [mem 0x69bd8000-0x69bd8033]
[    0.007099] ACPI: Reserving DBG2 table memory at [mem 0x69bd7000-0x69bd7053]
[    0.007099] ACPI: Reserving SSDT table memory at [mem 0x69bd0000-0x69bd6725]
[    0.007100] ACPI: Reserving HPET table memory at [mem 0x69bce000-0x69bce037]
[    0.007100] ACPI: Reserving APIC table memory at [mem 0x69bfd000-0x69bfd12b]
[    0.007101] ACPI: Reserving MCFG table memory at [mem 0x69bcc000-0x69bcc03b]
[    0.007101] ACPI: Reserving SSDT table memory at [mem 0x69ba1000-0x69ba2217]
[    0.007101] ACPI: Reserving DMAR table memory at [mem 0x69ba0000-0x69ba009f]
[    0.007102] ACPI: Reserving UEFI table memory at [mem 0x69a9d000-0x69a9d639]
[    0.007102] ACPI: Reserving UEFI table memory at [mem 0x69a9c000-0x69a9c05b]
[    0.007103] ACPI: Reserving SSDT table memory at [mem 0x69b9f000-0x69b9f965]
[    0.007103] ACPI: Reserving SSDT table memory at [mem 0x69b9e000-0x69b9e0f7]
[    0.007103] ACPI: Reserving FPDT table memory at [mem 0x69b9d000-0x69b9d043]
[    0.007104] ACPI: Reserving PTDT table memory at [mem 0x69b9b000-0x69b9bcfd]
[    0.007104] ACPI: Reserving BGRT table memory at [mem 0x69b9c000-0x69b9c037]
[    0.007327] No NUMA configuration found
[    0.007328] Faking a node at [mem 0x0000000000000000-0x000000048b7fffff]
[    0.007329] NODE_DATA(0) allocated [mem 0x48b7fb000-0x48b7fffff]
[    0.007344] Zone ranges:
[    0.007345]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007346]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007347]   Normal   [mem 0x0000000100000000-0x000000048b7fffff]
[    0.007347]   Device   empty
[    0.007348] Movable zone start for each node
[    0.007349] Early memory node ranges
[    0.007349]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.007350]   node   0: [mem 0x0000000000100000-0x000000005df98fff]
[    0.007350]   node   0: [mem 0x000000005e899000-0x00000000674aefff]
[    0.007351]   node   0: [mem 0x0000000069bff000-0x0000000069bfffff]
[    0.007351]   node   0: [mem 0x0000000100000000-0x000000048b7fffff]
[    0.007352] Initmem setup node 0 [mem 0x0000000000001000-0x000000048b7fffff]
[    0.007355] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007368] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009035] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.009085] On node 0, zone DMA32: 10064 pages in unavailable ranges
[    0.025389] On node 0, zone Normal: 25600 pages in unavailable ranges
[    0.025474] On node 0, zone Normal: 18432 pages in unavailable ranges
[    0.025494] Reserving Intel graphics memory at [mem 0x70800000-0x747fffff]
[    0.025874] ACPI: PM-Timer IO Port: 0x1808
[    0.025879] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.025880] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.025880] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.025880] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.025881] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.025881] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.025881] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.025882] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.025882] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.025883] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.025883] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.025883] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.025884] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.025884] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.025884] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.025885] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.025920] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.025922] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.025924] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.025926] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.025927] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.025932] e820: update [mem 0x631a1000-0x63294fff] usable ==> reserved
[    0.025938] TSC deadline timer available
[    0.025938] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.025946] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.025947] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.025948] PM: hibernation: Registered nosave memory: [mem 0x5df99000-0x5e898fff]
[    0.025949] PM: hibernation: Registered nosave memory: [mem 0x631a1000-0x63294fff]
[    0.025949] PM: hibernation: Registered nosave memory: [mem 0x634ab000-0x634abfff]
[    0.025950] PM: hibernation: Registered nosave memory: [mem 0x674af000-0x6787efff]
[    0.025951] PM: hibernation: Registered nosave memory: [mem 0x6787f000-0x692fefff]
[    0.025951] PM: hibernation: Registered nosave memory: [mem 0x692ff000-0x69b2efff]
[    0.025951] PM: hibernation: Registered nosave memory: [mem 0x69b2f000-0x69bfefff]
[    0.025952] PM: hibernation: Registered nosave memory: [mem 0x69c00000-0x6dffffff]
[    0.025953] PM: hibernation: Registered nosave memory: [mem 0x6e000000-0x6e3fffff]
[    0.025953] PM: hibernation: Registered nosave memory: [mem 0x6e400000-0x6e5fffff]
[    0.025953] PM: hibernation: Registered nosave memory: [mem 0x6e600000-0x6effffff]
[    0.025954] PM: hibernation: Registered nosave memory: [mem 0x6f000000-0x747fffff]
[    0.025954] PM: hibernation: Registered nosave memory: [mem 0x74800000-0xfe00ffff]
[    0.025954] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[    0.025955] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff]
[    0.025955] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.025955] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
[    0.025956] [mem 0x74800000-0xfe00ffff] available for PCI devices
[    0.025957] Booting paravirtualized kernel on bare hardware
[    0.025958] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.029726] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.029951] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.029955] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.029956] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.029965] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=b50befde-5daa-4f67-81e7-4fb055a6a727 rw udev.log_priority=3 fbcon=nodefer
[    0.030000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
[    0.030039] random: crng init done
[    0.031172] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.031766] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.031840] Fallback order for Node 0: 0 
[    0.031843] Built 1 zonelists, mobility grouping on.  Total pages: 4072993
[    0.031844] Policy zone: Normal
[    0.032006] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.032016] software IO TLB: area num 8.
[    0.061526] Memory: 16044848K/16551224K available (16384K kernel code, 2138K rwdata, 13036K rodata, 3436K init, 3708K bss, 506116K reserved, 0K cma-reserved)
[    0.061652] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.061670] ftrace: allocating 48951 entries in 192 pages
[    0.066933] ftrace: allocated 192 pages with 2 groups
[    0.067472] Dynamic Preempt: voluntary
[    0.067501] rcu: Preemptible hierarchical RCU implementation.
[    0.067501] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.067502] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.067502] 	Trampoline variant of Tasks RCU enabled.
[    0.067503] 	Rude variant of Tasks RCU enabled.
[    0.067503] 	Tracing variant of Tasks RCU enabled.
[    0.067503] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.067504] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.069033] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.069312] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.069577] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.069599] Console: colour dummy device 80x25
[    0.069600] printk: console [tty0] enabled
[    0.069627] ACPI: Core revision 20230628
[    0.069796] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.069796] APIC: Switch to symmetric I/O mode setup
[    0.069798] DMAR: Host address width 39
[    0.069799] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.069803] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 69e2ff0505e
[    0.069805] DMAR: DRHD base: 0x000000fed84000 flags: 0x0
[    0.069808] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.069809] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.069813] DMAR: dmar2: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.069815] DMAR: RMRR base: 0x00000070000000 end: 0x000000747fffff
[    0.069817] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 2
[    0.069818] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.069818] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.071560] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.071562] x2apic enabled
[    0.071620] APIC: Switched APIC routing to: cluster x2apic
[    0.076059] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns
[    0.076064] Calibrating delay loop (skipped), value calculated using timer frequency.. 5608.00 BogoMIPS (lpj=9344000)
[    0.076088] CPU0: Thermal monitoring enabled (TM1)
[    0.076089] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.076194] process: using mwait in idle threads
[    0.076195] CET detected: Indirect Branch Tracking enabled
[    0.076197] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.076197] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.076200] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.076201] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit
[    0.076202] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall
[    0.076202] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.076203] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.076203] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.076204] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.076204] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.076206] GDS: Mitigation: Microcode
