You are not logged in.

Pages: 1

#1 2024-11-11 10:57:58

Vertennn
Member
Registered: 2024-11-10
Posts: 13

[SOLVED] Several Hardware MCE Errors

I would like to understand what Hardware Error messages mean. I am aware that adding mce=nobootlog to /etc/default/grub is an option, but I would prefer to fix the issue if possible. I have updated the BIOS to the latest version and have installed intel-ucode (more information about my CPU is provided below). I have also read that undervolting or overclocking could be the cause, but I don't remember ever doing that. Does anyone have any idea what could be the cause of this error?

dmesg | grep -i error

[    0.353916] mce: [Hardware Error]: Machine check events logged
[    0.353916] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee0000000040110a
[    0.353918] mce: [Hardware Error]: TSC 0 ADDR fef19000 MISC 388000c086 
[    0.353920] mce: [Hardware Error]: PROCESSOR 0:a0653 TIME 1731321208 SOCKET 0 APIC 0 microcode fc
[    0.362464] RAS: Correctable Errors collector initialized.

dmesg | grep microcode

[    0.353901] microcode: Current revision: 0x000000fc
[    0.353903] microcode: Updated early from: 0x000000f6
[    0.353920] mce: [Hardware Error]: PROCESSOR 0:a0653 TIME 1731321208 SOCKET 0 APIC 0 microcode fc

lscpu

Architecture:             x86_64
  CPU op-mode(s):         32-bit, 64-bit
  Address sizes:          39 bits physical, 48 bits virtual
  Byte Order:             Little Endian
CPU(s):                   12
  On-line CPU(s) list:    0-11
Vendor ID:                GenuineIntel
  BIOS Vendor ID:         Intel(R) Corporation
  Model name:             Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz
    BIOS Model name:      Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz To Be Filled By O.E.M. CPU @ 3.1GHz
    BIOS CPU family:      205
    CPU family:           6
    Model:                165
    Thread(s) per core:   2
    Core(s) per socket:   6
    Socket(s):            1
    Stepping:             3
    CPU(s) scaling MHz:   39%
    CPU max MHz:          4300.0000
    CPU min MHz:          800.0000
    BogoMIPS:             5799.77
    Flags:                fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc
                           art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pci
                          d sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr
                          _shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves 
                          dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp vnmi md_clear flush_l1d arch_capabilities
Virtualization features:  
  Virtualization:         VT-x
Caches (sum of all):      
  L1d:                    192 KiB (6 instances)
  L1i:                    192 KiB (6 instances)
  L2:                     1.5 MiB (6 instances)
  L3:                     12 MiB (1 instance)
NUMA:                     
  NUMA node(s):           1
  NUMA node0 CPU(s):      0-11
Vulnerabilities:          
  Gather data sampling:   Mitigation; Microcode
  Itlb multihit:          KVM: Mitigation: VMX disabled
  L1tf:                   Not affected
  Mds:                    Not affected
  Meltdown:               Not affected
  Mmio stale data:        Mitigation; Clear CPU buffers; SMT vulnerable
  Reg file data sampling: Not affected
  Retbleed:               Mitigation; Enhanced IBRS
  Spec rstack overflow:   Not affected
  Spec store bypass:      Mitigation; Speculative Store Bypass disabled via prctl
  Spectre v1:             Mitigation; usercopy/swapgs barriers and __user pointer sanitization
  Spectre v2:             Mitigation; Enhanced / Automatic IBRS; IBPB conditional; RSB filling; PBRSB-eIBRS SW sequence; BHI SW loop, KVM SW loop
  Srbds:                  Mitigation; Microcode
  Tsx async abort:        Not affected

EDIT: Since I didn't receive a quick response, I am marking my post as SOLVED, even though I haven't found a satisfactory solution for myself. I decided to go with the mce=nobootlog option because the system boots correctly and I haven't noticed any major errors. I have spent enough time trying to find the cause, but unfortunately without success, as the solution on the Internet is not clear.

Last edited by Vertennn (2024-11-12 18:27:17)

Offline

#2 2024-11-11 12:26:06

gromit
Package Maintainer (PM)
From: Germany
Registered: 2024-02-10
Posts: 770
Website

Re: [SOLVED] Several Hardware MCE Errors

Could you post the full dmesg so we could have some context?

Offline

#3 2024-11-11 12:27:59

ugjka
Member
From: Latvia
Registered: 2014-04-01
Posts: 1,863
Website

Re: [SOLVED] Several Hardware MCE Errors

Can you check that your cpu is not one of those Intel one's that can fry themselves overtime

https://ugjka.net
paru > yay | vesktop > discord
pacman -S spotify-launcher
mount /dev/disk/by-...

Offline

#4 2024-11-11 13:05:37

Vertennn
Member
Registered: 2024-11-10
Posts: 13

Re: [SOLVED] Several Hardware MCE Errors

gromit wrote:

Could you post the full dmesg so we could have some context?

Sure, that's all.

