You are not logged in.

Pages: 1

#1 2024-12-12 10:05:42

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Crash app with GPU acceleration

Hello everyone. I have a Thinkpad X270 with an Intel 620, I use Awesome. When using applications with GPU acceleration, I occasionally see crashes in some apps. Something goes wrong, after which all applications with acceleration freeze with a black screen: Chrome, Telegram, Alacritty. At the same time, the system continues to work. I have to open htop and manually stop the Alacritty copies and Telegram. Chrome restores its work itself after a while.

I have installed mesa and xf86-video-intel. But vainfo return this

[gena@gena-pc ~]$ vainfo
Trying display: wayland
Trying display: x11
vaInitialize failed with error code -1 (unknown libva error),exit

But I don't understand clearly what I can do with this situation. Thanks to all for any help

Offline

#2 2024-12-12 10:25:13

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 15,043

Re: Crash app with GPU acceleration

Your processor is Kaby Lake and was launched in 2016 .

That generation should not need xf86-video-intel , please remove it and verify if that helps.

Also please post the output of pacman -Qs intel .

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#3 2024-12-12 11:34:04

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,681

Re: Crash app with GPU acceleration

In addition you'll need intel-media-driver for VAAPI, https://wiki.archlinux.org/title/Hardwa … tion#Intel
But that's not relevant for alacritty (only GL) - for the immediate problem follow the lone wolf.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#4 2024-12-12 11:59:29

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Re: Crash app with GPU acceleration

Lone_Wolf wrote:

Your processor is Kaby Lake and was launched in 2016 .

That generation should not need xf86-video-intel , please remove it and verify if that helps.

Also please post the output of pacman -Qs intel .

I have delete xf86-video-intel and install intel-media-driver. Now I have around 100% CPU loading all time and freezing sometimes.

[gena@gena-pc ~]$ pacman -Qs intel
local/intel-gmmlib 22.5.4-1
    Intel Graphics Memory Management Library
local/intel-media-driver 24.4.3-1
    Intel Media Driver for VAAPI — Broadwell+ iGPUs
local/libva-utils 2.22.0-1
    Intel VA-API Media Applications and Scripts for libva
local/libvpl 2.13.0-1
    Intel Video Processing Library

Offline

#5 2024-12-12 12:01:59

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Re: Crash app with GPU acceleration

seth wrote:

In addition you'll need intel-media-driver for VAAPI, https://wiki.archlinux.org/title/Hardwa … tion#Intel
But that's not relevant for alacritty (only GL) - for the immediate problem follow the lone wolf.

I have install intel-media-driver. But I dont clearly understand how I should make environment variable. Now I have this.

[gena@gena-pc ~]$ printenv
SHELL=/usr/bin/bash
WINDOWID=6291459
COLORTERM=truecolor
XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session0
DESKTOP_SESSION=awesome
GTK_MODULES=canberra-gtk-module
XDG_SEAT=seat0
PWD=/home/gena
XDG_SESSION_DESKTOP=awesome
LOGNAME=gena
QT_QPA_PLATFORMTHEME=qt5ct
XDG_SESSION_TYPE=x11
XAUTHORITY=/home/gena/.Xauthority
XDG_GREETER_DATA_DIR=/var/lib/lightdm-data/gena
MOTD_SHOWN=pam
GDM_LANG=en_US.utf8
HOME=/home/gena
LANG=en_US.utf8
XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
ALACRITTY_SOCKET=/run/user/1000/Alacritty-:0-1128.sock
XDG_SESSION_CLASS=user
TERM=xterm-256color
USER=gena
DISPLAY=:0
SHLVL=1
XDG_VTNR=7
XDG_SESSION_ID=2
XDG_RUNTIME_DIR=/run/user/1000
DEBUGINFOD_URLS=https://debuginfod.archlinux.org
PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
ALACRITTY_LOG=/tmp/Alacritty-1128.log
GDMSESSION=awesome
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
MAIL=/var/spool/mail/gena
ALACRITTY_WINDOW_ID=6291459
_=/usr/bin/printenv

Offline

#6 2024-12-12 12:36:46

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,681

Re: Crash app with GPU acceleration

Now I have around 100% CPU loading

By what process? Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

https://wiki.archlinux.org/title/Hardwa … ing_VA-API - but you should™ not have to export anything here.
What's the output of "vainfo" now?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2024-12-12 12:50:56

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Re: Crash app with GPU acceleration

seth wrote:

Now I have around 100% CPU loading

By what process? Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

https://wiki.archlinux.org/title/Hardwa … ing_VA-API - but you should™ not have to export anything here.
What's the output of "vainfo" now?

