You are not logged in.
- Topics: Active | Unanswered
#1 2024-09-16 15:19:03
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
[SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Relevant part from lspci -k
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8852BE PCIe 802.11ax Wireless Network Controller
Subsystem: AzureWave Device 5470
Kernel modules: rtw89_8852beOutput from dmesg
[ +1.022119] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ +0.000007] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ +0.000005] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ +0.000009] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f55
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f2f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccdb
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccdb
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ +1.721237] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ +0.000007] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ +0.000004] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ +0.000009] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f39
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f7f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f35
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +1.518159] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ +0.000008] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ +0.000004] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ +0.000009] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890dfdb
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f33
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890dcd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f37
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890cce3
[ +1.716038] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ +0.000008] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ +0.000006] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ +0.000010] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ +0.000016] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890cce1
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ +0.000016] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ +0.000016] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ +0.000016] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f33
[ +0.000016] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ +0.000037] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3b
[ +0.000018] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3d
[ +0.000016] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f2f
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ +1.711477] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ +0.000007] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ +0.000005] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ +0.000008] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f37
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f5f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f7f
[ +0.000015] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ +0.000014] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f33
[ +0.000012] rtw89_8852be 0000:04:00.0: failed to setup chip information
[ +0.000548] rtw89_8852be 0000:04:00.0: probe with driver rtw89_8852be failed with error -110Last edited by Vamp898 (2024-11-12 12:19:38)
Offline
#2 2024-09-16 15:37:59
- gromit
- Package Maintainer (PM)
- From: Germany
- Registered: 2024-02-10
- Posts: 662
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Does it work again after downgrading to 6.10.y? Also could you post a full dmesg?
Offline
#3 2024-09-16 15:57:10
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
gromit wrote:
Does it work again after downgrading to 6.10.y? Also could you post a full dmesg?
Works as expected after downgrading, yes.
Here is the full dmesg
[ 0.000000] Linux version 6.11.0-arch1-1 (linux@archlinux) (gcc (GCC) 14.2.1 20240910, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Sun, 15 Sep 2024 18:38:36 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7cf30bbc-cfa9-4a81-98c1-f28a9160dc04 rw loglevel=3 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20f000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000c345cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c345d000-0x00000000c37bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c37c0000-0x00000000c392dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c392e000-0x00000000c54affff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c54b0000-0x00000000c69fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c69ff000-0x00000000c7ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000caffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd500000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000f2e2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000f2e300000-0x000000102fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xb24c6018-0xb24d3867] usable ==> usable
[ 0.000000] e820: update [mem 0xb24b8018-0xb24c5857] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a20f000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000b24b8017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b24b8018-0x00000000b24c5857] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b24c5858-0x00000000b24c6017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b24c6018-0x00000000b24d3867] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b24d3868-0x00000000c345cfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c345d000-0x00000000c37bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c37c0000-0x00000000c392dfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000c392e000-0x00000000c54affff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000c54b0000-0x00000000c69fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c69ff000-0x00000000c7ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c8000000-0x00000000caffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd500000-0x00000000fd5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000f2e2fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000f2e300000-0x000000102fffffff] reserved
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI=0xc392d000 ACPI 2.0=0xc392d014 TPMFinalLog=0xc4465000 SMBIOS=0xc67f0000 SMBIOS 3.0=0xc67ef000 MEMATTR=0xc0218018 ESRT=0xc25c5098 INITRD=0xb89eae18 RNG=0xc390cc18 TPMEventLog=0xb2cd5018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem65: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ 0.000000] efi: Remove mem66: MMIO range=[0xfd100000-0xfd1fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd100000-0xfd1fffff] reserved
[ 0.000000] efi: Remove mem67: MMIO range=[0xfd500000-0xfd5fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd500000-0xfd5fffff] reserved
[ 0.000000] efi: Not removing mem68: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem69: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem70: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem71: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem72: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem73: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem74: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem75: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem76: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem77: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: ASUS System Product Name/TUF GAMING B550M-PLUS, BIOS 3404 10/07/2023
[ 0.000000] DMI: Memory slots populated: 2/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3792.985 MHz processor
[ 0.000132] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000134] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000141] last_pfn = 0xf2e300 max_arch_pfn = 0x400000000
[ 0.000149] MTRR map: 6 entries (4 fixed + 2 variable; max 21), built from 9 variable MTRRs
[ 0.000150] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000290] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000296] last_pfn = 0xc8000 max_arch_pfn = 0x400000000
[ 0.003077] esrt: Reserving ESRT space from 0x00000000c25c5098 to 0x00000000c25c50d0.
[ 0.003081] e820: update [mem 0xc25c5000-0xc25c5fff] usable ==> reserved
[ 0.003094] Using GB pages for direct mapping
[ 0.003645] Secure boot disabled
[ 0.003646] RAMDISK: [mem 0xb2cda000-0xb4e22fff]
[ 0.003761] ACPI: Early table checksum verification disabled
[ 0.003764] ACPI: RSDP 0x00000000C392D014 000024 (v02 ALASKA)
[ 0.003767] ACPI: XSDT 0x00000000C392C728 0000DC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003772] ACPI: FACP 0x00000000C391D000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003775] ACPI: DSDT 0x00000000C3911000 00B336 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.003777] ACPI: FACS 0x00000000C4495000 000040
[ 0.003779] ACPI: IVRS 0x00000000C392B000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003780] ACPI: SSDT 0x00000000C3923000 0072B0 (v02 AMD Artic 00000002 MSFT 04000000)
[ 0.003782] ACPI: SSDT 0x00000000C391F000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
[ 0.003783] ACPI: SSDT 0x00000000C391E000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003785] ACPI: FIDT 0x00000000C3910000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003787] ACPI: FPDT 0x00000000C3809000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003788] ACPI: MCFG 0x00000000C390E000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003790] ACPI: HPET 0x00000000C390D000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003791] ACPI: VFCT 0x00000000C38FE000 00D884 (v01 ALASKA A M I 00000001 AMD 31504F47)
[ 0.003793] ACPI: BGRT 0x00000000C38FD000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003794] ACPI: WPBT 0x00000000C381E000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.003796] ACPI: TPM2 0x00000000C381D000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003797] ACPI: SSDT 0x00000000C3817000 005354 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003799] ACPI: CRAT 0x00000000C3816000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003801] ACPI: CDIT 0x00000000C3815000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003802] ACPI: SSDT 0x00000000C3814000 000D53 (v02 AMD ArticIG2 00000001 INTL 20120913)
[ 0.003804] ACPI: SSDT 0x00000000C3812000 0010C1 (v02 AMD ArticTPX 00000001 INTL 20120913)
[ 0.003805] ACPI: SSDT 0x00000000C380E000 003E6E (v02 AMD ArticN 00000001 INTL 20120913)
[ 0.003807] ACPI: WSMT 0x00000000C380D000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003808] ACPI: APIC 0x00000000C380C000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.003810] ACPI: SSDT 0x00000000C380B000 00007D (v02 AMD ArticDIS 00000001 INTL 20120913)
[ 0.003811] ACPI: SSDT 0x00000000C380A000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.003812] ACPI: Reserving FACP table memory at [mem 0xc391d000-0xc391d113]
[ 0.003813] ACPI: Reserving DSDT table memory at [mem 0xc3911000-0xc391c335]
[ 0.003814] ACPI: Reserving FACS table memory at [mem 0xc4495000-0xc449503f]
[ 0.003814] ACPI: Reserving IVRS table memory at [mem 0xc392b000-0xc392b0cf]
[ 0.003815] ACPI: Reserving SSDT table memory at [mem 0xc3923000-0xc392a2af]
[ 0.003815] ACPI: Reserving SSDT table memory at [mem 0xc391f000-0xc3922b8d]
[ 0.003816] ACPI: Reserving SSDT table memory at [mem 0xc391e000-0xc391e220]
[ 0.003816] ACPI: Reserving FIDT table memory at [mem 0xc3910000-0xc391009b]
[ 0.003816] ACPI: Reserving FPDT table memory at [mem 0xc3809000-0xc3809043]