[    0.000000] Linux version 6.11.6-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 14.2.1 20240910, GNU ld (GNU Binutils) 2.43.0) #1 ZEN SMP PREEMPT_DYNAMIC Fri, 01 Nov 2024 03:30:35 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-zen root=/dev/mapper/volgroup0-lv_root rw quiet loglevel=0 nosgx pcie_aspm=off
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000091d77fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000091d78000-0x0000000099392fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099393000-0x0000000099612fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000099613000-0x0000000099712fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000099713000-0x0000000099efefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099eff000-0x0000000099efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099f00000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x89dfa018-0x89e1e657] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000089dfa017] usable
[    0.000000] reserve setup_data: [mem 0x0000000089dfa018-0x0000000089e1e657] usable
[    0.000000] reserve setup_data: [mem 0x0000000089e1e658-0x0000000091d77fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000091d78000-0x0000000099392fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000099393000-0x0000000099612fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000099613000-0x0000000099712fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000099713000-0x0000000099efefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000099eff000-0x0000000099efffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000099f00000-0x000000009fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045bffffff] usable
[    0.000000] efi: EFI v2.7 by American Megatrends
[    0.000000] efi: ACPI=0x99612000 ACPI 2.0=0x99612014 TPMFinalLog=0x9967d000 SMBIOS=0x99c44000 SMBIOS 3.0=0x99c43000 MEMATTR=0x8af7c298 ESRT=0x8ad82e98 INITRD=0x8ad65b18 RNG=0x99546018 TPMEventLog=0x99545018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem62: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem63: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem64: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem65: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem66: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem67: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: LENOVO 90RE00HUPB/3730, BIOS M3GKT40A 05/24/2024
[    0.000000] DMI: Memory slots populated: 2/2
[    0.000000] tsc: Detected 2900.000 MHz processor
[    0.000000] tsc: Detected 2899.886 MHz TSC
[    0.000372] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000374] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000380] last_pfn = 0x45c000 max_arch_pfn = 0x400000000
[    0.000384] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000385] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000665] last_pfn = 0x99f00 max_arch_pfn = 0x400000000
[    0.006139] esrt: Reserving ESRT space from 0x000000008ad82e98 to 0x000000008ad82f98.
[    0.006143] e820: update [mem 0x8ad82000-0x8ad82fff] usable ==> reserved
[    0.006156] Using GB pages for direct mapping
[    0.006384] Secure boot disabled
[    0.006384] RAMDISK: [mem 0x843c9000-0x88179fff]
[    0.006458] ACPI: Early table checksum verification disabled
[    0.006460] ACPI: RSDP 0x0000000099612014 000024 (v02 LENOVO)
[    0.006463] ACPI: XSDT 0x0000000099611728 00010C (v01 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006467] ACPI: FACP 0x0000000099608000 000114 (v06 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006471] ACPI: DSDT 0x00000000995AA000 05D51A (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006473] ACPI: FACS 0x0000000099710000 000040
[    0.006475] ACPI: MCFG 0x0000000099610000 00003C (v01 LENOVO TC-M3G   00001400 MSFT 00000097)
[    0.006477] ACPI: SSDT 0x0000000099609000 0066CB (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006479] ACPI: FIDT 0x00000000995A9000 00009C (v01 LENOVO TC-M3G   00001400 AMI  00010013)
[    0.006481] ACPI: SSDT 0x00000000995A8000 0003A4 (v01 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006483] ACPI: SSDT 0x00000000995A5000 0025FA (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006485] ACPI: SSDT 0x00000000995A0000 004419 (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006487] ACPI: SSDT 0x000000009959C000 0032CD (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006489] ACPI: HPET 0x000000009959B000 000038 (v01 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006490] ACPI: APIC 0x000000009959A000 000164 (v04 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006492] ACPI: SSDT 0x0000000099599000 000E66 (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006494] ACPI: SSDT 0x0000000099598000 000F3F (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006496] ACPI: NHLT 0x0000000099596000 0017F1 (v00 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006498] ACPI: SSDT 0x0000000099593000 00229F (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006500] ACPI: LPIT 0x0000000099592000 0000CC (v01 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006502] ACPI: SSDT 0x000000009958E000 002720 (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006504] ACPI: SSDT 0x000000009958D000 000B52 (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006506] ACPI: DBGP 0x000000009958C000 000034 (v01 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006508] ACPI: DBG2 0x000000009958B000 000054 (v00 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006510] ACPI: SSDT 0x0000000099589000 0015B7 (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006512] ACPI: DMAR 0x0000000099588000 000050 (v02 LENOVO TC-M3G   00001400      01000013)
[    0.006514] ACPI: FPDT 0x0000000099587000 000044 (v01 LENOVO TC-M3G   00001400 AMI  01000013)
[    0.006516] ACPI: SSDT 0x0000000099586000 000144 (v02 LENOVO TC-M3G   00001400 INTL 20180209)
[    0.006518] ACPI: BGRT 0x0000000099585000 000038 (v01 LENOVO TC-M3G   00001400 AMI  00010013)
[    0.006520] ACPI: LUFT 0x0000000099550000 034CC2 (v01 LENOVO TC-M3G   00001400 AMI  00010013)
[    0.006522] ACPI: WPBT 0x0000000099549000 000034 (v01 LENOVO TC-M3G   00000001 AMI  00010013)
[    0.006524] ACPI: TPM2 0x0000000099548000 00004C (v04 LENOVO TC-M3G   00001400 AMI  00000000)
[    0.006526] ACPI: PTDT 0x0000000099547000 000024 (v00 LENOVO TC-M3G   00001400 MSFT 0100000D)
[    0.006528] ACPI: WSMT 0x0000000099591000 000028 (v01 LENOVO TC-M3G   00001400 AMI  00010013)
[    0.006530] ACPI: Reserving FACP table memory at [mem 0x99608000-0x99608113]
[    0.006531] ACPI: Reserving DSDT table memory at [mem 0x995aa000-0x99607519]
[    0.006531] ACPI: Reserving FACS table memory at [mem 0x99710000-0x9971003f]
[    0.006532] ACPI: Reserving MCFG table memory at [mem 0x99610000-0x9961003b]
[    0.006532] ACPI: Reserving SSDT table memory at [mem 0x99609000-0x9960f6ca]
[    0.006533] ACPI: Reserving FIDT table memory at [mem 0x995a9000-0x995a909b]
[    0.006533] ACPI: Reserving SSDT table memory at [mem 0x995a8000-0x995a83a3]
[    0.006534] ACPI: Reserving SSDT table memory at [mem 0x995a5000-0x995a75f9]
[    0.006535] ACPI: Reserving SSDT table memory at [mem 0x995a0000-0x995a4418]
[    0.006535] ACPI: Reserving SSDT table memory at [mem 0x9959c000-0x9959f2cc]
[    0.006536] ACPI: Reserving HPET table memory at [mem 0x9959b000-0x9959b037]
[    0.006536] ACPI: Reserving APIC table memory at [mem 0x9959a000-0x9959a163]
[    0.006537] ACPI: Reserving SSDT table memory at [mem 0x99599000-0x99599e65]
[    0.006538] ACPI: Reserving SSDT table memory at [mem 0x99598000-0x99598f3e]
[    0.006538] ACPI: Reserving NHLT table memory at [mem 0x99596000-0x995977f0]
[    0.006539] ACPI: Reserving SSDT table memory at [mem 0x99593000-0x9959529e]
[    0.006539] ACPI: Reserving LPIT table memory at [mem 0x99592000-0x995920cb]
[    0.006540] ACPI: Reserving SSDT table memory at [mem 0x9958e000-0x9959071f]
[    0.006540] ACPI: Reserving SSDT table memory at [mem 0x9958d000-0x9958db51]
[    0.006541] ACPI: Reserving DBGP table memory at [mem 0x9958c000-0x9958c033]
[    0.006542] ACPI: Reserving DBG2 table memory at [mem 0x9958b000-0x9958b053]
[    0.006542] ACPI: Reserving SSDT table memory at [mem 0x99589000-0x9958a5b6]
[    0.006543] ACPI: Reserving DMAR table memory at [mem 0x99588000-0x9958804f]
[    0.006543] ACPI: Reserving FPDT table memory at [mem 0x99587000-0x99587043]
[    0.006544] ACPI: Reserving SSDT table memory at [mem 0x99586000-0x99586143]
[    0.006545] ACPI: Reserving BGRT table memory at [mem 0x99585000-0x99585037]
[    0.006545] ACPI: Reserving LUFT table memory at [mem 0x99550000-0x99584cc1]
[    0.006546] ACPI: Reserving WPBT table memory at [mem 0x99549000-0x99549033]
[    0.006546] ACPI: Reserving TPM2 table memory at [mem 0x99548000-0x9954804b]
[    0.006547] ACPI: Reserving PTDT table memory at [mem 0x99547000-0x99547023]
[    0.006548] ACPI: Reserving WSMT table memory at [mem 0x99591000-0x99591027]
[    0.006687] No NUMA configuration found
[    0.006687] Faking a node at [mem 0x0000000000000000-0x000000045bffffff]
[    0.006690] NODE_DATA(0) allocated [mem 0x45bffb000-0x45bffffff]
[    0.006713] Zone ranges:
[    0.006713]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006714]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006715]   Normal   [mem 0x0000000100000000-0x000000045bffffff]
[    0.006717]   Device   empty
[    0.006717] Movable zone start for each node
[    0.006718] Early memory node ranges
[    0.006718]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.006719]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.006720]   node   0: [mem 0x0000000000100000-0x0000000091d77fff]
[    0.006721]   node   0: [mem 0x0000000099eff000-0x0000000099efffff]
[    0.006721]   node   0: [mem 0x0000000100000000-0x000000045bffffff]
[    0.006723] Initmem setup node 0 [mem 0x0000000000001000-0x000000045bffffff]
[    0.006726] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006728] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006742] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.009486] On node 0, zone DMA32: 33159 pages in unavailable ranges
[    0.025569] On node 0, zone Normal: 24832 pages in unavailable ranges
[    0.025691] On node 0, zone Normal: 16384 pages in unavailable ranges
[    0.026163] ACPI: PM-Timer IO Port: 0x1808
[    0.026169] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.026170] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.026171] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.026172] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.026172] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.026173] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.026173] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.026174] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.026174] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.026175] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.026175] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.026176] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.026176] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.026177] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.026178] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.026178] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.026179] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.026179] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.026180] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.026180] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.026215] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.026217] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.026218] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.026221] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.026222] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.026227] e820: update [mem 0x8a3f1000-0x8a439fff] usable ==> reserved
[    0.026236] TSC deadline timer available
[    0.026239] CPU topo: Max. logical packages:   1
