You are not logged in.
Hi!
I've been using my Lenovo T430 with Arch Linux for many years now and always used the console to login in and later start XFCE.
I am also using a docking station with multiple monitors connected. Only since recently though, this setup stopped working for me.
The console shows up fine when running the laptop out of the dock or if only one external monitor is connected to the dock. However, if two or three external monitors are connected to the dock, I only see the output of GRUB and then nothing. I can login blindly and start XFCE though, and then have normal graphical output. Also, in the faulty situation, when I then disconnect the second external monitor, the console also shows up even though it did not in the beginning.
I tried downgrading the kernel, downgrading systemd and experimented with some settings of "video=" on the kernel command line. Unfortunately, nothing solved the issue so far.
The closest I got is: I can see a small difference in the kernel log when using one or two screens connected to the dock.
One line is only present in the failing setup (two screens):
graphics fbcon: hash matchesBelow find the kernel logs (one screen, two screens) with timestamps removed for convencience (easier to diff).
Does anyone have a clue on what could be wrong? Any help is greatly appreciated!
Regards
Kay
1 external screen (works):
Linux version 6.6.65-1-lts (linux-lts@archlinux) (gcc (GCC) 14.2.1 20240910, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Wed, 11 Dec 2024 15:35:54 +0000
Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/vgt430-root rw loglevel=3 quiet
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fe15fff] usable
BIOS-e820: [mem 0x000000007fe16000-0x00000000829fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
NX (Execute Disable) protection: active
APIC: Static calls initialized
SMBIOS 3.0.0 present.
DMI: LENOVO 2347A31/2347A31, BIOS CBET4000 2024-04-18 04/18/2024
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.179 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x47b600 max_arch_pfn = 0x400000000
MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7fe16 max_arch_pfn = 0x400000000
RAMDISK: [mem 0x35ba3000-0x36dc8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6050 000024 (v02 COREv4)
ACPI: XSDT 0x000000007FE410E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: FACP 0x000000007FE44C40 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: DSDT 0x000000007FE41280 0039B9 (v02 COREv4 COREBOOT 20141018 INTL 20230628)
ACPI: FACS 0x000000007FE41240 000040
ACPI: FACS 0x000000007FE41240 000040
ACPI: SSDT 0x000000007FE44D60 00177A (v02 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: MCFG 0x000000007FE464E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: TCPA 0x000000007FE46520 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: APIC 0x000000007FE46560 000072 (v03 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: DMAR 0x000000007FE465E0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: HPET 0x000000007FE466A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: Reserving FACP table memory at [mem 0x7fe44c40-0x7fe44d53]
ACPI: Reserving DSDT table memory at [mem 0x7fe41280-0x7fe44c38]
ACPI: Reserving FACS table memory at [mem 0x7fe41240-0x7fe4127f]
ACPI: Reserving FACS table memory at [mem 0x7fe41240-0x7fe4127f]
ACPI: Reserving SSDT table memory at [mem 0x7fe44d60-0x7fe464d9]
ACPI: Reserving MCFG table memory at [mem 0x7fe464e0-0x7fe4651b]
ACPI: Reserving TCPA table memory at [mem 0x7fe46520-0x7fe46551]
ACPI: Reserving APIC table memory at [mem 0x7fe46560-0x7fe465d1]
ACPI: Reserving DMAR table memory at [mem 0x7fe465e0-0x7fe4669f]
ACPI: Reserving HPET table memory at [mem 0x7fe466a0-0x7fe466d7]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047b5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007fe15fff]
node 0: [mem 0x0000000100000000-0x000000047b5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone Normal: 490 pages in unavailable ranges
On node 0, zone Normal: 18944 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
ACPI: PM-Timer IO Port: 0x508
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7fe16000-0x829fffff]
PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[mem 0x82a00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/vgt430-root rw loglevel=3 quiet
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 4109381
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 4.