I have 100% CPU loading about 2-3 minutes and after that its normally. But sometimes I have small freeze. For example when printing by keyboard.

My xorg.0.log

[    27.965] 
X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
[    27.965] Current Operating System: Linux gena-pc 6.12.4-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 09 Dec 2024 14:31:57 +0000 x86_64
[    27.965] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=458352f8-3790-4791-9a12-4d1d618e2d2c rw loglevel=3 quiet
[    27.965]  
[    27.965] Current version of pixman: 0.44.2
[    27.965] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    27.965] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.966] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 12 15:33:41 2024
[    27.975] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    27.975] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.981] (==) No Layout section.  Using the first Screen section.
[    27.981] (==) No screen section available. Using defaults.
[    27.981] (**) |-->Screen "Default Screen Section" (0)
[    27.981] (**) |   |-->Monitor "<default monitor>"
[    27.988] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.988] (**) Allowing byte-swapped clients
[    27.989] (==) Automatically adding devices
[    27.989] (==) Automatically enabling devices
[    27.989] (==) Automatically adding GPU devices
[    27.989] (==) Automatically binding GPU devices
[    27.989] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    27.989] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    27.989] 	Entry deleted from font path.
[    27.990] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    27.990] 	Entry deleted from font path.
[    27.990] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    27.990] 	Entry deleted from font path.
[    27.997] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    27.997] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.997] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.997] (II) Module ABI versions:
[    27.997] 	X.Org ANSI C Emulation: 0.4
[    27.997] 	X.Org Video Driver: 25.2
[    27.997] 	X.Org XInput driver : 24.4
[    27.997] 	X.Org Server Extension : 10.0
[    28.000] (++) using VT number 7