[    0.026240] CPU topo: Max. logical dies:       1
[    0.026240] CPU topo: Max. dies per package:   1
[    0.026244] CPU topo: Max. threads per core:   2
[    0.026244] CPU topo: Num. cores per package:     6
[    0.026245] CPU topo: Num. threads per package:  12
[    0.026245] CPU topo: Allowing 12 present CPUs plus 0 hotplug CPUs
[    0.026256] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.026257] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.026258] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.026260] PM: hibernation: Registered nosave memory: [mem 0x89dfa000-0x89dfafff]
[    0.026261] PM: hibernation: Registered nosave memory: [mem 0x89e1e000-0x89e1efff]
[    0.026262] PM: hibernation: Registered nosave memory: [mem 0x8a3f1000-0x8a439fff]
[    0.026263] PM: hibernation: Registered nosave memory: [mem 0x8ad82000-0x8ad82fff]
[    0.026264] PM: hibernation: Registered nosave memory: [mem 0x91d78000-0x99392fff]
[    0.026264] PM: hibernation: Registered nosave memory: [mem 0x99393000-0x99612fff]
[    0.026265] PM: hibernation: Registered nosave memory: [mem 0x99613000-0x99712fff]
[    0.026266] PM: hibernation: Registered nosave memory: [mem 0x99713000-0x99efefff]
[    0.026267] PM: hibernation: Registered nosave memory: [mem 0x99f00000-0x9fffffff]
[    0.026267] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xfdffffff]
[    0.026268] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.026268] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.026269] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.026269] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.026270] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.026270] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.026271] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.026271] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.026272] [mem 0xa0000000-0xfdffffff] available for PCI devices
[    0.026273] Booting paravirtualized kernel on bare hardware
[    0.026275] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.031039] setup_percpu: NR_CPUS:320 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[    0.031606] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.031611] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.031613] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
[    0.031617] pcpu-alloc: [0] 08 09 10 11 
[    0.031628] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=/dev/mapper/volgroup0-lv_root rw quiet loglevel=0 nosgx pcie_aspm=off
[    0.031688] PCIe ASPM is disabled
[    0.031690] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-zen", will be passed to user space.
[    0.032875] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.033474] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.033574] Fallback order for Node 0: 0 
[    0.033577] Built 1 zonelists, mobility grouping on.  Total pages: 4119831
[    0.033577] Policy zone: Normal
[    0.033747] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.033753] software IO TLB: area num 16.
[    0.072302] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.072337] ftrace: allocating 48405 entries in 190 pages
[    0.078631] ftrace: allocated 190 pages with 6 groups
[    0.078688] Dynamic Preempt: full
[    0.078728] rcu: Preemptible hierarchical RCU implementation.
[    0.078728] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[    0.078729] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.078730] 	Trampoline variant of Tasks RCU enabled.
[    0.078730] 	Rude variant of Tasks RCU enabled.
[    0.078731] 	Tracing variant of Tasks RCU enabled.
[    0.078731] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.078732] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.078739] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[    0.078740] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[    0.078741] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[    0.082055] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[    0.082380] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.082551] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.082576] Console: colour dummy device 80x25
[    0.082577] printk: legacy console [tty0] enabled
[    0.082616] ACPI: Core revision 20240322
[    0.082908] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.082909] APIC: Switch to symmetric I/O mode setup
[    0.082910] DMAR: Host address width 39
[    0.082911] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.082915] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.082918] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 0
[    0.082919] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.082920] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.084404] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.084406] x2apic enabled
[    0.084460] APIC: Switched APIC routing to: cluster x2apic
[    0.088542] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[    0.088547] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=2899886)
[    0.088566] CPU0: Thermal monitoring enabled (TM1)
[    0.088602] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.088602] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.088604] process: using mwait in idle threads
[    0.088606] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.088608] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
[    0.088608] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.088609] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.088609] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.088610] RETBleed: Mitigation: Enhanced IBRS
[    0.088611] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.088612] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.088615] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.088616] SRBDS: Mitigation: Microcode
[    0.088617] GDS: Mitigation: Microcode
[    0.088621] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.088622] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.088623] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.088623] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.088624] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.088625] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.088626] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.088626] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.088627] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.089545] Freeing SMP alternatives memory: 52K
[    0.089545] pid_max: default: 32768 minimum: 301
[    0.089545] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.089545] landlock: Up and running.
[    0.089545] Yama: becoming mindful.
[    0.089545] LSM support for eBPF active
[    0.089545] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.089545] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.089545] smpboot: CPU0: Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x3)
[    0.089545] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.089545] ... version:                4
[    0.089545] ... bit width:              48
[    0.089545] ... generic registers:      4
[    0.089545] ... value mask:             0000ffffffffffff
[    0.089545] ... max period:             00007fffffffffff
[    0.089545] ... fixed-purpose events:   3
[    0.089545] ... event mask:             000000070000000f
[    0.089545] signal: max sigframe size: 2032
[    0.089545] Estimated ratio of average max frequency by base frequency (times 1024): 1447
[    0.089568] rcu: Hierarchical SRCU implementation.
[    0.089569] rcu: 	Max phase no-delay instances is 400.
[    0.089597] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.090020] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.090081] smp: Bringing up secondary CPUs ...
[    0.090132] smpboot: x86: Booting SMP configuration:
[    0.090132] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.094001] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.094569] smp: Brought up 1 node, 12 CPUs
[    0.094569] smpboot: Total of 12 processors activated (69597.26 BogoMIPS)
[    0.095607] Memory: 15989276K/16479324K available (20480K kernel code, 2206K rwdata, 13364K rodata, 3592K init, 3116K bss, 472120K reserved, 0K cma-reserved)
[    0.095943] devtmpfs: initialized
[    0.095943] x86/mm: Memory block size: 128MB
[    0.096885] ACPI: PM: Registering ACPI NVS region [mem 0x99613000-0x99712fff] (1048576 bytes)
[    0.096885] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.096885] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.096885] pinctrl core: initialized pinctrl subsystem
[    0.096885] PM: RTC time: 12:58:00, date: 2024-11-11
[    0.097126] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.097654] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.097737] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.097819] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.097825] audit: initializing netlink subsys (disabled)
[    0.097829] audit: type=2000 audit(1731329880.009:1): state=initialized audit_enabled=0 res=1
[    0.097829] thermal_sys: Registered thermal governor 'fair_share'
[    0.097829] thermal_sys: Registered thermal governor 'bang_bang'
[    0.097829] thermal_sys: Registered thermal governor 'step_wise'
[    0.097829] thermal_sys: Registered thermal governor 'user_space'
[    0.097829] thermal_sys: Registered thermal governor 'power_allocator'
[    0.097829] cpuidle: using governor ladder
[    0.097829] cpuidle: using governor menu
[    0.097829] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.097829] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.097829] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.097829] PCI: Using configuration type 1 for base access
[    0.097829] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.097829] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.097829] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.097829] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.097829] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.097829] ACPI: Added _OSI(Module Device)
[    0.097829] ACPI: Added _OSI(Processor Device)
[    0.097829] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.097829] ACPI: Added _OSI(Processor Aggregator Device)
[    0.147221] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0], AE_NOT_FOUND (20240322/dswload2-162)
[    0.147226] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240322/psobject-220)
[    0.147228] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[    0.154010] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.159902] ACPI: Dynamic OEM Table Load:
[    0.159908] ACPI: SSDT 0xFFFF985640DFFC00 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20180209)
[    0.161136] ACPI: Dynamic OEM Table Load:
[    0.161141] ACPI: SSDT 0xFFFF985640DF2800 0005E4 (v02 PmRef  Cpu0Ist  00003000 INTL 20180209)
[    0.162005] ACPI: Dynamic OEM Table Load:
[    0.162009] ACPI: SSDT 0xFFFF9856419CEA00 0001CB (v02 PmRef  Cpu0Psd  00003000 INTL 20180209)
[    0.162778] ACPI: Dynamic OEM Table Load:
[    0.162783] ACPI: SSDT 0xFFFF985640DF9400 000278 (v02 PmRef  Cpu0Hwp  00003000 INTL 20180209)
[    0.163745] ACPI: Dynamic OEM Table Load:
[    0.163751] ACPI: SSDT 0xFFFF985640E05000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20180209)
[    0.164696] ACPI: Dynamic OEM Table Load:
[    0.164701] ACPI: SSDT 0xFFFF985640DF5800 00048A (v02 PmRef  ApHwp    00003000 INTL 20180209)
[    0.165572] ACPI: Dynamic OEM Table Load:
[    0.165576] ACPI: SSDT 0xFFFF985640DF3000 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20180209)
[    0.166442] ACPI: Dynamic OEM Table Load:
[    0.166446] ACPI: SSDT 0xFFFF985640DF6800 00048A (v02 PmRef  ApCst    00003000 INTL 20180209)
[    0.171895] ACPI: EC: EC started
[    0.171896] ACPI: EC: interrupt blocked
[    0.172463] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.172465] ACPI: \_SB_.PC00.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    0.172466] ACPI: Interpreter enabled
[    0.172503] ACPI: PM: (supports S0 S3 S4 S5)