[    0.076211] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.076212] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.076212] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.076213] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.076213] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.076214] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.076214] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.076215] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.076215] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.076216] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.076217] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.076217] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.076218] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.076218] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16
[    0.076219] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format.
[    0.079396] Freeing SMP alternatives memory: 40K
[    0.079396] pid_max: default: 32768 minimum: 301
[    0.079396] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.079396] landlock: Up and running.
[    0.079396] Yama: becoming mindful.
[    0.079396] LSM support for eBPF active
[    0.079396] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.079396] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.079396] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[    0.079396] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.079396] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.079396] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.079396] Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.079396] ... version:                5
[    0.079396] ... bit width:              48
[    0.079396] ... generic registers:      8
[    0.079396] ... value mask:             0000ffffffffffff
[    0.079396] ... max period:             00007fffffffffff
[    0.079396] ... fixed-purpose events:   4
[    0.079396] ... event mask:             0001000f000000ff
[    0.079396] signal: max sigframe size: 3632
[    0.079396] Estimated ratio of average max frequency by base frequency (times 1024): 1499
[    0.079396] rcu: Hierarchical SRCU implementation.
[    0.079396] rcu: 	Max phase no-delay instances is 1000.
[    0.079396] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.079396] smp: Bringing up secondary CPUs ...
[    0.079396] smpboot: x86: Booting SMP configuration:
[    0.079396] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.083741] smp: Brought up 1 node, 8 CPUs
[    0.083741] smpboot: Max logical packages: 1
[    0.083741] smpboot: Total of 8 processors activated (44869.00 BogoMIPS)
[    0.086424] devtmpfs: initialized
[    0.086424] x86/mm: Memory block size: 128MB
[    0.086751] ACPI: PM: Registering ACPI NVS region [mem 0x692ff000-0x69b2efff] (8585216 bytes)
[    0.086751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.086751] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.086751] pinctrl core: initialized pinctrl subsystem
[    0.086751] PM: RTC time: 15:32:44, date: 2024-10-28
[    0.086751] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.086879] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.086984] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.087091] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.087101] audit: initializing netlink subsys (disabled)
[    0.087103] audit: type=2000 audit(1730129564.009:1): state=initialized audit_enabled=0 res=1
[    0.087103] thermal_sys: Registered thermal governor 'fair_share'
[    0.087103] thermal_sys: Registered thermal governor 'bang_bang'
[    0.087103] thermal_sys: Registered thermal governor 'step_wise'
[    0.087103] thermal_sys: Registered thermal governor 'user_space'
[    0.087103] thermal_sys: Registered thermal governor 'power_allocator'
[    0.087135] cpuidle: using governor ladder
[    0.087135] cpuidle: using governor menu
[    0.087135] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.087135] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.087135] PCI: Using configuration type 1 for base access
[    0.087135] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.087135] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.087135] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.087135] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.087135] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.087135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.087135] ACPI: Added _OSI(Module Device)
[    0.087135] ACPI: Added _OSI(Processor Device)
[    0.087135] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.087135] ACPI: Added _OSI(Processor Aggregator Device)
[    0.124752] ACPI: 15 ACPI AML tables successfully acquired and loaded
[    0.126149] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.133060] ACPI: Dynamic OEM Table Load:
[    0.133066] ACPI: SSDT 0xFFFF9574413B9800 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.133754] ACPI: Dynamic OEM Table Load:
[    0.133760] ACPI: SSDT 0xFFFF9574413A8000 000647 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.133784] ACPI: Dynamic OEM Table Load:
[    0.133784] ACPI: SSDT 0xFFFF9574417E6200 0001C6 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.134056] ACPI: Dynamic OEM Table Load:
[    0.134060] ACPI: SSDT 0xFFFF9574413B9400 000266 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.134826] ACPI: Dynamic OEM Table Load:
[    0.134831] ACPI: SSDT 0xFFFF9574413B1000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.135606] ACPI: Dynamic OEM Table Load:
[    0.135610] ACPI: SSDT 0xFFFF9574413A8800 00048A (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.136315] ACPI: Dynamic OEM Table Load:
[    0.136319] ACPI: SSDT 0xFFFF9574413AC800 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.137023] ACPI: Dynamic OEM Table Load:
[    0.137026] ACPI: SSDT 0xFFFF9574413A9000 00048A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.139569] ACPI: _OSC evaluated successfully for all CPUs
[    0.139595] ACPI: EC: EC started
[    0.139595] ACPI: EC: interrupt blocked
[    0.140403] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.140404] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.140405] ACPI: Interpreter enabled
[    0.140444] ACPI: PM: (supports S0 S3 S4 S5)
[    0.140445] ACPI: Using IOAPIC for interrupt routing
[    0.141281] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.141282] PCI: Using E820 reservations for host bridge windows
[    0.141634] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.142101] ACPI: \_SB_.PC00.PEG0.PC01: New power resource
[    0.142115] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TDGC], AE_NOT_FOUND (20230628/psargs-332)
[    0.142121] ACPI Error: Aborting method \_SB.PC00.PEG0.PC01._ON due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
[    0.144409] ACPI: \_SB_.PC00.XHCI.RHUB.HS03.DBTP: New power resource
[    0.145795] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTPR: New power resource
[    0.151400] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
[    0.151484] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
[    0.151563] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
[    0.153918] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.154583] ACPI: \_SB_.PC00.VMD0.VOL0.V0PR: New power resource
[    0.154619] ACPI: \_SB_.PC00.VMD0.VOL1.V1PR: New power resource
[    0.154653] ACPI: \_SB_.PC00.VMD0.VOL2.V2PR: New power resource
[    0.154688] ACPI: \_SB_.PC00.VMD0.VOL3.V3PR: New power resource
[    0.154747] ACPI: \_SB_.PC00.TBT0: New power resource
[    0.154785] ACPI: \_SB_.PC00.TBT1: New power resource
[    0.154820] ACPI: \_SB_.PC00.D3C_: New power resource
[    0.284482] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.284487] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.286085] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.289227] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[    0.292219] PCI host bridge to bus 0000:00
[    0.292220] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.292222] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.292223] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.292224] pci_bus 0000:00: root bus resource [mem 0x74800000-0xbfffffff window]
[    0.292224] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.292225] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.292252] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000
[    0.292356] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000
[    0.292363] pci 0000:00:02.0: reg 0x10: [mem 0x601e000000-0x601effffff 64bit]
[    0.292368] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.292372] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.292385] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.292386] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.292388] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.292411] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[    0.292412] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[    0.292416] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[    0.292417] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[    0.292541] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
[    0.292559] pci 0000:00:04.0: reg 0x10: [mem 0x601f240000-0x601f25ffff 64bit]
[    0.292811] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400
[    0.292854] pci 0000:00:07.0: Overriding RP PIO Log Size to 4
[    0.292909] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.293551] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000
[    0.293558] pci 0000:00:08.0: reg 0x10: [mem 0x601f28d000-0x601f28dfff 64bit]
[    0.293634] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000
[    0.293641] pci 0000:00:0a.0: reg 0x10: [mem 0x601f270000-0x601f277fff 64bit]
[    0.293661] pci 0000:00:0a.0: enabling Extended Tags