[ 0.003817] ACPI: Reserving MCFG table memory at [mem 0xc390e000-0xc390e03b]
[ 0.003817] ACPI: Reserving HPET table memory at [mem 0xc390d000-0xc390d037]
[ 0.003818] ACPI: Reserving VFCT table memory at [mem 0xc38fe000-0xc390b883]
[ 0.003818] ACPI: Reserving BGRT table memory at [mem 0xc38fd000-0xc38fd037]
[ 0.003819] ACPI: Reserving WPBT table memory at [mem 0xc381e000-0xc381e03b]
[ 0.003819] ACPI: Reserving TPM2 table memory at [mem 0xc381d000-0xc381d04b]
[ 0.003819] ACPI: Reserving SSDT table memory at [mem 0xc3817000-0xc381c353]
[ 0.003820] ACPI: Reserving CRAT table memory at [mem 0xc3816000-0xc3816ee7]
[ 0.003820] ACPI: Reserving CDIT table memory at [mem 0xc3815000-0xc3815028]
[ 0.003821] ACPI: Reserving SSDT table memory at [mem 0xc3814000-0xc3814d52]
[ 0.003821] ACPI: Reserving SSDT table memory at [mem 0xc3812000-0xc38130c0]
[ 0.003822] ACPI: Reserving SSDT table memory at [mem 0xc380e000-0xc3811e6d]
[ 0.003822] ACPI: Reserving WSMT table memory at [mem 0xc380d000-0xc380d027]
[ 0.003823] ACPI: Reserving APIC table memory at [mem 0xc380c000-0xc380c15d]
[ 0.003823] ACPI: Reserving SSDT table memory at [mem 0xc380b000-0xc380b07c]
[ 0.003823] ACPI: Reserving SSDT table memory at [mem 0xc380a000-0xc380a0be]
[ 0.003876] No NUMA configuration found
[ 0.003877] Faking a node at [mem 0x0000000000000000-0x0000000f2e2fffff]
[ 0.003879] NODE_DATA(0) allocated [mem 0xf2e2fb000-0xf2e2fffff]
[ 0.003927] Zone ranges:
[ 0.003928] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003930] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003931] Normal [mem 0x0000000100000000-0x0000000f2e2fffff]
[ 0.003931] Device empty
[ 0.003932] Movable zone start for each node
[ 0.003932] Early memory node ranges
[ 0.003933] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.003934] node 0: [mem 0x0000000000100000-0x0000000009d1efff]
[ 0.003934] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003935] node 0: [mem 0x000000000a20f000-0x000000000affffff]
[ 0.003935] node 0: [mem 0x000000000b020000-0x00000000c345cfff]
[ 0.003936] node 0: [mem 0x00000000c69ff000-0x00000000c7ffffff]
[ 0.003936] node 0: [mem 0x0000000100000000-0x0000000f2e2fffff]
[ 0.003941] Initmem setup node 0 [mem 0x0000000000001000-0x0000000f2e2fffff]
[ 0.003944] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003955] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.004042] On node 0, zone DMA32: 737 pages in unavailable ranges
[ 0.004054] On node 0, zone DMA32: 15 pages in unavailable ranges
[ 0.006878] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.006978] On node 0, zone DMA32: 13730 pages in unavailable ranges
[ 0.068902] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.069226] ACPI: PM-Timer IO Port: 0x808
[ 0.069232] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.069235] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.069247] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[ 0.069252] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[ 0.069253] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.069255] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.069257] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.069258] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.069266] e820: update [mem 0xbf1d2000-0xbf217fff] usable ==> reserved
[ 0.069281] CPU topo: Max. logical packages: 1
[ 0.069281] CPU topo: Max. logical dies: 1
[ 0.069282] CPU topo: Max. dies per package: 1
[ 0.069284] CPU topo: Max. threads per core: 2
[ 0.069284] CPU topo: Num. cores per package: 8
[ 0.069285] CPU topo: Num. threads per package: 16
[ 0.069285] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[ 0.069286] CPU topo: Rejected CPUs 16
[ 0.069304] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.069305] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.069306] PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
[ 0.069307] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20efff]
[ 0.069308] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.069309] PM: hibernation: Registered nosave memory: [mem 0xb24b8000-0xb24b8fff]
[ 0.069310] PM: hibernation: Registered nosave memory: [mem 0xb24c5000-0xb24c5fff]
[ 0.069310] PM: hibernation: Registered nosave memory: [mem 0xb24c6000-0xb24c6fff]
[ 0.069311] PM: hibernation: Registered nosave memory: [mem 0xb24d3000-0xb24d3fff]
[ 0.069312] PM: hibernation: Registered nosave memory: [mem 0xbf1d2000-0xbf217fff]
[ 0.069313] PM: hibernation: Registered nosave memory: [mem 0xc25c5000-0xc25c5fff]
[ 0.069314] PM: hibernation: Registered nosave memory: [mem 0xc345d000-0xc37bffff]
[ 0.069315] PM: hibernation: Registered nosave memory: [mem 0xc37c0000-0xc392dfff]
[ 0.069315] PM: hibernation: Registered nosave memory: [mem 0xc392e000-0xc54affff]
[ 0.069315] PM: hibernation: Registered nosave memory: [mem 0xc54b0000-0xc69fefff]
[ 0.069316] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcaffffff]
[ 0.069317] PM: hibernation: Registered nosave memory: [mem 0xcb000000-0xceffffff]
[ 0.069317] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xcfffffff]
[ 0.069318] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe9fffff]
[ 0.069318] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.069318] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.069319] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.069319] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.069320] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.069320] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.069320] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.069321] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.069321] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.069321] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.069322] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.069322] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.069323] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.069323] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.069323] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.069324] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.069325] [mem 0xd0000000-0xfe9fffff] available for PCI devices
[ 0.069326] Booting paravirtualized kernel on bare hardware
[ 0.069328] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.072719] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.073354] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.073358] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.073360] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.073363] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[ 0.073375] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7cf30bbc-cfa9-4a81-98c1-f28a9160dc04 rw loglevel=3 quiet
[ 0.073415] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[ 0.077537] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[ 0.079579] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.079654] Fallback order for Node 0: 0
[ 0.079659] Built 1 zonelists, mobility grouping on. Total pages: 15673837
[ 0.079660] Policy zone: Normal
[ 0.079822] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.079864] software IO TLB: area num 16.
[ 0.160785] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.160825] ftrace: allocating 50625 entries in 198 pages
[ 0.169399] ftrace: allocated 198 pages with 4 groups
[ 0.169453] Dynamic Preempt: full
[ 0.169500] rcu: Preemptible hierarchical RCU implementation.
[ 0.169500] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.169501] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.169502] Trampoline variant of Tasks RCU enabled.
[ 0.169502] Rude variant of Tasks RCU enabled.
[ 0.169503] Tracing variant of Tasks RCU enabled.
[ 0.169503] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.169504] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.169512] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.169514] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.169515] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.171824] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.172007] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.172103] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.172126] Console: colour dummy device 80x25
[ 0.172128] printk: legacy console [tty0] enabled
[ 0.172158] ACPI: Core revision 20240322
[ 0.172269] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.172284] APIC: Switch to symmetric I/O mode setup
[ 0.173018] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[ 0.173260] x2apic enabled
[ 0.173305] APIC: Switched APIC routing to: cluster x2apic
[ 0.173897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.188958] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d58ead367a, max_idle_ns: 881590573723 ns
[ 0.188963] Calibrating delay loop (skipped), value calculated using timer frequency.. 7589.05 BogoMIPS (lpj=12643283)
[ 0.188979] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.189012] LVT offset 1 assigned for vector 0xf9
[ 0.189119] LVT offset 2 assigned for vector 0xf4
[ 0.189143] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.189145] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.189147] process: using mwait in idle threads
[ 0.189149] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.189151] Spectre V2 : Mitigation: Retpolines
[ 0.189152] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.189152] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.189153] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.189154] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.189154] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.189155] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.189156] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.189161] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.189162] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.189163] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.189164] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.189164] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.189165] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.189166] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.189167] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
[ 0.189167] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[ 0.210896] Freeing SMP alternatives memory: 40K
[ 0.210899] pid_max: default: 32768 minimum: 301
[ 0.212329] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 0.212354] landlock: Up and running.
[ 0.212355] Yama: becoming mindful.
[ 0.212359] LSM support for eBPF active
[ 0.212434] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.212493] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.322861] smpboot: CPU0: AMD Ryzen 7 5700G with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[ 0.323103] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.323109] ... version: 0
[ 0.323110] ... bit width: 48
[ 0.323111] ... generic registers: 6
[ 0.323112] ... value mask: 0000ffffffffffff
[ 0.323113] ... max period: 00007fffffffffff
[ 0.323114] ... fixed-purpose events: 0
[ 0.323115] ... event mask: 000000000000003f
[ 0.323200] signal: max sigframe size: 3376
[ 0.323231] rcu: Hierarchical SRCU implementation.
[ 0.323233] rcu: Max phase no-delay instances is 1000.
[ 0.323295] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.325627] MCE: In-kernel MCE decoding enabled.
[ 0.325627] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.325627] smp: Bringing up secondary CPUs ...