[    0.172504] ACPI: Using IOAPIC for interrupt routing
[    0.173607] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.173609] PCI: Ignoring E820 reservations for host bridge windows
[    0.175289] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.202669] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.202862] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
[    0.202963] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
[    0.203060] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
[    0.213681] ACPI: \_TZ_.FN00: New power resource
[    0.213731] ACPI: \_TZ_.FN01: New power resource
[    0.213777] ACPI: \_TZ_.FN02: New power resource
[    0.213822] ACPI: \_TZ_.FN03: New power resource
[    0.213867] ACPI: \_TZ_.FN04: New power resource
[    0.214302] ACPI: \PIN_: New power resource
[    0.214831] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[    0.214836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    0.214837] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.214910] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.216181] PCI host bridge to bus 0000:00
[    0.216184] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.216186] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.216187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.216188] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.216189] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.216190] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.216191] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.216345] pci 0000:00:00.0: [8086:9b53] type 00 class 0x060000 conventional PCI endpoint
[    0.216411] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[    0.216421] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.216423] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.216424] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa10fffff]
[    0.216428] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.216447] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.216869] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[    0.216876] pci 0000:00:04.0: BAR 0 [mem 0x4012110000-0x4012117fff 64bit]
[    0.217107] pci 0000:00:14.0: [8086:43ed] type 00 class 0x0c0330 conventional PCI endpoint
[    0.217121] pci 0000:00:14.0: BAR 0 [mem 0x4012100000-0x401210ffff 64bit]
[    0.217175] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.218583] pci 0000:00:14.2: [8086:43ef] type 00 class 0x050000 conventional PCI endpoint
[    0.218599] pci 0000:00:14.2: BAR 0 [mem 0x401211c000-0x401211ffff 64bit]
[    0.218609] pci 0000:00:14.2: BAR 2 [mem 0x4012124000-0x4012124fff 64bit]
[    0.218793] pci 0000:00:15.0: [8086:43e8] type 00 class 0x0c8000 conventional PCI endpoint
[    0.218813] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.219062] pci 0000:00:15.2: [8086:43ea] type 00 class 0x0c8000 conventional PCI endpoint
[    0.219082] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.219387] pci 0000:00:16.0: [8086:43e0] type 00 class 0x078000 conventional PCI endpoint
[    0.219408] pci 0000:00:16.0: BAR 0 [mem 0x4012121000-0x4012121fff 64bit]
[    0.219483] pci 0000:00:16.0: PME# supported from D3hot
[    0.219886] pci 0000:00:17.0: [8086:43d2] type 00 class 0x010601 conventional PCI endpoint
[    0.219897] pci 0000:00:17.0: BAR 0 [mem 0xa1300000-0xa1301fff]
[    0.219903] pci 0000:00:17.0: BAR 1 [mem 0xa1303000-0xa13030ff]
[    0.219909] pci 0000:00:17.0: BAR 2 [io  0x5050-0x5057]
[    0.219914] pci 0000:00:17.0: BAR 3 [io  0x5040-0x5043]
[    0.219920] pci 0000:00:17.0: BAR 4 [io  0x5020-0x503f]
[    0.219926] pci 0000:00:17.0: BAR 5 [mem 0xa1302000-0xa13027ff]
[    0.219957] pci 0000:00:17.0: PME# supported from D3hot
[    0.220404] pci 0000:00:1b.0: [8086:43c4] type 01 class 0x060400 PCIe Root Port
[    0.220426] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.220431] pci 0000:00:1b.0:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.220498] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.220529] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
[    0.221150] pci 0000:00:1c.0: [8086:43bd] type 01 class 0x060400 PCIe Root Port
[    0.221172] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.221175] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.221178] pci 0000:00:1c.0:   bridge window [mem 0xa1100000-0xa11fffff]
[    0.221245] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.221276] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[    0.221897] pci 0000:00:1f.0: [8086:4387] type 00 class 0x060100 conventional PCI endpoint
[    0.222180] pci 0000:00:1f.3: [8086:f0c8] type 00 class 0x040300 conventional PCI endpoint
[    0.222203] pci 0000:00:1f.3: BAR 0 [mem 0x4012118000-0x401211bfff 64bit]
[    0.222232] pci 0000:00:1f.3: BAR 4 [mem 0x4012000000-0x40120fffff 64bit]
[    0.222290] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.222712] pci 0000:00:1f.4: [8086:43a3] type 00 class 0x0c0500 conventional PCI endpoint
[    0.222731] pci 0000:00:1f.4: BAR 0 [mem 0x4012120000-0x40121200ff 64bit]
[    0.222752] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.222949] pci 0000:00:1f.5: [8086:43a4] type 00 class 0x0c8000 conventional PCI endpoint
[    0.222964] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.223077] pci 0000:01:00.0: [10de:2504] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.223084] pci 0000:01:00.0: BAR 0 [mem 0xa0000000-0xa0ffffff]
[    0.223090] pci 0000:01:00.0: BAR 1 [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.223096] pci 0000:01:00.0: BAR 3 [mem 0x4010000000-0x4011ffffff 64bit pref]
[    0.223100] pci 0000:01:00.0: BAR 5 [io  0x4000-0x407f]
[    0.223103] pci 0000:01:00.0: ROM [mem 0xa1000000-0xa107ffff pref]
[    0.223119] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.223143] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.223181] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.223248] pci 0000:01:00.1: [10de:228e] type 00 class 0x040300 PCIe Endpoint
[    0.223254] pci 0000:01:00.1: BAR 0 [mem 0xa1080000-0xa1083fff]
[    0.223323] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.223562] pci 0000:02:00.0: [1e0f:000c] type 00 class 0x010802 PCIe Endpoint
[    0.223581] pci 0000:02:00.0: BAR 0 [mem 0xa1200000-0xa1203fff 64bit]
[    0.223775] pci 0000:02:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:1b.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    0.223866] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.224073] pci 0000:03:00.0: [10ec:c822] type 00 class 0x028000 PCIe Endpoint
[    0.224093] pci 0000:03:00.0: BAR 0 [io  0x3000-0x30ff]
[    0.224117] pci 0000:03:00.0: BAR 2 [mem 0xa1100000-0xa110ffff 64bit]
[    0.224248] pci 0000:03:00.0: supports D1 D2
[    0.224249] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.224556] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.227158] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.227233] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.227305] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.227377] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.227449] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.227520] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.227595] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.227667] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.234322] ACPI: EC: interrupt unblocked
[    0.234324] ACPI: EC: event unblocked
[    0.234345] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.234346] ACPI: EC: GPE=0x6e
[    0.234347] ACPI: \_SB_.PC00.LPCB.H_EC: Boot DSDT EC initialization complete
[    0.234348] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
[    0.234556] iommu: Default domain type: Translated
[    0.234556] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.234634] SCSI subsystem initialized
[    0.234638] libata version 3.00 loaded.
[    0.234638] ACPI: bus type USB registered
[    0.234638] usbcore: registered new interface driver usbfs
[    0.234638] usbcore: registered new interface driver hub
[    0.234638] usbcore: registered new device driver usb
[    0.234638] EDAC MC: Ver: 3.0.0
[    0.234802] efivars: Registered efivars operations
[    0.234802] NetLabel: Initializing
[    0.234802] NetLabel:  domain hash size = 128
[    0.234802] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.234802] NetLabel:  unlabeled traffic allowed by default
[    0.234802] mctp: management component transport protocol core
[    0.234802] NET: Registered PF_MCTP protocol family
[    0.234802] PCI: Using ACPI for IRQ routing
[    0.248031] PCI: pci_cache_line_size set to 64 bytes
[    0.248244] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
[    0.248465] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.248466] e820: reserve RAM buffer [mem 0x89dfa018-0x8bffffff]
[    0.248467] e820: reserve RAM buffer [mem 0x8a3f1000-0x8bffffff]
[    0.248468] e820: reserve RAM buffer [mem 0x8ad82000-0x8bffffff]
[    0.248469] e820: reserve RAM buffer [mem 0x91d78000-0x93ffffff]
[    0.248469] e820: reserve RAM buffer [mem 0x99f00000-0x9bffffff]
[    0.248561] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.248561] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.248561] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.248561] vgaarb: loaded
[    0.248585] clocksource: Switched to clocksource tsc-early
[    0.248927] VFS: Disk quotas dquot_6.6.0
[    0.248933] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.248977] pnp: PnP ACPI init
[    0.249322] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.249324] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.249325] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.249326] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.249327] system 00:00: [io  0x0a40-0x0a4f] could not be reserved
[    0.249328] system 00:00: [io  0x0a50-0x0a5f] has been reserved
[    0.249329] system 00:00: [io  0x0a60-0x0a6f] has been reserved
[    0.249330] system 00:00: [io  0x0a70-0x0a7f] has been reserved
[    0.249331] system 00:00: [io  0x0a80-0x0a8f] has been reserved
[    0.250251] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.250253] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.250345] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.251354] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.251356] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.251357] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.251358] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.251359] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.251360] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.251361] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.251362] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.251994] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.251996] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.251998] system 00:04: [mem 0xfe04c000-0xfe04ffff] has been reserved
[    0.251999] system 00:04: [mem 0xfe050000-0xfe0affff] has been reserved
[    0.252000] system 00:04: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[    0.252001] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.252002] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.252003] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.252004] system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.252005] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.252241] system 00:05: [io  0x2000-0x20fe] has been reserved
[    0.252406] system 00:06: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.252408] system 00:06: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.252409] system 00:06: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.252410] system 00:06: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.252411] system 00:06: [mem 0xfd690000-0xfd69ffff] has been reserved
[    0.252970] pnp: PnP ACPI: found 8 devices
[    0.258164] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.258205] NET: Registered PF_INET protocol family