[    0.293740] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330
[    0.293752] pci 0000:00:0d.0: reg 0x10: [mem 0x601f260000-0x601f26ffff 64bit]
[    0.293804] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[    0.294103] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340
[    0.294114] pci 0000:00:0d.2: reg 0x10: [mem 0x601f200000-0x601f23ffff 64bit]
[    0.294121] pci 0000:00:0d.2: reg 0x18: [mem 0x601f28c000-0x601f28cfff 64bit]
[    0.294154] pci 0000:00:0d.2: supports D1 D2
[    0.294154] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.294280] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
[    0.294290] pci 0000:00:0e.0: reg 0x10: [mem 0x601c000000-0x601dffffff 64bit]
[    0.294296] pci 0000:00:0e.0: reg 0x18: [mem 0x76000000-0x77ffffff]
[    0.294308] pci 0000:00:0e.0: reg 0x20: [mem 0x601f100000-0x601f1fffff 64bit]
[    0.294512] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[    0.294532] pci 0000:00:14.0: reg 0x10: [mem 0x84300000-0x8430ffff 64bit]
[    0.294616] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.294939] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[    0.294961] pci 0000:00:14.2: reg 0x10: [mem 0x601f280000-0x601f283fff 64bit]
[    0.294976] pci 0000:00:14.2: reg 0x18: [mem 0x601f28b000-0x601f28bfff 64bit]
[    0.295121] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
[    0.295144] pci 0000:00:14.3: reg 0x10: [mem 0x601f27c000-0x601f27ffff 64bit]
[    0.295277] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.295527] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[    0.295554] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.295947] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000
[    0.295974] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.296408] pci 0000:00:15.2: [8086:a0ea] type 00 class 0x0c8000
[    0.296438] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.296888] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000
[    0.296918] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.297251] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[    0.297274] pci 0000:00:16.0: reg 0x10: [mem 0x601f286000-0x601f286fff 64bit]
[    0.297358] pci 0000:00:16.0: PME# supported from D3hot
[    0.297666] pci 0000:00:17.0: [8086:09ab] type 00 class 0x088000
[    0.298210] pci 0000:00:19.0: [8086:a0c5] type 00 class 0x0c8000
[    0.298238] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.298584] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400
[    0.298685] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.298721] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.299231] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[    0.299521] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[    0.299564] pci 0000:00:1f.3: reg 0x10: [mem 0x601f278000-0x601f27bfff 64bit]
[    0.299618] pci 0000:00:1f.3: reg 0x20: [mem 0x601f000000-0x601f0fffff 64bit]
[    0.299723] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.300051] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[    0.300075] pci 0000:00:1f.4: reg 0x10: [mem 0x601f284000-0x601f2840ff 64bit]
[    0.300105] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.300300] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[    0.300318] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.300455] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
[    0.300459] pci 0000:00:07.0:   bridge window [mem 0x78000000-0x841fffff]
[    0.300463] pci 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    0.300522] pci 0000:2b:00.0: [10ec:8168] type 00 class 0x020000
[    0.300541] pci 0000:2b:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.300565] pci 0000:2b:00.0: reg 0x18: [mem 0x84204000-0x84204fff 64bit]
[    0.300580] pci 0000:2b:00.0: reg 0x20: [mem 0x84200000-0x84203fff 64bit]
[    0.300698] pci 0000:2b:00.0: supports D1 D2
[    0.300699] pci 0000:2b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.300915] pci 0000:00:1d.0: PCI bridge to [bus 2b]
[    0.300917] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.300920] pci 0000:00:1d.0:   bridge window [mem 0x84200000-0x842fffff]
[    0.310513] Low-power S0 idle used by default for system suspend
[    0.311249] ACPI: EC: interrupt unblocked
[    0.311250] ACPI: EC: event unblocked
[    0.312735] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.312735] ACPI: EC: GPE=0x6e
[    0.312735] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.312735] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    0.312741] iommu: Default domain type: Translated
[    0.312741] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.312821] SCSI subsystem initialized
[    0.312824] libata version 3.00 loaded.
[    0.312824] ACPI: bus type USB registered
[    0.312824] usbcore: registered new interface driver usbfs
[    0.312824] usbcore: registered new interface driver hub
[    0.312824] usbcore: registered new device driver usb
[    0.312824] pps_core: LinuxPPS API ver. 1 registered
[    0.312824] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312824] PTP clock support registered
[    0.312824] EDAC MC: Ver: 3.0.0
[    0.313605] efivars: Registered efivars operations
[    0.313609] NetLabel: Initializing
[    0.313609] NetLabel:  domain hash size = 128
[    0.313609] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.313609] NetLabel:  unlabeled traffic allowed by default
[    0.313609] mctp: management component transport protocol core
[    0.313609] NET: Registered PF_MCTP protocol family
[    0.313609] PCI: Using ACPI for IRQ routing
[    0.330414] PCI: pci_cache_line_size set to 64 bytes
[    0.330565] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.330704] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.330706] e820: reserve RAM buffer [mem 0x5df99000-0x5fffffff]
[    0.330706] e820: reserve RAM buffer [mem 0x631a1000-0x63ffffff]
[    0.330707] e820: reserve RAM buffer [mem 0x634ab000-0x63ffffff]
[    0.330707] e820: reserve RAM buffer [mem 0x674af000-0x67ffffff]
[    0.330708] e820: reserve RAM buffer [mem 0x69c00000-0x6bffffff]
[    0.330709] e820: reserve RAM buffer [mem 0x48b800000-0x48bffffff]
[    0.332761] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.332761] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.332761] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.332761] vgaarb: loaded
[    0.333804] clocksource: Switched to clocksource tsc-early
[    0.333804] VFS: Disk quotas dquot_6.6.0
[    0.333804] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.333804] pnp: PnP ACPI init
[    0.333804] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.333804] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.333804] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.333804] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.333812] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.333813] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.333814] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.333815] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.333816] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.333817] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.333818] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.334356] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.334357] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.334358] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved
[    0.334359] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved
[    0.334360] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[    0.334361] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.334363] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.334364] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.334365] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.334366] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.334602] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.334931] pnp: PnP ACPI: found 8 devices
[    0.340195] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.340230] NET: Registered PF_INET protocol family
[    0.340362] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.342128] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.342148] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.342206] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.342392] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.342537] TCP: Hash tables configured (established 131072 bind 65536)
[    0.342597] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.342625] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.342653] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.342687] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.342691] NET: Registered PF_XDP protocol family
[    0.342694] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
[    0.342702] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[    0.342704] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[    0.342706] pci 0000:00:07.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.342707] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[    0.342767] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[    0.342781] pci 0000:00:15.2: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[    0.342796] pci 0000:00:15.3: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
[    0.342810] pci 0000:00:19.0: BAR 0: assigned [mem 0x4017004000-0x4017004fff 64bit]
[    0.342870] resource: avoiding allocation from e820 entry [mem 0x0009f000-0x000fffff]
[    0.342871] pci 0000:00:1f.5: BAR 0: assigned [mem 0x74800000-0x74800fff]
[    0.342882] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
[    0.342884] pci 0000:00:07.0:   bridge window [io  0x5000-0x5fff]
[    0.342887] pci 0000:00:07.0:   bridge window [mem 0x78000000-0x841fffff]