Memory: 16277948K/16699088K available (16384K kernel code, 2132K rwdata, 13020K rodata, 3432K init, 3716K bss, 420880K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 49067 entries in 192 pages
ftrace: allocated 192 pages with 2 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
rcu: RCU priority boosting: priority 1 delay 500 ms.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
APIC: Switched APIC routing to: cluster x2apic
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564c0ef76a, max_idle_ns: 440795209025 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.53 BogoMIPS (lpj=8647263)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
SRBDS: Vulnerable: No microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 40K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
LSM support for eBPF active
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 1776
Estimated ratio of average max frequency by base frequency (times 1024): 1220
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (20761.15 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:51:50, date: 2024-12-15
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1734292310.046:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: _OSC evaluation for CPUs failed, trying _PDC
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_TZ_.THM0.FPWR: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0x47b600000-0xfffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xefc0-0xefff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfd1d0000-0xfd1dffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfd1c6000-0xfd1c600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfd1e0000-0xfd1fffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfd1cb000-0xfd1cbfff]
pci 0000:00:19.0: reg 0x18: [io 0xefa0-0xefbf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfd1c9000-0xfd1c93ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfd1cc000-0xfd1cffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfd1c8000-0xfd1c83ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xef78-0xef7f]
pci 0000:00:1f.2: reg 0x14: [io 0xef6c-0xef6f]
pci 0000:00:1f.2: reg 0x18: [io 0xef70-0xef77]
pci 0000:00:1f.2: reg 0x1c: [io 0xef68-0xef6b]
pci 0000:00:1f.2: reg 0x20: [io 0xef80-0xef9f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfd1ca000-0xfd1ca7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfd1c7000-0xfd1c70ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
pci 0000:01:00.0: reg 0x10: [mem 0xfd300000-0xfd3000ff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xfd200000-0xfd27ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfd280000-0xfd28ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.2: bridge window [mem 0xfd400000-0xfdbfffff]
pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 11
ACPI: PCI: Interrupt link LNKC configured for IRQ 11
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 11
ACPI: PCI: Interrupt link LNKF configured for IRQ 11
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x11
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1c.0: can't claim BAR 14 [mem 0xfd300000-0xfd3fffff]: no compatible bridge window
pci 0000:00:1c.1: can't claim BAR 14 [mem 0xfd200000-0xfd2fffff]: no compatible bridge window
pci 0000:00:1c.2: can't claim BAR 14 [mem 0xfd400000-0xfdbfffff]: no compatible bridge window
pci 0000:00:02.0: can't claim BAR 0 [mem 0xfdc00000-0xfdffffff 64bit]: no compatible bridge window
pci 0000:00:14.0: can't claim BAR 0 [mem 0xfd1d0000-0xfd1dffff 64bit]: no compatible bridge window
pci 0000:00:16.0: can't claim BAR 0 [mem 0xfd1c6000-0xfd1c600f 64bit]: no compatible bridge window
pci 0000:00:19.0: can't claim BAR 0 [mem 0xfd1e0000-0xfd1fffff]: no compatible bridge window
pci 0000:00:19.0: can't claim BAR 1 [mem 0xfd1cb000-0xfd1cbfff]: no compatible bridge window
pci 0000:00:1a.0: can't claim BAR 0 [mem 0xfd1c9000-0xfd1c93ff]: no compatible bridge window
pci 0000:00:1b.0: can't claim BAR 0 [mem 0xfd1cc000-0xfd1cffff 64bit]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 0 [mem 0xfd300000-0xfd3000ff]: no compatible bridge window
pci 0000:02:00.0: can't claim BAR 0 [mem 0xfd200000-0xfd27ffff 64bit]: no compatible bridge window
pci 0000:00:1d.0: can't claim BAR 0 [mem 0xfd1c8000-0xfd1c83ff]: no compatible bridge window
pci 0000:00:1f.2: can't claim BAR 5 [mem 0xfd1ca000-0xfd1ca7ff]: no compatible bridge window
pci 0000:00:1f.3: can't claim BAR 0 [mem 0xfd1c7000-0xfd1c70ff 64bit]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fe16000-0x7fffffff]
e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0x20000000-0x201fffff] could not be reserved
system 00:01: [mem 0x40000000-0x401fffff] could not be reserved
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: [io 0x0500-0x057f] has been reserved
system 00:03: [io 0x0480-0x04bf] has been reserved
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:02:00.0: can't claim BAR 6 [mem 0xfd280000-0xfd28ffff pref]: no compatible bridge window
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-0b] add_size 200000 add_align 100000
pci 0000:00:02.0: BAR 0: assigned [mem 0x47b800000-0x47bbfffff 64bit]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x82a00000-0x82afffff]
pci 0000:00:1c.1: BAR 14: assigned [mem 0x82b00000-0x82bfffff]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x82c00000-0x82dfffff]
pci 0000:00:19.0: BAR 0: assigned [mem 0x82e00000-0x82e1ffff]
pci 0000:00:14.0: BAR 0: assigned [mem 0x47b600000-0x47b60ffff 64bit]
pci 0000:00:1b.0: BAR 0: assigned [mem 0x47b610000-0x47b613fff 64bit]
pci 0000:00:19.0: BAR 1: assigned [mem 0x82e20000-0x82e20fff]
pci 0000:00:1f.2: BAR 5: assigned [mem 0x82e21000-0x82e217ff]
pci 0000:00:1a.0: BAR 0: assigned [mem 0x82e21800-0x82e21bff]
pci 0000:00:1d.0: BAR 0: assigned [mem 0x82e21c00-0x82e21fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x47b614000-0x47b6140ff 64bit]
pci 0000:00:16.0: BAR 0: assigned [mem 0x47b614100-0x47b61410f 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0x82a00000-0x82a000ff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x82b00000-0x82b7ffff 64bit]
pci 0000:02:00.0: BAR 6: assigned [mem 0x82b80000-0x82b8ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.2: bridge window [mem 0x82c00000-0x82dfffff]
pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000c3fff window]
pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000fffff window]
pci_bus 0000:00: resource 8 [mem 0x82a00000-0xefffffff window]
pci_bus 0000:00: resource 9 [mem 0x47b600000-0xfffffffff window]
pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0x82c00000-0x82dfffff]
pci_bus 0000:03: resource 2 [mem 0xff0000000-0xfffffffff 64bit pref]
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000007be16000-0x000000007fe16000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input1
ACPI: button: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THM0] (54 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: thermal: Thermal Zone [THM1] (27 C)
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: battery: Slot [BAT0] (battery present)
ACPI: battery: Slot [BAT1] (battery absent)
tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78)