[ 0.325627] smpboot: x86: Booting SMP configuration:
[ 0.325627] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.344298] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.359001] smp: Brought up 1 node, 16 CPUs
[ 0.359001] smpboot: Total of 16 processors activated (121424.83 BogoMIPS)
[ 0.360602] Memory: 61440724K/62695348K available (18432K kernel code, 2187K rwdata, 13516K rodata, 3452K init, 3432K bss, 1234664K reserved, 0K cma-reserved)
[ 0.362793] devtmpfs: initialized
[ 0.362793] x86/mm: Memory block size: 128MB
[ 0.365662] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20efff] (61440 bytes)
[ 0.365665] ACPI: PM: Registering ACPI NVS region [mem 0xc392e000-0xc54affff] (28844032 bytes)
[ 0.366001] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.366001] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.366001] pinctrl core: initialized pinctrl subsystem
[ 0.368961] PM: RTC time: 11:19:52, date: 2024-09-16
[ 0.368961] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.368961] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.368961] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.368961] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.368961] audit: initializing netlink subsys (disabled)
[ 0.369004] audit: type=2000 audit(1726485592.196:1): state=initialized audit_enabled=0 res=1
[ 0.369073] thermal_sys: Registered thermal governor 'fair_share'
[ 0.369075] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.369076] thermal_sys: Registered thermal governor 'step_wise'
[ 0.369077] thermal_sys: Registered thermal governor 'user_space'
[ 0.369078] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.369085] cpuidle: using governor ladder
[ 0.369085] cpuidle: using governor menu
[ 0.369085] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.369118] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[ 0.369131] PCI: Using configuration type 1 for base access
[ 0.369238] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.375617] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.375617] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.375617] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.375617] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.375821] ACPI: Added _OSI(Module Device)
[ 0.375821] ACPI: Added _OSI(Processor Device)
[ 0.375821] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.375821] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.396486] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.399024] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.403781] ACPI: Interpreter enabled
[ 0.403799] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.403800] ACPI: Using IOAPIC for interrupt routing
[ 0.405005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.405005] PCI: Ignoring E820 reservations for host bridge windows
[ 0.405005] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.435505] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.435512] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.435679] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
[ 0.435976] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.435989] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.436552] PCI host bridge to bus 0000:00
[ 0.436557] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.436559] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.436561] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.436562] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.436564] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.436566] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec2ffff window]
[ 0.436567] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.436569] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.436582] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 conventional PCI endpoint
[ 0.436695] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 conventional PCI endpoint
[ 0.436803] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.436867] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.436928] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
[ 0.436943] pci 0000:00:02.1: PCI bridge to [bus 01-05]
[ 0.436947] pci 0000:00:02.1: bridge window [io 0xd000-0xefff]
[ 0.436950] pci 0000:00:02.1: bridge window [mem 0xfcc00000-0xfcefffff]
[ 0.436961] pci 0000:00:02.1: enabling Extended Tags
[ 0.436998] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.437148] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 PCIe Root Port
[ 0.437163] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.437168] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.437212] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.437318] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.437381] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 PCIe Root Port
[ 0.437396] pci 0000:00:08.1: PCI bridge to [bus 07]
[ 0.437400] pci 0000:00:08.1: bridge window [io 0xf000-0xffff]
[ 0.437402] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
[ 0.437408] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[ 0.437414] pci 0000:00:08.1: enabling Extended Tags
[ 0.437449] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.437601] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.437735] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.437885] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 conventional PCI endpoint
[ 0.437924] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 conventional PCI endpoint
[ 0.437960] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 conventional PCI endpoint
[ 0.437999] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 conventional PCI endpoint
[ 0.438035] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 conventional PCI endpoint
[ 0.438071] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 conventional PCI endpoint
[ 0.438107] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 conventional PCI endpoint
[ 0.438145] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 conventional PCI endpoint
[ 0.438255] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.438273] pci 0000:01:00.0: BAR 0 [mem 0xfcea0000-0xfcea7fff 64bit]
[ 0.438312] pci 0000:01:00.0: enabling Extended Tags
[ 0.438368] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.438542] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.438588] pci 0000:01:00.1: BAR 5 [mem 0xfce80000-0xfce9ffff]
[ 0.438596] pci 0000:01:00.1: ROM [mem 0xfce00000-0xfce7ffff pref]
[ 0.438604] pci 0000:01:00.1: enabling Extended Tags
[ 0.438646] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 0.438752] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.438780] pci 0000:01:00.2: PCI bridge to [bus 02-05]
[ 0.438786] pci 0000:01:00.2: bridge window [io 0xd000-0xefff]
[ 0.438790] pci 0000:01:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
[ 0.438810] pci 0000:01:00.2: enabling Extended Tags
[ 0.438857] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 0.438978] pci 0000:00:02.1: PCI bridge to [bus 01-05]
[ 0.439124] pci 0000:02:00.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.439152] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.439182] pci 0000:02:00.0: enabling Extended Tags
[ 0.439240] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.439368] pci 0000:02:08.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.439397] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.439404] pci 0000:02:08.0: bridge window [io 0xe000-0xefff]
[ 0.439407] pci 0000:02:08.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.439430] pci 0000:02:08.0: enabling Extended Tags
[ 0.439488] pci 0000:02:08.0: PME# supported from D3hot D3cold
[ 0.439606] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.439635] pci 0000:02:09.0: PCI bridge to [bus 05]
[ 0.439642] pci 0000:02:09.0: bridge window [io 0xd000-0xdfff]
[ 0.439645] pci 0000:02:09.0: bridge window [mem 0xfcc00000-0xfccfffff]
[ 0.439668] pci 0000:02:09.0: enabling Extended Tags
[ 0.439725] pci 0000:02:09.0: PME# supported from D3hot D3cold
[ 0.439852] pci 0000:01:00.2: PCI bridge to [bus 02-05]
[ 0.439908] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.439999] pci 0000:04:00.0: [10ec:b852] type 00 class 0x028000 PCIe Endpoint
[ 0.440028] pci 0000:04:00.0: BAR 0 [io 0xe000-0xe0ff]
[ 0.440063] pci 0000:04:00.0: BAR 2 [mem 0xfcd00000-0xfcdfffff 64bit]
[ 0.440252] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.440532] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.440616] pci 0000:05:00.0: [10ec:8125] type 00 class 0x020000 PCIe Endpoint
[ 0.440640] pci 0000:05:00.0: BAR 0 [io 0xd000-0xd0ff]
[ 0.440672] pci 0000:05:00.0: BAR 2 [mem 0xfcc00000-0xfcc0ffff 64bit]
[ 0.440693] pci 0000:05:00.0: BAR 4 [mem 0xfcc10000-0xfcc13fff 64bit]
[ 0.440847] pci 0000:05:00.0: supports D1 D2
[ 0.440849] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.441138] pci 0000:02:09.0: PCI bridge to [bus 05]
[ 0.441222] pci 0000:06:00.0: [144d:a80a] type 00 class 0x010802 PCIe Endpoint
[ 0.441240] pci 0000:06:00.0: BAR 0 [mem 0xfcf00000-0xfcf03fff 64bit]
[ 0.441425] pci 0000:06:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:02.2 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[ 0.441511] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.441608] pci 0000:07:00.0: [1002:1638] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.441620] pci 0000:07:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.441628] pci 0000:07:00.0: BAR 2 [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.441634] pci 0000:07:00.0: BAR 4 [io 0xf000-0xf0ff]
[ 0.441639] pci 0000:07:00.0: BAR 5 [mem 0xfcb00000-0xfcb7ffff]
[ 0.441648] pci 0000:07:00.0: enabling Extended Tags
[ 0.441702] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.441740] pci 0000:07:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.441834] pci 0000:07:00.1: [1002:1637] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.441842] pci 0000:07:00.1: BAR 0 [mem 0xfcb80000-0xfcb83fff]
[ 0.441863] pci 0000:07:00.1: enabling Extended Tags
[ 0.441896] pci 0000:07:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.441984] pci 0000:07:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint
[ 0.441998] pci 0000:07:00.2: BAR 2 [mem 0xfca00000-0xfcafffff]
[ 0.442008] pci 0000:07:00.2: BAR 5 [mem 0xfcb84000-0xfcb85fff]
[ 0.442016] pci 0000:07:00.2: enabling Extended Tags
[ 0.442131] pci 0000:07:00.3: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[ 0.442142] pci 0000:07:00.3: BAR 0 [mem 0xfc900000-0xfc9fffff 64bit]
[ 0.442166] pci 0000:07:00.3: enabling Extended Tags
[ 0.442201] pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
[ 0.442296] pci 0000:07:00.4: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[ 0.442307] pci 0000:07:00.4: BAR 0 [mem 0xfc800000-0xfc8fffff 64bit]
[ 0.442331] pci 0000:07:00.4: enabling Extended Tags
[ 0.442365] pci 0000:07:00.4: PME# supported from D0 D3hot D3cold
[ 0.442474] pci 0000:00:08.1: PCI bridge to [bus 07]
[ 0.443279] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.443352] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.443416] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.443493] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.443563] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.443622] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.443680] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.443739] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.445637] iommu: Default domain type: Translated
[ 0.445637] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.445786] SCSI subsystem initialized
[ 0.445793] libata version 3.00 loaded.
[ 0.445793] ACPI: bus type USB registered
[ 0.445793] usbcore: registered new interface driver usbfs
[ 0.445793] usbcore: registered new interface driver hub
[ 0.445793] usbcore: registered new device driver usb
[ 0.445793] EDAC MC: Ver: 3.0.0
[ 0.445793] efivars: Registered efivars operations
[ 0.445840] NetLabel: Initializing
[ 0.445842] NetLabel: domain hash size = 128
[ 0.445843] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.445862] NetLabel: unlabeled traffic allowed by default
[ 0.445867] mctp: management component transport protocol core
[ 0.445869] NET: Registered PF_MCTP protocol family
[ 0.445871] PCI: Using ACPI for IRQ routing
[ 0.449851] PCI: pci_cache_line_size set to 64 bytes
[ 0.449903] e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
[ 0.449906] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.449907] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.449908] e820: reserve RAM buffer [mem 0xb24b8018-0xb3ffffff]
[ 0.449910] e820: reserve RAM buffer [mem 0xb24c6018-0xb3ffffff]
[ 0.449911] e820: reserve RAM buffer [mem 0xbf1d2000-0xbfffffff]
[ 0.449912] e820: reserve RAM buffer [mem 0xc25c5000-0xc3ffffff]
[ 0.449914] e820: reserve RAM buffer [mem 0xc345d000-0xc3ffffff]
[ 0.449915] e820: reserve RAM buffer [mem 0xf2e300000-0xf2fffffff]
[ 0.452317] pci 0000:07:00.0: vgaarb: setting as boot VGA device
[ 0.452317] pci 0000:07:00.0: vgaarb: bridge control possible
[ 0.452317] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.452317] vgaarb: loaded
[ 0.452338] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.452342] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.454418] clocksource: Switched to clocksource tsc-early
[ 0.454554] VFS: Disk quotas dquot_6.6.0
[ 0.454554] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.454554] pnp: PnP ACPI init
[ 0.454554] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.454554] system 00:01: [mem 0xf30000000-0x102fffffff window] has been reserved
[ 0.454554] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.454554] system 00:03: [io 0x0200-0x021f] has been reserved
[ 0.454554] pnp 00:04: [dma 0 disabled]
[ 0.454554] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.454554] system 00:05: [io 0x040b] has been reserved
[ 0.454554] system 00:05: [io 0x04d6] has been reserved
[ 0.454554] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.454554] system 00:05: [io 0x0c14] has been reserved
[ 0.454554] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.454554] system 00:05: [io 0x0c52] has been reserved
[ 0.454554] system 00:05: [io 0x0c6c] has been reserved
[ 0.454554] system 00:05: [io 0x0c6f] has been reserved
[ 0.454554] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.454554] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.454554] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.454554] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.454554] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.454554] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.454554] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.454554] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.454554] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.454554] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.454554] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.454554] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.454554] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.455447] pnp: PnP ACPI: found 6 devices
[ 0.461332] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.461407] NET: Registered PF_INET protocol family
[ 0.461571] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.473665] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.473704] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.473940] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.474333] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.474425] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.474611] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[ 0.474716] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.474835] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.474942] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.474948] NET: Registered PF_XDP protocol family
[ 0.474962] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.474980] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.474983] pci 0000:02:08.0: bridge window [io 0xe000-0xefff]
[ 0.474988] pci 0000:02:08.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.474997] pci 0000:02:09.0: PCI bridge to [bus 05]
[ 0.474999] pci 0000:02:09.0: bridge window [io 0xd000-0xdfff]
[ 0.475004] pci 0000:02:09.0: bridge window [mem 0xfcc00000-0xfccfffff]
[ 0.475012] pci 0000:01:00.2: PCI bridge to [bus 02-05]
[ 0.475014] pci 0000:01:00.2: bridge window [io 0xd000-0xefff]
[ 0.475018] pci 0000:01:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
[ 0.475026] pci 0000:00:02.1: PCI bridge to [bus 01-05]
[ 0.475028] pci 0000:00:02.1: bridge window [io 0xd000-0xefff]
[ 0.475030] pci 0000:00:02.1: bridge window [mem 0xfcc00000-0xfcefffff]
[ 0.475036] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.475039] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.475044] pci 0000:00:08.1: PCI bridge to [bus 07]
[ 0.475046] pci 0000:00:08.1: bridge window [io 0xf000-0xffff]
[ 0.475049] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
[ 0.475052] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[ 0.475056] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.475058] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.475060] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.475062] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.475063] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.475065] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec2ffff window]
[ 0.475067] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.475068] pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
[ 0.475070] pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcefffff]
[ 0.475072] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.475073] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcdfffff]
[ 0.475075] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.475076] pci_bus 0000:04: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.475078] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.475079] pci_bus 0000:05: resource 1 [mem 0xfcc00000-0xfccfffff]
[ 0.475081] pci_bus 0000:06: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.475083] pci_bus 0000:07: resource 0 [io 0xf000-0xffff]
[ 0.475085] pci_bus 0000:07: resource 1 [mem 0xfc800000-0xfcbfffff]
[ 0.475086] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[ 0.475404] pci 0000:07:00.1: D0 power state depends on 0000:07:00.0
[ 0.475413] pci 0000:07:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.475537] pci 0000:07:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.475615] PCI: CLS 64 bytes, default 64
[ 0.475636] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.475677] Trying to unpack rootfs image as initramfs...