[    0.258302] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.267450] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.267467] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.267493] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.267650] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.267813] TCP: Hash tables configured (established 131072 bind 65536)
[    0.267930] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.267968] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.267996] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.268036] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.268041] NET: Registered PF_XDP protocol family
[    0.268050] pci 0000:00:15.0: BAR 0 [mem 0x4012122000-0x4012122fff 64bit]: assigned
[    0.268154] pci 0000:00:15.2: BAR 0 [mem 0x4012123000-0x4012123fff 64bit]: assigned
[    0.268166] pci 0000:00:1f.5: BAR 0 [mem 0xa1304000-0xa1304fff]: assigned
[    0.268176] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.268178] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.268179] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa10fffff]
[    0.268181] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.268184] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.268195] pci 0000:00:1b.0:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.268200] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.268206] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.268208] pci 0000:00:1c.0:   bridge window [mem 0xa1100000-0xa11fffff]
[    0.268214] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.268215] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.268216] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.268217] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[    0.268218] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xdfffffff window]
[    0.268219] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.268220] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.268221] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa10fffff]
[    0.268222] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.268223] pci_bus 0000:02: resource 1 [mem 0xa1200000-0xa12fffff]
[    0.268224] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.268224] pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff]
[    0.268659] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.268677] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.268836] PCI: CLS 64 bytes, default 64
[    0.268862] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.268863] software IO TLB: mapped [mem 0x00000000803c9000-0x00000000843c9000] (64MB)
[    0.268886] Trying to unpack rootfs image as initramfs...
[    0.268905] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.273700] Initialise system trusted keyrings
[    0.273708] Key type blacklist registered
[    0.273740] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.273747] zbud: loaded
[    0.273812] fuse: init (API version 7.40)
[    0.273857] integrity: Platform Keyring initialized
[    0.273858] integrity: Machine keyring initialized
[    0.282315] Key type asymmetric registered
[    0.282317] Asymmetric key parser 'x509' registered
[    0.282334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.282367] io scheduler mq-deadline registered
[    0.282368] io scheduler kyber registered
[    0.282377] io scheduler bfq registered
[    0.283080] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.283245] Monitor-Mwait will be used to enter C-1 state
[    0.283251] Monitor-Mwait will be used to enter C-2 state
[    0.283255] Monitor-Mwait will be used to enter C-3 state
[    0.283258] ACPI: \_SB_.PR00: Found 3 idle states
[    0.283602] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.283616] ACPI: button: Sleep Button [SLPB]
[    0.283632] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.283641] ACPI: button: Power Button [PWRB]
[    0.283657] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.283688] ACPI: button: Power Button [PWRF]
[    0.283802] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.HEC.CFSP], AE_NOT_FOUND (20240322/psargs-332)
[    0.283807] ACPI Error: Aborting method \_SB.PC00.LPCB.H_EC.TFN1._FST due to previous error (AE_NOT_FOUND) (20240322/psparse-529)
[    0.283811] acpi INTC1044:00: Get fan state failed
[    0.285963] thermal LNXTHERM:00: registered as thermal_zone0
[    0.285964] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.286121] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.287567] hpet_acpi_add: no address or irqs in _CRS
[    0.287599] Non-volatile memory driver v1.3
[    0.287600] Linux agpgart interface v0.103
[    0.317360] ahci 0000:00:17.0: version 3.0
[    0.322385] Freeing initrd memory: 63172K
[    0.327666] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    0.327669] ahci 0000:00:17.0: 6/6 ports implemented (port mask 0x3f)
[    0.327670] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds 
[    0.345615] scsi host0: ahci
[    0.345733] scsi host1: ahci
[    0.345844] scsi host2: ahci
[    0.345937] scsi host3: ahci
[    0.346026] scsi host4: ahci
[    0.346072] scsi host5: ahci
[    0.346095] ata1: SATA max UDMA/133 abar m2048@0xa1302000 port 0xa1302100 irq 123 lpm-pol 3
[    0.346096] ata2: SATA max UDMA/133 abar m2048@0xa1302000 port 0xa1302180 irq 123 lpm-pol 3
[    0.346098] ata3: SATA max UDMA/133 abar m2048@0xa1302000 port 0xa1302200 irq 123 lpm-pol 3
[    0.346099] ata4: SATA max UDMA/133 abar m2048@0xa1302000 port 0xa1302280 irq 123 lpm-pol 3
[    0.346100] ata5: SATA max UDMA/133 abar m2048@0xa1302000 port 0xa1302300 irq 123 lpm-pol 3
[    0.346101] ata6: SATA max UDMA/133 abar m2048@0xa1302000 port 0xa1302380 irq 123 lpm-pol 3
[    0.346186] ACPI: bus type drm_connector registered
[    0.346581] usbcore: registered new interface driver usbserial_generic
[    0.346585] usbserial: USB Serial support registered for generic
[    0.346642] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.347157] rtc_cmos rtc_cmos: registered as rtc0
[    0.347295] rtc_cmos rtc_cmos: setting system clock to 2024-11-11T12:58:00 UTC (1731329880)
[    0.347327] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.347572] intel_pstate: Intel P-state driver initializing
[    0.348214] intel_pstate: HWP enabled
[    0.348331] ledtrig-cpu: registered to indicate activity on CPUs
[    0.348623] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[    0.349694] fbcon: Deferring console take-over
[    0.349696] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.349765] hid: raw HID events driver (C) Jiri Kosina
[    0.349806] drop_monitor: Initializing network drop monitor service
[    0.349871] NET: Registered PF_INET6 protocol family
[    0.353369] Segment Routing with IPv6
[    0.353370] RPL Segment Routing with IPv6
[    0.353375] In-situ OAM (IOAM) with IPv6
[    0.353390] NET: Registered PF_PACKET protocol family
[    0.353891] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.353994] microcode: Current revision: 0x000000fc
[    0.353995] microcode: Updated early from: 0x000000f6
[    0.354009] mce: [Hardware Error]: Machine check events logged
[    0.354009] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee2000000040110a
[    0.354011] mce: [Hardware Error]: TSC 0 ADDR fef19000 MISC 388000c086 
[    0.354013] mce: [Hardware Error]: PROCESSOR 0:a0653 TIME 1731329880 SOCKET 0 APIC 0 microcode fc
[    0.354146] IPI shorthand broadcast: enabled
[    0.355341] sched_clock: Marking stable (349000969, 6065220)->(378727955, -23661766)
[    0.355451] registered taskstats version 1
[    0.355700] Loading compiled-in X.509 certificates
[    0.357384] Loaded X.509 cert 'Build time autogenerated kernel key: 94f35468baf25dbe1445cd2db06b7c7e377f068a'
[    0.359518] zswap: loaded using pool zstd/zsmalloc
[    0.359563] Demotion targets for Node 0: null
[    0.359659] Key type .fscrypt registered
[    0.359660] Key type fscrypt-provisioning registered
[    0.360080] PM:   Magic number: 0:572:986
[    0.360123] platform PNP0C14:03: hash matches
[    0.360128] acpi PNP0C14:03: hash matches
[    0.362330] RAS: Correctable Errors collector initialized.
[    0.369848] clk: Disabling unused clocks
[    0.369849] PM: genpd: Disabling unused power domains
[    0.655044] ata6: SATA link down (SStatus 4 SControl 300)
[    0.655112] ata5: SATA link down (SStatus 4 SControl 300)
[    0.655142] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.655167] ata3: SATA link down (SStatus 4 SControl 300)
[    0.655196] ata4: SATA link down (SStatus 4 SControl 300)
[    0.655226] ata2: SATA link down (SStatus 4 SControl 300)
[    0.655362] ata1.00: ATA-10: SSDPR-CL100-120, N1209B, max UDMA/133
[    0.655634] ata1.00: NCQ Send/Recv Log not supported
[    0.655640] ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.272821] tsc: Refined TSC clocksource calibration: 2904.000 MHz
[    1.272829] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[    1.272911] clocksource: Switched to clocksource tsc
[   15.928688] ata1.00: qc timeout after 15000 msecs (cmd 0x47)
[   15.928717] ata1.00: Read log 0x00 page 0x00 failed, Emask 0x4
[   15.928722] ata1.00: NCQ Send/Recv Log not supported
[   15.928733] ata1.00: configured for UDMA/133
[   16.246120] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   16.246614] ata1.00: NCQ Send/Recv Log not supported
[   16.247085] ata1.00: NCQ Send/Recv Log not supported
[   16.247099] ata1.00: configured for UDMA/133
[   16.257584] scsi 0:0:0:0: Direct-Access     ATA      SSDPR-CL100-120  9B   PQ: 0 ANSI: 5
[   16.258206] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[   16.258292] sd 0:0:0:0: [sda] Write Protect is off
[   16.258300] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.258457] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.258764] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[   16.269837]  sda:
[   16.269865] sd 0:0:0:0: [sda] Attached SCSI disk
[   16.271992] Freeing unused decrypted memory: 2028K
[   16.272948] Freeing unused kernel image (initmem) memory: 3592K
[   16.272982] Write protecting the kernel read-only data: 34816k
[   16.273991] Freeing unused kernel image (rodata/data gap) memory: 972K
[   16.283531] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   16.283534] rodata_test: all tests were successful
[   16.283537] Run /init as init process
[   16.283538]   with arguments:
[   16.283538]     /init
[   16.283539]   with environment:
[   16.283540]     HOME=/
[   16.283540]     TERM=linux
[   16.283541]     BOOT_IMAGE=/vmlinuz-linux-zen
[   16.403674] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   16.403682] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[   16.404770] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[   16.405040] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   16.405045] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[   16.405048] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[   16.405111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[   16.405115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.405117] usb usb1: Product: xHCI Host Controller
[   16.405119] usb usb1: Manufacturer: Linux 6.11.6-zen1-1-zen xhci-hcd
[   16.405120] usb usb1: SerialNumber: 0000:00:14.0
[   16.405249] hub 1-0:1.0: USB hub found
[   16.405270] hub 1-0:1.0: 16 ports detected
[   16.409302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[   16.409306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.409308] usb usb2: Product: xHCI Host Controller
[   16.409309] usb usb2: Manufacturer: Linux 6.11.6-zen1-1-zen xhci-hcd
[   16.409311] usb usb2: SerialNumber: 0000:00:14.0
[   16.409402] hub 2-0:1.0: USB hub found
[   16.409418] hub 2-0:1.0: 6 ports detected
[   16.410435] usb: port power management may be unreliable
[   16.412368] nvme nvme0: pci function 0000:02:00.0
[   16.425211] nvme nvme0: allocated 64 MiB host memory buffer.
[   16.434175] nvme nvme0: 12/0/0 default/read/poll queues
[   16.436081]  nvme0n1: p1 p2 p3 p4
[   16.454535] device-mapper: uevent: version 1.0.3
[   16.454579] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[   16.548019] fbcon: Taking over console