Freeing initrd memory: 18584K
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21100 irq 29
ata2: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21180 irq 29
ata3: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21200 irq 29
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21300 irq 29
ata6: DUMMY
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
rtc_cmos 00:04: RTC can wake from S4
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2024-12-15T19:51:50 UTC (1734292310)
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
ehci-pci 0000:00:1d.0: irq 18, io mem 0x82e21c00
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xa0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.65-1-lts ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1a.0: debug port 2
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
ehci-pci 0000:00:1a.0: irq 19, io mem 0x82e21800
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (383687768, 301036)->(390049055, -6060251)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 36f85e07725984d7ab01e75fc495ceffe2bb7450'
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 6.6.65-1-lts ehci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
zswap: loaded using pool zstd/zsmalloc
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Key type .fscrypt registered
Key type fscrypt-provisioning registered
PM: Magic number: 4:520:900
usb usb2-port1: hash matches
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: CT1000MX500SSD1, M3CR023, max UDMA/133
ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: Features: Trust Dev-Sleep
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA CT1000MX500SSD1 023 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sda: sda1 sda2
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.8: new high-speed USB device number 3 using ehci-pci
usb 2-1.4: new full-speed USB device number 3 using ehci-pci
usb 1-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
usb 1-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.8:1.0: USB hub found
hub 1-1.8:1.0: 6 ports detected
usb 2-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: BCM20702A0
usb 2-1.4: Manufacturer: Broadcom Corp
usb 2-1.4: SerialNumber: E006E6B7B51D
tsc: Refined TSC clocksource calibration: 2594.106 MHz
usb 2-1.5: new full-speed USB device number 4 using ehci-pci
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
clocksource: Switched to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=311e, bcdDevice= 0.01
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: new high-speed USB device number 5 using ehci-pci
usb 1-1.8.1: new low-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Integrated Camera
usb 2-1.6: Manufacturer: Ricoh Company Ltd.
usb 1-1.8.1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.8.1: Product: USB Optical Mouse
usb 1-1.8.1: Manufacturer: PixArt
usb 1-1.8.2: new full-speed USB device number 5 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2028K
Freeing unused kernel image (initmem) memory: 3432K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (rodata/data gap) memory: 1316K
usb 1-1.8.2: New USB device found, idVendor=0c45, idProduct=8006, bcdDevice= 1.15
usb 1-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.8.2: Product: Gaming Keyboard
usb 1-1.8.2: Manufacturer: SONiX
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-linux-lts
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
acpi device:0d: registered as cooling_device5
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.6.65-1-lts xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.6.65-1-lts xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.1/1-1.8.1:1.0/0003:093A:2510.0001/input/input4
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.8.1/input0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
input: SONiX Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.0/0003:0C45:8006.0002/input/input5
sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
hid-generic 0003:0C45:8006.0002: input,hidraw1: USB HID v1.11 Keyboard [SONiX Gaming Keyboard] on usb-0000:00:1d.0-1.8.2/input0
input: SONiX Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input7
usb 3-3: new high-speed USB device number 2 using xhci_hcd
input: SONiX Gaming Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input8
input: SONiX Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input9
input: SONiX Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input10
input: SONiX Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input11
hid-generic 0003:0C45:8006.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [SONiX Gaming Keyboard] on usb-0000:00:1d.0-1.8.2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
fbcon: Taking over console
usb 3-3: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.20
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB2744
usb 3-3: Manufacturer: Microchip Tech
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
EXT4-fs (dm-1): mounted filesystem c8b11bd0-ea16-45d6-8576-e15da3fb694a r/w with ordered data mode. Quota mode: none.
Console: switching to colour frame buffer device 240x67
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-3: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.20
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-3: Product: USB5744
usb 4-3: Manufacturer: Microchip Tech
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
systemd[1]: systemd 257-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to <t430>.
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
usb 3-3.1: new high-speed USB device number 3 using xhci_hcd
usb 3-3.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 3-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-3.1: Product: USB 2.0 Hub
hub 3-3.1:1.0: USB hub found
hub 3-3.1:1.0: 4 ports detected
systemd[1]: bpf-restrict-fs: LSM BPF program attached
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice Slice /system/auto-backup.
systemd[1]: Created slice CUPS Slice.
systemd[1]: Created slice Slice /system/dirmngr.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/gpg-agent.
systemd[1]: Created slice Slice /system/gpg-agent-browser.
systemd[1]: Created slice Slice /system/gpg-agent-extra.
systemd[1]: Created slice Slice /system/gpg-agent-ssh.
systemd[1]: Created slice Slice /system/keyboxd.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Expecting device /dev/disk/by-uuid/a5a2fe35-c2fa-4881-b5a2-b314bf1cb511...
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Credential Encryption/Decryption.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Sockets.
systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Starting Load udev Rules from Credentials...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
fuse: init (API version 7.39)
loop: module loaded
EXT4-fs (dm-1): re-mounted c8b11bd0-ea16-45d6-8576-e15da3fb694a r/w. Quota mode: none.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd-journald[261]: Collecting audit messages is disabled.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module dm_mod.
systemd[1]: Started Journal Service.
systemd-journald[261]: Received client request to flush runtime journal.