[    0.342889] pci 0000:00:07.0:   bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
[    0.342893] pci 0000:00:1d.0: PCI bridge to [bus 2b]
[    0.342897] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.342900] pci 0000:00:1d.0:   bridge window [mem 0x84200000-0x842fffff]
[    0.342907] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.342908] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.342909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.342909] pci_bus 0000:00: resource 7 [mem 0x74800000-0xbfffffff window]
[    0.342910] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.342911] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.342912] pci_bus 0000:01: resource 1 [mem 0x78000000-0x841fffff]
[    0.342912] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref]
[    0.342913] pci_bus 0000:2b: resource 0 [io  0x3000-0x3fff]
[    0.342914] pci_bus 0000:2b: resource 1 [mem 0x84200000-0x842fffff]
[    0.345454] PCI: CLS 64 bytes, default 64
[    0.345483] DMAR: Intel-IOMMU force enabled due to platform opt in
[    0.345488] DMAR: No ATSR found
[    0.345489] DMAR: No SATC found
[    0.345490] DMAR: IOMMU feature fl1gp_support inconsistent
[    0.345490] DMAR: IOMMU feature pgsel_inv inconsistent
[    0.345491] DMAR: IOMMU feature nwfs inconsistent
[    0.345491] DMAR: IOMMU feature pds inconsistent
[    0.345491] DMAR: IOMMU feature dit inconsistent
[    0.345492] DMAR: IOMMU feature eafs inconsistent
[    0.345492] DMAR: IOMMU feature prs inconsistent
[    0.345493] DMAR: IOMMU feature nest inconsistent
[    0.345493] DMAR: IOMMU feature mts inconsistent
[    0.345493] DMAR: IOMMU feature sc_support inconsistent
[    0.345494] DMAR: IOMMU feature dev_iotlb_support inconsistent
[    0.345494] DMAR: dmar1: Using Queued invalidation
[    0.345496] DMAR: dmar0: Using Queued invalidation
[    0.345498] DMAR: dmar2: Using Queued invalidation
[    0.345615] Trying to unpack rootfs image as initramfs...
[    0.345840] pci 0000:00:07.0: Adding to iommu group 0
[    0.345860] pci 0000:00:02.0: Adding to iommu group 1
[    0.345878] pci 0000:00:00.0: Adding to iommu group 2
[    0.345884] pci 0000:00:04.0: Adding to iommu group 3
[    0.345890] pci 0000:00:08.0: Adding to iommu group 4
[    0.345896] pci 0000:00:0a.0: Adding to iommu group 5
[    0.345907] pci 0000:00:0d.0: Adding to iommu group 6
[    0.345913] pci 0000:00:0d.2: Adding to iommu group 6
[    0.345920] pci 0000:00:0e.0: Adding to iommu group 7
[    0.345931] pci 0000:00:14.0: Adding to iommu group 8
[    0.345938] pci 0000:00:14.2: Adding to iommu group 8
[    0.345946] pci 0000:00:14.3: Adding to iommu group 9
[    0.345962] pci 0000:00:15.0: Adding to iommu group 10
[    0.345972] pci 0000:00:15.1: Adding to iommu group 10
[    0.345978] pci 0000:00:15.2: Adding to iommu group 10
[    0.345983] pci 0000:00:15.3: Adding to iommu group 10
[    0.345991] pci 0000:00:16.0: Adding to iommu group 11
[    0.346000] pci 0000:00:17.0: Adding to iommu group 12
[    0.346008] pci 0000:00:19.0: Adding to iommu group 13
[    0.346017] pci 0000:00:1d.0: Adding to iommu group 14
[    0.346032] pci 0000:00:1f.0: Adding to iommu group 15
[    0.346039] pci 0000:00:1f.3: Adding to iommu group 15
[    0.346046] pci 0000:00:1f.4: Adding to iommu group 15
[    0.346053] pci 0000:00:1f.5: Adding to iommu group 15
[    0.346062] pci 0000:2b:00.0: Adding to iommu group 16
[    0.346157] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.346158] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.346159] software IO TLB: mapped [mem 0x00000000585fe000-0x000000005c5fe000] (64MB)
[    0.346180] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns
[    0.346212] clocksource: Switched to clocksource tsc
[    0.353960] Initialise system trusted keyrings
[    0.353968] Key type blacklist registered
[    0.354014] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.354018] zbud: loaded
[    0.354104] integrity: Platform Keyring initialized
[    0.354106] integrity: Machine keyring initialized
[    0.358713] Key type asymmetric registered
[    0.358714] Asymmetric key parser 'x509' registered
[    0.358723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.358775] io scheduler mq-deadline registered
[    0.358776] io scheduler kyber registered
[    0.358780] io scheduler bfq registered
[    0.360720] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
[    0.360735] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.361069] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[    0.361159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.361364] Monitor-Mwait will be used to enter C-1 state
[    0.361380] Monitor-Mwait will be used to enter C-2 state
[    0.361385] Monitor-Mwait will be used to enter C-3 state
[    0.361387] ACPI: \_SB_.PR00: Found 3 idle states
[    0.362612] ACPI: AC: AC Adapter [ACAD] (off-line)
[    0.362642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.362652] ACPI: button: Power Button [PWRB]
[    0.362663] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.362670] ACPI: button: Sleep Button [SLPB]
[    0.362682] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.362689] ACPI: button: Lid Switch [LID0]
[    0.362701] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.362877] ACPI: button: Power Button [PWRF]
[    0.365409] thermal LNXTHERM:00: registered as thermal_zone0
[    0.365411] ACPI: thermal: Thermal Zone [TZ01] (52 C)
[    0.365669] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.366383] ACPI: battery: Slot [BAT1] (battery present)
[    0.367060] hpet_acpi_add: no address or irqs in _CRS
[    0.367088] Non-volatile memory driver v1.3
[    0.367089] Linux agpgart interface v0.103
[    0.369080] tpm_tis NTC0702:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[    0.381093] tpm tpm0: tpm_read_log_acpi: Failed to map ACPI memory
[    0.384659] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.384825] ACPI: bus type drm_connector registered
[    0.385536] usbcore: registered new interface driver usbserial_generic
[    0.385539] usbserial: USB Serial support registered for generic
[    0.385803] rtc_cmos 00:01: RTC can wake from S4
[    0.386726] rtc_cmos 00:01: registered as rtc0
[    0.386897] rtc_cmos 00:01: setting system clock to 2024-10-28T15:32:45 UTC (1730129565)
[    0.386920] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.387391] Freeing initrd memory: 21920K
[    0.387422] intel_pstate: Intel P-state driver initializing
[    0.387991] intel_pstate: HWP enabled
[    0.388027] ledtrig-cpu: registered to indicate activity on CPUs
[    0.388215] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.392518] Console: switching to colour frame buffer device 240x67
[    0.396723] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.396794] hid: raw HID events driver (C) Jiri Kosina
[    0.396967] intel_pmc_core INT33A1:00:  initialized
[    0.397082] drop_monitor: Initializing network drop monitor service
[    0.405005] Initializing XFRM netlink socket
[    0.405025] NET: Registered PF_INET6 protocol family
[    0.409020] Segment Routing with IPv6
[    0.409022] RPL Segment Routing with IPv6
[    0.409028] In-situ OAM (IOAM) with IPv6
[    0.409047] NET: Registered PF_PACKET protocol family
[    0.409632] microcode: Microcode Update Driver: v2.2.
[    0.409684] resctrl: L2 allocation detected
[    0.409689] IPI shorthand broadcast: enabled
[    0.410885] sched_clock: Marking stable (403335152, 6577780)->(434774192, -24861260)
[    0.411057] registered taskstats version 1
[    0.411184] Loading compiled-in X.509 certificates
[    0.413721] Loaded X.509 cert 'Build time autogenerated kernel key: 56a1cd2e4c5ba9d89ec534ba473a99dfb5c91bfd'
[    0.415217] zswap: loaded using pool zstd/zsmalloc
[    0.416449] Key type .fscrypt registered
[    0.416450] Key type fscrypt-provisioning registered
[    0.419757] integrity: Loading X.509 certificate: UEFI:db
[    0.419798] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.419799] integrity: Loading X.509 certificate: UEFI:db
[    0.419811] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.419811] integrity: Loading X.509 certificate: UEFI:db
[    0.419818] integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5'
[    0.419818] integrity: Loading X.509 certificate: UEFI:db
[    0.420163] integrity: Loaded X.509 cert 'LINPUS: 967f81f2f4f5ac0f24fca5e42982e4ad1e56ddff'
[    0.420165] integrity: Loading X.509 certificate: UEFI:db
[    0.420505] integrity: Loaded X.509 cert 'Linpus: linpus.com: 2e092cab5e97a89f94a6e272ec7267c267cf4483'
[    0.420506] integrity: Loading X.509 certificate: UEFI:db
[    0.420622] integrity: Loaded X.509 cert 'Quanta NB4: 073d6a4c306ea5b9499e861c7ba55cde'
[    0.426920] PM:   Magic number: 12:199:539
[    0.426929] tty ttyS19: hash matches
[    0.426931] port serial8250:0.18: hash matches
[    0.428899] RAS: Correctable Errors collector initialized.
[    0.428938] clk: Disabling unused clocks
[    0.437595] Freeing unused decrypted memory: 2028K
[    0.437930] Freeing unused kernel image (initmem) memory: 3436K
[    0.437931] Write protecting the kernel read-only data: 30720k
[    0.438333] Freeing unused kernel image (rodata/data gap) memory: 1300K
[    0.444081] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.444084] rodata_test: all tests were successful
[    0.444184] Run /init as init process
[    0.444185]   with arguments:
[    0.444186]     /init
[    0.444187]   with environment:
[    0.444187]     HOME=/
[    0.444187]     TERM=linux
[    0.444188]     BOOT_IMAGE=/boot/vmlinuz-linux-lts
[    0.662174] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.662177] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.664126] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.664795] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.664798] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.664801] pci_bus 10000:e0: root bus resource [mem 0x76000000-0x77ffffff]