[   16.550575] Console: switching to colour frame buffer device 240x67
[   16.620392] EXT4-fs (dm-0): mounted filesystem 7f9019e0-f491-4e93-8774-a5016aa0a7b5 r/w with ordered data mode. Quota mode: none.
[   16.651164] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[   16.677792] systemd[1]: systemd 256.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[   16.677796] systemd[1]: Detected architecture x86-64.
[   16.778222] usb 1-2: New USB device found, idVendor=0bda, idProduct=c123, bcdDevice= 0.00
[   16.778232] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   16.778236] usb 1-2: Product: Bluetooth Radio
[   16.778239] usb 1-2: Manufacturer: Realtek
[   16.778242] usb 1-2: SerialNumber: 00e04c000001
[   16.891262] usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd
[   16.927603] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[   17.035905] systemd-ssh-generator[327]: Disabling SSH generator logic, since sshd is not installed.
[   17.112489] systemd[1]: Queued start job for default target Graphical Interface.
[   17.136315] systemd[1]: Created slice Slice /system/dirmngr.
[   17.137436] systemd[1]: Created slice Slice /system/getty.
[   17.138440] systemd[1]: Created slice Slice /system/gpg-agent.
[   17.139421] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[   17.140482] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[   17.141464] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[   17.142456] systemd[1]: Created slice Slice /system/keyboxd.
[   17.142859] usb 2-5: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=90.84
[   17.142871] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   17.142877] usb 2-5: Product: USB3.0 Hub             
[   17.142882] usb 2-5: Manufacturer: VIA Labs, Inc.         
[   17.143478] systemd[1]: Created slice Slice /system/modprobe.
[   17.144431] systemd[1]: Created slice Slice /system/systemd-fsck.
[   17.144825] hub 2-5:1.0: USB hub found
[   17.145007] systemd[1]: Created slice User and Session Slice.
[   17.145051] hub 2-5:1.0: 4 ports detected
[   17.145195] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   17.145594] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   17.145652] systemd[1]: Expecting device /dev/disk/by-uuid/18dc7566-1021-4654-a5e2-3b6289c08c37...
[   17.145669] systemd[1]: Expecting device /dev/disk/by-uuid/33905ce4-b0d0-4433-afe9-b93f9b21ec84...
[   17.145684] systemd[1]: Expecting device /dev/disk/by-uuid/cddc1c16-7199-472f-86df-7e6af1e56c43...
[   17.145731] systemd[1]: Reached target Login Prompts.
[   17.145773] systemd[1]: Reached target Local Integrity Protected Volumes.
[   17.145831] systemd[1]: Reached target Remote File Systems.
[   17.145883] systemd[1]: Reached target Slice Units.
[   17.145960] systemd[1]: Reached target Local Verity Protected Volumes.
[   17.146207] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   17.146441] systemd[1]: Listening on LVM2 poll daemon socket.
[   17.155207] systemd[1]: Listening on Process Core Dump Socket.
[   17.157238] systemd[1]: Listening on Credential Encryption/Decryption.
[   17.157429] systemd[1]: Listening on Journal Socket (/dev/log).
[   17.157589] systemd[1]: Listening on Journal Sockets.
[   17.157670] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   17.157701] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   17.157863] systemd[1]: Listening on udev Control Socket.
[   17.157984] systemd[1]: Listening on udev Kernel Socket.
[   17.158125] systemd[1]: Listening on User Database Manager Socket.
[   17.159800] systemd[1]: Mounting Huge Pages File System...
[   17.161004] systemd[1]: Mounting POSIX Message Queue File System...
[   17.162248] systemd[1]: Mounting Kernel Debug File System...
[   17.163111] systemd[1]: Mounting Kernel Trace File System...
[   17.164240] systemd[1]: Starting Create List of Static Device Nodes...
[   17.165266] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   17.176753] systemd[1]: Starting Load Kernel Module configfs...
[   17.178738] systemd[1]: Starting Load Kernel Module dm_mod...
[   17.180085] systemd[1]: Starting Load Kernel Module drm...
[   17.181168] systemd[1]: Starting Load Kernel Module fuse...
[   17.182191] systemd[1]: Starting Load Kernel Module loop...
[   17.182246] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   17.182278] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[   17.183154] systemd[1]: Starting Journal Service...
[   17.183929] systemd[1]: Starting Load Kernel Modules...
[   17.183944] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   17.184594] systemd[1]: Starting Remount Root and Kernel File Systems...
[   17.184640] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   17.185267] systemd[1]: Starting Load udev Rules from Credentials...
[   17.185862] systemd[1]: Starting Coldplug All udev Devices...
[   17.186455] systemd[1]: Starting Virtual Console Setup...
[   17.189623] loop: module loaded
[   17.189731] systemd[1]: Mounted Huge Pages File System.
[   17.189816] systemd[1]: Mounted POSIX Message Queue File System.
[   17.189898] systemd[1]: Mounted Kernel Debug File System.
[   17.190009] systemd[1]: Mounted Kernel Trace File System.
[   17.190248] systemd[1]: Finished Create List of Static Device Nodes.
[   17.190500] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   17.190650] systemd[1]: Finished Load Kernel Module configfs.
[   17.190881] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   17.191006] systemd[1]: Finished Load Kernel Module dm_mod.
[   17.191171] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   17.191265] systemd[1]: Finished Load Kernel Module drm.
[   17.191467] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   17.191597] systemd[1]: Finished Load Kernel Module fuse.
[   17.191802] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   17.191934] systemd[1]: Finished Load Kernel Module loop.
[   17.192158] systemd[1]: Finished Load udev Rules from Credentials.
[   17.192906] systemd[1]: Mounting FUSE Control File System...
[   17.193423] systemd[1]: Mounting Kernel Configuration File System...
[   17.193465] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[   17.194086] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[   17.196782] systemd[1]: Mounted FUSE Control File System.
[   17.197188] systemd[1]: Mounted Kernel Configuration File System.
[   17.197323] systemd-journald[345]: Collecting audit messages is disabled.
[   17.199800] i2c_dev: i2c /dev entries driver
[   17.199965] systemd[1]: Finished Virtual Console Setup.
[   17.202276] EXT4-fs (dm-0): re-mounted 7f9019e0-f491-4e93-8774-a5016aa0a7b5 r/w. Quota mode: none.
[   17.202933] systemd[1]: Finished Remount Root and Kernel File Systems.
[   17.203181] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   17.203812] systemd[1]: Starting Load/Save OS Random Seed...
[   17.203829] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   17.208561] systemd[1]: Starting User Database Manager...
[   17.212426] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   17.215124] systemd[1]: Finished Load/Save OS Random Seed.
[   17.225537] systemd[1]: Started Journal Service.
[   17.237735] systemd-journald[345]: Received client request to flush runtime journal.
[   17.256077] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[   17.347860] Consider using thermal netlink events interface
[   17.356904] intel_pmc_core INT33A1:00:  initialized
[   17.380104] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   17.385175] usb 1-4: New USB device found, idVendor=0c76, idProduct=2020, bcdDevice= 1.00
[   17.385180] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   17.385182] usb 1-4: Product: SMXG011
[   17.385184] usb 1-4: Manufacturer: Generic
[   17.385185] usb 1-4: SerialNumber: 20170726905957
[   17.389553] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   17.395040] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   17.395086] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   17.407399] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[   17.408455] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   17.419078] i2c i2c-0: Successfully instantiated SPD at 0x50
[   17.432655] Adding 4194300k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:4194300k SS
[   17.445823] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   17.450252] iTCO_vendor_support: vendor-support=0
[   17.452311] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   17.452475] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   17.454166] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[   17.456852] Creating 1 MTD partitions on "0000:00:1f.5":
[   17.456855] 0x000000000000-0x000000800000 : "BIOS"
[   17.460923] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[   17.461004] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.461236] intel_rapl_common: Found RAPL domain package
[   17.461238] intel_rapl_common: Found RAPL domain core
[   17.461240] intel_rapl_common: Found RAPL domain dram
[   17.461255] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[   17.461257] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   17.461258] RAPL PMU: hw unit of domain package 2^-14 Joules
[   17.461259] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   17.462629] Creating 1 MTD partitions on "0000:00:1f.5-chip1":
[   17.462632] 0x000000000000-0x000001000000 : "BIOS1"
[   17.465326] cryptd: max_cpu_qlen set to 1000
[   17.476534] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[   17.477288] AES CTR mode by8 optimization enabled
[   17.482007] intel_rapl_common: Found RAPL domain package
[   17.482009] intel_rapl_common: Found RAPL domain dram
[   17.489083] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   17.489453] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   17.489787] snd_hda_intel 0000:01:00.1: Disabling MSI
[   17.489791] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   17.505081] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[   17.505495] idma64 idma64.1: Found Intel integrated DMA 64-bit
[   17.517080] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[   17.561131] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   17.561137] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.561139] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   17.561141] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   17.561143] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   17.564835] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[   17.564875] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[   17.564917] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[   17.564955] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   17.572826] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   17.572867] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   17.573664] rtw_8822ce 0000:03:00.0: enabling device (0000 -> 0003)
[   17.575671] rtw_8822ce 0000:03:00.0: WOW Firmware version 9.9.4, H2C version 15
[   17.576982] rtw_8822ce 0000:03:00.0: Firmware version 9.9.15, H2C version 15
[   17.625593] rtw_8822ce 0000:03:00.0 wlp3s0: renamed from wlan0
[   17.646581] intel_tcc_cooling: TCC Offset locked
[   17.648170] usb 1-5: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.80
[   17.648173] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   17.648174] usb 1-5: Product: USB2.0 Hub             
[   17.648175] usb 1-5: Manufacturer: VIA Labs, Inc.         
[   17.648928] hub 1-5:1.0: USB hub found
[   17.649033] hub 1-5:1.0: 4 ports detected
[   17.712220] usb 2-5.3: new SuperSpeed USB device number 3 using xhci_hcd
[   17.770162] nvidia: loading out-of-tree module taints kernel.
[   17.770168] nvidia: module license 'NVIDIA' taints kernel.
[   17.770169] Disabling lock debugging due to kernel taint
[   17.770171] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   17.770172] nvidia: module license taints kernel.
[   17.940807] nvidia-nvlink: Nvlink Core is being initialized, major device number 237