Adding 8388604k swap on /dev/mapper/vgt430-swap. Priority:-2 extents:1 across:8388604k SS
mousedev: PS/2 mouse device common for all mice
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
lpc_ich: Resource conflict(s) found affecting gpio_ich
mc: Linux media interface: v0.10
input: PC Speaker as /devices/platform/pcspkr/input/input13
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-9: 2/2 memory slots populated (from DMI)
i2c i2c-9: Successfully instantiated SPD at 0x50
i2c i2c-9: Successfully instantiated SPD at 0x51
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
videodev: Linux video capture interface: v2.00
thinkpad_acpi: ThinkPad ACPI Extras v0.26
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS CBET4000 2024-04-18, EC G1HT35WW-3.22
thinkpad_acpi: Lenovo ThinkPad T430, model 2347A31
iTCO_vendor_support: vendor-support=0
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:ca:05:f2
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
at24 9-0050: supply vcc not found, using dummy regulator
at24 9-0050: 256 byte spd EEPROM, read-only
at24 9-0051: supply vcc not found, using dummy regulator
e1000e 0000:00:19.0 eno0: renamed from eth0
at24 9-0051: 256 byte spd EEPROM, read-only
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
cryptd: max_cpu_qlen set to 1000
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
usb 2-1.6: Found UVC 1.00 device Integrated Camera (5986:02d5)
usbcore: registered new interface driver uvcvideo
thinkpad_acpi: battery 1 registered (start 50, stop 81, behaviours: 0x1)
ACPI: battery: new extension: ThinkPad Battery Extension
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
usbcore: registered new interface driver btusb
ath: phy0: ASPM enabled: 0x43
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
Bluetooth: hci0: BCM20702A1 'brcm/BCM20702A1-0a5c-21e6.hcd' Patch
usbcore: registered new interface driver ath3k
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0x0000000051a21e1e, irq=17
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
usb 2-1.5: USB disconnect, device number 4
psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
usb 2-1.5: new full-speed USB device number 6 using ehci-pci
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=311e, bcdDevice= 0.02
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: Broadcom Bluetooth Device
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1757
Bluetooth: MGMT ver 1.22
u32 classifier
Performance counters on
input device check on
Actions configured
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input23
kvm_intel: L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
wlp2s0: authenticate with 44:4e:6d:70:05:e0
wlp2s0: send auth to 44:4e:6d:70:05:e0 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 44:4e:6d:70:05:e0 (try 1/3)
wlp2s0: RX AssocResp from 44:4e:6d:70:05:e0 (capab=0x1511 status=0 aid=1)
wlp2s0: associated
wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 44:4e:6d:70:05:e0
br-0607ab8a558a: port 1(vethb7bf4fb) entered blocking state
br-0607ab8a558a: port 1(vethb7bf4fb) entered disabled state
vethb7bf4fb: entered allmulticast mode
vethb7bf4fb: entered promiscuous mode
br-0607ab8a558a: port 1(vethb7bf4fb) entered blocking state
br-0607ab8a558a: port 1(vethb7bf4fb) entered forwarding state
br-0607ab8a558a: port 1(vethb7bf4fb) entered disabled state
br-0607ab8a558a: port 2(vethe4d27c0) entered blocking state
br-0607ab8a558a: port 2(vethe4d27c0) entered disabled state
vethe4d27c0: entered allmulticast mode
vethe4d27c0: entered promiscuous mode
br-0607ab8a558a: port 2(vethe4d27c0) entered blocking state
br-0607ab8a558a: port 2(vethe4d27c0) entered forwarding state
br-0607ab8a558a: port 2(vethe4d27c0) entered disabled state
br-0607ab8a558a: port 3(vethb100c47) entered blocking state
br-0607ab8a558a: port 3(vethb100c47) entered disabled state
vethb100c47: entered allmulticast mode
vethb100c47: entered promiscuous mode
br-0607ab8a558a: port 3(vethb100c47) entered blocking state
br-0607ab8a558a: port 3(vethb100c47) entered forwarding state
br-0607ab8a558a: port 3(vethb100c47) entered disabled state
br-0607ab8a558a: port 1(vethb7bf4fb) entered blocking state
br-0607ab8a558a: port 1(vethb7bf4fb) entered forwarding state
br-0607ab8a558a: port 2(vethe4d27c0) entered blocking state
br-0607ab8a558a: port 2(vethe4d27c0) entered forwarding state
br-0607ab8a558a: port 3(vethb100c47) entered blocking state
br-0607ab8a558a: port 3(vethb100c47) entered forwarding state
br-0607ab8a558a: port 1(vethb7bf4fb) entered disabled state
eth0: renamed from vethf6c1757
eth0: renamed from vethc7161e1
br-0607ab8a558a: port 2(vethe4d27c0) entered disabled state
br-0607ab8a558a: port 1(vethb7bf4fb) entered blocking state
br-0607ab8a558a: port 1(vethb7bf4fb) entered forwarding state
br-0607ab8a558a: port 2(vethe4d27c0) entered blocking state
br-0607ab8a558a: port 2(vethe4d27c0) entered forwarding state
br-0607ab8a558a: port 3(vethb100c47) entered disabled state
eth0: renamed from veth98fc86b
br-0607ab8a558a: port 3(vethb100c47) entered blocking state
br-0607ab8a558a: port 3(vethb100c47) entered forwarding state2 external screens (doesn't work):
Linux version 6.6.65-1-lts (linux-lts@archlinux) (gcc (GCC) 14.2.1 20240910, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Wed, 11 Dec 2024 15:35:54 +0000
Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/vgt430-root rw loglevel=3 quiet
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fe15fff] usable
BIOS-e820: [mem 0x000000007fe16000-0x00000000829fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
NX (Execute Disable) protection: active
APIC: Static calls initialized
SMBIOS 3.0.0 present.