[    0.664803] pci_bus 10000:e0: root bus resource [mem 0x601f102000-0x601f1fffff 64bit]
[    0.664836] pci 10000:e0:17.0: [8086:a0d3] type 00 class 0x010601
[    0.664858] pci 10000:e0:17.0: reg 0x10: [mem 0x00000000-0x00001fff]
[    0.664870] pci 10000:e0:17.0: reg 0x14: [mem 0x00000000-0x000000ff]
[    0.664883] pci 10000:e0:17.0: reg 0x18: [io  0x0000-0x0007]
[    0.664895] pci 10000:e0:17.0: reg 0x1c: [io  0x0000-0x0003]
[    0.664907] pci 10000:e0:17.0: reg 0x20: [io  0x0000-0x001f]
[    0.664919] pci 10000:e0:17.0: reg 0x24: [mem 0x76000000-0x760007ff]
[    0.664965] pci 10000:e0:17.0: PME# supported from D3hot
[    0.665015] pci 10000:e0:17.0: Adding to iommu group 7
[    0.665035] pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000
[    0.665103] pci 10000:e0:1c.0: Adding to iommu group 7
[    0.665138] pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400
[    0.665252] pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
[    0.665255] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    0.665265] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[    0.665292] pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
[    0.665394] pci 10000:e0:1c.4: Adding to iommu group 7
[    0.665403] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.665463] pci 10000:e1:00.0: [1cc1:5766] type 00 class 0x010802
[    0.665497] pci 10000:e1:00.0: reg 0x10: [mem 0x76100000-0x76103fff 64bit]
[    0.665554] pci 10000:e1:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
[    0.665858] pci 10000:e1:00.0: Adding to iommu group 7
[    0.665906] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.665909] pci 10000:e0:1c.4:   bridge window [io  0x0000-0x0fff]
[    0.665913] pci 10000:e0:1c.4:   bridge window [mem 0x76100000-0x761fffff]
[    0.665920] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.666342] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.666577] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    0.666584] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[    0.666587] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.666623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.666625] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.666627] usb usb1: Product: xHCI Host Controller
[    0.666628] usb usb1: Manufacturer: Linux 6.6.58-1-lts xhci-hcd
[    0.666630] usb usb1: SerialNumber: 0000:00:0d.0
[    0.666771] hub 1-0:1.0: USB hub found
[    0.666779] hub 1-0:1.0: 1 port detected
[    0.666876] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.666878] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.666880] usb usb2: Product: xHCI Host Controller
[    0.666881] usb usb2: Manufacturer: Linux 6.6.58-1-lts xhci-hcd
[    0.666882] usb usb2: SerialNumber: 0000:00:0d.0
[    0.666953] hub 2-0:1.0: USB hub found
[    0.666963] hub 2-0:1.0: 4 ports detected
[    0.668617] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.668623] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.669715] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.669961] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.669964] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.669967] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.669999] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.670002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.670004] usb usb3: Product: xHCI Host Controller
[    0.670005] usb usb3: Manufacturer: Linux 6.6.58-1-lts xhci-hcd
[    0.670006] usb usb3: SerialNumber: 0000:00:14.0
[    0.670130] hub 3-0:1.0: USB hub found
[    0.670149] hub 3-0:1.0: 12 ports detected
[    0.672517] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.672521] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.672522] usb usb4: Product: xHCI Host Controller
[    0.672524] usb usb4: Manufacturer: Linux 6.6.58-1-lts xhci-hcd
[    0.672525] usb usb4: SerialNumber: 0000:00:14.0
[    0.672603] hub 4-0:1.0: USB hub found
[    0.672614] hub 4-0:1.0: 4 ports detected
[    0.684175] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.846864] pci 10000:e0:1c.4: BAR 14: assigned [mem 0x76000000-0x760fffff]
[    0.846874] pci 10000:e0:17.0: BAR 0: assigned [mem 0x76100000-0x76101fff]
[    0.846883] pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
[    0.846887] pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
[    0.846889] pci 10000:e0:17.0: BAR 5: assigned [mem 0x76102000-0x761027ff]
[    0.846896] pci 10000:e0:17.0: BAR 1: assigned [mem 0x76102800-0x761028ff]
[    0.846901] pci 10000:e0:17.0: BAR 4: no space for [io  size 0x0020]
[    0.846904] pci 10000:e0:17.0: BAR 4: failed to assign [io  size 0x0020]
[    0.846906] pci 10000:e0:17.0: BAR 2: no space for [io  size 0x0008]
[    0.846908] pci 10000:e0:17.0: BAR 2: failed to assign [io  size 0x0008]
[    0.846910] pci 10000:e0:17.0: BAR 3: no space for [io  size 0x0004]
[    0.846912] pci 10000:e0:17.0: BAR 3: failed to assign [io  size 0x0004]
[    0.846918] pci 10000:e1:00.0: BAR 0: assigned [mem 0x76000000-0x76003fff 64bit]
[    0.846938] pci 10000:e1:00.0: BAR 5: assigned [mem 0x76004000-0x76005fff]
[    0.846946] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.846953] pci 10000:e0:1c.4:   bridge window [mem 0x76000000-0x760fffff]
[    0.847017] pci 10000:e1:00.0: VMD: Default LTR value set by driver
[    0.847063] ahci 10000:e0:17.0: version 3.0
[    0.847073] ahci 10000:e0:17.0: can't derive routing for PCI INT A
[    0.847076] ahci 10000:e0:17.0: PCI INT A: no GSI
[    0.847236] ahci 10000:e0:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.847242] ahci 10000:e0:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
[    0.847649] scsi host0: ahci
[    0.847769] ata1: SATA max UDMA/133 abar m2048@0x76102000 port 0x76102100 irq 146
[    0.847831] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.847834] pcieport 10000:e0:1c.4: PCI INT A: no GSI
[    0.847955] pcieport 10000:e0:1c.4: PME: Signaling with IRQ 147
[    0.848098] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    0.923432] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.064038] usb 3-1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    1.064046] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.064049] usb 3-1: Product: USB2.0-CRW
[    1.064051] usb 3-1: Manufacturer: Generic
[    1.064053] usb 3-1: SerialNumber: 20100201396000000
[    1.077026] usbcore: registered new interface driver rtsx_usb
[    1.161656] ata1: SATA link down (SStatus 0 SControl 300)
[    1.181271] nvme nvme0: pci function 10000:e1:00.0
[    1.181284] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    1.181285] nvme 10000:e1:00.0: PCI INT A: no GSI
[    1.186635] usb 3-4: new low-speed USB device number 3 using xhci_hcd
[    1.330583] nvme nvme0: allocated 64 MiB host memory buffer.
[    1.331031] usb 3-4: New USB device found, idVendor=03f0, idProduct=6a41, bcdDevice= 1.00
[    1.331039] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.331042] usb 3-4: Product: HP USB Optical Mouse
[    1.331044] usb 3-4: Manufacturer: PixArt
[    1.347126] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:03F0:6A41.0001/input/input5
[    1.347398] hid-generic 0003:03F0:6A41.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-4/input0
[    1.347445] usbcore: registered new interface driver usbhid
[    1.347448] usbhid: USB HID core driver
[    1.365622] nvme nvme0: 8/0/0 default/read/poll queues
[    1.403330]  nvme0n1: p1 p2 p3 p4 p5 p6
[    1.456633] usb 3-5: new high-speed USB device number 4 using xhci_hcd
[    1.612924] usb 3-5: New USB device found, idVendor=0408, idProduct=a061, bcdDevice= 0.04
[    1.612931] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.612934] usb 3-5: Product: HD User Facing
[    1.612936] usb 3-5: Manufacturer: SunplusIT Inc
[    1.721779] EXT4-fs (nvme0n1p4): mounted filesystem b50befde-5daa-4f67-81e7-4fb055a6a727 r/w with ordered data mode. Quota mode: none.
[    1.743286] usb 3-8: new low-speed USB device number 5 using xhci_hcd
[    1.840218] systemd[1]: systemd 256.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    1.840228] systemd[1]: Detected architecture x86-64.
[    1.881261] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[    1.893319] usb 3-8: New USB device found, idVendor=03f0, idProduct=6941, bcdDevice= 1.01
[    1.893324] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.893327] usb 3-8: Product: HP Wired Keyboard
[    1.893329] usb 3-8: Manufacturer: SIGMACHIP
[    1.897558] input: SIGMACHIP HP Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/0003:03F0:6941.0002/input/input6
[    2.023777] hid-generic 0003:03F0:6941.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP HP Wired Keyboard] on usb-0000:00:14.0-8/input0
[    2.027008] input: SIGMACHIP HP Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/0003:03F0:6941.0003/input/input7
[    2.083654] input: SIGMACHIP HP Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/0003:03F0:6941.0003/input/input8
[    2.083937] hid-generic 0003:03F0:6941.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP HP Wired Keyboard] on usb-0000:00:14.0-8/input1
[    2.206744] usb 3-9: new full-speed USB device number 6 using xhci_hcd
[    2.349987] usb 3-9: New USB device found, idVendor=3554, idProduct=fc03, bcdDevice= 7.90
[    2.349995] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.349997] usb 3-9: Product: 2.4G Receiver
[    2.350000] usb 3-9: Manufacturer: CX
[    2.354145] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:3554:FC03.0004/input/input9
[    2.470477] hid-generic 0003:3554:FC03.0004: input,hidraw3: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:14.0-9/input0
[    2.473881] input: CX 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:3554:FC03.0005/input/input10
[    2.474121] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:3554:FC03.0005/input/input11