[   17.942014] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[   17.963714] usb 2-5.3: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=90.81
[   17.963722] usb 2-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   17.963725] usb 2-5.3: Product: USB3.0 Hub             
[   17.963728] usb 2-5.3: Manufacturer: VIA Labs, Inc.         
[   17.965085] hub 2-5.3:1.0: USB hub found
[   17.965258] hub 2-5.3:1.0: 4 ports detected
[   17.990273] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  565.57.01  Thu Oct 10 12:29:05 UTC 2024
[   18.017551] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  565.57.01  Thu Oct 10 12:02:00 UTC 2024
[   18.020201] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   18.025252] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[   18.076109] usb 1-9: new high-speed USB device number 5 using xhci_hcd
[   18.203962] usb 1-9: New USB device found, idVendor=23c5, idProduct=1478, bcdDevice= 4.09
[   18.203964] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   18.203965] usb 1-9: Product: web camera
[   18.203966] usb 1-9: Manufacturer: Xiongmai
[   18.203967] usb 1-9: SerialNumber: 12345678
[   18.207644] EXT4-fs (nvme0n1p2): mounted filesystem 18dc7566-1021-4654-a5e2-3b6289c08c37 r/w with ordered data mode. Quota mode: none.
[   18.217197] EXT4-fs (dm-1): mounted filesystem 33905ce4-b0d0-4433-afe9-b93f9b21ec84 r/w with ordered data mode. Quota mode: none.
[   18.279106] usb 1-5.3: new high-speed USB device number 6 using xhci_hcd
[   18.370395] usb 1-5.3: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.80
[   18.370398] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   18.370399] usb 1-5.3: Product: USB2.0 Hub             
[   18.370400] usb 1-5.3: Manufacturer: VIA Labs, Inc.         
[   18.371282] hub 1-5.3:1.0: USB hub found
[   18.371617] hub 1-5.3:1.0: 4 ports detected
[   18.434241] usb 2-5.4: new SuperSpeed USB device number 4 using xhci_hcd
[   18.446858] usb 2-5.4: New USB device found, idVendor=0bc2, idProduct=2322, bcdDevice= 0.00
[   18.446861] usb 2-5.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[   18.446862] usb 2-5.4: Product: Expansion
[   18.446862] usb 2-5.4: Manufacturer: Seagate
[   18.446863] usb 2-5.4: SerialNumber: NA81HSXL
[   18.459647] usbcore: registered new interface driver usb-storage
[   18.464631] scsi host6: uas
[   18.464677] usbcore: registered new interface driver uas
[   18.465128] scsi 6:0:0:0: Direct-Access     Seagate  Expansion        9300 PQ: 0 ANSI: 6
[   18.466946] sd 6:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[   18.466948] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[   18.467071] sd 6:0:0:0: [sdb] Write Protect is off
[   18.467073] sd 6:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[   18.467229] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.493214] sd 6:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[   18.493215] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[   18.503978]  sdb: sdb1 sdb2
[   18.504077] sd 6:0:0:0: [sdb] Attached SCSI disk
[   18.560106] usb 1-10: new low-speed USB device number 7 using xhci_hcd
[   18.690109] usb 1-10: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice= 1.00
[   18.690111] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   18.690112] usb 1-10: Product: Lenovo USB Optical Mouse
[   18.690113] usb 1-10: Manufacturer: PixArt
[   18.805105] usb 1-11: new low-speed USB device number 8 using xhci_hcd
[   18.939997] usb 1-11: New USB device found, idVendor=17ef, idProduct=6100, bcdDevice= 0.20
[   18.939999] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   18.940001] usb 1-11: Product: Lenovo New Calliope USB Keyboard
[   18.940001] usb 1-11: Manufacturer: LiteOn
[   18.949199] mc: Linux media interface: v0.10
[   18.959795] usbcore: registered new interface driver usbhid
[   18.959797] usbhid: USB HID core driver
[   18.961123] videodev: Linux video capture interface: v2.00
[   18.978999] input: Generic SMXG011 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:0C76:2020.0001/input/input10
[   18.979195] Bluetooth: Core ver 2.22
[   18.979205] NET: Registered PF_BLUETOOTH protocol family
[   18.979206] Bluetooth: HCI device and connection manager initialized
[   18.979208] Bluetooth: HCI socket layer initialized
[   18.979209] Bluetooth: L2CAP socket layer initialized
[   18.979211] Bluetooth: SCO socket layer initialized
[   18.990054] usb 1-9: Found UVC 1.10 device web camera (23c5:1478)
[   18.990913] usb 1-4: 5:0: bogus dB values (-12800/-12700), disabling dB reporting
[   18.994971] usbcore: registered new interface driver uvcvideo
[   18.996267] usbcore: registered new interface driver btusb
[   18.996809] usbcore: registered new interface driver snd-usb-audio
[   18.998848] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
[   18.999817] Bluetooth: hci0: RTL: rom_version status=0 version=3
[   18.999820] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
[   19.000609] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
[   19.000756] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37346
[   19.030178] hid-generic 0003:0C76:2020.0001: input,hidraw0: USB HID v2.01 Device [Generic SMXG011] on usb-0000:00:14.0-4/input2
[   19.030259] input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:17EF:608D.0002/input/input11
[   19.030287] hid-generic 0003:17EF:608D.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:14.0-10/input0
[   19.030392] input: LiteOn Lenovo New Calliope USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:17EF:6100.0003/input/input12
[   19.102169] hid-generic 0003:17EF:6100.0003: input,hidraw2: USB HID v1.11 Keyboard [LiteOn Lenovo New Calliope USB Keyboard] on usb-0000:00:14.0-11/input0
[   19.102270] input: LiteOn Lenovo New Calliope USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:17EF:6100.0004/input/input13
[   19.154251] hid-generic 0003:17EF:6100.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [LiteOn Lenovo New Calliope USB Keyboard] on usb-0000:00:14.0-11/input1
[   19.158968] mousedev: PS/2 mouse device common for all mice
[   19.176818] Bluetooth: hci0: RTL: fw version 0xaed66dcb
[   19.248892] Bluetooth: hci0: AOSP extensions version v1.00
[   19.248894] Bluetooth: hci0: AOSP quality report is supported
[   19.544844] nvidia-uvm: Loaded the UVM driver, major device number 234.
[   19.726853] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 1
[   19.730134] Console: switching to colour dummy device 80x25
[   19.747420] nvidia 0000:01:00.0: vgaarb: deactivate vga console
[   19.836459] fbcon: nvidia-drmdrmfb (fb0) is primary device
[   19.925011] Console: switching to colour frame buffer device 240x67
[   19.942043] nvidia 0000:01:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
[   25.131372] wlp3s0: authenticate with 5c:3a:3d:d4:28:f2 (local address=f0:a6:54:4b:cc:6f)
[   25.340615] wlp3s0: send auth to 5c:3a:3d:d4:28:f2 (try 1/3)
[   25.344390] wlp3s0: authenticated
[   25.345091] wlp3s0: associate with 5c:3a:3d:d4:28:f2 (try 1/3)
[   25.351127] wlp3s0: RX AssocResp from 5c:3a:3d:d4:28:f2 (capab=0x1811 status=0 aid=1)
[   25.351483] wlp3s0: associated
[   25.396587] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 5c:3a:3d:d4:28:f2
[   33.876326] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

Offline

#5 2024-11-11 13:09:15

Vertennn
Member
Registered: 2024-11-10
Posts: 13

Re: [SOLVED] Several Hardware MCE Errors

ugjka wrote:

Can you check that your cpu is not one of those Intel one's that can fry themselves overtime

I don't think so. I installed rasdaemon using yay, used sensors, and also applied a few commands, the results of which I have sent below. Strangely, it shows no MCE errors.

ras-mc-ctl --mainboard

ras-mc-ctl: mainboard: LENOVO model 3730

ras-mc-ctl --status

ras-mc-ctl: drivers not loaded.

ras-mc-ctl --summary

No Memory errors.

No PCIe AER errors.

No ARM processor errors.

No Extlog errors.

No devlink errors.

No MCE errors.

sensors

nvme-pci-0200
Adapter: PCI adapter
Composite:    +29.9°C  (low  = -20.1°C, high = +77.8°C)
                       (crit = +81.8°C)
Sensor 1:     +29.9°C  (low  = -273.1°C, high = +65261.8°C)

acpi_fan-acpi-0
Adapter: ACPI interface
fan1:             N/A

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +35.0°C  (high = +84.0°C, crit = +100.0°C)
Core 0:        +34.0°C  (high = +84.0°C, crit = +100.0°C)
Core 1:        +34.0°C  (high = +84.0°C, crit = +100.0°C)
Core 2:        +33.0°C  (high = +84.0°C, crit = +100.0°C)
Core 3:        +32.0°C  (high = +84.0°C, crit = +100.0°C)
Core 4:        +32.0°C  (high = +84.0°C, crit = +100.0°C)
Core 5:        +35.0°C  (high = +84.0°C, crit = +100.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C

Last edited by Vertennn (2024-11-11 17:34:30)

Offline

Pages: 1

Board footer

Powered by FluxBB