DMI: LENOVO 2347A31/2347A31, BIOS CBET4000 2024-04-18 04/18/2024
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.104 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x47b600 max_arch_pfn = 0x400000000
MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7fe16 max_arch_pfn = 0x400000000
RAMDISK: [mem 0x35ba3000-0x36dc8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6050 000024 (v02 COREv4)
ACPI: XSDT 0x000000007FE410E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: FACP 0x000000007FE44C40 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: DSDT 0x000000007FE41280 0039B9 (v02 COREv4 COREBOOT 20141018 INTL 20230628)
ACPI: FACS 0x000000007FE41240 000040
ACPI: FACS 0x000000007FE41240 000040
ACPI: SSDT 0x000000007FE44D60 00177A (v02 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: MCFG 0x000000007FE464E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: TCPA 0x000000007FE46520 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: APIC 0x000000007FE46560 000072 (v03 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: DMAR 0x000000007FE465E0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: HPET 0x000000007FE466A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
ACPI: Reserving FACP table memory at [mem 0x7fe44c40-0x7fe44d53]
ACPI: Reserving DSDT table memory at [mem 0x7fe41280-0x7fe44c38]
ACPI: Reserving FACS table memory at [mem 0x7fe41240-0x7fe4127f]
ACPI: Reserving FACS table memory at [mem 0x7fe41240-0x7fe4127f]
ACPI: Reserving SSDT table memory at [mem 0x7fe44d60-0x7fe464d9]
ACPI: Reserving MCFG table memory at [mem 0x7fe464e0-0x7fe4651b]
ACPI: Reserving TCPA table memory at [mem 0x7fe46520-0x7fe46551]
ACPI: Reserving APIC table memory at [mem 0x7fe46560-0x7fe465d1]
ACPI: Reserving DMAR table memory at [mem 0x7fe465e0-0x7fe4669f]
ACPI: Reserving HPET table memory at [mem 0x7fe466a0-0x7fe466d7]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
NODE_DATA(0) allocated [mem 0x47b5f7000-0x47b5fbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047b5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007fe15fff]
node 0: [mem 0x0000000100000000-0x000000047b5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone Normal: 490 pages in unavailable ranges
On node 0, zone Normal: 18944 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
ACPI: PM-Timer IO Port: 0x508
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7fe16000-0x829fffff]
PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[mem 0x82a00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=/dev/mapper/vgt430-root rw loglevel=3 quiet
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 4109381
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 4.
Memory: 16277980K/16699088K available (16384K kernel code, 2132K rwdata, 13020K rodata, 3432K init, 3716K bss, 420848K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 49067 entries in 192 pages
ftrace: allocated 192 pages with 2 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
rcu: RCU priority boosting: priority 1 delay 500 ms.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
APIC: Switched APIC routing to: cluster x2apic
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25647a45c02, max_idle_ns: 440795287674 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.38 BogoMIPS (lpj=8647013)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
SRBDS: Vulnerable: No microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 40K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
LSM support for eBPF active
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 1776
Estimated ratio of average max frequency by base frequency (times 1024): 1220
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (20761.53 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:48:33, date: 2024-12-15
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1734292113.046:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: _OSC evaluation for CPUs failed, trying _PDC
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_TZ_.THM0.FPWR: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0x47b600000-0xfffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xefc0-0xefff]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfd1d0000-0xfd1dffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfd1c6000-0xfd1c600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfd1e0000-0xfd1fffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfd1cb000-0xfd1cbfff]
pci 0000:00:19.0: reg 0x18: [io 0xefa0-0xefbf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfd1c9000-0xfd1c93ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfd1cc000-0xfd1cffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfd1c8000-0xfd1c83ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xef78-0xef7f]
pci 0000:00:1f.2: reg 0x14: [io 0xef6c-0xef6f]
pci 0000:00:1f.2: reg 0x18: [io 0xef70-0xef77]
pci 0000:00:1f.2: reg 0x1c: [io 0xef68-0xef6b]
pci 0000:00:1f.2: reg 0x20: [io 0xef80-0xef9f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfd1ca000-0xfd1ca7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfd1c7000-0xfd1c70ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
pci 0000:01:00.0: reg 0x10: [mem 0xfd300000-0xfd3000ff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xfd200000-0xfd27ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfd280000-0xfd28ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.2: bridge window [mem 0xfd400000-0xfdbfffff]
pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 11
ACPI: PCI: Interrupt link LNKC configured for IRQ 11
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 11
ACPI: PCI: Interrupt link LNKF configured for IRQ 11
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x11
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1c.0: can't claim BAR 14 [mem 0xfd300000-0xfd3fffff]: no compatible bridge window
pci 0000:00:1c.1: can't claim BAR 14 [mem 0xfd200000-0xfd2fffff]: no compatible bridge window
pci 0000:00:1c.2: can't claim BAR 14 [mem 0xfd400000-0xfdbfffff]: no compatible bridge window
pci 0000:00:02.0: can't claim BAR 0 [mem 0xfdc00000-0xfdffffff 64bit]: no compatible bridge window
pci 0000:00:14.0: can't claim BAR 0 [mem 0xfd1d0000-0xfd1dffff 64bit]: no compatible bridge window
pci 0000:00:16.0: can't claim BAR 0 [mem 0xfd1c6000-0xfd1c600f 64bit]: no compatible bridge window