[    28.000] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    28.092] (II) xfree86: Adding drm device (/dev/dri/card1)
[    28.092] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    28.163] (--) PCI:*(0@0:2:0) 8086:5916:17aa:5062 rev 2, Mem @ 0xe0000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[    28.166] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    28.167] (II) LoadModule: "glx"
[    28.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.210] (II) Module glx: vendor="X.Org Foundation"
[    28.211] 	compiled for 1.21.1.14, module version = 1.0.0
[    28.211] 	ABI class: X.Org Server Extension, version 10.0
[    28.211] (==) Matched intel as autoconfigured driver 0
[    28.211] (==) Matched modesetting as autoconfigured driver 1
[    28.211] (==) Matched fbdev as autoconfigured driver 2
[    28.211] (==) Matched vesa as autoconfigured driver 3
[    28.211] (==) Assigned the driver to the xf86ConfigLayout
[    28.211] (II) LoadModule: "intel"
[    28.213] (WW) Warning, couldn't open module intel
[    28.213] (EE) Failed to load module "intel" (module does not exist, 0)
[    28.213] (II) LoadModule: "modesetting"
[    28.217] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    28.222] (II) Module modesetting: vendor="X.Org Foundation"
[    28.222] 	compiled for 1.21.1.14, module version = 1.21.1
[    28.222] 	Module class: X.Org Video Driver
[    28.222] 	ABI class: X.Org Video Driver, version 25.2
[    28.222] (II) LoadModule: "fbdev"
[    28.224] (WW) Warning, couldn't open module fbdev
[    28.224] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    28.224] (II) LoadModule: "vesa"
[    28.224] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    28.230] (II) Module vesa: vendor="X.Org Foundation"
[    28.230] 	compiled for 1.21.1.11, module version = 2.6.0
[    28.230] 	Module class: X.Org Video Driver
[    28.230] 	ABI class: X.Org Video Driver, version 25.2
[    28.230] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    28.230] (II) VESA: driver for VESA chipsets: vesa
[    28.285] (II) modeset(0): using drv /dev/dri/card1
[    28.286] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    28.286] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    28.286] (==) modeset(0): RGB weight 888
[    28.286] (==) modeset(0): Default visual is TrueColor
[    28.286] (II) Loading sub module "glamoregl"
[    28.286] (II) LoadModule: "glamoregl"
[    28.287] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    28.334] (II) Module glamoregl: vendor="X.Org Foundation"
[    28.334] 	compiled for 1.21.1.14, module version = 1.0.1
[    28.335] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.437] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 620 (KBL GT2)
[    29.437] (II) modeset(0): glamor initialized
[    29.437] (==) modeset(0): VariableRefresh: disabled
[    29.437] (==) modeset(0): AsyncFlipSecondaries: disabled
[    29.440] (II) modeset(0): Output eDP-1 has no monitor section
[    29.450] (II) modeset(0): Output DP-1 has no monitor section
[    29.514] (II) modeset(0): Output HDMI-1 has no monitor section
[    29.524] (II) modeset(0): Output DP-2 has no monitor section
[    29.532] (II) modeset(0): Output HDMI-2 has no monitor section
[    29.544] (II) modeset(0): EDID for output eDP-1
[    29.544] (II) modeset(0): Manufacturer: CMN  Model: 1239  Serial#: 0
[    29.544] (II) modeset(0): Year: 2015  Week: 6
[    29.544] (II) modeset(0): EDID Version: 1.4
[    29.544] (II) modeset(0): Digital Display Input
[    29.544] (II) modeset(0): 8 bits per channel
[    29.544] (II) modeset(0): Digital interface is DisplayPort
[    29.544] (II) modeset(0): Max Image Size [cm]: horiz.: 28  vert.: 16
[    29.544] (II) modeset(0): Gamma: 2.20
[    29.544] (II) modeset(0): No DPMS capabilities specified
[    29.545] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    29.545] (II) modeset(0): First detailed timing is preferred mode
[    29.545] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    29.545] (II) modeset(0): redX: 0.587 redY: 0.345   greenX: 0.323 greenY: 0.595
[    29.545] (II) modeset(0): blueX: 0.153 blueY: 0.148   whiteX: 0.313 whiteY: 0.329
[    29.545] (II) modeset(0): Manufacturer's mask: 0
[    29.545] (II) modeset(0): Supported detailed timing:
[    29.545] (II) modeset(0): clock: 138.8 MHz   Image Size:  276 x 155 mm
[    29.545] (II) modeset(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[    29.545] (II) modeset(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[    29.545] (II) modeset(0):  N125HCE-GN1
[    29.545] (II) modeset(0):  CMN
[    29.545] (II) modeset(0):  N125HCE-GN1
[    29.545] (II) modeset(0): EDID (in hex):
[    29.545] (II) modeset(0): 	00ffffffffffff000dae391200000000
[    29.546] (II) modeset(0): 	06190104a51c1078025d459658529827
[    29.546] (II) modeset(0): 	26505400000001010101010101010101
[    29.546] (II) modeset(0): 	010101010101363680a0703820402e1e
[    29.546] (II) modeset(0): 	2400149b1000001a000000fe004e3132
[    29.546] (II) modeset(0): 	354843452d474e310a20000000fe0043
[    29.546] (II) modeset(0): 	4d4e0a202020202020202020000000fe
[    29.546] (II) modeset(0): 	004e3132354843452d474e310a200091
[    29.548] (II) modeset(0): Printing probed modes for output eDP-1
[    29.548] (II) modeset(0): Modeline "1920x1080"x60.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 +hsync -vsync (66.7 kHz eP)
[    29.548] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    29.548] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    29.548] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    29.548] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    29.549] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    29.549] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    29.549] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    29.549] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    29.549] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    29.549] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    29.549] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    29.549] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    29.549] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    29.549] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    29.549] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    29.549] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    29.549] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    29.549] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    