[ 0.475691] pci 0000:00:01.0: Adding to iommu group 0
[ 0.475712] pci 0000:00:02.0: Adding to iommu group 1
[ 0.475726] pci 0000:00:02.1: Adding to iommu group 2
[ 0.475740] pci 0000:00:02.2: Adding to iommu group 3
[ 0.475759] pci 0000:00:08.0: Adding to iommu group 4
[ 0.475797] pci 0000:00:08.1: Adding to iommu group 5
[ 0.475843] pci 0000:00:14.0: Adding to iommu group 6
[ 0.475862] pci 0000:00:14.3: Adding to iommu group 6
[ 0.475932] pci 0000:00:18.0: Adding to iommu group 7
[ 0.475948] pci 0000:00:18.1: Adding to iommu group 7
[ 0.475963] pci 0000:00:18.2: Adding to iommu group 7
[ 0.475980] pci 0000:00:18.3: Adding to iommu group 7
[ 0.475995] pci 0000:00:18.4: Adding to iommu group 7
[ 0.476011] pci 0000:00:18.5: Adding to iommu group 7
[ 0.476027] pci 0000:00:18.6: Adding to iommu group 7
[ 0.476043] pci 0000:00:18.7: Adding to iommu group 7
[ 0.476080] pci 0000:01:00.0: Adding to iommu group 8
[ 0.476098] pci 0000:01:00.1: Adding to iommu group 8
[ 0.476117] pci 0000:01:00.2: Adding to iommu group 8
[ 0.476123] pci 0000:02:00.0: Adding to iommu group 8
[ 0.476129] pci 0000:02:08.0: Adding to iommu group 8
[ 0.476136] pci 0000:02:09.0: Adding to iommu group 8
[ 0.476143] pci 0000:04:00.0: Adding to iommu group 8
[ 0.476150] pci 0000:05:00.0: Adding to iommu group 8
[ 0.476167] pci 0000:06:00.0: Adding to iommu group 9
[ 0.476191] pci 0000:07:00.0: Adding to iommu group 10
[ 0.476208] pci 0000:07:00.1: Adding to iommu group 11
[ 0.476226] pci 0000:07:00.2: Adding to iommu group 12
[ 0.476244] pci 0000:07:00.3: Adding to iommu group 13
[ 0.476262] pci 0000:07:00.4: Adding to iommu group 14
[ 0.477820] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.477829] AMD-Vi: Interrupt remapping enabled
[ 0.477830] AMD-Vi: X2APIC enabled
[ 0.516829] Freeing initrd memory: 34084K
[ 0.702652] AMD-Vi: Virtual APIC enabled
[ 0.702661] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.702664] software IO TLB: mapped [mem 0x00000000ba9d4000-0x00000000be9d4000] (64MB)
[ 0.702733] LVT offset 0 assigned for vector 0x400
[ 0.702846] perf: AMD IBS detected (0x000003ff)
[ 0.702857] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.704523] Initialise system trusted keyrings
[ 0.704532] Key type blacklist registered
[ 0.704558] workingset: timestamp_bits=41 max_order=24 bucket_order=0
[ 0.704566] zbud: loaded
[ 0.704658] fuse: init (API version 7.40)
[ 0.704734] integrity: Platform Keyring initialized
[ 0.704737] integrity: Machine keyring initialized
[ 0.713368] Key type asymmetric registered
[ 0.713370] Asymmetric key parser 'x509' registered
[ 0.713392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.713429] io scheduler mq-deadline registered
[ 0.713431] io scheduler kyber registered
[ 0.713440] io scheduler bfq registered
[ 0.715216] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.715332] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.715352] ACPI: button: Power Button [PWRB]
[ 0.715383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.726356] ACPI: button: Power Button [PWRF]
[ 0.726979] Estimated ratio of average max frequency by base frequency (times 1024): 1141
[ 0.726996] Monitor-Mwait will be used to enter C-1 state
[ 0.726999] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 0.727127] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 0.727244] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 0.727363] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[ 0.727484] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[ 0.727603] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[ 0.727722] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[ 0.727827] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[ 0.727914] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 0.727994] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 0.728080] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 0.728192] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[ 0.728280] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[ 0.728366] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[ 0.728461] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[ 0.728567] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[ 0.728835] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.729018] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.731662] Non-volatile memory driver v1.3
[ 0.731663] Linux agpgart interface v0.103
[ 0.879394] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.879830] ACPI: bus type drm_connector registered
[ 0.881779] ahci 0000:01:00.1: version 3.0
[ 0.881926] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 0.881963] ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.881966] ahci 0000:01:00.1: 6/6 ports implemented (port mask 0x3f)
[ 0.881968] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.882472] scsi host0: ahci
[ 0.882646] scsi host1: ahci
[ 0.882761] scsi host2: ahci
[ 0.882862] scsi host3: ahci
[ 0.882953] scsi host4: ahci
[ 0.883047] scsi host5: ahci
[ 0.883077] ata1: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80100 irq 37 lpm-pol 3
[ 0.883079] ata2: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80180 irq 37 lpm-pol 3
[ 0.883081] ata3: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80200 irq 37 lpm-pol 3
[ 0.883082] ata4: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80280 irq 37 lpm-pol 3
[ 0.883084] ata5: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80300 irq 37 lpm-pol 3
[ 0.883086] ata6: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80380 irq 37 lpm-pol 3
[ 0.883168] usbcore: registered new interface driver usbserial_generic
[ 0.883173] usbserial: USB Serial support registered for generic
[ 0.883239] rtc_cmos 00:02: RTC can wake from S4
[ 0.883445] rtc_cmos 00:02: registered as rtc0
[ 0.883471] rtc_cmos 00:02: setting system clock to 2024-09-16T11:19:53 UTC (1726485593)
[ 0.883495] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.884329] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.884776] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.885531] fbcon: Deferring console take-over
[ 0.885533] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.885567] hid: raw HID events driver (C) Jiri Kosina
[ 0.885618] drop_monitor: Initializing network drop monitor service
[ 0.885712] NET: Registered PF_INET6 protocol family
[ 0.890578] Segment Routing with IPv6
[ 0.890580] RPL Segment Routing with IPv6
[ 0.890590] In-situ OAM (IOAM) with IPv6
[ 0.890612] NET: Registered PF_PACKET protocol family
[ 0.891630] microcode: Current revision: 0x0a50000f
[ 0.891872] resctrl: L3 allocation detected
[ 0.891873] resctrl: MB allocation detected
[ 0.891874] resctrl: L3 monitoring detected
[ 0.891900] IPI shorthand broadcast: enabled
[ 0.893913] sched_clock: Marking stable (891605195, 260052)->(1022075766, -130210519)
[ 0.894024] registered taskstats version 1
[ 0.894435] Loading compiled-in X.509 certificates
[ 0.896571] Loaded X.509 cert 'Build time autogenerated kernel key: 1bad038e049bffb5ed6d380eed95e075718c6f9b'
[ 0.900807] zswap: loaded using pool zstd/zsmalloc
[ 0.900880] Demotion targets for Node 0: null
[ 0.901045] Key type .fscrypt registered
[ 0.901046] Key type fscrypt-provisioning registered
[ 0.901155] integrity: Loading X.509 certificate: UEFI:db
[ 0.903749] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 0.903751] integrity: Loading X.509 certificate: UEFI:db
[ 0.903875] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 0.903876] integrity: Loading X.509 certificate: UEFI:db
[ 0.903892] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.903893] integrity: Loading X.509 certificate: UEFI:db
[ 0.903906] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.903908] integrity: Loading X.509 certificate: UEFI:db
[ 0.904032] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.904554] PM: Magic number: 8:657:327
[ 0.907437] RAS: Correctable Errors collector initialized.