pci 0000:00:19.0: can't claim BAR 0 [mem 0xfd1e0000-0xfd1fffff]: no compatible bridge window
pci 0000:00:19.0: can't claim BAR 1 [mem 0xfd1cb000-0xfd1cbfff]: no compatible bridge window
pci 0000:00:1a.0: can't claim BAR 0 [mem 0xfd1c9000-0xfd1c93ff]: no compatible bridge window
pci 0000:00:1b.0: can't claim BAR 0 [mem 0xfd1cc000-0xfd1cffff 64bit]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 0 [mem 0xfd300000-0xfd3000ff]: no compatible bridge window
pci 0000:02:00.0: can't claim BAR 0 [mem 0xfd200000-0xfd27ffff 64bit]: no compatible bridge window
pci 0000:00:1d.0: can't claim BAR 0 [mem 0xfd1c8000-0xfd1c83ff]: no compatible bridge window
pci 0000:00:1f.2: can't claim BAR 5 [mem 0xfd1ca000-0xfd1ca7ff]: no compatible bridge window
pci 0000:00:1f.3: can't claim BAR 0 [mem 0xfd1c7000-0xfd1c70ff 64bit]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fe16000-0x7fffffff]
e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0x20000000-0x201fffff] could not be reserved
system 00:01: [mem 0x40000000-0x401fffff] could not be reserved
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: [io 0x0500-0x057f] has been reserved
system 00:03: [io 0x0480-0x04bf] has been reserved
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:02:00.0: can't claim BAR 6 [mem 0xfd280000-0xfd28ffff pref]: no compatible bridge window
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-0b] add_size 200000 add_align 100000
pci 0000:00:02.0: BAR 0: assigned [mem 0x47b800000-0x47bbfffff 64bit]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x82a00000-0x82afffff]
pci 0000:00:1c.1: BAR 14: assigned [mem 0x82b00000-0x82bfffff]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x82c00000-0x82dfffff]
pci 0000:00:19.0: BAR 0: assigned [mem 0x82e00000-0x82e1ffff]
pci 0000:00:14.0: BAR 0: assigned [mem 0x47b600000-0x47b60ffff 64bit]
pci 0000:00:1b.0: BAR 0: assigned [mem 0x47b610000-0x47b613fff 64bit]
pci 0000:00:19.0: BAR 1: assigned [mem 0x82e20000-0x82e20fff]
pci 0000:00:1f.2: BAR 5: assigned [mem 0x82e21000-0x82e217ff]
pci 0000:00:1a.0: BAR 0: assigned [mem 0x82e21800-0x82e21bff]
pci 0000:00:1d.0: BAR 0: assigned [mem 0x82e21c00-0x82e21fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x47b614000-0x47b6140ff 64bit]
pci 0000:00:16.0: BAR 0: assigned [mem 0x47b614100-0x47b61410f 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0x82a00000-0x82a000ff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x82b00000-0x82b7ffff 64bit]
pci 0000:02:00.0: BAR 6: assigned [mem 0x82b80000-0x82b8ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.2: bridge window [mem 0x82c00000-0x82dfffff]
pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000c3fff window]
pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000fffff window]
pci_bus 0000:00: resource 8 [mem 0x82a00000-0xefffffff window]
pci_bus 0000:00: resource 9 [mem 0x47b600000-0xfffffffff window]
pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0x82c00000-0x82dfffff]
pci_bus 0000:03: resource 2 [mem 0xff0000000-0xfffffffff 64bit pref]
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000007be16000-0x000000007fe16000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input1
ACPI: button: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THM0] (53 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: thermal: Thermal Zone [THM1] (27 C)
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: battery: Slot [BAT0] (battery present)
ACPI: battery: Slot [BAT1] (battery absent)
tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78)
Freeing initrd memory: 18584K
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21100 irq 29
ata2: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21180 irq 29
ata3: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21200 irq 29
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0x82e21000 port 0x82e21300 irq 29
ata6: DUMMY
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
rtc_cmos 00:04: RTC can wake from S4
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2024-12-15T19:48:33 UTC (1734292113)
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
ehci-pci 0000:00:1d.0: irq 18, io mem 0x82e21c00
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xa0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.65-1-lts ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1a.0: debug port 2
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
ehci-pci 0000:00:1a.0: irq 19, io mem 0x82e21800
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (387056414, 302723)->(393272995, -5913858)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 36f85e07725984d7ab01e75fc495ceffe2bb7450'
zswap: loaded using pool zstd/zsmalloc
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 6.6.65-1-lts ehci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Key type .fscrypt registered
Key type fscrypt-provisioning registered
PM: Magic number: 4:967:849
graphics fbcon: hash matches
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: CT1000MX500SSD1, M3CR023, max UDMA/133
ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: Features: Trust Dev-Sleep
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA CT1000MX500SSD1 023 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sda: sda1 sda2
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.8: new high-speed USB device number 3 using ehci-pci
usb 2-1.4: new full-speed USB device number 3 using ehci-pci
usb 1-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
usb 1-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.8:1.0: USB hub found
hub 1-1.8:1.0: 6 ports detected
usb 2-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: BCM20702A0
usb 2-1.4: Manufacturer: Broadcom Corp
usb 2-1.4: SerialNumber: E006E6B7B51D
tsc: Refined TSC clocksource calibration: 2594.103 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647996f9d, max_idle_ns: 440795318030 ns
clocksource: Switched to clocksource tsc
usb 2-1.5: new full-speed USB device number 4 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=311e, bcdDevice= 0.01
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: new high-speed USB device number 5 using ehci-pci
usb 1-1.8.1: new low-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Integrated Camera
usb 2-1.6: Manufacturer: Ricoh Company Ltd.
usb 1-1.8.1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.8.1: Product: USB Optical Mouse
usb 1-1.8.1: Manufacturer: PixArt
usb 1-1.8.2: new full-speed USB device number 5 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2028K
Freeing unused kernel image (initmem) memory: 3432K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (rodata/data gap) memory: 1316K
usb 1-1.8.2: New USB device found, idVendor=0c45, idProduct=8006, bcdDevice= 1.15
usb 1-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.8.2: Product: Gaming Keyboard
usb 1-1.8.2: Manufacturer: SONiX
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-linux-lts
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
acpi device:0d: registered as cooling_device5
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.6.65-1-lts xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.6.65-1-lts xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.1/1-1.8.1:1.0/0003:093A:2510.0001/input/input4
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.8.1/input0
input: SONiX Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.0/0003:0C45:8006.0002/input/input5
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
hid-generic 0003:0C45:8006.0002: input,hidraw1: USB HID v1.11 Keyboard [SONiX Gaming Keyboard] on usb-0000:00:1d.0-1.8.2/input0
input: SONiX Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input7
usb 3-3: new high-speed USB device number 2 using xhci_hcd
input: SONiX Gaming Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input8
input: SONiX Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input9
input: SONiX Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input10
input: SONiX Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.2/1-1.8.2:1.1/0003:0C45:8006.0003/input/input11
hid-generic 0003:0C45:8006.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [SONiX Gaming Keyboard] on usb-0000:00:1d.0-1.8.2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
fbcon: Taking over console
usb 3-3: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.20
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB2744
usb 3-3: Manufacturer: Microchip Tech
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
EXT4-fs (dm-1): mounted filesystem c8b11bd0-ea16-45d6-8576-e15da3fb694a r/w with ordered data mode. Quota mode: none.
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
Console: switching to colour frame buffer device 240x67
usb 4-3: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.20
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-3: Product: USB5744
usb 4-3: Manufacturer: Microchip Tech
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
systemd[1]: systemd 257-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to <t430>.
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
usb 3-3.1: new high-speed USB device number 3 using xhci_hcd
systemd[1]: bpf-restrict-fs: LSM BPF program attached
usb 3-3.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 3-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-3.1: Product: USB 2.0 Hub
hub 3-3.1:1.0: USB hub found
hub 3-3.1:1.0: 4 ports detected
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice Slice /system/auto-backup.
systemd[1]: Created slice CUPS Slice.
systemd[1]: Created slice Slice /system/dirmngr.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/gpg-agent.
systemd[1]: Created slice Slice /system/gpg-agent-browser.
systemd[1]: Created slice Slice /system/gpg-agent-extra.
systemd[1]: Created slice Slice /system/gpg-agent-ssh.
systemd[1]: Created slice Slice /system/keyboxd.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Expecting device /dev/disk/by-uuid/a5a2fe35-c2fa-4881-b5a2-b314bf1cb511...
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Credential Encryption/Decryption.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Sockets.
systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Starting Load udev Rules from Credentials...
systemd[1]: Starting Coldplug All udev Devices...
fuse: init (API version 7.39)
loop: module loaded
systemd-journald[263]: Collecting audit messages is disabled.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
EXT4-fs (dm-1): re-mounted c8b11bd0-ea16-45d6-8576-e15da3fb694a r/w. Quota mode: none.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Started Journal Service.
systemd-journald[263]: Received client request to flush runtime journal.