29.549] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    29.550] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    29.550] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    29.550] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    29.550] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    29.550] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    29.550] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    29.550] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    29.550] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    29.551] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    29.551] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    29.551] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    29.551] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    29.551] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    29.551] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    29.551] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    29.551] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    29.551] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    29.551] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    29.551] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    29.551] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    29.551] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    29.551] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    29.552] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    29.552] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    29.552] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    29.552] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    29.552] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    29.552] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    29.552] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    29.552] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    29.552] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    29.552] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    29.552] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    29.552] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    29.552] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    29.553] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    29.553] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    29.553] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    29.553] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    29.553] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    29.553] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    29.553] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    29.553] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    29.553] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    29.553] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    29.553] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    29.553] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    29.553] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    29.553] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    29.554] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    29.554] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    29.554] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    29.554] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    29.554] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    29.554] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    29.563] (II) modeset(0): EDID for output DP-1
[    29.628] (II) modeset(0): EDID for output HDMI-1
[    29.636] (II) modeset(0): EDID for output DP-2
[    29.642] (II) modeset(0): EDID for output HDMI-2
[    29.642] (II) modeset(0): Output eDP-1 connected
[    29.642] (II) modeset(0): Output DP-1 disconnected
[    29.642] (II) modeset(0): Output HDMI-1 disconnected
[    29.642] (II) modeset(0): Output DP-2 disconnected
[    29.642] (II) modeset(0): Output HDMI-2 disconnected
[    29.642] (II) modeset(0): Using exact sizes for initial modes
[    29.642] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    29.643] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    29.643] (==) modeset(0): DPI set to (96, 96)
[    29.643] (II) Loading sub module "fb"
[    29.643] (II) LoadModule: "fb"
[    29.646] (II) Module "fb" already built-in
[    29.646] (II) UnloadModule: "vesa"
[    29.646] (II) Unloading vesa
[    29.889] (==) modeset(0): Backing store enabled
[    29.889] (==) modeset(0): Silken mouse enabled
[    29.976] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    29.977] (==) modeset(0): DPMS enabled
[    29.978] (II) modeset(0): [DRI2] Setup complete
[    29.978] (II) modeset(0): [DRI2]   DRI driver: iris
[    29.978] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[    29.978] (II) Initializing extension Generic Event Extension
[    29.980] (II) Initializing extension SHAPE
[    29.982] (II) Initializing extension MIT-SHM
[    29.984] (II) Initializing extension XInputExtension
[    29.986] (II) Initializing extension XTEST
[    29.988] (II) Initializing extension BIG-REQUESTS
[    29.989] (II) Initializing extension SYNC
[    29.991] (II) Initializing extension XKEYBOARD
[    29.994] (II) Initializing extension XC-MISC
[    29.995] (II) Initializing extension SECURITY
[    29.996] (II) Initializing extension XFIXES
[    29.998] (II) Initializing extension RENDER
[    29.999] (II) Initializing extension RANDR
[    30.003] (II) Initializing extension COMPOSITE
[    30.005] (II) Initializing extension DAMAGE
[    30.010] (II) Initializing extension MIT-SCREEN-SAVER
[    30.012] (II) Initializing extension DOUBLE-BUFFER
[    30.016] (II) Initializing extension RECORD
[    30.018] (II) Initializing extension DPMS
[    30.023] (II) Initializing extension Present
[    30.025] (II) Initializing extension DRI3
[    30.027] (II) Initializing extension X-Resource
[    30.029] (II) Initializing extension XVideo
[    30.034] (II) Initializing extension XVideo-MotionCompensation
[    30.034] (II) Initializing extension GLX
[    30.220] (II) AIGLX: Loaded and initialized iris
[    30.220] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.220] (II) Initializing extension XFree86-VidModeExtension
[    30.222] (II) Initializing extension XFree86-DGA
[    30.224] (II) Initializing extension XFree86-DRI
[    30.224] (II) Initializing extension DRI2
[    30.393] (II) modeset(0): Damage tracking initialized
[    30.393] (II) modeset(0): Setting screen physical size to 508 x 285
