You are not logged in.
I've installed Arch from a usb to another usb for testing purposes. While I was in the installer, the internet connection was fine, but when i booted from the place, where arch has been installed, suddenly pacman throws `error: failed retrieving file 'core.db' from ***: Could not resolve host: *`
I've already tried solving it but I made it only to make WAN lights blink and nothing to happen. Also i'm first time here and i don't know what to send.
Last edited by 4004cic (2024-11-10 14:29:30)
Offline
What did you install to configure your network and how did you configure it?
https://wiki.archlinux.org/title/Instal … l_packages
Online
I downloaded .iso from https://archlinux.org/download/ (yandex.ru mirror) ...x86_64.iso (there is nothing in between 64 and .iso!) and configured it through archinstall command. From the installer drive, I configured it to have the b formatting (i dont remember its name) and that's all. I also installed a few drivers and MATE graphical part and nothing with the actual internet part
In short: it was coming like this out of the .iso.
Offline
configured it through archinstall command … nothing with the actual internet part
Please read https://wiki.archlinux.org/title/Archinstall (all the warnings and all the notes) and post the outputs of
find /etc/systemd -type l -exec test -f {} \; -print | awk -F'/' '{ printf ("%-40s | %s\n", $(NF-0), $(NF-1)) }' | sort -f
ip a
Online
Mod note: moving to Archinstall subforum.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
will send it later since I'm not on the computer now (approx. 6-8h)
Offline
Please do not 'empty post'.
https://wiki.archlinux.org/title/Genera … mpty_posts
The forums are asynchronous. You do not need to give us a live update of your inability to provide logs, just return when you are able to provide the logs and post an update then.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
Here are the results of the commands: https://i.imgur.com/6D1szu5.jpeg
Offline
You've a wired NIC w/ a carrier but no network service is running, ie. whatever else you did during the configuration, you didn't enable one.
See what's there
pacman -Qs 'net|dhcp'
for what was maybe installed and then see the wiki and configure one, https://wiki.archlinux.org/title/Networ … management
Online
Here is what the pacman -Qs says.
https://i.imgur.com/8B4PtrA.jpeg
Offline
Can you read that? Cause I can't.
It also doesns't matter - you're supposed t o check what network config services you intalled and then use one of them to obtain a lease.
Online
Oh sorry, did not notice. Here is the fixed version of a screenshot: https://i.imgur.com/qeQwgFh.jpeg
Offline
"rien" - boot the install iso, chroot into the system and install and enabled eg. dhcpcd.
A better approach would be to re-install arch and actually work through the official installation guide so you end up w/ a system that you actually know and understand.
Online
"rien" - boot the install iso, chroot into the system and install and enabled eg. dhcpcd.
Without using the install iso, you should be able to set up systemd-networkd with its dhcp client
https://wiki.archlinux.org/title/Systemd-networkd
| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |
Offline
hello again, thanks to seth i installed dhcpcd and fixed it with making a script that looks like this:
killall dhcpcd (if the service is running)
ip a (checking for the interfaces)
dhcpcd
iwconfig
dhcpcd --release enp4s0
dhcpcd enp4s0
ip link set enp4s0 up
Offline
You don't need any of this nonsense, enabling the service will do, https://wiki.archlinux.org/title/Dhcpcd#Running
Get used to consult the wiki and please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
Online