Adding 8388604k swap on /dev/mapper/vgt430-swap. Priority:-2 extents:1 across:8388604k SS
mousedev: PS/2 mouse device common for all mice
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Loading compiled-in X.509 certificates for regulatory database
thinkpad_acpi: ThinkPad ACPI Extras v0.26
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS CBET4000 2024-04-18, EC G1HT35WW-3.22
thinkpad_acpi: Lenovo ThinkPad T430, model 2347A31
input: PC Speaker as /devices/platform/pcspkr/input/input13
mc: Linux media interface: v0.10
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-9: 2/2 memory slots populated (from DMI)
i2c i2c-9: Successfully instantiated SPD at 0x50
i2c i2c-9: Successfully instantiated SPD at 0x51
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
thinkpad_acpi: battery 1 registered (start 50, stop 81, behaviours: 0x1)
ACPI: battery: new extension: ThinkPad Battery Extension
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:ca:05:f2
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
videodev: Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
usb 2-1.6: Found UVC 1.00 device Integrated Camera (5986:02d5)
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
at24 9-0050: supply vcc not found, using dummy regulator
usbcore: registered new interface driver uvcvideo
usbcore: registered new interface driver btusb
at24 9-0050: 256 byte spd EEPROM, read-only
cryptd: max_cpu_qlen set to 1000
at24 9-0051: supply vcc not found, using dummy regulator
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0x00000000db681cee, irq=17
at24 9-0051: 256 byte spd EEPROM, read-only
Bluetooth: hci0: BCM: chip id 63
iTCO_vendor_support: vendor-support=0
Bluetooth: hci0: BCM: features 0x07
e1000e 0000:00:19.0 eno0: renamed from eth0
iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
Bluetooth: hci0: BCM20702A1 'brcm/BCM20702A1-0a5c-21e6.hcd' Patch
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver ath3k
usb 2-1.5: USB disconnect, device number 4
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 2-1.5: new full-speed USB device number 6 using ehci-pci
8021q: 802.1Q VLAN Support v1.8
psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=311e, bcdDevice= 0.02
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input15
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bluetooth: hci0: BCM: features 0x07
Bluetooth: hci0: Broadcom Bluetooth Device
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1757
Bluetooth: MGMT ver 1.22
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
u32 classifier
Performance counters on
input device check on
Actions configured
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input23
kvm_intel: L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
br-0607ab8a558a: port 1(vetha1c8a2a) entered blocking state
br-0607ab8a558a: port 1(vetha1c8a2a) entered disabled state
vetha1c8a2a: entered allmulticast mode
vetha1c8a2a: entered promiscuous mode
br-0607ab8a558a: port 1(vetha1c8a2a) entered blocking state
br-0607ab8a558a: port 1(vetha1c8a2a) entered forwarding state
br-0607ab8a558a: port 1(vetha1c8a2a) entered disabled state
br-0607ab8a558a: port 2(veth335796a) entered blocking state
br-0607ab8a558a: port 2(veth335796a) entered disabled state
veth335796a: entered allmulticast mode
veth335796a: entered promiscuous mode
br-0607ab8a558a: port 2(veth335796a) entered blocking state
br-0607ab8a558a: port 2(veth335796a) entered forwarding state
br-0607ab8a558a: port 3(veth2a9cd88) entered blocking state
br-0607ab8a558a: port 3(veth2a9cd88) entered disabled state
veth2a9cd88: entered allmulticast mode
veth2a9cd88: entered promiscuous mode
br-0607ab8a558a: port 3(veth2a9cd88) entered blocking state
br-0607ab8a558a: port 3(veth2a9cd88) entered forwarding state
br-0607ab8a558a: port 2(veth335796a) entered disabled state
br-0607ab8a558a: port 3(veth2a9cd88) entered disabled state
br-0607ab8a558a: port 1(vetha1c8a2a) entered blocking state
br-0607ab8a558a: port 1(vetha1c8a2a) entered forwarding state
br-0607ab8a558a: port 2(veth335796a) entered blocking state
br-0607ab8a558a: port 2(veth335796a) entered forwarding state
br-0607ab8a558a: port 3(veth2a9cd88) entered blocking state
br-0607ab8a558a: port 3(veth2a9cd88) entered forwarding state
br-0607ab8a558a: port 1(vetha1c8a2a) entered disabled state
eth0: renamed from veth775494d
br-0607ab8a558a: port 1(vetha1c8a2a) entered blocking state
br-0607ab8a558a: port 1(vetha1c8a2a) entered forwarding state
br-0607ab8a558a: port 2(veth335796a) entered disabled state
eth0: renamed from veth7e83089
br-0607ab8a558a: port 2(veth335796a) entered blocking state
br-0607ab8a558a: port 2(veth335796a) entered forwarding state
br-0607ab8a558a: port 3(veth2a9cd88) entered disabled state
eth0: renamed from vetha822390
br-0607ab8a558a: port 3(veth2a9cd88) entered blocking state
br-0607ab8a558a: port 3(veth2a9cd88) entered forwarding state
wlp2s0: authenticate with 44:4e:6d:70:05:e0
wlp2s0: send auth to 44:4e:6d:70:05:e0 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 44:4e:6d:70:05:e0 (try 1/3)
wlp2s0: RX AssocResp from 44:4e:6d:70:05:e0 (capab=0x1511 status=0 aid=1)
wlp2s0: associated
wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 44:4e:6d:70:05:e0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11Offline
I found one more interesting thing:
If I add "video=HDMI-A-2:e" to the kernel command line via /etc/default/grub and start the laptop outside the dock, wait it to boot up and then put it into the docking station, HDMI-A-2 shows the console.
Without that kernel command line argument, this does not work.
However, this still does not solve the problem, sadly.
No ideas, anyone?
Offline