[    31.521] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.522] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    31.522] (**) Power Button: Applying InputClass "system-keyboard"
[    31.522] (II) LoadModule: "libinput"
[    31.522] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    31.542] (II) Module libinput: vendor="X.Org Foundation"
[    31.543] 	compiled for 1.21.1.13, module version = 1.5.0
[    31.543] 	Module class: X.Org XInput Driver
[    31.543] 	ABI class: X.Org XInput driver, version 24.4
[    31.543] (II) Using input driver 'libinput' for 'Power Button'
[    31.543] (**) Power Button: always reports core events
[    31.543] (**) Option "Device" "/dev/input/event2"
[    31.587] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    31.588] (II) event2  - Power Button: device is a keyboard
[    31.590] (II) event2  - Power Button: device removed
[    31.606] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    31.607] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.607] (**) Option "xkb_model" "pc105"
[    31.607] (**) Option "xkb_layout" "us,ru"
[    31.607] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    31.801] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    31.801] (II) event2  - Power Button: device is a keyboard
[    31.806] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    31.806] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    31.806] (**) Video Bus: Applying InputClass "system-keyboard"
[    31.806] (II) Using input driver 'libinput' for 'Video Bus'
[    31.806] (**) Video Bus: always reports core events
[    31.806] (**) Option "Device" "/dev/input/event5"
[    31.814] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    31.815] (II) event5  - Video Bus: device is a keyboard
[    31.816] (II) event5  - Video Bus: device removed
[    31.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[    31.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.863] (**) Option "xkb_model" "pc105"
[    31.863] (**) Option "xkb_layout" "us,ru"
[    31.864] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    31.875] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    31.876] (II) event5  - Video Bus: device is a keyboard
[    31.883] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    31.883] (II) No input driver specified, ignoring this device.
[    31.883] (II) This device may have been added with another device file.
[    31.889] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    31.889] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    31.889] (**) Sleep Button: Applying InputClass "system-keyboard"
[    31.889] (II) Using input driver 'libinput' for 'Sleep Button'
[    31.889] (**) Sleep Button: always reports core events
[    31.889] (**) Option "Device" "/dev/input/event0"
[    31.896] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    31.897] (II) event0  - Sleep Button: device is a keyboard
[    31.899] (II) event0  - Sleep Button: device removed
[    31.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    31.910] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    31.910] (**) Option "xkb_model" "pc105"
[    31.910] (**) Option "xkb_layout" "us,ru"
[    31.910] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    31.919] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    31.919] (II) event0  - Sleep Button: device is a keyboard
[    31.931] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event9)
[    31.931] (II) No input driver specified, ignoring this device.
[    31.931] (II) This device may have been added with another device file.
[    31.935] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    31.935] (II) No input driver specified, ignoring this device.
[    31.935] (II) This device may have been added with another device file.
[    31.938] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event11)
[    31.938] (II) No input driver specified, ignoring this device.
[    31.938] (II) This device may have been added with another device file.
[    31.941] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    31.941] (II) No input driver specified, ignoring this device.
[    31.942] (II) This device may have been added with another device file.
[    31.946] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    31.946] (II) No input driver specified, ignoring this device.
[    31.946] (II) This device may have been added with another device file.
[    31.949] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    31.949] (II) No input driver specified, ignoring this device.
[    31.949] (II) This device may have been added with another device file.
[    31.952] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    31.952] (II) No input driver specified, ignoring this device.
[    31.952] (II) This device may have been added with another device file.
[    31.956] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    31.957] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    31.957] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    31.957] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    31.957] (**) AT Translated Set 2 keyboard: always reports core events
[    31.957] (**) Option "Device" "/dev/input/event4"
[    31.964] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    31.965] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    31.971] (II) event4  - AT Translated Set 2 keyboard: device removed
[    31.987] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    31.987] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    31.987] (**) Option "xkb_model" "pc105"
[    31.987] (**) Option "xkb_layout" "us,ru"
[    31.987] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    31.996] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    31.998] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    32.007] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    32.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    32.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    32.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[    32.008] (II) LoadModule: "synaptics"
[    32.008] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    32.010] (II) Module synaptics: vendor="X.Org Foundation"
[    32.010] 	compiled for 1.21.1.13, module version = 1.9.2
[    32.010] 	Module class: X.Org XInput Driver
[    32.010] 	ABI class: X.Org XInput driver, version 24.4
[    32.010] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    32.010] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.010] (**) Option "Device" "/dev/input/event7"