[    2.474352] input: CX 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:3554:FC03.0005/input/input12
[    2.490202] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    2.530320] input: CX 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:3554:FC03.0005/input/input13
[    2.530543] hid-generic 0003:3554:FC03.0005: input,hiddev96,hidraw4: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:14.0-9/input1
[    2.653354] usb 3-10: new full-speed USB device number 7 using xhci_hcd
[    2.700736] systemd-ssh-generator[291]: Binding SSH to AF_UNIX socket /run/ssh-unix-local/socket.
[    2.700739] systemd-ssh-generator[291]: → connect via 'ssh .host' locally
[    2.795755] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    2.795760] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.796257] systemd[1]: Queued start job for default target Graphical Interface.
[    2.826384] systemd[1]: Created slice Virtual Machine and Container Slice.
[    2.827985] systemd[1]: Created slice CUPS Slice.
[    2.828661] systemd[1]: Created slice Slice /system/dirmngr.
[    2.829320] systemd[1]: Created slice Slice /system/getty.
[    2.830059] systemd[1]: Created slice Slice /system/gpg-agent.
[    2.830750] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    2.831382] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    2.832010] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    2.832617] systemd[1]: Created slice Slice /system/keyboxd.
[    2.833185] systemd[1]: Created slice Slice /system/modprobe.
[    2.833756] systemd[1]: Created slice Slice /system/systemd-fsck.
[    2.834146] systemd[1]: Created slice User and Session Slice.
[    2.834240] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.834466] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.834508] systemd[1]: Expecting device /dev/disk/by-uuid/34B2CD28B2CCEF82...
[    2.834531] systemd[1]: Expecting device /dev/disk/by-uuid/E290-26CF...
[    2.834562] systemd[1]: Reached target Login Prompts.
[    2.834593] systemd[1]: Reached target Local Integrity Protected Volumes.
[    2.834640] systemd[1]: Reached target Remote File Systems.
[    2.834842] systemd[1]: Reached target Slice Units.
[    2.834929] systemd[1]: Reached target Swaps.
[    2.834992] systemd[1]: Reached target Local Verity Protected Volumes.
[    2.835185] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.835358] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.836947] systemd[1]: Listening on Process Core Dump Socket.
[    2.837769] systemd[1]: Listening on Credential Encryption/Decryption.
[    2.837867] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.837947] systemd[1]: Listening on Journal Sockets.
[    2.837998] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    2.838017] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    2.838089] systemd[1]: Listening on udev Control Socket.
[    2.838152] systemd[1]: Listening on udev Kernel Socket.
[    2.839273] systemd[1]: Mounting Huge Pages File System...
[    2.840322] systemd[1]: Mounting POSIX Message Queue File System...
[    2.841323] systemd[1]: Mounting Kernel Debug File System...
[    2.842264] systemd[1]: Mounting Kernel Trace File System...
[    2.844012] systemd[1]: Starting Create List of Static Device Nodes...
[    2.845255] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.846302] systemd[1]: Starting Load Kernel Module configfs...
[    2.847366] systemd[1]: Starting Load Kernel Module dm_mod...
[    2.848180] systemd[1]: Starting Load Kernel Module drm...
[    2.848922] systemd[1]: Starting Load Kernel Module fuse...
[    2.849543] systemd[1]: Starting Load Kernel Module loop...
[    2.849656] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    2.849701] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    2.850934] systemd[1]: Starting Load Kernel Modules...
[    2.850960] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    2.851598] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.851694] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    2.852542] systemd[1]: Starting Load udev Rules from Credentials...
[    2.854756] systemd[1]: Starting Coldplug All udev Devices...
[    2.855786] systemd[1]: Starting Virtual Console Setup...
[    2.858114] systemd[1]: Mounted Huge Pages File System.
[    2.858233] systemd[1]: Mounted POSIX Message Queue File System.
[    2.858311] systemd[1]: Mounted Kernel Debug File System.
[    2.858413] systemd[1]: Mounted Kernel Trace File System.
[    2.864928] loop: module loaded
[    2.865025] device-mapper: uevent: version 1.0.3
[    2.865093] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.866252] fuse: init (API version 7.39)
[    2.868882] i2c_dev: i2c /dev entries driver
[    2.887064] EXT4-fs (nvme0n1p4): re-mounted b50befde-5daa-4f67-81e7-4fb055a6a727 r/w. Quota mode: none.
[    2.887118] systemd[1]: Finished Create List of Static Device Nodes.
[    2.888309] vboxdrv: loading out-of-tree module taints kernel.
[    2.888312] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    2.888636] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    2.894396] vboxdrv: Found 8 processor cores/threads
[    2.913863] systemd[1]: Finished Load Kernel Module configfs.
[    2.914119] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    2.917396] vboxdrv: TSC mode is Invariant, tentative frequency 2803189796 Hz
[    2.917407] vboxdrv: Successfully loaded version 7.1.4 r165100 (interface 0x00340001)
[    2.919277] VBoxNetAdp: Successfully started.
[    2.921238] VBoxNetFlt: Successfully started.
[    2.943611] systemd[1]: Finished Load Kernel Module dm_mod.
[    2.973829] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    2.974309] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.003799] systemd[1]: Finished Load Kernel Module drm.
[    3.004406] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.027758] systemd[1]: Finished Load Kernel Module fuse.
[    3.028264] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    3.053871] systemd[1]: Finished Load Kernel Module loop.
[    3.073901] systemd[1]: Finished Load Kernel Modules.
[    3.093875] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.113947] systemd[1]: Finished Load udev Rules from Credentials.
[    3.137215] systemd[1]: Finished Coldplug All udev Devices.
[    3.167212] systemd[1]: Finished Virtual Console Setup.
[    3.169288] systemd[1]: Mounting FUSE Control File System...
[    3.171110] systemd[1]: Mounting Kernel Configuration File System...
[    3.214986] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    3.216421] systemd[1]: Starting Load/Save OS Random Seed...
[    3.216520] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    3.218563] systemd[1]: Starting Apply Kernel Variables...
[    3.220729] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    3.220819] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    3.222568] systemd[1]: Mounted FUSE Control File System.
[    3.222900] systemd[1]: Mounted Kernel Configuration File System.
[    3.263732] systemd[1]: Finished Load/Save OS Random Seed.
[    3.300533] systemd[1]: Finished Apply Kernel Variables.
[    3.337134] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[    3.337494] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[    3.339024] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.436883] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.437105] systemd[1]: Reached target Preparation for Local File Systems.
[    3.437649] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
[    3.440003] systemd[1]: Starting Journal Service...
[    3.441557] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.536537] systemd-journald[338]: Collecting audit messages is disabled.
[    3.564743] systemd[1]: Started Journal Service.
[    3.614138] systemd-journald[338]: Received client request to flush runtime journal.
[    3.638601] Consider using thermal netlink events interface
[    3.639514] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/10251229:00/input/input15
[    3.667713] EDAC igen6: v2.5.1
[    3.737664] input: PC Speaker as /devices/platform/pcspkr/input/input16
[    3.738045] ACPI: bus type thunderbolt registered
[    3.746547] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.746648] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.746668] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.749004] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    3.750433] i2c i2c-0: Successfully instantiated SPD at 0x50
[    3.752224] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    3.754792] spi-nor spi0.0: w25q128 (16384 Kbytes)
[    3.756547] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.758704] Creating 1 MTD partitions on "0000:00:1f.5":
[    3.758707] 0x000000000000-0x000001000000 : "BIOS"
[    3.760572] mc: Linux media interface: v0.10
[    3.762006] mousedev: PS/2 mouse device common for all mice
[    3.775736] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    3.776196] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.779830] intel_rapl_common: Found RAPL domain package
[    3.796743] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[    3.797140] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    3.797924] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.798128] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.798313] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    3.812104] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
[    3.812107] caller __uncore_imc_init_box+0xfb/0x150 [intel_uncore] mapping multiple BARs
[    3.812514] Bluetooth: Core ver 2.22
[    3.812533] NET: Registered PF_BLUETOOTH protocol family
[    3.812535] Bluetooth: HCI device and connection manager initialized
[    3.812541] Bluetooth: HCI socket layer initialized
[    3.812543] Bluetooth: L2CAP socket layer initialized