[ 0.917266] clk: Disabling unused clocks
[ 0.917268] PM: genpd: Disabling unused power domains
[ 1.199035] ata1: SATA link down (SStatus 0 SControl 330)
[ 1.513810] ata2: SATA link down (SStatus 0 SControl 330)
[ 1.717187] tsc: Refined TSC clocksource calibration: 3792.873 MHz
[ 1.717201] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5818a734c, max_idle_ns: 881590694765 ns
[ 1.717248] clocksource: Switched to clocksource tsc
[ 1.827127] ata3: SATA link down (SStatus 0 SControl 330)
[ 2.140452] ata4: SATA link down (SStatus 0 SControl 330)
[ 2.453332] ata5: SATA link down (SStatus 0 SControl 330)
[ 2.767217] ata6: SATA link down (SStatus 0 SControl 330)
[ 2.768759] Freeing unused decrypted memory: 2028K
[ 2.769250] Freeing unused kernel image (initmem) memory: 3452K
[ 2.769264] Write protecting the kernel read-only data: 32768k
[ 2.769613] Freeing unused kernel image (rodata/data gap) memory: 820K
[ 2.809131] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.809139] rodata_test: all tests were successful
[ 2.809147] Run /init as init process
[ 2.809148] with arguments:
[ 2.809150] /init
[ 2.809152] with environment:
[ 2.809153] HOME=/
[ 2.809154] TERM=linux
[ 2.809155] BOOT_IMAGE=/boot/vmlinuz-linux
[ 2.957208] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 2.957216] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 2.968423] nvme nvme0: pci function 0000:06:00.0
[ 2.979388] nvme nvme0: D3 entry latency set to 10 seconds
[ 2.983258] nvme nvme0: 16/0/0 default/read/poll queues
[ 2.986038] nvme0n1: p1 p2
[ 2.999207] raid6: skipped pq benchmark and selected avx2x4
[ 2.999209] raid6: using avx2x2 recovery algorithm
[ 3.001601] xor: automatically using best checksumming function avx
[ 3.012944] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[ 3.013320] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 3.013325] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 3.013329] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.013414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 3.013419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.013421] usb usb1: Product: xHCI Host Controller
[ 3.013423] usb usb1: Manufacturer: Linux 6.11.0-arch1-1 xhci-hcd
[ 3.013425] usb usb1: SerialNumber: 0000:01:00.0
[ 3.013621] hub 1-0:1.0: USB hub found
[ 3.013641] hub 1-0:1.0: 10 ports detected
[ 3.028636] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.028669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 3.028674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.028676] usb usb2: Product: xHCI Host Controller
[ 3.028679] usb usb2: Manufacturer: Linux 6.11.0-arch1-1 xhci-hcd
[ 3.028681] usb usb2: SerialNumber: 0000:01:00.0
[ 3.028858] hub 2-0:1.0: USB hub found
[ 3.028874] hub 2-0:1.0: 4 ports detected
[ 3.035670] xhci_hcd 0000:07:00.3: xHCI Host Controller
[ 3.035676] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
[ 3.035776] xhci_hcd 0000:07:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[ 3.036078] xhci_hcd 0000:07:00.3: xHCI Host Controller
[ 3.036082] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
[ 3.036084] xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.036118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 3.036120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.036122] usb usb3: Product: xHCI Host Controller
[ 3.036123] usb usb3: Manufacturer: Linux 6.11.0-arch1-1 xhci-hcd
[ 3.036125] usb usb3: SerialNumber: 0000:07:00.3
[ 3.036250] hub 3-0:1.0: USB hub found
[ 3.036275] hub 3-0:1.0: 4 ports detected
[ 3.036505] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.036531] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 3.036533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.036535] usb usb4: Product: xHCI Host Controller
[ 3.036537] usb usb4: Manufacturer: Linux 6.11.0-arch1-1 xhci-hcd
[ 3.036539] usb usb4: SerialNumber: 0000:07:00.3
[ 3.036639] hub 4-0:1.0: USB hub found
[ 3.036648] hub 4-0:1.0: 2 ports detected
[ 3.036889] xhci_hcd 0000:07:00.4: xHCI Host Controller
[ 3.036895] xhci_hcd 0000:07:00.4: new USB bus registered, assigned bus number 5
[ 3.036990] xhci_hcd 0000:07:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[ 3.037313] xhci_hcd 0000:07:00.4: xHCI Host Controller
[ 3.037317] xhci_hcd 0000:07:00.4: new USB bus registered, assigned bus number 6
[ 3.037319] xhci_hcd 0000:07:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.037377] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 3.037380] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.037382] usb usb5: Product: xHCI Host Controller
[ 3.037383] usb usb5: Manufacturer: Linux 6.11.0-arch1-1 xhci-hcd
[ 3.037385] usb usb5: SerialNumber: 0000:07:00.4
[ 3.037491] hub 5-0:1.0: USB hub found
[ 3.037507] hub 5-0:1.0: 4 ports detected
[ 3.037731] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.037780] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 3.037783] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.037784] usb usb6: Product: xHCI Host Controller
[ 3.037786] usb usb6: Manufacturer: Linux 6.11.0-arch1-1 xhci-hcd
[ 3.037788] usb usb6: SerialNumber: 0000:07:00.4
[ 3.037894] hub 6-0:1.0: USB hub found
[ 3.037911] hub 6-0:1.0: 2 ports detected
[ 3.075467] Btrfs loaded, zoned=yes, fsverity=yes
[ 3.276949] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 3.585778] usb 1-6: config 1 has an invalid interface number: 2 but max is 1
[ 3.585782] usb 1-6: config 1 has no interface number 1
[ 3.597819] usb 1-6: New USB device found, idVendor=0b05, idProduct=1939, bcdDevice= 1.00
[ 3.597824] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.597826] usb 1-6: Product: AURA LED Controller
[ 3.597828] usb 1-6: Manufacturer: AsusTek Computer Inc.
[ 3.597830] usb 1-6: SerialNumber: 9876543210
[ 3.624136] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 3.641759] usb 2-1: New USB device found, idVendor=04e8, idProduct=4001, bcdDevice= 1.00
[ 3.641763] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.641766] usb 2-1: Product: PSSD T7
[ 3.641767] usb 2-1: Manufacturer: Samsung
[ 3.641769] usb 2-1: SerialNumber: S6XDNS0W304538Z
[ 3.764027] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 3.926006] usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[ 3.926010] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.926013] usb 1-7: Product: USB2.0 Hub
[ 3.935032] hub 1-7:1.0: USB hub found
[ 3.938997] hub 1-7:1.0: 4 ports detected
[ 4.031029] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 4.050570] usb 2-2: New USB device found, idVendor=24a9, idProduct=205a, bcdDevice= 1.10
[ 4.050574] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 4.050576] usb 2-2: Product: USBTC
[ 4.050578] usb 2-2: Manufacturer: USBTC
[ 4.050579] usb 2-2: SerialNumber: AAC2211600044
[ 4.170739] usb 1-8: new low-speed USB device number 4 using xhci_hcd
[ 4.423867] usb 1-8: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00
[ 4.423871] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.423873] usb 1-8: Product: HP USB Optical Mouse
[ 4.423874] usb 1-8: Manufacturer: PixArt
[ 4.526946] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 4.527073] scsi host6: usb-storage 2-2:1.0
[ 4.527148] usbcore: registered new interface driver usb-storage
[ 4.532936] [drm] amdgpu kernel modesetting enabled.
[ 4.544741] usbcore: registered new interface driver usbhid
[ 4.544744] usbhid: USB HID core driver
[ 4.545318] amdgpu: Virtual CRAT table created for CPU
[ 4.545337] amdgpu: Topology: Add CPU node
[ 4.545434] amdgpu 0000:07:00.0: enabling device (0006 -> 0007)
[ 4.545470] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x1043:0x8809 0xC8).
[ 4.545478] [drm] register mmio base: 0xFCB00000
[ 4.545480] [drm] register mmio size: 524288
[ 4.548201] hid-generic 0003:0B05:1939.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:01:00.0-6/input2
[ 4.548262] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-8/1-8:1.0/0003:03F0:134A.0002/input/input2
[ 4.548307] hid-generic 0003:03F0:134A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:01:00.0-8/input0
[ 4.548349] [drm] add ip block number 0 <soc15_common>
[ 4.548351] [drm] add ip block number 1 <gmc_v9_0>
[ 4.548353] [drm] add ip block number 2 <vega10_ih>
[ 4.548355] [drm] add ip block number 3 <psp>
[ 4.548357] [drm] add ip block number 4 <smu>
[ 4.548358] [drm] add ip block number 5 <dm>
[ 4.548359] [drm] add ip block number 6 <gfx_v9_0>
[ 4.548360] [drm] add ip block number 7 <sdma_v4_0>
[ 4.548361] [drm] add ip block number 8 <vcn_v2_0>
[ 4.548362] [drm] add ip block number 9 <jpeg_v2_0>
[ 4.548372] amdgpu 0000:07:00.0: amdgpu: Fetched VBIOS from VFCT
[ 4.548374] amdgpu: ATOM BIOS: 113-CEZANNE-018
[ 4.560270] usb 1-9: new high-speed USB device number 5 using xhci_hcd
[ 4.560710] scsi host7: uas
[ 4.560837] usbcore: registered new interface driver uas
[ 4.562245] scsi 7:0:0:0: Direct-Access Samsung PSSD T7 0 PQ: 0 ANSI: 6
[ 4.564630] sd 7:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.564758] sd 7:0:0:0: [sda] Write Protect is off
[ 4.564761] sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.564925] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.590966] amdgpu 0000:07:00.0: vgaarb: deactivate vga console
[ 4.590976] amdgpu 0000:07:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[ 4.590984] amdgpu 0000:07:00.0: amdgpu: MODE2 reset
[ 4.591434] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 4.591444] amdgpu 0000:07:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 4.591447] amdgpu 0000:07:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 4.591461] [drm] Detected VRAM RAM=4096M, BAR=4096M
[ 4.591463] [drm] RAM width 128bits DDR4
[ 4.591678] [drm] amdgpu: 4096M of VRAM memory ready
[ 4.591681] [drm] amdgpu: 30029M of GTT memory ready.
[ 4.591700] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.591875] [drm] PCIE GART of 1024M enabled.
[ 4.591878] [drm] PTB located at 0x000000F4FFC00000
[ 4.592475] [drm] Loading DMUB firmware via PSP: version=0x0101002B
[ 4.592839] [drm] Found VCN firmware Version ENC: 1.21 DEC: 7 VEP: 0 Revision: 3
[ 4.604506] sd 7:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 4.604511] sd 7:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 4.627907] sd 7:0:0:0: [sda] Attached SCSI disk
[ 4.717983] usb 1-9: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 4.717988] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.717990] usb 1-9: Product: USB2.0 HUB
[ 4.728931] hub 1-9:1.0: USB hub found
[ 4.731965] hub 1-9:1.0: 4 ports detected
[ 5.143612] usb 1-9.1: new full-speed USB device number 6 using xhci_hcd
[ 5.295759] amdgpu 0000:07:00.0: amdgpu: reserve 0x400000 from 0xf4ff800000 for PSP TMR
[ 5.382223] amdgpu 0000:07:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 5.393069] amdgpu 0000:07:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 5.393071] amdgpu 0000:07:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 5.393920] amdgpu 0000:07:00.0: amdgpu: SMU is initialized successfully!
[ 5.395057] [drm] Display Core v3.2.291 initialized on DCN 2.1
[ 5.395059] [drm] DP-HDMI FRL PCON supported
[ 5.395603] [drm] DMUB hardware initialized: version=0x0101002B
[ 5.534129] scsi 6:0:0:0: Direct-Access USBTC USBTC PQ: 0 ANSI: 6
[ 5.535497] sd 6:0:0:0: [sdb] 30720001 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 5.535828] sd 6:0:0:0: [sdb] Write Protect is off
[ 5.535832] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5.535989] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.551926] usb 1-9.1: New USB device found, idVendor=320f, idProduct=5046, bcdDevice= 0.07
[ 5.551930] usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.551933] usb 1-9.1: Product: GMMK Pro
[ 5.551936] usb 1-9.1: Manufacturer: USB HID
[ 5.582006] sdb: sdb1 sdb2
[ 5.582193] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.589140] input: USB HID GMMK Pro as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:320F:5046.0003/input/input3
[ 5.621198] [drm] kiq ring mec 2 pipe 1 q 0
[ 5.625310] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 5.625320] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 5.625432] amdgpu: Virtual CRAT table created for GPU
[ 5.625505] amdgpu: Topology: Add dGPU node [0x1638:0x1002]
[ 5.625507] kfd kfd: amdgpu: added device 1002:1638
[ 5.625516] amdgpu 0000:07:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 8
[ 5.625519] amdgpu 0000:07:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 5.625521] amdgpu 0000:07:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 5.625522] amdgpu 0000:07:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 5.625523] amdgpu 0000:07:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 5.625524] amdgpu 0000:07:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 5.625526] amdgpu 0000:07:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 5.625527] amdgpu 0000:07:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 5.625528] amdgpu 0000:07:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 5.625529] amdgpu 0000:07:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 5.625531] amdgpu 0000:07:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[ 5.625532] amdgpu 0000:07:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
[ 5.625533] amdgpu 0000:07:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
[ 5.625534] amdgpu 0000:07:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
[ 5.625536] amdgpu 0000:07:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
[ 5.625537] amdgpu 0000:07:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
[ 5.633468] amdgpu 0000:07:00.0: amdgpu: Runtime PM not available
[ 5.633725] [drm] Initialized amdgpu 3.58.0 for 0000:07:00.0 on minor 1
[ 5.640335] fbcon: amdgpudrmfb (fb0) is primary device
[ 5.640338] fbcon: Deferring console take-over
[ 5.640340] amdgpu 0000:07:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 5.783972] hid-generic 0003:320F:5046.0003: input,hidraw2: USB HID v1.11 Keyboard [USB HID GMMK Pro] on usb-0000:01:00.0-9.1/input0
[ 5.800585] input: USB HID GMMK Pro Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:320F:5046.0004/input/input5
[ 5.800712] input: USB HID GMMK Pro Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:320F:5046.0004/input/input6
[ 5.857343] input: USB HID GMMK Pro Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:320F:5046.0004/input/input8
[ 5.857462] hid-generic 0003:320F:5046.0004: input,hiddev97,hidraw3: USB HID v1.11 Mouse [USB HID GMMK Pro] on usb-0000:01:00.0-9.1/input1
[ 5.867386] hid-generic 0003:320F:5046.0005: hiddev98,hidraw4: USB HID v1.11 Device [USB HID GMMK Pro] on usb-0000:01:00.0-9.1/input2
[ 5.916547] BTRFS: device fsid 7cf30bbc-cfa9-4a81-98c1-f28a9160dc04 devid 1 transid 259521 /dev/nvme0n1p2 (259:2) scanned by mount (354)
[ 5.917172] BTRFS info (device nvme0n1p2): first mount of filesystem 7cf30bbc-cfa9-4a81-98c1-f28a9160dc04
[ 5.917193] BTRFS info (device nvme0n1p2): using crc32c (crc32c-intel) checksum algorithm
[ 5.917197] BTRFS info (device nvme0n1p2): using free-space-tree
[ 5.987039] systemd[1]: systemd 256.6-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 5.987043] systemd[1]: Detected architecture x86-64.
[ 5.987731] systemd[1]: Hostname set to <VampBook>.
[ 6.053615] usb 1-9.2: new full-speed USB device number 7 using xhci_hcd
[ 6.149467] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 6.278164] systemd[1]: Queued start job for default target Graphical Interface.
[ 6.318607] systemd[1]: Created slice Slice /system/dirmngr.
[ 6.318883] systemd[1]: Created slice Slice /system/getty.
[ 6.319130] systemd[1]: Created slice Slice /system/gpg-agent.
[ 6.319379] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 6.319634] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 6.319880] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 6.320132] systemd[1]: Created slice Slice /system/keyboxd.
[ 6.320474] systemd[1]: Created slice Slice /system/modprobe.
[ 6.320730] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 6.320917] systemd[1]: Created slice User and Session Slice.
[ 6.320964] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.321089] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.321102] systemd[1]: Expecting device /dev/disk/by-uuid/D782-2419...
[ 6.321112] systemd[1]: Reached target Login Prompts.
[ 6.321121] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 6.321133] systemd[1]: Reached target Remote File Systems.
[ 6.321139] systemd[1]: Reached target Slice Units.
[ 6.321147] systemd[1]: Reached target Swaps.
[ 6.321158] systemd[1]: Reached target Local Verity Protected Volumes.
[ 6.321207] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.321266] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.322760] systemd[1]: Listening on Process Core Dump Socket.
[ 6.323097] systemd[1]: Listening on Credential Encryption/Decryption.
[ 6.323160] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.323217] systemd[1]: Listening on Journal Sockets.
[ 6.323254] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.323263] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.323314] systemd[1]: Listening on udev Control Socket.
[ 6.323351] systemd[1]: Listening on udev Kernel Socket.
[ 6.324454] systemd[1]: Mounting Huge Pages File System...
[ 6.324938] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.325421] systemd[1]: Mounting Kernel Debug File System...
[ 6.325929] systemd[1]: Mounting Kernel Trace File System...
[ 6.326576] systemd[1]: Mounting Temporary Directory /tmp...
[ 6.327337] systemd[1]: Starting Create List of Static Device Nodes...
[ 6.327888] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.328444] systemd[1]: Starting Load Kernel Module configfs...
[ 6.328963] systemd[1]: Starting Load Kernel Module dm_mod...
[ 6.329656] systemd[1]: Starting Load Kernel Module drm...
[ 6.330232] systemd[1]: Starting Load Kernel Module fuse...
[ 6.330936] systemd[1]: Starting Load Kernel Module loop...
[ 6.330991] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 6.332191] systemd[1]: Starting Journal Service...
[ 6.333163] systemd[1]: Starting Load Kernel Modules...
[ 6.333172] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.333686] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.333716] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.334193] systemd[1]: Starting Load udev Rules from Credentials...
[ 6.334719] systemd[1]: Starting Coldplug All udev Devices...
[ 6.335228] systemd[1]: Starting Virtual Console Setup...
[ 6.337396] systemd[1]: Mounted Huge Pages File System.
[ 6.337464] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.337529] systemd[1]: Mounted Kernel Debug File System.
[ 6.337590] systemd[1]: Mounted Kernel Trace File System.
[ 6.337653] systemd[1]: Mounted Temporary Directory /tmp.
[ 6.337839] systemd[1]: Finished Create List of Static Device Nodes.
[ 6.338105] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 6.338204] loop: module loaded
[ 6.338258] systemd[1]: Finished Load Kernel Module configfs.
[ 6.338713] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 6.338842] systemd[1]: Finished Load Kernel Module drm.
[ 6.339028] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 6.339182] systemd[1]: Finished Load Kernel Module fuse.
[ 6.339380] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 6.339506] systemd[1]: Finished Load Kernel Module loop.
[ 6.340272] systemd[1]: Mounting FUSE Control File System...
[ 6.341001] device-mapper: uevent: version 1.0.3
[ 6.341069] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 6.348909] usb 1-9.2: not running at top speed; connect to a high speed hub
[ 6.366384] systemd[1]: Mounting Kernel Configuration File System...
[ 6.367199] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 6.367578] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 6.367753] systemd[1]: Finished Load Kernel Module dm_mod.
[ 6.368008] systemd[1]: Finished Load udev Rules from Credentials.
[ 6.368163] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 6.368519] systemd-journald[414]: Collecting audit messages is disabled.
[ 6.369952] i2c_dev: i2c /dev entries driver
[ 6.370543] systemd[1]: Mounted FUSE Control File System.
[ 6.370610] systemd[1]: Mounted Kernel Configuration File System.
[ 6.370909] usb 1-9.2: config 1 interface 2 altsetting 0 endpoint 0x5 has an invalid bInterval 0, changing to 10
[ 6.373246] Asymmetric key parser 'pkcs8' registered
[ 6.377398] sd 7:0:0:0: Attached scsi generic sg0 type 0
[ 6.377435] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.379366] systemd[1]: Finished Virtual Console Setup.
[ 6.385570] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 6.394907] usb 1-9.2: New USB device found, idVendor=2fc6, idProduct=f06a, bcdDevice=9c.ae
[ 6.394912] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.394914] usb 1-9.2: Product: MOONDROP Dawn Pro
[ 6.394916] usb 1-9.2: Manufacturer: MOONDROP
[ 6.394918] usb 1-9.2: SerialNumber: MOONDROP Dawn Pro
[ 6.411599] systemd[1]: Started Journal Service.
[ 6.454015] input: MOONDROP MOONDROP Dawn Pro as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.2/1-9.2:1.2/0003:2FC6:F06A.0006/input/input9
[ 6.463373] vboxdrv: loading out-of-tree module taints kernel.
[ 6.463376] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 6.471306] vboxdrv: Found 16 processor cores/threads
[ 6.493783] vboxdrv: TSC mode is Invariant, tentative frequency 3792869932 Hz
[ 6.493786] vboxdrv: Successfully loaded version 7.1.0 r164728 (interface 0x00340001)
[ 6.495206] VBoxNetAdp: Successfully started.
[ 6.496920] VBoxNetFlt: Successfully started.
[ 6.510352] hid-generic 0003:2FC6:F06A.0006: input,hidraw5: USB HID v1.11 Device [MOONDROP MOONDROP Dawn Pro] on usb-0000:01:00.0-9.2/input2
[ 6.530325] systemd-journald[414]: Received client request to flush runtime journal.
[ 6.701336] fbcon: Taking over console
[ 6.702609] [drm] DSC precompute is not needed.
[ 6.718440] ccp 0000:07:00.2: enabling device (0000 -> 0002)
[ 6.720033] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.720038] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 6.720377] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 6.720530] ccp 0000:07:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[ 6.721672] ccp 0000:07:00.2: tee enabled
[ 6.721752] ccp 0000:07:00.2: psp enabled
[ 6.723088] i2c i2c-3: Successfully instantiated SPD at 0x52
[ 6.723718] i2c i2c-3: Successfully instantiated SPD at 0x53
[ 6.723852] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.727223] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 6.727225] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.732433] cryptd: max_cpu_qlen set to 1000
[ 6.733903] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 6.733992] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 6.735417] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 6.747001] AES CTR mode by8 optimization enabled
[ 6.751899] ee1004 3-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 6.753565] ee1004 3-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 6.768032] snd_hda_intel 0000:07:00.1: enabling device (0000 -> 0002)
[ 6.768124] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
[ 6.775704] snd_hda_intel 0000:07:00.1: bound 0000:07:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.776484] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input11
[ 6.776537] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input12
[ 6.781578] Console: switching to colour frame buffer device 160x45
[ 6.816978] i8042: PNP: No PS/2 controller found.
[ 6.925256] mc: Linux media interface: v0.10
[ 6.929173] asus_wmi: ASUS WMI generic driver loaded
[ 6.932990] kvm_amd: TSC scaling supported
[ 6.932992] kvm_amd: Nested Virtualization enabled
[ 6.932993] kvm_amd: Nested Paging enabled
[ 6.932995] kvm_amd: LBR virtualization supported
[ 6.932998] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 6.932999] kvm_amd: Virtual GIF supported
[ 6.933159] asus_wmi: Initialization: 0x0
[ 6.933209] asus_wmi: BIOS WMI version: 0.9
[ 6.933522] asus_wmi: SFUN value: 0x0
[ 6.933526] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 6.937308] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
[ 7.109619] intel_rapl_common: Found RAPL domain package
[ 7.109624] intel_rapl_common: Found RAPL domain core
[ 7.109789] amd_atl: AMD Address Translation Library initialized
[ 7.115936] usb 1-9.2: 1:4 : unsupported format bits 0x100000000
[ 7.267119] usbcore: registered new interface driver snd-usb-audio
[ 7.293102] mousedev: PS/2 mouse device common for all mice
[ 7.319586] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.319713] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.319815] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 7.320371] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.320375] cfg80211: failed to load regulatory.db
[ 7.332825] r8169 0000:05:00.0 eth0: RTL8125B, e8:9c:25:a3:b1:f5, XID 641, IRQ 85
[ 7.332830] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 7.334543] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 7.411060] rtw89_8852be 0000:04:00.0: loaded firmware rtw89/rtw8852b_fw-1.bin
[ 7.411124] rtw89_8852be 0000:04:00.0: enabling device (0000 -> 0003)
[ 7.412391] rtw89_8852be 0000:04:00.0: Firmware version 0.29.29.5 (da87cccd), cmd version 0, type 5
[ 7.412394] rtw89_8852be 0000:04:00.0: Firmware version 0.29.29.5 (da87cccd), cmd version 0, type 3
[ 7.563331] BTRFS error (device nvme0n1p2): incorrect extent count for 32242663424; counted 10695, expected 10694
[ 7.930803] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[ 8.120698] r8169 0000:05:00.0 enp5s0: Link is Down
[ 9.142817] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ 9.142824] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ 9.142829] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ 9.142838] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 9.142853] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f55
[ 9.142867] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 9.142882] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f2f
[ 9.142896] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 9.142910] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ 9.142925] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 9.142939] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ 9.142953] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccdb
[ 9.142968] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ 9.142982] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccdb
[ 9.142997] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ 9.143011] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 9.143025] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ 9.143040] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ 10.864277] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ 10.864284] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ 10.864288] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ 10.864297] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ 10.864312] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ 10.864326] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f39
[ 10.864341] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ 10.864355] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 10.864370] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ 10.864384] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f7f
[ 10.864398] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 10.864413] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 10.864427] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f35
[ 10.864442] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 10.864456] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ 10.864470] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 10.864485] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ 10.864499] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 11.069002] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control off
[ 12.587161] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ 12.587169] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ 12.587173] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ 12.587182] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890dfdb
[ 12.587196] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ 12.587211] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f33
[ 12.587225] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ 12.587240] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 12.587254] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 12.587268] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ 12.587283] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 12.587297] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 12.587312] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ 12.587326] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ 12.587340] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 12.587355] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890dcd9
[ 12.587369] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f37
[ 12.587383] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890cce3
[ 14.303421] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ 14.303429] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ 14.303435] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ 14.303445] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f47
[ 14.303461] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890cce1
[ 14.303476] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ 14.303492] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3f
[ 14.303507] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ 14.303523] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ 14.303538] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ 14.303554] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ 14.303569] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f33
[ 14.303585] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4b
[ 14.303622] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3b
[ 14.303640] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f57
[ 14.303655] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f3d
[ 14.303671] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f2f
[ 14.303686] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4d
[ 16.015163] rtw89_8852be 0000:04:00.0: [ERR]FWDL path ready
[ 16.015170] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x1E0 = 0x23
[ 16.015175] rtw89_8852be 0000:04:00.0: [ERR]fwdl 0x83F0 = 0x70000
[ 16.015183] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015198] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015213] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015227] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f37
[ 16.015242] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015256] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f5f
[ 16.015270] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015285] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015299] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ 16.015313] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015328] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f4f
[ 16.015342] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015356] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f7f
[ 16.015371] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb890ccd9
[ 16.015385] rtw89_8852be 0000:04:00.0: [ERR]fw PC = 0xb8901f33
[ 16.015397] rtw89_8852be 0000:04:00.0: failed to setup chip information
[ 16.015945] rtw89_8852be 0000:04:00.0: probe with driver rtw89_8852be failed with error -110
[ 19.753626] BTRFS: device fsid 441c2692-2cb5-42d6-a37d-c0df8ed1c574 devid 1 transid 110371 /dev/sda (8:0) scanned by pool-udisksd (1009)
[ 19.754399] BTRFS info (device sda): first mount of filesystem 441c2692-2cb5-42d6-a37d-c0df8ed1c574
[ 19.754417] BTRFS info (device sda): using crc32c (crc32c-intel) checksum algorithm
[ 19.754422] BTRFS info (device sda): using free-space-tree
[ 29.422473] SUPR0GipMap: fGetGipCpu=0x3b
[ 30.271451] vboxdrv: 000000003e5b8526 VMMR0.r0
[ 30.432523] vboxdrv: 0000000058f6db64 VBoxDDR0.r0
[ 30.503134] VBoxNetFlt: attached to '4026531840/enp5s0' / e8:9c:25:a3:b1:f5
[ 30.583320] r8169 0000:05:00.0 enp5s0: entered promiscuous mode
[ 38.012774] systemd-journald[414]: Time jumped backwards, rotating.