[    32.050] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    32.050] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1232 - 5712 (res 53)
[    32.050] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1074 - 4780 (res 73)
[    32.050] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    32.050] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    32.050] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    32.050] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    32.050] (**) Option "FingerLow" "30"
[    32.050] (**) Option "FingerHigh" "50"
[    32.050] (**) Option "MaxTapTime" "125"
[    32.051] (**) Option "EmulateTwoFingerMinZ" "40"
[    32.051] (**) Option "EmulateTwoFingerMinW" "8"
[    32.051] (**) Option "VertEdgeScroll" "on"
[    32.051] (**) Option "HorizEdgeScroll" "on"
[    32.051] (**) Option "VertTwoFingerScroll" "on"
[    32.051] (**) Option "HorizTwoFingerScroll" "on"
[    32.051] (**) Option "TouchpadOff" "1"
[    32.051] (**) Option "TapButton1" "1"
[    32.051] (**) Option "TapButton2" "3"
[    32.051] (**) Option "TapButton3" "2"
[    32.051] (**) Option "CircularScrolling" "on"
[    32.051] (**) Option "CircScrollTrigger" "2"
[    32.051] (**) Option "CoastingSpeed" "0"
[    32.051] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    32.051] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    32.051] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.087] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[    32.087] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    32.087] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    32.087] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    32.087] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[    32.089] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    32.089] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    32.089] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    32.089] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    32.089] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    32.101] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    32.102] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    32.108] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[    32.108] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    32.108] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    32.108] (**) TPPS/2 IBM TrackPoint: always reports core events
[    32.108] (**) Option "Device" "/dev/input/event8"
[    32.120] (II) event8  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    32.123] (II) event8  - TPPS/2 IBM TrackPoint: device is a pointer
[    32.129] (II) event8  - TPPS/2 IBM TrackPoint: device removed
[    32.163] (II) libinput: TPPS/2 IBM TrackPoint: Step value 0 was provided, libinput Fallback acceleration function is used.
[    32.163] (II) libinput: TPPS/2 IBM TrackPoint: Step value 0 was provided, libinput Fallback acceleration function is used.
[    32.163] (II) libinput: TPPS/2 IBM TrackPoint: Step value 0 was provided, libinput Fallback acceleration function is used.
[    32.163] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input9/event8"
[    32.163] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11)
[    32.165] (**) Option "AccelerationScheme" "none"
[    32.165] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    32.165] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    32.165] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    32.173] (II) event8  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    32.175] (II) event8  - TPPS/2 IBM TrackPoint: device is a pointer
[    32.184] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    32.184] (II) No input driver specified, ignoring this device.
[    32.184] (II) This device may have been added with another device file.
[    32.187] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.187] (II) No input driver specified, ignoring this device.
[    32.187] (II) This device may have been added with another device file.
[    32.210] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event3)
[    32.211] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    32.211] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[    32.211] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    32.211] (**) ThinkPad Extra Buttons: always reports core events
[    32.211] (**) Option "Device" "/dev/input/event3"
[    32.216] (II) event3  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    32.217] (II) event3  - ThinkPad Extra Buttons: device is a keyboard
[    32.219] (II) event3  - ThinkPad Extra Buttons: device removed
[    32.230] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input3/event3"
[    32.230] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[    32.230] (**) Option "xkb_model" "pc105"
[    32.230] (**) Option "xkb_layout" "us,ru"
[    32.230] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    32.238] (II) event3  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    32.238] (II) event3  - ThinkPad Extra Buttons: device is a keyboard
[    32.357] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event11)
[    32.357] (II) No input driver specified, ignoring this device.
[    32.357] (II) This device may have been added with another device file.
[    32.360] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    32.360] (II) No input driver specified, ignoring this device.
[    32.360] (II) This device may have been added with another device file.
[    32.362] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event9)
[    32.362] (II) No input driver specified, ignoring this device.
[    32.362] (II) This device may have been added with another device file.
[    32.365] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    32.365] (II) No input driver specified, ignoring this device.
[    32.365] (II) This device may have been added with another device file.
[    32.368] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    32.369] (II) No input driver specified, ignoring this device.
[    32.369] (II) This device may have been added with another device file.
[    32.372] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    32.372] (II) No input driver specified, ignoring this device.
[    32.372] (II) This device may have been added with another device file.
[    32.375] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    32.376] (II) No input driver specified, ignoring this device.
[    32.376] (II) This device may have been added with another device file.