[    3.812547] Bluetooth: SCO socket layer initialized
[    3.812585] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[    3.812998] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    3.813704] r8169 0000:2b:00.0: enabling device (0000 -> 0003)
[    3.828966] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[    3.830483] idma64 idma64.4: Found Intel integrated DMA 64-bit
[    3.832676] r8169 0000:2b:00.0 eth0: RTL8168h/8111h, c0:18:50:af:3a:54, XID 541, IRQ 175
[    3.832680] r8169 0000:2b:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    3.849527] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.849530] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.849532] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.849533] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.849534] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.862594] intel_rapl_msr: PL4 support detected.
[    3.863268] intel_rapl_common: Found RAPL domain package
[    3.863271] intel_rapl_common: Found RAPL domain core
[    3.863272] intel_rapl_common: Found RAPL domain uncore
[    3.863274] intel_rapl_common: Found RAPL domain psys
[    3.877537] iTCO_vendor_support: vendor-support=0
[    3.927844] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    3.936701] input: SYNA7DAB:00 06CB:CD40 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0006/input/input17
[    3.936749] input: SYNA7DAB:00 06CB:CD40 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0006/input/input18
[    3.936801] hid-generic 0018:06CB:CD40.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA7DAB:00 06CB:CD40] on i2c-SYNA7DAB:00
[    3.951127] cryptd: max_cpu_qlen set to 1000
[    3.954257] acer_wmi: Acer Laptop ACPI-WMI Extras
[    3.954280] acer_wmi: Function bitmap for Communication Button: 0x801
[    3.974069] input: Acer WMI hotkeys as /devices/virtual/input/input20
[    3.987571] r8169 0000:2b:00.0 enp43s0: renamed from eth0
[    4.001390] iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    4.012510] videodev: Linux video capture interface: v2.00
[    4.022938] AVX2 version of gcm_enc/dec engaged.
[    4.022971] AES CTR mode by8 optimization enabled
[    4.045727] usbcore: registered new interface driver btusb
[    4.046779] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[    4.047775] Bluetooth: hci0: Device revision is 2
[    4.047776] Bluetooth: hci0: Secure boot is enabled
[    4.047777] Bluetooth: hci0: OTP lock is enabled
[    4.047778] Bluetooth: hci0: API lock is enabled
[    4.047778] Bluetooth: hci0: Debug lock is disabled
[    4.047779] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    4.063271] Intel(R) Wireless WiFi driver for Linux
[    4.064617] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
[    4.064638] iwlwifi 0000:00:14.3: PCI dev a0f0/0074, rev=0x351, rfid=0x10a100
[    4.071685] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[    4.071701] Bluetooth: hci0: Boot Address: 0x24800
[    4.071702] Bluetooth: hci0: Firmware Version: 132-3.24
[    4.075384] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    4.075525] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.078184] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    4.078194] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    4.078381] iwlwifi 0000:00:14.3: loaded firmware version 77.0b4c06ad.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
[    4.086165] usb 3-5: Found UVC 1.00 device HD User Facing (0408:a061)
[    4.103343] usbcore: registered new interface driver uvcvideo
[    4.225541] input: SYNA7DAB:00 06CB:CD40 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0006/input/input21
[    4.225624] input: SYNA7DAB:00 06CB:CD40 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA7DAB:00/0018:06CB:CD40.0006/input/input22
[    4.225675] hid-multitouch 0018:06CB:CD40.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA7DAB:00 06CB:CD40] on i2c-SYNA7DAB:00
[    4.299139] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    4.313354] Console: switching to colour dummy device 80x25
[    4.348786] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[    4.348912] thermal thermal_zone6: failed to read out thermal zone (-61)
[    4.357405] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.357541] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    4.359679] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.360513] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[    4.361497] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[    4.374935] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
[    4.375055] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[    4.383289] intel_tcc_cooling: Programmable TCC Offset detected
[    4.471236] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    4.537262] iwlwifi 0000:00:14.3: base HW address: 58:ce:2a:9f:23:f6
[    4.537450] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000002) is beyond end of object (length 0x2) (20230628/exoparg2-393)
[    4.537459] ACPI Error: Aborting method \_SB.PC00.CNVW.WRDD due to previous error (AE_AML_PACKAGE_LIMIT) (20230628/psparse-529)
[    4.589196] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[    4.726613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.726615] Bluetooth: BNEP filters: protocol multicast
[    4.726618] Bluetooth: BNEP socket layer initialized
[    4.984851] NET: Registered PF_QIPCRTR protocol family
[    5.023314] Generic FE-GE Realtek PHY r8169-0-2b00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2b00:00, irq=MAC)
[    5.213510] r8169 0000:2b:00.0 enp43s0: Link is Down
[    5.401662] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    5.532346] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
[    5.584388] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.584601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24
[    5.584883] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.586792] fbcon: i915drmfb (fb0) is primary device
[    5.801217] Bluetooth: hci0: Waiting for firmware download to complete
[    5.801774] Bluetooth: hci0: Firmware loaded in 1689536 usecs
[    5.801819] Bluetooth: hci0: Waiting for device to boot
[    5.816768] Bluetooth: hci0: Device booted in 14622 usecs
[    5.816783] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    5.884471] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[    5.886808] Bluetooth: hci0: Applying Intel DDC parameters completed
[    5.887933] Bluetooth: hci0: Firmware revision 0.4 build 132 week 3 2024
[    5.889870] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[    5.956260] Bluetooth: MGMT ver 1.22
[    5.976928] NET: Registered PF_ALG protocol family
[    6.759660] Console: switching to colour frame buffer device 240x67
[    6.779467] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    6.907001] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.907009] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.907012] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.907014] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.907016] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.907018] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    6.907020] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.985235] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    6.985275] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    6.985306] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    6.985337] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    6.985369] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    7.073032] warning: `DCon01' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[    7.119439] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    7.769380] r8169 0000:2b:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM
[    8.051128] typec port0: bound usb3-port2 (ops connector_ops)
[    8.051148] typec port0: bound usb2-port1 (ops connector_ops)
[   10.776688] wlp0s20f3: authenticate with 54:af:97:64:74:28
[   10.776719] wlp0s20f3: 80 MHz not supported, disabling VHT
[   10.787704] wlp0s20f3: send auth to 54:af:97:64:74:28 (try 1/3)
[   10.814632] wlp0s20f3: authenticated
[   10.816720] wlp0s20f3: associate with 54:af:97:64:74:28 (try 1/3)
[   10.821050] wlp0s20f3: RX AssocResp from 54:af:97:64:74:28 (capab=0x1411 status=0 aid=2)
[   10.831169] wlp0s20f3: associated
[   10.841761] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 54:af:97:64:74:28
[   12.849681] br-850deb5338e9: port 1(veth280e2a5) entered blocking state
[   12.849686] br-850deb5338e9: port 1(veth280e2a5) entered disabled state
[   12.849697] veth280e2a5: entered allmulticast mode
[   12.849752] veth280e2a5: entered promiscuous mode
[   12.849844] br-850deb5338e9: port 1(veth280e2a5) entered blocking state
[   12.849847] br-850deb5338e9: port 1(veth280e2a5) entered forwarding state
[   12.850053] br-850deb5338e9: port 1(veth280e2a5) entered disabled state
[   12.958858] overlayfs: "xino" feature enabled using 3 upper inode bits.
[   13.067528] eth0: renamed from veth1ca9d0d
[   13.100875] br-850deb5338e9: port 1(veth280e2a5) entered blocking state
[   13.100883] br-850deb5338e9: port 1(veth280e2a5) entered forwarding state
[   13.346240] tun: Universal TUN/TAP device driver, 1.6
[   13.348164] qemu: entered promiscuous mode
[   13.349235] dockerbridge: port 1(qemu) entered blocking state
[   13.349238] dockerbridge: port 1(qemu) entered disabled state
[   13.349246] qemu: entered allmulticast mode
[   13.349285] dockerbridge: port 1(qemu) entered blocking state
[   13.349286] dockerbridge: port 1(qemu) entered forwarding state
[   18.018995] block nvme0n1: No UUID available providing old NGUID
[   19.219182] Bluetooth: RFCOMM TTY layer initialized
[   19.219189] Bluetooth: RFCOMM socket layer initialized
[   19.219191] Bluetooth: RFCOMM ver 1.11

and here is the content of dmesg after I reinserted both keyboard and mouse:-

[ 1052.636653] usb 3-4: USB disconnect, device number 3
[ 1055.710443] usb 3-4: new low-speed USB device number 9 using xhci_hcd
[ 1055.854821] usb 3-4: New USB device found, idVendor=03f0, idProduct=6a41, bcdDevice= 1.00
[ 1055.854831] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1055.854834] usb 3-4: Product: HP USB Optical Mouse
[ 1055.854837] usb 3-4: Manufacturer: PixArt
[ 1055.859223] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:03F0:6A41.0009/input/input36
[ 1055.859382] hid-generic 0003:03F0:6A41.0009: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-4/input0
[ 1059.657028] usb 3-8: USB disconnect, device number 5
[ 1061.663753] usb 3-8: new low-speed USB device number 10 using xhci_hcd
[ 1061.813596] usb 3-8: New USB device found, idVendor=03f0, idProduct=6941, bcdDevice= 1.01
[ 1061.813605] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1061.813608] usb 3-8: Product: HP Wired Keyboard
[ 1061.813611] usb 3-8: Manufacturer: SIGMACHIP
[ 1061.818654] input: SIGMACHIP HP Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/0003:03F0:6941.000A/input/input37
[ 1061.927560] hid-generic 0003:03F0:6941.000A: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP HP Wired Keyboard] on usb-0000:00:14.0-8/input0
[ 1061.930873] input: SIGMACHIP HP Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/0003:03F0:6941.000B/input/input38
[ 1061.987301] input: SIGMACHIP HP Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/0003:03F0:6941.000B/input/input39
[ 1061.987705] hid-generic 0003:03F0:6941.000B: input,hidraw2: USB HID v1.10 Device [SIGMACHIP HP Wired Keyboard] on usb-0000:00:14.0-8/input1

Offline

#4 2024-10-30 14:42:44

gromit
Package Maintainer (PM)
From: Germany
Registered: 2024-02-10
Posts: 647
Website

Re: Mouse and Keyboard works only after reinserting (on every reboot)

So which packages did get updated int the related transactions during that time (maybe have a look at /var/log/pacman.log) ?

Offline

#5 2024-10-30 15:26:48

seth
Member
Registered: 2012-09-03
Posts: 58,413

Re: Mouse and Keyboard works only after reinserting (on every reboot)

and here is the content of dmesg after I reinserted both keyboard and mouse:-

dmesg, or rather system journal, *before* that would maybe more useful to understand what happens when you lose the device.

Might just be https://wiki.archlinux.org/title/Power_ … utosuspend
"usbcore.autosuspend=-1" will disable it but nb. that the value can and will be overridden globaly and/or per device by userspace tools like TLP. You'd have to configure it there (as well).

Offline

Board footer

Powered by FluxBB