[ 278.959047] sdb: sdb1 sdb2
[ 321.310570] usb 2-2: USB disconnect, device number 3
[ 331.527209] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd
[ 331.555752] usb 2-2: New USB device found, idVendor=04e8, idProduct=4001, bcdDevice= 1.00
[ 331.555758] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 331.555760] usb 2-2: Product: PSSD T7
[ 331.555762] usb 2-2: Manufacturer: Samsung
[ 331.555763] usb 2-2: SerialNumber: S6XJNS0W826012A
[ 331.608837] scsi host6: uas
[ 331.609307] scsi 6:0:0:0: Direct-Access Samsung PSSD T7 0 PQ: 0 ANSI: 6
[ 331.611335] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 332.461971] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 332.462099] sd 6:0:0:0: [sdb] Write Protect is off
[ 332.462102] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 332.462262] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 332.507747] sd 6:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 332.507752] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 332.530960] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 920.774940] usb 1-7.1: new high-speed USB device number 8 using xhci_hcd
[ 920.913340] usb 1-7.1: New USB device found, idVendor=194f, idProduct=010b, bcdDevice= 2.22
[ 920.913346] usb 1-7.1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 920.913349] usb 1-7.1: Product: Studio 68c
[ 920.913351] usb 1-7.1: Manufacturer: PreSonus
[ 920.913352] usb 1-7.1: SerialNumber: 01415A7A
[ 922.309680] usb 1-7.1: Quirk or no altset; falling back to MIDI 1.0
[ 1228.398269] BTRFS: device fsid 80ee18d0-351e-4c4e-94d7-b138bd47d747 devid 1 transid 5881 /dev/sdb (8:16) scanned by pool-udisksd (4558)
[ 1228.403178] BTRFS info (device sdb): first mount of filesystem 80ee18d0-351e-4c4e-94d7-b138bd47d747
[ 1228.403194] BTRFS info (device sdb): using crc32c (crc32c-intel) checksum algorithm
[ 1228.403198] BTRFS info (device sdb): using free-space-tree
[ 6195.929165] usb 1-9.2: USB disconnect, device number 7
[ 6349.734326] usb 1-9.2: new full-speed USB device number 9 using xhci_hcd
[ 6351.441026] usb 1-9.2: device descriptor read/64, error -32
[ 6351.812352] usb 1-9.2: not running at top speed; connect to a high speed hub
[ 6351.834369] usb 1-9.2: config 1 interface 2 altsetting 0 endpoint 0x5 has an invalid bInterval 0, changing to 10
[ 6351.858359] usb 1-9.2: New USB device found, idVendor=2fc6, idProduct=f06a, bcdDevice=9c.ae
[ 6351.858368] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6351.858370] usb 1-9.2: Product: MOONDROP Dawn Pro
[ 6351.858372] usb 1-9.2: Manufacturer: MOONDROP
[ 6351.858374] usb 1-9.2: SerialNumber: MOONDROP Dawn Pro
[ 6352.050336] usb 1-9.2: 1:4 : unsupported format bits 0x100000000
[ 6352.229951] input: MOONDROP MOONDROP Dawn Pro as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.2/1-9.2:1.2/0003:2FC6:F06A.0007/input/input14
[ 6352.284411] hid-generic 0003:2FC6:F06A.0007: input,hidraw5: USB HID v1.11 Device [MOONDROP MOONDROP Dawn Pro] on usb-0000:01:00.0-9.2/input2
[ 6910.671096] usb 1-7.1: USB disconnect, device number 8
[ 8689.835026] usb 1-9.2: USB disconnect, device number 9
[ 8973.744296] usb 1-9.2: new full-speed USB device number 10 using xhci_hcd
[ 8974.617678] usb 1-9.2: device descriptor read/64, error -32
[ 8975.364348] usb 1-9.2: device descriptor read/64, error -32
[ 8975.657625] usb 1-9.2: new full-speed USB device number 11 using xhci_hcd
[ 8975.948754] usb 1-9.2: not running at top speed; connect to a high speed hub
[ 8975.970754] usb 1-9.2: config 1 interface 2 altsetting 0 endpoint 0x5 has an invalid bInterval 0, changing to 10
[ 8975.994753] usb 1-9.2: New USB device found, idVendor=2fc6, idProduct=f06a, bcdDevice=9c.ae
[ 8975.994757] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8975.994759] usb 1-9.2: Product: MOONDROP Dawn Pro
[ 8975.994761] usb 1-9.2: Manufacturer: MOONDROP
[ 8975.994762] usb 1-9.2: SerialNumber: MOONDROP Dawn Pro
[ 8976.184754] usb 1-9.2: 1:4 : unsupported format bits 0x100000000
[ 8976.363891] input: MOONDROP MOONDROP Dawn Pro as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-9/1-9.2/1-9.2:1.2/0003:2FC6:F06A.0008/input/input15
[ 8976.417760] hid-generic 0003:2FC6:F06A.0008: input,hidraw5: USB HID v1.11 Device [MOONDROP MOONDROP Dawn Pro] on usb-0000:01:00.0-9.2/input2
[13475.243129] r8169 0000:05:00.0 enp5s0: left promiscuous mode
[13475.441425] vboxnetflt: 0 out of 884944 packets were not sent (directed to host)Offline
#4 2024-09-16 18:52:41
- gromit
- Package Maintainer (PM)
- From: Germany
- Registered: 2024-02-10
- Posts: 662
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Does the issue also exist on an untainted kernel (i.e. with the vboxdrv) module unloaded?
If the issue is still there after that, it might be a kernel a kernel regression, which should be bisected and reported to the upstream kernel developers
Are you confident to do the bisection on your own or do you need some help?
If you want we could also provide you with pre-built kernel images for you to test 
Good info to get you started is:
- https://docs.kernel.org/admin-guide/rep … sions.html
- https://wiki.archlinux.org/title/Kernel … egressions
In order for this to be bisectable properly it would need to be reproducible, but from your description it sounds like it is
Offline
#5 2024-09-17 05:37:03
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
I manually downloaded and built the 6.11 Kernel the oldshool way and the result is different
[ +0.000044] rtw89_8852be 0000:04:00.0: Direct firmware load for rtw89/rtw8852b_fw-1.bin failed with error -2
[ +0.000022] rtw89_8852be 0000:04:00.0: Direct firmware load for rtw89/rtw8852b_fw.bin failed with error -2
[ +0.000006] rtw89_8852be 0000:04:00.0: failed to early request firmware: -2
[ +0.000065] rtw89_8852be 0000:04:00.0: enabling device (0000 -> 0003)
[ +0.000915] rtw89_8852be 0000:04:00.0: Direct firmware load for rtw89/rtw8852b_fw.bin failed with error -2
[ +0.000144] rtw89_8852be 0000:04:00.0: failed to wait firmware completion
[ +0.000005] rtw89_8852be 0000:04:00.0: failed to setup chip information
[ +0.000295] rtw89_8852be 0000:04:00.0: probe with driver rtw89_8852be failed with error -22Which is correct, as this firmware file does not seem to exist in the /lib/firmware folder.
Does the firmware package maybe need an update? Will reboot and see which firmware the 6.10 Kernel uses
//Update: Nevermind, was on my side. I built it directly into the kernel instead of an module (which does not seem to work for everything that needs firmware on loading time).
Building it as a module results in being able to load the firmware but the exact same error. So an vanilla Kernel from kernel.org produces the same error, will report upstream
Last edited by Vamp898 (2024-09-17 05:42:53)
Offline
#6 2024-09-18 07:34:42
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
I already received a quick and dirty patch that does the job
diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c
index 02afeb3acce4..039fc329c6f7 100644
--- a/drivers/net/wireless/realtek/rtw89/pci.c
+++ b/drivers/net/wireless/realtek/rtw89/pci.c
@@ -3061,7 +3061,7 @@ static int rtw89_pci_setup_mapping(struct rtw89_dev *rtwdev,
goto err;
}
- ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
+ ret = -1;//dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
if (!ret) {
rtwpci->enable_dac = true;
rtw89_pci_cfg_dac(rtwdev);Offline
#7 2024-09-18 08:58:13
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
And here is the real patch: https://lore.kernel.org/linux-wireless/ … k.com/T/#u
Offline
#8 2024-09-21 10:48:11
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
By the way, as this patch is specific for my mainboard, they are discussing a better solution on how to fix this issue. But for now, at least if someone uses the same mainboard as me, this issue is... "workarounded"
Offline
#9 2024-09-24 05:33:04
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
New patch that properly address the issue
Offline
#10 2024-10-16 22:16:22
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,042
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
If it helps linux 6.11.3.arch1 with wifi-rtw89-pci-early-chips-only-enable-36-bit-DMA-on-specific-PCI-hosts.patch applied:
linux-6.11.3.arch1-1.1-x86_64.pkg.tar.zst/linux-headers-6.11.3.arch1-1.1-x86_64.pkg.tar.zst.
Offline
#11 2024-10-24 08:40:09
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Should this thread be moved into the stable section? 6.11 is in stable now^^
It was merged upstream by the way, but did not make it into 6.11.5, so probably will be fixed in 6.11.6
https://git.kernel.org/pub/scm/linux/ke … 725f222616
Last edited by Vamp898 (2024-10-24 08:44:50)
Offline
#12 2024-11-01 06:20:05
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Did not make it into 6.11.6 either...
Offline
#13 2024-11-01 09:03:26
- progandy
- Member
- Registered: 2012-05-17
- Posts: 5,259
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Vamp898 wrote:
Did not make it into 6.11.6 either...
It will be in v6.12-rc6
https://lore.kernel.org/lkml/2024103114 … edhat.com/
| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |
Offline
#14 2024-11-04 11:37:05
- gromit
- Package Maintainer (PM)
- From: Germany
- Registered: 2024-02-10
- Posts: 662
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
It also seems to be queued for the next stable release (6.11.7): https://git.kernel.org/pub/scm/linux/ke … a-on.patch
Offline
#15 2024-11-12 12:19:56
- Vamp898
- Member
- From: 東京
- Registered: 2009-01-03
- Posts: 922
- Website
Re: [SOLVED] Realtek RTL8852BE WiFi dead after 6.11 Upgrade
Marked at solved, did make it into the stable release
Last edited by Vamp898 (2024-11-12 12:20:04)
Offline