And I add variable into .xprofile

export LIBVA_DRIVER_NAME=iHD

My vainfo

[gena@gena-pc ~]$ vainfo
Trying display: wayland
Trying display: x11
vainfo: VA-API version: 1.22 (libva 2.22.0)
vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 24.4.3 ()
vainfo: Supported profile and entrypoints
      VAProfileNone                   :	VAEntrypointVideoProc
      VAProfileNone                   :	VAEntrypointStats
      VAProfileMPEG2Simple            :	VAEntrypointVLD
      VAProfileMPEG2Simple            :	VAEntrypointEncSlice
      VAProfileMPEG2Main              :	VAEntrypointVLD
      VAProfileMPEG2Main              :	VAEntrypointEncSlice
      VAProfileH264Main               :	VAEntrypointVLD
      VAProfileH264Main               :	VAEntrypointEncSlice
      VAProfileH264Main               :	VAEntrypointFEI
      VAProfileH264Main               :	VAEntrypointEncSliceLP
      VAProfileH264High               :	VAEntrypointVLD
      VAProfileH264High               :	VAEntrypointEncSlice
      VAProfileH264High               :	VAEntrypointFEI
      VAProfileH264High               :	VAEntrypointEncSliceLP
      VAProfileVC1Simple              :	VAEntrypointVLD
      VAProfileVC1Main                :	VAEntrypointVLD
      VAProfileVC1Advanced            :	VAEntrypointVLD
      VAProfileJPEGBaseline           :	VAEntrypointVLD
      VAProfileJPEGBaseline           :	VAEntrypointEncPicture
      VAProfileH264ConstrainedBaseline:	VAEntrypointVLD
      VAProfileH264ConstrainedBaseline:	VAEntrypointEncSlice
      VAProfileH264ConstrainedBaseline:	VAEntrypointFEI
      VAProfileH264ConstrainedBaseline:	VAEntrypointEncSliceLP
      VAProfileVP8Version0_3          :	VAEntrypointVLD
      VAProfileVP8Version0_3          :	VAEntrypointEncSlice
      VAProfileHEVCMain               :	VAEntrypointVLD
      VAProfileHEVCMain               :	VAEntrypointEncSlice
      VAProfileHEVCMain               :	VAEntrypointFEI
      VAProfileHEVCMain10             :	VAEntrypointVLD
      VAProfileHEVCMain10             :	VAEntrypointEncSlice
      VAProfileVP9Profile0            :	VAEntrypointVLD
      VAProfileVP9Profile2            :	VAEntrypointVLD

And my vdpauinfo

[gena@gena-pc ~]$ vdpauinfo
display: :0   screen: 0
Failed to open VDPAU backend libvdpau_va_gl.so: cannot open shared object file: No such file or directory
Error creating VDPAU device: 1

Offline

#8 2024-12-12 12:57:50

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,681

Re: Crash app with GPU acceleration

And my vdpauinfo

You don't want and typically don't have to use vdpau.
VAAPI looks ok.

Remove every xf86-video-* package, but the server log looks ok.

I have 100% CPU loading about 2-3 minutes and

Yes, but in what process? Check top or htop.

For example when printing by keyboard.

You mean when activating the print dialog?
Depends on what client that is and what it does at the time, but expensive™ tasks take more resources than simple ones.
This might also hinge on scanning for printers, disk IO, having to start cups etc. et pp.
Are you suggesting those dialogs started faster or w/o such "freeze" when using xf86-video-intel?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2024-12-12 13:13:30

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Re: Crash app with GPU acceleration

htop screenshot

I think that I get freezing and not normally cpu loading every time when the information on the screen changes. After all apps has been loaded, I have a 5-10% of cpu loading. But, for example, when I send a message in Telegram - I have not normally CPU loading and part of window with message repaint slowly

Offline

#10 2024-12-12 13:16:19

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Re: Crash app with GPU acceleration

seth wrote:

And my vdpauinfo

You don't want and typically don't have to use vdpau.
VAAPI looks ok.

Remove every xf86-video-* package, but the server log looks ok.

I have 100% CPU loading about 2-3 minutes and

Yes, but in what process? Check top or htop.

For example when printing by keyboard.

You mean when activating the print dialog?
Depends on what client that is and what it does at the time, but expensive™ tasks take more resources than simple ones.
This might also hinge on scanning for printers, disk IO, having to start cups etc. et pp.
Are you suggesting those dialogs started faster or w/o such "freeze" when using xf86-video-intel?

I have xf86-video-vesa package

[gena@gena-pc ~]$ pacman -Ss xf86-video-vesa
extra/xf86-video-vesa 2.6.0-2 (xorg-drivers xorg) [installed]
    X.org vesa video driver

Should I delete it?

Offline

#11 2024-12-12 13:32:50

aragorn22
Member
Registered: 2013-03-18
Posts: 17

Re: Crash app with GPU acceleration

seth wrote:

Are you suggesting those dialogs started faster or w/o such "freeze" when using xf86-video-intel?

With xf86-video-intel everything was rendered without any speed issues. Only crash sometimes.

Offline

#12 2024-12-12 18:22:53

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,681

Re: Crash app with GPU acceleration

Please don't bump, edit your previous post to mend it if nobody has yet replied.

Also don't post pictures of text, post the text - but the main CPU consumers are htop and esp. chrome - what's not unreasonable.

Should I delete it?

Yes, all of them.

With xf86-video-intel everything was rendered without any speed issues.

Does it help to run a compositor (picom, xcompmgr) to mitigate whatever you're expeiencing there?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB